All of lore.kernel.org
 help / color / mirror / Atom feed
From: Slawomir Stepien <sst@poczta.fm>
To: Guenter Roeck <linux@roeck-us.net>
Cc: linux-hwmon@vger.kernel.org, linux-kernel@vger.kernel.org,
	Jean Delvare <jdelvare@suse.com>
Subject: Re: [PATCH 20/40] hwmon: (lm90) Add support for ADT7481, ADT7482, and ADT7483
Date: Fri, 27 May 2022 07:08:42 +0200	[thread overview]
Message-ID: <YpBc2uOTL6G6nREp@t480s.localdomain> (raw)
In-Reply-To: <20220525135758.2944744-21-linux@roeck-us.net>

On maj 25, 2022 06:57, Guenter Roeck wrote:
> ADT7481, ADT7482, and ADT7483 are similar to ADT7461, but support two
> external temperature sensors, similar to MAX6695/6696. They support an
> extended temperature range similar to ADT7461. Registers for the second
> external channel can be accessed directly or by using the same method as
> used by MAX6695/6696. For simplicity, the access method implemented for
> MAX6695/6696 is used.
> 
> The chips support PEC (packet error checking). Set the PEC feature flag
> and let the user decide if it should be enabled or not (it is by default
> disabled).
> 
> Even though it is only documented for ADT7483, all three chips support a
> secondary manufacturer ID register at 0x3e and a chip ID register at 0x3f.
> Use the contents of those registers register for improved chip detection
> accuracy. Add the same check to the ADT7461A detection code since this chip
> also supports the same (undocumented) registers.
> 
> Devicetree nodes are not added for the added chips since it is quite
> unlikely that such old chips will ever be used in a devicetree based
> system. They can be added later if needed.
> 
> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
> ---
>  Documentation/hwmon/lm90.rst |  38 +++++++++++
>  drivers/hwmon/Kconfig        |   3 +-
>  drivers/hwmon/lm90.c         | 119 ++++++++++++++++++++++++++---------
>  3 files changed, 129 insertions(+), 31 deletions(-)

Reviewed-by: Slawomir Stepien <sst@poczta.fm>

-- 
Slawomir Stepien

  reply	other threads:[~2022-05-27  5:08 UTC|newest]

