[PATCH v3] dt-bindings: spmi: convert QCOM PMIC SPMI bindings to yaml

[PATCH v3] dt-bindings: spmi: convert QCOM PMIC SPMI bindings to yaml

[David Heidelberg]

Convert Qualcomm PMIC SPMI binding to yaml format.

Signed-off-by: David Heidelberg <david@ixit.cz>

---
v2:
 - add #address and #size-cells
 - add reg and remove spmi include from example
v3:
 - fix doc reference error (make refcheckdocs)

Signed-off-by: David Heidelberg <david@ixit.cz>
---
 .../bindings/mfd/qcom,spmi-pmic.txt           |   2 +-
 .../bindings/spmi/qcom,spmi-pmic-arb.txt      |  65 ----------
 .../bindings/spmi/qcom,spmi-pmic-arb.yaml     | 120 ++++++++++++++++++
 3 files changed, 121 insertions(+), 66 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/spmi/qcom,spmi-pmic-arb.txt
 create mode 100644 Documentation/devicetree/bindings/spmi/qcom,spmi-pmic-arb.yaml

diff --git a/Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.txt b/Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.txt
index 7a27c500ff63..3810a80536f7 100644
--- a/Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.txt
+++ b/Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.txt
@@ -58,7 +58,7 @@ Required properties for peripheral child nodes:
 Optional properties for peripheral child nodes:
 - interrupts:      Interrupts are specified as a 4-tuple. For more information
                    see:
-                   Documentation/devicetree/bindings/spmi/qcom,spmi-pmic-arb.txt
+                   Documentation/devicetree/bindings/spmi/qcom,spmi-pmic-arb.yaml
 - interrupt-names: Corresponding interrupt name to the interrupts property
 
