From mboxrd@z Thu Jan  1 00:00:00 1970
From: Marek Vasut <marex@denx.de>
Date: Wed, 16 May 2018 11:37:22 +0200
Subject: [U-Boot] [PATCH v2] phy: add support for STM32 usb phy
	controller
In-Reply-To: <a2d9d885-13b5-cd48-c7b7-799a5652e004@st.com>
References: <1524819715-23074-1-git-send-email-patrice.chotard@st.com>
 <0849b46f-a605-78fb-3264-df0e8ea07014@denx.de>
 <a2d9d885-13b5-cd48-c7b7-799a5652e004@st.com>
Message-ID: <ae82f808-b8b1-8924-e873-af71a6c94c21@denx.de>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

On 05/15/2018 03:27 PM, Patrice CHOTARD wrote:
> Hi Marek
> 
> On 04/27/2018 11:18 AM, Marek Vasut wrote:
>> On 04/27/2018 11:01 AM, Patrice Chotard wrote:
>>> This patch adds phy tranceiver driver for STM32 USB PHY
>>> Controller (usbphyc) that provides dual port High-Speed
>>> phy for OTG (single port) and EHCI/OHCI host controller
>>> (two ports).
>>
>> Oh, I see.
>>
>>> One port of the phy is shared between the two USB controllers
>>> through a UTMI+ switch.
>>>
>>> Signed-off-by: Christophe Kerello <christophe.kerello@st.com>
>>> Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com>
>>> Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
>>> ---
>>
>> [...]
>>
>>> +static int stm32_usbphyc_probe(struct udevice *dev)
>>> +{
>>> +	struct stm32_usbphyc *usbphyc = dev_get_priv(dev);
>>> +	struct reset_ctl reset;
>>> +	ofnode node;
>>> +	int i, ret;
>>> +
>>> +	usbphyc->base = dev_read_addr(dev);
>>> +	if (usbphyc->base == FDT_ADDR_T_NONE)
>>> +		return -EINVAL;
>>> +
>>> +	/* Enable clock */
>>> +	ret = clk_get_by_index(dev, 0, &usbphyc->clk);
>>> +	if (ret)
>>> +		return ret;
>>> +
>>> +	ret = clk_enable(&usbphyc->clk);
>>> +	if (ret)
>>> +		return ret;
>>> +
>>> +	/* Reset */
>>> +	ret = reset_get_by_index(dev, 0, &reset);
>>> +	if (!ret) {
>>> +		reset_assert(&reset);
>>> +		udelay(2);
>>> +		reset_deassert(&reset);
>>
>> Shouldn't the reset delay be a reset controller property ?
>>
>>> +	}
>>
>> Looks good,
>> Reviewed-by: Marek Vasut <marex@denx.de>
>>
>> Remind me to pick it after the release please.
>>
> 
> As you requested to me, can you pick the patch ?

I had to tweak the patch a bit, since it didnt apply anymore. Please
check if it's correct, it should be OK though.

-- 
Best regards,
Marek Vasut