From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id 534E8C433FE for ; Fri, 15 Apr 2022 10:57:49 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1352512AbiDOLAP (ORCPT ); Fri, 15 Apr 2022 07:00:15 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:56144 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1351321AbiDOLAO (ORCPT ); Fri, 15 Apr 2022 07:00:14 -0400 Received: from perceval.ideasonboard.com (perceval.ideasonboard.com [IPv6:2001:4b98:dc2:55:216:3eff:fef7:d647]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 39A88BD7F7 for ; Fri, 15 Apr 2022 03:57:45 -0700 (PDT) Received: from pendragon.ideasonboard.com (85-76-71-107-nat.elisa-mobile.fi [85.76.71.107]) by perceval.ideasonboard.com (Postfix) with ESMTPSA id 63923482; Fri, 15 Apr 2022 12:57:42 +0200 (CEST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/simple; d=ideasonboard.com; s=mail; t=1650020263; bh=5w1HV6LLTUEmMD3m/5q+u5jFf0NNyZggpuDRIj/j6LY=; h=Date:From:To:Cc:Subject:References:In-Reply-To:From; b=pHUHp01wtRuBfzo1XTA4yeY1rgaGUW/HgXF/AaJi/FRVUO6e/+sY3NpDXLiKmwGQU YfyP75bQ6x7OGFZ7JlYXp7NWF1mBPpLXpRf+EUuzORuvRgOqPI8HPuWlKpBrjyEAWY SoWrd2U81aoj0wOrZhGXJDS4ff6cak4aY4CorsKY= Date: Fri, 15 Apr 2022 13:57:39 +0300 From: Laurent Pinchart To: Biju Das Cc: David Airlie , Daniel Vetter , Philipp Zabel , Chris Paterson , Geert Uytterhoeven , Prabhakar Mahadev Lad , dri-devel@lists.freedesktop.org, Biju Das , linux-renesas-soc@vger.kernel.org, Kieran Bingham Subject: Re: [PATCH v2 2/2] drm: rcar-du: Add RZ/G2L DSI driver Message-ID: References: <20220328065115.11724-1-biju.das.jz@bp.renesas.com> MIME-Version: 1.0 Content-Type: text/plain; charset=utf-8 Content-Disposition: inline In-Reply-To: <20220328065115.11724-1-biju.das.jz@bp.renesas.com> Precedence: bulk List-ID: X-Mailing-List: linux-renesas-soc@vger.kernel.org Hi Biju, Thank you for the patch. On Mon, Mar 28, 2022 at 07:51:15AM +0100, Biju Das wrote: > This driver supports the MIPI DSI encoder found in the RZ/G2L > SoC. It currently supports DSI mode only. > > Signed-off-by: Biju Das > --- > v1->v2: > * Rework based on dt-binding change (DSI + D-PHY) as single block > * Replaced link_mmio and phy_mmio with mmio in struct rzg2l_mipi_dsi > * Replaced rzg2l_mipi_phy_write with rzg2l_mipi_dsi_phy_write > and rzg2l_mipi_dsi_link_write > * Replaced rzg2l_mipi_phy_read->rzg2l_mipi_dsi_link_read > RFC->v1: > * Added "depends on ARCH_RENESAS || COMPILE_TEST" on KCONFIG > and dropped DRM as it is implied by DRM_BRIDGE > * Used devm_reset_control_get_exclusive() for reset handle > * Removed bool hsclkmode from struct rzg2l_mipi_dsi > * Added error check for pm, using pm_runtime_resume_and_get() instead of > pm_runtime_get_sync() > * Added check for unsupported formats in rzg2l_mipi_dsi_host_attach() > * Avoided read-modify-write stopping hsclock > * Used devm_platform_ioremap_resource for resource allocation > * Removed unnecessary assert call from probe and remove. > * wrap the line after the PTR_ERR() in probe() > * Updated reset failure messages in probe > * Fixed the typo arstc->prstc > * Made hex constants to lower case. > RFC: > * https://patchwork.kernel.org/project/linux-renesas-soc/patch/20220112174612.10773-23-biju.das.jz@bp.renesas.com/ > --- > drivers/gpu/drm/rcar-du/Kconfig | 8 + > drivers/gpu/drm/rcar-du/Makefile | 1 + > drivers/gpu/drm/rcar-du/rzg2l_mipi_dsi.c | 686 ++++++++++++++++++ > drivers/gpu/drm/rcar-du/rzg2l_mipi_dsi_regs.h | 149 ++++ > 4 files changed, 844 insertions(+) > create mode 100644 drivers/gpu/drm/rcar-du/rzg2l_mipi_dsi.c > create mode 100644 drivers/gpu/drm/rcar-du/rzg2l_mipi_dsi_regs.h > > diff --git a/drivers/gpu/drm/rcar-du/Kconfig b/drivers/gpu/drm/rcar-du/Kconfig > index e40fb0c53f9b..83d7d28214a0 100644 > --- a/drivers/gpu/drm/rcar-du/Kconfig > +++ b/drivers/gpu/drm/rcar-du/Kconfig > @@ -64,6 +64,14 @@ config DRM_RCAR_MIPI_DSI > help > Enable support for the R-Car Display Unit embedded MIPI DSI encoders. > > +config DRM_RZG2L_MIPI_DSI > + tristate "RZ/G2L MIPI DSI Encoder Support" > + depends on DRM_BRIDGE && OF > + depends on ARCH_RENESAS || COMPILE_TEST > + select DRM_MIPI_DSI > + help > + Enable support for the RZ/G2L Display Unit embedded MIPI DSI encoders. > + > config DRM_RCAR_VSP > bool "R-Car DU VSP Compositor Support" if ARM > default y if ARM64 > diff --git a/drivers/gpu/drm/rcar-du/Makefile b/drivers/gpu/drm/rcar-du/Makefile > index 01ba78e56b53..7fb4f8717fc4 100644 > --- a/drivers/gpu/drm/rcar-du/Makefile > +++ b/drivers/gpu/drm/rcar-du/Makefile > @@ -27,6 +27,7 @@ obj-$(CONFIG_DRM_RCAR_LVDS) += rcar_lvds.o > obj-$(CONFIG_DRM_RCAR_MIPI_DSI) += rcar_mipi_dsi.o > > obj-$(CONFIG_DRM_RZG2L_DU) += rzg2l-du-drm.o > +obj-$(CONFIG_DRM_RZG2L_MIPI_DSI) += rzg2l_mipi_dsi.o > > # 'remote-endpoint' is fixed up at run-time > DTC_FLAGS_rcar_du_of_lvds_r8a7790 += -Wno-graph_endpoint > diff --git a/drivers/gpu/drm/rcar-du/rzg2l_mipi_dsi.c b/drivers/gpu/drm/rcar-du/rzg2l_mipi_dsi.c > new file mode 100644 > index 000000000000..3b785041ba5e > --- /dev/null > +++ b/drivers/gpu/drm/rcar-du/rzg2l_mipi_dsi.c > @@ -0,0 +1,686 @@ > +// SPDX-License-Identifier: GPL-2.0 > +/* > + * RZ/G2L MIPI DSI Encoder Driver > + * > + * Copyright (C) 2022 Renesas Electronics Corporation > + */ > +#include > +#include > +#include > +#include > +#include > +#include > +#include > +#include > +#include > +#include > +#include > +#include > + > +#include > +#include > +#include > +#include > +#include > +#include > +#include > + > +#include "rzg2l_mipi_dsi_regs.h" > + > +struct rzg2l_mipi_dsi { > + struct device *dev; > + void __iomem *mmio; > + > + struct reset_control *rstc; > + struct reset_control *arstc; > + struct reset_control *prstc; > + > + struct mipi_dsi_host host; > + struct drm_bridge bridge; > + struct drm_bridge *next_bridge; > + > + struct clk *vclk; > + > + enum mipi_dsi_pixel_format format; > + unsigned int num_data_lanes; > + unsigned int lanes; > + unsigned long mode_flags; > +}; > + > +static inline struct rzg2l_mipi_dsi * > +bridge_to_rzg2l_mipi_dsi(struct drm_bridge *bridge) > +{ > + return container_of(bridge, struct rzg2l_mipi_dsi, bridge); > +} > + > +static inline struct rzg2l_mipi_dsi * > +host_to_rzg2l_mipi_dsi(struct mipi_dsi_host *host) > +{ > + return container_of(host, struct rzg2l_mipi_dsi, host); > +} > + > +static void rzg2l_mipi_dsi_phy_write(void __iomem *mem, u32 reg, u32 data) You can pass a rzg2l_mipi_dsi pointer to this function instead of the memory pointer. Same for the two functions below. > +{ > + iowrite32(data, mem + reg); > +} > + > +static void rzg2l_mipi_dsi_link_write(void __iomem *mem, u32 reg, u32 data) > +{ > + iowrite32(data, mem + LINK_REG_OFFSET + reg); > +} > + > +static u32 rzg2l_mipi_dsi_link_read(void __iomem *mem, u32 reg) > +{ > + return ioread32(mem + LINK_REG_OFFSET + reg); > +} > + > +/* ----------------------------------------------------------------------------- > + * Hardware Setup > + */ > + > +static int rzg2l_mipi_dsi_startup(struct rzg2l_mipi_dsi *dsi, > + const struct drm_display_mode *mode) > +{ > + unsigned long hsfreq; > + u32 txsetr; > + u32 clstptsetr; > + u32 lptrnstsetr; > + u8 max_num_lanes; > + u32 clkkpt; > + u32 clkbfht; > + u32 clkstpt; > + u32 golpbkt; > + unsigned int bpp; > + struct { > + u32 tclk_miss; > + u32 t_init; > + u32 tclk_prepare; > + u32 tclk_settle; > + u32 tclk_trail; > + u32 tclk_post; > + u32 tclk_pre; > + u32 tclk_zero; > + u32 tlpx; > + u32 ths_prepare; > + u32 ths_settle; > + u32 ths_exit; > + u32 ths_trail; > + u32 ths_zero; > + } timings; > + u32 dphyctrl0; > + u32 dphytim0; > + u32 dphytim1; > + u32 dphytim2; > + u32 