diff for duplicates of <alpine.DEB.2.02.1408201021440.11079@atx-linux-37>
diff --git a/a/1.txt b/N1/1.txt
index a66dbc4..340d7d7 100644
--- a/a/1.txt
+++ b/N1/1.txt
@@ -4,7 +4,7 @@ On Wed, 20 Aug 2014, atull wrote:
>
> On Wed, 20 Aug 2014, Romain Baeriswyl wrote:
>
-> > From: Romain Baeriswyl <Romain.Baeriswyl@abilis.com>
+> > From: Romain Baeriswyl <Romain.Baeriswyl-ux6zf3SgZrrQT0dZR+AlfA@public.gmane.org>
> >
> > Some legacy devices support ony I2C standard mode at 100kHz.
> > This patch allows to select the standard mode through the DTS
@@ -13,8 +13,8 @@ On Wed, 20 Aug 2014, atull wrote:
> > When clock-frequency parameter is not set, the fast mode is selected.
> > Only when the parameter is set at 100000, the standard mode is selected.
> >
-> > Signed-off-by: Romain Baeriswyl <romainba@abilis.com>
-> > Reviewed-by: Christian Ruppert <christian.ruppert@abilis.com>
+> > Signed-off-by: Romain Baeriswyl <romainba-ux6zf3SgZrrQT0dZR+AlfA@public.gmane.org>
+> > Reviewed-by: Christian Ruppert <christian.ruppert-ux6zf3SgZrrQT0dZR+AlfA@public.gmane.org>
> > ---
> > drivers/i2c/busses/i2c-designware-platdrv.c | 23 +++++++++++++++++++++--
> > 1 files changed, 21 insertions(+), 2 deletions(-)
@@ -83,7 +83,7 @@ Hi Romain,
This looks fine to me, my "<= issues" are not important as this isn't
really setting a frequency, but just setting a bit that controls speed.
-Acked-by: Alan Tull <atull@opensource.altera.com>
+Acked-by: Alan Tull <atull-yzvPICuk2ABMcg4IHK0kFoH6Mc4MB0Vx@public.gmane.org>
> > + dev->master_cfg = DW_IC_CON_MASTER | DW_IC_CON_SLAVE_DISABLE |
diff --git a/a/content_digest b/N1/content_digest
index c35fcc7..b3d39e2 100644
--- a/a/content_digest
+++ b/N1/content_digest
@@ -8,7 +8,7 @@
"ref\0alpine.DEB.2.02.1408200928130.11079\@atx-linux-37\0"
]
[
- "From\0atull <atull\@opensource.altera.com>\0"
+ "From\0atull <atull-yzvPICuk2ABMcg4IHK0kFoH6Mc4MB0Vx\@public.gmane.org>\0"
]
[
"Subject\0Re: [PATCH] i2c designware add support of I2C standard mode\0"
@@ -17,26 +17,26 @@
"Date\0Wed, 20 Aug 2014 10:25:40 -0500\0"
]
[
- "To\0Romain Baeriswyl <Romain.Baeriswyl\@abilis.com>\0"
+ "To\0Romain Baeriswyl <Romain.Baeriswyl-ux6zf3SgZrrQT0dZR+AlfA\@public.gmane.org>\0"
]
[
- "Cc\0Wolfram Sang <wsa\@the-dreams.de>",
- " Mika Westerberg <mika.westerberg\@linux.intel.com>",
- " Christian Ruppert <christian.ruppert\@abilis.com>",
- " Rafael J. Wysocki <rafael.j.wysocki\@intel.com>",
- " <linux-i2c\@vger.kernel.org>",
- " <linux-kernel\@vger.kernel.org>",
- " Mark Rutland <mark.rutland\@arm.com>",
- " <baruch\@tkos.co.il>",
- " <grant.likely\@linaro.org>",
- " <robh+dt\@kernel.org>",
- " <skuribay\@pobox.com>",
- " <alan\@linux.intel.com>",
- " <devicetree\@vger.kernel.org>",
- " <delicious.quinoa\@gmail.com>",
- " <dinguyen\@opensource.altera.com>",
- " <yvanderv\@opensource.altera.com>",
- " Romain Baeriswyl <romainba\@abilis.com>\0"
