From mboxrd@z Thu Jan 1 00:00:00 1970 From: Patrick DELAUNAY Date: Fri, 28 Feb 2020 13:49:03 +0000 Subject: [PATCH 1/1] doc: fix references to driver-model In-Reply-To: <20200225203539.10758-1-xypron.glpk@gmx.de> References: <20200225203539.10758-1-xypron.glpk@gmx.de> Message-ID: List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Hi Heinrich > From: U-Boot On Behalf Of Heinrich Schuchardt > Sent: mardi 25 f?vrier 2020 21:36 > > Fix some errors pointed out by 'make refcheckdocs'. > > Signed-off-by: Heinrich Schuchardt > --- I found also the same issue in -------------------------------- doc/README.SPL -------------------------------- index 4e3478a13a..929b9672b0 100644 @@ -81,7 +81,7 @@ fdtgrep is also used to remove: ('u-boot,dm-pre-reloc', 'u-boot,dm-spl' and 'u-boot,dm-tpl') All the nodes remaining in the SPL devicetree are bound -(see driver-model/README.txt). +(see driver-model/design.rst). Debugging --------- > doc/README.drivers.eth | 2 +- > doc/README.fdt-control | 2 +- > drivers/i2c/davinci_i2c.c | 2 +- > drivers/i2c/kona_i2c.c | 2 +- > drivers/i2c/sh_i2c.c | 2 +- > drivers/i2c/soft_i2c.c | 2 +- > tools/dtoc/dtb_platdata.py | 4 ++-- > tools/dtoc/dtoc.py | 2 +- > 8 files changed, 9 insertions(+), 9 deletions(-) > > diff --git a/doc/README.drivers.eth b/doc/README.drivers.eth index > 1a9a23b51b..acaf11fea3 100644 > --- a/doc/README.drivers.eth > +++ b/doc/README.drivers.eth > @@ -2,7 +2,7 @@ > > This guide describes to the old way of doing things. No new Ethernet drivers > should be implemented this way. All new drivers should be written against the -U- > Boot core driver model. See doc/driver-model/README.txt > +U-Boot core driver model. See doc/driver-model/index.rst. index.rst or design.rst as in the next file ? doc/driver-model/README.txt is replaced by design.rst in commit ed205e677b6f ('doc: driver-model: Convert README.txt to rest') > ----------------------- > Ethernet Driver Guide > diff --git a/doc/README.fdt-control b/doc/README.fdt-control index > e53cf51875..424d13fc5b 100644 > --- a/doc/README.fdt-control > +++ b/doc/README.fdt-control > @@ -182,7 +182,7 @@ U-Boot can be divided into three phases: TPL, SPL and U- > Boot proper. > > The full device tree is available to U-Boot proper, but normally only a subset (or > none at all) is available to TPL and SPL. See 'Pre-Relocation Support' and -'SPL > Support' in doc/driver-model/README.txt for more details. > +'SPL Support' in doc/driver-model/design.rst for more details. > > > Using several DTBs in the SPL (CONFIG_SPL_MULTI_DTB) diff --git > a/drivers/i2c/davinci_i2c.c b/drivers/i2c/davinci_i2c.c index > 2c77234c60..edc40f706c 100644 > --- a/drivers/i2c/davinci_i2c.c > +++ b/drivers/i2c/davinci_i2c.c > @@ -8,7 +8,7 @@ > * -------------------------------------------------------- > * > * NOTE: This driver should be converted to driver model before June 2017. > - * Please see doc/driver-model/i2c-howto.txt for instructions. > + * Please see doc/driver-model/i2c-howto.rst for instructions. > */ > > #include > diff --git a/drivers/i2c/kona_i2c.c b/drivers/i2c/kona_i2c.c index > 0726b4c956..8e31481c0f 100644 > --- a/drivers/i2c/kona_i2c.c > +++ b/drivers/i2c/kona_i2c.c > @@ -3,7 +3,7 @@ > * Copyright 2013 Broadcom Corporation. > * > * NOTE: This driver should be converted to driver model before June 2017. > - * Please see doc/driver-model/i2c-howto.txt for instructions. > + * Please see doc/driver-model/i2c-howto.rst for instructions. > */ > > #include > diff --git a/drivers/i2c/sh_i2c.c b/drivers/i2c/sh_i2c.c index b69d213593..834f1f2179 > 100644 > --- a/drivers/i2c/sh_i2c.c > +++ b/drivers/i2c/sh_i2c.c > @@ -4,7 +4,7 @@ > * Copyright (C) 2011, 2013 Nobuhiro Iwamatsu > > * > * NOTE: This driver should be converted to driver model before June 2017. > - * Please see doc/driver-model/i2c-howto.txt for instructions. > + * Please see doc/driver-model/i2c-howto.rst for instructions. > */ > > #include > diff --git a/drivers/i2c/soft_i2c.c b/drivers/i2c/soft_i2c.c index > 7f0303cc05..9ad1c281ff 100644 > --- a/drivers/i2c/soft_i2c.c > +++ b/drivers/i2c/soft_i2c.c > @@ -12,7 +12,7 @@ > * Neil Russell. > * > * NOTE: This driver should be converted to driver model before June 2017. > - * Please see doc/driver-model/i2c-howto.txt for instructions. > + * Please see doc/driver-model/i2c-howto.rst for instructions. > */ > > #include > diff --git a/tools/dtoc/dtb_platdata.py b/tools/dtoc/dtb_platdata.py index > 037e82c8bb..90a9e1a626 100644 > --- a/tools/dtoc/dtb_platdata.py > +++ b/tools/dtoc/dtb_platdata.py > @@ -423,7 +423,7 @@ class DtbPlatdata(object): > > This writes out the body of a header file consisting of structure > definitions for node in self._valid_nodes. See the documentation in > - README.of-plat for more information. > + doc/driver-model/of-plat.rst for more information. > """ > self.out_header() > self.out('#include \n') @@ -527,7 +527,7 @@ class > DtbPlatdata(object): > U_BOOT_DEVICE() declarations for each valid node. Where a node has > multiple compatible strings, a #define is used to make them equivalent. > > - See the documentation in doc/driver-model/of-plat.txt for more > + See the documentation in doc/driver-model/of-plat.rst for more > information. > """ > self.out_header() > diff --git a/tools/dtoc/dtoc.py b/tools/dtoc/dtoc.py index b3596a5918..f31cba900e > 100755 > --- a/tools/dtoc/dtoc.py > +++ b/tools/dtoc/dtoc.py > @@ -22,7 +22,7 @@ Dtoc produces two output files: > This tool is used in U-Boot to provide device tree data to SPL without increasing > the code size of SPL. This supports the CONFIG_SPL_OF_PLATDATA options. > For more information about the use of this options and tool please -see > doc/driver-model/of-plat.txt > +see doc/driver-model/of-plat.rst > """ > > from __future__ import print_function > -- > 2.25.0 Regards Patrick