All of lore.kernel.org
 help / color / mirror / Atom feed
From: Jyri Sarha <jsarha@ti.com>
To: dri-devel@lists.freedesktop.org
Cc: Liviu.Dudau@arm.com, Jyri Sarha <jsarha@ti.com>,
	tomi.valkeinen@ti.com, laurent.pinchart@ideasonboard.com
Subject: [PATCH RFC 4/6] drm/omap: cleanup color space conversion
Date: Fri, 21 Apr 2017 12:51:15 +0300	[thread overview]
Message-ID: <aa2fb5c8681d87c489ebc471afd5e60133d8bbbb.1492768073.git.jsarha@ti.com> (raw)
In-Reply-To: <cover.1492768073.git.jsarha@ti.com>

From: Tomi Valkeinen <tomi.valkeinen@ti.com>

The setup code for color space conversion is a bit messy. This patch
cleans it up.

For some reason the TRM uses values in YCrCb order, which is also used
in the current driver, whereas everywhere else it's YCbCr (which also
matches YUV order). This patch changes the tables to use the common
order to avoid confusion.

The tables are split into separate lines, and comments added for
clarity.

WB color conversion registers are similar but different than non-WB, but
the same function was used to write both. It worked fine because the
coef table was adjusted accordingly, but that was rather confusing. This
patch adds a separate function to write the WB values so that the coef
table can be written in an understandable way.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Jyri Sarha <jsarha@ti.com>
---
 drivers/gpu/drm/omapdrm/dss/dispc.c | 59 +++++++++++++++++++++++++++----------
 1 file changed, 44 insertions(+), 15 deletions(-)

diff --git a/drivers/gpu/drm/omapdrm/dss/dispc.c b/drivers/gpu/drm/omapdrm/dss/dispc.c
index 5ac0145..b53e63d 100644
--- a/drivers/gpu/drm/omapdrm/dss/dispc.c
+++ b/drivers/gpu/drm/omapdrm/dss/dispc.c
@@ -293,11 +293,6 @@ struct dispc_gamma_desc {
 	},
 };
 
-struct color_conv_coef {
-	int ry, rcr, rcb, gy, gcr, gcb, by, bcr, bcb;
-	int full_range;
-};
-
 static unsigned long dispc_fclk_rate(void);
 static unsigned long dispc_core_clk_rate(void);
 static unsigned long dispc_mgr_lclk_rate(enum omap_channel channel);
@@ -757,9 +752,18 @@ static void dispc_ovl_set_scale_coef(enum omap_plane_id plane, int fir_hinc,
 	}
 }
 
+struct csc_coef_yuv2rgb {
+	int ry, rcb, rcr, gy, gcb, gcr, by, bcb, bcr;
+	bool full_range;
+};
+
+struct csc_coef_rgb2yuv {
+	int yr, yg, yb, cbr, cbg, cbb, crr, crg, crb;
+	bool full_range;
+};
 
 static void dispc_ovl_write_color_conv_coef(enum omap_plane_id plane,
-		const struct color_conv_coef *ct)
+		const struct csc_coef_yuv2rgb *ct)
 {
 #define CVAL(x, y) (FLD_VAL(x, 26, 16) | FLD_VAL(y, 10, 0))
 
@@ -769,7 +773,24 @@ static void dispc_ovl_write_color_conv_coef(enum omap_plane_id plane,
 	dispc_write_reg(DISPC_OVL_CONV_COEF(plane, 3), CVAL(ct->bcr, ct->by));
 	dispc_write_reg(DISPC_OVL_CONV_COEF(plane, 4), CVAL(0, ct->bcb));
 
-	REG_FLD_MOD(DISPC_OVL_ATTRIBUTES(plane), ct->full_range, 11, 11);
+	REG_FLD_MOD(DISPC_OVL_ATTRIBUTES(plane), !!ct->full_range, 11, 11);
+
+#undef CVAL
+}
+
+static void dispc_wb_write_color_conv_coef(const struct csc_coef_rgb2yuv *ct)
+{
+	const enum omap_plane_id plane = OMAP_DSS_WB;
+
+#define CVAL(x, y) (FLD_VAL(x, 26, 16) | FLD_VAL(y, 10, 0))
+
+	dispc_write_reg(DISPC_OVL_CONV_COEF(plane, 0), CVAL(ct->yg,  ct->yr));
+	dispc_write_reg(DISPC_OVL_CONV_COEF(plane, 1), CVAL(ct->crr, ct->yb));
+	dispc_write_reg(DISPC_OVL_CONV_COEF(plane, 2), CVAL(ct->crb, ct->crg));
+	dispc_write_reg(DISPC_OVL_CONV_COEF(plane, 3), CVAL(ct->cbg, ct->cbr));
+	dispc_write_reg(DISPC_OVL_CONV_COEF(plane, 4), CVAL(0, ct->cbb));
+
+	REG_FLD_MOD(DISPC_OVL_ATTRIBUTES(plane), !!ct->full_range, 11, 11);
 