+ "Cc\0Wolfram Sang <wsa-z923LK4zBo2bacvFa/9K2g\@public.gmane.org>",
+ " Mika Westerberg <mika.westerberg-VuQAYsv1563Yd54FQh9/CA\@public.gmane.org>",
+ " Christian Ruppert <christian.ruppert-ux6zf3SgZrrQT0dZR+AlfA\@public.gmane.org>",
+ " Rafael J. Wysocki <rafael.j.wysocki-ral2JQCrhuEAvxtiuMwx3w\@public.gmane.org>",
+ " linux-i2c-u79uwXL29TY76Z2rM5mHXA\@public.gmane.org",
+ " linux-kernel-u79uwXL29TY76Z2rM5mHXA\@public.gmane.org",
+ " Mark Rutland <mark.rutland-5wv7dgnIgG8\@public.gmane.org>",
+ " baruch-NswTu9S1W3P6gbPvEgmw2w\@public.gmane.org",
+ " grant.likely-QSEj5FYQhm4dnm+yROfE0A\@public.gmane.org",
+ " robh+dt-DgEjT+Ai2ygdnm+yROfE0A\@public.gmane.org",
+ " skuribay-e+AXbWqSrlAAvxtiuMwx3w\@public.gmane.org",
+ " alan-VuQAYsv1563Yd54FQh9/CA\@public.gmane.org",
+ " devicetree-u79uwXL29TY76Z2rM5mHXA\@public.gmane.org",
+ " delicious.quinoa-Re5JQEeQqe8AvxtiuMwx3w\@public.gmane.org",
+ " dinguyen-yzvPICuk2ABMcg4IHK0kFoH6Mc4MB0Vx\@public.gmane.org",
+ " yvanderv-yzvPICuk2ABMcg4IHK0kFoH6Mc4MB0Vx\@public.gmane.org",
+ " Romain Baeriswyl <romainba-ux6zf3SgZrrQT0dZR+AlfA\@public.gmane.org>\0"
]
[
"\0000:1\0"
@@ -51,7 +51,7 @@
"> \n",
"> On Wed, 20 Aug 2014, Romain Baeriswyl wrote:\n",
"> \n",
- "> > From: Romain Baeriswyl <Romain.Baeriswyl\@abilis.com>\n",
+ "> > From: Romain Baeriswyl <Romain.Baeriswyl-ux6zf3SgZrrQT0dZR+AlfA\@public.gmane.org>\n",
"> > \n",
"> > Some legacy devices support ony I2C standard mode at 100kHz.\n",
"> > This patch allows to select the standard mode through the DTS\n",
@@ -60,8 +60,8 @@
"> > When clock-frequency parameter is not set, the fast mode is selected.\n",
"> > Only when the parameter is set at 100000, the standard mode is selected.\n",
"> > \n",
- "> > Signed-off-by: Romain Baeriswyl <romainba\@abilis.com>\n",
- "> > Reviewed-by: Christian Ruppert <christian.ruppert\@abilis.com>\n",
+ "> > Signed-off-by: Romain Baeriswyl <romainba-ux6zf3SgZrrQT0dZR+AlfA\@public.gmane.org>\n",
+ "> > Reviewed-by: Christian Ruppert <christian.ruppert-ux6zf3SgZrrQT0dZR+AlfA\@public.gmane.org>\n",
"> > ---\n",
"> > drivers/i2c/busses/i2c-designware-platdrv.c | 23 +++++++++++++++++++++--\n",
"> > 1 files changed, 21 insertions(+), 2 deletions(-)\n",
@@ -130,7 +130,7 @@
"This looks fine to me, my \"<= issues\" are not important as this isn't \n",
"really setting a frequency, but just setting a bit that controls speed.\n",
"\n",
- "Acked-by: Alan Tull <atull\@opensource.altera.com>\n",
+ "Acked-by: Alan Tull <atull-yzvPICuk2ABMcg4IHK0kFoH6Mc4MB0Vx\@public.gmane.org>\n",
"\n",
"\n",
"> > +\t\tdev->master_cfg = DW_IC_CON_MASTER | DW_IC_CON_SLAVE_DISABLE |\n",
@@ -148,4 +148,4 @@
">"
]
-f79eb53ad5b436a3a688e0aeaa8c8db7420c3180020c5e4a7737c0109eb5e4d3
+f6c72cb02678a04e74c20c41cc58c725633af07db2aec4421e3801c931869271
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.