This one ?

bianchi@bianchi-HP-Pavilion-dv6-Notebook-PC:~/poky/build$ wget https://www.example.com/
--2017-08-09 16:33:05--  https://www.example.com/
Resolving www.example.com (www.example.com)... failed: Name or service not known.
wget: unable to resolve host address 'www.example.com’

For some reason, bitbake can't do "wget https://www.example.com/".   Try running that command outside of bitbake and seeing if it returns any errors.

Ross

On 9 August 2017 at 09:29, Riko <antonius.riko@gmail.com> wrote:

Dear Yocto Member,


I have downloaded fresh install of yocto but got error, here's the trace :

bianchi@bianchi-HP-Pavilion-dv6-Notebook-PC:~$ git clone -b pyro git://git.yoctoproject.org/poky.git
Cloning into 'poky'...
remote: Counting objects: 373183, done.
remote: Compressing objects: 100% (89366/89366), done.
remote: Total 373183 (delta 277418), reused 373031 (delta 277266)
Receiving objects: 100% (373183/373183), 134.71 MiB | 1.47 MiB/s, done.
Resolving deltas: 100% (277418/277418), done.
Checking connectivity... done.


bianchi@bianchi-HP-Pavilion-dv6-Notebook-PC:~/poky$ source oe-init-build-env
You had no conf/local.conf file. This configuration file has therefore been
created for you with some default values. You may wish to edit it to, for
example, select a different MACHINE (target hardware). See conf/local.conf
for more information as common configuration options are commented.

You had no conf/bblayers.conf file. This configuration file has therefore been
created for you with some default values. To add additional metadata layers
into your configuration please add entries to conf/bblayers.conf.

The Yocto Project has extensive documentation about OE including a reference
manual which can be found at:
    http://yoctoproject.org/documentation

For more information about OpenEmbedded see their website:
    http://www.openembedded.org/


### Shell environment set up for builds. ###

You can now run 'bitbake <target>'

Common targets are:
    core-image-minimal
    core-image-sato
    meta-toolchain
    meta-ide-support

You can also run generated qemu images with a command like 'runqemu qemux86'
bianchi@bianchi-HP-Pavilion-dv6-Notebook-PC:~/poky/build$ bitbake core-image-minimal
ERROR:  OE-core's config sanity checker detected a potential misconfiguration.
    Either fix the cause of this error or at your own risk disable the checker (see sanity.conf).
    Following is the list of potential problems / advisories:

    Fetcher failure for URL: 'https://www.example.com/'. URL https://www.example.com/ doesn't work.
    Please ensure your host's network is configured correctly,
    or set BB_NO_NETWORK = "1" to disable network access if
    all required sources are on local disk.


Summary: There was 1 ERROR message shown, returning a non-zero exit code.


Any suggestions ?

I'm using ubuntu 16.04,

Thanks

--
_______________________________________________
yocto mailing list
yocto@yoctoproject.org
https://lists.yoctoproject.org/listinfo/yocto