Hi,

This is a set of board.bin files for the ZyXEL WRE6606 Router [0],
which I wish to be added to the ath10k-firmware repository.


As per the current "Submitting board files" guidelines [1]:

* description for what hardware this is:

   - it is a IPQ4018 based board [0]
   - one QCA40xx radio is used as 2.4GHz radio
   - one QCA40xx radio is used as 5GHz radio

* origin of the board file (did you create it yourself or where you
   downloaded)

   - All files were extracted from official vendor firmware which was on 
the device from the factory
   - Boardfiles also included in the vendor firmware image of the NBG6617

* ids to be used with the board file (ATH10K_BD_IE_BOARD_NAME in ath10k)
   - qca4019 hw1.0
     + bus=ahb,bmi-chip-id=0,bmi-board-id=24,variant=ZyXEL-WRE6606

     + bus=ahb,bmi-chip-id=0,bmi-board-id=25,variant=ZyXEL-WRE6606

* sha256sum of each new board file to add
    - bus=ahb,bmi-chip-id=0,bmi-board-id=24,variant=ZyXEL-WRE6606
      has sha256sum: 
1aeae4981217b63883e20ecbab6380aff404985485bf1e881fb0fc874f2a0883

    - bus=ahb,bmi-chip-id=0,bmi-board-id=25,variant=ZyXEL-WRE6606
      has sha256sum: 
469e81fd2593cba442c0d810ce92309bb92eaa42bbddbbbf4ec051fabd345ecf

* attach the actual board file (board.bin)

   - The name of the files are equal to the id string in the board-2.bin
     (minus the ".bin")

Kind regards,
Magnus

[0] <https://wikidevi.com/wiki/ZyXEL_WRE6606>

[1] <https://wireless.wiki.kernel.org/en/users/drivers/ath10k/boardfiles>