From: Leon Romanovsky <leon@kernel.org>
To: "David S. Miller" <davem@davemloft.net>,
Jakub Kicinski <kuba@kernel.org>, Jiri Pirko <jiri@nvidia.com>
Cc: Leon Romanovsky <leonro@nvidia.com>,
linux-kernel@vger.kernel.org, netdev@vger.kernel.org,
Parav Pandit <parav@nvidia.com>
Subject: [PATCH net-next v1 1/2] devlink: Break parameter notification sequence to be before/after unload/load driver
Date: Thu, 29 Jul 2021 16:17:49 +0300 [thread overview]
Message-ID: <a9a61cdee79cbfefa4e4e2cc973fe27a10b7ee4f.1627564383.git.leonro@nvidia.com> (raw)
In-Reply-To: <cover.1627564383.git.leonro@nvidia.com>
From: Leon Romanovsky <leonro@nvidia.com>
The change of namespaces during devlink reload calls to driver unload
before it accesses devlink parameters. The commands below causes to
use-after-free bug when trying to get flow steering mode.
* ip netns add n1
* devlink dev reload pci/0000:00:09.0 netns n1
==================================================================
BUG: KASAN: use-after-free in mlx5_devlink_fs_mode_get+0x96/0xa0 [mlx5_core]
Read of size 4 at addr ffff888009d04308 by task devlink/275
CPU: 6 PID: 275 Comm: devlink Not tainted 5.12.0-rc2+ #2853
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
Call Trace:
dump_stack+0x93/0xc2
print_address_description.constprop.0+0x18/0x140
? mlx5_devlink_fs_mode_get+0x96/0xa0 [mlx5_core]
? mlx5_devlink_fs_mode_get+0x96/0xa0 [mlx5_core]
kasan_report.cold+0x7c/0xd8
? mlx5_devlink_fs_mode_get+0x96/0xa0 [mlx5_core]
mlx5_devlink_fs_mode_get+0x96/0xa0 [mlx5_core]
devlink_nl_param_fill+0x1c8/0xe80
? __free_pages_ok+0x37a/0x8a0
? devlink_flash_update_timeout_notify+0xd0/0xd0
? lock_acquire+0x1a9/0x6d0
? fs_reclaim_acquire+0xb7/0x160
? lock_is_held_type+0x98/0x110
? 0xffffffff81000000
? lock_release+0x1f9/0x6c0
? fs_reclaim_release+0xa1/0xf0
? lock_downgrade+0x6d0/0x6d0
? lock_is_held_type+0x98/0x110
? lock_is_held_type+0x98/0x110
? memset+0x20/0x40
? __build_skb_around+0x1f8/0x2b0
devlink_param_notify+0x6d/0x180
devlink_reload+0x1c3/0x520
? devlink_remote_reload_actions_performed+0x30/0x30
? mutex_trylock+0x24b/0x2d0
? devlink_nl_cmd_reload+0x62b/0x1070
devlink_nl_cmd_reload+0x66d/0x1070
? devlink_reload+0x520/0x520
? devlink_get_from_attrs+0x1bc/0x260
? devlink_nl_pre_doit+0x64/0x4d0
genl_family_rcv_msg_doit+0x1e9/0x2f0
? mutex_lock_io_nested+0x1130/0x1130
? genl_family_rcv_msg_attrs_parse.constprop.0+0x240/0x240
? security_capable+0x51/0x90
genl_rcv_msg+0x27f/0x4a0
? genl_get_cmd+0x3c0/0x3c0
? lock_acquire+0x1a9/0x6d0
? devlink_reload+0x520/0x520
? lock_release+0x6c0/0x6c0
netlink_rcv_skb+0x11d/0x340
? genl_get_cmd+0x3c0/0x3c0
? netlink_ack+0x9f0/0x9f0
? lock_release+0x1f9/0x6c0
genl_rcv+0x24/0x40
netlink_unicast+0x433/0x700
? netlink_attachskb+0x730/0x730
? _copy_from_iter_full+0x178/0x650
? __alloc_skb+0x113/0x2b0
netlink_sendmsg+0x6f1/0xbd0
? netlink_unicast+0x700/0x700
? lock_is_held_type+0x98/0x110
? netlink_unicast+0x700/0x700
sock_sendmsg+0xb0/0xe0
__sys_sendto+0x193/0x240
? __x64_sys_getpeername+0xb0/0xb0
? do_sys_openat2+0x10b/0x370
? __up_read+0x1a1/0x7b0
? do_user_addr_fault+0x219/0xdc0
? __x64_sys_openat+0x120/0x1d0
? __x64_sys_open+0x1a0/0x1a0
__x64_sys_sendto+0xdd/0x1b0
? syscall_enter_from_user_mode+0x1d/0x50