dphytim3; > + int ret; > + > + /* Relationship between hsclk and vclk must follow /* * Relationship between hsclk and vclk must follow > + * vclk * bpp = hsclk * 8 * lanes > + * where vclk: video clock (Hz) > + * bpp: video pixel bit depth > + * hsclk: DSI HS Byte clock frequency (Hz) > + * lanes: number of data lanes > + * > + * hsclk(bit) = hsclk(byte) * 8 > + */ > + > + bpp = mipi_dsi_pixel_format_to_bpp(dsi->format); > + hsfreq = (mode->clock * bpp * 8) / (8 * dsi->lanes); > + > + /* Initializing DPHY before accessing LINK */ > + > + /* All DSI global operation timings are set with recommended setting */ > + if (hsfreq > 250000) { > + timings.tclk_miss = 1; > + timings.t_init = 79801; > + timings.tclk_prepare = 8; > + timings.tclk_settle = 9; > + timings.tclk_trail = 7; > + timings.tclk_post = 35; > + timings.tclk_pre = 4; > + timings.tclk_zero = 33; > + timings.tlpx = 6; > + timings.ths_prepare = 9; > + timings.ths_settle = 9; > + timings.ths_exit = 13; > + timings.ths_trail = 9; > + timings.ths_zero = 16; > + } else { > + timings.tclk_miss = 1; > + timings.t_init = 79801; > + timings.tclk_prepare = 8; > + timings.tclk_settle = 9; > + timings.tclk_trail = 10; > + timings.tclk_post = 94; > + timings.tclk_pre = 13; > + timings.tclk_zero = 33; > + timings.tlpx = 6; > + timings.ths_prepare = 12; > + timings.ths_settle = 9; > + timings.ths_exit = 13; > + timings.ths_trail = 17; > + timings.ths_zero = 23; > + } > + > + ret = reset_control_deassert(dsi->arstc); > + if (ret < 0) > + return ret; > + > + ret = reset_control_deassert(dsi->prstc); > + if (ret < 0) > + return ret; > + > + ret = pm_runtime_resume_and_get(dsi->dev); > + if (ret < 0) { > + reset_control_assert(dsi->prstc); > + reset_control_assert(dsi->arstc); > + return ret; > + } > + > + clk_set_rate(dsi->vclk, mode->clock * 1000); > + > + dphyctrl0 = DSIDPHYCTRL0_CAL_EN_HSRX_OFS | DSIDPHYCTRL0_CMN_MASTER_EN | > + DSIDPHYCTRL0_RE_VDD_DETVCCQLV18 | DSIDPHYCTRL0_EN_BGR; > + > + rzg2l_mipi_dsi_phy_write(dsi->mmio, DSIDPHYCTRL0, dphyctrl0); > + usleep_range(20, 30); > + > + dphyctrl0 |= DSIDPHYCTRL0_EN_LDO1200; > + rzg2l_mipi_dsi_phy_write(dsi->mmio, DSIDPHYCTRL0, dphyctrl0); > + usleep_range(10, 20); > + > + dphytim0 = DSIDPHYTIM0_TCLK_MISS(timings.tclk_miss) | > + DSIDPHYTIM0_T_INIT(timings.t_init); > + dphytim1 = DSIDPHYTIM1_THS_PREPARE(timings.ths_prepare) | > + DSIDPHYTIM1_TCLK_PREPARE(timings.tclk_prepare) | > + DSIDPHYTIM1_THS_SETTLE(timings.ths_settle) | > + DSIDPHYTIM1_TCLK_SETTLE(timings.tclk_settle); > + dphytim2 = DSIDPHYTIM2_TCLK_TRAIL(timings.tclk_trail) | > + DSIDPHYTIM2_TCLK_POST(timings.tclk_post) | > + DSIDPHYTIM2_TCLK_PRE(timings.tclk_pre) | > + DSIDPHYTIM2_TCLK_ZERO(timings.tclk_zero); > + dphytim3 = DSIDPHYTIM3_TLPX(timings.tlpx) | > + DSIDPHYTIM3_THS_EXIT(timings.ths_exit) | > + DSIDPHYTIM3_THS_TRAIL(timings.ths_trail) | > + DSIDPHYTIM3_THS_ZERO(timings.ths_zero); > + > + rzg2l_mipi_dsi_phy_write(dsi->mmio, DSIDPHYTIM0, dphytim0); > + rzg2l_mipi_dsi_phy_write(dsi->mmio, DSIDPHYTIM1, dphytim1); > + rzg2l_mipi_dsi_phy_write(dsi->mmio, DSIDPHYTIM2, dphytim2); > + rzg2l_mipi_dsi_phy_write(dsi->mmio, DSIDPHYTIM3, dphytim3); > + > + reset_control_deassert(dsi->rstc); > + udelay(1); > + > + /* Check number of lanes capability */ > + max_num_lanes = rzg2l_mipi_dsi_link_read(dsi->mmio, TXSETR) >> 16; > + max_num_lanes = (max_num_lanes & 0x3) + 1; > + if (max_num_lanes < dsi->lanes) { > + dev_err(dsi->dev, "DPHY can not support %d lanes", dsi->lanes); > + return -EINVAL; > + } > + > + /* Enable Data lanes and Clock lanes */ > + txsetr = TXSETR_DLEN | TXSETR_NUMLANEUSE(dsi->lanes - 1) | TXSETR_CLEN; > + rzg2l_mipi_dsi_link_write(dsi->mmio, TXSETR, txsetr); > + > + /* > + * Global timings characteristic depends on high speed Clock Frequency > + * Currently MIPI DSI-IF just supports maximum FHD@60 with: > + * - videoclock = 148.5 (MHz) > + * - bpp: maximum 24bpp > + * - data lanes: maximum 4 lanes > + * Therefore maximum hsclk will be 891 Mbps. > + */ > + > + if (hsfreq > 445500) { > + clkkpt = 12; > + clkbfht = 15; > + clkstpt = 48; > + golpbkt = 75; > + } else if (hsfreq > 250000) { > + clkkpt = 7; > + clkbfht = 8; > + clkstpt = 27; > + golpbkt = 40; > + } else { > + clkkpt = 8; > + clkbfht = 6; > + clkstpt = 24; > + golpbkt = 29; > + } > + > + clstptsetr = CLSTPTSETR_CLKKPT(clkkpt) | CLSTPTSETR_CLKBFHT(clkbfht) | > + CLSTPTSETR_CLKSTPT(clkstpt); > + rzg2l_mipi_dsi_link_write(dsi->mmio, CLSTPTSETR, clstptsetr); > + > + lptrnstsetr = LPTRNSTSETR_GOLPBKT(golpbkt); > + rzg2l_mipi_dsi_link_write(dsi->mmio, LPTRNSTSETR, lptrnstsetr); > + > + return 0; > +} > + > +static void rzg2l_mipi_dsi_set_display_timing(struct rzg2l_mipi_dsi *dsi, > + const struct drm_display_mode *mode) > +{ > + u32 vich1ppsetr; > + u32 vich1vssetr; > + u32 vich1vpsetr; > + u32 vich1hssetr; > + u32 vich1hpsetr; > + int dsi_format; > + u32 delay[2]; > + u8 index; > + > + /* Configuration for Pixel Packet */ > + dsi_format = mipi_dsi_pixel_format_to_bpp(dsi->format); > + switch (dsi_format) { > + case 24: > + vich1ppsetr = VICH1PPSETR_DT_RGB24; > + break; > + case 18: > + vich1ppsetr = VICH1PPSETR_DT_RGB18; > + break; > + } > + > + if (dsi->mode_flags & MIPI_DSI_MODE_VIDEO_SYNC_PULSE) > + vich1ppsetr |= VICH1PPSETR_TXESYNC_PULSE; > + > + if (dsi->mode_flags & MIPI_DSI_MODE_VIDEO_BURST) > + vich1ppsetr &= ~VICH1PPSETR_TXESYNC_PULSE; > + > + rzg2l_mipi_dsi_link_write(dsi->mmio, VICH1PPSETR, vich1ppsetr); > + > + /* Configuration for Video Parameters */ > + vich1vssetr = VICH1VSSETR_VACTIVE(mode->vdisplay) | > + VICH1VSSETR_VSA(mode->vsync_end - mode->vsync_start); > + vich1vssetr |= (mode->flags & DRM_MODE_FLAG_PVSYNC) ? > + VICH1VSSETR_VSPOL_HIGH : VICH1VSSETR_VSPOL_LOW; > + > + vich1vpsetr = VICH1VPSETR_VFP(mode->vsync_start - mode->vdisplay) | > + VICH1VPSETR_VBP(mode->vtotal - mode->vsync_end); > + > + vich1hssetr = VICH1HSSETR_HACTIVE(mode->hdisplay) | > + VICH1HSSETR_HSA(mode->hsync_end - mode->hsync_start); > + vich1hssetr |= (mode->flags & DRM_MODE_FLAG_PHSYNC) ? > + VICH1HSSETR_HSPOL_HIGH : VICH1HSSETR_HSPOL_LOW; > + > + vich1hpsetr = VICH1HPSETR_HFP(mode->hsync_start - mode->hdisplay) | > + VICH1HPSETR_HBP(mode->htotal - mode->hsync_end); > + > + rzg2l_mipi_dsi_link_write(dsi->mmio, VICH1VSSETR, vich1vssetr); > + rzg2l_mipi_dsi_link_write(dsi->mmio, VICH1VPSETR, vich1vpsetr); > + rzg2l_mipi_dsi_link_write(dsi->mmio, VICH1HSSETR, vich1hssetr); > + rzg2l_mipi_dsi_link_write(dsi->mmio, VICH1HPSETR, vich1hpsetr); > + > + /* > + * Configuration for Delay Value > + * Delay value based on 2 ranges of video clock. > + * 74.25MHz is videoclock of HD@60p or FHD@30p > + */ > + > + if (mode->clock > 74250) { > + delay[0] = 231; > + delay[1] = 216; > + } else { > + delay[0] = 220; > + delay[1] = 212; > + } > + > + if (dsi->mode_flags & MIPI_DSI_CLOCK_NON_CONTINUOUS) > + index = 0; > + else > + index = 1; > + > + rzg2l_mipi_dsi_link_write(dsi->mmio, VICH1SET1R, > + VICH1SET1R_DLY(delay[index])); > +} > + > +static int rzg2l_mipi_dsi_start_hs_clock(struct rzg2l_mipi_dsi *dsi) > +{ > + bool hsclk_running_mode; > + u32 hsclksetr; > + u32 status; > + int ret; > + > + hsclk_running_mode = !(dsi->mode_flags & MIPI_DSI_CLOCK_NON_CONTINUOUS); > + > + /* Start HS clock */ > + hsclksetr = HSCLKSETR_HSCLKRUN_HS | (hsclk_running_mode ? > + HSCLKSETR_HSCLKMODE_CONT : > + HSCLKSETR_HSCLKMODE_NON_CONT); > + rzg2l_mipi_dsi_link_write(dsi->mmio, HSCLKSETR, hsclksetr); > + > + if (hsclk_running_mode) { > + ret = read_poll_timeout(rzg2l_mipi_dsi_link_read, status, > + status & PLSR_CLLP2HS, > + 2000, 20000, false, dsi->mmio, PLSR); > + if (ret < 0) { > + dev_err(dsi->dev, "failed to start HS clock\n"); > + return ret; > + } > + } > + > + dev_dbg(dsi->dev, "Start High Speed Clock with %s clock mode", > + hsclk_running_mode ? "continuous" : "non-continuous"); > + > + return 0; > +} > + > +static int rzg2l_mipi_dsi_stop_hs_clock(struct rzg2l_mipi_dsi *dsi) > +{ > + bool hsclk_mode; > + u32 status; > + int ret; > + > + hsclk_mode = !