Thread overview: 44+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-05-25 13:57 [PATCH 00/40] hwmon: (lm90) Various improvements to lm90 driver Guenter Roeck
2022-05-25 13:57 ` [PATCH 01/40] hwmon: (lm90) Generate sysfs and udev events for all alarms Guenter Roeck
2022-05-25 13:57 ` [PATCH 02/40] hwmon: (lm90) Rework alarm/status handling Guenter Roeck
2022-05-25 13:57 ` [PATCH 03/40] hwmon: (lm90) Reorder include files in alphabetical order Guenter Roeck
2022-05-25 13:57 ` [PATCH 04/40] hwmon: (lm90) Reorder chip enumeration to be " Guenter Roeck
2022-05-25 13:57 ` [PATCH 05/40] hwmon: (lm90) Use BIT macro Guenter Roeck
2022-05-25 13:57 ` [PATCH 06/40] hwmon: (lm90) Move status register bit shifts to compile time Guenter Roeck
2022-05-25 13:57 ` [PATCH 07/40] hwmon: (lm90) Stop using R_/W_ register prefix Guenter Roeck
2022-05-25 13:57 ` [PATCH 08/40] hwmon: (lm90) Improve PEC support Guenter Roeck
2022-05-25 13:57 ` [PATCH 09/40] hwmon: (lm90) Add partial PEC support for ADT7461 Guenter Roeck
2022-05-25 13:57 ` [PATCH 10/40] hwmon: (lm90) Enable full PEC support for ADT7461A Guenter Roeck
2022-05-25 13:57 ` [PATCH 11/40] hwmon: (lm90) Add support for unsigned and signed temperatures Guenter Roeck
2022-05-25 13:57 ` [PATCH 12/40] hwmon: (lm90) Only re-read registers if volatile Guenter Roeck
2022-05-25 13:57 ` [PATCH 13/40] hwmon: (lm90) Support multiple temperature resolutions Guenter Roeck
2022-05-26  7:12   ` Slawomir Stepien
2022-05-26 14:32     ` Guenter Roeck
2022-05-25 13:57 ` [PATCH 14/40] hwmon: (lm90) Use single flag to indicate extended temperature support Guenter Roeck
2022-05-25 13:57 ` [PATCH 15/40] hwmon: (lm90) Rework detect function Guenter Roeck
2022-05-25 13:57 ` [PATCH 16/40] hwmon: (lm90) Add support for additional chip revision of NCT1008 Guenter Roeck
2022-05-25 13:57 ` [PATCH 17/40] hwmon: (lm90) Fix/Add detection of G781-1 Guenter Roeck
2022-05-25 13:57 ` [PATCH 18/40] hwmon: (lm90) Add flag to indicate 'alarms' attribute support Guenter Roeck
2022-05-25 13:57 ` [PATCH 19/40] hwmon: (lm90) Add explicit support for MAX6648/MAX6692 Guenter Roeck
2022-05-25 13:57 ` [PATCH 20/40] hwmon: (lm90) Add support for ADT7481, ADT7482, and ADT7483 Guenter Roeck
2022-05-27  5:08   ` Slawomir Stepien [this message]
2022-05-25 13:57 ` [PATCH 21/40] hwmon: (lm90) Strengthen chip detection for ADM1032, ADT7461(A), and NCT1008 Guenter Roeck
2022-05-25 13:57 ` [PATCH 22/40] hwmon: (lm90) Add support for MAX6690 Guenter Roeck
2022-05-25 13:57 ` [PATCH 23/40] hwmon: (lm90) Add flag to indicate support for minimum temperature limits Guenter Roeck
2022-05-25 13:57 ` [PATCH 24/40] hwmon: (lm90) Add flag to indicate conversion rate support Guenter Roeck
2022-05-25 13:57 ` [PATCH 25/40] hwmon: (lm90) Add support for MAX6642 Guenter Roeck
2022-05-25 13:57 ` [PATCH 26/40] hwmon: (lm90) Let lm90_read16() handle 8-bit read operations Guenter Roeck
2022-05-25 13:57 ` [PATCH 27/40] hwmon: (lm90) Introduce 16-bit register write function Guenter Roeck
2022-05-25 13:57 ` [PATCH 28/40] hwmon: (lm90) Support MAX1617 and LM84 Guenter Roeck
2022-05-25 13:57 ` [PATCH 29/40] hwmon: (lm90) Add support for ADM1021, ADM1021A, and ADM1023 Guenter Roeck
2022-05-25 13:57 ` [PATCH 30/40] hwmon: (lm90) Add remaining chips supported by adm1021 driver Guenter Roeck
2022-05-25 13:57 ` [PATCH 31/40] hwmon: (lm90) Combine lm86 and lm90 configuration Guenter Roeck
2022-05-25 13:57 ` [PATCH 32/40] hwmon: (lm90) Add explicit support for NCT210 Guenter Roeck
2022-05-25 13:57 ` [PATCH 33/40] hwmon: (lm90) Add support for ON Semiconductor NCT214 and NCT72 Guenter Roeck
2022-05-25 13:57 ` [PATCH 34/40] hwmon: (lm90) Add support for ON Semiconductor NCT218 Guenter Roeck
2022-05-25 13:57 ` [PATCH 35/40] hwmon: (lm90) Add support for ADT7421 Guenter Roeck
2022-05-25 13:57 ` [PATCH 36/40] hwmon: (lm90) Only disable alerts if not already disabled Guenter Roeck
2022-05-25 13:57 ` [PATCH 37/40] hwmon: (lm90) Add explicit support for ADM1020 Guenter Roeck
2022-05-25 13:57 ` [PATCH 38/40] hwmon: (lm90) Add support and detection of Philips/NXP NE1618 Guenter Roeck
2022-05-25 13:57 ` [PATCH 39/40] hwmon: (lm90) Add table with supported Analog/ONSEMI devices Guenter Roeck
2022-05-25 13:57 ` [PATCH 40/40] hwmon: (lm90) Support temp_samples attribute Guenter Roeck

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=YpBc2uOTL6G6nREp@t480s.localdomain \
    --to=sst@poczta.fm \
    --cc=jdelvare@suse.com \
    --cc=linux-hwmon@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux@roeck-us.net \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.