From mboxrd@z Thu Jan 1 00:00:00 1970 From: Joao Pinto Subject: [PATCH v2 net-next 1/8] net: stmicro: multiple queues dt configuration Date: Wed, 8 Mar 2017 12:22:41 +0000 Message-ID: References: Cc: peppe.cavallaro@st.com, alexandre.torgue@st.com, netdev@vger.kernel.org, Joao Pinto To: davem@davemloft.net Return-path: Received: from smtprelay.synopsys.com ([198.182.60.111]:60676 "EHLO smtprelay.synopsys.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1752655AbdCHMsU (ORCPT ); Wed, 8 Mar 2017 07:48:20 -0500 In-Reply-To: In-Reply-To: References: Sender: netdev-owner@vger.kernel.org List-ID: This patch adds the multiple queues configuration in the Device Tree. It was also created a set of structures to keep the RX and TX queues configurations to be used in the driver. Signed-off-by: Joao Pinto --- changes v1->v2: - RX and TX queues child nodes had bad handle Documentation/devicetree/bindings/net/stmmac.txt | 40 ++++++++++ .../net/ethernet/stmicro/stmmac/stmmac_platform.c | 91 ++++++++++++++++++++++ include/linux/stmmac.h | 30 +++++++ 3 files changed, 161 insertions(+) diff --git a/Documentation/devicetree/bindings/net/stmmac.txt b/Documentation/devicetree/bindings/net/stmmac.txt index d3bfc2b..4107e67 100644 --- a/Documentation/devicetree/bindings/net/stmmac.txt +++ b/Documentation/devicetree/bindings/net/stmmac.txt @@ -72,6 +72,27 @@ Optional properties: - snps,mb: mixed-burst - snps,rb: rebuild INCRx Burst - mdio: with compatible = "snps,dwmac-mdio", create and register mdio bus. +- Multiple RX Queues parameters: below the list of all the parameters to + configure the multiple RX queues: + - snps,rx-queues-to-use: number of RX queues to be used in the driver + - Choose one of these RX scheduling algorithms: + - snps,rx-sched-sp: Strict priority + - snps,rx-sched-wsp: Weighted Strict priority + - For each RX queue + - Choose one of these modes: + - snps,dcb-algorithm: Queue to be enabled as DCB + - snps,avb-algorithm: Queue to be enabled as AVB + - snps,map-to-dma-channel: Channel to map +- Multiple TX Queues parameters: below the list of all the parameters to + configure the multiple TX queues: + - snps,tx-queues-to-use: number of TX queues to be used in the driver + - Choose one of these TX scheduling algorithms: + - snps,tx-sched-wrr: Weighted Round Robin + - snps,tx-sched-wfq: Weighted Fair Queuing + - snps,tx-sched-dwrr: Deficit Weighted Round Robin + - snps,tx-sched-sp: Strict priority + - For each TX queue + - snps,weight: TX queue weight (if using a weighted algorithm) Examples: @@ -81,6 +102,23 @@ Examples: snps,blen = <256 128 64 32 0 0 0>; }; + mtl_rx_setup: rx-queues-config { + snps,rx-queues-to-use = <1>; + snps,rx-sched-sp; + queue0 { + snps,dcb-algorithm; + snps,map-to-dma-channel = <0x0>; + }; + }; + + mtl_tx_setup: tx-queues-config { + snps,tx-queues-to-use = <1>; + snps,tx-sched-wrr; + queue0 { + snps,weight = <0x10>; + }; + }; + gmac0: ethernet@e0800000 { compatible = "st,spear600-gmac"; reg = <0xe0800000 0x8000>; @@ -104,4 +142,6 @@ Examples: phy1: ethernet-phy@0 { }; }; + snps,mtl-rx-config = <&mtl_rx_setup>; + snps,mtl-tx-config = <&mtl_tx_setup>; }; diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c index 433a842..ef91a42 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c @@ -132,6 +132,95 @@ static struct stmmac_axi *stmmac_axi_setup(struct platform_device *pdev) } /** + * stmmac_mtl_setup - parse DT parameters for multiple queues configuration + * @pdev: platform device + */ +static void stmmac_mtl_setup(struct platform_device *pdev, + struct plat_stmmacenet_data *plat) +{ + struct device_node *q_node; + struct device_node *rx_node; + struct device_node *tx_node; + u8 queue = 0; + + rx_node = of_parse_phandle(pdev->dev.of_node, "snps,mtl-rx-config", 0); + if (!rx_node) + return; + + tx_node = of_parse_phandle(pdev->dev.of_node, "snps,mtl-tx-config", 0); + if (!tx_node) { + of_node_put(rx_node); + return; + } + + /* Processing RX queues common config */ + if (of_property_read_u8(rx_node, "snps,rx-queues-to-use", + &plat->rx_queues_to_use)) + plat->rx_queues_to_use = 1; + + if (of_property_read_bool(rx_node, "snps,rx-sched-sp")) + plat->rx_sched_algorithm = MTL_RX_ALGORITHM_SP; + else if (of_property_read_bool(rx_node, "snps,rx-sched-wsp")) + plat->rx_sched_algorithm = MTL_RX_ALGORITHM_WSP; + else + plat->rx_sched_algorithm = MTL_RX_ALGORITHM_SP; + + /* Processing individual RX queue config */ + for_each_child_of_node(rx_node, q_node) { + if (queue >= plat->rx_queues_to_use) + break; + + if (of_property_read_bool(q_node, "snps,dcb-algorithm")) + plat->rx_queues_cfg[queue].mode_to_use = MTL_RX_DCB; + else if (of_property_read_bool(q_node, "snps,avb-algorithm")) + plat->rx_queues_cfg[queue].mode_to_use = MTL_RX_AVB; + else + plat->rx_queues_cfg[queue].mode_to_use = MTL_RX_DCB; + + if (of_property_read_u8(q_node, "snps,map-to-dma-channel", + &plat->rx_queues_cfg[queue].chan)) + plat->rx_queues_cfg[queue].chan = queue; + /* TODO: Dynamic mapping to be included in the future */ + + queue++; + } + + /* Processing TX queues common config */ + if (of_property_read_u8(tx_node, "snps,tx-queues-to-use", + &plat->tx_queues_to_use)) + plat->tx_queues_to_use = 1; + + if (of_property_read_bool(tx_node, "snps,tx-sched-wrr")) + plat->tx_sched_algorithm = MTL_TX_ALGORITHM_WRR; + else if (of_property_read_bool(tx_node, "snps,tx-sched-wfq")) + plat->tx_sched_algorithm = MTL_TX_ALGORITHM_WFQ; + else if (of_property_read_bool(tx_node, "snps,tx-sched-dwrr")) + plat->tx_sched_algorithm = MTL_TX_ALGORITHM_DWRR; + else if (of_property_read_bool(tx_node, "snps,tx-sched-sp")) + plat->tx_sched_algorithm = MTL_TX_ALGORITHM_SP; + else + plat->tx_sched_algorithm = MTL_TX_ALGORITHM_SP; + + queue = 0; + + /* Processing individual TX queue config */ + for_each_child_of_node(tx_node, q_node) { + if (queue >= plat->tx_queues_to_use) + break; + + if (of_property_read_u8(q_node, "snps,weight", + &plat->tx_queues_cfg[queue].weight)) + plat->tx_queues_cfg[queue].weight = 0x10 + queue; + + queue++; + } + + of_node_put(rx_node); + of_node_put(tx_node); + of_node_put(q_node); +} + +/** * stmmac_dt_phy - parse device-tree driver parameters to allocate PHY resources * @plat: driver data platform structure * @np: device tree node @@ -340,6 +429,8 @@ stmmac_probe_config_dt(struct platform_device *pdev, const char **mac) plat->axi = stmmac_axi_setup(pdev); + stmmac_mtl_setup(pdev, plat); + /* clock setup */ plat->stmmac_clk = devm_clk_get(&pdev->dev, STMMAC_RESOURCE_NAME); diff --git a/include/linux/stmmac.h b/include/linux/stmmac.h index fc273e9..266ff2a 100644 --- a/include/linux/stmmac.h +++ b/include/linux/stmmac.h @@ -28,6 +28,9 @@ #include +#define MTL_MAX_RX_QUEUES 8 +#define MTL_MAX_TX_QUEUES 8 + #define STMMAC_RX_COE_NONE 0 #define STMMAC_RX_COE_TYPE1 1 #define STMMAC_RX_COE_TYPE2 2 @@ -44,6 +47,18 @@ #define STMMAC_CSR_150_250M 0x4 /* MDC = clk_scr_i/102 */ #define STMMAC_CSR_250_300M 0x5 /* MDC = clk_scr_i/122 */ +/* MTL algorithms identifiers */ +#define MTL_TX_ALGORITHM_WRR 0x0 +#define MTL_TX_ALGORITHM_WFQ 0x1 +#define MTL_TX_ALGORITHM_DWRR 0x2 +#define MTL_TX_ALGORITHM_SP 0x3 +#define MTL_RX_ALGORITHM_SP 0x4 +#define MTL_RX_ALGORITHM_WSP 0x5 + +/* RX Queue Mode */ +#define MTL_RX_DCB 0x0 +#define MTL_RX_AVB 0x1 + /* The MDC clock could be set higher than the IEEE 802.3 * specified frequency limit 0f 2.5 MHz, by programming a clock divider * of value different than the above defined values. The resultant MDIO @@ -109,6 +124,15 @@ struct stmmac_axi { bool axi_rb; }; +struct stmmac_rxq_cfg { + u8 mode_to_use; + u8 chan; +}; + +struct stmmac_txq_cfg { + u8 weight; +}; + struct plat_stmmacenet_data { int bus_id; int phy_addr; @@ -133,6 +157,12 @@ struct plat_stmmacenet_data { int unicast_filter_entries; int tx_fifo_size; int rx_fifo_size; + u8 rx_queues_to_use; + u8 tx_queues_to_use; + u8 rx_sched_algorithm; + u8 tx_sched_algorithm; + struct stmmac_rxq_cfg rx_queues_cfg[MTL_MAX_RX_QUEUES]; + struct stmmac_txq_cfg tx_queues_cfg[MTL_MAX_TX_QUEUES]; void (*fix_mac_speed)(void *priv, unsigned int speed); int (*init)(struct platform_device *pdev, void *priv); void (*exit)(struct platform_device *pdev, void *priv); -- 2.9.3