do_syscall_64+0x2d/0x40
entry_SYSCALL_64_after_hwframe+0x44/0xae
RIP: 0033:0x7fc69d0af14a
Code: d8 64 89 02 48 c7 c0 ff ff ff ff eb b8 0f 1f 00 f3 0f 1e fa 41 89 ca 64 8b 04 25 18 00 00 00 85 c0 75 15 b8 2c 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 76 c3 0f 1f 44 00 00 55 48 83 ec 30 44 89 4c
RSP: 002b:00007ffc1d8292f8 EFLAGS: 00000246 ORIG_RAX: 000000000000002c
RAX: ffffffffffffffda RBX: 0000000000000005 RCX: 00007fc69d0af14a
RDX: 0000000000000038 RSI: 0000555f57c56440 RDI: 0000000000000003
RBP: 0000555f57c56410 R08: 00007fc69d17b200 R09: 000000000000000c
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000
R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000
Allocated by task 146:
kasan_save_stack+0x1b/0x40
__kasan_kmalloc+0x99/0xc0
mlx5_init_fs+0xf0/0x1c50 [mlx5_core]
mlx5_load+0xd2/0x180 [mlx5_core]
mlx5_init_one+0x2f6/0x450 [mlx5_core]
probe_one+0x47d/0x6e0 [mlx5_core]
pci_device_probe+0x2a0/0x4a0
really_probe+0x20a/0xc90
driver_probe_device+0xd8/0x380
device_driver_attach+0x1df/0x250
__driver_attach+0xff/0x240
bus_for_each_dev+0x11e/0x1a0
bus_add_driver+0x309/0x570
driver_register+0x1ee/0x380
0xffffffffa06b8062
do_one_initcall+0xd5/0x410
do_init_module+0x1c8/0x760
load_module+0x6d8b/0x9650
__do_sys_finit_module+0x118/0x1b0
do_syscall_64+0x2d/0x40
entry_SYSCALL_64_after_hwframe+0x44/0xae
Freed by task 275:
kasan_save_stack+0x1b/0x40
kasan_set_track+0x1c/0x30
kasan_set_free_info+0x20/0x30
__kasan_slab_free+0x102/0x140
slab_free_freelist_hook+0x74/0x1b0
kfree+0xd7/0x2a0
mlx5_unload+0x16/0xb0 [mlx5_core]
mlx5_unload_one+0xae/0x120 [mlx5_core]
mlx5_devlink_reload_down+0x1bc/0x380 [mlx5_core]
devlink_reload+0x141/0x520
devlink_nl_cmd_reload+0x66d/0x1070
genl_family_rcv_msg_doit+0x1e9/0x2f0
genl_rcv_msg+0x27f/0x4a0
netlink_rcv_skb+0x11d/0x340
genl_rcv+0x24/0x40
netlink_unicast+0x433/0x700
netlink_sendmsg+0x6f1/0xbd0
sock_sendmsg+0xb0/0xe0
__sys_sendto+0x193/0x240
__x64_sys_sendto+0xdd/0x1b0
do_syscall_64+0x2d/0x40
entry_SYSCALL_64_after_hwframe+0x44/0xae
The buggy address belongs to the object at ffff888009d04300
which belongs to the cache kmalloc-128 of size 128
The buggy address is located 8 bytes inside of
128-byte region [ffff888009d04300, ffff888009d04380)
The buggy address belongs to the page:
page:0000000086a64ecc refcount:1 mapcount:0 mapping:0000000000000000 index:0xffff888009d04000 pfn:0x9d04
head:0000000086a64ecc order:1 compound_mapcount:0
flags: 0x4000000000010200(slab|head)
raw: 4000000000010200 ffffea0000203980 0000000200000002 ffff8880050428c0
raw: ffff888009d04000 000000008020001d 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffff888009d04200: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
ffff888009d04280: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
>ffff888009d04300: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
^
ffff888009d04380: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
ffff888009d04400: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
==================================================================
The right solution to devlink reload is to notify about deletion of
parameters, unload driver, change net namespaces, load driver and notify
about addition of parameters.
