From: Stefan Roese <sr@denx.de>
To: u-boot@lists.denx.de
Subject: [U-Boot] Please pull u-boot-marvell/master
Date: Tue, 5 Jun 2018 11:33:03 +0200 [thread overview]
Message-ID: <ac3d26ae-7a44-cfe1-85cf-584e9ad47364@denx.de> (raw)
Hi Tom,
please pull the last batch of Marvell patches for this release
(bug fixes might still be coming).
I've run checkpatch as requested and only noticed warnings that
I feel should be ignored (>80 chars etc).
Thanks,
Stefan
The following changes since commit ee1855dc52fc366f33e21182103323c236cb3346:
Prepare v2018.07-rc1 (2018-06-04 18:08:45 -0400)
are available in the Git repository at:
git://www.denx.de/git/u-boot-marvell.git
for you to fetch changes up to d4899b0f5ddf39de47bd952ca8484a14f03d00fe:
ARM: kirkwood: Enforce size limit for guruplug (2018-06-05 07:29:09 +0200)
----------------------------------------------------------------
Chris Packham (5):
ARM: kirkwood: remove automatic I2C config if DM_I2C is enabled
ARM: add SBx81LIFKW board
ARM: kirkwood: SBx81LIFKW: Enable network hardware
ARM: kirkwood: Enforce size limit for sheevaplug
ARM: kirkwood: Enforce size limit for guruplug
Jon Nettleton (2):
arm: mvebu: enable sata support for clearfog
arm: mvebu: switch clearfog to use device-tree i2c and gpio
Michael Walle (2):
enable CONFIG_DISTRO_DEFAULTS for LS-CHLv2 board
arm: kirkwood: lsxl: Add SPI driver model support
Rabeeh Khoury (1):
mvebu: a38x: Force receiver detected on PCIe lanes
Vagrant Cascadian (1):
Enable thumb build to reduce build size of u-boot.kwb.
arch/arm/dts/armada-388-clearfog.dts | 2 +
arch/arm/dts/kirkwood-atl-sbx81lifkw.dts | 133 ++++++++++++++
arch/arm/dts/kirkwood-lsxl.dtsi | 4 +
arch/arm/mach-kirkwood/Kconfig | 4 +
arch/arm/mach-kirkwood/include/mach/config.h | 3 +-
.../mach-mvebu/serdes/a38x/high_speed_env_spec.c | 2 +
arch/arm/mach-mvebu/serdes/a38x/sys_env_lib.h | 1 +
board/alliedtelesis/SBx81LIFKW/Kconfig | 12 ++
board/alliedtelesis/SBx81LIFKW/MAINTAINERS | 7 +
board/alliedtelesis/SBx81LIFKW/Makefile | 7 +
board/alliedtelesis/SBx81LIFKW/kwbimage.cfg | 47 +++++
board/alliedtelesis/SBx81LIFKW/sbx81lifkw.c | 197 +++++++++++++++++++++
board/solidrun/clearfog/clearfog.c | 22 ---
configs/SBx81LIFKW_defconfig | 39 ++++
configs/clearfog_defconfig | 8 +
configs/lschlv2_defconfig | 18 +-
configs/lsxhl_defconfig | 3 +
configs/sheevaplug_defconfig | 1 +
include/configs/SBx81LIFKW.h | 119 +++++++++++++
include/configs/clearfog.h | 16 +-
include/configs/guruplug.h | 5 +
include/configs/sheevaplug.h | 5 +
22 files changed, 612 insertions(+), 43 deletions(-)
create mode 100644 arch/arm/dts/kirkwood-atl-sbx81lifkw.dts
create mode 100644 board/alliedtelesis/SBx81LIFKW/Kconfig
create mode 100644 board/alliedtelesis/SBx81LIFKW/MAINTAINERS
create mode 100644 board/alliedtelesis/SBx81LIFKW/Makefile
create mode 100644 board/alliedtelesis/SBx81LIFKW/kwbimage.cfg
create mode 100644 board/alliedtelesis/SBx81LIFKW/sbx81lifkw.c
create mode 100644 configs/SBx81LIFKW_defconfig
create mode 100644 include/configs/SBx81LIFKW.h
next reply other threads:[~2018-06-05 9:33 UTC|newest]
Thread overview: 130+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-06-05 9:33 Stefan Roese [this message]
2018-06-05 14:14 ` [U-Boot] Please pull u-boot-marvell/master Tom Rini
-- strict thread matches above, loose matches on Subject: below --
2019-11-14 7:39 Stefan Roese
2019-11-18 2:14 ` Tom Rini
2019-08-12 12:08 Stefan Roese
2019-08-13 16:50 ` Tom Rini
2019-07-11 16:01 Stefan Roese
2019-07-12 13:32 ` Tom Rini
2019-06-04 6:39 Stefan Roese
2019-06-05 14:24 ` Tom Rini
2019-05-27 11:35 Stefan Roese
2019-05-27 18:35 ` Tom Rini
