* [PATCHv2 00/27] ARM: OMAP2+: clock code migration to drivers/clk/ti
@ 2015-05-11 8:54 ` Tero Kristo
0 siblings, 0 replies; 120+ messages in thread
From: Tero Kristo @ 2015-05-11 8:54 UTC (permalink / raw)
To: mturquette, tony, linux-omap, linux-clk, sboyd, paul; +Cc: linux-arm-kernel
Hi,
This set moves most of the OMAP2+ clock driver code under drivers/clk.
There are still a couple of files under mach-omap2 folder after this
set which have either unmet dependencies still (towards PRCM driver)
or is currently slightly broken (some of the DVFS code for OMAP2/OMAP3.)
Earlier version of this set has been posted back in March (see
http://www.spinics.net/lists/linux-omap/msg116418.html), mostly
the code is the same except patches 25+ which are new.
Overall diffstat for this set:
42 files changed, 2644 insertions(+), 3707 deletions(-)
Testing done:
am335x-evm : boot
am335x-evmsk : boot
am3517-evm : boot
am37x-evm : boot
am43x-epos-evm : boot
am437x-gp-evm : boot
omap3-beagle-xm : boot
omap3-beagle : boot, suspend-resume (ret/off), cpuidle (ret/off)
am335x-boneblack: boot
am335x-bone : boot
craneboard : boot
dra7xx-evm : boot
omap3430-ldp : boot
omap3-n900 : boot
omap5-uevm : boot
omap4-panda-es : boot, suspend-resume (ret), cpuidle (ret)
omap4-panda : boot
omap2430-sdp : boot
omap3430-sdp : boot
omap4-sdp-es23plus: boot
Branch info:
- tree: https://github.com/t-kristo/linux-pm.git
- branch: for-4.2/ti-clk-move
-Tero
^ permalink raw reply [flat|nested] 120+ messages in thread
* [PATCHv2 00/27] ARM: OMAP2+: clock code migration to drivers/clk/ti
@ 2015-05-11 8:54 ` Tero Kristo
0 siblings, 0 replies; 120+ messages in thread
From: Tero Kristo @ 2015-05-11 8:54 UTC (permalink / raw)
To: mturquette, tony, linux-omap, linux-clk, sboyd, paul; +Cc: linux-arm-kernel
Hi,
This set moves most of the OMAP2+ clock driver code under drivers/clk.
There are still a couple of files under mach-omap2 folder after this
set which have either unmet dependencies still (towards PRCM driver)
or is currently slightly broken (some of the DVFS code for OMAP2/OMAP3.)
Earlier version of this set has been posted back in March (see
http://www.spinics.net/lists/linux-omap/msg116418.html), mostly
the code is the same except patches 25+ which are new.
Overall diffstat for this set:
42 files changed, 2644 insertions(+), 3707 deletions(-)
Testing done:
am335x-evm : boot
am335x-evmsk : boot
am3517-evm : boot
am37x-evm : boot
am43x-epos-evm : boot
am437x-gp-evm : boot
omap3-beagle-xm : boot
omap3-beagle : boot, suspend-resume (ret/off), cpuidle (ret/off)
am335x-boneblack: boot
am335x-bone : boot
craneboard : boot
dra7xx-evm : boot
omap3430-ldp : boot
omap3-n900 : boot
omap5-uevm : boot
omap4-panda-es : boot, suspend-resume (ret), cpuidle (ret)
omap4-panda : boot
omap2430-sdp : boot
omap3430-sdp : boot
omap4-sdp-es23plus: boot
Branch info:
- tree: https://github.com/t-kristo/linux-pm.git
- branch: for-4.2/ti-clk-move
-Tero
^ permalink raw reply [flat|nested] 120+ messages in thread
* [PATCHv2 00/27] ARM: OMAP2+: clock code migration to drivers/clk/ti
@ 2015-05-11 8:54 ` Tero Kristo
0 siblings, 0 replies; 120+ messages in thread
From: Tero Kristo @ 2015-05-11 8:54 UTC (permalink / raw)
To: linux-arm-kernel
Hi,
This set moves most of the OMAP2+ clock driver code under drivers/clk.
There are still a couple of files under mach-omap2 folder after this
set which have either unmet dependencies still (towards PRCM driver)
or is currently slightly broken (some of the DVFS code for OMAP2/OMAP3.)
Earlier version of this set has been posted back in March (see
http://www.spinics.net/lists/linux-omap/msg116418.html), mostly
the code is the same except patches 25+ which are new.
Overall diffstat for this set:
42 files changed, 2644 insertions(+), 3707 deletions(-)
Testing done:
am335x-evm : boot
am335x-evmsk : boot
am3517-evm : boot
am37x-evm : boot
am43x-epos-evm : boot
am437x-gp-evm : boot
omap3-beagle-xm : boot
omap3-beagle : boot, suspend-resume (ret/off), cpuidle (ret/off)
am335x-boneblack: boot
am335x-bone : boot
craneboard : boot
dra7xx-evm : boot
omap3430-ldp : boot
omap3-n900 : boot
omap5-uevm : boot
omap4-panda-es : boot, suspend-resume (ret), cpuidle (ret)
omap4-panda : boot
omap2430-sdp : boot
omap3430-sdp : boot
omap4-sdp-es23plus: boot
Branch info:
- tree: https://github.com/t-kristo/linux-pm.git
- branch: for-4.2/ti-clk-move
-Tero
^ permalink raw reply [flat|nested] 120+ messages in thread
* [PATCHv2 01/27] ARM: OMAP2+: clock: export driver API to setup/get clock features
2015-05-11 8:54 ` Tero Kristo
(?)
@ 2015-05-11 8:54 ` Tero Kristo
-1 siblings, 0 replies; 120+ messages in thread
From: Tero Kristo @ 2015-05-11 8:54 UTC (permalink / raw)
To: mturquette, tony, linux-omap, linux-clk, sboyd, paul; +Cc: linux-arm-kernel
As most of the clock driver support code is going to be moved under
drivers/clk/ti, an API for setting / getting the SoC specific clock
features is needed. This patch provides this API and changes the
existing code to use it.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
---
arch/arm/mach-omap2/clkt_dpll.c | 14 +++++++-------
arch/arm/mach-omap2/clock.c | 36 +++++++++++++++++-------------------
arch/arm/mach-omap2/clock.h | 18 ------------------
arch/arm/mach-omap2/clock3xxx.c | 4 ++--
arch/arm/mach-omap2/dpll3xxx.c | 4 ++--
drivers/clk/ti/clk.c | 25 +++++++++++++++++++++++++
include/linux/clk/ti.h | 16 ++++++++++++++++
7 files changed, 69 insertions(+), 48 deletions(-)
diff --git a/arch/arm/mach-omap2/clkt_dpll.c b/arch/arm/mach-omap2/clkt_dpll.c
index f251a14..82f0600 100644
--- a/arch/arm/mach-omap2/clkt_dpll.c
+++ b/arch/arm/mach-omap2/clkt_dpll.c
@@ -80,8 +80,8 @@ static int _dpll_test_fint(struct clk_hw_omap *clk, unsigned int n)
fint_min = OMAP3PLUS_DPLL_FINT_JTYPE_MIN;
fint_max = OMAP3PLUS_DPLL_FINT_JTYPE_MAX;
} else {
- fint_min = ti_clk_features.fint_min;
- fint_max = ti_clk_features.fint_max;
+ fint_min = ti_clk_get_features()->fint_min;
+ fint_max = ti_clk_get_features()->fint_max;
}
if (!fint_min || !fint_max) {
@@ -89,18 +89,18 @@ static int _dpll_test_fint(struct clk_hw_omap *clk, unsigned int n)
return DPLL_FINT_INVALID;
}
- if (fint < ti_clk_features.fint_min) {
+ if (fint < ti_clk_get_features()->fint_min) {
pr_debug("rejecting n=%d due to Fint failure, lowering max_divider\n",
n);
dd->max_divider = n;
ret = DPLL_FINT_UNDERFLOW;
- } else if (fint > ti_clk_features.fint_max) {
+ } else if (fint > ti_clk_get_features()->fint_max) {
pr_debug("rejecting n=%d due to Fint failure, boosting min_divider\n",
n);
dd->min_divider = n;
ret = DPLL_FINT_INVALID;
- } else if (fint > ti_clk_features.fint_band1_max &&
- fint < ti_clk_features.fint_band2_min) {
+ } else if (fint > ti_clk_get_features()->fint_band1_max &&
+ fint < ti_clk_get_features()->fint_band2_min) {
pr_debug("rejecting n=%d due to Fint failure\n", n);
ret = DPLL_FINT_INVALID;
}
@@ -183,7 +183,7 @@ static int _omap2_dpll_is_in_bypass(u32 v)
{
u8 mask, val;
- mask = ti_clk_features.dpll_bypass_vals;
+ mask = ti_clk_get_features()->dpll_bypass_vals;
/*
* Each set bit in the mask corresponds to a bypass value equal
diff --git a/arch/arm/mach-omap2/clock.c b/arch/arm/mach-omap2/clock.c
index a699d71..cbc65b3 100644
--- a/arch/arm/mach-omap2/clock.c
+++ b/arch/arm/mach-omap2/clock.c
@@ -48,11 +48,6 @@
u16 cpu_mask;
-/*
- * Clock features setup. Used instead of CPU type checks.
- */
-struct ti_clk_features ti_clk_features;
-
/* DPLL valid Fint frequency band limits - from 34xx TRM Section 4.7.6.2 */
#define OMAP3430_DPLL_FINT_BAND1_MIN 750000
#define OMAP3430_DPLL_FINT_BAND1_MAX 2100000
@@ -367,7 +362,7 @@ void omap2_clk_dflt_find_idlest(struct clk_hw_omap *clk,
* 34xx reverses this, just to keep us on our toes
* AM35xx uses both, depending on the module.
*/
- *idlest_val = ti_clk_features.cm_idlest_val;
+ *idlest_val = ti_clk_get_features()->cm_idlest_val;
}
/**
@@ -801,29 +796,30 @@ void __init omap2_clk_print_new_rates(const char *hfclkin_ck_name,
*/
void __init ti_clk_init_features(void)
{
+ struct ti_clk_features features = { 0 };
/* Fint setup for DPLLs */
if (cpu_is_omap3430()) {
- ti_clk_features.fint_min = OMAP3430_DPLL_FINT_BAND1_MIN;
- ti_clk_features.fint_max = OMAP3430_DPLL_FINT_BAND2_MAX;
- ti_clk_features.fint_band1_max = OMAP3430_DPLL_FINT_BAND1_MAX;
- ti_clk_features.fint_band2_min = OMAP3430_DPLL_FINT_BAND2_MIN;
+ features.fint_min = OMAP3430_DPLL_FINT_BAND1_MIN;
+ features.fint_max = OMAP3430_DPLL_FINT_BAND2_MAX;
+ features.fint_band1_max = OMAP3430_DPLL_FINT_BAND1_MAX;
+ features.fint_band2_min = OMAP3430_DPLL_FINT_BAND2_MIN;
} else {
- ti_clk_features.fint_min = OMAP3PLUS_DPLL_FINT_MIN;
- ti_clk_features.fint_max = OMAP3PLUS_DPLL_FINT_MAX;
+ features.fint_min = OMAP3PLUS_DPLL_FINT_MIN;
+ features.fint_max = OMAP3PLUS_DPLL_FINT_MAX;
}
/* Bypass value setup for DPLLs */
if (cpu_is_omap24xx()) {
- ti_clk_features.dpll_bypass_vals |=
+ features.dpll_bypass_vals |=
(1 << OMAP2XXX_EN_DPLL_LPBYPASS) |
(1 << OMAP2XXX_EN_DPLL_FRBYPASS);
} else if (cpu_is_omap34xx()) {
- ti_clk_features.dpll_bypass_vals |=
+ features.dpll_bypass_vals |=
(1 << OMAP3XXX_EN_DPLL_LPBYPASS) |
(1 << OMAP3XXX_EN_DPLL_FRBYPASS);
} else if (soc_is_am33xx() || cpu_is_omap44xx() || soc_is_am43xx() ||
soc_is_omap54xx() || soc_is_dra7xx()) {
- ti_clk_features.dpll_bypass_vals |=
+ features.dpll_bypass_vals |=
(1 << OMAP4XXX_EN_DPLL_LPBYPASS) |
(1 << OMAP4XXX_EN_DPLL_FRBYPASS) |
(1 << OMAP4XXX_EN_DPLL_MNBYPASS);
@@ -831,7 +827,7 @@ void __init ti_clk_init_features(void)
/* Jitter correction only available on OMAP343X */
if (cpu_is_omap343x())
- ti_clk_features.flags |= TI_CLK_DPLL_HAS_FREQSEL;
+ features.flags |= TI_CLK_DPLL_HAS_FREQSEL;
/* Idlest value for interface clocks.
* 24xx uses 0 to indicate not ready, and 1 to indicate ready.
@@ -839,11 +835,13 @@ void __init ti_clk_init_features(void)
* AM35xx uses both, depending on the module.
*/
if (cpu_is_omap24xx())
- ti_clk_features.cm_idlest_val = OMAP24XX_CM_IDLEST_VAL;
+ features.cm_idlest_val = OMAP24XX_CM_IDLEST_VAL;
else if (cpu_is_omap34xx())
- ti_clk_features.cm_idlest_val = OMAP34XX_CM_IDLEST_VAL;
+ features.cm_idlest_val = OMAP34XX_CM_IDLEST_VAL;
/* On OMAP3430 ES1.0, DPLL4 can't be re-programmed */
if (omap_rev() == OMAP3430_REV_ES1_0)
- ti_clk_features.flags |= TI_CLK_DPLL4_DENY_REPROGRAM;
+ features.flags |= TI_CLK_DPLL4_DENY_REPROGRAM;
+
+ ti_clk_setup_features(&features);
}
diff --git a/arch/arm/mach-omap2/clock.h b/arch/arm/mach-omap2/clock.h
index 652ed0a..ac21856 100644
--- a/arch/arm/mach-omap2/clock.h
+++ b/arch/arm/mach-omap2/clock.h
@@ -225,24 +225,6 @@ void omap2_clk_writel(u32 val, struct clk_hw_omap *clk, void __iomem *reg);
extern u16 cpu_mask;
-/*
- * Clock features setup. Used instead of CPU type checks.
- */
-struct ti_clk_features {
- u32 flags;
- long fint_min;
- long fint_max;
- long fint_band1_max;
- long fint_band2_min;
- u8 dpll_bypass_vals;
- u8 cm_idlest_val;
-};
-
-#define TI_CLK_DPLL_HAS_FREQSEL (1 << 0)
-#define TI_CLK_DPLL4_DENY_REPROGRAM (1 << 1)
-
-extern struct ti_clk_features ti_clk_features;
-
extern const struct clkops clkops_omap2_dflt_wait;
extern const struct clkops clkops_omap2_dflt;
diff --git a/arch/arm/mach-omap2/clock3xxx.c b/arch/arm/mach-omap2/clock3xxx.c
index a9e86db..8bede6a 100644
--- a/arch/arm/mach-omap2/clock3xxx.c
+++ b/arch/arm/mach-omap2/clock3xxx.c
@@ -58,7 +58,7 @@ int omap3_dpll4_set_rate(struct clk_hw *hw, unsigned long rate,
* on 3430ES1 prevents us from changing DPLL multipliers or dividers
* on DPLL4.
*/
- if (ti_clk_features.flags & TI_CLK_DPLL4_DENY_REPROGRAM) {
+ if (ti_clk_get_features()->flags & TI_CLK_DPLL4_DENY_REPROGRAM) {
pr_err("clock: DPLL4 cannot change rate due to silicon 'Limitation 2.5' on 3430ES1.\n");
return -EINVAL;
}
@@ -81,7 +81,7 @@ int omap3_dpll4_set_rate(struct clk_hw *hw, unsigned long rate,
int omap3_dpll4_set_rate_and_parent(struct clk_hw *hw, unsigned long rate,
unsigned long parent_rate, u8 index)
{
- if (ti_clk_features.flags & TI_CLK_DPLL4_DENY_REPROGRAM) {
+ if (ti_clk_get_features()->flags & TI_CLK_DPLL4_DENY_REPROGRAM) {
pr_err("clock: DPLL4 cannot change rate due to silicon 'Limitation 2.5' on 3430ES1.\n");
return -EINVAL;
}
diff --git a/arch/arm/mach-omap2/dpll3xxx.c b/arch/arm/mach-omap2/dpll3xxx.c
index 44e57ec..9a80f59 100644
--- a/arch/arm/mach-omap2/dpll3xxx.c
+++ b/arch/arm/mach-omap2/dpll3xxx.c
@@ -307,7 +307,7 @@ static int omap3_noncore_dpll_program(struct clk_hw_omap *clk, u16 freqsel)
* Set jitter correction. Jitter correction applicable for OMAP343X
* only since freqsel field is no longer present on other devices.
*/
- if (ti_clk_features.flags & TI_CLK_DPLL_HAS_FREQSEL) {
+ if (ti_clk_get_features()->flags & TI_CLK_DPLL_HAS_FREQSEL) {
v = omap2_clk_readl(clk, dd->control_reg);
v &= ~dd->freqsel_mask;
v |= freqsel << __ffs(dd->freqsel_mask);
@@ -559,7 +559,7 @@ int omap3_noncore_dpll_set_rate(struct clk_hw *hw, unsigned long rate,
return -EINVAL;
/* Freqsel is available only on OMAP343X devices */
- if (ti_clk_features.flags & TI_CLK_DPLL_HAS_FREQSEL) {
+ if (ti_clk_get_features()->flags & TI_CLK_DPLL_HAS_FREQSEL) {
freqsel = _omap3_dpll_compute_freqsel(clk, dd->last_rounded_n);
WARN_ON(!freqsel);
}
diff --git a/drivers/clk/ti/clk.c b/drivers/clk/ti/clk.c
index 0ebe5c5..567f8b9 100644
--- a/drivers/clk/ti/clk.c
+++ b/drivers/clk/ti/clk.c
@@ -30,6 +30,8 @@
struct ti_clk_ll_ops *ti_clk_ll_ops;
static struct device_node *clocks_node_ptr[CLK_MAX_MEMMAPS];
+struct ti_clk_features ti_clk_features;
+
/**
* ti_dt_clocks_register - register DT alias clocks during boot
* @oclks: list of clocks to register
@@ -310,4 +312,27 @@ int __init ti_clk_register_legacy_clks(struct ti_clk_alias *clks)
return 0;
}
+
+/**
+ * ti_clk_setup_features - setup clock features flags
+ * @features: features definition to use
+ *
+ * Initializes the clock driver features flags based on platform
+ * provided data. No return value.
+ */
+void __init ti_clk_setup_features(struct ti_clk_features *features)
+{
+ memcpy(&ti_clk_features, features, sizeof(*features));
+}
+
+/**
+ * ti_clk_get_features - get clock driver features flags
+ *
+ * Get TI clock driver features description. Returns a pointer
+ * to the current feature setup.
+ */
+struct ti_clk_features *ti_clk_get_features(void)
+{
+ return &ti_clk_features;
+}
#endif
diff --git a/include/linux/clk/ti.h b/include/linux/clk/ti.h
index 79b76e1..b066835 100644
--- a/include/linux/clk/ti.h
+++ b/include/linux/clk/ti.h
@@ -338,6 +338,22 @@ int am43xx_dt_clk_init(void);
int omap2420_dt_clk_init(void);
int omap2430_dt_clk_init(void);
+struct ti_clk_features {
+ u32 flags;
+ long fint_min;
+ long fint_max;
+ long fint_band1_max;
+ long fint_band2_min;
+ u8 dpll_bypass_vals;
+ u8 cm_idlest_val;
+};
+
+#define TI_CLK_DPLL_HAS_FREQSEL BIT(0)
+#define TI_CLK_DPLL4_DENY_REPROGRAM BIT(1)
+
+void ti_clk_setup_features(struct ti_clk_features *features);
+struct ti_clk_features *ti_clk_get_features(void);
+
#ifdef CONFIG_OF
void of_ti_clk_allow_autoidle_all(void);
void of_ti_clk_deny_autoidle_all(void);
--
1.7.9.5
^ permalink raw reply related [flat|nested] 120+ messages in thread
* [PATCHv2 01/27] ARM: OMAP2+: clock: export driver API to setup/get clock features
@ 2015-05-11 8:54 ` Tero Kristo
0 siblings, 0 replies; 120+ messages in thread
From: Tero Kristo @ 2015-05-11 8:54 UTC (permalink / raw)
To: mturquette, tony, linux-omap, linux-clk, sboyd, paul; +Cc: linux-arm-kernel
As most of the clock driver support code is going to be moved under
drivers/clk/ti, an API for setting / getting the SoC specific clock
features is needed. This patch provides this API and changes the
existing code to use it.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
---
arch/arm/mach-omap2/clkt_dpll.c | 14 +++++++-------
arch/arm/mach-omap2/clock.c | 36 +++++++++++++++++-------------------
arch/arm/mach-omap2/clock.h | 18 ------------------
arch/arm/mach-omap2/clock3xxx.c | 4 ++--
arch/arm/mach-omap2/dpll3xxx.c | 4 ++--
drivers/clk/ti/clk.c | 25 +++++++++++++++++++++++++
include/linux/clk/ti.h | 16 ++++++++++++++++
7 files changed, 69 insertions(+), 48 deletions(-)
diff --git a/arch/arm/mach-omap2/clkt_dpll.c b/arch/arm/mach-omap2/clkt_dpll.c
index f251a14..82f0600 100644
--- a/arch/arm/mach-omap2/clkt_dpll.c
+++ b/arch/arm/mach-omap2/clkt_dpll.c
@@ -80,8 +80,8 @@ static int _dpll_test_fint(struct clk_hw_omap *clk, unsigned int n)
fint_min = OMAP3PLUS_DPLL_FINT_JTYPE_MIN;
fint_max = OMAP3PLUS_DPLL_FINT_JTYPE_MAX;
} else {
- fint_min = ti_clk_features.fint_min;
- fint_max = ti_clk_features.fint_max;
+ fint_min = ti_clk_get_features()->fint_min;
+ fint_max = ti_clk_get_features()->fint_max;
}
if (!fint_min || !fint_max) {
@@ -89,18 +89,18 @@ static int _dpll_test_fint(struct clk_hw_omap *clk, unsigned int n)
return DPLL_FINT_INVALID;
}
- if (fint < ti_clk_features.fint_min) {
+ if (fint < ti_clk_get_features()->fint_min) {
pr_debug("rejecting n=%d due to Fint failure, lowering max_divider\n",
n);
dd->max_divider = n;
ret = DPLL_FINT_UNDERFLOW;
- } else if (fint > ti_clk_features.fint_max) {
+ } else if (fint > ti_clk_get_features()->fint_max) {
pr_debug("rejecting n=%d due to Fint failure, boosting min_divider\n",
n);
dd->min_divider = n;
ret = DPLL_FINT_INVALID;
- } else if (fint > ti_clk_features.fint_band1_max &&
- fint < ti_clk_features.fint_band2_min) {
+ } else if (fint > ti_clk_get_features()->fint_band1_max &&
+ fint < ti_clk_get_features()->fint_band2_min) {
pr_debug("rejecting n=%d due to Fint failure\n", n);
ret = DPLL_FINT_INVALID;
}
@@ -183,7 +183,7 @@ static int _omap2_dpll_is_in_bypass(u32 v)
{
u8 mask, val;
- mask = ti_clk_features.dpll_bypass_vals;
+ mask = ti_clk_get_features()->dpll_bypass_vals;
/*
* Each set bit in the mask corresponds to a bypass value equal
diff --git a/arch/arm/mach-omap2/clock.c b/arch/arm/mach-omap2/clock.c
index a699d71..cbc65b3 100644
--- a/arch/arm/mach-omap2/clock.c
+++ b/arch/arm/mach-omap2/clock.c
@@ -48,11 +48,6 @@
u16 cpu_mask;
-/*
- * Clock features setup. Used instead of CPU type checks.
- */
-struct ti_clk_features ti_clk_features;
-
/* DPLL valid Fint frequency band limits - from 34xx TRM Section 4.7.6.2 */
#define OMAP3430_DPLL_FINT_BAND1_MIN 750000
#define OMAP3430_DPLL_FINT_BAND1_MAX 2100000
@@ -367,7 +362,7 @@ void omap2_clk_dflt_find_idlest(struct clk_hw_omap *clk,
* 34xx reverses this, just to keep us on our toes
* AM35xx uses both, depending on the module.
*/
- *idlest_val = ti_clk_features.cm_idlest_val;
+ *idlest_val = ti_clk_get_features()->cm_idlest_val;
}
/**
@@ -801,29 +796,30 @@ void __init omap2_clk_print_new_rates(const char *hfclkin_ck_name,
*/
void __init ti_clk_init_features(void)
{
+ struct ti_clk_features features = { 0 };
/* Fint setup for DPLLs */
if (cpu_is_omap3430()) {
- ti_clk_features.fint_min = OMAP3430_DPLL_FINT_BAND1_MIN;
- ti_clk_features.fint_max = OMAP3430_DPLL_FINT_BAND2_MAX;
- ti_clk_features.fint_band1_max = OMAP3430_DPLL_FINT_BAND1_MAX;
- ti_clk_features.fint_band2_min = OMAP3430_DPLL_FINT_BAND2_MIN;
+ features.fint_min = OMAP3430_DPLL_FINT_BAND1_MIN;
+ features.fint_max = OMAP3430_DPLL_FINT_BAND2_MAX;
+ features.fint_band1_max = OMAP3430_DPLL_FINT_BAND1_MAX;
+ features.fint_band2_min = OMAP3430_DPLL_FINT_BAND2_MIN;
} else {
- ti_clk_features.fint_min = OMAP3PLUS_DPLL_FINT_MIN;
- ti_clk_features.fint_max = OMAP3PLUS_DPLL_FINT_MAX;
+ features.fint_min = OMAP3PLUS_DPLL_FINT_MIN;
+ features.fint_max = OMAP3PLUS_DPLL_FINT_MAX;
}
/* Bypass value setup for DPLLs */
if (cpu_is_omap24xx()) {
- ti_clk_features.dpll_bypass_vals |=
+ features.dpll_bypass_vals |=
(1 << OMAP2XXX_EN_DPLL_LPBYPASS) |
(1 << OMAP2XXX_EN_DPLL_FRBYPASS);
} else if (cpu_is_omap34xx()) {
- ti_clk_features.dpll_bypass_vals |=
+ features.dpll_bypass_vals |=
(1 << OMAP3XXX_EN_DPLL_LPBYPASS) |
(1 << OMAP3XXX_EN_DPLL_FRBYPASS);
} else if (soc_is_am33xx() || cpu_is_omap44xx() || soc_is_am43xx() ||
soc_is_omap54xx() || soc_is_dra7xx()) {
- ti_clk_features.dpll_bypass_vals |=
+ features.dpll_bypass_vals |=
(1 << OMAP4XXX_EN_DPLL_LPBYPASS) |
(1 << OMAP4XXX_EN_DPLL_FRBYPASS) |
(1 << OMAP4XXX_EN_DPLL_MNBYPASS);
@@ -831,7 +827,7 @@ void __init ti_clk_init_features(void)
/* Jitter correction only available on OMAP343X */
if (cpu_is_omap343x())
- ti_clk_features.flags |= TI_CLK_DPLL_HAS_FREQSEL;
+ features.flags |= TI_CLK_DPLL_HAS_FREQSEL;
/* Idlest value for interface clocks.
* 24xx uses 0 to indicate not ready, and 1 to indicate ready.
@@ -839,11 +835,13 @@ void __init ti_clk_init_features(void)
* AM35xx uses both, depending on the module.
*/
if (cpu_is_omap24xx())
- ti_clk_features.cm_idlest_val = OMAP24XX_CM_IDLEST_VAL;
+ features.cm_idlest_val = OMAP24XX_CM_IDLEST_VAL;
else if (cpu_is_omap34xx())
- ti_clk_features.cm_idlest_val = OMAP34XX_CM_IDLEST_VAL;
+ features.cm_idlest_val = OMAP34XX_CM_IDLEST_VAL;
/* On OMAP3430 ES1.0, DPLL4 can't be re-programmed */
if (omap_rev() == OMAP3430_REV_ES1_0)
- ti_clk_features.flags |= TI_CLK_DPLL4_DENY_REPROGRAM;
+ features.flags |= TI_CLK_DPLL4_DENY_REPROGRAM;
+
+ ti_clk_setup_features(&features);
}
diff --git a/arch/arm/mach-omap2/clock.h b/arch/arm/mach-omap2/clock.h
index 652ed0a..ac21856 100644
--- a/arch/arm/mach-omap2/clock.h
+++ b/arch/arm/mach-omap2/clock.h
@@ -225,24 +225,6 @@ void omap2_clk_writel(u32 val, struct clk_hw_omap *clk, void __iomem *reg);
extern u16 cpu_mask;
-/*
- * Clock features setup. Used instead of CPU type checks.
- */
-struct ti_clk_features {
- u32 flags;
- long fint_min;
- long fint_max;
- long fint_band1_max;
- long fint_band2_min;
- u8 dpll_bypass_vals;
- u8 cm_idlest_val;
-};
-
-#define TI_CLK_DPLL_HAS_FREQSEL (1 << 0)
-#define TI_CLK_DPLL4_DENY_REPROGRAM (1 << 1)
-
-extern struct ti_clk_features ti_clk_features;
-
extern const struct clkops clkops_omap2_dflt_wait;
extern const struct clkops clkops_omap2_dflt;
diff --git a/arch/arm/mach-omap2/clock3xxx.c b/arch/arm/mach-omap2/clock3xxx.c
index a9e86db..8bede6a 100644
--- a/arch/arm/mach-omap2/clock3xxx.c
+++ b/arch/arm/mach-omap2/clock3xxx.c
@@ -58,7 +58,7 @@ int omap3_dpll4_set_rate(struct clk_hw *hw, unsigned long rate,
* on 3430ES1 prevents us from changing DPLL multipliers or dividers
* on DPLL4.
*/
- if (ti_clk_features.flags & TI_CLK_DPLL4_DENY_REPROGRAM) {
+ if (ti_clk_get_features()->flags & TI_CLK_DPLL4_DENY_REPROGRAM) {
pr_err("clock: DPLL4 cannot change rate due to silicon 'Limitation 2.5' on 3430ES1.\n");
return -EINVAL;
}
@@ -81,7 +81,7 @@ int omap3_dpll4_set_rate(struct clk_hw *hw, unsigned long rate,
int omap3_dpll4_set_rate_and_parent(struct clk_hw *hw, unsigned long rate,
unsigned long parent_rate, u8 index)
{
- if (ti_clk_features.flags & TI_CLK_DPLL4_DENY_REPROGRAM) {
+ if (ti_clk_get_features()->flags & TI_CLK_DPLL4_DENY_REPROGRAM) {
pr_err("clock: DPLL4 cannot change rate due to silicon 'Limitation 2.5' on 3430ES1.\n");
return -EINVAL;
}
diff --git a/arch/arm/mach-omap2/dpll3xxx.c b/arch/arm/mach-omap2/dpll3xxx.c
index 44e57ec..9a80f59 100644
--- a/arch/arm/mach-omap2/dpll3xxx.c
+++ b/arch/arm/mach-omap2/dpll3xxx.c
@@ -307,7 +307,7 @@ static int omap3_noncore_dpll_program(struct clk_hw_omap *clk, u16 freqsel)
* Set jitter correction. Jitter correction applicable for OMAP343X
* only since freqsel field is no longer present on other devices.
*/
- if (ti_clk_features.flags & TI_CLK_DPLL_HAS_FREQSEL) {
+ if (ti_clk_get_features()->flags & TI_CLK_DPLL_HAS_FREQSEL) {
v = omap2_clk_readl(clk, dd->control_reg);
v &= ~dd->freqsel_mask;
v |= freqsel << __ffs(dd->freqsel_mask);
@@ -559,7 +559,7 @@ int omap3_noncore_dpll_set_rate(struct clk_hw *hw, unsigned long rate,
return -EINVAL;
/* Freqsel is available only on OMAP343X devices */
- if (ti_clk_features.flags & TI_CLK_DPLL_HAS_FREQSEL) {
+ if (ti_clk_get_features()->flags & TI_CLK_DPLL_HAS_FREQSEL) {
freqsel = _omap3_dpll_compute_freqsel(clk, dd->last_rounded_n);
WARN_ON(!freqsel);
}
diff --git a/drivers/clk/ti/clk.c b/drivers/clk/ti/clk.c
index 0ebe5c5..567f8b9 100644
--- a/drivers/clk/ti/clk.c
+++ b/drivers/clk/ti/clk.c
@@ -30,6 +30,8 @@
struct ti_clk_ll_ops *ti_clk_ll_ops;
static struct device_node *clocks_node_ptr[CLK_MAX_MEMMAPS];
+struct ti_clk_features ti_clk_features;
+
/**
* ti_dt_clocks_register - register DT alias clocks during boot
* @oclks: list of clocks to register
@@ -310,4 +312,27 @@ int __init ti_clk_register_legacy_clks(struct ti_clk_alias *clks)
return 0;
}
+
+/**
+ * ti_clk_setup_features - setup clock features flags
+ * @features: features definition to use
+ *
+ * Initializes the clock driver features flags based on platform
+ * provided data. No return value.
+ */
+void __init ti_clk_setup_features(struct ti_clk_features *features)
+{
+ memcpy(&ti_clk_features, features, sizeof(*features));
+}
+
+/**
+ * ti_clk_get_features - get clock driver features flags
+ *
+ * Get TI clock driver features description. Returns a pointer
+ * to the current feature setup.
+ */
+struct ti_clk_features *ti_clk_get_features(void)
+{
+ return &ti_clk_features;
+}
#endif
diff --git a/include/linux/clk/ti.h b/include/linux/clk/ti.h
index 79b76e1..b066835 100644
--- a/include/linux/clk/ti.h
+++ b/include/linux/clk/ti.h
@@ -338,6 +338,22 @@ int am43xx_dt_clk_init(void);
int omap2420_dt_clk_init(void);
int omap2430_dt_clk_init(void);
+struct ti_clk_features {
+ u32 flags;
+ long fint_min;
+ long fint_max;
+ long fint_band1_max;
+ long fint_band2_min;
+ u8 dpll_bypass_vals;
+ u8 cm_idlest_val;
+};
+
+#define TI_CLK_DPLL_HAS_FREQSEL BIT(0)
+#define TI_CLK_DPLL4_DENY_REPROGRAM BIT(1)
+
+void ti_clk_setup_features(struct ti_clk_features *features);
+struct ti_clk_features *ti_clk_get_features(void);
+
#ifdef CONFIG_OF
void of_ti_clk_allow_autoidle_all(void);
void of_ti_clk_deny_autoidle_all(void);
--
1.7.9.5
^ permalink raw reply related [flat|nested] 120+ messages in thread
* [PATCHv2 01/27] ARM: OMAP2+: clock: export driver API to setup/get clock features
@ 2015-05-11 8:54 ` Tero Kristo
0 siblings, 0 replies; 120+ messages in thread
From: Tero Kristo @ 2015-05-11 8:54 UTC (permalink / raw)
To: linux-arm-kernel
As most of the clock driver support code is going to be moved under
drivers/clk/ti, an API for setting / getting the SoC specific clock
features is needed. This patch provides this API and changes the
existing code to use it.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
---
arch/arm/mach-omap2/clkt_dpll.c | 14 +++++++-------
arch/arm/mach-omap2/clock.c | 36 +++++++++++++++++-------------------
arch/arm/mach-omap2/clock.h | 18 ------------------
arch/arm/mach-omap2/clock3xxx.c | 4 ++--
arch/arm/mach-omap2/dpll3xxx.c | 4 ++--
drivers/clk/ti/clk.c | 25 +++++++++++++++++++++++++
include/linux/clk/ti.h | 16 ++++++++++++++++
7 files changed, 69 insertions(+), 48 deletions(-)
diff --git a/arch/arm/mach-omap2/clkt_dpll.c b/arch/arm/mach-omap2/clkt_dpll.c
index f251a14..82f0600 100644
--- a/arch/arm/mach-omap2/clkt_dpll.c
+++ b/arch/arm/mach-omap2/clkt_dpll.c
@@ -80,8 +80,8 @@ static int _dpll_test_fint(struct clk_hw_omap *clk, unsigned int n)
fint_min = OMAP3PLUS_DPLL_FINT_JTYPE_MIN;
fint_max = OMAP3PLUS_DPLL_FINT_JTYPE_MAX;
} else {
- fint_min = ti_clk_features.fint_min;
- fint_max = ti_clk_features.fint_max;
+ fint_min = ti_clk_get_features()->fint_min;
+ fint_max = ti_clk_get_features()->fint_max;
}
if (!fint_min || !fint_max) {
@@ -89,18 +89,18 @@ static int _dpll_test_fint(struct clk_hw_omap *clk, unsigned int n)
return DPLL_FINT_INVALID;
}
- if (fint < ti_clk_features.fint_min) {
+ if (fint < ti_clk_get_features()->fint_min) {
pr_debug("rejecting n=%d due to Fint failure, lowering max_divider\n",
n);
dd->max_divider = n;
ret = DPLL_FINT_UNDERFLOW;
- } else if (fint > ti_clk_features.fint_max) {
+ } else if (fint > ti_clk_get_features()->fint_max) {
pr_debug("rejecting n=%d due to Fint failure, boosting min_divider\n",
n);
dd->min_divider = n;
ret = DPLL_FINT_INVALID;
- } else if (fint > ti_clk_features.fint_band1_max &&
- fint < ti_clk_features.fint_band2_min) {
+ } else if (fint > ti_clk_get_features()->fint_band1_max &&
+ fint < ti_clk_get_features()->fint_band2_min) {
pr_debug("rejecting n=%d due to Fint failure\n", n);
ret = DPLL_FINT_INVALID;
}
@@ -183,7 +183,7 @@ static int _omap2_dpll_is_in_bypass(u32 v)
{
u8 mask, val;
- mask = ti_clk_features.dpll_bypass_vals;
+ mask = ti_clk_get_features()->dpll_bypass_vals;
/*
* Each set bit in the mask corresponds to a bypass value equal
diff --git a/arch/arm/mach-omap2/clock.c b/arch/arm/mach-omap2/clock.c
index a699d71..cbc65b3 100644
--- a/arch/arm/mach-omap2/clock.c
+++ b/arch/arm/mach-omap2/clock.c
@@ -48,11 +48,6 @@
u16 cpu_mask;
-/*
- * Clock features setup. Used instead of CPU type checks.
- */
-struct ti_clk_features ti_clk_features;
-
/* DPLL valid Fint frequency band limits - from 34xx TRM Section 4.7.6.2 */
#define OMAP3430_DPLL_FINT_BAND1_MIN 750000
#define OMAP3430_DPLL_FINT_BAND1_MAX 2100000
@@ -367,7 +362,7 @@ void omap2_clk_dflt_find_idlest(struct clk_hw_omap *clk,
* 34xx reverses this, just to keep us on our toes
* AM35xx uses both, depending on the module.
*/
- *idlest_val = ti_clk_features.cm_idlest_val;
+ *idlest_val = ti_clk_get_features()->cm_idlest_val;
}
/**
@@ -801,29 +796,30 @@ void __init omap2_clk_print_new_rates(const char *hfclkin_ck_name,
*/
void __init ti_clk_init_features(void)
{
+ struct ti_clk_features features = { 0 };
/* Fint setup for DPLLs */
if (cpu_is_omap3430()) {
- ti_clk_features.fint_min = OMAP3430_DPLL_FINT_BAND1_MIN;
- ti_clk_features.fint_max = OMAP3430_DPLL_FINT_BAND2_MAX;
- ti_clk_features.fint_band1_max = OMAP3430_DPLL_FINT_BAND1_MAX;
- ti_clk_features.fint_band2_min = OMAP3430_DPLL_FINT_BAND2_MIN;
+ features.fint_min = OMAP3430_DPLL_FINT_BAND1_MIN;
+ features.fint_max = OMAP3430_DPLL_FINT_BAND2_MAX;
+ features.fint_band1_max = OMAP3430_DPLL_FINT_BAND1_MAX;
+ features.fint_band2_min = OMAP3430_DPLL_FINT_BAND2_MIN;
} else {
- ti_clk_features.fint_min = OMAP3PLUS_DPLL_FINT_MIN;
- ti_clk_features.fint_max = OMAP3PLUS_DPLL_FINT_MAX;
+ features.fint_min = OMAP3PLUS_DPLL_FINT_MIN;
+ features.fint_max = OMAP3PLUS_DPLL_FINT_MAX;
}
/* Bypass value setup for DPLLs */
if (cpu_is_omap24xx()) {
- ti_clk_features.dpll_bypass_vals |=
+ features.dpll_bypass_vals |=
(1 << OMAP2XXX_EN_DPLL_LPBYPASS) |
(1 << OMAP2XXX_EN_DPLL_FRBYPASS);
} else if (cpu_is_omap34xx()) {
- ti_clk_features.dpll_bypass_vals |=
+ features.dpll_bypass_vals |=
(1 << OMAP3XXX_EN_DPLL_LPBYPASS) |
(1 << OMAP3XXX_EN_DPLL_FRBYPASS);
} else if (soc_is_am33xx() || cpu_is_omap44xx() || soc_is_am43xx() ||
soc_is_omap54xx() || soc_is_dra7xx()) {
- ti_clk_features.dpll_bypass_vals |=
+ features.dpll_bypass_vals |=
(1 << OMAP4XXX_EN_DPLL_LPBYPASS) |
(1 << OMAP4XXX_EN_DPLL_FRBYPASS) |
(1 << OMAP4XXX_EN_DPLL_MNBYPASS);
@@ -831,7 +827,7 @@ void __init ti_clk_init_features(void)
/* Jitter correction only available on OMAP343X */
if (cpu_is_omap343x())
- ti_clk_features.flags |= TI_CLK_DPLL_HAS_FREQSEL;
+ features.flags |= TI_CLK_DPLL_HAS_FREQSEL;
/* Idlest value for interface clocks.
* 24xx uses 0 to indicate not ready, and 1 to indicate ready.
@@ -839,11 +835,13 @@ void __init ti_clk_init_features(void)
* AM35xx uses both, depending on the module.
*/
if (cpu_is_omap24xx())
- ti_clk_features.cm_idlest_val = OMAP24XX_CM_IDLEST_VAL;
+ features.cm_idlest_val = OMAP24XX_CM_IDLEST_VAL;
else if (cpu_is_omap34xx())
- ti_clk_features.cm_idlest_val = OMAP34XX_CM_IDLEST_VAL;
+ features.cm_idlest_val = OMAP34XX_CM_IDLEST_VAL;
/* On OMAP3430 ES1.0, DPLL4 can't be re-programmed */
if (omap_rev() == OMAP3430_REV_ES1_0)
- ti_clk_features.flags |= TI_CLK_DPLL4_DENY_REPROGRAM;
+ features.flags |= TI_CLK_DPLL4_DENY_REPROGRAM;
+
+ ti_clk_setup_features(&features);
}
diff --git a/arch/arm/mach-omap2/clock.h b/arch/arm/mach-omap2/clock.h
index 652ed0a..ac21856 100644
--- a/arch/arm/mach-omap2/clock.h
+++ b/arch/arm/mach-omap2/clock.h
@@ -225,24 +225,6 @@ void omap2_clk_writel(u32 val, struct clk_hw_omap *clk, void __iomem *reg);
extern u16 cpu_mask;
-/*
- * Clock features setup. Used instead of CPU type checks.
- */
-struct ti_clk_features {
- u32 flags;
- long fint_min;
- long fint_max;
- long fint_band1_max;
- long fint_band2_min;
- u8 dpll_bypass_vals;
- u8 cm_idlest_val;
-};
-
-#define TI_CLK_DPLL_HAS_FREQSEL (1 << 0)
-#define TI_CLK_DPLL4_DENY_REPROGRAM (1 << 1)
-
-extern struct ti_clk_features ti_clk_features;
-
extern const struct clkops clkops_omap2_dflt_wait;
extern const struct clkops clkops_omap2_dflt;
diff --git a/arch/arm/mach-omap2/clock3xxx.c b/arch/arm/mach-omap2/clock3xxx.c
index a9e86db..8bede6a 100644
--- a/arch/arm/mach-omap2/clock3xxx.c
+++ b/arch/arm/mach-omap2/clock3xxx.c
@@ -58,7 +58,7 @@ int omap3_dpll4_set_rate(struct clk_hw *hw, unsigned long rate,
* on 3430ES1 prevents us from changing DPLL multipliers or dividers
* on DPLL4.
*/
- if (ti_clk_features.flags & TI_CLK_DPLL4_DENY_REPROGRAM) {
+ if (ti_clk_get_features()->flags & TI_CLK_DPLL4_DENY_REPROGRAM) {
pr_err("clock: DPLL4 cannot change rate due to silicon 'Limitation 2.5' on 3430ES1.\n");
return -EINVAL;
}
@@ -81,7 +81,7 @@ int omap3_dpll4_set_rate(struct clk_hw *hw, unsigned long rate,
int omap3_dpll4_set_rate_and_parent(struct clk_hw *hw, unsigned long rate,
unsigned long parent_rate, u8 index)
{
- if (ti_clk_features.flags & TI_CLK_DPLL4_DENY_REPROGRAM) {
+ if (ti_clk_get_features()->flags & TI_CLK_DPLL4_DENY_REPROGRAM) {
pr_err("clock: DPLL4 cannot change rate due to silicon 'Limitation 2.5' on 3430ES1.\n");
return -EINVAL;
}
diff --git a/arch/arm/mach-omap2/dpll3xxx.c b/arch/arm/mach-omap2/dpll3xxx.c
index 44e57ec..9a80f59 100644
--- a/arch/arm/mach-omap2/dpll3xxx.c
+++ b/arch/arm/mach-omap2/dpll3xxx.c
@@ -307,7 +307,7 @@ static int omap3_noncore_dpll_program(struct clk_hw_omap *clk, u16 freqsel)
* Set jitter correction. Jitter correction applicable for OMAP343X
* only since freqsel field is no longer present on other devices.
*/
- if (ti_clk_features.flags & TI_CLK_DPLL_HAS_FREQSEL) {
+ if (ti_clk_get_features()->flags & TI_CLK_DPLL_HAS_FREQSEL) {
v = omap2_clk_readl(clk, dd->control_reg);
v &= ~dd->freqsel_mask;
v |= freqsel << __ffs(dd->freqsel_mask);
@@ -559,7 +559,7 @@ int omap3_noncore_dpll_set_rate(struct clk_hw *hw, unsigned long rate,
return -EINVAL;
/* Freqsel is available only on OMAP343X devices */
- if (ti_clk_features.flags & TI_CLK_DPLL_HAS_FREQSEL) {
+ if (ti_clk_get_features()->flags & TI_CLK_DPLL_HAS_FREQSEL) {
freqsel = _omap3_dpll_compute_freqsel(clk, dd->last_rounded_n);
WARN_ON(!freqsel);
}
diff --git a/drivers/clk/ti/clk.c b/drivers/clk/ti/clk.c
index 0ebe5c5..567f8b9 100644
--- a/drivers/clk/ti/clk.c
+++ b/drivers/clk/ti/clk.c
@@ -30,6 +30,8 @@
struct ti_clk_ll_ops *ti_clk_ll_ops;
static struct device_node *clocks_node_ptr[CLK_MAX_MEMMAPS];
+struct ti_clk_features ti_clk_features;
+
/**
* ti_dt_clocks_register - register DT alias clocks during boot
* @oclks: list of clocks to register
@@ -310,4 +312,27 @@ int __init ti_clk_register_legacy_clks(struct ti_clk_alias *clks)
return 0;
}
+
+/**
+ * ti_clk_setup_features - setup clock features flags
+ * @features: features definition to use
+ *
+ * Initializes the clock driver features flags based on platform
+ * provided data. No return value.
+ */
+void __init ti_clk_setup_features(struct ti_clk_features *features)
+{
+ memcpy(&ti_clk_features, features, sizeof(*features));
+}
+
+/**
+ * ti_clk_get_features - get clock driver features flags
+ *
+ * Get TI clock driver features description. Returns a pointer
+ * to the current feature setup.
+ */
+struct ti_clk_features *ti_clk_get_features(void)
+{
+ return &ti_clk_features;
+}
#endif
diff --git a/include/linux/clk/ti.h b/include/linux/clk/ti.h
index 79b76e1..b066835 100644
--- a/include/linux/clk/ti.h
+++ b/include/linux/clk/ti.h
@@ -338,6 +338,22 @@ int am43xx_dt_clk_init(void);
int omap2420_dt_clk_init(void);
int omap2430_dt_clk_init(void);
+struct ti_clk_features {
+ u32 flags;
+ long fint_min;
+ long fint_max;
+ long fint_band1_max;
+ long fint_band2_min;
+ u8 dpll_bypass_vals;
+ u8 cm_idlest_val;
+};
+
+#define TI_CLK_DPLL_HAS_FREQSEL BIT(0)
+#define TI_CLK_DPLL4_DENY_REPROGRAM BIT(1)
+
+void ti_clk_setup_features(struct ti_clk_features *features);
+struct ti_clk_features *ti_clk_get_features(void);
+
#ifdef CONFIG_OF
void of_ti_clk_allow_autoidle_all(void);
void of_ti_clk_deny_autoidle_all(void);
--
1.7.9.5
^ permalink raw reply related [flat|nested] 120+ messages in thread
* [PATCHv2 02/27] clk: ti: move generic OMAP DPLL implementation under drivers/clk
2015-05-11 8:54 ` Tero Kristo
(?)
@ 2015-05-11 8:54 ` Tero Kristo
-1 siblings, 0 replies; 120+ messages in thread
From: Tero Kristo @ 2015-05-11 8:54 UTC (permalink / raw)
To: mturquette, tony, linux-omap, linux-clk, sboyd, paul; +Cc: linux-arm-kernel
With the legacy clock data now gone, we can start moving OMAP clock
type implementations under clock driver. Start this with moving the
generic OMAP DPLL clock type under TI clock driver.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
---
arch/arm/mach-omap2/Makefile | 2 +-
arch/arm/mach-omap2/clkt_dpll.c | 370 ---------------------------------------
drivers/clk/ti/Makefile | 3 +-
drivers/clk/ti/clkt_dpll.c | 369 ++++++++++++++++++++++++++++++++++++++
drivers/clk/ti/clock.h | 2 +
include/linux/clk/ti.h | 1 -
6 files changed, 374 insertions(+), 373 deletions(-)
delete mode 100644 arch/arm/mach-omap2/clkt_dpll.c
create mode 100644 drivers/clk/ti/clkt_dpll.c
diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
index ec002bd..fcb5d47 100644
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -13,7 +13,7 @@ obj-y := id.o io.o control.o mux.o devices.o fb.o serial.o timer.o pm.o \
hwmod-common = omap_hwmod.o omap_hwmod_reset.o \
omap_hwmod_common_data.o
clock-common = clock.o clock_common_data.o \
- clkt_dpll.o clkt_clksel.o
+ clkt_clksel.o
secure-common = omap-smc.o omap-secure.o
obj-$(CONFIG_ARCH_OMAP2) += $(omap-2-3-common) $(hwmod-common)
diff --git a/arch/arm/mach-omap2/clkt_dpll.c b/arch/arm/mach-omap2/clkt_dpll.c
deleted file mode 100644
index 82f0600..0000000
--- a/arch/arm/mach-omap2/clkt_dpll.c
+++ /dev/null
@@ -1,370 +0,0 @@
-/*
- * OMAP2/3/4 DPLL clock functions
- *
- * Copyright (C) 2005-2008 Texas Instruments, Inc.
- * Copyright (C) 2004-2010 Nokia Corporation
- *
- * Contacts:
- * Richard Woodruff <r-woodruff2@ti.com>
- * Paul Walmsley
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#undef DEBUG
-
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/clk-provider.h>
-#include <linux/io.h>
-
-#include <asm/div64.h>
-
-#include "clock.h"
-
-/* DPLL rate rounding: minimum DPLL multiplier, divider values */
-#define DPLL_MIN_MULTIPLIER 2
-#define DPLL_MIN_DIVIDER 1
-
-/* Possible error results from _dpll_test_mult */
-#define DPLL_MULT_UNDERFLOW -1
-
-/*
- * Scale factor to mitigate roundoff errors in DPLL rate rounding.
- * The higher the scale factor, the greater the risk of arithmetic overflow,
- * but the closer the rounded rate to the target rate. DPLL_SCALE_FACTOR
- * must be a power of DPLL_SCALE_BASE.
- */
-#define DPLL_SCALE_FACTOR 64
-#define DPLL_SCALE_BASE 2
-#define DPLL_ROUNDING_VAL ((DPLL_SCALE_BASE / 2) * \
- (DPLL_SCALE_FACTOR / DPLL_SCALE_BASE))
-
-/*
- * DPLL valid Fint frequency range for OMAP36xx and OMAP4xxx.
- * From device data manual section 4.3 "DPLL and DLL Specifications".
- */
-#define OMAP3PLUS_DPLL_FINT_JTYPE_MIN 500000
-#define OMAP3PLUS_DPLL_FINT_JTYPE_MAX 2500000
-
-/* _dpll_test_fint() return codes */
-#define DPLL_FINT_UNDERFLOW -1
-#define DPLL_FINT_INVALID -2
-
-/* Private functions */
-
-/*
- * _dpll_test_fint - test whether an Fint value is valid for the DPLL
- * @clk: DPLL struct clk to test
- * @n: divider value (N) to test
- *
- * Tests whether a particular divider @n will result in a valid DPLL
- * internal clock frequency Fint. See the 34xx TRM 4.7.6.2 "DPLL Jitter
- * Correction". Returns 0 if OK, -1 if the enclosing loop can terminate
- * (assuming that it is counting N upwards), or -2 if the enclosing loop
- * should skip to the next iteration (again assuming N is increasing).
- */
-static int _dpll_test_fint(struct clk_hw_omap *clk, unsigned int n)
-{
- struct dpll_data *dd;
- long fint, fint_min, fint_max;
- int ret = 0;
-
- dd = clk->dpll_data;
-
- /* DPLL divider must result in a valid jitter correction val */
- fint = __clk_get_rate(__clk_get_parent(clk->hw.clk)) / n;
-
- if (dd->flags & DPLL_J_TYPE) {
- fint_min = OMAP3PLUS_DPLL_FINT_JTYPE_MIN;
- fint_max = OMAP3PLUS_DPLL_FINT_JTYPE_MAX;
- } else {
- fint_min = ti_clk_get_features()->fint_min;
- fint_max = ti_clk_get_features()->fint_max;
- }
-
- if (!fint_min || !fint_max) {
- WARN(1, "No fint limits available!\n");
- return DPLL_FINT_INVALID;
- }
-
- if (fint < ti_clk_get_features()->fint_min) {
- pr_debug("rejecting n=%d due to Fint failure, lowering max_divider\n",
- n);
- dd->max_divider = n;
- ret = DPLL_FINT_UNDERFLOW;
- } else if (fint > ti_clk_get_features()->fint_max) {
- pr_debug("rejecting n=%d due to Fint failure, boosting min_divider\n",
- n);
- dd->min_divider = n;
- ret = DPLL_FINT_INVALID;
- } else if (fint > ti_clk_get_features()->fint_band1_max &&
- fint < ti_clk_get_features()->fint_band2_min) {
- pr_debug("rejecting n=%d due to Fint failure\n", n);
- ret = DPLL_FINT_INVALID;
- }
-
- return ret;
-}
-
-static unsigned long _dpll_compute_new_rate(unsigned long parent_rate,
- unsigned int m, unsigned int n)
-{
- unsigned long long num;
-
- num = (unsigned long long)parent_rate * m;
- do_div(num, n);
- return num;
-}
-
-/*
- * _dpll_test_mult - test a DPLL multiplier value
- * @m: pointer to the DPLL m (multiplier) value under test
- * @n: current DPLL n (divider) value under test
- * @new_rate: pointer to storage for the resulting rounded rate
- * @target_rate: the desired DPLL rate
- * @parent_rate: the DPLL's parent clock rate
- *
- * This code tests a DPLL multiplier value, ensuring that the
- * resulting rate will not be higher than the target_rate, and that
- * the multiplier value itself is valid for the DPLL. Initially, the
- * integer pointed to by the m argument should be prescaled by
- * multiplying by DPLL_SCALE_FACTOR. The code will replace this with
- * a non-scaled m upon return. This non-scaled m will result in a
- * new_rate as close as possible to target_rate (but not greater than
- * target_rate) given the current (parent_rate, n, prescaled m)
- * triple. Returns DPLL_MULT_UNDERFLOW in the event that the
- * non-scaled m attempted to underflow, which can allow the calling
- * function to bail out early; or 0 upon success.
- */
-static int _dpll_test_mult(int *m, int n, unsigned long *new_rate,
- unsigned long target_rate,
- unsigned long parent_rate)
-{
- int r = 0, carry = 0;
-
- /* Unscale m and round if necessary */
- if (*m % DPLL_SCALE_FACTOR >= DPLL_ROUNDING_VAL)
- carry = 1;
- *m = (*m / DPLL_SCALE_FACTOR) + carry;
-
- /*
- * The new rate must be <= the target rate to avoid programming
- * a rate that is impossible for the hardware to handle
- */
- *new_rate = _dpll_compute_new_rate(parent_rate, *m, n);
- if (*new_rate > target_rate) {
- (*m)--;
- *new_rate = 0;
- }
-
- /* Guard against m underflow */
- if (*m < DPLL_MIN_MULTIPLIER) {
- *m = DPLL_MIN_MULTIPLIER;
- *new_rate = 0;
- r = DPLL_MULT_UNDERFLOW;
- }
-
- if (*new_rate == 0)
- *new_rate = _dpll_compute_new_rate(parent_rate, *m, n);
-
- return r;
-}
-
-/**
- * _omap2_dpll_is_in_bypass - check if DPLL is in bypass mode or not
- * @v: bitfield value of the DPLL enable
- *
- * Checks given DPLL enable bitfield to see whether the DPLL is in bypass
- * mode or not. Returns 1 if the DPLL is in bypass, 0 otherwise.
- */
-static int _omap2_dpll_is_in_bypass(u32 v)
-{
- u8 mask, val;
-
- mask = ti_clk_get_features()->dpll_bypass_vals;
-
- /*
- * Each set bit in the mask corresponds to a bypass value equal
- * to the bitshift. Go through each set-bit in the mask and
- * compare against the given register value.
- */
- while (mask) {
- val = __ffs(mask);
- mask ^= (1 << val);
- if (v == val)
- return 1;
- }
-
- return 0;
-}
-
-/* Public functions */
-u8 omap2_init_dpll_parent(struct clk_hw *hw)
-{
- struct clk_hw_omap *clk = to_clk_hw_omap(hw);
- u32 v;
- struct dpll_data *dd;
-
- dd = clk->dpll_data;
- if (!dd)
- return -EINVAL;
-
- v = omap2_clk_readl(clk, dd->control_reg);
- v &= dd->enable_mask;
- v >>= __ffs(dd->enable_mask);
-
- /* Reparent the struct clk in case the dpll is in bypass */
- if (_omap2_dpll_is_in_bypass(v))
- return 1;
-
- return 0;
-}
-
-/**
- * omap2_get_dpll_rate - returns the current DPLL CLKOUT rate
- * @clk: struct clk * of a DPLL
- *
- * DPLLs can be locked or bypassed - basically, enabled or disabled.
- * When locked, the DPLL output depends on the M and N values. When
- * bypassed, on OMAP2xxx, the output rate is either the 32KiHz clock
- * or sys_clk. Bypass rates on OMAP3 depend on the DPLL: DPLLs 1 and
- * 2 are bypassed with dpll1_fclk and dpll2_fclk respectively
- * (generated by DPLL3), while DPLL 3, 4, and 5 bypass rates are sys_clk.
- * Returns the current DPLL CLKOUT rate (*not* CLKOUTX2) if the DPLL is
- * locked, or the appropriate bypass rate if the DPLL is bypassed, or 0
- * if the clock @clk is not a DPLL.
- */
-unsigned long omap2_get_dpll_rate(struct clk_hw_omap *clk)
-{
- long long dpll_clk;
- u32 dpll_mult, dpll_div, v;
- struct dpll_data *dd;
-
- dd = clk->dpll_data;
- if (!dd)
- return 0;
-
- /* Return bypass rate if DPLL is bypassed */
- v = omap2_clk_readl(clk, dd->control_reg);
- v &= dd->enable_mask;
- v >>= __ffs(dd->enable_mask);
-
- if (_omap2_dpll_is_in_bypass(v))
- return __clk_get_rate(dd->clk_bypass);
-
- v = omap2_clk_readl(clk, dd->mult_div1_reg);
- dpll_mult = v & dd->mult_mask;
- dpll_mult >>= __ffs(dd->mult_mask);
- dpll_div = v & dd->div1_mask;
- dpll_div >>= __ffs(dd->div1_mask);
-
- dpll_clk = (long long) __clk_get_rate(dd->clk_ref) * dpll_mult;
- do_div(dpll_clk, dpll_div + 1);
-
- return dpll_clk;
-}
-
-/* DPLL rate rounding code */
-
-/**
- * omap2_dpll_round_rate - round a target rate for an OMAP DPLL
- * @clk: struct clk * for a DPLL
- * @target_rate: desired DPLL clock rate
- *
- * Given a DPLL and a desired target rate, round the target rate to a
- * possible, programmable rate for this DPLL. Attempts to select the
- * minimum possible n. Stores the computed (m, n) in the DPLL's
- * dpll_data structure so set_rate() will not need to call this
- * (expensive) function again. Returns ~0 if the target rate cannot
- * be rounded, or the rounded rate upon success.
- */
-long omap2_dpll_round_rate(struct clk_hw *hw, unsigned long target_rate,
- unsigned long *parent_rate)
-{
- struct clk_hw_omap *clk = to_clk_hw_omap(hw);
- int m, n, r, scaled_max_m;
- int min_delta_m = INT_MAX, min_delta_n = INT_MAX;
- unsigned long scaled_rt_rp;
- unsigned long new_rate = 0;
- struct dpll_data *dd;
- unsigned long ref_rate;
- long delta;
- long prev_min_delta = LONG_MAX;
- const char *clk_name;
-
- if (!clk || !clk->dpll_data)
- return ~0;
-
- dd = clk->dpll_data;
-
- ref_rate = __clk_get_rate(dd->clk_ref);
- clk_name = __clk_get_name(hw->clk);
- pr_debug("clock: %s: starting DPLL round_rate, target rate %lu\n",
- clk_name, target_rate);
-
- scaled_rt_rp = target_rate / (ref_rate / DPLL_SCALE_FACTOR);
- scaled_max_m = dd->max_multiplier * DPLL_SCALE_FACTOR;
-
- dd->last_rounded_rate = 0;
-
- for (n = dd->min_divider; n <= dd->max_divider; n++) {
-
- /* Is the (input clk, divider) pair valid for the DPLL? */
- r = _dpll_test_fint(clk, n);
- if (r == DPLL_FINT_UNDERFLOW)
- break;
- else if (r == DPLL_FINT_INVALID)
- continue;
-
- /* Compute the scaled DPLL multiplier, based on the divider */
- m = scaled_rt_rp * n;
-
- /*
- * Since we're counting n up, a m overflow means we
- * can bail out completely (since as n increases in
- * the next iteration, there's no way that m can
- * increase beyond the current m)
- */
- if (m > scaled_max_m)
- break;
-
- r = _dpll_test_mult(&m, n, &new_rate, target_rate,
- ref_rate);
-
- /* m can't be set low enough for this n - try with a larger n */
- if (r == DPLL_MULT_UNDERFLOW)
- continue;
-
- /* skip rates above our target rate */
- delta = target_rate - new_rate;
- if (delta < 0)
- continue;
-
- if (delta < prev_min_delta) {
- prev_min_delta = delta;
- min_delta_m = m;
- min_delta_n = n;
- }
-
- pr_debug("clock: %s: m = %d: n = %d: new_rate = %lu\n",
- clk_name, m, n, new_rate);
-
- if (delta == 0)
- break;
- }
-
- if (prev_min_delta == LONG_MAX) {
- pr_debug("clock: %s: cannot round to rate %lu\n",
- clk_name, target_rate);
- return ~0;
- }
-
- dd->last_rounded_m = min_delta_m;
- dd->last_rounded_n = min_delta_n;
- dd->last_rounded_rate = target_rate - prev_min_delta;
-
- return dd->last_rounded_rate;
-}
-
diff --git a/drivers/clk/ti/Makefile b/drivers/clk/ti/Makefile
index 105ffd0..62dae2a 100644
--- a/drivers/clk/ti/Makefile
+++ b/drivers/clk/ti/Makefile
@@ -1,6 +1,7 @@
obj-y += clk.o autoidle.o clockdomain.o
clk-common = dpll.o composite.o divider.o gate.o \
- fixed-factor.o mux.o apll.o
+ fixed-factor.o mux.o apll.o \
+ clkt_dpll.o
obj-$(CONFIG_SOC_AM33XX) += $(clk-common) clk-33xx.o
obj-$(CONFIG_SOC_TI81XX) += $(clk-common) fapll.o clk-816x.o
obj-$(CONFIG_ARCH_OMAP2) += $(clk-common) interface.o clk-2xxx.o
diff --git a/drivers/clk/ti/clkt_dpll.c b/drivers/clk/ti/clkt_dpll.c
new file mode 100644
index 0000000..a01fc7f
--- /dev/null
+++ b/drivers/clk/ti/clkt_dpll.c
@@ -0,0 +1,369 @@
+/*
+ * OMAP2/3/4 DPLL clock functions
+ *
+ * Copyright (C) 2005-2008 Texas Instruments, Inc.
+ * Copyright (C) 2004-2010 Nokia Corporation
+ *
+ * Contacts:
+ * Richard Woodruff <r-woodruff2@ti.com>
+ * Paul Walmsley
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#undef DEBUG
+
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/clk-provider.h>
+#include <linux/io.h>
+#include <linux/clk/ti.h>
+
+#include <asm/div64.h>
+
+#include "clock.h"
+
+/* DPLL rate rounding: minimum DPLL multiplier, divider values */
+#define DPLL_MIN_MULTIPLIER 2
+#define DPLL_MIN_DIVIDER 1
+
+/* Possible error results from _dpll_test_mult */
+#define DPLL_MULT_UNDERFLOW -1
+
+/*
+ * Scale factor to mitigate roundoff errors in DPLL rate rounding.
+ * The higher the scale factor, the greater the risk of arithmetic overflow,
+ * but the closer the rounded rate to the target rate. DPLL_SCALE_FACTOR
+ * must be a power of DPLL_SCALE_BASE.
+ */
+#define DPLL_SCALE_FACTOR 64
+#define DPLL_SCALE_BASE 2
+#define DPLL_ROUNDING_VAL ((DPLL_SCALE_BASE / 2) * \
+ (DPLL_SCALE_FACTOR / DPLL_SCALE_BASE))
+
+/*
+ * DPLL valid Fint frequency range for OMAP36xx and OMAP4xxx.
+ * From device data manual section 4.3 "DPLL and DLL Specifications".
+ */
+#define OMAP3PLUS_DPLL_FINT_JTYPE_MIN 500000
+#define OMAP3PLUS_DPLL_FINT_JTYPE_MAX 2500000
+
+/* _dpll_test_fint() return codes */
+#define DPLL_FINT_UNDERFLOW -1
+#define DPLL_FINT_INVALID -2
+
+/* Private functions */
+
+/*
+ * _dpll_test_fint - test whether an Fint value is valid for the DPLL
+ * @clk: DPLL struct clk to test
+ * @n: divider value (N) to test
+ *
+ * Tests whether a particular divider @n will result in a valid DPLL
+ * internal clock frequency Fint. See the 34xx TRM 4.7.6.2 "DPLL Jitter
+ * Correction". Returns 0 if OK, -1 if the enclosing loop can terminate
+ * (assuming that it is counting N upwards), or -2 if the enclosing loop
+ * should skip to the next iteration (again assuming N is increasing).
+ */
+static int _dpll_test_fint(struct clk_hw_omap *clk, unsigned int n)
+{
+ struct dpll_data *dd;
+ long fint, fint_min, fint_max;
+ int ret = 0;
+
+ dd = clk->dpll_data;
+
+ /* DPLL divider must result in a valid jitter correction val */
+ fint = __clk_get_rate(__clk_get_parent(clk->hw.clk)) / n;
+
+ if (dd->flags & DPLL_J_TYPE) {
+ fint_min = OMAP3PLUS_DPLL_FINT_JTYPE_MIN;
+ fint_max = OMAP3PLUS_DPLL_FINT_JTYPE_MAX;
+ } else {
+ fint_min = ti_clk_get_features()->fint_min;
+ fint_max = ti_clk_get_features()->fint_max;
+ }
+
+ if (!fint_min || !fint_max) {
+ WARN(1, "No fint limits available!\n");
+ return DPLL_FINT_INVALID;
+ }
+
+ if (fint < ti_clk_get_features()->fint_min) {
+ pr_debug("rejecting n=%d due to Fint failure, lowering max_divider\n",
+ n);
+ dd->max_divider = n;
+ ret = DPLL_FINT_UNDERFLOW;
+ } else if (fint > ti_clk_get_features()->fint_max) {
+ pr_debug("rejecting n=%d due to Fint failure, boosting min_divider\n",
+ n);
+ dd->min_divider = n;
+ ret = DPLL_FINT_INVALID;
+ } else if (fint > ti_clk_get_features()->fint_band1_max &&
+ fint < ti_clk_get_features()->fint_band2_min) {
+ pr_debug("rejecting n=%d due to Fint failure\n", n);
+ ret = DPLL_FINT_INVALID;
+ }
+
+ return ret;
+}
+
+static unsigned long _dpll_compute_new_rate(unsigned long parent_rate,
+ unsigned int m, unsigned int n)
+{
+ unsigned long long num;
+
+ num = (unsigned long long)parent_rate * m;
+ do_div(num, n);
+ return num;
+}
+
+/*
+ * _dpll_test_mult - test a DPLL multiplier value
+ * @m: pointer to the DPLL m (multiplier) value under test
+ * @n: current DPLL n (divider) value under test
+ * @new_rate: pointer to storage for the resulting rounded rate
+ * @target_rate: the desired DPLL rate
+ * @parent_rate: the DPLL's parent clock rate
+ *
+ * This code tests a DPLL multiplier value, ensuring that the
+ * resulting rate will not be higher than the target_rate, and that
+ * the multiplier value itself is valid for the DPLL. Initially, the
+ * integer pointed to by the m argument should be prescaled by
+ * multiplying by DPLL_SCALE_FACTOR. The code will replace this with
+ * a non-scaled m upon return. This non-scaled m will result in a
+ * new_rate as close as possible to target_rate (but not greater than
+ * target_rate) given the current (parent_rate, n, prescaled m)
+ * triple. Returns DPLL_MULT_UNDERFLOW in the event that the
+ * non-scaled m attempted to underflow, which can allow the calling
+ * function to bail out early; or 0 upon success.
+ */
+static int _dpll_test_mult(int *m, int n, unsigned long *new_rate,
+ unsigned long target_rate,
+ unsigned long parent_rate)
+{
+ int r = 0, carry = 0;
+
+ /* Unscale m and round if necessary */
+ if (*m % DPLL_SCALE_FACTOR >= DPLL_ROUNDING_VAL)
+ carry = 1;
+ *m = (*m / DPLL_SCALE_FACTOR) + carry;
+
+ /*
+ * The new rate must be <= the target rate to avoid programming
+ * a rate that is impossible for the hardware to handle
+ */
+ *new_rate = _dpll_compute_new_rate(parent_rate, *m, n);
+ if (*new_rate > target_rate) {
+ (*m)--;
+ *new_rate = 0;
+ }
+
+ /* Guard against m underflow */
+ if (*m < DPLL_MIN_MULTIPLIER) {
+ *m = DPLL_MIN_MULTIPLIER;
+ *new_rate = 0;
+ r = DPLL_MULT_UNDERFLOW;
+ }
+
+ if (*new_rate == 0)
+ *new_rate = _dpll_compute_new_rate(parent_rate, *m, n);
+
+ return r;
+}
+
+/**
+ * _omap2_dpll_is_in_bypass - check if DPLL is in bypass mode or not
+ * @v: bitfield value of the DPLL enable
+ *
+ * Checks given DPLL enable bitfield to see whether the DPLL is in bypass
+ * mode or not. Returns 1 if the DPLL is in bypass, 0 otherwise.
+ */
+static int _omap2_dpll_is_in_bypass(u32 v)
+{
+ u8 mask, val;
+
+ mask = ti_clk_get_features()->dpll_bypass_vals;
+
+ /*
+ * Each set bit in the mask corresponds to a bypass value equal
+ * to the bitshift. Go through each set-bit in the mask and
+ * compare against the given register value.
+ */
+ while (mask) {
+ val = __ffs(mask);
+ mask ^= (1 << val);
+ if (v == val)
+ return 1;
+ }
+
+ return 0;
+}
+
+/* Public functions */
+u8 omap2_init_dpll_parent(struct clk_hw *hw)
+{
+ struct clk_hw_omap *clk = to_clk_hw_omap(hw);
+ u32 v;
+ struct dpll_data *dd;
+
+ dd = clk->dpll_data;
+ if (!dd)
+ return -EINVAL;
+
+ v = ti_clk_ll_ops->clk_readl(dd->control_reg);
+ v &= dd->enable_mask;
+ v >>= __ffs(dd->enable_mask);
+
+ /* Reparent the struct clk in case the dpll is in bypass */
+ if (_omap2_dpll_is_in_bypass(v))
+ return 1;
+
+ return 0;
+}
+
+/**
+ * omap2_get_dpll_rate - returns the current DPLL CLKOUT rate
+ * @clk: struct clk * of a DPLL
+ *
+ * DPLLs can be locked or bypassed - basically, enabled or disabled.
+ * When locked, the DPLL output depends on the M and N values. When
+ * bypassed, on OMAP2xxx, the output rate is either the 32KiHz clock
+ * or sys_clk. Bypass rates on OMAP3 depend on the DPLL: DPLLs 1 and
+ * 2 are bypassed with dpll1_fclk and dpll2_fclk respectively
+ * (generated by DPLL3), while DPLL 3, 4, and 5 bypass rates are sys_clk.
+ * Returns the current DPLL CLKOUT rate (*not* CLKOUTX2) if the DPLL is
+ * locked, or the appropriate bypass rate if the DPLL is bypassed, or 0
+ * if the clock @clk is not a DPLL.
+ */
+unsigned long omap2_get_dpll_rate(struct clk_hw_omap *clk)
+{
+ long long dpll_clk;
+ u32 dpll_mult, dpll_div, v;
+ struct dpll_data *dd;
+
+ dd = clk->dpll_data;
+ if (!dd)
+ return 0;
+
+ /* Return bypass rate if DPLL is bypassed */
+ v = ti_clk_ll_ops->clk_readl(dd->control_reg);
+ v &= dd->enable_mask;
+ v >>= __ffs(dd->enable_mask);
+
+ if (_omap2_dpll_is_in_bypass(v))
+ return __clk_get_rate(dd->clk_bypass);
+
+ v = ti_clk_ll_ops->clk_readl(dd->mult_div1_reg);
+ dpll_mult = v & dd->mult_mask;
+ dpll_mult >>= __ffs(dd->mult_mask);
+ dpll_div = v & dd->div1_mask;
+ dpll_div >>= __ffs(dd->div1_mask);
+
+ dpll_clk = (long long)__clk_get_rate(dd->clk_ref) * dpll_mult;
+ do_div(dpll_clk, dpll_div + 1);
+
+ return dpll_clk;
+}
+
+/* DPLL rate rounding code */
+
+/**
+ * omap2_dpll_round_rate - round a target rate for an OMAP DPLL
+ * @clk: struct clk * for a DPLL
+ * @target_rate: desired DPLL clock rate
+ *
+ * Given a DPLL and a desired target rate, round the target rate to a
+ * possible, programmable rate for this DPLL. Attempts to select the
+ * minimum possible n. Stores the computed (m, n) in the DPLL's
+ * dpll_data structure so set_rate() will not need to call this
+ * (expensive) function again. Returns ~0 if the target rate cannot
+ * be rounded, or the rounded rate upon success.
+ */
+long omap2_dpll_round_rate(struct clk_hw *hw, unsigned long target_rate,
+ unsigned long *parent_rate)
+{
+ struct clk_hw_omap *clk = to_clk_hw_omap(hw);
+ int m, n, r, scaled_max_m;
+ int min_delta_m = INT_MAX, min_delta_n = INT_MAX;
+ unsigned long scaled_rt_rp;
+ unsigned long new_rate = 0;
+ struct dpll_data *dd;
+ unsigned long ref_rate;
+ long delta;
+ long prev_min_delta = LONG_MAX;
+ const char *clk_name;
+
+ if (!clk || !clk->dpll_data)
+ return ~0;
+
+ dd = clk->dpll_data;
+
+ ref_rate = __clk_get_rate(dd->clk_ref);
+ clk_name = __clk_get_name(hw->clk);
+ pr_debug("clock: %s: starting DPLL round_rate, target rate %lu\n",
+ clk_name, target_rate);
+
+ scaled_rt_rp = target_rate / (ref_rate / DPLL_SCALE_FACTOR);
+ scaled_max_m = dd->max_multiplier * DPLL_SCALE_FACTOR;
+
+ dd->last_rounded_rate = 0;
+
+ for (n = dd->min_divider; n <= dd->max_divider; n++) {
+ /* Is the (input clk, divider) pair valid for the DPLL? */
+ r = _dpll_test_fint(clk, n);
+ if (r == DPLL_FINT_UNDERFLOW)
+ break;
+ else if (r == DPLL_FINT_INVALID)
+ continue;
+
+ /* Compute the scaled DPLL multiplier, based on the divider */
+ m = scaled_rt_rp * n;
+
+ /*
+ * Since we're counting n up, a m overflow means we
+ * can bail out completely (since as n increases in
+ * the next iteration, there's no way that m can
+ * increase beyond the current m)
+ */
+ if (m > scaled_max_m)
+ break;
+
+ r = _dpll_test_mult(&m, n, &new_rate, target_rate,
+ ref_rate);
+
+ /* m can't be set low enough for this n - try with a larger n */
+ if (r == DPLL_MULT_UNDERFLOW)
+ continue;
+
+ /* skip rates above our target rate */
+ delta = target_rate - new_rate;
+ if (delta < 0)
+ continue;
+
+ if (delta < prev_min_delta) {
+ prev_min_delta = delta;
+ min_delta_m = m;
+ min_delta_n = n;
+ }
+
+ pr_debug("clock: %s: m = %d: n = %d: new_rate = %lu\n",
+ clk_name, m, n, new_rate);
+
+ if (delta == 0)
+ break;
+ }
+
+ if (prev_min_delta == LONG_MAX) {
+ pr_debug("clock: %s: cannot round to rate %lu\n",
+ clk_name, target_rate);
+ return ~0;
+ }
+
+ dd->last_rounded_m = min_delta_m;
+ dd->last_rounded_n = min_delta_n;
+ dd->last_rounded_rate = target_rate - prev_min_delta;
+
+ return dd->last_rounded_rate;
+}
diff --git a/drivers/clk/ti/clock.h b/drivers/clk/ti/clock.h
index 404158d..05ed10a 100644
--- a/drivers/clk/ti/clock.h
+++ b/drivers/clk/ti/clock.h
@@ -169,4 +169,6 @@ void ti_clk_patch_legacy_clks(struct ti_clk **patch);
struct clk *ti_clk_register_clk(struct ti_clk *setup);
int ti_clk_register_legacy_clks(struct ti_clk_alias *clks);
+u8 omap2_init_dpll_parent(struct clk_hw *hw);
+
#endif
diff --git a/include/linux/clk/ti.h b/include/linux/clk/ti.h
index b066835..f2436b2 100644
--- a/include/linux/clk/ti.h
+++ b/include/linux/clk/ti.h
@@ -286,7 +286,6 @@ long omap4_dpll_regm4xen_determine_rate(struct clk_hw *hw,
unsigned long max_rate,
unsigned long *best_parent_rate,
struct clk_hw **best_parent_clk);
-u8 omap2_init_dpll_parent(struct clk_hw *hw);
unsigned long omap3_dpll_recalc(struct clk_hw *hw, unsigned long parent_rate);
long omap2_dpll_round_rate(struct clk_hw *hw, unsigned long target_rate,
unsigned long *parent_rate);
--
1.7.9.5
^ permalink raw reply related [flat|nested] 120+ messages in thread
* [PATCHv2 02/27] clk: ti: move generic OMAP DPLL implementation under drivers/clk
@ 2015-05-11 8:54 ` Tero Kristo
0 siblings, 0 replies; 120+ messages in thread
From: Tero Kristo @ 2015-05-11 8:54 UTC (permalink / raw)
To: mturquette, tony, linux-omap, linux-clk, sboyd, paul; +Cc: linux-arm-kernel
With the legacy clock data now gone, we can start moving OMAP clock
type implementations under clock driver. Start this with moving the
generic OMAP DPLL clock type under TI clock driver.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
---
arch/arm/mach-omap2/Makefile | 2 +-
arch/arm/mach-omap2/clkt_dpll.c | 370 ---------------------------------------
drivers/clk/ti/Makefile | 3 +-
drivers/clk/ti/clkt_dpll.c | 369 ++++++++++++++++++++++++++++++++++++++
drivers/clk/ti/clock.h | 2 +
include/linux/clk/ti.h | 1 -
6 files changed, 374 insertions(+), 373 deletions(-)
delete mode 100644 arch/arm/mach-omap2/clkt_dpll.c
create mode 100644 drivers/clk/ti/clkt_dpll.c
diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
index ec002bd..fcb5d47 100644
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -13,7 +13,7 @@ obj-y := id.o io.o control.o mux.o devices.o fb.o serial.o timer.o pm.o \
hwmod-common = omap_hwmod.o omap_hwmod_reset.o \
omap_hwmod_common_data.o
clock-common = clock.o clock_common_data.o \
- clkt_dpll.o clkt_clksel.o
+ clkt_clksel.o
secure-common = omap-smc.o omap-secure.o
obj-$(CONFIG_ARCH_OMAP2) += $(omap-2-3-common) $(hwmod-common)
diff --git a/arch/arm/mach-omap2/clkt_dpll.c b/arch/arm/mach-omap2/clkt_dpll.c
deleted file mode 100644
index 82f0600..0000000
--- a/arch/arm/mach-omap2/clkt_dpll.c
+++ /dev/null
@@ -1,370 +0,0 @@
-/*
- * OMAP2/3/4 DPLL clock functions
- *
- * Copyright (C) 2005-2008 Texas Instruments, Inc.
- * Copyright (C) 2004-2010 Nokia Corporation
- *
- * Contacts:
- * Richard Woodruff <r-woodruff2@ti.com>
- * Paul Walmsley
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#undef DEBUG
-
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/clk-provider.h>
-#include <linux/io.h>
-
-#include <asm/div64.h>
-
-#include "clock.h"
-
-/* DPLL rate rounding: minimum DPLL multiplier, divider values */
-#define DPLL_MIN_MULTIPLIER 2
-#define DPLL_MIN_DIVIDER 1
-
-/* Possible error results from _dpll_test_mult */
-#define DPLL_MULT_UNDERFLOW -1
-
-/*
- * Scale factor to mitigate roundoff errors in DPLL rate rounding.
- * The higher the scale factor, the greater the risk of arithmetic overflow,
- * but the closer the rounded rate to the target rate. DPLL_SCALE_FACTOR
- * must be a power of DPLL_SCALE_BASE.
- */
-#define DPLL_SCALE_FACTOR 64
-#define DPLL_SCALE_BASE 2
-#define DPLL_ROUNDING_VAL ((DPLL_SCALE_BASE / 2) * \
- (DPLL_SCALE_FACTOR / DPLL_SCALE_BASE))
-
-/*
- * DPLL valid Fint frequency range for OMAP36xx and OMAP4xxx.
- * From device data manual section 4.3 "DPLL and DLL Specifications".
- */
-#define OMAP3PLUS_DPLL_FINT_JTYPE_MIN 500000
-#define OMAP3PLUS_DPLL_FINT_JTYPE_MAX 2500000
-
-/* _dpll_test_fint() return codes */
-#define DPLL_FINT_UNDERFLOW -1
-#define DPLL_FINT_INVALID -2
-
-/* Private functions */
-
-/*
- * _dpll_test_fint - test whether an Fint value is valid for the DPLL
- * @clk: DPLL struct clk to test
- * @n: divider value (N) to test
- *
- * Tests whether a particular divider @n will result in a valid DPLL
- * internal clock frequency Fint. See the 34xx TRM 4.7.6.2 "DPLL Jitter
- * Correction". Returns 0 if OK, -1 if the enclosing loop can terminate
- * (assuming that it is counting N upwards), or -2 if the enclosing loop
- * should skip to the next iteration (again assuming N is increasing).
- */
-static int _dpll_test_fint(struct clk_hw_omap *clk, unsigned int n)
-{
- struct dpll_data *dd;
- long fint, fint_min, fint_max;
- int ret = 0;
-
- dd = clk->dpll_data;
-
- /* DPLL divider must result in a valid jitter correction val */
- fint = __clk_get_rate(__clk_get_parent(clk->hw.clk)) / n;
-
- if (dd->flags & DPLL_J_TYPE) {
- fint_min = OMAP3PLUS_DPLL_FINT_JTYPE_MIN;
- fint_max = OMAP3PLUS_DPLL_FINT_JTYPE_MAX;
- } else {
- fint_min = ti_clk_get_features()->fint_min;
- fint_max = ti_clk_get_features()->fint_max;
- }
-
- if (!fint_min || !fint_max) {
- WARN(1, "No fint limits available!\n");
- return DPLL_FINT_INVALID;
- }
-
- if (fint < ti_clk_get_features()->fint_min) {
- pr_debug("rejecting n=%d due to Fint failure, lowering max_divider\n",
- n);
- dd->max_divider = n;
- ret = DPLL_FINT_UNDERFLOW;
- } else if (fint > ti_clk_get_features()->fint_max) {
- pr_debug("rejecting n=%d due to Fint failure, boosting min_divider\n",
- n);
- dd->min_divider = n;
- ret = DPLL_FINT_INVALID;
- } else if (fint > ti_clk_get_features()->fint_band1_max &&
- fint < ti_clk_get_features()->fint_band2_min) {
- pr_debug("rejecting n=%d due to Fint failure\n", n);
- ret = DPLL_FINT_INVALID;
- }
-
- return ret;
-}
-
-static unsigned long _dpll_compute_new_rate(unsigned long parent_rate,
- unsigned int m, unsigned int n)
-{
- unsigned long long num;
-
- num = (unsigned long long)parent_rate * m;
- do_div(num, n);
- return num;
-}
-
-/*
- * _dpll_test_mult - test a DPLL multiplier value
- * @m: pointer to the DPLL m (multiplier) value under test
- * @n: current DPLL n (divider) value under test
- * @new_rate: pointer to storage for the resulting rounded rate
- * @target_rate: the desired DPLL rate
- * @parent_rate: the DPLL's parent clock rate
- *
- * This code tests a DPLL multiplier value, ensuring that the
- * resulting rate will not be higher than the target_rate, and that
- * the multiplier value itself is valid for the DPLL. Initially, the
- * integer pointed to by the m argument should be prescaled by
- * multiplying by DPLL_SCALE_FACTOR. The code will replace this with
- * a non-scaled m upon return. This non-scaled m will result in a
- * new_rate as close as possible to target_rate (but not greater than
- * target_rate) given the current (parent_rate, n, prescaled m)
- * triple. Returns DPLL_MULT_UNDERFLOW in the event that the
- * non-scaled m attempted to underflow, which can allow the calling
- * function to bail out early; or 0 upon success.
- */
-static int _dpll_test_mult(int *m, int n, unsigned long *new_rate,
- unsigned long target_rate,
- unsigned long parent_rate)
-{
- int r = 0, carry = 0;
-
- /* Unscale m and round if necessary */
- if (*m % DPLL_SCALE_FACTOR >= DPLL_ROUNDING_VAL)
- carry = 1;
- *m = (*m / DPLL_SCALE_FACTOR) + carry;
-
- /*
- * The new rate must be <= the target rate to avoid programming
- * a rate that is impossible for the hardware to handle
- */
- *new_rate = _dpll_compute_new_rate(parent_rate, *m, n);
- if (*new_rate > target_rate) {
- (*m)--;
- *new_rate = 0;
- }
-
- /* Guard against m underflow */
- if (*m < DPLL_MIN_MULTIPLIER) {
- *m = DPLL_MIN_MULTIPLIER;
- *new_rate = 0;
- r = DPLL_MULT_UNDERFLOW;
- }
-
- if (*new_rate == 0)
- *new_rate = _dpll_compute_new_rate(parent_rate, *m, n);
-
- return r;
-}
-
-/**
- * _omap2_dpll_is_in_bypass - check if DPLL is in bypass mode or not
- * @v: bitfield value of the DPLL enable
- *
- * Checks given DPLL enable bitfield to see whether the DPLL is in bypass
- * mode or not. Returns 1 if the DPLL is in bypass, 0 otherwise.
- */
-static int _omap2_dpll_is_in_bypass(u32 v)
-{
- u8 mask, val;
-
- mask = ti_clk_get_features()->dpll_bypass_vals;
-
- /*
- * Each set bit in the mask corresponds to a bypass value equal
- * to the bitshift. Go through each set-bit in the mask and
- * compare against the given register value.
- */
- while (mask) {
- val = __ffs(mask);
- mask ^= (1 << val);
- if (v == val)
- return 1;
- }
-
- return 0;
-}
-
-/* Public functions */
-u8 omap2_init_dpll_parent(struct clk_hw *hw)
-{
- struct clk_hw_omap *clk = to_clk_hw_omap(hw);
- u32 v;
- struct dpll_data *dd;
-
- dd = clk->dpll_data;
- if (!dd)
- return -EINVAL;
-
- v = omap2_clk_readl(clk, dd->control_reg);
- v &= dd->enable_mask;
- v >>= __ffs(dd->enable_mask);
-
- /* Reparent the struct clk in case the dpll is in bypass */
- if (_omap2_dpll_is_in_bypass(v))
- return 1;
-
- return 0;
-}
-
-/**
- * omap2_get_dpll_rate - returns the current DPLL CLKOUT rate
- * @clk: struct clk * of a DPLL
- *
- * DPLLs can be locked or bypassed - basically, enabled or disabled.
- * When locked, the DPLL output depends on the M and N values. When
- * bypassed, on OMAP2xxx, the output rate is either the 32KiHz clock
- * or sys_clk. Bypass rates on OMAP3 depend on the DPLL: DPLLs 1 and
- * 2 are bypassed with dpll1_fclk and dpll2_fclk respectively
- * (generated by DPLL3), while DPLL 3, 4, and 5 bypass rates are sys_clk.
- * Returns the current DPLL CLKOUT rate (*not* CLKOUTX2) if the DPLL is
- * locked, or the appropriate bypass rate if the DPLL is bypassed, or 0
- * if the clock @clk is not a DPLL.
- */
-unsigned long omap2_get_dpll_rate(struct clk_hw_omap *clk)
-{
- long long dpll_clk;
- u32 dpll_mult, dpll_div, v;
- struct dpll_data *dd;
-
- dd = clk->dpll_data;
- if (!dd)
- return 0;
-
- /* Return bypass rate if DPLL is bypassed */
- v = omap2_clk_readl(clk, dd->control_reg);
- v &= dd->enable_mask;
- v >>= __ffs(dd->enable_mask);
-
- if (_omap2_dpll_is_in_bypass(v))
- return __clk_get_rate(dd->clk_bypass);
-
- v = omap2_clk_readl(clk, dd->mult_div1_reg);
- dpll_mult = v & dd->mult_mask;
- dpll_mult >>= __ffs(dd->mult_mask);
- dpll_div = v & dd->div1_mask;
- dpll_div >>= __ffs(dd->div1_mask);
-
- dpll_clk = (long long) __clk_get_rate(dd->clk_ref) * dpll_mult;
- do_div(dpll_clk, dpll_div + 1);
-
- return dpll_clk;
-}
-
-/* DPLL rate rounding code */
-
-/**
- * omap2_dpll_round_rate - round a target rate for an OMAP DPLL
- * @clk: struct clk * for a DPLL
- * @target_rate: desired DPLL clock rate
- *
- * Given a DPLL and a desired target rate, round the target rate to a
- * possible, programmable rate for this DPLL. Attempts to select the
- * minimum possible n. Stores the computed (m, n) in the DPLL's
- * dpll_data structure so set_rate() will not need to call this
- * (expensive) function again. Returns ~0 if the target rate cannot
- * be rounded, or the rounded rate upon success.
- */
-long omap2_dpll_round_rate(struct clk_hw *hw, unsigned long target_rate,
- unsigned long *parent_rate)
-{
- struct clk_hw_omap *clk = to_clk_hw_omap(hw);
- int m, n, r, scaled_max_m;
- int min_delta_m = INT_MAX, min_delta_n = INT_MAX;
- unsigned long scaled_rt_rp;
- unsigned long new_rate = 0;
- struct dpll_data *dd;
- unsigned long ref_rate;
- long delta;
- long prev_min_delta = LONG_MAX;
- const char *clk_name;
-
- if (!clk || !clk->dpll_data)
- return ~0;
-
- dd = clk->dpll_data;
-
- ref_rate = __clk_get_rate(dd->clk_ref);
- clk_name = __clk_get_name(hw->clk);
- pr_debug("clock: %s: starting DPLL round_rate, target rate %lu\n",
- clk_name, target_rate);
-
- scaled_rt_rp = target_rate / (ref_rate / DPLL_SCALE_FACTOR);
- scaled_max_m = dd->max_multiplier * DPLL_SCALE_FACTOR;
-
- dd->last_rounded_rate = 0;
-
- for (n = dd->min_divider; n <= dd->max_divider; n++) {
-
- /* Is the (input clk, divider) pair valid for the DPLL? */
- r = _dpll_test_fint(clk, n);
- if (r == DPLL_FINT_UNDERFLOW)
- break;
- else if (r == DPLL_FINT_INVALID)
- continue;
-
- /* Compute the scaled DPLL multiplier, based on the divider */
- m = scaled_rt_rp * n;
-
- /*
- * Since we're counting n up, a m overflow means we
- * can bail out completely (since as n increases in
- * the next iteration, there's no way that m can
- * increase beyond the current m)
- */
- if (m > scaled_max_m)
- break;
-
- r = _dpll_test_mult(&m, n, &new_rate, target_rate,
- ref_rate);
-
- /* m can't be set low enough for this n - try with a larger n */
- if (r == DPLL_MULT_UNDERFLOW)
- continue;
-
- /* skip rates above our target rate */
- delta = target_rate - new_rate;
- if (delta < 0)
- continue;
-
- if (delta < prev_min_delta) {
- prev_min_delta = delta;
- min_delta_m = m;
- min_delta_n = n;
- }
-
- pr_debug("clock: %s: m = %d: n = %d: new_rate = %lu\n",
- clk_name, m, n, new_rate);
-
- if (delta == 0)
- break;
- }
-
- if (prev_min_delta == LONG_MAX) {
- pr_debug("clock: %s: cannot round to rate %lu\n",
- clk_name, target_rate);
- return ~0;
- }
-
- dd->last_rounded_m = min_delta_m;
- dd->last_rounded_n = min_delta_n;
- dd->last_rounded_rate = target_rate - prev_min_delta;
-
- return dd->last_rounded_rate;
-}
-
diff --git a/drivers/clk/ti/Makefile b/drivers/clk/ti/Makefile
index 105ffd0..62dae2a 100644
--- a/drivers/clk/ti/Makefile
+++ b/drivers/clk/ti/Makefile
@@ -1,6 +1,7 @@
obj-y += clk.o autoidle.o clockdomain.o
clk-common = dpll.o composite.o divider.o gate.o \
- fixed-factor.o mux.o apll.o
+ fixed-factor.o mux.o apll.o \
+ clkt_dpll.o
obj-$(CONFIG_SOC_AM33XX) += $(clk-common) clk-33xx.o
obj-$(CONFIG_SOC_TI81XX) += $(clk-common) fapll.o clk-816x.o
obj-$(CONFIG_ARCH_OMAP2) += $(clk-common) interface.o clk-2xxx.o
diff --git a/drivers/clk/ti/clkt_dpll.c b/drivers/clk/ti/clkt_dpll.c
new file mode 100644
index 0000000..a01fc7f
--- /dev/null
+++ b/drivers/clk/ti/clkt_dpll.c
@@ -0,0 +1,369 @@
+/*
+ * OMAP2/3/4 DPLL clock functions
+ *
+ * Copyright (C) 2005-2008 Texas Instruments, Inc.
+ * Copyright (C) 2004-2010 Nokia Corporation
+ *
+ * Contacts:
+ * Richard Woodruff <r-woodruff2@ti.com>
+ * Paul Walmsley
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#undef DEBUG
+
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/clk-provider.h>
+#include <linux/io.h>
+#include <linux/clk/ti.h>
+
+#include <asm/div64.h>
+
+#include "clock.h"
+
+/* DPLL rate rounding: minimum DPLL multiplier, divider values */
+#define DPLL_MIN_MULTIPLIER 2
+#define DPLL_MIN_DIVIDER 1
+
+/* Possible error results from _dpll_test_mult */
+#define DPLL_MULT_UNDERFLOW -1
+
+/*
+ * Scale factor to mitigate roundoff errors in DPLL rate rounding.
+ * The higher the scale factor, the greater the risk of arithmetic overflow,
+ * but the closer the rounded rate to the target rate. DPLL_SCALE_FACTOR
+ * must be a power of DPLL_SCALE_BASE.
+ */
+#define DPLL_SCALE_FACTOR 64
+#define DPLL_SCALE_BASE 2
+#define DPLL_ROUNDING_VAL ((DPLL_SCALE_BASE / 2) * \
+ (DPLL_SCALE_FACTOR / DPLL_SCALE_BASE))
+
+/*
+ * DPLL valid Fint frequency range for OMAP36xx and OMAP4xxx.
+ * From device data manual section 4.3 "DPLL and DLL Specifications".
+ */
+#define OMAP3PLUS_DPLL_FINT_JTYPE_MIN 500000
+#define OMAP3PLUS_DPLL_FINT_JTYPE_MAX 2500000
+
+/* _dpll_test_fint() return codes */
+#define DPLL_FINT_UNDERFLOW -1
+#define DPLL_FINT_INVALID -2
+
+/* Private functions */
+
+/*
+ * _dpll_test_fint - test whether an Fint value is valid for the DPLL
+ * @clk: DPLL struct clk to test
+ * @n: divider value (N) to test
+ *
+ * Tests whether a particular divider @n will result in a valid DPLL
+ * internal clock frequency Fint. See the 34xx TRM 4.7.6.2 "DPLL Jitter
+ * Correction". Returns 0 if OK, -1 if the enclosing loop can terminate
+ * (assuming that it is counting N upwards), or -2 if the enclosing loop
+ * should skip to the next iteration (again assuming N is increasing).
+ */
+static int _dpll_test_fint(struct clk_hw_omap *clk, unsigned int n)
+{
+ struct dpll_data *dd;
+ long fint, fint_min, fint_max;
+ int ret = 0;
+
+ dd = clk->dpll_data;
+
+ /* DPLL divider must result in a valid jitter correction val */
+ fint = __clk_get_rate(__clk_get_parent(clk->hw.clk)) / n;
+
+ if (dd->flags & DPLL_J_TYPE) {
+ fint_min = OMAP3PLUS_DPLL_FINT_JTYPE_MIN;
+ fint_max = OMAP3PLUS_DPLL_FINT_JTYPE_MAX;
+ } else {
+ fint_min = ti_clk_get_features()->fint_min;
+ fint_max = ti_clk_get_features()->fint_max;
+ }
+
+ if (!fint_min || !fint_max) {
+ WARN(1, "No fint limits available!\n");
+ return DPLL_FINT_INVALID;
+ }
+
+ if (fint < ti_clk_get_features()->fint_min) {
+ pr_debug("rejecting n=%d due to Fint failure, lowering max_divider\n",
+ n);
+ dd->max_divider = n;
+ ret = DPLL_FINT_UNDERFLOW;
+ } else if (fint > ti_clk_get_features()->fint_max) {
+ pr_debug("rejecting n=%d due to Fint failure, boosting min_divider\n",
+ n);
+ dd->min_divider = n;
+ ret = DPLL_FINT_INVALID;
+ } else if (fint > ti_clk_get_features()->fint_band1_max &&
+ fint < ti_clk_get_features()->fint_band2_min) {
+ pr_debug("rejecting n=%d due to Fint failure\n", n);
+ ret = DPLL_FINT_INVALID;
+ }
+
+ return ret;
+}
+
+static unsigned long _dpll_compute_new_rate(unsigned long parent_rate,
+ unsigned int m, unsigned int n)
+{
+ unsigned long long num;
+
+ num = (unsigned long long)parent_rate * m;
+ do_div(num, n);
+ return num;
+}
+
+/*
+ * _dpll_test_mult - test a DPLL multiplier value
+ * @m: pointer to the DPLL m (multiplier) value under test
+ * @n: current DPLL n (divider) value under test
+ * @new_rate: pointer to storage for the resulting rounded rate
+ * @target_rate: the desired DPLL rate
+ * @parent_rate: the DPLL's parent clock rate
+ *
+ * This code tests a DPLL multiplier value, ensuring that the
+ * resulting rate will not be higher than the target_rate, and that
+ * the multiplier value itself is valid for the DPLL. Initially, the
+ * integer pointed to by the m argument should be prescaled by
+ * multiplying by DPLL_SCALE_FACTOR. The code will replace this with
+ * a non-scaled m upon return. This non-scaled m will result in a
+ * new_rate as close as possible to target_rate (but not greater than
+ * target_rate) given the current (parent_rate, n, prescaled m)
+ * triple. Returns DPLL_MULT_UNDERFLOW in the event that the
+ * non-scaled m attempted to underflow, which can allow the calling
+ * function to bail out early; or 0 upon success.
