Hi,

On Mon, 2021-01-11 at 15:22 +0100, Maxime Ripard wrote:
> Hi,
> 
> Here's a series introducing the CEC support for the BCM2711 found on the
> RaspberryPi4.
> 
> The BCM2711 HDMI controller uses a similar layout for the CEC registers, the
> main difference being that the interrupt handling part is now shared between
> both HDMI controllers.
> 
> This series is mainly about fixing a couple of bugs, reworking the driver to
> support having two different interrupts, one for each direction, provided by an
> external irqchip, and enables the irqchip driver for the controller we have.
> 
> This has been tested on an RPi3 and RPi4, but requires the latest firmware.
> It's is based on the 10 and 12 bpc series.

I applied patches #1 and #14 for-next. I'm waiting on Hans' testing for #15.

Regards,
Nicolas