 #undef CVAL
 }
@@ -778,20 +799,28 @@ static void dispc_setup_color_conv_coef(void)
 {
 	int i;
 	int num_ovl = dss_feat_get_num_ovls();
-	const struct color_conv_coef ctbl_bt601_5_ovl = {
-		/* YUV -> RGB */
-		298, 409, 0, 298, -208, -100, 298, 0, 517, 0,
+
+	/* YUV -> RGB, ITU-R BT.601, limited range */
+	const struct csc_coef_yuv2rgb coefs_yuv2rgb_bt601_lim = {
+		298,    0,  409,	/* ry, rcb, rcr */
+		298, -100, -208,	/* gy, gcb, gcr */
+		298,  516,    0,	/* by, bcb, bcr */
+		false,			/* limited range */
 	};
-	const struct color_conv_coef ctbl_bt601_5_wb = {
-		/* RGB -> YUV */
-		66, 129, 25, 112, -94, -18, -38, -74, 112, 0,
+
+	/* RGB -> YUV, ITU-R BT.601, limited range */
+	const struct csc_coef_rgb2yuv coefs_rgb2yuv_bt601_lim = {
+		 66, 129,  25,		/* yr,   yg,  yb */
+		-38, -74, 112,		/* cbr, cbg, cbb */
+		112, -94, -18,		/* crr, crg, crb */
+		false,			/* limited range */
 	};
 
 	for (i = 1; i < num_ovl; i++)
-		dispc_ovl_write_color_conv_coef(i, &ctbl_bt601_5_ovl);
+		dispc_ovl_write_color_conv_coef(i, &coefs_yuv2rgb_bt601_lim);
 
 	if (dispc.feat->has_writeback)
-		dispc_ovl_write_color_conv_coef(OMAP_DSS_WB, &ctbl_bt601_5_wb);
+		dispc_wb_write_color_conv_coef(&coefs_rgb2yuv_bt601_lim);
 }
 
 static void dispc_ovl_set_ba0(enum omap_plane_id plane, u32 paddr)
-- 
1.9.1

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

  parent reply	other threads:[~2017-04-21  9:52 UTC|newest]

Thread overview: 36+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-04-21  9:51 [PATCH RFC 0/6] drm: Add properties to control YCbCr to RGB conversion Jyri Sarha
2017-04-21  9:51 ` [PATCH RFC 1/6] drm: drm_color_mgmt.h needs struct drm_crtc declaration Jyri Sarha
2017-04-21 11:46   ` Laurent Pinchart
2017-04-21  9:51 ` [PATCH RFC 2/6] drm: Make drm_atomic_replace_property_blob_from_id() more generic Jyri Sarha
2017-04-21 11:47   ` Laurent Pinchart
2017-05-02  8:31     ` Daniel Vetter
2017-04-21  9:51 ` [PATCH RFC 3/6] drm: Plane YCbCr to RGB conversion related properties Jyri Sarha
2017-04-21 11:17   ` Ville Syrjälä
2017-04-21 12:10     ` Laurent Pinchart
2017-04-21 13:08       ` Ville Syrjälä
2017-04-21 12:58     ` Sharma, Shashank
2017-04-21 13:39     ` Jyri Sarha
2017-04-21 13:52       ` Ville Syrjälä
2017-04-21 14:53         ` Brian Starkey
2017-04-21 15:21           ` Ville Syrjälä
2017-04-21 15:34             ` Brian Starkey
2017-04-21 16:49               ` Ville Syrjälä
2017-04-24 12:58                 ` Brian Starkey
2017-04-24  9:02         ` [PATCH] RFC: Design: DRM: Blending pipeline using DRM plane properties Shashank Sharma
2017-04-24 13:21         ` [PATCH RFC 3/6] drm: Plane YCbCr to RGB conversion related properties Jyri Sarha
2017-04-24 15:13           ` Ville Syrjälä
2017-04-24 15:49             ` Jyri Sarha
2017-04-24 16:55               ` Ville Syrjälä
2017-04-26 12:56                 ` Jyri Sarha
2017-04-26 13:28                   ` Sharma, Shashank
2017-04-26 17:22                   ` Ville Syrjälä
2017-05-02  8:33   ` Daniel Vetter
2017-05-02  9:29     ` Jyri Sarha
2017-04-21  9:51 ` Jyri Sarha [this message]
2017-04-21 11:53   ` [PATCH RFC 4/6] drm/omap: cleanup color space conversion Laurent Pinchart
2017-04-21  9:51 ` [PATCH RFC 5/6] drm/omap: csc full range support Jyri Sarha
2017-04-21 11:55   ` Laurent Pinchart
2017-04-21  9:51 ` [PATCH RFC 6/6] drm/omap: Enable ycbcr_to_rgb_properties for omapdrm planes REVISIT Jyri Sarha
2017-04-21 12:53 ` [PATCH RFC 0/6] drm: Add properties to control YCbCr to RGB conversion Sharma, Shashank
2017-04-21 13:50 ` Liviu Dudau
2017-04-24  9:18 ` ✓ Fi.CI.BAT: success for RFC: Design: DRM: Blending pipeline using DRM plane properties Patchwork

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=aa2fb5c8681d87c489ebc471afd5e60133d8bbbb.1492768073.git.jsarha@ti.com \
    --to=jsarha@ti.com \
    --cc=Liviu.Dudau@arm.com \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=laurent.pinchart@ideasonboard.com \
    --cc=tomi.valkeinen@ti.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.