On Thu, Jun 22, 2023 at 01:24:12PM +0200, Maxime Ripard wrote:
> Hi,
> 
> On Wed, Jun 21, 2023 at 05:35:09PM +0200, Thierry Reding wrote:
> > On Tue, Jun 20, 2023 at 12:09:09PM -0700, Stephen Boyd wrote:
> > > Quoting Maxime Ripard (2023-06-19 00:26:19)
> > > > On Mon, Jun 19, 2023 at 02:38:59AM +0300, Dmitry Osipenko wrote:
> > > > > 05.05.2023 14:26, Maxime Ripard пишет:
> > > > > > 
> > > > > > diff --git a/drivers/clk/tegra/clk-super.c b/drivers/clk/tegra/clk-super.c
> > > > > > index 3f3a7a203c5f..7ec47942720c 100644
> > > > > > --- a/drivers/clk/tegra/clk-super.c
> > > > > > +++ b/drivers/clk/tegra/clk-super.c
> > > > > > @@ -142,15 +142,22 @@ static const struct clk_ops tegra_clk_super_mux_ops = {
> > > > > >     .restore_context = clk_super_mux_restore_context,
> > > > > >  };
> > > > > >  
> > > > > > -static long clk_super_round_rate(struct clk_hw *hw, unsigned long rate,
> > > > > > -                            unsigned long *parent_rate)
> > > > > > +static int clk_super_determine_rate(struct clk_hw *hw,
> > > > > > +                               struct clk_rate_request *req)
> > > > > >  {
> > > > > >     struct tegra_clk_super_mux *super = to_clk_super_mux(hw);
> > > > > >     struct clk_hw *div_hw = &super->frac_div.hw;
> > > > > > +   unsigned long rate;
> > > > > >  
> > > > > >     __clk_hw_set_clk(div_hw, hw);
> > > > > >  
> > > > > > -   return super->div_ops->round_rate(div_hw, rate, parent_rate);
> > > > > > +   rate = super->div_ops->round_rate(div_hw, req->rate,
> > > > > > +                                     &req->best_parent_rate);
> > > > > > +   if (rate < 0)
> > > 
> > > There's the report that this condition is never possible. Maybe the
> > > previous code was relying on an error value sometimes. Can we add
> > > determine_rate to the div_ops and simplify this code? I asked on the
> > > list for that earlier.
> > 
> > I was able to reproduce this on a Tegra30 Beaver, but the problem is
> > more straightforward than this. The crash I was seeing during boot was
> > because cclk_super_determine_rate() was still calling the round_rate()
> > callback from tegra_clk_super_ops, which this patch removed (and added
> > determine_rate() instead).
> > 
> > The following fixes the problem for me. It's basically converting the
> > round_rate() call to an equivalent determine_rate() call.
> 
> Thanks for figuring it out :)
> 
> > Dmitry, can you verify that this fixes the issue that you were seeing?
> > 
> > Thierry
> > 
> > --- >8 ---
> > diff --git a/drivers/clk/tegra/clk-tegra-super-cclk.c b/drivers/clk/tegra/clk-tegra-super-cclk.c
> > index 68d7bcd5fc8a..8a2bb4ae4fd2 100644
> > --- a/drivers/clk/tegra/clk-tegra-super-cclk.c
> > +++ b/drivers/clk/tegra/clk-tegra-super-cclk.c
> > @@ -86,9 +86,16 @@ static int cclk_super_determine_rate(struct clk_hw *hw,
> >  	if (rate <= pllp_rate) {
> >  		if (super->flags & TEGRA20_SUPER_CLK)
> >  			rate = pllp_rate;
> > -		else
> > -			rate = tegra_clk_super_ops.round_rate(hw, rate,
> > -							      &pllp_rate);
> > +		else {
> > +			struct clk_rate_request parent = {
> > +				.rate = req->rate,
> > +				.best_parent_rate = pllp_rate,
> > +			};
> 
> If it works and you submit a patch later, this needs to be changed to
> clk_hw_init_rate_request()

I've tried this and while it seems to work, this doesn't seem to be
exactly the same as what the original code does. From what I understand
the parent clock can be either pll-p or pll-x, but what we want to do in
this branch is check what a configuration would look like for pll-p as
the parent. clk_hw_init_rate_request() would initialize the request with
data for the current parent, even if that's not pll-p, so I'm a bit
hesitant to go with that instead of manually hard-coding this to pll-p.

Thierry