 Each child node of SPMI slave id represents a function of the PMIC. In the
diff --git a/Documentation/devicetree/bindings/spmi/qcom,spmi-pmic-arb.txt b/Documentation/devicetree/bindings/spmi/qcom,spmi-pmic-arb.txt
deleted file mode 100644
index ca645e21fe47..000000000000
--- a/Documentation/devicetree/bindings/spmi/qcom,spmi-pmic-arb.txt
+++ /dev/null
@@ -1,65 +0,0 @@
-Qualcomm SPMI Controller (PMIC Arbiter)
-
-The SPMI PMIC Arbiter is found on Snapdragon chipsets.  It is an SPMI
-controller with wrapping arbitration logic to allow for multiple on-chip
-devices to control a single SPMI master.
-
-The PMIC Arbiter can also act as an interrupt controller, providing interrupts
-to slave devices.
-
-See Documentation/devicetree/bindings/spmi/spmi.yaml for the generic SPMI
-controller binding requirements for child nodes.
-
-See Documentation/devicetree/bindings/interrupt-controller/interrupts.txt for
-generic interrupt controller binding documentation.
-
-Required properties:
-- compatible : should be "qcom,spmi-pmic-arb".
-- reg-names  : must contain:
-     "core" - core registers
-     "intr" - interrupt controller registers
-     "cnfg" - configuration registers
-   Registers used only for V2 PMIC Arbiter:
-     "chnls"  - tx-channel per virtual slave registers.
-     "obsrvr" - rx-channel (called observer) per virtual slave registers.
-
-- reg : address + size pairs describing the PMIC arb register sets; order must
-        correspond with the order of entries in reg-names
-- #address-cells : must be set to 2
-- #size-cells : must be set to 0
-- qcom,ee : indicates the active Execution Environment identifier (0-5)
-- qcom,channel : which of the PMIC Arb provided channels to use for accesses (0-5)
-- interrupts : interrupt list for the PMIC Arb controller, must contain a
-               single interrupt entry for the peripheral interrupt
-- interrupt-names : corresponding interrupt names for the interrupts
-                    listed in the 'interrupts' property, must contain:
-     "periph_irq" - summary interrupt for PMIC peripherals
-- interrupt-controller : boolean indicator that the PMIC arbiter is an interrupt controller
-- #interrupt-cells :  must be set to 4. Interrupts are specified as a 4-tuple:
-    cell 1: slave ID for the requested interrupt (0-15)
-    cell 2: peripheral ID for requested interrupt (0-255)
-    cell 3: the requested peripheral interrupt (0-7)
-    cell 4: interrupt flags indicating level-sense information, as defined in
-            dt-bindings/interrupt-controller/irq.h
-
-Example:
-
-	spmi {
-		compatible = "qcom,spmi-pmic-arb";
-		reg-names = "core", "intr", "cnfg";
-		reg = <0xfc4cf000 0x1000>,
-		      <0xfc4cb000 0x1000>,
-		      <0xfc4ca000 0x1000>;
-
-		interrupt-names = "periph_irq";
-		interrupts = <0 190 0>;
-
-		qcom,ee = <0>;
-		qcom,channel = <0>;
-
-		#address-cells = <2>;
-		#size-cells = <0>;
-
-		interrupt-controller;
-		#interrupt-cells = <4>;
-	};
diff --git a/Documentation/devicetree/bindings/spmi/qcom,spmi-pmic-arb.yaml b/Documentation/devicetree/bindings/spmi/qcom,spmi-pmic-arb.yaml
new file mode 100644
index 000000000000..55d379c85fd9
--- /dev/null
+++ b/Documentation/devicetree/bindings/spmi/qcom,spmi-pmic-arb.yaml
@@ -0,0 +1,120 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/spmi/qcom,spmi-pmic-arb.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SPMI Controller (PMIC Arbiter)
+
+maintainers:
+  - Stephen Boyd <sboyd@kernel.org>
+
+description: |
+  The SPMI PMIC Arbiter is found on Snapdragon chipsets. It is an SPMI
+  controller with wrapping arbitration logic to allow for multiple on-chip
+  devices to control a single SPMI master.
+
+  The PMIC Arbiter can also act as an interrupt controller, providing interrupts
+  to slave devices.
+
+allOf:
+  - $ref: spmi.yaml
+
+properties:
+  compatible:
+    const: qcom,spmi-pmic-arb
+
+  reg:
+    oneOf:
+      - items: # V1
+          - description: core registers
+          - description: interrupt controller registers
+          - description: configuration registers
+      - items: # V2
+          - description: core registers
+          - description: tx-channel per virtual slave regosters
+          - description: rx-channel (called observer) per virtual slave registers
+          - description: interrupt controller registers
+          - description: configuration registers
+
+  reg-names:
+    oneOf:
+      - items:
+          - const: core
+          - const: intr
+          - const: cnfg
+      - items:
+          - const: core
+          - const: chnls
+          - const: obsrvr
+          - const: intr
+          - const: cnfg
+
+  interrupts:
+    maxItems: 1
+
+  interrupt-names:
+    const: periph_irq
+
+  interrupt-controller: true
+
+  '#address-cells': true
+
+  '#interrupt-cells':
+    const: 4
+    description: |
+      cell 1: slave ID for the requested interrupt (0-15)
+      cell 2: peripheral ID for requested interrupt (0-255)
+      cell 3: the requested peripheral interrupt (0-7)
+      cell 4: interrupt flags indicating level-sense information,
+              as defined in dt-bindings/interrupt-controller/irq.h
+
+  '#size-cells': true
+
+  qcom,ee:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 5
+    description: >
+      indicates the active Execution Environment identifier
+
+  qcom,channel:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 5
+    description: >
+      which of the PMIC Arb provided channels to use for accesses
+
+required:
+  - compatible
+  - reg-names
+  - interrupts
+  - interrupt-names
+  - '#interrupt-cells'
+  - qcom,ee
+  - qcom,channel
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    spmi@fc4cf000 {
+        compatible = "qcom,spmi-pmic-arb";
+        reg-names = "core", "intr", "cnfg";
+        reg = <0xfc4cf000 0x1000>,
+              <0xfc4cb000 0x1000>,
+              <0xfc4ca000 0x1000>;
+
+        interrupt-names = "periph_irq";
+        interrupts = <0 190 0>;
+
+        qcom,ee = <0>;
+        qcom,channel = <0>;
+
+        #address-cells = <2>;
+        #size-cells = <0>;
+
+        interrupt-controller;
+        #interrupt-cells = <4>;
+    };
+
-- 
2.34.1

Re: [PATCH v3] dt-bindings: spmi: convert QCOM PMIC SPMI bindings to yaml

[Lee Jones]

On Mon, 27 Dec 2021, David Heidelberg wrote:

