From mboxrd@z Thu Jan 1 00:00:00 1970 From: Michal Simek Date: Thu, 21 Jul 2016 16:58:18 +0200 Subject: [U-Boot] [PATCH] Kconfig: Move option CONFIG_SYS_NO_FLASH to Kconfig In-Reply-To: <20160721144624.GD1623@bill-the-cat> References: <1468905142-12539-1-git-send-email-sivadur@xilinx.com> <9f8d48d8-744f-ab33-e6a7-ff264cdbc7e1@xilinx.com> <20160721144624.GD1623@bill-the-cat> Message-ID: List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On 21.7.2016 16:46, Tom Rini wrote: > On Thu, Jul 21, 2016 at 01:51:20PM +0200, Michal Simek wrote: >> Hi Tom, >> >> On 19.7.2016 07:12, Siva Durga Prasad Paladugu wrote: >>> Move config option CONFIG_SYS_NO_FLASH as Kconfig >>> option. All the boards which needs to enable this >>> option can be done through defconfigs >>> >>> Signed-off-by: Siva Durga Prasad Paladugu >>> --- >>> Changes for v2: >>> - No changes >>> --- >>> common/Kconfig | 6 ++++++ >>> 1 file changed, 6 insertions(+) >>> >>> diff --git a/common/Kconfig b/common/Kconfig >>> index 8adc821..46e7173 100644 >>> --- a/common/Kconfig >>> +++ b/common/Kconfig >>> @@ -197,3 +197,9 @@ config CONSOLE_RECORD_IN_SIZE >>> tstc() and getc() will use this in preference to real device input. >>> The buffer is allocated immediately after the malloc() region is >>> ready. >>> + >>> +config SYS_NO_FLASH >>> + bool "Disable support for parallel NOR flash" >>> + default n >>> + help >>> + This option is used to disable support for parallel NOR flash. >>> >> >> Do you want to take this patch to your tree? >> Or should I take it to my tree with others patches which remove this >> option for zynq boards? > > Is it blocking other changes? If no, I'll grab it probably post -rc2 > and migrate all config files, if yes, um, if we can grab this now and > migrate later without adding a ton of warnings, we can go that way. There are 2 follow up patches which depends on this one. http://lists.denx.de/pipermail/u-boot/2016-July/260970.html http://lists.denx.de/pipermail/u-boot/2016-July/260972.html The point here that they are removing board files for 4 boards. But if you want to do it after rc2 I am fine with it. Thanks, Michal