* [U-Boot] [PATCH v2 2/5] arm64: mvebu: a8k: Add support for NAND clock get
@ 2017-04-05 15:22 kostap at marvell.com
2017-04-05 15:22 ` [U-Boot] [PATCH v2 4/5] arm64: a8k: dts: Add support for NAND devices on A8K platform kostap at marvell.com
` (3 more replies)
0 siblings, 4 replies; 9+ messages in thread
From: kostap at marvell.com @ 2017-04-05 15:22 UTC (permalink / raw)
To: u-boot
From: Konstantin Porotchkin <kostap@marvell.com>
Implement mvebu_get_nand_clock call for A8K family.
This function is used by PXA3XX NAND driver.
Signed-off-by: Konstantin Porotchkin <kostap@marvell.com>
Cc: Stefan Roese <sr@denx.de>
Cc: Igal Liberman <igall@marvell.com>
Cc: Nadav Haklai <nadavh@marvell.com>
---
Changes from v1:
- Add TODO notice for moving the functionality to a future clock driver
arch/arm/mach-mvebu/armada8k/cpu.c | 18 ++++++++++++++++++
1 file changed, 18 insertions(+)
diff --git a/arch/arm/mach-mvebu/armada8k/cpu.c b/arch/arm/mach-mvebu/armada8k/cpu.c
index 2325e9a..38e7d33 100644
--- a/arch/arm/mach-mvebu/armada8k/cpu.c
+++ b/arch/arm/mach-mvebu/armada8k/cpu.c
@@ -110,3 +110,21 @@ void reset_cpu(ulong ignored)
reg &= ~(1 << RFU_SW_RESET_OFFSET);
writel(reg, RFU_GLOBAL_SW_RST);
}
+
+/*
+ * TODO - implement this functionality using platform
+ * clock driver once it gets available
+ * Return NAND clock in Hz
+ */
+u32 mvebu_get_nand_clock(void)
+{
+ unsigned long NAND_FLASH_CLK_CTRL = 0xF2440700UL;
+ unsigned long NF_CLOCK_SEL_MASK = 0x1;
+ u32 reg;
+
+ reg = readl(NAND_FLASH_CLK_CTRL);
+ if (reg & NF_CLOCK_SEL_MASK)
+ return 400 * 1000000;
+ else
+ return 250 * 1000000;
+}
--
2.7.4
^ permalink raw reply related [flat|nested] 9+ messages in thread
* [U-Boot] [PATCH v2 4/5] arm64: a8k: dts: Add support for NAND devices on A8K platform
2017-04-05 15:22 [U-Boot] [PATCH v2 2/5] arm64: mvebu: a8k: Add support for NAND clock get kostap at marvell.com
@ 2017-04-05 15:22 ` kostap at marvell.com
2017-05-08 9:59 ` Stefan Roese
2017-05-09 14:40 ` Stefan Roese
2017-04-05 15:22 ` [U-Boot] [PATCH v2 5/5] arm64: mvebu: a8k: Add NAND configuration parameters kostap at marvell.com
` (2 subsequent siblings)
3 siblings, 2 replies; 9+ messages in thread
From: kostap at marvell.com @ 2017-04-05 15:22 UTC (permalink / raw)
To: u-boot
From: Konstantin Porotchkin <kostap@marvell.com>
Add NAND to CP master device tree. Add armada-7040-db-nand
device tree for the board configured with NAND boot device.
Add comment about boot device ID to armada-7040-db DTS.