> Convert Qualcomm PMIC SPMI binding to yaml format.
> 
> Signed-off-by: David Heidelberg <david@ixit.cz>
> 
> ---
> v2:
>  - add #address and #size-cells
>  - add reg and remove spmi include from example
> v3:
>  - fix doc reference error (make refcheckdocs)
> 
> Signed-off-by: David Heidelberg <david@ixit.cz>
> ---
>  .../bindings/mfd/qcom,spmi-pmic.txt           |   2 +-

Acked-by: Lee Jones <lee.jones@linaro.org>

>  .../bindings/spmi/qcom,spmi-pmic-arb.txt      |  65 ----------
>  .../bindings/spmi/qcom,spmi-pmic-arb.yaml     | 120 ++++++++++++++++++
>  3 files changed, 121 insertions(+), 66 deletions(-)
>  delete mode 100644 Documentation/devicetree/bindings/spmi/qcom,spmi-pmic-arb.txt
>  create mode 100644 Documentation/devicetree/bindings/spmi/qcom,spmi-pmic-arb.yaml

-- 
Lee Jones [李琼斯]
Senior Technical Lead - Developer Services
Linaro.org │ Open source software for Arm SoCs
Follow Linaro: Facebook | Twitter | Blog

Re: [PATCH v3] dt-bindings: spmi: convert QCOM PMIC SPMI bindings to yaml

[Rob Herring]

On Mon, 27 Dec 2021 18:01:50 +0100, David Heidelberg wrote:
> Convert Qualcomm PMIC SPMI binding to yaml format.
> 
> Signed-off-by: David Heidelberg <david@ixit.cz>
> 
> ---
> v2:
>  - add #address and #size-cells
>  - add reg and remove spmi include from example
> v3:
>  - fix doc reference error (make refcheckdocs)
> 
> Signed-off-by: David Heidelberg <david@ixit.cz>
> ---
>  .../bindings/mfd/qcom,spmi-pmic.txt           |   2 +-
>  .../bindings/spmi/qcom,spmi-pmic-arb.txt      |  65 ----------
>  .../bindings/spmi/qcom,spmi-pmic-arb.yaml     | 120 ++++++++++++++++++
>  3 files changed, 121 insertions(+), 66 deletions(-)
>  delete mode 100644 Documentation/devicetree/bindings/spmi/qcom,spmi-pmic-arb.txt
>  create mode 100644 Documentation/devicetree/bindings/spmi/qcom,spmi-pmic-arb.yaml
> 

Reviewed-by: Rob Herring <robh@kernel.org>

Re: [PATCH v3] dt-bindings: spmi: convert QCOM PMIC SPMI bindings to yaml

[Vinod Koul]

On 27-12-21, 18:01, David Heidelberg wrote:
> Convert Qualcomm PMIC SPMI binding to yaml format.

Reviewed-by: Vinod Koul <vkoul@kernel.org>

Steve, Can this be picked up please. I will rebase my v7 update based on
this...

