All of lore.kernel.org
 help / color / mirror / Atom feed
* [PATCH net-next 00/17] Introduce line card support for modular switch
@ 2022-04-18  6:42 Ido Schimmel
  2022-04-18  6:42 ` [PATCH net-next 01/17] devlink: add support to create line card and expose to user Ido Schimmel
                   ` (18 more replies)
  0 siblings, 19 replies; 22+ messages in thread
From: Ido Schimmel @ 2022-04-18  6:42 UTC (permalink / raw)
  To: netdev
  Cc: davem, kuba, pabeni, jiri, vadimp, petrm, andrew, dsahern, mlxsw,
	Ido Schimmel

Jiri says:

This patchset introduces support for modular switch systems and also
introduces mlxsw support for NVIDIA Mellanox SN4800 modular switch.
It contains 8 slots to accommodate line cards - replaceable PHY modules
which may contain gearboxes.
Currently supported line card:
16X 100GbE (QSFP28)
Other line cards that are going to be supported:
8X 200GbE (QSFP56)
4X 400GbE (QSFP-DD)
There may be other types of line cards added in the future.

To be consistent with the port split configuration (splitter cabels),
the line card entities are treated in the similar way. The nature of
a line card is not "a pluggable device", but "a pluggable PHY module".

A concept of "provisioning" is introduced. The user may "provision"
certain slot with a line card type. Driver then creates all instances
(devlink ports, netdevices, etc) related to this line card type. It does
not matter if the line card is plugged-in at the time. User is able to
configure netdevices, devlink ports, setup port splitters, etc. From the
perspective of the switch ASIC, all is present and can be configured.

The carrier of netdevices stays down if the line card is not plugged-in.
Once the line card is inserted and activated, the carrier of
the related netdevices is then reflecting the physical line state,
same as for an ordinary fixed port.

Once user does not want to use the line card related instances
anymore, he can "unprovision" the slot. Driver then removes the
instances.

Patches 1-4 are extending devlink driver API and UAPI in order to
register, show, dump, provision and activate the line card.
Patches 5-17 are implementing the introduced API in mlxsw.
The last patch adds a selftest for mlxsw line cards.

Example:
$ devlink port # No ports are listed
$ devlink lc
pci/0000:01:00.0:
  lc 1 state unprovisioned
    supported_types:
       16x100G
  lc 2 state unprovisioned
    supported_types:
       16x100G
  lc 3 state unprovisioned
    supported_types:
       16x100G
  lc 4 state unprovisioned
    supported_types:
       16x100G
  lc 5 state unprovisioned
    supported_types:
       16x100G
  lc 6 state unprovisioned
    supported_types:
       16x100G
  lc 7 state unprovisioned
    supported_types:
       16x100G
  lc 8 state unprovisioned
    supported_types:
       16x100G

Note that driver exposes list supported line card types. Currently
there is only one: "16x100G".

To provision the slot #8:

$ devlink lc set pci/0000:01:00.0 lc 8 type 16x100G
$ devlink lc show pci/0000:01:00.0 lc 8
pci/0000:01:00.0:
  lc 8 state active type 16x100G
    supported_types:
       16x100G
$ devlink port
pci/0000:01:00.0/0: type notset flavour cpu port 0 splittable false
pci/0000:01:00.0/53: type eth netdev enp1s0nl8p1 flavour physical lc 8 port 1 splittable true lanes 4
pci/0000:01:00.0/54: type eth netdev enp1s0nl8p2 flavour physical lc 8 port 2 splittable true lanes 4
pci/0000:01:00.0/55: type eth netdev enp1s0nl8p3 flavour physical lc 8 port 3 splittable true lanes 4
pci/0000:01:00.0/56: type eth netdev enp1s0nl8p4 flavour physical lc 8 port 4 splittable true lanes 4
pci/0000:01:00.0/57: type eth netdev enp1s0nl8p5 flavour physical lc 8 port 5 splittable true lanes 4
pci/0000:01:00.0/58: type eth netdev enp1s0nl8p6 flavour physical lc 8 port 6 splittable true lanes 4
pci/0000:01:00.0/59: type eth netdev enp1s0nl8p7 flavour physical lc 8 port 7 splittable true lanes 4
pci/0000:01:00.0/60: type eth netdev enp1s0nl8p8 flavour physical lc 8 port 8 splittable true lanes 4
pci/0000:01:00.0/61: type eth netdev enp1s0nl8p9 flavour physical lc 8 port 9 splittable true lanes 4
pci/0000:01:00.0/62: type eth netdev enp1s0nl8p10 flavour physical lc 8 port 10 splittable true lanes 4
pci/0000:01:00.0/63: type eth netdev enp1s0nl8p11 flavour physical lc 8 port 11 splittable true lanes 4
pci/0000:01:00.0/64: type eth netdev enp1s0nl8p12 flavour physical lc 8 port 12 splittable true lanes 4
pci/0000:01:00.0/125: type eth netdev enp1s0nl8p13 flavour physical lc 8 port 13 splittable true lanes 4
pci/0000:01:00.0/126: type eth netdev enp1s0nl8p14 flavour physical lc 8 port 14 splittable true lanes 4
pci/0000:01:00.0/127: type eth netdev enp1s0nl8p15 flavour physical lc 8 port 15 splittable true lanes 4
pci/0000:01:00.0/128: type eth netdev enp1s0nl8p16 flavour physical lc 8 port 16 splittable true lanes 4

To uprovision the slot #8:

$ devlink lc set pci/0000:01:00.0 lc 8 notype

Jiri Pirko (17):
  devlink: add support to create line card and expose to user
  devlink: implement line card provisioning
  devlink: implement line card active state
  devlink: add port to line card relationship set
  mlxsw: spectrum: Allow lane to start from non-zero index
  mlxsw: spectrum: Allocate port mapping array of structs instead of
    pointers
  mlxsw: reg: Add Ports Mapping Event Configuration Register
  mlxsw: Narrow the critical section of devl_lock during ports
    creation/removal
  mlxsw: spectrum: Introduce port mapping change event processing
  mlxsw: reg: Add Management DownStream Device Query Register
  mlxsw: reg: Add Management DownStream Device Control Register
  mlxsw: reg: Add Management Binary Code Transfer Register
  mlxsw: core_linecards: Add line card objects and implement
    provisioning
  mlxsw: core_linecards: Implement line card activation process
  mlxsw: core: Extend driver ops by remove selected ports op
  mlxsw: spectrum: Add port to linecard mapping
  selftests: mlxsw: Introduce devlink line card
    provision/unprovision/activation tests

 .../networking/devlink/devlink-linecard.rst   |  122 ++
 Documentation/networking/devlink/index.rst    |    1 +
 drivers/net/ethernet/mellanox/mlxsw/Makefile  |    3 +-
 drivers/net/ethernet/mellanox/mlxsw/core.c    |   56 +-
 drivers/net/ethernet/mellanox/mlxsw/core.h    |   62 +-
 .../ethernet/mellanox/mlxsw/core_linecards.c  | 1005 +++++++++++++++++
 drivers/net/ethernet/mellanox/mlxsw/minimal.c |   15 +-
 drivers/net/ethernet/mellanox/mlxsw/reg.h     |  376 ++++++
 .../net/ethernet/mellanox/mlxsw/spectrum.c    |  283 ++++-
 .../net/ethernet/mellanox/mlxsw/spectrum.h    |   10 +-
 .../mellanox/mlxsw/spectrum_ethtool.c         |   37 +-
 drivers/net/ethernet/mellanox/mlxsw/trap.h    |    6 +
 include/net/devlink.h                         |   48 +
 include/uapi/linux/devlink.h                  |   23 +
 net/core/devlink.c                            |  653 ++++++++++-
 .../drivers/net/mlxsw/devlink_linecard.sh     |  280 +++++
 16 files changed, 2896 insertions(+), 84 deletions(-)
 create mode 100644 Documentation/networking/devlink/devlink-linecard.rst
 create mode 100644 drivers/net/ethernet/mellanox/mlxsw/core_linecards.c
 create mode 100755 tools/testing/selftests/drivers/net/mlxsw/devlink_linecard.sh

-- 
2.33.1


^ permalink raw reply	[flat|nested] 22+ messages in thread

end of thread, other threads:[~2022-04-19 12:58 UTC | newest]

Thread overview: 22+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2022-04-18  6:42 [PATCH net-next 00/17] Introduce line card support for modular switch Ido Schimmel
2022-04-18  6:42 ` [PATCH net-next 01/17] devlink: add support to create line card and expose to user Ido Schimmel
2022-04-18  6:42 ` [PATCH net-next 02/17] devlink: implement line card provisioning Ido Schimmel
2022-04-18  6:42 ` [PATCH net-next 03/17] devlink: implement line card active state Ido Schimmel
2022-04-18  6:42 ` [PATCH net-next 04/17] devlink: add port to line card relationship set Ido Schimmel
2022-04-18  6:42 ` [PATCH net-next 05/17] mlxsw: spectrum: Allow lane to start from non-zero index Ido Schimmel
2022-04-18  6:42 ` [PATCH net-next 06/17] mlxsw: spectrum: Allocate port mapping array of structs instead of pointers Ido Schimmel
2022-04-18  6:42 ` [PATCH net-next 07/17] mlxsw: reg: Add Ports Mapping Event Configuration Register Ido Schimmel
2022-04-18  6:42 ` [PATCH net-next 08/17] mlxsw: Narrow the critical section of devl_lock during ports creation/removal Ido Schimmel
2022-04-18  6:42 ` [PATCH net-next 09/17] mlxsw: spectrum: Introduce port mapping change event processing Ido Schimmel
2022-04-18  6:42 ` [PATCH net-next 10/17] mlxsw: reg: Add Management DownStream Device Query Register Ido Schimmel
2022-04-18  6:42 ` [PATCH net-next 11/17] mlxsw: reg: Add Management DownStream Device Control Register Ido Schimmel
2022-04-18  6:42 ` [PATCH net-next 12/17] mlxsw: reg: Add Management Binary Code Transfer Register Ido Schimmel
2022-04-18  6:42 ` [PATCH net-next 13/17] mlxsw: core_linecards: Add line card objects and implement provisioning Ido Schimmel
2022-04-18  6:42 ` [PATCH net-next 14/17] mlxsw: core_linecards: Implement line card activation process Ido Schimmel
2022-04-18  6:42 ` [PATCH net-next 15/17] mlxsw: core: Extend driver ops by remove selected ports op Ido Schimmel
2022-04-18  6:42 ` [PATCH net-next 16/17] mlxsw: spectrum: Add port to linecard mapping Ido Schimmel
2022-04-18  6:42 ` [PATCH net-next 17/17] selftests: mlxsw: Introduce devlink line card provision/unprovision/activation tests Ido Schimmel
2022-04-18 10:10 ` [PATCH net-next 00/17] Introduce line card support for modular switch patchwork-bot+netdevbpf
2022-04-18 14:31 ` David Ahern
2022-04-19 11:55   ` Jiri Pirko
2022-04-19 12:58     ` Ido Schimmel

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.