Signed-off-by: Konstantin Porotchkin <kostap@marvell.com>
Cc: Stefan Roese <sr@denx.de>
Cc: Igal Liberman <igall@marvell.com>
Cc: Nadav Haklai <nadavh@marvell.com>
---
Changes from v1:
- Minor changes following review:
Add compatibility string
Mention NAND in board model description
arch/arm/dts/Makefile | 1 +
arch/arm/dts/armada-7040-db-nand.dts | 223 ++++++++++++++++++++++++++++++++++
arch/arm/dts/armada-7040-db.dts | 1 +
arch/arm/dts/armada-cp110-master.dtsi | 14 +++
4 files changed, 239 insertions(+)
create mode 100644 arch/arm/dts/armada-7040-db-nand.dts
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index 462c690..9ccff58 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -78,6 +78,7 @@ dtb-$(CONFIG_ARCH_MVEBU) += \
armada-388-gp.dtb \
armada-385-amc.dtb \
armada-7040-db.dtb \
+ armada-7040-db-nand.dtb \
armada-8040-db.dtb \
armada-8040-mcbin.dtb \
armada-xp-gp.dtb \
diff --git a/arch/arm/dts/armada-7040-db-nand.dts b/arch/arm/dts/armada-7040-db-nand.dts
new file mode 100644
index 0000000..3a9df21
--- /dev/null
+++ b/arch/arm/dts/armada-7040-db-nand.dts
@@ -0,0 +1,223 @@
+/*
+ * Copyright (C) 2017 Marvell Technology Group Ltd.
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPLv2 or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/*
+ * Device Tree file for Marvell Armada 7040 Development board platform
+ * Boot device: NAND, 0xE (SW3)
+ */
+
+#include "armada-7040.dtsi"
+
+/ {
+ model = "Marvell Armada 7040 DB board with NAND";
+ compatible = "marvell,armada7040-db-nand", "marvell,armada7040-db",
+ "marvell,armada7040", "marvell,armada-ap806-quad",
+ "marvell,armada-ap806";
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ aliases {
+ i2c0 = &cpm_i2c0;
+ spi0 = &cpm_spi1;
+ };
+
+ memory at 00000000 {
+ device_type = "memory";
+ reg = <0x0 0x0 0x0 0x80000000>;
+ };
+};
+
+&ap_pinctl {
+ /* MPP Bus:
+ * SDIO [0-5]
+ * UART0 [11,19]
+ */
+ /* 0 1 2 3 4 5 6 7 8 9 */
+ pin-func = < 0x1 0x1 0x1 0x1 0x1 0x1 0x0 0x0 0x0 0x0
+ 0x0 0x3 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x3 >;
+};
+
+&uart0 {
+ status = "okay";
+};
+
+
+&cpm_pcie2 {
+ status = "okay";
+};
+
+&cpm_i2c0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&cpm_i2c0_pins>;
+ status = "okay";
+ clock-frequency = <100000>;
+};
+
+&cpm_pinctl {
+ /* MPP Bus:
+ * AUDIO [0-5]
+ * GBE [6-11]
+ * SS_PWDN [12]
+ * NF_RBn [13]
+ * GPIO [14]
+ * DEV_BUS [15-27]
+ * SATA1 [28]
+ * UART0 [29-30]
+ * MSS_VTT_EN [31]
+ * SMI [32,34]
+ * XSMI [35-36]
+ * I2C [37-38]
+ * RGMII1 [44-55]
+ * SD [56-61]
+ * GPIO [62]
+ */
+ /* 0 1 2 3 4 5 6 7 8 9 */
+ pin-func = < 0x2 0x2 0x2 0x2 0x2 0x2 0x3 0x3 0x3 0x3
+ 0x3 0x3 0x0 0x2 0x0 0x1 0x1 0x1 0x1 0x1
+ 0x1 0x1 0x1 0x1 0x1 0x1 0x1 0x1 0x9 0xa
+ 0xa 0x0 0x7 0x0 0x7 0x7 0x7 0x2 0x2 0x0
+ 0x0 0x0 0x0 0x0 0x1 0x1 0x1 0x1 0x1 0x1
+ 0x1 0x1 0x1 0x1 0x1 0x1 0xe 0xe 0xe 0xe
+ 0xe 0xe 0x0>;
+};
+
+&cpm_spi1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&cpm_spi0_pins>;
+ status = "disabled";
+
+ spi-flash at 0 {
+ #address-cells = <0x1>;