+ */
+static int _dpll_test_mult(int *m, int n, unsigned long *new_rate,
+ unsigned long target_rate,
+ unsigned long parent_rate)
+{
+ int r = 0, carry = 0;
+
+ /* Unscale m and round if necessary */
+ if (*m % DPLL_SCALE_FACTOR >= DPLL_ROUNDING_VAL)
+ carry = 1;
+ *m = (*m / DPLL_SCALE_FACTOR) + carry;
+
+ /*
+ * The new rate must be <= the target rate to avoid programming
+ * a rate that is impossible for the hardware to handle
+ */
+ *new_rate = _dpll_compute_new_rate(parent_rate, *m, n);
+ if (*new_rate > target_rate) {
+ (*m)--;
+ *new_rate = 0;
+ }
+
+ /* Guard against m underflow */
+ if (*m < DPLL_MIN_MULTIPLIER) {
+ *m = DPLL_MIN_MULTIPLIER;
+ *new_rate = 0;
+ r = DPLL_MULT_UNDERFLOW;
+ }
+
+ if (*new_rate == 0)
+ *new_rate = _dpll_compute_new_rate(parent_rate, *m, n);
+
+ return r;
+}
+
+/**
+ * _omap2_dpll_is_in_bypass - check if DPLL is in bypass mode or not
+ * @v: bitfield value of the DPLL enable
+ *
+ * Checks given DPLL enable bitfield to see whether the DPLL is in bypass
+ * mode or not. Returns 1 if the DPLL is in bypass, 0 otherwise.
+ */
+static int _omap2_dpll_is_in_bypass(u32 v)
+{
+ u8 mask, val;
+
+ mask = ti_clk_get_features()->dpll_bypass_vals;
+
+ /*
+ * Each set bit in the mask corresponds to a bypass value equal
+ * to the bitshift. Go through each set-bit in the mask and
+ * compare against the given register value.
+ */
+ while (mask) {
+ val = __ffs(mask);
+ mask ^= (1 << val);
+ if (v == val)
+ return 1;
+ }
+
+ return 0;
+}
+
+/* Public functions */
+u8 omap2_init_dpll_parent(struct clk_hw *hw)
+{
+ struct clk_hw_omap *clk = to_clk_hw_omap(hw);
+ u32 v;
+ struct dpll_data *dd;
+
+ dd = clk->dpll_data;
+ if (!dd)
+ return -EINVAL;
+
+ v = ti_clk_ll_ops->clk_readl(dd->control_reg);
+ v &= dd->enable_mask;
+ v >>= __ffs(dd->enable_mask);
+
+ /* Reparent the struct clk in case the dpll is in bypass */
+ if (_omap2_dpll_is_in_bypass(v))
+ return 1;
+
+ return 0;
+}
+
+/**
+ * omap2_get_dpll_rate - returns the current DPLL CLKOUT rate
+ * @clk: struct clk * of a DPLL
+ *
+ * DPLLs can be locked or bypassed - basically, enabled or disabled.
+ * When locked, the DPLL output depends on the M and N values. When
+ * bypassed, on OMAP2xxx, the output rate is either the 32KiHz clock
+ * or sys_clk. Bypass rates on OMAP3 depend on the DPLL: DPLLs 1 and
+ * 2 are bypassed with dpll1_fclk and dpll2_fclk respectively
+ * (generated by DPLL3), while DPLL 3, 4, and 5 bypass rates are sys_clk.
+ * Returns the current DPLL CLKOUT rate (*not* CLKOUTX2) if the DPLL is
+ * locked, or the appropriate bypass rate if the DPLL is bypassed, or 0
+ * if the clock @clk is not a DPLL.
+ */
+unsigned long omap2_get_dpll_rate(struct clk_hw_omap *clk)
+{
+ long long dpll_clk;
+ u32 dpll_mult, dpll_div, v;
+ struct dpll_data *dd;
+
+ dd = clk->dpll_data;
+ if (!dd)
+ return 0;
+
+ /* Return bypass rate if DPLL is bypassed */
+ v = ti_clk_ll_ops->clk_readl(dd->control_reg);
+ v &= dd->enable_mask;
+ v >>= __ffs(dd->enable_mask);
+
+ if (_omap2_dpll_is_in_bypass(v))
+ return __clk_get_rate(dd->clk_bypass);
+
+ v = ti_clk_ll_ops->clk_readl(dd->mult_div1_reg);
+ dpll_mult = v & dd->mult_mask;
+ dpll_mult >>= __ffs(dd->mult_mask);
+ dpll_div = v & dd->div1_mask;
+ dpll_div >>= __ffs(dd->div1_mask);
+
+ dpll_clk = (long long)__clk_get_rate(dd->clk_ref) * dpll_mult;
+ do_div(dpll_clk, dpll_div + 1);
+
+ return dpll_clk;
+}
+
+/* DPLL rate rounding code */
+
+/**
+ * omap2_dpll_round_rate - round a target rate for an OMAP DPLL
+ * @clk: struct clk * for a DPLL
+ * @target_rate: desired DPLL clock rate
+ *
+ * Given a DPLL and a desired target rate, round the target rate to a
+ * possible, programmable rate for this DPLL. Attempts to select the
+ * minimum possible n. Stores the computed (m, n) in the DPLL's
+ * dpll_data structure so set_rate() will not need to call this
+ * (expensive) function again. Returns ~0 if the target rate cannot
+ * be rounded, or the rounded rate upon success.
+ */
+long omap2_dpll_round_rate(struct clk_hw *hw, unsigned long target_rate,
+ unsigned long *parent_rate)
+{
+ struct clk_hw_omap *clk = to_clk_hw_omap(hw);
+ int m, n, r, scaled_max_m;
+ int min_delta_m = INT_MAX, min_delta_n = INT_MAX;
+ unsigned long scaled_rt_rp;
+ unsigned long new_rate = 0;
+ struct dpll_data *dd;
+ unsigned long ref_rate;
+ long delta;
+ long prev_min_delta = LONG_MAX;
+ const char *clk_name;
+
+ if (!clk || !clk->dpll_data)
+ return ~0;
+
+ dd = clk->dpll_data;
+
+ ref_rate = __clk_get_rate(dd->clk_ref);
+ clk_name = __clk_get_name(hw->clk);
+ pr_debug("clock: %s: starting DPLL round_rate, target rate %lu\n",
+ clk_name, target_rate);
+
+ scaled_rt_rp = target_rate / (ref_rate / DPLL_SCALE_FACTOR);
+ scaled_max_m = dd->max_multiplier * DPLL_SCALE_FACTOR;
+
+ dd->last_rounded_rate = 0;
+
+ for (n = dd->min_divider; n <= dd->max_divider; n++) {
+ /* Is the (input clk, divider) pair valid for the DPLL? */
+ r = _dpll_test_fint(clk, n);
+ if (r == DPLL_FINT_UNDERFLOW)
+ break;
+ else if (r == DPLL_FINT_INVALID)
+ continue;
+
+ /* Compute the scaled DPLL multiplier, based on the divider */
+ m = scaled_rt_rp * n;
+
+ /*
+ * Since we're counting n up, a m overflow means we
+ * can bail out completely (since as n increases in
+ * the next iteration, there's no way that m can
+ * increase beyond the current m)
+ */
+ if (m > scaled_max_m)
+ break;
+
+ r = _dpll_test_mult(&m, n, &new_rate, target_rate,
+ ref_rate);
+
+ /* m can't be set low enough for this n - try with a larger n */
+ if (r == DPLL_MULT_UNDERFLOW)
+ continue;
+
+ /* skip rates above our target rate */
+ delta = target_rate - new_rate;
+ if (delta < 0)
+ continue;
+
+ if (delta < prev_min_delta) {
+ prev_min_delta = delta;
+ min_delta_m = m;
+ min_delta_n = n;
+ }
+
+ pr_debug("clock: %s: m = %d: n = %d: new_rate = %lu\n",
+ clk_name, m, n, new_rate);
+
+ if (delta == 0)
+ break;
+ }
+
+ if (prev_min_delta == LONG_MAX) {
+ pr_debug("clock: %s: cannot round to rate %lu\n",
+ clk_name, target_rate);
+ return ~0;
+ }
+
+ dd->last_rounded_m = min_delta_m;
+ dd->last_rounded_n = min_delta_n;
+ dd->last_rounded_rate = target_rate - prev_min_delta;
+
+ return dd->last_rounded_rate;
+}
diff --git a/drivers/clk/ti/clock.h b/drivers/clk/ti/clock.h
index 404158d..05ed10a 100644
--- a/drivers/clk/ti/clock.h
+++ b/drivers/clk/ti/clock.h
@@ -169,4 +169,6 @@ void ti_clk_patch_legacy_clks(struct ti_clk **patch);
struct clk *ti_clk_register_clk(struct ti_clk *setup);
int ti_clk_register_legacy_clks(struct ti_clk_alias *clks);
+u8 omap2_init_dpll_parent(struct clk_hw *hw);
+
#endif
diff --git a/include/linux/clk/ti.h b/include/linux/clk/ti.h
index b066835..f2436b2 100644
--- a/include/linux/clk/ti.h
+++ b/include/linux/clk/ti.h
@@ -286,7 +286,6 @@ long omap4_dpll_regm4xen_determine_rate(struct clk_hw *hw,
unsigned long max_rate,
unsigned long *best_parent_rate,
struct clk_hw **best_parent_clk);
-u8 omap2_init_dpll_parent(struct clk_hw *hw);
unsigned long omap3_dpll_recalc(struct clk_hw *hw, unsigned long parent_rate);
long omap2_dpll_round_rate(struct clk_hw *hw, unsigned long target_rate,
unsigned long *parent_rate);
--
1.7.9.5
^ permalink raw reply related [flat|nested] 120+ messages in thread
* [PATCHv2 02/27] clk: ti: move generic OMAP DPLL implementation under drivers/clk
@ 2015-05-11 8:54 ` Tero Kristo
0 siblings, 0 replies; 120+ messages in thread
From: Tero Kristo @ 2015-05-11 8:54 UTC (permalink / raw)
To: linux-arm-kernel
With the legacy clock data now gone, we can start moving OMAP clock
type implementations under clock driver. Start this with moving the
generic OMAP DPLL clock type under TI clock driver.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
---
arch/arm/mach-omap2/Makefile | 2 +-
arch/arm/mach-omap2/clkt_dpll.c | 370 ---------------------------------------
drivers/clk/ti/Makefile | 3 +-
drivers/clk/ti/clkt_dpll.c | 369 ++++++++++++++++++++++++++++++++++++++
drivers/clk/ti/clock.h | 2 +
include/linux/clk/ti.h | 1 -
6 files changed, 374 insertions(+), 373 deletions(-)
delete mode 100644 arch/arm/mach-omap2/clkt_dpll.c
create mode 100644 drivers/clk/ti/clkt_dpll.c
diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
index ec002bd..fcb5d47 100644
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -13,7 +13,7 @@ obj-y := id.o io.o control.o mux.o devices.o fb.o serial.o timer.o pm.o \
hwmod-common = omap_hwmod.o omap_hwmod_reset.o \
omap_hwmod_common_data.o
clock-common = clock.o clock_common_data.o \
- clkt_dpll.o clkt_clksel.o
+ clkt_clksel.o
secure-common = omap-smc.o omap-secure.o
obj-$(CONFIG_ARCH_OMAP2) += $(omap-2-3-common) $(hwmod-common)
diff --git a/arch/arm/mach-omap2/clkt_dpll.c b/arch/arm/mach-omap2/clkt_dpll.c
deleted file mode 100644
index 82f0600..0000000
--- a/arch/arm/mach-omap2/clkt_dpll.c
+++ /dev/null
@@ -1,370 +0,0 @@
-/*
- * OMAP2/3/4 DPLL clock functions
- *
- * Copyright (C) 2005-2008 Texas Instruments, Inc.
- * Copyright (C) 2004-2010 Nokia Corporation
- *
- * Contacts:
- * Richard Woodruff <r-woodruff2@ti.com>
- * Paul Walmsley
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#undef DEBUG
-
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/clk-provider.h>
-#include <linux/io.h>
-
-#include <asm/div64.h>
-
-#include "clock.h"
-
-/* DPLL rate rounding: minimum DPLL multiplier, divider values */
-#define DPLL_MIN_MULTIPLIER 2
-#define DPLL_MIN_DIVIDER 1
-
-/* Possible error results from _dpll_test_mult */
-#define DPLL_MULT_UNDERFLOW -1
-
-/*
- * Scale factor to mitigate roundoff errors in DPLL rate rounding.
- * The higher the scale factor, the greater the risk of arithmetic overflow,
- * but the closer the rounded rate to the target rate. DPLL_SCALE_FACTOR
- * must be a power of DPLL_SCALE_BASE.
- */
-#define DPLL_SCALE_FACTOR 64
-#define DPLL_SCALE_BASE 2
-#define DPLL_ROUNDING_VAL ((DPLL_SCALE_BASE / 2) * \
- (DPLL_SCALE_FACTOR / DPLL_SCALE_BASE))
-
-/*
- * DPLL valid Fint frequency range for OMAP36xx and OMAP4xxx.
- * From device data manual section 4.3 "DPLL and DLL Specifications".
- */
-#define OMAP3PLUS_DPLL_FINT_JTYPE_MIN 500000
-#define OMAP3PLUS_DPLL_FINT_JTYPE_MAX 2500000
-
-/* _dpll_test_fint() return codes */
-#define DPLL_FINT_UNDERFLOW -1
-#define DPLL_FINT_INVALID -2
-
-/* Private functions */
-
-/*
- * _dpll_test_fint - test whether an Fint value is valid for the DPLL
- * @clk: DPLL struct clk to test
- * @n: divider value (N) to test
- *
- * Tests whether a particular divider @n will result in a valid DPLL
- * internal clock frequency Fint. See the 34xx TRM 4.7.6.2 "DPLL Jitter
- * Correction". Returns 0 if OK, -1 if the enclosing loop can terminate
- * (assuming that it is counting N upwards), or -2 if the enclosing loop
- * should skip to the next iteration (again assuming N is increasing).
- */
-static int _dpll_test_fint(struct clk_hw_omap *clk, unsigned int n)
-{
- struct dpll_data *dd;
- long fint, fint_min, fint_max;
- int ret = 0;
-
- dd = clk->dpll_data;
-
- /* DPLL divider must result in a valid jitter correction val */
- fint = __clk_get_rate(__clk_get_parent(clk->hw.clk)) / n;
-
- if (dd->flags & DPLL_J_TYPE) {
- fint_min = OMAP3PLUS_DPLL_FINT_JTYPE_MIN;
- fint_max = OMAP3PLUS_DPLL_FINT_JTYPE_MAX;
- } else {
- fint_min = ti_clk_get_features()->fint_min;
- fint_max = ti_clk_get_features()->fint_max;
- }
-
- if (!fint_min || !fint_max) {
- WARN(1, "No fint limits available!\n");
- return DPLL_FINT_INVALID;
- }
-
- if (fint < ti_clk_get_features()->fint_min) {
- pr_debug("rejecting n=%d due to Fint failure, lowering max_divider\n",
- n);
- dd->max_divider = n;
- ret = DPLL_FINT_UNDERFLOW;
- } else if (fint > ti_clk_get_features()->fint_max) {
- pr_debug("rejecting n=%d due to Fint failure, boosting min_divider\n",
- n);
- dd->min_divider = n;
- ret = DPLL_FINT_INVALID;
- } else if (fint > ti_clk_get_features()->fint_band1_max &&
- fint < ti_clk_get_features()->fint_band2_min) {
- pr_debug("rejecting n=%d due to Fint failure\n", n);
- ret = DPLL_FINT_INVALID;
- }
-
- return ret;
-}
-
-static unsigned long _dpll_compute_new_rate(unsigned long parent_rate,
- unsigned int m, unsigned int n)
-{
- unsigned long long num;
-
- num = (unsigned long long)parent_rate * m;
- do_div(num, n);
- return num;
-}
-
-/*
- * _dpll_test_mult - test a DPLL multiplier value
- * @m: pointer to the DPLL m (multiplier) value under test
- * @n: current DPLL n (divider) value under test
- * @new_rate: pointer to storage for the resulting rounded rate
- * @target_rate: the desired DPLL rate
- * @parent_rate: the DPLL's parent clock rate
- *
- * This code tests a DPLL multiplier value, ensuring that the
- * resulting rate will not be higher than the target_rate, and that
- * the multiplier value itself is valid for the DPLL. Initially, the
- * integer pointed to by the m argument should be prescaled by
- * multiplying by DPLL_SCALE_FACTOR. The code will replace this with
- * a non-scaled m upon return. This non-scaled m will result in a
- * new_rate as close as possible to target_rate (but not greater than
- * target_rate) given the current (parent_rate, n, prescaled m)
- * triple. Returns DPLL_MULT_UNDERFLOW in the event that the
- * non-scaled m attempted to underflow, which can allow the calling
- * function to bail out early; or 0 upon success.
- */
-static int _dpll_test_mult(int *m, int n, unsigned long *new_rate,
- unsigned long target_rate,
- unsigned long parent_rate)
-{
- int r = 0, carry = 0;
-
- /* Unscale m and round if necessary */
- if (*m % DPLL_SCALE_FACTOR >= DPLL_ROUNDING_VAL)
- carry = 1;
- *m = (*m / DPLL_SCALE_FACTOR) + carry;
-
- /*
- * The new rate must be <= the target rate to avoid programming
- * a rate that is impossible for the hardware to handle
- */
- *new_rate = _dpll_compute_new_rate(parent_rate, *m, n);
- if (*new_rate > target_rate) {
- (*m)--;
- *new_rate = 0;
- }
-
- /* Guard against m underflow */
- if (*m < DPLL_MIN_MULTIPLIER) {
- *m = DPLL_MIN_MULTIPLIER;
- *new_rate = 0;
- r = DPLL_MULT_UNDERFLOW;
- }
-
- if (*new_rate == 0)
- *new_rate = _dpll_compute_new_rate(parent_rate, *m, n);
-
- return r;
-}
-
-/**
- * _omap2_dpll_is_in_bypass - check if DPLL is in bypass mode or not
- * @v: bitfield value of the DPLL enable
- *
- * Checks given DPLL enable bitfield to see whether the DPLL is in bypass
- * mode or not. Returns 1 if the DPLL is in bypass, 0 otherwise.
- */
-static int _omap2_dpll_is_in_bypass(u32 v)
-{
- u8 mask, val;
-
- mask = ti_clk_get_features()->dpll_bypass_vals;
-
- /*
- * Each set bit in the mask corresponds to a bypass value equal
- * to the bitshift. Go through each set-bit in the mask and
- * compare against the given register value.
- */
- while (mask) {
- val = __ffs(mask);
- mask ^= (1 << val);
- if (v == val)
- return 1;
- }
-
- return 0;
-}
-
-/* Public functions */
-u8 omap2_init_dpll_parent(struct clk_hw *hw)
-{
- struct clk_hw_omap *clk = to_clk_hw_omap(hw);
- u32 v;
- struct dpll_data *dd;
-
- dd = clk->dpll_data;
- if (!dd)
- return -EINVAL;
-
- v = omap2_clk_readl(clk, dd->control_reg);
- v &= dd->enable_mask;
- v >>= __ffs(dd->enable_mask);
-
- /* Reparent the struct clk in case the dpll is in bypass */
- if (_omap2_dpll_is_in_bypass(v))
- return 1;
-
- return 0;
-}
-
-/**
- * omap2_get_dpll_rate - returns the current DPLL CLKOUT rate
- * @clk: struct clk * of a DPLL
- *
- * DPLLs can be locked or bypassed - basically, enabled or disabled.
- * When locked, the DPLL output depends on the M and N values. When
- * bypassed, on OMAP2xxx, the output rate is either the 32KiHz clock
- * or sys_clk. Bypass rates on OMAP3 depend on the DPLL: DPLLs 1 and
- * 2 are bypassed with dpll1_fclk and dpll2_fclk respectively
- * (generated by DPLL3), while DPLL 3, 4, and 5 bypass rates are sys_clk.
- * Returns the current DPLL CLKOUT rate (*not* CLKOUTX2) if the DPLL is
- * locked, or the appropriate bypass rate if the DPLL is bypassed, or 0
- * if the clock @clk is not a DPLL.
- */
-unsigned long omap2_get_dpll_rate(struct clk_hw_omap *clk)
-{
- long long dpll_clk;
- u32 dpll_mult, dpll_div, v;
- struct dpll_data *dd;
-
- dd = clk->dpll_data;
- if (!dd)
- return 0;
-
- /* Return bypass rate if DPLL is bypassed */
- v = omap2_clk_readl(clk, dd->control_reg);
- v &= dd->enable_mask;
- v >>= __ffs(dd->enable_mask);
-
- if (_omap2_dpll_is_in_bypass(v))
- return __clk_get_rate(dd->clk_bypass);
-
- v = omap2_clk_readl(clk, dd->mult_div1_reg);
- dpll_mult = v & dd->mult_mask;
- dpll_mult >>= __ffs(dd->mult_mask);
- dpll_div = v & dd->div1_mask;
- dpll_div >>= __ffs(dd->div1_mask);
-
- dpll_clk = (long long) __clk_get_rate(dd->clk_ref) * dpll_mult;
- do_div(dpll_clk, dpll_div + 1);
-
- return dpll_clk;
-}
-
-/* DPLL rate rounding code */
-
-/**
- * omap2_dpll_round_rate - round a target rate for an OMAP DPLL
- * @clk: struct clk * for a DPLL
- * @target_rate: desired DPLL clock rate
- *
- * Given a DPLL and a desired target rate, round the target rate to a
- * possible, programmable rate for this DPLL. Attempts to select the
- * minimum possible n. Stores the computed (m, n) in the DPLL's
- * dpll_data structure so set_rate() will not need to call this
- * (expensive) function again. Returns ~0 if the target rate cannot
- * be rounded, or the rounded rate upon success.
- */
-long omap2_dpll_round_rate(struct clk_hw *hw, unsigned long target_rate,
- unsigned long *parent_rate)
-{
- struct clk_hw_omap *clk = to_clk_hw_omap(hw);
- int m, n, r, scaled_max_m;
- int min_delta_m = INT_MAX, min_delta_n = INT_MAX;
- unsigned long scaled_rt_rp;
- unsigned long new_rate = 0;
- struct dpll_data *dd;
- unsigned long ref_rate;
- long delta;
- long prev_min_delta = LONG_MAX;
- const char *clk_name;
-
- if (!clk || !clk->dpll_data)
- return ~0;
-
- dd = clk->dpll_data;
-
- ref_rate = __clk_get_rate(dd->clk_ref);
- clk_name = __clk_get_name(hw->clk);
- pr_debug("clock: %s: starting DPLL round_rate, target rate %lu\n",
- clk_name, target_rate);
-
- scaled_rt_rp = target_rate / (ref_rate / DPLL_SCALE_FACTOR);
- scaled_max_m = dd->max_multiplier * DPLL_SCALE_FACTOR;
-
- dd->last_rounded_rate = 0;
-
- for (n = dd->min_divider; n <= dd->max_divider; n++) {
-
- /* Is the (input clk, divider) pair valid for the DPLL? */
- r = _dpll_test_fint(clk, n);
- if (r == DPLL_FINT_UNDERFLOW)
- break;
- else if (r == DPLL_FINT_INVALID)
- continue;
-
- /* Compute the scaled DPLL multiplier, based on the divider */
- m = scaled_rt_rp * n;
-
- /*
- * Since we're counting n up, a m overflow means we
- * can bail out completely (since as n increases in
- * the next iteration, there's no way that m can
- * increase beyond the current m)
- */
- if (m > scaled_max_m)
- break;
-
- r = _dpll_test_mult(&m, n, &new_rate, target_rate,
- ref_rate);
-
- /* m can't be set low enough for this n - try with a larger n */
- if (r == DPLL_MULT_UNDERFLOW)
- continue;
-
- /* skip rates above our target rate */
- delta = target_rate - new_rate;
- if (delta < 0)
- continue;
-
- if (delta < prev_min_delta) {
- prev_min_delta = delta;
- min_delta_m = m;
- min_delta_n = n;
- }
-
- pr_debug("clock: %s: m = %d: n = %d: new_rate = %lu\n",
- clk_name, m, n, new_rate);
-
- if (delta == 0)
- break;
- }
-
- if (prev_min_delta == LONG_MAX) {
- pr_debug("clock: %s: cannot round to rate %lu\n",
- clk_name, target_rate);
- return ~0;
- }
-
- dd->last_rounded_m = min_delta_m;
- dd->last_rounded_n = min_delta_n;
- dd->last_rounded_rate = target_rate - prev_min_delta;
-
- return dd->last_rounded_rate;
-}
-
diff --git a/drivers/clk/ti/Makefile b/drivers/clk/ti/Makefile
index 105ffd0..62dae2a 100644
--- a/drivers/clk/ti/Makefile
+++ b/drivers/clk/ti/Makefile
@@ -1,6 +1,7 @@
obj-y += clk.o autoidle.o clockdomain.o
clk-common = dpll.o composite.o divider.o gate.o \
- fixed-factor.o mux.o apll.o
+ fixed-factor.o mux.o apll.o \
+ clkt_dpll.o
obj-$(CONFIG_SOC_AM33XX) += $(clk-common) clk-33xx.o
obj-$(CONFIG_SOC_TI81XX) += $(clk-common) fapll.o clk-816x.o
obj-$(CONFIG_ARCH_OMAP2) += $(clk-common) interface.o clk-2xxx.o
diff --git a/drivers/clk/ti/clkt_dpll.c b/drivers/clk/ti/clkt_dpll.c
new file mode 100644
index 0000000..a01fc7f
--- /dev/null
+++ b/drivers/clk/ti/clkt_dpll.c
@@ -0,0 +1,369 @@
+/*
+ * OMAP2/3/4 DPLL clock functions
+ *
+ * Copyright (C) 2005-2008 Texas Instruments, Inc.
+ * Copyright (C) 2004-2010 Nokia Corporation
+ *
+ * Contacts:
+ * Richard Woodruff <r-woodruff2@ti.com>
+ * Paul Walmsley
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#undef DEBUG
+
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/clk-provider.h>
+#include <linux/io.h>
+#include <linux/clk/ti.h>
+
+#include <asm/div64.h>
+
+#include "clock.h"
+
+/* DPLL rate rounding: minimum DPLL multiplier, divider values */
+#define DPLL_MIN_MULTIPLIER 2
+#define DPLL_MIN_DIVIDER 1
+
+/* Possible error results from _dpll_test_mult */
+#define DPLL_MULT_UNDERFLOW -1
+
+/*
+ * Scale factor to mitigate roundoff errors in DPLL rate rounding.
+ * The higher the scale factor, the greater the risk of arithmetic overflow,
+ * but the closer the rounded rate to the target rate. DPLL_SCALE_FACTOR
+ * must be a power of DPLL_SCALE_BASE.
+ */
+#define DPLL_SCALE_FACTOR 64
+#define DPLL_SCALE_BASE 2
+#define DPLL_ROUNDING_VAL ((DPLL_SCALE_BASE / 2) * \
+ (DPLL_SCALE_FACTOR / DPLL_SCALE_BASE))
+
+/*
+ * DPLL valid Fint frequency range for OMAP36xx and OMAP4xxx.
+ * From device data manual section 4.3 "DPLL and DLL Specifications".
+ */
+#define OMAP3PLUS_DPLL_FINT_JTYPE_MIN 500000
+#define OMAP3PLUS_DPLL_FINT_JTYPE_MAX 2500000
+
+/* _dpll_test_fint() return codes */
+#define DPLL_FINT_UNDERFLOW -1
+#define DPLL_FINT_INVALID -2
+
+/* Private functions */
+
+/*
+ * _dpll_test_fint - test whether an Fint value is valid for the DPLL
+ * @clk: DPLL struct clk to test
+ * @n: divider value (N) to test
+ *
+ * Tests whether a particular divider @n will result in a valid DPLL
+ * internal clock frequency Fint. See the 34xx TRM 4.7.6.2 "DPLL Jitter
+ * Correction". Returns 0 if OK, -1 if the enclosing loop can terminate
+ * (assuming that it is counting N upwards), or -2 if the enclosing loop
+ * should skip to the next iteration (again assuming N is increasing).
+ */
+static int _dpll_test_fint(struct clk_hw_omap *clk, unsigned int n)
+{
+ struct dpll_data *dd;
+ long fint, fint_min, fint_max;
+ int ret = 0;
+
+ dd = clk->dpll_data;
+
+ /* DPLL divider must result in a valid jitter correction val */
+ fint = __clk_get_rate(__clk_get_parent(clk->hw.clk)) / n;
+
+ if (dd->flags & DPLL_J_TYPE) {
+ fint_min = OMAP3PLUS_DPLL_FINT_JTYPE_MIN;
+ fint_max = OMAP3PLUS_DPLL_FINT_JTYPE_MAX;
+ } else {
+ fint_min = ti_clk_get_features()->fint_min;
+ fint_max = ti_clk_get_features()->fint_max;
+ }
+
+ if (!fint_min || !fint_max) {
+ WARN(1, "No fint limits available!\n");
+ return DPLL_FINT_INVALID;
+ }
+
+ if (fint < ti_clk_get_features()->fint_min) {
+ pr_debug("rejecting n=%d due to Fint failure, lowering max_divider\n",
+ n);
+ dd->max_divider = n;
+ ret = DPLL_FINT_UNDERFLOW;
+ } else if (fint > ti_clk_get_features()->fint_max) {
+ pr_debug("rejecting n=%d due to Fint failure, boosting min_divider\n",
+ n);
+ dd->min_divider = n;
+ ret = DPLL_FINT_INVALID;
+ } else if (fint > ti_clk_get_features()->fint_band1_max &&
+ fint < ti_clk_get_features()->fint_band2_min) {
+ pr_debug("rejecting n=%d due to Fint failure\n", n);
+ ret = DPLL_FINT_INVALID;
+ }
+
+ return ret;
+}
+
+static unsigned long _dpll_compute_new_rate(unsigned long parent_rate,
+ unsigned int m, unsigned int n)
+{
+ unsigned long long num;
+
+ num = (unsigned long long)parent_rate * m;
+ do_div(num, n);
+ return num;
+}
+
+/*
+ * _dpll_test_mult - test a DPLL multiplier value
+ * @m: pointer to the DPLL m (multiplier) value under test
+ * @n: current DPLL n (divider) value under test
+ * @new_rate: pointer to storage for the resulting rounded rate
+ * @target_rate: the desired DPLL rate
+ * @parent_rate: the DPLL's parent clock rate
+ *
+ * This code tests a DPLL multiplier value, ensuring that the
+ * resulting rate will not be higher than the target_rate, and that
+ * the multiplier value itself is valid for the DPLL. Initially, the
+ * integer pointed to by the m argument should be prescaled by
+ * multiplying by DPLL_SCALE_FACTOR. The code will replace this with
+ * a non-scaled m upon return. This non-scaled m will result in a
+ * new_rate as close as possible to target_rate (but not greater than
+ * target_rate) given the current (parent_rate, n, prescaled m)
+ * triple. Returns DPLL_MULT_UNDERFLOW in the event that the
+ * non-scaled m attempted to underflow, which can allow the calling
+ * function to bail out early; or 0 upon success.
+ */
+static int _dpll_test_mult(int *m, int n, unsigned long *new_rate,
+ unsigned long target_rate,
+ unsigned long parent_rate)
+{
+ int r = 0, carry = 0;
+
+ /* Unscale m and round if necessary */
+ if (*m % DPLL_SCALE_FACTOR >= DPLL_ROUNDING_VAL)
+ carry = 1;
+ *m = (*m / DPLL_SCALE_FACTOR) + carry;
+
+ /*
+ * The new rate must be <= the target rate to avoid programming
+ * a rate that is impossible for the hardware to handle
+ */
+ *new_rate = _dpll_compute_new_rate(parent_rate, *m, n);
+ if (*new_rate > target_rate) {
+ (*m)--;
+ *new_rate = 0;
+ }
+
+ /* Guard against m underflow */
+ if (*m < DPLL_MIN_MULTIPLIER) {
+ *m = DPLL_MIN_MULTIPLIER;
+ *new_rate = 0;
+ r = DPLL_MULT_UNDERFLOW;
+ }
+
+ if (*new_rate == 0)
+ *new_rate = _dpll_compute_new_rate(parent_rate, *m, n);
+
+ return r;
+}
+
+/**
+ * _omap2_dpll_is_in_bypass - check if DPLL is in bypass mode or not
+ * @v: bitfield value of the DPLL enable
+ *
+ * Checks given DPLL enable bitfield to see whether the DPLL is in bypass
+ * mode or not. Returns 1 if the DPLL is in bypass, 0 otherwise.
+ */
+static int _omap2_dpll_is_in_bypass(u32 v)
+{
+ u8 mask, val;
+
+ mask = ti_clk_get_features()->dpll_bypass_vals;
+
+ /*
+ * Each set bit in the mask corresponds to a bypass value equal
+ * to the bitshift. Go through each set-bit in the mask and
+ * compare against the given register value.
+ */
+ while (mask) {
+ val = __ffs(mask);
+ mask ^= (1 << val);
+ if (v == val)
+ return 1;
+ }
+
+ return 0;
+}
+
+/* Public functions */
+u8 omap2_init_dpll_parent(struct clk_hw *hw)
+{
+ struct clk_hw_omap *clk = to_clk_hw_omap(hw);
+ u32 v;
+ struct dpll_data *dd;
+
+ dd = clk->dpll_data;
+ if (!dd)
+ return -EINVAL;
+
+ v = ti_clk_ll_ops->clk_readl(dd->control_reg);
+ v &= dd->enable_mask;
+ v >>= __ffs(dd->enable_mask);
+
+ /* Reparent the struct clk in case the dpll is in bypass */
+ if (_omap2_dpll_is_in_bypass(v))
+ return 1;
+
+ return 0;
+}
+
+/**
+ * omap2_get_dpll_rate - returns the current DPLL CLKOUT rate
+ * @clk: struct clk * of a DPLL
+ *
+ * DPLLs can be locked or bypassed - basically, enabled or disabled.
+ * When locked, the DPLL output depends on the M and N values. When
+ * bypassed, on OMAP2xxx, the output rate is either the 32KiHz clock
+ * or sys_clk. Bypass rates on OMAP3 depend on the DPLL: DPLLs 1 and
+ * 2 are bypassed with dpll1_fclk and dpll2_fclk respectively
+ * (generated by DPLL3), while DPLL 3, 4, and 5 bypass rates are sys_clk.
+ * Returns the current DPLL CLKOUT rate (*not* CLKOUTX2) if the DPLL is
+ * locked, or the appropriate bypass rate if the DPLL is bypassed, or 0
+ * if the clock @clk is not a DPLL.
+ */
+unsigned long omap2_get_dpll_rate(struct clk_hw_omap *clk)
+{
+ long long dpll_clk;
+ u32 dpll_mult, dpll_div, v;
+ struct dpll_data *dd;
+
+ dd = clk->dpll_data;
+ if (!dd)
+ return 0;
+
+ /* Return bypass rate if DPLL is bypassed */
+ v = ti_clk_ll_ops->clk_readl(dd->control_reg);
+ v &= dd->enable_mask;
+ v >>= __ffs(dd->enable_mask);
+
+ if (_omap2_dpll_is_in_bypass(v))
+ return __clk_get_rate(dd->clk_bypass);
+
+ v = ti_clk_ll_ops->clk_readl(dd->mult_div1_reg);
+ dpll_mult = v & dd->mult_mask;
+ dpll_mult >>= __ffs(dd->mult_mask);
+ dpll_div = v & dd->div1_mask;
+ dpll_div >>= __ffs(dd->div1_mask);
+
+ dpll_clk = (long long)__clk_get_rate(dd->clk_ref) * dpll_mult;
+ do_div(dpll_clk, dpll_div + 1);
+
+ return dpll_clk;
+}
+
+/* DPLL rate rounding code */
+
+/**
+ * omap2_dpll_round_rate - round a target rate for an OMAP DPLL
+ * @clk: struct clk * for a DPLL
+ * @target_rate: desired DPLL clock rate
+ *
+ * Given a DPLL and a desired target rate, round the target rate to a
+ * possible, programmable rate for this DPLL. Attempts to select the
+ * minimum possible n. Stores the computed (m, n) in the DPLL's
+ * dpll_data structure so set_rate() will not need to call this
+ * (expensive) function again. Returns ~0 if the target rate cannot
+ * be rounded, or the rounded rate upon success.
+ */
+long omap2_dpll_round_rate(struct clk_hw *hw, unsigned long target_rate,
+ unsigned long *parent_rate)
+{
+ struct clk_hw_omap *clk = to_clk_hw_omap(hw);
+ int m, n, r, scaled_max_m;
+ int min_delta_m = INT_MAX, min_delta_n = INT_MAX;
+ unsigned long scaled_rt_rp;
+ unsigned long new_rate = 0;
+ struct dpll_data *dd;
+ unsigned long ref_rate;
+ long delta;
+ long prev_min_delta = LONG_MAX;
+ const char *clk_name;
+
+ if (!clk || !clk->dpll_data)
+ return ~0;
+
+ dd = clk->dpll_data;
+
+ ref_rate = __clk_get_rate(dd->clk_ref);
+ clk_name = __clk_get_name(hw->clk);
+ pr_debug("clock: %s: starting DPLL round_rate, target rate %lu\n",
+ clk_name, target_rate);
+
+ scaled_rt_rp = target_rate / (ref_rate / DPLL_SCALE_FACTOR);
+ scaled_max_m = dd->max_multiplier * DPLL_SCALE_FACTOR;
+
+ dd->last_rounded_rate = 0;
+
+ for (n = dd->min_divider; n <= dd->max_divider; n++) {
+ /* Is the (input clk, divider) pair valid for the DPLL? */
+ r = _dpll_test_fint(clk, n);
+ if (r == DPLL_FINT_UNDERFLOW)
+ break;
+ else if (r == DPLL_FINT_INVALID)
+ continue;
+
+ /* Compute the scaled DPLL multiplier, based on the divider */
+ m = scaled_rt_rp * n;
+
+ /*
+ * Since we're counting n up, a m overflow means we
+ * can bail out completely (since as n increases in
+ * the next iteration, there's no way that m can
+ * increase beyond the current m)
+ */
+ if (m > scaled_max_m)
+ break;
+
+ r = _dpll_test_mult(&m, n, &new_rate, target_rate,
+ ref_rate);
+
+ /* m can't be set low enough for this n - try with a larger n */
+ if (r == DPLL_MULT_UNDERFLOW)
+ continue;
+
+ /* skip rates above our target rate */
+ delta = target_rate - new_rate;
+ if (delta < 0)
+ continue;
+
+ if (delta < prev_min_delta) {
+ prev_min_delta = delta;
+ min_delta_m = m;
+ min_delta_n = n;
+ }
+
+ pr_debug("clock: %s: m = %d: n = %d: new_rate = %lu\n",
+ clk_name, m, n, new_rate);
+
+ if (delta == 0)
+ break;
+ }
+
+ if (prev_min_delta == LONG_MAX) {
+ pr_debug("clock: %s: cannot round to rate %lu\n",
+ clk_name, target_rate);
+ return ~0;
+ }
+
+ dd->last_rounded_m = min_delta_m;
+ dd->last_rounded_n = min_delta_n;
+ dd->last_rounded_rate = target_rate - prev_min_delta;
+
+ return dd->last_rounded_rate;
+}
diff --git a/drivers/clk/ti/clock.h b/drivers/clk/ti/clock.h
index 404158d..05ed10a 100644
--- a/drivers/clk/ti/clock.h
+++ b/drivers/clk/ti/clock.h
@@ -169,4 +169,6 @@ void ti_clk_patch_legacy_clks(struct ti_clk **patch);
struct clk *ti_clk_register_clk(struct ti_clk *setup);
int ti_clk_register_legacy_clks(struct ti_clk_alias *clks);
+u8 omap2_init_dpll_parent(struct clk_hw *hw);
+
#endif
diff --git a/include/linux/clk/ti.h b/include/linux/clk/ti.h
index b066835..f2436b2 100644
--- a/include/linux/clk/ti.h
+++ b/include/linux/clk/ti.h
@@ -286,7 +286,6 @@ long omap4_dpll_regm4xen_determine_rate(struct clk_hw *hw,
unsigned long max_rate,
unsigned long *best_parent_rate,
struct clk_hw **best_parent_clk);
-u8 omap2_init_dpll_parent(struct clk_hw *hw);
unsigned long omap3_dpll_recalc(struct clk_hw *hw, unsigned long parent_rate);
long omap2_dpll_round_rate(struct clk_hw *hw, unsigned long target_rate,
unsigned long *parent_rate);
--
1.7.9.5
^ permalink raw reply related [flat|nested] 120+ messages in thread
* [PATCHv2 03/27] clk: ti: move OMAP4+ DPLL implementation under drivers/clk
2015-05-11 8:54 ` Tero Kristo
(?)
@ 2015-05-11 8:54 ` Tero Kristo
-1 siblings, 0 replies; 120+ messages in thread
From: Tero Kristo @ 2015-05-11 8:54 UTC (permalink / raw)
To: mturquette, tony, linux-omap, linux-clk, sboyd, paul; +Cc: linux-arm-kernel
With the legacy clock support gone, the OMAP4 specific DPLL implementations
can be moved under the clock driver. Change some of the function prototypes
to be static at the same time, and remove some exports from the global TI
clock driver header.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
---
arch/arm/mach-omap2/Makefile | 6 +-
arch/arm/mach-omap2/clock.h | 4 -
arch/arm/mach-omap2/dpll44xx.c | 232 ---------------------------------------
drivers/clk/ti/Makefile | 6 +-
drivers/clk/ti/clock.h | 14 +++
drivers/clk/ti/dpll44xx.c | 233 ++++++++++++++++++++++++++++++++++++++++
include/linux/clk/ti.h | 13 +--
7 files changed, 254 insertions(+), 254 deletions(-)
delete mode 100644 arch/arm/mach-omap2/dpll44xx.c
create mode 100644 drivers/clk/ti/dpll44xx.c
diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
index fcb5d47..5bcd282 100644
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -193,12 +193,12 @@ obj-$(CONFIG_ARCH_OMAP3) += clock3517.o clock36xx.o
obj-$(CONFIG_ARCH_OMAP3) += dpll3xxx.o
obj-$(CONFIG_ARCH_OMAP3) += clkt_iclk.o
obj-$(CONFIG_ARCH_OMAP4) += $(clock-common)
-obj-$(CONFIG_ARCH_OMAP4) += dpll3xxx.o dpll44xx.o
+obj-$(CONFIG_ARCH_OMAP4) += dpll3xxx.o
obj-$(CONFIG_SOC_AM33XX) += $(clock-common) dpll3xxx.o
obj-$(CONFIG_SOC_OMAP5) += $(clock-common)
-obj-$(CONFIG_SOC_OMAP5) += dpll3xxx.o dpll44xx.o
+obj-$(CONFIG_SOC_OMAP5) += dpll3xxx.o
obj-$(CONFIG_SOC_DRA7XX) += $(clock-common)
-obj-$(CONFIG_SOC_DRA7XX) += dpll3xxx.o dpll44xx.o
+obj-$(CONFIG_SOC_DRA7XX) += dpll3xxx.o
obj-$(CONFIG_SOC_AM43XX) += $(clock-common) dpll3xxx.o
# OMAP2 clock rate set data (old "OPP" data)
diff --git a/arch/arm/mach-omap2/clock.h b/arch/arm/mach-omap2/clock.h
index ac21856..d7ed244 100644
--- a/arch/arm/mach-omap2/clock.h
+++ b/arch/arm/mach-omap2/clock.h
@@ -183,8 +183,6 @@ struct clksel {
u32 omap3_dpll_autoidle_read(struct clk_hw_omap *clk);
void omap3_dpll_allow_idle(struct clk_hw_omap *clk);
void omap3_dpll_deny_idle(struct clk_hw_omap *clk);
-void omap4_dpllmx_allow_gatectrl(struct clk_hw_omap *clk);
-void omap4_dpllmx_deny_gatectrl(struct clk_hw_omap *clk);
void __init omap2_clk_disable_clkdm_control(void);
@@ -204,8 +202,6 @@ int omap2_clksel_set_parent(struct clk_hw *hw, u8 field_val);
extern void omap2_clkt_iclk_allow_idle(struct clk_hw_omap *clk);
extern void omap2_clkt_iclk_deny_idle(struct clk_hw_omap *clk);
-unsigned long omap2_get_dpll_rate(struct clk_hw_omap *clk);
-
void omap2_clk_dflt_find_companion(struct clk_hw_omap *clk,
void __iomem **other_reg,
u8 *other_bit);
diff --git a/arch/arm/mach-omap2/dpll44xx.c b/arch/arm/mach-omap2/dpll44xx.c
deleted file mode 100644
index f231be0..0000000
--- a/arch/arm/mach-omap2/dpll44xx.c
+++ /dev/null
@@ -1,232 +0,0 @@
-/*
- * OMAP4-specific DPLL control functions
- *
- * Copyright (C) 2011 Texas Instruments, Inc.
- * Rajendra Nayak
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-#include <linux/bitops.h>
-
-#include "clock.h"
-
-/*
- * Maximum DPLL input frequency (FINT) and output frequency (FOUT) that
- * can supported when using the DPLL low-power mode. Frequencies are
- * defined in OMAP4430/60 Public TRM section 3.6.3.3.2 "Enable Control,
- * Status, and Low-Power Operation Mode".
- */
-#define OMAP4_DPLL_LP_FINT_MAX 1000000
-#define OMAP4_DPLL_LP_FOUT_MAX 100000000
-
-/*
- * Bitfield declarations
- */
-#define OMAP4430_DPLL_CLKOUT_GATE_CTRL_MASK (1 << 8)
-#define OMAP4430_DPLL_CLKOUTX2_GATE_CTRL_MASK (1 << 10)
-#define OMAP4430_DPLL_REGM4XEN_MASK (1 << 11)
-
-/* Static rate multiplier for OMAP4 REGM4XEN clocks */
-#define OMAP4430_REGM4XEN_MULT 4
-
-void omap4_dpllmx_allow_gatectrl(struct clk_hw_omap *clk)
-{
- u32 v;
- u32 mask;
-
- if (!clk || !clk->clksel_reg)
- return;
-
- mask = clk->flags & CLOCK_CLKOUTX2 ?
- OMAP4430_DPLL_CLKOUTX2_GATE_CTRL_MASK :
- OMAP4430_DPLL_CLKOUT_GATE_CTRL_MASK;
-
- v = omap2_clk_readl(clk, clk->clksel_reg);
- /* Clear the bit to allow gatectrl */
- v &= ~mask;
- omap2_clk_writel(v, clk, clk->clksel_reg);
-}
-
-void omap4_dpllmx_deny_gatectrl(struct clk_hw_omap *clk)
-{
- u32 v;
- u32 mask;
-
- if (!clk || !clk->clksel_reg)
- return;
-
- mask = clk->flags & CLOCK_CLKOUTX2 ?
- OMAP4430_DPLL_CLKOUTX2_GATE_CTRL_MASK :
- OMAP4430_DPLL_CLKOUT_GATE_CTRL_MASK;
-
- v = omap2_clk_readl(clk, clk->clksel_reg);
- /* Set the bit to deny gatectrl */
- v |= mask;
- omap2_clk_writel(v, clk, clk->clksel_reg);
-}
-
-const struct clk_hw_omap_ops clkhwops_omap4_dpllmx = {
- .allow_idle = omap4_dpllmx_allow_gatectrl,
- .deny_idle = omap4_dpllmx_deny_gatectrl,
-};
-
-/**
- * omap4_dpll_lpmode_recalc - compute DPLL low-power setting
- * @dd: pointer to the dpll data structure
- *
- * Calculates if low-power mode can be enabled based upon the last
- * multiplier and divider values calculated. If low-power mode can be
- * enabled, then the bit to enable low-power mode is stored in the
- * last_rounded_lpmode variable. This implementation is based upon the
- * criteria for enabling low-power mode as described in the OMAP4430/60
- * Public TRM section 3.6.3.3.2 "Enable Control, Status, and Low-Power
- * Operation Mode".
- */
-static void omap4_dpll_lpmode_recalc(struct dpll_data *dd)
-{
- long fint, fout;
-
- fint = __clk_get_rate(dd->clk_ref) / (dd->last_rounded_n + 1);
- fout = fint * dd->last_rounded_m;
-
- if ((fint < OMAP4_DPLL_LP_FINT_MAX) && (fout < OMAP4_DPLL_LP_FOUT_MAX))
- dd->last_rounded_lpmode = 1;
- else
- dd->last_rounded_lpmode = 0;
-}
-
-/**
- * omap4_dpll_regm4xen_recalc - compute DPLL rate, considering REGM4XEN bit
- * @clk: struct clk * of the DPLL to compute the rate for
- *
- * Compute the output rate for the OMAP4 DPLL represented by @clk.
- * Takes the REGM4XEN bit into consideration, which is needed for the
- * OMAP4 ABE DPLL. Returns the DPLL's output rate (before M-dividers)
- * upon success, or 0 upon error.
- */
-unsigned long omap4_dpll_regm4xen_recalc(struct clk_hw *hw,
- unsigned long parent_rate)
-{
- struct clk_hw_omap *clk = to_clk_hw_omap(hw);
- u32 v;
- unsigned long rate;
- struct dpll_data *dd;
-
- if (!clk || !clk->dpll_data)
- return 0;
-
- dd = clk->dpll_data;
-
- rate = omap2_get_dpll_rate(clk);
-
- /* regm4xen adds a multiplier of 4 to DPLL calculations */
- v = omap2_clk_readl(clk, dd->control_reg);
- if (v & OMAP4430_DPLL_REGM4XEN_MASK)
- rate *= OMAP4430_REGM4XEN_MULT;
-
- return rate;
-}
-
-/**
- * omap4_dpll_regm4xen_round_rate - round DPLL rate, considering REGM4XEN bit
- * @clk: struct clk * of the DPLL to round a rate for
- * @target_rate: the desired rate of the DPLL
- *
- * Compute the rate that would be programmed into the DPLL hardware
- * for @clk if set_rate() were to be provided with the rate
- * @target_rate. Takes the REGM4XEN bit into consideration, which is
- * needed for the OMAP4 ABE DPLL. Returns the rounded rate (before
- * M-dividers) upon success, -EINVAL if @clk is null or not a DPLL, or
- * ~0 if an error occurred in omap2_dpll_round_rate().
- */
-long omap4_dpll_regm4xen_round_rate(struct clk_hw *hw,
- unsigned long target_rate,
- unsigned long *parent_rate)
-{
- struct clk_hw_omap *clk = to_clk_hw_omap(hw);
- struct dpll_data *dd;
- long r;
-
- if (!clk || !clk->dpll_data)
- return -EINVAL;
-
- dd = clk->dpll_data;
-
- dd->last_rounded_m4xen = 0;
-
- /*
- * First try to compute the DPLL configuration for
- * target rate without using the 4X multiplier.
- */
- r = omap2_dpll_round_rate(hw, target_rate, NULL);
- if (r != ~0)
- goto out;
-
- /*
- * If we did not find a valid DPLL configuration, try again, but
- * this time see if using the 4X multiplier can help. Enabling the
- * 4X multiplier is equivalent to dividing the target rate by 4.
- */
- r = omap2_dpll_round_rate(hw, target_rate / OMAP4430_REGM4XEN_MULT,
- NULL);
- if (r == ~0)
- return r;
-
- dd->last_rounded_rate *= OMAP4430_REGM4XEN_MULT;
- dd->last_rounded_m4xen = 1;
-
-out:
- omap4_dpll_lpmode_recalc(dd);
-
- return dd->last_rounded_rate;
-}
-
-/**
- * omap4_dpll_regm4xen_determine_rate - determine rate for a DPLL
- * @hw: pointer to the clock to determine rate for
- * @rate: target rate for the DPLL
- * @best_parent_rate: pointer for returning best parent rate
- * @best_parent_clk: pointer for returning best parent clock
- *
- * Determines which DPLL mode to use for reaching a desired rate.
- * Checks whether the DPLL shall be in bypass or locked mode, and if
- * locked, calculates the M,N values for the DPLL via round-rate.
- * Returns a positive clock rate with success, negative error value
- * in failure.
- */
-long omap4_dpll_regm4xen_determine_rate(struct clk_hw *hw, unsigned long rate,
- unsigned long min_rate,
- unsigned long max_rate,
- unsigned long *best_parent_rate,
- struct clk_hw **best_parent_clk)
-{
- struct clk_hw_omap *clk = to_clk_hw_omap(hw);
- struct dpll_data *dd;
-
- if (!hw || !rate)
- return -EINVAL;
-
- dd = clk->dpll_data;
- if (!dd)
- return -EINVAL;
-
- if (__clk_get_rate(dd->clk_bypass) == rate &&
- (dd->modes & (1 << DPLL_LOW_POWER_BYPASS))) {
- *best_parent_clk = __clk_get_hw(dd->clk_bypass);
- } else {
- rate = omap4_dpll_regm4xen_round_rate(hw, rate,
- best_parent_rate);
- *best_parent_clk = __clk_get_hw(dd->clk_ref);
- }
-
- *best_parent_rate = rate;
-
- return rate;
-}
diff --git a/drivers/clk/ti/Makefile b/drivers/clk/ti/Makefile
index 62dae2a..c3ec301 100644
--- a/drivers/clk/ti/Makefile
+++ b/drivers/clk/ti/Makefile
@@ -7,10 +7,10 @@ obj-$(CONFIG_SOC_TI81XX) += $(clk-common) fapll.o clk-816x.o
obj-$(CONFIG_ARCH_OMAP2) += $(clk-common) interface.o clk-2xxx.o
obj-$(CONFIG_ARCH_OMAP3) += $(clk-common) interface.o \
clk-3xxx.o
-obj-$(CONFIG_ARCH_OMAP4) += $(clk-common) clk-44xx.o
-obj-$(CONFIG_SOC_OMAP5) += $(clk-common) clk-54xx.o
+obj-$(CONFIG_ARCH_OMAP4) += $(clk-common) clk-44xx.o dpll44xx.o
+obj-$(CONFIG_SOC_OMAP5) += $(clk-common) clk-54xx.o dpll44xx.o
obj-$(CONFIG_SOC_DRA7XX) += $(clk-common) clk-7xx.o \
- clk-dra7-atl.o
+ clk-dra7-atl.o dpll44xx.o
obj-$(CONFIG_SOC_AM43XX) += $(clk-common) clk-43xx.o
ifdef CONFIG_ATAGS
diff --git a/drivers/clk/ti/clock.h b/drivers/clk/ti/clock.h
index 05ed10a..c75d4b4 100644
--- a/drivers/clk/ti/clock.h
+++ b/drivers/clk/ti/clock.h
@@ -169,6 +169,20 @@ void ti_clk_patch_legacy_clks(struct ti_clk **patch);
struct clk *ti_clk_register_clk(struct ti_clk *setup);
int ti_clk_register_legacy_clks(struct ti_clk_alias *clks);
+extern const struct clk_hw_omap_ops clkhwops_omap4_dpllmx;
+
u8 omap2_init_dpll_parent(struct clk_hw *hw);
+unsigned long omap4_dpll_regm4xen_recalc(struct clk_hw *hw,
+ unsigned long parent_rate);
+long omap4_dpll_regm4xen_round_rate(struct clk_hw *hw,
+ unsigned long target_rate,
+ unsigned long *parent_rate);
+long omap4_dpll_regm4xen_determine_rate(struct clk_hw *hw,
+ unsigned long rate,
+ unsigned long min_rate,
+ unsigned long max_rate,
+ unsigned long *best_parent_rate,
+ struct clk_hw **best_parent_clk);
+
#endif
diff --git a/drivers/clk/ti/dpll44xx.c b/drivers/clk/ti/dpll44xx.c
new file mode 100644
index 0000000..ef1a5b4
--- /dev/null
+++ b/drivers/clk/ti/dpll44xx.c
@@ -0,0 +1,233 @@
+/*
+ * OMAP4-specific DPLL control functions
+ *
+ * Copyright (C) 2011 Texas Instruments, Inc.
+ * Rajendra Nayak
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/bitops.h>
+#include <linux/clk/ti.h>
+
+#include "clock.h"
+
+/*
+ * Maximum DPLL input frequency (FINT) and output frequency (FOUT) that
+ * can supported when using the DPLL low-power mode. Frequencies are
+ * defined in OMAP4430/60 Public TRM section 3.6.3.3.2 "Enable Control,
+ * Status, and Low-Power Operation Mode".
+ */
+#define OMAP4_DPLL_LP_FINT_MAX 1000000
+#define OMAP4_DPLL_LP_FOUT_MAX 100000000
+
+/*
+ * Bitfield declarations
+ */
+#define OMAP4430_DPLL_CLKOUT_GATE_CTRL_MASK BIT(8)
+#define OMAP4430_DPLL_CLKOUTX2_GATE_CTRL_MASK BIT(10)
+#define OMAP4430_DPLL_REGM4XEN_MASK BIT(11)
+
+/* Static rate multiplier for OMAP4 REGM4XEN clocks */
+#define OMAP4430_REGM4XEN_MULT 4
+
+static void omap4_dpllmx_allow_gatectrl(struct clk_hw_omap *clk)
+{
+ u32 v;
+ u32 mask;
+
+ if (!clk || !clk->clksel_reg)
+ return;
+
+ mask = clk->flags & CLOCK_CLKOUTX2 ?
+ OMAP4430_DPLL_CLKOUTX2_GATE_CTRL_MASK :
+ OMAP4430_DPLL_CLKOUT_GATE_CTRL_MASK;
+
+ v = ti_clk_ll_ops->clk_readl(clk->clksel_reg);
+ /* Clear the bit to allow gatectrl */
+ v &= ~mask;
+ ti_clk_ll_ops->clk_writel(v, clk->clksel_reg);
+}
+
+static void omap4_dpllmx_deny_gatectrl(struct clk_hw_omap *clk)
+{
+ u32 v;
+ u32 mask;
+
+ if (!clk || !clk->clksel_reg)
+ return;
+
+ mask = clk->flags & CLOCK_CLKOUTX2 ?
+ OMAP4430_DPLL_CLKOUTX2_GATE_CTRL_MASK :
+ OMAP4430_DPLL_CLKOUT_GATE_CTRL_MASK;
+
+ v = ti_clk_ll_ops->clk_readl(clk->clksel_reg);
+ /* Set the bit to deny gatectrl */
+ v |= mask;
+ ti_clk_ll_ops->clk_writel(v, clk->clksel_reg);
+}
+
+const struct clk_hw_omap_ops clkhwops_omap4_dpllmx = {
+ .allow_idle = omap4_dpllmx_allow_gatectrl,
+ .deny_idle = omap4_dpllmx_deny_gatectrl,
+};
+
+/**
+ * omap4_dpll_lpmode_recalc - compute DPLL low-power setting
+ * @dd: pointer to the dpll data structure
+ *
+ * Calculates if low-power mode can be enabled based upon the last
+ * multiplier and divider values calculated. If low-power mode can be
+ * enabled, then the bit to enable low-power mode is stored in the
+ * last_rounded_lpmode variable. This implementation is based upon the
+ * criteria for enabling low-power mode as described in the OMAP4430/60
+ * Public TRM section 3.6.3.3.2 "Enable Control, Status, and Low-Power
+ * Operation Mode".
+ */
+static void omap4_dpll_lpmode_recalc(struct dpll_data *dd)
+{
+ long fint, fout;
+
+ fint = __clk_get_rate(dd->clk_ref) / (dd->last_rounded_n + 1);
+ fout = fint * dd->last_rounded_m;
+
+ if ((fint < OMAP4_DPLL_LP_FINT_MAX) && (fout < OMAP4_DPLL_LP_FOUT_MAX))
+ dd->last_rounded_lpmode = 1;
+ else
+ dd->last_rounded_lpmode = 0;
+}
+
+/**
+ * omap4_dpll_regm4xen_recalc - compute DPLL rate, considering REGM4XEN bit
+ * @clk: struct clk * of the DPLL to compute the rate for
+ *
+ * Compute the output rate for the OMAP4 DPLL represented by @clk.
+ * Takes the REGM4XEN bit into consideration, which is needed for the
+ * OMAP4 ABE DPLL. Returns the DPLL's output rate (before M-dividers)
+ * upon success, or 0 upon error.
+ */
+unsigned long omap4_dpll_regm4xen_recalc(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ struct clk_hw_omap *clk = to_clk_hw_omap(hw);
+ u32 v;
+ unsigned long rate;
+ struct dpll_data *dd;
+
+ if (!clk || !clk->dpll_data)
+ return 0;
+
+ dd = clk->dpll_data;
+
+ rate = omap2_get_dpll_rate(clk);
+
+ /* regm4xen adds a multiplier of 4 to DPLL calculations */
+ v = ti_clk_ll_ops->clk_readl(dd->control_reg);
+ if (v & OMAP4430_DPLL_REGM4XEN_MASK)
+ rate *= OMAP4430_REGM4XEN_MULT;
+
+ return rate;
+}
+
+/**
+ * omap4_dpll_regm4xen_round_rate - round DPLL rate, considering REGM4XEN bit
+ * @clk: struct clk * of the DPLL to round a rate for
+ * @target_rate: the desired rate of the DPLL
+ *
+ * Compute the rate that would be programmed into the DPLL hardware
+ * for @clk if set_rate() were to be provided with the rate
+ * @target_rate. Takes the REGM4XEN bit into consideration, which is
+ * needed for the OMAP4 ABE DPLL. Returns the rounded rate (before
+ * M-dividers) upon success, -EINVAL if @clk is null or not a DPLL, or
+ * ~0 if an error occurred in omap2_dpll_round_rate().
+ */
+long omap4_dpll_regm4xen_round_rate(struct clk_hw *hw,
+ unsigned long target_rate,
+ unsigned long *parent_rate)
+{
+ struct clk_hw_omap *clk = to_clk_hw_omap(hw);
+ struct dpll_data *dd;
+ long r;
+
+ if (!clk || !clk->dpll_data)
+ return -EINVAL;
+
+ dd = clk->dpll_data;
+
+ dd->last_rounded_m4xen = 0;
+
+ /*
+ * First try to compute the DPLL configuration for
+ * target rate without using the 4X multiplier.
+ */
+ r = omap2_dpll_round_rate(hw, target_rate, NULL);
+ if (r != ~0)
+ goto out;
+
+ /*
+ * If we did not find a valid DPLL configuration, try again, but
+ * this time see if using the 4X multiplier can help. Enabling the
+ * 4X multiplier is equivalent to dividing the target rate by 4.
+ */
+ r = omap2_dpll_round_rate(hw, target_rate / OMAP4430_REGM4XEN_MULT,
+ NULL);
+ if (r == ~0)
+ return r;
+
+ dd->last_rounded_rate *= OMAP4430_REGM4XEN_MULT;
+ dd->last_rounded_m4xen = 1;
+
+out:
+ omap4_dpll_lpmode_recalc(dd);
+
+ return dd->last_rounded_rate;
+}
+
+/**
+ * omap4_dpll_regm4xen_determine_rate - determine rate for a DPLL
+ * @hw: pointer to the clock to determine rate for
+ * @rate: target rate for the DPLL
+ * @best_parent_rate: pointer for returning best parent rate
+ * @best_parent_clk: pointer for returning best parent clock
+ *
+ * Determines which DPLL mode to use for reaching a desired rate.
+ * Checks whether the DPLL shall be in bypass or locked mode, and if
+ * locked, calculates the M,N values for the DPLL via round-rate.
+ * Returns a positive clock rate with success, negative error value
+ * in failure.
+ */
+long omap4_dpll_regm4xen_determine_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long min_rate,
+ unsigned long max_rate,
+ unsigned long *best_parent_rate,
+ struct clk_hw **best_parent_clk)
+{
+ struct clk_hw_omap *clk = to_clk_hw_omap(hw);
+ struct dpll_data *dd;
+
+ if (!hw || !rate)
+ return -EINVAL;
+
+ dd = clk->dpll_data;
+ if (!dd)
+ return -EINVAL;
+
+ if (__clk_get_rate(dd->clk_bypass) == rate &&
+ (dd->modes & (1 << DPLL_LOW_POWER_BYPASS))) {
+ *best_parent_clk = __clk_get_hw(dd->clk_bypass);
+ } else {
+ rate = omap4_dpll_regm4xen_round_rate(hw, rate,
+ best_parent_rate);
+ *best_parent_clk = __clk_get_hw(dd->clk_ref);
+ }
+
+ *best_parent_rate = rate;
+
+ return rate;
+}
diff --git a/include/linux/clk/ti.h b/include/linux/clk/ti.h
index f2436b2..89deddf 100644
--- a/include/linux/clk/ti.h
+++ b/include/linux/clk/ti.h
@@ -275,17 +275,6 @@ long omap3_noncore_dpll_determine_rate(struct clk_hw *hw,
unsigned long max_rate,
unsigned long *best_parent_rate,
struct clk_hw **best_parent_clk);
-unsigned long omap4_dpll_regm4xen_recalc(struct clk_hw *hw,
- unsigned long parent_rate);
-long omap4_dpll_regm4xen_round_rate(struct clk_hw *hw,
- unsigned long target_rate,
- unsigned long *parent_rate);
-long omap4_dpll_regm4xen_determine_rate(struct clk_hw *hw,
- unsigned long rate,
- unsigned long min_rate,
- unsigned long max_rate,
- unsigned long *best_parent_rate,
- struct clk_hw **best_parent_clk);
unsigned long omap3_dpll_recalc(struct clk_hw *hw, unsigned long parent_rate);
long omap2_dpll_round_rate(struct clk_hw *hw, unsigned long target_rate,
unsigned long *parent_rate);
@@ -314,6 +303,7 @@ int omap2_reprogram_dpllcore(struct clk_hw *clk, unsigned long rate,
unsigned long parent_rate);
void omap2xxx_clkt_dpllcore_init(struct clk_hw *hw);
void omap2xxx_clkt_vps_init(void);
+unsigned long omap2_get_dpll_rate(struct clk_hw_omap *clk);
void __iomem *ti_clk_get_reg_addr(struct device_node *node, int index);
void ti_dt_clocks_register(struct ti_dt_clk *oclks);
@@ -364,7 +354,6 @@ static inline void of_ti_clk_deny_autoidle_all(void) { }
extern const struct clk_hw_omap_ops clkhwops_omap2xxx_dpll;
extern const struct clk_hw_omap_ops clkhwops_omap2430_i2chs_wait;
extern const struct clk_hw_omap_ops clkhwops_omap3_dpll;
-extern const struct clk_hw_omap_ops clkhwops_omap4_dpllmx;
extern const struct clk_hw_omap_ops clkhwops_wait;
extern const struct clk_hw_omap_ops clkhwops_omap3430es2_dss_usbhost_wait;
extern const struct clk_hw_omap_ops clkhwops_am35xx_ipss_module_wait;
--
1.7.9.5
^ permalink raw reply related [flat|nested] 120+ messages in thread
* [PATCHv2 03/27] clk: ti: move OMAP4+ DPLL implementation under drivers/clk
@ 2015-05-11 8:54 ` Tero Kristo
0 siblings, 0 replies; 120+ messages in thread
From: Tero Kristo @ 2015-05-11 8:54 UTC (permalink / raw)
To: mturquette, tony, linux-omap, linux-clk, sboyd, paul; +Cc: linux-arm-kernel
With the legacy clock support gone, the OMAP4 specific DPLL implementations
can be moved under the clock driver. Change some of the function prototypes
to be static at the same time, and remove some exports from the global TI
clock driver header.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
---
arch/arm/mach-omap2/Makefile | 6 +-
arch/arm/mach-omap2/clock.h | 4 -
arch/arm/mach-omap2/dpll44xx.c | 232 ---------------------------------------
drivers/clk/ti/Makefile | 6 +-
drivers/clk/ti/clock.h | 14 +++
drivers/clk/ti/dpll44xx.c | 233 ++++++++++++++++++++++++++++++++++++++++
include/linux/clk/ti.h | 13 +--
7 files changed, 254 insertions(+), 254 deletions(-)
delete mode 100644 arch/arm/mach-omap2/dpll44xx.c
create mode 100644 drivers/clk/ti/dpll44xx.c
diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
index fcb5d47..5bcd282 100644
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -193,12 +193,12 @@ obj-$(CONFIG_ARCH_OMAP3) += clock3517.o clock36xx.o
obj-$(CONFIG_ARCH_OMAP3) += dpll3xxx.o
obj-$(CONFIG_ARCH_OMAP3) += clkt_iclk.o
obj-$(CONFIG_ARCH_OMAP4) += $(clock-common)
-obj-$(CONFIG_ARCH_OMAP4) += dpll3xxx.o dpll44xx.o
+obj-$(CONFIG_ARCH_OMAP4) += dpll3xxx.o
obj-$(CONFIG_SOC_AM33XX) += $(clock-common) dpll3xxx.o
obj-$(CONFIG_SOC_OMAP5) += $(clock-common)
-obj-$(CONFIG_SOC_OMAP5) += dpll3xxx.o dpll44xx.o
+obj-$(CONFIG_SOC_OMAP5) += dpll3xxx.o
obj-$(CONFIG_SOC_DRA7XX) += $(clock-common)
-obj-$(CONFIG_SOC_DRA7XX) += dpll3xxx.o dpll44xx.o
+obj-$(CONFIG_SOC_DRA7XX) += dpll3xxx.o
obj-$(CONFIG_SOC_AM43XX) += $(clock-common) dpll3xxx.o
# OMAP2 clock rate set data (old "OPP" data)
diff --git a/arch/arm/mach-omap2/clock.h b/arch/arm/mach-omap2/clock.h
index ac21856..d7ed244 100644
--- a/arch/arm/mach-omap2/clock.h
+++ b/arch/arm/mach-omap2/clock.h
@@ -183,8 +183,6 @@ struct clksel {
u32 omap3_dpll_autoidle_read(struct clk_hw_omap *clk);
void omap3_dpll_allow_idle(struct clk_hw_omap *clk);
void omap3_dpll_deny_idle(struct clk_hw_omap *clk);
-void omap4_dpllmx_allow_gatectrl(struct clk_hw_omap *clk);
-void omap4_dpllmx_deny_gatectrl(struct clk_hw_omap *clk);
void __init omap2_clk_disable_clkdm_control(void);
@@ -204,8 +202,6 @@ int omap2_clksel_set_parent(struct clk_hw *hw, u8 field_val);
extern void omap2_clkt_iclk_allow_idle(struct clk_hw_omap *clk);
extern void omap2_clkt_iclk_deny_idle(struct clk_hw_omap *clk);
-unsigned long omap2_get_dpll_rate(struct clk_hw_omap *clk);
-
void omap2_clk_dflt_find_companion(struct clk_hw_omap *clk,
void __iomem **other_reg,
u8 *other_bit);
diff --git a/arch/arm/mach-omap2/dpll44xx.c b/arch/arm/mach-omap2/dpll44xx.c
deleted file mode 100644
index f231be0..0000000
--- a/arch/arm/mach-omap2/dpll44xx.c
+++ /dev/null
@@ -1,232 +0,0 @@
-/*
- * OMAP4-specific DPLL control functions
- *
- * Copyright (C) 2011 Texas Instruments, Inc.
- * Rajendra Nayak
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-#include <linux/bitops.h>
-
-#include "clock.h"
-
-/*
- * Maximum DPLL input frequency (FINT) and output frequency (FOUT) that
- * can supported when using the DPLL low-power mode. Frequencies are
- * defined in OMAP4430/60 Public TRM section 3.6.3.3.2 "Enable Control,
- * Status, and Low-Power Operation Mode".
- */
-#define OMAP4_DPLL_LP_FINT_MAX 1000000
-#define OMAP4_DPLL_LP_FOUT_MAX 100000000
-
-/*
- * Bitfield declarations
- */
-#define OMAP4430_DPLL_CLKOUT_GATE_CTRL_MASK (1 << 8)
-#define OMAP4430_DPLL_CLKOUTX2_GATE_CTRL_MASK (1 << 10)
-#define OMAP4430_DPLL_REGM4XEN_MASK (1 << 11)
-
-/* Static rate multiplier for OMAP4 REGM4XEN clocks */
-#define OMAP4430_REGM4XEN_MULT 4
-
-void omap4_dpllmx_allow_gatectrl(struct clk_hw_omap *clk)
-{
- u32 v;
- u32 mask;
-
- if (!clk || !clk->clksel_reg)
- return;
-
- mask = clk->flags & CLOCK_CLKOUTX2 ?
- OMAP4430_DPLL_CLKOUTX2_GATE_CTRL_MASK :
- OMAP4430_DPLL_CLKOUT_GATE_CTRL_MASK;
-
- v = omap2_clk_readl(clk, clk->clksel_reg);
- /* Clear the bit to allow gatectrl */
- v &= ~mask;
- omap2_clk_writel(v, clk, clk->clksel_reg);
-}
-
-void omap4_dpllmx_deny_gatectrl(struct clk_hw_omap *clk)
-{
- u32 v;
- u32 mask;
-
- if (!clk || !clk->clksel_reg)
- return;
-
- mask = clk->flags & CLOCK_CLKOUTX2 ?
- OMAP4430_DPLL_CLKOUTX2_GATE_CTRL_MASK :
- OMAP4430_DPLL_CLKOUT_GATE_CTRL_MASK;
-
- v = omap2_clk_readl(clk, clk->clksel_reg);
- /* Set the bit to deny gatectrl */
- v |= mask;
- omap2_clk_writel(v, clk, clk->clksel_reg);
-}
-
-const struct clk_hw_omap_ops clkhwops_omap4_dpllmx = {
- .allow_idle = omap4_dpllmx_allow_gatectrl,
- .deny_idle = omap4_dpllmx_deny_gatectrl,
-};
-
-/**
- * omap4_dpll_lpmode_recalc - compute DPLL low-power setting
- * @dd: pointer to the dpll data structure
- *
- * Calculates if low-power mode can be enabled based upon the last
- * multiplier and divider values calculated. If low-power mode can be
- * enabled, then the bit to enable low-power mode is stored in the
- * last_rounded_lpmode variable. This implementation is based upon the
- * criteria for enabling low-power mode as described in the OMAP4430/60
- * Public TRM section 3.6.3.3.2 "Enable Control, Status, and Low-Power
- * Operation Mode".
- */
-static void omap4_dpll_lpmode_recalc(struct dpll_data *dd)
-{
- long fint, fout;
-
- fint = __clk_get_rate(dd->clk_ref) / (dd->last_rounded_n + 1);
- fout = fint * dd->last_rounded_m;
-
- if ((fint < OMAP4_DPLL_LP_FINT_MAX) && (fout < OMAP4_DPLL_LP_FOUT_MAX))
- dd->last_rounded_lpmode = 1;
- else
- dd->last_rounded_lpmode = 0;
-}
-
-/**
- * omap4_dpll_regm4xen_recalc - compute DPLL rate, considering REGM4XEN bit
- * @clk: struct clk * of the DPLL to compute the rate for
- *
- * Compute the output rate for the OMAP4 DPLL represented by @clk.
- * Takes the REGM4XEN bit into consideration, which is needed for the
- * OMAP4 ABE DPLL. Returns the DPLL's output rate (before M-dividers)
- * upon success, or 0 upon error.
- */
-unsigned long omap4_dpll_regm4xen_recalc(struct clk_hw *hw,
- unsigned long parent_rate)
-{
- struct clk_hw_omap *clk = to_clk_hw_omap(hw);
- u32 v;
- unsigned long rate;
- struct dpll_data *dd;
-
- if (!clk || !clk->dpll_data)
- return 0;
-
- dd = clk->dpll_data;
-
- rate = omap2_get_dpll_rate(clk);
-
- /* regm4xen adds a multiplier of 4 to DPLL calculations */
- v = omap2_clk_readl(clk, dd->control_reg);
- if (v & OMAP4430_DPLL_REGM4XEN_MASK)
- rate *= OMAP4430_REGM4XEN_MULT;
-
- return rate;
-}
-
-/**
- * omap4_dpll_regm4xen_round_rate - round DPLL rate, considering REGM4XEN bit
- * @clk: struct clk * of the DPLL to round a rate for
- * @target_rate: the desired rate of the DPLL
- *
- * Compute the rate that would be programmed into the DPLL hardware
- * for @clk if set_rate() were to be provided with the rate
- * @target_rate. Takes the REGM4XEN bit into consideration, which is
- * needed for the OMAP4 ABE DPLL. Returns the rounded rate (before
- * M-dividers) upon success, -EINVAL if @clk is null or not a DPLL, or
- * ~0 if an error occurred in omap2_dpll_round_rate().
- */
-long omap4_dpll_regm4xen_round_rate(struct clk_hw *hw,
- unsigned long target_rate,
- unsigned long *parent_rate)
-{
- struct clk_hw_omap *clk = to_clk_hw_omap(hw);
- struct dpll_data *dd;
- long r;
-
- if (!clk || !clk->dpll_data)
- return -EINVAL;
-
- dd = clk->dpll_data;
-
- dd->last_rounded_m4xen = 0;
-
- /*
- * First try to compute the DPLL configuration for
- * target rate without using the 4X multiplier.
- */
- r = omap2_dpll_round_rate(hw, target_rate, NULL);
- if (r != ~0)
- goto out;
-
- /*
- * If we did not find a valid DPLL configuration, try again, but
- * this time see if using the 4X multiplier can help. Enabling the
- * 4X multiplier is equivalent to dividing the target rate by 4.
- */
- r = omap2_dpll_round_rate(hw, target_rate / OMAP4430_REGM4XEN_MULT,
- NULL);
- if (r == ~0)
- return r;
-
- dd->last_rounded_rate *= OMAP4430_REGM4XEN_MULT;
- dd->last_rounded_m4xen = 1;
-
-out:
- omap4_dpll_lpmode_recalc(dd);
-
- return dd->last_rounded_rate;
-}
-
-/**
- * omap4_dpll_regm4xen_determine_rate - determine rate for a DPLL
- * @hw: pointer to the clock to determine rate for
- * @rate: target rate for the DPLL
- * @best_parent_rate: pointer for returning best parent rate
- * @best_parent_clk: pointer for returning best parent clock
- *
- * Determines which DPLL mode to use for reaching a desired rate.
- * Checks whether the DPLL shall be in bypass or locked mode, and if
- * locked, calculates the M,N values for the DPLL via round-rate.
- * Returns a positive clock rate with success, negative error value
- * in failure.
- */
-long omap4_dpll_regm4xen_determine_rate(struct clk_hw *hw, unsigned long rate,
- unsigned long min_rate,
- unsigned long max_rate,
- unsigned long *best_parent_rate,
- struct clk_hw **best_parent_clk)
-{
- struct clk_hw_omap *clk = to_clk_hw_omap(hw);
- struct dpll_data *dd;
-
- if (!hw || !rate)
- return -EINVAL;
-
- dd = clk->dpll_data;
- if (!dd)
- return -EINVAL;
-
- if (__clk_get_rate(dd->clk_bypass) == rate &&
- (dd->modes & (1 << DPLL_LOW_POWER_BYPASS))) {
- *best_parent_clk = __clk_get_hw(dd->clk_bypass);
- } else {
- rate = omap4_dpll_regm4xen_round_rate(hw, rate,
- best_parent_rate);
- *best_parent_clk = __clk_get_hw(dd->clk_ref);
- }
-
- *best_parent_rate = rate;
-
- return rate;
-}
diff --git a/drivers/clk/ti/Makefile b/drivers/clk/ti/Makefile
index 62dae2a..c3ec301 100644
--- a/drivers/clk/ti/Makefile
+++ b/drivers/clk/ti/Makefile
@@ -7,10 +7,10 @@ obj-$(CONFIG_SOC_TI81XX) += $(clk-common) fapll.o clk-816x.o
obj-$(CONFIG_ARCH_OMAP2) += $(clk-common) interface.o clk-2xxx.o
obj-$(CONFIG_ARCH_OMAP3) += $(clk-common) interface.o \
clk-3xxx.o
-obj-$(CONFIG_ARCH_OMAP4) += $(clk-common) clk-44xx.o
-obj-$(CONFIG_SOC_OMAP5) += $(clk-common) clk-54xx.o
+obj-$(CONFIG_ARCH_OMAP4) += $(clk-common) clk-44xx.o dpll44xx.o
+obj-$(CONFIG_SOC_OMAP5) += $(clk-common) clk-54xx.o dpll44xx.o
obj-$(CONFIG_SOC_DRA7XX) += $(clk-common) clk-7xx.o \
- clk-dra7-atl.o
+ clk-dra7-atl.o dpll44xx.o
obj-$(CONFIG_SOC_AM43XX) += $(clk-common) clk-43xx.o
ifdef CONFIG_ATAGS
diff --git a/drivers/clk/ti/clock.h b/drivers/clk/ti/clock.h
index 05ed10a..c75d4b4 100644
--- a/drivers/clk/ti/clock.h
+++ b/drivers/clk/ti/clock.h
@@ -169,6 +169,20 @@ void ti_clk_patch_legacy_clks(struct ti_clk **patch);
struct clk *ti_clk_register_clk(struct ti_clk *setup);
int ti_clk_register_legacy_clks(struct ti_clk_alias *clks);
+extern const struct clk_hw_omap_ops clkhwops_omap4_dpllmx;
+
u8 omap2_init_dpll_parent(struct clk_hw *hw);
+unsigned long omap4_dpll_regm4xen_recalc(struct clk_hw *hw,
+ unsigned long parent_rate);
+long omap4_dpll_regm4xen_round_rate(struct clk_hw *hw,
+ unsigned long target_rate,
+ unsigned long *parent_rate);
+long omap4_dpll_regm4xen_determine_rate(struct clk_hw *hw,
+ unsigned long rate,
+ unsigned long min_rate,
+ unsigned long max_rate,
+ unsigned long *best_parent_rate,
+ struct clk_hw **best_parent_clk);
+
#endif
diff --git a/drivers/clk/ti/dpll44xx.c b/drivers/clk/ti/dpll44xx.c
new file mode 100644
index 0000000..ef1a5b4
--- /dev/null
+++ b/drivers/clk/ti/dpll44xx.c
@@ -0,0 +1,233 @@
+/*
+ * OMAP4-specific DPLL control functions
+ *
+ * Copyright (C) 2011 Texas Instruments, Inc.
+ * Rajendra Nayak
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/bitops.h>
+#include <linux/clk/ti.h>
+
+#include "clock.h"
+
+/*
+ * Maximum DPLL input frequency (FINT) and output frequency (FOUT) that
+ * can supported when using the DPLL low-power mode. Frequencies are
+ * defined in OMAP4430/60 Public TRM section 3.6.3.3.2 "Enable Control,
+ * Status, and Low-Power Operation Mode".
+ */
+#define OMAP4_DPLL_LP_FINT_MAX 1000000
+#define OMAP4_DPLL_LP_FOUT_MAX 100000000
+
+/*
+ * Bitfield declarations
+ */
+#define OMAP4430_DPLL_CLKOUT_GATE_CTRL_MASK BIT(8)
+#define OMAP4430_DPLL_CLKOUTX2_GATE_CTRL_MASK BIT(10)
+#define OMAP4430_DPLL_REGM4XEN_MASK BIT(11)
+
+/* Static rate multiplier for OMAP4 REGM4XEN clocks */
+#define OMAP4430_REGM4XEN_MULT 4
+
+static void omap4_dpllmx_allow_gatectrl(struct clk_hw_omap *clk)
+{
+ u32 v;
+ u32 mask;
+
+ if (!clk || !clk->clksel_reg)
+ return;
+
+ mask = clk->flags & CLOCK_CLKOUTX2 ?
+ OMAP4430_DPLL_CLKOUTX2_GATE_CTRL_MASK :
+ OMAP4430_DPLL_CLKOUT_GATE_CTRL_MASK;
+
+ v = ti_clk_ll_ops->clk_readl(clk->clksel_reg);
+ /* Clear the bit to allow gatectrl */
+ v &= ~mask;
+ ti_clk_ll_ops->clk_writel(v, clk->clksel_reg);
+}
+
+static void omap4_dpllmx_deny_gatectrl(struct clk_hw_omap *clk)
+{
+ u32 v;
+ u32 mask;
+
+ if (!clk || !clk->clksel_reg)
+ return;
+
+ mask = clk->flags & CLOCK_CLKOUTX2 ?
+ OMAP4430_DPLL_CLKOUTX2_GATE_CTRL_MASK :
+ OMAP4430_DPLL_CLKOUT_GATE_CTRL_MASK;
+
+ v = ti_clk_ll_ops->clk_readl(clk->clksel_reg);
+ /* Set the bit to deny gatectrl */
+ v |= mask;
+ ti_clk_ll_ops->clk_writel(v, clk->clksel_reg);
+}
+
+const struct clk_hw_omap_ops clkhwops_omap4_dpllmx = {
+ .allow_idle = omap4_dpllmx_allow_gatectrl,
+ .deny_idle = omap4_dpllmx_deny_gatectrl,
+};
+
+/**
+ * omap4_dpll_lpmode_recalc - compute DPLL low-power setting
+ * @dd: pointer to the dpll data structure
+ *
+ * Calculates if low-power mode can be enabled based upon the last
+ * multiplier and divider values calculated. If low-power mode can be
+ * enabled, then the bit to enable low-power mode is stored in the
+ * last_rounded_lpmode variable. This implementation is based upon the
+ * criteria for enabling low-power mode as described in the OMAP4430/60
+ * Public TRM section 3.6.3.3.2 "Enable Control, Status, and Low-Power
+ * Operation Mode".
+ */
+static void omap4_dpll_lpmode_recalc(struct dpll_data *dd)
+{
+ long fint, fout;
+
+ fint = __clk_get_rate(dd->clk_ref) / (dd->last_rounded_n + 1);
+ fout = fint * dd->last_rounded_m;
+
+ if ((fint < OMAP4_DPLL_LP_FINT_MAX) && (fout < OMAP4_DPLL_LP_FOUT_MAX))
+ dd->last_rounded_lpmode = 1;
+ else
+ dd->last_rounded_lpmode = 0;
+}
+
+/**
+ * omap4_dpll_regm4xen_recalc - compute DPLL rate, considering REGM4XEN bit
+ * @clk: struct clk * of the DPLL to compute the rate for
+ *
+ * Compute the output rate for the OMAP4 DPLL represented by @clk.
+ * Takes the REGM4XEN bit into consideration, which is needed for the
+ * OMAP4 ABE DPLL. Returns the DPLL's output rate (before M-dividers)
+ * upon success, or 0 upon error.
+ */
+unsigned long omap4_dpll_regm4xen_recalc(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ struct clk_hw_omap *clk = to_clk_hw_omap(hw);
+ u32 v;
+ unsigned long rate;
+ struct dpll_data *dd;
+
+ if (!clk || !clk->dpll_data)
+ return 0;
+
+ dd = clk->dpll_data;
+
+ rate = omap2_get_dpll_rate(clk);
+
+ /* regm4xen adds a multiplier of 4 to DPLL calculations */
+ v = ti_clk_ll_ops->clk_readl(dd->control_reg);
+ if (v & OMAP4430_DPLL_REGM4XEN_MASK)
+ rate *= OMAP4430_REGM4XEN_MULT;
+
+ return rate;
+}
+
+/**
+ * omap4_dpll_regm4xen_round_rate - round DPLL rate, considering REGM4XEN bit
+ * @clk: struct clk * of the DPLL to round a rate for
+ * @target_rate: the desired rate of the DPLL
+ *
+ * Compute the rate that would be programmed into the DPLL hardware
+ * for @clk if set_rate() were to be provided with the rate
+ * @target_rate. Takes the REGM4XEN bit into consideration, which is
+ * needed for the OMAP4 ABE DPLL. Returns the rounded rate (before
+ * M-dividers) upon success, -EINVAL if @clk is null or not a DPLL, or
+ * ~0 if an error occurred in omap2_dpll_round_rate().
+ */
+long omap4_dpll_regm4xen_round_rate(struct clk_hw *hw,
+ unsigned long target_rate,
+ unsigned long *parent_rate)
+{
+ struct clk_hw_omap *clk = to_clk_hw_omap(hw);
+ struct dpll_data *dd;
+ long r;
+
+ if (!clk || !clk->dpll_data)
+ return -EINVAL;
+
+ dd = clk->dpll_data;
+
+ dd->last_rounded_m4xen = 0;
+
+ /*
+ * First try to compute the DPLL configuration for
+ * target rate without using the 4X multiplier.
+ */
+ r = omap2_dpll_round_rate(hw, target_rate, NULL);
+ if (r != ~0)
+ goto out;
+
+ /*
+ * If we did not find a valid DPLL configuration, try again, but
+ * this time see if using the 4X multiplier can help. Enabling the
+ * 4X multiplier is equivalent to dividing the target rate by 4.
+ */
+ r = omap2_dpll_round_rate(hw, target_rate / OMAP4430_REGM4XEN_MULT,
+ NULL);
+ if (r == ~0)
+ return r;
+
+ dd->last_rounded_rate *= OMAP4430_REGM4XEN_MULT;
+ dd->last_rounded_m4xen = 1;
+
+out:
+ omap4_dpll_lpmode_recalc(dd);
+
+ return dd->last_rounded_rate;
+}
+
+/**
+ * omap4_dpll_regm4xen_determine_rate - determine rate for a DPLL
+ * @hw: pointer to the clock to determine rate for
+ * @rate: target rate for the DPLL
+ * @best_parent_rate: pointer for returning best parent rate
+ * @best_parent_clk: pointer for returning best parent clock
+ *
+ * Determines which DPLL mode to use for reaching a desired rate.
+ * Checks whether the DPLL shall be in bypass or locked mode, and if
+ * locked, calculates the M,N values for the DPLL via round-rate.
+ * Returns a positive clock rate with success, negative error value
+ * in failure.
+ */
+long omap4_dpll_regm4xen_determine_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long min_rate,
+ unsigned long max_rate,
+ unsigned long *best_parent_rate,
+ struct clk_hw **best_parent_clk)
+{
+ struct clk_hw_omap *clk = to_clk_hw_omap(hw);
+ struct dpll_data *dd;
+
+ if (!hw || !rate)
+ return -EINVAL;
+
+ dd = clk->dpll_data;
+ if (!dd)
+ return -EINVAL;
+
+ if (__clk_get_rate(dd->clk_bypass) == rate &&
+ (dd->modes & (1 << DPLL_LOW_POWER_BYPASS))) {
+ *best_parent_clk = __clk_get_hw(dd->clk_bypass);
+ } else {
+ rate = omap4_dpll_regm4xen_round_rate(hw, rate,
+ best_parent_rate);
+ *best_parent_clk = __clk_get_hw(dd->clk_ref);
+ }
+
+ *best_parent_rate = rate;
+
+ return rate;
+}
diff --git a/include/linux/clk/ti.h b/include/linux/clk/ti.h
index f2436b2..89deddf 100644
--- a/include/linux/clk/ti.h
+++ b/include/linux/clk/ti.h
@@ -275,17 +275,6 @@ long omap3_noncore_dpll_determine_rate(struct clk_hw *hw,
unsigned long max_rate,
unsigned long *best_parent_rate,
struct clk_hw **best_parent_clk);
-unsigned long omap4_dpll_regm4xen_recalc(struct clk_hw *hw,
- unsigned long parent_rate);
-long omap4_dpll_regm4xen_round_rate(struct clk_hw *hw,
- unsigned long target_rate,
- unsigned long *parent_rate);
-long omap4_dpll_regm4xen_determine_rate(struct clk_hw *hw,
- unsigned long rate,
- unsigned long min_rate,
- unsigned long max_rate,
- unsigned long *best_parent_rate,
- struct clk_hw **best_parent_clk);
unsigned long omap3_dpll_recalc(struct clk_hw *hw, unsigned long parent_rate);
long omap2_dpll_round_rate(struct clk_hw *hw, unsigned long target_rate,
unsigned long *parent_rate);
@@ -314,6 +303,7 @@ int omap2_reprogram_dpllcore(struct clk_hw *clk, unsigned long rate,
unsigned long parent_rate);
void omap2xxx_clkt_dpllcore_init(struct clk_hw *hw);
void omap2xxx_clkt_vps_init(void);
+unsigned long omap2_get_dpll_rate(struct clk_hw_omap *clk);
void __iomem *ti_clk_get_reg_addr(struct device_node *node, int index);
void ti_dt_clocks_register(struct ti_dt_clk *oclks);
@@ -364,7 +354,6 @@ static inline void of_ti_clk_deny_autoidle_all(void) { }
extern const struct clk_hw_omap_ops clkhwops_omap2xxx_dpll;
extern const struct clk_hw_omap_ops clkhwops_omap2430_i2chs_wait;
extern const struct clk_hw_omap_ops clkhwops_omap3_dpll;
-extern const struct clk_hw_omap_ops clkhwops_omap4_dpllmx;
extern const struct clk_hw_omap_ops clkhwops_wait;
extern const struct clk_hw_omap_ops clkhwops_omap3430es2_dss_usbhost_wait;
extern const struct clk_hw_omap_ops clkhwops_am35xx_ipss_module_wait;
--
1.7.9.5
^ permalink raw reply related [flat|nested] 120+ messages in thread
* [PATCHv2 03/27] clk: ti: move OMAP4+ DPLL implementation under drivers/clk
@ 2015-05-11 8:54 ` Tero Kristo
0 siblings, 0 replies; 120+ messages in thread
From: Tero Kristo @ 2015-05-11 8:54 UTC (permalink / raw)
To: linux-arm-kernel
With the legacy clock support gone, the OMAP4 specific DPLL implementations
can be moved under the clock driver. Change some of the function prototypes
to be static at the same time, and remove some exports from the global TI
clock driver header.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
---
arch/arm/mach-omap2/Makefile | 6 +-
arch/arm/mach-omap2/clock.h | 4 -
arch/arm/mach-omap2/dpll44xx.c | 232 ---------------------------------------
drivers/clk/ti/Makefile | 6 +-
drivers/clk/ti/clock.h | 14 +++
drivers/clk/ti/dpll44xx.c | 233 ++++++++++++++++++++++++++++++++++++++++
include/linux/clk/ti.h | 13 +--
7 files changed, 254 insertions(+), 254 deletions(-)
delete mode 100644 arch/arm/mach-omap2/dpll44xx.c
create mode 100644 drivers/clk/ti/dpll44xx.c
diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
index fcb5d47..5bcd282 100644
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -193,12 +193,12 @@ obj-$(CONFIG_ARCH_OMAP3) += clock3517.o clock36xx.o
obj-$(CONFIG_ARCH_OMAP3) += dpll3xxx.o
obj-$(CONFIG_ARCH_OMAP3) += clkt_iclk.o
obj-$(CONFIG_ARCH_OMAP4) += $(clock-common)
-obj-$(CONFIG_ARCH_OMAP4) += dpll3xxx.o dpll44xx.o
+obj-$(CONFIG_ARCH_OMAP4) += dpll3xxx.o
obj-$(CONFIG_SOC_AM33XX) += $(clock-common) dpll3xxx.o
obj-$(CONFIG_SOC_OMAP5) += $(clock-common)
-obj-$(CONFIG_SOC_OMAP5) += dpll3xxx.o dpll44xx.o
+obj-$(CONFIG_SOC_OMAP5) += dpll3xxx.o
obj-$(CONFIG_SOC_DRA7XX) += $(clock-common)
-obj-$(CONFIG_SOC_DRA7XX) += dpll3xxx.o dpll44xx.o
+obj-$(CONFIG_SOC_DRA7XX) += dpll3xxx.o
obj-$(CONFIG_SOC_AM43XX) += $(clock-common) dpll3xxx.o
# OMAP2 clock rate set data (old "OPP" data)
diff --git a/arch/arm/mach-omap2/clock.h b/arch/arm/mach-omap2/clock.h
index ac21856..d7ed244 100644
--- a/arch/arm/mach-omap2/clock.h
+++ b/arch/arm/mach-omap2/clock.h
@@ -183,8 +183,6 @@ struct clksel {
u32 omap3_dpll_autoidle_read(struct clk_hw_omap *clk);
void omap3_dpll_allow_idle(struct clk_hw_omap *clk);
void omap3_dpll_deny_idle(struct clk_hw_omap *clk);
-void omap4_dpllmx_allow_gatectrl(struct clk_hw_omap *clk);
-void omap4_dpllmx_deny_gatectrl(struct clk_hw_omap *clk);
void __init omap2_clk_disable_clkdm_control(void);
@@ -204,8 +202,6 @@ int omap2_clksel_set_parent(struct clk_hw *hw, u8 field_val);
extern void omap2_clkt_iclk_allow_idle(struct clk_hw_omap *clk);
extern void omap2_clkt_iclk_deny_idle(struct clk_hw_omap *clk);
-unsigned long omap2_get_dpll_rate(struct clk_hw_omap *clk);
-
void omap2_clk_dflt_find_companion(struct clk_hw_omap *clk,
void __iomem **other_reg,
u8 *other_bit);
diff --git a/arch/arm/mach-omap2/dpll44xx.c b/arch/arm/mach-omap2/dpll44xx.c
deleted file mode 100644
index f231be0..0000000
--- a/arch/arm/mach-omap2/dpll44xx.c
+++ /dev/null
@@ -1,232 +0,0 @@
-/*
- * OMAP4-specific DPLL control functions
- *
- * Copyright (C) 2011 Texas Instruments, Inc.
- * Rajendra Nayak
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-#include <linux/bitops.h>
-
-#include "clock.h"
-
-/*
- * Maximum DPLL input frequency (FINT) and output frequency (FOUT) that
- * can supported when using the DPLL low-power mode. Frequencies are
- * defined in OMAP4430/60 Public TRM section 3.6.3.3.2 "Enable Control,
- * Status, and Low-Power Operation Mode".
- */
-#define OMAP4_DPLL_LP_FINT_MAX 1000000
-#define OMAP4_DPLL_LP_FOUT_MAX 100000000
-
-/*
- * Bitfield declarations
- */
-#define OMAP4430_DPLL_CLKOUT_GATE_CTRL_MASK (1 << 8)
-#define OMAP4430_DPLL_CLKOUTX2_GATE_CTRL_MASK (1 << 10)
-#define OMAP4430_DPLL_REGM4XEN_MASK (1 << 11)
-
-/* Static rate multiplier for OMAP4 REGM4XEN clocks */
-#define OMAP4430_REGM4XEN_MULT 4
-
-void omap4_dpllmx_allow_gatectrl(struct clk_hw_omap *clk)
-{
- u32 v;
- u32 mask;
-
- if (!clk || !clk->clksel_reg)
- return;
-
- mask = clk->flags & CLOCK_CLKOUTX2 ?
- OMAP4430_DPLL_CLKOUTX2_GATE_CTRL_MASK :
- OMAP4430_DPLL_CLKOUT_GATE_CTRL_MASK;
-
- v = omap2_clk_readl(clk, clk->clksel_reg);
- /* Clear the bit to allow gatectrl */
- v &= ~mask;
- omap2_clk_writel(v, clk, clk->clksel_reg);
-}
-
-void omap4_dpllmx_deny_gatectrl(struct clk_hw_omap *clk)
-{
- u32 v;
- u32 mask;
-
- if (!clk || !clk->clksel_reg)
- return;
-
- mask = clk->flags & CLOCK_CLKOUTX2 ?
- OMAP4430_DPLL_CLKOUTX2_GATE_CTRL_MASK :
- OMAP4430_DPLL_CLKOUT_GATE_CTRL_MASK;
-
- v = omap2_clk_readl(clk, clk->clksel_reg);
- /* Set the bit to deny gatectrl */
- v |= mask;
- omap2_clk_writel(v, clk, clk->clksel_reg);
-}
-
-const struct clk_hw_omap_ops clkhwops_omap4_dpllmx = {
- .allow_idle = omap4_dpllmx_allow_gatectrl,
- .deny_idle = omap4_dpllmx_deny_gatectrl,
-};
-
-/**
- * omap4_dpll_lpmode_recalc - compute DPLL low-power setting
- * @dd: pointer to the dpll data structure
- *
- * Calculates if low-power mode can be enabled based upon the last
- * multiplier and divider values calculated. If low-power mode can be
- * enabled, then the bit to enable low-power mode is stored in the
- * last_rounded_lpmode variable. This implementation is based upon the
- * criteria for enabling low-power mode as described in the OMAP4430/60
- * Public TRM section 3.6.3.3.2 "Enable Control, Status, and Low-Power
- * Operation Mode".
- */
-static void omap4_dpll_lpmode_recalc(struct dpll_data *dd)
-{
- long fint, fout;
-
- fint = __clk_get_rate(dd->clk_ref) / (dd->last_rounded_n + 1);
- fout = fint * dd->last_rounded_m;
-
- if ((fint < OMAP4_DPLL_LP_FINT_MAX) && (fout < OMAP4_DPLL_LP_FOUT_MAX))
- dd->last_rounded_lpmode = 1;
- else
- dd->last_rounded_lpmode = 0;
-}
-
-/**
- * omap4_dpll_regm4xen_recalc - compute DPLL rate, considering REGM4XEN bit
- * @clk: struct clk * of the DPLL to compute the rate for
- *
- * Compute the output rate for the OMAP4 DPLL represented by @clk.
- * Takes the REGM4XEN bit into consideration, which is needed for the
- * OMAP4 ABE DPLL. Returns the DPLL's output rate (before M-dividers)
- * upon success, or 0 upon error.
