Hi John, On Fri, Aug 12, 2022 at 12:13:20PM +0100, John Garry wrote: > On 12/08/2022 06:01, Oliver Sang wrote: > > hi, Damien Le Moal, > > > > On Tue, Aug 09, 2022 at 07:55:53AM -0700, Damien Le Moal wrote: > > > On 2022/08/09 2:58, John Garry wrote: > > > > On 08/08/2022 15:52, Damien Le Moal wrote: > > > > > On 2022/08/05 1:05, kernel test robot wrote: > > > > > > > > > > > > > > > > > > Greeting, > > > > > > > > > > > > FYI, we noticed a -15.0% regression of stress-ng.copy-file.ops_per_sec due to commit: > > > > > > > > > > > > > > > > > > commit: 0568e6122574dcc1aded2979cd0245038efe22b6 ("ata: libata-scsi: cap ata_device->max_sectors according to shost->max_sectors") > > > > > > https://git.kernel.org/cgit/linux/kernel/git/next/linux-next.git master > > > > > > > > > > > > in testcase: stress-ng > > > > > > on test machine: 96 threads 2 sockets Ice Lake with 256G memory > > > > > > with following parameters: > > > > > > > > > > > > nr_threads: 10% > > > > > > disk: 1HDD > > > > > > testtime: 60s > > > > > > fs: f2fs > > > > > > class: filesystem > > > > > > test: copy-file > > > > > > cpufreq_governor: performance > > > > > > ucode: 0xb000280 > > > > > > > > > > Without knowing what the device adapter is, hard to say where the problem is. I > > > > > suspect that with the patch applied, we may be ending up with a small default > > > > > max_sectors value, causing overhead due to more commands than necessary. > > > > > > > > > > Will check what I see with my test rig. > > > > > > > > As far as I can see, this patch should not make a difference unless the > > > > ATA shost driver is setting the max_sectors value unnecessarily low. > > > > > > That is my hunch too, hence my question about which host driver is being used > > > for this test... That is not apparent from the problem report. > > > > we noticed the commit is already in mainline now, and in our tests, there is > > still similar regression and also on other platforms. > > could you guide us how to check "which host driver is being used for this > > test"? hope to supply some useful information. > > > > For me, a complete kernel log may help. dmesg.xz is attached. also attached dmesg from parent (4cbfca5f77) > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > If you fix the issue, kindly add following tag > > > > > > Reported-by: kernel test robot > > > > > > > > > > > > > > > > > > Details are as below: > > > > > > --------------------------------------------------------------------------------------------------> > > > > > > > > > > > > > > > > > > To reproduce: > > > > > > > > > > > > git clone https://github.com/intel/lkp-tests.git > > > > > > cd lkp-tests > > > > > > sudo bin/lkp install job.yaml # job file is attached in this email > > > > > > bin/lkp split-job --compatible job.yaml # generate the yaml file for lkp run > > > > > > sudo bin/lkp run generated-yaml-file > > > > > > > > > > > > # if come across any failure that blocks the test, > > > > > > # please remove ~/.lkp and /lkp dir to run from a clean state. > > > > > > > > > > > > ========================================================================================= > > > > > > class/compiler/cpufreq_governor/disk/fs/kconfig/nr_threads/rootfs/tbox_group/test/testcase/testtime/ucode: > > > > > > filesystem/gcc-11/performance/1HDD/f2fs/x86_64-rhel-8.3/10%/debian-11.1-x86_64-20220510.cgz/lkp-icl-2sp1/copy-file/stress-ng/60s/0xb000280 > > > > > > > > > > > > commit: > > > > > > 4cbfca5f77 ("scsi: scsi_transport_sas: cap shost opt_sectors according to DMA optimal limit") > > > > > > 0568e61225 ("ata: libata-scsi: cap ata_device->max_sectors according to shost->max_sectors") > > > > > > > > > > > > 4cbfca5f7750520f 0568e6122574dcc1aded2979cd0 > > > > > > ---------------- --------------------------- > > > > > > %stddev %change %stddev > > > > > > \ | \ > > > > > > 1627 -14.9% 1385 stress-ng.copy-file.ops > > > > > > 27.01 -15.0% 22.96 stress-ng.copy-file.ops_per_sec > > > > > > 8935079 -11.9% 7870629 stress-ng.time.file_system_outputs > > > > > > 14.88 ± 5% -31.8% 10.14 ± 3% stress-ng.time.percent_of_cpu_this_job_got > > > > > > 50912 -14.7% 43413 vmstat.io.bo > > > > > > 93.78 +1.4% 95.10 iostat.cpu.idle > > > > > > 3.89 -31.6% 2.66 iostat.cpu.iowait > > > > > > 4.01 -1.3 2.74 mpstat.cpu.all.iowait% > > > > > > 0.23 ± 9% -0.1 0.17 ± 11% mpstat.cpu.all.sys% > > > > > > 1.66 ± 37% -1.2 0.51 ± 55% perf-profile.calltrace.cycles-pp.f2fs_write_end.generic_perform_write.f2fs_buffered_write_iter.f2fs_file_write_iter.do_iter_readv_writev > > > > > > 1.66 ± 37% -1.1 0.59 ± 25% perf-profile.children.cycles-pp.f2fs_write_end > > > > > > 1.51 ± 40% -1.1 0.45 ± 26% perf-profile.children.cycles-pp.f2fs_dirty_data_folio > > > > > > 1.21 ± 49% -1.0 0.23 ± 33% perf-profile.children.cycles-pp.f2fs_update_dirty_folio > > > > > > 0.88 ± 56% -0.8 0.04 ±111% perf-profile.children.cycles-pp.native_queued_spin_lock_slowpath > > > > > > 0.14 ± 26% +0.1 0.25 ± 28% perf-profile.children.cycles-pp.page_cache_ra_unbounded > > > > > > 0.88 ± 56% -0.8 0.04 ±112% perf-profile.self.cycles-pp.native_queued_spin_lock_slowpath > > > > > > 3164876 ± 9% -20.2% 2524713 ± 7% perf-stat.i.cache-misses > > > > > > 4.087e+08 -4.6% 3.899e+08 perf-stat.i.dTLB-loads > > > > > > 313050 ± 10% -18.4% 255410 ± 6% perf-stat.i.node-loads > > > > > > 972573 ± 9% -16.4% 812873 ± 6% perf-stat.i.node-stores > > > > > > 3114748 ± 9% -20.2% 2484807 ± 7% perf-stat.ps.cache-misses > > > > > > 4.022e+08 -4.6% 3.837e+08 perf-stat.ps.dTLB-loads > > > > > > 308178 ± 10% -18.4% 251418 ± 6% perf-stat.ps.node-loads > > > > > > 956996 ± 9% -16.4% 799948 ± 6% perf-stat.ps.node-stores > > > > > > 358486 -8.3% 328694 proc-vmstat.nr_active_file > > > > > > 1121620 -11.9% 987816 proc-vmstat.nr_dirtied > > > > > > 179906 -6.7% 167912 proc-vmstat.nr_dirty > > > > > > 1151201 -1.7% 1131322 proc-vmstat.nr_file_pages > > > > > > 100181 +9.9% 110078 ± 2% proc-vmstat.nr_inactive_file > > > > > > 846362 -14.6% 722471 proc-vmstat.nr_written > > > > > > 358486 -8.3% 328694 proc-vmstat.nr_zone_active_file > > > > > > 100181 +9.9% 110078 ± 2% proc-vmstat.nr_zone_inactive_file > > > > > > 180668 -6.8% 168456 proc-vmstat.nr_zone_write_pending > > > > > > 556469 -3.5% 536985 proc-vmstat.pgactivate > > > > > > 3385454 -14.6% 2889953 proc-vmstat.pgpgout > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Disclaimer: > > > > > > Results have been estimated based on internal Intel analysis and are provided > > > > > > for informational purposes only. Any difference in system hardware or software > > > > > > design or configuration may affect actual performance. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > -- > > > Damien Le Moal > > > Western Digital Research > > . >