From mboxrd@z Thu Jan 1 00:00:00 1970 From: Stefano Babic Date: Mon, 25 Mar 2019 13:14:36 +0100 Subject: [U-Boot] [U-Boot, v1, 26/26] board: colibri_imx6: check for and report ecc errors in fuses In-Reply-To: References: <20190208174229.23562-27-marcel@ziswiler.com> <20190313094323.6DE7AC21FF9@lists.denx.de> Message-ID: List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On 24/03/19 22:42, Marcel Ziswiler wrote: > Hi Stefano > > On Wed, 2019-03-13 at 09:38 +0000, sbabic at denx.de wrote: >>> From: Gerard Salvatella >>> The PMIC on the Colibri iMX6 may have ECC errors in fuses that will >>> prevent correct settings. Up to one bit error per fuse bank can be >>> reported and corrected by the ECC logic. Two bit errors can only be >>> reported. >>> Signed-off-by: Gerard Salvatella >>> Acked-by: Marcel Ziswiler >> >> Applied to u-boot-imx, -next, thanks ! > > Unfortunately, I can't find that one anywhere on u-boot-imx.git/next. > > I will resend it as a separate patch for you to pick up, OK? mmhhh...I have applied them, I see in my local -next, I am sure I pushed before. Let me see why they do not appear on git.denx.de, you do not need to repush, they are alreay applied. > > BTW: I will also send a V2 of the Colibri Vybrid stuff, plus the > Colibri iMX6ULL overhaul and the initial add of the Colibri iMX8QXP. Ok, thanks for info. I set V1 as obsolete in patchwork. Regards, Stefano > >> Best regards, >> Stefano Babic > > Cheers > > Marcel > -- ===================================================================== DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de =====================================================================