- */
-unsigned long omap4_dpll_regm4xen_recalc(struct clk_hw *hw,
- unsigned long parent_rate)
-{
- struct clk_hw_omap *clk = to_clk_hw_omap(hw);
- u32 v;
- unsigned long rate;
- struct dpll_data *dd;
-
- if (!clk || !clk->dpll_data)
- return 0;
-
- dd = clk->dpll_data;
-
- rate = omap2_get_dpll_rate(clk);
-
- /* regm4xen adds a multiplier of 4 to DPLL calculations */
- v = omap2_clk_readl(clk, dd->control_reg);
- if (v & OMAP4430_DPLL_REGM4XEN_MASK)
- rate *= OMAP4430_REGM4XEN_MULT;
-
- return rate;
-}
-
-/**
- * omap4_dpll_regm4xen_round_rate - round DPLL rate, considering REGM4XEN bit
- * @clk: struct clk * of the DPLL to round a rate for
- * @target_rate: the desired rate of the DPLL
- *
- * Compute the rate that would be programmed into the DPLL hardware
- * for @clk if set_rate() were to be provided with the rate
- * @target_rate. Takes the REGM4XEN bit into consideration, which is
- * needed for the OMAP4 ABE DPLL. Returns the rounded rate (before
- * M-dividers) upon success, -EINVAL if @clk is null or not a DPLL, or
- * ~0 if an error occurred in omap2_dpll_round_rate().
- */
-long omap4_dpll_regm4xen_round_rate(struct clk_hw *hw,
- unsigned long target_rate,
- unsigned long *parent_rate)
-{
- struct clk_hw_omap *clk = to_clk_hw_omap(hw);
- struct dpll_data *dd;
- long r;
-
- if (!clk || !clk->dpll_data)
- return -EINVAL;
-
- dd = clk->dpll_data;
-
- dd->last_rounded_m4xen = 0;
-
- /*
- * First try to compute the DPLL configuration for
- * target rate without using the 4X multiplier.
- */
- r = omap2_dpll_round_rate(hw, target_rate, NULL);
- if (r != ~0)
- goto out;
-
- /*
- * If we did not find a valid DPLL configuration, try again, but
- * this time see if using the 4X multiplier can help. Enabling the
- * 4X multiplier is equivalent to dividing the target rate by 4.
- */
- r = omap2_dpll_round_rate(hw, target_rate / OMAP4430_REGM4XEN_MULT,
- NULL);
- if (r == ~0)
- return r;
-
- dd->last_rounded_rate *= OMAP4430_REGM4XEN_MULT;
- dd->last_rounded_m4xen = 1;
-
-out:
- omap4_dpll_lpmode_recalc(dd);
-
- return dd->last_rounded_rate;
-}
-
-/**
- * omap4_dpll_regm4xen_determine_rate - determine rate for a DPLL
- * @hw: pointer to the clock to determine rate for
- * @rate: target rate for the DPLL
- * @best_parent_rate: pointer for returning best parent rate
- * @best_parent_clk: pointer for returning best parent clock
- *
- * Determines which DPLL mode to use for reaching a desired rate.
- * Checks whether the DPLL shall be in bypass or locked mode, and if
- * locked, calculates the M,N values for the DPLL via round-rate.
- * Returns a positive clock rate with success, negative error value
- * in failure.
- */
-long omap4_dpll_regm4xen_determine_rate(struct clk_hw *hw, unsigned long rate,
- unsigned long min_rate,
- unsigned long max_rate,
- unsigned long *best_parent_rate,
- struct clk_hw **best_parent_clk)
-{
- struct clk_hw_omap *clk = to_clk_hw_omap(hw);
- struct dpll_data *dd;
-
- if (!hw || !rate)
- return -EINVAL;
-
- dd = clk->dpll_data;
- if (!dd)
- return -EINVAL;
-
- if (__clk_get_rate(dd->clk_bypass) == rate &&
- (dd->modes & (1 << DPLL_LOW_POWER_BYPASS))) {
- *best_parent_clk = __clk_get_hw(dd->clk_bypass);
- } else {
- rate = omap4_dpll_regm4xen_round_rate(hw, rate,
- best_parent_rate);
- *best_parent_clk = __clk_get_hw(dd->clk_ref);
- }
-
- *best_parent_rate = rate;
-
- return rate;
-}
diff --git a/drivers/clk/ti/Makefile b/drivers/clk/ti/Makefile
index 62dae2a..c3ec301 100644
--- a/drivers/clk/ti/Makefile
+++ b/drivers/clk/ti/Makefile
@@ -7,10 +7,10 @@ obj-$(CONFIG_SOC_TI81XX) += $(clk-common) fapll.o clk-816x.o
obj-$(CONFIG_ARCH_OMAP2) += $(clk-common) interface.o clk-2xxx.o
obj-$(CONFIG_ARCH_OMAP3) += $(clk-common) interface.o \
clk-3xxx.o
-obj-$(CONFIG_ARCH_OMAP4) += $(clk-common) clk-44xx.o
-obj-$(CONFIG_SOC_OMAP5) += $(clk-common) clk-54xx.o
+obj-$(CONFIG_ARCH_OMAP4) += $(clk-common) clk-44xx.o dpll44xx.o
+obj-$(CONFIG_SOC_OMAP5) += $(clk-common) clk-54xx.o dpll44xx.o
obj-$(CONFIG_SOC_DRA7XX) += $(clk-common) clk-7xx.o \
- clk-dra7-atl.o
+ clk-dra7-atl.o dpll44xx.o
obj-$(CONFIG_SOC_AM43XX) += $(clk-common) clk-43xx.o
ifdef CONFIG_ATAGS
diff --git a/drivers/clk/ti/clock.h b/drivers/clk/ti/clock.h
index 05ed10a..c75d4b4 100644
--- a/drivers/clk/ti/clock.h
+++ b/drivers/clk/ti/clock.h
@@ -169,6 +169,20 @@ void ti_clk_patch_legacy_clks(struct ti_clk **patch);
struct clk *ti_clk_register_clk(struct ti_clk *setup);
int ti_clk_register_legacy_clks(struct ti_clk_alias *clks);
+extern const struct clk_hw_omap_ops clkhwops_omap4_dpllmx;
+
u8 omap2_init_dpll_parent(struct clk_hw *hw);
+unsigned long omap4_dpll_regm4xen_recalc(struct clk_hw *hw,
+ unsigned long parent_rate);
+long omap4_dpll_regm4xen_round_rate(struct clk_hw *hw,
+ unsigned long target_rate,
+ unsigned long *parent_rate);
+long omap4_dpll_regm4xen_determine_rate(struct clk_hw *hw,
+ unsigned long rate,
+ unsigned long min_rate,
+ unsigned long max_rate,
+ unsigned long *best_parent_rate,
+ struct clk_hw **best_parent_clk);
+
#endif
diff --git a/drivers/clk/ti/dpll44xx.c b/drivers/clk/ti/dpll44xx.c
new file mode 100644
index 0000000..ef1a5b4
--- /dev/null
+++ b/drivers/clk/ti/dpll44xx.c
@@ -0,0 +1,233 @@
+/*
+ * OMAP4-specific DPLL control functions
+ *
+ * Copyright (C) 2011 Texas Instruments, Inc.
+ * Rajendra Nayak
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/bitops.h>
+#include <linux/clk/ti.h>
+
+#include "clock.h"
+
+/*
+ * Maximum DPLL input frequency (FINT) and output frequency (FOUT) that
+ * can supported when using the DPLL low-power mode. Frequencies are
+ * defined in OMAP4430/60 Public TRM section 3.6.3.3.2 "Enable Control,
+ * Status, and Low-Power Operation Mode".
+ */
+#define OMAP4_DPLL_LP_FINT_MAX 1000000
+#define OMAP4_DPLL_LP_FOUT_MAX 100000000
+
+/*
+ * Bitfield declarations
+ */
+#define OMAP4430_DPLL_CLKOUT_GATE_CTRL_MASK BIT(8)
+#define OMAP4430_DPLL_CLKOUTX2_GATE_CTRL_MASK BIT(10)
+#define OMAP4430_DPLL_REGM4XEN_MASK BIT(11)
+
+/* Static rate multiplier for OMAP4 REGM4XEN clocks */
+#define OMAP4430_REGM4XEN_MULT 4
+
+static void omap4_dpllmx_allow_gatectrl(struct clk_hw_omap *clk)
+{
+ u32 v;
+ u32 mask;
+
+ if (!clk || !clk->clksel_reg)
+ return;
+
+ mask = clk->flags & CLOCK_CLKOUTX2 ?
+ OMAP4430_DPLL_CLKOUTX2_GATE_CTRL_MASK :
+ OMAP4430_DPLL_CLKOUT_GATE_CTRL_MASK;
+
+ v = ti_clk_ll_ops->clk_readl(clk->clksel_reg);
+ /* Clear the bit to allow gatectrl */
+ v &= ~mask;
+ ti_clk_ll_ops->clk_writel(v, clk->clksel_reg);
+}
+
+static void omap4_dpllmx_deny_gatectrl(struct clk_hw_omap *clk)
+{
+ u32 v;
+ u32 mask;
+
+ if (!clk || !clk->clksel_reg)
+ return;
+
+ mask = clk->flags & CLOCK_CLKOUTX2 ?
+ OMAP4430_DPLL_CLKOUTX2_GATE_CTRL_MASK :
+ OMAP4430_DPLL_CLKOUT_GATE_CTRL_MASK;
+
+ v = ti_clk_ll_ops->clk_readl(clk->clksel_reg);
+ /* Set the bit to deny gatectrl */
+ v |= mask;
+ ti_clk_ll_ops->clk_writel(v, clk->clksel_reg);
+}
+
+const struct clk_hw_omap_ops clkhwops_omap4_dpllmx = {
+ .allow_idle = omap4_dpllmx_allow_gatectrl,
+ .deny_idle = omap4_dpllmx_deny_gatectrl,
+};
+
+/**
+ * omap4_dpll_lpmode_recalc - compute DPLL low-power setting
+ * @dd: pointer to the dpll data structure
+ *
+ * Calculates if low-power mode can be enabled based upon the last
+ * multiplier and divider values calculated. If low-power mode can be
+ * enabled, then the bit to enable low-power mode is stored in the
+ * last_rounded_lpmode variable. This implementation is based upon the
+ * criteria for enabling low-power mode as described in the OMAP4430/60
+ * Public TRM section 3.6.3.3.2 "Enable Control, Status, and Low-Power
+ * Operation Mode".
+ */
+static void omap4_dpll_lpmode_recalc(struct dpll_data *dd)
+{
+ long fint, fout;
+
+ fint = __clk_get_rate(dd->clk_ref) / (dd->last_rounded_n + 1);
+ fout = fint * dd->last_rounded_m;
+
+ if ((fint < OMAP4_DPLL_LP_FINT_MAX) && (fout < OMAP4_DPLL_LP_FOUT_MAX))
+ dd->last_rounded_lpmode = 1;
+ else
+ dd->last_rounded_lpmode = 0;
+}
+
+/**
+ * omap4_dpll_regm4xen_recalc - compute DPLL rate, considering REGM4XEN bit
+ * @clk: struct clk * of the DPLL to compute the rate for
+ *
+ * Compute the output rate for the OMAP4 DPLL represented by @clk.
+ * Takes the REGM4XEN bit into consideration, which is needed for the
+ * OMAP4 ABE DPLL. Returns the DPLL's output rate (before M-dividers)
+ * upon success, or 0 upon error.
+ */
+unsigned long omap4_dpll_regm4xen_recalc(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ struct clk_hw_omap *clk = to_clk_hw_omap(hw);
+ u32 v;
+ unsigned long rate;
+ struct dpll_data *dd;
+
+ if (!clk || !clk->dpll_data)
+ return 0;
+
+ dd = clk->dpll_data;
+
+ rate = omap2_get_dpll_rate(clk);
+
+ /* regm4xen adds a multiplier of 4 to DPLL calculations */
+ v = ti_clk_ll_ops->clk_readl(dd->control_reg);
+ if (v & OMAP4430_DPLL_REGM4XEN_MASK)
+ rate *= OMAP4430_REGM4XEN_MULT;
+
+ return rate;
+}
+
+/**
+ * omap4_dpll_regm4xen_round_rate - round DPLL rate, considering REGM4XEN bit
+ * @clk: struct clk * of the DPLL to round a rate for
+ * @target_rate: the desired rate of the DPLL
+ *
+ * Compute the rate that would be programmed into the DPLL hardware
+ * for @clk if set_rate() were to be provided with the rate
+ * @target_rate. Takes the REGM4XEN bit into consideration, which is
+ * needed for the OMAP4 ABE DPLL. Returns the rounded rate (before
+ * M-dividers) upon success, -EINVAL if @clk is null or not a DPLL, or
+ * ~0 if an error occurred in omap2_dpll_round_rate().
+ */
+long omap4_dpll_regm4xen_round_rate(struct clk_hw *hw,
+ unsigned long target_rate,
+ unsigned long *parent_rate)
+{
+ struct clk_hw_omap *clk = to_clk_hw_omap(hw);
+ struct dpll_data *dd;
+ long r;
+
+ if (!clk || !clk->dpll_data)
+ return -EINVAL;
+
+ dd = clk->dpll_data;
+
+ dd->last_rounded_m4xen = 0;
+
+ /*
+ * First try to compute the DPLL configuration for
+ * target rate without using the 4X multiplier.
+ */
+ r = omap2_dpll_round_rate(hw, target_rate, NULL);
+ if (r != ~0)
+ goto out;
+
+ /*
+ * If we did not find a valid DPLL configuration, try again, but
+ * this time see if using the 4X multiplier can help. Enabling the
+ * 4X multiplier is equivalent to dividing the target rate by 4.
+ */
+ r = omap2_dpll_round_rate(hw, target_rate / OMAP4430_REGM4XEN_MULT,
+ NULL);
+ if (r == ~0)
+ return r;
+
+ dd->last_rounded_rate *= OMAP4430_REGM4XEN_MULT;
+ dd->last_rounded_m4xen = 1;
+
+out:
+ omap4_dpll_lpmode_recalc(dd);
+
+ return dd->last_rounded_rate;
+}
+
+/**
+ * omap4_dpll_regm4xen_determine_rate - determine rate for a DPLL
+ * @hw: pointer to the clock to determine rate for
+ * @rate: target rate for the DPLL
+ * @best_parent_rate: pointer for returning best parent rate
+ * @best_parent_clk: pointer for returning best parent clock
+ *
+ * Determines which DPLL mode to use for reaching a desired rate.
+ * Checks whether the DPLL shall be in bypass or locked mode, and if
+ * locked, calculates the M,N values for the DPLL via round-rate.
+ * Returns a positive clock rate with success, negative error value
+ * in failure.
+ */
+long omap4_dpll_regm4xen_determine_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long min_rate,
+ unsigned long max_rate,
+ unsigned long *best_parent_rate,
+ struct clk_hw **best_parent_clk)
+{
+ struct clk_hw_omap *clk = to_clk_hw_omap(hw);
+ struct dpll_data *dd;
+
+ if (!hw || !rate)
+ return -EINVAL;
+
+ dd = clk->dpll_data;
+ if (!dd)
+ return -EINVAL;
+
+ if (__clk_get_rate(dd->clk_bypass) == rate &&
+ (dd->modes & (1 << DPLL_LOW_POWER_BYPASS))) {
+ *best_parent_clk = __clk_get_hw(dd->clk_bypass);
+ } else {
+ rate = omap4_dpll_regm4xen_round_rate(hw, rate,
+ best_parent_rate);
+ *best_parent_clk = __clk_get_hw(dd->clk_ref);
+ }
+
+ *best_parent_rate = rate;
+
+ return rate;
+}
diff --git a/include/linux/clk/ti.h b/include/linux/clk/ti.h
index f2436b2..89deddf 100644
--- a/include/linux/clk/ti.h
+++ b/include/linux/clk/ti.h
@@ -275,17 +275,6 @@ long omap3_noncore_dpll_determine_rate(struct clk_hw *hw,
unsigned long max_rate,
unsigned long *best_parent_rate,
struct clk_hw **best_parent_clk);
-unsigned long omap4_dpll_regm4xen_recalc(struct clk_hw *hw,
- unsigned long parent_rate);
-long omap4_dpll_regm4xen_round_rate(struct clk_hw *hw,
- unsigned long target_rate,
- unsigned long *parent_rate);
-long omap4_dpll_regm4xen_determine_rate(struct clk_hw *hw,
- unsigned long rate,
- unsigned long min_rate,
- unsigned long max_rate,
- unsigned long *best_parent_rate,
- struct clk_hw **best_parent_clk);
unsigned long omap3_dpll_recalc(struct clk_hw *hw, unsigned long parent_rate);
long omap2_dpll_round_rate(struct clk_hw *hw, unsigned long target_rate,
unsigned long *parent_rate);
@@ -314,6 +303,7 @@ int omap2_reprogram_dpllcore(struct clk_hw *clk, unsigned long rate,
unsigned long parent_rate);
void omap2xxx_clkt_dpllcore_init(struct clk_hw *hw);
void omap2xxx_clkt_vps_init(void);
+unsigned long omap2_get_dpll_rate(struct clk_hw_omap *clk);
void __iomem *ti_clk_get_reg_addr(struct device_node *node, int index);
void ti_dt_clocks_register(struct ti_dt_clk *oclks);
@@ -364,7 +354,6 @@ static inline void of_ti_clk_deny_autoidle_all(void) { }
extern const struct clk_hw_omap_ops clkhwops_omap2xxx_dpll;
extern const struct clk_hw_omap_ops clkhwops_omap2430_i2chs_wait;
extern const struct clk_hw_omap_ops clkhwops_omap3_dpll;
-extern const struct clk_hw_omap_ops clkhwops_omap4_dpllmx;
extern const struct clk_hw_omap_ops clkhwops_wait;
extern const struct clk_hw_omap_ops clkhwops_omap3430es2_dss_usbhost_wait;
extern const struct clk_hw_omap_ops clkhwops_am35xx_ipss_module_wait;
--
1.7.9.5
^ permalink raw reply related [flat|nested] 120+ messages in thread
* [PATCHv2 04/27] clk: ti: move interface clock implementation under drivers/clk
2015-05-11 8:54 ` Tero Kristo
(?)
@ 2015-05-11 8:54 ` Tero Kristo
-1 siblings, 0 replies; 120+ messages in thread
From: Tero Kristo @ 2015-05-11 8:54 UTC (permalink / raw)
To: mturquette, tony, linux-omap, linux-clk, sboyd, paul; +Cc: linux-arm-kernel
With the legacy clock support gone, the OMAP interface clock implementation
can be moved under the clock driver. Some temporary header file tweaks are
also needed to make this change work properly.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
---
arch/arm/mach-omap2/Makefile | 3 +-
arch/arm/mach-omap2/clkt_iclk.c | 68 ---------------------------------------
arch/arm/mach-omap2/clock.h | 11 -------
drivers/clk/ti/Makefile | 2 +-
drivers/clk/ti/clkt_iclk.c | 66 +++++++++++++++++++++++++++++++++++++
drivers/clk/ti/clock.h | 2 ++
include/linux/clk/ti.h | 10 ++++--
7 files changed, 78 insertions(+), 84 deletions(-)
delete mode 100644 arch/arm/mach-omap2/clkt_iclk.c
create mode 100644 drivers/clk/ti/clkt_iclk.c
diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
index 5bcd282..a2f5156 100644
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -185,13 +185,12 @@ obj-$(CONFIG_SOC_DRA7XX) += clockdomains7xx_data.o
obj-$(CONFIG_ARCH_OMAP2) += $(clock-common) clock2xxx.o
obj-$(CONFIG_ARCH_OMAP2) += clkt2xxx_dpllcore.o
obj-$(CONFIG_ARCH_OMAP2) += clkt2xxx_virt_prcm_set.o
-obj-$(CONFIG_ARCH_OMAP2) += clkt2xxx_dpll.o clkt_iclk.o
+obj-$(CONFIG_ARCH_OMAP2) += clkt2xxx_dpll.o
obj-$(CONFIG_SOC_OMAP2430) += clock2430.o
obj-$(CONFIG_ARCH_OMAP3) += $(clock-common) clock3xxx.o
obj-$(CONFIG_ARCH_OMAP3) += clock34xx.o clkt34xx_dpll3m2.o
obj-$(CONFIG_ARCH_OMAP3) += clock3517.o clock36xx.o
obj-$(CONFIG_ARCH_OMAP3) += dpll3xxx.o
-obj-$(CONFIG_ARCH_OMAP3) += clkt_iclk.o
obj-$(CONFIG_ARCH_OMAP4) += $(clock-common)
obj-$(CONFIG_ARCH_OMAP4) += dpll3xxx.o
obj-$(CONFIG_SOC_AM33XX) += $(clock-common) dpll3xxx.o
diff --git a/arch/arm/mach-omap2/clkt_iclk.c b/arch/arm/mach-omap2/clkt_iclk.c
deleted file mode 100644
index 55eb579..0000000
--- a/arch/arm/mach-omap2/clkt_iclk.c
+++ /dev/null
@@ -1,68 +0,0 @@
-/*
- * OMAP2/3 interface clock control
- *
- * Copyright (C) 2011 Nokia Corporation
- * Paul Walmsley
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#undef DEBUG
-
-#include <linux/kernel.h>
-#include <linux/clk-provider.h>
-#include <linux/io.h>
-
-#include "clock.h"
-
-/* Register offsets */
-#define CM_AUTOIDLE 0x30
-#define CM_ICLKEN 0x10
-
-/* Private functions */
-
-/* XXX */
-void omap2_clkt_iclk_allow_idle(struct clk_hw_omap *clk)
-{
- u32 v;
- void __iomem *r;
-
- r = (__force void __iomem *)
- ((__force u32)clk->enable_reg ^ (CM_AUTOIDLE ^ CM_ICLKEN));
-
- v = omap2_clk_readl(clk, r);
- v |= (1 << clk->enable_bit);
- omap2_clk_writel(v, clk, r);
-}
-
-/* XXX */
-void omap2_clkt_iclk_deny_idle(struct clk_hw_omap *clk)
-{
- u32 v;
- void __iomem *r;
-
- r = (__force void __iomem *)
- ((__force u32)clk->enable_reg ^ (CM_AUTOIDLE ^ CM_ICLKEN));
-
- v = omap2_clk_readl(clk, r);
- v &= ~(1 << clk->enable_bit);
- omap2_clk_writel(v, clk, r);
-}
-
-/* Public data */
-
-const struct clk_hw_omap_ops clkhwops_iclk = {
- .allow_idle = omap2_clkt_iclk_allow_idle,
- .deny_idle = omap2_clkt_iclk_deny_idle,
-};
-
-const struct clk_hw_omap_ops clkhwops_iclk_wait = {
- .allow_idle = omap2_clkt_iclk_allow_idle,
- .deny_idle = omap2_clkt_iclk_deny_idle,
- .find_idlest = omap2_clk_dflt_find_idlest,
- .find_companion = omap2_clk_dflt_find_companion,
-};
-
-
-
diff --git a/arch/arm/mach-omap2/clock.h b/arch/arm/mach-omap2/clock.h
index d7ed244..ca8c42c 100644
--- a/arch/arm/mach-omap2/clock.h
+++ b/arch/arm/mach-omap2/clock.h
@@ -198,16 +198,6 @@ int omap2_clksel_set_rate(struct clk_hw *hw, unsigned long rate,
unsigned long parent_rate);
int omap2_clksel_set_parent(struct clk_hw *hw, u8 field_val);
-/* clkt_iclk.c public functions */
-extern void omap2_clkt_iclk_allow_idle(struct clk_hw_omap *clk);
-extern void omap2_clkt_iclk_deny_idle(struct clk_hw_omap *clk);
-
-void omap2_clk_dflt_find_companion(struct clk_hw_omap *clk,
- void __iomem **other_reg,
- u8 *other_bit);
-void omap2_clk_dflt_find_idlest(struct clk_hw_omap *clk,
- void __iomem **idlest_reg,
- u8 *idlest_bit, u8 *idlest_val);
int omap2_clk_enable_autoidle_all(void);
int omap2_clk_allow_idle(struct clk *clk);
int omap2_clk_deny_idle(struct clk *clk);
@@ -231,7 +221,6 @@ extern const struct clksel_rate gpt_sys_rates[];
extern const struct clksel_rate gfx_l3_rates[];
extern const struct clksel_rate dsp_ick_rates[];
-extern const struct clk_hw_omap_ops clkhwops_iclk_wait;
extern const struct clk_hw_omap_ops clkhwops_wait;
extern const struct clk_hw_omap_ops clkhwops_omap3430es2_ssi_wait;
extern const struct clk_hw_omap_ops clkhwops_omap3430es2_dss_usbhost_wait;
diff --git a/drivers/clk/ti/Makefile b/drivers/clk/ti/Makefile
index c3ec301..23cd726 100644
--- a/drivers/clk/ti/Makefile
+++ b/drivers/clk/ti/Makefile
@@ -1,7 +1,7 @@
obj-y += clk.o autoidle.o clockdomain.o
clk-common = dpll.o composite.o divider.o gate.o \
fixed-factor.o mux.o apll.o \
- clkt_dpll.o
+ clkt_dpll.o clkt_iclk.o
obj-$(CONFIG_SOC_AM33XX) += $(clk-common) clk-33xx.o
obj-$(CONFIG_SOC_TI81XX) += $(clk-common) fapll.o clk-816x.o
obj-$(CONFIG_ARCH_OMAP2) += $(clk-common) interface.o clk-2xxx.o
diff --git a/drivers/clk/ti/clkt_iclk.c b/drivers/clk/ti/clkt_iclk.c
new file mode 100644
index 0000000..a03919d
--- /dev/null
+++ b/drivers/clk/ti/clkt_iclk.c
@@ -0,0 +1,66 @@
+/*
+ * OMAP2/3 interface clock control
+ *
+ * Copyright (C) 2011 Nokia Corporation
+ * Paul Walmsley
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#undef DEBUG
+
+#include <linux/kernel.h>
+#include <linux/clk-provider.h>
+#include <linux/io.h>
+#include <linux/clk/ti.h>
+
+#include "clock.h"
+
+/* Register offsets */
+#define CM_AUTOIDLE 0x30
+#define CM_ICLKEN 0x10
+
+/* Private functions */
+
+/* XXX */
+void omap2_clkt_iclk_allow_idle(struct clk_hw_omap *clk)
+{
+ u32 v;
+ void __iomem *r;
+
+ r = (__force void __iomem *)
+ ((__force u32)clk->enable_reg ^ (CM_AUTOIDLE ^ CM_ICLKEN));
+
+ v = ti_clk_ll_ops->clk_readl(r);
+ v |= (1 << clk->enable_bit);
+ ti_clk_ll_ops->clk_writel(v, r);
+}
+
+/* XXX */
+void omap2_clkt_iclk_deny_idle(struct clk_hw_omap *clk)
+{
+ u32 v;
+ void __iomem *r;
+
+ r = (__force void __iomem *)
+ ((__force u32)clk->enable_reg ^ (CM_AUTOIDLE ^ CM_ICLKEN));
+
+ v = ti_clk_ll_ops->clk_readl(r);
+ v &= ~(1 << clk->enable_bit);
+ ti_clk_ll_ops->clk_writel(v, r);
+}
+
+/* Public data */
+
+const struct clk_hw_omap_ops clkhwops_iclk = {
+ .allow_idle = omap2_clkt_iclk_allow_idle,
+ .deny_idle = omap2_clkt_iclk_deny_idle,
+};
+
+const struct clk_hw_omap_ops clkhwops_iclk_wait = {
+ .allow_idle = omap2_clkt_iclk_allow_idle,
+ .deny_idle = omap2_clkt_iclk_deny_idle,
+ .find_idlest = omap2_clk_dflt_find_idlest,
+ .find_companion = omap2_clk_dflt_find_companion,
+};
diff --git a/drivers/clk/ti/clock.h b/drivers/clk/ti/clock.h
index c75d4b4..a7256a9 100644
--- a/drivers/clk/ti/clock.h
+++ b/drivers/clk/ti/clock.h
@@ -170,6 +170,8 @@ struct clk *ti_clk_register_clk(struct ti_clk *setup);
int ti_clk_register_legacy_clks(struct ti_clk_alias *clks);
extern const struct clk_hw_omap_ops clkhwops_omap4_dpllmx;
+extern const struct clk_hw_omap_ops clkhwops_iclk;
+extern const struct clk_hw_omap_ops clkhwops_iclk_wait;
u8 omap2_init_dpll_parent(struct clk_hw *hw);
diff --git a/include/linux/clk/ti.h b/include/linux/clk/ti.h
index 89deddf..63f2945 100644
--- a/include/linux/clk/ti.h
+++ b/include/linux/clk/ti.h
@@ -296,6 +296,14 @@ int omap3_dpll4_set_rate_and_parent(struct clk_hw *hw, unsigned long rate,
int omap2_dflt_clk_enable(struct clk_hw *hw);
void omap2_dflt_clk_disable(struct clk_hw *hw);
int omap2_dflt_clk_is_enabled(struct clk_hw *hw);
+void omap2_clkt_iclk_allow_idle(struct clk_hw_omap *clk);
+void omap2_clkt_iclk_deny_idle(struct clk_hw_omap *clk);
+void omap2_clk_dflt_find_companion(struct clk_hw_omap *clk,
+ void __iomem **other_reg,
+ u8 *other_bit);
+void omap2_clk_dflt_find_idlest(struct clk_hw_omap *clk,
+ void __iomem **idlest_reg,
+ u8 *idlest_bit, u8 *idlest_val);
void omap3_clk_lock_dpll5(void);
unsigned long omap2_dpllcore_recalc(struct clk_hw *hw,
unsigned long parent_rate);
@@ -358,8 +366,6 @@ extern const struct clk_hw_omap_ops clkhwops_wait;
extern const struct clk_hw_omap_ops clkhwops_omap3430es2_dss_usbhost_wait;
extern const struct clk_hw_omap_ops clkhwops_am35xx_ipss_module_wait;
extern const struct clk_hw_omap_ops clkhwops_am35xx_ipss_wait;
-extern const struct clk_hw_omap_ops clkhwops_iclk;
-extern const struct clk_hw_omap_ops clkhwops_iclk_wait;
extern const struct clk_hw_omap_ops clkhwops_omap3430es2_iclk_ssi_wait;
extern const struct clk_hw_omap_ops clkhwops_omap3430es2_iclk_dss_usbhost_wait;
extern const struct clk_hw_omap_ops clkhwops_omap3430es2_iclk_hsotgusb_wait;
--
1.7.9.5
^ permalink raw reply related [flat|nested] 120+ messages in thread
* [PATCHv2 04/27] clk: ti: move interface clock implementation under drivers/clk
@ 2015-05-11 8:54 ` Tero Kristo
0 siblings, 0 replies; 120+ messages in thread
From: Tero Kristo @ 2015-05-11 8:54 UTC (permalink / raw)
To: mturquette, tony, linux-omap, linux-clk, sboyd, paul; +Cc: linux-arm-kernel
With the legacy clock support gone, the OMAP interface clock implementation
can be moved under the clock driver. Some temporary header file tweaks are
also needed to make this change work properly.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
---
arch/arm/mach-omap2/Makefile | 3 +-
arch/arm/mach-omap2/clkt_iclk.c | 68 ---------------------------------------
arch/arm/mach-omap2/clock.h | 11 -------
drivers/clk/ti/Makefile | 2 +-
drivers/clk/ti/clkt_iclk.c | 66 +++++++++++++++++++++++++++++++++++++
drivers/clk/ti/clock.h | 2 ++
include/linux/clk/ti.h | 10 ++++--
7 files changed, 78 insertions(+), 84 deletions(-)
delete mode 100644 arch/arm/mach-omap2/clkt_iclk.c
create mode 100644 drivers/clk/ti/clkt_iclk.c
diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
index 5bcd282..a2f5156 100644
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -185,13 +185,12 @@ obj-$(CONFIG_SOC_DRA7XX) += clockdomains7xx_data.o
obj-$(CONFIG_ARCH_OMAP2) += $(clock-common) clock2xxx.o
obj-$(CONFIG_ARCH_OMAP2) += clkt2xxx_dpllcore.o
obj-$(CONFIG_ARCH_OMAP2) += clkt2xxx_virt_prcm_set.o
-obj-$(CONFIG_ARCH_OMAP2) += clkt2xxx_dpll.o clkt_iclk.o
+obj-$(CONFIG_ARCH_OMAP2) += clkt2xxx_dpll.o
obj-$(CONFIG_SOC_OMAP2430) += clock2430.o
obj-$(CONFIG_ARCH_OMAP3) += $(clock-common) clock3xxx.o
obj-$(CONFIG_ARCH_OMAP3) += clock34xx.o clkt34xx_dpll3m2.o
obj-$(CONFIG_ARCH_OMAP3) += clock3517.o clock36xx.o
obj-$(CONFIG_ARCH_OMAP3) += dpll3xxx.o
-obj-$(CONFIG_ARCH_OMAP3) += clkt_iclk.o
obj-$(CONFIG_ARCH_OMAP4) += $(clock-common)
obj-$(CONFIG_ARCH_OMAP4) += dpll3xxx.o
obj-$(CONFIG_SOC_AM33XX) += $(clock-common) dpll3xxx.o
diff --git a/arch/arm/mach-omap2/clkt_iclk.c b/arch/arm/mach-omap2/clkt_iclk.c
deleted file mode 100644
index 55eb579..0000000
--- a/arch/arm/mach-omap2/clkt_iclk.c
+++ /dev/null
@@ -1,68 +0,0 @@
-/*
- * OMAP2/3 interface clock control
- *
- * Copyright (C) 2011 Nokia Corporation
- * Paul Walmsley
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#undef DEBUG
-
-#include <linux/kernel.h>
-#include <linux/clk-provider.h>
-#include <linux/io.h>
-
-#include "clock.h"
-
-/* Register offsets */
-#define CM_AUTOIDLE 0x30
-#define CM_ICLKEN 0x10
-
-/* Private functions */
-
-/* XXX */
-void omap2_clkt_iclk_allow_idle(struct clk_hw_omap *clk)
-{
- u32 v;
- void __iomem *r;
-
- r = (__force void __iomem *)
- ((__force u32)clk->enable_reg ^ (CM_AUTOIDLE ^ CM_ICLKEN));
-
- v = omap2_clk_readl(clk, r);
- v |= (1 << clk->enable_bit);
- omap2_clk_writel(v, clk, r);
-}
-
-/* XXX */
-void omap2_clkt_iclk_deny_idle(struct clk_hw_omap *clk)
-{
- u32 v;
- void __iomem *r;
-
- r = (__force void __iomem *)
- ((__force u32)clk->enable_reg ^ (CM_AUTOIDLE ^ CM_ICLKEN));
-
- v = omap2_clk_readl(clk, r);
- v &= ~(1 << clk->enable_bit);
- omap2_clk_writel(v, clk, r);
-}
-
-/* Public data */
-
-const struct clk_hw_omap_ops clkhwops_iclk = {
- .allow_idle = omap2_clkt_iclk_allow_idle,
- .deny_idle = omap2_clkt_iclk_deny_idle,
-};
-
-const struct clk_hw_omap_ops clkhwops_iclk_wait = {
- .allow_idle = omap2_clkt_iclk_allow_idle,
- .deny_idle = omap2_clkt_iclk_deny_idle,
- .find_idlest = omap2_clk_dflt_find_idlest,
- .find_companion = omap2_clk_dflt_find_companion,
-};
-
-
-
diff --git a/arch/arm/mach-omap2/clock.h b/arch/arm/mach-omap2/clock.h
index d7ed244..ca8c42c 100644
--- a/arch/arm/mach-omap2/clock.h
+++ b/arch/arm/mach-omap2/clock.h
@@ -198,16 +198,6 @@ int omap2_clksel_set_rate(struct clk_hw *hw, unsigned long rate,
unsigned long parent_rate);
int omap2_clksel_set_parent(struct clk_hw *hw, u8 field_val);
-/* clkt_iclk.c public functions */
-extern void omap2_clkt_iclk_allow_idle(struct clk_hw_omap *clk);
-extern void omap2_clkt_iclk_deny_idle(struct clk_hw_omap *clk);
-
-void omap2_clk_dflt_find_companion(struct clk_hw_omap *clk,
- void __iomem **other_reg,
- u8 *other_bit);
-void omap2_clk_dflt_find_idlest(struct clk_hw_omap *clk,
- void __iomem **idlest_reg,
- u8 *idlest_bit, u8 *idlest_val);
int omap2_clk_enable_autoidle_all(void);
int omap2_clk_allow_idle(struct clk *clk);
int omap2_clk_deny_idle(struct clk *clk);
@@ -231,7 +221,6 @@ extern const struct clksel_rate gpt_sys_rates[];
extern const struct clksel_rate gfx_l3_rates[];
extern const struct clksel_rate dsp_ick_rates[];
-extern const struct clk_hw_omap_ops clkhwops_iclk_wait;
extern const struct clk_hw_omap_ops clkhwops_wait;
extern const struct clk_hw_omap_ops clkhwops_omap3430es2_ssi_wait;
extern const struct clk_hw_omap_ops clkhwops_omap3430es2_dss_usbhost_wait;
diff --git a/drivers/clk/ti/Makefile b/drivers/clk/ti/Makefile
index c3ec301..23cd726 100644
--- a/drivers/clk/ti/Makefile
+++ b/drivers/clk/ti/Makefile
@@ -1,7 +1,7 @@
obj-y += clk.o autoidle.o clockdomain.o
clk-common = dpll.o composite.o divider.o gate.o \
fixed-factor.o mux.o apll.o \
- clkt_dpll.o
+ clkt_dpll.o clkt_iclk.o
obj-$(CONFIG_SOC_AM33XX) += $(clk-common) clk-33xx.o
obj-$(CONFIG_SOC_TI81XX) += $(clk-common) fapll.o clk-816x.o
obj-$(CONFIG_ARCH_OMAP2) += $(clk-common) interface.o clk-2xxx.o
diff --git a/drivers/clk/ti/clkt_iclk.c b/drivers/clk/ti/clkt_iclk.c
new file mode 100644
index 0000000..a03919d
--- /dev/null
+++ b/drivers/clk/ti/clkt_iclk.c
@@ -0,0 +1,66 @@
+/*
+ * OMAP2/3 interface clock control
+ *
+ * Copyright (C) 2011 Nokia Corporation
+ * Paul Walmsley
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#undef DEBUG
+
+#include <linux/kernel.h>
+#include <linux/clk-provider.h>
+#include <linux/io.h>
+#include <linux/clk/ti.h>
+
+#include "clock.h"
+
+/* Register offsets */
+#define CM_AUTOIDLE 0x30
+#define CM_ICLKEN 0x10
+
+/* Private functions */
+
+/* XXX */
+void omap2_clkt_iclk_allow_idle(struct clk_hw_omap *clk)
+{
+ u32 v;
+ void __iomem *r;
+
+ r = (__force void __iomem *)
+ ((__force u32)clk->enable_reg ^ (CM_AUTOIDLE ^ CM_ICLKEN));
+
+ v = ti_clk_ll_ops->clk_readl(r);
+ v |= (1 << clk->enable_bit);
+ ti_clk_ll_ops->clk_writel(v, r);
+}
+
+/* XXX */
+void omap2_clkt_iclk_deny_idle(struct clk_hw_omap *clk)
+{
+ u32 v;
+ void __iomem *r;
+
+ r = (__force void __iomem *)
+ ((__force u32)clk->enable_reg ^ (CM_AUTOIDLE ^ CM_ICLKEN));
+
+ v = ti_clk_ll_ops->clk_readl(r);
+ v &= ~(1 << clk->enable_bit);
+ ti_clk_ll_ops->clk_writel(v, r);
+}
+
+/* Public data */
+
+const struct clk_hw_omap_ops clkhwops_iclk = {
+ .allow_idle = omap2_clkt_iclk_allow_idle,
+ .deny_idle = omap2_clkt_iclk_deny_idle,
+};
+
+const struct clk_hw_omap_ops clkhwops_iclk_wait = {
+ .allow_idle = omap2_clkt_iclk_allow_idle,
+ .deny_idle = omap2_clkt_iclk_deny_idle,
+ .find_idlest = omap2_clk_dflt_find_idlest,
+ .find_companion = omap2_clk_dflt_find_companion,
+};
diff --git a/drivers/clk/ti/clock.h b/drivers/clk/ti/clock.h
index c75d4b4..a7256a9 100644
--- a/drivers/clk/ti/clock.h
+++ b/drivers/clk/ti/clock.h
@@ -170,6 +170,8 @@ struct clk *ti_clk_register_clk(struct ti_clk *setup);
int ti_clk_register_legacy_clks(struct ti_clk_alias *clks);
extern const struct clk_hw_omap_ops clkhwops_omap4_dpllmx;
+extern const struct clk_hw_omap_ops clkhwops_iclk;
+extern const struct clk_hw_omap_ops clkhwops_iclk_wait;
u8 omap2_init_dpll_parent(struct clk_hw *hw);
diff --git a/include/linux/clk/ti.h b/include/linux/clk/ti.h
index 89deddf..63f2945 100644
--- a/include/linux/clk/ti.h
+++ b/include/linux/clk/ti.h
@@ -296,6 +296,14 @@ int omap3_dpll4_set_rate_and_parent(struct clk_hw *hw, unsigned long rate,
int omap2_dflt_clk_enable(struct clk_hw *hw);
void omap2_dflt_clk_disable(struct clk_hw *hw);
int omap2_dflt_clk_is_enabled(struct clk_hw *hw);
+void omap2_clkt_iclk_allow_idle(struct clk_hw_omap *clk);
+void omap2_clkt_iclk_deny_idle(struct clk_hw_omap *clk);
+void omap2_clk_dflt_find_companion(struct clk_hw_omap *clk,
+ void __iomem **other_reg,
+ u8 *other_bit);
+void omap2_clk_dflt_find_idlest(struct clk_hw_omap *clk,
+ void __iomem **idlest_reg,
+ u8 *idlest_bit, u8 *idlest_val);
void omap3_clk_lock_dpll5(void);
unsigned long omap2_dpllcore_recalc(struct clk_hw *hw,
unsigned long parent_rate);
@@ -358,8 +366,6 @@ extern const struct clk_hw_omap_ops clkhwops_wait;
extern const struct clk_hw_omap_ops clkhwops_omap3430es2_dss_usbhost_wait;
extern const struct clk_hw_omap_ops clkhwops_am35xx_ipss_module_wait;
extern const struct clk_hw_omap_ops clkhwops_am35xx_ipss_wait;
-extern const struct clk_hw_omap_ops clkhwops_iclk;
-extern const struct clk_hw_omap_ops clkhwops_iclk_wait;
extern const struct clk_hw_omap_ops clkhwops_omap3430es2_iclk_ssi_wait;
extern const struct clk_hw_omap_ops clkhwops_omap3430es2_iclk_dss_usbhost_wait;
extern const struct clk_hw_omap_ops clkhwops_omap3430es2_iclk_hsotgusb_wait;
--
1.7.9.5
^ permalink raw reply related [flat|nested] 120+ messages in thread
* [PATCHv2 04/27] clk: ti: move interface clock implementation under drivers/clk
@ 2015-05-11 8:54 ` Tero Kristo
0 siblings, 0 replies; 120+ messages in thread
From: Tero Kristo @ 2015-05-11 8:54 UTC (permalink / raw)
To: linux-arm-kernel
With the legacy clock support gone, the OMAP interface clock implementation
can be moved under the clock driver. Some temporary header file tweaks are
also needed to make this change work properly.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
---
arch/arm/mach-omap2/Makefile | 3 +-
arch/arm/mach-omap2/clkt_iclk.c | 68 ---------------------------------------
arch/arm/mach-omap2/clock.h | 11 -------
drivers/clk/ti/Makefile | 2 +-
drivers/clk/ti/clkt_iclk.c | 66 +++++++++++++++++++++++++++++++++++++
drivers/clk/ti/clock.h | 2 ++
include/linux/clk/ti.h | 10 ++++--
7 files changed, 78 insertions(+), 84 deletions(-)
delete mode 100644 arch/arm/mach-omap2/clkt_iclk.c
create mode 100644 drivers/clk/ti/clkt_iclk.c
diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
index 5bcd282..a2f5156 100644
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -185,13 +185,12 @@ obj-$(CONFIG_SOC_DRA7XX) += clockdomains7xx_data.o
obj-$(CONFIG_ARCH_OMAP2) += $(clock-common) clock2xxx.o
obj-$(CONFIG_ARCH_OMAP2) += clkt2xxx_dpllcore.o
obj-$(CONFIG_ARCH_OMAP2) += clkt2xxx_virt_prcm_set.o
-obj-$(CONFIG_ARCH_OMAP2) += clkt2xxx_dpll.o clkt_iclk.o
+obj-$(CONFIG_ARCH_OMAP2) += clkt2xxx_dpll.o
obj-$(CONFIG_SOC_OMAP2430) += clock2430.o
obj-$(CONFIG_ARCH_OMAP3) += $(clock-common) clock3xxx.o
obj-$(CONFIG_ARCH_OMAP3) += clock34xx.o clkt34xx_dpll3m2.o
obj-$(CONFIG_ARCH_OMAP3) += clock3517.o clock36xx.o
obj-$(CONFIG_ARCH_OMAP3) += dpll3xxx.o
-obj-$(CONFIG_ARCH_OMAP3) += clkt_iclk.o
obj-$(CONFIG_ARCH_OMAP4) += $(clock-common)
obj-$(CONFIG_ARCH_OMAP4) += dpll3xxx.o
obj-$(CONFIG_SOC_AM33XX) += $(clock-common) dpll3xxx.o
diff --git a/arch/arm/mach-omap2/clkt_iclk.c b/arch/arm/mach-omap2/clkt_iclk.c
deleted file mode 100644
index 55eb579..0000000
--- a/arch/arm/mach-omap2/clkt_iclk.c
+++ /dev/null
@@ -1,68 +0,0 @@
-/*
- * OMAP2/3 interface clock control
- *
- * Copyright (C) 2011 Nokia Corporation
- * Paul Walmsley
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#undef DEBUG
-
-#include <linux/kernel.h>
-#include <linux/clk-provider.h>
-#include <linux/io.h>
-
-#include "clock.h"
-
-/* Register offsets */
-#define CM_AUTOIDLE 0x30
-#define CM_ICLKEN 0x10
-
-/* Private functions */
-
-/* XXX */
-void omap2_clkt_iclk_allow_idle(struct clk_hw_omap *clk)
-{
- u32 v;
- void __iomem *r;
-
- r = (__force void __iomem *)
- ((__force u32)clk->enable_reg ^ (CM_AUTOIDLE ^ CM_ICLKEN));
-
- v = omap2_clk_readl(clk, r);
- v |= (1 << clk->enable_bit);
- omap2_clk_writel(v, clk, r);
-}
-
-/* XXX */
-void omap2_clkt_iclk_deny_idle(struct clk_hw_omap *clk)
-{
- u32 v;
- void __iomem *r;
-
- r = (__force void __iomem *)
- ((__force u32)clk->enable_reg ^ (CM_AUTOIDLE ^ CM_ICLKEN));
-
- v = omap2_clk_readl(clk, r);
- v &= ~(1 << clk->enable_bit);
- omap2_clk_writel(v, clk, r);
-}
-
-/* Public data */
-
-const struct clk_hw_omap_ops clkhwops_iclk = {
- .allow_idle = omap2_clkt_iclk_allow_idle,
- .deny_idle = omap2_clkt_iclk_deny_idle,
-};
-
-const struct clk_hw_omap_ops clkhwops_iclk_wait = {
- .allow_idle = omap2_clkt_iclk_allow_idle,
- .deny_idle = omap2_clkt_iclk_deny_idle,
- .find_idlest = omap2_clk_dflt_find_idlest,
- .find_companion = omap2_clk_dflt_find_companion,
-};
-
-
-
diff --git a/arch/arm/mach-omap2/clock.h b/arch/arm/mach-omap2/clock.h
index d7ed244..ca8c42c 100644
--- a/arch/arm/mach-omap2/clock.h
+++ b/arch/arm/mach-omap2/clock.h
@@ -198,16 +198,6 @@ int omap2_clksel_set_rate(struct clk_hw *hw, unsigned long rate,
unsigned long parent_rate);
int omap2_clksel_set_parent(struct clk_hw *hw, u8 field_val);
-/* clkt_iclk.c public functions */
-extern void omap2_clkt_iclk_allow_idle(struct clk_hw_omap *clk);
-extern void omap2_clkt_iclk_deny_idle(struct clk_hw_omap *clk);
-
-void omap2_clk_dflt_find_companion(struct clk_hw_omap *clk,
- void __iomem **other_reg,
- u8 *other_bit);
-void omap2_clk_dflt_find_idlest(struct clk_hw_omap *clk,
- void __iomem **idlest_reg,
- u8 *idlest_bit, u8 *idlest_val);
int omap2_clk_enable_autoidle_all(void);
int omap2_clk_allow_idle(struct clk *clk);
int omap2_clk_deny_idle(struct clk *clk);
@@ -231,7 +221,6 @@ extern const struct clksel_rate gpt_sys_rates[];
extern const struct clksel_rate gfx_l3_rates[];
extern const struct clksel_rate dsp_ick_rates[];
-extern const struct clk_hw_omap_ops clkhwops_iclk_wait;
extern const struct clk_hw_omap_ops clkhwops_wait;
extern const struct clk_hw_omap_ops clkhwops_omap3430es2_ssi_wait;
extern const struct clk_hw_omap_ops clkhwops_omap3430es2_dss_usbhost_wait;
diff --git a/drivers/clk/ti/Makefile b/drivers/clk/ti/Makefile
index c3ec301..23cd726 100644
--- a/drivers/clk/ti/Makefile
+++ b/drivers/clk/ti/Makefile
@@ -1,7 +1,7 @@
obj-y += clk.o autoidle.o clockdomain.o
clk-common = dpll.o composite.o divider.o gate.o \
fixed-factor.o mux.o apll.o \
- clkt_dpll.o
+ clkt_dpll.o clkt_iclk.o
obj-$(CONFIG_SOC_AM33XX) += $(clk-common) clk-33xx.o
obj-$(CONFIG_SOC_TI81XX) += $(clk-common) fapll.o clk-816x.o
obj-$(CONFIG_ARCH_OMAP2) += $(clk-common) interface.o clk-2xxx.o
diff --git a/drivers/clk/ti/clkt_iclk.c b/drivers/clk/ti/clkt_iclk.c
new file mode 100644
index 0000000..a03919d
--- /dev/null
+++ b/drivers/clk/ti/clkt_iclk.c
@@ -0,0 +1,66 @@
+/*
+ * OMAP2/3 interface clock control
+ *
+ * Copyright (C) 2011 Nokia Corporation
+ * Paul Walmsley
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#undef DEBUG
+
+#include <linux/kernel.h>
+#include <linux/clk-provider.h>
+#include <linux/io.h>
+#include <linux/clk/ti.h>
+
+#include "clock.h"
+
+/* Register offsets */
+#define CM_AUTOIDLE 0x30
+#define CM_ICLKEN 0x10
+
+/* Private functions */
+
+/* XXX */
+void omap2_clkt_iclk_allow_idle(struct clk_hw_omap *clk)
+{
+ u32 v;
+ void __iomem *r;
+
+ r = (__force void __iomem *)
+ ((__force u32)clk->enable_reg ^ (CM_AUTOIDLE ^ CM_ICLKEN));
+
+ v = ti_clk_ll_ops->clk_readl(r);
+ v |= (1 << clk->enable_bit);
+ ti_clk_ll_ops->clk_writel(v, r);
+}
+
+/* XXX */
+void omap2_clkt_iclk_deny_idle(struct clk_hw_omap *clk)
+{
+ u32 v;
+ void __iomem *r;
+
+ r = (__force void __iomem *)
+ ((__force u32)clk->enable_reg ^ (CM_AUTOIDLE ^ CM_ICLKEN));
+
+ v = ti_clk_ll_ops->clk_readl(r);
+ v &= ~(1 << clk->enable_bit);
+ ti_clk_ll_ops->clk_writel(v, r);
+}
+
+/* Public data */
+
+const struct clk_hw_omap_ops clkhwops_iclk = {
+ .allow_idle = omap2_clkt_iclk_allow_idle,
+ .deny_idle = omap2_clkt_iclk_deny_idle,
+};
+
+const struct clk_hw_omap_ops clkhwops_iclk_wait = {
+ .allow_idle = omap2_clkt_iclk_allow_idle,
+ .deny_idle = omap2_clkt_iclk_deny_idle,
+ .find_idlest = omap2_clk_dflt_find_idlest,
+ .find_companion = omap2_clk_dflt_find_companion,
+};
diff --git a/drivers/clk/ti/clock.h b/drivers/clk/ti/clock.h
index c75d4b4..a7256a9 100644
--- a/drivers/clk/ti/clock.h
+++ b/drivers/clk/ti/clock.h
@@ -170,6 +170,8 @@ struct clk *ti_clk_register_clk(struct ti_clk *setup);
int ti_clk_register_legacy_clks(struct ti_clk_alias *clks);
extern const struct clk_hw_omap_ops clkhwops_omap4_dpllmx;
+extern const struct clk_hw_omap_ops clkhwops_iclk;
+extern const struct clk_hw_omap_ops clkhwops_iclk_wait;
u8 omap2_init_dpll_parent(struct clk_hw *hw);
diff --git a/include/linux/clk/ti.h b/include/linux/clk/ti.h
index 89deddf..63f2945 100644
--- a/include/linux/clk/ti.h
+++ b/include/linux/clk/ti.h
@@ -296,6 +296,14 @@ int omap3_dpll4_set_rate_and_parent(struct clk_hw *hw, unsigned long rate,
int omap2_dflt_clk_enable(struct clk_hw *hw);
void omap2_dflt_clk_disable(struct clk_hw *hw);
int omap2_dflt_clk_is_enabled(struct clk_hw *hw);
+void omap2_clkt_iclk_allow_idle(struct clk_hw_omap *clk);
+void omap2_clkt_iclk_deny_idle(struct clk_hw_omap *clk);
+void omap2_clk_dflt_find_companion(struct clk_hw_omap *clk,
+ void __iomem **other_reg,
+ u8 *other_bit);
+void omap2_clk_dflt_find_idlest(struct clk_hw_omap *clk,
+ void __iomem **idlest_reg,
+ u8 *idlest_bit, u8 *idlest_val);
void omap3_clk_lock_dpll5(void);
unsigned long omap2_dpllcore_recalc(struct clk_hw *hw,
unsigned long parent_rate);
@@ -358,8 +366,6 @@ extern const struct clk_hw_omap_ops clkhwops_wait;
extern const struct clk_hw_omap_ops clkhwops_omap3430es2_dss_usbhost_wait;
extern const struct clk_hw_omap_ops clkhwops_am35xx_ipss_module_wait;
extern const struct clk_hw_omap_ops clkhwops_am35xx_ipss_wait;
-extern const struct clk_hw_omap_ops clkhwops_iclk;
-extern const struct clk_hw_omap_ops clkhwops_iclk_wait;
extern const struct clk_hw_omap_ops clkhwops_omap3430es2_iclk_ssi_wait;
extern const struct clk_hw_omap_ops clkhwops_omap3430es2_iclk_dss_usbhost_wait;
extern const struct clk_hw_omap_ops clkhwops_omap3430es2_iclk_hsotgusb_wait;
--
1.7.9.5
^ permalink raw reply related [flat|nested] 120+ messages in thread
* [PATCHv2 05/27] ARM: OMAP3: dpll3-m2: get rid of obsolete clksel access
2015-05-11 8:54 ` Tero Kristo
(?)
@ 2015-05-11 8:54 ` Tero Kristo
-1 siblings, 0 replies; 120+ messages in thread
From: Tero Kristo @ 2015-05-11 8:54 UTC (permalink / raw)
To: mturquette, tony, linux-omap, linux-clk, sboyd, paul; +Cc: linux-arm-kernel
Core DVFS support code is currently referencing clksel functionality, which
is wrong. The m2 divisor has been implemented as a divider clock for a long
time already, so replace the validrate check call with proper functionality.
Core DVFS is currently not supported in the kernel so verifying this patch
can be rather tricky, this should probably be fixed at some point.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
---
arch/arm/mach-omap2/clkt34xx_dpll3m2.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/arch/arm/mach-omap2/clkt34xx_dpll3m2.c b/arch/arm/mach-omap2/clkt34xx_dpll3m2.c
index eb69acf..825e3da 100644
--- a/arch/arm/mach-omap2/clkt34xx_dpll3m2.c
+++ b/arch/arm/mach-omap2/clkt34xx_dpll3m2.c
@@ -60,7 +60,9 @@ int omap3_core_dpll_m2_set_rate(struct clk_hw *hw, unsigned long rate,
if (!clk || !rate)
return -EINVAL;
- validrate = omap2_clksel_round_rate_div(clk, rate, &new_div);
+ new_div = DIV_ROUND_UP(parent_rate, rate);
+ validrate = parent_rate / new_div;
+
if (validrate != rate)
return -EINVAL;
--
1.7.9.5
^ permalink raw reply related [flat|nested] 120+ messages in thread
* [PATCHv2 05/27] ARM: OMAP3: dpll3-m2: get rid of obsolete clksel access
@ 2015-05-11 8:54 ` Tero Kristo
0 siblings, 0 replies; 120+ messages in thread
From: Tero Kristo @ 2015-05-11 8:54 UTC (permalink / raw)
To: mturquette, tony, linux-omap, linux-clk, sboyd, paul; +Cc: linux-arm-kernel
Core DVFS support code is currently referencing clksel functionality, which
is wrong. The m2 divisor has been implemented as a divider clock for a long
time already, so replace the validrate check call with proper functionality.
Core DVFS is currently not supported in the kernel so verifying this patch
can be rather tricky, this should probably be fixed at some point.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
---
arch/arm/mach-omap2/clkt34xx_dpll3m2.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/arch/arm/mach-omap2/clkt34xx_dpll3m2.c b/arch/arm/mach-omap2/clkt34xx_dpll3m2.c
index eb69acf..825e3da 100644
--- a/arch/arm/mach-omap2/clkt34xx_dpll3m2.c
+++ b/arch/arm/mach-omap2/clkt34xx_dpll3m2.c
@@ -60,7 +60,9 @@ int omap3_core_dpll_m2_set_rate(struct clk_hw *hw, unsigned long rate,
if (!clk || !rate)
return -EINVAL;
- validrate = omap2_clksel_round_rate_div(clk, rate, &new_div);
+ new_div = DIV_ROUND_UP(parent_rate, rate);
+ validrate = parent_rate / new_div;
+
if (validrate != rate)
return -EINVAL;
--
1.7.9.5
^ permalink raw reply related [flat|nested] 120+ messages in thread
* [PATCHv2 05/27] ARM: OMAP3: dpll3-m2: get rid of obsolete clksel access
@ 2015-05-11 8:54 ` Tero Kristo
0 siblings, 0 replies; 120+ messages in thread
From: Tero Kristo @ 2015-05-11 8:54 UTC (permalink / raw)
To: linux-arm-kernel
Core DVFS support code is currently referencing clksel functionality, which
is wrong. The m2 divisor has been implemented as a divider clock for a long
time already, so replace the validrate check call with proper functionality.
Core DVFS is currently not supported in the kernel so verifying this patch
can be rather tricky, this should probably be fixed at some point.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
---
arch/arm/mach-omap2/clkt34xx_dpll3m2.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/arch/arm/mach-omap2/clkt34xx_dpll3m2.c b/arch/arm/mach-omap2/clkt34xx_dpll3m2.c
index eb69acf..825e3da 100644
--- a/arch/arm/mach-omap2/clkt34xx_dpll3m2.c
+++ b/arch/arm/mach-omap2/clkt34xx_dpll3m2.c
@@ -60,7 +60,9 @@ int omap3_core_dpll_m2_set_rate(struct clk_hw *hw, unsigned long rate,
if (!clk || !rate)
return -EINVAL;
- validrate = omap2_clksel_round_rate_div(clk, rate, &new_div);
+ new_div = DIV_ROUND_UP(parent_rate, rate);
+ validrate = parent_rate / new_div;
+
if (validrate != rate)
return -EINVAL;
--
1.7.9.5
^ permalink raw reply related [flat|nested] 120+ messages in thread
* [PATCHv2 06/27] ARM: OMAP2+: clk: remove obsolete clksel support code
2015-05-11 8:54 ` Tero Kristo
(?)
@ 2015-05-11 8:54 ` Tero Kristo
-1 siblings, 0 replies; 120+ messages in thread
From: Tero Kristo @ 2015-05-11 8:54 UTC (permalink / raw)
To: mturquette, tony, linux-omap, linux-clk, sboyd, paul; +Cc: linux-arm-kernel
The clksel clock type is no longer used for anything, it is rather
replaced with common clock divider code. Thus, remove the dead code
from kernel.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
---
arch/arm/mach-omap2/Makefile | 3 +-
arch/arm/mach-omap2/clkt_clksel.c | 466 -------------------------------------
arch/arm/mach-omap2/clock.h | 12 -
3 files changed, 1 insertion(+), 480 deletions(-)
delete mode 100644 arch/arm/mach-omap2/clkt_clksel.c
diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
index a2f5156..d03bc21 100644
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -12,8 +12,7 @@ obj-y := id.o io.o control.o mux.o devices.o fb.o serial.o timer.o pm.o \
hwmod-common = omap_hwmod.o omap_hwmod_reset.o \
omap_hwmod_common_data.o
-clock-common = clock.o clock_common_data.o \
- clkt_clksel.o
+clock-common = clock.o clock_common_data.o
secure-common = omap-smc.o omap-secure.o
obj-$(CONFIG_ARCH_OMAP2) += $(omap-2-3-common) $(hwmod-common)
diff --git a/arch/arm/mach-omap2/clkt_clksel.c b/arch/arm/mach-omap2/clkt_clksel.c
deleted file mode 100644
index 7ee2610..0000000
--- a/arch/arm/mach-omap2/clkt_clksel.c
+++ /dev/null
@@ -1,466 +0,0 @@
-/*
- * clkt_clksel.c - OMAP2/3/4 clksel clock functions
- *
- * Copyright (C) 2005-2008 Texas Instruments, Inc.
- * Copyright (C) 2004-2010 Nokia Corporation
- *
- * Contacts:
- * Richard Woodruff <r-woodruff2@ti.com>
- * Paul Walmsley
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- *
- * clksel clocks are clocks that do not have a fixed parent, or that
- * can divide their parent's rate, or possibly both at the same time, based
- * on the contents of a hardware register bitfield.
- *
- * All of the various mux and divider settings can be encoded into
- * struct clksel* data structures, and then these can be autogenerated
- * from some hardware database for each new chip generation. This
- * should avoid the need to write, review, and validate a lot of new
- * clock code for each new chip, since it can be exported from the SoC
- * design flow. This is now done on OMAP4.
- *
- * The fusion of mux and divider clocks is a software creation. In
- * hardware reality, the multiplexer (parent selection) and the
- * divider exist separately. XXX At some point these clksel clocks
- * should be split into "divider" clocks and "mux" clocks to better
- * match the hardware.
- *
- * (The name "clksel" comes from the name of the corresponding
- * register field in the OMAP2/3 family of SoCs.)
- *
- * XXX Currently these clocks are only used in the OMAP2/3/4 code, but
- * many of the OMAP1 clocks should be convertible to use this
- * mechanism.
- */
-#undef DEBUG
-
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/clk-provider.h>
-#include <linux/io.h>
-#include <linux/bug.h>
-
-#include "clock.h"
-
-/* Private functions */
-
-/**
- * _get_clksel_by_parent() - return clksel struct for a given clk & parent
- * @clk: OMAP struct clk ptr to inspect
- * @src_clk: OMAP struct clk ptr of the parent clk to search for
- *
- * Scan the struct clksel array associated with the clock to find
- * the element associated with the supplied parent clock address.
- * Returns a pointer to the struct clksel on success or NULL on error.
- */
-static const struct clksel *_get_clksel_by_parent(struct clk_hw_omap *clk,
- struct clk *src_clk)
-{
- const struct clksel *clks;
-
- if (!src_clk)
- return NULL;
-
- for (clks = clk->clksel; clks->parent; clks++)
- if (clks->parent == src_clk)
- break; /* Found the requested parent */
-
- if (!clks->parent) {
- /* This indicates a data problem */
- WARN(1, "clock: %s: could not find parent clock %s in clksel array\n",
- __clk_get_name(clk->hw.clk), __clk_get_name(src_clk));
- return NULL;
- }
-
- return clks;
-}
-
-/**
- * _write_clksel_reg() - program a clock's clksel register in hardware
- * @clk: struct clk * to program
- * @v: clksel bitfield value to program (with LSB at bit 0)
- *
- * Shift the clksel register bitfield value @v to its appropriate
- * location in the clksel register and write it in. This function
- * will ensure that the write to the clksel_reg reaches its
- * destination before returning -- important since PRM and CM register
- * accesses can be quite slow compared to ARM cycles -- but does not
- * take into account any time the hardware might take to switch the
- * clock source.
- */
-static void _write_clksel_reg(struct clk_hw_omap *clk, u32 field_val)
-{
- u32 v;
-
- v = omap2_clk_readl(clk, clk->clksel_reg);
- v &= ~clk->clksel_mask;
- v |= field_val << __ffs(clk->clksel_mask);
- omap2_clk_writel(v, clk, clk->clksel_reg);
-
- v = omap2_clk_readl(clk, clk->clksel_reg); /* OCP barrier */
-}
-
-/**
- * _clksel_to_divisor() - turn clksel field value into integer divider
- * @clk: OMAP struct clk to use
- * @field_val: register field value to find
- *
- * Given a struct clk of a rate-selectable clksel clock, and a register field
- * value to search for, find the corresponding clock divisor. The register
- * field value should be pre-masked and shifted down so the LSB is at bit 0
- * before calling. Returns 0 on error or returns the actual integer divisor
- * upon success.
- */
-static u32 _clksel_to_divisor(struct clk_hw_omap *clk, u32 field_val)
-{
- const struct clksel *clks;
- const struct clksel_rate *clkr;
- struct clk *parent;
-
- parent = __clk_get_parent(clk->hw.clk);
-
- clks = _get_clksel_by_parent(clk, parent);
- if (!clks)
- return 0;
-
- for (clkr = clks->rates; clkr->div; clkr++) {
- if (!(clkr->flags & cpu_mask))
- continue;
-
- if (clkr->val == field_val)
- break;
- }
-
- if (!clkr->div) {
- /* This indicates a data error */
- WARN(1, "clock: %s: could not find fieldval %d for parent %s\n",
- __clk_get_name(clk->hw.clk), field_val,
- __clk_get_name(parent));
- return 0;
- }
-
- return clkr->div;
-}
-
-/**
- * _divisor_to_clksel() - turn clksel integer divisor into a field value
- * @clk: OMAP struct clk to use
- * @div: integer divisor to search for
- *
- * Given a struct clk of a rate-selectable clksel clock, and a clock
- * divisor, find the corresponding register field value. Returns the
- * register field value _before_ left-shifting (i.e., LSB is at bit
- * 0); or returns 0xFFFFFFFF (~0) upon error.
- */
-static u32 _divisor_to_clksel(struct clk_hw_omap *clk, u32 div)
-{
- const struct clksel *clks;
- const struct clksel_rate *clkr;
- struct clk *parent;
-
- /* should never happen */
- WARN_ON(div == 0);
-
- parent = __clk_get_parent(clk->hw.clk);
- clks = _get_clksel_by_parent(clk, parent);
- if (!clks)
- return ~0;
-
- for (clkr = clks->rates; clkr->div; clkr++) {
- if (!(clkr->flags & cpu_mask))
- continue;
-
- if (clkr->div == div)
- break;
- }
-
- if (!clkr->div) {
- pr_err("clock: %s: could not find divisor %d for parent %s\n",
- __clk_get_name(clk->hw.clk), div,
- __clk_get_name(parent));
- return ~0;
- }
-
- return clkr->val;
-}
-
-/**
- * _read_divisor() - get current divisor applied to parent clock (from hdwr)
- * @clk: OMAP struct clk to use.
- *
- * Read the current divisor register value for @clk that is programmed
- * into the hardware, convert it into the actual divisor value, and
- * return it; or return 0 on error.
- */
-static u32 _read_divisor(struct clk_hw_omap *clk)
-{
- u32 v;
-
- if (!clk->clksel || !clk->clksel_mask)
- return 0;
-
- v = omap2_clk_readl(clk, clk->clksel_reg);
- v &= clk->clksel_mask;
- v >>= __ffs(clk->clksel_mask);
-
- return _clksel_to_divisor(clk, v);
-}
-
-/* Public functions */
-
-/**
- * omap2_clksel_round_rate_div() - find divisor for the given clock and rate
- * @clk: OMAP struct clk to use
- * @target_rate: desired clock rate
- * @new_div: ptr to where we should store the divisor
- *
- * Finds 'best' divider value in an array based on the source and target
- * rates. The divider array must be sorted with smallest divider first.
- * This function is also used by the DPLL3 M2 divider code.
- *
- * Returns the rounded clock rate or returns 0xffffffff on error.
- */
-u32 omap2_clksel_round_rate_div(struct clk_hw_omap *clk,
- unsigned long target_rate,
- u32 *new_div)
-{
- unsigned long test_rate;
- const struct clksel *clks;
- const struct clksel_rate *clkr;
- u32 last_div = 0;
- struct clk *parent;
- unsigned long parent_rate;
- const char *clk_name;
-
- parent = __clk_get_parent(clk->hw.clk);
- clk_name = __clk_get_name(clk->hw.clk);
- parent_rate = __clk_get_rate(parent);
-
- if (!clk->clksel || !clk->clksel_mask)
- return ~0;
-
- pr_debug("clock: clksel_round_rate_div: %s target_rate %ld\n",
- clk_name, target_rate);
-
- *new_div = 1;
-
- clks = _get_clksel_by_parent(clk, parent);
- if (!clks)
- return ~0;
-
- for (clkr = clks->rates; clkr->div; clkr++) {
- if (!(clkr->flags & cpu_mask))
- continue;
-
- /* Sanity check */
- if (clkr->div <= last_div)
- pr_err("clock: %s: clksel_rate table not sorted\n",
- clk_name);
-
- last_div = clkr->div;
-
- test_rate = parent_rate / clkr->div;
-
- if (test_rate <= target_rate)
- break; /* found it */
- }
-
- if (!clkr->div) {
- pr_err("clock: %s: could not find divisor for target rate %ld for parent %s\n",
- clk_name, target_rate, __clk_get_name(parent));
- return ~0;
- }
-
- *new_div = clkr->div;
-
- pr_debug("clock: new_div = %d, new_rate = %ld\n", *new_div,
- (parent_rate / clkr->div));
-
- return parent_rate / clkr->div;
-}
-
-/*
- * Clocktype interface functions to the OMAP clock code
- * (i.e., those used in struct clk field function pointers, etc.)
- */
-
-/**
- * omap2_clksel_find_parent_index() - return the array index of the current
- * hardware parent of @hw
- * @hw: struct clk_hw * to find the current hardware parent of
- *
- * Given a struct clk_hw pointer @hw to the 'hw' member of a struct
- * clk_hw_omap record representing a source-selectable hardware clock,
- * read the hardware register and determine what its parent is
- * currently set to. Intended to be called only by the common clock
- * framework struct clk_hw_ops.get_parent function pointer. Return
- * the array index of this parent clock upon success -- there is no
- * way to return an error, so if we encounter an error, just WARN()
- * and pretend that we know that we're doing.
- */
-u8 omap2_clksel_find_parent_index(struct clk_hw *hw)
-{
- struct clk_hw_omap *clk = to_clk_hw_omap(hw);
- const struct clksel *clks;
- const struct clksel_rate *clkr;
- u32 r, found = 0;
- struct clk *parent;
- const char *clk_name;
- int ret = 0, f = 0;
-
- parent = __clk_get_parent(hw->clk);
- clk_name = __clk_get_name(hw->clk);
-
- /* XXX should be able to return an error */
- WARN((!clk->clksel || !clk->clksel_mask),
- "clock: %s: attempt to call on a non-clksel clock", clk_name);
-
- r = omap2_clk_readl(clk, clk->clksel_reg) & clk->clksel_mask;
- r >>= __ffs(clk->clksel_mask);
-
- for (clks = clk->clksel; clks->parent && !found; clks++) {
- for (clkr = clks->rates; clkr->div && !found; clkr++) {
- if (!(clkr->flags & cpu_mask))
- continue;
-
- if (clkr->val == r) {
- found = 1;
- ret = f;
- }
- }
- f++;
- }
-
- /* This indicates a data error */
- WARN(!found, "clock: %s: init parent: could not find regval %0x\n",
- clk_name, r);
-
- return ret;
-}
-
-
-/**
- * omap2_clksel_recalc() - function ptr to pass via struct clk .recalc field
- * @clk: struct clk *
- *
- * This function is intended to be called only by the clock framework.
- * Each clksel clock should have its struct clk .recalc field set to this
- * function. Returns the clock's current rate, based on its parent's rate
- * and its current divisor setting in the hardware.
- */
-unsigned long omap2_clksel_recalc(struct clk_hw *hw, unsigned long parent_rate)
-{
- unsigned long rate;
- u32 div = 0;
- struct clk_hw_omap *clk = to_clk_hw_omap(hw);
-
- if (!parent_rate)
- return 0;
-
- div = _read_divisor(clk);
- if (!div)
- rate = parent_rate;
- else
- rate = parent_rate / div;
-
- pr_debug("%s: recalc'd %s's rate to %lu (div %d)\n", __func__,
- __clk_get_name(hw->clk), rate, div);
-
- return rate;
-}
-
-/**
- * omap2_clksel_round_rate() - find rounded rate for the given clock and rate
- * @clk: OMAP struct clk to use
- * @target_rate: desired clock rate
- *
- * This function is intended to be called only by the clock framework.
- * Finds best target rate based on the source clock and possible dividers.
- * rates. The divider array must be sorted with smallest divider first.
- *
- * Returns the rounded clock rate or returns 0xffffffff on error.
- */
-long omap2_clksel_round_rate(struct clk_hw *hw, unsigned long target_rate,
- unsigned long *parent_rate)
-{
- struct clk_hw_omap *clk = to_clk_hw_omap(hw);
- u32 new_div;
-
- return omap2_clksel_round_rate_div(clk, target_rate, &new_div);
-}
-
-/**
- * omap2_clksel_set_rate() - program clock rate in hardware
- * @clk: struct clk * to program rate
- * @rate: target rate to program
- *
- * This function is intended to be called only by the clock framework.
- * Program @clk's rate to @rate in the hardware. The clock can be
- * either enabled or disabled when this happens, although if the clock
- * is enabled, some downstream devices may glitch or behave
- * unpredictably when the clock rate is changed - this depends on the
- * hardware. This function does not currently check the usecount of
- * the clock, so if multiple drivers are using the clock, and the rate
- * is changed, they will all be affected without any notification.
- * Returns -EINVAL upon error, or 0 upon success.
- */
-int omap2_clksel_set_rate(struct clk_hw *hw, unsigned long rate,
- unsigned long parent_rate)
-{
- struct clk_hw_omap *clk = to_clk_hw_omap(hw);
- u32 field_val, validrate, new_div = 0;
-
- if (!clk->clksel || !clk->clksel_mask)
- return -EINVAL;
-
- validrate = omap2_clksel_round_rate_div(clk, rate, &new_div);
- if (validrate != rate)
- return -EINVAL;
-
- field_val = _divisor_to_clksel(clk, new_div);
- if (field_val == ~0)
- return -EINVAL;
-
- _write_clksel_reg(clk, field_val);
-
- pr_debug("clock: %s: set rate to %ld\n", __clk_get_name(hw->clk),
- __clk_get_rate(hw->clk));
-
- return 0;
-}
-
-/*
- * Clksel parent setting function - not passed in struct clk function
- * pointer - instead, the OMAP clock code currently assumes that any
- * parent-setting clock is a clksel clock, and calls
- * omap2_clksel_set_parent() by default
- */
-
-/**
- * omap2_clksel_set_parent() - change a clock's parent clock
- * @clk: struct clk * of the child clock
- * @new_parent: struct clk * of the new parent clock
- *
- * This function is intended to be called only by the clock framework.
- * Change the parent clock of clock @clk to @new_parent. This is
- * intended to be used while @clk is disabled. This function does not
- * currently check the usecount of the clock, so if multiple drivers
- * are using the clock, and the parent is changed, they will all be
- * affected without any notification. Returns -EINVAL upon error, or
- * 0 upon success.
- */
-int omap2_clksel_set_parent(struct clk_hw *hw, u8 field_val)
-{
- struct clk_hw_omap *clk = to_clk_hw_omap(hw);
-
- if (!clk->clksel || !clk->clksel_mask)
- return -EINVAL;
-
- _write_clksel_reg(clk, field_val);
- return 0;
-}
diff --git a/arch/arm/mach-omap2/clock.h b/arch/arm/mach-omap2/clock.h
index ca8c42c..9efff4b 100644
--- a/arch/arm/mach-omap2/clock.h
+++ b/arch/arm/mach-omap2/clock.h
@@ -186,18 +186,6 @@ void omap3_dpll_deny_idle(struct clk_hw_omap *clk);
void __init omap2_clk_disable_clkdm_control(void);
-/* clkt_clksel.c public functions */
-u32 omap2_clksel_round_rate_div(struct clk_hw_omap *clk,
- unsigned long target_rate,
- u32 *new_div);
-u8 omap2_clksel_find_parent_index(struct clk_hw *hw);
-unsigned long omap2_clksel_recalc(struct clk_hw *hw, unsigned long parent_rate);
-long omap2_clksel_round_rate(struct clk_hw *hw, unsigned long target_rate,
- unsigned long *parent_rate);
-int omap2_clksel_set_rate(struct clk_hw *hw, unsigned long rate,
- unsigned long parent_rate);
-int omap2_clksel_set_parent(struct clk_hw *hw, u8 field_val);
-
int omap2_clk_enable_autoidle_all(void);
int omap2_clk_allow_idle(struct clk *clk);
int omap2_clk_deny_idle(struct clk *clk);
--
1.7.9.5
^ permalink raw reply related [flat|nested] 120+ messages in thread
* [PATCHv2 06/27] ARM: OMAP2+: clk: remove obsolete clksel support code
@ 2015-05-11 8:54 ` Tero Kristo
0 siblings, 0 replies; 120+ messages in thread
From: Tero Kristo @ 2015-05-11 8:54 UTC (permalink / raw)
To: mturquette, tony, linux-omap, linux-clk, sboyd, paul; +Cc: linux-arm-kernel
The clksel clock type is no longer used for anything, it is rather
replaced with common clock divider code. Thus, remove the dead code
from kernel.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
---
arch/arm/mach-omap2/Makefile | 3 +-
arch/arm/mach-omap2/clkt_clksel.c | 466 -------------------------------------
arch/arm/mach-omap2/clock.h | 12 -
3 files changed, 1 insertion(+), 480 deletions(-)
delete mode 100644 arch/arm/mach-omap2/clkt_clksel.c
diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
index a2f5156..d03bc21 100644
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -12,8 +12,7 @@ obj-y := id.o io.o control.o mux.o devices.o fb.o serial.o timer.o pm.o \
hwmod-common = omap_hwmod.o omap_hwmod_reset.o \
omap_hwmod_common_data.o
-clock-common = clock.o clock_common_data.o \
- clkt_clksel.o
+clock-common = clock.o clock_common_data.o
secure-common = omap-smc.o omap-secure.o
obj-$(CONFIG_ARCH_OMAP2) += $(omap-2-3-common) $(hwmod-common)
diff --git a/arch/arm/mach-omap2/clkt_clksel.c b/arch/arm/mach-omap2/clkt_clksel.c
deleted file mode 100644
index 7ee2610..0000000
--- a/arch/arm/mach-omap2/clkt_clksel.c
+++ /dev/null
@@ -1,466 +0,0 @@
-/*
- * clkt_clksel.c - OMAP2/3/4 clksel clock functions
- *
- * Copyright (C) 2005-2008 Texas Instruments, Inc.
- * Copyright (C) 2004-2010 Nokia Corporation
- *
- * Contacts:
- * Richard Woodruff <r-woodruff2@ti.com>
- * Paul Walmsley
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- *
- * clksel clocks are clocks that do not have a fixed parent, or that
- * can divide their parent's rate, or possibly both at the same time, based
- * on the contents of a hardware register bitfield.
- *
- * All of the various mux and divider settings can be encoded into
- * struct clksel* data structures, and then these can be autogenerated
- * from some hardware database for each new chip generation. This
- * should avoid the need to write, review, and validate a lot of new
- * clock code for each new chip, since it can be exported from the SoC
- * design flow. This is now done on OMAP4.
- *
- * The fusion of mux and divider clocks is a software creation. In
- * hardware reality, the multiplexer (parent selection) and the
- * divider exist separately. XXX At some point these clksel clocks
- * should be split into "divider" clocks and "mux" clocks to better
- * match the hardware.
- *
- * (The name "clksel" comes from the name of the corresponding
- * register field in the OMAP2/3 family of SoCs.)
- *
- * XXX Currently these clocks are only used in the OMAP2/3/4 code, but
- * many of the OMAP1 clocks should be convertible to use this
- * mechanism.
- */
-#undef DEBUG
-
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/clk-provider.h>
-#include <linux/io.h>
-#include <linux/bug.h>
-
-#include "clock.h"
-
-/* Private functions */
-
-/**
- * _get_clksel_by_parent() - return clksel struct for a given clk & parent
- * @clk: OMAP struct clk ptr to inspect
- * @src_clk: OMAP struct clk ptr of the parent clk to search for
- *
- * Scan the struct clksel array associated with the clock to find
- * the element associated with the supplied parent clock address.
- * Returns a pointer to the struct clksel on success or NULL on error.
- */
-static const struct clksel *_get_clksel_by_parent(struct clk_hw_omap *clk,
- struct clk *src_clk)
-{
- const struct clksel *clks;
-
- if (!src_clk)
- return NULL;
-
- for (clks = clk->clksel; clks->parent; clks++)
- if (clks->parent == src_clk)
- break; /* Found the requested parent */
-
- if (!clks->parent) {
- /* This indicates a data problem */
- WARN(1, "clock: %s: could not find parent clock %s in clksel array\n",
- __clk_get_name(clk->hw.clk), __clk_get_name(src_clk));
- return NULL;
- }
-
- return clks;
-}
-
-/**
- * _write_clksel_reg() - program a clock's clksel register in hardware
- * @clk: struct clk * to program
- * @v: clksel bitfield value to program (with LSB at bit 0)
- *
- * Shift the clksel register bitfield value @v to its appropriate
- * location in the clksel register and write it in. This function
- * will ensure that the write to the clksel_reg reaches its
- * destination before returning -- important since PRM and CM register
- * accesses can be quite slow compared to ARM cycles -- but does not
- * take into account any time the hardware might take to switch the
- * clock source.
- */
-static void _write_clksel_reg(struct clk_hw_omap *clk, u32 field_val)
-{
- u32 v;
-
- v = omap2_clk_readl(clk, clk->clksel_reg);
- v &= ~clk->clksel_mask;
- v |= field_val << __ffs(clk->clksel_mask);
- omap2_clk_writel(v, clk, clk->clksel_reg);
-
- v = omap2_clk_readl(clk, clk->clksel_reg); /* OCP barrier */
-}
-
-/**
- * _clksel_to_divisor() - turn clksel field value into integer divider
- * @clk: OMAP struct clk to use
- * @field_val: register field value to find
- *
- * Given a struct clk of a rate-selectable clksel clock, and a register field
- * value to search for, find the corresponding clock divisor. The register
- * field value should be pre-masked and shifted down so the LSB is at bit 0
- * before calling. Returns 0 on error or returns the actual integer divisor
- * upon success.
- */
-static u32 _clksel_to_divisor(struct clk_hw_omap *clk, u32 field_val)
-{
- const struct clksel *clks;
- const struct clksel_rate *clkr;
- struct clk *parent;
-
- parent = __clk_get_parent(clk->hw.clk);
-
- clks = _get_clksel_by_parent(clk, parent);
- if (!clks)
- return 0;
-
- for (clkr = clks->rates; clkr->div; clkr++) {
- if (!(clkr->flags & cpu_mask))
- continue;
-
- if (clkr->val == field_val)
- break;
- }
-
- if (!clkr->div) {
- /* This indicates a data error */
- WARN(1, "clock: %s: could not find fieldval %d for parent %s\n",
- __clk_get_name(clk->hw.clk), field_val,
- __clk_get_name(parent));
- return 0;
- }
-
- return clkr->div;
-}
-
-/**
- * _divisor_to_clksel() - turn clksel integer divisor into a field value
- * @clk: OMAP struct clk to use
- * @div: integer divisor to search for
- *
- * Given a struct clk of a rate-selectable clksel clock, and a clock
- * divisor, find the corresponding register field value. Returns the
- * register field value _before_ left-shifting (i.e., LSB is at bit
- * 0); or returns 0xFFFFFFFF (~0) upon error.
- */
-static u32 _divisor_to_clksel(struct clk_hw_omap *clk, u32 div)
-{
- const struct clksel *clks;
- const struct clksel_rate *clkr;
- struct clk *parent;
-
- /* should never happen */
- WARN_ON(div == 0);
-
- parent = __clk_get_parent(clk->hw.clk);
- clks = _get_clksel_by_parent(clk, parent);
- if (!clks)
- return ~0;
-
- for (clkr = clks->rates; clkr->div; clkr++) {
- if (!(clkr->flags & cpu_mask))
- continue;
-
- if (clkr->div == div)
- break;
- }
-
- if (!clkr->div) {
- pr_err("clock: %s: could not find divisor %d for parent %s\n",
- __clk_get_name(clk->hw.clk), div,
- __clk_get_name(parent));
- return ~0;
- }
-
- return clkr->val;
-}
-
-/**
- * _read_divisor() - get current divisor applied to parent clock (from hdwr)
- * @clk: OMAP struct clk to use.
- *
- * Read the current divisor register value for @clk that is programmed
- * into the hardware, convert it into the actual divisor value, and
- * return it; or return 0 on error.
- */
-static u32 _read_divisor(struct clk_hw_omap *clk)
-{
- u32 v;
-
- if (!clk->clksel || !clk->clksel_mask)
- return 0;
-
- v = omap2_clk_readl(clk, clk->clksel_reg);
- v &= clk->clksel_mask;
- v >>= __ffs(clk->clksel_mask);
-
- return _clksel_to_divisor(clk, v);
-}
-
-/* Public functions */
-
-/**
- * omap2_clksel_round_rate_div() - find divisor for the given clock and rate
- * @clk: OMAP struct clk to use
- * @target_rate: desired clock rate
- * @new_div: ptr to where we should store the divisor
- *
- * Finds 'best' divider value in an array based on the source and target
- * rates. The divider array must be sorted with smallest divider first.
- * This function is also used by the DPLL3 M2 divider code.
- *
- * Returns the rounded clock rate or returns 0xffffffff on error.
- */
-u32 omap2_clksel_round_rate_div(struct clk_hw_omap *clk,
- unsigned long target_rate,
- u32 *new_div)
-{
- unsigned long test_rate;
- const struct clksel *clks;
- const struct clksel_rate *clkr;
- u32 last_div = 0;
- struct clk *parent;
- unsigned long parent_rate;
- const char *clk_name;
-
- parent = __clk_get_parent(clk->hw.clk);
- clk_name = __clk_get_name(clk->hw.clk);
- parent_rate = __clk_get_rate(parent);
-
- if (!clk->clksel || !clk->clksel_mask)
- return ~0;
-
- pr_debug("clock: clksel_round_rate_div: %s target_rate %ld\n",
- clk_name, target_rate);
-
- *new_div = 1;
-
- clks = _get_clksel_by_parent(clk, parent);
- if (!clks)
- return ~0;
-
- for (clkr = clks->rates; clkr->div; clkr++) {
- if (!(clkr->flags & cpu_mask))
- continue;
-
- /* Sanity check */
- if (clkr->div <= last_div)
- pr_err("clock: %s: clksel_rate table not sorted\n",
- clk_name);
-
- last_div = clkr->div;
-
- test_rate = parent_rate / clkr->div;
-
- if (test_rate <= target_rate)
- break; /* found it */
- }
-
- if (!clkr->div) {
- pr_err("clock: %s: could not find divisor for target rate %ld for parent %s\n",
- clk_name, target_rate, __clk_get_name(parent));
- return ~0;
- }
-
- *new_div = clkr->div;
-
- pr_debug("clock: new_div = %d, new_rate = %ld\n", *new_div,
- (parent_rate / clkr->div));
-
- return parent_rate / clkr->div;
-}
-
-/*
- * Clocktype interface functions to the OMAP clock code
- * (i.e., those used in struct clk field function pointers, etc.)
- */
-
-/**
- * omap2_clksel_find_parent_index() - return the array index of the current
- * hardware parent of @hw
- * @hw: struct clk_hw * to find the current hardware parent of
- *
- * Given a struct clk_hw pointer @hw to the 'hw' member of a struct
- * clk_hw_omap record representing a source-selectable hardware clock,
- * read the hardware register and determine what its parent is
- * currently set to. Intended to be called only by the common clock
- * framework struct clk_hw_ops.get_parent function pointer. Return
- * the array index of this parent clock upon success -- there is no
- * way to return an error, so if we encounter an error, just WARN()
- * and pretend that we know that we're doing.
- */
-u8 omap2_clksel_find_parent_index(struct clk_hw *hw)
-{
- struct clk_hw_omap *clk = to_clk_hw_omap(hw);
- const struct clksel *clks;
- const struct clksel_rate *clkr;
- u32 r, found = 0;
- struct clk *parent;
- const char *clk_name;
- int ret = 0, f = 0;
-
- parent = __clk_get_parent(hw->clk);
- clk_name = __clk_get_name(hw->clk);
-
- /* XXX should be able to return an error */
- WARN((!clk->clksel || !clk->clksel_mask),
- "clock: %s: attempt to call on a non-clksel clock", clk_name);
-
- r = omap2_clk_readl(clk, clk->clksel_reg) & clk->clksel_mask;
- r >>= __ffs(clk->clksel_mask);
-
- for (clks = clk->clksel; clks->parent && !found; clks++) {
- for (clkr = clks->rates; clkr->div && !found; clkr++) {
- if (!(clkr->flags & cpu_mask))
- continue;
-
- if (clkr->val == r) {
- found = 1;
- ret = f;
- }
- }
- f++;
- }
-
- /* This indicates a data error */
- WARN(!found, "clock: %s: init parent: could not find regval %0x\n",
- clk_name, r);
-
- return ret;
-}
-
-
-/**
- * omap2_clksel_recalc() - function ptr to pass via struct clk .recalc field
- * @clk: struct clk *
- *
- * This function is intended to be called only by the clock framework.
- * Each clksel clock should have its struct clk .recalc field set to this
- * function. Returns the clock's current rate, based on its parent's rate
- * and its current divisor setting in the hardware.
- */
-unsigned long omap2_clksel_recalc(struct clk_hw *hw, unsigned long parent_rate)
-{
- unsigned long rate;
- u32 div = 0;
- struct clk_hw_omap *clk = to_clk_hw_omap(hw);
-
- if (!parent_rate)
- return 0;
-
- div = _read_divisor(clk);
- if (!div)
- rate = parent_rate;
- else
- rate = parent_rate / div;
-
- pr_debug("%s: recalc'd %s's rate to %lu (div %d)\n", __func__,
- __clk_get_name(hw->clk), rate, div);
-
- return rate;
-}
-
-/**
- * omap2_clksel_round_rate() - find rounded rate for the given clock and rate
- * @clk: OMAP struct clk to use
- * @target_rate: desired clock rate
- *
- * This function is intended to be called only by the clock framework.
- * Finds best target rate based on the source clock and possible dividers.
- * rates. The divider array must be sorted with smallest divider first.
- *
- * Returns the rounded clock rate or returns 0xffffffff on error.
- */
-long omap2_clksel_round_rate(struct clk_hw *hw, unsigned long target_rate,
- unsigned long *parent_rate)
-{
- struct clk_hw_omap *clk = to_clk_hw_omap(hw);
- u32 new_div;
-
- return omap2_clksel_round_rate_div(clk, target_rate, &new_div);
-}
-
-/**
- * omap2_clksel_set_rate() - program clock rate in hardware
- * @clk: struct clk * to program rate
- * @rate: target rate to program
- *
- * This function is intended to be called only by the clock framework.
- * Program @clk's rate to @rate in the hardware. The clock can be
- * either enabled or disabled when this happens, although if the clock
- * is enabled, some downstream devices may glitch or behave
- * unpredictably when the clock rate is changed - this depends on the
- * hardware. This function does not currently check the usecount of
- * the clock, so if multiple drivers are using the clock, and the rate
- * is changed, they will all be affected without any notification.
- * Returns -EINVAL upon error, or 0 upon success.
- */
-int omap2_clksel_set_rate(struct clk_hw *hw, unsigned long rate,
- unsigned long parent_rate)
-{
- struct clk_hw_omap *clk = to_clk_hw_omap(hw);
- u32 field_val, validrate, new_div = 0;
-
- if (!clk->clksel || !clk->clksel_mask)
- return -EINVAL;
-
- validrate = omap2_clksel_round_rate_div(clk, rate, &new_div);
- if (validrate != rate)
- return -EINVAL;
-
- field_val = _divisor_to_clksel(clk, new_div);
- if (field_val == ~0)
- return -EINVAL;
-
- _write_clksel_reg(clk, field_val);
-
- pr_debug("clock: %s: set rate to %ld\n", __clk_get_name(hw->clk),
- __clk_get_rate(hw->clk));
-
- return 0;
-}
-
-/*
- * Clksel parent setting function - not passed in struct clk function
- * pointer - instead, the OMAP clock code currently assumes that any
- * parent-setting clock is a clksel clock, and calls
- * omap2_clksel_set_parent() by default
- */
-
-/**
- * omap2_clksel_set_parent() - change a clock's parent clock
- * @clk: struct clk * of the child clock
- * @new_parent: struct clk * of the new parent clock
- *
- * This function is intended to be called only by the clock framework.
- * Change the parent clock of clock @clk to @new_parent. This is
- * intended to be used while @clk is disabled. This function does not
- * currently check the usecount of the clock, so if multiple drivers
- * are using the clock, and the parent is changed, they will all be
- * affected without any notification. Returns -EINVAL upon error, or
- * 0 upon success.
- */
-int omap2_clksel_set_parent(struct clk_hw *hw, u8 field_val)
-{
- struct clk_hw_omap *clk = to_clk_hw_omap(hw);
-
- if (!clk->clksel || !clk->clksel_mask)
- return -EINVAL;
-
- _write_clksel_reg(clk, field_val);
- return 0;
-}
diff --git a/arch/arm/mach-omap2/clock.h b/arch/arm/mach-omap2/clock.h
index ca8c42c..9efff4b 100644
--- a/arch/arm/mach-omap2/clock.h
+++ b/arch/arm/mach-omap2/clock.h
@@ -186,18 +186,6 @@ void omap3_dpll_deny_idle(struct clk_hw_omap *clk);
void __init omap2_clk_disable_clkdm_control(void);
-/* clkt_clksel.c public functions */
-u32 omap2_clksel_round_rate_div(struct clk_hw_omap *clk,
- unsigned long target_rate,
- u32 *new_div);
-u8 omap2_clksel_find_parent_index(struct clk_hw *hw);
-unsigned long omap2_clksel_recalc(struct clk_hw *hw, unsigned long parent_rate);
-long omap2_clksel_round_rate(struct clk_hw *hw, unsigned long target_rate,
- unsigned long *parent_rate);
-int omap2_clksel_set_rate(struct clk_hw *hw, unsigned long rate,
- unsigned long parent_rate);
-int omap2_clksel_set_parent(struct clk_hw *hw, u8 field_val);
-
int omap2_clk_enable_autoidle_all(void);
int omap2_clk_allow_idle(struct clk *clk);
int omap2_clk_deny_idle(struct clk *clk);
--
1.7.9.5
^ permalink raw reply related [flat|nested] 120+ messages in thread
* [PATCHv2 06/27] ARM: OMAP2+: clk: remove obsolete clksel support code
@ 2015-05-11 8:54 ` Tero Kristo
0 siblings, 0 replies; 120+ messages in thread
From: Tero Kristo @ 2015-05-11 8:54 UTC (permalink / raw)
To: linux-arm-kernel
The clksel clock type is no longer used for anything, it is rather
replaced with common clock divider code. Thus, remove the dead code
from kernel.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
---
arch/arm/mach-omap2/Makefile | 3 +-
arch/arm/mach-omap2/clkt_clksel.c | 466 -------------------------------------
arch/arm/mach-omap2/clock.h | 12 -
3 files changed, 1 insertion(+), 480 deletions(-)
delete mode 100644 arch/arm/mach-omap2/clkt_clksel.c
diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
index a2f5156..d03bc21 100644
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -12,8 +12,7 @@ obj-y := id.o io.o control.o mux.o devices.o fb.o serial.o timer.o pm.o \
hwmod-common = omap_hwmod.o omap_hwmod_reset.o \
omap_hwmod_common_data.o
-clock-common = clock.o clock_common_data.o \
- clkt_clksel.o
+clock-common = clock.o clock_common_data.o
secure-common = omap-smc.o omap-secure.o
obj-$(CONFIG_ARCH_OMAP2) += $(omap-2-3-common) $(hwmod-common)
diff --git a/arch/arm/mach-omap2/clkt_clksel.c b/arch/arm/mach-omap2/clkt_clksel.c
deleted file mode 100644
index 7ee2610..0000000
--- a/arch/arm/mach-omap2/clkt_clksel.c
+++ /dev/null
@@ -1,466 +0,0 @@
-/*
- * clkt_clksel.c - OMAP2/3/4 clksel clock functions
- *
- * Copyright (C) 2005-2008 Texas Instruments, Inc.
- * Copyright (C) 2004-2010 Nokia Corporation
- *
- * Contacts:
- * Richard Woodruff <r-woodruff2@ti.com>
- * Paul Walmsley
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- *
- * clksel clocks are clocks that do not have a fixed parent, or that
- * can divide their parent's rate, or possibly both at the same time, based
- * on the contents of a hardware register bitfield.
- *
- * All of the various mux and divider settings can be encoded into
- * struct clksel* data structures, and then these can be autogenerated
- * from some hardware database for each new chip generation. This
- * should avoid the need to write, review, and validate a lot of new
- * clock code for each new chip, since it can be exported from the SoC
- * design flow. This is now done on OMAP4.
- *
- * The fusion of mux and divider clocks is a software creation. In
- * hardware reality, the multiplexer (parent selection) and the
- * divider exist separately. XXX At some point these clksel clocks
- * should be split into "divider" clocks and "mux" clocks to better
- * match the hardware.
- *
- * (The name "clksel" comes from the name of the corresponding
- * register field in the OMAP2/3 family of SoCs.)
- *
- * XXX Currently these clocks are only used in the OMAP2/3/4 code, but
- * many of the OMAP1 clocks should be convertible to use this
- * mechanism.
- */
-#undef DEBUG
-
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/clk-provider.h>
-#include <linux/io.h>
-#include <linux/bug.h>
-
-#include "clock.h"
-
-/* Private functions */
-
-/**
- * _get_clksel_by_parent() - return clksel struct for a given clk & parent
- * @clk: OMAP struct clk ptr to inspect
- * @src_clk: OMAP struct clk ptr of the parent clk to search for
- *
- * Scan the struct clksel array associated with the clock to find
- * the element associated with the supplied parent clock address.
- * Returns a pointer to the struct clksel on success or NULL on error.
- */
-static const struct clksel *_get_clksel_by_parent(struct clk_hw_omap *clk,
- struct clk *src_clk)
-{
- const struct clksel *clks;
-
- if (!src_clk)
- return NULL;
-
- for (clks = clk->clksel; clks->parent; clks++)
- if (clks->parent == src_clk)
- break; /* Found the requested parent */
-
- if (!clks->parent) {
- /* This indicates a data problem */
- WARN(1, "clock: %s: could not find parent clock %s in clksel array\n",
- __clk_get_name(clk->hw.clk), __clk_get_name(src_clk));
- return NULL;
- }
-
- return clks;
-}
-
-/**
- * _write_clksel_reg() - program a clock's clksel register in hardware
- * @clk: struct clk * to program
- * @v: clksel bitfield value to program (with LSB at bit 0)
- *
- * Shift the clksel register bitfield value @v to its appropriate
- * location in the clksel register and write it in. This function
- * will ensure that the write to the clksel_reg reaches its
- * destination before returning -- important since PRM and CM register
- * accesses can be quite slow compared to ARM cycles -- but does not
- * take into account any time the hardware might take to switch the
- * clock source.
- */
-static void _write_clksel_reg(struct clk_hw_omap *clk, u32 field_val)
-{
- u32 v;
-
- v = omap2_clk_readl(clk, clk->clksel_reg);
- v &= ~clk->clksel_mask;
- v |= field_val << __ffs(clk->clksel_mask);
- omap2_clk_writel(v, clk, clk->clksel_reg);
-
- v = omap2_clk_readl(clk, clk->clksel_reg); /* OCP barrier */
-}
-
-/**
- * _clksel_to_divisor() - turn clksel field value into integer divider
- * @clk: OMAP struct clk to use
- * @field_val: register field value to find
- *
- * Given a struct clk of a rate-selectable clksel clock, and a register field
- * value to search for, find the corresponding clock divisor. The register
- * field value should be pre-masked and shifted down so the LSB is at bit 0
- * before calling. Returns 0 on error or returns the actual integer divisor
- * upon success.
