[PATCH v2 13/21] docs: hwmon: ads1015: convert to ReST format

[Mauro Carvalho Chehab <mchehab+samsung@kernel.org>]

Convert ads1015 to ReST format, in order to allow it to
be parsed by Sphinx.

Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
---
 Documentation/hwmon/ads1015 | 72 ++++++++++++++++++++++---------------
 1 file changed, 43 insertions(+), 29 deletions(-)

diff --git a/Documentation/hwmon/ads1015 b/Documentation/hwmon/ads1015
index 02d2a459385f..e0951c4e57bb 100644
--- a/Documentation/hwmon/ads1015
+++ b/Documentation/hwmon/ads1015
@@ -2,17 +2,25 @@ Kernel driver ads1015
 =====================
 
 Supported chips:
+
   * Texas Instruments ADS1015
+
     Prefix: 'ads1015'
-    Datasheet: Publicly available at the Texas Instruments website :
-               http://focus.ti.com/lit/ds/symlink/ads1015.pdf
+
+    Datasheet: Publicly available at the Texas Instruments website:
+
+	       http://focus.ti.com/lit/ds/symlink/ads1015.pdf
+
   * Texas Instruments ADS1115
+
     Prefix: 'ads1115'
-    Datasheet: Publicly available at the Texas Instruments website :
-               http://focus.ti.com/lit/ds/symlink/ads1115.pdf
+
+    Datasheet: Publicly available at the Texas Instruments website:
+
+	       http://focus.ti.com/lit/ds/symlink/ads1115.pdf
 
 Authors:
-        Dirk Eibach, Guntermann & Drunck GmbH <eibach@gdsys.de>
+	Dirk Eibach, Guntermann & Drunck GmbH <eibach@gdsys.de>
 
 Description
 -----------
@@ -24,14 +32,15 @@ This device is a 12/16-bit A-D converter with 4 inputs.
 The inputs can be used single ended or in certain differential combinations.
 
 The inputs can be made available by 8 sysfs input files in0_input - in7_input:
-in0: Voltage over AIN0 and AIN1.
-in1: Voltage over AIN0 and AIN3.
-in2: Voltage over AIN1 and AIN3.
-in3: Voltage over AIN2 and AIN3.
-in4: Voltage over AIN0 and GND.
-in5: Voltage over AIN1 and GND.
-in6: Voltage over AIN2 and GND.
-in7: Voltage over AIN3 and GND.
+
+  - in0: Voltage over AIN0 and AIN1.
+  - in1: Voltage over AIN0 and AIN3.
+  - in2: Voltage over AIN1 and AIN3.
+  - in3: Voltage over AIN2 and AIN3.
+  - in4: Voltage over AIN0 and GND.
+  - in5: Voltage over AIN1 and GND.
+  - in6: Voltage over AIN2 and GND.
+  - in7: Voltage over AIN3 and GND.
 
 Which inputs are available can be configured using platform data or devicetree.
 
@@ -42,29 +51,34 @@ Platform Data
 
 In linux/platform_data/ads1015.h platform data is defined, channel_data contains
 configuration data for the used input combinations:
+
 - pga is the programmable gain amplifier (values are full scale)
-  0: +/- 6.144 V
-  1: +/- 4.096 V
-  2: +/- 2.048 V
-  3: +/- 1.024 V
-  4: +/- 0.512 V
-  5: +/- 0.256 V
+
+    - 0: +/- 6.144 V
+    - 1: +/- 4.096 V
+    - 2: +/- 2.048 V
+    - 3: +/- 1.024 V
+    - 4: +/- 0.512 V
+    - 5: +/- 0.256 V
+
 - data_rate in samples per second
-  0: 128
-  1: 250
-  2: 490
-  3: 920
-  4: 1600
-  5: 2400
-  6: 3300
 
-Example:
-struct ads1015_platform_data data = {
+    - 0: 128
+    - 1: 250
+    - 2: 490
+    - 3: 920
+    - 4: 1600
+    - 5: 2400
+    - 6: 3300
+
+Example::
+
+  struct ads1015_platform_data data = {
 	.channel_data = {
 		[2] = { .enabled = true, .pga = 1, .data_rate = 0 },
 		[4] = { .enabled = true, .pga = 4, .data_rate = 5 },
 	}
-};
+  };
 
 In this case only in2_input (FS +/- 4.096 V, 128 SPS) and in4_input
 (FS +/- 0.512 V, 2400 SPS) would be created.
-- 
2.20.1