Fixes: 070c63f20f6c ("net: devlink: allow to change namespaces during reload")
Reviewed-by: Parav Pandit <parav@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
---
net/core/devlink.c | 32 ++++++++++++++++++++------------
1 file changed, 20 insertions(+), 12 deletions(-)
diff --git a/net/core/devlink.c b/net/core/devlink.c
index b596a971b473..4385930b896f 100644
--- a/net/core/devlink.c
+++ b/net/core/devlink.c
@@ -3801,8 +3801,9 @@ static void devlink_param_notify(struct devlink *devlink,
struct devlink_param_item *param_item,
enum devlink_command cmd);
-static void devlink_reload_netns_change(struct devlink *devlink,
- struct net *dest_net)
+static void devlink_ns_change_notify(struct devlink *devlink,
+ struct net *dest_net, struct net *curr_net,
+ enum devlink_command cmd, bool new)
{
struct devlink_param_item *param_item;
@@ -3812,17 +3813,17 @@ static void devlink_reload_netns_change(struct devlink *devlink,
* reload process so the notifications are generated separatelly.
*/
- list_for_each_entry(param_item, &devlink->param_list, list)
- devlink_param_notify(devlink, 0, param_item,
- DEVLINK_CMD_PARAM_DEL);
- devlink_notify(devlink, DEVLINK_CMD_DEL);
+ if (!dest_net || net_eq(dest_net, curr_net))
+ return;
- __devlink_net_set(devlink, dest_net);
+ if (new)
+ devlink_notify(devlink, DEVLINK_CMD_NEW);
- devlink_notify(devlink, DEVLINK_CMD_NEW);
list_for_each_entry(param_item, &devlink->param_list, list)
- devlink_param_notify(devlink, 0, param_item,
- DEVLINK_CMD_PARAM_NEW);
+ devlink_param_notify(devlink, 0, param_item, cmd);
+
+ if (!new)
+ devlink_notify(devlink, DEVLINK_CMD_DEL);
}
static bool devlink_reload_supported(const struct devlink_ops *ops)
@@ -3902,6 +3903,7 @@ static int devlink_reload(struct devlink *devlink, struct net *dest_net,
u32 *actions_performed, struct netlink_ext_ack *extack)
{
u32 remote_reload_stats[DEVLINK_RELOAD_STATS_ARRAY_SIZE];
+ struct net *curr_net;
int err;
if (!devlink->reload_enabled)
@@ -3909,18 +3911,24 @@ static int devlink_reload(struct devlink *devlink, struct net *dest_net,
memcpy(remote_reload_stats, devlink->stats.remote_reload_stats,
sizeof(remote_reload_stats));
+
+ curr_net = devlink_net(devlink);
+ devlink_ns_change_notify(devlink, dest_net, curr_net,
+ DEVLINK_CMD_PARAM_DEL, false);
err = devlink->ops->reload_down(devlink, !!dest_net, action, limit, extack);
if (err)
return err;
- if (dest_net && !net_eq(dest_net, devlink_net(devlink)))
- devlink_reload_netns_change(devlink, dest_net);
+ if (dest_net && !net_eq(dest_net, curr_net))
+ __devlink_net_set(devlink, dest_net);
err = devlink->ops->reload_up(devlink, action, limit, actions_performed, extack);
devlink_reload_failed_set(devlink, !!err);
if (err)
return err;
+ devlink_ns_change_notify(devlink, dest_net, curr_net,
+ DEVLINK_CMD_PARAM_NEW, true);
WARN_ON(!(*actions_performed & BIT(action)));
/* Catch driver on updating the remote action within devlink reload */
WARN_ON(memcmp(remote_reload_stats, devlink->stats.remote_reload_stats,
--
2.31.1
next prev parent reply other threads:[~2021-07-29 13:18 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-07-29 13:17 [PATCH net-next v1 0/2] Clean devlink net namespace operations Leon Romanovsky
2021-07-29 13:17 ` Leon Romanovsky [this message]
2021-07-29 14:33 ` [PATCH net-next v1 1/2] devlink: Break parameter notification sequence to be before/after unload/load driver Jiri Pirko
2021-07-29 14:38 ` Leon Romanovsky
2021-07-29 13:17 ` [PATCH net-next v1 2/2] devlink: Allocate devlink directly in requested net namespace Leon Romanovsky
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=a9a61cdee79cbfefa4e4e2cc973fe27a10b7ee4f.1627564383.git.leonro@nvidia.com \
--to=leon@kernel.org \
--cc=davem@davemloft.net \
--cc=jiri@nvidia.com \
--cc=kuba@kernel.org \
--cc=leonro@nvidia.com \
--cc=linux-kernel@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=parav@nvidia.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.