> 
> Signed-off-by: David Heidelberg <david@ixit.cz>
> 
> ---
> v2:
>  - add #address and #size-cells
>  - add reg and remove spmi include from example
> v3:
>  - fix doc reference error (make refcheckdocs)
> 
> Signed-off-by: David Heidelberg <david@ixit.cz>
> ---
>  .../bindings/mfd/qcom,spmi-pmic.txt           |   2 +-
>  .../bindings/spmi/qcom,spmi-pmic-arb.txt      |  65 ----------
>  .../bindings/spmi/qcom,spmi-pmic-arb.yaml     | 120 ++++++++++++++++++
>  3 files changed, 121 insertions(+), 66 deletions(-)
>  delete mode 100644 Documentation/devicetree/bindings/spmi/qcom,spmi-pmic-arb.txt
>  create mode 100644 Documentation/devicetree/bindings/spmi/qcom,spmi-pmic-arb.yaml
> 
> diff --git a/Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.txt b/Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.txt
> index 7a27c500ff63..3810a80536f7 100644
> --- a/Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.txt
> +++ b/Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.txt
> @@ -58,7 +58,7 @@ Required properties for peripheral child nodes:
>  Optional properties for peripheral child nodes:
>  - interrupts:      Interrupts are specified as a 4-tuple. For more information
>                     see:
> -                   Documentation/devicetree/bindings/spmi/qcom,spmi-pmic-arb.txt
> +                   Documentation/devicetree/bindings/spmi/qcom,spmi-pmic-arb.yaml
>  - interrupt-names: Corresponding interrupt name to the interrupts property
>  
>  Each child node of SPMI slave id represents a function of the PMIC. In the
> diff --git a/Documentation/devicetree/bindings/spmi/qcom,spmi-pmic-arb.txt b/Documentation/devicetree/bindings/spmi/qcom,spmi-pmic-arb.txt
> deleted file mode 100644
> index ca645e21fe47..000000000000
> --- a/Documentation/devicetree/bindings/spmi/qcom,spmi-pmic-arb.txt
> +++ /dev/null
> @@ -1,65 +0,0 @@
> -Qualcomm SPMI Controller (PMIC Arbiter)
> -
> -The SPMI PMIC Arbiter is found on Snapdragon chipsets.  It is an SPMI
> -controller with wrapping arbitration logic to allow for multiple on-chip
> -devices to control a single SPMI master.
> -
> -The PMIC Arbiter can also act as an interrupt controller, providing interrupts
> -to slave devices.
> -
> -See Documentation/devicetree/bindings/spmi/spmi.yaml for the generic SPMI
> -controller binding requirements for child nodes.
> -
> -See Documentation/devicetree/bindings/interrupt-controller/interrupts.txt for
> -generic interrupt controller binding documentation.
> -
> -Required properties:
> -- compatible : should be "qcom,spmi-pmic-arb".
> -- reg-names  : must contain:
> -     "core" - core registers
> -     "intr" - interrupt controller registers
> -     "cnfg" - configuration registers
> -   Registers used only for V2 PMIC Arbiter:
> -     "chnls"  - tx-channel per virtual slave registers.
> -     "obsrvr" - rx-channel (called observer) per virtual slave registers.
> -
> -- reg : address + size pairs describing the PMIC arb register sets; order must
> -        correspond with the order of entries in reg-names
> -- #address-cells : must be set to 2
> -- #size-cells : must be set to 0
> -- qcom,ee : indicates the active Execution Environment identifier (0-5)
> -- qcom,channel : which of the PMIC Arb provided channels to use for accesses (0-5)
> -- interrupts : interrupt list for the PMIC Arb controller, must contain a
> -               single interrupt entry for the peripheral interrupt
> -- interrupt-names : corresponding interrupt names for the interrupts
> -                    listed in the 'interrupts' property, must contain:
> -     "periph_irq" - summary interrupt for PMIC peripherals
> -- interrupt-controller : boolean indicator that the PMIC arbiter is an interrupt controller
> -- #interrupt-cells :  must be set to 4. Interrupts are specified as a 4-tuple:
> -    cell 1: slave ID for the requested interrupt (0-15)
> -    cell 2: peripheral ID for requested interrupt (0-255)
> -    cell 3: the requested peripheral interrupt (0-7)
> -    cell 4: interrupt flags indicating level-sense information, as defined in