- */
-static u32 _clksel_to_divisor(struct clk_hw_omap *clk, u32 field_val)
-{
- const struct clksel *clks;
- const struct clksel_rate *clkr;
- struct clk *parent;
-
- parent = __clk_get_parent(clk->hw.clk);
-
- clks = _get_clksel_by_parent(clk, parent);
- if (!clks)
- return 0;
-
- for (clkr = clks->rates; clkr->div; clkr++) {
- if (!(clkr->flags & cpu_mask))
- continue;
-
- if (clkr->val == field_val)
- break;
- }
-
- if (!clkr->div) {
- /* This indicates a data error */
- WARN(1, "clock: %s: could not find fieldval %d for parent %s\n",
- __clk_get_name(clk->hw.clk), field_val,
- __clk_get_name(parent));
- return 0;
- }
-
- return clkr->div;
-}
-
-/**
- * _divisor_to_clksel() - turn clksel integer divisor into a field value
- * @clk: OMAP struct clk to use
- * @div: integer divisor to search for
- *
- * Given a struct clk of a rate-selectable clksel clock, and a clock
- * divisor, find the corresponding register field value. Returns the
- * register field value _before_ left-shifting (i.e., LSB is at bit
- * 0); or returns 0xFFFFFFFF (~0) upon error.
- */
-static u32 _divisor_to_clksel(struct clk_hw_omap *clk, u32 div)
-{
- const struct clksel *clks;
- const struct clksel_rate *clkr;
- struct clk *parent;
-
- /* should never happen */
- WARN_ON(div == 0);
-
- parent = __clk_get_parent(clk->hw.clk);
- clks = _get_clksel_by_parent(clk, parent);
- if (!clks)
- return ~0;
-
- for (clkr = clks->rates; clkr->div; clkr++) {
- if (!(clkr->flags & cpu_mask))
- continue;
-
- if (clkr->div == div)
- break;
- }
-
- if (!clkr->div) {
- pr_err("clock: %s: could not find divisor %d for parent %s\n",
- __clk_get_name(clk->hw.clk), div,
- __clk_get_name(parent));
- return ~0;
- }
-
- return clkr->val;
-}
-
-/**
- * _read_divisor() - get current divisor applied to parent clock (from hdwr)
- * @clk: OMAP struct clk to use.
- *
- * Read the current divisor register value for @clk that is programmed
- * into the hardware, convert it into the actual divisor value, and
- * return it; or return 0 on error.
- */
-static u32 _read_divisor(struct clk_hw_omap *clk)
-{
- u32 v;
-
- if (!clk->clksel || !clk->clksel_mask)
- return 0;
-
- v = omap2_clk_readl(clk, clk->clksel_reg);
- v &= clk->clksel_mask;
- v >>= __ffs(clk->clksel_mask);
-
- return _clksel_to_divisor(clk, v);
-}
-
-/* Public functions */
-
-/**
- * omap2_clksel_round_rate_div() - find divisor for the given clock and rate
- * @clk: OMAP struct clk to use
- * @target_rate: desired clock rate
- * @new_div: ptr to where we should store the divisor
- *
- * Finds 'best' divider value in an array based on the source and target
- * rates. The divider array must be sorted with smallest divider first.
- * This function is also used by the DPLL3 M2 divider code.
- *
- * Returns the rounded clock rate or returns 0xffffffff on error.
- */
-u32 omap2_clksel_round_rate_div(struct clk_hw_omap *clk,
- unsigned long target_rate,
- u32 *new_div)
-{
- unsigned long test_rate;
- const struct clksel *clks;
- const struct clksel_rate *clkr;
- u32 last_div = 0;
- struct clk *parent;
- unsigned long parent_rate;
- const char *clk_name;
-
- parent = __clk_get_parent(clk->hw.clk);
- clk_name = __clk_get_name(clk->hw.clk);
- parent_rate = __clk_get_rate(parent);
-
- if (!clk->clksel || !clk->clksel_mask)
- return ~0;
-
- pr_debug("clock: clksel_round_rate_div: %s target_rate %ld\n",
- clk_name, target_rate);
-
- *new_div = 1;
-
- clks = _get_clksel_by_parent(clk, parent);
- if (!clks)
- return ~0;
-
- for (clkr = clks->rates; clkr->div; clkr++) {
- if (!(clkr->flags & cpu_mask))
- continue;
-
- /* Sanity check */
- if (clkr->div <= last_div)
- pr_err("clock: %s: clksel_rate table not sorted\n",
- clk_name);
-
- last_div = clkr->div;
-
- test_rate = parent_rate / clkr->div;
-
- if (test_rate <= target_rate)
- break; /* found it */
- }
-
- if (!clkr->div) {
- pr_err("clock: %s: could not find divisor for target rate %ld for parent %s\n",
- clk_name, target_rate, __clk_get_name(parent));
- return ~0;
- }
-
- *new_div = clkr->div;
-
- pr_debug("clock: new_div = %d, new_rate = %ld\n", *new_div,
- (parent_rate / clkr->div));
-
- return parent_rate / clkr->div;
-}
-
-/*
- * Clocktype interface functions to the OMAP clock code
- * (i.e., those used in struct clk field function pointers, etc.)
- */
-
-/**
- * omap2_clksel_find_parent_index() - return the array index of the current
- * hardware parent of @hw
- * @hw: struct clk_hw * to find the current hardware parent of
- *
- * Given a struct clk_hw pointer @hw to the 'hw' member of a struct
- * clk_hw_omap record representing a source-selectable hardware clock,
- * read the hardware register and determine what its parent is
- * currently set to. Intended to be called only by the common clock
- * framework struct clk_hw_ops.get_parent function pointer. Return
- * the array index of this parent clock upon success -- there is no
- * way to return an error, so if we encounter an error, just WARN()
- * and pretend that we know that we're doing.
- */
-u8 omap2_clksel_find_parent_index(struct clk_hw *hw)
-{
- struct clk_hw_omap *clk = to_clk_hw_omap(hw);
- const struct clksel *clks;
- const struct clksel_rate *clkr;
- u32 r, found = 0;
- struct clk *parent;
- const char *clk_name;
- int ret = 0, f = 0;
-
- parent = __clk_get_parent(hw->clk);
- clk_name = __clk_get_name(hw->clk);
-
- /* XXX should be able to return an error */
- WARN((!clk->clksel || !clk->clksel_mask),
- "clock: %s: attempt to call on a non-clksel clock", clk_name);
-
- r = omap2_clk_readl(clk, clk->clksel_reg) & clk->clksel_mask;
- r >>= __ffs(clk->clksel_mask);
-
- for (clks = clk->clksel; clks->parent && !found; clks++) {
- for (clkr = clks->rates; clkr->div && !found; clkr++) {
- if (!(clkr->flags & cpu_mask))
- continue;
-
- if (clkr->val == r) {
- found = 1;
- ret = f;
- }
- }
- f++;
- }
-
- /* This indicates a data error */
- WARN(!found, "clock: %s: init parent: could not find regval %0x\n",
- clk_name, r);
-
- return ret;
-}
-
-
-/**
- * omap2_clksel_recalc() - function ptr to pass via struct clk .recalc field
- * @clk: struct clk *
- *
- * This function is intended to be called only by the clock framework.
- * Each clksel clock should have its struct clk .recalc field set to this
- * function. Returns the clock's current rate, based on its parent's rate
- * and its current divisor setting in the hardware.
- */
-unsigned long omap2_clksel_recalc(struct clk_hw *hw, unsigned long parent_rate)
-{
- unsigned long rate;
- u32 div = 0;
- struct clk_hw_omap *clk = to_clk_hw_omap(hw);
-
- if (!parent_rate)
- return 0;
-
- div = _read_divisor(clk);
- if (!div)
- rate = parent_rate;
- else
- rate = parent_rate / div;
-
- pr_debug("%s: recalc'd %s's rate to %lu (div %d)\n", __func__,
- __clk_get_name(hw->clk), rate, div);
-
- return rate;
-}
-
-/**
- * omap2_clksel_round_rate() - find rounded rate for the given clock and rate
- * @clk: OMAP struct clk to use
- * @target_rate: desired clock rate
- *
- * This function is intended to be called only by the clock framework.
- * Finds best target rate based on the source clock and possible dividers.
- * rates. The divider array must be sorted with smallest divider first.
- *
- * Returns the rounded clock rate or returns 0xffffffff on error.
- */
-long omap2_clksel_round_rate(struct clk_hw *hw, unsigned long target_rate,
- unsigned long *parent_rate)
-{
- struct clk_hw_omap *clk = to_clk_hw_omap(hw);
- u32 new_div;
-
- return omap2_clksel_round_rate_div(clk, target_rate, &new_div);
-}
-
-/**
- * omap2_clksel_set_rate() - program clock rate in hardware
- * @clk: struct clk * to program rate
- * @rate: target rate to program
- *
- * This function is intended to be called only by the clock framework.
- * Program @clk's rate to @rate in the hardware. The clock can be
- * either enabled or disabled when this happens, although if the clock
- * is enabled, some downstream devices may glitch or behave
- * unpredictably when the clock rate is changed - this depends on the
- * hardware. This function does not currently check the usecount of
- * the clock, so if multiple drivers are using the clock, and the rate
- * is changed, they will all be affected without any notification.
- * Returns -EINVAL upon error, or 0 upon success.
- */
-int omap2_clksel_set_rate(struct clk_hw *hw, unsigned long rate,
- unsigned long parent_rate)
-{
- struct clk_hw_omap *clk = to_clk_hw_omap(hw);
- u32 field_val, validrate, new_div = 0;
-
- if (!clk->clksel || !clk->clksel_mask)
- return -EINVAL;
-
- validrate = omap2_clksel_round_rate_div(clk, rate, &new_div);
- if (validrate != rate)
- return -EINVAL;
-
- field_val = _divisor_to_clksel(clk, new_div);
- if (field_val == ~0)
- return -EINVAL;
-
- _write_clksel_reg(clk, field_val);
-
- pr_debug("clock: %s: set rate to %ld\n", __clk_get_name(hw->clk),
- __clk_get_rate(hw->clk));
-
- return 0;
-}
-
-/*
- * Clksel parent setting function - not passed in struct clk function
- * pointer - instead, the OMAP clock code currently assumes that any
- * parent-setting clock is a clksel clock, and calls
- * omap2_clksel_set_parent() by default
- */
-
-/**
- * omap2_clksel_set_parent() - change a clock's parent clock
- * @clk: struct clk * of the child clock
- * @new_parent: struct clk * of the new parent clock
- *
- * This function is intended to be called only by the clock framework.
- * Change the parent clock of clock @clk to @new_parent. This is
- * intended to be used while @clk is disabled. This function does not
- * currently check the usecount of the clock, so if multiple drivers
- * are using the clock, and the parent is changed, they will all be
- * affected without any notification. Returns -EINVAL upon error, or
- * 0 upon success.
- */
-int omap2_clksel_set_parent(struct clk_hw *hw, u8 field_val)
-{
- struct clk_hw_omap *clk = to_clk_hw_omap(hw);
-
- if (!clk->clksel || !clk->clksel_mask)
- return -EINVAL;
-
- _write_clksel_reg(clk, field_val);
- return 0;
-}
diff --git a/arch/arm/mach-omap2/clock.h b/arch/arm/mach-omap2/clock.h
index ca8c42c..9efff4b 100644
--- a/arch/arm/mach-omap2/clock.h
+++ b/arch/arm/mach-omap2/clock.h
@@ -186,18 +186,6 @@ void omap3_dpll_deny_idle(struct clk_hw_omap *clk);
void __init omap2_clk_disable_clkdm_control(void);
-/* clkt_clksel.c public functions */
-u32 omap2_clksel_round_rate_div(struct clk_hw_omap *clk,
- unsigned long target_rate,
- u32 *new_div);
-u8 omap2_clksel_find_parent_index(struct clk_hw *hw);
-unsigned long omap2_clksel_recalc(struct clk_hw *hw, unsigned long parent_rate);
-long omap2_clksel_round_rate(struct clk_hw *hw, unsigned long target_rate,
- unsigned long *parent_rate);
-int omap2_clksel_set_rate(struct clk_hw *hw, unsigned long rate,
- unsigned long parent_rate);
-int omap2_clksel_set_parent(struct clk_hw *hw, u8 field_val);
-
int omap2_clk_enable_autoidle_all(void);
int omap2_clk_allow_idle(struct clk *clk);
int omap2_clk_deny_idle(struct clk *clk);
--
1.7.9.5
^ permalink raw reply related [flat|nested] 120+ messages in thread
* [PATCHv2 07/27] ARM: OMAP2+: clock: remove clock_common_data.c file
2015-05-11 8:54 ` Tero Kristo
(?)
@ 2015-05-11 8:54 ` Tero Kristo
-1 siblings, 0 replies; 120+ messages in thread
From: Tero Kristo @ 2015-05-11 8:54 UTC (permalink / raw)
To: mturquette, tony, linux-omap, linux-clk, sboyd, paul; +Cc: linux-arm-kernel
This only contains clksel tables that were used with the legacy clock data.
Now that legacy clock data is completely gone, this file can be removed
also.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
---
arch/arm/mach-omap2/Makefile | 2 +-
arch/arm/mach-omap2/clock.h | 14 ----
arch/arm/mach-omap2/clock_common_data.c | 115 -------------------------------
3 files changed, 1 insertion(+), 130 deletions(-)
delete mode 100644 arch/arm/mach-omap2/clock_common_data.c
diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
index d03bc21..98d5030 100644
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -12,7 +12,7 @@ obj-y := id.o io.o control.o mux.o devices.o fb.o serial.o timer.o pm.o \
hwmod-common = omap_hwmod.o omap_hwmod_reset.o \
omap_hwmod_common_data.o
-clock-common = clock.o clock_common_data.o
+clock-common = clock.o
secure-common = omap-smc.o omap-secure.o
obj-$(CONFIG_ARCH_OMAP2) += $(omap-2-3-common) $(hwmod-common)
diff --git a/arch/arm/mach-omap2/clock.h b/arch/arm/mach-omap2/clock.h
index 9efff4b..b71d430 100644
--- a/arch/arm/mach-omap2/clock.h
+++ b/arch/arm/mach-omap2/clock.h
@@ -204,11 +204,6 @@ extern const struct clkops clkops_omap2_dflt;
extern struct clk_functions omap2_clk_functions;
-extern const struct clksel_rate gpt_32k_rates[];
-extern const struct clksel_rate gpt_sys_rates[];
-extern const struct clksel_rate gfx_l3_rates[];
-extern const struct clksel_rate dsp_ick_rates[];
-
extern const struct clk_hw_omap_ops clkhwops_wait;
extern const struct clk_hw_omap_ops clkhwops_omap3430es2_ssi_wait;
extern const struct clk_hw_omap_ops clkhwops_omap3430es2_dss_usbhost_wait;
@@ -217,15 +212,6 @@ extern const struct clk_hw_omap_ops clkhwops_am35xx_ipss_module_wait;
extern const struct clk_hw_omap_ops clkhwops_apll54;
extern const struct clk_hw_omap_ops clkhwops_apll96;
-/* clksel_rate blocks shared between OMAP44xx and AM33xx */
-extern const struct clksel_rate div_1_0_rates[];
-extern const struct clksel_rate div3_1to4_rates[];
-extern const struct clksel_rate div_1_1_rates[];
-extern const struct clksel_rate div_1_2_rates[];
-extern const struct clksel_rate div_1_3_rates[];
-extern const struct clksel_rate div_1_4_rates[];
-extern const struct clksel_rate div31_1to31_rates[];
-
extern int omap2_clkops_enable_clkdm(struct clk_hw *hw);
extern void omap2_clkops_disable_clkdm(struct clk_hw *hw);
diff --git a/arch/arm/mach-omap2/clock_common_data.c b/arch/arm/mach-omap2/clock_common_data.c
deleted file mode 100644
index 61b60df..0000000
--- a/arch/arm/mach-omap2/clock_common_data.c
+++ /dev/null
@@ -1,115 +0,0 @@
-/*
- * linux/arch/arm/mach-omap2/clock_common_data.c
- *
- * Copyright (C) 2005-2009 Texas Instruments, Inc.
- * Copyright (C) 2004-2009 Nokia Corporation
- *
- * Contacts:
- * Richard Woodruff <r-woodruff2@ti.com>
- * Paul Walmsley
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This file contains clock data that is common to both the OMAP2xxx and
- * OMAP3xxx clock definition files.
- */
-
-#include "clock.h"
-
-/* clksel_rate data common to 24xx/343x */
-const struct clksel_rate gpt_32k_rates[] = {
- { .div = 1, .val = 0, .flags = RATE_IN_24XX | RATE_IN_3XXX },
- { .div = 0 }
-};
-
-const struct clksel_rate gpt_sys_rates[] = {
- { .div = 1, .val = 1, .flags = RATE_IN_24XX | RATE_IN_3XXX },
- { .div = 0 }
-};
-
-const struct clksel_rate gfx_l3_rates[] = {
- { .div = 1, .val = 1, .flags = RATE_IN_24XX | RATE_IN_3XXX },
- { .div = 2, .val = 2, .flags = RATE_IN_24XX | RATE_IN_3XXX },
- { .div = 3, .val = 3, .flags = RATE_IN_243X | RATE_IN_3XXX },
- { .div = 4, .val = 4, .flags = RATE_IN_243X | RATE_IN_3XXX },
- { .div = 0 }
-};
-
-const struct clksel_rate dsp_ick_rates[] = {
- { .div = 1, .val = 1, .flags = RATE_IN_24XX },
- { .div = 2, .val = 2, .flags = RATE_IN_24XX },
- { .div = 3, .val = 3, .flags = RATE_IN_243X },
- { .div = 0 },
-};
-
-
-/* clksel_rate blocks shared between OMAP44xx and AM33xx */
-
-const struct clksel_rate div_1_0_rates[] = {
- { .div = 1, .val = 0, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
- { .div = 0 },
-};
-
-const struct clksel_rate div3_1to4_rates[] = {
- { .div = 1, .val = 0, .flags = RATE_IN_4430 },
- { .div = 2, .val = 1, .flags = RATE_IN_4430 },
- { .div = 4, .val = 2, .flags = RATE_IN_4430 },
- { .div = 0 },
-};
-
-const struct clksel_rate div_1_1_rates[] = {
- { .div = 1, .val = 1, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
- { .div = 0 },
-};
-
-const struct clksel_rate div_1_2_rates[] = {
- { .div = 1, .val = 2, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
- { .div = 0 },
-};
-
-const struct clksel_rate div_1_3_rates[] = {
- { .div = 1, .val = 3, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
- { .div = 0 },
-};
-
-const struct clksel_rate div_1_4_rates[] = {
- { .div = 1, .val = 4, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
- { .div = 0 },
-};
-
-const struct clksel_rate div31_1to31_rates[] = {
- { .div = 1, .val = 1, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
- { .div = 2, .val = 2, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
- { .div = 3, .val = 3, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
- { .div = 4, .val = 4, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
- { .div = 5, .val = 5, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
- { .div = 6, .val = 6, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
- { .div = 7, .val = 7, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
- { .div = 8, .val = 8, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
- { .div = 9, .val = 9, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
- { .div = 10, .val = 10, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
- { .div = 11, .val = 11, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
- { .div = 12, .val = 12, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
- { .div = 13, .val = 13, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
- { .div = 14, .val = 14, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
- { .div = 15, .val = 15, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
- { .div = 16, .val = 16, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
- { .div = 17, .val = 17, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
- { .div = 18, .val = 18, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
- { .div = 19, .val = 19, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
- { .div = 20, .val = 20, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
- { .div = 21, .val = 21, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
- { .div = 22, .val = 22, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
- { .div = 23, .val = 23, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
- { .div = 24, .val = 24, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
- { .div = 25, .val = 25, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
- { .div = 26, .val = 26, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
- { .div = 27, .val = 27, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
- { .div = 28, .val = 28, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
- { .div = 29, .val = 29, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
- { .div = 30, .val = 30, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
- { .div = 31, .val = 31, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
- { .div = 0 },
-};
--
1.7.9.5
^ permalink raw reply related [flat|nested] 120+ messages in thread
* [PATCHv2 07/27] ARM: OMAP2+: clock: remove clock_common_data.c file
@ 2015-05-11 8:54 ` Tero Kristo
0 siblings, 0 replies; 120+ messages in thread
From: Tero Kristo @ 2015-05-11 8:54 UTC (permalink / raw)
To: mturquette, tony, linux-omap, linux-clk, sboyd, paul; +Cc: linux-arm-kernel
This only contains clksel tables that were used with the legacy clock data.
Now that legacy clock data is completely gone, this file can be removed
also.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
---
arch/arm/mach-omap2/Makefile | 2 +-
arch/arm/mach-omap2/clock.h | 14 ----
arch/arm/mach-omap2/clock_common_data.c | 115 -------------------------------
3 files changed, 1 insertion(+), 130 deletions(-)
delete mode 100644 arch/arm/mach-omap2/clock_common_data.c
diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
index d03bc21..98d5030 100644
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -12,7 +12,7 @@ obj-y := id.o io.o control.o mux.o devices.o fb.o serial.o timer.o pm.o \
hwmod-common = omap_hwmod.o omap_hwmod_reset.o \
omap_hwmod_common_data.o
-clock-common = clock.o clock_common_data.o
+clock-common = clock.o
secure-common = omap-smc.o omap-secure.o
obj-$(CONFIG_ARCH_OMAP2) += $(omap-2-3-common) $(hwmod-common)
diff --git a/arch/arm/mach-omap2/clock.h b/arch/arm/mach-omap2/clock.h
index 9efff4b..b71d430 100644
--- a/arch/arm/mach-omap2/clock.h
+++ b/arch/arm/mach-omap2/clock.h
@@ -204,11 +204,6 @@ extern const struct clkops clkops_omap2_dflt;
extern struct clk_functions omap2_clk_functions;
-extern const struct clksel_rate gpt_32k_rates[];
-extern const struct clksel_rate gpt_sys_rates[];
-extern const struct clksel_rate gfx_l3_rates[];
-extern const struct clksel_rate dsp_ick_rates[];
-
extern const struct clk_hw_omap_ops clkhwops_wait;
extern const struct clk_hw_omap_ops clkhwops_omap3430es2_ssi_wait;
extern const struct clk_hw_omap_ops clkhwops_omap3430es2_dss_usbhost_wait;
@@ -217,15 +212,6 @@ extern const struct clk_hw_omap_ops clkhwops_am35xx_ipss_module_wait;
extern const struct clk_hw_omap_ops clkhwops_apll54;
extern const struct clk_hw_omap_ops clkhwops_apll96;
-/* clksel_rate blocks shared between OMAP44xx and AM33xx */
-extern const struct clksel_rate div_1_0_rates[];
-extern const struct clksel_rate div3_1to4_rates[];
-extern const struct clksel_rate div_1_1_rates[];
-extern const struct clksel_rate div_1_2_rates[];
-extern const struct clksel_rate div_1_3_rates[];
-extern const struct clksel_rate div_1_4_rates[];
-extern const struct clksel_rate div31_1to31_rates[];
-
extern int omap2_clkops_enable_clkdm(struct clk_hw *hw);
extern void omap2_clkops_disable_clkdm(struct clk_hw *hw);
diff --git a/arch/arm/mach-omap2/clock_common_data.c b/arch/arm/mach-omap2/clock_common_data.c
deleted file mode 100644
index 61b60df..0000000
--- a/arch/arm/mach-omap2/clock_common_data.c
+++ /dev/null
@@ -1,115 +0,0 @@
-/*
- * linux/arch/arm/mach-omap2/clock_common_data.c
- *
- * Copyright (C) 2005-2009 Texas Instruments, Inc.
- * Copyright (C) 2004-2009 Nokia Corporation
- *
- * Contacts:
- * Richard Woodruff <r-woodruff2@ti.com>
- * Paul Walmsley
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This file contains clock data that is common to both the OMAP2xxx and
- * OMAP3xxx clock definition files.
- */
-
-#include "clock.h"
-
-/* clksel_rate data common to 24xx/343x */
-const struct clksel_rate gpt_32k_rates[] = {
- { .div = 1, .val = 0, .flags = RATE_IN_24XX | RATE_IN_3XXX },
- { .div = 0 }
-};
-
-const struct clksel_rate gpt_sys_rates[] = {
- { .div = 1, .val = 1, .flags = RATE_IN_24XX | RATE_IN_3XXX },
- { .div = 0 }
-};
-
-const struct clksel_rate gfx_l3_rates[] = {
- { .div = 1, .val = 1, .flags = RATE_IN_24XX | RATE_IN_3XXX },
- { .div = 2, .val = 2, .flags = RATE_IN_24XX | RATE_IN_3XXX },
- { .div = 3, .val = 3, .flags = RATE_IN_243X | RATE_IN_3XXX },
- { .div = 4, .val = 4, .flags = RATE_IN_243X | RATE_IN_3XXX },
- { .div = 0 }
-};
-
-const struct clksel_rate dsp_ick_rates[] = {
- { .div = 1, .val = 1, .flags = RATE_IN_24XX },
- { .div = 2, .val = 2, .flags = RATE_IN_24XX },
- { .div = 3, .val = 3, .flags = RATE_IN_243X },
- { .div = 0 },
-};
-
-
-/* clksel_rate blocks shared between OMAP44xx and AM33xx */
-
-const struct clksel_rate div_1_0_rates[] = {
- { .div = 1, .val = 0, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
- { .div = 0 },
-};
-
-const struct clksel_rate div3_1to4_rates[] = {
- { .div = 1, .val = 0, .flags = RATE_IN_4430 },
- { .div = 2, .val = 1, .flags = RATE_IN_4430 },
- { .div = 4, .val = 2, .flags = RATE_IN_4430 },
- { .div = 0 },
-};
-
-const struct clksel_rate div_1_1_rates[] = {
- { .div = 1, .val = 1, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
- { .div = 0 },
-};
-
-const struct clksel_rate div_1_2_rates[] = {
- { .div = 1, .val = 2, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
- { .div = 0 },
-};
-
-const struct clksel_rate div_1_3_rates[] = {
- { .div = 1, .val = 3, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
- { .div = 0 },
-};
-
-const struct clksel_rate div_1_4_rates[] = {
- { .div = 1, .val = 4, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
- { .div = 0 },
-};
-
-const struct clksel_rate div31_1to31_rates[] = {
- { .div = 1, .val = 1, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
- { .div = 2, .val = 2, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
- { .div = 3, .val = 3, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
- { .div = 4, .val = 4, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
- { .div = 5, .val = 5, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
- { .div = 6, .val = 6, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
- { .div = 7, .val = 7, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
- { .div = 8, .val = 8, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
- { .div = 9, .val = 9, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
- { .div = 10, .val = 10, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
- { .div = 11, .val = 11, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
- { .div = 12, .val = 12, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
- { .div = 13, .val = 13, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
- { .div = 14, .val = 14, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
- { .div = 15, .val = 15, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
- { .div = 16, .val = 16, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
- { .div = 17, .val = 17, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
- { .div = 18, .val = 18, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
- { .div = 19, .val = 19, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
- { .div = 20, .val = 20, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
- { .div = 21, .val = 21, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
- { .div = 22, .val = 22, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
- { .div = 23, .val = 23, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
- { .div = 24, .val = 24, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
- { .div = 25, .val = 25, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
- { .div = 26, .val = 26, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
- { .div = 27, .val = 27, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
- { .div = 28, .val = 28, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
- { .div = 29, .val = 29, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
- { .div = 30, .val = 30, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
- { .div = 31, .val = 31, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
- { .div = 0 },
-};
--
1.7.9.5
^ permalink raw reply related [flat|nested] 120+ messages in thread
* [PATCHv2 07/27] ARM: OMAP2+: clock: remove clock_common_data.c file
@ 2015-05-11 8:54 ` Tero Kristo
0 siblings, 0 replies; 120+ messages in thread
From: Tero Kristo @ 2015-05-11 8:54 UTC (permalink / raw)
To: linux-arm-kernel
This only contains clksel tables that were used with the legacy clock data.
Now that legacy clock data is completely gone, this file can be removed
also.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
---
arch/arm/mach-omap2/Makefile | 2 +-
arch/arm/mach-omap2/clock.h | 14 ----
arch/arm/mach-omap2/clock_common_data.c | 115 -------------------------------
3 files changed, 1 insertion(+), 130 deletions(-)
delete mode 100644 arch/arm/mach-omap2/clock_common_data.c
diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
index d03bc21..98d5030 100644
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -12,7 +12,7 @@ obj-y := id.o io.o control.o mux.o devices.o fb.o serial.o timer.o pm.o \
hwmod-common = omap_hwmod.o omap_hwmod_reset.o \
omap_hwmod_common_data.o
-clock-common = clock.o clock_common_data.o
+clock-common = clock.o
secure-common = omap-smc.o omap-secure.o
obj-$(CONFIG_ARCH_OMAP2) += $(omap-2-3-common) $(hwmod-common)
diff --git a/arch/arm/mach-omap2/clock.h b/arch/arm/mach-omap2/clock.h
index 9efff4b..b71d430 100644
--- a/arch/arm/mach-omap2/clock.h
+++ b/arch/arm/mach-omap2/clock.h
@@ -204,11 +204,6 @@ extern const struct clkops clkops_omap2_dflt;
extern struct clk_functions omap2_clk_functions;
-extern const struct clksel_rate gpt_32k_rates[];
-extern const struct clksel_rate gpt_sys_rates[];
-extern const struct clksel_rate gfx_l3_rates[];
-extern const struct clksel_rate dsp_ick_rates[];
-
extern const struct clk_hw_omap_ops clkhwops_wait;
extern const struct clk_hw_omap_ops clkhwops_omap3430es2_ssi_wait;
extern const struct clk_hw_omap_ops clkhwops_omap3430es2_dss_usbhost_wait;
@@ -217,15 +212,6 @@ extern const struct clk_hw_omap_ops clkhwops_am35xx_ipss_module_wait;
extern const struct clk_hw_omap_ops clkhwops_apll54;
extern const struct clk_hw_omap_ops clkhwops_apll96;
-/* clksel_rate blocks shared between OMAP44xx and AM33xx */
-extern const struct clksel_rate div_1_0_rates[];
-extern const struct clksel_rate div3_1to4_rates[];
-extern const struct clksel_rate div_1_1_rates[];
-extern const struct clksel_rate div_1_2_rates[];
-extern const struct clksel_rate div_1_3_rates[];
-extern const struct clksel_rate div_1_4_rates[];
-extern const struct clksel_rate div31_1to31_rates[];
-
extern int omap2_clkops_enable_clkdm(struct clk_hw *hw);
extern void omap2_clkops_disable_clkdm(struct clk_hw *hw);
diff --git a/arch/arm/mach-omap2/clock_common_data.c b/arch/arm/mach-omap2/clock_common_data.c
deleted file mode 100644
index 61b60df..0000000
--- a/arch/arm/mach-omap2/clock_common_data.c
+++ /dev/null
@@ -1,115 +0,0 @@
-/*
- * linux/arch/arm/mach-omap2/clock_common_data.c
- *
- * Copyright (C) 2005-2009 Texas Instruments, Inc.
- * Copyright (C) 2004-2009 Nokia Corporation
- *
- * Contacts:
- * Richard Woodruff <r-woodruff2@ti.com>
- * Paul Walmsley
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This file contains clock data that is common to both the OMAP2xxx and
- * OMAP3xxx clock definition files.
- */
-
-#include "clock.h"
-
-/* clksel_rate data common to 24xx/343x */
-const struct clksel_rate gpt_32k_rates[] = {
- { .div = 1, .val = 0, .flags = RATE_IN_24XX | RATE_IN_3XXX },
- { .div = 0 }
-};
-
-const struct clksel_rate gpt_sys_rates[] = {
- { .div = 1, .val = 1, .flags = RATE_IN_24XX | RATE_IN_3XXX },
- { .div = 0 }
-};
-
-const struct clksel_rate gfx_l3_rates[] = {
- { .div = 1, .val = 1, .flags = RATE_IN_24XX | RATE_IN_3XXX },
- { .div = 2, .val = 2, .flags = RATE_IN_24XX | RATE_IN_3XXX },
- { .div = 3, .val = 3, .flags = RATE_IN_243X | RATE_IN_3XXX },
- { .div = 4, .val = 4, .flags = RATE_IN_243X | RATE_IN_3XXX },
- { .div = 0 }
-};
-
-const struct clksel_rate dsp_ick_rates[] = {
- { .div = 1, .val = 1, .flags = RATE_IN_24XX },
- { .div = 2, .val = 2, .flags = RATE_IN_24XX },
- { .div = 3, .val = 3, .flags = RATE_IN_243X },
- { .div = 0 },
-};
-
-
-/* clksel_rate blocks shared between OMAP44xx and AM33xx */
-
-const struct clksel_rate div_1_0_rates[] = {
- { .div = 1, .val = 0, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
- { .div = 0 },
-};
-
-const struct clksel_rate div3_1to4_rates[] = {
- { .div = 1, .val = 0, .flags = RATE_IN_4430 },
- { .div = 2, .val = 1, .flags = RATE_IN_4430 },
- { .div = 4, .val = 2, .flags = RATE_IN_4430 },
- { .div = 0 },
-};
-
-const struct clksel_rate div_1_1_rates[] = {
- { .div = 1, .val = 1, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
- { .div = 0 },
-};
-
-const struct clksel_rate div_1_2_rates[] = {
- { .div = 1, .val = 2, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
- { .div = 0 },
-};
-
-const struct clksel_rate div_1_3_rates[] = {
- { .div = 1, .val = 3, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
- { .div = 0 },
-};
-
-const struct clksel_rate div_1_4_rates[] = {
- { .div = 1, .val = 4, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
- { .div = 0 },
-};
-
-const struct clksel_rate div31_1to31_rates[] = {
- { .div = 1, .val = 1, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
- { .div = 2, .val = 2, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
- { .div = 3, .val = 3, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
- { .div = 4, .val = 4, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
- { .div = 5, .val = 5, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
- { .div = 6, .val = 6, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
- { .div = 7, .val = 7, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
- { .div = 8, .val = 8, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
- { .div = 9, .val = 9, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
- { .div = 10, .val = 10, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
- { .div = 11, .val = 11, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
- { .div = 12, .val = 12, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
- { .div = 13, .val = 13, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
- { .div = 14, .val = 14, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
- { .div = 15, .val = 15, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
- { .div = 16, .val = 16, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
- { .div = 17, .val = 17, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
- { .div = 18, .val = 18, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
- { .div = 19, .val = 19, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
- { .div = 20, .val = 20, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
- { .div = 21, .val = 21, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
- { .div = 22, .val = 22, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
- { .div = 23, .val = 23, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
- { .div = 24, .val = 24, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
- { .div = 25, .val = 25, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
- { .div = 26, .val = 26, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
- { .div = 27, .val = 27, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
- { .div = 28, .val = 28, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
- { .div = 29, .val = 29, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
- { .div = 30, .val = 30, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
- { .div = 31, .val = 31, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
- { .div = 0 },
-};
--
1.7.9.5
^ permalink raw reply related [flat|nested] 120+ messages in thread
* [PATCHv2 08/27] ARM: OMAP36xx: remove clock36xx.c/.h files
2015-05-11 8:54 ` Tero Kristo
(?)
@ 2015-05-11 8:54 ` Tero Kristo
-1 siblings, 0 replies; 120+ messages in thread
From: Tero Kristo @ 2015-05-11 8:54 UTC (permalink / raw)
To: mturquette, tony, linux-omap, linux-clk, sboyd, paul; +Cc: linux-arm-kernel
These files contain legacy clock implementations which are no longer used
for anything, thus remove them completely.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
---
arch/arm/mach-omap2/Makefile | 2 +-
arch/arm/mach-omap2/clock36xx.c | 69 ---------------------------------------
arch/arm/mach-omap2/clock36xx.h | 13 --------
3 files changed, 1 insertion(+), 83 deletions(-)
delete mode 100644 arch/arm/mach-omap2/clock36xx.c
delete mode 100644 arch/arm/mach-omap2/clock36xx.h
diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
index 98d5030..f33d011 100644
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -188,7 +188,7 @@ obj-$(CONFIG_ARCH_OMAP2) += clkt2xxx_dpll.o
obj-$(CONFIG_SOC_OMAP2430) += clock2430.o
obj-$(CONFIG_ARCH_OMAP3) += $(clock-common) clock3xxx.o
obj-$(CONFIG_ARCH_OMAP3) += clock34xx.o clkt34xx_dpll3m2.o
-obj-$(CONFIG_ARCH_OMAP3) += clock3517.o clock36xx.o
+obj-$(CONFIG_ARCH_OMAP3) += clock3517.o
obj-$(CONFIG_ARCH_OMAP3) += dpll3xxx.o
obj-$(CONFIG_ARCH_OMAP4) += $(clock-common)
obj-$(CONFIG_ARCH_OMAP4) += dpll3xxx.o
diff --git a/arch/arm/mach-omap2/clock36xx.c b/arch/arm/mach-omap2/clock36xx.c
deleted file mode 100644
index 91ccb96..0000000
--- a/arch/arm/mach-omap2/clock36xx.c
+++ /dev/null
@@ -1,69 +0,0 @@
-/*
- * OMAP36xx-specific clkops
- *
- * Copyright (C) 2010 Texas Instruments, Inc.
- * Copyright (C) 2010 Nokia Corporation
- *
- * Mike Turquette
- * Vijaykumar GN
- * Paul Walmsley
- *
- * Parts of this code are based on code written by
- * Richard Woodruff, Tony Lindgren, Tuukka Tikkanen, Karthik Dasu,
- * Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#undef DEBUG
-
-#include <linux/kernel.h>
-#include <linux/clk.h>
-#include <linux/clk-provider.h>
-#include <linux/io.h>
-
-#include "clock.h"
-#include "clock36xx.h"
-#define to_clk_divider(_hw) container_of(_hw, struct clk_divider, hw)
-
-/**
- * omap36xx_pwrdn_clk_enable_with_hsdiv_restore - enable clocks suffering
- * from HSDivider PWRDN problem Implements Errata ID: i556.
- * @clk: DPLL output struct clk
- *
- * 3630 only: dpll3_m3_ck, dpll4_m2_ck, dpll4_m3_ck, dpll4_m4_ck,
- * dpll4_m5_ck & dpll4_m6_ck dividers gets loaded with reset
- * valueafter their respective PWRDN bits are set. Any dummy write
- * (Any other value different from the Read value) to the
- * corresponding CM_CLKSEL register will refresh the dividers.
- */
-int omap36xx_pwrdn_clk_enable_with_hsdiv_restore(struct clk_hw *clk)
-{
- struct clk_divider *parent;
- struct clk_hw *parent_hw;
- u32 dummy_v, orig_v;
- struct clk_hw_omap *omap_clk = to_clk_hw_omap(clk);
- int ret;
-
- /* Clear PWRDN bit of HSDIVIDER */
- ret = omap2_dflt_clk_enable(clk);
-
- parent_hw = __clk_get_hw(__clk_get_parent(clk->clk));
- parent = to_clk_divider(parent_hw);
-
- /* Restore the dividers */
- if (!ret) {
- orig_v = omap2_clk_readl(omap_clk, parent->reg);
- dummy_v = orig_v;
-
- /* Write any other value different from the Read value */
- dummy_v ^= (1 << parent->shift);
- omap2_clk_writel(dummy_v, omap_clk, parent->reg);
-
- /* Write the original divider */
- omap2_clk_writel(orig_v, omap_clk, parent->reg);
- }
-
- return ret;
-}
diff --git a/arch/arm/mach-omap2/clock36xx.h b/arch/arm/mach-omap2/clock36xx.h
deleted file mode 100644
index 945bb7f..0000000
--- a/arch/arm/mach-omap2/clock36xx.h
+++ /dev/null
@@ -1,13 +0,0 @@
-/*
- * OMAP36xx clock function prototypes and macros
- *
- * Copyright (C) 2010 Texas Instruments, Inc.
- * Copyright (C) 2010 Nokia Corporation
- */
-
-#ifndef __ARCH_ARM_MACH_OMAP2_CLOCK36XX_H
-#define __ARCH_ARM_MACH_OMAP2_CLOCK36XX_H
-
-extern int omap36xx_pwrdn_clk_enable_with_hsdiv_restore(struct clk_hw *hw);
-
-#endif
--
1.7.9.5
^ permalink raw reply related [flat|nested] 120+ messages in thread
* [PATCHv2 08/27] ARM: OMAP36xx: remove clock36xx.c/.h files
@ 2015-05-11 8:54 ` Tero Kristo
0 siblings, 0 replies; 120+ messages in thread
From: Tero Kristo @ 2015-05-11 8:54 UTC (permalink / raw)
To: mturquette, tony, linux-omap, linux-clk, sboyd, paul; +Cc: linux-arm-kernel
These files contain legacy clock implementations which are no longer used
for anything, thus remove them completely.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
---
arch/arm/mach-omap2/Makefile | 2 +-
arch/arm/mach-omap2/clock36xx.c | 69 ---------------------------------------
arch/arm/mach-omap2/clock36xx.h | 13 --------
3 files changed, 1 insertion(+), 83 deletions(-)
delete mode 100644 arch/arm/mach-omap2/clock36xx.c
delete mode 100644 arch/arm/mach-omap2/clock36xx.h
diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
index 98d5030..f33d011 100644
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -188,7 +188,7 @@ obj-$(CONFIG_ARCH_OMAP2) += clkt2xxx_dpll.o
obj-$(CONFIG_SOC_OMAP2430) += clock2430.o
obj-$(CONFIG_ARCH_OMAP3) += $(clock-common) clock3xxx.o
obj-$(CONFIG_ARCH_OMAP3) += clock34xx.o clkt34xx_dpll3m2.o
-obj-$(CONFIG_ARCH_OMAP3) += clock3517.o clock36xx.o
+obj-$(CONFIG_ARCH_OMAP3) += clock3517.o
obj-$(CONFIG_ARCH_OMAP3) += dpll3xxx.o
obj-$(CONFIG_ARCH_OMAP4) += $(clock-common)
obj-$(CONFIG_ARCH_OMAP4) += dpll3xxx.o
diff --git a/arch/arm/mach-omap2/clock36xx.c b/arch/arm/mach-omap2/clock36xx.c
deleted file mode 100644
index 91ccb96..0000000
--- a/arch/arm/mach-omap2/clock36xx.c
+++ /dev/null
@@ -1,69 +0,0 @@
-/*
- * OMAP36xx-specific clkops
- *
- * Copyright (C) 2010 Texas Instruments, Inc.
- * Copyright (C) 2010 Nokia Corporation
- *
- * Mike Turquette
- * Vijaykumar GN
- * Paul Walmsley
- *
- * Parts of this code are based on code written by
- * Richard Woodruff, Tony Lindgren, Tuukka Tikkanen, Karthik Dasu,
- * Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#undef DEBUG
-
-#include <linux/kernel.h>
-#include <linux/clk.h>
-#include <linux/clk-provider.h>
-#include <linux/io.h>
-
-#include "clock.h"
-#include "clock36xx.h"
-#define to_clk_divider(_hw) container_of(_hw, struct clk_divider, hw)
-
-/**
- * omap36xx_pwrdn_clk_enable_with_hsdiv_restore - enable clocks suffering
- * from HSDivider PWRDN problem Implements Errata ID: i556.
- * @clk: DPLL output struct clk
- *
- * 3630 only: dpll3_m3_ck, dpll4_m2_ck, dpll4_m3_ck, dpll4_m4_ck,
- * dpll4_m5_ck & dpll4_m6_ck dividers gets loaded with reset
- * valueafter their respective PWRDN bits are set. Any dummy write
- * (Any other value different from the Read value) to the
- * corresponding CM_CLKSEL register will refresh the dividers.
- */
-int omap36xx_pwrdn_clk_enable_with_hsdiv_restore(struct clk_hw *clk)
-{
- struct clk_divider *parent;
- struct clk_hw *parent_hw;
- u32 dummy_v, orig_v;
- struct clk_hw_omap *omap_clk = to_clk_hw_omap(clk);
- int ret;
-
- /* Clear PWRDN bit of HSDIVIDER */
- ret = omap2_dflt_clk_enable(clk);
-
- parent_hw = __clk_get_hw(__clk_get_parent(clk->clk));
- parent = to_clk_divider(parent_hw);
-
- /* Restore the dividers */
- if (!ret) {
- orig_v = omap2_clk_readl(omap_clk, parent->reg);
- dummy_v = orig_v;
-
- /* Write any other value different from the Read value */
- dummy_v ^= (1 << parent->shift);
- omap2_clk_writel(dummy_v, omap_clk, parent->reg);
-
- /* Write the original divider */
- omap2_clk_writel(orig_v, omap_clk, parent->reg);
- }
-
- return ret;
-}
diff --git a/arch/arm/mach-omap2/clock36xx.h b/arch/arm/mach-omap2/clock36xx.h
deleted file mode 100644
index 945bb7f..0000000
--- a/arch/arm/mach-omap2/clock36xx.h
+++ /dev/null
@@ -1,13 +0,0 @@
-/*
- * OMAP36xx clock function prototypes and macros
- *
- * Copyright (C) 2010 Texas Instruments, Inc.
- * Copyright (C) 2010 Nokia Corporation
- */
-
-#ifndef __ARCH_ARM_MACH_OMAP2_CLOCK36XX_H
-#define __ARCH_ARM_MACH_OMAP2_CLOCK36XX_H
-
-extern int omap36xx_pwrdn_clk_enable_with_hsdiv_restore(struct clk_hw *hw);
-
-#endif
--
1.7.9.5
^ permalink raw reply related [flat|nested] 120+ messages in thread
* [PATCHv2 08/27] ARM: OMAP36xx: remove clock36xx.c/.h files
@ 2015-05-11 8:54 ` Tero Kristo
0 siblings, 0 replies; 120+ messages in thread
From: Tero Kristo @ 2015-05-11 8:54 UTC (permalink / raw)
To: linux-arm-kernel
These files contain legacy clock implementations which are no longer used
for anything, thus remove them completely.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
---
arch/arm/mach-omap2/Makefile | 2 +-
arch/arm/mach-omap2/clock36xx.c | 69 ---------------------------------------
arch/arm/mach-omap2/clock36xx.h | 13 --------
3 files changed, 1 insertion(+), 83 deletions(-)
delete mode 100644 arch/arm/mach-omap2/clock36xx.c
delete mode 100644 arch/arm/mach-omap2/clock36xx.h
diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
index 98d5030..f33d011 100644
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -188,7 +188,7 @@ obj-$(CONFIG_ARCH_OMAP2) += clkt2xxx_dpll.o
obj-$(CONFIG_SOC_OMAP2430) += clock2430.o
obj-$(CONFIG_ARCH_OMAP3) += $(clock-common) clock3xxx.o
obj-$(CONFIG_ARCH_OMAP3) += clock34xx.o clkt34xx_dpll3m2.o
-obj-$(CONFIG_ARCH_OMAP3) += clock3517.o clock36xx.o
+obj-$(CONFIG_ARCH_OMAP3) += clock3517.o
obj-$(CONFIG_ARCH_OMAP3) += dpll3xxx.o
obj-$(CONFIG_ARCH_OMAP4) += $(clock-common)
obj-$(CONFIG_ARCH_OMAP4) += dpll3xxx.o
diff --git a/arch/arm/mach-omap2/clock36xx.c b/arch/arm/mach-omap2/clock36xx.c
deleted file mode 100644
index 91ccb96..0000000
--- a/arch/arm/mach-omap2/clock36xx.c
+++ /dev/null
@@ -1,69 +0,0 @@
-/*
- * OMAP36xx-specific clkops
- *
- * Copyright (C) 2010 Texas Instruments, Inc.
- * Copyright (C) 2010 Nokia Corporation
- *
- * Mike Turquette
- * Vijaykumar GN
- * Paul Walmsley
- *
- * Parts of this code are based on code written by
- * Richard Woodruff, Tony Lindgren, Tuukka Tikkanen, Karthik Dasu,
- * Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#undef DEBUG
-
-#include <linux/kernel.h>
-#include <linux/clk.h>
-#include <linux/clk-provider.h>
-#include <linux/io.h>
-
-#include "clock.h"
-#include "clock36xx.h"
-#define to_clk_divider(_hw) container_of(_hw, struct clk_divider, hw)
-
-/**
- * omap36xx_pwrdn_clk_enable_with_hsdiv_restore - enable clocks suffering
- * from HSDivider PWRDN problem Implements Errata ID: i556.
- * @clk: DPLL output struct clk
- *
- * 3630 only: dpll3_m3_ck, dpll4_m2_ck, dpll4_m3_ck, dpll4_m4_ck,
- * dpll4_m5_ck & dpll4_m6_ck dividers gets loaded with reset
- * valueafter their respective PWRDN bits are set. Any dummy write
- * (Any other value different from the Read value) to the
- * corresponding CM_CLKSEL register will refresh the dividers.
- */
-int omap36xx_pwrdn_clk_enable_with_hsdiv_restore(struct clk_hw *clk)
-{
- struct clk_divider *parent;
- struct clk_hw *parent_hw;
- u32 dummy_v, orig_v;
- struct clk_hw_omap *omap_clk = to_clk_hw_omap(clk);
- int ret;
-
- /* Clear PWRDN bit of HSDIVIDER */
- ret = omap2_dflt_clk_enable(clk);
-
- parent_hw = __clk_get_hw(__clk_get_parent(clk->clk));
- parent = to_clk_divider(parent_hw);
-
- /* Restore the dividers */
- if (!ret) {
- orig_v = omap2_clk_readl(omap_clk, parent->reg);
- dummy_v = orig_v;
-
- /* Write any other value different from the Read value */
- dummy_v ^= (1 << parent->shift);
- omap2_clk_writel(dummy_v, omap_clk, parent->reg);
-
- /* Write the original divider */
- omap2_clk_writel(orig_v, omap_clk, parent->reg);
- }
-
- return ret;
-}
diff --git a/arch/arm/mach-omap2/clock36xx.h b/arch/arm/mach-omap2/clock36xx.h
deleted file mode 100644
index 945bb7f..0000000
--- a/arch/arm/mach-omap2/clock36xx.h
+++ /dev/null
@@ -1,13 +0,0 @@
-/*
- * OMAP36xx clock function prototypes and macros
- *
- * Copyright (C) 2010 Texas Instruments, Inc.
- * Copyright (C) 2010 Nokia Corporation
- */
-
-#ifndef __ARCH_ARM_MACH_OMAP2_CLOCK36XX_H
-#define __ARCH_ARM_MACH_OMAP2_CLOCK36XX_H
-
-extern int omap36xx_pwrdn_clk_enable_with_hsdiv_restore(struct clk_hw *hw);
-
-#endif
--
1.7.9.5
^ permalink raw reply related [flat|nested] 120+ messages in thread
* [PATCHv2 09/27] clk: ti: autoidle: move generic autoidle handling code to clock driver
2015-05-11 8:54 ` Tero Kristo
(?)
@ 2015-05-11 8:54 ` Tero Kristo
-1 siblings, 0 replies; 120+ messages in thread
From: Tero Kristo @ 2015-05-11 8:54 UTC (permalink / raw)
To: mturquette, tony, linux-omap, linux-clk, sboyd, paul; +Cc: linux-arm-kernel
This is no longer needed in platform directory, as the legacy clock data
is gone, so move it under TI clock driver. Some static functions are
renamed also.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
---
arch/arm/mach-omap2/clock.c | 104 -----------------------------------
arch/arm/mach-omap2/clock.h | 3 --
drivers/clk/ti/autoidle.c | 119 ++++++++++++++++++++++++++++++++++++++---
drivers/clk/ti/clock.h | 3 ++
drivers/clk/ti/fixed-factor.c | 2 +
include/linux/clk/ti.h | 13 ++---
6 files changed, 119 insertions(+), 125 deletions(-)
diff --git a/arch/arm/mach-omap2/clock.c b/arch/arm/mach-omap2/clock.c
index cbc65b3..42ce860 100644
--- a/arch/arm/mach-omap2/clock.c
+++ b/arch/arm/mach-omap2/clock.c
@@ -69,8 +69,6 @@ u16 cpu_mask;
*/
static bool clkdm_control = true;
-static LIST_HEAD(clk_hw_omap_clocks);
-
struct clk_iomap {
struct regmap *regmap;
void __iomem *mem;
@@ -579,108 +577,6 @@ static int __init omap_clk_setup(char *str)
__setup("mpurate=", omap_clk_setup);
/**
- * omap2_init_clk_hw_omap_clocks - initialize an OMAP clock
- * @clk: struct clk * to initialize
- *
- * Add an OMAP clock @clk to the internal list of OMAP clocks. Used
- * temporarily for autoidle handling, until this support can be
- * integrated into the common clock framework code in some way. No
- * return value.
- */
-void omap2_init_clk_hw_omap_clocks(struct clk *clk)
-{
- struct clk_hw_omap *c;
-
- if (__clk_get_flags(clk) & CLK_IS_BASIC)
- return;
-
- c = to_clk_hw_omap(__clk_get_hw(clk));
- list_add(&c->node, &clk_hw_omap_clocks);
-}
-
-/**
- * omap2_clk_enable_autoidle_all - enable autoidle on all OMAP clocks that
- * support it
- *
- * Enable clock autoidle on all OMAP clocks that have allow_idle
- * function pointers associated with them. This function is intended
- * to be temporary until support for this is added to the common clock
- * code. Returns 0.
- */
-int omap2_clk_enable_autoidle_all(void)
-{
- struct clk_hw_omap *c;
-
- list_for_each_entry(c, &clk_hw_omap_clocks, node)
- if (c->ops && c->ops->allow_idle)
- c->ops->allow_idle(c);
-
- of_ti_clk_allow_autoidle_all();
-
- return 0;
-}
-
-/**
- * omap2_clk_disable_autoidle_all - disable autoidle on all OMAP clocks that
- * support it
- *
- * Disable clock autoidle on all OMAP clocks that have allow_idle
- * function pointers associated with them. This function is intended
- * to be temporary until support for this is added to the common clock
- * code. Returns 0.
- */
-int omap2_clk_disable_autoidle_all(void)
-{
- struct clk_hw_omap *c;
-
- list_for_each_entry(c, &clk_hw_omap_clocks, node)
- if (c->ops && c->ops->deny_idle)
- c->ops->deny_idle(c);
-
- of_ti_clk_deny_autoidle_all();
-
- return 0;
-}
-
-/**
- * omap2_clk_deny_idle - disable autoidle on an OMAP clock
- * @clk: struct clk * to disable autoidle for
- *
- * Disable autoidle on an OMAP clock.
- */
-int omap2_clk_deny_idle(struct clk *clk)
-{
- struct clk_hw_omap *c;
-
- if (__clk_get_flags(clk) & CLK_IS_BASIC)
- return -EINVAL;
-
- c = to_clk_hw_omap(__clk_get_hw(clk));
- if (c->ops && c->ops->deny_idle)
- c->ops->deny_idle(c);
- return 0;
-}
-
-/**
- * omap2_clk_allow_idle - enable autoidle on an OMAP clock
- * @clk: struct clk * to enable autoidle for
- *
- * Enable autoidle on an OMAP clock.
- */
-int omap2_clk_allow_idle(struct clk *clk)
-{
- struct clk_hw_omap *c;
-
- if (__clk_get_flags(clk) & CLK_IS_BASIC)
- return -EINVAL;
-
- c = to_clk_hw_omap(__clk_get_hw(clk));
- if (c->ops && c->ops->allow_idle)
- c->ops->allow_idle(c);
- return 0;
-}
-
-/**
* omap2_clk_enable_init_clocks - prepare & enable a list of clocks
* @clk_names: ptr to an array of strings of clock names to enable
* @num_clocks: number of clock names in @clk_names
diff --git a/arch/arm/mach-omap2/clock.h b/arch/arm/mach-omap2/clock.h
index b71d430..950a17a 100644
--- a/arch/arm/mach-omap2/clock.h
+++ b/arch/arm/mach-omap2/clock.h
@@ -186,9 +186,6 @@ void omap3_dpll_deny_idle(struct clk_hw_omap *clk);
void __init omap2_clk_disable_clkdm_control(void);
-int omap2_clk_enable_autoidle_all(void);
-int omap2_clk_allow_idle(struct clk *clk);
-int omap2_clk_deny_idle(struct clk *clk);
int omap2_clk_switch_mpurate_at_boot(const char *mpurate_ck_name);
void omap2_clk_print_new_rates(const char *hfclkin_ck_name,
const char *core_ck_name,
diff --git a/drivers/clk/ti/autoidle.c b/drivers/clk/ti/autoidle.c
index e75c64c..3dbcc36 100644
--- a/drivers/clk/ti/autoidle.c
+++ b/drivers/clk/ti/autoidle.c
@@ -33,8 +33,47 @@ struct clk_ti_autoidle {
#define AUTOIDLE_LOW 0x1
static LIST_HEAD(autoidle_clks);
+static LIST_HEAD(clk_hw_omap_clocks);
-static void ti_allow_autoidle(struct clk_ti_autoidle *clk)
+/**
+ * omap2_clk_deny_idle - disable autoidle on an OMAP clock
+ * @clk: struct clk * to disable autoidle for
+ *
+ * Disable autoidle on an OMAP clock.
+ */
+int omap2_clk_deny_idle(struct clk *clk)
+{
+ struct clk_hw_omap *c;
+
+ if (__clk_get_flags(clk) & CLK_IS_BASIC)
+ return -EINVAL;
+
+ c = to_clk_hw_omap(__clk_get_hw(clk));
+ if (c->ops && c->ops->deny_idle)
+ c->ops->deny_idle(c);
+ return 0;
+}
+
+/**
+ * omap2_clk_allow_idle - enable autoidle on an OMAP clock
+ * @clk: struct clk * to enable autoidle for
+ *
+ * Enable autoidle on an OMAP clock.
+ */
+int omap2_clk_allow_idle(struct clk *clk)
+{
+ struct clk_hw_omap *c;
+
+ if (__clk_get_flags(clk) & CLK_IS_BASIC)
+ return -EINVAL;
+
+ c = to_clk_hw_omap(__clk_get_hw(clk));
+ if (c->ops && c->ops->allow_idle)
+ c->ops->allow_idle(c);
+ return 0;
+}
+
+static void _allow_autoidle(struct clk_ti_autoidle *clk)
{
u32 val;
@@ -48,7 +87,7 @@ static void ti_allow_autoidle(struct clk_ti_autoidle *clk)
ti_clk_ll_ops->clk_writel(val, clk->reg);
}
-static void ti_deny_autoidle(struct clk_ti_autoidle *clk)
+static void _deny_autoidle(struct clk_ti_autoidle *clk)
{
u32 val;
@@ -63,31 +102,31 @@ static void ti_deny_autoidle(struct clk_ti_autoidle *clk)
}
/**
- * of_ti_clk_allow_autoidle_all - enable autoidle for all clocks
+ * _clk_generic_allow_autoidle_all - enable autoidle for all clocks
*
* Enables hardware autoidle for all registered DT clocks, which have
* the feature.
*/
-void of_ti_clk_allow_autoidle_all(void)
+static void _clk_generic_allow_autoidle_all(void)
{
struct clk_ti_autoidle *c;
list_for_each_entry(c, &autoidle_clks, node)
- ti_allow_autoidle(c);
+ _allow_autoidle(c);
}
/**
- * of_ti_clk_deny_autoidle_all - disable autoidle for all clocks
+ * _clk_generic_deny_autoidle_all - disable autoidle for all clocks
*
* Disables hardware autoidle for all registered DT clocks, which have
* the feature.
*/
-void of_ti_clk_deny_autoidle_all(void)
+static void _clk_generic_deny_autoidle_all(void)
{
struct clk_ti_autoidle *c;
list_for_each_entry(c, &autoidle_clks, node)
- ti_deny_autoidle(c);
+ _deny_autoidle(c);
}
/**
@@ -131,3 +170,67 @@ int __init of_ti_clk_autoidle_setup(struct device_node *node)
return 0;
}
+
+/**
+ * omap2_init_clk_hw_omap_clocks - initialize an OMAP clock
+ * @clk: struct clk * to initialize
+ *
+ * Add an OMAP clock @clk to the internal list of OMAP clocks. Used
+ * temporarily for autoidle handling, until this support can be
+ * integrated into the common clock framework code in some way. No
+ * return value.
+ */
+void omap2_init_clk_hw_omap_clocks(struct clk *clk)
+{
+ struct clk_hw_omap *c;
+
+ if (__clk_get_flags(clk) & CLK_IS_BASIC)
+ return;
+
+ c = to_clk_hw_omap(__clk_get_hw(clk));
+ list_add(&c->node, &clk_hw_omap_clocks);
+}
+
+/**
+ * omap2_clk_enable_autoidle_all - enable autoidle on all OMAP clocks that
+ * support it
+ *
+ * Enable clock autoidle on all OMAP clocks that have allow_idle
+ * function pointers associated with them. This function is intended
+ * to be temporary until support for this is added to the common clock
+ * code. Returns 0.
+ */
+int omap2_clk_enable_autoidle_all(void)
+{
+ struct clk_hw_omap *c;
+
+ list_for_each_entry(c, &clk_hw_omap_clocks, node)
+ if (c->ops && c->ops->allow_idle)
+ c->ops->allow_idle(c);
+
+ _clk_generic_allow_autoidle_all();
+
+ return 0;
+}
+
+/**
+ * omap2_clk_disable_autoidle_all - disable autoidle on all OMAP clocks that
+ * support it
+ *
+ * Disable clock autoidle on all OMAP clocks that have allow_idle
+ * function pointers associated with them. This function is intended
+ * to be temporary until support for this is added to the common clock
+ * code. Returns 0.
+ */
+int omap2_clk_disable_autoidle_all(void)
+{
+ struct clk_hw_omap *c;
+
+ list_for_each_entry(c, &clk_hw_omap_clocks, node)
+ if (c->ops && c->ops->deny_idle)
+ c->ops->deny_idle(c);
+
+ _clk_generic_deny_autoidle_all();
+
+ return 0;
+}
diff --git a/drivers/clk/ti/clock.h b/drivers/clk/ti/clock.h
index a7256a9..9b51021 100644
--- a/drivers/clk/ti/clock.h
+++ b/drivers/clk/ti/clock.h
@@ -169,6 +169,9 @@ void ti_clk_patch_legacy_clks(struct ti_clk **patch);
struct clk *ti_clk_register_clk(struct ti_clk *setup);
int ti_clk_register_legacy_clks(struct ti_clk_alias *clks);
+void omap2_init_clk_hw_omap_clocks(struct clk *clk);
+int of_ti_clk_autoidle_setup(struct device_node *node);
+
extern const struct clk_hw_omap_ops clkhwops_omap4_dpllmx;
extern const struct clk_hw_omap_ops clkhwops_iclk;
extern const struct clk_hw_omap_ops clkhwops_iclk_wait;
diff --git a/drivers/clk/ti/fixed-factor.c b/drivers/clk/ti/fixed-factor.c
index c2c8a28..3cd4067 100644
--- a/drivers/clk/ti/fixed-factor.c
+++ b/drivers/clk/ti/fixed-factor.c
@@ -22,6 +22,8 @@
#include <linux/of_address.h>
#include <linux/clk/ti.h>
+#include "clock.h"
+
#undef pr_fmt
#define pr_fmt(fmt) "%s: " fmt, __func__
diff --git a/include/linux/clk/ti.h b/include/linux/clk/ti.h
index 63f2945..2e4b4fb 100644
--- a/include/linux/clk/ti.h
+++ b/include/linux/clk/ti.h
@@ -259,7 +259,6 @@ extern const struct clk_ops ti_clk_mux_ops;
#define to_clk_hw_omap(_hw) container_of(_hw, struct clk_hw_omap, hw)
-void omap2_init_clk_hw_omap_clocks(struct clk *clk);
int omap3_noncore_dpll_enable(struct clk_hw *hw);
void omap3_noncore_dpll_disable(struct clk_hw *hw);
int omap3_noncore_dpll_set_parent(struct clk_hw *hw, u8 index);
@@ -288,6 +287,9 @@ long omap3_clkoutx2_round_rate(struct clk_hw *hw, unsigned long rate,
int omap2_clkops_enable_clkdm(struct clk_hw *hw);
void omap2_clkops_disable_clkdm(struct clk_hw *hw);
int omap2_clk_disable_autoidle_all(void);
+int omap2_clk_enable_autoidle_all(void);
+int omap2_clk_allow_idle(struct clk *clk);
+int omap2_clk_deny_idle(struct clk *clk);
void omap2_clk_enable_init_clocks(const char **clk_names, u8 num_clocks);
int omap3_dpll4_set_rate(struct clk_hw *clk, unsigned long rate,
unsigned long parent_rate);
@@ -320,7 +322,6 @@ void ti_dt_clk_init_retry_clks(void);
void ti_dt_clockdomains_setup(void);
int ti_clk_retry_init(struct device_node *node, struct clk_hw *hw,
ti_of_clk_init_cb_t func);
-int of_ti_clk_autoidle_setup(struct device_node *node);
int ti_clk_add_component(struct device_node *node, struct clk_hw *hw, int type);
int omap3430_dt_clk_init(void);
@@ -351,14 +352,6 @@ struct ti_clk_features {
void ti_clk_setup_features(struct ti_clk_features *features);
struct ti_clk_features *ti_clk_get_features(void);
-#ifdef CONFIG_OF
-void of_ti_clk_allow_autoidle_all(void);
-void of_ti_clk_deny_autoidle_all(void);
-#else
-static inline void of_ti_clk_allow_autoidle_all(void) { }
-static inline void of_ti_clk_deny_autoidle_all(void) { }
-#endif
-
extern const struct clk_hw_omap_ops clkhwops_omap2xxx_dpll;
extern const struct clk_hw_omap_ops clkhwops_omap2430_i2chs_wait;
extern const struct clk_hw_omap_ops clkhwops_omap3_dpll;
--
1.7.9.5
^ permalink raw reply related [flat|nested] 120+ messages in thread
* [PATCHv2 09/27] clk: ti: autoidle: move generic autoidle handling code to clock driver
@ 2015-05-11 8:54 ` Tero Kristo
0 siblings, 0 replies; 120+ messages in thread
From: Tero Kristo @ 2015-05-11 8:54 UTC (permalink / raw)
To: mturquette, tony, linux-omap, linux-clk, sboyd, paul; +Cc: linux-arm-kernel
This is no longer needed in platform directory, as the legacy clock data
is gone, so move it under TI clock driver. Some static functions are
renamed also.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
---
arch/arm/mach-omap2/clock.c | 104 -----------------------------------
arch/arm/mach-omap2/clock.h | 3 --
drivers/clk/ti/autoidle.c | 119 ++++++++++++++++++++++++++++++++++++++---
drivers/clk/ti/clock.h | 3 ++
drivers/clk/ti/fixed-factor.c | 2 +
include/linux/clk/ti.h | 13 ++---
6 files changed, 119 insertions(+), 125 deletions(-)
diff --git a/arch/arm/mach-omap2/clock.c b/arch/arm/mach-omap2/clock.c
index cbc65b3..42ce860 100644
--- a/arch/arm/mach-omap2/clock.c
+++ b/arch/arm/mach-omap2/clock.c
@@ -69,8 +69,6 @@ u16 cpu_mask;
*/
static bool clkdm_control = true;
-static LIST_HEAD(clk_hw_omap_clocks);
-
struct clk_iomap {
struct regmap *regmap;
void __iomem *mem;
@@ -579,108 +577,6 @@ static int __init omap_clk_setup(char *str)
__setup("mpurate=", omap_clk_setup);
/**
- * omap2_init_clk_hw_omap_clocks - initialize an OMAP clock
- * @clk: struct clk * to initialize
- *
- * Add an OMAP clock @clk to the internal list of OMAP clocks. Used
- * temporarily for autoidle handling, until this support can be
- * integrated into the common clock framework code in some way. No
- * return value.
- */
-void omap2_init_clk_hw_omap_clocks(struct clk *clk)
-{
- struct clk_hw_omap *c;
-
- if (__clk_get_flags(clk) & CLK_IS_BASIC)
- return;
-
- c = to_clk_hw_omap(__clk_get_hw(clk));
- list_add(&c->node, &clk_hw_omap_clocks);
-}
-
-/**
- * omap2_clk_enable_autoidle_all - enable autoidle on all OMAP clocks that
- * support it
- *
- * Enable clock autoidle on all OMAP clocks that have allow_idle
- * function pointers associated with them. This function is intended
- * to be temporary until support for this is added to the common clock
- * code. Returns 0.
- */
-int omap2_clk_enable_autoidle_all(void)
-{
- struct clk_hw_omap *c;
-
- list_for_each_entry(c, &clk_hw_omap_clocks, node)
- if (c->ops && c->ops->allow_idle)
- c->ops->allow_idle(c);
-
- of_ti_clk_allow_autoidle_all();
-
- return 0;
-}
-
-/**
- * omap2_clk_disable_autoidle_all - disable autoidle on all OMAP clocks that
- * support it
- *
- * Disable clock autoidle on all OMAP clocks that have allow_idle
- * function pointers associated with them. This function is intended
- * to be temporary until support for this is added to the common clock
- * code. Returns 0.
- */
-int omap2_clk_disable_autoidle_all(void)
-{
- struct clk_hw_omap *c;
-
- list_for_each_entry(c, &clk_hw_omap_clocks, node)
- if (c->ops && c->ops->deny_idle)
- c->ops->deny_idle(c);
-
- of_ti_clk_deny_autoidle_all();
-
- return 0;
-}
-
-/**
- * omap2_clk_deny_idle - disable autoidle on an OMAP clock
- * @clk: struct clk * to disable autoidle for
- *
- * Disable autoidle on an OMAP clock.
- */
-int omap2_clk_deny_idle(struct clk *clk)
-{
- struct clk_hw_omap *c;
-
- if (__clk_get_flags(clk) & CLK_IS_BASIC)
- return -EINVAL;
-
- c = to_clk_hw_omap(__clk_get_hw(clk));
- if (c->ops && c->ops->deny_idle)
- c->ops->deny_idle(c);
- return 0;
-}
-
-/**
- * omap2_clk_allow_idle - enable autoidle on an OMAP clock
- * @clk: struct clk * to enable autoidle for
- *
- * Enable autoidle on an OMAP clock.
- */
-int omap2_clk_allow_idle(struct clk *clk)
-{
- struct clk_hw_omap *c;
-
- if (__clk_get_flags(clk) & CLK_IS_BASIC)
- return -EINVAL;
-
- c = to_clk_hw_omap(__clk_get_hw(clk));
- if (c->ops && c->ops->allow_idle)
- c->ops->allow_idle(c);
- return 0;
-}
-
-/**
* omap2_clk_enable_init_clocks - prepare & enable a list of clocks
* @clk_names: ptr to an array of strings of clock names to enable
* @num_clocks: number of clock names in @clk_names
diff --git a/arch/arm/mach-omap2/clock.h b/arch/arm/mach-omap2/clock.h
index b71d430..950a17a 100644
--- a/arch/arm/mach-omap2/clock.h
+++ b/arch/arm/mach-omap2/clock.h
@@ -186,9 +186,6 @@ void omap3_dpll_deny_idle(struct clk_hw_omap *clk);
void __init omap2_clk_disable_clkdm_control(void);
-int omap2_clk_enable_autoidle_all(void);
-int omap2_clk_allow_idle(struct clk *clk);
-int omap2_clk_deny_idle(struct clk *clk);
int omap2_clk_switch_mpurate_at_boot(const char *mpurate_ck_name);
void omap2_clk_print_new_rates(const char *hfclkin_ck_name,
const char *core_ck_name,
diff --git a/drivers/clk/ti/autoidle.c b/drivers/clk/ti/autoidle.c
index e75c64c..3dbcc36 100644
--- a/drivers/clk/ti/autoidle.c
+++ b/drivers/clk/ti/autoidle.c
@@ -33,8 +33,47 @@ struct clk_ti_autoidle {
#define AUTOIDLE_LOW 0x1
static LIST_HEAD(autoidle_clks);
+static LIST_HEAD(clk_hw_omap_clocks);
-static void ti_allow_autoidle(struct clk_ti_autoidle *clk)
+/**
+ * omap2_clk_deny_idle - disable autoidle on an OMAP clock
+ * @clk: struct clk * to disable autoidle for
+ *
+ * Disable autoidle on an OMAP clock.
+ */
+int omap2_clk_deny_idle(struct clk *clk)
+{
+ struct clk_hw_omap *c;
+
+ if (__clk_get_flags(clk) & CLK_IS_BASIC)
+ return -EINVAL;
+
+ c = to_clk_hw_omap(__clk_get_hw(clk));
+ if (c->ops && c->ops->deny_idle)
+ c->ops->deny_idle(c);
+ return 0;
+}
+
+/**
+ * omap2_clk_allow_idle - enable autoidle on an OMAP clock
+ * @clk: struct clk * to enable autoidle for
+ *
+ * Enable autoidle on an OMAP clock.
+ */
+int omap2_clk_allow_idle(struct clk *clk)
+{
+ struct clk_hw_omap *c;
+
+ if (__clk_get_flags(clk) & CLK_IS_BASIC)
+ return -EINVAL;
+
+ c = to_clk_hw_omap(__clk_get_hw(clk));
+ if (c->ops && c->ops->allow_idle)
+ c->ops->allow_idle(c);
+ return 0;
+}
+
+static void _allow_autoidle(struct clk_ti_autoidle *clk)
{
u32 val;
@@ -48,7 +87,7 @@ static void ti_allow_autoidle(struct clk_ti_autoidle *clk)
ti_clk_ll_ops->clk_writel(val, clk->reg);
}
-static void ti_deny_autoidle(struct clk_ti_autoidle *clk)
+static void _deny_autoidle(struct clk_ti_autoidle *clk)
{
u32 val;
@@ -63,31 +102,31 @@ static void ti_deny_autoidle(struct clk_ti_autoidle *clk)
}
/**
- * of_ti_clk_allow_autoidle_all - enable autoidle for all clocks
+ * _clk_generic_allow_autoidle_all - enable autoidle for all clocks
*
* Enables hardware autoidle for all registered DT clocks, which have
* the feature.
*/
-void of_ti_clk_allow_autoidle_all(void)
+static void _clk_generic_allow_autoidle_all(void)
{
struct clk_ti_autoidle *c;
list_for_each_entry(c, &autoidle_clks, node)
- ti_allow_autoidle(c);
+ _allow_autoidle(c);
}
/**
- * of_ti_clk_deny_autoidle_all - disable autoidle for all clocks
+ * _clk_generic_deny_autoidle_all - disable autoidle for all clocks
*
* Disables hardware autoidle for all registered DT clocks, which have
* the feature.
*/
-void of_ti_clk_deny_autoidle_all(void)
+static void _clk_generic_deny_autoidle_all(void)
{
struct clk_ti_autoidle *c;
list_for_each_entry(c, &autoidle_clks, node)
- ti_deny_autoidle(c);
+ _deny_autoidle(c);
}
/**
@@ -131,3 +170,67 @@ int __init of_ti_clk_autoidle_setup(struct device_node *node)
return 0;
}
+
+/**
+ * omap2_init_clk_hw_omap_clocks - initialize an OMAP clock
+ * @clk: struct clk * to initialize
+ *
+ * Add an OMAP clock @clk to the internal list of OMAP clocks. Used
+ * temporarily for autoidle handling, until this support can be
+ * integrated into the common clock framework code in some way. No
+ * return value.
+ */
+void omap2_init_clk_hw_omap_clocks(struct clk *clk)
+{
+ struct clk_hw_omap *c;
+
+ if (__clk_get_flags(clk) & CLK_IS_BASIC)
+ return;
+
+ c = to_clk_hw_omap(__clk_get_hw(clk));
+ list_add(&c->node, &clk_hw_omap_clocks);
+}
+
+/**
+ * omap2_clk_enable_autoidle_all - enable autoidle on all OMAP clocks that
+ * support it
+ *
+ * Enable clock autoidle on all OMAP clocks that have allow_idle
+ * function pointers associated with them. This function is intended
+ * to be temporary until support for this is added to the common clock
+ * code. Returns 0.
+ */
+int omap2_clk_enable_autoidle_all(void)
+{
+ struct clk_hw_omap *c;
+
+ list_for_each_entry(c, &clk_hw_omap_clocks, node)
+ if (c->ops && c->ops->allow_idle)
+ c->ops->allow_idle(c);
+
+ _clk_generic_allow_autoidle_all();
+
+ return 0;
+}
+
+/**
+ * omap2_clk_disable_autoidle_all - disable autoidle on all OMAP clocks that
+ * support it
+ *
+ * Disable clock autoidle on all OMAP clocks that have allow_idle
+ * function pointers associated with them. This function is intended
+ * to be temporary until support for this is added to the common clock
+ * code. Returns 0.
+ */
+int omap2_clk_disable_autoidle_all(void)
+{
+ struct clk_hw_omap *c;
+
+ list_for_each_entry(c, &clk_hw_omap_clocks, node)
+ if (c->ops && c->ops->deny_idle)
+ c->ops->deny_idle(c);
+
+ _clk_generic_deny_autoidle_all();
+
+ return 0;
+}
diff --git a/drivers/clk/ti/clock.h b/drivers/clk/ti/clock.h
index a7256a9..9b51021 100644
--- a/drivers/clk/ti/clock.h
+++ b/drivers/clk/ti/clock.h
@@ -169,6 +169,9 @@ void ti_clk_patch_legacy_clks(struct ti_clk **patch);
struct clk *ti_clk_register_clk(struct ti_clk *setup);
int ti_clk_register_legacy_clks(struct ti_clk_alias *clks);
+void omap2_init_clk_hw_omap_clocks(struct clk *clk);
+int of_ti_clk_autoidle_setup(struct device_node *node);
+
extern const struct clk_hw_omap_ops clkhwops_omap4_dpllmx;
extern const struct clk_hw_omap_ops clkhwops_iclk;
extern const struct clk_hw_omap_ops clkhwops_iclk_wait;
diff --git a/drivers/clk/ti/fixed-factor.c b/drivers/clk/ti/fixed-factor.c
index c2c8a28..3cd4067 100644
--- a/drivers/clk/ti/fixed-factor.c
+++ b/drivers/clk/ti/fixed-factor.c
@@ -22,6 +22,8 @@
#include <linux/of_address.h>
#include <linux/clk/ti.h>
+#include "clock.h"
+
#undef pr_fmt
#define pr_fmt(fmt) "%s: " fmt, __func__
diff --git a/include/linux/clk/ti.h b/include/linux/clk/ti.h
index 63f2945..2e4b4fb 100644
--- a/include/linux/clk/ti.h
+++ b/include/linux/clk/ti.h
@@ -259,7 +259,6 @@ extern const struct clk_ops ti_clk_mux_ops;
#define to_clk_hw_omap(_hw) container_of(_hw, struct clk_hw_omap, hw)
-void omap2_init_clk_hw_omap_clocks(struct clk *clk);
int omap3_noncore_dpll_enable(struct clk_hw *hw);
void omap3_noncore_dpll_disable(struct clk_hw *hw);
int omap3_noncore_dpll_set_parent(struct clk_hw *hw, u8 index);
@@ -288,6 +287,9 @@ long omap3_clkoutx2_round_rate(struct clk_hw *hw, unsigned long rate,
int omap2_clkops_enable_clkdm(struct clk_hw *hw);
void omap2_clkops_disable_clkdm(struct clk_hw *hw);
int omap2_clk_disable_autoidle_all(void);
+int omap2_clk_enable_autoidle_all(void);
+int omap2_clk_allow_idle(struct clk *clk);
+int omap2_clk_deny_idle(struct clk *clk);
void omap2_clk_enable_init_clocks(const char **clk_names, u8 num_clocks);
int omap3_dpll4_set_rate(struct clk_hw *clk, unsigned long rate,
unsigned long parent_rate);
@@ -320,7 +322,6 @@ void ti_dt_clk_init_retry_clks(void);
void ti_dt_clockdomains_setup(void);
int ti_clk_retry_init(struct device_node *node, struct clk_hw *hw,
ti_of_clk_init_cb_t func);
-int of_ti_clk_autoidle_setup(struct device_node *node);
int ti_clk_add_component(struct device_node *node, struct clk_hw *hw, int type);
int omap3430_dt_clk_init(void);
@@ -351,14 +352,6 @@ struct ti_clk_features {
void ti_clk_setup_features(struct ti_clk_features *features);
struct ti_clk_features *ti_clk_get_features(void);
-#ifdef CONFIG_OF
-void of_ti_clk_allow_autoidle_all(void);
-void of_ti_clk_deny_autoidle_all(void);
-#else
-static inline void of_ti_clk_allow_autoidle_all(void) { }
-static inline void of_ti_clk_deny_autoidle_all(void) { }
-#endif
-
extern const struct clk_hw_omap_ops clkhwops_omap2xxx_dpll;
extern const struct clk_hw_omap_ops clkhwops_omap2430_i2chs_wait;
extern const struct clk_hw_omap_ops clkhwops_omap3_dpll;
--
1.7.9.5
^ permalink raw reply related [flat|nested] 120+ messages in thread
* [PATCHv2 09/27] clk: ti: autoidle: move generic autoidle handling code to clock driver
@ 2015-05-11 8:54 ` Tero Kristo
0 siblings, 0 replies; 120+ messages in thread
From: Tero Kristo @ 2015-05-11 8:54 UTC (permalink / raw)
To: linux-arm-kernel
This is no longer needed in platform directory, as the legacy clock data
is gone, so move it under TI clock driver. Some static functions are
renamed also.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
---
arch/arm/mach-omap2/clock.c | 104 -----------------------------------
arch/arm/mach-omap2/clock.h | 3 --
drivers/clk/ti/autoidle.c | 119 ++++++++++++++++++++++++++++++++++++++---
drivers/clk/ti/clock.h | 3 ++
drivers/clk/ti/fixed-factor.c | 2 +
include/linux/clk/ti.h | 13 ++---
6 files changed, 119 insertions(+), 125 deletions(-)
diff --git a/arch/arm/mach-omap2/clock.c b/arch/arm/mach-omap2/clock.c
index cbc65b3..42ce860 100644
--- a/arch/arm/mach-omap2/clock.c
+++ b/arch/arm/mach-omap2/clock.c
@@ -69,8 +69,6 @@ u16 cpu_mask;
*/
static bool clkdm_control = true;
-static LIST_HEAD(clk_hw_omap_clocks);
-
struct clk_iomap {
struct regmap *regmap;
void __iomem *mem;
@@ -579,108 +577,6 @@ static int __init omap_clk_setup(char *str)
__setup("mpurate=", omap_clk_setup);
/**
- * omap2_init_clk_hw_omap_clocks - initialize an OMAP clock
- * @clk: struct clk * to initialize
- *
- * Add an OMAP clock @clk to the internal list of OMAP clocks. Used
- * temporarily for autoidle handling, until this support can be
- * integrated into the common clock framework code in some way. No
- * return value.
- */
-void omap2_init_clk_hw_omap_clocks(struct clk *clk)
-{
- struct clk_hw_omap *c;
-
- if (__clk_get_flags(clk) & CLK_IS_BASIC)
- return;
-
- c = to_clk_hw_omap(__clk_get_hw(clk));
- list_add(&c->node, &clk_hw_omap_clocks);
-}
-
-/**
- * omap2_clk_enable_autoidle_all - enable autoidle on all OMAP clocks that
- * support it
- *
- * Enable clock autoidle on all OMAP clocks that have allow_idle
- * function pointers associated with them. This function is intended
- * to be temporary until support for this is added to the common clock
- * code. Returns 0.
- */
-int omap2_clk_enable_autoidle_all(void)
-{
- struct clk_hw_omap *c;
-
- list_for_each_entry(c, &clk_hw_omap_clocks, node)
- if (c->ops && c->ops->allow_idle)
- c->ops->allow_idle(c);
-
- of_ti_clk_allow_autoidle_all();
-
- return 0;
-}
-
-/**
- * omap2_clk_disable_autoidle_all - disable autoidle on all OMAP clocks that
- * support it
- *
- * Disable clock autoidle on all OMAP clocks that have allow_idle
- * function pointers associated with them. This function is intended
- * to be temporary until support for this is added to the common clock
- * code. Returns 0.
- */
-int omap2_clk_disable_autoidle_all(void)
-{
- struct clk_hw_omap *c;
-
- list_for_each_entry(c, &clk_hw_omap_clocks, node)
- if (c->ops && c->ops->deny_idle)
- c->ops->deny_idle(c);
-
- of_ti_clk_deny_autoidle_all();
-
- return 0;
-}
-
-/**
- * omap2_clk_deny_idle - disable autoidle on an OMAP clock
- * @clk: struct clk * to disable autoidle for
- *
- * Disable autoidle on an OMAP clock.
- */
-int omap2_clk_deny_idle(struct clk *clk)
-{
- struct clk_hw_omap *c;
-
- if (__clk_get_flags(clk) & CLK_IS_BASIC)
- return -EINVAL;
-
- c = to_clk_hw_omap(__clk_get_hw(clk));
- if (c->ops && c->ops->deny_idle)
- c->ops->deny_idle(c);
- return 0;
-}
-
-/**
- * omap2_clk_allow_idle - enable autoidle on an OMAP clock
- * @clk: struct clk * to enable autoidle for
- *
- * Enable autoidle on an OMAP clock.
- */
-int omap2_clk_allow_idle(struct clk *clk)
-{
- struct clk_hw_omap *c;
-
- if (__clk_get_flags(clk) & CLK_IS_BASIC)
- return -EINVAL;
-
- c = to_clk_hw_omap(__clk_get_hw(clk));
- if (c->ops && c->ops->allow_idle)
- c->ops->allow_idle(c);
- return 0;
-}
-
-/**
* omap2_clk_enable_init_clocks - prepare & enable a list of clocks
* @clk_names: ptr to an array of strings of clock names to enable
* @num_clocks: number of clock names in @clk_names
diff --git a/arch/arm/mach-omap2/clock.h b/arch/arm/mach-omap2/clock.h
index b71d430..950a17a 100644
--- a/arch/arm/mach-omap2/clock.h
+++ b/arch/arm/mach-omap2/clock.h
@@ -186,9 +186,6 @@ void omap3_dpll_deny_idle(struct clk_hw_omap *clk);
void __init omap2_clk_disable_clkdm_control(void);
-int omap2_clk_enable_autoidle_all(void);
-int omap2_clk_allow_idle(struct clk *clk);
-int omap2_clk_deny_idle(struct clk *clk);
int omap2_clk_switch_mpurate_at_boot(const char *mpurate_ck_name);
void omap2_clk_print_new_rates(const char *hfclkin_ck_name,
const char *core_ck_name,
diff --git a/drivers/clk/ti/autoidle.c b/drivers/clk/ti/autoidle.c
index e75c64c..3dbcc36 100644
--- a/drivers/clk/ti/autoidle.c
+++ b/drivers/clk/ti/autoidle.c
@@ -33,8 +33,47 @@ struct clk_ti_autoidle {
#define AUTOIDLE_LOW 0x1
static LIST_HEAD(autoidle_clks);
+static LIST_HEAD(clk_hw_omap_clocks);
-static void ti_allow_autoidle(struct clk_ti_autoidle *clk)
+/**
+ * omap2_clk_deny_idle - disable autoidle on an OMAP clock
+ * @clk: struct clk * to disable autoidle for
+ *
+ * Disable autoidle on an OMAP clock.
+ */
+int omap2_clk_deny_idle(struct clk *clk)
+{
+ struct clk_hw_omap *c;
+
+ if (__clk_get_flags(clk) & CLK_IS_BASIC)
+ return -EINVAL;
+
+ c = to_clk_hw_omap(__clk_get_hw(clk));
+ if (c->ops && c->ops->deny_idle)
+ c->ops->deny_idle(c);
+ return 0;
+}
+
+/**
+ * omap2_clk_allow_idle - enable autoidle on an OMAP clock
+ * @clk: struct clk * to enable autoidle for
+ *
+ * Enable autoidle on an OMAP clock.
+ */
+int omap2_clk_allow_idle(struct clk *clk)
+{
+ struct clk_hw_omap *c;
+
+ if (__clk_get_flags(clk) & CLK_IS_BASIC)
+ return -EINVAL;
+
+ c = to_clk_hw_omap(__clk_get_hw(clk));
+ if (c->ops && c->ops->allow_idle)
+ c->ops->allow_idle(c);
+ return 0;
+}
+
+static void _allow_autoidle(struct clk_ti_autoidle *clk)
{
u32 val;
@@ -48,7 +87,7 @@ static void ti_allow_autoidle(struct clk_ti_autoidle *clk)
ti_clk_ll_ops->clk_writel(val, clk->reg);
}
-static void ti_deny_autoidle(struct clk_ti_autoidle *clk)
+static void _deny_autoidle(struct clk_ti_autoidle *clk)
{
u32 val;
@@ -63,31 +102,31 @@ static void ti_deny_autoidle(struct clk_ti_autoidle *clk)
}
/**
- * of_ti_clk_allow_autoidle_all - enable autoidle for all clocks
+ * _clk_generic_allow_autoidle_all - enable autoidle for all clocks
*
* Enables hardware autoidle for all registered DT clocks, which have
* the feature.
*/
-void of_ti_clk_allow_autoidle_all(void)
+static void _clk_generic_allow_autoidle_all(void)
{
struct clk_ti_autoidle *c;
list_for_each_entry(c, &autoidle_clks, node)
- ti_allow_autoidle(c);
+ _allow_autoidle(c);
}
/**
- * of_ti_clk_deny_autoidle_all - disable autoidle for all clocks
+ * _clk_generic_deny_autoidle_all - disable autoidle for all clocks
*
* Disables hardware autoidle for all registered DT clocks, which have
* the feature.
*/
-void of_ti_clk_deny_autoidle_all(void)
+static void _clk_generic_deny_autoidle_all(void)
{
struct clk_ti_autoidle *c;
list_for_each_entry(c, &autoidle_clks, node)
- ti_deny_autoidle(c);
+ _deny_autoidle(c);
}
/**
@@ -131,3 +170,67 @@ int __init of_ti_clk_autoidle_setup(struct device_node *node)
return 0;
}
+
+/**
+ * omap2_init_clk_hw_omap_clocks - initialize an OMAP clock
+ * @clk: struct clk * to initialize
+ *
+ * Add an OMAP clock @clk to the internal list of OMAP clocks. Used
+ * temporarily for autoidle handling, until this support can be
+ * integrated into the common clock framework code in some way. No
+ * return value.
+ */
+void omap2_init_clk_hw_omap_clocks(struct clk *clk)
+{
+ struct clk_hw_omap *c;
+
+ if (__clk_get_flags(clk) & CLK_IS_BASIC)
+ return;
+
+ c = to_clk_hw_omap(__clk_get_hw(clk));
+ list_add(&c->node, &clk_hw_omap_clocks);
+}
+
+/**
+ * omap2_clk_enable_autoidle_all - enable autoidle on all OMAP clocks that
+ * support it
+ *
+ * Enable clock autoidle on all OMAP clocks that have allow_idle
+ * function pointers associated with them. This function is intended
+ * to be temporary until support for this is added to the common clock
+ * code. Returns 0.
+ */
+int omap2_clk_enable_autoidle_all(void)
+{
+ struct clk_hw_omap *c;
+
+ list_for_each_entry(c, &clk_hw_omap_clocks, node)
+ if (c->ops && c->ops->allow_idle)
+ c->ops->allow_idle(c);
+
+ _clk_generic_allow_autoidle_all();
+
+ return 0;
+}
+
+/**
+ * omap2_clk_disable_autoidle_all - disable autoidle on all OMAP clocks that
+ * support it
+ *
+ * Disable clock autoidle on all OMAP clocks that have allow_idle
+ * function pointers associated with them. This function is intended
+ * to be temporary until support for this is added to the common clock
+ * code. Returns 0.
+ */
+int omap2_clk_disable_autoidle_all(void)
+{
+ struct clk_hw_omap *c;
+
+ list_for_each_entry(c, &clk_hw_omap_clocks, node)
+ if (c->ops && c->ops->deny_idle)
+ c->ops->deny_idle(c);
+
+ _clk_generic_deny_autoidle_all();
+
+ return 0;
+}
diff --git a/drivers/clk/ti/clock.h b/drivers/clk/ti/clock.h
index a7256a9..9b51021 100644
--- a/drivers/clk/ti/clock.h
+++ b/drivers/clk/ti/clock.h
@@ -169,6 +169,9 @@ void ti_clk_patch_legacy_clks(struct ti_clk **patch);
struct clk *ti_clk_register_clk(struct ti_clk *setup);
int ti_clk_register_legacy_clks(struct ti_clk_alias *clks);
+void omap2_init_clk_hw_omap_clocks(struct clk *clk);
+int of_ti_clk_autoidle_setup(struct device_node *node);
+
extern const struct clk_hw_omap_ops clkhwops_omap4_dpllmx;
extern const struct clk_hw_omap_ops clkhwops_iclk;
extern const struct clk_hw_omap_ops clkhwops_iclk_wait;
diff --git a/drivers/clk/ti/fixed-factor.c b/drivers/clk/ti/fixed-factor.c
index c2c8a28..3cd4067 100644
--- a/drivers/clk/ti/fixed-factor.c
+++ b/drivers/clk/ti/fixed-factor.c
@@ -22,6 +22,8 @@
#include <linux/of_address.h>
#include <linux/clk/ti.h>
+#include "clock.h"
+
#undef pr_fmt
#define pr_fmt(fmt) "%s: " fmt, __func__
diff --git a/include/linux/clk/ti.h b/include/linux/clk/ti.h
index 63f2945..2e4b4fb 100644
--- a/include/linux/clk/ti.h
+++ b/include/linux/clk/ti.h
@@ -259,7 +259,6 @@ extern const struct clk_ops ti_clk_mux_ops;
#define to_clk_hw_omap(_hw) container_of(_hw, struct clk_hw_omap, hw)
-void omap2_init_clk_hw_omap_clocks(struct clk *clk);
int omap3_noncore_dpll_enable(struct clk_hw *hw);
void omap3_noncore_dpll_disable(struct clk_hw *hw);
int omap3_noncore_dpll_set_parent(struct clk_hw *hw, u8 index);
@@ -288,6 +287,9 @@ long omap3_clkoutx2_round_rate(struct clk_hw *hw, unsigned long rate,
int omap2_clkops_enable_clkdm(struct clk_hw *hw);
void omap2_clkops_disable_clkdm(struct clk_hw *hw);
int omap2_clk_disable_autoidle_all(void);
+int omap2_clk_enable_autoidle_all(void);
+int omap2_clk_allow_idle(struct clk *clk);
+int omap2_clk_deny_idle(struct clk *clk);
void omap2_clk_enable_init_clocks(const char **clk_names, u8 num_clocks);
int omap3_dpll4_set_rate(struct clk_hw *clk, unsigned long rate,
unsigned long parent_rate);
@@ -320,7 +322,6 @@ void ti_dt_clk_init_retry_clks(void);
void ti_dt_clockdomains_setup(void);
int ti_clk_retry_init(struct device_node *node, struct clk_hw *hw,
ti_of_clk_init_cb_t func);
-int of_ti_clk_autoidle_setup(struct device_node *node);
int ti_clk_add_component(struct device_node *node, struct clk_hw *hw, int type);
int omap3430_dt_clk_init(void);
@@ -351,14 +352,6 @@ struct ti_clk_features {
void ti_clk_setup_features(struct ti_clk_features *features);
struct ti_clk_features *ti_clk_get_features(void);
-#ifdef CONFIG_OF
-void of_ti_clk_allow_autoidle_all(void);
-void of_ti_clk_deny_autoidle_all(void);
-#else
-static inline void of_ti_clk_allow_autoidle_all(void) { }
-static inline void of_ti_clk_deny_autoidle_all(void) { }
-#endif
-
extern const struct clk_hw_omap_ops clkhwops_omap2xxx_dpll;
extern const struct clk_hw_omap_ops clkhwops_omap2430_i2chs_wait;
extern const struct clk_hw_omap_ops clkhwops_omap3_dpll;
--
1.7.9.5
^ permalink raw reply related [flat|nested] 120+ messages in thread
* [PATCHv2 10/27] clk: ti: move omap2_clk_enable_init_clocks under clock driver
2015-05-11 8:54 ` Tero Kristo
(?)
@ 2015-05-11 8:54 ` Tero Kristo
-1 siblings, 0 replies; 120+ messages in thread
From: Tero Kristo @ 2015-05-11 8:54 UTC (permalink / raw)
To: mturquette, tony, linux-omap, linux-clk, sboyd, paul; +Cc: linux-arm-kernel
This is no longer used outside clock driver, so move it under the driver
and remove the export for it from the global header file.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
---
arch/arm/mach-omap2/clock.c | 24 ------------------------
drivers/clk/ti/clk-2xxx.c | 2 ++
drivers/clk/ti/clk-33xx.c | 2 ++
drivers/clk/ti/clk-3xxx.c | 1 +
drivers/clk/ti/clk-816x.c | 2 ++
drivers/clk/ti/clk.c | 24 ++++++++++++++++++++++++
drivers/clk/ti/clock.h | 1 +
include/linux/clk/ti.h | 1 -
8 files changed, 32 insertions(+), 25 deletions(-)
diff --git a/arch/arm/mach-omap2/clock.c b/arch/arm/mach-omap2/clock.c
index 42ce860..234cedf 100644
--- a/arch/arm/mach-omap2/clock.c
+++ b/arch/arm/mach-omap2/clock.c
@@ -576,30 +576,6 @@ static int __init omap_clk_setup(char *str)
}
__setup("mpurate=", omap_clk_setup);
-/**
- * omap2_clk_enable_init_clocks - prepare & enable a list of clocks
- * @clk_names: ptr to an array of strings of clock names to enable
- * @num_clocks: number of clock names in @clk_names
- *
- * Prepare and enable a list of clocks, named by @clk_names. No
- * return value. XXX Deprecated; only needed until these clocks are
- * properly claimed and enabled by the drivers or core code that uses
- * them. XXX What code disables & calls clk_put on these clocks?
- */
-void omap2_clk_enable_init_clocks(const char **clk_names, u8 num_clocks)
-{
- struct clk *init_clk;
- int i;
-
- for (i = 0; i < num_clocks; i++) {
- init_clk = clk_get(NULL, clk_names[i]);
- if (WARN(IS_ERR(init_clk), "could not find init clock %s\n",
- clk_names[i]))
- continue;
- clk_prepare_enable(init_clk);
- }
-}
-
const struct clk_hw_omap_ops clkhwops_wait = {
.find_idlest = omap2_clk_dflt_find_idlest,
.find_companion = omap2_clk_dflt_find_companion,
diff --git a/drivers/clk/ti/clk-2xxx.c b/drivers/clk/ti/clk-2xxx.c
index c808ab3..bd8790b 100644
--- a/drivers/clk/ti/clk-2xxx.c
+++ b/drivers/clk/ti/clk-2xxx.c
@@ -19,6 +19,8 @@
#include <linux/clk-provider.h>
#include <linux/clk/ti.h>
+#include "clock.h"
+
static struct ti_dt_clk omap2xxx_clks[] = {
DT_CLK(NULL, "func_32k_ck", "func_32k_ck"),
DT_CLK(NULL, "secure_32k_ck", "secure_32k_ck"),
diff --git a/drivers/clk/ti/clk-33xx.c b/drivers/clk/ti/clk-33xx.c
index 028b337..733f9d3 100644
--- a/drivers/clk/ti/clk-33xx.c
+++ b/drivers/clk/ti/clk-33xx.c
@@ -19,6 +19,8 @@
#include <linux/clk-provider.h>
#include <linux/clk/ti.h>
+#include "clock.h"
+
static struct ti_dt_clk am33xx_clks[] = {
DT_CLK(NULL, "clk_32768_ck", "clk_32768_ck"),
DT_CLK(NULL, "clk_rc32k_ck", "clk_rc32k_ck"),
diff --git a/drivers/clk/ti/clk-3xxx.c b/drivers/clk/ti/clk-3xxx.c
index 757636d..bb3b883 100644
--- a/drivers/clk/ti/clk-3xxx.c
+++ b/drivers/clk/ti/clk-3xxx.c
@@ -19,6 +19,7 @@
#include <linux/clk-provider.h>
#include <linux/clk/ti.h>
+#include "clock.h"
static struct ti_dt_clk omap3xxx_clks[] = {
DT_CLK(NULL, "apb_pclk", "dummy_apb_pclk"),
diff --git a/drivers/clk/ti/clk-816x.c b/drivers/clk/ti/clk-816x.c
index 9451e65..c69352b 100644
--- a/drivers/clk/ti/clk-816x.c
+++ b/drivers/clk/ti/clk-816x.c
@@ -14,6 +14,8 @@
#include <linux/clk-provider.h>
#include <linux/clk/ti.h>
+#include "clock.h"
+
static struct ti_dt_clk dm816x_clks[] = {
DT_CLK(NULL, "sys_clkin", "sys_clkin_ck"),
DT_CLK(NULL, "timer_sys_ck", "sys_clkin_ck"),
diff --git a/drivers/clk/ti/clk.c b/drivers/clk/ti/clk.c
index 567f8b9..f1dcd20 100644
--- a/drivers/clk/ti/clk.c
+++ b/drivers/clk/ti/clk.c
@@ -335,4 +335,28 @@ struct ti_clk_features *ti_clk_get_features(void)
{
return &ti_clk_features;
}
+
+/**
+ * omap2_clk_enable_init_clocks - prepare & enable a list of clocks
+ * @clk_names: ptr to an array of strings of clock names to enable
+ * @num_clocks: number of clock names in @clk_names
+ *
+ * Prepare and enable a list of clocks, named by @clk_names. No
+ * return value. XXX Deprecated; only needed until these clocks are
+ * properly claimed and enabled by the drivers or core code that uses
+ * them. XXX What code disables & calls clk_put on these clocks?
