On Thu, Sep 08, 2022 at 11:07:59AM +0700, Bagas Sanjaya wrote:
> Use code blocks for terminal output above:
> 
> ---- >8 ----
> t a/Documentation/x86/resctrl.rst b/Documentation/x86/resctrl.rst
> index 56581587c1a331..6474cf655792bf 100644
> --- a/Documentation/x86/resctrl.rst
> +++ b/Documentation/x86/resctrl.rst
> @@ -163,23 +163,23 @@ with the following files:
>  "mon_features":
>  		Lists the monitoring events if
>  		monitoring is enabled for the resource.
> -                Example output:
> +                Example::
>  
> -                # cat /sys/fs/resctrl/info/L3_MON/mon_features
> -                llc_occupancy
> -                mbm_total_bytes
> -                mbm_local_bytes
> +                   # cat /sys/fs/resctrl/info/L3_MON/mon_features
> +                   llc_occupancy
> +                   mbm_total_bytes
> +                   mbm_local_bytes
>  
>                  If the system supports Bandwidth Monitoring Event
>                  Configuration (BMEC), then the bandwidth events will
> -                be configurable. Then the output will be.
> +                be configurable. The output will be::
>  
> -                # cat /sys/fs/resctrl/info/L3_MON/mon_features
> -                llc_occupancy
> -                mbm_total_bytes
> -                mbm_total_config
> -                mbm_local_bytes
> -                mbm_local_config
> +                   # cat /sys/fs/resctrl/info/L3_MON/mon_features
> +                   llc_occupancy
> +                   mbm_total_bytes
> +                   mbm_total_config
> +                   mbm_local_bytes
> +                   mbm_local_config

Hi Babu,

The suggestion diff above looks corrupted, so here is the proper one:

---- >8 ----
diff --git a/Documentation/x86/resctrl.rst b/Documentation/x86/resctrl.rst
index 56581587c1a331..6474cf655792bf 100644
--- a/Documentation/x86/resctrl.rst
+++ b/Documentation/x86/resctrl.rst
@@ -163,23 +163,23 @@ with the following files:
 "mon_features":
 		Lists the monitoring events if
 		monitoring is enabled for the resource.
-                Example output:
+                Example::
 
-                # cat /sys/fs/resctrl/info/L3_MON/mon_features
-                llc_occupancy
-                mbm_total_bytes
-                mbm_local_bytes
+                   # cat /sys/fs/resctrl/info/L3_MON/mon_features
+                   llc_occupancy
+                   mbm_total_bytes
+                   mbm_local_bytes
 
                 If the system supports Bandwidth Monitoring Event
                 Configuration (BMEC), then the bandwidth events will
-                be configurable. Then the output will be.
+                be configurable. The output will be::
 
-                # cat /sys/fs/resctrl/info/L3_MON/mon_features
-                llc_occupancy
-                mbm_total_bytes
-                mbm_total_config
-                mbm_local_bytes
-                mbm_local_config
+                   # cat /sys/fs/resctrl/info/L3_MON/mon_features
+                   llc_occupancy
+                   mbm_total_bytes
+                   mbm_total_config
+                   mbm_local_bytes
+                   mbm_local_config
 
 "max_threshold_occupancy":
 		Read/write file provides the largest value (in

Thanks.

-- 
An old man doll... just what I always wanted! - Clara