+ #size-cells = <0x1>;
+ compatible = "jedec,spi-nor";
+ reg = <0x0>;
+ spi-max-frequency = <20000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition at 0 {
+ label = "U-Boot";
+ reg = <0x0 0x200000>;
+ };
+
+ partition at 400000 {
+ label = "Filesystem";
+ reg = <0x200000 0xe00000>;
+ };
+ };
+ };
+};
+
+&cpm_sata0 {
+ status = "okay";
+};
+
+&cpm_usb3_0 {
+ status = "okay";
+};
+
+&cpm_usb3_1 {
+ status = "okay";
+};
+
+&cpm_comphy {
+ phy0 {
+ phy-type = <PHY_TYPE_SGMII2>;
+ phy-speed = <PHY_SPEED_3_125G>;
+ };
+
+ phy1 {
+ phy-type = <PHY_TYPE_USB3_HOST0>;
+ phy-speed = <PHY_SPEED_5G>;
+ };
+
+ phy2 {
+ phy-type = <PHY_TYPE_SGMII0>;
+ phy-speed = <PHY_SPEED_1_25G>;
+ };
+
+ phy3 {
+ phy-type = <PHY_TYPE_SATA1>;
+ phy-speed = <PHY_SPEED_5G>;
+ };
+
+ phy4 {
+ phy-type = <PHY_TYPE_USB3_HOST1>;
+ phy-speed = <PHY_SPEED_5G>;
+ };
+
+ phy5 {
+ phy-type = <PHY_TYPE_PEX2>;
+ phy-speed = <PHY_SPEED_5G>;
+ };
+};
+
+&cpm_nand {
+ status = "okay";
+};
+
+&cpm_utmi0 {
+ status = "okay";
+};
+
+&cpm_utmi1 {
+ status = "okay";
+};
+
+&ap_sdhci0 {
+ status = "okay";
+ bus-width = <4>;
+ no-1-8-v;
+ non-removable;
+};
+
+&cpm_sdhci0 {
+ status = "okay";
+ bus-width = <4>;
+ no-1-8-v;
+ non-removable;
+};
diff --git a/arch/arm/dts/armada-7040-db.dts b/arch/arm/dts/armada-7040-db.dts
index 84e0dbd..c1a0f46 100644
--- a/arch/arm/dts/armada-7040-db.dts
+++ b/arch/arm/dts/armada-7040-db.dts
@@ -42,6 +42,7 @@
/*
* Device Tree file for Marvell Armada 7040 Development board platform
+ * Boot device: SPI NOR, 0x32 (SW3)
*/
#include "armada-7040.dtsi"
diff --git a/arch/arm/dts/armada-cp110-master.dtsi b/arch/arm/dts/armada-cp110-master.dtsi
index 229046f..56c1a12 100644
--- a/arch/arm/dts/armada-cp110-master.dtsi
+++ b/arch/arm/dts/armada-cp110-master.dtsi
@@ -273,6 +273,20 @@
dma-coherent;
status = "disabled";
};
+
+ cpm_nand: nand at 720000 {
+ compatible = "marvell,mvebu-pxa3xx-nand";
+ reg = <0x720000 0x100>;
+ #address-cells = <1>;
+
+ clocks = <&cpm_syscon0 1 2>;
+ nand-enable-arbiter;
+ num-cs = <1>;
+ nand-ecc-strength = <4>;
+ nand-ecc-step-size = <512>;
+ status = "disabled";
+ };
+
};
cpm_pcie0: pcie at f2600000 {
--
2.7.4
^ permalink raw reply related [flat|nested] 9+ messages in thread
* [U-Boot] [PATCH v2 5/5] arm64: mvebu: a8k: Add NAND configuration parameters
2017-04-05 15:22 [U-Boot] [PATCH v2 2/5] arm64: mvebu: a8k: Add support for NAND clock get kostap at marvell.com
2017-04-05 15:22 ` [U-Boot] [PATCH v2 4/5] arm64: a8k: dts: Add support for NAND devices on A8K platform kostap at marvell.com
@ 2017-04-05 15:22 ` kostap at marvell.com
2017-05-08 10:00 ` Stefan Roese
2017-05-09 14:40 ` Stefan Roese
2017-05-08 9:59 ` [U-Boot] [PATCH v2 2/5] arm64: mvebu: a8k: Add support for NAND clock get Stefan Roese
2017-05-09 14:39 ` Stefan Roese
3 siblings, 2 replies; 9+ messages in thread
From: kostap at marvell.com @ 2017-04-05 15:22 UTC (permalink / raw)
To: u-boot
From: Konstantin Porotchkin <kostap@marvell.com>
Add NAND configuration parameters to A8K shared config file.