> -            dt-bindings/interrupt-controller/irq.h
> -
> -Example:
> -
> -	spmi {
> -		compatible = "qcom,spmi-pmic-arb";
> -		reg-names = "core", "intr", "cnfg";
> -		reg = <0xfc4cf000 0x1000>,
> -		      <0xfc4cb000 0x1000>,
> -		      <0xfc4ca000 0x1000>;
> -
> -		interrupt-names = "periph_irq";
> -		interrupts = <0 190 0>;
> -
> -		qcom,ee = <0>;
> -		qcom,channel = <0>;
> -
> -		#address-cells = <2>;
> -		#size-cells = <0>;
> -
> -		interrupt-controller;
> -		#interrupt-cells = <4>;
> -	};
> diff --git a/Documentation/devicetree/bindings/spmi/qcom,spmi-pmic-arb.yaml b/Documentation/devicetree/bindings/spmi/qcom,spmi-pmic-arb.yaml
> new file mode 100644
> index 000000000000..55d379c85fd9
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/spmi/qcom,spmi-pmic-arb.yaml
> @@ -0,0 +1,120 @@
> +# SPDX-License-Identifier: GPL-2.0-only
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/spmi/qcom,spmi-pmic-arb.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Qualcomm SPMI Controller (PMIC Arbiter)
> +
> +maintainers:
> +  - Stephen Boyd <sboyd@kernel.org>
> +
> +description: |
> +  The SPMI PMIC Arbiter is found on Snapdragon chipsets. It is an SPMI
> +  controller with wrapping arbitration logic to allow for multiple on-chip
> +  devices to control a single SPMI master.
> +
> +  The PMIC Arbiter can also act as an interrupt controller, providing interrupts
> +  to slave devices.
> +
> +allOf:
> +  - $ref: spmi.yaml
> +
> +properties:
> +  compatible:
> +    const: qcom,spmi-pmic-arb
> +
> +  reg:
> +    oneOf:
> +      - items: # V1
> +          - description: core registers
> +          - description: interrupt controller registers
> +          - description: configuration registers
> +      - items: # V2
> +          - description: core registers
> +          - description: tx-channel per virtual slave regosters
> +          - description: rx-channel (called observer) per virtual slave registers
> +          - description: interrupt controller registers
> +          - description: configuration registers
> +
> +  reg-names:
> +    oneOf:
> +      - items:
> +          - const: core
> +          - const: intr
> +          - const: cnfg
> +      - items:
> +          - const: core
> +          - const: chnls
> +          - const: obsrvr
> +          - const: intr
> +          - const: cnfg
> +
> +  interrupts:
> +    maxItems: 1
> +
> +  interrupt-names:
> +    const: periph_irq
> +
> +  interrupt-controller: true
> +
> +  '#address-cells': true
> +
> +  '#interrupt-cells':
> +    const: 4
> +    description: |
> +      cell 1: slave ID for the requested interrupt (0-15)
> +      cell 2: peripheral ID for requested interrupt (0-255)
> +      cell 3: the requested peripheral interrupt (0-7)
> +      cell 4: interrupt flags indicating level-sense information,
> +              as defined in dt-bindings/interrupt-controller/irq.h
> +
> +  '#size-cells': true
> +
> +  qcom,ee:
> +    $ref: /schemas/types.yaml#/definitions/uint32
> +    minimum: 0
> +    maximum: 5
> +    description: >
> +      indicates the active Execution Environment identifier
> +
> +  qcom,channel:
> +    $ref: /schemas/types.yaml#/definitions/uint32
> +    minimum: 0
> +    maximum: 5
> +    description: >
> +      which of the PMIC Arb provided channels to use for accesses
> +
> +required:
> +  - compatible
> +  - reg-names
> +  - interrupts
> +  - interrupt-names
> +  - '#interrupt-cells'
> +  - qcom,ee
> +  - qcom,channel
> +
> +unevaluatedProperties: false
> +
> +examples:
> +  - |
> +    spmi@fc4cf000 {
> +        compatible = "qcom,spmi-pmic-arb";
> +        reg-names = "core", "intr", "cnfg";
> +        reg = <0xfc4cf000 0x1000>,
> +              <0xfc4cb000 0x1000>,
> +              <0xfc4ca000 0x1000>;
> +
> +        interrupt-names = "periph_irq";
> +        interrupts = <0 190 0>;
> +
> +        qcom,ee = <0>;
> +        qcom,channel = <0>;
> +
> +        #address-cells = <2>;
> +        #size-cells = <0>;
> +
> +        interrupt-controller;
> +        #interrupt-cells = <4>;
> +    };
> +
> -- 
> 2.34.1