2019-05-20 7:59 Stefan Roese
2019-05-20 17:53 ` Tom Rini
2019-05-09 10:08 Stefan Roese
2019-05-09 22:25 ` Tom Rini
2019-05-03 11:49 Stefan Roese
2019-05-04 17:01 ` Tom Rini
2019-04-26 10:58 Stefan Roese
2019-04-27 14:48 ` Tom Rini
2019-04-11 12:34 Stefan Roese
2019-04-11 14:49 ` Tom Rini
2019-04-11 14:51 ` Stefan Roese
2019-04-11 14:52 ` Tom Rini
2019-03-19 12:49 Stefan Roese
2019-03-20 13:46 ` Tom Rini
2019-02-11 12:34 Stefan Roese
2019-02-11 22:41 ` Tom Rini
2019-02-05 13:36 Stefan Roese
2019-02-08 3:13 ` Tom Rini
2019-01-21 10:52 Stefan Roese
2019-01-22 2:29 ` Tom Rini
2018-12-21 15:31 Stefan Roese
2018-12-23 17:31 ` Tom Rini
2018-12-09 10:15 Stefan Roese
2018-12-09 21:44 ` Chris Packham
2018-12-09 22:11 ` Tom Rini
2018-11-30 14:45 Stefan Roese
2018-11-30 22:09 ` Tom Rini
2018-11-20 12:15 Stefan Roese
2018-11-20 21:48 ` Tom Rini
2018-09-19 15:12 Stefan Roese
2018-09-20 13:24 ` Tom Rini
2018-08-07 13:10 Stefan Roese
2018-08-08 1:35 ` Tom Rini
2018-05-16 12:05 Stefan Roese
2018-05-16 15:37 ` Tom Rini
2018-05-17 8:36 ` Chris Packham
2018-05-17 8:45 ` Chris Packham
2018-05-17 8:48 ` Stefan Roese
2018-05-17 9:06 ` Chris Packham
2018-05-14 11:58 Stefan Roese
2018-05-14 15:11 ` Tom Rini
2018-05-14 15:16 ` Stefan Roese
2018-05-15 1:23 ` Chris Packham
2018-04-17 8:53 Stefan Roese
2018-04-17 19:39 ` Tom Rini
2018-01-29 12:42 Stefan Roese
2018-01-29 16:55 ` Tom Rini
2018-01-20 9:01 Stefan Roese
2018-01-20 16:58 ` Tom Rini
2018-01-10 11:40 Stefan Roese
2018-01-10 16:42 ` Tom Rini
2017-11-30 12:33 Stefan Roese
2017-11-30 18:45 ` Tom Rini
2017-11-16 13:09 Stefan Roese
2017-11-17 1:52 ` Tom Rini
2017-09-26 8:55 Stefan Roese
2017-09-27 2:45 ` Tom Rini
2017-08-30 8:06 Stefan Roese
2017-09-01 16:42 ` Tom Rini
2017-08-21 9:43 Stefan Roese
2017-08-22 20:53 ` Tom Rini
2017-08-10 8:26 Stefan Roese
2017-08-10 20:17 ` Tom Rini
2017-08-08 12:26 Stefan Roese
2017-08-09 15:26 ` Tom Rini
2017-07-12 6:00 Stefan Roese
2017-07-12 14:25 ` Tom Rini
2017-06-23 8:42 Stefan Roese
2017-06-23 13:22 ` Tom Rini
2017-05-31 9:02 Stefan Roese
2017-06-01 12:10 ` Tom Rini
2017-05-09 14:45 Stefan Roese
2017-05-09 23:49 ` Tom Rini
2017-03-29 9:24 Stefan Roese
2017-04-04 20:00 ` Tom Rini
2017-03-24 5:58 Stefan Roese
2017-03-24 17:36 ` Tom Rini
2017-02-17 11:15 Stefan Roese
2017-02-17 22:56 ` Tom Rini
2017-02-01 11:46 Stefan Roese
2017-02-01 21:33 ` Tom Rini
2017-01-25 7:46 Stefan Roese
2017-01-27 1:43 ` Tom Rini
2016-12-21 9:56 Stefan Roese
2016-12-21 13:06 ` Tom Rini
2016-12-12 10:47 Stefan Roese
2016-12-12 15:56 ` Tom Rini
2016-12-05 13:01 Stefan Roese
2016-12-05 16:01 ` Tom Rini
2016-12-01 12:57 Stefan Roese
2016-12-01 18:16 ` Tom Rini
2016-10-09 9:05 Stefan Roese
2016-10-13 0:48 ` Tom Rini
2016-09-27 15:33 Stefan Roese
2016-09-27 21:32 ` Tom Rini
2016-09-24 8:13 Stefan Roese
2016-09-24 16:04 ` Tom Rini
2016-08-26 6:46 Stefan Roese
2016-08-26 14:52 ` Tom Rini
2016-05-31 6:08 Stefan Roese
2016-05-31 14:50 ` Tom Rini
2016-05-20 9:10 Stefan Roese
2016-05-23 22:12 ` Tom Rini
2016-04-12 9:19 Stefan Roese
2016-04-12 17:23 ` Tom Rini
2016-04-12 17:23 ` Tom Rini
2016-04-06 13:47 Stefan Roese
2016-04-06 14:47 ` Tom Rini
2016-04-04 12:07 Stefan Roese
2016-04-05 0:01 ` Tom Rini
2016-03-24 10:09 Stefan Roese
2016-03-25 22:59 ` Tom Rini
2016-03-14 22:37 Luka Perkov
2016-03-15 11:52 ` Tom Rini
2016-01-27 6:58 Stefan Roese
2016-01-28 23:18 ` Tom Rini
2016-01-14 13:28 Stefan Roese
2016-01-14 18:04 ` Tom Rini
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=ac3d26ae-7a44-cfe1-85cf-584e9ad47364@denx.de \
--to=sr@denx.de \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.