From mboxrd@z Thu Jan 1 00:00:00 1970 From: Patrice CHOTARD Date: Wed, 21 Oct 2020 12:33:21 +0000 Subject: [PATCH 22/33] i2c: stm32f7_i2c: migrate trace to dev and log macro In-Reply-To: <20201014091646.4233-23-patrick.delaunay@st.com> References: <20201014091646.4233-1-patrick.delaunay@st.com> <20201014091646.4233-23-patrick.delaunay@st.com> Message-ID: List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Hi Patrick On 10/14/20 11:16 AM, Patrick Delaunay wrote: > Change debug to dev_dbg macro and define LOG_CATEGORY. > > Remove the "%s:" __func__ header as it is managed by dev macro > (dev->name is displayed) or log macro (CONFIG_LOGF_FUNC). > > Signed-off-by: Patrick Delaunay > --- > > drivers/i2c/stm32f7_i2c.c | 74 +++++++++++++++++++-------------------- > 1 file changed, 37 insertions(+), 37 deletions(-) > > diff --git a/drivers/i2c/stm32f7_i2c.c b/drivers/i2c/stm32f7_i2c.c > index 2f60911549..a407cc02ab 100644 > --- a/drivers/i2c/stm32f7_i2c.c > +++ b/drivers/i2c/stm32f7_i2c.c > @@ -3,6 +3,8 @@ > * (C) Copyright 2017 STMicroelectronics > */ > > +#define LOG_CATEGORY UCLASS_I2C > + > #include > #include > #include > @@ -11,10 +13,10 @@ > #include > #include > #include > +#include > +#include > #include > #include > - > -#include > #include > #include > > @@ -346,7 +348,7 @@ static int stm32_i2c_wait_flags(struct stm32_i2c_priv *i2c_priv, > *status = readl(®s->isr); > while (!(*status & flags)) { > if (get_timer(time_start) > CONFIG_SYS_HZ) { > - debug("%s: i2c timeout\n", __func__); > + log_debug("i2c timeout\n"); > return -ETIMEDOUT; > } > > @@ -369,7 +371,7 @@ static int stm32_i2c_check_end_of_message(struct stm32_i2c_priv *i2c_priv) > return ret; > > if (status & STM32_I2C_ISR_BERR) { > - debug("%s: Bus error\n", __func__); > + log_debug("Bus error\n"); > > /* Clear BERR flag */ > setbits_le32(®s->icr, STM32_I2C_ICR_BERRCF); > @@ -378,7 +380,7 @@ static int stm32_i2c_check_end_of_message(struct stm32_i2c_priv *i2c_priv) > } > > if (status & STM32_I2C_ISR_ARLO) { > - debug("%s: Arbitration lost\n", __func__); > + log_debug("Arbitration lost\n"); > > /* Clear ARLO flag */ > setbits_le32(®s->icr, STM32_I2C_ICR_ARLOCF); > @@ -387,7 +389,7 @@ static int stm32_i2c_check_end_of_message(struct stm32_i2c_priv *i2c_priv) > } > > if (status & STM32_I2C_ISR_NACKF) { > - debug("%s: Receive NACK\n", __func__); > + log_debug("Receive NACK\n"); > > /* Clear NACK flag */ > setbits_le32(®s->icr, STM32_I2C_ICR_NACKCF); > @@ -535,8 +537,8 @@ static int stm32_i2c_compute_solutions(struct stm32_i2c_setup *setup, > if (sdadel_max < 0) > sdadel_max = 0; > > - debug("%s: SDADEL(min/max): %i/%i, SCLDEL(Min): %i\n", __func__, > - sdadel_min, sdadel_max, scldel_min); > + log_debug("SDADEL(min/max): %i/%i, SCLDEL(Min): %i\n", > + sdadel_min, sdadel_max, scldel_min); > > /* Compute possible values for PRESC, SCLDEL and SDADEL */ > for (p = 0; p < STM32_PRESC_MAX; p++) { > @@ -572,7 +574,7 @@ static int stm32_i2c_compute_solutions(struct stm32_i2c_setup *setup, > } > > if (list_empty(solutions)) { > - pr_err("%s: no Prescaler solution\n", __func__); > + log_err("no Prescaler solution\n"); > ret = -EPERM; > } > > @@ -656,7 +658,7 @@ static int stm32_i2c_choose_solution(struct stm32_i2c_setup *setup, > } > > if (!sol_found) { > - pr_err("%s: no solution at all\n", __func__); > + log_err("no solution at all\n"); > ret = -EPERM; > } > > @@ -686,23 +688,22 @@ static int stm32_i2c_compute_timing(struct stm32_i2c_priv *i2c_priv, > > specs = get_specs(setup->speed_freq); > if (specs == ERR_PTR(-EINVAL)) { > - pr_err("%s: speed out of bound {%d}\n", __func__, > - setup->speed_freq); > + log_err("speed out of bound {%d}\n", > + setup->speed_freq); > return -EINVAL; > } > > if (setup->rise_time > specs->rise_max || > setup->fall_time > specs->fall_max) { > - pr_err("%s :timings out of bound Rise{%d>%d}/Fall{%d>%d}\n", > - __func__, > - setup->rise_time, specs->rise_max, > - setup->fall_time, specs->fall_max); > + log_err("timings out of bound Rise{%d>%d}/Fall{%d>%d}\n", > + setup->rise_time, specs->rise_max, > + setup->fall_time, specs->fall_max); > return -EINVAL; > } > > if (setup->dnf > STM32_I2C_DNF_MAX) { > - pr_err("%s: DNF out of bound %d/%d\n", __func__, > - setup->dnf, STM32_I2C_DNF_MAX); > + log_err("DNF out of bound %d/%d\n", > + setup->dnf, STM32_I2C_DNF_MAX); > return -EINVAL; > } > > @@ -715,10 +716,10 @@ static int stm32_i2c_compute_timing(struct stm32_i2c_priv *i2c_priv, > if (ret) > goto exit; > > - debug("%s: Presc: %i, scldel: %i, sdadel: %i, scll: %i, sclh: %i\n", > - __func__, output->presc, > - output->scldel, output->sdadel, > - output->scll, output->sclh); > + log_debug("Presc: %i, scldel: %i, sdadel: %i, scll: %i, sclh: %i\n", > + output->presc, > + output->scldel, output->sdadel, > + output->scll, output->sclh); > > exit: > /* Release list and memory */ > @@ -751,20 +752,19 @@ static int stm32_i2c_setup_timing(struct stm32_i2c_priv *i2c_priv, > setup->clock_src = clk_get_rate(&i2c_priv->clk); > > if (!setup->clock_src) { > - pr_err("%s: clock rate is 0\n", __func__); > + log_err("clock rate is 0\n"); > return -EINVAL; > } > > do { > ret = stm32_i2c_compute_timing(i2c_priv, setup, timing); > if (ret) { > - debug("%s: failed to compute I2C timings.\n", > - __func__); > + log_debug("failed to compute I2C timings.\n"); > if (setup->speed_freq > I2C_SPEED_STANDARD_RATE) { > setup->speed_freq = > get_lower_rate(setup->speed_freq); > - debug("%s: downgrade I2C Speed Freq to (%i)\n", > - __func__, setup->speed_freq); > + log_debug("downgrade I2C Speed Freq to (%i)\n", > + setup->speed_freq); > } else { > break; > } > @@ -772,16 +772,16 @@ static int stm32_i2c_setup_timing(struct stm32_i2c_priv *i2c_priv, > } while (ret); > > if (ret) { > - pr_err("%s: impossible to compute I2C timings.\n", __func__); > + log_err("impossible to compute I2C timings.\n"); > return ret; > } > > - debug("%s: I2C Freq(%i), Clk Source(%i)\n", __func__, > - setup->speed_freq, setup->clock_src); > - debug("%s: I2C Rise(%i) and Fall(%i) Time\n", __func__, > - setup->rise_time, setup->fall_time); > - debug("%s: I2C Analog Filter(%s), DNF(%i)\n", __func__, > - setup->analog_filter ? "On" : "Off", setup->dnf); > + log_debug("I2C Freq(%i), Clk Source(%i)\n", > + setup->speed_freq, setup->clock_src); > + log_debug("I2C Rise(%i) and Fall(%i) Time\n", > + setup->rise_time, setup->fall_time); > + log_debug("I2C Analog Filter(%s), DNF(%i)\n", > + setup->analog_filter ? "On" : "Off", setup->dnf); > > i2c_priv->speed = setup->speed_freq; > > @@ -848,12 +848,12 @@ static int stm32_i2c_hw_config(struct stm32_i2c_priv *i2c_priv) > return 0; > } > > -static int stm32_i2c_set_bus_speed(struct udevice *bus, unsigned int speed) > +static int stm32_i2c_set_bus_speed(struct udevice *dev, unsigned int speed) > { > - struct stm32_i2c_priv *i2c_priv = dev_get_priv(bus); > + struct stm32_i2c_priv *i2c_priv = dev_get_priv(dev); > > if (speed > I2C_SPEED_FAST_PLUS_RATE) { > - debug("%s: Speed %d not supported\n", __func__, speed); > + dev_dbg(dev, "Speed %d not supported\n", speed); > return -EINVAL; > } > Reviewed-by: Patrice Chotard Thanks