From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id ED70DC64ED8 for ; Fri, 24 Feb 2023 08:48:27 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S229852AbjBXIs0 (ORCPT ); Fri, 24 Feb 2023 03:48:26 -0500 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:60820 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S229558AbjBXIsW (ORCPT ); Fri, 24 Feb 2023 03:48:22 -0500 Received: from mxout70.expurgate.net (mxout70.expurgate.net [194.37.255.70]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 3418D54A23 for ; Fri, 24 Feb 2023 00:48:20 -0800 (PST) Received: from [127.0.0.1] (helo=localhost) by relay.expurgate.net with smtp (Exim 4.92) (envelope-from ) id 1pVTkP-000QAx-6R; Fri, 24 Feb 2023 09:48:09 +0100 Received: from [195.243.126.94] (helo=securemail.tdt.de) by relay.expurgate.net with esmtps (TLS1.3:ECDHE_RSA_AES_256_GCM_SHA384:256) (Exim 4.92) (envelope-from ) id 1pVTkO-0008GQ-0t; Fri, 24 Feb 2023 09:48:08 +0100 Received: from securemail.tdt.de (localhost [127.0.0.1]) by securemail.tdt.de (Postfix) with ESMTP id 8DF66240049; Fri, 24 Feb 2023 09:48:07 +0100 (CET) Received: from mail.dev.tdt.de (unknown [10.2.4.42]) by securemail.tdt.de (Postfix) with ESMTP id DF262240040; Fri, 24 Feb 2023 09:48:06 +0100 (CET) Received: from mail.dev.tdt.de (localhost [IPv6:::1]) by mail.dev.tdt.de (Postfix) with ESMTP id 8F9972D463; Fri, 24 Feb 2023 09:48:06 +0100 (CET) MIME-Version: 1.0 Content-Type: text/plain; charset=US-ASCII; format=flowed Content-Transfer-Encoding: 7bit Date: Fri, 24 Feb 2023 09:48:06 +0100 From: Martin Schiller To: Michael Walle Cc: tharvey@gateworks.com, andrew@lunn.ch, davem@davemloft.net, f.fainelli@gmail.com, hauke@hauke-m.de, hkallweit1@gmail.com, kuba@kernel.org, linux-kernel@vger.kernel.org, linux@armlinux.org.uk, martin.blumenstingl@googlemail.com, netdev@vger.kernel.org Subject: Re: [PATCH net-next v6] net: phy: intel-xway: Add RGMII internal delay configuration Organization: TDT AG In-Reply-To: References: <20230222160425.4040683-1-michael@walle.cc> <8aa26f417c99761cdf1b6b7082fdec14@dev.tdt.de> Message-ID: X-Sender: ms@dev.tdt.de User-Agent: Roundcube Webmail/1.3.17 X-purgate: clean X-purgate-type: clean X-purgate-ID: 151534::1677228488-0E3ECD43-8A4F9273/0/0 Precedence: bulk List-ID: X-Mailing-List: linux-kernel@vger.kernel.org On 2023-02-24 09:04, Michael Walle wrote: > Hi Martin, > > Am 2023-02-24 07:25, schrieb Martin Schiller: >> On 2023-02-22 17:04, Michael Walle wrote: >>> Hi Tim, Hi Martin, >>> >>>> I've got some boards with the GPY111 phy on them and I'm finding >>>> that >>>> modifying XWAY_MDIO_MIICTRL to change the skew has no effect unless >>>> I >>>> do a soft reset (BCMR_RESET) first. I don't see anything in the >>>> datasheet which specifies this to be the case so I'm interested it >>>> what you have found. Are you sure adjusting the skews like this >>>> without a soft (or hard pin based) reset actually works? >>> >>> I do have the same PHY and I'm puzzled with the delay settings. Do >>> you have an EEPROM attached to the PHY? According to my datasheet, >>> that seems to make a difference. Apparently, only if there is an >>> EEPROM, you can change the value (the value is then also written to >>> the EEPROM according the datasheet). >>> If you don't have one, the values will get overwritten by the >>> external strappings on a soft reset. Therefore, it seems they cannot >>> be set. (FWIW there is also a sticky bit, but that doesn't seem to >>> help in this case). >>> >>> -michael >> >> Yes, you are right. The datasheet says: "In no-EEPROM mode, writing to >> this register has no impact on operation of the device". >> >> But changing this settings without an EEPROM indeed has an impact. >> >> We don't use an EEPROM and without tuning this values some boards are >> unable to communicate on the ethernet port(s). > > Thanks for confirming! Could you share your PHYID1/PHYID2 register and > firmware version (FWV, 0x1E) contents? I've 2 PHYs integrated into the VR268 SoC which shows this values: STD_PHYID1(reg 0x02): 0xd565 STD_PHYID2(reg 0x03): 0xa409 PHY_FWV (reg 0x1E): 0x8435 And then there are 2 external GPY111 with this values: STD_PHYID1(reg 0x02): 0xd565 STD_PHYID2(reg 0x03): 0xa401 PHY_FWV (reg 0x1E): 0x8435 And one external GPY112 with this values: STD_PHYID1(reg 0x02): 0xd565 STD_PHYID2(reg 0x03): 0xa401 PHY_FWV (reg 0x1E): 0x8435 > > In our case, any changes in MIICTRL are lost after a soft reset. > >> I varied these values during operation in the uboot and was able to >> test >> the limits very nicely. > > So I guess, the value you write into MIICTRL are retained on a soft > reset. No, the value I write into MIICTRL are not retained on a soft reset. > I.e. > > mii write 0x17 0xffff > mii write 0x00 0x8000 > mii read 0x17 > > will still return 0xffff? In my tests I always set the skew values in register 0x17 first and then triggered a restart of the ANEG via register 0x0. This then led to the new values being adopted. > >> >> I wouldn't have introduced this feature if it hasn't got any impact. > > Sure, I'm just trying to figure out the differences ;) > > Thanks, > Michael - Martin