-- 
~Vinod

Re: [PATCH v3] dt-bindings: spmi: convert QCOM PMIC SPMI bindings to yaml

[Subbaraman Narayanamurthy]

>> Convert Qualcomm PMIC SPMI binding to yaml format.

> Reviewed-by: Vinod Koul <vkoul@kernel.org>

> Steve, Can this be picked up please. I will rebase my v7 update based on
> this...

Can this DT bindings conversion patch be picked up please?

Re: [PATCH v3] dt-bindings: spmi: convert QCOM PMIC SPMI bindings to yaml

[Vinod Koul]

On 19-04-22, 15:42, Subbaraman Narayanamurthy wrote:
> >> Convert Qualcomm PMIC SPMI binding to yaml format.
> 
> > Reviewed-by: Vinod Koul <vkoul@kernel.org>
> 
> > Steve, Can this be picked up please. I will rebase my v7 update based on
> > this...
> 
> Can this DT bindings conversion patch be picked up please?
Yes please

This and spmi v7 support patches have been on list for quite long...

Thanks
-- 
~Vinod

Re: [PATCH v3] dt-bindings: spmi: convert QCOM PMIC SPMI bindings to yaml

[Rob Herring]

On Mon, 27 Dec 2021 18:01:50 +0100, David Heidelberg wrote:
> Convert Qualcomm PMIC SPMI binding to yaml format.
> 
> Signed-off-by: David Heidelberg <david@ixit.cz>
> 
> ---
> v2:
>  - add #address and #size-cells
>  - add reg and remove spmi include from example
> v3:
>  - fix doc reference error (make refcheckdocs)
> 
> Signed-off-by: David Heidelberg <david@ixit.cz>
> ---
>  .../bindings/mfd/qcom,spmi-pmic.txt           |   2 +-
>  .../bindings/spmi/qcom,spmi-pmic-arb.txt      |  65 ----------
>  .../bindings/spmi/qcom,spmi-pmic-arb.yaml     | 120 ++++++++++++++++++
>  3 files changed, 121 insertions(+), 66 deletions(-)
>  delete mode 100644 Documentation/devicetree/bindings/spmi/qcom,spmi-pmic-arb.txt
>  create mode 100644 Documentation/devicetree/bindings/spmi/qcom,spmi-pmic-arb.yaml
> 

Looks like this one got missed.

Applied, thanks!

Re: [PATCH v3] dt-bindings: spmi: convert QCOM PMIC SPMI bindings to yaml

[Lee Jones]

On Mon, 27 Dec 2021, David Heidelberg wrote:

> Convert Qualcomm PMIC SPMI binding to yaml format.
> 
> Signed-off-by: David Heidelberg <david@ixit.cz>
> 
> ---
> v2:
>  - add #address and #size-cells
>  - add reg and remove spmi include from example
> v3:
>  - fix doc reference error (make refcheckdocs)
> 
> Signed-off-by: David Heidelberg <david@ixit.cz>
> ---
>  .../bindings/mfd/qcom,spmi-pmic.txt           |   2 +-
>  .../bindings/spmi/qcom,spmi-pmic-arb.txt      |  65 ----------
>  .../bindings/spmi/qcom,spmi-pmic-arb.yaml     | 120 ++++++++++++++++++
>  3 files changed, 121 insertions(+), 66 deletions(-)
>  delete mode 100644 Documentation/devicetree/bindings/spmi/qcom,spmi-pmic-arb.txt
>  create mode 100644 Documentation/devicetree/bindings/spmi/qcom,spmi-pmic-arb.yaml

Applied, thanks.

-- 
Lee Jones [李琼斯]
Principal Technical Lead - Developer Services
Linaro.org │ Open source software for Arm SoCs
Follow Linaro: Facebook | Twitter | Blog

Re: [PATCH v3] dt-bindings: spmi: convert QCOM PMIC SPMI bindings to yaml

[Lee Jones]

On Mon, 09 May 2022, Lee Jones wrote:

> On Mon, 27 Dec 2021, David Heidelberg wrote:
> 
> > Convert Qualcomm PMIC SPMI binding to yaml format.
> > 
> > Signed-off-by: David Heidelberg <david@ixit.cz>
> > 
> > ---
> > v2:
> >  - add #address and #size-cells
> >  - add reg and remove spmi include from example
> > v3:
> >  - fix doc reference error (make refcheckdocs)
> > 
> > Signed-off-by: David Heidelberg <david@ixit.cz>
> > ---
> >  .../bindings/mfd/qcom,spmi-pmic.txt           |   2 +-
> >  .../bindings/spmi/qcom,spmi-pmic-arb.txt      |  65 ----------
> >  .../bindings/spmi/qcom,spmi-pmic-arb.yaml     | 120 ++++++++++++++++++
> >  3 files changed, 121 insertions(+), 66 deletions(-)
> >  delete mode 100644 Documentation/devicetree/bindings/spmi/qcom,spmi-pmic-arb.txt
> >  create mode 100644 Documentation/devicetree/bindings/spmi/qcom,spmi-pmic-arb.yaml
> 
> Applied, thanks.

Cancel.  I see that Rob already applied it.

-- 
Lee Jones [李琼斯]
Principal Technical Lead - Developer Services
Linaro.org │ Open source software for Arm SoCs
Follow Linaro: Facebook | Twitter | Blog