Add defconfig for db-88f7040 board with boot from NAND setup.
Signed-off-by: Konstantin Porotchkin <kostap@marvell.com>
Cc: Stefan Roese <sr@denx.de>
Cc: Igal Liberman <igall@marvell.com>
Cc: Nadav Haklai <nadavh@marvell.com>
---
Changes from v1:
- Rebase on top of latest master branch changes
configs/mvebu_db-88f7040-nand_defconfig | 72 +++++++++++++++++++++++++++++++++
include/configs/mvebu_armada-8k.h | 11 +++++
2 files changed, 83 insertions(+)
create mode 100644 configs/mvebu_db-88f7040-nand_defconfig
diff --git a/configs/mvebu_db-88f7040-nand_defconfig b/configs/mvebu_db-88f7040-nand_defconfig
new file mode 100644
index 0000000..d86c18e
--- /dev/null
+++ b/configs/mvebu_db-88f7040-nand_defconfig
@@ -0,0 +1,72 @@
+CONFIG_ARM=y
+CONFIG_ARCH_MVEBU=y
+CONFIG_SYS_MALLOC_F_LEN=0x2000
+CONFIG_TARGET_MVEBU_ARMADA_8K=y
+CONFIG_DEFAULT_DEVICE_TREE="armada-7040-db-nand"
+CONFIG_SMBIOS_PRODUCT_NAME=""
+CONFIG_AHCI=y
+# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SYS_CONSOLE_INFO_QUIET=y
+CONFIG_BOARD_LATE_INIT=y
+# CONFIG_DISPLAY_CPUINFO is not set
+# CONFIG_DISPLAY_BOARDINFO is not set
+CONFIG_ARCH_EARLY_INIT_R=y
+CONFIG_BOARD_EARLY_INIT_F=y
+CONFIG_HUSH_PARSER=y
+# CONFIG_CMD_IMLS is not set
+# CONFIG_CMD_FLASH is not set
+CONFIG_CMD_MMC=y
+CONFIG_CMD_PART=y
+CONFIG_CMD_SF=y
+CONFIG_CMD_SPI=y
+CONFIG_CMD_I2C=y
+CONFIG_CMD_USB=y
+CONFIG_CMD_NAND=y
+# CONFIG_CMD_FPGA is not set
+# CONFIG_CMD_SETEXPR is not set
+CONFIG_CMD_TFTPPUT=y
+CONFIG_CMD_DHCP=y
+CONFIG_CMD_MII=y
+CONFIG_CMD_PING=y
+CONFIG_CMD_CACHE=y
+CONFIG_CMD_TIME=y
+CONFIG_CMD_MVEBU_BUBT=y
+CONFIG_CMD_EXT4=y
+CONFIG_CMD_EXT4_WRITE=y
+CONFIG_CMD_FAT=y
+CONFIG_CMD_FS_GENERIC=y
+CONFIG_MAC_PARTITION=y
+CONFIG_ISO_PARTITION=y
+CONFIG_EFI_PARTITION=y
+CONFIG_BLOCK_CACHE=y
+CONFIG_DM_I2C=y
+CONFIG_SYS_I2C_MVTWSI=y
+CONFIG_MISC=y
+CONFIG_DM_MMC=y
+CONFIG_MMC_SDHCI=y
+CONFIG_MMC_SDHCI_XENON=y
+CONFIG_SPI_FLASH=y
+CONFIG_SPI_FLASH_MACRONIX=y
+CONFIG_SPI_FLASH_SPANSION=y
+CONFIG_SPI_FLASH_STMICRO=y
+CONFIG_MVEBU_NAND_BOOT=y
+CONFIG_NAND_PXA3XX=y
+CONFIG_PHYLIB=y
+CONFIG_PCI=y
+CONFIG_DM_PCI=y
+CONFIG_PCIE_DW_MVEBU=y
