From mboxrd@z Thu Jan 1 00:00:00 1970 From: Michal Simek Date: Mon, 30 Apr 2018 11:02:24 +0200 Subject: [U-Boot] [UBOOT PATCH v3 0/7] Add support of SD3.0 UHS modes for ZynqMP In-Reply-To: <1524121630-13933-1-git-send-email-siva.durga.paladugu@xilinx.com> References: <1524121630-13933-1-git-send-email-siva.durga.paladugu@xilinx.com> Message-ID: List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Hi Tom, On 19.4.2018 09:07, Siva Durga Prasad Paladugu wrote: > This patch series is meant to add SD3.0 support for ZynqMP > platform. > The first five patches in the series mostly setting up > things in sdhci layer to support SD3.0 , the sixth patch > is to add SD3.0 support for ZynqMP platform and the last > patch is to enable this support for ZynqMP zcu102 rev1.0 > eval board. > > Siva Durga Prasad Paladugu (7): > mmc: sdhci: Add support for disabling clock > mmc: sdhci: Handle execute tuning command in sdhci_send_command > sdhci: Add new sdhci ops for platform specific tuning and delays > mmc: sdhci: Invoke platform specific tuning and delay routines > mmc : sdhci: Read capabilities register1 and update host caps > mmc: zynq_sdhci: Add support for SD3.0 > zynqmp: zcu102: Enable UHS support for ZCU102 Rev1.0 board > > board/xilinx/zynqmp/Makefile | 2 + > board/xilinx/zynqmp/tap_delays.c | 229 +++++++++++++++++++++++++ > configs/xilinx_zynqmp_zcu102_rev1_0_defconfig | 2 + > drivers/mmc/sdhci.c | 63 ++++++- > drivers/mmc/zynq_sdhci.c | 231 +++++++++++++++++++++++++- > include/sdhci.h | 8 + > include/zynqmp_tap_delay.h | 20 +++ > 7 files changed, 547 insertions(+), 8 deletions(-) > create mode 100644 board/xilinx/zynqmp/tap_delays.c > create mode 100644 include/zynqmp_tap_delay.h > It looks like that Jaehoon is out or busy with something else. Can you please recommend someone to take a look at these patches? Definitely feel free to look at it self. Thanks, Michal