(dsi->mode_flags & MIPI_DSI_CLOCK_NON_CONTINUOUS); > + > + /* Stop HS clock */ > + rzg2l_mipi_dsi_link_write(dsi->mmio, HSCLKSETR, > + hsclk_mode ? HSCLKSETR_HSCLKMODE_CONT : > + HSCLKSETR_HSCLKMODE_NON_CONT); > + > + if (hsclk_mode) { > + ret = read_poll_timeout(rzg2l_mipi_dsi_link_read, status, > + status & PLSR_CLHS2LP, > + 2000, 20000, false, dsi->mmio, PLSR); > + if (ret < 0) { > + dev_err(dsi->dev, "failed to stop HS clock\n"); > + return ret; > + } > + } > + > + return 0; > +} > + > +static int rzg2l_mipi_dsi_start_video(struct rzg2l_mipi_dsi *dsi) > +{ > + u32 vich1set0r; > + u32 status; > + int ret; > + > + /* Configuration for Blanking sequence and start video input*/ > + vich1set0r = VICH1SET0R_HFPNOLP | VICH1SET0R_HBPNOLP | > + VICH1SET0R_HSANOLP | VICH1SET0R_VSTART; > + rzg2l_mipi_dsi_link_write(dsi->mmio, VICH1SET0R, vich1set0r); > + > + ret = read_poll_timeout(rzg2l_mipi_dsi_link_read, status, > + status & VICH1SR_VIRDY, > + 2000, 20000, false, dsi->mmio, VICH1SR); > + if (ret < 0) { > + dev_err(dsi->dev, "Failed to start video signal input\n"); > + return ret; > + } > + > + dev_dbg(dsi->dev, "Start video transferring"); I'm not sure this message is actually useful even for debugging. > + > + return 0; > +} > + > +static int rzg2l_mipi_dsi_stop_video(struct rzg2l_mipi_dsi *dsi) > +{ > + u32 status; > + int ret; > + > + rzg2l_mipi_dsi_link_write(dsi->mmio, VICH1SET0R, VICH1SET0R_VSTPAFT); > + ret = read_poll_timeout(rzg2l_mipi_dsi_link_read, status, > + (status & VICH1SR_STOP) && (!(status & VICH1SR_RUNNING)), > + 2000, 20000, false, dsi->mmio, VICH1SR); > + if (ret < 0) > + goto err; > + > + ret = read_poll_timeout(rzg2l_mipi_dsi_link_read, status, > + !(status & LINKSR_HSBUSY), > + 2000, 20000, false, dsi->mmio, LINKSR); > + if (ret < 0) > + goto err; > + > + return 0; > +err: > + dev_err(dsi->dev, "Failed to stop video signal input\n"); > + return ret; > +} > + > +/* ----------------------------------------------------------------------------- > + * Bridge > + */ > + > +static int rzg2l_mipi_dsi_attach(struct drm_bridge *bridge, > + enum drm_bridge_attach_flags flags) > +{ > + struct rzg2l_mipi_dsi *dsi = bridge_to_rzg2l_mipi_dsi(bridge); > + > + return drm_bridge_attach(bridge->encoder, dsi->next_bridge, bridge, > + flags); > +} > + > +static void rzg2l_mipi_dsi_atomic_enable(struct drm_bridge *bridge, > + struct drm_bridge_state *old_bridge_state) > +{ > + struct drm_atomic_state *state = old_bridge_state->base.state; > + struct rzg2l_mipi_dsi *dsi = bridge_to_rzg2l_mipi_dsi(bridge); > + const struct drm_display_mode *mode; > + struct drm_connector *connector; > + struct drm_crtc *crtc; > + int ret; > + > + connector = drm_atomic_get_new_connector_for_encoder(state, bridge->encoder); > + crtc = drm_atomic_get_new_connector_state(state, connector)->crtc; > + mode = &drm_atomic_get_new_crtc_state(state, crtc)->adjusted_mode; > + > + ret = rzg2l_mipi_dsi_startup(dsi, mode); > + if (ret < 0) > + return; > + > + rzg2l_mipi_dsi_set_display_timing(dsi, mode); > + > + ret = rzg2l_mipi_dsi_start_hs_clock(dsi); > + if (ret < 0) > + return; > + > + ret = rzg2l_mipi_dsi_start_video(dsi); > + if (ret < 0) > + return; I would have expected DSI peripherals to require the use of enable and pre_enable to split the clock and video enable, but if it works, that's fine. > +} > + > +static void rzg2l_mipi_dsi_atomic_disable(struct drm_bridge *bridge, > + struct drm_bridge_state *old_bridge_state) > +{ > + struct rzg2l_mipi_dsi *dsi = bridge_to_rzg2l_mipi_dsi(bridge); > + > + rzg2l_mipi_dsi_stop_video(dsi); > + rzg2l_mipi_dsi_stop_hs_clock(dsi); > + pm_runtime_put(dsi->dev); > + reset_control_assert(dsi->rstc); > + reset_control_assert(dsi->arstc); > + reset_control_assert(dsi->prstc); > +} > + > +static enum drm_mode_status > +rzg2l_mipi_dsi_bridge_mode_valid(struct drm_bridge *bridge, > + const struct drm_display_info *info, > + const struct drm_display_mode *mode) > +{ > + if (mode->clock > 148500) > + return MODE_CLOCK_HIGH; > + > + return MODE_OK; > +} > + > +static const struct drm_bridge_funcs rzg2l_mipi_dsi_bridge_ops = { > + .attach = rzg2l_mipi_dsi_attach, > + .atomic_duplicate_state = drm_atomic_helper_bridge_duplicate_state, > + .atomic_destroy_state = drm_atomic_helper_bridge_destroy_state, > + .atomic_reset = drm_atomic_helper_bridge_reset, > + .atomic_enable = rzg2l_mipi_dsi_atomic_enable, > + .atomic_disable = rzg2l_mipi_dsi_atomic_disable, > + .mode_valid = rzg2l_mipi_dsi_bridge_mode_valid, > +}; > + > +/* ----------------------------------------------------------------------------- > + * Host setting > + */ > + > +static int rzg2l_mipi_dsi_host_attach(struct mipi_dsi_host *host, > + struct mipi_dsi_device *device) > +{ > + struct rzg2l_mipi_dsi *dsi = host_to_rzg2l_mipi_dsi(host); > + int ret; > + > + if (device->lanes > dsi->num_data_lanes) > + return -EINVAL; > + > + switch (mipi_dsi_pixel_format_to_bpp(device->format)) { > + case 24: > + case 18: > + break; > + default: > + dev_warn(dsi->dev, "unsupported format"); > + return -EINVAL; > + } > + > + dsi->lanes = device->lanes; > + dsi->format = device->format; > + dsi->mode_flags = device->mode_flags; > + > + dsi->next_bridge = devm_drm_of_get_bridge(dsi->dev, dsi->dev->of_node, > + 1, 0); > + if (IS_ERR(dsi->next_bridge)) { > + ret = PTR_ERR(dsi->next_bridge); > + dev_err(dsi->dev, "failed to get next bridge: %d\n", ret); > + return ret; > + } > + > + /* Initialize the DRM bridge. */ > + dsi->bridge.funcs = &rzg2l_mipi_dsi_bridge_ops; > + dsi->bridge.of_node = dsi->dev->of_node; This can be done at probe time. > + drm_bridge_add(&dsi->bridge); > + > + return 0; > +} > + > +static int rzg2l_mipi_dsi_host_detach(struct mipi_dsi_host *host, > + struct mipi_dsi_device *device) > +{ > + struct rzg2l_mipi_dsi *dsi = host_to_rzg2l_mipi_dsi(host); > + > + drm_bridge_remove(&dsi->bridge); > + return 0; > +} > + > +static const struct mipi_dsi_host_ops rzg2l_mipi_dsi_host_ops = { > + .attach = rzg2l_mipi_dsi_host_attach, > + .detach = rzg2l_mipi_dsi_host_detach, > +}; > + > +/* ----------------------------------------------------------------------------- > + * Probe & Remove > + */ > + > +static int rzg2l_mipi_dsi_parse_dt(struct rzg2l_mipi_dsi *dsi) > +{ > + struct device_node *ep; > + u32 data_lanes[4]; > + int ret; > + > + ep = of_graph_get_endpoint_by_regs(dsi->dev->of_node, 1, 0); > + if (!ep) { > + dev_dbg(dsi->dev, "unconnected port@1\n"); Should this be an error message ? > + return -ENODEV; > + } > + > + ret = of_property_read_variable_u32_array(ep, "data-lanes", data_lanes, > + 1, 4); > + of_node_put(ep); > + > + if (ret < 0) { > + dev_err(dsi->dev, "missing or invalid data-lanes property\n"); > + return -ENODEV; > + } > + > + dsi->num_data_lanes = ret; > + return 0; > +} > + > +static int rzg2l_mipi_dsi_probe(struct platform_device *pdev) > +{ > + struct rzg2l_mipi_dsi *dsi; > + int ret; > + > + dsi = devm_kzalloc(&pdev->dev, sizeof(*dsi), GFP_KERNEL); > + if (!dsi) > + return -ENOMEM; > + > + platform_set_drvdata(pdev, dsi); > + dsi->dev = &pdev->dev; > + > + ret = rzg2l_mipi_dsi_parse_dt(dsi); > + if (ret < 0) > + return ret; > + > + dsi->mmio = devm_platform_ioremap_resource(pdev, 0); > + if (IS_ERR(dsi->mmio)) > + return PTR_ERR(dsi->mmio); > + > + dsi->vclk = devm_clk_get(dsi->dev, "vclk"); > + if (IS_ERR(dsi->vclk)) > + return PTR_ERR(dsi->vclk); > + > + dsi->rstc = devm_reset_control_get_exclusive(dsi->dev, "rst"); > + if (IS_ERR(dsi->rstc)) > + return dev_err_probe(dsi->dev, PTR_ERR(dsi->rstc), > + "failed to get arst\n"); > + > + dsi->arstc = devm_reset_control_get_exclusive(dsi->dev, "arst"); > + if (IS_ERR(dsi->arstc)) > + return dev_err_probe(&pdev->dev, PTR_ERR(dsi->arstc), > + "failed to get arst\n"); > + > + dsi->prstc = devm_reset_control_get_exclusive(dsi->dev, "prst"); > + if (IS_ERR(dsi->prstc)) > + return dev_err_probe(dsi->dev, PTR_ERR(dsi->prstc), > + "failed to get prst\n"); > + > + pm_runtime_enable(dsi->dev); > + > + /* Init host device */ > + dsi->host.dev = dsi->dev; > + dsi->host.ops = &rzg2l_mipi_dsi_host_ops; > + ret = mipi_dsi_host_register(&dsi->host); > + if (ret < 0) > + goto out_pm_get; > + > + return 0; Missing blank line. > +out_pm_get: > + pm_runtime_disable(dsi->dev); > + return ret; > +} > + > +static int rzg2l_mipi_dsi_remove(struct platform_device *pdev) > +{ > + struct rzg2l_mipi_dsi *dsi = platform_get_drvdata(pdev); > + > + mipi_dsi_host_unregister(&dsi->host); > + pm_runtime_disable(&pdev->dev); > + return 0; > +} > + > +static const struct of_device_id rzg2l_mipi_dsi_of_table[] = { > + { .compatible = "renesas,rzg2l-mipi-dsi" }, > + { /* sentinel */ } > +}; MODULE_DEVICE_TABLE(of, rzg2l_mipi_dsi_of_table); > + > +static struct platform_driver rzg2l_mipi_dsi_platform_driver = { > + .driver = { > + .name = "rzg2l-mipi-dsi", > + .of_match_table = rzg2l_mipi_dsi_of_table, > + }, > + .probe = rzg2l_mipi_dsi_probe, > + .remove = rzg2l_mipi_dsi_remove, > +}; > + > +module_platform_driver(rzg2l_mipi_dsi_platform_driver); > + > +MODULE_AUTHOR("Biju Das +MODULE_DESCRIPTION("Renesas RZ/G2L MIPI DSI Encoder Driver"); > +MODULE_LICENSE("GPL"); > diff --git a/drivers/gpu/drm/rcar-du/rzg2l_mipi_dsi_regs.h b/drivers/gpu/drm/rcar-du/rzg2l_mipi_dsi_regs.h > new file mode 100644 > index 000000000000..40c96330e79a > --- /dev/null > +++ b/drivers/gpu/drm/rcar-du/rzg2l_mipi_dsi_regs.h > @@ -0,0 +1,149 @@ > +/* SPDX-License-Identifier: GPL-2.0 */ > +/* > + * RZ/G2L MIPI DSI Interface Registers Definitions > + * > + * Copyright (C) 2022 Renesas Electronics Corporation > + */ > + > +#ifndef __RZG2L_MIPI_DSI_REGS_H__ > +#define __RZG2L_MIPI_DSI_REGS_H__ Please include linux/bits.h here to make this file self-contained. > + > +/* DPHY Registers */ > +#define DSIDPHYCTRL0 0x00 > +#define DSIDPHYCTRL0_CAL_EN_HSRX_OFS BIT(16) > +#define DSIDPHYCTRL0_CMN_MASTER_EN BIT(8) > +#define DSIDPHYCTRL0_RE_VDD_DETVCCQLV18 BIT(2) > +#define DSIDPHYCTRL0_EN_LDO1200 BIT(1) > +#define DSIDPHYCTRL0_EN_BGR BIT(0) > + > +#define DSIDPHYTIM0 0x04 > +#define DSIDPHYTIM0_TCLK_MISS(x) ((x) << 24) > +#define DSIDPHYTIM0_T_INIT(x) ((x) << 0) > + > +#define DSIDPHYTIM1 0x08 > +#define DSIDPHYTIM1_THS_PREPARE(x) ((x) << 24) > +#define DSIDPHYTIM1_TCLK_PREPARE(x) ((x) << 16) > +#define DSIDPHYTIM1_THS_SETTLE(x) ((x) << 8) > +#define DSIDPHYTIM1_TCLK_SETTLE(x) ((x) << 0) > + > +#define DSIDPHYTIM2 0x0c > +#define DSIDPHYTIM2_TCLK_TRAIL(x) ((x) << 24) > +#define DSIDPHYTIM2_TCLK_POST(x) ((x) << 16) > +#define DSIDPHYTIM2_TCLK_PRE(x) ((x) << 8) > +#define DSIDPHYTIM2_TCLK_ZERO(x) ((x) << 0) > + > +#define DSIDPHYTIM3 0x10 > +#define DSIDPHYTIM3_TLPX(x) ((x) << 24) > +#define DSIDPHYTIM3_THS_EXIT(x) ((x) << 16) > +#define DSIDPHYTIM3_THS_TRAIL(x) ((x) << 8) > +#define DSIDPHYTIM3_THS_ZERO(x) ((x) << 0) > + > +/* --------------------------------------------------------*/ > +/* Link Registers */ > +#define LINK_REG_OFFSET 0x10000 > + > +/* Link Status Register */ > +#define LINKSR 0x10 > +#define LINKSR_LPBUSY BIT(13) > +#define LINKSR_HSBUSY BIT(12) > +#define LINKSR_VICHRUN1 BIT(8) > +#define LINKSR_SQCHRUN1 BIT(4) > +#define LINKSR_SQCHRUN0 BIT(0) > + > +/* Tx Set Register */ > +#define TXSETR 0x100 > +#define TXSETR_NUMLANECAP (0x3 << 16) > +#define TXSETR_DLEN BIT(9) > +#define TXSETR_CLEN BIT(8) > +#define TXSETR_NUMLANEUSE(x) (((x) & 0x3) << 0) > + > +/* HS Clock Set Register */ > +#define HSCLKSETR 0x104 > +#define HSCLKSETR_HSCLKMODE_CONT BIT(1) > +#define HSCLKSETR_HSCLKMODE_NON_CONT (0 << 1) I would either drop the second macro, or write #define HSCLKSETR_HSCLKMODE_CONT (1 << 1) #define HSCLKSETR_HSCLKMODE_NON_CONT (0 << 1) if you don't want to handle it as a bit flag but a 1-bit field with a value. Same in multiple locations below. > +#define HSCLKSETR_HSCLKRUN_HS BIT(0) > +#define HSCLKSETR_HSCLKRUN_LP (0 << 0) > + > +/* Reset Control Register */ > +#define RSTCR 0x110 > +#define RSTCR_SWRST BIT(0) > +#define RSTCR_FCETXSTP BIT(16) > + > +/* Reset Status Register */ > +#define RSTSR 0x114 > +#define RSTSR_DL0DIR BIT(15) > +#define RSTSR_DLSTPST (0xf << 8) > +#define RSTSR_SWRSTV1 BIT(4) > +#define RSTSR_SWRSTIB BIT(3) > +#define RSTSR_SWRSTAPB BIT(2) > +#define RSTSR_SWRSTLP BIT(1) > +#define RSTSR_SWRSTHS BIT(0) > + > +/* Clock Lane Stop Time Set Register */ > +#define CLSTPTSETR 0x314 > +#define CLSTPTSETR_CLKKPT(x) ((x) << 24) > +#define CLSTPTSETR_CLKBFHT(x) ((x) << 16) > +#define CLSTPTSETR_CLKSTPT(x) ((x) << 2) > + > +/* LP Transition Time Set Register */ > +#define LPTRNSTSETR 0x318 > +#define LPTRNSTSETR_GOLPBKT(x) ((x) << 0) > + > +/* Physical Lane Status Register */ > +#define PLSR 0x320 > +#define PLSR_CLHS2LP BIT(27) > +#define PLSR_CLLP2HS BIT(26) > + > +/* Video-Input Channel 1 Set 0 Register */ > +#define VICH1SET0R 0x400 > +#define VICH1SET0R_VSEN BIT(12) > +#define VICH1SET0R_HFPNOLP BIT(10) > +#define VICH1SET0R_HBPNOLP BIT(9) > +#define VICH1SET0R_HSANOLP BIT(8) > +#define VICH1SET0R_VSTPAFT BIT(1) > +#define VICH1SET0R_VSTART BIT(0) > + > +/* Video-Input Channel 1 Set 1 Register */ > +#define VICH1SET1R 0x404 > +#define VICH1SET1R_DLY(x) (((x) & 0xfff) << 2) > + > +/* Video-Input Channel 1 Status Register */ > +#define VICH1SR 0x410 > +#define VICH1SR_VIRDY BIT(3) > +#define VICH1SR_RUNNING BIT(2) > +#define VICH1SR_STOP BIT(1) > +#define VICH1SR_START BIT(0) > + > +/* Video-Input Channel 1 Pixel Packet Set Register */ > +#define VICH1PPSETR 0x420 > +#define VICH1PPSETR_DT_RGB18 (0x1e << 16) > +#define VICH1PPSETR_DT_RGB18_LS (0x2e << 16) > +#define VICH1PPSETR_DT_RGB24 (0x3e << 16) > +#define VICH1PPSETR_TXESYNC_PULSE BIT(15) > +#define VICH1PPSETR_VC(x) ((x) << 22) > + > +/* Video-Input Channel 1 Vertical Size Set Register */ > +#define VICH1VSSETR 0x428 > +#define VICH1VSSETR_VACTIVE(x) (((x) & 0x7fff) << 16) > +#define VICH1VSSETR_VSPOL_LOW BIT(15) > +#define VICH1VSSETR_VSPOL_HIGH (0 << 15) > +#define VICH1VSSETR_VSA(x) (((x) & 0xfff) << 0) > + > +/* Video-Input Channel 1 Vertical Porch Set Register */ > +#define VICH1VPSETR 0x42C This is the only address written as an uppercase hex value. > +#define VICH1VPSETR_VFP(x) (((x) & 0x1fff) << 16) > +#define VICH1VPSETR_VBP(x) (((x) & 0x1fff) << 0) > + > +/* Video-Input Channel 1 Horizontal Size Set Register */ > +#define VICH1HSSETR 0x430 > +#define VICH1HSSETR_HACTIVE(x) (((x) & 0x7fff) << 16) > +#define VICH1HSSETR_HSPOL_LOW BIT(15) > +#define VICH1HSSETR_HSPOL_HIGH (0 << 15) > +#define VICH1HSSETR_HSA(x) (((x) & 0xfff) << 0) > + > +/* Video-Input Channel 1 Horizontal Porch Set Register */ > +#define VICH1HPSETR 0x434 > +#define VICH1HPSETR_HFP(x) (((x) & 0x1fff) << 16) > +#define VICH1HPSETR_HBP(x) (((x) & 0x1fff) << 0) > + > +#endif /* __RZG2L_MIPI_DSI_REGS_H__ */ -- Regards, Laurent Pinchart From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from gabe.freedesktop.org (gabe.freedesktop.org [131.252.210.177]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.lore.kernel.org (Postfix) with ESMTPS id 436C0C433EF for ; Fri, 15 Apr 2022 10:57:48 +0000 (UTC) Received: from gabe.freedesktop.org (localhost [127.0.0.1]) by gabe.freedesktop.org (Postfix) with ESMTP id B7C3410E2A4; Fri, 15 Apr 2022 10:57:46 +0000 (UTC) Received: from perceval.ideasonboard.com (perceval.ideasonboard.com [213.167.242.64]) by gabe.freedesktop.org (Postfix) with ESMTPS id 0803910E2A4 for ; Fri, 15 Apr 2022 10:57:44 +0000 (UTC) Received: from pendragon.ideasonboard.com (85-76-71-107-nat.elisa-mobile.fi [85.76.71.107]) by perceval.ideasonboard.com (Postfix) with ESMTPSA id 63923482; Fri, 15 Apr 2022 12:57:42 +0200 (CEST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/simple; d=ideasonboard.com; s=mail; t=1650020263; bh=5w1HV6LLTUEmMD3m/5q+u5jFf0NNyZggpuDRIj/j6LY=; h=Date:From:To:Cc:Subject:References:In-Reply-To:From; b=pHUHp01wtRuBfzo1XTA4yeY1rgaGUW/HgXF/AaJi/FRVUO6e/+sY3NpDXLiKmwGQU YfyP75bQ6x7OGFZ7JlYXp7NWF1mBPpLXpRf+EUuzORuvRgOqPI8HPuWlKpBrjyEAWY SoWrd2U81aoj0wOrZhGXJDS4ff6cak4aY4CorsKY= Date: Fri, 15 Apr 2022 13:57:39 +0300 From: Laurent Pinchart To: Biju Das Subject: Re: [PATCH v2 2/2] drm: rcar-du: Add RZ/G2L DSI driver Message-ID: References: <20220328065115.11724-1-biju.das.jz@bp.renesas.com> MIME-Version: 1.0 Content-Type: text/plain; charset=utf-8 Content-Disposition: inline In-Reply-To: <20220328065115.11724-1-biju.das.jz@bp.renesas.com> X-BeenThere: dri-devel@lists.freedesktop.org X-Mailman-Version: 2.1.29 Precedence: list List-Id: Direct Rendering Infrastructure - Development List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Cc: Chris Paterson , Geert Uytterhoeven , David Airlie , Prabhakar Mahadev Lad , dri-devel@lists.freedesktop.org, Biju Das , linux-renesas-soc@vger.kernel.org, Kieran Bingham Errors-To: dri-devel-bounces@lists.freedesktop.org Sender: "dri-devel" Hi Biju, Thank you for the patch. On Mon, Mar 28, 2022 at 07:51:15AM +0100, Biju Das wrote: > This driver supports the MIPI DSI encoder found in the RZ/G2L > SoC. It currently supports DSI mode only. > > Signed-off-by: Biju Das > --- > v1->v2: > * Rework based on dt-binding change (DSI + D-PHY) as single block > * Replaced link_mmio and phy_mmio with mmio in struct rzg2l_mipi_dsi > * Replaced rzg2l_mipi_phy_write with rzg2l_mipi_dsi_phy_write > and rzg2l_mipi_dsi_link_write > * Replaced rzg2l_mipi_phy_read->rzg2l_mipi_dsi_link_read > RFC->v1: > * Added "depends on ARCH_RENESAS || COMPILE_TEST" on KCONFIG > and dropped DRM as it is implied by DRM_BRIDGE > * Used devm_reset_control_get_exclusive() for reset handle > * Removed bool hsclkmode from struct rzg2l_mipi_dsi > * Added error check for pm, using pm_runtime_resume_and_get() instead of > pm_runtime_get_sync() > * Added check for unsupported formats in rzg2l_mipi_dsi_host_attach() > * Avoided read-modify-write stopping hsclock > * Used devm_platform_ioremap_resource for resource allocation > * Removed unnecessary assert call from probe and remove. > * wrap the line after the PTR_ERR() in probe() > * Updated reset failure messages in probe > * Fixed the typo arstc->prstc > * Made hex constants to lower case. > RFC: > * https://patchwork.kernel.org/project/linux-renesas-soc/patch/20220112174612.10773-23-biju.das.jz@bp.renesas.com/ > --- > drivers/gpu/drm/rcar-du/Kconfig | 8 + > drivers/gpu/drm/rcar-du/Makefile | 1 + > drivers/gpu/drm/rcar-du/rzg2l_mipi_dsi.c | 686 ++++++++++++++++++ > drivers/gpu/drm/rcar-du/rzg2l_mipi_dsi_regs.h | 149 ++++ > 4 files changed, 844 insertions(+) > create mode 100644 drivers/gpu/drm/rcar-du/rzg2l_mipi_dsi.c > create mode 100644 drivers/gpu/drm/rcar-du/rzg2l_mipi_dsi_regs.h > > diff --git a/drivers/gpu/drm/rcar-du/Kconfig b/drivers/gpu/drm/rcar-du/Kconfig > index e40fb0c53f9b..83d7d28214a0 100644 > --- a/drivers/gpu/drm/rcar-du/Kconfig > +++ b/drivers/gpu/drm/rcar-du/Kconfig > @@ -64,6 +64,14 @@ config DRM_RCAR_MIPI_DSI > help > Enable support for the R-Car Display Unit embedded MIPI DSI encoders. > > +config DRM_RZG2L_MIPI_DSI > + tristate "RZ/G2L MIPI DSI Encoder Support" > + depends on DRM_BRIDGE && OF > + depends on ARCH_RENESAS || COMPILE_TEST > + select DRM_MIPI_DSI > + help > + Enable support for the RZ/G2L Display Unit embedded MIPI DSI encoders. > + > config DRM_RCAR_VSP > bool "R-Car DU VSP Compositor Support" if ARM > default y if ARM64 > diff --git a/drivers/gpu/drm/rcar-du/Makefile b/drivers/gpu/drm/rcar-du/Makefile > index 01ba78e56b53..7fb4f8717fc4 100644 > --- a/drivers/gpu/drm/rcar-du/Makefile > +++ b/drivers/gpu/drm/rcar-du/Makefile > @@ -27,6 +27,7 @@ obj-$(CONFIG_DRM_RCAR_LVDS) += rcar_lvds.o > obj-$(CONFIG_DRM_RCAR_MIPI_DSI) += rcar_mipi_dsi.o > > obj-$(CONFIG_DRM_RZG2L_DU) += rzg2l-du-drm.o > +obj-$(CONFIG_DRM_RZG2L_MIPI_DSI) += rzg2l_mipi_dsi.o > > # 'remote-endpoint' is fixed up at run-time > DTC_FLAGS_rcar_du_of_lvds_r8a7790 += -Wno-graph_endpoint > diff --git a/drivers/gpu/drm/rcar-du/rzg2l_mipi_dsi.c b/drivers/gpu/drm/rcar-du/rzg2l_mipi_dsi.c > new file mode 100644 > index 000000000000..3b785041ba5e > --- /dev/null > +++ b/drivers/gpu/drm/rcar-du/rzg2l_mipi_dsi.c > @@ -0,0 +1,686 @@ > +// SPDX-License-Identifier: GPL-2.0 > +/* > + * RZ/G2L MIPI DSI Encoder Driver > + * > + * Copyright (C) 2022 Renesas Electronics Corporation > + */ > +#include > +#include > +#include > +#include > +#include > +#include > +#include > +#include > +#include > +#include > +#include > +#include > + > +#include > +#include > +#include > +#include > +#include > +#include > +#include > + > +#include "rzg2l_mipi_dsi_regs.h" > + > +struct rzg2l_mipi_dsi { > + struct device *dev; > + void __iomem *mmio; > + > + struct reset_control *rstc; > + struct reset_control *arstc; > + struct reset_control *prstc; > + > + struct mipi_dsi_host host; > + struct drm_bridge bridge; > + struct drm_bridge *next_bridge; > + > + struct clk *vclk; > + > + enum mipi_dsi_pixel_format format; > + unsigned int num_data_lanes; > + unsigned int lanes; > + unsigned long mode_flags; > +}; > + > +static inline struct rzg2l_mipi_dsi * > +bridge_to_rzg2l_mipi_dsi(struct drm_bridge *bridge) > +{ > + return container_of(bridge, struct rzg2l_mipi_dsi, bridge); > +} > + > +static inline struct rzg2l_mipi_dsi * > +host_to_rzg2l_mipi_dsi(struct mipi_dsi_host *host) > +{ > + return container_of(host, struct rzg2l_mipi_dsi, host); > +} > + > +static void rzg2l_mipi_dsi_phy_write(void __iomem *mem, u32 reg, u32 data) You can pass a rzg2l_mipi_dsi pointer to this function instead of the memory pointer. Same for the two functions below. > +{ > + iowrite32(data, mem + reg); > +} > + > +static void rzg2l_mipi_dsi_link_write(void __iomem *mem, u32 reg, u32 data) > +{ > + iowrite32(data, mem + LINK_REG_OFFSET + reg); > +} > + > +static u32 rzg2l_mipi_dsi_link_read(void __iomem *mem, u32 reg) > +{ > + return ioread32(mem + LINK_REG_OFFSET + reg); > +} > + > +/* ----------------------------------------------------------------------------- > + * Hardware Setup > + */ > + > +static int rzg2l_mipi_dsi_startup(struct rzg2l_mipi_dsi *dsi, > + const struct drm_display_mode *mode) > +{ > + unsigned long hsfreq; > + u32 txsetr; > + u32 clstptsetr; > + u32 lptrnstsetr; > + u8 max_num_lanes; > + u32 clkkpt; > + u32 clkbfht; > + u32 clkstpt; > + u32 golpbkt; > + unsigned int bpp; > + struct { > + u32 tclk_miss; > + u32 t_init; > + u32 tclk_prepare; > + u32 tclk_settle; > + u32 tclk_trail; > + u32 tclk_post; > + u32 tclk_pre; > + u32 tclk_zero; > + u32 tlpx; > + u32 ths_prepare; > + u32 ths_settle; > + u32 ths_exit; > + u32 ths_trail; > + u32 