+ */
+void omap2_clk_enable_init_clocks(const char **clk_names, u8 num_clocks)
+{
+ struct clk *init_clk;
+ int i;
+
+ for (i = 0; i < num_clocks; i++) {
+ init_clk = clk_get(NULL, clk_names[i]);
+ if (WARN(IS_ERR(init_clk), "could not find init clock %s\n",
+ clk_names[i]))
+ continue;
+ clk_prepare_enable(init_clk);
+ }
+}
#endif
diff --git a/drivers/clk/ti/clock.h b/drivers/clk/ti/clock.h
index 9b51021..4b26af8 100644
--- a/drivers/clk/ti/clock.h
+++ b/drivers/clk/ti/clock.h
@@ -171,6 +171,7 @@ int ti_clk_register_legacy_clks(struct ti_clk_alias *clks);
void omap2_init_clk_hw_omap_clocks(struct clk *clk);
int of_ti_clk_autoidle_setup(struct device_node *node);
+void omap2_clk_enable_init_clocks(const char **clk_names, u8 num_clocks);
extern const struct clk_hw_omap_ops clkhwops_omap4_dpllmx;
extern const struct clk_hw_omap_ops clkhwops_iclk;
diff --git a/include/linux/clk/ti.h b/include/linux/clk/ti.h
index 2e4b4fb..43184c2 100644
--- a/include/linux/clk/ti.h
+++ b/include/linux/clk/ti.h
@@ -290,7 +290,6 @@ int omap2_clk_disable_autoidle_all(void);
int omap2_clk_enable_autoidle_all(void);
int omap2_clk_allow_idle(struct clk *clk);
int omap2_clk_deny_idle(struct clk *clk);
-void omap2_clk_enable_init_clocks(const char **clk_names, u8 num_clocks);
int omap3_dpll4_set_rate(struct clk_hw *clk, unsigned long rate,
unsigned long parent_rate);
int omap3_dpll4_set_rate_and_parent(struct clk_hw *hw, unsigned long rate,
--
1.7.9.5
^ permalink raw reply related [flat|nested] 120+ messages in thread
* [PATCHv2 10/27] clk: ti: move omap2_clk_enable_init_clocks under clock driver
@ 2015-05-11 8:54 ` Tero Kristo
0 siblings, 0 replies; 120+ messages in thread
From: Tero Kristo @ 2015-05-11 8:54 UTC (permalink / raw)
To: mturquette, tony, linux-omap, linux-clk, sboyd, paul; +Cc: linux-arm-kernel
This is no longer used outside clock driver, so move it under the driver
and remove the export for it from the global header file.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
---
arch/arm/mach-omap2/clock.c | 24 ------------------------
drivers/clk/ti/clk-2xxx.c | 2 ++
drivers/clk/ti/clk-33xx.c | 2 ++
drivers/clk/ti/clk-3xxx.c | 1 +
drivers/clk/ti/clk-816x.c | 2 ++
drivers/clk/ti/clk.c | 24 ++++++++++++++++++++++++
drivers/clk/ti/clock.h | 1 +
include/linux/clk/ti.h | 1 -
8 files changed, 32 insertions(+), 25 deletions(-)
diff --git a/arch/arm/mach-omap2/clock.c b/arch/arm/mach-omap2/clock.c
index 42ce860..234cedf 100644
--- a/arch/arm/mach-omap2/clock.c
+++ b/arch/arm/mach-omap2/clock.c
@@ -576,30 +576,6 @@ static int __init omap_clk_setup(char *str)
}
__setup("mpurate=", omap_clk_setup);
-/**
- * omap2_clk_enable_init_clocks - prepare & enable a list of clocks
- * @clk_names: ptr to an array of strings of clock names to enable
- * @num_clocks: number of clock names in @clk_names
- *
- * Prepare and enable a list of clocks, named by @clk_names. No
- * return value. XXX Deprecated; only needed until these clocks are
- * properly claimed and enabled by the drivers or core code that uses
- * them. XXX What code disables & calls clk_put on these clocks?
- */
-void omap2_clk_enable_init_clocks(const char **clk_names, u8 num_clocks)
-{
- struct clk *init_clk;
- int i;
-
- for (i = 0; i < num_clocks; i++) {
- init_clk = clk_get(NULL, clk_names[i]);
- if (WARN(IS_ERR(init_clk), "could not find init clock %s\n",
- clk_names[i]))
- continue;
- clk_prepare_enable(init_clk);
- }
-}
-
const struct clk_hw_omap_ops clkhwops_wait = {
.find_idlest = omap2_clk_dflt_find_idlest,
.find_companion = omap2_clk_dflt_find_companion,
diff --git a/drivers/clk/ti/clk-2xxx.c b/drivers/clk/ti/clk-2xxx.c
index c808ab3..bd8790b 100644
--- a/drivers/clk/ti/clk-2xxx.c
+++ b/drivers/clk/ti/clk-2xxx.c
@@ -19,6 +19,8 @@
#include <linux/clk-provider.h>
#include <linux/clk/ti.h>
+#include "clock.h"
+
static struct ti_dt_clk omap2xxx_clks[] = {
DT_CLK(NULL, "func_32k_ck", "func_32k_ck"),
DT_CLK(NULL, "secure_32k_ck", "secure_32k_ck"),
diff --git a/drivers/clk/ti/clk-33xx.c b/drivers/clk/ti/clk-33xx.c
index 028b337..733f9d3 100644
--- a/drivers/clk/ti/clk-33xx.c
+++ b/drivers/clk/ti/clk-33xx.c
@@ -19,6 +19,8 @@
#include <linux/clk-provider.h>
#include <linux/clk/ti.h>
+#include "clock.h"
+
static struct ti_dt_clk am33xx_clks[] = {
DT_CLK(NULL, "clk_32768_ck", "clk_32768_ck"),
DT_CLK(NULL, "clk_rc32k_ck", "clk_rc32k_ck"),
diff --git a/drivers/clk/ti/clk-3xxx.c b/drivers/clk/ti/clk-3xxx.c
index 757636d..bb3b883 100644
--- a/drivers/clk/ti/clk-3xxx.c
+++ b/drivers/clk/ti/clk-3xxx.c
@@ -19,6 +19,7 @@
#include <linux/clk-provider.h>
#include <linux/clk/ti.h>
+#include "clock.h"
static struct ti_dt_clk omap3xxx_clks[] = {
DT_CLK(NULL, "apb_pclk", "dummy_apb_pclk"),
diff --git a/drivers/clk/ti/clk-816x.c b/drivers/clk/ti/clk-816x.c
index 9451e65..c69352b 100644
--- a/drivers/clk/ti/clk-816x.c
+++ b/drivers/clk/ti/clk-816x.c
@@ -14,6 +14,8 @@
#include <linux/clk-provider.h>
#include <linux/clk/ti.h>
+#include "clock.h"
+
static struct ti_dt_clk dm816x_clks[] = {
DT_CLK(NULL, "sys_clkin", "sys_clkin_ck"),
DT_CLK(NULL, "timer_sys_ck", "sys_clkin_ck"),
diff --git a/drivers/clk/ti/clk.c b/drivers/clk/ti/clk.c
index 567f8b9..f1dcd20 100644
--- a/drivers/clk/ti/clk.c
+++ b/drivers/clk/ti/clk.c
@@ -335,4 +335,28 @@ struct ti_clk_features *ti_clk_get_features(void)
{
return &ti_clk_features;
}
+
+/**
+ * omap2_clk_enable_init_clocks - prepare & enable a list of clocks
+ * @clk_names: ptr to an array of strings of clock names to enable
+ * @num_clocks: number of clock names in @clk_names
+ *
+ * Prepare and enable a list of clocks, named by @clk_names. No
+ * return value. XXX Deprecated; only needed until these clocks are
+ * properly claimed and enabled by the drivers or core code that uses
+ * them. XXX What code disables & calls clk_put on these clocks?
+ */
+void omap2_clk_enable_init_clocks(const char **clk_names, u8 num_clocks)
+{
+ struct clk *init_clk;
+ int i;
+
+ for (i = 0; i < num_clocks; i++) {
+ init_clk = clk_get(NULL, clk_names[i]);
+ if (WARN(IS_ERR(init_clk), "could not find init clock %s\n",
+ clk_names[i]))
+ continue;
+ clk_prepare_enable(init_clk);
+ }
+}
#endif
diff --git a/drivers/clk/ti/clock.h b/drivers/clk/ti/clock.h
index 9b51021..4b26af8 100644
--- a/drivers/clk/ti/clock.h
+++ b/drivers/clk/ti/clock.h
@@ -171,6 +171,7 @@ int ti_clk_register_legacy_clks(struct ti_clk_alias *clks);
void omap2_init_clk_hw_omap_clocks(struct clk *clk);
int of_ti_clk_autoidle_setup(struct device_node *node);
+void omap2_clk_enable_init_clocks(const char **clk_names, u8 num_clocks);
extern const struct clk_hw_omap_ops clkhwops_omap4_dpllmx;
extern const struct clk_hw_omap_ops clkhwops_iclk;
diff --git a/include/linux/clk/ti.h b/include/linux/clk/ti.h
index 2e4b4fb..43184c2 100644
--- a/include/linux/clk/ti.h
+++ b/include/linux/clk/ti.h
@@ -290,7 +290,6 @@ int omap2_clk_disable_autoidle_all(void);
int omap2_clk_enable_autoidle_all(void);
int omap2_clk_allow_idle(struct clk *clk);
int omap2_clk_deny_idle(struct clk *clk);
-void omap2_clk_enable_init_clocks(const char **clk_names, u8 num_clocks);
int omap3_dpll4_set_rate(struct clk_hw *clk, unsigned long rate,
unsigned long parent_rate);
int omap3_dpll4_set_rate_and_parent(struct clk_hw *hw, unsigned long rate,
--
1.7.9.5
^ permalink raw reply related [flat|nested] 120+ messages in thread
* [PATCHv2 10/27] clk: ti: move omap2_clk_enable_init_clocks under clock driver
@ 2015-05-11 8:54 ` Tero Kristo
0 siblings, 0 replies; 120+ messages in thread
From: Tero Kristo @ 2015-05-11 8:54 UTC (permalink / raw)
To: linux-arm-kernel
This is no longer used outside clock driver, so move it under the driver
and remove the export for it from the global header file.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
---
arch/arm/mach-omap2/clock.c | 24 ------------------------
drivers/clk/ti/clk-2xxx.c | 2 ++
drivers/clk/ti/clk-33xx.c | 2 ++
drivers/clk/ti/clk-3xxx.c | 1 +
drivers/clk/ti/clk-816x.c | 2 ++
drivers/clk/ti/clk.c | 24 ++++++++++++++++++++++++
drivers/clk/ti/clock.h | 1 +
include/linux/clk/ti.h | 1 -
8 files changed, 32 insertions(+), 25 deletions(-)
diff --git a/arch/arm/mach-omap2/clock.c b/arch/arm/mach-omap2/clock.c
index 42ce860..234cedf 100644
--- a/arch/arm/mach-omap2/clock.c
+++ b/arch/arm/mach-omap2/clock.c
@@ -576,30 +576,6 @@ static int __init omap_clk_setup(char *str)
}
__setup("mpurate=", omap_clk_setup);
-/**
- * omap2_clk_enable_init_clocks - prepare & enable a list of clocks
- * @clk_names: ptr to an array of strings of clock names to enable
- * @num_clocks: number of clock names in @clk_names
- *
- * Prepare and enable a list of clocks, named by @clk_names. No
- * return value. XXX Deprecated; only needed until these clocks are
- * properly claimed and enabled by the drivers or core code that uses
- * them. XXX What code disables & calls clk_put on these clocks?
- */
-void omap2_clk_enable_init_clocks(const char **clk_names, u8 num_clocks)
-{
- struct clk *init_clk;
- int i;
-
- for (i = 0; i < num_clocks; i++) {
- init_clk = clk_get(NULL, clk_names[i]);
- if (WARN(IS_ERR(init_clk), "could not find init clock %s\n",
- clk_names[i]))
- continue;
- clk_prepare_enable(init_clk);
- }
-}
-
const struct clk_hw_omap_ops clkhwops_wait = {
.find_idlest = omap2_clk_dflt_find_idlest,
.find_companion = omap2_clk_dflt_find_companion,
diff --git a/drivers/clk/ti/clk-2xxx.c b/drivers/clk/ti/clk-2xxx.c
index c808ab3..bd8790b 100644
--- a/drivers/clk/ti/clk-2xxx.c
+++ b/drivers/clk/ti/clk-2xxx.c
@@ -19,6 +19,8 @@
#include <linux/clk-provider.h>
#include <linux/clk/ti.h>
+#include "clock.h"
+
static struct ti_dt_clk omap2xxx_clks[] = {
DT_CLK(NULL, "func_32k_ck", "func_32k_ck"),
DT_CLK(NULL, "secure_32k_ck", "secure_32k_ck"),
diff --git a/drivers/clk/ti/clk-33xx.c b/drivers/clk/ti/clk-33xx.c
index 028b337..733f9d3 100644
--- a/drivers/clk/ti/clk-33xx.c
+++ b/drivers/clk/ti/clk-33xx.c
@@ -19,6 +19,8 @@
#include <linux/clk-provider.h>
#include <linux/clk/ti.h>
+#include "clock.h"
+
static struct ti_dt_clk am33xx_clks[] = {
DT_CLK(NULL, "clk_32768_ck", "clk_32768_ck"),
DT_CLK(NULL, "clk_rc32k_ck", "clk_rc32k_ck"),
diff --git a/drivers/clk/ti/clk-3xxx.c b/drivers/clk/ti/clk-3xxx.c
index 757636d..bb3b883 100644
--- a/drivers/clk/ti/clk-3xxx.c
+++ b/drivers/clk/ti/clk-3xxx.c
@@ -19,6 +19,7 @@
#include <linux/clk-provider.h>
#include <linux/clk/ti.h>
+#include "clock.h"
static struct ti_dt_clk omap3xxx_clks[] = {
DT_CLK(NULL, "apb_pclk", "dummy_apb_pclk"),
diff --git a/drivers/clk/ti/clk-816x.c b/drivers/clk/ti/clk-816x.c
index 9451e65..c69352b 100644
--- a/drivers/clk/ti/clk-816x.c
+++ b/drivers/clk/ti/clk-816x.c
@@ -14,6 +14,8 @@
#include <linux/clk-provider.h>
#include <linux/clk/ti.h>
+#include "clock.h"
+
static struct ti_dt_clk dm816x_clks[] = {
DT_CLK(NULL, "sys_clkin", "sys_clkin_ck"),
DT_CLK(NULL, "timer_sys_ck", "sys_clkin_ck"),
diff --git a/drivers/clk/ti/clk.c b/drivers/clk/ti/clk.c
index 567f8b9..f1dcd20 100644
--- a/drivers/clk/ti/clk.c
+++ b/drivers/clk/ti/clk.c
@@ -335,4 +335,28 @@ struct ti_clk_features *ti_clk_get_features(void)
{
return &ti_clk_features;
}
+
+/**
+ * omap2_clk_enable_init_clocks - prepare & enable a list of clocks
+ * @clk_names: ptr to an array of strings of clock names to enable
+ * @num_clocks: number of clock names in @clk_names
+ *
+ * Prepare and enable a list of clocks, named by @clk_names. No
+ * return value. XXX Deprecated; only needed until these clocks are
+ * properly claimed and enabled by the drivers or core code that uses
+ * them. XXX What code disables & calls clk_put on these clocks?
+ */
+void omap2_clk_enable_init_clocks(const char **clk_names, u8 num_clocks)
+{
+ struct clk *init_clk;
+ int i;
+
+ for (i = 0; i < num_clocks; i++) {
+ init_clk = clk_get(NULL, clk_names[i]);
+ if (WARN(IS_ERR(init_clk), "could not find init clock %s\n",
+ clk_names[i]))
+ continue;
+ clk_prepare_enable(init_clk);
+ }
+}
#endif
diff --git a/drivers/clk/ti/clock.h b/drivers/clk/ti/clock.h
index 9b51021..4b26af8 100644
--- a/drivers/clk/ti/clock.h
+++ b/drivers/clk/ti/clock.h
@@ -171,6 +171,7 @@ int ti_clk_register_legacy_clks(struct ti_clk_alias *clks);
void omap2_init_clk_hw_omap_clocks(struct clk *clk);
int of_ti_clk_autoidle_setup(struct device_node *node);
+void omap2_clk_enable_init_clocks(const char **clk_names, u8 num_clocks);
extern const struct clk_hw_omap_ops clkhwops_omap4_dpllmx;
extern const struct clk_hw_omap_ops clkhwops_iclk;
diff --git a/include/linux/clk/ti.h b/include/linux/clk/ti.h
index 2e4b4fb..43184c2 100644
--- a/include/linux/clk/ti.h
+++ b/include/linux/clk/ti.h
@@ -290,7 +290,6 @@ int omap2_clk_disable_autoidle_all(void);
int omap2_clk_enable_autoidle_all(void);
int omap2_clk_allow_idle(struct clk *clk);
int omap2_clk_deny_idle(struct clk *clk);
-void omap2_clk_enable_init_clocks(const char **clk_names, u8 num_clocks);
int omap3_dpll4_set_rate(struct clk_hw *clk, unsigned long rate,
unsigned long parent_rate);
int omap3_dpll4_set_rate_and_parent(struct clk_hw *hw, unsigned long rate,
--
1.7.9.5
^ permalink raw reply related [flat|nested] 120+ messages in thread
* [PATCHv2 11/27] ARM: OMAP2+: clock: remove support for legacy mpurate command line param
2015-05-11 8:54 ` Tero Kristo
(?)
@ 2015-05-11 8:54 ` Tero Kristo
-1 siblings, 0 replies; 120+ messages in thread
From: Tero Kristo @ 2015-05-11 8:54 UTC (permalink / raw)
To: mturquette, tony, linux-omap, linux-clk, sboyd, paul; +Cc: linux-arm-kernel
The legacy support is wrong and dangerous, as it doesn't take any
OPPs into account and does not scale voltages. Switching mpurate should
be handled through cpufreq.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
---
arch/arm/mach-omap2/Makefile | 2 +-
arch/arm/mach-omap2/clock.c | 41 ----------------------------
arch/arm/mach-omap2/clock.h | 1 -
arch/arm/mach-omap2/clock2xxx.c | 57 ---------------------------------------
arch/arm/mach-omap2/clock3xxx.c | 25 -----------------
5 files changed, 1 insertion(+), 125 deletions(-)
delete mode 100644 arch/arm/mach-omap2/clock2xxx.c
diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
index f33d011..bf5d71d 100644
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -181,7 +181,7 @@ obj-$(CONFIG_SOC_DRA7XX) += $(clockdomain-common)
obj-$(CONFIG_SOC_DRA7XX) += clockdomains7xx_data.o
# Clock framework
-obj-$(CONFIG_ARCH_OMAP2) += $(clock-common) clock2xxx.o
+obj-$(CONFIG_ARCH_OMAP2) += $(clock-common)
obj-$(CONFIG_ARCH_OMAP2) += clkt2xxx_dpllcore.o
obj-$(CONFIG_ARCH_OMAP2) += clkt2xxx_virt_prcm_set.o
obj-$(CONFIG_ARCH_OMAP2) += clkt2xxx_dpll.o
diff --git a/arch/arm/mach-omap2/clock.c b/arch/arm/mach-omap2/clock.c
index 234cedf..94a4949 100644
--- a/arch/arm/mach-omap2/clock.c
+++ b/arch/arm/mach-omap2/clock.c
@@ -582,47 +582,6 @@ const struct clk_hw_omap_ops clkhwops_wait = {
};
/**
- * omap2_clk_switch_mpurate_at_boot - switch ARM MPU rate by boot-time argument
- * @mpurate_ck_name: clk name of the clock to change rate
- *
- * Change the ARM MPU clock rate to the rate specified on the command
- * line, if one was specified. @mpurate_ck_name should be
- * "virt_prcm_set" on OMAP2xxx and "dpll1_ck" on OMAP34xx/OMAP36xx.
- * XXX Does not handle voltage scaling - on OMAP2xxx this is currently
- * handled by the virt_prcm_set clock, but this should be handled by
- * the OPP layer. XXX This is intended to be handled by the OPP layer
- * code in the near future and should be removed from the clock code.
- * Returns -EINVAL if 'mpurate' is zero or if clk_set_rate() rejects
- * the rate, -ENOENT if the struct clk referred to by @mpurate_ck_name
- * cannot be found, or 0 upon success.
- */
-int __init omap2_clk_switch_mpurate_at_boot(const char *mpurate_ck_name)
-{
- struct clk *mpurate_ck;
- int r;
-
- if (!mpurate)
- return -EINVAL;
-
- mpurate_ck = clk_get(NULL, mpurate_ck_name);
- if (WARN(IS_ERR(mpurate_ck), "Failed to get %s.\n", mpurate_ck_name))
- return -ENOENT;
-
- r = clk_set_rate(mpurate_ck, mpurate);
- if (r < 0) {
- WARN(1, "clock: %s: unable to set MPU rate to %d: %d\n",
- mpurate_ck_name, mpurate, r);
- clk_put(mpurate_ck);
- return -EINVAL;
- }
-
- calibrate_delay();
- clk_put(mpurate_ck);
-
- return 0;
-}
-
-/**
* omap2_clk_print_new_rates - print summary of current clock tree rates
* @hfclkin_ck_name: clk name for the off-chip HF oscillator
* @core_ck_name: clk name for the on-chip CORE_CLK
diff --git a/arch/arm/mach-omap2/clock.h b/arch/arm/mach-omap2/clock.h
index 950a17a..e2781b4 100644
--- a/arch/arm/mach-omap2/clock.h
+++ b/arch/arm/mach-omap2/clock.h
@@ -186,7 +186,6 @@ void omap3_dpll_deny_idle(struct clk_hw_omap *clk);
void __init omap2_clk_disable_clkdm_control(void);
-int omap2_clk_switch_mpurate_at_boot(const char *mpurate_ck_name);
void omap2_clk_print_new_rates(const char *hfclkin_ck_name,
const char *core_ck_name,
const char *mpu_ck_name);
diff --git a/arch/arm/mach-omap2/clock2xxx.c b/arch/arm/mach-omap2/clock2xxx.c
deleted file mode 100644
index b870f6a..0000000
--- a/arch/arm/mach-omap2/clock2xxx.c
+++ /dev/null
@@ -1,57 +0,0 @@
-/*
- * clock2xxx.c - OMAP2xxx-specific clock integration code
- *
- * Copyright (C) 2005-2008 Texas Instruments, Inc.
- * Copyright (C) 2004-2010 Nokia Corporation
- *
- * Contacts:
- * Richard Woodruff <r-woodruff2@ti.com>
- * Paul Walmsley
- *
- * Based on earlier work by Tuukka Tikkanen, Tony Lindgren,
- * Gordon McNutt and RidgeRun, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#undef DEBUG
-
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-
-#include "soc.h"
-#include "clock.h"
-#include "clock2xxx.h"
-#include "cm.h"
-#include "cm-regbits-24xx.h"
-
-struct clk_hw *dclk_hw;
-/*
- * Omap24xx specific clock functions
- */
-
-/*
- * Switch the MPU rate if specified on cmdline. We cannot do this
- * early until cmdline is parsed. XXX This should be removed from the
- * clock code and handled by the OPP layer code in the near future.
- */
-static int __init omap2xxx_clk_arch_init(void)
-{
- int ret;
-
- if (!cpu_is_omap24xx())
- return 0;
-
- ret = omap2_clk_switch_mpurate_at_boot("virt_prcm_set");
- if (!ret)
- omap2_clk_print_new_rates("sys_ck", "dpll_ck", "mpu_ck");
-
- return ret;
-}
-
-omap_arch_initcall(omap2xxx_clk_arch_init);
-
-
diff --git a/arch/arm/mach-omap2/clock3xxx.c b/arch/arm/mach-omap2/clock3xxx.c
index 8bede6a..4bd6122 100644
--- a/arch/arm/mach-omap2/clock3xxx.c
+++ b/arch/arm/mach-omap2/clock3xxx.c
@@ -108,28 +108,3 @@ void __init omap3_clk_lock_dpll5(void)
clk_disable_unprepare(dpll5_clk);
return;
}
-
-/* Common clock code */
-
-/*
- * Switch the MPU rate if specified on cmdline. We cannot do this
- * early until cmdline is parsed. XXX This should be removed from the
- * clock code and handled by the OPP layer code in the near future.
- */
-static int __init omap3xxx_clk_arch_init(void)
-{
- int ret;
-
- if (!cpu_is_omap34xx())
- return 0;
-
- ret = omap2_clk_switch_mpurate_at_boot("dpll1_ck");
- if (!ret)
- omap2_clk_print_new_rates("osc_sys_ck", "core_ck", "arm_fck");
-
- return ret;
-}
-
-omap_arch_initcall(omap3xxx_clk_arch_init);
-
-
--
1.7.9.5
^ permalink raw reply related [flat|nested] 120+ messages in thread
* [PATCHv2 11/27] ARM: OMAP2+: clock: remove support for legacy mpurate command line param
@ 2015-05-11 8:54 ` Tero Kristo
0 siblings, 0 replies; 120+ messages in thread
From: Tero Kristo @ 2015-05-11 8:54 UTC (permalink / raw)
To: mturquette, tony, linux-omap, linux-clk, sboyd, paul; +Cc: linux-arm-kernel
The legacy support is wrong and dangerous, as it doesn't take any
OPPs into account and does not scale voltages. Switching mpurate should
be handled through cpufreq.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
---
arch/arm/mach-omap2/Makefile | 2 +-
arch/arm/mach-omap2/clock.c | 41 ----------------------------
arch/arm/mach-omap2/clock.h | 1 -
arch/arm/mach-omap2/clock2xxx.c | 57 ---------------------------------------
arch/arm/mach-omap2/clock3xxx.c | 25 -----------------
5 files changed, 1 insertion(+), 125 deletions(-)
delete mode 100644 arch/arm/mach-omap2/clock2xxx.c
diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
index f33d011..bf5d71d 100644
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -181,7 +181,7 @@ obj-$(CONFIG_SOC_DRA7XX) += $(clockdomain-common)
obj-$(CONFIG_SOC_DRA7XX) += clockdomains7xx_data.o
# Clock framework
-obj-$(CONFIG_ARCH_OMAP2) += $(clock-common) clock2xxx.o
+obj-$(CONFIG_ARCH_OMAP2) += $(clock-common)
obj-$(CONFIG_ARCH_OMAP2) += clkt2xxx_dpllcore.o
obj-$(CONFIG_ARCH_OMAP2) += clkt2xxx_virt_prcm_set.o
obj-$(CONFIG_ARCH_OMAP2) += clkt2xxx_dpll.o
diff --git a/arch/arm/mach-omap2/clock.c b/arch/arm/mach-omap2/clock.c
index 234cedf..94a4949 100644
--- a/arch/arm/mach-omap2/clock.c
+++ b/arch/arm/mach-omap2/clock.c
@@ -582,47 +582,6 @@ const struct clk_hw_omap_ops clkhwops_wait = {
};
/**
- * omap2_clk_switch_mpurate_at_boot - switch ARM MPU rate by boot-time argument
- * @mpurate_ck_name: clk name of the clock to change rate
- *
- * Change the ARM MPU clock rate to the rate specified on the command
- * line, if one was specified. @mpurate_ck_name should be
- * "virt_prcm_set" on OMAP2xxx and "dpll1_ck" on OMAP34xx/OMAP36xx.
- * XXX Does not handle voltage scaling - on OMAP2xxx this is currently
- * handled by the virt_prcm_set clock, but this should be handled by
- * the OPP layer. XXX This is intended to be handled by the OPP layer
- * code in the near future and should be removed from the clock code.
- * Returns -EINVAL if 'mpurate' is zero or if clk_set_rate() rejects
- * the rate, -ENOENT if the struct clk referred to by @mpurate_ck_name
- * cannot be found, or 0 upon success.
- */
-int __init omap2_clk_switch_mpurate_at_boot(const char *mpurate_ck_name)
-{
- struct clk *mpurate_ck;
- int r;
-
- if (!mpurate)
- return -EINVAL;
-
- mpurate_ck = clk_get(NULL, mpurate_ck_name);
- if (WARN(IS_ERR(mpurate_ck), "Failed to get %s.\n", mpurate_ck_name))
- return -ENOENT;
-
- r = clk_set_rate(mpurate_ck, mpurate);
- if (r < 0) {
- WARN(1, "clock: %s: unable to set MPU rate to %d: %d\n",
- mpurate_ck_name, mpurate, r);
- clk_put(mpurate_ck);
- return -EINVAL;
- }
-
- calibrate_delay();
- clk_put(mpurate_ck);
-
- return 0;
-}
-
-/**
* omap2_clk_print_new_rates - print summary of current clock tree rates
* @hfclkin_ck_name: clk name for the off-chip HF oscillator
* @core_ck_name: clk name for the on-chip CORE_CLK
diff --git a/arch/arm/mach-omap2/clock.h b/arch/arm/mach-omap2/clock.h
index 950a17a..e2781b4 100644
--- a/arch/arm/mach-omap2/clock.h
+++ b/arch/arm/mach-omap2/clock.h
@@ -186,7 +186,6 @@ void omap3_dpll_deny_idle(struct clk_hw_omap *clk);
void __init omap2_clk_disable_clkdm_control(void);
-int omap2_clk_switch_mpurate_at_boot(const char *mpurate_ck_name);
void omap2_clk_print_new_rates(const char *hfclkin_ck_name,
const char *core_ck_name,
const char *mpu_ck_name);
diff --git a/arch/arm/mach-omap2/clock2xxx.c b/arch/arm/mach-omap2/clock2xxx.c
deleted file mode 100644
index b870f6a..0000000
--- a/arch/arm/mach-omap2/clock2xxx.c
+++ /dev/null
@@ -1,57 +0,0 @@
-/*
- * clock2xxx.c - OMAP2xxx-specific clock integration code
- *
- * Copyright (C) 2005-2008 Texas Instruments, Inc.
- * Copyright (C) 2004-2010 Nokia Corporation
- *
- * Contacts:
- * Richard Woodruff <r-woodruff2@ti.com>
- * Paul Walmsley
- *
- * Based on earlier work by Tuukka Tikkanen, Tony Lindgren,
- * Gordon McNutt and RidgeRun, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#undef DEBUG
-
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-
-#include "soc.h"
-#include "clock.h"
-#include "clock2xxx.h"
-#include "cm.h"
-#include "cm-regbits-24xx.h"
-
-struct clk_hw *dclk_hw;
-/*
- * Omap24xx specific clock functions
- */
-
-/*
- * Switch the MPU rate if specified on cmdline. We cannot do this
- * early until cmdline is parsed. XXX This should be removed from the
- * clock code and handled by the OPP layer code in the near future.
- */
-static int __init omap2xxx_clk_arch_init(void)
-{
- int ret;
-
- if (!cpu_is_omap24xx())
- return 0;
-
- ret = omap2_clk_switch_mpurate_at_boot("virt_prcm_set");
- if (!ret)
- omap2_clk_print_new_rates("sys_ck", "dpll_ck", "mpu_ck");
-
- return ret;
-}
-
-omap_arch_initcall(omap2xxx_clk_arch_init);
-
-
diff --git a/arch/arm/mach-omap2/clock3xxx.c b/arch/arm/mach-omap2/clock3xxx.c
index 8bede6a..4bd6122 100644
--- a/arch/arm/mach-omap2/clock3xxx.c
+++ b/arch/arm/mach-omap2/clock3xxx.c
@@ -108,28 +108,3 @@ void __init omap3_clk_lock_dpll5(void)
clk_disable_unprepare(dpll5_clk);
return;
}
-
-/* Common clock code */
-
-/*
- * Switch the MPU rate if specified on cmdline. We cannot do this
- * early until cmdline is parsed. XXX This should be removed from the
- * clock code and handled by the OPP layer code in the near future.
- */
-static int __init omap3xxx_clk_arch_init(void)
-{
- int ret;
-
- if (!cpu_is_omap34xx())
- return 0;
-
- ret = omap2_clk_switch_mpurate_at_boot("dpll1_ck");
- if (!ret)
- omap2_clk_print_new_rates("osc_sys_ck", "core_ck", "arm_fck");
-
- return ret;
-}
-
-omap_arch_initcall(omap3xxx_clk_arch_init);
-
-
--
1.7.9.5
^ permalink raw reply related [flat|nested] 120+ messages in thread
* [PATCHv2 11/27] ARM: OMAP2+: clock: remove support for legacy mpurate command line param
@ 2015-05-11 8:54 ` Tero Kristo
0 siblings, 0 replies; 120+ messages in thread
From: Tero Kristo @ 2015-05-11 8:54 UTC (permalink / raw)
To: linux-arm-kernel
The legacy support is wrong and dangerous, as it doesn't take any
OPPs into account and does not scale voltages. Switching mpurate should
be handled through cpufreq.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
---
arch/arm/mach-omap2/Makefile | 2 +-
arch/arm/mach-omap2/clock.c | 41 ----------------------------
arch/arm/mach-omap2/clock.h | 1 -
arch/arm/mach-omap2/clock2xxx.c | 57 ---------------------------------------
arch/arm/mach-omap2/clock3xxx.c | 25 -----------------
5 files changed, 1 insertion(+), 125 deletions(-)
delete mode 100644 arch/arm/mach-omap2/clock2xxx.c
diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
index f33d011..bf5d71d 100644
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -181,7 +181,7 @@ obj-$(CONFIG_SOC_DRA7XX) += $(clockdomain-common)
obj-$(CONFIG_SOC_DRA7XX) += clockdomains7xx_data.o
# Clock framework
-obj-$(CONFIG_ARCH_OMAP2) += $(clock-common) clock2xxx.o
+obj-$(CONFIG_ARCH_OMAP2) += $(clock-common)
obj-$(CONFIG_ARCH_OMAP2) += clkt2xxx_dpllcore.o
obj-$(CONFIG_ARCH_OMAP2) += clkt2xxx_virt_prcm_set.o
obj-$(CONFIG_ARCH_OMAP2) += clkt2xxx_dpll.o
diff --git a/arch/arm/mach-omap2/clock.c b/arch/arm/mach-omap2/clock.c
index 234cedf..94a4949 100644
--- a/arch/arm/mach-omap2/clock.c
+++ b/arch/arm/mach-omap2/clock.c
@@ -582,47 +582,6 @@ const struct clk_hw_omap_ops clkhwops_wait = {
};
/**
- * omap2_clk_switch_mpurate_at_boot - switch ARM MPU rate by boot-time argument
- * @mpurate_ck_name: clk name of the clock to change rate
- *
- * Change the ARM MPU clock rate to the rate specified on the command
- * line, if one was specified. @mpurate_ck_name should be
- * "virt_prcm_set" on OMAP2xxx and "dpll1_ck" on OMAP34xx/OMAP36xx.
- * XXX Does not handle voltage scaling - on OMAP2xxx this is currently
- * handled by the virt_prcm_set clock, but this should be handled by
- * the OPP layer. XXX This is intended to be handled by the OPP layer
- * code in the near future and should be removed from the clock code.
- * Returns -EINVAL if 'mpurate' is zero or if clk_set_rate() rejects
- * the rate, -ENOENT if the struct clk referred to by @mpurate_ck_name
- * cannot be found, or 0 upon success.
- */
-int __init omap2_clk_switch_mpurate_at_boot(const char *mpurate_ck_name)
-{
- struct clk *mpurate_ck;
- int r;
-
- if (!mpurate)
- return -EINVAL;
-
- mpurate_ck = clk_get(NULL, mpurate_ck_name);
- if (WARN(IS_ERR(mpurate_ck), "Failed to get %s.\n", mpurate_ck_name))
- return -ENOENT;
-
- r = clk_set_rate(mpurate_ck, mpurate);
- if (r < 0) {
- WARN(1, "clock: %s: unable to set MPU rate to %d: %d\n",
- mpurate_ck_name, mpurate, r);
- clk_put(mpurate_ck);
- return -EINVAL;
- }
-
- calibrate_delay();
- clk_put(mpurate_ck);
-
- return 0;
-}
-
-/**
* omap2_clk_print_new_rates - print summary of current clock tree rates
* @hfclkin_ck_name: clk name for the off-chip HF oscillator
* @core_ck_name: clk name for the on-chip CORE_CLK
diff --git a/arch/arm/mach-omap2/clock.h b/arch/arm/mach-omap2/clock.h
index 950a17a..e2781b4 100644
--- a/arch/arm/mach-omap2/clock.h
+++ b/arch/arm/mach-omap2/clock.h
@@ -186,7 +186,6 @@ void omap3_dpll_deny_idle(struct clk_hw_omap *clk);
void __init omap2_clk_disable_clkdm_control(void);
-int omap2_clk_switch_mpurate_at_boot(const char *mpurate_ck_name);
void omap2_clk_print_new_rates(const char *hfclkin_ck_name,
const char *core_ck_name,
const char *mpu_ck_name);
diff --git a/arch/arm/mach-omap2/clock2xxx.c b/arch/arm/mach-omap2/clock2xxx.c
deleted file mode 100644
index b870f6a..0000000
--- a/arch/arm/mach-omap2/clock2xxx.c
+++ /dev/null
@@ -1,57 +0,0 @@
-/*
- * clock2xxx.c - OMAP2xxx-specific clock integration code
- *
- * Copyright (C) 2005-2008 Texas Instruments, Inc.
- * Copyright (C) 2004-2010 Nokia Corporation
- *
- * Contacts:
- * Richard Woodruff <r-woodruff2@ti.com>
- * Paul Walmsley
- *
- * Based on earlier work by Tuukka Tikkanen, Tony Lindgren,
- * Gordon McNutt and RidgeRun, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#undef DEBUG
-
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-
-#include "soc.h"
-#include "clock.h"
-#include "clock2xxx.h"
-#include "cm.h"
-#include "cm-regbits-24xx.h"
-
-struct clk_hw *dclk_hw;
-/*
- * Omap24xx specific clock functions
- */
-
-/*
- * Switch the MPU rate if specified on cmdline. We cannot do this
- * early until cmdline is parsed. XXX This should be removed from the
- * clock code and handled by the OPP layer code in the near future.
- */
-static int __init omap2xxx_clk_arch_init(void)
-{
- int ret;
-
- if (!cpu_is_omap24xx())
- return 0;
-
- ret = omap2_clk_switch_mpurate_at_boot("virt_prcm_set");
- if (!ret)
- omap2_clk_print_new_rates("sys_ck", "dpll_ck", "mpu_ck");
-
- return ret;
-}
-
-omap_arch_initcall(omap2xxx_clk_arch_init);
-
-
diff --git a/arch/arm/mach-omap2/clock3xxx.c b/arch/arm/mach-omap2/clock3xxx.c
index 8bede6a..4bd6122 100644
--- a/arch/arm/mach-omap2/clock3xxx.c
+++ b/arch/arm/mach-omap2/clock3xxx.c
@@ -108,28 +108,3 @@ void __init omap3_clk_lock_dpll5(void)
clk_disable_unprepare(dpll5_clk);
return;
}
-
-/* Common clock code */
-
-/*
- * Switch the MPU rate if specified on cmdline. We cannot do this
- * early until cmdline is parsed. XXX This should be removed from the
- * clock code and handled by the OPP layer code in the near future.
- */
-static int __init omap3xxx_clk_arch_init(void)
-{
- int ret;
-
- if (!cpu_is_omap34xx())
- return 0;
-
- ret = omap2_clk_switch_mpurate_at_boot("dpll1_ck");
- if (!ret)
- omap2_clk_print_new_rates("osc_sys_ck", "core_ck", "arm_fck");
-
- return ret;
-}
-
-omap_arch_initcall(omap3xxx_clk_arch_init);
-
-
--
1.7.9.5
^ permalink raw reply related [flat|nested] 120+ messages in thread
* [PATCHv2 12/27] ARM: OMAP2+: clock: add support for clkdm ops to the low level clk ops
2015-05-11 8:54 ` Tero Kristo
(?)
@ 2015-05-11 8:54 ` Tero Kristo
-1 siblings, 0 replies; 120+ messages in thread
From: Tero Kristo @ 2015-05-11 8:54 UTC (permalink / raw)
To: mturquette, tony, linux-omap, linux-clk, sboyd, paul; +Cc: linux-arm-kernel
Clock driver requires access to certain clockdomain handling ops once
the code is being moved over under clock driver. Example of this is
clk_enable / clk_disable under omap3 DPLL code. The required clkdm
APIs are now exported through the ti_clk_ll_ops struct.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
---
arch/arm/mach-omap2/clock.c | 2 ++
include/linux/clk/ti.h | 16 +++++++++++-----
2 files changed, 13 insertions(+), 5 deletions(-)
diff --git a/arch/arm/mach-omap2/clock.c b/arch/arm/mach-omap2/clock.c
index 94a4949..d6afc12 100644
--- a/arch/arm/mach-omap2/clock.c
+++ b/arch/arm/mach-omap2/clock.c
@@ -120,6 +120,8 @@ u32 omap2_clk_readl(struct clk_hw_omap *clk, void __iomem *reg)
static struct ti_clk_ll_ops omap_clk_ll_ops = {
.clk_readl = clk_memmap_readl,
.clk_writel = clk_memmap_writel,
+ .clkdm_clk_enable = clkdm_clk_enable,
+ .clkdm_clk_disable = clkdm_clk_disable,
};
/**
diff --git a/include/linux/clk/ti.h b/include/linux/clk/ti.h
index 43184c2..43b406c 100644
--- a/include/linux/clk/ti.h
+++ b/include/linux/clk/ti.h
@@ -238,18 +238,24 @@ struct clk_omap_reg {
};
/**
- * struct ti_clk_ll_ops - low-level register access ops for a clock
+ * struct ti_clk_ll_ops - low-level ops for clocks
* @clk_readl: pointer to register read function
* @clk_writel: pointer to register write function
+ * @clkdm_clk_enable: pointer to clockdomain enable function
+ * @clkdm_clk_disable: pointer to clockdomain disable function
*
- * Low-level register access ops are generally used by the basic clock types
- * (clk-gate, clk-mux, clk-divider etc.) to provide support for various
- * low-level hardware interfaces (direct MMIO, regmap etc.), but can also be
- * used by other hardware-specific clock drivers if needed.
+ * Low-level ops are generally used by the basic clock types (clk-gate,
+ * clk-mux, clk-divider etc.) to provide support for various low-level
+ * hadrware interfaces (direct MMIO, regmap etc.), and is initialized
+ * by board code. Low-level ops also contain some other platform specific
+ * operations not provided directly by clock drivers.
*/
struct ti_clk_ll_ops {
u32 (*clk_readl)(void __iomem *reg);
void (*clk_writel)(u32 val, void __iomem *reg);
+ int (*clkdm_clk_enable)(struct clockdomain *clkdm, struct clk *clk);
+ int (*clkdm_clk_disable)(struct clockdomain *clkdm,
+ struct clk *clk);
};
extern struct ti_clk_ll_ops *ti_clk_ll_ops;
--
1.7.9.5
^ permalink raw reply related [flat|nested] 120+ messages in thread
* [PATCHv2 12/27] ARM: OMAP2+: clock: add support for clkdm ops to the low level clk ops
@ 2015-05-11 8:54 ` Tero Kristo
0 siblings, 0 replies; 120+ messages in thread
From: Tero Kristo @ 2015-05-11 8:54 UTC (permalink / raw)
To: mturquette, tony, linux-omap, linux-clk, sboyd, paul; +Cc: linux-arm-kernel
Clock driver requires access to certain clockdomain handling ops once
the code is being moved over under clock driver. Example of this is
clk_enable / clk_disable under omap3 DPLL code. The required clkdm
APIs are now exported through the ti_clk_ll_ops struct.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
---
arch/arm/mach-omap2/clock.c | 2 ++
include/linux/clk/ti.h | 16 +++++++++++-----
2 files changed, 13 insertions(+), 5 deletions(-)
diff --git a/arch/arm/mach-omap2/clock.c b/arch/arm/mach-omap2/clock.c
index 94a4949..d6afc12 100644
--- a/arch/arm/mach-omap2/clock.c
+++ b/arch/arm/mach-omap2/clock.c
@@ -120,6 +120,8 @@ u32 omap2_clk_readl(struct clk_hw_omap *clk, void __iomem *reg)
static struct ti_clk_ll_ops omap_clk_ll_ops = {
.clk_readl = clk_memmap_readl,
.clk_writel = clk_memmap_writel,
+ .clkdm_clk_enable = clkdm_clk_enable,
+ .clkdm_clk_disable = clkdm_clk_disable,
};
/**
diff --git a/include/linux/clk/ti.h b/include/linux/clk/ti.h
index 43184c2..43b406c 100644
--- a/include/linux/clk/ti.h
+++ b/include/linux/clk/ti.h
@@ -238,18 +238,24 @@ struct clk_omap_reg {
};
/**
- * struct ti_clk_ll_ops - low-level register access ops for a clock
+ * struct ti_clk_ll_ops - low-level ops for clocks
* @clk_readl: pointer to register read function
* @clk_writel: pointer to register write function
+ * @clkdm_clk_enable: pointer to clockdomain enable function
+ * @clkdm_clk_disable: pointer to clockdomain disable function
*
- * Low-level register access ops are generally used by the basic clock types
- * (clk-gate, clk-mux, clk-divider etc.) to provide support for various
- * low-level hardware interfaces (direct MMIO, regmap etc.), but can also be
- * used by other hardware-specific clock drivers if needed.
+ * Low-level ops are generally used by the basic clock types (clk-gate,
+ * clk-mux, clk-divider etc.) to provide support for various low-level
+ * hadrware interfaces (direct MMIO, regmap etc.), and is initialized
+ * by board code. Low-level ops also contain some other platform specific
+ * operations not provided directly by clock drivers.
*/
struct ti_clk_ll_ops {
u32 (*clk_readl)(void __iomem *reg);
void (*clk_writel)(u32 val, void __iomem *reg);
+ int (*clkdm_clk_enable)(struct clockdomain *clkdm, struct clk *clk);
+ int (*clkdm_clk_disable)(struct clockdomain *clkdm,
+ struct clk *clk);
};
extern struct ti_clk_ll_ops *ti_clk_ll_ops;
--
1.7.9.5
^ permalink raw reply related [flat|nested] 120+ messages in thread
* [PATCHv2 12/27] ARM: OMAP2+: clock: add support for clkdm ops to the low level clk ops
@ 2015-05-11 8:54 ` Tero Kristo
0 siblings, 0 replies; 120+ messages in thread
From: Tero Kristo @ 2015-05-11 8:54 UTC (permalink / raw)
To: linux-arm-kernel
Clock driver requires access to certain clockdomain handling ops once
the code is being moved over under clock driver. Example of this is
clk_enable / clk_disable under omap3 DPLL code. The required clkdm
APIs are now exported through the ti_clk_ll_ops struct.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
---
arch/arm/mach-omap2/clock.c | 2 ++
include/linux/clk/ti.h | 16 +++++++++++-----
2 files changed, 13 insertions(+), 5 deletions(-)
diff --git a/arch/arm/mach-omap2/clock.c b/arch/arm/mach-omap2/clock.c
index 94a4949..d6afc12 100644
--- a/arch/arm/mach-omap2/clock.c
+++ b/arch/arm/mach-omap2/clock.c
@@ -120,6 +120,8 @@ u32 omap2_clk_readl(struct clk_hw_omap *clk, void __iomem *reg)
static struct ti_clk_ll_ops omap_clk_ll_ops = {
.clk_readl = clk_memmap_readl,
.clk_writel = clk_memmap_writel,
+ .clkdm_clk_enable = clkdm_clk_enable,
+ .clkdm_clk_disable = clkdm_clk_disable,
};
/**
diff --git a/include/linux/clk/ti.h b/include/linux/clk/ti.h
index 43184c2..43b406c 100644
--- a/include/linux/clk/ti.h
+++ b/include/linux/clk/ti.h
@@ -238,18 +238,24 @@ struct clk_omap_reg {
};
/**
- * struct ti_clk_ll_ops - low-level register access ops for a clock
+ * struct ti_clk_ll_ops - low-level ops for clocks
* @clk_readl: pointer to register read function
* @clk_writel: pointer to register write function
+ * @clkdm_clk_enable: pointer to clockdomain enable function
+ * @clkdm_clk_disable: pointer to clockdomain disable function
*
- * Low-level register access ops are generally used by the basic clock types
- * (clk-gate, clk-mux, clk-divider etc.) to provide support for various
- * low-level hardware interfaces (direct MMIO, regmap etc.), but can also be
- * used by other hardware-specific clock drivers if needed.
+ * Low-level ops are generally used by the basic clock types (clk-gate,
+ * clk-mux, clk-divider etc.) to provide support for various low-level
+ * hadrware interfaces (direct MMIO, regmap etc.), and is initialized
+ * by board code. Low-level ops also contain some other platform specific
+ * operations not provided directly by clock drivers.
*/
struct ti_clk_ll_ops {
u32 (*clk_readl)(void __iomem *reg);
void (*clk_writel)(u32 val, void __iomem *reg);
+ int (*clkdm_clk_enable)(struct clockdomain *clkdm, struct clk *clk);
+ int (*clkdm_clk_disable)(struct clockdomain *clkdm,
+ struct clk *clk);
};
extern struct ti_clk_ll_ops *ti_clk_ll_ops;
--
1.7.9.5
^ permalink raw reply related [flat|nested] 120+ messages in thread
* [PATCHv2 13/27] ARM: OMAP2+: clock: add support for specific CM ops to ti_clk_ll_ops
2015-05-11 8:54 ` Tero Kristo
(?)
@ 2015-05-11 8:54 ` Tero Kristo
-1 siblings, 0 replies; 120+ messages in thread
From: Tero Kristo @ 2015-05-11 8:54 UTC (permalink / raw)
To: mturquette, tony, linux-omap, linux-clk, sboyd, paul; +Cc: linux-arm-kernel
Clock driver requires access to some CM API functions once the code
is being moved under the clock driver from the platform directory.
Gate type clock requires access to cm_wait_module_ready and
cm_split_idlest_reg functions, which are both used for waiting until
the module being clocked has been successfully activated. These CM
APIs are now exported through the ti_clk_ll_ops struct.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
---
arch/arm/mach-omap2/clock.c | 2 ++
include/linux/clk/ti.h | 6 ++++++
2 files changed, 8 insertions(+)
diff --git a/arch/arm/mach-omap2/clock.c b/arch/arm/mach-omap2/clock.c
index d6afc12..7a5713d 100644
--- a/arch/arm/mach-omap2/clock.c
+++ b/arch/arm/mach-omap2/clock.c
@@ -122,6 +122,8 @@ static struct ti_clk_ll_ops omap_clk_ll_ops = {
.clk_writel = clk_memmap_writel,
.clkdm_clk_enable = clkdm_clk_enable,
.clkdm_clk_disable = clkdm_clk_disable,
+ .cm_wait_module_ready = omap_cm_wait_module_ready,
+ .cm_split_idlest_reg = cm_split_idlest_reg,
};
/**
diff --git a/include/linux/clk/ti.h b/include/linux/clk/ti.h
index 43b406c..3ca818e 100644
--- a/include/linux/clk/ti.h
+++ b/include/linux/clk/ti.h
@@ -243,6 +243,8 @@ struct clk_omap_reg {
* @clk_writel: pointer to register write function
* @clkdm_clk_enable: pointer to clockdomain enable function
* @clkdm_clk_disable: pointer to clockdomain disable function
+ * @cm_wait_module_ready: pointer to CM module wait ready function
+ * @cm_split_idlest_reg: pointer to CM module function to split idlest reg
*
* Low-level ops are generally used by the basic clock types (clk-gate,
* clk-mux, clk-divider etc.) to provide support for various low-level
@@ -256,6 +258,10 @@ struct ti_clk_ll_ops {
int (*clkdm_clk_enable)(struct clockdomain *clkdm, struct clk *clk);
int (*clkdm_clk_disable)(struct clockdomain *clkdm,
struct clk *clk);
+ int (*cm_wait_module_ready)(u8 part, s16 prcm_mod, u16 idlest_reg,
+ u8 idlest_shift);
+ int (*cm_split_idlest_reg)(void __iomem *idlest_reg, s16 *prcm_inst,
+ u8 *idlest_reg_id);
};
extern struct ti_clk_ll_ops *ti_clk_ll_ops;
--
1.7.9.5
^ permalink raw reply related [flat|nested] 120+ messages in thread
* [PATCHv2 13/27] ARM: OMAP2+: clock: add support for specific CM ops to ti_clk_ll_ops
@ 2015-05-11 8:54 ` Tero Kristo
0 siblings, 0 replies; 120+ messages in thread
From: Tero Kristo @ 2015-05-11 8:54 UTC (permalink / raw)
To: mturquette, tony, linux-omap, linux-clk, sboyd, paul; +Cc: linux-arm-kernel
Clock driver requires access to some CM API functions once the code
is being moved under the clock driver from the platform directory.
Gate type clock requires access to cm_wait_module_ready and
cm_split_idlest_reg functions, which are both used for waiting until
the module being clocked has been successfully activated. These CM
APIs are now exported through the ti_clk_ll_ops struct.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
---
arch/arm/mach-omap2/clock.c | 2 ++
include/linux/clk/ti.h | 6 ++++++
2 files changed, 8 insertions(+)
diff --git a/arch/arm/mach-omap2/clock.c b/arch/arm/mach-omap2/clock.c
index d6afc12..7a5713d 100644
--- a/arch/arm/mach-omap2/clock.c
+++ b/arch/arm/mach-omap2/clock.c
@@ -122,6 +122,8 @@ static struct ti_clk_ll_ops omap_clk_ll_ops = {
.clk_writel = clk_memmap_writel,
.clkdm_clk_enable = clkdm_clk_enable,
.clkdm_clk_disable = clkdm_clk_disable,
+ .cm_wait_module_ready = omap_cm_wait_module_ready,
+ .cm_split_idlest_reg = cm_split_idlest_reg,
};
/**
diff --git a/include/linux/clk/ti.h b/include/linux/clk/ti.h
index 43b406c..3ca818e 100644
--- a/include/linux/clk/ti.h
+++ b/include/linux/clk/ti.h
@@ -243,6 +243,8 @@ struct clk_omap_reg {
* @clk_writel: pointer to register write function
* @clkdm_clk_enable: pointer to clockdomain enable function
* @clkdm_clk_disable: pointer to clockdomain disable function
+ * @cm_wait_module_ready: pointer to CM module wait ready function
+ * @cm_split_idlest_reg: pointer to CM module function to split idlest reg
*
* Low-level ops are generally used by the basic clock types (clk-gate,
* clk-mux, clk-divider etc.) to provide support for various low-level
@@ -256,6 +258,10 @@ struct ti_clk_ll_ops {
int (*clkdm_clk_enable)(struct clockdomain *clkdm, struct clk *clk);
int (*clkdm_clk_disable)(struct clockdomain *clkdm,
struct clk *clk);
+ int (*cm_wait_module_ready)(u8 part, s16 prcm_mod, u16 idlest_reg,
+ u8 idlest_shift);
+ int (*cm_split_idlest_reg)(void __iomem *idlest_reg, s16 *prcm_inst,
+ u8 *idlest_reg_id);
};
extern struct ti_clk_ll_ops *ti_clk_ll_ops;
--
1.7.9.5
^ permalink raw reply related [flat|nested] 120+ messages in thread
* [PATCHv2 13/27] ARM: OMAP2+: clock: add support for specific CM ops to ti_clk_ll_ops
@ 2015-05-11 8:54 ` Tero Kristo
0 siblings, 0 replies; 120+ messages in thread
From: Tero Kristo @ 2015-05-11 8:54 UTC (permalink / raw)
To: linux-arm-kernel
Clock driver requires access to some CM API functions once the code
is being moved under the clock driver from the platform directory.
Gate type clock requires access to cm_wait_module_ready and
cm_split_idlest_reg functions, which are both used for waiting until
the module being clocked has been successfully activated. These CM
APIs are now exported through the ti_clk_ll_ops struct.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
---
arch/arm/mach-omap2/clock.c | 2 ++
include/linux/clk/ti.h | 6 ++++++
2 files changed, 8 insertions(+)
diff --git a/arch/arm/mach-omap2/clock.c b/arch/arm/mach-omap2/clock.c
index d6afc12..7a5713d 100644
--- a/arch/arm/mach-omap2/clock.c
+++ b/arch/arm/mach-omap2/clock.c
@@ -122,6 +122,8 @@ static struct ti_clk_ll_ops omap_clk_ll_ops = {
.clk_writel = clk_memmap_writel,
.clkdm_clk_enable = clkdm_clk_enable,
.clkdm_clk_disable = clkdm_clk_disable,
+ .cm_wait_module_ready = omap_cm_wait_module_ready,
+ .cm_split_idlest_reg = cm_split_idlest_reg,
};
/**
diff --git a/include/linux/clk/ti.h b/include/linux/clk/ti.h
index 43b406c..3ca818e 100644
--- a/include/linux/clk/ti.h
+++ b/include/linux/clk/ti.h
@@ -243,6 +243,8 @@ struct clk_omap_reg {
* @clk_writel: pointer to register write function
* @clkdm_clk_enable: pointer to clockdomain enable function
* @clkdm_clk_disable: pointer to clockdomain disable function
+ * @cm_wait_module_ready: pointer to CM module wait ready function
+ * @cm_split_idlest_reg: pointer to CM module function to split idlest reg
*
* Low-level ops are generally used by the basic clock types (clk-gate,
* clk-mux, clk-divider etc.) to provide support for various low-level
@@ -256,6 +258,10 @@ struct ti_clk_ll_ops {
int (*clkdm_clk_enable)(struct clockdomain *clkdm, struct clk *clk);
int (*clkdm_clk_disable)(struct clockdomain *clkdm,
struct clk *clk);
+ int (*cm_wait_module_ready)(u8 part, s16 prcm_mod, u16 idlest_reg,
+ u8 idlest_shift);
+ int (*cm_split_idlest_reg)(void __iomem *idlest_reg, s16 *prcm_inst,
+ u8 *idlest_reg_id);
};
extern struct ti_clk_ll_ops *ti_clk_ll_ops;
--
1.7.9.5
^ permalink raw reply related [flat|nested] 120+ messages in thread
* [PATCHv2 14/27] clk: ti: dpll: move omap3 DPLL functionality to clock driver
2015-05-11 8:54 ` Tero Kristo
(?)
@ 2015-05-11 8:54 ` Tero Kristo
-1 siblings, 0 replies; 120+ messages in thread
From: Tero Kristo @ 2015-05-11 8:54 UTC (permalink / raw)
To: mturquette, tony, linux-omap, linux-clk, sboyd, paul; +Cc: linux-arm-kernel
With the legacy clock support gone, OMAP3 generic DPLL code can now be
moved over to the clock driver also. A few un-unused clkoutx2 functions
are also removed at the same time.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
---
arch/arm/mach-omap2/Makefile | 8 +-
arch/arm/mach-omap2/clock.h | 4 -
arch/arm/mach-omap2/clock3xxx.c | 77 ----
arch/arm/mach-omap2/dpll3xxx.c | 818 --------------------------------------
drivers/clk/ti/Makefile | 2 +-
drivers/clk/ti/clk-3xxx.c | 31 ++
drivers/clk/ti/clock.h | 27 ++
drivers/clk/ti/dpll3xxx.c | 825 +++++++++++++++++++++++++++++++++++++++
include/linux/clk/ti.h | 30 --
9 files changed, 886 insertions(+), 936 deletions(-)
delete mode 100644 arch/arm/mach-omap2/dpll3xxx.c
create mode 100644 drivers/clk/ti/dpll3xxx.c
diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
index bf5d71d..f9d4ccf 100644
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -189,15 +189,11 @@ obj-$(CONFIG_SOC_OMAP2430) += clock2430.o
obj-$(CONFIG_ARCH_OMAP3) += $(clock-common) clock3xxx.o
obj-$(CONFIG_ARCH_OMAP3) += clock34xx.o clkt34xx_dpll3m2.o
obj-$(CONFIG_ARCH_OMAP3) += clock3517.o
-obj-$(CONFIG_ARCH_OMAP3) += dpll3xxx.o
obj-$(CONFIG_ARCH_OMAP4) += $(clock-common)
-obj-$(CONFIG_ARCH_OMAP4) += dpll3xxx.o
-obj-$(CONFIG_SOC_AM33XX) += $(clock-common) dpll3xxx.o
+obj-$(CONFIG_SOC_AM33XX) += $(clock-common)
obj-$(CONFIG_SOC_OMAP5) += $(clock-common)
-obj-$(CONFIG_SOC_OMAP5) += dpll3xxx.o
obj-$(CONFIG_SOC_DRA7XX) += $(clock-common)
-obj-$(CONFIG_SOC_DRA7XX) += dpll3xxx.o
-obj-$(CONFIG_SOC_AM43XX) += $(clock-common) dpll3xxx.o
+obj-$(CONFIG_SOC_AM43XX) += $(clock-common)
# OMAP2 clock rate set data (old "OPP" data)
obj-$(CONFIG_SOC_OMAP2420) += opp2420_data.o
diff --git a/arch/arm/mach-omap2/clock.h b/arch/arm/mach-omap2/clock.h
index e2781b4..d60691d 100644
--- a/arch/arm/mach-omap2/clock.h
+++ b/arch/arm/mach-omap2/clock.h
@@ -180,10 +180,6 @@ struct clksel {
#define OMAP4XXX_EN_DPLL_FRBYPASS 0x6
#define OMAP4XXX_EN_DPLL_LOCKED 0x7
-u32 omap3_dpll_autoidle_read(struct clk_hw_omap *clk);
-void omap3_dpll_allow_idle(struct clk_hw_omap *clk);
-void omap3_dpll_deny_idle(struct clk_hw_omap *clk);
-
void __init omap2_clk_disable_clkdm_control(void);
void omap2_clk_print_new_rates(const char *hfclkin_ck_name,
diff --git a/arch/arm/mach-omap2/clock3xxx.c b/arch/arm/mach-omap2/clock3xxx.c
index 4bd6122..0b0e3a87 100644
--- a/arch/arm/mach-omap2/clock3xxx.c
+++ b/arch/arm/mach-omap2/clock3xxx.c
@@ -29,82 +29,5 @@
#include "cm2xxx_3xxx.h"
#include "cm-regbits-34xx.h"
-/*
- * DPLL5_FREQ_FOR_USBHOST: USBHOST and USBTLL are the only clocks
- * that are sourced by DPLL5, and both of these require this clock
- * to be at 120 MHz for proper operation.
- */
-#define DPLL5_FREQ_FOR_USBHOST 120000000
-
/* needed by omap3_core_dpll_m2_set_rate() */
struct clk *sdrc_ick_p, *arm_fck_p;
-
-/**
- * omap3_dpll4_set_rate - set rate for omap3 per-dpll
- * @hw: clock to change
- * @rate: target rate for clock
- * @parent_rate: rate of the parent clock
- *
- * Check if the current SoC supports the per-dpll reprogram operation
- * or not, and then do the rate change if supported. Returns -EINVAL
- * if not supported, 0 for success, and potential error codes from the
- * clock rate change.
- */
-int omap3_dpll4_set_rate(struct clk_hw *hw, unsigned long rate,
- unsigned long parent_rate)
-{
- /*
- * According to the 12-5 CDP code from TI, "Limitation 2.5"
- * on 3430ES1 prevents us from changing DPLL multipliers or dividers
- * on DPLL4.
- */
- if (ti_clk_get_features()->flags & TI_CLK_DPLL4_DENY_REPROGRAM) {
- pr_err("clock: DPLL4 cannot change rate due to silicon 'Limitation 2.5' on 3430ES1.\n");
- return -EINVAL;
- }
-
- return omap3_noncore_dpll_set_rate(hw, rate, parent_rate);
-}
-
-/**
- * omap3_dpll4_set_rate_and_parent - set rate and parent for omap3 per-dpll
- * @hw: clock to change
- * @rate: target rate for clock
- * @parent_rate: rate of the parent clock
- * @index: parent index, 0 - reference clock, 1 - bypass clock
- *
- * Check if the current SoC support the per-dpll reprogram operation
- * or not, and then do the rate + parent change if supported. Returns
- * -EINVAL if not supported, 0 for success, and potential error codes
- * from the clock rate change.
- */
-int omap3_dpll4_set_rate_and_parent(struct clk_hw *hw, unsigned long rate,
- unsigned long parent_rate, u8 index)
-{
- if (ti_clk_get_features()->flags & TI_CLK_DPLL4_DENY_REPROGRAM) {
- pr_err("clock: DPLL4 cannot change rate due to silicon 'Limitation 2.5' on 3430ES1.\n");
- return -EINVAL;
- }
-
- return omap3_noncore_dpll_set_rate_and_parent(hw, rate, parent_rate,
- index);
-}
-
-void __init omap3_clk_lock_dpll5(void)
-{
- struct clk *dpll5_clk;
- struct clk *dpll5_m2_clk;
-
- dpll5_clk = clk_get(NULL, "dpll5_ck");
- clk_set_rate(dpll5_clk, DPLL5_FREQ_FOR_USBHOST);
- clk_prepare_enable(dpll5_clk);
-
- /* Program dpll5_m2_clk divider for no division */
- dpll5_m2_clk = clk_get(NULL, "dpll5_m2_ck");
- clk_prepare_enable(dpll5_m2_clk);
- clk_set_rate(dpll5_m2_clk, DPLL5_FREQ_FOR_USBHOST);
-
- clk_disable_unprepare(dpll5_m2_clk);
- clk_disable_unprepare(dpll5_clk);
- return;
-}
diff --git a/arch/arm/mach-omap2/dpll3xxx.c b/arch/arm/mach-omap2/dpll3xxx.c
deleted file mode 100644
index 9a80f59..0000000
--- a/arch/arm/mach-omap2/dpll3xxx.c
+++ /dev/null
@@ -1,818 +0,0 @@
-/*
- * OMAP3/4 - specific DPLL control functions
- *
- * Copyright (C) 2009-2010 Texas Instruments, Inc.
- * Copyright (C) 2009-2010 Nokia Corporation
- *
- * Written by Paul Walmsley
- * Testing and integration fixes by Jouni Högander
- *
- * 36xx support added by Vishwanath BS, Richard Woodruff, and Nishanth
- * Menon
- *
- * Parts of this code are based on code written by
- * Richard Woodruff, Tony Lindgren, Tuukka Tikkanen, Karthik Dasu
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/device.h>
-#include <linux/list.h>
-#include <linux/errno.h>
-#include <linux/delay.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-#include <linux/bitops.h>
-#include <linux/clkdev.h>
-
-#include "clockdomain.h"
-#include "clock.h"
-
-/* CM_AUTOIDLE_PLL*.AUTO_* bit values */
-#define DPLL_AUTOIDLE_DISABLE 0x0
-#define DPLL_AUTOIDLE_LOW_POWER_STOP 0x1
-
-#define MAX_DPLL_WAIT_TRIES 1000000
-
-/* Private functions */
-
-/* _omap3_dpll_write_clken - write clken_bits arg to a DPLL's enable bits */
-static void _omap3_dpll_write_clken(struct clk_hw_omap *clk, u8 clken_bits)
-{
- const struct dpll_data *dd;
- u32 v;
-
- dd = clk->dpll_data;
-
- v = omap2_clk_readl(clk, dd->control_reg);
- v &= ~dd->enable_mask;
- v |= clken_bits << __ffs(dd->enable_mask);
- omap2_clk_writel(v, clk, dd->control_reg);
-}
-
-/* _omap3_wait_dpll_status: wait for a DPLL to enter a specific state */
-static int _omap3_wait_dpll_status(struct clk_hw_omap *clk, u8 state)
-{
- const struct dpll_data *dd;
- int i = 0;
- int ret = -EINVAL;
- const char *clk_name;
-
- dd = clk->dpll_data;
- clk_name = __clk_get_name(clk->hw.clk);
-
- state <<= __ffs(dd->idlest_mask);
-
- while (((omap2_clk_readl(clk, dd->idlest_reg) & dd->idlest_mask)
- != state) && i < MAX_DPLL_WAIT_TRIES) {
- i++;
- udelay(1);
- }
-
- if (i == MAX_DPLL_WAIT_TRIES) {
- printk(KERN_ERR "clock: %s failed transition to '%s'\n",
- clk_name, (state) ? "locked" : "bypassed");
- } else {
- pr_debug("clock: %s transition to '%s' in %d loops\n",
- clk_name, (state) ? "locked" : "bypassed", i);
-
- ret = 0;
- }
-
- return ret;
-}
-
-/* From 3430 TRM ES2 4.7.6.2 */
-static u16 _omap3_dpll_compute_freqsel(struct clk_hw_omap *clk, u8 n)
-{
- unsigned long fint;
- u16 f = 0;
-
- fint = __clk_get_rate(clk->dpll_data->clk_ref) / n;
-
- pr_debug("clock: fint is %lu\n", fint);
-
- if (fint >= 750000 && fint <= 1000000)
- f = 0x3;
- else if (fint > 1000000 && fint <= 1250000)
- f = 0x4;
- else if (fint > 1250000 && fint <= 1500000)
- f = 0x5;
- else if (fint > 1500000 && fint <= 1750000)
- f = 0x6;
- else if (fint > 1750000 && fint <= 2100000)
- f = 0x7;
- else if (fint > 7500000 && fint <= 10000000)
- f = 0xB;
- else if (fint > 10000000 && fint <= 12500000)
- f = 0xC;
- else if (fint > 12500000 && fint <= 15000000)
- f = 0xD;
- else if (fint > 15000000 && fint <= 17500000)
- f = 0xE;
- else if (fint > 17500000 && fint <= 21000000)
- f = 0xF;
- else
- pr_debug("clock: unknown freqsel setting for %d\n", n);
-
- return f;
-}
-
-/*
- * _omap3_noncore_dpll_lock - instruct a DPLL to lock and wait for readiness
- * @clk: pointer to a DPLL struct clk
- *
- * Instructs a non-CORE DPLL to lock. Waits for the DPLL to report
- * readiness before returning. Will save and restore the DPLL's
- * autoidle state across the enable, per the CDP code. If the DPLL
- * locked successfully, return 0; if the DPLL did not lock in the time
- * allotted, or DPLL3 was passed in, return -EINVAL.
- */
-static int _omap3_noncore_dpll_lock(struct clk_hw_omap *clk)
-{
- const struct dpll_data *dd;
- u8 ai;
- u8 state = 1;
- int r = 0;
-
- pr_debug("clock: locking DPLL %s\n", __clk_get_name(clk->hw.clk));
-
- dd = clk->dpll_data;
- state <<= __ffs(dd->idlest_mask);
-
- /* Check if already locked */
- if ((omap2_clk_readl(clk, dd->idlest_reg) & dd->idlest_mask) == state)
- goto done;
-
- ai = omap3_dpll_autoidle_read(clk);
-
- if (ai)
- omap3_dpll_deny_idle(clk);
-
- _omap3_dpll_write_clken(clk, DPLL_LOCKED);
-
- r = _omap3_wait_dpll_status(clk, 1);
-
- if (ai)
- omap3_dpll_allow_idle(clk);
-
-done:
- return r;
-}
-
-/*
- * _omap3_noncore_dpll_bypass - instruct a DPLL to bypass and wait for readiness
- * @clk: pointer to a DPLL struct clk
- *
- * Instructs a non-CORE DPLL to enter low-power bypass mode. In
- * bypass mode, the DPLL's rate is set equal to its parent clock's
- * rate. Waits for the DPLL to report readiness before returning.
- * Will save and restore the DPLL's autoidle state across the enable,
- * per the CDP code. If the DPLL entered bypass mode successfully,
- * return 0; if the DPLL did not enter bypass in the time allotted, or
- * DPLL3 was passed in, or the DPLL does not support low-power bypass,
- * return -EINVAL.
- */
-static int _omap3_noncore_dpll_bypass(struct clk_hw_omap *clk)
-{
- int r;
- u8 ai;
-
- if (!(clk->dpll_data->modes & (1 << DPLL_LOW_POWER_BYPASS)))
- return -EINVAL;
-
- pr_debug("clock: configuring DPLL %s for low-power bypass\n",
- __clk_get_name(clk->hw.clk));
-
- ai = omap3_dpll_autoidle_read(clk);
-
- _omap3_dpll_write_clken(clk, DPLL_LOW_POWER_BYPASS);
-
- r = _omap3_wait_dpll_status(clk, 0);
-
- if (ai)
- omap3_dpll_allow_idle(clk);
-
- return r;
-}
-
-/*
- * _omap3_noncore_dpll_stop - instruct a DPLL to stop
- * @clk: pointer to a DPLL struct clk
- *
- * Instructs a non-CORE DPLL to enter low-power stop. Will save and
- * restore the DPLL's autoidle state across the stop, per the CDP
- * code. If DPLL3 was passed in, or the DPLL does not support
- * low-power stop, return -EINVAL; otherwise, return 0.
- */
-static int _omap3_noncore_dpll_stop(struct clk_hw_omap *clk)
-{
- u8 ai;
-
- if (!(clk->dpll_data->modes & (1 << DPLL_LOW_POWER_STOP)))
- return -EINVAL;
-
- pr_debug("clock: stopping DPLL %s\n", __clk_get_name(clk->hw.clk));
-
- ai = omap3_dpll_autoidle_read(clk);
-
- _omap3_dpll_write_clken(clk, DPLL_LOW_POWER_STOP);
-
- if (ai)
- omap3_dpll_allow_idle(clk);
-
- return 0;
-}
-
-/**
- * _lookup_dco - Lookup DCO used by j-type DPLL
- * @clk: pointer to a DPLL struct clk
- * @dco: digital control oscillator selector
- * @m: DPLL multiplier to set
- * @n: DPLL divider to set
- *
- * See 36xx TRM section 3.5.3.3.3.2 "Type B DPLL (Low-Jitter)"
- *
- * XXX This code is not needed for 3430/AM35xx; can it be optimized
- * out in non-multi-OMAP builds for those chips?
- */
-static void _lookup_dco(struct clk_hw_omap *clk, u8 *dco, u16 m, u8 n)
-{
- unsigned long fint, clkinp; /* watch out for overflow */
-
- clkinp = __clk_get_rate(__clk_get_parent(clk->hw.clk));
- fint = (clkinp / n) * m;
-
- if (fint < 1000000000)
- *dco = 2;
- else
- *dco = 4;
-}
-
-/**
- * _lookup_sddiv - Calculate sigma delta divider for j-type DPLL
- * @clk: pointer to a DPLL struct clk
- * @sd_div: target sigma-delta divider
- * @m: DPLL multiplier to set
- * @n: DPLL divider to set
- *
- * See 36xx TRM section 3.5.3.3.3.2 "Type B DPLL (Low-Jitter)"
- *
- * XXX This code is not needed for 3430/AM35xx; can it be optimized
- * out in non-multi-OMAP builds for those chips?
- */
-static void _lookup_sddiv(struct clk_hw_omap *clk, u8 *sd_div, u16 m, u8 n)
-{
- unsigned long clkinp, sd; /* watch out for overflow */
- int mod1, mod2;
-
- clkinp = __clk_get_rate(__clk_get_parent(clk->hw.clk));
-
- /*
- * target sigma-delta to near 250MHz
- * sd = ceil[(m/(n+1)) * (clkinp_MHz / 250)]
- */
- clkinp /= 100000; /* shift from MHz to 10*Hz for 38.4 and 19.2 */
- mod1 = (clkinp * m) % (250 * n);
- sd = (clkinp * m) / (250 * n);
- mod2 = sd % 10;
- sd /= 10;
-
- if (mod1 || mod2)
- sd++;
- *sd_div = sd;
-}
-
-/*
- * _omap3_noncore_dpll_program - set non-core DPLL M,N values directly
- * @clk: struct clk * of DPLL to set
- * @freqsel: FREQSEL value to set
- *
- * Program the DPLL with the last M, N values calculated, and wait for
- * the DPLL to lock. Returns -EINVAL upon error, or 0 upon success.
- */
-static int omap3_noncore_dpll_program(struct clk_hw_omap *clk, u16 freqsel)
-{
- struct dpll_data *dd = clk->dpll_data;
- u8 dco, sd_div;
- u32 v;
-
- /* 3430 ES2 TRM: 4.7.6.9 DPLL Programming Sequence */
- _omap3_noncore_dpll_bypass(clk);
-
- /*
- * Set jitter correction. Jitter correction applicable for OMAP343X
- * only since freqsel field is no longer present on other devices.
- */
- if (ti_clk_get_features()->flags & TI_CLK_DPLL_HAS_FREQSEL) {
- v = omap2_clk_readl(clk, dd->control_reg);
- v &= ~dd->freqsel_mask;
- v |= freqsel << __ffs(dd->freqsel_mask);
- omap2_clk_writel(v, clk, dd->control_reg);
- }
-
- /* Set DPLL multiplier, divider */
- v = omap2_clk_readl(clk, dd->mult_div1_reg);
-
- /* Handle Duty Cycle Correction */
- if (dd->dcc_mask) {
- if (dd->last_rounded_rate >= dd->dcc_rate)
- v |= dd->dcc_mask; /* Enable DCC */
- else
- v &= ~dd->dcc_mask; /* Disable DCC */
- }
-
- v &= ~(dd->mult_mask | dd->div1_mask);
- v |= dd->last_rounded_m << __ffs(dd->mult_mask);
- v |= (dd->last_rounded_n - 1) << __ffs(dd->div1_mask);
-
- /* Configure dco and sd_div for dplls that have these fields */
- if (dd->dco_mask) {
- _lookup_dco(clk, &dco, dd->last_rounded_m, dd->last_rounded_n);
- v &= ~(dd->dco_mask);
- v |= dco << __ffs(dd->dco_mask);
- }
- if (dd->sddiv_mask) {
- _lookup_sddiv(clk, &sd_div, dd->last_rounded_m,
- dd->last_rounded_n);
- v &= ~(dd->sddiv_mask);
- v |= sd_div << __ffs(dd->sddiv_mask);
- }
-
- omap2_clk_writel(v, clk, dd->mult_div1_reg);
-
- /* Set 4X multiplier and low-power mode */
- if (dd->m4xen_mask || dd->lpmode_mask) {
- v = omap2_clk_readl(clk, dd->control_reg);
-
- if (dd->m4xen_mask) {
- if (dd->last_rounded_m4xen)
- v |= dd->m4xen_mask;
- else
- v &= ~dd->m4xen_mask;
- }
-
- if (dd->lpmode_mask) {
- if (dd->last_rounded_lpmode)
- v |= dd->lpmode_mask;
- else
- v &= ~dd->lpmode_mask;
- }
-
- omap2_clk_writel(v, clk, dd->control_reg);
- }
-
- /* We let the clock framework set the other output dividers later */
-
- /* REVISIT: Set ramp-up delay? */
-
- _omap3_noncore_dpll_lock(clk);
-
- return 0;
-}
-
-/* Public functions */
-
-/**
- * omap3_dpll_recalc - recalculate DPLL rate
- * @clk: DPLL struct clk
- *
- * Recalculate and propagate the DPLL rate.
- */
-unsigned long omap3_dpll_recalc(struct clk_hw *hw, unsigned long parent_rate)
-{
- struct clk_hw_omap *clk = to_clk_hw_omap(hw);
-
- return omap2_get_dpll_rate(clk);
-}
-
-/* Non-CORE DPLL (e.g., DPLLs that do not control SDRC) clock functions */
-
-/**
- * omap3_noncore_dpll_enable - instruct a DPLL to enter bypass or lock mode
- * @clk: pointer to a DPLL struct clk
- *
- * Instructs a non-CORE DPLL to enable, e.g., to enter bypass or lock.
- * The choice of modes depends on the DPLL's programmed rate: if it is
- * the same as the DPLL's parent clock, it will enter bypass;
- * otherwise, it will enter lock. This code will wait for the DPLL to
- * indicate readiness before returning, unless the DPLL takes too long
- * to enter the target state. Intended to be used as the struct clk's
- * enable function. If DPLL3 was passed in, or the DPLL does not
- * support low-power stop, or if the DPLL took too long to enter
- * bypass or lock, return -EINVAL; otherwise, return 0.
- */
-int omap3_noncore_dpll_enable(struct clk_hw *hw)
-{
- struct clk_hw_omap *clk = to_clk_hw_omap(hw);
- int r;
- struct dpll_data *dd;
- struct clk_hw *parent;
-
- dd = clk->dpll_data;
- if (!dd)
- return -EINVAL;
-
- if (clk->clkdm) {
- r = clkdm_clk_enable(clk->clkdm, hw->clk);
- if (r) {
- WARN(1,
- "%s: could not enable %s's clockdomain %s: %d\n",
- __func__, __clk_get_name(hw->clk),
- clk->clkdm->name, r);
- return r;
- }
- }
-
- parent = __clk_get_hw(__clk_get_parent(hw->clk));
-
- if (__clk_get_rate(hw->clk) == __clk_get_rate(dd->clk_bypass)) {
- WARN_ON(parent != __clk_get_hw(dd->clk_bypass));
- r = _omap3_noncore_dpll_bypass(clk);
- } else {
- WARN_ON(parent != __clk_get_hw(dd->clk_ref));
- r = _omap3_noncore_dpll_lock(clk);
- }
-
- return r;
-}
-
-/**
- * omap3_noncore_dpll_disable - instruct a DPLL to enter low-power stop
- * @clk: pointer to a DPLL struct clk
- *
- * Instructs a non-CORE DPLL to enter low-power stop. This function is
- * intended for use in struct clkops. No return value.
- */
-void omap3_noncore_dpll_disable(struct clk_hw *hw)
-{
- struct clk_hw_omap *clk = to_clk_hw_omap(hw);
-
- _omap3_noncore_dpll_stop(clk);
- if (clk->clkdm)
- clkdm_clk_disable(clk->clkdm, hw->clk);
-}
-
-
-/* Non-CORE DPLL rate set code */
-
-/**
- * omap3_noncore_dpll_determine_rate - determine rate for a DPLL
- * @hw: pointer to the clock to determine rate for
- * @rate: target rate for the DPLL
- * @best_parent_rate: pointer for returning best parent rate
- * @best_parent_clk: pointer for returning best parent clock
- *
- * Determines which DPLL mode to use for reaching a desired target rate.
- * Checks whether the DPLL shall be in bypass or locked mode, and if
- * locked, calculates the M,N values for the DPLL via round-rate.
- * Returns a positive clock rate with success, negative error value
- * in failure.
- */
-long omap3_noncore_dpll_determine_rate(struct clk_hw *hw, unsigned long rate,
- unsigned long min_rate,
- unsigned long max_rate,
- unsigned long *best_parent_rate,
- struct clk_hw **best_parent_clk)
-{
- struct clk_hw_omap *clk = to_clk_hw_omap(hw);
- struct dpll_data *dd;
-
- if (!hw || !rate)
- return -EINVAL;
-
- dd = clk->dpll_data;
- if (!dd)
- return -EINVAL;
-
- if (__clk_get_rate(dd->clk_bypass) == rate &&
- (dd->modes & (1 << DPLL_LOW_POWER_BYPASS))) {
- *best_parent_clk = __clk_get_hw(dd->clk_bypass);
- } else {
- rate = omap2_dpll_round_rate(hw, rate, best_parent_rate);
- *best_parent_clk = __clk_get_hw(dd->clk_ref);
- }
-
- *best_parent_rate = rate;
-
- return rate;
-}
-
-/**
- * omap3_noncore_dpll_set_parent - set parent for a DPLL clock
- * @hw: pointer to the clock to set parent for
- * @index: parent index to select
- *
- * Sets parent for a DPLL clock. This sets the DPLL into bypass or
- * locked mode. Returns 0 with success, negative error value otherwise.
- */
-int omap3_noncore_dpll_set_parent(struct clk_hw *hw, u8 index)
-{
- struct clk_hw_omap *clk = to_clk_hw_omap(hw);
- int ret;
-
- if (!hw)
- return -EINVAL;
-
- if (index)
- ret = _omap3_noncore_dpll_bypass(clk);
- else
- ret = _omap3_noncore_dpll_lock(clk);
-
- return ret;
-}
-
-/**
- * omap3_noncore_dpll_set_rate - set rate for a DPLL clock
- * @hw: pointer to the clock to set parent for
- * @rate: target rate for the clock
- * @parent_rate: rate of the parent clock
- *
- * Sets rate for a DPLL clock. First checks if the clock parent is
- * reference clock (in bypass mode, the rate of the clock can't be
- * changed) and proceeds with the rate change operation. Returns 0
- * with success, negative error value otherwise.
- */
-int omap3_noncore_dpll_set_rate(struct clk_hw *hw, unsigned long rate,
- unsigned long parent_rate)
-{
- struct clk_hw_omap *clk = to_clk_hw_omap(hw);
- struct dpll_data *dd;
- u16 freqsel = 0;
- int ret;
-
- if (!hw || !rate)
- return -EINVAL;
-
- dd = clk->dpll_data;
- if (!dd)
- return -EINVAL;
-
- if (__clk_get_hw(__clk_get_parent(hw->clk)) !=
- __clk_get_hw(dd->clk_ref))
- return -EINVAL;
-
- if (dd->last_rounded_rate == 0)
- return -EINVAL;
-
- /* Freqsel is available only on OMAP343X devices */
- if (ti_clk_get_features()->flags & TI_CLK_DPLL_HAS_FREQSEL) {
- freqsel = _omap3_dpll_compute_freqsel(clk, dd->last_rounded_n);
- WARN_ON(!freqsel);
- }
-
- pr_debug("%s: %s: set rate: locking rate to %lu.\n", __func__,
- __clk_get_name(hw->clk), rate);
-
- ret = omap3_noncore_dpll_program(clk, freqsel);
-
- return ret;
-}
-
-/**
- * omap3_noncore_dpll_set_rate_and_parent - set rate and parent for a DPLL clock
- * @hw: pointer to the clock to set rate and parent for
- * @rate: target rate for the DPLL
- * @parent_rate: clock rate of the DPLL parent
- * @index: new parent index for the DPLL, 0 - reference, 1 - bypass
- *
- * Sets rate and parent for a DPLL clock. If new parent is the bypass
- * clock, only selects the parent. Otherwise proceeds with a rate
- * change, as this will effectively also change the parent as the
- * DPLL is put into locked mode. Returns 0 with success, negative error
- * value otherwise.
- */
-int omap3_noncore_dpll_set_rate_and_parent(struct clk_hw *hw,
- unsigned long rate,
- unsigned long parent_rate,
- u8 index)
-{
- int ret;
-
- if (!hw || !rate)
- return -EINVAL;
-
- /*
- * clk-ref at index[0], in which case we only need to set rate,
- * the parent will be changed automatically with the lock sequence.
- * With clk-bypass case we only need to change parent.
- */
- if (index)
- ret = omap3_noncore_dpll_set_parent(hw, index);
- else
- ret = omap3_noncore_dpll_set_rate(hw, rate, parent_rate);
-
- return ret;
-}
-
-/* DPLL autoidle read/set code */
-
-/**
- * omap3_dpll_autoidle_read - read a DPLL's autoidle bits
- * @clk: struct clk * of the DPLL to read
- *
- * Return the DPLL's autoidle bits, shifted down to bit 0. Returns
- * -EINVAL if passed a null pointer or if the struct clk does not
- * appear to refer to a DPLL.
- */
-u32 omap3_dpll_autoidle_read(struct clk_hw_omap *clk)
-{
- const struct dpll_data *dd;
- u32 v;
-
- if (!clk || !clk->dpll_data)
- return -EINVAL;
-
- dd = clk->dpll_data;
-
- if (!dd->autoidle_reg)
- return -EINVAL;
-
- v = omap2_clk_readl(clk, dd->autoidle_reg);
- v &= dd->autoidle_mask;
- v >>= __ffs(dd->autoidle_mask);
-
- return v;
-}
-
-/**
- * omap3_dpll_allow_idle - enable DPLL autoidle bits
- * @clk: struct clk * of the DPLL to operate on
- *
- * Enable DPLL automatic idle control. This automatic idle mode
- * switching takes effect only when the DPLL is locked, at least on
- * OMAP3430. The DPLL will enter low-power stop when its downstream
- * clocks are gated. No return value.
- */
-void omap3_dpll_allow_idle(struct clk_hw_omap *clk)
-{
- const struct dpll_data *dd;
- u32 v;
-
- if (!clk || !clk->dpll_data)
- return;
-
- dd = clk->dpll_data;
-
- if (!dd->autoidle_reg)
- return;
-
- /*
- * REVISIT: CORE DPLL can optionally enter low-power bypass
- * by writing 0x5 instead of 0x1. Add some mechanism to
- * optionally enter this mode.
- */
- v = omap2_clk_readl(clk, dd->autoidle_reg);
- v &= ~dd->autoidle_mask;
- v |= DPLL_AUTOIDLE_LOW_POWER_STOP << __ffs(dd->autoidle_mask);
- omap2_clk_writel(v, clk, dd->autoidle_reg);
-
-}
-
-/**
- * omap3_dpll_deny_idle - prevent DPLL from automatically idling
- * @clk: struct clk * of the DPLL to operate on
- *
- * Disable DPLL automatic idle control. No return value.
- */
-void omap3_dpll_deny_idle(struct clk_hw_omap *clk)
-{
- const struct dpll_data *dd;
- u32 v;
-
- if (!clk || !clk->dpll_data)
- return;
-
- dd = clk->dpll_data;
-
- if (!dd->autoidle_reg)
- return;
-
- v = omap2_clk_readl(clk, dd->autoidle_reg);
- v &= ~dd->autoidle_mask;
- v |= DPLL_AUTOIDLE_DISABLE << __ffs(dd->autoidle_mask);
- omap2_clk_writel(v, clk, dd->autoidle_reg);
-
-}
-
-/* Clock control for DPLL outputs */
-
-/* Find the parent DPLL for the given clkoutx2 clock */
-static struct clk_hw_omap *omap3_find_clkoutx2_dpll(struct clk_hw *hw)
-{
- struct clk_hw_omap *pclk = NULL;
- struct clk *parent;
-
- /* Walk up the parents of clk, looking for a DPLL */
- do {
- do {
- parent = __clk_get_parent(hw->clk);
- hw = __clk_get_hw(parent);
- } while (hw && (__clk_get_flags(hw->clk) & CLK_IS_BASIC));
- if (!hw)
- break;
- pclk = to_clk_hw_omap(hw);
- } while (pclk && !pclk->dpll_data);
-
- /* clk does not have a DPLL as a parent? error in the clock data */
- if (!pclk) {
- WARN_ON(1);
- return NULL;
- }
-
- return pclk;
-}
-
-/**
- * omap3_clkoutx2_recalc - recalculate DPLL X2 output virtual clock rate
- * @clk: DPLL output struct clk
- *
- * Using parent clock DPLL data, look up DPLL state. If locked, set our
- * rate to the dpll_clk * 2; otherwise, just use dpll_clk.
- */
-unsigned long omap3_clkoutx2_recalc(struct clk_hw *hw,
- unsigned long parent_rate)
-{
- const struct dpll_data *dd;
- unsigned long rate;
- u32 v;
- struct clk_hw_omap *pclk = NULL;
-
- if (!parent_rate)
- return 0;
-
- pclk = omap3_find_clkoutx2_dpll(hw);
-
- if (!pclk)
- return 0;
-
- dd = pclk->dpll_data;
-
- WARN_ON(!dd->enable_mask);
-
- v = omap2_clk_readl(pclk, dd->control_reg) & dd->enable_mask;
- v >>= __ffs(dd->enable_mask);
- if ((v != OMAP3XXX_EN_DPLL_LOCKED) || (dd->flags & DPLL_J_TYPE))
- rate = parent_rate;
- else
- rate = parent_rate * 2;
- return rate;
-}
-
-int omap3_clkoutx2_set_rate(struct clk_hw *hw, unsigned long rate,
- unsigned long parent_rate)
-{
- return 0;
-}
-
-long omap3_clkoutx2_round_rate(struct clk_hw *hw, unsigned long rate,
- unsigned long *prate)
-{
- const struct dpll_data *dd;
- u32 v;
- struct clk_hw_omap *pclk = NULL;
-
- if (!*prate)
- return 0;
-
- pclk = omap3_find_clkoutx2_dpll(hw);
-
- if (!pclk)
- return 0;
-
- dd = pclk->dpll_data;
-
- /* TYPE J does not have a clkoutx2 */
- if (dd->flags & DPLL_J_TYPE) {
- *prate = __clk_round_rate(__clk_get_parent(pclk->hw.clk), rate);
- return *prate;
- }
-
- WARN_ON(!dd->enable_mask);
-
- v = omap2_clk_readl(pclk, dd->control_reg) & dd->enable_mask;
- v >>= __ffs(dd->enable_mask);
-
- /* If in bypass, the rate is fixed to the bypass rate*/
- if (v != OMAP3XXX_EN_DPLL_LOCKED)
- return *prate;
-
- if (__clk_get_flags(hw->clk) & CLK_SET_RATE_PARENT) {
- unsigned long best_parent;
-
- best_parent = (rate / 2);
- *prate = __clk_round_rate(__clk_get_parent(hw->clk),
- best_parent);
- }
-
- return *prate * 2;
-}
-
-/* OMAP3/4 non-CORE DPLL clkops */
-const struct clk_hw_omap_ops clkhwops_omap3_dpll = {
- .allow_idle = omap3_dpll_allow_idle,
- .deny_idle = omap3_dpll_deny_idle,
-};
diff --git a/drivers/clk/ti/Makefile b/drivers/clk/ti/Makefile
index 23cd726..fe2cfa2 100644
--- a/drivers/clk/ti/Makefile
+++ b/drivers/clk/ti/Makefile
@@ -1,7 +1,7 @@
obj-y += clk.o autoidle.o clockdomain.o
clk-common = dpll.o composite.o divider.o gate.o \
fixed-factor.o mux.o apll.o \
- clkt_dpll.o clkt_iclk.o
+ clkt_dpll.o clkt_iclk.o dpll3xxx.o
obj-$(CONFIG_SOC_AM33XX) += $(clk-common) clk-33xx.o
obj-$(CONFIG_SOC_TI81XX) += $(clk-common) fapll.o clk-816x.o
obj-$(CONFIG_ARCH_OMAP2) += $(clk-common) interface.o clk-2xxx.o
diff --git a/drivers/clk/ti/clk-3xxx.c b/drivers/clk/ti/clk-3xxx.c
index bb3b883..5489ad8 100644
--- a/drivers/clk/ti/clk-3xxx.c
+++ b/drivers/clk/ti/clk-3xxx.c
@@ -21,6 +21,13 @@
#include "clock.h"
+/*
+ * DPLL5_FREQ_FOR_USBHOST: USBHOST and USBTLL are the only clocks
+ * that are sourced by DPLL5, and both of these require this clock
+ * to be at 120 MHz for proper operation.
+ */
+#define DPLL5_FREQ_FOR_USBHOST 120000000
+
static struct ti_dt_clk omap3xxx_clks[] = {
DT_CLK(NULL, "apb_pclk", "dummy_apb_pclk"),
DT_CLK(NULL, "omap_32k_fck", "omap_32k_fck"),
@@ -325,6 +332,30 @@ enum {
OMAP3_SOC_OMAP3630,
};
+/**
+ * omap3_clk_lock_dpll5 - locks DPLL5
+ *
+ * Locks DPLL5 to a pre-defined frequency. This is required for proper
+ * operation of USB.
+ */
+void __init omap3_clk_lock_dpll5(void)
+{
+ struct clk *dpll5_clk;
+ struct clk *dpll5_m2_clk;
+
+ dpll5_clk = clk_get(NULL, "dpll5_ck");
+ clk_set_rate(dpll5_clk, DPLL5_FREQ_FOR_USBHOST);
+ clk_prepare_enable(dpll5_clk);
+
+ /* Program dpll5_m2_clk divider for no division */
+ dpll5_m2_clk = clk_get(NULL, "dpll5_m2_ck");
+ clk_prepare_enable(dpll5_m2_clk);
+ clk_set_rate(dpll5_m2_clk, DPLL5_FREQ_FOR_USBHOST);
+
+ clk_disable_unprepare(dpll5_m2_clk);
+ clk_disable_unprepare(dpll5_clk);
+}
+
static int __init omap3xxx_dt_clk_init(int soc_type)
{
if (soc_type == OMAP3_SOC_AM35XX || soc_type == OMAP3_SOC_OMAP3630 ||
diff --git a/drivers/clk/ti/clock.h b/drivers/clk/ti/clock.h
index 4b26af8..688d9e4 100644
--- a/drivers/clk/ti/clock.h
+++ b/drivers/clk/ti/clock.h
@@ -173,11 +173,38 @@ void omap2_init_clk_hw_omap_clocks(struct clk *clk);
int of_ti_clk_autoidle_setup(struct device_node *node);
void omap2_clk_enable_init_clocks(const char **clk_names, u8 num_clocks);
+extern const struct clk_hw_omap_ops clkhwops_omap3_dpll;
extern const struct clk_hw_omap_ops clkhwops_omap4_dpllmx;
extern const struct clk_hw_omap_ops clkhwops_iclk;
extern const struct clk_hw_omap_ops clkhwops_iclk_wait;
u8 omap2_init_dpll_parent(struct clk_hw *hw);
+int omap3_noncore_dpll_enable(struct clk_hw *hw);
+void omap3_noncore_dpll_disable(struct clk_hw *hw);
+int omap3_noncore_dpll_set_parent(struct clk_hw *hw, u8 index);
+int omap3_noncore_dpll_set_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long parent_rate);
+int omap3_noncore_dpll_set_rate_and_parent(struct clk_hw *hw,
+ unsigned long rate,
+ unsigned long parent_rate,
+ u8 index);
+long omap3_noncore_dpll_determine_rate(struct clk_hw *hw,
+ unsigned long rate,
+ unsigned long min_rate,
+ unsigned long max_rate,
+ unsigned long *best_parent_rate,
+ struct clk_hw **best_parent_clk);
+long omap2_dpll_round_rate(struct clk_hw *hw, unsigned long target_rate,
+ unsigned long *parent_rate);
+unsigned long omap3_clkoutx2_recalc(struct clk_hw *hw,
+ unsigned long parent_rate);
+
+unsigned long omap3_dpll_recalc(struct clk_hw *hw, unsigned long parent_rate);
+int omap3_dpll4_set_rate(struct clk_hw *clk, unsigned long rate,
+ unsigned long parent_rate);
+int omap3_dpll4_set_rate_and_parent(struct clk_hw *hw, unsigned long rate,
+ unsigned long parent_rate, u8 index);
+void omap3_clk_lock_dpll5(void);
unsigned long omap4_dpll_regm4xen_recalc(struct clk_hw *hw,
unsigned long parent_rate);
diff --git a/drivers/clk/ti/dpll3xxx.c b/drivers/clk/ti/dpll3xxx.c
new file mode 100644
index 0000000..22d77a3
--- /dev/null
+++ b/drivers/clk/ti/dpll3xxx.c
@@ -0,0 +1,825 @@
+/*
+ * OMAP3/4 - specific DPLL control functions
+ *
+ * Copyright (C) 2009-2010 Texas Instruments, Inc.
+ * Copyright (C) 2009-2010 Nokia Corporation
+ *
+ * Written by Paul Walmsley
+ * Testing and integration fixes by Jouni Högander
+ *
+ * 36xx support added by Vishwanath BS, Richard Woodruff, and Nishanth
+ * Menon
+ *
+ * Parts of this code are based on code written by
+ * Richard Woodruff, Tony Lindgren, Tuukka Tikkanen, Karthik Dasu
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/device.h>
+#include <linux/list.h>
+#include <linux/errno.h>
+#include <linux/delay.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/bitops.h>
+#include <linux/clkdev.h>
+#include <linux/clk/ti.h>
+
+#include "clock.h"
+
+/* CM_AUTOIDLE_PLL*.AUTO_* bit values */
+#define DPLL_AUTOIDLE_DISABLE 0x0
+#define DPLL_AUTOIDLE_LOW_POWER_STOP 0x1
+
+#define MAX_DPLL_WAIT_TRIES 1000000
+
+#define OMAP3XXX_EN_DPLL_LOCKED 0x7
+
+/* Forward declarations */
+static u32 omap3_dpll_autoidle_read(struct clk_hw_omap *clk);
+static void omap3_dpll_deny_idle(struct clk_hw_omap *clk);
+static void omap3_dpll_allow_idle(struct clk_hw_omap *clk);
+
+/* Private functions */
+
+/* _omap3_dpll_write_clken - write clken_bits arg to a DPLL's enable bits */
+static void _omap3_dpll_write_clken(struct clk_hw_omap *clk, u8 clken_bits)
+{
+ const struct dpll_data *dd;
+ u32 v;
+
+ dd = clk->dpll_data;
+
+ v = ti_clk_ll_ops->clk_readl(dd->control_reg);
+ v &= ~dd->enable_mask;
+ v |= clken_bits << __ffs(dd->enable_mask);
+ ti_clk_ll_ops->clk_writel(v, dd->control_reg);
+}
+
+/* _omap3_wait_dpll_status: wait for a DPLL to enter a specific state */
+static int _omap3_wait_dpll_status(struct clk_hw_omap *clk, u8 state)
+{
+ const struct dpll_data *dd;
+ int i = 0;
+ int ret = -EINVAL;
+ const char *clk_name;
+
+ dd = clk->dpll_data;
+ clk_name = __clk_get_name(clk->hw.clk);
+
+ state <<= __ffs(dd->idlest_mask);
+
+ while (((ti_clk_ll_ops->clk_readl(dd->idlest_reg) & dd->idlest_mask)
+ != state) && i < MAX_DPLL_WAIT_TRIES) {
+ i++;
+ udelay(1);
+ }
+
+ if (i == MAX_DPLL_WAIT_TRIES) {
+ pr_err("clock: %s failed transition to '%s'\n",
+ clk_name, (state) ? "locked" : "bypassed");
+ } else {
+ pr_debug("clock: %s transition to '%s' in %d loops\n",
+ clk_name, (state) ? "locked" : "bypassed", i);
+
+ ret = 0;
+ }
+
+ return ret;
+}
+
+/* From 3430 TRM ES2 4.7.6.2 */
+static u16 _omap3_dpll_compute_freqsel(struct clk_hw_omap *clk, u8 n)
+{
+ unsigned long fint;
+ u16 f = 0;
+
+ fint = __clk_get_rate(clk->dpll_data->clk_ref) / n;
+
+ pr_debug("clock: fint is %lu\n", fint);
+
+ if (fint >= 750000 && fint <= 1000000)
+ f = 0x3;
+ else if (fint > 1000000 && fint <= 1250000)
+ f = 0x4;
+ else if (fint > 1250000 && fint <= 1500000)
+ f = 0x5;
+ else if (fint > 1500000 && fint <= 1750000)
+ f = 0x6;
+ else if (fint > 1750000 && fint <= 2100000)
+ f = 0x7;
+ else if (fint > 7500000 && fint <= 10000000)
+ f = 0xB;
+ else if (fint > 10000000 && fint <= 12500000)
+ f = 0xC;
+ else if (fint > 12500000 && fint <= 15000000)
+ f = 0xD;
+ else if (fint > 15000000 && fint <= 17500000)
+ f = 0xE;
+ else if (fint > 17500000 && fint <= 21000000)
+ f = 0xF;
+ else
+ pr_debug("clock: unknown freqsel setting for %d\n", n);
+
+ return f;
+}
+
+/*
+ * _omap3_noncore_dpll_lock - instruct a DPLL to lock and wait for readiness
+ * @clk: pointer to a DPLL struct clk
+ *
+ * Instructs a non-CORE DPLL to lock. Waits for the DPLL to report
+ * readiness before returning. Will save and restore the DPLL's
+ * autoidle state across the enable, per the CDP code. If the DPLL
+ * locked successfully, return 0; if the DPLL did not lock in the time
+ * allotted, or DPLL3 was passed in, return -EINVAL.
