From mboxrd@z Thu Jan 1 00:00:00 1970 From: Stefano Babic Date: Fri, 31 Aug 2018 21:26:38 +0200 Subject: [U-Boot] [PULL] Please pull u-boot-imx In-Reply-To: <20180831130743.GK26633@bill-the-cat> References: <48c52f49-8882-821c-70e5-3dfa34c7722b@denx.de> <20180831130743.GK26633@bill-the-cat> Message-ID: List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable To: u-boot@lists.denx.de On 31/08/2018 15:07, Tom Rini wrote: > On Fri, Aug 31, 2018 at 03:04:31PM +0200, Stefano Babic wrote: >> Hi Tom, >> >> please pull from u-boot-imx, thanks ! >> >> The following changes since commit 11ed312896c5f5814064c5d45dcb2f53dc121= 437: >> >> configs: am57xx: change default board name to beagle_x15 (2018-08-26 >> 12:26:16 -0400) >> >> are available in the Git repository at: >> >> git://www.denx.de/git/u-boot-imx.git master >> >> for you to fetch changes up to 2846e663fd62200a189bba357135e284a379a38b: >> >> imx: missing CONFIG_MII in mx7dsabresd_qspi_defconfig (2018-08-31 >> 12:08:43 +0200) >> >> ---------------------------------------------------------------- >> Alex Kiernan (1): >> Cleanup CONFIG_BOOTDELAY on cl-som-imx7 >> >> Anson Huang (3): >> imx: mx7: psci: improve cpu hotplug flow >> imx: mx7: add gpc initialization for low power mode >> imx: mx7: add system suspend/resume support >> >> Denis Zalevskiy (6): >> board: ge: Remove EEPROM bus param from read_vpd() >> board: ge: Move VPD EEPROM configuration to the defconfig >> bootcount: i2c: Add bus switching to the I2C bootcount driver >> bootcount: Configure length limit for I2C bootcount >> board: ge: Move VPD reading to the vpd_reader >> board: ge: Store bootcount in EEPROM on PPD and Bx50v3 >> >> Martin Kaiser (1): >> watchdog: mx25: use the imx_watchdog driver for mx25 >> >> Stefan Agner (2): >> board: toradex: common: fail gracefully on missing NAND chip >> colibri_imx7_emmc: add Colibri iMX7D 1GB (eMMC) module support >> >> Stefano Babic (2): >> Merge branch 'master' of git://git.denx.de/u-boot into master >> imx: missing CONFIG_MII in mx7dsabresd_qspi_defconfig >> >> S=C3=A9bastien Szymanski (1): >> ARM: opos6ul: make the board boot again >> >> Ye Li (6): >> imx: imx6sx-sdb: Enable DM QSPI driver >> imx: imx6sx-sabreauto: convert to use DM QSPI driver >> imx: imx7d-sdb: Add DM QSPI support >> dts: imx6ul: Update alias to support DM >> dts: imx6ul_evk: Add DTS files for 14x14 EVK and 9x9 EVK boards >> imx: imx6ul_evk: Enable DM driver for iMX6UL EVK u-boot >> >> arch/arm/dts/Makefile | 7 +- >> arch/arm/dts/imx6sx-sabreauto-u-boot.dtsi | 16 + >> arch/arm/dts/imx6sx-sabreauto.dts | 40 ++ >> arch/arm/dts/imx6sx-sdb-u-boot.dtsi | 16 + >> arch/arm/dts/imx6sx.dtsi | 12 +- >> arch/arm/dts/imx6ul-14x14-evk-u-boot.dtsi | 10 + >> arch/arm/dts/imx6ul-14x14-evk.dts | 427 +++++++++++++++= ++++ >> arch/arm/dts/imx6ul-9x9-evk-u-boot.dtsi | 10 + >> arch/arm/dts/imx6ul-9x9-evk.dts | 471 >> +++++++++++++++++++++ >> arch/arm/dts/imx6ul-opos6ul-u-boot.dtsi | 28 ++ >> arch/arm/dts/imx6ul-opos6ul.dtsi | 2 - >> arch/arm/dts/imx6ul-opos6uldev-u-boot.dts | 25 ++ >> arch/arm/dts/imx6ul-opos6uldev.dts | 2 - >> arch/arm/dts/imx6ul.dtsi | 13 +- >> arch/arm/dts/imx7d-sdb-qspi-u-boot.dtsi | 10 + >> arch/arm/dts/imx7d-sdb-qspi.dts | 44 ++ >> arch/arm/dts/imx7d-sdb.dts | 6 +- >> arch/arm/dts/imx7d.dtsi | 12 + >> arch/arm/dts/imx7s.dtsi | 22 +- >> arch/arm/include/asm/arch-mx25/imx-regs.h | 1 + >> arch/arm/mach-imx/mx7/Makefile | 2 +- >> arch/arm/mach-imx/mx7/psci-mx7.c | 472 >> +++++++++++++++++++++- >> arch/arm/mach-imx/mx7/psci-suspend.S | 67 +++ >> arch/arm/mach-imx/mx7/soc.c | 103 +++++ >> board/freescale/mx6sxsabreauto/mx6sxsabreauto.c | 24 -- >> board/freescale/mx6sxsabresd/mx6sxsabresd.c | 25 -- >> board/freescale/mx6ul_14x14_evk/mx6ul_14x14_evk.c | 208 ++-------- >> board/freescale/mx7dsabresd/mx7dsabresd.c | 16 - >> board/ge/bx50v3/Kconfig | 2 + >> board/ge/bx50v3/bx50v3.c | 57 +-- >> board/ge/common/Kconfig | 14 + >> board/ge/common/vpd_reader.c | 57 ++- >> board/ge/common/vpd_reader.h | 16 +- >> board/ge/mx53ppd/Kconfig | 2 + >> board/ge/mx53ppd/mx53ppd.c | 50 +-- >> board/toradex/colibri_imx7/Kconfig | 42 +- >> board/toradex/colibri_imx7/MAINTAINERS | 4 + >> board/toradex/colibri_imx7/colibri_imx7.c | 41 +- >> board/toradex/common/tdx-cfg-block.c | 7 +- >> configs/ge_bx50v3_defconfig | 27 +- >> configs/mx53ppd_defconfig | 29 +- >> configs/mx6sxsabreauto_defconfig | 2 + >> configs/mx6sxsabresd_defconfig | 7 + >> configs/mx6ul_14x14_evk_defconfig | 17 +- >> configs/mx6ul_9x9_evk_defconfig | 20 +- >> configs/mx7dsabresd_qspi_defconfig | 84 ++++ >> configs/opos6uldev_defconfig | 2 +- >> drivers/bootcount/Kconfig | 21 +- >> drivers/bootcount/bootcount_i2c.c | 78 +++- >> drivers/watchdog/Makefile | 2 +- >> include/configs/cl-som-imx7.h | 2 - >> include/configs/colibri_imx7.h | 90 ++++- >> include/configs/ge_bx50v3.h | 6 +- >> include/configs/mx53ppd.h | 6 +- >> include/configs/mx6sxsabresd.h | 4 + >> include/configs/mx6ul_14x14_evk.h | 13 +- >> include/configs/mx7dsabresd.h | 4 +- >> 57 files changed, 2376 insertions(+), 421 deletions(-) >=20 > This is a lot. I know I should have tagged -rc3 this past Monday, but > forgot (and so, yeah, I need to get back into my habit of calendar > reminders), but still, the release is 10 days away. It looks like > there's a lot of new stuff in here too, not just clean-ups. Are you > sure this is all appropriate at this stage? Thanks! Several of them are fixes and I got reminder for the submitter to psuh them from the releases. These are from Anson and Stefan. I merged Ye's patches sometime ago, but I have not sent any PR after that.Sebastien's partch is a fix, too, and I merge GE's board because patches are quite old, ready to be merged and related just to the GE boards. I had to fix a broken board after merging, so my is also a fix. So yes, I think they are fixes for the release. It is just that I picked modt of them quite late because I had no time to do this before. Thanks, Stefano --=20 =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D