ths_zero; > + } timings; > + u32 dphyctrl0; > + u32 dphytim0; > + u32 dphytim1; > + u32 dphytim2; > + u32 dphytim3; > + int ret; > + > + /* Relationship between hsclk and vclk must follow /* * Relationship between hsclk and vclk must follow > + * vclk * bpp = hsclk * 8 * lanes > + * where vclk: video clock (Hz) > + * bpp: video pixel bit depth > + * hsclk: DSI HS Byte clock frequency (Hz) > + * lanes: number of data lanes > + * > + * hsclk(bit) = hsclk(byte) * 8 > + */ > + > + bpp = mipi_dsi_pixel_format_to_bpp(dsi->format); > + hsfreq = (mode->clock * bpp * 8) / (8 * dsi->lanes); > + > + /* Initializing DPHY before accessing LINK */ > + > + /* All DSI global operation timings are set with recommended setting */ > + if (hsfreq > 250000) { > + timings.tclk_miss = 1; > + timings.t_init = 79801; > + timings.tclk_prepare = 8; > + timings.tclk_settle = 9; > + timings.tclk_trail = 7; > + timings.tclk_post = 35; > + timings.tclk_pre = 4; > + timings.tclk_zero = 33; > + timings.tlpx = 6; > + timings.ths_prepare = 9; > + timings.ths_settle = 9; > + timings.ths_exit = 13; > + timings.ths_trail = 9; > + timings.ths_zero = 16; > + } else { > + timings.tclk_miss = 1; > + timings.t_init = 79801; > + timings.tclk_prepare = 8; > + timings.tclk_settle = 9; > + timings.tclk_trail = 10; > + timings.tclk_post = 94; > + timings.tclk_pre = 13; > + timings.tclk_zero = 33; > + timings.tlpx = 6; > + timings.ths_prepare = 12; > + timings.ths_settle = 9; > + timings.ths_exit = 13; > + timings.ths_trail = 17; > + timings.ths_zero = 23; > + } > + > + ret = reset_control_deassert(dsi->arstc); > + if (ret < 0) > + return ret; > + > + ret = reset_control_deassert(dsi->prstc); > + if (ret < 0) > + return ret; > + > + ret = pm_runtime_resume_and_get(dsi->dev); > + if (ret < 0) { > + reset_control_assert(dsi->prstc); > + reset_control_assert(dsi->arstc); > + return ret; > + } > + > + clk_set_rate(dsi->vclk, mode->clock * 1000); > + > + dphyctrl0 = DSIDPHYCTRL0_CAL_EN_HSRX_OFS | DSIDPHYCTRL0_CMN_MASTER_EN | > + DSIDPHYCTRL0_RE_VDD_DETVCCQLV18 | DSIDPHYCTRL0_EN_BGR; > + > + rzg2l_mipi_dsi_phy_write(dsi->mmio, DSIDPHYCTRL0, dphyctrl0); > + usleep_range(20, 30); > + > + dphyctrl0 |= DSIDPHYCTRL0_EN_LDO1200; > + rzg2l_mipi_dsi_phy_write(dsi->mmio, DSIDPHYCTRL0, dphyctrl0); > + usleep_range(10, 20); > + > + dphytim0 = DSIDPHYTIM0_TCLK_MISS(timings.tclk_miss) | > + DSIDPHYTIM0_T_INIT(timings.t_init); > + dphytim1 = DSIDPHYTIM1_THS_PREPARE(timings.ths_prepare) | > + DSIDPHYTIM1_TCLK_PREPARE(timings.tclk_prepare) | > + DSIDPHYTIM1_THS_SETTLE(timings.ths_settle) | > + DSIDPHYTIM1_TCLK_SETTLE(timings.tclk_settle); > + dphytim2 = DSIDPHYTIM2_TCLK_TRAIL(timings.tclk_trail) | > + DSIDPHYTIM2_TCLK_POST(timings.tclk_post) | > + DSIDPHYTIM2_TCLK_PRE(timings.tclk_pre) | > + DSIDPHYTIM2_TCLK_ZERO(timings.tclk_zero); > + dphytim3 = DSIDPHYTIM3_TLPX(timings.tlpx) | > + DSIDPHYTIM3_THS_EXIT(timings.ths_exit) | > + DSIDPHYTIM3_THS_TRAIL(timings.ths_trail) | > + DSIDPHYTIM3_THS_ZERO(timings.ths_zero); > + > + rzg2l_mipi_dsi_phy_write(dsi->mmio, DSIDPHYTIM0, dphytim0); > + rzg2l_mipi_dsi_phy_write(dsi->mmio, DSIDPHYTIM1, dphytim1); > + rzg2l_mipi_dsi_phy_write(dsi->mmio, DSIDPHYTIM2, dphytim2); > + rzg2l_mipi_dsi_phy_write(dsi->mmio, DSIDPHYTIM3, dphytim3); > + > + reset_control_deassert(dsi->rstc); > + udelay(1); > + > + /* Check number of lanes capability */ > + max_num_lanes = rzg2l_mipi_dsi_link_read(dsi->mmio, TXSETR) >> 16; > + max_num_lanes = (max_num_lanes & 0x3) + 1; > + if (max_num_lanes < dsi->lanes) { > + dev_err(dsi->dev, "DPHY can not support %d lanes", dsi->lanes); > + return -EINVAL; > + } > + > + /* Enable Data lanes and Clock lanes */ > + txsetr = TXSETR_DLEN | TXSETR_NUMLANEUSE(dsi->lanes - 1) | TXSETR_CLEN; > + rzg2l_mipi_dsi_link_write(dsi->mmio, TXSETR, txsetr); > + > + /* > + * Global timings characteristic depends on high speed Clock Frequency > + * Currently MIPI DSI-IF just supports maximum FHD@60 with: > + * - videoclock = 148.5 (MHz) > + * - bpp: maximum 24bpp > + * - data lanes: maximum 4 lanes > + * Therefore maximum hsclk will be 891 Mbps. > + */ > + > + if (hsfreq > 445500) { > + clkkpt = 12; > + clkbfht = 15; > + clkstpt = 48; > + golpbkt = 75; > + } else if (hsfreq > 250000) { > + clkkpt = 7; > + clkbfht = 8; > + clkstpt = 27; > + golpbkt = 40; > + } else { > + clkkpt = 8; > + clkbfht = 6; > + clkstpt = 24; > + golpbkt = 29; > + } > + > + clstptsetr = CLSTPTSETR_CLKKPT(clkkpt) | CLSTPTSETR_CLKBFHT(clkbfht) | > + CLSTPTSETR_CLKSTPT(clkstpt); > + rzg2l_mipi_dsi_link_write(dsi->mmio, CLSTPTSETR, clstptsetr); > + > + lptrnstsetr = LPTRNSTSETR_GOLPBKT(golpbkt); > + rzg2l_mipi_dsi_link_write(dsi->mmio, LPTRNSTSETR, lptrnstsetr); > + > + return 0; > +} > + > +static void rzg2l_mipi_dsi_set_display_timing(struct rzg2l_mipi_dsi *dsi, > + const struct drm_display_mode *mode) > +{ > + u32 vich1ppsetr; > + u32 vich1vssetr; > + u32 vich1vpsetr; > + u32 vich1hssetr; > + u32 vich1hpsetr; > + int dsi_format; > + u32 delay[2]; > + u8 index; > + > + /* Configuration for Pixel Packet */ > + dsi_format = mipi_dsi_pixel_format_to_bpp(dsi->format); > + switch (dsi_format) { > + case 24: > + vich1ppsetr = VICH1PPSETR_DT_RGB24; > + break; > + case 18: > + vich1ppsetr = VICH1PPSETR_DT_RGB18; > + break; > + } > + > + if (dsi->mode_flags & MIPI_DSI_MODE_VIDEO_SYNC_PULSE) > + vich1ppsetr |= VICH1PPSETR_TXESYNC_PULSE; > + > + if (dsi->mode_flags & MIPI_DSI_MODE_VIDEO_BURST) > + vich1ppsetr &= ~VICH1PPSETR_TXESYNC_PULSE; > + > + rzg2l_mipi_dsi_link_write(dsi->mmio, VICH1PPSETR, vich1ppsetr); > + > + /* Configuration for Video Parameters */ > + vich1vssetr = VICH1VSSETR_VACTIVE(mode->vdisplay) | > + VICH1VSSETR_VSA(mode->vsync_end - mode->vsync_start); > + vich1vssetr |= (mode->flags & DRM_MODE_FLAG_PVSYNC) ? > + VICH1VSSETR_VSPOL_HIGH : VICH1VSSETR_VSPOL_LOW; > + > + vich1vpsetr = VICH1VPSETR_VFP(mode->vsync_start - mode->vdisplay) | > + VICH1VPSETR_VBP(mode->vtotal - mode->vsync_end); > + > + vich1hssetr = VICH1HSSETR_HACTIVE(mode->hdisplay) | > + VICH1HSSETR_HSA(mode->hsync_end - mode->hsync_start); > + vich1hssetr |= (mode->flags & DRM_MODE_FLAG_PHSYNC) ? > + VICH1HSSETR_HSPOL_HIGH : VICH1HSSETR_HSPOL_LOW; > + > + vich1hpsetr = VICH1HPSETR_HFP(mode->hsync_start - mode->hdisplay) | > + VICH1HPSETR_HBP(mode->htotal - mode->hsync_end); > + > + rzg2l_mipi_dsi_link_write(dsi->mmio, VICH1VSSETR, vich1vssetr); > + rzg2l_mipi_dsi_link_write(dsi->mmio, VICH1VPSETR, vich1vpsetr); > + rzg2l_mipi_dsi_link_write(dsi->mmio, VICH1HSSETR, vich1hssetr); > + rzg2l_mipi_dsi_link_write(dsi->mmio, VICH1HPSETR, vich1hpsetr); > + > + /* > + * Configuration for Delay Value > + * Delay value based on 2 ranges of video clock. > + * 74.25MHz is videoclock of HD@60p or FHD@30p > + */ > + > + if (mode->clock > 74250) { > + delay[0] = 231; > + delay[1] = 216; > + } else { > + delay[0] = 220; > + delay[1] = 212; > + } > + > + if (dsi->mode_flags & MIPI_DSI_CLOCK_NON_CONTINUOUS) > + index = 0; > + else > + index = 1; > + > + rzg2l_mipi_dsi_link_write(dsi->mmio, VICH1SET1R, > + VICH1SET1R_DLY(delay[index])); > +} > + > +static int rzg2l_mipi_dsi_start_hs_clock(struct rzg2l_mipi_dsi *dsi) > +{ > + bool hsclk_running_mode; > + u32 hsclksetr; > + u32 status; > + int ret; > + > + hsclk_running_mode = !