+CONFIG_MVEBU_COMPHY_SUPPORT=y
+CONFIG_PINCTRL=y
+# CONFIG_SPL_SERIAL_PRESENT is not set
+CONFIG_DEBUG_UART=y
+CONFIG_DEBUG_UART_BASE=0xf0512000
+CONFIG_DEBUG_UART_CLOCK=200000000
+CONFIG_DEBUG_UART_SHIFT=2
+CONFIG_DEBUG_UART_ANNOUNCE=y
+CONFIG_SYS_NS16550=y
+CONFIG_USB=y
+CONFIG_DM_USB=y
+CONFIG_USB_XHCI_HCD=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_STORAGE=y
+CONFIG_SMBIOS_MANUFACTURER=""
diff --git a/include/configs/mvebu_armada-8k.h b/include/configs/mvebu_armada-8k.h
index 8ee5f27..9d3aeef 100644
--- a/include/configs/mvebu_armada-8k.h
+++ b/include/configs/mvebu_armada-8k.h
@@ -76,11 +76,22 @@
#define CONFIG_ENV_SPI_MODE CONFIG_SF_DEFAULT_MODE
/* Environment in SPI NOR flash */
+#ifdef CONFIG_MVEBU_SPI_BOOT
#define CONFIG_ENV_IS_IN_SPI_FLASH
+/* Environment in NAND flash */
+#elif defined(CONFIG_MVEBU_NAND_BOOT)
+#define CONFIG_ENV_IS_IN_NAND
+#endif
+
#define CONFIG_ENV_OFFSET 0x180000 /* as Marvell U-Boot version */
#define CONFIG_ENV_SIZE (64 << 10) /* 64KiB */
#define CONFIG_ENV_SECT_SIZE (64 << 10) /* 64KiB sectors */
+#define CONFIG_SYS_MAX_NAND_DEVICE 1
+#define CONFIG_SYS_NAND_MAX_CHIPS 1
+#define CONFIG_SYS_NAND_ONFI_DETECTION
+#define CONFIG_SYS_NAND_USE_FLASH_BBT
+
/*
* Ethernet Driver configuration
*/
--
2.7.4
^ permalink raw reply related [flat|nested] 9+ messages in thread
* [U-Boot] [PATCH v2 2/5] arm64: mvebu: a8k: Add support for NAND clock get
2017-04-05 15:22 [U-Boot] [PATCH v2 2/5] arm64: mvebu: a8k: Add support for NAND clock get kostap at marvell.com
2017-04-05 15:22 ` [U-Boot] [PATCH v2 4/5] arm64: a8k: dts: Add support for NAND devices on A8K platform kostap at marvell.com
2017-04-05 15:22 ` [U-Boot] [PATCH v2 5/5] arm64: mvebu: a8k: Add NAND configuration parameters kostap at marvell.com
@ 2017-05-08 9:59 ` Stefan Roese
2017-05-09 14:39 ` Stefan Roese
3 siblings, 0 replies; 9+ messages in thread
From: Stefan Roese @ 2017-05-08 9:59 UTC (permalink / raw)
To: u-boot
On 05.04.2017 17:22, kostap at marvell.com wrote:
> From: Konstantin Porotchkin <kostap@marvell.com>
>
> Implement mvebu_get_nand_clock call for A8K family.
