From: Wren Turkal <wt@penguintechs.org>
To: ath11k@lists.infradead.org
Subject: 5.14 rc6 broken for QCA6390 on Dell XPS 13 9310
Date: Sun, 22 Aug 2021 14:08:11 -0700 [thread overview]
Message-ID: <a8cddf24-ecfc-088e-27f4-98cbbb5fb67c@penguintechs.org> (raw)
I have no device for the wifi on my computer. 5.13 worked pretty well. I
also found others reporting similar issues:
https://forum.manjaro.org/t/kernel5-14-rc6-ath11k-on-qca6390-regression-mhi-probe-failure/79362
Here's info about the hardware on my laptop:
➜ ~ sudo dmidecode -s system-product-name
XPS 13 9310
➜ ~ sudo dmidecode -s bios-version
3.0.4
➜ ~ sudo lspci -s 72:00 -vvv
72:00.0 Unassigned class [ff00]: Qualcomm QCA6390 Wireless Network
Adapter [AX500-DBS (2x2)]
Subsystem: Rivet Networks Device a501
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin ? routed to IRQ 179
Region 0: Memory at a2500000 (64-bit, non-prefetchable) [size=1M]
Capabilities: [40] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [50] MSI: Enable+ Count=32/32 Maskable+ 64bit-
Address: fee00c18 Data: 0000
Masking: fffffc00 Pending: 00000000
Capabilities: [70] Express (v2) Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s unlimited, L1
unlimited
ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset- SlotPowerLimit 10.000W
DevCtl: CorrErr- NonFatalErr- FatalErr- UnsupReq-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr+ NonFatalErr- FatalErr- UnsupReq+ AuxPwr+ TransPend-
LnkCap: Port #0, Speed 8GT/s, Width x1, ASPM L0s L1, Exit Latency L0s
<1us, L1 <64us
ClockPM- Surprise- LLActRep- BwNot- ASPMOptComp+
LnkCtl: ASPM Disabled; RCB 64 bytes, Disabled- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 5GT/s (downgraded), Width x1 (ok)
TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
DevCap2: Completion Timeout: Range ABCD, TimeoutDis+ NROPrPrP- LTR+
10BitTagComp- 10BitTagReq- OBFF Not Supported, ExtFmt- EETLPPrefix-
EmergencyPowerReduction Not Supported, EmergencyPowerReductionInit-
FRS- TPHComp+ ExtTPHComp-
AtomicOpsCap: 32bit- 64bit- 128bitCAS-
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- LTR+ OBFF Disabled,
AtomicOpsCtl: ReqEn-
LnkCap2: Supported Link Speeds: 2.5-8GT/s, Crosslink- Retimer-
2Retimers- DRS-
LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-
Transmit Margin: Normal Operating Range, EnterModifiedCompliance-
ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete-
EqualizationPhase1-
EqualizationPhase2- EqualizationPhase3- LinkEqualizationRequest-
Retimer- 2Retimers- CrosslinkRes: unsupported
Capabilities: [100 v2] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF-
MalfTLP- ECRC- UnsupReq- ACSViol-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF-
MalfTLP- ECRC- UnsupReq- ACSViol-
UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+
MalfTLP+ ECRC- UnsupReq- ACSViol-
CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- AdvNonFatalErr+
CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- AdvNonFatalErr+
AERCap: First Error Pointer: 00, ECRCGenCap+ ECRCGenEn- ECRCChkCap+
ECRCChkEn-
MultHdrRecCap- MultHdrRecEn- TLPPfxPres- HdrLogCap-
HeaderLog: 00000000 00000000 00000000 00000000
Capabilities: [148 v1] Secondary PCI Express
LnkCtl3: LnkEquIntrruptEn- PerformEqu-
LaneErrStat: 0
Capabilities: [158 v1] Transaction Processing Hints
No steering table available
Capabilities: [1e4 v1] Latency Tolerance Reporting
Max snoop latency: 3145728ns
Max no snoop latency: 3145728ns
Capabilities: [1ec v1] L1 PM Substates
L1SubCap: PCI-PM_L1.2+ PCI-PM_L1.1+ ASPM_L1.2+ ASPM_L1.1+ L1_PM_Substates+
PortCommonModeRestoreTime=70us PortTPowerOnTime=0us
L1SubCtl1: PCI-PM_L1.2+ PCI-PM_L1.1+ ASPM_L1.2+ ASPM_L1.1+
T_CommonMode=0us LTR1.2_Threshold=98304ns
L1SubCtl2: T_PwrOn=44us
Kernel driver in use: ath11k_pci
Kernel modules: ath11k_pci
Thanks for all the dev on this,
wt
--
You're more amazing than you think! ymatyt.com
--
ath11k mailing list
ath11k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath11k
next reply other threads:[~2021-08-22 21:08 UTC|newest]
Thread overview: 38+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-08-22 21:08 Wren Turkal [this message]
2021-08-23 12:53 ` 5.14 rc6 broken for QCA6390 on Dell XPS 13 9310 Kalle Valo
2021-08-23 12:53 ` Kalle Valo
2021-08-23 16:02 ` Nicolas Schichan
2021-08-23 16:02 ` Nicolas Schichan
2021-08-23 17:40 ` Kalle Valo
2021-08-23 17:40 ` Kalle Valo
2021-08-26 14:25 ` [regression] " Kalle Valo
2021-08-26 14:25 ` Kalle Valo
2021-08-26 14:38 ` Greg Kroah-Hartman
2021-08-26 14:38 ` Greg Kroah-Hartman
2021-08-26 14:48 ` Jakub Kicinski
2021-08-26 14:48 ` Jakub Kicinski
2021-08-26 15:00 ` Kalle Valo
2021-08-26 15:00 ` Kalle Valo
2021-08-26 15:00 ` Kalle Valo
2021-08-26 17:33 ` Kalle Valo
2021-08-26 17:33 ` Kalle Valo
2021-08-26 17:33 ` Kalle Valo
2021-08-26 18:12 ` Jakub Kicinski
2021-08-26 18:12 ` Jakub Kicinski
2021-08-27 12:41 ` Kalle Valo
2021-08-27 12:41 ` Kalle Valo
2021-08-27 12:41 ` Kalle Valo
2021-08-30 16:04 ` Nicolas Schichan
2021-08-30 16:04 ` Nicolas Schichan
2021-08-30 16:04 ` Nicolas Schichan
2021-08-31 10:37 ` Kalle Valo
2021-08-31 10:37 ` Kalle Valo
2021-08-31 10:37 ` Kalle Valo
2021-08-27 12:46 ` Kalle Valo
2021-08-27 12:46 ` Kalle Valo
2021-08-27 12:46 ` Kalle Valo
2021-08-23 16:17 ` Wren Turkal
2021-08-23 16:17 ` Wren Turkal
2021-08-27 12:43 ` Kalle Valo
2021-08-27 12:43 ` Kalle Valo
2021-08-27 12:43 ` Kalle Valo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=a8cddf24-ecfc-088e-27f4-98cbbb5fb67c@penguintechs.org \
--to=wt@penguintechs.org \
--cc=ath11k@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.