+ */
+static int _omap3_noncore_dpll_lock(struct clk_hw_omap *clk)
+{
+ const struct dpll_data *dd;
+ u8 ai;
+ u8 state = 1;
+ int r = 0;
+
+ pr_debug("clock: locking DPLL %s\n", __clk_get_name(clk->hw.clk));
+
+ dd = clk->dpll_data;
+ state <<= __ffs(dd->idlest_mask);
+
+ /* Check if already locked */
+ if ((ti_clk_ll_ops->clk_readl(dd->idlest_reg) & dd->idlest_mask) ==
+ state)
+ goto done;
+
+ ai = omap3_dpll_autoidle_read(clk);
+
+ if (ai)
+ omap3_dpll_deny_idle(clk);
+
+ _omap3_dpll_write_clken(clk, DPLL_LOCKED);
+
+ r = _omap3_wait_dpll_status(clk, 1);
+
+ if (ai)
+ omap3_dpll_allow_idle(clk);
+
+done:
+ return r;
+}
+
+/*
+ * _omap3_noncore_dpll_bypass - instruct a DPLL to bypass and wait for readiness
+ * @clk: pointer to a DPLL struct clk
+ *
+ * Instructs a non-CORE DPLL to enter low-power bypass mode. In
+ * bypass mode, the DPLL's rate is set equal to its parent clock's
+ * rate. Waits for the DPLL to report readiness before returning.
+ * Will save and restore the DPLL's autoidle state across the enable,
+ * per the CDP code. If the DPLL entered bypass mode successfully,
+ * return 0; if the DPLL did not enter bypass in the time allotted, or
+ * DPLL3 was passed in, or the DPLL does not support low-power bypass,
+ * return -EINVAL.
+ */
+static int _omap3_noncore_dpll_bypass(struct clk_hw_omap *clk)
+{
+ int r;
+ u8 ai;
+
+ if (!(clk->dpll_data->modes & (1 << DPLL_LOW_POWER_BYPASS)))
+ return -EINVAL;
+
+ pr_debug("clock: configuring DPLL %s for low-power bypass\n",
+ __clk_get_name(clk->hw.clk));
+
+ ai = omap3_dpll_autoidle_read(clk);
+
+ _omap3_dpll_write_clken(clk, DPLL_LOW_POWER_BYPASS);
+
+ r = _omap3_wait_dpll_status(clk, 0);
+
+ if (ai)
+ omap3_dpll_allow_idle(clk);
+
+ return r;
+}
+
+/*
+ * _omap3_noncore_dpll_stop - instruct a DPLL to stop
+ * @clk: pointer to a DPLL struct clk
+ *
+ * Instructs a non-CORE DPLL to enter low-power stop. Will save and
+ * restore the DPLL's autoidle state across the stop, per the CDP
+ * code. If DPLL3 was passed in, or the DPLL does not support
+ * low-power stop, return -EINVAL; otherwise, return 0.
+ */
+static int _omap3_noncore_dpll_stop(struct clk_hw_omap *clk)
+{
+ u8 ai;
+
+ if (!(clk->dpll_data->modes & (1 << DPLL_LOW_POWER_STOP)))
+ return -EINVAL;
+
+ pr_debug("clock: stopping DPLL %s\n", __clk_get_name(clk->hw.clk));
+
+ ai = omap3_dpll_autoidle_read(clk);
+
+ _omap3_dpll_write_clken(clk, DPLL_LOW_POWER_STOP);
+
+ if (ai)
+ omap3_dpll_allow_idle(clk);
+
+ return 0;
+}
+
+/**
+ * _lookup_dco - Lookup DCO used by j-type DPLL
+ * @clk: pointer to a DPLL struct clk
+ * @dco: digital control oscillator selector
+ * @m: DPLL multiplier to set
+ * @n: DPLL divider to set
+ *
+ * See 36xx TRM section 3.5.3.3.3.2 "Type B DPLL (Low-Jitter)"
+ *
+ * XXX This code is not needed for 3430/AM35xx; can it be optimized
+ * out in non-multi-OMAP builds for those chips?
+ */
+static void _lookup_dco(struct clk_hw_omap *clk, u8 *dco, u16 m, u8 n)
+{
+ unsigned long fint, clkinp; /* watch out for overflow */
+
+ clkinp = __clk_get_rate(__clk_get_parent(clk->hw.clk));
+ fint = (clkinp / n) * m;
+
+ if (fint < 1000000000)
+ *dco = 2;
+ else
+ *dco = 4;
+}
+
+/**
+ * _lookup_sddiv - Calculate sigma delta divider for j-type DPLL
+ * @clk: pointer to a DPLL struct clk
+ * @sd_div: target sigma-delta divider
+ * @m: DPLL multiplier to set
+ * @n: DPLL divider to set
+ *
+ * See 36xx TRM section 3.5.3.3.3.2 "Type B DPLL (Low-Jitter)"
+ *
+ * XXX This code is not needed for 3430/AM35xx; can it be optimized
+ * out in non-multi-OMAP builds for those chips?
+ */
+static void _lookup_sddiv(struct clk_hw_omap *clk, u8 *sd_div, u16 m, u8 n)
+{
+ unsigned long clkinp, sd; /* watch out for overflow */
+ int mod1, mod2;
+
+ clkinp = __clk_get_rate(__clk_get_parent(clk->hw.clk));
+
+ /*
+ * target sigma-delta to near 250MHz
+ * sd = ceil[(m/(n+1)) * (clkinp_MHz / 250)]
+ */
+ clkinp /= 100000; /* shift from MHz to 10*Hz for 38.4 and 19.2 */
+ mod1 = (clkinp * m) % (250 * n);
+ sd = (clkinp * m) / (250 * n);
+ mod2 = sd % 10;
+ sd /= 10;
+
+ if (mod1 || mod2)
+ sd++;
+ *sd_div = sd;
+}
+
+/*
+ * _omap3_noncore_dpll_program - set non-core DPLL M,N values directly
+ * @clk: struct clk * of DPLL to set
+ * @freqsel: FREQSEL value to set
+ *
+ * Program the DPLL with the last M, N values calculated, and wait for
+ * the DPLL to lock. Returns -EINVAL upon error, or 0 upon success.
+ */
+static int omap3_noncore_dpll_program(struct clk_hw_omap *clk, u16 freqsel)
+{
+ struct dpll_data *dd = clk->dpll_data;
+ u8 dco, sd_div;
+ u32 v;
+
+ /* 3430 ES2 TRM: 4.7.6.9 DPLL Programming Sequence */
+ _omap3_noncore_dpll_bypass(clk);
+
+ /*
+ * Set jitter correction. Jitter correction applicable for OMAP343X
+ * only since freqsel field is no longer present on other devices.
+ */
+ if (ti_clk_get_features()->flags & TI_CLK_DPLL_HAS_FREQSEL) {
+ v = ti_clk_ll_ops->clk_readl(dd->control_reg);
+ v &= ~dd->freqsel_mask;
+ v |= freqsel << __ffs(dd->freqsel_mask);
+ ti_clk_ll_ops->clk_writel(v, dd->control_reg);
+ }
+
+ /* Set DPLL multiplier, divider */
+ v = ti_clk_ll_ops->clk_readl(dd->mult_div1_reg);
+
+ /* Handle Duty Cycle Correction */
+ if (dd->dcc_mask) {
+ if (dd->last_rounded_rate >= dd->dcc_rate)
+ v |= dd->dcc_mask; /* Enable DCC */
+ else
+ v &= ~dd->dcc_mask; /* Disable DCC */
+ }
+
+ v &= ~(dd->mult_mask | dd->div1_mask);
+ v |= dd->last_rounded_m << __ffs(dd->mult_mask);
+ v |= (dd->last_rounded_n - 1) << __ffs(dd->div1_mask);
+
+ /* Configure dco and sd_div for dplls that have these fields */
+ if (dd->dco_mask) {
+ _lookup_dco(clk, &dco, dd->last_rounded_m, dd->last_rounded_n);
+ v &= ~(dd->dco_mask);
+ v |= dco << __ffs(dd->dco_mask);
+ }
+ if (dd->sddiv_mask) {
+ _lookup_sddiv(clk, &sd_div, dd->last_rounded_m,
+ dd->last_rounded_n);
+ v &= ~(dd->sddiv_mask);
+ v |= sd_div << __ffs(dd->sddiv_mask);
+ }
+
+ ti_clk_ll_ops->clk_writel(v, dd->mult_div1_reg);
+
+ /* Set 4X multiplier and low-power mode */
+ if (dd->m4xen_mask || dd->lpmode_mask) {
+ v = ti_clk_ll_ops->clk_readl(dd->control_reg);
+
+ if (dd->m4xen_mask) {
+ if (dd->last_rounded_m4xen)
+ v |= dd->m4xen_mask;
+ else
+ v &= ~dd->m4xen_mask;
+ }
+
+ if (dd->lpmode_mask) {
+ if (dd->last_rounded_lpmode)
+ v |= dd->lpmode_mask;
+ else
+ v &= ~dd->lpmode_mask;
+ }
+
+ ti_clk_ll_ops->clk_writel(v, dd->control_reg);
+ }
+
+ /* We let the clock framework set the other output dividers later */
+
+ /* REVISIT: Set ramp-up delay? */
+
+ _omap3_noncore_dpll_lock(clk);
+
+ return 0;
+}
+
+/* Public functions */
+
+/**
+ * omap3_dpll_recalc - recalculate DPLL rate
+ * @clk: DPLL struct clk
+ *
+ * Recalculate and propagate the DPLL rate.
+ */
+unsigned long omap3_dpll_recalc(struct clk_hw *hw, unsigned long parent_rate)
+{
+ struct clk_hw_omap *clk = to_clk_hw_omap(hw);
+
+ return omap2_get_dpll_rate(clk);
+}
+
+/* Non-CORE DPLL (e.g., DPLLs that do not control SDRC) clock functions */
+
+/**
+ * omap3_noncore_dpll_enable - instruct a DPLL to enter bypass or lock mode
+ * @clk: pointer to a DPLL struct clk
+ *
+ * Instructs a non-CORE DPLL to enable, e.g., to enter bypass or lock.
+ * The choice of modes depends on the DPLL's programmed rate: if it is
+ * the same as the DPLL's parent clock, it will enter bypass;
+ * otherwise, it will enter lock. This code will wait for the DPLL to
+ * indicate readiness before returning, unless the DPLL takes too long
+ * to enter the target state. Intended to be used as the struct clk's
+ * enable function. If DPLL3 was passed in, or the DPLL does not
+ * support low-power stop, or if the DPLL took too long to enter
+ * bypass or lock, return -EINVAL; otherwise, return 0.
+ */
+int omap3_noncore_dpll_enable(struct clk_hw *hw)
+{
+ struct clk_hw_omap *clk = to_clk_hw_omap(hw);
+ int r;
+ struct dpll_data *dd;
+ struct clk_hw *parent;
+
+ dd = clk->dpll_data;
+ if (!dd)
+ return -EINVAL;
+
+ if (clk->clkdm) {
+ r = ti_clk_ll_ops->clkdm_clk_enable(clk->clkdm, hw->clk);
+ if (r) {
+ WARN(1,
+ "%s: could not enable %s's clockdomain %s: %d\n",
+ __func__, __clk_get_name(hw->clk),
+ clk->clkdm_name, r);
+ return r;
+ }
+ }
+
+ parent = __clk_get_hw(__clk_get_parent(hw->clk));
+
+ if (__clk_get_rate(hw->clk) == __clk_get_rate(dd->clk_bypass)) {
+ WARN_ON(parent != __clk_get_hw(dd->clk_bypass));
+ r = _omap3_noncore_dpll_bypass(clk);
+ } else {
+ WARN_ON(parent != __clk_get_hw(dd->clk_ref));
+ r = _omap3_noncore_dpll_lock(clk);
+ }
+
+ return r;
+}
+
+/**
+ * omap3_noncore_dpll_disable - instruct a DPLL to enter low-power stop
+ * @clk: pointer to a DPLL struct clk
+ *
+ * Instructs a non-CORE DPLL to enter low-power stop. This function is
+ * intended for use in struct clkops. No return value.
+ */
+void omap3_noncore_dpll_disable(struct clk_hw *hw)
+{
+ struct clk_hw_omap *clk = to_clk_hw_omap(hw);
+
+ _omap3_noncore_dpll_stop(clk);
+ if (clk->clkdm)
+ ti_clk_ll_ops->clkdm_clk_disable(clk->clkdm, hw->clk);
+}
+
+/* Non-CORE DPLL rate set code */
+
+/**
+ * omap3_noncore_dpll_determine_rate - determine rate for a DPLL
+ * @hw: pointer to the clock to determine rate for
+ * @rate: target rate for the DPLL
+ * @best_parent_rate: pointer for returning best parent rate
+ * @best_parent_clk: pointer for returning best parent clock
+ *
+ * Determines which DPLL mode to use for reaching a desired target rate.
+ * Checks whether the DPLL shall be in bypass or locked mode, and if
+ * locked, calculates the M,N values for the DPLL via round-rate.
+ * Returns a positive clock rate with success, negative error value
+ * in failure.
+ */
+long omap3_noncore_dpll_determine_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long min_rate,
+ unsigned long max_rate,
+ unsigned long *best_parent_rate,
+ struct clk_hw **best_parent_clk)
+{
+ struct clk_hw_omap *clk = to_clk_hw_omap(hw);
+ struct dpll_data *dd;
+
+ if (!hw || !rate)
+ return -EINVAL;
+
+ dd = clk->dpll_data;
+ if (!dd)
+ return -EINVAL;
+
+ if (__clk_get_rate(dd->clk_bypass) == rate &&
+ (dd->modes & (1 << DPLL_LOW_POWER_BYPASS))) {
+ *best_parent_clk = __clk_get_hw(dd->clk_bypass);
+ } else {
+ rate = omap2_dpll_round_rate(hw, rate, best_parent_rate);
+ *best_parent_clk = __clk_get_hw(dd->clk_ref);
+ }
+
+ *best_parent_rate = rate;
+
+ return rate;
+}
+
+/**
+ * omap3_noncore_dpll_set_parent - set parent for a DPLL clock
+ * @hw: pointer to the clock to set parent for
+ * @index: parent index to select
+ *
+ * Sets parent for a DPLL clock. This sets the DPLL into bypass or
+ * locked mode. Returns 0 with success, negative error value otherwise.
+ */
+int omap3_noncore_dpll_set_parent(struct clk_hw *hw, u8 index)
+{
+ struct clk_hw_omap *clk = to_clk_hw_omap(hw);
+ int ret;
+
+ if (!hw)
+ return -EINVAL;
+
+ if (index)
+ ret = _omap3_noncore_dpll_bypass(clk);
+ else
+ ret = _omap3_noncore_dpll_lock(clk);
+
+ return ret;
+}
+
+/**
+ * omap3_noncore_dpll_set_rate - set rate for a DPLL clock
+ * @hw: pointer to the clock to set parent for
+ * @rate: target rate for the clock
+ * @parent_rate: rate of the parent clock
+ *
+ * Sets rate for a DPLL clock. First checks if the clock parent is
+ * reference clock (in bypass mode, the rate of the clock can't be
+ * changed) and proceeds with the rate change operation. Returns 0
+ * with success, negative error value otherwise.
+ */
+int omap3_noncore_dpll_set_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long parent_rate)
+{
+ struct clk_hw_omap *clk = to_clk_hw_omap(hw);
+ struct dpll_data *dd;
+ u16 freqsel = 0;
+ int ret;
+
+ if (!hw || !rate)
+ return -EINVAL;
+
+ dd = clk->dpll_data;
+ if (!dd)
+ return -EINVAL;
+
+ if (__clk_get_hw(__clk_get_parent(hw->clk)) !=
+ __clk_get_hw(dd->clk_ref))
+ return -EINVAL;
+
+ if (dd->last_rounded_rate == 0)
+ return -EINVAL;
+
+ /* Freqsel is available only on OMAP343X devices */
+ if (ti_clk_get_features()->flags & TI_CLK_DPLL_HAS_FREQSEL) {
+ freqsel = _omap3_dpll_compute_freqsel(clk, dd->last_rounded_n);
+ WARN_ON(!freqsel);
+ }
+
+ pr_debug("%s: %s: set rate: locking rate to %lu.\n", __func__,
+ __clk_get_name(hw->clk), rate);
+
+ ret = omap3_noncore_dpll_program(clk, freqsel);
+
+ return ret;
+}
+
+/**
+ * omap3_noncore_dpll_set_rate_and_parent - set rate and parent for a DPLL clock
+ * @hw: pointer to the clock to set rate and parent for
+ * @rate: target rate for the DPLL
+ * @parent_rate: clock rate of the DPLL parent
+ * @index: new parent index for the DPLL, 0 - reference, 1 - bypass
+ *
+ * Sets rate and parent for a DPLL clock. If new parent is the bypass
+ * clock, only selects the parent. Otherwise proceeds with a rate
+ * change, as this will effectively also change the parent as the
+ * DPLL is put into locked mode. Returns 0 with success, negative error
+ * value otherwise.
+ */
+int omap3_noncore_dpll_set_rate_and_parent(struct clk_hw *hw,
+ unsigned long rate,
+ unsigned long parent_rate,
+ u8 index)
+{
+ int ret;
+
+ if (!hw || !rate)
+ return -EINVAL;
+
+ /*
+ * clk-ref at index[0], in which case we only need to set rate,
+ * the parent will be changed automatically with the lock sequence.
+ * With clk-bypass case we only need to change parent.
+ */
+ if (index)
+ ret = omap3_noncore_dpll_set_parent(hw, index);
+ else
+ ret = omap3_noncore_dpll_set_rate(hw, rate, parent_rate);
+
+ return ret;
+}
+
+/* DPLL autoidle read/set code */
+
+/**
+ * omap3_dpll_autoidle_read - read a DPLL's autoidle bits
+ * @clk: struct clk * of the DPLL to read
+ *
+ * Return the DPLL's autoidle bits, shifted down to bit 0. Returns
+ * -EINVAL if passed a null pointer or if the struct clk does not
+ * appear to refer to a DPLL.
+ */
+static u32 omap3_dpll_autoidle_read(struct clk_hw_omap *clk)
+{
+ const struct dpll_data *dd;
+ u32 v;
+
+ if (!clk || !clk->dpll_data)
+ return -EINVAL;
+
+ dd = clk->dpll_data;
+
+ if (!dd->autoidle_reg)
+ return -EINVAL;
+
+ v = ti_clk_ll_ops->clk_readl(dd->autoidle_reg);
+ v &= dd->autoidle_mask;
+ v >>= __ffs(dd->autoidle_mask);
+
+ return v;
+}
+
+/**
+ * omap3_dpll_allow_idle - enable DPLL autoidle bits
+ * @clk: struct clk * of the DPLL to operate on
+ *
+ * Enable DPLL automatic idle control. This automatic idle mode
+ * switching takes effect only when the DPLL is locked, at least on
+ * OMAP3430. The DPLL will enter low-power stop when its downstream
+ * clocks are gated. No return value.
+ */
+static void omap3_dpll_allow_idle(struct clk_hw_omap *clk)
+{
+ const struct dpll_data *dd;
+ u32 v;
+
+ if (!clk || !clk->dpll_data)
+ return;
+
+ dd = clk->dpll_data;
+
+ if (!dd->autoidle_reg)
+ return;
+
+ /*
+ * REVISIT: CORE DPLL can optionally enter low-power bypass
+ * by writing 0x5 instead of 0x1. Add some mechanism to
+ * optionally enter this mode.
+ */
+ v = ti_clk_ll_ops->clk_readl(dd->autoidle_reg);
+ v &= ~dd->autoidle_mask;
+ v |= DPLL_AUTOIDLE_LOW_POWER_STOP << __ffs(dd->autoidle_mask);
+ ti_clk_ll_ops->clk_writel(v, dd->autoidle_reg);
+}
+
+/**
+ * omap3_dpll_deny_idle - prevent DPLL from automatically idling
+ * @clk: struct clk * of the DPLL to operate on
+ *
+ * Disable DPLL automatic idle control. No return value.
+ */
+static void omap3_dpll_deny_idle(struct clk_hw_omap *clk)
+{
+ const struct dpll_data *dd;
+ u32 v;
+
+ if (!clk || !clk->dpll_data)
+ return;
+
+ dd = clk->dpll_data;
+
+ if (!dd->autoidle_reg)
+ return;
+
+ v = ti_clk_ll_ops->clk_readl(dd->autoidle_reg);
+ v &= ~dd->autoidle_mask;
+ v |= DPLL_AUTOIDLE_DISABLE << __ffs(dd->autoidle_mask);
+ ti_clk_ll_ops->clk_writel(v, dd->autoidle_reg);
+}
+
+/* Clock control for DPLL outputs */
+
+/* Find the parent DPLL for the given clkoutx2 clock */
+static struct clk_hw_omap *omap3_find_clkoutx2_dpll(struct clk_hw *hw)
+{
+ struct clk_hw_omap *pclk = NULL;
+ struct clk *parent;
+
+ /* Walk up the parents of clk, looking for a DPLL */
+ do {
+ do {
+ parent = __clk_get_parent(hw->clk);
+ hw = __clk_get_hw(parent);
+ } while (hw && (__clk_get_flags(hw->clk) & CLK_IS_BASIC));
+ if (!hw)
+ break;
+ pclk = to_clk_hw_omap(hw);
+ } while (pclk && !pclk->dpll_data);
+
+ /* clk does not have a DPLL as a parent? error in the clock data */
+ if (!pclk) {
+ WARN_ON(1);
+ return NULL;
+ }
+
+ return pclk;
+}
+
+/**
+ * omap3_clkoutx2_recalc - recalculate DPLL X2 output virtual clock rate
+ * @clk: DPLL output struct clk
+ *
+ * Using parent clock DPLL data, look up DPLL state. If locked, set our
+ * rate to the dpll_clk * 2; otherwise, just use dpll_clk.
+ */
+unsigned long omap3_clkoutx2_recalc(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ const struct dpll_data *dd;
+ unsigned long rate;
+ u32 v;
+ struct clk_hw_omap *pclk = NULL;
+
+ if (!parent_rate)
+ return 0;
+
+ pclk = omap3_find_clkoutx2_dpll(hw);
+
+ if (!pclk)
+ return 0;
+
+ dd = pclk->dpll_data;
+
+ WARN_ON(!dd->enable_mask);
+
+ v = ti_clk_ll_ops->clk_readl(dd->control_reg) & dd->enable_mask;
+ v >>= __ffs(dd->enable_mask);
+ if ((v != OMAP3XXX_EN_DPLL_LOCKED) || (dd->flags & DPLL_J_TYPE))
+ rate = parent_rate;
+ else
+ rate = parent_rate * 2;
+ return rate;
+}
+
+/* OMAP3/4 non-CORE DPLL clkops */
+const struct clk_hw_omap_ops clkhwops_omap3_dpll = {
+ .allow_idle = omap3_dpll_allow_idle,
+ .deny_idle = omap3_dpll_deny_idle,
+};
+
+/**
+ * omap3_dpll4_set_rate - set rate for omap3 per-dpll
+ * @hw: clock to change
+ * @rate: target rate for clock
+ * @parent_rate: rate of the parent clock
+ *
+ * Check if the current SoC supports the per-dpll reprogram operation
+ * or not, and then do the rate change if supported. Returns -EINVAL
+ * if not supported, 0 for success, and potential error codes from the
+ * clock rate change.
+ */
+int omap3_dpll4_set_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long parent_rate)
+{
+ /*
+ * According to the 12-5 CDP code from TI, "Limitation 2.5"
+ * on 3430ES1 prevents us from changing DPLL multipliers or dividers
+ * on DPLL4.
+ */
+ if (ti_clk_get_features()->flags & TI_CLK_DPLL4_DENY_REPROGRAM) {
+ pr_err("clock: DPLL4 cannot change rate due to silicon 'Limitation 2.5' on 3430ES1.\n");
+ return -EINVAL;
+ }
+
+ return omap3_noncore_dpll_set_rate(hw, rate, parent_rate);
+}
+
+/**
+ * omap3_dpll4_set_rate_and_parent - set rate and parent for omap3 per-dpll
+ * @hw: clock to change
+ * @rate: target rate for clock
+ * @parent_rate: rate of the parent clock
+ * @index: parent index, 0 - reference clock, 1 - bypass clock
+ *
+ * Check if the current SoC support the per-dpll reprogram operation
+ * or not, and then do the rate + parent change if supported. Returns
+ * -EINVAL if not supported, 0 for success, and potential error codes
+ * from the clock rate change.
+ */
+int omap3_dpll4_set_rate_and_parent(struct clk_hw *hw, unsigned long rate,
+ unsigned long parent_rate, u8 index)
+{
+ if (ti_clk_get_features()->flags & TI_CLK_DPLL4_DENY_REPROGRAM) {
+ pr_err("clock: DPLL4 cannot change rate due to silicon 'Limitation 2.5' on 3430ES1.\n");
+ return -EINVAL;
+ }
+
+ return omap3_noncore_dpll_set_rate_and_parent(hw, rate, parent_rate,
+ index);
+}
diff --git a/include/linux/clk/ti.h b/include/linux/clk/ti.h
index 3ca818e..0f9d15f 100644
--- a/include/linux/clk/ti.h
+++ b/include/linux/clk/ti.h
@@ -271,41 +271,13 @@ extern const struct clk_ops ti_clk_mux_ops;
#define to_clk_hw_omap(_hw) container_of(_hw, struct clk_hw_omap, hw)
-int omap3_noncore_dpll_enable(struct clk_hw *hw);
-void omap3_noncore_dpll_disable(struct clk_hw *hw);
-int omap3_noncore_dpll_set_parent(struct clk_hw *hw, u8 index);
-int omap3_noncore_dpll_set_rate(struct clk_hw *hw, unsigned long rate,
- unsigned long parent_rate);
-int omap3_noncore_dpll_set_rate_and_parent(struct clk_hw *hw,
- unsigned long rate,
- unsigned long parent_rate,
- u8 index);
-long omap3_noncore_dpll_determine_rate(struct clk_hw *hw,
- unsigned long rate,
- unsigned long min_rate,
- unsigned long max_rate,
- unsigned long *best_parent_rate,
- struct clk_hw **best_parent_clk);
-unsigned long omap3_dpll_recalc(struct clk_hw *hw, unsigned long parent_rate);
-long omap2_dpll_round_rate(struct clk_hw *hw, unsigned long target_rate,
- unsigned long *parent_rate);
void omap2_init_clk_clkdm(struct clk_hw *clk);
-unsigned long omap3_clkoutx2_recalc(struct clk_hw *hw,
- unsigned long parent_rate);
-int omap3_clkoutx2_set_rate(struct clk_hw *hw, unsigned long rate,
- unsigned long parent_rate);
-long omap3_clkoutx2_round_rate(struct clk_hw *hw, unsigned long rate,
- unsigned long *prate);
int omap2_clkops_enable_clkdm(struct clk_hw *hw);
void omap2_clkops_disable_clkdm(struct clk_hw *hw);
int omap2_clk_disable_autoidle_all(void);
int omap2_clk_enable_autoidle_all(void);
int omap2_clk_allow_idle(struct clk *clk);
int omap2_clk_deny_idle(struct clk *clk);
-int omap3_dpll4_set_rate(struct clk_hw *clk, unsigned long rate,
- unsigned long parent_rate);
-int omap3_dpll4_set_rate_and_parent(struct clk_hw *hw, unsigned long rate,
- unsigned long parent_rate, u8 index);
int omap2_dflt_clk_enable(struct clk_hw *hw);
void omap2_dflt_clk_disable(struct clk_hw *hw);
int omap2_dflt_clk_is_enabled(struct clk_hw *hw);
@@ -317,7 +289,6 @@ void omap2_clk_dflt_find_companion(struct clk_hw_omap *clk,
void omap2_clk_dflt_find_idlest(struct clk_hw_omap *clk,
void __iomem **idlest_reg,
u8 *idlest_bit, u8 *idlest_val);
-void omap3_clk_lock_dpll5(void);
unsigned long omap2_dpllcore_recalc(struct clk_hw *hw,
unsigned long parent_rate);
int omap2_reprogram_dpllcore(struct clk_hw *clk, unsigned long rate,
@@ -365,7 +336,6 @@ struct ti_clk_features *ti_clk_get_features(void);
extern const struct clk_hw_omap_ops clkhwops_omap2xxx_dpll;
extern const struct clk_hw_omap_ops clkhwops_omap2430_i2chs_wait;
-extern const struct clk_hw_omap_ops clkhwops_omap3_dpll;
extern const struct clk_hw_omap_ops clkhwops_wait;
extern const struct clk_hw_omap_ops clkhwops_omap3430es2_dss_usbhost_wait;
extern const struct clk_hw_omap_ops clkhwops_am35xx_ipss_module_wait;
--
1.7.9.5
^ permalink raw reply related [flat|nested] 120+ messages in thread
* [PATCHv2 14/27] clk: ti: dpll: move omap3 DPLL functionality to clock driver
@ 2015-05-11 8:54 ` Tero Kristo
0 siblings, 0 replies; 120+ messages in thread
From: Tero Kristo @ 2015-05-11 8:54 UTC (permalink / raw)
To: mturquette, tony, linux-omap, linux-clk, sboyd, paul; +Cc: linux-arm-kernel
With the legacy clock support gone, OMAP3 generic DPLL code can now be
moved over to the clock driver also. A few un-unused clkoutx2 functions
are also removed at the same time.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
---
arch/arm/mach-omap2/Makefile | 8 +-
arch/arm/mach-omap2/clock.h | 4 -
arch/arm/mach-omap2/clock3xxx.c | 77 ----
arch/arm/mach-omap2/dpll3xxx.c | 818 --------------------------------------
drivers/clk/ti/Makefile | 2 +-
drivers/clk/ti/clk-3xxx.c | 31 ++
drivers/clk/ti/clock.h | 27 ++
drivers/clk/ti/dpll3xxx.c | 825 +++++++++++++++++++++++++++++++++++++++
include/linux/clk/ti.h | 30 --
9 files changed, 886 insertions(+), 936 deletions(-)
delete mode 100644 arch/arm/mach-omap2/dpll3xxx.c
create mode 100644 drivers/clk/ti/dpll3xxx.c
diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
index bf5d71d..f9d4ccf 100644
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -189,15 +189,11 @@ obj-$(CONFIG_SOC_OMAP2430) += clock2430.o
obj-$(CONFIG_ARCH_OMAP3) += $(clock-common) clock3xxx.o
obj-$(CONFIG_ARCH_OMAP3) += clock34xx.o clkt34xx_dpll3m2.o
obj-$(CONFIG_ARCH_OMAP3) += clock3517.o
-obj-$(CONFIG_ARCH_OMAP3) += dpll3xxx.o
obj-$(CONFIG_ARCH_OMAP4) += $(clock-common)
-obj-$(CONFIG_ARCH_OMAP4) += dpll3xxx.o
-obj-$(CONFIG_SOC_AM33XX) += $(clock-common) dpll3xxx.o
+obj-$(CONFIG_SOC_AM33XX) += $(clock-common)
obj-$(CONFIG_SOC_OMAP5) += $(clock-common)
-obj-$(CONFIG_SOC_OMAP5) += dpll3xxx.o
obj-$(CONFIG_SOC_DRA7XX) += $(clock-common)
-obj-$(CONFIG_SOC_DRA7XX) += dpll3xxx.o
-obj-$(CONFIG_SOC_AM43XX) += $(clock-common) dpll3xxx.o
+obj-$(CONFIG_SOC_AM43XX) += $(clock-common)
# OMAP2 clock rate set data (old "OPP" data)
obj-$(CONFIG_SOC_OMAP2420) += opp2420_data.o
diff --git a/arch/arm/mach-omap2/clock.h b/arch/arm/mach-omap2/clock.h
index e2781b4..d60691d 100644
--- a/arch/arm/mach-omap2/clock.h
+++ b/arch/arm/mach-omap2/clock.h
@@ -180,10 +180,6 @@ struct clksel {
#define OMAP4XXX_EN_DPLL_FRBYPASS 0x6
#define OMAP4XXX_EN_DPLL_LOCKED 0x7
-u32 omap3_dpll_autoidle_read(struct clk_hw_omap *clk);
-void omap3_dpll_allow_idle(struct clk_hw_omap *clk);
-void omap3_dpll_deny_idle(struct clk_hw_omap *clk);
-
void __init omap2_clk_disable_clkdm_control(void);
void omap2_clk_print_new_rates(const char *hfclkin_ck_name,
diff --git a/arch/arm/mach-omap2/clock3xxx.c b/arch/arm/mach-omap2/clock3xxx.c
index 4bd6122..0b0e3a87 100644
--- a/arch/arm/mach-omap2/clock3xxx.c
+++ b/arch/arm/mach-omap2/clock3xxx.c
@@ -29,82 +29,5 @@
#include "cm2xxx_3xxx.h"
#include "cm-regbits-34xx.h"
-/*
- * DPLL5_FREQ_FOR_USBHOST: USBHOST and USBTLL are the only clocks
- * that are sourced by DPLL5, and both of these require this clock
- * to be at 120 MHz for proper operation.
- */
-#define DPLL5_FREQ_FOR_USBHOST 120000000
-
/* needed by omap3_core_dpll_m2_set_rate() */
struct clk *sdrc_ick_p, *arm_fck_p;
-
-/**
- * omap3_dpll4_set_rate - set rate for omap3 per-dpll
- * @hw: clock to change
- * @rate: target rate for clock
- * @parent_rate: rate of the parent clock
- *
- * Check if the current SoC supports the per-dpll reprogram operation
- * or not, and then do the rate change if supported. Returns -EINVAL
- * if not supported, 0 for success, and potential error codes from the
- * clock rate change.
- */
-int omap3_dpll4_set_rate(struct clk_hw *hw, unsigned long rate,
- unsigned long parent_rate)
-{
- /*
- * According to the 12-5 CDP code from TI, "Limitation 2.5"
- * on 3430ES1 prevents us from changing DPLL multipliers or dividers
- * on DPLL4.
- */
- if (ti_clk_get_features()->flags & TI_CLK_DPLL4_DENY_REPROGRAM) {
- pr_err("clock: DPLL4 cannot change rate due to silicon 'Limitation 2.5' on 3430ES1.\n");
- return -EINVAL;
- }
-
- return omap3_noncore_dpll_set_rate(hw, rate, parent_rate);
-}
-
-/**
- * omap3_dpll4_set_rate_and_parent - set rate and parent for omap3 per-dpll
- * @hw: clock to change
- * @rate: target rate for clock
- * @parent_rate: rate of the parent clock
- * @index: parent index, 0 - reference clock, 1 - bypass clock
- *
- * Check if the current SoC support the per-dpll reprogram operation
- * or not, and then do the rate + parent change if supported. Returns
- * -EINVAL if not supported, 0 for success, and potential error codes
- * from the clock rate change.
- */
-int omap3_dpll4_set_rate_and_parent(struct clk_hw *hw, unsigned long rate,
- unsigned long parent_rate, u8 index)
-{
- if (ti_clk_get_features()->flags & TI_CLK_DPLL4_DENY_REPROGRAM) {
- pr_err("clock: DPLL4 cannot change rate due to silicon 'Limitation 2.5' on 3430ES1.\n");
- return -EINVAL;
- }
-
- return omap3_noncore_dpll_set_rate_and_parent(hw, rate, parent_rate,
- index);
-}
-
-void __init omap3_clk_lock_dpll5(void)
-{
- struct clk *dpll5_clk;
- struct clk *dpll5_m2_clk;
-
- dpll5_clk = clk_get(NULL, "dpll5_ck");
- clk_set_rate(dpll5_clk, DPLL5_FREQ_FOR_USBHOST);
- clk_prepare_enable(dpll5_clk);
-
- /* Program dpll5_m2_clk divider for no division */
- dpll5_m2_clk = clk_get(NULL, "dpll5_m2_ck");
- clk_prepare_enable(dpll5_m2_clk);
- clk_set_rate(dpll5_m2_clk, DPLL5_FREQ_FOR_USBHOST);
-
- clk_disable_unprepare(dpll5_m2_clk);
- clk_disable_unprepare(dpll5_clk);
- return;
-}
diff --git a/arch/arm/mach-omap2/dpll3xxx.c b/arch/arm/mach-omap2/dpll3xxx.c
deleted file mode 100644
index 9a80f59..0000000
--- a/arch/arm/mach-omap2/dpll3xxx.c
+++ /dev/null
@@ -1,818 +0,0 @@
-/*
- * OMAP3/4 - specific DPLL control functions
- *
- * Copyright (C) 2009-2010 Texas Instruments, Inc.
- * Copyright (C) 2009-2010 Nokia Corporation
- *
- * Written by Paul Walmsley
- * Testing and integration fixes by Jouni Högander
- *
- * 36xx support added by Vishwanath BS, Richard Woodruff, and Nishanth
- * Menon
- *
- * Parts of this code are based on code written by
- * Richard Woodruff, Tony Lindgren, Tuukka Tikkanen, Karthik Dasu
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/device.h>
-#include <linux/list.h>
-#include <linux/errno.h>
-#include <linux/delay.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-#include <linux/bitops.h>
-#include <linux/clkdev.h>
-
-#include "clockdomain.h"
-#include "clock.h"
-
-/* CM_AUTOIDLE_PLL*.AUTO_* bit values */
-#define DPLL_AUTOIDLE_DISABLE 0x0
-#define DPLL_AUTOIDLE_LOW_POWER_STOP 0x1
-
-#define MAX_DPLL_WAIT_TRIES 1000000
-
-/* Private functions */
-
-/* _omap3_dpll_write_clken - write clken_bits arg to a DPLL's enable bits */
-static void _omap3_dpll_write_clken(struct clk_hw_omap *clk, u8 clken_bits)
-{
- const struct dpll_data *dd;
- u32 v;
-
- dd = clk->dpll_data;
-
- v = omap2_clk_readl(clk, dd->control_reg);
- v &= ~dd->enable_mask;
- v |= clken_bits << __ffs(dd->enable_mask);
- omap2_clk_writel(v, clk, dd->control_reg);
-}
-
-/* _omap3_wait_dpll_status: wait for a DPLL to enter a specific state */
-static int _omap3_wait_dpll_status(struct clk_hw_omap *clk, u8 state)
-{
- const struct dpll_data *dd;
- int i = 0;
- int ret = -EINVAL;
- const char *clk_name;
-
- dd = clk->dpll_data;
- clk_name = __clk_get_name(clk->hw.clk);
-
- state <<= __ffs(dd->idlest_mask);
-
- while (((omap2_clk_readl(clk, dd->idlest_reg) & dd->idlest_mask)
- != state) && i < MAX_DPLL_WAIT_TRIES) {
- i++;
- udelay(1);
- }
-
- if (i == MAX_DPLL_WAIT_TRIES) {
- printk(KERN_ERR "clock: %s failed transition to '%s'\n",
- clk_name, (state) ? "locked" : "bypassed");
- } else {
- pr_debug("clock: %s transition to '%s' in %d loops\n",
- clk_name, (state) ? "locked" : "bypassed", i);
-
- ret = 0;
- }
-
- return ret;
-}
-
-/* From 3430 TRM ES2 4.7.6.2 */
-static u16 _omap3_dpll_compute_freqsel(struct clk_hw_omap *clk, u8 n)
-{
- unsigned long fint;
- u16 f = 0;
-
- fint = __clk_get_rate(clk->dpll_data->clk_ref) / n;
-
- pr_debug("clock: fint is %lu\n", fint);
-
- if (fint >= 750000 && fint <= 1000000)
- f = 0x3;
- else if (fint > 1000000 && fint <= 1250000)
- f = 0x4;
- else if (fint > 1250000 && fint <= 1500000)
- f = 0x5;
- else if (fint > 1500000 && fint <= 1750000)
- f = 0x6;
- else if (fint > 1750000 && fint <= 2100000)
- f = 0x7;
- else if (fint > 7500000 && fint <= 10000000)
- f = 0xB;
- else if (fint > 10000000 && fint <= 12500000)
- f = 0xC;
- else if (fint > 12500000 && fint <= 15000000)
- f = 0xD;
- else if (fint > 15000000 && fint <= 17500000)
- f = 0xE;
- else if (fint > 17500000 && fint <= 21000000)
- f = 0xF;
- else
- pr_debug("clock: unknown freqsel setting for %d\n", n);
-
- return f;
-}
-
-/*
- * _omap3_noncore_dpll_lock - instruct a DPLL to lock and wait for readiness
- * @clk: pointer to a DPLL struct clk
- *
- * Instructs a non-CORE DPLL to lock. Waits for the DPLL to report
- * readiness before returning. Will save and restore the DPLL's
- * autoidle state across the enable, per the CDP code. If the DPLL
- * locked successfully, return 0; if the DPLL did not lock in the time
- * allotted, or DPLL3 was passed in, return -EINVAL.
- */
-static int _omap3_noncore_dpll_lock(struct clk_hw_omap *clk)
-{
- const struct dpll_data *dd;
- u8 ai;
- u8 state = 1;
- int r = 0;
-
- pr_debug("clock: locking DPLL %s\n", __clk_get_name(clk->hw.clk));
-
- dd = clk->dpll_data;
- state <<= __ffs(dd->idlest_mask);
-
- /* Check if already locked */
- if ((omap2_clk_readl(clk, dd->idlest_reg) & dd->idlest_mask) == state)
- goto done;
-
- ai = omap3_dpll_autoidle_read(clk);
-
- if (ai)
- omap3_dpll_deny_idle(clk);
-
- _omap3_dpll_write_clken(clk, DPLL_LOCKED);
-
- r = _omap3_wait_dpll_status(clk, 1);
-
- if (ai)
- omap3_dpll_allow_idle(clk);
-
-done:
- return r;
-}
-
-/*
- * _omap3_noncore_dpll_bypass - instruct a DPLL to bypass and wait for readiness
- * @clk: pointer to a DPLL struct clk
- *
- * Instructs a non-CORE DPLL to enter low-power bypass mode. In
- * bypass mode, the DPLL's rate is set equal to its parent clock's
- * rate. Waits for the DPLL to report readiness before returning.
- * Will save and restore the DPLL's autoidle state across the enable,
- * per the CDP code. If the DPLL entered bypass mode successfully,
- * return 0; if the DPLL did not enter bypass in the time allotted, or
- * DPLL3 was passed in, or the DPLL does not support low-power bypass,
- * return -EINVAL.
- */
-static int _omap3_noncore_dpll_bypass(struct clk_hw_omap *clk)
-{
- int r;
- u8 ai;
-
- if (!(clk->dpll_data->modes & (1 << DPLL_LOW_POWER_BYPASS)))
- return -EINVAL;
-
- pr_debug("clock: configuring DPLL %s for low-power bypass\n",
- __clk_get_name(clk->hw.clk));
-
- ai = omap3_dpll_autoidle_read(clk);
-
- _omap3_dpll_write_clken(clk, DPLL_LOW_POWER_BYPASS);
-
- r = _omap3_wait_dpll_status(clk, 0);
-
- if (ai)
- omap3_dpll_allow_idle(clk);
-
- return r;
-}
-
-/*
- * _omap3_noncore_dpll_stop - instruct a DPLL to stop
- * @clk: pointer to a DPLL struct clk
- *
- * Instructs a non-CORE DPLL to enter low-power stop. Will save and
- * restore the DPLL's autoidle state across the stop, per the CDP
- * code. If DPLL3 was passed in, or the DPLL does not support
- * low-power stop, return -EINVAL; otherwise, return 0.
- */
-static int _omap3_noncore_dpll_stop(struct clk_hw_omap *clk)
-{
- u8 ai;
-
- if (!(clk->dpll_data->modes & (1 << DPLL_LOW_POWER_STOP)))
- return -EINVAL;
-
- pr_debug("clock: stopping DPLL %s\n", __clk_get_name(clk->hw.clk));
-
- ai = omap3_dpll_autoidle_read(clk);
-
- _omap3_dpll_write_clken(clk, DPLL_LOW_POWER_STOP);
-
- if (ai)
- omap3_dpll_allow_idle(clk);
-
- return 0;
-}
-
-/**
- * _lookup_dco - Lookup DCO used by j-type DPLL
- * @clk: pointer to a DPLL struct clk
- * @dco: digital control oscillator selector
- * @m: DPLL multiplier to set
- * @n: DPLL divider to set
- *
- * See 36xx TRM section 3.5.3.3.3.2 "Type B DPLL (Low-Jitter)"
- *
- * XXX This code is not needed for 3430/AM35xx; can it be optimized
- * out in non-multi-OMAP builds for those chips?
- */
-static void _lookup_dco(struct clk_hw_omap *clk, u8 *dco, u16 m, u8 n)
-{
- unsigned long fint, clkinp; /* watch out for overflow */
-
- clkinp = __clk_get_rate(__clk_get_parent(clk->hw.clk));
- fint = (clkinp / n) * m;
-
- if (fint < 1000000000)
- *dco = 2;
- else
- *dco = 4;
-}
-
-/**
- * _lookup_sddiv - Calculate sigma delta divider for j-type DPLL
- * @clk: pointer to a DPLL struct clk
- * @sd_div: target sigma-delta divider
- * @m: DPLL multiplier to set
- * @n: DPLL divider to set
- *
- * See 36xx TRM section 3.5.3.3.3.2 "Type B DPLL (Low-Jitter)"
- *
- * XXX This code is not needed for 3430/AM35xx; can it be optimized
- * out in non-multi-OMAP builds for those chips?
- */
-static void _lookup_sddiv(struct clk_hw_omap *clk, u8 *sd_div, u16 m, u8 n)
-{
- unsigned long clkinp, sd; /* watch out for overflow */
- int mod1, mod2;
-
- clkinp = __clk_get_rate(__clk_get_parent(clk->hw.clk));
-
- /*
- * target sigma-delta to near 250MHz
- * sd = ceil[(m/(n+1)) * (clkinp_MHz / 250)]
- */
- clkinp /= 100000; /* shift from MHz to 10*Hz for 38.4 and 19.2 */
- mod1 = (clkinp * m) % (250 * n);
- sd = (clkinp * m) / (250 * n);
- mod2 = sd % 10;
- sd /= 10;
-
- if (mod1 || mod2)
- sd++;
- *sd_div = sd;
-}
-
-/*
- * _omap3_noncore_dpll_program - set non-core DPLL M,N values directly
- * @clk: struct clk * of DPLL to set
- * @freqsel: FREQSEL value to set
- *
- * Program the DPLL with the last M, N values calculated, and wait for
- * the DPLL to lock. Returns -EINVAL upon error, or 0 upon success.
- */
-static int omap3_noncore_dpll_program(struct clk_hw_omap *clk, u16 freqsel)
-{
- struct dpll_data *dd = clk->dpll_data;
- u8 dco, sd_div;
- u32 v;
-
- /* 3430 ES2 TRM: 4.7.6.9 DPLL Programming Sequence */
- _omap3_noncore_dpll_bypass(clk);
-
- /*
- * Set jitter correction. Jitter correction applicable for OMAP343X
- * only since freqsel field is no longer present on other devices.
- */
- if (ti_clk_get_features()->flags & TI_CLK_DPLL_HAS_FREQSEL) {
- v = omap2_clk_readl(clk, dd->control_reg);
- v &= ~dd->freqsel_mask;
- v |= freqsel << __ffs(dd->freqsel_mask);
- omap2_clk_writel(v, clk, dd->control_reg);
- }
-
- /* Set DPLL multiplier, divider */
- v = omap2_clk_readl(clk, dd->mult_div1_reg);
-
- /* Handle Duty Cycle Correction */
- if (dd->dcc_mask) {
- if (dd->last_rounded_rate >= dd->dcc_rate)
- v |= dd->dcc_mask; /* Enable DCC */
- else
- v &= ~dd->dcc_mask; /* Disable DCC */
- }
-
- v &= ~(dd->mult_mask | dd->div1_mask);
- v |= dd->last_rounded_m << __ffs(dd->mult_mask);
- v |= (dd->last_rounded_n - 1) << __ffs(dd->div1_mask);
-
- /* Configure dco and sd_div for dplls that have these fields */
- if (dd->dco_mask) {
- _lookup_dco(clk, &dco, dd->last_rounded_m, dd->last_rounded_n);
- v &= ~(dd->dco_mask);
- v |= dco << __ffs(dd->dco_mask);
- }
- if (dd->sddiv_mask) {
- _lookup_sddiv(clk, &sd_div, dd->last_rounded_m,
- dd->last_rounded_n);
- v &= ~(dd->sddiv_mask);
- v |= sd_div << __ffs(dd->sddiv_mask);
- }
-
- omap2_clk_writel(v, clk, dd->mult_div1_reg);
-
- /* Set 4X multiplier and low-power mode */
- if (dd->m4xen_mask || dd->lpmode_mask) {
- v = omap2_clk_readl(clk, dd->control_reg);
-
- if (dd->m4xen_mask) {
- if (dd->last_rounded_m4xen)
- v |= dd->m4xen_mask;
- else
- v &= ~dd->m4xen_mask;
- }
-
- if (dd->lpmode_mask) {
- if (dd->last_rounded_lpmode)
- v |= dd->lpmode_mask;
- else
- v &= ~dd->lpmode_mask;
- }
-
- omap2_clk_writel(v, clk, dd->control_reg);
- }
-
- /* We let the clock framework set the other output dividers later */
-
- /* REVISIT: Set ramp-up delay? */
-
- _omap3_noncore_dpll_lock(clk);
-
- return 0;
-}
-
-/* Public functions */
-
-/**
- * omap3_dpll_recalc - recalculate DPLL rate
- * @clk: DPLL struct clk
- *
- * Recalculate and propagate the DPLL rate.
- */
-unsigned long omap3_dpll_recalc(struct clk_hw *hw, unsigned long parent_rate)
-{
- struct clk_hw_omap *clk = to_clk_hw_omap(hw);
-
- return omap2_get_dpll_rate(clk);
-}
-
-/* Non-CORE DPLL (e.g., DPLLs that do not control SDRC) clock functions */
-
-/**
- * omap3_noncore_dpll_enable - instruct a DPLL to enter bypass or lock mode
- * @clk: pointer to a DPLL struct clk
- *
- * Instructs a non-CORE DPLL to enable, e.g., to enter bypass or lock.
- * The choice of modes depends on the DPLL's programmed rate: if it is
- * the same as the DPLL's parent clock, it will enter bypass;
- * otherwise, it will enter lock. This code will wait for the DPLL to
- * indicate readiness before returning, unless the DPLL takes too long
- * to enter the target state. Intended to be used as the struct clk's
- * enable function. If DPLL3 was passed in, or the DPLL does not
- * support low-power stop, or if the DPLL took too long to enter
- * bypass or lock, return -EINVAL; otherwise, return 0.
- */
-int omap3_noncore_dpll_enable(struct clk_hw *hw)
-{
- struct clk_hw_omap *clk = to_clk_hw_omap(hw);
- int r;
- struct dpll_data *dd;
- struct clk_hw *parent;
-
- dd = clk->dpll_data;
- if (!dd)
- return -EINVAL;
-
- if (clk->clkdm) {
- r = clkdm_clk_enable(clk->clkdm, hw->clk);
- if (r) {
- WARN(1,
- "%s: could not enable %s's clockdomain %s: %d\n",
- __func__, __clk_get_name(hw->clk),
- clk->clkdm->name, r);
- return r;
- }
- }
-
- parent = __clk_get_hw(__clk_get_parent(hw->clk));
-
- if (__clk_get_rate(hw->clk) == __clk_get_rate(dd->clk_bypass)) {
- WARN_ON(parent != __clk_get_hw(dd->clk_bypass));
- r = _omap3_noncore_dpll_bypass(clk);
- } else {
- WARN_ON(parent != __clk_get_hw(dd->clk_ref));
- r = _omap3_noncore_dpll_lock(clk);
- }
-
- return r;
-}
-
-/**
- * omap3_noncore_dpll_disable - instruct a DPLL to enter low-power stop
- * @clk: pointer to a DPLL struct clk
- *
- * Instructs a non-CORE DPLL to enter low-power stop. This function is
- * intended for use in struct clkops. No return value.
- */
-void omap3_noncore_dpll_disable(struct clk_hw *hw)
-{
- struct clk_hw_omap *clk = to_clk_hw_omap(hw);
-
- _omap3_noncore_dpll_stop(clk);
- if (clk->clkdm)
- clkdm_clk_disable(clk->clkdm, hw->clk);
-}
-
-
-/* Non-CORE DPLL rate set code */
-
-/**
- * omap3_noncore_dpll_determine_rate - determine rate for a DPLL
- * @hw: pointer to the clock to determine rate for
- * @rate: target rate for the DPLL
- * @best_parent_rate: pointer for returning best parent rate
- * @best_parent_clk: pointer for returning best parent clock
- *
- * Determines which DPLL mode to use for reaching a desired target rate.
- * Checks whether the DPLL shall be in bypass or locked mode, and if
- * locked, calculates the M,N values for the DPLL via round-rate.
- * Returns a positive clock rate with success, negative error value
- * in failure.
- */
-long omap3_noncore_dpll_determine_rate(struct clk_hw *hw, unsigned long rate,
- unsigned long min_rate,
- unsigned long max_rate,
- unsigned long *best_parent_rate,
- struct clk_hw **best_parent_clk)
-{
- struct clk_hw_omap *clk = to_clk_hw_omap(hw);
- struct dpll_data *dd;
-
- if (!hw || !rate)
- return -EINVAL;
-
- dd = clk->dpll_data;
- if (!dd)
- return -EINVAL;
-
- if (__clk_get_rate(dd->clk_bypass) == rate &&
- (dd->modes & (1 << DPLL_LOW_POWER_BYPASS))) {
- *best_parent_clk = __clk_get_hw(dd->clk_bypass);
- } else {
- rate = omap2_dpll_round_rate(hw, rate, best_parent_rate);
- *best_parent_clk = __clk_get_hw(dd->clk_ref);
- }
-
- *best_parent_rate = rate;
-
- return rate;
-}
-
-/**
- * omap3_noncore_dpll_set_parent - set parent for a DPLL clock
- * @hw: pointer to the clock to set parent for
- * @index: parent index to select
- *
- * Sets parent for a DPLL clock. This sets the DPLL into bypass or
- * locked mode. Returns 0 with success, negative error value otherwise.
- */
-int omap3_noncore_dpll_set_parent(struct clk_hw *hw, u8 index)
-{
- struct clk_hw_omap *clk = to_clk_hw_omap(hw);
- int ret;
-
- if (!hw)
- return -EINVAL;
-
- if (index)
- ret = _omap3_noncore_dpll_bypass(clk);
- else
- ret = _omap3_noncore_dpll_lock(clk);
-
- return ret;
-}
-
-/**
- * omap3_noncore_dpll_set_rate - set rate for a DPLL clock
- * @hw: pointer to the clock to set parent for
- * @rate: target rate for the clock
- * @parent_rate: rate of the parent clock
- *
- * Sets rate for a DPLL clock. First checks if the clock parent is
- * reference clock (in bypass mode, the rate of the clock can't be
- * changed) and proceeds with the rate change operation. Returns 0
- * with success, negative error value otherwise.
- */
-int omap3_noncore_dpll_set_rate(struct clk_hw *hw, unsigned long rate,
- unsigned long parent_rate)
-{
- struct clk_hw_omap *clk = to_clk_hw_omap(hw);
- struct dpll_data *dd;
- u16 freqsel = 0;
- int ret;
-
- if (!hw || !rate)
- return -EINVAL;
-
- dd = clk->dpll_data;
- if (!dd)
- return -EINVAL;
-
- if (__clk_get_hw(__clk_get_parent(hw->clk)) !=
- __clk_get_hw(dd->clk_ref))
- return -EINVAL;
-
- if (dd->last_rounded_rate == 0)
- return -EINVAL;
-
- /* Freqsel is available only on OMAP343X devices */
- if (ti_clk_get_features()->flags & TI_CLK_DPLL_HAS_FREQSEL) {
- freqsel = _omap3_dpll_compute_freqsel(clk, dd->last_rounded_n);
- WARN_ON(!freqsel);
- }
-
- pr_debug("%s: %s: set rate: locking rate to %lu.\n", __func__,
- __clk_get_name(hw->clk), rate);
-
- ret = omap3_noncore_dpll_program(clk, freqsel);
-
- return ret;
-}
-
-/**
- * omap3_noncore_dpll_set_rate_and_parent - set rate and parent for a DPLL clock
- * @hw: pointer to the clock to set rate and parent for
- * @rate: target rate for the DPLL
- * @parent_rate: clock rate of the DPLL parent
- * @index: new parent index for the DPLL, 0 - reference, 1 - bypass
- *
- * Sets rate and parent for a DPLL clock. If new parent is the bypass
- * clock, only selects the parent. Otherwise proceeds with a rate
- * change, as this will effectively also change the parent as the
- * DPLL is put into locked mode. Returns 0 with success, negative error
- * value otherwise.
- */
-int omap3_noncore_dpll_set_rate_and_parent(struct clk_hw *hw,
- unsigned long rate,
- unsigned long parent_rate,
- u8 index)
-{
- int ret;
-
- if (!hw || !rate)
- return -EINVAL;
-
- /*
- * clk-ref at index[0], in which case we only need to set rate,
- * the parent will be changed automatically with the lock sequence.
- * With clk-bypass case we only need to change parent.
- */
- if (index)
- ret = omap3_noncore_dpll_set_parent(hw, index);
- else
- ret = omap3_noncore_dpll_set_rate(hw, rate, parent_rate);
-
- return ret;
-}
-
-/* DPLL autoidle read/set code */
-
-/**
- * omap3_dpll_autoidle_read - read a DPLL's autoidle bits
- * @clk: struct clk * of the DPLL to read
- *
- * Return the DPLL's autoidle bits, shifted down to bit 0. Returns
- * -EINVAL if passed a null pointer or if the struct clk does not
- * appear to refer to a DPLL.
- */
-u32 omap3_dpll_autoidle_read(struct clk_hw_omap *clk)
-{
- const struct dpll_data *dd;
- u32 v;
-
- if (!clk || !clk->dpll_data)
- return -EINVAL;
-
- dd = clk->dpll_data;
-
- if (!dd->autoidle_reg)
- return -EINVAL;
-
- v = omap2_clk_readl(clk, dd->autoidle_reg);
- v &= dd->autoidle_mask;
- v >>= __ffs(dd->autoidle_mask);
-
- return v;
-}
-
-/**
- * omap3_dpll_allow_idle - enable DPLL autoidle bits
- * @clk: struct clk * of the DPLL to operate on
- *
- * Enable DPLL automatic idle control. This automatic idle mode
- * switching takes effect only when the DPLL is locked, at least on
- * OMAP3430. The DPLL will enter low-power stop when its downstream
- * clocks are gated. No return value.
- */
-void omap3_dpll_allow_idle(struct clk_hw_omap *clk)
-{
- const struct dpll_data *dd;
- u32 v;
-
- if (!clk || !clk->dpll_data)
- return;
-
- dd = clk->dpll_data;
-
- if (!dd->autoidle_reg)
- return;
-
- /*
- * REVISIT: CORE DPLL can optionally enter low-power bypass
- * by writing 0x5 instead of 0x1. Add some mechanism to
- * optionally enter this mode.
- */
- v = omap2_clk_readl(clk, dd->autoidle_reg);
- v &= ~dd->autoidle_mask;
- v |= DPLL_AUTOIDLE_LOW_POWER_STOP << __ffs(dd->autoidle_mask);
- omap2_clk_writel(v, clk, dd->autoidle_reg);
-
-}
-
-/**
- * omap3_dpll_deny_idle - prevent DPLL from automatically idling
- * @clk: struct clk * of the DPLL to operate on
- *
- * Disable DPLL automatic idle control. No return value.
- */
-void omap3_dpll_deny_idle(struct clk_hw_omap *clk)
-{
- const struct dpll_data *dd;
- u32 v;
-
- if (!clk || !clk->dpll_data)
- return;
-
- dd = clk->dpll_data;
-
- if (!dd->autoidle_reg)
- return;
-
- v = omap2_clk_readl(clk, dd->autoidle_reg);
- v &= ~dd->autoidle_mask;
- v |= DPLL_AUTOIDLE_DISABLE << __ffs(dd->autoidle_mask);
- omap2_clk_writel(v, clk, dd->autoidle_reg);
-
-}
-
-/* Clock control for DPLL outputs */
-
-/* Find the parent DPLL for the given clkoutx2 clock */
-static struct clk_hw_omap *omap3_find_clkoutx2_dpll(struct clk_hw *hw)
-{
- struct clk_hw_omap *pclk = NULL;
- struct clk *parent;
-
- /* Walk up the parents of clk, looking for a DPLL */
- do {
- do {
- parent = __clk_get_parent(hw->clk);
- hw = __clk_get_hw(parent);
- } while (hw && (__clk_get_flags(hw->clk) & CLK_IS_BASIC));
- if (!hw)
- break;
- pclk = to_clk_hw_omap(hw);
- } while (pclk && !pclk->dpll_data);
-
- /* clk does not have a DPLL as a parent? error in the clock data */
- if (!pclk) {
- WARN_ON(1);
- return NULL;
- }
-
- return pclk;
-}
-
-/**
- * omap3_clkoutx2_recalc - recalculate DPLL X2 output virtual clock rate
- * @clk: DPLL output struct clk
- *
- * Using parent clock DPLL data, look up DPLL state. If locked, set our
- * rate to the dpll_clk * 2; otherwise, just use dpll_clk.
- */
-unsigned long omap3_clkoutx2_recalc(struct clk_hw *hw,
- unsigned long parent_rate)
-{
- const struct dpll_data *dd;
- unsigned long rate;
- u32 v;
- struct clk_hw_omap *pclk = NULL;
-
- if (!parent_rate)
- return 0;
-
- pclk = omap3_find_clkoutx2_dpll(hw);
-
- if (!pclk)
- return 0;
-
- dd = pclk->dpll_data;
-
- WARN_ON(!dd->enable_mask);
-
- v = omap2_clk_readl(pclk, dd->control_reg) & dd->enable_mask;
- v >>= __ffs(dd->enable_mask);
- if ((v != OMAP3XXX_EN_DPLL_LOCKED) || (dd->flags & DPLL_J_TYPE))
- rate = parent_rate;
- else
- rate = parent_rate * 2;
- return rate;
-}
-
-int omap3_clkoutx2_set_rate(struct clk_hw *hw, unsigned long rate,
- unsigned long parent_rate)
-{
- return 0;
-}
-
-long omap3_clkoutx2_round_rate(struct clk_hw *hw, unsigned long rate,
- unsigned long *prate)
-{
- const struct dpll_data *dd;
- u32 v;
- struct clk_hw_omap *pclk = NULL;
-
- if (!*prate)
- return 0;
-
- pclk = omap3_find_clkoutx2_dpll(hw);
-
- if (!pclk)
- return 0;
-
- dd = pclk->dpll_data;
-
- /* TYPE J does not have a clkoutx2 */
- if (dd->flags & DPLL_J_TYPE) {
- *prate = __clk_round_rate(__clk_get_parent(pclk->hw.clk), rate);
- return *prate;
- }
-
- WARN_ON(!dd->enable_mask);
-
- v = omap2_clk_readl(pclk, dd->control_reg) & dd->enable_mask;
- v >>= __ffs(dd->enable_mask);
-
- /* If in bypass, the rate is fixed to the bypass rate*/
- if (v != OMAP3XXX_EN_DPLL_LOCKED)
- return *prate;
-
- if (__clk_get_flags(hw->clk) & CLK_SET_RATE_PARENT) {
- unsigned long best_parent;
-
- best_parent = (rate / 2);
- *prate = __clk_round_rate(__clk_get_parent(hw->clk),
- best_parent);
- }
-
- return *prate * 2;
-}
-
-/* OMAP3/4 non-CORE DPLL clkops */
-const struct clk_hw_omap_ops clkhwops_omap3_dpll = {
- .allow_idle = omap3_dpll_allow_idle,
- .deny_idle = omap3_dpll_deny_idle,
-};
diff --git a/drivers/clk/ti/Makefile b/drivers/clk/ti/Makefile
index 23cd726..fe2cfa2 100644
--- a/drivers/clk/ti/Makefile
+++ b/drivers/clk/ti/Makefile
@@ -1,7 +1,7 @@
obj-y += clk.o autoidle.o clockdomain.o
clk-common = dpll.o composite.o divider.o gate.o \
fixed-factor.o mux.o apll.o \
- clkt_dpll.o clkt_iclk.o
+ clkt_dpll.o clkt_iclk.o dpll3xxx.o
obj-$(CONFIG_SOC_AM33XX) += $(clk-common) clk-33xx.o
obj-$(CONFIG_SOC_TI81XX) += $(clk-common) fapll.o clk-816x.o
obj-$(CONFIG_ARCH_OMAP2) += $(clk-common) interface.o clk-2xxx.o
diff --git a/drivers/clk/ti/clk-3xxx.c b/drivers/clk/ti/clk-3xxx.c
index bb3b883..5489ad8 100644
--- a/drivers/clk/ti/clk-3xxx.c
+++ b/drivers/clk/ti/clk-3xxx.c
@@ -21,6 +21,13 @@
#include "clock.h"
+/*
+ * DPLL5_FREQ_FOR_USBHOST: USBHOST and USBTLL are the only clocks
+ * that are sourced by DPLL5, and both of these require this clock
+ * to be at 120 MHz for proper operation.
+ */
+#define DPLL5_FREQ_FOR_USBHOST 120000000
+
static struct ti_dt_clk omap3xxx_clks[] = {
DT_CLK(NULL, "apb_pclk", "dummy_apb_pclk"),
DT_CLK(NULL, "omap_32k_fck", "omap_32k_fck"),
@@ -325,6 +332,30 @@ enum {
OMAP3_SOC_OMAP3630,
};
+/**
+ * omap3_clk_lock_dpll5 - locks DPLL5
+ *
+ * Locks DPLL5 to a pre-defined frequency. This is required for proper
+ * operation of USB.
+ */
+void __init omap3_clk_lock_dpll5(void)
+{
+ struct clk *dpll5_clk;
+ struct clk *dpll5_m2_clk;
+
+ dpll5_clk = clk_get(NULL, "dpll5_ck");
+ clk_set_rate(dpll5_clk, DPLL5_FREQ_FOR_USBHOST);
+ clk_prepare_enable(dpll5_clk);
+
+ /* Program dpll5_m2_clk divider for no division */
+ dpll5_m2_clk = clk_get(NULL, "dpll5_m2_ck");
+ clk_prepare_enable(dpll5_m2_clk);
+ clk_set_rate(dpll5_m2_clk, DPLL5_FREQ_FOR_USBHOST);
+
+ clk_disable_unprepare(dpll5_m2_clk);
+ clk_disable_unprepare(dpll5_clk);
+}
+
static int __init omap3xxx_dt_clk_init(int soc_type)
{
if (soc_type == OMAP3_SOC_AM35XX || soc_type == OMAP3_SOC_OMAP3630 ||
diff --git a/drivers/clk/ti/clock.h b/drivers/clk/ti/clock.h
index 4b26af8..688d9e4 100644
--- a/drivers/clk/ti/clock.h
+++ b/drivers/clk/ti/clock.h
@@ -173,11 +173,38 @@ void omap2_init_clk_hw_omap_clocks(struct clk *clk);
int of_ti_clk_autoidle_setup(struct device_node *node);
void omap2_clk_enable_init_clocks(const char **clk_names, u8 num_clocks);
+extern const struct clk_hw_omap_ops clkhwops_omap3_dpll;
extern const struct clk_hw_omap_ops clkhwops_omap4_dpllmx;
extern const struct clk_hw_omap_ops clkhwops_iclk;
extern const struct clk_hw_omap_ops clkhwops_iclk_wait;
u8 omap2_init_dpll_parent(struct clk_hw *hw);
+int omap3_noncore_dpll_enable(struct clk_hw *hw);
+void omap3_noncore_dpll_disable(struct clk_hw *hw);
+int omap3_noncore_dpll_set_parent(struct clk_hw *hw, u8 index);
+int omap3_noncore_dpll_set_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long parent_rate);
+int omap3_noncore_dpll_set_rate_and_parent(struct clk_hw *hw,
+ unsigned long rate,
+ unsigned long parent_rate,
+ u8 index);
+long omap3_noncore_dpll_determine_rate(struct clk_hw *hw,
+ unsigned long rate,
+ unsigned long min_rate,
+ unsigned long max_rate,
+ unsigned long *best_parent_rate,
+ struct clk_hw **best_parent_clk);
+long omap2_dpll_round_rate(struct clk_hw *hw, unsigned long target_rate,
+ unsigned long *parent_rate);
+unsigned long omap3_clkoutx2_recalc(struct clk_hw *hw,
+ unsigned long parent_rate);
+
+unsigned long omap3_dpll_recalc(struct clk_hw *hw, unsigned long parent_rate);
+int omap3_dpll4_set_rate(struct clk_hw *clk, unsigned long rate,
+ unsigned long parent_rate);
+int omap3_dpll4_set_rate_and_parent(struct clk_hw *hw, unsigned long rate,
+ unsigned long parent_rate, u8 index);
+void omap3_clk_lock_dpll5(void);
unsigned long omap4_dpll_regm4xen_recalc(struct clk_hw *hw,
unsigned long parent_rate);
diff --git a/drivers/clk/ti/dpll3xxx.c b/drivers/clk/ti/dpll3xxx.c
new file mode 100644
index 0000000..22d77a3
--- /dev/null
+++ b/drivers/clk/ti/dpll3xxx.c
@@ -0,0 +1,825 @@
+/*
+ * OMAP3/4 - specific DPLL control functions
+ *
+ * Copyright (C) 2009-2010 Texas Instruments, Inc.
+ * Copyright (C) 2009-2010 Nokia Corporation
+ *
+ * Written by Paul Walmsley
+ * Testing and integration fixes by Jouni Högander
+ *
+ * 36xx support added by Vishwanath BS, Richard Woodruff, and Nishanth
+ * Menon
+ *
+ * Parts of this code are based on code written by
+ * Richard Woodruff, Tony Lindgren, Tuukka Tikkanen, Karthik Dasu
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/device.h>
+#include <linux/list.h>
+#include <linux/errno.h>
+#include <linux/delay.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/bitops.h>
+#include <linux/clkdev.h>
+#include <linux/clk/ti.h>
+
+#include "clock.h"
+
+/* CM_AUTOIDLE_PLL*.AUTO_* bit values */
+#define DPLL_AUTOIDLE_DISABLE 0x0
+#define DPLL_AUTOIDLE_LOW_POWER_STOP 0x1
+
+#define MAX_DPLL_WAIT_TRIES 1000000
+
+#define OMAP3XXX_EN_DPLL_LOCKED 0x7
+
+/* Forward declarations */
+static u32 omap3_dpll_autoidle_read(struct clk_hw_omap *clk);
+static void omap3_dpll_deny_idle(struct clk_hw_omap *clk);
+static void omap3_dpll_allow_idle(struct clk_hw_omap *clk);
+
+/* Private functions */
+
+/* _omap3_dpll_write_clken - write clken_bits arg to a DPLL's enable bits */
+static void _omap3_dpll_write_clken(struct clk_hw_omap *clk, u8 clken_bits)
+{
+ const struct dpll_data *dd;
+ u32 v;
+
+ dd = clk->dpll_data;
+
+ v = ti_clk_ll_ops->clk_readl(dd->control_reg);
+ v &= ~dd->enable_mask;
+ v |= clken_bits << __ffs(dd->enable_mask);
+ ti_clk_ll_ops->clk_writel(v, dd->control_reg);
+}
+
+/* _omap3_wait_dpll_status: wait for a DPLL to enter a specific state */
+static int _omap3_wait_dpll_status(struct clk_hw_omap *clk, u8 state)
+{
+ const struct dpll_data *dd;
+ int i = 0;
+ int ret = -EINVAL;
+ const char *clk_name;
+
+ dd = clk->dpll_data;
+ clk_name = __clk_get_name(clk->hw.clk);
+
+ state <<= __ffs(dd->idlest_mask);
+
+ while (((ti_clk_ll_ops->clk_readl(dd->idlest_reg) & dd->idlest_mask)
+ != state) && i < MAX_DPLL_WAIT_TRIES) {
+ i++;
+ udelay(1);
+ }
+
+ if (i == MAX_DPLL_WAIT_TRIES) {
+ pr_err("clock: %s failed transition to '%s'\n",
+ clk_name, (state) ? "locked" : "bypassed");
+ } else {
+ pr_debug("clock: %s transition to '%s' in %d loops\n",
+ clk_name, (state) ? "locked" : "bypassed", i);
+
+ ret = 0;
+ }
+
+ return ret;
+}
+
+/* From 3430 TRM ES2 4.7.6.2 */
+static u16 _omap3_dpll_compute_freqsel(struct clk_hw_omap *clk, u8 n)
+{
+ unsigned long fint;
+ u16 f = 0;
+
+ fint = __clk_get_rate(clk->dpll_data->clk_ref) / n;
+
+ pr_debug("clock: fint is %lu\n", fint);
+
+ if (fint >= 750000 && fint <= 1000000)
+ f = 0x3;
+ else if (fint > 1000000 && fint <= 1250000)
+ f = 0x4;
+ else if (fint > 1250000 && fint <= 1500000)
+ f = 0x5;
+ else if (fint > 1500000 && fint <= 1750000)
+ f = 0x6;
+ else if (fint > 1750000 && fint <= 2100000)
+ f = 0x7;
+ else if (fint > 7500000 && fint <= 10000000)
+ f = 0xB;
+ else if (fint > 10000000 && fint <= 12500000)
+ f = 0xC;
+ else if (fint > 12500000 && fint <= 15000000)
+ f = 0xD;
+ else if (fint > 15000000 && fint <= 17500000)
+ f = 0xE;
+ else if (fint > 17500000 && fint <= 21000000)
+ f = 0xF;
+ else
+ pr_debug("clock: unknown freqsel setting for %d\n", n);
+
+ return f;
+}
+
+/*
+ * _omap3_noncore_dpll_lock - instruct a DPLL to lock and wait for readiness
+ * @clk: pointer to a DPLL struct clk
+ *
+ * Instructs a non-CORE DPLL to lock. Waits for the DPLL to report
+ * readiness before returning. Will save and restore the DPLL's
+ * autoidle state across the enable, per the CDP code. If the DPLL
+ * locked successfully, return 0; if the DPLL did not lock in the time
+ * allotted, or DPLL3 was passed in, return -EINVAL.
+ */
+static int _omap3_noncore_dpll_lock(struct clk_hw_omap *clk)
+{
+ const struct dpll_data *dd;
+ u8 ai;
+ u8 state = 1;
+ int r = 0;
+
+ pr_debug("clock: locking DPLL %s\n", __clk_get_name(clk->hw.clk));
+
+ dd = clk->dpll_data;
+ state <<= __ffs(dd->idlest_mask);
+
+ /* Check if already locked */
+ if ((ti_clk_ll_ops->clk_readl(dd->idlest_reg) & dd->idlest_mask) ==
+ state)
+ goto done;
+
+ ai = omap3_dpll_autoidle_read(clk);
+
+ if (ai)
+ omap3_dpll_deny_idle(clk);
+
+ _omap3_dpll_write_clken(clk, DPLL_LOCKED);
+
+ r = _omap3_wait_dpll_status(clk, 1);
+
+ if (ai)
+ omap3_dpll_allow_idle(clk);
+
+done:
+ return r;
+}
+
+/*
+ * _omap3_noncore_dpll_bypass - instruct a DPLL to bypass and wait for readiness
+ * @clk: pointer to a DPLL struct clk
+ *
+ * Instructs a non-CORE DPLL to enter low-power bypass mode. In
+ * bypass mode, the DPLL's rate is set equal to its parent clock's
+ * rate. Waits for the DPLL to report readiness before returning.
+ * Will save and restore the DPLL's autoidle state across the enable,
+ * per the CDP code. If the DPLL entered bypass mode successfully,
+ * return 0; if the DPLL did not enter bypass in the time allotted, or
+ * DPLL3 was passed in, or the DPLL does not support low-power bypass,
+ * return -EINVAL.
+ */
+static int _omap3_noncore_dpll_bypass(struct clk_hw_omap *clk)
+{
+ int r;
+ u8 ai;
+
+ if (!(clk->dpll_data->modes & (1 << DPLL_LOW_POWER_BYPASS)))
+ return -EINVAL;
+
+ pr_debug("clock: configuring DPLL %s for low-power bypass\n",
+ __clk_get_name(clk->hw.clk));
+
+ ai = omap3_dpll_autoidle_read(clk);
+
+ _omap3_dpll_write_clken(clk, DPLL_LOW_POWER_BYPASS);
+
+ r = _omap3_wait_dpll_status(clk, 0);
+
+ if (ai)
+ omap3_dpll_allow_idle(clk);
+
+ return r;
+}
+
+/*
+ * _omap3_noncore_dpll_stop - instruct a DPLL to stop
+ * @clk: pointer to a DPLL struct clk
+ *
+ * Instructs a non-CORE DPLL to enter low-power stop. Will save and
+ * restore the DPLL's autoidle state across the stop, per the CDP
+ * code. If DPLL3 was passed in, or the DPLL does not support
+ * low-power stop, return -EINVAL; otherwise, return 0.
+ */
+static int _omap3_noncore_dpll_stop(struct clk_hw_omap *clk)
+{
+ u8 ai;
+
+ if (!(clk->dpll_data->modes & (1 << DPLL_LOW_POWER_STOP)))
+ return -EINVAL;
+
+ pr_debug("clock: stopping DPLL %s\n", __clk_get_name(clk->hw.clk));
+
+ ai = omap3_dpll_autoidle_read(clk);
+
+ _omap3_dpll_write_clken(clk, DPLL_LOW_POWER_STOP);
+
+ if (ai)
+ omap3_dpll_allow_idle(clk);
+
+ return 0;
+}
+
+/**
+ * _lookup_dco - Lookup DCO used by j-type DPLL
+ * @clk: pointer to a DPLL struct clk
+ * @dco: digital control oscillator selector
+ * @m: DPLL multiplier to set
+ * @n: DPLL divider to set
+ *
+ * See 36xx TRM section 3.5.3.3.3.2 "Type B DPLL (Low-Jitter)"
+ *
+ * XXX This code is not needed for 3430/AM35xx; can it be optimized
+ * out in non-multi-OMAP builds for those chips?
+ */
+static void _lookup_dco(struct clk_hw_omap *clk, u8 *dco, u16 m, u8 n)
+{
+ unsigned long fint, clkinp; /* watch out for overflow */
+
+ clkinp = __clk_get_rate(__clk_get_parent(clk->hw.clk));
+ fint = (clkinp / n) * m;
+
+ if (fint < 1000000000)
+ *dco = 2;
+ else
+ *dco = 4;
+}
+
+/**
+ * _lookup_sddiv - Calculate sigma delta divider for j-type DPLL
+ * @clk: pointer to a DPLL struct clk
+ * @sd_div: target sigma-delta divider
+ * @m: DPLL multiplier to set
+ * @n: DPLL divider to set
+ *
+ * See 36xx TRM section 3.5.3.3.3.2 "Type B DPLL (Low-Jitter)"
+ *
+ * XXX This code is not needed for 3430/AM35xx; can it be optimized
+ * out in non-multi-OMAP builds for those chips?
+ */
+static void _lookup_sddiv(struct clk_hw_omap *clk, u8 *sd_div, u16 m, u8 n)
+{
+ unsigned long clkinp, sd; /* watch out for overflow */
+ int mod1, mod2;
+
+ clkinp = __clk_get_rate(__clk_get_parent(clk->hw.clk));
+
+ /*
+ * target sigma-delta to near 250MHz
+ * sd = ceil[(m/(n+1)) * (clkinp_MHz / 250)]
+ */
+ clkinp /= 100000; /* shift from MHz to 10*Hz for 38.4 and 19.2 */
+ mod1 = (clkinp * m) % (250 * n);
+ sd = (clkinp * m) / (250 * n);
+ mod2 = sd % 10;
+ sd /= 10;
+
+ if (mod1 || mod2)
+ sd++;
+ *sd_div = sd;
+}
+
+/*
+ * _omap3_noncore_dpll_program - set non-core DPLL M,N values directly
+ * @clk: struct clk * of DPLL to set
+ * @freqsel: FREQSEL value to set
+ *
+ * Program the DPLL with the last M, N values calculated, and wait for
+ * the DPLL to lock. Returns -EINVAL upon error, or 0 upon success.
+ */
+static int omap3_noncore_dpll_program(struct clk_hw_omap *clk, u16 freqsel)
+{
+ struct dpll_data *dd = clk->dpll_data;
+ u8 dco, sd_div;
+ u32 v;
+
+ /* 3430 ES2 TRM: 4.7.6.9 DPLL Programming Sequence */
+ _omap3_noncore_dpll_bypass(clk);
+
+ /*
+ * Set jitter correction. Jitter correction applicable for OMAP343X
+ * only since freqsel field is no longer present on other devices.
+ */
+ if (ti_clk_get_features()->flags & TI_CLK_DPLL_HAS_FREQSEL) {
+ v = ti_clk_ll_ops->clk_readl(dd->control_reg);
+ v &= ~dd->freqsel_mask;
+ v |= freqsel << __ffs(dd->freqsel_mask);
+ ti_clk_ll_ops->clk_writel(v, dd->control_reg);
+ }
+
+ /* Set DPLL multiplier, divider */
+ v = ti_clk_ll_ops->clk_readl(dd->mult_div1_reg);
+
+ /* Handle Duty Cycle Correction */
+ if (dd->dcc_mask) {
+ if (dd->last_rounded_rate >= dd->dcc_rate)
+ v |= dd->dcc_mask; /* Enable DCC */
+ else
+ v &= ~dd->dcc_mask; /* Disable DCC */
+ }
+
+ v &= ~(dd->mult_mask | dd->div1_mask);
+ v |= dd->last_rounded_m << __ffs(dd->mult_mask);
+ v |= (dd->last_rounded_n - 1) << __ffs(dd->div1_mask);
+
+ /* Configure dco and sd_div for dplls that have these fields */
+ if (dd->dco_mask) {
+ _lookup_dco(clk, &dco, dd->last_rounded_m, dd->last_rounded_n);
+ v &= ~(dd->dco_mask);
+ v |= dco << __ffs(dd->dco_mask);
+ }
+ if (dd->sddiv_mask) {
+ _lookup_sddiv(clk, &sd_div, dd->last_rounded_m,
+ dd->last_rounded_n);
+ v &= ~(dd->sddiv_mask);
+ v |= sd_div << __ffs(dd->sddiv_mask);
+ }
+
+ ti_clk_ll_ops->clk_writel(v, dd->mult_div1_reg);
+
+ /* Set 4X multiplier and low-power mode */
+ if (dd->m4xen_mask || dd->lpmode_mask) {
+ v = ti_clk_ll_ops->clk_readl(dd->control_reg);
+
+ if (dd->m4xen_mask) {
+ if (dd->last_rounded_m4xen)
+ v |= dd->m4xen_mask;
+ else
+ v &= ~dd->m4xen_mask;
+ }
+
+ if (dd->lpmode_mask) {
+ if (dd->last_rounded_lpmode)
+ v |= dd->lpmode_mask;
+ else
+ v &= ~dd->lpmode_mask;
+ }
+
+ ti_clk_ll_ops->clk_writel(v, dd->control_reg);
+ }
+
+ /* We let the clock framework set the other output dividers later */
+
+ /* REVISIT: Set ramp-up delay? */
+
+ _omap3_noncore_dpll_lock(clk);
+
+ return 0;
+}
+
+/* Public functions */
+
+/**
+ * omap3_dpll_recalc - recalculate DPLL rate
+ * @clk: DPLL struct clk
+ *
+ * Recalculate and propagate the DPLL rate.
+ */
+unsigned long omap3_dpll_recalc(struct clk_hw *hw, unsigned long parent_rate)
+{
+ struct clk_hw_omap *clk = to_clk_hw_omap(hw);
+
+ return omap2_get_dpll_rate(clk);
+}
+
+/* Non-CORE DPLL (e.g., DPLLs that do not control SDRC) clock functions */
+
+/**
+ * omap3_noncore_dpll_enable - instruct a DPLL to enter bypass or lock mode
+ * @clk: pointer to a DPLL struct clk
+ *
+ * Instructs a non-CORE DPLL to enable, e.g., to enter bypass or lock.
+ * The choice of modes depends on the DPLL's programmed rate: if it is
+ * the same as the DPLL's parent clock, it will enter bypass;
+ * otherwise, it will enter lock. This code will wait for the DPLL to
+ * indicate readiness before returning, unless the DPLL takes too long
+ * to enter the target state. Intended to be used as the struct clk's
+ * enable function. If DPLL3 was passed in, or the DPLL does not
+ * support low-power stop, or if the DPLL took too long to enter
+ * bypass or lock, return -EINVAL; otherwise, return 0.
+ */
+int omap3_noncore_dpll_enable(struct clk_hw *hw)
+{
+ struct clk_hw_omap *clk = to_clk_hw_omap(hw);
+ int r;
+ struct dpll_data *dd;
+ struct clk_hw *parent;
+
+ dd = clk->dpll_data;
+ if (!dd)
+ return -EINVAL;
+
+ if (clk->clkdm) {
+ r = ti_clk_ll_ops->clkdm_clk_enable(clk->clkdm, hw->clk);
+ if (r) {
+ WARN(1,
+ "%s: could not enable %s's clockdomain %s: %d\n",
+ __func__, __clk_get_name(hw->clk),
+ clk->clkdm_name, r);
+ return r;
+ }
+ }
+
+ parent = __clk_get_hw(__clk_get_parent(hw->clk));
+
+ if (__clk_get_rate(hw->clk) == __clk_get_rate(dd->clk_bypass)) {
+ WARN_ON(parent != __clk_get_hw(dd->clk_bypass));
+ r = _omap3_noncore_dpll_bypass(clk);
+ } else {
+ WARN_ON(parent != __clk_get_hw(dd->clk_ref));
+ r = _omap3_noncore_dpll_lock(clk);
+ }
+
+ return r;
+}
+
+/**
+ * omap3_noncore_dpll_disable - instruct a DPLL to enter low-power stop
+ * @clk: pointer to a DPLL struct clk
+ *
+ * Instructs a non-CORE DPLL to enter low-power stop. This function is
+ * intended for use in struct clkops. No return value.
+ */
+void omap3_noncore_dpll_disable(struct clk_hw *hw)
+{
+ struct clk_hw_omap *clk = to_clk_hw_omap(hw);
+
+ _omap3_noncore_dpll_stop(clk);
+ if (clk->clkdm)
+ ti_clk_ll_ops->clkdm_clk_disable(clk->clkdm, hw->clk);
+}
+
+/* Non-CORE DPLL rate set code */
+
+/**
+ * omap3_noncore_dpll_determine_rate - determine rate for a DPLL
+ * @hw: pointer to the clock to determine rate for
+ * @rate: target rate for the DPLL
+ * @best_parent_rate: pointer for returning best parent rate
+ * @best_parent_clk: pointer for returning best parent clock
+ *
+ * Determines which DPLL mode to use for reaching a desired target rate.
+ * Checks whether the DPLL shall be in bypass or locked mode, and if
+ * locked, calculates the M,N values for the DPLL via round-rate.
+ * Returns a positive clock rate with success, negative error value
+ * in failure.
+ */
+long omap3_noncore_dpll_determine_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long min_rate,
+ unsigned long max_rate,
+ unsigned long *best_parent_rate,
+ struct clk_hw **best_parent_clk)
+{
+ struct clk_hw_omap *clk = to_clk_hw_omap(hw);
+ struct dpll_data *dd;
+
+ if (!hw || !rate)
+ return -EINVAL;
+
+ dd = clk->dpll_data;
+ if (!dd)
+ return -EINVAL;
+
+ if (__clk_get_rate(dd->clk_bypass) == rate &&
+ (dd->modes & (1 << DPLL_LOW_POWER_BYPASS))) {
+ *best_parent_clk = __clk_get_hw(dd->clk_bypass);
+ } else {
+ rate = omap2_dpll_round_rate(hw, rate, best_parent_rate);
+ *best_parent_clk = __clk_get_hw(dd->clk_ref);
+ }
+
+ *best_parent_rate = rate;
+
+ return rate;
+}
+
+/**
+ * omap3_noncore_dpll_set_parent - set parent for a DPLL clock
+ * @hw: pointer to the clock to set parent for
+ * @index: parent index to select
+ *
+ * Sets parent for a DPLL clock. This sets the DPLL into bypass or
+ * locked mode. Returns 0 with success, negative error value otherwise.
+ */
+int omap3_noncore_dpll_set_parent(struct clk_hw *hw, u8 index)
+{
+ struct clk_hw_omap *clk = to_clk_hw_omap(hw);
+ int ret;
+
+ if (!hw)
+ return -EINVAL;
+
+ if (index)
+ ret = _omap3_noncore_dpll_bypass(clk);
+ else
+ ret = _omap3_noncore_dpll_lock(clk);
+
+ return ret;
+}
+
+/**
+ * omap3_noncore_dpll_set_rate - set rate for a DPLL clock
+ * @hw: pointer to the clock to set parent for
+ * @rate: target rate for the clock
+ * @parent_rate: rate of the parent clock
+ *
+ * Sets rate for a DPLL clock. First checks if the clock parent is
+ * reference clock (in bypass mode, the rate of the clock can't be
+ * changed) and proceeds with the rate change operation. Returns 0
+ * with success, negative error value otherwise.
+ */
+int omap3_noncore_dpll_set_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long parent_rate)
+{
+ struct clk_hw_omap *clk = to_clk_hw_omap(hw);
+ struct dpll_data *dd;
+ u16 freqsel = 0;
+ int ret;
+
+ if (!hw || !rate)
+ return -EINVAL;
+
+ dd = clk->dpll_data;
+ if (!dd)
+ return -EINVAL;
+
+ if (__clk_get_hw(__clk_get_parent(hw->clk)) !=
+ __clk_get_hw(dd->clk_ref))
+ return -EINVAL;
+
+ if (dd->last_rounded_rate == 0)
+ return -EINVAL;
+
+ /* Freqsel is available only on OMAP343X devices */
+ if (ti_clk_get_features()->flags & TI_CLK_DPLL_HAS_FREQSEL) {
+ freqsel = _omap3_dpll_compute_freqsel(clk, dd->last_rounded_n);
+ WARN_ON(!freqsel);
+ }
+
+ pr_debug("%s: %s: set rate: locking rate to %lu.\n", __func__,
+ __clk_get_name(hw->clk), rate);
+
+ ret = omap3_noncore_dpll_program(clk, freqsel);
+
+ return ret;
+}
+
+/**
+ * omap3_noncore_dpll_set_rate_and_parent - set rate and parent for a DPLL clock
+ * @hw: pointer to the clock to set rate and parent for
+ * @rate: target rate for the DPLL
+ * @parent_rate: clock rate of the DPLL parent
+ * @index: new parent index for the DPLL, 0 - reference, 1 - bypass
+ *
+ * Sets rate and parent for a DPLL clock. If new parent is the bypass
+ * clock, only selects the parent. Otherwise proceeds with a rate
+ * change, as this will effectively also change the parent as the
+ * DPLL is put into locked mode. Returns 0 with success, negative error
+ * value otherwise.
+ */
+int omap3_noncore_dpll_set_rate_and_parent(struct clk_hw *hw,
+ unsigned long rate,
+ unsigned long parent_rate,
+ u8 index)
+{
+ int ret;
+
+ if (!hw || !rate)
+ return -EINVAL;
+
+ /*
+ * clk-ref at index[0], in which case we only need to set rate,
+ * the parent will be changed automatically with the lock sequence.
+ * With clk-bypass case we only need to change parent.
+ */
+ if (index)
+ ret = omap3_noncore_dpll_set_parent(hw, index);
+ else
+ ret = omap3_noncore_dpll_set_rate(hw, rate, parent_rate);
+
+ return ret;
+}
+
+/* DPLL autoidle read/set code */
+
+/**
+ * omap3_dpll_autoidle_read - read a DPLL's autoidle bits
+ * @clk: struct clk * of the DPLL to read
+ *
+ * Return the DPLL's autoidle bits, shifted down to bit 0. Returns
+ * -EINVAL if passed a null pointer or if the struct clk does not
+ * appear to refer to a DPLL.
+ */
+static u32 omap3_dpll_autoidle_read(struct clk_hw_omap *clk)
+{
+ const struct dpll_data *dd;
+ u32 v;
+
+ if (!clk || !clk->dpll_data)
+ return -EINVAL;
+
+ dd = clk->dpll_data;
+
+ if (!dd->autoidle_reg)
+ return -EINVAL;
+
+ v = ti_clk_ll_ops->clk_readl(dd->autoidle_reg);
+ v &= dd->autoidle_mask;
+ v >>= __ffs(dd->autoidle_mask);
+
+ return v;
+}
+
+/**
+ * omap3_dpll_allow_idle - enable DPLL autoidle bits
+ * @clk: struct clk * of the DPLL to operate on
+ *
+ * Enable DPLL automatic idle control. This automatic idle mode
+ * switching takes effect only when the DPLL is locked, at least on
+ * OMAP3430. The DPLL will enter low-power stop when its downstream
+ * clocks are gated. No return value.
+ */
+static void omap3_dpll_allow_idle(struct clk_hw_omap *clk)
+{
+ const struct dpll_data *dd;
+ u32 v;
+
+ if (!clk || !clk->dpll_data)
+ return;
+
+ dd = clk->dpll_data;
+
+ if (!dd->autoidle_reg)
+ return;
+
+ /*
+ * REVISIT: CORE DPLL can optionally enter low-power bypass
+ * by writing 0x5 instead of 0x1. Add some mechanism to
+ * optionally enter this mode.
+ */
+ v = ti_clk_ll_ops->clk_readl(dd->autoidle_reg);
+ v &= ~dd->autoidle_mask;
+ v |= DPLL_AUTOIDLE_LOW_POWER_STOP << __ffs(dd->autoidle_mask);
+ ti_clk_ll_ops->clk_writel(v, dd->autoidle_reg);
+}
+
+/**
+ * omap3_dpll_deny_idle - prevent DPLL from automatically idling
+ * @clk: struct clk * of the DPLL to operate on
+ *
+ * Disable DPLL automatic idle control. No return value.
+ */
+static void omap3_dpll_deny_idle(struct clk_hw_omap *clk)
+{
+ const struct dpll_data *dd;
+ u32 v;
+
+ if (!clk || !clk->dpll_data)
+ return;
+
+ dd = clk->dpll_data;
+
+ if (!dd->autoidle_reg)
+ return;
+
+ v = ti_clk_ll_ops->clk_readl(dd->autoidle_reg);
+ v &= ~dd->autoidle_mask;
+ v |= DPLL_AUTOIDLE_DISABLE << __ffs(dd->autoidle_mask);
+ ti_clk_ll_ops->clk_writel(v, dd->autoidle_reg);
+}
+
+/* Clock control for DPLL outputs */
+
+/* Find the parent DPLL for the given clkoutx2 clock */
+static struct clk_hw_omap *omap3_find_clkoutx2_dpll(struct clk_hw *hw)
+{
+ struct clk_hw_omap *pclk = NULL;
+ struct clk *parent;
+
+ /* Walk up the parents of clk, looking for a DPLL */
+ do {
+ do {
+ parent = __clk_get_parent(hw->clk);
+ hw = __clk_get_hw(parent);
+ } while (hw && (__clk_get_flags(hw->clk) & CLK_IS_BASIC));
+ if (!hw)
+ break;
+ pclk = to_clk_hw_omap(hw);
+ } while (pclk && !pclk->dpll_data);
+
+ /* clk does not have a DPLL as a parent? error in the clock data */
+ if (!pclk) {
+ WARN_ON(1);
+ return NULL;
+ }
+
+ return pclk;
+}
+
+/**
+ * omap3_clkoutx2_recalc - recalculate DPLL X2 output virtual clock rate
+ * @clk: DPLL output struct clk
+ *
+ * Using parent clock DPLL data, look up DPLL state. If locked, set our
+ * rate to the dpll_clk * 2; otherwise, just use dpll_clk.
+ */
+unsigned long omap3_clkoutx2_recalc(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ const struct dpll_data *dd;
+ unsigned long rate;
+ u32 v;
+ struct clk_hw_omap *pclk = NULL;
+
+ if (!parent_rate)
+ return 0;
+
+ pclk = omap3_find_clkoutx2_dpll(hw);
+
+ if (!pclk)
+ return 0;
+
+ dd = pclk->dpll_data;
+
+ WARN_ON(!dd->enable_mask);
+
+ v = ti_clk_ll_ops->clk_readl(dd->control_reg) & dd->enable_mask;
+ v >>= __ffs(dd->enable_mask);
+ if ((v != OMAP3XXX_EN_DPLL_LOCKED) || (dd->flags & DPLL_J_TYPE))
+ rate = parent_rate;
+ else
+ rate = parent_rate * 2;
+ return rate;
+}
+
+/* OMAP3/4 non-CORE DPLL clkops */
+const struct clk_hw_omap_ops clkhwops_omap3_dpll = {
+ .allow_idle = omap3_dpll_allow_idle,
+ .deny_idle = omap3_dpll_deny_idle,
+};
+
+/**
+ * omap3_dpll4_set_rate - set rate for omap3 per-dpll
+ * @hw: clock to change
+ * @rate: target rate for clock
+ * @parent_rate: rate of the parent clock
+ *
+ * Check if the current SoC supports the per-dpll reprogram operation
+ * or not, and then do the rate change if supported. Returns -EINVAL
+ * if not supported, 0 for success, and potential error codes from the
+ * clock rate change.
+ */
+int omap3_dpll4_set_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long parent_rate)
+{
+ /*
+ * According to the 12-5 CDP code from TI, "Limitation 2.5"
+ * on 3430ES1 prevents us from changing DPLL multipliers or dividers
+ * on DPLL4.
+ */
+ if (ti_clk_get_features()->flags & TI_CLK_DPLL4_DENY_REPROGRAM) {
+ pr_err("clock: DPLL4 cannot change rate due to silicon 'Limitation 2.5' on 3430ES1.\n");
+ return -EINVAL;
+ }
+
+ return omap3_noncore_dpll_set_rate(hw, rate, parent_rate);
+}
+
+/**
+ * omap3_dpll4_set_rate_and_parent - set rate and parent for omap3 per-dpll
+ * @hw: clock to change
+ * @rate: target rate for clock
+ * @parent_rate: rate of the parent clock
+ * @index: parent index, 0 - reference clock, 1 - bypass clock
+ *
+ * Check if the current SoC support the per-dpll reprogram operation
+ * or not, and then do the rate + parent change if supported. Returns
+ * -EINVAL if not supported, 0 for success, and potential error codes
+ * from the clock rate change.