(dsi->mode_flags & MIPI_DSI_CLOCK_NON_CONTINUOUS); > + > + /* Start HS clock */ > + hsclksetr = HSCLKSETR_HSCLKRUN_HS | (hsclk_running_mode ? > + HSCLKSETR_HSCLKMODE_CONT : > + HSCLKSETR_HSCLKMODE_NON_CONT); > + rzg2l_mipi_dsi_link_write(dsi->mmio, HSCLKSETR, hsclksetr); > + > + if (hsclk_running_mode) { > + ret = read_poll_timeout(rzg2l_mipi_dsi_link_read, status, > + status & PLSR_CLLP2HS, > + 2000, 20000, false, dsi->mmio, PLSR); > + if (ret < 0) { > + dev_err(dsi->dev, "failed to start HS clock\n"); > + return ret; > + } > + } > + > + dev_dbg(dsi->dev, "Start High Speed Clock with %s clock mode", > + hsclk_running_mode ? "continuous" : "non-continuous"); > + > + return 0; > +} > + > +static int rzg2l_mipi_dsi_stop_hs_clock(struct rzg2l_mipi_dsi *dsi) > +{ > + bool hsclk_mode; > + u32 status; > + int ret; > + > + hsclk_mode = !(dsi->mode_flags & MIPI_DSI_CLOCK_NON_CONTINUOUS); > + > + /* Stop HS clock */ > + rzg2l_mipi_dsi_link_write(dsi->mmio, HSCLKSETR, > + hsclk_mode ? HSCLKSETR_HSCLKMODE_CONT : > + HSCLKSETR_HSCLKMODE_NON_CONT); > + > + if (hsclk_mode) { > + ret = read_poll_timeout(rzg2l_mipi_dsi_link_read, status, > + status & PLSR_CLHS2LP, > + 2000, 20000, false, dsi->mmio, PLSR); > + if (ret < 0) { > + dev_err(dsi->dev, "failed to stop HS clock\n"); > + return ret; > + } > + } > + > + return 0; > +} > + > +static int rzg2l_mipi_dsi_start_video(struct rzg2l_mipi_dsi *dsi) > +{ > + u32 vich1set0r; > + u32 status; > + int ret; > + > + /* Configuration for Blanking sequence and start video input*/ > + vich1set0r = VICH1SET0R_HFPNOLP | VICH1SET0R_HBPNOLP | > + VICH1SET0R_HSANOLP | VICH1SET0R_VSTART; > + rzg2l_mipi_dsi_link_write(dsi->mmio, VICH1SET0R, vich1set0r); > + > + ret = read_poll_timeout(rzg2l_mipi_dsi_link_read, status, > + status & VICH1SR_VIRDY, > + 2000, 20000, false, dsi->mmio, VICH1SR); > + if (ret < 0) { > + dev_err(dsi->dev, "Failed to start video signal input\n"); > + return ret; > + } > + > + dev_dbg(dsi->dev, "Start video transferring"); I'm not sure this message is actually useful even for debugging. > + > + return 0; > +} > + > +static int rzg2l_mipi_dsi_stop_video(struct rzg2l_mipi_dsi *dsi) > +{ > + u32 status; > + int ret; > + > + rzg2l_mipi_dsi_link_write(dsi->mmio, VICH1SET0R, VICH1SET0R_VSTPAFT); > + ret = read_poll_timeout(rzg2l_mipi_dsi_link_read, status, > + (status & VICH1SR_STOP) && (!(status & VICH1SR_RUNNING)), > + 2000, 20000, false, dsi->mmio, VICH1SR); > + if (ret < 0) > + goto err; > + > + ret = read_poll_timeout(rzg2l_mipi_dsi_link_read, status, > + !(status & LINKSR_HSBUSY), > + 2000, 20000, false, dsi->mmio, LINKSR); > + if (ret < 0) > + goto err; > + > + return 0; > +err: > + dev_err(dsi->dev, "Failed to stop video signal input\n"); > + return ret; > +} > + > +/* ----------------------------------------------------------------------------- > + * Bridge > + */ > + > +static int rzg2l_mipi_dsi_attach(struct drm_bridge *bridge, > + enum drm_bridge_attach_flags flags) > +{ > + struct rzg2l_mipi_dsi *dsi = bridge_to_rzg2l_mipi_dsi(bridge); > + > + return drm_bridge_attach(bridge->encoder, dsi->next_bridge, bridge, > + flags); > +} > + > +static void rzg2l_mipi_dsi_atomic_enable(struct drm_bridge *bridge, > + struct drm_bridge_state *old_bridge_state) > +{ > + struct drm_atomic_state *state = old_bridge_state->base.state; > + struct rzg2l_mipi_dsi *dsi = bridge_to_rzg2l_mipi_dsi(bridge); > + const struct drm_display_mode *mode; > + struct drm_connector *connector; > + struct drm_crtc *crtc; > + int ret; > + > + connector = drm_atomic_get_new_connector_for_encoder(state, bridge->encoder); > + crtc = drm_atomic_get_new_connector_state(state, connector)->crtc; > + mode = &drm_atomic_get_new_crtc_state(state, crtc)->adjusted_mode; > + > + ret = rzg2l_mipi_dsi_startup(dsi, mode); > + if (ret < 0) > + return; > + > + rzg2l_mipi_dsi_set_display_timing(dsi, mode); > + > + ret = rzg2l_mipi_dsi_start_hs_clock(dsi); > + if (ret < 0) > + return; > + > + ret = rzg2l_mipi_dsi_start_video(dsi); > + if (ret < 0) > + return; I would have expected DSI peripherals to require the use of enable and pre_enable to split the clock and video enable, but if it works, that's fine. > +} > + > +static void rzg2l_mipi_dsi_atomic_disable(struct drm_bridge *bridge, > + struct drm_bridge_state *old_bridge_state) > +{ > + struct rzg2l_mipi_dsi *dsi = bridge_to_rzg2l_mipi_dsi(bridge); > + > + rzg2l_mipi_dsi_stop_video(dsi); > + rzg2l_mipi_dsi_stop_hs_clock(dsi); > + pm_runtime_put(dsi->dev); > + reset_control_assert(dsi->rstc); > + reset_control_assert(dsi->arstc); > + reset_control_assert(dsi->prstc); > +} > + > +static enum drm_mode_status > +rzg2l_mipi_dsi_bridge_mode_valid(struct drm_bridge *bridge, > + const struct drm_display_info *info, > + const struct drm_display_mode *mode) > +{ > + if (mode->clock > 148500) > + return MODE_CLOCK_HIGH; > + > + return MODE_OK; > +} > + > +static const struct drm_bridge_funcs rzg2l_mipi_dsi_bridge_ops = { > + .attach = rzg2l_mipi_dsi_attach, > + .atomic_duplicate_state = drm_atomic_helper_bridge_duplicate_state, > + .atomic_destroy_state = drm_atomic_helper_bridge_destroy_state, > + .atomic_reset = drm_atomic_helper_bridge_reset, > + .atomic_enable = rzg2l_mipi_dsi_atomic_enable, > + .atomic_disable = rzg2l_mipi_dsi_atomic_disable, > + .mode_valid = rzg2l_mipi_dsi_bridge_mode_valid, > +}; > + > +/* ----------------------------------------------------------------------------- > + * Host setting > + */ > + > +static int rzg2l_mipi_dsi_host_attach(struct mipi_dsi_host *host, > + struct mipi_dsi_device *device) > +{ > + struct rzg2l_mipi_dsi *dsi = host_to_rzg2l_mipi_dsi(host); > + int ret; > + > + if (device->lanes > dsi->num_data_lanes) > + return -EINVAL; > + > + switch (mipi_dsi_pixel_format_to_bpp(device->format)) { > + case 24: > + case 18: > + break; > + default: > + dev_warn(dsi->dev, "unsupported format"); > + return -EINVAL; > + } > + > + dsi->lanes = device->lanes; > + dsi->format = device->format; > + dsi->mode_flags = device->mode_flags; > + > + dsi->next_bridge = devm_drm_of_get_bridge(dsi->dev, dsi->dev->of_node, > + 1, 0); > + if (IS_ERR(dsi->next_bridge)) { > + ret = PTR_ERR(dsi->next_bridge); > + dev_err(dsi->dev, "failed to get next bridge: %d\n", ret); > + return ret; > + } > + > + /* Initialize the DRM bridge. */ > + dsi->bridge.funcs = &rzg2l_mipi_dsi_bridge_ops; > + dsi->bridge.of_node = dsi->dev->of_node; This can be done at probe time. > + drm_bridge_add(&dsi->bridge); > + > + return 0; > +} > + > +static int rzg2l_mipi_dsi_host_detach(struct mipi_dsi_host *host, > + struct mipi_dsi_device *device) > +{ > + struct rzg2l_mipi_dsi *dsi = host_to_rzg2l_mipi_dsi(host); > + > + drm_bridge_remove(&dsi->bridge); > + return 0; > +} > + > +static const struct mipi_dsi_host_ops rzg2l_mipi_dsi_host_ops = { > + .attach = rzg2l_mipi_dsi_host_attach, > + .detach = rzg2l_mipi_dsi_host_detach, > +}; > + > +/* ----------------------------------------------------------------------------- > + * Probe & Remove > + */ > + > +static int rzg2l_mipi_dsi_parse_dt(struct rzg2l_mipi_dsi *dsi) > +{ > + struct device_node *ep; > + u32 data_lanes[4]; > + int ret; > + > + ep = of_graph_get_endpoint_by_regs(dsi->dev->of_node, 1, 0); > + if (!ep) { > + dev_dbg(dsi->dev, "unconnected port@1\n"); Should this be an error message ? > + return -ENODEV; > + } > + > + ret = of_property_read_variable_u32_array(ep, "data-lanes", data_lanes, > + 1, 4); > + of_node_put(ep); > + > + if (ret < 0) { > + dev_err(dsi->dev, "missing or invalid data-lanes property\n"); > + return -ENODEV; > + } > + > + dsi->num_data_lanes = ret; > + return 0; > +} > + > +static int rzg2l_mipi_dsi_probe(struct platform_device *pdev) > +{ > + struct rzg2l_mipi_dsi *dsi; > + int ret; > + > + dsi = devm_kzalloc(&pdev->dev, sizeof(*dsi), GFP_KERNEL); > + if (!dsi) > + return -ENOMEM; > + > + platform_set_drvdata(pdev, dsi); > + dsi->dev = &pdev->dev; > + > + ret = rzg2l_mipi_dsi_parse_dt(dsi); > + if (ret < 