From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S934504AbdA0Ls0 (ORCPT ); Fri, 27 Jan 2017 06:48:26 -0500 Received: from mx2.suse.de ([195.135.220.15]:34099 "EHLO mx2.suse.de" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S933546AbdA0LFn (ORCPT ); Fri, 27 Jan 2017 06:05:43 -0500 X-Amavis-Alert: BAD HEADER SECTION, Duplicate header field: "References" From: Jiri Slaby To: stable@vger.kernel.org Cc: linux-kernel@vger.kernel.org, Johan Hovold , Jiri Slaby Subject: [PATCH 3.12 104/235] USB: serial: mos7720: fix use-after-free on probe errors Date: Fri, 27 Jan 2017 11:53:57 +0100 Message-Id: X-Mailer: git-send-email 2.11.0 In-Reply-To: <5b46dc789ca2be4046e4e40a131858d386cac741.1485514374.git.jslaby@suse.cz> References: <5b46dc789ca2be4046e4e40a131858d386cac741.1485514374.git.jslaby@suse.cz> In-Reply-To: References: Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org From: Johan Hovold 3.12-stable review patch. If anyone has any objections, please let me know. =============== commit 91a1ff4d53c5184d383d0baeeaeab6f9736f2ff3 upstream. The interrupt URB was submitted on probe but never stopped on probe errors. This can lead to use-after-free issues in the completion handler when accessing the freed usb-serial struct: Unable to handle kernel paging request at virtual address 6b6b6be7 ... [] (mos7715_interrupt_callback [mos7720]) from [] (__usb_hcd_giveback_urb+0x80/0x140) [] (__usb_hcd_giveback_urb) from [] (usb_hcd_giveback_urb+0x50/0x138) [] (usb_hcd_giveback_urb) from [] (musb_giveback+0xc8/0x1cc) Fixes: b69578df7e98 ("USB: usbserial: mos7720: add support for parallel port on moschip 7715") Signed-off-by: Johan Hovold Signed-off-by: Jiri Slaby --- drivers/usb/serial/mos7720.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/drivers/usb/serial/mos7720.c b/drivers/usb/serial/mos7720.c index b0695b667fb2..67be5d26d7a3 100644 --- a/drivers/usb/serial/mos7720.c +++ b/drivers/usb/serial/mos7720.c @@ -1961,8 +1961,10 @@ static int mos7720_startup(struct usb_serial *serial) #ifdef CONFIG_USB_SERIAL_MOS7715_PARPORT if (product == MOSCHIP_DEVICE_ID_7715) { ret_val = mos7715_parport_init(serial); - if (ret_val < 0) + if (ret_val < 0) { + usb_kill_urb(serial->port[0]->interrupt_in_urb); return ret_val; + } } #endif /* LSR For Port 1 */ @@ -1974,6 +1976,8 @@ static int mos7720_startup(struct usb_serial *serial) static void mos7720_release(struct usb_serial *serial) { + usb_kill_urb(serial->port[0]->interrupt_in_urb); + #ifdef CONFIG_USB_SERIAL_MOS7715_PARPORT /* close the parallel port */ -- 2.11.0