+ */
+int omap3_dpll4_set_rate_and_parent(struct clk_hw *hw, unsigned long rate,
+ unsigned long parent_rate, u8 index)
+{
+ if (ti_clk_get_features()->flags & TI_CLK_DPLL4_DENY_REPROGRAM) {
+ pr_err("clock: DPLL4 cannot change rate due to silicon 'Limitation 2.5' on 3430ES1.\n");
+ return -EINVAL;
+ }
+
+ return omap3_noncore_dpll_set_rate_and_parent(hw, rate, parent_rate,
+ index);
+}
diff --git a/include/linux/clk/ti.h b/include/linux/clk/ti.h
index 3ca818e..0f9d15f 100644
--- a/include/linux/clk/ti.h
+++ b/include/linux/clk/ti.h
@@ -271,41 +271,13 @@ extern const struct clk_ops ti_clk_mux_ops;
#define to_clk_hw_omap(_hw) container_of(_hw, struct clk_hw_omap, hw)
-int omap3_noncore_dpll_enable(struct clk_hw *hw);
-void omap3_noncore_dpll_disable(struct clk_hw *hw);
-int omap3_noncore_dpll_set_parent(struct clk_hw *hw, u8 index);
-int omap3_noncore_dpll_set_rate(struct clk_hw *hw, unsigned long rate,
- unsigned long parent_rate);
-int omap3_noncore_dpll_set_rate_and_parent(struct clk_hw *hw,
- unsigned long rate,
- unsigned long parent_rate,
- u8 index);
-long omap3_noncore_dpll_determine_rate(struct clk_hw *hw,
- unsigned long rate,
- unsigned long min_rate,
- unsigned long max_rate,
- unsigned long *best_parent_rate,
- struct clk_hw **best_parent_clk);
-unsigned long omap3_dpll_recalc(struct clk_hw *hw, unsigned long parent_rate);
-long omap2_dpll_round_rate(struct clk_hw *hw, unsigned long target_rate,
- unsigned long *parent_rate);
void omap2_init_clk_clkdm(struct clk_hw *clk);
-unsigned long omap3_clkoutx2_recalc(struct clk_hw *hw,
- unsigned long parent_rate);
-int omap3_clkoutx2_set_rate(struct clk_hw *hw, unsigned long rate,
- unsigned long parent_rate);
-long omap3_clkoutx2_round_rate(struct clk_hw *hw, unsigned long rate,
- unsigned long *prate);
int omap2_clkops_enable_clkdm(struct clk_hw *hw);
void omap2_clkops_disable_clkdm(struct clk_hw *hw);
int omap2_clk_disable_autoidle_all(void);
int omap2_clk_enable_autoidle_all(void);
int omap2_clk_allow_idle(struct clk *clk);
int omap2_clk_deny_idle(struct clk *clk);
-int omap3_dpll4_set_rate(struct clk_hw *clk, unsigned long rate,
- unsigned long parent_rate);
-int omap3_dpll4_set_rate_and_parent(struct clk_hw *hw, unsigned long rate,
- unsigned long parent_rate, u8 index);
int omap2_dflt_clk_enable(struct clk_hw *hw);
void omap2_dflt_clk_disable(struct clk_hw *hw);
int omap2_dflt_clk_is_enabled(struct clk_hw *hw);
@@ -317,7 +289,6 @@ void omap2_clk_dflt_find_companion(struct clk_hw_omap *clk,
void omap2_clk_dflt_find_idlest(struct clk_hw_omap *clk,
void __iomem **idlest_reg,
u8 *idlest_bit, u8 *idlest_val);
-void omap3_clk_lock_dpll5(void);
unsigned long omap2_dpllcore_recalc(struct clk_hw *hw,
unsigned long parent_rate);
int omap2_reprogram_dpllcore(struct clk_hw *clk, unsigned long rate,
@@ -365,7 +336,6 @@ struct ti_clk_features *ti_clk_get_features(void);
extern const struct clk_hw_omap_ops clkhwops_omap2xxx_dpll;
extern const struct clk_hw_omap_ops clkhwops_omap2430_i2chs_wait;
-extern const struct clk_hw_omap_ops clkhwops_omap3_dpll;
extern const struct clk_hw_omap_ops clkhwops_wait;
extern const struct clk_hw_omap_ops clkhwops_omap3430es2_dss_usbhost_wait;
extern const struct clk_hw_omap_ops clkhwops_am35xx_ipss_module_wait;
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related [flat|nested] 120+ messages in thread
* [PATCHv2 14/27] clk: ti: dpll: move omap3 DPLL functionality to clock driver
@ 2015-05-11 8:54 ` Tero Kristo
0 siblings, 0 replies; 120+ messages in thread
From: Tero Kristo @ 2015-05-11 8:54 UTC (permalink / raw)
To: linux-arm-kernel
With the legacy clock support gone, OMAP3 generic DPLL code can now be
moved over to the clock driver also. A few un-unused clkoutx2 functions
are also removed at the same time.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
---
arch/arm/mach-omap2/Makefile | 8 +-
arch/arm/mach-omap2/clock.h | 4 -
arch/arm/mach-omap2/clock3xxx.c | 77 ----
arch/arm/mach-omap2/dpll3xxx.c | 818 --------------------------------------
drivers/clk/ti/Makefile | 2 +-
drivers/clk/ti/clk-3xxx.c | 31 ++
drivers/clk/ti/clock.h | 27 ++
drivers/clk/ti/dpll3xxx.c | 825 +++++++++++++++++++++++++++++++++++++++
include/linux/clk/ti.h | 30 --
9 files changed, 886 insertions(+), 936 deletions(-)
delete mode 100644 arch/arm/mach-omap2/dpll3xxx.c
create mode 100644 drivers/clk/ti/dpll3xxx.c
diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
index bf5d71d..f9d4ccf 100644
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -189,15 +189,11 @@ obj-$(CONFIG_SOC_OMAP2430) += clock2430.o
obj-$(CONFIG_ARCH_OMAP3) += $(clock-common) clock3xxx.o
obj-$(CONFIG_ARCH_OMAP3) += clock34xx.o clkt34xx_dpll3m2.o
obj-$(CONFIG_ARCH_OMAP3) += clock3517.o
-obj-$(CONFIG_ARCH_OMAP3) += dpll3xxx.o
obj-$(CONFIG_ARCH_OMAP4) += $(clock-common)
-obj-$(CONFIG_ARCH_OMAP4) += dpll3xxx.o
-obj-$(CONFIG_SOC_AM33XX) += $(clock-common) dpll3xxx.o
+obj-$(CONFIG_SOC_AM33XX) += $(clock-common)
obj-$(CONFIG_SOC_OMAP5) += $(clock-common)
-obj-$(CONFIG_SOC_OMAP5) += dpll3xxx.o
obj-$(CONFIG_SOC_DRA7XX) += $(clock-common)
-obj-$(CONFIG_SOC_DRA7XX) += dpll3xxx.o
-obj-$(CONFIG_SOC_AM43XX) += $(clock-common) dpll3xxx.o
+obj-$(CONFIG_SOC_AM43XX) += $(clock-common)
# OMAP2 clock rate set data (old "OPP" data)
obj-$(CONFIG_SOC_OMAP2420) += opp2420_data.o
diff --git a/arch/arm/mach-omap2/clock.h b/arch/arm/mach-omap2/clock.h
index e2781b4..d60691d 100644
--- a/arch/arm/mach-omap2/clock.h
+++ b/arch/arm/mach-omap2/clock.h
@@ -180,10 +180,6 @@ struct clksel {
#define OMAP4XXX_EN_DPLL_FRBYPASS 0x6
#define OMAP4XXX_EN_DPLL_LOCKED 0x7
-u32 omap3_dpll_autoidle_read(struct clk_hw_omap *clk);
-void omap3_dpll_allow_idle(struct clk_hw_omap *clk);
-void omap3_dpll_deny_idle(struct clk_hw_omap *clk);
-
void __init omap2_clk_disable_clkdm_control(void);
void omap2_clk_print_new_rates(const char *hfclkin_ck_name,
diff --git a/arch/arm/mach-omap2/clock3xxx.c b/arch/arm/mach-omap2/clock3xxx.c
index 4bd6122..0b0e3a87 100644
--- a/arch/arm/mach-omap2/clock3xxx.c
+++ b/arch/arm/mach-omap2/clock3xxx.c
@@ -29,82 +29,5 @@
#include "cm2xxx_3xxx.h"
#include "cm-regbits-34xx.h"
-/*
- * DPLL5_FREQ_FOR_USBHOST: USBHOST and USBTLL are the only clocks
- * that are sourced by DPLL5, and both of these require this clock
- * to be at 120 MHz for proper operation.
- */
-#define DPLL5_FREQ_FOR_USBHOST 120000000
-
/* needed by omap3_core_dpll_m2_set_rate() */
struct clk *sdrc_ick_p, *arm_fck_p;
-
-/**
- * omap3_dpll4_set_rate - set rate for omap3 per-dpll
- * @hw: clock to change
- * @rate: target rate for clock
- * @parent_rate: rate of the parent clock
- *
- * Check if the current SoC supports the per-dpll reprogram operation
- * or not, and then do the rate change if supported. Returns -EINVAL
- * if not supported, 0 for success, and potential error codes from the
- * clock rate change.
- */
-int omap3_dpll4_set_rate(struct clk_hw *hw, unsigned long rate,
- unsigned long parent_rate)
-{
- /*
- * According to the 12-5 CDP code from TI, "Limitation 2.5"
- * on 3430ES1 prevents us from changing DPLL multipliers or dividers
- * on DPLL4.
- */
- if (ti_clk_get_features()->flags & TI_CLK_DPLL4_DENY_REPROGRAM) {
- pr_err("clock: DPLL4 cannot change rate due to silicon 'Limitation 2.5' on 3430ES1.\n");
- return -EINVAL;
- }
-
- return omap3_noncore_dpll_set_rate(hw, rate, parent_rate);
-}
-
-/**
- * omap3_dpll4_set_rate_and_parent - set rate and parent for omap3 per-dpll
- * @hw: clock to change
- * @rate: target rate for clock
- * @parent_rate: rate of the parent clock
- * @index: parent index, 0 - reference clock, 1 - bypass clock
- *
- * Check if the current SoC support the per-dpll reprogram operation
- * or not, and then do the rate + parent change if supported. Returns
- * -EINVAL if not supported, 0 for success, and potential error codes
- * from the clock rate change.
- */
-int omap3_dpll4_set_rate_and_parent(struct clk_hw *hw, unsigned long rate,
- unsigned long parent_rate, u8 index)
-{
- if (ti_clk_get_features()->flags & TI_CLK_DPLL4_DENY_REPROGRAM) {
- pr_err("clock: DPLL4 cannot change rate due to silicon 'Limitation 2.5' on 3430ES1.\n");
- return -EINVAL;
- }
-
- return omap3_noncore_dpll_set_rate_and_parent(hw, rate, parent_rate,
- index);
-}
-
-void __init omap3_clk_lock_dpll5(void)
-{
- struct clk *dpll5_clk;
- struct clk *dpll5_m2_clk;
-
- dpll5_clk = clk_get(NULL, "dpll5_ck");
- clk_set_rate(dpll5_clk, DPLL5_FREQ_FOR_USBHOST);
- clk_prepare_enable(dpll5_clk);
-
- /* Program dpll5_m2_clk divider for no division */
- dpll5_m2_clk = clk_get(NULL, "dpll5_m2_ck");
- clk_prepare_enable(dpll5_m2_clk);
- clk_set_rate(dpll5_m2_clk, DPLL5_FREQ_FOR_USBHOST);
-
- clk_disable_unprepare(dpll5_m2_clk);
- clk_disable_unprepare(dpll5_clk);
- return;
-}
diff --git a/arch/arm/mach-omap2/dpll3xxx.c b/arch/arm/mach-omap2/dpll3xxx.c
deleted file mode 100644
index 9a80f59..0000000
--- a/arch/arm/mach-omap2/dpll3xxx.c
+++ /dev/null
@@ -1,818 +0,0 @@
-/*
- * OMAP3/4 - specific DPLL control functions
- *
- * Copyright (C) 2009-2010 Texas Instruments, Inc.
- * Copyright (C) 2009-2010 Nokia Corporation
- *
- * Written by Paul Walmsley
- * Testing and integration fixes by Jouni H?gander
- *
- * 36xx support added by Vishwanath BS, Richard Woodruff, and Nishanth
- * Menon
- *
- * Parts of this code are based on code written by
- * Richard Woodruff, Tony Lindgren, Tuukka Tikkanen, Karthik Dasu
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/device.h>
-#include <linux/list.h>
-#include <linux/errno.h>
-#include <linux/delay.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-#include <linux/bitops.h>
-#include <linux/clkdev.h>
-
-#include "clockdomain.h"
-#include "clock.h"
-
-/* CM_AUTOIDLE_PLL*.AUTO_* bit values */
-#define DPLL_AUTOIDLE_DISABLE 0x0
-#define DPLL_AUTOIDLE_LOW_POWER_STOP 0x1
-
-#define MAX_DPLL_WAIT_TRIES 1000000
-
-/* Private functions */
-
-/* _omap3_dpll_write_clken - write clken_bits arg to a DPLL's enable bits */
-static void _omap3_dpll_write_clken(struct clk_hw_omap *clk, u8 clken_bits)
-{
- const struct dpll_data *dd;
- u32 v;
-
- dd = clk->dpll_data;
-
- v = omap2_clk_readl(clk, dd->control_reg);
- v &= ~dd->enable_mask;
- v |= clken_bits << __ffs(dd->enable_mask);
- omap2_clk_writel(v, clk, dd->control_reg);
-}
-
-/* _omap3_wait_dpll_status: wait for a DPLL to enter a specific state */
-static int _omap3_wait_dpll_status(struct clk_hw_omap *clk, u8 state)
-{
- const struct dpll_data *dd;
- int i = 0;
- int ret = -EINVAL;
- const char *clk_name;
-
- dd = clk->dpll_data;
- clk_name = __clk_get_name(clk->hw.clk);
-
- state <<= __ffs(dd->idlest_mask);
-
- while (((omap2_clk_readl(clk, dd->idlest_reg) & dd->idlest_mask)
- != state) && i < MAX_DPLL_WAIT_TRIES) {
- i++;
- udelay(1);
- }
-
- if (i == MAX_DPLL_WAIT_TRIES) {
- printk(KERN_ERR "clock: %s failed transition to '%s'\n",
- clk_name, (state) ? "locked" : "bypassed");
- } else {
- pr_debug("clock: %s transition to '%s' in %d loops\n",
- clk_name, (state) ? "locked" : "bypassed", i);
-
- ret = 0;
- }
-
- return ret;
-}
-
-/* From 3430 TRM ES2 4.7.6.2 */
-static u16 _omap3_dpll_compute_freqsel(struct clk_hw_omap *clk, u8 n)
-{
- unsigned long fint;
- u16 f = 0;
-
- fint = __clk_get_rate(clk->dpll_data->clk_ref) / n;
-
- pr_debug("clock: fint is %lu\n", fint);
-
- if (fint >= 750000 && fint <= 1000000)
- f = 0x3;
- else if (fint > 1000000 && fint <= 1250000)
- f = 0x4;
- else if (fint > 1250000 && fint <= 1500000)
- f = 0x5;
- else if (fint > 1500000 && fint <= 1750000)
- f = 0x6;
- else if (fint > 1750000 && fint <= 2100000)
- f = 0x7;
- else if (fint > 7500000 && fint <= 10000000)
- f = 0xB;
- else if (fint > 10000000 && fint <= 12500000)
- f = 0xC;
- else if (fint > 12500000 && fint <= 15000000)
- f = 0xD;
- else if (fint > 15000000 && fint <= 17500000)
- f = 0xE;
- else if (fint > 17500000 && fint <= 21000000)
- f = 0xF;
- else
- pr_debug("clock: unknown freqsel setting for %d\n", n);
-
- return f;
-}
-
-/*
- * _omap3_noncore_dpll_lock - instruct a DPLL to lock and wait for readiness
- * @clk: pointer to a DPLL struct clk
- *
- * Instructs a non-CORE DPLL to lock. Waits for the DPLL to report
- * readiness before returning. Will save and restore the DPLL's
- * autoidle state across the enable, per the CDP code. If the DPLL
- * locked successfully, return 0; if the DPLL did not lock in the time
- * allotted, or DPLL3 was passed in, return -EINVAL.
- */
-static int _omap3_noncore_dpll_lock(struct clk_hw_omap *clk)
-{
- const struct dpll_data *dd;
- u8 ai;
- u8 state = 1;
- int r = 0;
-
- pr_debug("clock: locking DPLL %s\n", __clk_get_name(clk->hw.clk));
-
- dd = clk->dpll_data;
- state <<= __ffs(dd->idlest_mask);
-
- /* Check if already locked */
- if ((omap2_clk_readl(clk, dd->idlest_reg) & dd->idlest_mask) == state)
- goto done;
-
- ai = omap3_dpll_autoidle_read(clk);
-
- if (ai)
- omap3_dpll_deny_idle(clk);
-
- _omap3_dpll_write_clken(clk, DPLL_LOCKED);
-
- r = _omap3_wait_dpll_status(clk, 1);
-
- if (ai)
- omap3_dpll_allow_idle(clk);
-
-done:
- return r;
-}
-
-/*
- * _omap3_noncore_dpll_bypass - instruct a DPLL to bypass and wait for readiness
- * @clk: pointer to a DPLL struct clk
- *
- * Instructs a non-CORE DPLL to enter low-power bypass mode. In
- * bypass mode, the DPLL's rate is set equal to its parent clock's
- * rate. Waits for the DPLL to report readiness before returning.
- * Will save and restore the DPLL's autoidle state across the enable,
- * per the CDP code. If the DPLL entered bypass mode successfully,
- * return 0; if the DPLL did not enter bypass in the time allotted, or
- * DPLL3 was passed in, or the DPLL does not support low-power bypass,
- * return -EINVAL.
- */
-static int _omap3_noncore_dpll_bypass(struct clk_hw_omap *clk)
-{
- int r;
- u8 ai;
-
- if (!(clk->dpll_data->modes & (1 << DPLL_LOW_POWER_BYPASS)))
- return -EINVAL;
-
- pr_debug("clock: configuring DPLL %s for low-power bypass\n",
- __clk_get_name(clk->hw.clk));
-
- ai = omap3_dpll_autoidle_read(clk);
-
- _omap3_dpll_write_clken(clk, DPLL_LOW_POWER_BYPASS);
-
- r = _omap3_wait_dpll_status(clk, 0);
-
- if (ai)
- omap3_dpll_allow_idle(clk);
-
- return r;
-}
-
-/*
- * _omap3_noncore_dpll_stop - instruct a DPLL to stop
- * @clk: pointer to a DPLL struct clk
- *
- * Instructs a non-CORE DPLL to enter low-power stop. Will save and
- * restore the DPLL's autoidle state across the stop, per the CDP
- * code. If DPLL3 was passed in, or the DPLL does not support
- * low-power stop, return -EINVAL; otherwise, return 0.
- */
-static int _omap3_noncore_dpll_stop(struct clk_hw_omap *clk)
-{
- u8 ai;
-
- if (!(clk->dpll_data->modes & (1 << DPLL_LOW_POWER_STOP)))
- return -EINVAL;
-
- pr_debug("clock: stopping DPLL %s\n", __clk_get_name(clk->hw.clk));
-
- ai = omap3_dpll_autoidle_read(clk);
-
- _omap3_dpll_write_clken(clk, DPLL_LOW_POWER_STOP);
-
- if (ai)
- omap3_dpll_allow_idle(clk);
-
- return 0;
-}
-
-/**
- * _lookup_dco - Lookup DCO used by j-type DPLL
- * @clk: pointer to a DPLL struct clk
- * @dco: digital control oscillator selector
- * @m: DPLL multiplier to set
- * @n: DPLL divider to set
- *
- * See 36xx TRM section 3.5.3.3.3.2 "Type B DPLL (Low-Jitter)"
- *
- * XXX This code is not needed for 3430/AM35xx; can it be optimized
- * out in non-multi-OMAP builds for those chips?
- */
-static void _lookup_dco(struct clk_hw_omap *clk, u8 *dco, u16 m, u8 n)
-{
- unsigned long fint, clkinp; /* watch out for overflow */
-
- clkinp = __clk_get_rate(__clk_get_parent(clk->hw.clk));
- fint = (clkinp / n) * m;
-
- if (fint < 1000000000)
- *dco = 2;
- else
- *dco = 4;
-}
-
-/**
- * _lookup_sddiv - Calculate sigma delta divider for j-type DPLL
- * @clk: pointer to a DPLL struct clk
- * @sd_div: target sigma-delta divider
- * @m: DPLL multiplier to set
- * @n: DPLL divider to set
- *
- * See 36xx TRM section 3.5.3.3.3.2 "Type B DPLL (Low-Jitter)"
- *
- * XXX This code is not needed for 3430/AM35xx; can it be optimized
- * out in non-multi-OMAP builds for those chips?
- */
-static void _lookup_sddiv(struct clk_hw_omap *clk, u8 *sd_div, u16 m, u8 n)
-{
- unsigned long clkinp, sd; /* watch out for overflow */
- int mod1, mod2;
-
- clkinp = __clk_get_rate(__clk_get_parent(clk->hw.clk));
-
- /*
- * target sigma-delta to near 250MHz
- * sd = ceil[(m/(n+1)) * (clkinp_MHz / 250)]
- */
- clkinp /= 100000; /* shift from MHz to 10*Hz for 38.4 and 19.2 */
- mod1 = (clkinp * m) % (250 * n);
- sd = (clkinp * m) / (250 * n);
- mod2 = sd % 10;
- sd /= 10;
-
- if (mod1 || mod2)
- sd++;
- *sd_div = sd;
-}
-
-/*
- * _omap3_noncore_dpll_program - set non-core DPLL M,N values directly
- * @clk: struct clk * of DPLL to set
- * @freqsel: FREQSEL value to set
- *
- * Program the DPLL with the last M, N values calculated, and wait for
- * the DPLL to lock. Returns -EINVAL upon error, or 0 upon success.
- */
-static int omap3_noncore_dpll_program(struct clk_hw_omap *clk, u16 freqsel)
-{
- struct dpll_data *dd = clk->dpll_data;
- u8 dco, sd_div;
- u32 v;
-
- /* 3430 ES2 TRM: 4.7.6.9 DPLL Programming Sequence */
- _omap3_noncore_dpll_bypass(clk);
-
- /*
- * Set jitter correction. Jitter correction applicable for OMAP343X
- * only since freqsel field is no longer present on other devices.
- */
- if (ti_clk_get_features()->flags & TI_CLK_DPLL_HAS_FREQSEL) {
- v = omap2_clk_readl(clk, dd->control_reg);
- v &= ~dd->freqsel_mask;
- v |= freqsel << __ffs(dd->freqsel_mask);
- omap2_clk_writel(v, clk, dd->control_reg);
- }
-
- /* Set DPLL multiplier, divider */
- v = omap2_clk_readl(clk, dd->mult_div1_reg);
-
- /* Handle Duty Cycle Correction */
- if (dd->dcc_mask) {
- if (dd->last_rounded_rate >= dd->dcc_rate)
- v |= dd->dcc_mask; /* Enable DCC */
- else
- v &= ~dd->dcc_mask; /* Disable DCC */
- }
-
- v &= ~(dd->mult_mask | dd->div1_mask);
- v |= dd->last_rounded_m << __ffs(dd->mult_mask);
- v |= (dd->last_rounded_n - 1) << __ffs(dd->div1_mask);
-
- /* Configure dco and sd_div for dplls that have these fields */
- if (dd->dco_mask) {
- _lookup_dco(clk, &dco, dd->last_rounded_m, dd->last_rounded_n);
- v &= ~(dd->dco_mask);
- v |= dco << __ffs(dd->dco_mask);
- }
- if (dd->sddiv_mask) {
- _lookup_sddiv(clk, &sd_div, dd->last_rounded_m,
- dd->last_rounded_n);
- v &= ~(dd->sddiv_mask);
- v |= sd_div << __ffs(dd->sddiv_mask);
- }
-
- omap2_clk_writel(v, clk, dd->mult_div1_reg);
-
- /* Set 4X multiplier and low-power mode */
- if (dd->m4xen_mask || dd->lpmode_mask) {
- v = omap2_clk_readl(clk, dd->control_reg);
-
- if (dd->m4xen_mask) {
- if (dd->last_rounded_m4xen)
- v |= dd->m4xen_mask;
- else
- v &= ~dd->m4xen_mask;
- }
-
- if (dd->lpmode_mask) {
- if (dd->last_rounded_lpmode)
- v |= dd->lpmode_mask;
- else
- v &= ~dd->lpmode_mask;
- }
-
- omap2_clk_writel(v, clk, dd->control_reg);
- }
-
- /* We let the clock framework set the other output dividers later */
-
- /* REVISIT: Set ramp-up delay? */
-
- _omap3_noncore_dpll_lock(clk);
-
- return 0;
-}
-
-/* Public functions */
-
-/**
- * omap3_dpll_recalc - recalculate DPLL rate
- * @clk: DPLL struct clk
- *
- * Recalculate and propagate the DPLL rate.
- */
-unsigned long omap3_dpll_recalc(struct clk_hw *hw, unsigned long parent_rate)
-{
- struct clk_hw_omap *clk = to_clk_hw_omap(hw);
-
- return omap2_get_dpll_rate(clk);
-}
-
-/* Non-CORE DPLL (e.g., DPLLs that do not control SDRC) clock functions */
-
-/**
- * omap3_noncore_dpll_enable - instruct a DPLL to enter bypass or lock mode
- * @clk: pointer to a DPLL struct clk
- *
- * Instructs a non-CORE DPLL to enable, e.g., to enter bypass or lock.
- * The choice of modes depends on the DPLL's programmed rate: if it is
- * the same as the DPLL's parent clock, it will enter bypass;
- * otherwise, it will enter lock. This code will wait for the DPLL to
- * indicate readiness before returning, unless the DPLL takes too long
- * to enter the target state. Intended to be used as the struct clk's
- * enable function. If DPLL3 was passed in, or the DPLL does not
- * support low-power stop, or if the DPLL took too long to enter
- * bypass or lock, return -EINVAL; otherwise, return 0.
- */
-int omap3_noncore_dpll_enable(struct clk_hw *hw)
-{
- struct clk_hw_omap *clk = to_clk_hw_omap(hw);
- int r;
- struct dpll_data *dd;
- struct clk_hw *parent;
-
- dd = clk->dpll_data;
- if (!dd)
- return -EINVAL;
-
- if (clk->clkdm) {
- r = clkdm_clk_enable(clk->clkdm, hw->clk);
- if (r) {
- WARN(1,
- "%s: could not enable %s's clockdomain %s: %d\n",
- __func__, __clk_get_name(hw->clk),
- clk->clkdm->name, r);
- return r;
- }
- }
-
- parent = __clk_get_hw(__clk_get_parent(hw->clk));
-
- if (__clk_get_rate(hw->clk) == __clk_get_rate(dd->clk_bypass)) {
- WARN_ON(parent != __clk_get_hw(dd->clk_bypass));
- r = _omap3_noncore_dpll_bypass(clk);
- } else {
- WARN_ON(parent != __clk_get_hw(dd->clk_ref));
- r = _omap3_noncore_dpll_lock(clk);
- }
-
- return r;
-}
-
-/**
- * omap3_noncore_dpll_disable - instruct a DPLL to enter low-power stop
- * @clk: pointer to a DPLL struct clk
- *
- * Instructs a non-CORE DPLL to enter low-power stop. This function is
- * intended for use in struct clkops. No return value.
- */
-void omap3_noncore_dpll_disable(struct clk_hw *hw)
-{
- struct clk_hw_omap *clk = to_clk_hw_omap(hw);
-
- _omap3_noncore_dpll_stop(clk);
- if (clk->clkdm)
- clkdm_clk_disable(clk->clkdm, hw->clk);
-}
-
-
-/* Non-CORE DPLL rate set code */
-
-/**
- * omap3_noncore_dpll_determine_rate - determine rate for a DPLL
- * @hw: pointer to the clock to determine rate for
- * @rate: target rate for the DPLL
- * @best_parent_rate: pointer for returning best parent rate
- * @best_parent_clk: pointer for returning best parent clock
- *
- * Determines which DPLL mode to use for reaching a desired target rate.
- * Checks whether the DPLL shall be in bypass or locked mode, and if
- * locked, calculates the M,N values for the DPLL via round-rate.
- * Returns a positive clock rate with success, negative error value
- * in failure.
- */
-long omap3_noncore_dpll_determine_rate(struct clk_hw *hw, unsigned long rate,
- unsigned long min_rate,
- unsigned long max_rate,
- unsigned long *best_parent_rate,
- struct clk_hw **best_parent_clk)
-{
- struct clk_hw_omap *clk = to_clk_hw_omap(hw);
- struct dpll_data *dd;
-
- if (!hw || !rate)
- return -EINVAL;
-
- dd = clk->dpll_data;
- if (!dd)
- return -EINVAL;
-
- if (__clk_get_rate(dd->clk_bypass) == rate &&
- (dd->modes & (1 << DPLL_LOW_POWER_BYPASS))) {
- *best_parent_clk = __clk_get_hw(dd->clk_bypass);
- } else {
- rate = omap2_dpll_round_rate(hw, rate, best_parent_rate);
- *best_parent_clk = __clk_get_hw(dd->clk_ref);
- }
-
- *best_parent_rate = rate;
-
- return rate;
-}
-
-/**
- * omap3_noncore_dpll_set_parent - set parent for a DPLL clock
- * @hw: pointer to the clock to set parent for
- * @index: parent index to select
- *
- * Sets parent for a DPLL clock. This sets the DPLL into bypass or
- * locked mode. Returns 0 with success, negative error value otherwise.
- */
-int omap3_noncore_dpll_set_parent(struct clk_hw *hw, u8 index)
-{
- struct clk_hw_omap *clk = to_clk_hw_omap(hw);
- int ret;
-
- if (!hw)
- return -EINVAL;
-
- if (index)
- ret = _omap3_noncore_dpll_bypass(clk);
- else
- ret = _omap3_noncore_dpll_lock(clk);
-
- return ret;
-}
-
-/**
- * omap3_noncore_dpll_set_rate - set rate for a DPLL clock
- * @hw: pointer to the clock to set parent for
- * @rate: target rate for the clock
- * @parent_rate: rate of the parent clock
- *
- * Sets rate for a DPLL clock. First checks if the clock parent is
- * reference clock (in bypass mode, the rate of the clock can't be
- * changed) and proceeds with the rate change operation. Returns 0
- * with success, negative error value otherwise.
- */
-int omap3_noncore_dpll_set_rate(struct clk_hw *hw, unsigned long rate,
- unsigned long parent_rate)
-{
- struct clk_hw_omap *clk = to_clk_hw_omap(hw);
- struct dpll_data *dd;
- u16 freqsel = 0;
- int ret;
-
- if (!hw || !rate)
- return -EINVAL;
-
- dd = clk->dpll_data;
- if (!dd)
- return -EINVAL;
-
- if (__clk_get_hw(__clk_get_parent(hw->clk)) !=
- __clk_get_hw(dd->clk_ref))
- return -EINVAL;
-
- if (dd->last_rounded_rate == 0)
- return -EINVAL;
-
- /* Freqsel is available only on OMAP343X devices */
- if (ti_clk_get_features()->flags & TI_CLK_DPLL_HAS_FREQSEL) {
- freqsel = _omap3_dpll_compute_freqsel(clk, dd->last_rounded_n);
- WARN_ON(!freqsel);
- }
-
- pr_debug("%s: %s: set rate: locking rate to %lu.\n", __func__,
- __clk_get_name(hw->clk), rate);
-
- ret = omap3_noncore_dpll_program(clk, freqsel);
-
- return ret;
-}
-
-/**
- * omap3_noncore_dpll_set_rate_and_parent - set rate and parent for a DPLL clock
- * @hw: pointer to the clock to set rate and parent for
- * @rate: target rate for the DPLL
- * @parent_rate: clock rate of the DPLL parent
- * @index: new parent index for the DPLL, 0 - reference, 1 - bypass
- *
- * Sets rate and parent for a DPLL clock. If new parent is the bypass
- * clock, only selects the parent. Otherwise proceeds with a rate
- * change, as this will effectively also change the parent as the
- * DPLL is put into locked mode. Returns 0 with success, negative error
- * value otherwise.
- */
-int omap3_noncore_dpll_set_rate_and_parent(struct clk_hw *hw,
- unsigned long rate,
- unsigned long parent_rate,
- u8 index)
-{
- int ret;
-
- if (!hw || !rate)
- return -EINVAL;
-
- /*
- * clk-ref at index[0], in which case we only need to set rate,
- * the parent will be changed automatically with the lock sequence.
- * With clk-bypass case we only need to change parent.
- */
- if (index)
- ret = omap3_noncore_dpll_set_parent(hw, index);
- else
- ret = omap3_noncore_dpll_set_rate(hw, rate, parent_rate);
-
- return ret;
-}
-
-/* DPLL autoidle read/set code */
-
-/**
- * omap3_dpll_autoidle_read - read a DPLL's autoidle bits
- * @clk: struct clk * of the DPLL to read
- *
- * Return the DPLL's autoidle bits, shifted down to bit 0. Returns
- * -EINVAL if passed a null pointer or if the struct clk does not
- * appear to refer to a DPLL.
- */
-u32 omap3_dpll_autoidle_read(struct clk_hw_omap *clk)
-{
- const struct dpll_data *dd;
- u32 v;
-
- if (!clk || !clk->dpll_data)
- return -EINVAL;
-
- dd = clk->dpll_data;
-
- if (!dd->autoidle_reg)
- return -EINVAL;
-
- v = omap2_clk_readl(clk, dd->autoidle_reg);
- v &= dd->autoidle_mask;
- v >>= __ffs(dd->autoidle_mask);
-
- return v;
-}
-
-/**
- * omap3_dpll_allow_idle - enable DPLL autoidle bits
- * @clk: struct clk * of the DPLL to operate on
- *
- * Enable DPLL automatic idle control. This automatic idle mode
- * switching takes effect only when the DPLL is locked, at least on
- * OMAP3430. The DPLL will enter low-power stop when its downstream
- * clocks are gated. No return value.
- */
-void omap3_dpll_allow_idle(struct clk_hw_omap *clk)
-{
- const struct dpll_data *dd;
- u32 v;
-
- if (!clk || !clk->dpll_data)
- return;
-
- dd = clk->dpll_data;
-
- if (!dd->autoidle_reg)
- return;
-
- /*
- * REVISIT: CORE DPLL can optionally enter low-power bypass
- * by writing 0x5 instead of 0x1. Add some mechanism to
- * optionally enter this mode.
- */
- v = omap2_clk_readl(clk, dd->autoidle_reg);
- v &= ~dd->autoidle_mask;
- v |= DPLL_AUTOIDLE_LOW_POWER_STOP << __ffs(dd->autoidle_mask);
- omap2_clk_writel(v, clk, dd->autoidle_reg);
-
-}
-
-/**
- * omap3_dpll_deny_idle - prevent DPLL from automatically idling
- * @clk: struct clk * of the DPLL to operate on
- *
- * Disable DPLL automatic idle control. No return value.
- */
-void omap3_dpll_deny_idle(struct clk_hw_omap *clk)
-{
- const struct dpll_data *dd;
- u32 v;
-
- if (!clk || !clk->dpll_data)
- return;
-
- dd = clk->dpll_data;
-
- if (!dd->autoidle_reg)
- return;
-
- v = omap2_clk_readl(clk, dd->autoidle_reg);
- v &= ~dd->autoidle_mask;
- v |= DPLL_AUTOIDLE_DISABLE << __ffs(dd->autoidle_mask);
- omap2_clk_writel(v, clk, dd->autoidle_reg);
-
-}
-
-/* Clock control for DPLL outputs */
-
-/* Find the parent DPLL for the given clkoutx2 clock */
-static struct clk_hw_omap *omap3_find_clkoutx2_dpll(struct clk_hw *hw)
-{
- struct clk_hw_omap *pclk = NULL;
- struct clk *parent;
-
- /* Walk up the parents of clk, looking for a DPLL */
- do {
- do {
- parent = __clk_get_parent(hw->clk);
- hw = __clk_get_hw(parent);
- } while (hw && (__clk_get_flags(hw->clk) & CLK_IS_BASIC));
- if (!hw)
- break;
- pclk = to_clk_hw_omap(hw);
- } while (pclk && !pclk->dpll_data);
-
- /* clk does not have a DPLL as a parent? error in the clock data */
- if (!pclk) {
- WARN_ON(1);
- return NULL;
- }
-
- return pclk;
-}
-
-/**
- * omap3_clkoutx2_recalc - recalculate DPLL X2 output virtual clock rate
- * @clk: DPLL output struct clk
- *
- * Using parent clock DPLL data, look up DPLL state. If locked, set our
- * rate to the dpll_clk * 2; otherwise, just use dpll_clk.
- */
-unsigned long omap3_clkoutx2_recalc(struct clk_hw *hw,
- unsigned long parent_rate)
-{
- const struct dpll_data *dd;
- unsigned long rate;
- u32 v;
- struct clk_hw_omap *pclk = NULL;
-
- if (!parent_rate)
- return 0;
-
- pclk = omap3_find_clkoutx2_dpll(hw);
-
- if (!pclk)
- return 0;
-
- dd = pclk->dpll_data;
-
- WARN_ON(!dd->enable_mask);
-
- v = omap2_clk_readl(pclk, dd->control_reg) & dd->enable_mask;
- v >>= __ffs(dd->enable_mask);
- if ((v != OMAP3XXX_EN_DPLL_LOCKED) || (dd->flags & DPLL_J_TYPE))
- rate = parent_rate;
- else
- rate = parent_rate * 2;
- return rate;
-}
-
-int omap3_clkoutx2_set_rate(struct clk_hw *hw, unsigned long rate,
- unsigned long parent_rate)
-{
- return 0;
-}
-
-long omap3_clkoutx2_round_rate(struct clk_hw *hw, unsigned long rate,
- unsigned long *prate)
-{
- const struct dpll_data *dd;
- u32 v;
- struct clk_hw_omap *pclk = NULL;
-
- if (!*prate)
- return 0;
-
- pclk = omap3_find_clkoutx2_dpll(hw);
-
- if (!pclk)
- return 0;
-
- dd = pclk->dpll_data;
-
- /* TYPE J does not have a clkoutx2 */
- if (dd->flags & DPLL_J_TYPE) {
- *prate = __clk_round_rate(__clk_get_parent(pclk->hw.clk), rate);
- return *prate;
- }
-
- WARN_ON(!dd->enable_mask);
-
- v = omap2_clk_readl(pclk, dd->control_reg) & dd->enable_mask;
- v >>= __ffs(dd->enable_mask);
-
- /* If in bypass, the rate is fixed to the bypass rate*/
- if (v != OMAP3XXX_EN_DPLL_LOCKED)
- return *prate;
-
- if (__clk_get_flags(hw->clk) & CLK_SET_RATE_PARENT) {
- unsigned long best_parent;
-
- best_parent = (rate / 2);
- *prate = __clk_round_rate(__clk_get_parent(hw->clk),
- best_parent);
- }
-
- return *prate * 2;
-}
-
-/* OMAP3/4 non-CORE DPLL clkops */
-const struct clk_hw_omap_ops clkhwops_omap3_dpll = {
- .allow_idle = omap3_dpll_allow_idle,
- .deny_idle = omap3_dpll_deny_idle,
-};
diff --git a/drivers/clk/ti/Makefile b/drivers/clk/ti/Makefile
index 23cd726..fe2cfa2 100644
--- a/drivers/clk/ti/Makefile
+++ b/drivers/clk/ti/Makefile
@@ -1,7 +1,7 @@
obj-y += clk.o autoidle.o clockdomain.o
clk-common = dpll.o composite.o divider.o gate.o \
fixed-factor.o mux.o apll.o \
- clkt_dpll.o clkt_iclk.o
+ clkt_dpll.o clkt_iclk.o dpll3xxx.o
obj-$(CONFIG_SOC_AM33XX) += $(clk-common) clk-33xx.o
obj-$(CONFIG_SOC_TI81XX) += $(clk-common) fapll.o clk-816x.o
obj-$(CONFIG_ARCH_OMAP2) += $(clk-common) interface.o clk-2xxx.o
diff --git a/drivers/clk/ti/clk-3xxx.c b/drivers/clk/ti/clk-3xxx.c
index bb3b883..5489ad8 100644
--- a/drivers/clk/ti/clk-3xxx.c
+++ b/drivers/clk/ti/clk-3xxx.c
@@ -21,6 +21,13 @@
#include "clock.h"
+/*
+ * DPLL5_FREQ_FOR_USBHOST: USBHOST and USBTLL are the only clocks
+ * that are sourced by DPLL5, and both of these require this clock
+ * to be at 120 MHz for proper operation.
+ */
+#define DPLL5_FREQ_FOR_USBHOST 120000000
+
static struct ti_dt_clk omap3xxx_clks[] = {
DT_CLK(NULL, "apb_pclk", "dummy_apb_pclk"),
DT_CLK(NULL, "omap_32k_fck", "omap_32k_fck"),
@@ -325,6 +332,30 @@ enum {
OMAP3_SOC_OMAP3630,
};
+/**
+ * omap3_clk_lock_dpll5 - locks DPLL5
+ *
+ * Locks DPLL5 to a pre-defined frequency. This is required for proper
+ * operation of USB.
+ */
+void __init omap3_clk_lock_dpll5(void)
+{
+ struct clk *dpll5_clk;
+ struct clk *dpll5_m2_clk;
+
+ dpll5_clk = clk_get(NULL, "dpll5_ck");
+ clk_set_rate(dpll5_clk, DPLL5_FREQ_FOR_USBHOST);
+ clk_prepare_enable(dpll5_clk);
+
+ /* Program dpll5_m2_clk divider for no division */
+ dpll5_m2_clk = clk_get(NULL, "dpll5_m2_ck");
+ clk_prepare_enable(dpll5_m2_clk);
+ clk_set_rate(dpll5_m2_clk, DPLL5_FREQ_FOR_USBHOST);
+
+ clk_disable_unprepare(dpll5_m2_clk);
+ clk_disable_unprepare(dpll5_clk);
+}
+
static int __init omap3xxx_dt_clk_init(int soc_type)
{
if (soc_type == OMAP3_SOC_AM35XX || soc_type == OMAP3_SOC_OMAP3630 ||
diff --git a/drivers/clk/ti/clock.h b/drivers/clk/ti/clock.h
index 4b26af8..688d9e4 100644
--- a/drivers/clk/ti/clock.h
+++ b/drivers/clk/ti/clock.h
@@ -173,11 +173,38 @@ void omap2_init_clk_hw_omap_clocks(struct clk *clk);
int of_ti_clk_autoidle_setup(struct device_node *node);
void omap2_clk_enable_init_clocks(const char **clk_names, u8 num_clocks);
+extern const struct clk_hw_omap_ops clkhwops_omap3_dpll;
extern const struct clk_hw_omap_ops clkhwops_omap4_dpllmx;
extern const struct clk_hw_omap_ops clkhwops_iclk;
extern const struct clk_hw_omap_ops clkhwops_iclk_wait;
u8 omap2_init_dpll_parent(struct clk_hw *hw);
+int omap3_noncore_dpll_enable(struct clk_hw *hw);
+void omap3_noncore_dpll_disable(struct clk_hw *hw);
+int omap3_noncore_dpll_set_parent(struct clk_hw *hw, u8 index);
+int omap3_noncore_dpll_set_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long parent_rate);
+int omap3_noncore_dpll_set_rate_and_parent(struct clk_hw *hw,
+ unsigned long rate,
+ unsigned long parent_rate,
+ u8 index);
+long omap3_noncore_dpll_determine_rate(struct clk_hw *hw,
+ unsigned long rate,
+ unsigned long min_rate,
+ unsigned long max_rate,
+ unsigned long *best_parent_rate,
+ struct clk_hw **best_parent_clk);
+long omap2_dpll_round_rate(struct clk_hw *hw, unsigned long target_rate,
+ unsigned long *parent_rate);
+unsigned long omap3_clkoutx2_recalc(struct clk_hw *hw,
+ unsigned long parent_rate);
+
+unsigned long omap3_dpll_recalc(struct clk_hw *hw, unsigned long parent_rate);
+int omap3_dpll4_set_rate(struct clk_hw *clk, unsigned long rate,
+ unsigned long parent_rate);
+int omap3_dpll4_set_rate_and_parent(struct clk_hw *hw, unsigned long rate,
+ unsigned long parent_rate, u8 index);
+void omap3_clk_lock_dpll5(void);
unsigned long omap4_dpll_regm4xen_recalc(struct clk_hw *hw,
unsigned long parent_rate);
diff --git a/drivers/clk/ti/dpll3xxx.c b/drivers/clk/ti/dpll3xxx.c
new file mode 100644
index 0000000..22d77a3
--- /dev/null
+++ b/drivers/clk/ti/dpll3xxx.c
@@ -0,0 +1,825 @@
+/*
+ * OMAP3/4 - specific DPLL control functions
+ *
+ * Copyright (C) 2009-2010 Texas Instruments, Inc.
+ * Copyright (C) 2009-2010 Nokia Corporation
+ *
+ * Written by Paul Walmsley
+ * Testing and integration fixes by Jouni H?gander
+ *
+ * 36xx support added by Vishwanath BS, Richard Woodruff, and Nishanth
+ * Menon
+ *
+ * Parts of this code are based on code written by
+ * Richard Woodruff, Tony Lindgren, Tuukka Tikkanen, Karthik Dasu
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/device.h>
+#include <linux/list.h>
+#include <linux/errno.h>
+#include <linux/delay.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/bitops.h>
+#include <linux/clkdev.h>
+#include <linux/clk/ti.h>
+
+#include "clock.h"
+
+/* CM_AUTOIDLE_PLL*.AUTO_* bit values */
+#define DPLL_AUTOIDLE_DISABLE 0x0
+#define DPLL_AUTOIDLE_LOW_POWER_STOP 0x1
+
+#define MAX_DPLL_WAIT_TRIES 1000000
+
+#define OMAP3XXX_EN_DPLL_LOCKED 0x7
+
+/* Forward declarations */
+static u32 omap3_dpll_autoidle_read(struct clk_hw_omap *clk);
+static void omap3_dpll_deny_idle(struct clk_hw_omap *clk);
+static void omap3_dpll_allow_idle(struct clk_hw_omap *clk);
+
+/* Private functions */
+
+/* _omap3_dpll_write_clken - write clken_bits arg to a DPLL's enable bits */
+static void _omap3_dpll_write_clken(struct clk_hw_omap *clk, u8 clken_bits)
+{
+ const struct dpll_data *dd;
+ u32 v;
+
+ dd = clk->dpll_data;
+
+ v = ti_clk_ll_ops->clk_readl(dd->control_reg);
+ v &= ~dd->enable_mask;
+ v |= clken_bits << __ffs(dd->enable_mask);
+ ti_clk_ll_ops->clk_writel(v, dd->control_reg);
+}
+
+/* _omap3_wait_dpll_status: wait for a DPLL to enter a specific state */
+static int _omap3_wait_dpll_status(struct clk_hw_omap *clk, u8 state)
+{
+ const struct dpll_data *dd;
+ int i = 0;
+ int ret = -EINVAL;
+ const char *clk_name;
+
+ dd = clk->dpll_data;
+ clk_name = __clk_get_name(clk->hw.clk);
+
+ state <<= __ffs(dd->idlest_mask);
+
+ while (((ti_clk_ll_ops->clk_readl(dd->idlest_reg) & dd->idlest_mask)
+ != state) && i < MAX_DPLL_WAIT_TRIES) {
+ i++;
+ udelay(1);
+ }
+
+ if (i == MAX_DPLL_WAIT_TRIES) {
+ pr_err("clock: %s failed transition to '%s'\n",
+ clk_name, (state) ? "locked" : "bypassed");
+ } else {
+ pr_debug("clock: %s transition to '%s' in %d loops\n",
+ clk_name, (state) ? "locked" : "bypassed", i);
+
+ ret = 0;
+ }
+
+ return ret;
+}
+
+/* From 3430 TRM ES2 4.7.6.2 */
+static u16 _omap3_dpll_compute_freqsel(struct clk_hw_omap *clk, u8 n)
+{
+ unsigned long fint;
+ u16 f = 0;
+
+ fint = __clk_get_rate(clk->dpll_data->clk_ref) / n;
+
+ pr_debug("clock: fint is %lu\n", fint);
+
+ if (fint >= 750000 && fint <= 1000000)
+ f = 0x3;
+ else if (fint > 1000000 && fint <= 1250000)
+ f = 0x4;
+ else if (fint > 1250000 && fint <= 1500000)
+ f = 0x5;
+ else if (fint > 1500000 && fint <= 1750000)
+ f = 0x6;
+ else if (fint > 1750000 && fint <= 2100000)
+ f = 0x7;
+ else if (fint > 7500000 && fint <= 10000000)
+ f = 0xB;
+ else if (fint > 10000000 && fint <= 12500000)
+ f = 0xC;
+ else if (fint > 12500000 && fint <= 15000000)
+ f = 0xD;
+ else if (fint > 15000000 && fint <= 17500000)
+ f = 0xE;
+ else if (fint > 17500000 && fint <= 21000000)
+ f = 0xF;
+ else
+ pr_debug("clock: unknown freqsel setting for %d\n", n);
+
+ return f;
+}
+
+/*
+ * _omap3_noncore_dpll_lock - instruct a DPLL to lock and wait for readiness
+ * @clk: pointer to a DPLL struct clk
+ *
+ * Instructs a non-CORE DPLL to lock. Waits for the DPLL to report
+ * readiness before returning. Will save and restore the DPLL's
+ * autoidle state across the enable, per the CDP code. If the DPLL
+ * locked successfully, return 0; if the DPLL did not lock in the time
+ * allotted, or DPLL3 was passed in, return -EINVAL.
+ */
+static int _omap3_noncore_dpll_lock(struct clk_hw_omap *clk)
+{
+ const struct dpll_data *dd;
+ u8 ai;
+ u8 state = 1;
+ int r = 0;
+
+ pr_debug("clock: locking DPLL %s\n", __clk_get_name(clk->hw.clk));
+
+ dd = clk->dpll_data;
+ state <<= __ffs(dd->idlest_mask);
+
+ /* Check if already locked */
+ if ((ti_clk_ll_ops->clk_readl(dd->idlest_reg) & dd->idlest_mask) ==
+ state)
+ goto done;
+
+ ai = omap3_dpll_autoidle_read(clk);
+
+ if (ai)
+ omap3_dpll_deny_idle(clk);
+
+ _omap3_dpll_write_clken(clk, DPLL_LOCKED);
+
+ r = _omap3_wait_dpll_status(clk, 1);
+
+ if (ai)
+ omap3_dpll_allow_idle(clk);
+
+done:
+ return r;
+}
+
+/*
+ * _omap3_noncore_dpll_bypass - instruct a DPLL to bypass and wait for readiness
+ * @clk: pointer to a DPLL struct clk
+ *
+ * Instructs a non-CORE DPLL to enter low-power bypass mode. In
+ * bypass mode, the DPLL's rate is set equal to its parent clock's
+ * rate. Waits for the DPLL to report readiness before returning.
+ * Will save and restore the DPLL's autoidle state across the enable,
+ * per the CDP code. If the DPLL entered bypass mode successfully,
+ * return 0; if the DPLL did not enter bypass in the time allotted, or
+ * DPLL3 was passed in, or the DPLL does not support low-power bypass,
+ * return -EINVAL.
+ */
+static int _omap3_noncore_dpll_bypass(struct clk_hw_omap *clk)
+{
+ int r;
+ u8 ai;
+
+ if (!(clk->dpll_data->modes & (1 << DPLL_LOW_POWER_BYPASS)))
+ return -EINVAL;
+
+ pr_debug("clock: configuring DPLL %s for low-power bypass\n",
+ __clk_get_name(clk->hw.clk));
+
+ ai = omap3_dpll_autoidle_read(clk);
+
+ _omap3_dpll_write_clken(clk, DPLL_LOW_POWER_BYPASS);
+
+ r = _omap3_wait_dpll_status(clk, 0);
+
+ if (ai)
+ omap3_dpll_allow_idle(clk);
+
+ return r;
+}
+
+/*
+ * _omap3_noncore_dpll_stop - instruct a DPLL to stop
+ * @clk: pointer to a DPLL struct clk
+ *
+ * Instructs a non-CORE DPLL to enter low-power stop. Will save and
+ * restore the DPLL's autoidle state across the stop, per the CDP
+ * code. If DPLL3 was passed in, or the DPLL does not support
+ * low-power stop, return -EINVAL; otherwise, return 0.
+ */
+static int _omap3_noncore_dpll_stop(struct clk_hw_omap *clk)
+{
+ u8 ai;
+
+ if (!(clk->dpll_data->modes & (1 << DPLL_LOW_POWER_STOP)))
+ return -EINVAL;
+
+ pr_debug("clock: stopping DPLL %s\n", __clk_get_name(clk->hw.clk));
+
+ ai = omap3_dpll_autoidle_read(clk);
+
+ _omap3_dpll_write_clken(clk, DPLL_LOW_POWER_STOP);
+
+ if (ai)
+ omap3_dpll_allow_idle(clk);
+
+ return 0;
+}
+
+/**
+ * _lookup_dco - Lookup DCO used by j-type DPLL
+ * @clk: pointer to a DPLL struct clk
+ * @dco: digital control oscillator selector
+ * @m: DPLL multiplier to set
+ * @n: DPLL divider to set
+ *
+ * See 36xx TRM section 3.5.3.3.3.2 "Type B DPLL (Low-Jitter)"
+ *
+ * XXX This code is not needed for 3430/AM35xx; can it be optimized
+ * out in non-multi-OMAP builds for those chips?
+ */
+static void _lookup_dco(struct clk_hw_omap *clk, u8 *dco, u16 m, u8 n)
+{
+ unsigned long fint, clkinp; /* watch out for overflow */
+
+ clkinp = __clk_get_rate(__clk_get_parent(clk->hw.clk));
+ fint = (clkinp / n) * m;
+
+ if (fint < 1000000000)
+ *dco = 2;
+ else
+ *dco = 4;
+}
+
+/**
+ * _lookup_sddiv - Calculate sigma delta divider for j-type DPLL
+ * @clk: pointer to a DPLL struct clk
+ * @sd_div: target sigma-delta divider
+ * @m: DPLL multiplier to set
+ * @n: DPLL divider to set
+ *
+ * See 36xx TRM section 3.5.3.3.3.2 "Type B DPLL (Low-Jitter)"
+ *
+ * XXX This code is not needed for 3430/AM35xx; can it be optimized
+ * out in non-multi-OMAP builds for those chips?
+ */
+static void _lookup_sddiv(struct clk_hw_omap *clk, u8 *sd_div, u16 m, u8 n)
+{
+ unsigned long clkinp, sd; /* watch out for overflow */
+ int mod1, mod2;
+
+ clkinp = __clk_get_rate(__clk_get_parent(clk->hw.clk));
+
+ /*
+ * target sigma-delta to near 250MHz
+ * sd = ceil[(m/(n+1)) * (clkinp_MHz / 250)]
+ */
+ clkinp /= 100000; /* shift from MHz to 10*Hz for 38.4 and 19.2 */
+ mod1 = (clkinp * m) % (250 * n);
+ sd = (clkinp * m) / (250 * n);
+ mod2 = sd % 10;
+ sd /= 10;
+
+ if (mod1 || mod2)
+ sd++;
+ *sd_div = sd;
+}
+
+/*
+ * _omap3_noncore_dpll_program - set non-core DPLL M,N values directly
+ * @clk: struct clk * of DPLL to set
+ * @freqsel: FREQSEL value to set
+ *
+ * Program the DPLL with the last M, N values calculated, and wait for
+ * the DPLL to lock. Returns -EINVAL upon error, or 0 upon success.
+ */
+static int omap3_noncore_dpll_program(struct clk_hw_omap *clk, u16 freqsel)
+{
+ struct dpll_data *dd = clk->dpll_data;
+ u8 dco, sd_div;
+ u32 v;
+
+ /* 3430 ES2 TRM: 4.7.6.9 DPLL Programming Sequence */
+ _omap3_noncore_dpll_bypass(clk);
+
+ /*
+ * Set jitter correction. Jitter correction applicable for OMAP343X
+ * only since freqsel field is no longer present on other devices.
+ */
+ if (ti_clk_get_features()->flags & TI_CLK_DPLL_HAS_FREQSEL) {
+ v = ti_clk_ll_ops->clk_readl(dd->control_reg);
+ v &= ~dd->freqsel_mask;
+ v |= freqsel << __ffs(dd->freqsel_mask);
+ ti_clk_ll_ops->clk_writel(v, dd->control_reg);
+ }
+
+ /* Set DPLL multiplier, divider */
+ v = ti_clk_ll_ops->clk_readl(dd->mult_div1_reg);
+
+ /* Handle Duty Cycle Correction */
+ if (dd->dcc_mask) {
+ if (dd->last_rounded_rate >= dd->dcc_rate)
+ v |= dd->dcc_mask; /* Enable DCC */
+ else
+ v &= ~dd->dcc_mask; /* Disable DCC */
+ }
+
+ v &= ~(dd->mult_mask | dd->div1_mask);
+ v |= dd->last_rounded_m << __ffs(dd->mult_mask);
+ v |= (dd->last_rounded_n - 1) << __ffs(dd->div1_mask);
+
+ /* Configure dco and sd_div for dplls that have these fields */
+ if (dd->dco_mask) {
+ _lookup_dco(clk, &dco, dd->last_rounded_m, dd->last_rounded_n);
+ v &= ~(dd->dco_mask);
+ v |= dco << __ffs(dd->dco_mask);
+ }
+ if (dd->sddiv_mask) {
+ _lookup_sddiv(clk, &sd_div, dd->last_rounded_m,
+ dd->last_rounded_n);
+ v &= ~(dd->sddiv_mask);
+ v |= sd_div << __ffs(dd->sddiv_mask);
+ }
+
+ ti_clk_ll_ops->clk_writel(v, dd->mult_div1_reg);
+
+ /* Set 4X multiplier and low-power mode */
+ if (dd->m4xen_mask || dd->lpmode_mask) {
+ v = ti_clk_ll_ops->clk_readl(dd->control_reg);
+
+ if (dd->m4xen_mask) {
+ if (dd->last_rounded_m4xen)
+ v |= dd->m4xen_mask;
+ else
+ v &= ~dd->m4xen_mask;
+ }
+
+ if (dd->lpmode_mask) {
+ if (dd->last_rounded_lpmode)
+ v |= dd->lpmode_mask;
+ else
+ v &= ~dd->lpmode_mask;
+ }
+
+ ti_clk_ll_ops->clk_writel(v, dd->control_reg);
+ }
+
+ /* We let the clock framework set the other output dividers later */
+
+ /* REVISIT: Set ramp-up delay? */
+
+ _omap3_noncore_dpll_lock(clk);
+
+ return 0;
+}
+
+/* Public functions */
+
+/**
+ * omap3_dpll_recalc - recalculate DPLL rate
+ * @clk: DPLL struct clk
+ *
+ * Recalculate and propagate the DPLL rate.
+ */
+unsigned long omap3_dpll_recalc(struct clk_hw *hw, unsigned long parent_rate)
+{
+ struct clk_hw_omap *clk = to_clk_hw_omap(hw);
+
+ return omap2_get_dpll_rate(clk);
+}
+
+/* Non-CORE DPLL (e.g., DPLLs that do not control SDRC) clock functions */
+
+/**
+ * omap3_noncore_dpll_enable - instruct a DPLL to enter bypass or lock mode
+ * @clk: pointer to a DPLL struct clk
+ *
+ * Instructs a non-CORE DPLL to enable, e.g., to enter bypass or lock.
+ * The choice of modes depends on the DPLL's programmed rate: if it is
+ * the same as the DPLL's parent clock, it will enter bypass;
+ * otherwise, it will enter lock. This code will wait for the DPLL to
+ * indicate readiness before returning, unless the DPLL takes too long
+ * to enter the target state. Intended to be used as the struct clk's
+ * enable function. If DPLL3 was passed in, or the DPLL does not
+ * support low-power stop, or if the DPLL took too long to enter
+ * bypass or lock, return -EINVAL; otherwise, return 0.
+ */
+int omap3_noncore_dpll_enable(struct clk_hw *hw)
+{
+ struct clk_hw_omap *clk = to_clk_hw_omap(hw);
+ int r;
+ struct dpll_data *dd;
+ struct clk_hw *parent;
+
+ dd = clk->dpll_data;
+ if (!dd)
+ return -EINVAL;
+
+ if (clk->clkdm) {
+ r = ti_clk_ll_ops->clkdm_clk_enable(clk->clkdm, hw->clk);
+ if (r) {
+ WARN(1,
+ "%s: could not enable %s's clockdomain %s: %d\n",
+ __func__, __clk_get_name(hw->clk),
+ clk->clkdm_name, r);
+ return r;
+ }
+ }
+
+ parent = __clk_get_hw(__clk_get_parent(hw->clk));
+
+ if (__clk_get_rate(hw->clk) == __clk_get_rate(dd->clk_bypass)) {
+ WARN_ON(parent != __clk_get_hw(dd->clk_bypass));
+ r = _omap3_noncore_dpll_bypass(clk);
+ } else {
+ WARN_ON(parent != __clk_get_hw(dd->clk_ref));
+ r = _omap3_noncore_dpll_lock(clk);
+ }
+
+ return r;
+}
+
+/**
+ * omap3_noncore_dpll_disable - instruct a DPLL to enter low-power stop
+ * @clk: pointer to a DPLL struct clk
+ *
+ * Instructs a non-CORE DPLL to enter low-power stop. This function is
+ * intended for use in struct clkops. No return value.
+ */
+void omap3_noncore_dpll_disable(struct clk_hw *hw)
+{
+ struct clk_hw_omap *clk = to_clk_hw_omap(hw);
+
+ _omap3_noncore_dpll_stop(clk);
+ if (clk->clkdm)
+ ti_clk_ll_ops->clkdm_clk_disable(clk->clkdm, hw->clk);
+}
+
+/* Non-CORE DPLL rate set code */
+
+/**
+ * omap3_noncore_dpll_determine_rate - determine rate for a DPLL
+ * @hw: pointer to the clock to determine rate for
+ * @rate: target rate for the DPLL
+ * @best_parent_rate: pointer for returning best parent rate
+ * @best_parent_clk: pointer for returning best parent clock
+ *
+ * Determines which DPLL mode to use for reaching a desired target rate.
+ * Checks whether the DPLL shall be in bypass or locked mode, and if
+ * locked, calculates the M,N values for the DPLL via round-rate.
+ * Returns a positive clock rate with success, negative error value
+ * in failure.
+ */
+long omap3_noncore_dpll_determine_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long min_rate,
+ unsigned long max_rate,
+ unsigned long *best_parent_rate,
+ struct clk_hw **best_parent_clk)
+{
+ struct clk_hw_omap *clk = to_clk_hw_omap(hw);
+ struct dpll_data *dd;
+
+ if (!hw || !rate)
+ return -EINVAL;
+
+ dd = clk->dpll_data;
+ if (!dd)
+ return -EINVAL;
+
+ if (__clk_get_rate(dd->clk_bypass) == rate &&
+ (dd->modes & (1 << DPLL_LOW_POWER_BYPASS))) {
+ *best_parent_clk = __clk_get_hw(dd->clk_bypass);
+ } else {
+ rate = omap2_dpll_round_rate(hw, rate, best_parent_rate);
+ *best_parent_clk = __clk_get_hw(dd->clk_ref);
+ }
+
+ *best_parent_rate = rate;
+
+ return rate;
+}
+
+/**
+ * omap3_noncore_dpll_set_parent - set parent for a DPLL clock
+ * @hw: pointer to the clock to set parent for
+ * @index: parent index to select
+ *
+ * Sets parent for a DPLL clock. This sets the DPLL into bypass or
+ * locked mode. Returns 0 with success, negative error value otherwise.
+ */
+int omap3_noncore_dpll_set_parent(struct clk_hw *hw, u8 index)
+{
+ struct clk_hw_omap *clk = to_clk_hw_omap(hw);
+ int ret;
+
+ if (!hw)
+ return -EINVAL;
+
+ if (index)
+ ret = _omap3_noncore_dpll_bypass(clk);
+ else
+ ret = _omap3_noncore_dpll_lock(clk);
+
+ return ret;
+}
+
+/**
+ * omap3_noncore_dpll_set_rate - set rate for a DPLL clock
+ * @hw: pointer to the clock to set parent for
+ * @rate: target rate for the clock
+ * @parent_rate: rate of the parent clock
+ *
+ * Sets rate for a DPLL clock. First checks if the clock parent is
+ * reference clock (in bypass mode, the rate of the clock can't be
+ * changed) and proceeds with the rate change operation. Returns 0
+ * with success, negative error value otherwise.
+ */
+int omap3_noncore_dpll_set_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long parent_rate)
+{
+ struct clk_hw_omap *clk = to_clk_hw_omap(hw);
+ struct dpll_data *dd;
+ u16 freqsel = 0;
+ int ret;
+
+ if (!hw || !rate)
+ return -EINVAL;
+
+ dd = clk->dpll_data;
+ if (!dd)
+ return -EINVAL;
+
+ if (__clk_get_hw(__clk_get_parent(hw->clk)) !=
+ __clk_get_hw(dd->clk_ref))
+ return -EINVAL;
+
+ if (dd->last_rounded_rate == 0)
+ return -EINVAL;
+
+ /* Freqsel is available only on OMAP343X devices */
+ if (ti_clk_get_features()->flags & TI_CLK_DPLL_HAS_FREQSEL) {
+ freqsel = _omap3_dpll_compute_freqsel(clk, dd->last_rounded_n);
+ WARN_ON(!freqsel);
+ }
+
+ pr_debug("%s: %s: set rate: locking rate to %lu.\n", __func__,
+ __clk_get_name(hw->clk), rate);
+
+ ret = omap3_noncore_dpll_program(clk, freqsel);
+
+ return ret;
+}
+
+/**
+ * omap3_noncore_dpll_set_rate_and_parent - set rate and parent for a DPLL clock
+ * @hw: pointer to the clock to set rate and parent for
+ * @rate: target rate for the DPLL
+ * @parent_rate: clock rate of the DPLL parent
+ * @index: new parent index for the DPLL, 0 - reference, 1 - bypass
+ *
+ * Sets rate and parent for a DPLL clock. If new parent is the bypass
+ * clock, only selects the parent. Otherwise proceeds with a rate
+ * change, as this will effectively also change the parent as the
+ * DPLL is put into locked mode. Returns 0 with success, negative error
+ * value otherwise.
+ */
+int omap3_noncore_dpll_set_rate_and_parent(struct clk_hw *hw,
+ unsigned long rate,
+ unsigned long parent_rate,
+ u8 index)
+{
+ int ret;
+
+ if (!hw || !rate)
+ return -EINVAL;
+
+ /*
+ * clk-ref at index[0], in which case we only need to set rate,
+ * the parent will be changed automatically with the lock sequence.
+ * With clk-bypass case we only need to change parent.
+ */
+ if (index)
+ ret = omap3_noncore_dpll_set_parent(hw, index);
+ else
+ ret = omap3_noncore_dpll_set_rate(hw, rate, parent_rate);
+
+ return ret;
+}
+
+/* DPLL autoidle read/set code */
+
+/**
+ * omap3_dpll_autoidle_read - read a DPLL's autoidle bits
+ * @clk: struct clk * of the DPLL to read
+ *
+ * Return the DPLL's autoidle bits, shifted down to bit 0. Returns
+ * -EINVAL if passed a null pointer or if the struct clk does not
+ * appear to refer to a DPLL.
+ */
+static u32 omap3_dpll_autoidle_read(struct clk_hw_omap *clk)
+{
+ const struct dpll_data *dd;
+ u32 v;
+
+ if (!clk || !clk->dpll_data)
+ return -EINVAL;
+
+ dd = clk->dpll_data;
+
+ if (!dd->autoidle_reg)
+ return -EINVAL;
+
+ v = ti_clk_ll_ops->clk_readl(dd->autoidle_reg);
+ v &= dd->autoidle_mask;
+ v >>= __ffs(dd->autoidle_mask);
+
+ return v;
+}
+
+/**
+ * omap3_dpll_allow_idle - enable DPLL autoidle bits
+ * @clk: struct clk * of the DPLL to operate on
+ *
+ * Enable DPLL automatic idle control. This automatic idle mode
+ * switching takes effect only when the DPLL is locked, at least on
+ * OMAP3430. The DPLL will enter low-power stop when its downstream
+ * clocks are gated. No return value.
+ */
+static void omap3_dpll_allow_idle(struct clk_hw_omap *clk)
+{
+ const struct dpll_data *dd;
+ u32 v;
+
+ if (!clk || !clk->dpll_data)
+ return;
+
+ dd = clk->dpll_data;
+
+ if (!dd->autoidle_reg)
+ return;
+
+ /*
+ * REVISIT: CORE DPLL can optionally enter low-power bypass
+ * by writing 0x5 instead of 0x1. Add some mechanism to
+ * optionally enter this mode.
+ */
+ v = ti_clk_ll_ops->clk_readl(dd->autoidle_reg);
+ v &= ~dd->autoidle_mask;
+ v |= DPLL_AUTOIDLE_LOW_POWER_STOP << __ffs(dd->autoidle_mask);
+ ti_clk_ll_ops->clk_writel(v, dd->autoidle_reg);
+}
+
+/**
+ * omap3_dpll_deny_idle - prevent DPLL from automatically idling
+ * @clk: struct clk * of the DPLL to operate on
+ *
+ * Disable DPLL automatic idle control. No return value.
+ */
+static void omap3_dpll_deny_idle(struct clk_hw_omap *clk)
+{
+ const struct dpll_data *dd;
+ u32 v;
+
+ if (!clk || !clk->dpll_data)
+ return;
+
+ dd = clk->dpll_data;
+
+ if (!dd->autoidle_reg)
+ return;
+
+ v = ti_clk_ll_ops->clk_readl(dd->autoidle_reg);
+ v &= ~dd->autoidle_mask;
+ v |= DPLL_AUTOIDLE_DISABLE << __ffs(dd->autoidle_mask);
+ ti_clk_ll_ops->clk_writel(v, dd->autoidle_reg);
+}
+
+/* Clock control for DPLL outputs */
+
+/* Find the parent DPLL for the given clkoutx2 clock */
+static struct clk_hw_omap *omap3_find_clkoutx2_dpll(struct clk_hw *hw)
+{
+ struct clk_hw_omap *pclk = NULL;
+ struct clk *parent;
+
+ /* Walk up the parents of clk, looking for a DPLL */
+ do {
+ do {
+ parent = __clk_get_parent(hw->clk);
+ hw = __clk_get_hw(parent);
+ } while (hw && (__clk_get_flags(hw->clk) & CLK_IS_BASIC));
+ if (!hw)
+ break;
+ pclk = to_clk_hw_omap(hw);
+ } while (pclk && !pclk->dpll_data);
+
+ /* clk does not have a DPLL as a parent? error in the clock data */
+ if (!pclk) {
+ WARN_ON(1);
+ return NULL;
+ }
+
+ return pclk;
+}
+
+/**
+ * omap3_clkoutx2_recalc - recalculate DPLL X2 output virtual clock rate
+ * @clk: DPLL output struct clk
+ *
+ * Using parent clock DPLL data, look up DPLL state. If locked, set our
+ * rate to the dpll_clk * 2; otherwise, just use dpll_clk.
+ */
+unsigned long omap3_clkoutx2_recalc(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ const struct dpll_data *dd;
+ unsigned long rate;
+ u32 v;
+ struct clk_hw_omap *pclk = NULL;
+
+ if (!parent_rate)
+ return 0;
+
+ pclk = omap3_find_clkoutx2_dpll(hw);
+
+ if (!pclk)
+ return 0;
+
+ dd = pclk->dpll_data;
+
+ WARN_ON(!dd->enable_mask);
+
+ v = ti_clk_ll_ops->clk_readl(dd->control_reg) & dd->enable_mask;
+ v >>= __ffs(dd->enable_mask);
+ if ((v != OMAP3XXX_EN_DPLL_LOCKED) || (dd->flags & DPLL_J_TYPE))
+ rate = parent_rate;
+ else
+ rate = parent_rate * 2;
+ return rate;
+}
+
+/* OMAP3/4 non-CORE DPLL clkops */
+const struct clk_hw_omap_ops clkhwops_omap3_dpll = {
+ .allow_idle = omap3_dpll_allow_idle,
+ .deny_idle = omap3_dpll_deny_idle,
+};
+
+/**
+ * omap3_dpll4_set_rate - set rate for omap3 per-dpll
+ * @hw: clock to change
+ * @rate: target rate for clock
+ * @parent_rate: rate of the parent clock
+ *
+ * Check if the current SoC supports the per-dpll reprogram operation
+ * or not, and then do the rate change if supported. Returns -EINVAL
+ * if not supported, 0 for success, and potential error codes from the
+ * clock rate change.
+ */
+int omap3_dpll4_set_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long parent_rate)
+{
+ /*
+ * According to the 12-5 CDP code from TI, "Limitation 2.5"
+ * on 3430ES1 prevents us from changing DPLL multipliers or dividers
+ * on DPLL4.
+ */
+ if (ti_clk_get_features()->flags & TI_CLK_DPLL4_DENY_REPROGRAM) {
+ pr_err("clock: DPLL4 cannot change rate due to silicon 'Limitation 2.5' on 3430ES1.\n");
+ return -EINVAL;
+ }
+
+ return omap3_noncore_dpll_set_rate(hw, rate, parent_rate);
+}
+
+/**
+ * omap3_dpll4_set_rate_and_parent - set rate and parent for omap3 per-dpll
+ * @hw: clock to change
+ * @rate: target rate for clock
+ * @parent_rate: rate of the parent clock
+ * @index: parent index, 0 - reference clock, 1 - bypass clock
+ *
+ * Check if the current SoC support the per-dpll reprogram operation
+ * or not, and then do the rate + parent change if supported. Returns
+ * -EINVAL if not supported, 0 for success, and potential error codes
+ * from the clock rate change.
+ */
+int omap3_dpll4_set_rate_and_parent(struct clk_hw *hw, unsigned long rate,
+ unsigned long parent_rate, u8 index)
+{
+ if (ti_clk_get_features()->flags & TI_CLK_DPLL4_DENY_REPROGRAM) {
+ pr_err("clock: DPLL4 cannot change rate due to silicon 'Limitation 2.5' on 3430ES1.\n");
+ return -EINVAL;
+ }
+
+ return omap3_noncore_dpll_set_rate_and_parent(hw, rate, parent_rate,
+ index);
+}
diff --git a/include/linux/clk/ti.h b/include/linux/clk/ti.h
index 3ca818e..0f9d15f 100644
--- a/include/linux/clk/ti.h
+++ b/include/linux/clk/ti.h
@@ -271,41 +271,13 @@ extern const struct clk_ops ti_clk_mux_ops;
#define to_clk_hw_omap(_hw) container_of(_hw, struct clk_hw_omap, hw)
-int omap3_noncore_dpll_enable(struct clk_hw *hw);
-void omap3_noncore_dpll_disable(struct clk_hw *hw);
-int omap3_noncore_dpll_set_parent(struct clk_hw *hw, u8 index);
-int omap3_noncore_dpll_set_rate(struct clk_hw *hw, unsigned long rate,
- unsigned long parent_rate);
-int omap3_noncore_dpll_set_rate_and_parent(struct clk_hw *hw,
- unsigned long rate,
- unsigned long parent_rate,
- u8 index);
-long omap3_noncore_dpll_determine_rate(struct clk_hw *hw,
- unsigned long rate,
- unsigned long min_rate,
- unsigned long max_rate,
- unsigned long *best_parent_rate,
- struct clk_hw **best_parent_clk);
-unsigned long omap3_dpll_recalc(struct clk_hw *hw, unsigned long parent_rate);
-long omap2_dpll_round_rate(struct clk_hw *hw, unsigned long target_rate,
- unsigned long *parent_rate);
void omap2_init_clk_clkdm(struct clk_hw *clk);
-unsigned long omap3_clkoutx2_recalc(struct clk_hw *hw,
- unsigned long parent_rate);
-int omap3_clkoutx2_set_rate(struct clk_hw *hw, unsigned long rate,
- unsigned long parent_rate);
-long omap3_clkoutx2_round_rate(struct clk_hw *hw, unsigned long rate,
- unsigned long *prate);
int omap2_clkops_enable_clkdm(struct clk_hw *hw);
void omap2_clkops_disable_clkdm(struct clk_hw *hw);
int omap2_clk_disable_autoidle_all(void);
int omap2_clk_enable_autoidle_all(void);
int omap2_clk_allow_idle(struct clk *clk);
int omap2_clk_deny_idle(struct clk *clk);
-int omap3_dpll4_set_rate(struct clk_hw *clk, unsigned long rate,
- unsigned long parent_rate);
-int omap3_dpll4_set_rate_and_parent(struct clk_hw *hw, unsigned long rate,
- unsigned long parent_rate, u8 index);
int omap2_dflt_clk_enable(struct clk_hw *hw);
void omap2_dflt_clk_disable(struct clk_hw *hw);
int omap2_dflt_clk_is_enabled(struct clk_hw *hw);
@@ -317,7 +289,6 @@ void omap2_clk_dflt_find_companion(struct clk_hw_omap *clk,
void omap2_clk_dflt_find_idlest(struct clk_hw_omap *clk,
void __iomem **idlest_reg,
u8 *idlest_bit, u8 *idlest_val);
-void omap3_clk_lock_dpll5(void);
unsigned long omap2_dpllcore_recalc(struct clk_hw *hw,
unsigned long parent_rate);
int omap2_reprogram_dpllcore(struct clk_hw *clk, unsigned long rate,
@@ -365,7 +336,6 @@ struct ti_clk_features *ti_clk_get_features(void);
extern const struct clk_hw_omap_ops clkhwops_omap2xxx_dpll;
extern const struct clk_hw_omap_ops clkhwops_omap2430_i2chs_wait;
-extern const struct clk_hw_omap_ops clkhwops_omap3_dpll;
extern const struct clk_hw_omap_ops clkhwops_wait;
extern const struct clk_hw_omap_ops clkhwops_omap3430es2_dss_usbhost_wait;
extern const struct clk_hw_omap_ops clkhwops_am35xx_ipss_module_wait;
--
1.7.9.5
^ permalink raw reply related [flat|nested] 120+ messages in thread
* [PATCHv2 15/27] ARM: OMAP3: clock: remove clock3xxx.c file
2015-05-11 8:54 ` Tero Kristo
(?)
@ 2015-05-11 8:54 ` Tero Kristo
-1 siblings, 0 replies; 120+ messages in thread
From: Tero Kristo @ 2015-05-11 8:54 UTC (permalink / raw)
To: mturquette, tony, linux-omap, linux-clk, sboyd, paul; +Cc: linux-arm-kernel
This now only has a couple of variables within it, which are used outside
the file itself. Move these variables to where they are actually used,
and remove the file completely as it is now empty.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
---
arch/arm/mach-omap2/Makefile | 2 +-
arch/arm/mach-omap2/clkt34xx_dpll3m2.c | 2 ++
arch/arm/mach-omap2/clock3xxx.c | 33 --------------------------------
3 files changed, 3 insertions(+), 34 deletions(-)
delete mode 100644 arch/arm/mach-omap2/clock3xxx.c
diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
index f9d4ccf..07052656 100644
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -186,7 +186,7 @@ obj-$(CONFIG_ARCH_OMAP2) += clkt2xxx_dpllcore.o
obj-$(CONFIG_ARCH_OMAP2) += clkt2xxx_virt_prcm_set.o
obj-$(CONFIG_ARCH_OMAP2) += clkt2xxx_dpll.o
obj-$(CONFIG_SOC_OMAP2430) += clock2430.o
-obj-$(CONFIG_ARCH_OMAP3) += $(clock-common) clock3xxx.o
+obj-$(CONFIG_ARCH_OMAP3) += $(clock-common)
obj-$(CONFIG_ARCH_OMAP3) += clock34xx.o clkt34xx_dpll3m2.o
obj-$(CONFIG_ARCH_OMAP3) += clock3517.o
obj-$(CONFIG_ARCH_OMAP4) += $(clock-common)
diff --git a/arch/arm/mach-omap2/clkt34xx_dpll3m2.c b/arch/arm/mach-omap2/clkt34xx_dpll3m2.c
index 825e3da..6cd2961 100644
--- a/arch/arm/mach-omap2/clkt34xx_dpll3m2.c
+++ b/arch/arm/mach-omap2/clkt34xx_dpll3m2.c
@@ -29,6 +29,8 @@
#define CYCLES_PER_MHZ 1000000
+struct clk *sdrc_ick_p, *arm_fck_p;
+
/*
* CORE DPLL (DPLL3) M2 divider rate programming functions
*
diff --git a/arch/arm/mach-omap2/clock3xxx.c b/arch/arm/mach-omap2/clock3xxx.c
deleted file mode 100644
index 0b0e3a87..0000000
--- a/arch/arm/mach-omap2/clock3xxx.c
+++ /dev/null
@@ -1,33 +0,0 @@
-/*
- * OMAP3-specific clock framework functions
- *
- * Copyright (C) 2007-2008 Texas Instruments, Inc.
- * Copyright (C) 2007-2010 Nokia Corporation
- *
- * Paul Walmsley
- * Jouni Högander
- *
- * Parts of this code are based on code written by
- * Richard Woodruff, Tony Lindgren, Tuukka Tikkanen, Karthik Dasu
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#undef DEBUG
-
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-
-#include "soc.h"
-#include "clock.h"
-#include "clock3xxx.h"
-#include "prm2xxx_3xxx.h"
-#include "prm-regbits-34xx.h"
-#include "cm2xxx_3xxx.h"
-#include "cm-regbits-34xx.h"
-
-/* needed by omap3_core_dpll_m2_set_rate() */
-struct clk *sdrc_ick_p, *arm_fck_p;
--
1.7.9.5
^ permalink raw reply related [flat|nested] 120+ messages in thread
* [PATCHv2 15/27] ARM: OMAP3: clock: remove clock3xxx.c file
@ 2015-05-11 8:54 ` Tero Kristo
0 siblings, 0 replies; 120+ messages in thread
From: Tero Kristo @ 2015-05-11 8:54 UTC (permalink / raw)
To: mturquette, tony, linux-omap, linux-clk, sboyd, paul; +Cc: linux-arm-kernel
This now only has a couple of variables within it, which are used outside
the file itself. Move these variables to where they are actually used,
and remove the file completely as it is now empty.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
---
arch/arm/mach-omap2/Makefile | 2 +-
arch/arm/mach-omap2/clkt34xx_dpll3m2.c | 2 ++
arch/arm/mach-omap2/clock3xxx.c | 33 --------------------------------
3 files changed, 3 insertions(+), 34 deletions(-)
delete mode 100644 arch/arm/mach-omap2/clock3xxx.c
diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
index f9d4ccf..07052656 100644
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -186,7 +186,7 @@ obj-$(CONFIG_ARCH_OMAP2) += clkt2xxx_dpllcore.o
obj-$(CONFIG_ARCH_OMAP2) += clkt2xxx_virt_prcm_set.o
obj-$(CONFIG_ARCH_OMAP2) += clkt2xxx_dpll.o
obj-$(CONFIG_SOC_OMAP2430) += clock2430.o
-obj-$(CONFIG_ARCH_OMAP3) += $(clock-common) clock3xxx.o
+obj-$(CONFIG_ARCH_OMAP3) += $(clock-common)
obj-$(CONFIG_ARCH_OMAP3) += clock34xx.o clkt34xx_dpll3m2.o
obj-$(CONFIG_ARCH_OMAP3) += clock3517.o
obj-$(CONFIG_ARCH_OMAP4) += $(clock-common)
diff --git a/arch/arm/mach-omap2/clkt34xx_dpll3m2.c b/arch/arm/mach-omap2/clkt34xx_dpll3m2.c
index 825e3da..6cd2961 100644
--- a/arch/arm/mach-omap2/clkt34xx_dpll3m2.c
+++ b/arch/arm/mach-omap2/clkt34xx_dpll3m2.c
@@ -29,6 +29,8 @@
#define CYCLES_PER_MHZ 1000000
+struct clk *sdrc_ick_p, *arm_fck_p;
+
/*
* CORE DPLL (DPLL3) M2 divider rate programming functions
*
diff --git a/arch/arm/mach-omap2/clock3xxx.c b/arch/arm/mach-omap2/clock3xxx.c
deleted file mode 100644
index 0b0e3a87..0000000
--- a/arch/arm/mach-omap2/clock3xxx.c
+++ /dev/null
@@ -1,33 +0,0 @@
-/*
- * OMAP3-specific clock framework functions
- *
- * Copyright (C) 2007-2008 Texas Instruments, Inc.
- * Copyright (C) 2007-2010 Nokia Corporation
- *
- * Paul Walmsley
- * Jouni Högander
- *
- * Parts of this code are based on code written by
- * Richard Woodruff, Tony Lindgren, Tuukka Tikkanen, Karthik Dasu
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#undef DEBUG
-
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-
-#include "soc.h"
-#include "clock.h"
-#include "clock3xxx.h"
-#include "prm2xxx_3xxx.h"
-#include "prm-regbits-34xx.h"
-#include "cm2xxx_3xxx.h"
-#include "cm-regbits-34xx.h"
-
-/* needed by omap3_core_dpll_m2_set_rate() */
-struct clk *sdrc_ick_p, *arm_fck_p;
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related [flat|nested] 120+ messages in thread
* [PATCHv2 15/27] ARM: OMAP3: clock: remove clock3xxx.c file
@ 2015-05-11 8:54 ` Tero Kristo
0 siblings, 0 replies; 120+ messages in thread
From: Tero Kristo @ 2015-05-11 8:54 UTC (permalink / raw)
To: linux-arm-kernel
This now only has a couple of variables within it, which are used outside
the file itself. Move these variables to where they are actually used,
and remove the file completely as it is now empty.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
---
arch/arm/mach-omap2/Makefile | 2 +-
arch/arm/mach-omap2/clkt34xx_dpll3m2.c | 2 ++
arch/arm/mach-omap2/clock3xxx.c | 33 --------------------------------
3 files changed, 3 insertions(+), 34 deletions(-)
delete mode 100644 arch/arm/mach-omap2/clock3xxx.c
diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
index f9d4ccf..07052656 100644
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -186,7 +186,7 @@ obj-$(CONFIG_ARCH_OMAP2) += clkt2xxx_dpllcore.o
obj-$(CONFIG_ARCH_OMAP2) += clkt2xxx_virt_prcm_set.o
obj-$(CONFIG_ARCH_OMAP2) += clkt2xxx_dpll.o
obj-$(CONFIG_SOC_OMAP2430) += clock2430.o
-obj-$(CONFIG_ARCH_OMAP3) += $(clock-common) clock3xxx.o
+obj-$(CONFIG_ARCH_OMAP3) += $(clock-common)
obj-$(CONFIG_ARCH_OMAP3) += clock34xx.o clkt34xx_dpll3m2.o
obj-$(CONFIG_ARCH_OMAP3) += clock3517.o
obj-$(CONFIG_ARCH_OMAP4) += $(clock-common)
diff --git a/arch/arm/mach-omap2/clkt34xx_dpll3m2.c b/arch/arm/mach-omap2/clkt34xx_dpll3m2.c
index 825e3da..6cd2961 100644
--- a/arch/arm/mach-omap2/clkt34xx_dpll3m2.c
+++ b/arch/arm/mach-omap2/clkt34xx_dpll3m2.c
@@ -29,6 +29,8 @@
#define CYCLES_PER_MHZ 1000000
+struct clk *sdrc_ick_p, *arm_fck_p;
+
/*
* CORE DPLL (DPLL3) M2 divider rate programming functions
*
diff --git a/arch/arm/mach-omap2/clock3xxx.c b/arch/arm/mach-omap2/clock3xxx.c
deleted file mode 100644
index 0b0e3a87..0000000
--- a/arch/arm/mach-omap2/clock3xxx.c
+++ /dev/null
@@ -1,33 +0,0 @@
-/*
- * OMAP3-specific clock framework functions
- *
- * Copyright (C) 2007-2008 Texas Instruments, Inc.
- * Copyright (C) 2007-2010 Nokia Corporation
- *
- * Paul Walmsley
- * Jouni H?gander
- *
- * Parts of this code are based on code written by
- * Richard Woodruff, Tony Lindgren, Tuukka Tikkanen, Karthik Dasu
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#undef DEBUG
-
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-
-#include "soc.h"
-#include "clock.h"
-#include "clock3xxx.h"
-#include "prm2xxx_3xxx.h"
-#include "prm-regbits-34xx.h"
-#include "cm2xxx_3xxx.h"
-#include "cm-regbits-34xx.h"
-
-/* needed by omap3_core_dpll_m2_set_rate() */
-struct clk *sdrc_ick_p, *arm_fck_p;
--
1.7.9.5
^ permalink raw reply related [flat|nested] 120+ messages in thread
* [PATCHv2 16/27] ARM: OMAP2+: clock: remove clkdm_control static boolean from code
2015-05-11 8:54 ` Tero Kristo
(?)
@ 2015-05-11 8:54 ` Tero Kristo
-1 siblings, 0 replies; 120+ messages in thread
From: Tero Kristo @ 2015-05-11 8:54 UTC (permalink / raw)
To: mturquette, tony, linux-omap, linux-clk, sboyd, paul; +Cc: linux-arm-kernel
clkdm_control is used to determine, whether clocks should trigger a
clockdomain transition when they are enabled/disabled. Keep this
functionality intact, but replace this with a clk_features flag
which can be initialized during boot if needed.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
---
arch/arm/mach-omap2/clock.c | 34 ++++++++++------------------------
arch/arm/mach-omap2/clock.h | 2 --
include/linux/clk/ti.h | 1 +
3 files changed, 11 insertions(+), 26 deletions(-)
diff --git a/arch/arm/mach-omap2/clock.c b/arch/arm/mach-omap2/clock.c
index 7a5713d..6c17adf 100644
--- a/arch/arm/mach-omap2/clock.c
+++ b/arch/arm/mach-omap2/clock.c
@@ -61,14 +61,6 @@ u16 cpu_mask;
#define OMAP3PLUS_DPLL_FINT_MIN 32000
#define OMAP3PLUS_DPLL_FINT_MAX 52000000
-/*
- * clkdm_control: if true, then when a clock is enabled in the
- * hardware, its clockdomain will first be enabled; and when a clock
- * is disabled in the hardware, its clockdomain will be disabled
- * afterwards.
- */
-static bool clkdm_control = true;
-
struct clk_iomap {
struct regmap *regmap;
void __iomem *mem;
@@ -288,19 +280,6 @@ void omap2_init_clk_clkdm(struct clk_hw *hw)
}
/**
- * omap2_clk_disable_clkdm_control - disable clkdm control on clk enable/disable
- *
- * Prevent the OMAP clock code from calling into the clockdomain code
- * when a hardware clock in that clockdomain is enabled or disabled.
- * Intended to be called at init time from omap*_clk_init(). No
- * return value.
- */
-void __init omap2_clk_disable_clkdm_control(void)
-{
- clkdm_control = false;
-}
-
-/**
* omap2_clk_dflt_find_companion - find companion clock to @clk
* @clk: struct clk * to find the companion clock of
* @other_reg: void __iomem ** to return the companion clock CM_*CLKEN va in
@@ -384,6 +363,12 @@ int omap2_dflt_clk_enable(struct clk_hw *hw)
struct clk_hw_omap *clk;
u32 v;
int ret = 0;
+ bool clkdm_control;
+
+ if (ti_clk_get_features()->flags & TI_CLK_DISABLE_CLKDM_CONTROL)
+ clkdm_control = false;
+ else
+ clkdm_control = true;
clk = to_clk_hw_omap(hw);
@@ -457,7 +442,8 @@ void omap2_dflt_clk_disable(struct clk_hw *hw)
omap2_clk_writel(v, clk, clk->enable_reg);
/* No OCP barrier needed here since it is a disable operation */
- if (clkdm_control && clk->clkdm)
+ if (!(ti_clk_get_features()->flags & TI_CLK_DISABLE_CLKDM_CONTROL) &&
+ clk->clkdm)
clkdm_clk_disable(clk->clkdm, hw->clk);
}
@@ -490,7 +476,7 @@ int omap2_clkops_enable_clkdm(struct clk_hw *hw)
pr_err("%s: %s: should use dflt_clk_enable ?!\n", __func__,
__clk_get_name(hw->clk));
- if (!clkdm_control) {
+ if (ti_clk_get_features()->flags & TI_CLK_DISABLE_CLKDM_CONTROL) {
pr_err("%s: %s: clkfw-based clockdomain control disabled ?!\n",
__func__, __clk_get_name(hw->clk));
return 0;
@@ -528,7 +514,7 @@ void omap2_clkops_disable_clkdm(struct clk_hw *hw)
pr_err("%s: %s: should use dflt_clk_disable ?!\n", __func__,
__clk_get_name(hw->clk));
- if (!clkdm_control) {
+ if (ti_clk_get_features()->flags & TI_CLK_DISABLE_CLKDM_CONTROL) {
pr_err("%s: %s: clkfw-based clockdomain control disabled ?!\n",
__func__, __clk_get_name(hw->clk));
return;
diff --git a/arch/arm/mach-omap2/clock.h b/arch/arm/mach-omap2/clock.h
index d60691d..9480654 100644
--- a/arch/arm/mach-omap2/clock.h
+++ b/arch/arm/mach-omap2/clock.h
@@ -180,8 +180,6 @@ struct clksel {
#define OMAP4XXX_EN_DPLL_FRBYPASS 0x6
#define OMAP4XXX_EN_DPLL_LOCKED 0x7
-void __init omap2_clk_disable_clkdm_control(void);
-
void omap2_clk_print_new_rates(const char *hfclkin_ck_name,
const char *core_ck_name,
const char *mpu_ck_name);
diff --git a/include/linux/clk/ti.h b/include/linux/clk/ti.h
index 0f9d15f..3dadb74 100644
--- a/include/linux/clk/ti.h
+++ b/include/linux/clk/ti.h
@@ -330,6 +330,7 @@ struct ti_clk_features {
#define TI_CLK_DPLL_HAS_FREQSEL BIT(0)
#define TI_CLK_DPLL4_DENY_REPROGRAM BIT(1)
+#define TI_CLK_DISABLE_CLKDM_CONTROL BIT(2)
void ti_clk_setup_features(struct ti_clk_features *features);
struct ti_clk_features *ti_clk_get_features(void);
--
1.7.9.5
^ permalink raw reply related [flat|nested] 120+ messages in thread
* [PATCHv2 16/27] ARM: OMAP2+: clock: remove clkdm_control static boolean from code
@ 2015-05-11 8:54 ` Tero Kristo
0 siblings, 0 replies; 120+ messages in thread
From: Tero Kristo @ 2015-05-11 8:54 UTC (permalink / raw)
To: mturquette, tony, linux-omap, linux-clk, sboyd, paul; +Cc: linux-arm-kernel
clkdm_control is used to determine, whether clocks should trigger a
clockdomain transition when they are enabled/disabled. Keep this
functionality intact, but replace this with a clk_features flag
which can be initialized during boot if needed.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
---
arch/arm/mach-omap2/clock.c | 34 ++++++++++------------------------
arch/arm/mach-omap2/clock.h | 2 --
include/linux/clk/ti.h | 1 +
3 files changed, 11 insertions(+), 26 deletions(-)
diff --git a/arch/arm/mach-omap2/clock.c b/arch/arm/mach-omap2/clock.c
index 7a5713d..6c17adf 100644
--- a/arch/arm/mach-omap2/clock.c
+++ b/arch/arm/mach-omap2/clock.c
@@ -61,14 +61,6 @@ u16 cpu_mask;
#define OMAP3PLUS_DPLL_FINT_MIN 32000
#define OMAP3PLUS_DPLL_FINT_MAX 52000000
-/*
- * clkdm_control: if true, then when a clock is enabled in the
- * hardware, its clockdomain will first be enabled; and when a clock
- * is disabled in the hardware, its clockdomain will be disabled
- * afterwards.
- */
-static bool clkdm_control = true;
-
struct clk_iomap {
struct regmap *regmap;
void __iomem *mem;
@@ -288,19 +280,6 @@ void omap2_init_clk_clkdm(struct clk_hw *hw)
}
/**
- * omap2_clk_disable_clkdm_control - disable clkdm control on clk enable/disable
- *
- * Prevent the OMAP clock code from calling into the clockdomain code
- * when a hardware clock in that clockdomain is enabled or disabled.
- * Intended to be called at init time from omap*_clk_init(). No
- * return value.
- */
-void __init omap2_clk_disable_clkdm_control(void)
-{
- clkdm_control = false;
-}
-
-/**
* omap2_clk_dflt_find_companion - find companion clock to @clk
* @clk: struct clk * to find the companion clock of
* @other_reg: void __iomem ** to return the companion clock CM_*CLKEN va in
@@ -384,6 +363,12 @@ int omap2_dflt_clk_enable(struct clk_hw *hw)
struct clk_hw_omap *clk;
u32 v;
int ret = 0;
+ bool clkdm_control;
+
+ if (ti_clk_get_features()->flags & TI_CLK_DISABLE_CLKDM_CONTROL)
+ clkdm_control = false;
+ else
+ clkdm_control = true;
clk = to_clk_hw_omap(hw);
@@ -457,7 +442,8 @@ void omap2_dflt_clk_disable(struct clk_hw *hw)
omap2_clk_writel(v, clk, clk->enable_reg);
/* No OCP barrier needed here since it is a disable operation */
- if (clkdm_control && clk->clkdm)
+ if (!(ti_clk_get_features()->flags & TI_CLK_DISABLE_CLKDM_CONTROL) &&
+ clk->clkdm)
clkdm_clk_disable(clk->clkdm, hw->clk);
}
@@ -490,7 +476,7 @@ int omap2_clkops_enable_clkdm(struct clk_hw *hw)
pr_err("%s: %s: should use dflt_clk_enable ?!\n", __func__,
__clk_get_name(hw->clk));
- if (!clkdm_control) {
+ if (ti_clk_get_features()->flags & TI_CLK_DISABLE_CLKDM_CONTROL) {
pr_err("%s: %s: clkfw-based clockdomain control disabled ?!\n",
__func__, __clk_get_name(hw->clk));
return 0;
@@ -528,7 +514,7 @@ void omap2_clkops_disable_clkdm(struct clk_hw *hw)
pr_err("%s: %s: should use dflt_clk_disable ?!\n", __func__,
__clk_get_name(hw->clk));
- if (!clkdm_control) {
+ if (ti_clk_get_features()->flags & TI_CLK_DISABLE_CLKDM_CONTROL) {
pr_err("%s: %s: clkfw-based clockdomain control disabled ?!\n",
__func__, __clk_get_name(hw->clk));
return;
diff --git a/arch/arm/mach-omap2/clock.h b/arch/arm/mach-omap2/clock.h
index d60691d..9480654 100644
--- a/arch/arm/mach-omap2/clock.h
+++ b/arch/arm/mach-omap2/clock.h
@@ -180,8 +180,6 @@ struct clksel {
#define OMAP4XXX_EN_DPLL_FRBYPASS 0x6
#define OMAP4XXX_EN_DPLL_LOCKED 0x7
-void __init omap2_clk_disable_clkdm_control(void);
-
void omap2_clk_print_new_rates(const char *hfclkin_ck_name,
const char *core_ck_name,
const char *mpu_ck_name);
diff --git a/include/linux/clk/ti.h b/include/linux/clk/ti.h
index 0f9d15f..3dadb74 100644
--- a/include/linux/clk/ti.h
+++ b/include/linux/clk/ti.h
@@ -330,6 +330,7 @@ struct ti_clk_features {
#define TI_CLK_DPLL_HAS_FREQSEL BIT(0)
#define TI_CLK_DPLL4_DENY_REPROGRAM BIT(1)
+#define TI_CLK_DISABLE_CLKDM_CONTROL BIT(2)
void ti_clk_setup_features(struct ti_clk_features *features);
struct ti_clk_features *ti_clk_get_features(void);
--
1.7.9.5
^ permalink raw reply related [flat|nested] 120+ messages in thread
* [PATCHv2 16/27] ARM: OMAP2+: clock: remove clkdm_control static boolean from code
@ 2015-05-11 8:54 ` Tero Kristo
0 siblings, 0 replies; 120+ messages in thread
From: Tero Kristo @ 2015-05-11 8:54 UTC (permalink / raw)
To: linux-arm-kernel
clkdm_control is used to determine, whether clocks should trigger a
clockdomain transition when they are enabled/disabled. Keep this
functionality intact, but replace this with a clk_features flag
which can be initialized during boot if needed.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
---
arch/arm/mach-omap2/clock.c | 34 ++++++++++------------------------
arch/arm/mach-omap2/clock.h | 2 --
include/linux/clk/ti.h | 1 +
3 files changed, 11 insertions(+), 26 deletions(-)
diff --git a/arch/arm/mach-omap2/clock.c b/arch/arm/mach-omap2/clock.c
index 7a5713d..6c17adf 100644
--- a/arch/arm/mach-omap2/clock.c
+++ b/arch/arm/mach-omap2/clock.c
@@ -61,14 +61,6 @@ u16 cpu_mask;
#define OMAP3PLUS_DPLL_FINT_MIN 32000
#define OMAP3PLUS_DPLL_FINT_MAX 52000000
-/*
- * clkdm_control: if true, then when a clock is enabled in the
- * hardware, its clockdomain will first be enabled; and when a clock
- * is disabled in the hardware, its clockdomain will be disabled
- * afterwards.
- */
-static bool clkdm_control = true;
-
struct clk_iomap {
struct regmap *regmap;
void __iomem *mem;
@@ -288,19 +280,6 @@ void omap2_init_clk_clkdm(struct clk_hw *hw)
}
/**
- * omap2_clk_disable_clkdm_control - disable clkdm control on clk enable/disable
- *
- * Prevent the OMAP clock code from calling into the clockdomain code
- * when a hardware clock in that clockdomain is enabled or disabled.
- * Intended to be called at init time from omap*_clk_init(). No
- * return value.