0) > + return ret; > + > + dsi->mmio = devm_platform_ioremap_resource(pdev, 0); > + if (IS_ERR(dsi->mmio)) > + return PTR_ERR(dsi->mmio); > + > + dsi->vclk = devm_clk_get(dsi->dev, "vclk"); > + if (IS_ERR(dsi->vclk)) > + return PTR_ERR(dsi->vclk); > + > + dsi->rstc = devm_reset_control_get_exclusive(dsi->dev, "rst"); > + if (IS_ERR(dsi->rstc)) > + return dev_err_probe(dsi->dev, PTR_ERR(dsi->rstc), > + "failed to get arst\n"); > + > + dsi->arstc = devm_reset_control_get_exclusive(dsi->dev, "arst"); > + if (IS_ERR(dsi->arstc)) > + return dev_err_probe(&pdev->dev, PTR_ERR(dsi->arstc), > + "failed to get arst\n"); > + > + dsi->prstc = devm_reset_control_get_exclusive(dsi->dev, "prst"); > + if (IS_ERR(dsi->prstc)) > + return dev_err_probe(dsi->dev, PTR_ERR(dsi->prstc), > + "failed to get prst\n"); > + > + pm_runtime_enable(dsi->dev); > + > + /* Init host device */ > + dsi->host.dev = dsi->dev; > + dsi->host.ops = &rzg2l_mipi_dsi_host_ops; > + ret = mipi_dsi_host_register(&dsi->host); > + if (ret < 0) > + goto out_pm_get; > + > + return 0; Missing blank line. > +out_pm_get: > + pm_runtime_disable(dsi->dev); > + return ret; > +} > + > +static int rzg2l_mipi_dsi_remove(struct platform_device *pdev) > +{ > + struct rzg2l_mipi_dsi *dsi = platform_get_drvdata(pdev); > + > + mipi_dsi_host_unregister(&dsi->host); > + pm_runtime_disable(&pdev->dev); > + return 0; > +} > + > +static const struct of_device_id rzg2l_mipi_dsi_of_table[] = { > + { .compatible = "renesas,rzg2l-mipi-dsi" }, > + { /* sentinel */ } > +}; MODULE_DEVICE_TABLE(of, rzg2l_mipi_dsi_of_table); > + > +static struct platform_driver rzg2l_mipi_dsi_platform_driver = { > + .driver = { > + .name = "rzg2l-mipi-dsi", > + .of_match_table = rzg2l_mipi_dsi_of_table, > + }, > + .probe = rzg2l_mipi_dsi_probe, > + .remove = rzg2l_mipi_dsi_remove, > +}; > + > +module_platform_driver(rzg2l_mipi_dsi_platform_driver); > + > +MODULE_AUTHOR("Biju Das +MODULE_DESCRIPTION("Renesas RZ/G2L MIPI DSI Encoder Driver"); > +MODULE_LICENSE("GPL"); > diff --git a/drivers/gpu/drm/rcar-du/rzg2l_mipi_dsi_regs.h b/drivers/gpu/drm/rcar-du/rzg2l_mipi_dsi_regs.h > new file mode 100644 > index 000000000000..40c96330e79a > --- /dev/null > +++ b/drivers/gpu/drm/rcar-du/rzg2l_mipi_dsi_regs.h > @@ -0,0 +1,149 @@ > +/* SPDX-License-Identifier: GPL-2.0 */ > +/* > + * RZ/G2L MIPI DSI Interface Registers Definitions > + * > + * Copyright (C) 2022 Renesas Electronics Corporation > + */ > + > +#ifndef __RZG2L_MIPI_DSI_REGS_H__ > +#define __RZG2L_MIPI_DSI_REGS_H__ Please include linux/bits.h here to make this file self-contained. > + > +/* DPHY Registers */ > +#define DSIDPHYCTRL0 0x00 > +#define DSIDPHYCTRL0_CAL_EN_HSRX_OFS BIT(16) > +#define DSIDPHYCTRL0_CMN_MASTER_EN BIT(8) > +#define DSIDPHYCTRL0_RE_VDD_DETVCCQLV18 BIT(2) > +#define DSIDPHYCTRL0_EN_LDO1200 BIT(1) > +#define DSIDPHYCTRL0_EN_BGR BIT(0) > + > +#define DSIDPHYTIM0 0x04 > +#define DSIDPHYTIM0_TCLK_MISS(x) ((x) << 24) > +#define DSIDPHYTIM0_T_INIT(x) ((x) << 0) > + > +#define DSIDPHYTIM1 0x08 > +#define DSIDPHYTIM1_THS_PREPARE(x) ((x) << 24) > +#define DSIDPHYTIM1_TCLK_PREPARE(x) ((x) << 16) > +#define DSIDPHYTIM1_THS_SETTLE(x) ((x) << 8) > +#define DSIDPHYTIM1_TCLK_SETTLE(x) ((x) << 0) > + > +#define DSIDPHYTIM2 0x0c > +#define DSIDPHYTIM2_TCLK_TRAIL(x) ((x) << 24) > +#define DSIDPHYTIM2_TCLK_POST(x) ((x) << 16) > +#define DSIDPHYTIM2_TCLK_PRE(x) ((x) << 8) > +#define DSIDPHYTIM2_TCLK_ZERO(x) ((x) << 0) > + > +#define DSIDPHYTIM3 0x10 > +#define DSIDPHYTIM3_TLPX(x) ((x) << 24) > +#define DSIDPHYTIM3_THS_EXIT(x) ((x) << 16) > +#define DSIDPHYTIM3_THS_TRAIL(x) ((x) << 8) > +#define DSIDPHYTIM3_THS_ZERO(x) ((x) << 0) > + > +/* --------------------------------------------------------*/ > +/* Link Registers */ > +#define LINK_REG_OFFSET 0x10000 > + > +/* Link Status Register */ > +#define LINKSR 0x10 > +#define LINKSR_LPBUSY BIT(13) > +#define LINKSR_HSBUSY BIT(12) > +#define LINKSR_VICHRUN1 BIT(8) > +#define LINKSR_SQCHRUN1 BIT(4) > +#define LINKSR_SQCHRUN0 BIT(0) > + > +/* Tx Set Register */ > +#define TXSETR 0x100 > +#define TXSETR_NUMLANECAP (0x3 << 16) > +#define TXSETR_DLEN BIT(9) > +#define TXSETR_CLEN BIT(8) > +#define TXSETR_NUMLANEUSE(x) (((x) & 0x3) << 0) > + > +/* HS Clock Set Register */ > +#define HSCLKSETR 0x104 > +#define HSCLKSETR_HSCLKMODE_CONT BIT(1) > +#define HSCLKSETR_HSCLKMODE_NON_CONT (0 << 1) I would either drop the second macro, or write #define HSCLKSETR_HSCLKMODE_CONT (1 << 1) #define HSCLKSETR_HSCLKMODE_NON_CONT (0 << 1) if you don't want to handle it as a bit flag but a 1-bit field with a value. Same in multiple locations below. > +#define HSCLKSETR_HSCLKRUN_HS BIT(0) > +#define HSCLKSETR_HSCLKRUN_LP (0 << 0) > + > +/* Reset Control Register */ > +#define RSTCR 0x110 > +#define RSTCR_SWRST BIT(0) > +#define RSTCR_FCETXSTP BIT(16) > + > +/* Reset Status Register */ > +#define RSTSR 0x114 > +#define RSTSR_DL0DIR BIT(15) > +#define RSTSR_DLSTPST (0xf << 8) > +#define RSTSR_SWRSTV1 BIT(4) > +#define RSTSR_SWRSTIB BIT(3) > +#define RSTSR_SWRSTAPB BIT(2) > +#define RSTSR_SWRSTLP BIT(1) > +#define RSTSR_SWRSTHS BIT(0) > + > +/* Clock Lane Stop Time Set Register */ > +#define CLSTPTSETR 0x314 > +#define CLSTPTSETR_CLKKPT(x) ((x) << 24) > +#define CLSTPTSETR_CLKBFHT(x) ((x) << 16) > +#define CLSTPTSETR_CLKSTPT(x) ((x) << 2) > + > +/* LP Transition Time Set Register */ > +#define LPTRNSTSETR 0x318 > +#define LPTRNSTSETR_GOLPBKT(x) ((x) << 0) > + > +/* Physical Lane Status Register */ > +#define PLSR 0x320 > +#define PLSR_CLHS2LP BIT(27) > +#define PLSR_CLLP2HS BIT(26) > + > +/* Video-Input Channel 1 Set 0 Register */ > +#define VICH1SET0R 0x400 > +#define VICH1SET0R_VSEN BIT(12) > +#define VICH1SET0R_HFPNOLP BIT(10) > +#define VICH1SET0R_HBPNOLP BIT(9) > +#define VICH1SET0R_HSANOLP BIT(8) > +#define VICH1SET0R_VSTPAFT BIT(1) > +#define VICH1SET0R_VSTART BIT(0) > + > +/* Video-Input Channel 1 Set 1 Register */ > +#define VICH1SET1R 0x404 > +#define VICH1SET1R_DLY(x) (((x) & 0xfff) << 2) > + > +/* Video-Input Channel 1 Status Register */ > +#define VICH1SR 0x410 > +#define VICH1SR_VIRDY BIT(3) > +#define VICH1SR_RUNNING BIT(2) > +#define VICH1SR_STOP BIT(1) > +#define VICH1SR_START BIT(0) > + > +/* Video-Input Channel 1 Pixel Packet Set Register */ > +#define VICH1PPSETR 0x420 > +#define VICH1PPSETR_DT_RGB18 (0x1e << 16) > +#define VICH1PPSETR_DT_RGB18_LS (0x2e << 16) > +#define VICH1PPSETR_DT_RGB24 (0x3e << 16) > +#define VICH1PPSETR_TXESYNC_PULSE BIT(15) > +#define VICH1PPSETR_VC(x) ((x) << 22) > + > +/* Video-Input Channel 1 Vertical Size Set Register */ > +#define VICH1VSSETR 0x428 > +#define VICH1VSSETR_VACTIVE(x) (((x) & 0x7fff) << 16) > +#define VICH1VSSETR_VSPOL_LOW BIT(15) > +#define VICH1VSSETR_VSPOL_HIGH (0 << 15) > +#define VICH1VSSETR_VSA(x) (((x) & 0xfff) << 0) > + > +/* Video-Input Channel 1 Vertical Porch Set Register */ > +#define VICH1VPSETR 0x42C This is the only address written as an uppercase hex value. > +#define VICH1VPSETR_VFP(x) (((x) & 0x1fff) << 16) > +#define VICH1VPSETR_VBP(x) (((x) & 0x1fff) << 0) > + > +/* Video-Input Channel 1 Horizontal Size Set Register */ > +#define VICH1HSSETR 0x430 > +#define VICH1HSSETR_HACTIVE(x) (((x) & 0x7fff) << 16) > +#define VICH1HSSETR_HSPOL_LOW BIT(15) > +#define VICH1HSSETR_HSPOL_HIGH (0 << 15) > +#define VICH1HSSETR_HSA(x) (((x) & 0xfff) << 0) > + > +/* Video-Input Channel 1 Horizontal Porch Set Register */ > +#define VICH1HPSETR 0x434 > +#define VICH1HPSETR_HFP(x) (((x) & 0x1fff) << 16) > +#define VICH1HPSETR_HBP(x) (((x) & 0x1fff) << 0) > + > +#endif /* __RZG2L_MIPI_DSI_REGS_H__ */ -- Regards, Laurent Pinchart