All of lore.kernel.org
 help / color / mirror / Atom feed
From: ingrassia@epigenesys.com (Emiliano Ingrassia)
To: linus-amlogic@lists.infradead.org
Subject: [PATCH 2/4] ARM: dts: meson8b: extending ethernet controller description
Date: Wed, 27 Sep 2017 23:39:53 +0200	[thread overview]
Message-ID: <aecccf76841a035f8dc5cc23dadfad66fbbac03e.1506507688.git.ingrassia@epigenesys.com> (raw)
In-Reply-To: <cover.1506507688.git.ingrassia@epigenesys.com>

This patch adds ethernet controller pin description and extend its
attributes in the relative node.

Signed-off-by: Emiliano Ingrassia <ingrassia@epigenesys.com>
---

This patch corrects the meson8b-dwmac reg attributes updated by the previous
2/4 patch (450a483abe07f8d903c6cb74091592743975a8eb).
The second addresses range, taken from S805 (aka Meson8b) SoC manual,
was not correct.

Please, apply this patch and discard the previous
(450a483abe07f8d903c6cb74091592743975a8eb).

 arch/arm/boot/dts/meson8b.dtsi | 40 ++++++++++++++++++++++++++++++++++++++--
 1 file changed, 38 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/meson8b.dtsi b/arch/arm/boot/dts/meson8b.dtsi
index bc278da7df0d..816bc9188f44 100644
--- a/arch/arm/boot/dts/meson8b.dtsi
+++ b/arch/arm/boot/dts/meson8b.dtsi
@@ -154,12 +154,48 @@
 			#gpio-cells = <2>;
 			gpio-ranges = <&pinctrl_cbus 0 0 130>;
 		};
+
+		eth_rgmii_pins: eth-rgmii {
+			mux {
+				groups = "eth_tx_clk",
+					 "eth_tx_en",
+					 "eth_txd1_0",
+					 "eth_txd1_1",
+					 "eth_txd0_0",
+					 "eth_txd0_1",
+					 "eth_rx_clk",
+					 "eth_rx_dv",
+					 "eth_rxd1",
+					 "eth_rxd0",
+					 "eth_mdio_en",
+					 "eth_mdc",
+					 "eth_ref_clk",
+					 "eth_txd2",
+					 "eth_txd3";
+				function = "ethernet";
+			};
+		};
 	};
 };
 
 &ethmac {
-	clocks = <&clkc CLKID_ETH>;
-	clock-names = "stmmaceth";
+	compatible = "amlogic,meson8b-dwmac", "snps,dwmac-3.70a", "snps,dwmac";
+
+	interrupts = <GIC_SPI 8 IRQ_TYPE_EDGE_RISING>,
+		     <GIC_SPI 14 IRQ_TYPE_EDGE_RISING>;
+	interrupt-names = "macirq",
+			  "eth_lpi";
+
+	clock-names = "stmmaceth", "clkin0", "clkin1";
+	clocks = <&clkc CLKID_ETH>,
+		 <&clkc CLKID_FCLK_DIV2>,
+		 <&clkc CLKID_MPLL2>;
+
+	resets = <&reset RESET_ETHERNET>;
+	reset-names = "stmmaceth";
+
+	rx-fifo-depth=<4000>;
+	tx-fifo-depth=<2000>;
 };
 
 &hwrng {
-- 
2.14.1

  parent reply	other threads:[~2017-09-27 21:39 UTC|newest]

Thread overview: 27+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-09-27 10:39 [PATCH 0/4] meson8b-odroidc1: ethernet support Emiliano Ingrassia
2017-09-27 10:40 ` [PATCH 1/4] clk: meson8b: keep mpll2 clock enabled Emiliano Ingrassia
2017-09-28  7:11   ` Jerome Brunet
2017-09-28  9:59     ` Emiliano Ingrassia
2017-09-28 15:08       ` Jerome Brunet
2017-09-28 21:29         ` Martin Blumenstingl
2017-09-30 17:08           ` Emiliano Ingrassia
2017-09-27 10:40 ` [PATCH 2/4] ARM: dts: meson8b: extending ethernet controller description Emiliano Ingrassia
2017-09-27 10:41 ` [PATCH 3/4] ARM: dts: meson8b-odroidc1: enabling ethernet support Emiliano Ingrassia
2017-09-27 10:46 ` [PATCH 4/4] net: stmmac: fixing DMA reset sleep and timeout values Emiliano Ingrassia
2017-09-27 10:46   ` Emiliano Ingrassia
2017-09-27 21:39 ` Emiliano Ingrassia [this message]
2017-09-28  2:23   ` [PATCH 2/4] ARM: dts: meson8b: extending ethernet controller description Linus Lüssing
2017-09-28 10:31     ` Emiliano Ingrassia
2017-09-28 21:41   ` Martin Blumenstingl
2017-09-29 19:10     ` Emiliano Ingrassia
2017-09-30 14:09       ` Martin Blumenstingl
2017-11-21 15:36         ` Emiliano Ingrassia
2017-11-26 21:02           ` Martin Blumenstingl
2017-11-26 21:58             ` Martin Blumenstingl
2017-12-04 22:37             ` Emiliano Ingrassia
2017-12-16 23:39               ` Martin Blumenstingl
2017-12-18 20:07                 ` Emiliano Ingrassia
2017-10-02 19:54 ` [PATCH 0/4] meson8b-odroidc1: ethernet support Linus Lüssing
2017-10-06  8:10   ` Emiliano Ingrassia
2017-11-21 11:57   ` Linus Lüssing
2017-11-21 15:40     ` Emiliano Ingrassia

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=aecccf76841a035f8dc5cc23dadfad66fbbac03e.1506507688.git.ingrassia@epigenesys.com \
    --to=ingrassia@epigenesys.com \
    --cc=linus-amlogic@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.