> This function is used by PXA3XX NAND driver.
>
> Signed-off-by: Konstantin Porotchkin <kostap@marvell.com>
> Cc: Stefan Roese <sr@denx.de>
> Cc: Igal Liberman <igall@marvell.com>
> Cc: Nadav Haklai <nadavh@marvell.com>
Reviewed-by: Stefan Roese <sr@denx.de>
Thanks,
Stefan
^ permalink raw reply [flat|nested] 9+ messages in thread
* [U-Boot] [PATCH v2 4/5] arm64: a8k: dts: Add support for NAND devices on A8K platform
2017-04-05 15:22 ` [U-Boot] [PATCH v2 4/5] arm64: a8k: dts: Add support for NAND devices on A8K platform kostap at marvell.com
@ 2017-05-08 9:59 ` Stefan Roese
2017-05-09 14:40 ` Stefan Roese
1 sibling, 0 replies; 9+ messages in thread
From: Stefan Roese @ 2017-05-08 9:59 UTC (permalink / raw)
To: u-boot
On 05.04.2017 17:22, kostap at marvell.com wrote:
> From: Konstantin Porotchkin <kostap@marvell.com>
>
> Add NAND to CP master device tree. Add armada-7040-db-nand
> device tree for the board configured with NAND boot device.
> Add comment about boot device ID to armada-7040-db DTS.
>
> Signed-off-by: Konstantin Porotchkin <kostap@marvell.com>
> Cc: Stefan Roese <sr@denx.de>
> Cc: Igal Liberman <igall@marvell.com>
> Cc: Nadav Haklai <nadavh@marvell.com>
Reviewed-by: Stefan Roese <sr@denx.de>
Thanks,
Stefan
^ permalink raw reply [flat|nested] 9+ messages in thread
* [U-Boot] [PATCH v2 5/5] arm64: mvebu: a8k: Add NAND configuration parameters
2017-04-05 15:22 ` [U-Boot] [PATCH v2 5/5] arm64: mvebu: a8k: Add NAND configuration parameters kostap at marvell.com
@ 2017-05-08 10:00 ` Stefan Roese
2017-05-09 14:40 ` Stefan Roese
1 sibling, 0 replies; 9+ messages in thread
From: Stefan Roese @ 2017-05-08 10:00 UTC (permalink / raw)
To: u-boot
On 05.04.2017 17:22, kostap at marvell.com wrote:
> From: Konstantin Porotchkin <kostap@marvell.com>
>
> Add NAND configuration parameters to A8K shared config file.
> Add defconfig for db-88f7040 board with boot from NAND setup.
>
> Signed-off-by: Konstantin Porotchkin <kostap@marvell.com>
> Cc: Stefan Roese <sr@denx.de>
> Cc: Igal Liberman <igall@marvell.com>
> Cc: Nadav Haklai <nadavh@marvell.com>
Reviewed-by: Stefan Roese <sr@denx.de>
Thanks,
Stefan
^ permalink raw reply [flat|nested] 9+ messages in thread
* [U-Boot] [PATCH v2 2/5] arm64: mvebu: a8k: Add support for NAND clock get
2017-04-05 15:22 [U-Boot] [PATCH v2 2/5] arm64: mvebu: a8k: Add support for NAND clock get kostap at marvell.com
` (2 preceding siblings ...)
2017-05-08 9:59 ` [U-Boot] [PATCH v2 2/5] arm64: mvebu: a8k: Add support for NAND clock get Stefan Roese
@ 2017-05-09 14:39 ` Stefan Roese
3 siblings, 0 replies; 9+ messages in thread
From: Stefan Roese @ 2017-05-09 14:39 UTC (permalink / raw)
To: u-boot
On 05.04.2017 17:22, kostap at marvell.com wrote:
> From: Konstantin Porotchkin <kostap@marvell.com>
>
> Implement mvebu_get_nand_clock call for A8K family.
> This function is used by PXA3XX NAND driver.
>
> Signed-off-by: Konstantin Porotchkin <kostap@marvell.com>
> Cc: Stefan Roese <sr@denx.de>
> Cc: Igal Liberman <igall@marvell.com>
> Cc: Nadav Haklai <nadavh@marvell.com>
Applied to u-boot-marvell/master.
Thanks,
Stefan
^ permalink raw reply [flat|nested] 9+ messages in thread
* [U-Boot] [PATCH v2 4/5] arm64: a8k: dts: Add support for NAND devices on A8K platform
2017-04-05 15:22 ` [U-Boot] [PATCH v2 4/5] arm64: a8k: dts: Add support for NAND devices on A8K platform kostap at marvell.com
2017-05-08 9:59 ` Stefan Roese
@ 2017-05-09 14:40 ` Stefan Roese
1 sibling, 0 replies; 9+ messages in thread
From: Stefan Roese @ 2017-05-09 14:40 UTC (permalink / raw)
To: u-boot
On 05.04.2017 17:22, kostap at marvell.com wrote:
> From: Konstantin Porotchkin <kostap@marvell.com>
>
> Add NAND to CP master device tree. Add armada-7040-db-nand
> device tree for the board configured with NAND boot device.
> Add comment about boot device ID to armada-7040-db DTS.
>
> Signed-off-by: Konstantin Porotchkin <kostap@marvell.com>
> Cc: Stefan Roese <sr@denx.de>
> Cc: Igal Liberman <igall@marvell.com>
> Cc: Nadav Haklai <nadavh@marvell.com>
Applied to u-boot-marvell/master.
Thanks,
Stefan
^ permalink raw reply [flat|nested] 9+ messages in thread
* [U-Boot] [PATCH v2 5/5] arm64: mvebu: a8k: Add NAND configuration parameters
2017-04-05 15:22 ` [U-Boot] [PATCH v2 5/5] arm64: mvebu: a8k: Add NAND configuration parameters kostap at marvell.com
2017-05-08 10:00 ` Stefan Roese
@ 2017-05-09 14:40 ` Stefan Roese
1 sibling, 0 replies; 9+ messages in thread
From: Stefan Roese @ 2017-05-09 14:40 UTC (permalink / raw)
To: u-boot
On 05.04.2017 17:22, kostap at marvell.com wrote:
> From: Konstantin Porotchkin <kostap@marvell.com>
>
> Add NAND configuration parameters to A8K shared config file.
> Add defconfig for db-88f7040 board with boot from NAND setup.
>
> Signed-off-by: Konstantin Porotchkin <kostap@marvell.com>
> Cc: Stefan Roese <sr@denx.de>
> Cc: Igal Liberman <igall@marvell.com>
> Cc: Nadav Haklai <nadavh@marvell.com>
Applied to u-boot-marvell/master.
Thanks,
Stefan
^ permalink raw reply [flat|nested] 9+ messages in thread
end of thread, other threads:[~2017-05-09 14:40 UTC | newest]
Thread overview: 9+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2017-04-05 15:22 [U-Boot] [PATCH v2 2/5] arm64: mvebu: a8k: Add support for NAND clock get kostap at marvell.com
2017-04-05 15:22 ` [U-Boot] [PATCH v2 4/5] arm64: a8k: dts: Add support for NAND devices on A8K platform kostap at marvell.com
2017-05-08 9:59 ` Stefan Roese
2017-05-09 14:40 ` Stefan Roese
2017-04-05 15:22 ` [U-Boot] [PATCH v2 5/5] arm64: mvebu: a8k: Add NAND configuration parameters kostap at marvell.com
2017-05-08 10:00 ` Stefan Roese
2017-05-09 14:40 ` Stefan Roese
2017-05-08 9:59 ` [U-Boot] [PATCH v2 2/5] arm64: mvebu: a8k: Add support for NAND clock get Stefan Roese
2017-05-09 14:39 ` Stefan Roese
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.