- */
-void __init omap2_clk_disable_clkdm_control(void)
-{
- clkdm_control = false;
-}
-
-/**
* omap2_clk_dflt_find_companion - find companion clock to @clk
* @clk: struct clk * to find the companion clock of
* @other_reg: void __iomem ** to return the companion clock CM_*CLKEN va in
@@ -384,6 +363,12 @@ int omap2_dflt_clk_enable(struct clk_hw *hw)
struct clk_hw_omap *clk;
u32 v;
int ret = 0;
+ bool clkdm_control;
+
+ if (ti_clk_get_features()->flags & TI_CLK_DISABLE_CLKDM_CONTROL)
+ clkdm_control = false;
+ else
+ clkdm_control = true;
clk = to_clk_hw_omap(hw);
@@ -457,7 +442,8 @@ void omap2_dflt_clk_disable(struct clk_hw *hw)
omap2_clk_writel(v, clk, clk->enable_reg);
/* No OCP barrier needed here since it is a disable operation */
- if (clkdm_control && clk->clkdm)
+ if (!(ti_clk_get_features()->flags & TI_CLK_DISABLE_CLKDM_CONTROL) &&
+ clk->clkdm)
clkdm_clk_disable(clk->clkdm, hw->clk);
}
@@ -490,7 +476,7 @@ int omap2_clkops_enable_clkdm(struct clk_hw *hw)
pr_err("%s: %s: should use dflt_clk_enable ?!\n", __func__,
__clk_get_name(hw->clk));
- if (!clkdm_control) {
+ if (ti_clk_get_features()->flags & TI_CLK_DISABLE_CLKDM_CONTROL) {
pr_err("%s: %s: clkfw-based clockdomain control disabled ?!\n",
__func__, __clk_get_name(hw->clk));
return 0;
@@ -528,7 +514,7 @@ void omap2_clkops_disable_clkdm(struct clk_hw *hw)
pr_err("%s: %s: should use dflt_clk_disable ?!\n", __func__,
__clk_get_name(hw->clk));
- if (!clkdm_control) {
+ if (ti_clk_get_features()->flags & TI_CLK_DISABLE_CLKDM_CONTROL) {
pr_err("%s: %s: clkfw-based clockdomain control disabled ?!\n",
__func__, __clk_get_name(hw->clk));
return;
diff --git a/arch/arm/mach-omap2/clock.h b/arch/arm/mach-omap2/clock.h
index d60691d..9480654 100644
--- a/arch/arm/mach-omap2/clock.h
+++ b/arch/arm/mach-omap2/clock.h
@@ -180,8 +180,6 @@ struct clksel {
#define OMAP4XXX_EN_DPLL_FRBYPASS 0x6
#define OMAP4XXX_EN_DPLL_LOCKED 0x7
-void __init omap2_clk_disable_clkdm_control(void);
-
void omap2_clk_print_new_rates(const char *hfclkin_ck_name,
const char *core_ck_name,
const char *mpu_ck_name);
diff --git a/include/linux/clk/ti.h b/include/linux/clk/ti.h
index 0f9d15f..3dadb74 100644
--- a/include/linux/clk/ti.h
+++ b/include/linux/clk/ti.h
@@ -330,6 +330,7 @@ struct ti_clk_features {
#define TI_CLK_DPLL_HAS_FREQSEL BIT(0)
#define TI_CLK_DPLL4_DENY_REPROGRAM BIT(1)
+#define TI_CLK_DISABLE_CLKDM_CONTROL BIT(2)
void ti_clk_setup_features(struct ti_clk_features *features);
struct ti_clk_features *ti_clk_get_features(void);
--
1.7.9.5
^ permalink raw reply related [flat|nested] 120+ messages in thread
* [PATCHv2 17/27] clk: ti: dflt: move support for default gate clock to clock driver
2015-05-11 8:54 ` Tero Kristo
(?)
@ 2015-05-11 8:54 ` Tero Kristo
-1 siblings, 0 replies; 120+ messages in thread
From: Tero Kristo @ 2015-05-11 8:54 UTC (permalink / raw)
To: mturquette, tony, linux-omap, linux-clk, sboyd, paul; +Cc: linux-arm-kernel
With the legacy support gone, OMAP2+ default gate clock can be moved
under clock driver. Create a new file for the purpose, and clean-up
the header exports a bit as some clock APIs are no longer needed
outside clock driver itself.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
---
arch/arm/mach-omap2/clock.c | 273 -------------------------------------
drivers/clk/ti/Makefile | 3 +-
drivers/clk/ti/clkt_dflt.c | 316 +++++++++++++++++++++++++++++++++++++++++++
drivers/clk/ti/clock.h | 5 +
include/linux/clk/ti.h | 4 -
5 files changed, 323 insertions(+), 278 deletions(-)
create mode 100644 drivers/clk/ti/clkt_dflt.c
diff --git a/arch/arm/mach-omap2/clock.c b/arch/arm/mach-omap2/clock.c
index 6c17adf..38a336b 100644
--- a/arch/arm/mach-omap2/clock.c
+++ b/arch/arm/mach-omap2/clock.c
@@ -40,12 +40,6 @@
#include "cm-regbits-34xx.h"
#include "common.h"
-/*
- * MAX_MODULE_ENABLE_WAIT: maximum of number of microseconds to wait
- * for a module to indicate that it is no longer in idle
- */
-#define MAX_MODULE_ENABLE_WAIT 100000
-
u16 cpu_mask;
/* DPLL valid Fint frequency band limits - from 34xx TRM Section 4.7.6.2 */
@@ -176,77 +170,6 @@ void __init omap2_clk_legacy_provider_init(int index, void __iomem *mem)
/* Private functions */
-
-/**
- * _wait_idlest_generic - wait for a module to leave the idle state
- * @clk: module clock to wait for (needed for register offsets)
- * @reg: virtual address of module IDLEST register
- * @mask: value to mask against to determine if the module is active
- * @idlest: idle state indicator (0 or 1) for the clock
- * @name: name of the clock (for printk)
- *
- * Wait for a module to leave idle, where its idle-status register is
- * not inside the CM module. Returns 1 if the module left idle
- * promptly, or 0 if the module did not leave idle before the timeout
- * elapsed. XXX Deprecated - should be moved into drivers for the
- * individual IP block that the IDLEST register exists in.
- */
-static int _wait_idlest_generic(struct clk_hw_omap *clk, void __iomem *reg,
- u32 mask, u8 idlest, const char *name)
-{
- int i = 0, ena = 0;
-
- ena = (idlest) ? 0 : mask;
-
- omap_test_timeout(((omap2_clk_readl(clk, reg) & mask) == ena),
- MAX_MODULE_ENABLE_WAIT, i);
-
- if (i < MAX_MODULE_ENABLE_WAIT)
- pr_debug("omap clock: module associated with clock %s ready after %d loops\n",
- name, i);
- else
- pr_err("omap clock: module associated with clock %s didn't enable in %d tries\n",
- name, MAX_MODULE_ENABLE_WAIT);
-
- return (i < MAX_MODULE_ENABLE_WAIT) ? 1 : 0;
-};
-
-/**
- * _omap2_module_wait_ready - wait for an OMAP module to leave IDLE
- * @clk: struct clk * belonging to the module
- *
- * If the necessary clocks for the OMAP hardware IP block that
- * corresponds to clock @clk are enabled, then wait for the module to
- * indicate readiness (i.e., to leave IDLE). This code does not
- * belong in the clock code and will be moved in the medium term to
- * module-dependent code. No return value.
- */
-static void _omap2_module_wait_ready(struct clk_hw_omap *clk)
-{
- void __iomem *companion_reg, *idlest_reg;
- u8 other_bit, idlest_bit, idlest_val, idlest_reg_id;
- s16 prcm_mod;
- int r;
-
- /* Not all modules have multiple clocks that their IDLEST depends on */
- if (clk->ops->find_companion) {
- clk->ops->find_companion(clk, &companion_reg, &other_bit);
- if (!(omap2_clk_readl(clk, companion_reg) & (1 << other_bit)))
- return;
- }
-
- clk->ops->find_idlest(clk, &idlest_reg, &idlest_bit, &idlest_val);
- r = cm_split_idlest_reg(idlest_reg, &prcm_mod, &idlest_reg_id);
- if (r) {
- /* IDLEST register not in the CM module */
- _wait_idlest_generic(clk, idlest_reg, (1 << idlest_bit),
- idlest_val, __clk_get_name(clk->hw.clk));
- } else {
- omap_cm_wait_module_ready(0, prcm_mod, idlest_reg_id,
- idlest_bit);
- };
-}
-
/* Public functions */
/**
@@ -280,174 +203,6 @@ void omap2_init_clk_clkdm(struct clk_hw *hw)
}
/**
- * omap2_clk_dflt_find_companion - find companion clock to @clk
- * @clk: struct clk * to find the companion clock of
- * @other_reg: void __iomem ** to return the companion clock CM_*CLKEN va in
- * @other_bit: u8 ** to return the companion clock bit shift in
- *
- * Note: We don't need special code here for INVERT_ENABLE for the
- * time being since INVERT_ENABLE only applies to clocks enabled by
- * CM_CLKEN_PLL
- *
- * Convert CM_ICLKEN* <-> CM_FCLKEN*. This conversion assumes it's
- * just a matter of XORing the bits.
- *
- * Some clocks don't have companion clocks. For example, modules with
- * only an interface clock (such as MAILBOXES) don't have a companion
- * clock. Right now, this code relies on the hardware exporting a bit
- * in the correct companion register that indicates that the
- * nonexistent 'companion clock' is active. Future patches will
- * associate this type of code with per-module data structures to
- * avoid this issue, and remove the casts. No return value.
- */
-void omap2_clk_dflt_find_companion(struct clk_hw_omap *clk,
- void __iomem **other_reg, u8 *other_bit)
-{
- u32 r;
-
- /*
- * Convert CM_ICLKEN* <-> CM_FCLKEN*. This conversion assumes
- * it's just a matter of XORing the bits.
- */
- r = ((__force u32)clk->enable_reg ^ (CM_FCLKEN ^ CM_ICLKEN));
-
- *other_reg = (__force void __iomem *)r;
- *other_bit = clk->enable_bit;
-}
-
-/**
- * omap2_clk_dflt_find_idlest - find CM_IDLEST reg va, bit shift for @clk
- * @clk: struct clk * to find IDLEST info for
- * @idlest_reg: void __iomem ** to return the CM_IDLEST va in
- * @idlest_bit: u8 * to return the CM_IDLEST bit shift in
- * @idlest_val: u8 * to return the idle status indicator
- *
- * Return the CM_IDLEST register address and bit shift corresponding
- * to the module that "owns" this clock. This default code assumes
- * that the CM_IDLEST bit shift is the CM_*CLKEN bit shift, and that
- * the IDLEST register address ID corresponds to the CM_*CLKEN
- * register address ID (e.g., that CM_FCLKEN2 corresponds to
- * CM_IDLEST2). This is not true for all modules. No return value.
- */
-void omap2_clk_dflt_find_idlest(struct clk_hw_omap *clk,
- void __iomem **idlest_reg, u8 *idlest_bit, u8 *idlest_val)
-{
- u32 r;
-
- r = (((__force u32)clk->enable_reg & ~0xf0) | 0x20);
- *idlest_reg = (__force void __iomem *)r;
- *idlest_bit = clk->enable_bit;
-
- /*
- * 24xx uses 0 to indicate not ready, and 1 to indicate ready.
- * 34xx reverses this, just to keep us on our toes
- * AM35xx uses both, depending on the module.
- */
- *idlest_val = ti_clk_get_features()->cm_idlest_val;
-}
-
-/**
- * omap2_dflt_clk_enable - enable a clock in the hardware
- * @hw: struct clk_hw * of the clock to enable
- *
- * Enable the clock @hw in the hardware. We first call into the OMAP
- * clockdomain code to "enable" the corresponding clockdomain if this
- * is the first enabled user of the clockdomain. Then program the
- * hardware to enable the clock. Then wait for the IP block that uses
- * this clock to leave idle (if applicable). Returns the error value
- * from clkdm_clk_enable() if it terminated with an error, or -EINVAL
- * if @hw has a null clock enable_reg, or zero upon success.
- */
-int omap2_dflt_clk_enable(struct clk_hw *hw)
-{
- struct clk_hw_omap *clk;
- u32 v;
- int ret = 0;
- bool clkdm_control;
-
- if (ti_clk_get_features()->flags & TI_CLK_DISABLE_CLKDM_CONTROL)
- clkdm_control = false;
- else
- clkdm_control = true;
-
- clk = to_clk_hw_omap(hw);
-
- if (clkdm_control && clk->clkdm) {
- ret = clkdm_clk_enable(clk->clkdm, hw->clk);
- if (ret) {
- WARN(1, "%s: could not enable %s's clockdomain %s: %d\n",
- __func__, __clk_get_name(hw->clk),
- clk->clkdm->name, ret);
- return ret;
- }
- }
-
- if (unlikely(clk->enable_reg == NULL)) {
- pr_err("%s: %s missing enable_reg\n", __func__,
- __clk_get_name(hw->clk));
- ret = -EINVAL;
- goto err;
- }
-
- /* FIXME should not have INVERT_ENABLE bit here */
- v = omap2_clk_readl(clk, clk->enable_reg);
- if (clk->flags & INVERT_ENABLE)
- v &= ~(1 << clk->enable_bit);
- else
- v |= (1 << clk->enable_bit);
- omap2_clk_writel(v, clk, clk->enable_reg);
- v = omap2_clk_readl(clk, clk->enable_reg); /* OCP barrier */
-
- if (clk->ops && clk->ops->find_idlest)
- _omap2_module_wait_ready(clk);
-
- return 0;
-
-err:
- if (clkdm_control && clk->clkdm)
- clkdm_clk_disable(clk->clkdm, hw->clk);
- return ret;
-}
-
-/**
- * omap2_dflt_clk_disable - disable a clock in the hardware
- * @hw: struct clk_hw * of the clock to disable
- *
- * Disable the clock @hw in the hardware, and call into the OMAP
- * clockdomain code to "disable" the corresponding clockdomain if all
- * clocks/hwmods in that clockdomain are now disabled. No return
- * value.
- */
-void omap2_dflt_clk_disable(struct clk_hw *hw)
-{
- struct clk_hw_omap *clk;
- u32 v;
-
- clk = to_clk_hw_omap(hw);
- if (!clk->enable_reg) {
- /*
- * 'independent' here refers to a clock which is not
- * controlled by its parent.
- */
- pr_err("%s: independent clock %s has no enable_reg\n",
- __func__, __clk_get_name(hw->clk));
- return;
- }
-
- v = omap2_clk_readl(clk, clk->enable_reg);
- if (clk->flags & INVERT_ENABLE)
- v |= (1 << clk->enable_bit);
- else
- v &= ~(1 << clk->enable_bit);
- omap2_clk_writel(v, clk, clk->enable_reg);
- /* No OCP barrier needed here since it is a disable operation */
-
- if (!(ti_clk_get_features()->flags & TI_CLK_DISABLE_CLKDM_CONTROL) &&
- clk->clkdm)
- clkdm_clk_disable(clk->clkdm, hw->clk);
-}
-
-/**
* omap2_clkops_enable_clkdm - increment usecount on clkdm of @hw
* @hw: struct clk_hw * of the clock being enabled
*
@@ -523,29 +278,6 @@ void omap2_clkops_disable_clkdm(struct clk_hw *hw)
clkdm_clk_disable(clk->clkdm, hw->clk);
}
-/**
- * omap2_dflt_clk_is_enabled - is clock enabled in the hardware?
- * @hw: struct clk_hw * to check
- *
- * Return 1 if the clock represented by @hw is enabled in the
- * hardware, or 0 otherwise. Intended for use in the struct
- * clk_ops.is_enabled function pointer.
- */
-int omap2_dflt_clk_is_enabled(struct clk_hw *hw)
-{
- struct clk_hw_omap *clk = to_clk_hw_omap(hw);
- u32 v;
-
- v = omap2_clk_readl(clk, clk->enable_reg);
-
- if (clk->flags & INVERT_ENABLE)
- v ^= BIT(clk->enable_bit);
-
- v &= BIT(clk->enable_bit);
-
- return v ? 1 : 0;
-}
-
static int __initdata mpurate;
/*
@@ -566,11 +298,6 @@ static int __init omap_clk_setup(char *str)
}
__setup("mpurate=", omap_clk_setup);
-const struct clk_hw_omap_ops clkhwops_wait = {
- .find_idlest = omap2_clk_dflt_find_idlest,
- .find_companion = omap2_clk_dflt_find_companion,
-};
-
/**
* omap2_clk_print_new_rates - print summary of current clock tree rates
* @hfclkin_ck_name: clk name for the off-chip HF oscillator
diff --git a/drivers/clk/ti/Makefile b/drivers/clk/ti/Makefile
index fe2cfa2..fc6fe8c 100644
--- a/drivers/clk/ti/Makefile
+++ b/drivers/clk/ti/Makefile
@@ -1,7 +1,8 @@
obj-y += clk.o autoidle.o clockdomain.o
clk-common = dpll.o composite.o divider.o gate.o \
fixed-factor.o mux.o apll.o \
- clkt_dpll.o clkt_iclk.o dpll3xxx.o
+ clkt_dpll.o clkt_iclk.o dpll3xxx.o \
+ clkt_dflt.o
obj-$(CONFIG_SOC_AM33XX) += $(clk-common) clk-33xx.o
obj-$(CONFIG_SOC_TI81XX) += $(clk-common) fapll.o clk-816x.o
obj-$(CONFIG_ARCH_OMAP2) += $(clk-common) interface.o clk-2xxx.o
diff --git a/drivers/clk/ti/clkt_dflt.c b/drivers/clk/ti/clkt_dflt.c
new file mode 100644
index 0000000..a176b8a
--- /dev/null
+++ b/drivers/clk/ti/clkt_dflt.c
@@ -0,0 +1,316 @@
+/*
+ * Default clock type
+ *
+ * Copyright (C) 2005-2008, 2015 Texas Instruments, Inc.
+ * Copyright (C) 2004-2010 Nokia Corporation
+ *
+ * Contacts:
+ * Richard Woodruff <r-woodruff2@ti.com>
+ * Paul Walmsley
+ * Tero Kristo <t-kristo@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/clk-provider.h>
+#include <linux/io.h>
+#include <linux/clk/ti.h>
+#include <linux/delay.h>
+
+#include "clock.h"
+
+/*
+ * MAX_MODULE_ENABLE_WAIT: maximum of number of microseconds to wait
+ * for a module to indicate that it is no longer in idle
+ */
+#define MAX_MODULE_ENABLE_WAIT 100000
+
+/*
+ * CM module register offsets, used for calculating the companion
+ * register addresses.
+ */
+#define CM_FCLKEN 0x0000
+#define CM_ICLKEN 0x0010
+
+/**
+ * _wait_idlest_generic - wait for a module to leave the idle state
+ * @clk: module clock to wait for (needed for register offsets)
+ * @reg: virtual address of module IDLEST register
+ * @mask: value to mask against to determine if the module is active
+ * @idlest: idle state indicator (0 or 1) for the clock
+ * @name: name of the clock (for printk)
+ *
+ * Wait for a module to leave idle, where its idle-status register is
+ * not inside the CM module. Returns 1 if the module left idle
+ * promptly, or 0 if the module did not leave idle before the timeout
+ * elapsed. XXX Deprecated - should be moved into drivers for the
+ * individual IP block that the IDLEST register exists in.
+ */
+static int _wait_idlest_generic(struct clk_hw_omap *clk, void __iomem *reg,
+ u32 mask, u8 idlest, const char *name)
+{
+ int i = 0, ena = 0;
+
+ ena = (idlest) ? 0 : mask;
+
+ /* Wait until module enters enabled state */
+ for (i = 0; i < MAX_MODULE_ENABLE_WAIT; i++) {
+ if ((ti_clk_ll_ops->clk_readl(reg) & mask) == ena)
+ break;
+ udelay(1);
+ }
+
+ if (i < MAX_MODULE_ENABLE_WAIT)
+ pr_debug("omap clock: module associated with clock %s ready after %d loops\n",
+ name, i);
+ else
+ pr_err("omap clock: module associated with clock %s didn't enable in %d tries\n",
+ name, MAX_MODULE_ENABLE_WAIT);
+
+ return (i < MAX_MODULE_ENABLE_WAIT) ? 1 : 0;
+}
+
+/**
+ * _omap2_module_wait_ready - wait for an OMAP module to leave IDLE
+ * @clk: struct clk * belonging to the module
+ *
+ * If the necessary clocks for the OMAP hardware IP block that
+ * corresponds to clock @clk are enabled, then wait for the module to
+ * indicate readiness (i.e., to leave IDLE). This code does not
+ * belong in the clock code and will be moved in the medium term to
+ * module-dependent code. No return value.
+ */
+static void _omap2_module_wait_ready(struct clk_hw_omap *clk)
+{
+ void __iomem *companion_reg, *idlest_reg;
+ u8 other_bit, idlest_bit, idlest_val, idlest_reg_id;
+ s16 prcm_mod;
+ int r;
+
+ /* Not all modules have multiple clocks that their IDLEST depends on */
+ if (clk->ops->find_companion) {
+ clk->ops->find_companion(clk, &companion_reg, &other_bit);
+ if (!(ti_clk_ll_ops->clk_readl(companion_reg) &
+ (1 << other_bit)))
+ return;
+ }
+
+ clk->ops->find_idlest(clk, &idlest_reg, &idlest_bit, &idlest_val);
+ r = ti_clk_ll_ops->cm_split_idlest_reg(idlest_reg, &prcm_mod,
+ &idlest_reg_id);
+ if (r) {
+ /* IDLEST register not in the CM module */
+ _wait_idlest_generic(clk, idlest_reg, (1 << idlest_bit),
+ idlest_val, __clk_get_name(clk->hw.clk));
+ } else {
+ ti_clk_ll_ops->cm_wait_module_ready(0, prcm_mod, idlest_reg_id,
+ idlest_bit);
+ }
+}
+
+/**
+ * omap2_clk_dflt_find_companion - find companion clock to @clk
+ * @clk: struct clk * to find the companion clock of
+ * @other_reg: void __iomem ** to return the companion clock CM_*CLKEN va in
+ * @other_bit: u8 ** to return the companion clock bit shift in
+ *
+ * Note: We don't need special code here for INVERT_ENABLE for the
+ * time being since INVERT_ENABLE only applies to clocks enabled by
+ * CM_CLKEN_PLL
+ *
+ * Convert CM_ICLKEN* <-> CM_FCLKEN*. This conversion assumes it's
+ * just a matter of XORing the bits.
+ *
+ * Some clocks don't have companion clocks. For example, modules with
+ * only an interface clock (such as MAILBOXES) don't have a companion
+ * clock. Right now, this code relies on the hardware exporting a bit
+ * in the correct companion register that indicates that the
+ * nonexistent 'companion clock' is active. Future patches will
+ * associate this type of code with per-module data structures to
+ * avoid this issue, and remove the casts. No return value.
+ */
+void omap2_clk_dflt_find_companion(struct clk_hw_omap *clk,
+ void __iomem **other_reg, u8 *other_bit)
+{
+ u32 r;
+
+ /*
+ * Convert CM_ICLKEN* <-> CM_FCLKEN*. This conversion assumes
+ * it's just a matter of XORing the bits.
+ */
+ r = ((__force u32)clk->enable_reg ^ (CM_FCLKEN ^ CM_ICLKEN));
+
+ *other_reg = (__force void __iomem *)r;
+ *other_bit = clk->enable_bit;
+}
+
+/**
+ * omap2_clk_dflt_find_idlest - find CM_IDLEST reg va, bit shift for @clk
+ * @clk: struct clk * to find IDLEST info for
+ * @idlest_reg: void __iomem ** to return the CM_IDLEST va in
+ * @idlest_bit: u8 * to return the CM_IDLEST bit shift in
+ * @idlest_val: u8 * to return the idle status indicator
+ *
+ * Return the CM_IDLEST register address and bit shift corresponding
+ * to the module that "owns" this clock. This default code assumes
+ * that the CM_IDLEST bit shift is the CM_*CLKEN bit shift, and that
+ * the IDLEST register address ID corresponds to the CM_*CLKEN
+ * register address ID (e.g., that CM_FCLKEN2 corresponds to
+ * CM_IDLEST2). This is not true for all modules. No return value.
+ */
+void omap2_clk_dflt_find_idlest(struct clk_hw_omap *clk,
+ void __iomem **idlest_reg, u8 *idlest_bit,
+ u8 *idlest_val)
+{
+ u32 r;
+
+ r = (((__force u32)clk->enable_reg & ~0xf0) | 0x20);
+ *idlest_reg = (__force void __iomem *)r;
+ *idlest_bit = clk->enable_bit;
+
+ /*
+ * 24xx uses 0 to indicate not ready, and 1 to indicate ready.
+ * 34xx reverses this, just to keep us on our toes
+ * AM35xx uses both, depending on the module.
+ */
+ *idlest_val = ti_clk_get_features()->cm_idlest_val;
+}
+
+/**
+ * omap2_dflt_clk_enable - enable a clock in the hardware
+ * @hw: struct clk_hw * of the clock to enable
+ *
+ * Enable the clock @hw in the hardware. We first call into the OMAP
+ * clockdomain code to "enable" the corresponding clockdomain if this
+ * is the first enabled user of the clockdomain. Then program the
+ * hardware to enable the clock. Then wait for the IP block that uses
+ * this clock to leave idle (if applicable). Returns the error value
+ * from clkdm_clk_enable() if it terminated with an error, or -EINVAL
+ * if @hw has a null clock enable_reg, or zero upon success.
+ */
+int omap2_dflt_clk_enable(struct clk_hw *hw)
+{
+ struct clk_hw_omap *clk;
+ u32 v;
+ int ret = 0;
+ bool clkdm_control;
+
+ if (ti_clk_get_features()->flags & TI_CLK_DISABLE_CLKDM_CONTROL)
+ clkdm_control = false;
+ else
+ clkdm_control = true;
+
+ clk = to_clk_hw_omap(hw);
+
+ if (clkdm_control && clk->clkdm) {
+ ret = ti_clk_ll_ops->clkdm_clk_enable(clk->clkdm, hw->clk);
+ if (ret) {
+ WARN(1,
+ "%s: could not enable %s's clockdomain %s: %d\n",
+ __func__, __clk_get_name(hw->clk),
+ clk->clkdm_name, ret);
+ return ret;
+ }
+ }
+
+ if (unlikely(!clk->enable_reg)) {
+ pr_err("%s: %s missing enable_reg\n", __func__,
+ __clk_get_name(hw->clk));
+ ret = -EINVAL;
+ goto err;
+ }
+
+ /* FIXME should not have INVERT_ENABLE bit here */
+ v = ti_clk_ll_ops->clk_readl(clk->enable_reg);
+ if (clk->flags & INVERT_ENABLE)
+ v &= ~(1 << clk->enable_bit);
+ else
+ v |= (1 << clk->enable_bit);
+ ti_clk_ll_ops->clk_writel(v, clk->enable_reg);
+ v = ti_clk_ll_ops->clk_readl(clk->enable_reg); /* OCP barrier */
+
+ if (clk->ops && clk->ops->find_idlest)
+ _omap2_module_wait_ready(clk);
+
+ return 0;
+
+err:
+ if (clkdm_control && clk->clkdm)
+ ti_clk_ll_ops->clkdm_clk_disable(clk->clkdm, hw->clk);
+ return ret;
+}
+
+/**
+ * omap2_dflt_clk_disable - disable a clock in the hardware
+ * @hw: struct clk_hw * of the clock to disable
+ *
+ * Disable the clock @hw in the hardware, and call into the OMAP
+ * clockdomain code to "disable" the corresponding clockdomain if all
+ * clocks/hwmods in that clockdomain are now disabled. No return
+ * value.
+ */
+void omap2_dflt_clk_disable(struct clk_hw *hw)
+{
+ struct clk_hw_omap *clk;
+ u32 v;
+
+ clk = to_clk_hw_omap(hw);
+ if (!clk->enable_reg) {
+ /*
+ * 'independent' here refers to a clock which is not
+ * controlled by its parent.
+ */
+ pr_err("%s: independent clock %s has no enable_reg\n",
+ __func__, __clk_get_name(hw->clk));
+ return;
+ }
+
+ v = ti_clk_ll_ops->clk_readl(clk->enable_reg);
+ if (clk->flags & INVERT_ENABLE)
+ v |= (1 << clk->enable_bit);
+ else
+ v &= ~(1 << clk->enable_bit);
+ ti_clk_ll_ops->clk_writel(v, clk->enable_reg);
+ /* No OCP barrier needed here since it is a disable operation */
+
+ if (!(ti_clk_get_features()->flags & TI_CLK_DISABLE_CLKDM_CONTROL) &&
+ clk->clkdm)
+ ti_clk_ll_ops->clkdm_clk_disable(clk->clkdm, hw->clk);
+}
+
+/**
+ * omap2_dflt_clk_is_enabled - is clock enabled in the hardware?
+ * @hw: struct clk_hw * to check
+ *
+ * Return 1 if the clock represented by @hw is enabled in the
+ * hardware, or 0 otherwise. Intended for use in the struct
+ * clk_ops.is_enabled function pointer.
+ */
+int omap2_dflt_clk_is_enabled(struct clk_hw *hw)
+{
+ struct clk_hw_omap *clk = to_clk_hw_omap(hw);
+ u32 v;
+
+ v = ti_clk_ll_ops->clk_readl(clk->enable_reg);
+
+ if (clk->flags & INVERT_ENABLE)
+ v ^= BIT(clk->enable_bit);
+
+ v &= BIT(clk->enable_bit);
+
+ return v ? 1 : 0;
+}
+
+const struct clk_hw_omap_ops clkhwops_wait = {
+ .find_idlest = omap2_clk_dflt_find_idlest,
+ .find_companion = omap2_clk_dflt_find_companion,
+};
diff --git a/drivers/clk/ti/clock.h b/drivers/clk/ti/clock.h
index 688d9e4..f215383 100644
--- a/drivers/clk/ti/clock.h
+++ b/drivers/clk/ti/clock.h
@@ -175,9 +175,14 @@ void omap2_clk_enable_init_clocks(const char **clk_names, u8 num_clocks);
extern const struct clk_hw_omap_ops clkhwops_omap3_dpll;
extern const struct clk_hw_omap_ops clkhwops_omap4_dpllmx;
+extern const struct clk_hw_omap_ops clkhwops_wait;
extern const struct clk_hw_omap_ops clkhwops_iclk;
extern const struct clk_hw_omap_ops clkhwops_iclk_wait;
+int omap2_dflt_clk_enable(struct clk_hw *hw);
+void omap2_dflt_clk_disable(struct clk_hw *hw);
+int omap2_dflt_clk_is_enabled(struct clk_hw *hw);
+
u8 omap2_init_dpll_parent(struct clk_hw *hw);
int omap3_noncore_dpll_enable(struct clk_hw *hw);
void omap3_noncore_dpll_disable(struct clk_hw *hw);
diff --git a/include/linux/clk/ti.h b/include/linux/clk/ti.h
index 3dadb74..891fe0f 100644
--- a/include/linux/clk/ti.h
+++ b/include/linux/clk/ti.h
@@ -278,9 +278,6 @@ int omap2_clk_disable_autoidle_all(void);
int omap2_clk_enable_autoidle_all(void);
int omap2_clk_allow_idle(struct clk *clk);
int omap2_clk_deny_idle(struct clk *clk);
-int omap2_dflt_clk_enable(struct clk_hw *hw);
-void omap2_dflt_clk_disable(struct clk_hw *hw);
-int omap2_dflt_clk_is_enabled(struct clk_hw *hw);
void omap2_clkt_iclk_allow_idle(struct clk_hw_omap *clk);
void omap2_clkt_iclk_deny_idle(struct clk_hw_omap *clk);
void omap2_clk_dflt_find_companion(struct clk_hw_omap *clk,
@@ -337,7 +334,6 @@ struct ti_clk_features *ti_clk_get_features(void);
extern const struct clk_hw_omap_ops clkhwops_omap2xxx_dpll;
extern const struct clk_hw_omap_ops clkhwops_omap2430_i2chs_wait;
-extern const struct clk_hw_omap_ops clkhwops_wait;
extern const struct clk_hw_omap_ops clkhwops_omap3430es2_dss_usbhost_wait;
extern const struct clk_hw_omap_ops clkhwops_am35xx_ipss_module_wait;
extern const struct clk_hw_omap_ops clkhwops_am35xx_ipss_wait;
--
1.7.9.5
^ permalink raw reply related [flat|nested] 120+ messages in thread
* [PATCHv2 17/27] clk: ti: dflt: move support for default gate clock to clock driver
@ 2015-05-11 8:54 ` Tero Kristo
0 siblings, 0 replies; 120+ messages in thread
From: Tero Kristo @ 2015-05-11 8:54 UTC (permalink / raw)
To: mturquette, tony, linux-omap, linux-clk, sboyd, paul; +Cc: linux-arm-kernel
With the legacy support gone, OMAP2+ default gate clock can be moved
under clock driver. Create a new file for the purpose, and clean-up
the header exports a bit as some clock APIs are no longer needed
outside clock driver itself.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
---
arch/arm/mach-omap2/clock.c | 273 -------------------------------------
drivers/clk/ti/Makefile | 3 +-
drivers/clk/ti/clkt_dflt.c | 316 +++++++++++++++++++++++++++++++++++++++++++
drivers/clk/ti/clock.h | 5 +
include/linux/clk/ti.h | 4 -
5 files changed, 323 insertions(+), 278 deletions(-)
create mode 100644 drivers/clk/ti/clkt_dflt.c
diff --git a/arch/arm/mach-omap2/clock.c b/arch/arm/mach-omap2/clock.c
index 6c17adf..38a336b 100644
--- a/arch/arm/mach-omap2/clock.c
+++ b/arch/arm/mach-omap2/clock.c
@@ -40,12 +40,6 @@
#include "cm-regbits-34xx.h"
#include "common.h"
-/*
- * MAX_MODULE_ENABLE_WAIT: maximum of number of microseconds to wait
- * for a module to indicate that it is no longer in idle
- */
-#define MAX_MODULE_ENABLE_WAIT 100000
-
u16 cpu_mask;
/* DPLL valid Fint frequency band limits - from 34xx TRM Section 4.7.6.2 */
@@ -176,77 +170,6 @@ void __init omap2_clk_legacy_provider_init(int index, void __iomem *mem)
/* Private functions */
-
-/**
- * _wait_idlest_generic - wait for a module to leave the idle state
- * @clk: module clock to wait for (needed for register offsets)
- * @reg: virtual address of module IDLEST register
- * @mask: value to mask against to determine if the module is active
- * @idlest: idle state indicator (0 or 1) for the clock
- * @name: name of the clock (for printk)
- *
- * Wait for a module to leave idle, where its idle-status register is
- * not inside the CM module. Returns 1 if the module left idle
- * promptly, or 0 if the module did not leave idle before the timeout
- * elapsed. XXX Deprecated - should be moved into drivers for the
- * individual IP block that the IDLEST register exists in.
- */
-static int _wait_idlest_generic(struct clk_hw_omap *clk, void __iomem *reg,
- u32 mask, u8 idlest, const char *name)
-{
- int i = 0, ena = 0;
-
- ena = (idlest) ? 0 : mask;
-
- omap_test_timeout(((omap2_clk_readl(clk, reg) & mask) == ena),
- MAX_MODULE_ENABLE_WAIT, i);
-
- if (i < MAX_MODULE_ENABLE_WAIT)
- pr_debug("omap clock: module associated with clock %s ready after %d loops\n",
- name, i);
- else
- pr_err("omap clock: module associated with clock %s didn't enable in %d tries\n",
- name, MAX_MODULE_ENABLE_WAIT);
-
- return (i < MAX_MODULE_ENABLE_WAIT) ? 1 : 0;
-};
-
-/**
- * _omap2_module_wait_ready - wait for an OMAP module to leave IDLE
- * @clk: struct clk * belonging to the module
- *
- * If the necessary clocks for the OMAP hardware IP block that
- * corresponds to clock @clk are enabled, then wait for the module to
- * indicate readiness (i.e., to leave IDLE). This code does not
- * belong in the clock code and will be moved in the medium term to
- * module-dependent code. No return value.
- */
-static void _omap2_module_wait_ready(struct clk_hw_omap *clk)
-{
- void __iomem *companion_reg, *idlest_reg;
- u8 other_bit, idlest_bit, idlest_val, idlest_reg_id;
- s16 prcm_mod;
- int r;
-
- /* Not all modules have multiple clocks that their IDLEST depends on */
- if (clk->ops->find_companion) {
- clk->ops->find_companion(clk, &companion_reg, &other_bit);
- if (!(omap2_clk_readl(clk, companion_reg) & (1 << other_bit)))
- return;
- }
-
- clk->ops->find_idlest(clk, &idlest_reg, &idlest_bit, &idlest_val);
- r = cm_split_idlest_reg(idlest_reg, &prcm_mod, &idlest_reg_id);
- if (r) {
- /* IDLEST register not in the CM module */
- _wait_idlest_generic(clk, idlest_reg, (1 << idlest_bit),
- idlest_val, __clk_get_name(clk->hw.clk));
- } else {
- omap_cm_wait_module_ready(0, prcm_mod, idlest_reg_id,
- idlest_bit);
- };
-}
-
/* Public functions */
/**
@@ -280,174 +203,6 @@ void omap2_init_clk_clkdm(struct clk_hw *hw)
}
/**
- * omap2_clk_dflt_find_companion - find companion clock to @clk
- * @clk: struct clk * to find the companion clock of
- * @other_reg: void __iomem ** to return the companion clock CM_*CLKEN va in
- * @other_bit: u8 ** to return the companion clock bit shift in
- *
- * Note: We don't need special code here for INVERT_ENABLE for the
- * time being since INVERT_ENABLE only applies to clocks enabled by
- * CM_CLKEN_PLL
- *
- * Convert CM_ICLKEN* <-> CM_FCLKEN*. This conversion assumes it's
- * just a matter of XORing the bits.
- *
- * Some clocks don't have companion clocks. For example, modules with
- * only an interface clock (such as MAILBOXES) don't have a companion
- * clock. Right now, this code relies on the hardware exporting a bit
- * in the correct companion register that indicates that the
- * nonexistent 'companion clock' is active. Future patches will
- * associate this type of code with per-module data structures to
- * avoid this issue, and remove the casts. No return value.
- */
-void omap2_clk_dflt_find_companion(struct clk_hw_omap *clk,
- void __iomem **other_reg, u8 *other_bit)
-{
- u32 r;
-
- /*
- * Convert CM_ICLKEN* <-> CM_FCLKEN*. This conversion assumes
- * it's just a matter of XORing the bits.
- */
- r = ((__force u32)clk->enable_reg ^ (CM_FCLKEN ^ CM_ICLKEN));
-
- *other_reg = (__force void __iomem *)r;
- *other_bit = clk->enable_bit;
-}
-
-/**
- * omap2_clk_dflt_find_idlest - find CM_IDLEST reg va, bit shift for @clk
- * @clk: struct clk * to find IDLEST info for
- * @idlest_reg: void __iomem ** to return the CM_IDLEST va in
- * @idlest_bit: u8 * to return the CM_IDLEST bit shift in
- * @idlest_val: u8 * to return the idle status indicator
- *
- * Return the CM_IDLEST register address and bit shift corresponding
- * to the module that "owns" this clock. This default code assumes
- * that the CM_IDLEST bit shift is the CM_*CLKEN bit shift, and that
- * the IDLEST register address ID corresponds to the CM_*CLKEN
- * register address ID (e.g., that CM_FCLKEN2 corresponds to
- * CM_IDLEST2). This is not true for all modules. No return value.
- */
-void omap2_clk_dflt_find_idlest(struct clk_hw_omap *clk,
- void __iomem **idlest_reg, u8 *idlest_bit, u8 *idlest_val)
-{
- u32 r;
-
- r = (((__force u32)clk->enable_reg & ~0xf0) | 0x20);
- *idlest_reg = (__force void __iomem *)r;
- *idlest_bit = clk->enable_bit;
-
- /*
- * 24xx uses 0 to indicate not ready, and 1 to indicate ready.
- * 34xx reverses this, just to keep us on our toes
- * AM35xx uses both, depending on the module.
- */
- *idlest_val = ti_clk_get_features()->cm_idlest_val;
-}
-
-/**
- * omap2_dflt_clk_enable - enable a clock in the hardware
- * @hw: struct clk_hw * of the clock to enable
- *
- * Enable the clock @hw in the hardware. We first call into the OMAP
- * clockdomain code to "enable" the corresponding clockdomain if this
- * is the first enabled user of the clockdomain. Then program the
- * hardware to enable the clock. Then wait for the IP block that uses
- * this clock to leave idle (if applicable). Returns the error value
- * from clkdm_clk_enable() if it terminated with an error, or -EINVAL
- * if @hw has a null clock enable_reg, or zero upon success.
- */
-int omap2_dflt_clk_enable(struct clk_hw *hw)
-{
- struct clk_hw_omap *clk;
- u32 v;
- int ret = 0;
- bool clkdm_control;
-
- if (ti_clk_get_features()->flags & TI_CLK_DISABLE_CLKDM_CONTROL)
- clkdm_control = false;
- else
- clkdm_control = true;
-
- clk = to_clk_hw_omap(hw);
-
- if (clkdm_control && clk->clkdm) {
- ret = clkdm_clk_enable(clk->clkdm, hw->clk);
- if (ret) {
- WARN(1, "%s: could not enable %s's clockdomain %s: %d\n",
- __func__, __clk_get_name(hw->clk),
- clk->clkdm->name, ret);
- return ret;
- }
- }
-
- if (unlikely(clk->enable_reg == NULL)) {
- pr_err("%s: %s missing enable_reg\n", __func__,
- __clk_get_name(hw->clk));
- ret = -EINVAL;
- goto err;
- }
-
- /* FIXME should not have INVERT_ENABLE bit here */
- v = omap2_clk_readl(clk, clk->enable_reg);
- if (clk->flags & INVERT_ENABLE)
- v &= ~(1 << clk->enable_bit);
- else
- v |= (1 << clk->enable_bit);
- omap2_clk_writel(v, clk, clk->enable_reg);
- v = omap2_clk_readl(clk, clk->enable_reg); /* OCP barrier */
-
- if (clk->ops && clk->ops->find_idlest)
- _omap2_module_wait_ready(clk);
-
- return 0;
-
-err:
- if (clkdm_control && clk->clkdm)
- clkdm_clk_disable(clk->clkdm, hw->clk);
- return ret;
-}
-
-/**
- * omap2_dflt_clk_disable - disable a clock in the hardware
- * @hw: struct clk_hw * of the clock to disable
- *
- * Disable the clock @hw in the hardware, and call into the OMAP
- * clockdomain code to "disable" the corresponding clockdomain if all
- * clocks/hwmods in that clockdomain are now disabled. No return
- * value.
- */
-void omap2_dflt_clk_disable(struct clk_hw *hw)
-{
- struct clk_hw_omap *clk;
- u32 v;
-
- clk = to_clk_hw_omap(hw);
- if (!clk->enable_reg) {
- /*
- * 'independent' here refers to a clock which is not
- * controlled by its parent.
- */
- pr_err("%s: independent clock %s has no enable_reg\n",
- __func__, __clk_get_name(hw->clk));
- return;
- }
-
- v = omap2_clk_readl(clk, clk->enable_reg);
- if (clk->flags & INVERT_ENABLE)
- v |= (1 << clk->enable_bit);
- else
- v &= ~(1 << clk->enable_bit);
- omap2_clk_writel(v, clk, clk->enable_reg);
- /* No OCP barrier needed here since it is a disable operation */
-
- if (!(ti_clk_get_features()->flags & TI_CLK_DISABLE_CLKDM_CONTROL) &&
- clk->clkdm)
- clkdm_clk_disable(clk->clkdm, hw->clk);
-}
-
-/**
* omap2_clkops_enable_clkdm - increment usecount on clkdm of @hw
* @hw: struct clk_hw * of the clock being enabled
*
@@ -523,29 +278,6 @@ void omap2_clkops_disable_clkdm(struct clk_hw *hw)
clkdm_clk_disable(clk->clkdm, hw->clk);
}
-/**
- * omap2_dflt_clk_is_enabled - is clock enabled in the hardware?
- * @hw: struct clk_hw * to check
- *
- * Return 1 if the clock represented by @hw is enabled in the
- * hardware, or 0 otherwise. Intended for use in the struct
- * clk_ops.is_enabled function pointer.
- */
-int omap2_dflt_clk_is_enabled(struct clk_hw *hw)
-{
- struct clk_hw_omap *clk = to_clk_hw_omap(hw);
- u32 v;
-
- v = omap2_clk_readl(clk, clk->enable_reg);
-
- if (clk->flags & INVERT_ENABLE)
- v ^= BIT(clk->enable_bit);
-
- v &= BIT(clk->enable_bit);
-
- return v ? 1 : 0;
-}
-
static int __initdata mpurate;
/*
@@ -566,11 +298,6 @@ static int __init omap_clk_setup(char *str)
}
__setup("mpurate=", omap_clk_setup);
-const struct clk_hw_omap_ops clkhwops_wait = {
- .find_idlest = omap2_clk_dflt_find_idlest,
- .find_companion = omap2_clk_dflt_find_companion,
-};
-
/**
* omap2_clk_print_new_rates - print summary of current clock tree rates
* @hfclkin_ck_name: clk name for the off-chip HF oscillator
diff --git a/drivers/clk/ti/Makefile b/drivers/clk/ti/Makefile
index fe2cfa2..fc6fe8c 100644
--- a/drivers/clk/ti/Makefile
+++ b/drivers/clk/ti/Makefile
@@ -1,7 +1,8 @@
obj-y += clk.o autoidle.o clockdomain.o
clk-common = dpll.o composite.o divider.o gate.o \
fixed-factor.o mux.o apll.o \
- clkt_dpll.o clkt_iclk.o dpll3xxx.o
+ clkt_dpll.o clkt_iclk.o dpll3xxx.o \
+ clkt_dflt.o
obj-$(CONFIG_SOC_AM33XX) += $(clk-common) clk-33xx.o
obj-$(CONFIG_SOC_TI81XX) += $(clk-common) fapll.o clk-816x.o
obj-$(CONFIG_ARCH_OMAP2) += $(clk-common) interface.o clk-2xxx.o
diff --git a/drivers/clk/ti/clkt_dflt.c b/drivers/clk/ti/clkt_dflt.c
new file mode 100644
index 0000000..a176b8a
--- /dev/null
+++ b/drivers/clk/ti/clkt_dflt.c
@@ -0,0 +1,316 @@
+/*
+ * Default clock type
+ *
+ * Copyright (C) 2005-2008, 2015 Texas Instruments, Inc.
+ * Copyright (C) 2004-2010 Nokia Corporation
+ *
+ * Contacts:
+ * Richard Woodruff <r-woodruff2@ti.com>
+ * Paul Walmsley
+ * Tero Kristo <t-kristo@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/clk-provider.h>
+#include <linux/io.h>
+#include <linux/clk/ti.h>
+#include <linux/delay.h>
+
+#include "clock.h"
+
+/*
+ * MAX_MODULE_ENABLE_WAIT: maximum of number of microseconds to wait
+ * for a module to indicate that it is no longer in idle
+ */
+#define MAX_MODULE_ENABLE_WAIT 100000
+
+/*
+ * CM module register offsets, used for calculating the companion
+ * register addresses.
+ */
+#define CM_FCLKEN 0x0000
+#define CM_ICLKEN 0x0010
+
+/**
+ * _wait_idlest_generic - wait for a module to leave the idle state
+ * @clk: module clock to wait for (needed for register offsets)
+ * @reg: virtual address of module IDLEST register
+ * @mask: value to mask against to determine if the module is active
+ * @idlest: idle state indicator (0 or 1) for the clock
+ * @name: name of the clock (for printk)
+ *
+ * Wait for a module to leave idle, where its idle-status register is
+ * not inside the CM module. Returns 1 if the module left idle
+ * promptly, or 0 if the module did not leave idle before the timeout
+ * elapsed. XXX Deprecated - should be moved into drivers for the
+ * individual IP block that the IDLEST register exists in.
+ */
+static int _wait_idlest_generic(struct clk_hw_omap *clk, void __iomem *reg,
+ u32 mask, u8 idlest, const char *name)
+{
+ int i = 0, ena = 0;
+
+ ena = (idlest) ? 0 : mask;
+
+ /* Wait until module enters enabled state */
+ for (i = 0; i < MAX_MODULE_ENABLE_WAIT; i++) {
+ if ((ti_clk_ll_ops->clk_readl(reg) & mask) == ena)
+ break;
+ udelay(1);
+ }
+
+ if (i < MAX_MODULE_ENABLE_WAIT)
+ pr_debug("omap clock: module associated with clock %s ready after %d loops\n",
+ name, i);
+ else
+ pr_err("omap clock: module associated with clock %s didn't enable in %d tries\n",
+ name, MAX_MODULE_ENABLE_WAIT);
+
+ return (i < MAX_MODULE_ENABLE_WAIT) ? 1 : 0;
+}
+
+/**
+ * _omap2_module_wait_ready - wait for an OMAP module to leave IDLE
+ * @clk: struct clk * belonging to the module
+ *
+ * If the necessary clocks for the OMAP hardware IP block that
+ * corresponds to clock @clk are enabled, then wait for the module to
+ * indicate readiness (i.e., to leave IDLE). This code does not
+ * belong in the clock code and will be moved in the medium term to
+ * module-dependent code. No return value.
+ */
+static void _omap2_module_wait_ready(struct clk_hw_omap *clk)
+{
+ void __iomem *companion_reg, *idlest_reg;
+ u8 other_bit, idlest_bit, idlest_val, idlest_reg_id;
+ s16 prcm_mod;
+ int r;
+
+ /* Not all modules have multiple clocks that their IDLEST depends on */
+ if (clk->ops->find_companion) {
+ clk->ops->find_companion(clk, &companion_reg, &other_bit);
+ if (!(ti_clk_ll_ops->clk_readl(companion_reg) &
+ (1 << other_bit)))
+ return;
+ }
+
+ clk->ops->find_idlest(clk, &idlest_reg, &idlest_bit, &idlest_val);
+ r = ti_clk_ll_ops->cm_split_idlest_reg(idlest_reg, &prcm_mod,
+ &idlest_reg_id);
+ if (r) {
+ /* IDLEST register not in the CM module */
+ _wait_idlest_generic(clk, idlest_reg, (1 << idlest_bit),
+ idlest_val, __clk_get_name(clk->hw.clk));
+ } else {
+ ti_clk_ll_ops->cm_wait_module_ready(0, prcm_mod, idlest_reg_id,
+ idlest_bit);
+ }
+}
+
+/**
+ * omap2_clk_dflt_find_companion - find companion clock to @clk
+ * @clk: struct clk * to find the companion clock of
+ * @other_reg: void __iomem ** to return the companion clock CM_*CLKEN va in
+ * @other_bit: u8 ** to return the companion clock bit shift in
+ *
+ * Note: We don't need special code here for INVERT_ENABLE for the
+ * time being since INVERT_ENABLE only applies to clocks enabled by
+ * CM_CLKEN_PLL
+ *
+ * Convert CM_ICLKEN* <-> CM_FCLKEN*. This conversion assumes it's
+ * just a matter of XORing the bits.
+ *
+ * Some clocks don't have companion clocks. For example, modules with
+ * only an interface clock (such as MAILBOXES) don't have a companion
+ * clock. Right now, this code relies on the hardware exporting a bit
+ * in the correct companion register that indicates that the
+ * nonexistent 'companion clock' is active. Future patches will
+ * associate this type of code with per-module data structures to
+ * avoid this issue, and remove the casts. No return value.
+ */
+void omap2_clk_dflt_find_companion(struct clk_hw_omap *clk,
+ void __iomem **other_reg, u8 *other_bit)
+{
+ u32 r;
+
+ /*
+ * Convert CM_ICLKEN* <-> CM_FCLKEN*. This conversion assumes
+ * it's just a matter of XORing the bits.
+ */
+ r = ((__force u32)clk->enable_reg ^ (CM_FCLKEN ^ CM_ICLKEN));
+
+ *other_reg = (__force void __iomem *)r;
+ *other_bit = clk->enable_bit;
+}
+
+/**
+ * omap2_clk_dflt_find_idlest - find CM_IDLEST reg va, bit shift for @clk
+ * @clk: struct clk * to find IDLEST info for
+ * @idlest_reg: void __iomem ** to return the CM_IDLEST va in
+ * @idlest_bit: u8 * to return the CM_IDLEST bit shift in
+ * @idlest_val: u8 * to return the idle status indicator
+ *
+ * Return the CM_IDLEST register address and bit shift corresponding
+ * to the module that "owns" this clock. This default code assumes
+ * that the CM_IDLEST bit shift is the CM_*CLKEN bit shift, and that
+ * the IDLEST register address ID corresponds to the CM_*CLKEN
+ * register address ID (e.g., that CM_FCLKEN2 corresponds to
+ * CM_IDLEST2). This is not true for all modules. No return value.
+ */
+void omap2_clk_dflt_find_idlest(struct clk_hw_omap *clk,
+ void __iomem **idlest_reg, u8 *idlest_bit,
+ u8 *idlest_val)
+{
+ u32 r;
+
+ r = (((__force u32)clk->enable_reg & ~0xf0) | 0x20);
+ *idlest_reg = (__force void __iomem *)r;
+ *idlest_bit = clk->enable_bit;
+
+ /*
+ * 24xx uses 0 to indicate not ready, and 1 to indicate ready.
+ * 34xx reverses this, just to keep us on our toes
+ * AM35xx uses both, depending on the module.
+ */
+ *idlest_val = ti_clk_get_features()->cm_idlest_val;
+}
+
+/**
+ * omap2_dflt_clk_enable - enable a clock in the hardware
+ * @hw: struct clk_hw * of the clock to enable
+ *
+ * Enable the clock @hw in the hardware. We first call into the OMAP
+ * clockdomain code to "enable" the corresponding clockdomain if this
+ * is the first enabled user of the clockdomain. Then program the
+ * hardware to enable the clock. Then wait for the IP block that uses
+ * this clock to leave idle (if applicable). Returns the error value
+ * from clkdm_clk_enable() if it terminated with an error, or -EINVAL
+ * if @hw has a null clock enable_reg, or zero upon success.
+ */
+int omap2_dflt_clk_enable(struct clk_hw *hw)
+{
+ struct clk_hw_omap *clk;
+ u32 v;
+ int ret = 0;
+ bool clkdm_control;
+
+ if (ti_clk_get_features()->flags & TI_CLK_DISABLE_CLKDM_CONTROL)
+ clkdm_control = false;
+ else
+ clkdm_control = true;
+
+ clk = to_clk_hw_omap(hw);
+
+ if (clkdm_control && clk->clkdm) {
+ ret = ti_clk_ll_ops->clkdm_clk_enable(clk->clkdm, hw->clk);
+ if (ret) {
+ WARN(1,
+ "%s: could not enable %s's clockdomain %s: %d\n",
+ __func__, __clk_get_name(hw->clk),
+ clk->clkdm_name, ret);
+ return ret;
+ }
+ }
+
+ if (unlikely(!clk->enable_reg)) {
+ pr_err("%s: %s missing enable_reg\n", __func__,
+ __clk_get_name(hw->clk));
+ ret = -EINVAL;
+ goto err;
+ }
+
+ /* FIXME should not have INVERT_ENABLE bit here */
+ v = ti_clk_ll_ops->clk_readl(clk->enable_reg);
+ if (clk->flags & INVERT_ENABLE)
+ v &= ~(1 << clk->enable_bit);
+ else
+ v |= (1 << clk->enable_bit);
+ ti_clk_ll_ops->clk_writel(v, clk->enable_reg);
+ v = ti_clk_ll_ops->clk_readl(clk->enable_reg); /* OCP barrier */
+
+ if (clk->ops && clk->ops->find_idlest)
+ _omap2_module_wait_ready(clk);
+
+ return 0;
+
+err:
+ if (clkdm_control && clk->clkdm)
+ ti_clk_ll_ops->clkdm_clk_disable(clk->clkdm, hw->clk);
+ return ret;
+}
+
+/**
+ * omap2_dflt_clk_disable - disable a clock in the hardware
+ * @hw: struct clk_hw * of the clock to disable
+ *
+ * Disable the clock @hw in the hardware, and call into the OMAP
+ * clockdomain code to "disable" the corresponding clockdomain if all
+ * clocks/hwmods in that clockdomain are now disabled. No return
+ * value.
+ */
+void omap2_dflt_clk_disable(struct clk_hw *hw)
+{
+ struct clk_hw_omap *clk;
+ u32 v;
+
+ clk = to_clk_hw_omap(hw);
+ if (!clk->enable_reg) {
+ /*
+ * 'independent' here refers to a clock which is not
+ * controlled by its parent.
+ */
+ pr_err("%s: independent clock %s has no enable_reg\n",
+ __func__, __clk_get_name(hw->clk));
+ return;
+ }
+
+ v = ti_clk_ll_ops->clk_readl(clk->enable_reg);
+ if (clk->flags & INVERT_ENABLE)
+ v |= (1 << clk->enable_bit);
+ else
+ v &= ~(1 << clk->enable_bit);
+ ti_clk_ll_ops->clk_writel(v, clk->enable_reg);
+ /* No OCP barrier needed here since it is a disable operation */
+
+ if (!(ti_clk_get_features()->flags & TI_CLK_DISABLE_CLKDM_CONTROL) &&
+ clk->clkdm)
+ ti_clk_ll_ops->clkdm_clk_disable(clk->clkdm, hw->clk);
+}
+
+/**
+ * omap2_dflt_clk_is_enabled - is clock enabled in the hardware?
+ * @hw: struct clk_hw * to check
+ *
+ * Return 1 if the clock represented by @hw is enabled in the
+ * hardware, or 0 otherwise. Intended for use in the struct
+ * clk_ops.is_enabled function pointer.
+ */
+int omap2_dflt_clk_is_enabled(struct clk_hw *hw)
+{
+ struct clk_hw_omap *clk = to_clk_hw_omap(hw);
+ u32 v;
+
+ v = ti_clk_ll_ops->clk_readl(clk->enable_reg);
+
+ if (clk->flags & INVERT_ENABLE)
+ v ^= BIT(clk->enable_bit);
+
+ v &= BIT(clk->enable_bit);
+
+ return v ? 1 : 0;
+}
+
+const struct clk_hw_omap_ops clkhwops_wait = {
+ .find_idlest = omap2_clk_dflt_find_idlest,
+ .find_companion = omap2_clk_dflt_find_companion,
+};
diff --git a/drivers/clk/ti/clock.h b/drivers/clk/ti/clock.h
index 688d9e4..f215383 100644
--- a/drivers/clk/ti/clock.h
+++ b/drivers/clk/ti/clock.h
@@ -175,9 +175,14 @@ void omap2_clk_enable_init_clocks(const char **clk_names, u8 num_clocks);
extern const struct clk_hw_omap_ops clkhwops_omap3_dpll;
extern const struct clk_hw_omap_ops clkhwops_omap4_dpllmx;
+extern const struct clk_hw_omap_ops clkhwops_wait;
extern const struct clk_hw_omap_ops clkhwops_iclk;
extern const struct clk_hw_omap_ops clkhwops_iclk_wait;
+int omap2_dflt_clk_enable(struct clk_hw *hw);
+void omap2_dflt_clk_disable(struct clk_hw *hw);
+int omap2_dflt_clk_is_enabled(struct clk_hw *hw);
+
u8 omap2_init_dpll_parent(struct clk_hw *hw);
int omap3_noncore_dpll_enable(struct clk_hw *hw);
void omap3_noncore_dpll_disable(struct clk_hw *hw);
diff --git a/include/linux/clk/ti.h b/include/linux/clk/ti.h
index 3dadb74..891fe0f 100644
--- a/include/linux/clk/ti.h
+++ b/include/linux/clk/ti.h
@@ -278,9 +278,6 @@ int omap2_clk_disable_autoidle_all(void);
int omap2_clk_enable_autoidle_all(void);
int omap2_clk_allow_idle(struct clk *clk);
int omap2_clk_deny_idle(struct clk *clk);
-int omap2_dflt_clk_enable(struct clk_hw *hw);
-void omap2_dflt_clk_disable(struct clk_hw *hw);
-int omap2_dflt_clk_is_enabled(struct clk_hw *hw);
void omap2_clkt_iclk_allow_idle(struct clk_hw_omap *clk);
void omap2_clkt_iclk_deny_idle(struct clk_hw_omap *clk);
void omap2_clk_dflt_find_companion(struct clk_hw_omap *clk,
@@ -337,7 +334,6 @@ struct ti_clk_features *ti_clk_get_features(void);
extern const struct clk_hw_omap_ops clkhwops_omap2xxx_dpll;
extern const struct clk_hw_omap_ops clkhwops_omap2430_i2chs_wait;
-extern const struct clk_hw_omap_ops clkhwops_wait;
extern const struct clk_hw_omap_ops clkhwops_omap3430es2_dss_usbhost_wait;
extern const struct clk_hw_omap_ops clkhwops_am35xx_ipss_module_wait;
extern const struct clk_hw_omap_ops clkhwops_am35xx_ipss_wait;
--
1.7.9.5
^ permalink raw reply related [flat|nested] 120+ messages in thread
* [PATCHv2 17/27] clk: ti: dflt: move support for default gate clock to clock driver
@ 2015-05-11 8:54 ` Tero Kristo
0 siblings, 0 replies; 120+ messages in thread
From: Tero Kristo @ 2015-05-11 8:54 UTC (permalink / raw)
To: linux-arm-kernel
With the legacy support gone, OMAP2+ default gate clock can be moved
under clock driver. Create a new file for the purpose, and clean-up
the header exports a bit as some clock APIs are no longer needed
outside clock driver itself.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
---
arch/arm/mach-omap2/clock.c | 273 -------------------------------------
drivers/clk/ti/Makefile | 3 +-
drivers/clk/ti/clkt_dflt.c | 316 +++++++++++++++++++++++++++++++++++++++++++
drivers/clk/ti/clock.h | 5 +
include/linux/clk/ti.h | 4 -
5 files changed, 323 insertions(+), 278 deletions(-)
create mode 100644 drivers/clk/ti/clkt_dflt.c
diff --git a/arch/arm/mach-omap2/clock.c b/arch/arm/mach-omap2/clock.c
index 6c17adf..38a336b 100644
--- a/arch/arm/mach-omap2/clock.c
+++ b/arch/arm/mach-omap2/clock.c
@@ -40,12 +40,6 @@
#include "cm-regbits-34xx.h"
#include "common.h"
-/*
- * MAX_MODULE_ENABLE_WAIT: maximum of number of microseconds to wait
- * for a module to indicate that it is no longer in idle
- */
-#define MAX_MODULE_ENABLE_WAIT 100000
-
u16 cpu_mask;
/* DPLL valid Fint frequency band limits - from 34xx TRM Section 4.7.6.2 */
@@ -176,77 +170,6 @@ void __init omap2_clk_legacy_provider_init(int index, void __iomem *mem)
/* Private functions */
-
-/**
- * _wait_idlest_generic - wait for a module to leave the idle state
- * @clk: module clock to wait for (needed for register offsets)
- * @reg: virtual address of module IDLEST register
- * @mask: value to mask against to determine if the module is active
- * @idlest: idle state indicator (0 or 1) for the clock
- * @name: name of the clock (for printk)
- *
- * Wait for a module to leave idle, where its idle-status register is
- * not inside the CM module. Returns 1 if the module left idle
- * promptly, or 0 if the module did not leave idle before the timeout
- * elapsed. XXX Deprecated - should be moved into drivers for the
- * individual IP block that the IDLEST register exists in.
- */
-static int _wait_idlest_generic(struct clk_hw_omap *clk, void __iomem *reg,
- u32 mask, u8 idlest, const char *name)
-{
- int i = 0, ena = 0;
-
- ena = (idlest) ? 0 : mask;
-
- omap_test_timeout(((omap2_clk_readl(clk, reg) & mask) == ena),
- MAX_MODULE_ENABLE_WAIT, i);
-
- if (i < MAX_MODULE_ENABLE_WAIT)
- pr_debug("omap clock: module associated with clock %s ready after %d loops\n",
- name, i);
- else
- pr_err("omap clock: module associated with clock %s didn't enable in %d tries\n",
- name, MAX_MODULE_ENABLE_WAIT);
-
- return (i < MAX_MODULE_ENABLE_WAIT) ? 1 : 0;
-};
-
-/**
- * _omap2_module_wait_ready - wait for an OMAP module to leave IDLE
- * @clk: struct clk * belonging to the module
- *
- * If the necessary clocks for the OMAP hardware IP block that
- * corresponds to clock @clk are enabled, then wait for the module to
- * indicate readiness (i.e., to leave IDLE). This code does not
- * belong in the clock code and will be moved in the medium term to
- * module-dependent code. No return value.
- */
-static void _omap2_module_wait_ready(struct clk_hw_omap *clk)
-{
- void __iomem *companion_reg, *idlest_reg;
- u8 other_bit, idlest_bit, idlest_val, idlest_reg_id;
- s16 prcm_mod;
- int r;
-
- /* Not all modules have multiple clocks that their IDLEST depends on */
- if (clk->ops->find_companion) {
- clk->ops->find_companion(clk, &companion_reg, &other_bit);
- if (!(omap2_clk_readl(clk, companion_reg) & (1 << other_bit)))
- return;
- }
-
- clk->ops->find_idlest(clk, &idlest_reg, &idlest_bit, &idlest_val);
- r = cm_split_idlest_reg(idlest_reg, &prcm_mod, &idlest_reg_id);
- if (r) {
- /* IDLEST register not in the CM module */
- _wait_idlest_generic(clk, idlest_reg, (1 << idlest_bit),
- idlest_val, __clk_get_name(clk->hw.clk));
- } else {
- omap_cm_wait_module_ready(0, prcm_mod, idlest_reg_id,
- idlest_bit);
- };
-}
-
/* Public functions */
/**
@@ -280,174 +203,6 @@ void omap2_init_clk_clkdm(struct clk_hw *hw)
}
/**
- * omap2_clk_dflt_find_companion - find companion clock to @clk
- * @clk: struct clk * to find the companion clock of
- * @other_reg: void __iomem ** to return the companion clock CM_*CLKEN va in
- * @other_bit: u8 ** to return the companion clock bit shift in
- *
- * Note: We don't need special code here for INVERT_ENABLE for the
- * time being since INVERT_ENABLE only applies to clocks enabled by
- * CM_CLKEN_PLL
- *
- * Convert CM_ICLKEN* <-> CM_FCLKEN*. This conversion assumes it's
- * just a matter of XORing the bits.
- *
- * Some clocks don't have companion clocks. For example, modules with
- * only an interface clock (such as MAILBOXES) don't have a companion
- * clock. Right now, this code relies on the hardware exporting a bit
- * in the correct companion register that indicates that the
- * nonexistent 'companion clock' is active. Future patches will
- * associate this type of code with per-module data structures to
- * avoid this issue, and remove the casts. No return value.
- */
-void omap2_clk_dflt_find_companion(struct clk_hw_omap *clk,
- void __iomem **other_reg, u8 *other_bit)
-{
- u32 r;
-
- /*
- * Convert CM_ICLKEN* <-> CM_FCLKEN*. This conversion assumes
- * it's just a matter of XORing the bits.
- */
- r = ((__force u32)clk->enable_reg ^ (CM_FCLKEN ^ CM_ICLKEN));
-
- *other_reg = (__force void __iomem *)r;
- *other_bit = clk->enable_bit;
-}
-
-/**
- * omap2_clk_dflt_find_idlest - find CM_IDLEST reg va, bit shift for @clk
- * @clk: struct clk * to find IDLEST info for
- * @idlest_reg: void __iomem ** to return the CM_IDLEST va in
- * @idlest_bit: u8 * to return the CM_IDLEST bit shift in
- * @idlest_val: u8 * to return the idle status indicator
- *
- * Return the CM_IDLEST register address and bit shift corresponding
- * to the module that "owns" this clock. This default code assumes
- * that the CM_IDLEST bit shift is the CM_*CLKEN bit shift, and that
- * the IDLEST register address ID corresponds to the CM_*CLKEN
- * register address ID (e.g., that CM_FCLKEN2 corresponds to
- * CM_IDLEST2). This is not true for all modules. No return value.
- */
-void omap2_clk_dflt_find_idlest(struct clk_hw_omap *clk,
- void __iomem **idlest_reg, u8 *idlest_bit, u8 *idlest_val)
-{
- u32 r;
-
- r = (((__force u32)clk->enable_reg & ~0xf0) | 0x20);
- *idlest_reg = (__force void __iomem *)r;
- *idlest_bit = clk->enable_bit;
-
- /*
- * 24xx uses 0 to indicate not ready, and 1 to indicate ready.
- * 34xx reverses this, just to keep us on our toes
- * AM35xx uses both, depending on the module.
- */
- *idlest_val = ti_clk_get_features()->cm_idlest_val;
-}
-
-/**
- * omap2_dflt_clk_enable - enable a clock in the hardware
- * @hw: struct clk_hw * of the clock to enable
- *
- * Enable the clock @hw in the hardware. We first call into the OMAP
- * clockdomain code to "enable" the corresponding clockdomain if this
- * is the first enabled user of the clockdomain. Then program the
- * hardware to enable the clock. Then wait for the IP block that uses
- * this clock to leave idle (if applicable). Returns the error value
- * from clkdm_clk_enable() if it terminated with an error, or -EINVAL
- * if @hw has a null clock enable_reg, or zero upon success.
- */
-int omap2_dflt_clk_enable(struct clk_hw *hw)
-{
- struct clk_hw_omap *clk;
- u32 v;
- int ret = 0;
- bool clkdm_control;
-
- if (ti_clk_get_features()->flags & TI_CLK_DISABLE_CLKDM_CONTROL)
- clkdm_control = false;
- else
- clkdm_control = true;
-
- clk = to_clk_hw_omap(hw);
-
- if (clkdm_control && clk->clkdm) {
- ret = clkdm_clk_enable(clk->clkdm, hw->clk);
- if (ret) {
- WARN(1, "%s: could not enable %s's clockdomain %s: %d\n",
- __func__, __clk_get_name(hw->clk),
- clk->clkdm->name, ret);
- return ret;
- }
- }
-
- if (unlikely(clk->enable_reg == NULL)) {
- pr_err("%s: %s missing enable_reg\n", __func__,
- __clk_get_name(hw->clk));
- ret = -EINVAL;
- goto err;
- }
-
- /* FIXME should not have INVERT_ENABLE bit here */
- v = omap2_clk_readl(clk, clk->enable_reg);
- if (clk->flags & INVERT_ENABLE)
- v &= ~(1 << clk->enable_bit);
- else
- v |= (1 << clk->enable_bit);
- omap2_clk_writel(v, clk, clk->enable_reg);
- v = omap2_clk_readl(clk, clk->enable_reg); /* OCP barrier */
-
- if (clk->ops && clk->ops->find_idlest)
- _omap2_module_wait_ready(clk);
-
- return 0;
-
-err:
- if (clkdm_control && clk->clkdm)
- clkdm_clk_disable(clk->clkdm, hw->clk);
- return ret;
-}
-
-/**
- * omap2_dflt_clk_disable - disable a clock in the hardware
- * @hw: struct clk_hw * of the clock to disable
- *
- * Disable the clock @hw in the hardware, and call into the OMAP
- * clockdomain code to "disable" the corresponding clockdomain if all
- * clocks/hwmods in that clockdomain are now disabled. No return
- * value.
- */
-void omap2_dflt_clk_disable(struct clk_hw *hw)
-{
- struct clk_hw_omap *clk;
- u32 v;
-
- clk = to_clk_hw_omap(hw);
- if (!clk->enable_reg) {
- /*
- * 'independent' here refers to a clock which is not
- * controlled by its parent.
- */
- pr_err("%s: independent clock %s has no enable_reg\n",
- __func__, __clk_get_name(hw->clk));
- return;
- }
-
- v = omap2_clk_readl(clk, clk->enable_reg);
- if (clk->flags & INVERT_ENABLE)
- v |= (1 << clk->enable_bit);
- else
- v &= ~(1 << clk->enable_bit);
- omap2_clk_writel(v, clk, clk->enable_reg);
- /* No OCP barrier needed here since it is a disable operation */
-
- if (!(ti_clk_get_features()->flags & TI_CLK_DISABLE_CLKDM_CONTROL) &&
- clk->clkdm)
- clkdm_clk_disable(clk->clkdm, hw->clk);
-}
-
-/**
* omap2_clkops_enable_clkdm - increment usecount on clkdm of @hw
* @hw: struct clk_hw * of the clock being enabled
*
@@ -523,29 +278,6 @@ void omap2_clkops_disable_clkdm(struct clk_hw *hw)
clkdm_clk_disable(clk->clkdm, hw->clk);
}
-/**
- * omap2_dflt_clk_is_enabled - is clock enabled in the hardware?
- * @hw: struct clk_hw * to check
- *
- * Return 1 if the clock represented by @hw is enabled in the
- * hardware, or 0 otherwise. Intended for use in the struct
- * clk_ops.is_enabled function pointer.
- */
-int omap2_dflt_clk_is_enabled(struct clk_hw *hw)
-{
- struct clk_hw_omap *clk = to_clk_hw_omap(hw);
- u32 v;
-
- v = omap2_clk_readl(clk, clk->enable_reg);
-
- if (clk->flags & INVERT_ENABLE)
- v ^= BIT(clk->enable_bit);
-
- v &= BIT(clk->enable_bit);
-
- return v ? 1 : 0;
-}
-
static int __initdata mpurate;
/*
@@ -566,11 +298,6 @@ static int __init omap_clk_setup(char *str)
}
__setup("mpurate=", omap_clk_setup);
-const struct clk_hw_omap_ops clkhwops_wait = {
- .find_idlest = omap2_clk_dflt_find_idlest,
- .find_companion = omap2_clk_dflt_find_companion,
-};
-
/**
* omap2_clk_print_new_rates - print summary of current clock tree rates
* @hfclkin_ck_name: clk name for the off-chip HF oscillator
diff --git a/drivers/clk/ti/Makefile b/drivers/clk/ti/Makefile
index fe2cfa2..fc6fe8c 100644
--- a/drivers/clk/ti/Makefile
+++ b/drivers/clk/ti/Makefile
@@ -1,7 +1,8 @@
obj-y += clk.o autoidle.o clockdomain.o
clk-common = dpll.o composite.o divider.o gate.o \
fixed-factor.o mux.o apll.o \
- clkt_dpll.o clkt_iclk.o dpll3xxx.o
+ clkt_dpll.o clkt_iclk.o dpll3xxx.o \
+ clkt_dflt.o
obj-$(CONFIG_SOC_AM33XX) += $(clk-common) clk-33xx.o
obj-$(CONFIG_SOC_TI81XX) += $(clk-common) fapll.o clk-816x.o
obj-$(CONFIG_ARCH_OMAP2) += $(clk-common) interface.o clk-2xxx.o
diff --git a/drivers/clk/ti/clkt_dflt.c b/drivers/clk/ti/clkt_dflt.c
new file mode 100644
index 0000000..a176b8a
--- /dev/null
+++ b/drivers/clk/ti/clkt_dflt.c
@@ -0,0 +1,316 @@
+/*
+ * Default clock type
+ *
+ * Copyright (C) 2005-2008, 2015 Texas Instruments, Inc.
+ * Copyright (C) 2004-2010 Nokia Corporation
+ *
+ * Contacts:
+ * Richard Woodruff <r-woodruff2@ti.com>
+ * Paul Walmsley
+ * Tero Kristo <t-kristo@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/clk-provider.h>
+#include <linux/io.h>
+#include <linux/clk/ti.h>
+#include <linux/delay.h>
+
+#include "clock.h"
+
+/*
+ * MAX_MODULE_ENABLE_WAIT: maximum of number of microseconds to wait
+ * for a module to indicate that it is no longer in idle
+ */
+#define MAX_MODULE_ENABLE_WAIT 100000
+
+/*
+ * CM module register offsets, used for calculating the companion
+ * register addresses.
+ */
+#define CM_FCLKEN 0x0000
+#define CM_ICLKEN 0x0010
+
+/**
+ * _wait_idlest_generic - wait for a module to leave the idle state
+ * @clk: module clock to wait for (needed for register offsets)
+ * @reg: virtual address of module IDLEST register
+ * @mask: value to mask against to determine if the module is active
+ * @idlest: idle state indicator (0 or 1) for the clock
+ * @name: name of the clock (for printk)
+ *
+ * Wait for a module to leave idle, where its idle-status register is
+ * not inside the CM module. Returns 1 if the module left idle
+ * promptly, or 0 if the module did not leave idle before the timeout
+ * elapsed. XXX Deprecated - should be moved into drivers for the
+ * individual IP block that the IDLEST register exists in.
+ */
+static int _wait_idlest_generic(struct clk_hw_omap *clk, void __iomem *reg,
+ u32 mask, u8 idlest, const char *name)
+{
+ int i = 0, ena = 0;
+
+ ena = (idlest) ? 0 : mask;
+
+ /* Wait until module enters enabled state */
+ for (i = 0; i < MAX_MODULE_ENABLE_WAIT; i++) {
+ if ((ti_clk_ll_ops->clk_readl(reg) & mask) == ena)
+ break;
+ udelay(1);
+ }
+
+ if (i < MAX_MODULE_ENABLE_WAIT)
+ pr_debug("omap clock: module associated with clock %s ready after %d loops\n",
+ name, i);
+ else
+ pr_err("omap clock: module associated with clock %s didn't enable in %d tries\n",
+ name, MAX_MODULE_ENABLE_WAIT);
+
+ return (i < MAX_MODULE_ENABLE_WAIT) ? 1 : 0;
+}
+
+/**
+ * _omap2_module_wait_ready - wait for an OMAP module to leave IDLE
+ * @clk: struct clk * belonging to the module
+ *
+ * If the necessary clocks for the OMAP hardware IP block that
+ * corresponds to clock @clk are enabled, then wait for the module to
+ * indicate readiness (i.e., to leave IDLE). This code does not
+ * belong in the clock code and will be moved in the medium term to
+ * module-dependent code. No return value.
+ */
+static void _omap2_module_wait_ready(struct clk_hw_omap *clk)
+{
+ void __iomem *companion_reg, *idlest_reg;
+ u8 other_bit, idlest_bit, idlest_val, idlest_reg_id;
+ s16 prcm_mod;
+ int r;
+
+ /* Not all modules have multiple clocks that their IDLEST depends on */
+ if (clk->ops->find_companion) {
+ clk->ops->find_companion(clk, &companion_reg, &other_bit);
+ if (!(ti_clk_ll_ops->clk_readl(companion_reg) &
+ (1 << other_bit)))
+ return;
+ }
+
+ clk->ops->find_idlest(clk, &idlest_reg, &idlest_bit, &idlest_val);
+ r = ti_clk_ll_ops->cm_split_idlest_reg(idlest_reg, &prcm_mod,
+ &idlest_reg_id);
+ if (r) {
+ /* IDLEST register not in the CM module */
+ _wait_idlest_generic(clk, idlest_reg, (1 << idlest_bit),
+ idlest_val, __clk_get_name(clk->hw.clk));
+ } else {
+ ti_clk_ll_ops->cm_wait_module_ready(0, prcm_mod, idlest_reg_id,
+ idlest_bit);
+ }
+}
+
+/**
+ * omap2_clk_dflt_find_companion - find companion clock to @clk
+ * @clk: struct clk * to find the companion clock of
+ * @other_reg: void __iomem ** to return the companion clock CM_*CLKEN va in
+ * @other_bit: u8 ** to return the companion clock bit shift in
+ *
+ * Note: We don't need special code here for INVERT_ENABLE for the
+ * time being since INVERT_ENABLE only applies to clocks enabled by
+ * CM_CLKEN_PLL
+ *
+ * Convert CM_ICLKEN* <-> CM_FCLKEN*. This conversion assumes it's
+ * just a matter of XORing the bits.
+ *
+ * Some clocks don't have companion clocks. For example, modules with
+ * only an interface clock (such as MAILBOXES) don't have a companion
+ * clock. Right now, this code relies on the hardware exporting a bit
+ * in the correct companion register that indicates that the
+ * nonexistent 'companion clock' is active. Future patches will
+ * associate this type of code with per-module data structures to
+ * avoid this issue, and remove the casts. No return value.
+ */
+void omap2_clk_dflt_find_companion(struct clk_hw_omap *clk,
+ void __iomem **other_reg, u8 *other_bit)
+{
+ u32 r;
+
+ /*
+ * Convert CM_ICLKEN* <-> CM_FCLKEN*. This conversion assumes
+ * it's just a matter of XORing the bits.
+ */
+ r = ((__force u32)clk->enable_reg ^ (CM_FCLKEN ^ CM_ICLKEN));
+
+ *other_reg = (__force void __iomem *)r;
+ *other_bit = clk->enable_bit;
+}
+
+/**
+ * omap2_clk_dflt_find_idlest - find CM_IDLEST reg va, bit shift for @clk
+ * @clk: struct clk * to find IDLEST info for
+ * @idlest_reg: void __iomem ** to return the CM_IDLEST va in
+ * @idlest_bit: u8 * to return the CM_IDLEST bit shift in
+ * @idlest_val: u8 * to return the idle status indicator
+ *
+ * Return the CM_IDLEST register address and bit shift corresponding
+ * to the module that "owns" this clock. This default code assumes
+ * that the CM_IDLEST bit shift is the CM_*CLKEN bit shift, and that
+ * the IDLEST register address ID corresponds to the CM_*CLKEN
+ * register address ID (e.g., that CM_FCLKEN2 corresponds to
+ * CM_IDLEST2). This is not true for all modules. No return value.
+ */
+void omap2_clk_dflt_find_idlest(struct clk_hw_omap *clk,
+ void __iomem **idlest_reg, u8 *idlest_bit,
+ u8 *idlest_val)
+{
+ u32 r;
+
+ r = (((__force u32)clk->enable_reg & ~0xf0) | 0x20);
+ *idlest_reg = (__force void __iomem *)r;
+ *idlest_bit = clk->enable_bit;
+
+ /*
+ * 24xx uses 0 to indicate not ready, and 1 to indicate ready.
+ * 34xx reverses this, just to keep us on our toes
+ * AM35xx uses both, depending on the module.
+ */
+ *idlest_val = ti_clk_get_features()->cm_idlest_val;
+}
+
+/**
+ * omap2_dflt_clk_enable - enable a clock in the hardware
+ * @hw: struct clk_hw * of the clock to enable
+ *
+ * Enable the clock @hw in the hardware. We first call into the OMAP
+ * clockdomain code to "enable" the corresponding clockdomain if this
+ * is the first enabled user of the clockdomain. Then program the
+ * hardware to enable the clock. Then wait for the IP block that uses
+ * this clock to leave idle (if applicable). Returns the error value
+ * from clkdm_clk_enable() if it terminated with an error, or -EINVAL
+ * if @hw has a null clock enable_reg, or zero upon success.
+ */
+int omap2_dflt_clk_enable(struct clk_hw *hw)
+{
+ struct clk_hw_omap *clk;
+ u32 v;
+ int ret = 0;
+ bool clkdm_control;
+
+ if (ti_clk_get_features()->flags & TI_CLK_DISABLE_CLKDM_CONTROL)
+ clkdm_control = false;
+ else
+ clkdm_control = true;
+
+ clk = to_clk_hw_omap(hw);
+
+ if (clkdm_control && clk->clkdm) {
+ ret = ti_clk_ll_ops->clkdm_clk_enable(clk->clkdm, hw->clk);
+ if (ret) {
+ WARN(1,
+ "%s: could not enable %s's clockdomain %s: %d\n",
+ __func__, __clk_get_name(hw->clk),
+ clk->clkdm_name, ret);
+ return ret;
+ }
+ }
+
+ if (unlikely(!clk->enable_reg)) {
+ pr_err("%s: %s missing enable_reg\n", __func__,
+ __clk_get_name(hw->clk));
+ ret = -EINVAL;
+ goto err;
+ }
+
+ /* FIXME should not have INVERT_ENABLE bit here */
+ v = ti_clk_ll_ops->clk_readl(clk->enable_reg);
+ if (clk->flags & INVERT_ENABLE)
+ v &= ~(1 << clk->enable_bit);
+ else
+ v |= (1 << clk->enable_bit);
+ ti_clk_ll_ops->clk_writel(v, clk->enable_reg);
+ v = ti_clk_ll_ops->clk_readl(clk->enable_reg); /* OCP barrier */
+
+ if (clk->ops && clk->ops->find_idlest)
+ _omap2_module_wait_ready(clk);
+
+ return 0;
+
+err:
+ if (clkdm_control && clk->clkdm)
+ ti_clk_ll_ops->clkdm_clk_disable(clk->clkdm, hw->clk);
+ return ret;
+}
+
+/**
+ * omap2_dflt_clk_disable - disable a clock in the hardware
+ * @hw: struct clk_hw * of the clock to disable
+ *
+ * Disable the clock @hw in the hardware, and call into the OMAP
+ * clockdomain code to "disable" the corresponding clockdomain if all
+ * clocks/hwmods in that clockdomain are now disabled. No return
+ * value.
+ */
+void omap2_dflt_clk_disable(struct clk_hw *hw)
+{
+ struct clk_hw_omap *clk;
+ u32 v;
+
+ clk = to_clk_hw_omap(hw);
+ if (!clk->enable_reg) {
+ /*
+ * 'independent' here refers to a clock which is not
+ * controlled by its parent.
+ */
+ pr_err("%s: independent clock %s has no enable_reg\n",
+ __func__, __clk_get_name(hw->clk));
+ return;
+ }
+
+ v = ti_clk_ll_ops->clk_readl(clk->enable_reg);
+ if (clk->flags & INVERT_ENABLE)
+ v |= (1 << clk->enable_bit);
+ else
+ v &= ~(1 << clk->enable_bit);
+ ti_clk_ll_ops->clk_writel(v, clk->enable_reg);
+ /* No OCP barrier needed here since it is a disable operation */
+
+ if (!(ti_clk_get_features()->flags & TI_CLK_DISABLE_CLKDM_CONTROL) &&
+ clk->clkdm)
+ ti_clk_ll_ops->clkdm_clk_disable(clk->clkdm, hw->clk);
+}
+
+/**
+ * omap2_dflt_clk_is_enabled - is clock enabled in the hardware?
+ * @hw: struct clk_hw * to check
+ *
+ * Return 1 if the clock represented by @hw is enabled in the
+ * hardware, or 0 otherwise. Intended for use in the struct
+ * clk_ops.is_enabled function pointer.
+ */
+int omap2_dflt_clk_is_enabled(struct clk_hw *hw)
+{
+ struct clk_hw_omap *clk = to_clk_hw_omap(hw);
+ u32 v;
+
+ v = ti_clk_ll_ops->clk_readl(clk->enable_reg);
+
+ if (clk->flags & INVERT_ENABLE)
+ v ^= BIT(clk->enable_bit);
+
+ v &= BIT(clk->enable_bit);
+
+ return v ? 1 : 0;
+}
+
+const struct clk_hw_omap_ops clkhwops_wait = {
+ .find_idlest = omap2_clk_dflt_find_idlest,
+ .find_companion = omap2_clk_dflt_find_companion,
+};
diff --git a/drivers/clk/ti/clock.h b/drivers/clk/ti/clock.h
index 688d9e4..f215383 100644
--- a/drivers/clk/ti/clock.h
+++ b/drivers/clk/ti/clock.h
@@ -175,9 +175,14 @@ void omap2_clk_enable_init_clocks(const char **clk_names, u8 num_clocks);
extern const struct clk_hw_omap_ops clkhwops_omap3_dpll;
extern const struct clk_hw_omap_ops clkhwops_omap4_dpllmx;
+extern const struct clk_hw_omap_ops clkhwops_wait;
extern const struct clk_hw_omap_ops clkhwops_iclk;
extern const struct clk_hw_omap_ops clkhwops_iclk_wait;
+int omap2_dflt_clk_enable(struct clk_hw *hw);
+void omap2_dflt_clk_disable(struct clk_hw *hw);
+int omap2_dflt_clk_is_enabled(struct clk_hw *hw);
+
u8 omap2_init_dpll_parent(struct clk_hw *hw);
int omap3_noncore_dpll_enable(struct clk_hw *hw);
void omap3_noncore_dpll_disable(struct clk_hw *hw);
diff --git a/include/linux/clk/ti.h b/include/linux/clk/ti.h
index 3dadb74..891fe0f 100644
--- a/include/linux/clk/ti.h
+++ b/include/linux/clk/ti.h
@@ -278,9 +278,6 @@ int omap2_clk_disable_autoidle_all(void);
int omap2_clk_enable_autoidle_all(void);
int omap2_clk_allow_idle(struct clk *clk);
int omap2_clk_deny_idle(struct clk *clk);
-int omap2_dflt_clk_enable(struct clk_hw *hw);
-void omap2_dflt_clk_disable(struct clk_hw *hw);
-int omap2_dflt_clk_is_enabled(struct clk_hw *hw);
void omap2_clkt_iclk_allow_idle(struct clk_hw_omap *clk);
void omap2_clkt_iclk_deny_idle(struct clk_hw_omap *clk);
void omap2_clk_dflt_find_companion(struct clk_hw_omap *clk,
@@ -337,7 +334,6 @@ struct ti_clk_features *ti_clk_get_features(void);
extern const struct clk_hw_omap_ops clkhwops_omap2xxx_dpll;
extern const struct clk_hw_omap_ops clkhwops_omap2430_i2chs_wait;
-extern const struct clk_hw_omap_ops clkhwops_wait;
extern const struct clk_hw_omap_ops clkhwops_omap3430es2_dss_usbhost_wait;
extern const struct clk_hw_omap_ops clkhwops_am35xx_ipss_module_wait;
extern const struct clk_hw_omap_ops clkhwops_am35xx_ipss_wait;
--
1.7.9.5
^ permalink raw reply related [flat|nested] 120+ messages in thread
* [PATCHv2 18/27] clk: ti: omap2430: move clock support code under clock driver
2015-05-11 8:54 ` Tero Kristo
(?)
@ 2015-05-11 8:54 ` Tero Kristo
-1 siblings, 0 replies; 120+ messages in thread
From: Tero Kristo @ 2015-05-11 8:54 UTC (permalink / raw)
To: mturquette, tony, linux-omap, linux-clk, sboyd, paul; +Cc: linux-arm-kernel
With the legacy clock support gone, this is no longer needed under
platform code-base. Thus, move this under the TI clock driver, and
remove the exported API from the public header.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
---
arch/arm/mach-omap2/Makefile | 1 -
arch/arm/mach-omap2/clock2430.c | 57 ---------------------------------------
drivers/clk/ti/clkt_iclk.c | 35 ++++++++++++++++++++++++
drivers/clk/ti/clock.h | 1 +
include/linux/clk/ti.h | 1 -
5 files changed, 36 insertions(+), 59 deletions(-)
delete mode 100644 arch/arm/mach-omap2/clock2430.c
diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
index 07052656..695d58f 100644
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -185,7 +185,6 @@ obj-$(CONFIG_ARCH_OMAP2) += $(clock-common)
obj-$(CONFIG_ARCH_OMAP2) += clkt2xxx_dpllcore.o
obj-$(CONFIG_ARCH_OMAP2) += clkt2xxx_virt_prcm_set.o
obj-$(CONFIG_ARCH_OMAP2) += clkt2xxx_dpll.o
-obj-$(CONFIG_SOC_OMAP2430) += clock2430.o
obj-$(CONFIG_ARCH_OMAP3) += $(clock-common)
obj-$(CONFIG_ARCH_OMAP3) += clock34xx.o clkt34xx_dpll3m2.o
obj-$(CONFIG_ARCH_OMAP3) += clock3517.o
diff --git a/arch/arm/mach-omap2/clock2430.c b/arch/arm/mach-omap2/clock2430.c
deleted file mode 100644
index cef0c8d..0000000
--- a/arch/arm/mach-omap2/clock2430.c
+++ /dev/null
@@ -1,57 +0,0 @@
-/*
- * clock2430.c - OMAP2430-specific clock integration code
- *
- * Copyright (C) 2005-2008 Texas Instruments, Inc.
- * Copyright (C) 2004-2010 Nokia Corporation
- *
- * Contacts:
- * Richard Woodruff <r-woodruff2@ti.com>
- * Paul Walmsley
- *
- * Based on earlier work by Tuukka Tikkanen, Tony Lindgren,
- * Gordon McNutt and RidgeRun, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#undef DEBUG
-
-#include <linux/kernel.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-
-#include "soc.h"
-#include "iomap.h"
-#include "clock.h"
-#include "clock2xxx.h"
-#include "cm2xxx.h"
-#include "cm-regbits-24xx.h"
-
-/**
- * omap2430_clk_i2chs_find_idlest - return CM_IDLEST info for 2430 I2CHS
- * @clk: struct clk * being enabled
- * @idlest_reg: void __iomem ** to store CM_IDLEST reg address into
- * @idlest_bit: pointer to a u8 to store the CM_IDLEST bit shift into
- * @idlest_val: pointer to a u8 to store the CM_IDLEST indicator
- *
- * OMAP2430 I2CHS CM_IDLEST bits are in CM_IDLEST1_CORE, but the
- * CM_*CLKEN bits are in CM_{I,F}CLKEN2_CORE. This custom function
- * passes back the correct CM_IDLEST register address for I2CHS
- * modules. No return value.
- */
-static void omap2430_clk_i2chs_find_idlest(struct clk_hw_omap *clk,
- void __iomem **idlest_reg,
- u8 *idlest_bit,
- u8 *idlest_val)
-{
- *idlest_reg = OMAP2430_CM_REGADDR(CORE_MOD, CM_IDLEST);
- *idlest_bit = clk->enable_bit;
- *idlest_val = OMAP24XX_CM_IDLEST_VAL;
-}
-
-/* 2430 I2CHS has non-standard IDLEST register */
-const struct clk_hw_omap_ops clkhwops_omap2430_i2chs_wait = {
- .find_idlest = omap2430_clk_i2chs_find_idlest,
- .find_companion = omap2_clk_dflt_find_companion,
-};
diff --git a/drivers/clk/ti/clkt_iclk.c b/drivers/clk/ti/clkt_iclk.c
index a03919d..38c3690 100644
--- a/drivers/clk/ti/clkt_iclk.c
+++ b/drivers/clk/ti/clkt_iclk.c
@@ -18,8 +18,12 @@
#include "clock.h"
/* Register offsets */
+#define OMAP24XX_CM_FCLKEN2 0x04
#define CM_AUTOIDLE 0x30
#define CM_ICLKEN 0x10
+#define CM_IDLEST 0x20
+
+#define OMAP24XX_CM_IDLEST_VAL 0
/* Private functions */
@@ -51,6 +55,31 @@ void omap2_clkt_iclk_deny_idle(struct clk_hw_omap *clk)
ti_clk_ll_ops->clk_writel(v, r);
}
+/**
+ * omap2430_clk_i2chs_find_idlest - return CM_IDLEST info for 2430 I2CHS
+ * @clk: struct clk * being enabled
+ * @idlest_reg: void __iomem ** to store CM_IDLEST reg address into
+ * @idlest_bit: pointer to a u8 to store the CM_IDLEST bit shift into
+ * @idlest_val: pointer to a u8 to store the CM_IDLEST indicator
+ *
+ * OMAP2430 I2CHS CM_IDLEST bits are in CM_IDLEST1_CORE, but the
+ * CM_*CLKEN bits are in CM_{I,F}CLKEN2_CORE. This custom function
+ * passes back the correct CM_IDLEST register address for I2CHS
+ * modules. No return value.
+ */
+static void omap2430_clk_i2chs_find_idlest(struct clk_hw_omap *clk,
+ void __iomem **idlest_reg,
+ u8 *idlest_bit,
+ u8 *idlest_val)
+{
+ u32 r;
+
+ r = ((__force u32)clk->enable_reg ^ (OMAP24XX_CM_FCLKEN2 ^ CM_IDLEST));
+ *idlest_reg = (__force void __iomem *)r;
+ *idlest_bit = clk->enable_bit;
+ *idlest_val = OMAP24XX_CM_IDLEST_VAL;
+}
+
/* Public data */
const struct clk_hw_omap_ops clkhwops_iclk = {
@@ -64,3 +93,9 @@ const struct clk_hw_omap_ops clkhwops_iclk_wait = {
.find_idlest = omap2_clk_dflt_find_idlest,
.find_companion = omap2_clk_dflt_find_companion,
};
+
+/* 2430 I2CHS has non-standard IDLEST register */
+const struct clk_hw_omap_ops clkhwops_omap2430_i2chs_wait = {
+ .find_idlest = omap2430_clk_i2chs_find_idlest,
+ .find_companion = omap2_clk_dflt_find_companion,
+};
diff --git a/drivers/clk/ti/clock.h b/drivers/clk/ti/clock.h
index f215383..3652c26 100644
--- a/drivers/clk/ti/clock.h
+++ b/drivers/clk/ti/clock.h
@@ -178,6 +178,7 @@ extern const struct clk_hw_omap_ops clkhwops_omap4_dpllmx;
extern const struct clk_hw_omap_ops clkhwops_wait;
extern const struct clk_hw_omap_ops clkhwops_iclk;
extern const struct clk_hw_omap_ops clkhwops_iclk_wait;
+extern const struct clk_hw_omap_ops clkhwops_omap2430_i2chs_wait;
int omap2_dflt_clk_enable(struct clk_hw *hw);
void omap2_dflt_clk_disable(struct clk_hw *hw);
diff --git a/include/linux/clk/ti.h b/include/linux/clk/ti.h
index 891fe0f..a7728f7 100644
--- a/include/linux/clk/ti.h
+++ b/include/linux/clk/ti.h
@@ -333,7 +333,6 @@ void ti_clk_setup_features(struct ti_clk_features *features);
struct ti_clk_features *ti_clk_get_features(void);
extern const struct clk_hw_omap_ops clkhwops_omap2xxx_dpll;
-extern const struct clk_hw_omap_ops clkhwops_omap2430_i2chs_wait;
extern const struct clk_hw_omap_ops clkhwops_omap3430es2_dss_usbhost_wait;
extern const struct clk_hw_omap_ops clkhwops_am35xx_ipss_module_wait;
extern const struct clk_hw_omap_ops clkhwops_am35xx_ipss_wait;
--
1.7.9.5
^ permalink raw reply related [flat|nested] 120+ messages in thread
* [PATCHv2 18/27] clk: ti: omap2430: move clock support code under clock driver
@ 2015-05-11 8:54 ` Tero Kristo
0 siblings, 0 replies; 120+ messages in thread
From: Tero Kristo @ 2015-05-11 8:54 UTC (permalink / raw)
To: mturquette, tony, linux-omap, linux-clk, sboyd, paul; +Cc: linux-arm-kernel
With the legacy clock support gone, this is no longer needed under
platform code-base. Thus, move this under the TI clock driver, and
remove the exported API from the public header.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
---
arch/arm/mach-omap2/Makefile | 1 -
arch/arm/mach-omap2/clock2430.c | 57 ---------------------------------------
drivers/clk/ti/clkt_iclk.c | 35 ++++++++++++++++++++++++
drivers/clk/ti/clock.h | 1 +
include/linux/clk/ti.h | 1 -
5 files changed, 36 insertions(+), 59 deletions(-)
delete mode 100644 arch/arm/mach-omap2/clock2430.c
diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
index 07052656..695d58f 100644
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -185,7 +185,6 @@ obj-$(CONFIG_ARCH_OMAP2) += $(clock-common)
obj-$(CONFIG_ARCH_OMAP2) += clkt2xxx_dpllcore.o
obj-$(CONFIG_ARCH_OMAP2) += clkt2xxx_virt_prcm_set.o
obj-$(CONFIG_ARCH_OMAP2) += clkt2xxx_dpll.o
-obj-$(CONFIG_SOC_OMAP2430) += clock2430.o
obj-$(CONFIG_ARCH_OMAP3) += $(clock-common)
obj-$(CONFIG_ARCH_OMAP3) += clock34xx.o clkt34xx_dpll3m2.o
obj-$(CONFIG_ARCH_OMAP3) += clock3517.o
diff --git a/arch/arm/mach-omap2/clock2430.c b/arch/arm/mach-omap2/clock2430.c
deleted file mode 100644
index cef0c8d..0000000
--- a/arch/arm/mach-omap2/clock2430.c
+++ /dev/null
@@ -1,57 +0,0 @@
-/*
- * clock2430.c - OMAP2430-specific clock integration code
- *
- * Copyright (C) 2005-2008 Texas Instruments, Inc.
- * Copyright (C) 2004-2010 Nokia Corporation
- *
- * Contacts:
- * Richard Woodruff <r-woodruff2@ti.com>
- * Paul Walmsley
- *
- * Based on earlier work by Tuukka Tikkanen, Tony Lindgren,
- * Gordon McNutt and RidgeRun, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#undef DEBUG
-
-#include <linux/kernel.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-
-#include "soc.h"
-#include "iomap.h"
-#include "clock.h"
-#include "clock2xxx.h"
-#include "cm2xxx.h"
-#include "cm-regbits-24xx.h"
-
-/**
- * omap2430_clk_i2chs_find_idlest - return CM_IDLEST info for 2430 I2CHS
- * @clk: struct clk * being enabled
- * @idlest_reg: void __iomem ** to store CM_IDLEST reg address into
- * @idlest_bit: pointer to a u8 to store the CM_IDLEST bit shift into
- * @idlest_val: pointer to a u8 to store the CM_IDLEST indicator
- *
- * OMAP2430 I2CHS CM_IDLEST bits are in CM_IDLEST1_CORE, but the
- * CM_*CLKEN bits are in CM_{I,F}CLKEN2_CORE. This custom function
- * passes back the correct CM_IDLEST register address for I2CHS
- * modules. No return value.
- */
-static void omap2430_clk_i2chs_find_idlest(struct clk_hw_omap *clk,
- void __iomem **idlest_reg,
- u8 *idlest_bit,
- u8 *idlest_val)
-{
- *idlest_reg = OMAP2430_CM_REGADDR(CORE_MOD, CM_IDLEST);
- *idlest_bit = clk->enable_bit;
- *idlest_val = OMAP24XX_CM_IDLEST_VAL;
-}
-
-/* 2430 I2CHS has non-standard IDLEST register */
-const struct clk_hw_omap_ops clkhwops_omap2430_i2chs_wait = {
- .find_idlest = omap2430_clk_i2chs_find_idlest,
- .find_companion = omap2_clk_dflt_find_companion,
-};
diff --git a/drivers/clk/ti/clkt_iclk.c b/drivers/clk/ti/clkt_iclk.c
index a03919d..38c3690 100644
--- a/drivers/clk/ti/clkt_iclk.c
+++ b/drivers/clk/ti/clkt_iclk.c
@@ -18,8 +18,12 @@
#include "clock.h"
/* Register offsets */
+#define OMAP24XX_CM_FCLKEN2 0x04
#define CM_AUTOIDLE 0x30
#define CM_ICLKEN 0x10
+#define CM_IDLEST 0x20
+
+#define OMAP24XX_CM_IDLEST_VAL 0
/* Private functions */
@@ -51,6 +55,31 @@ void omap2_clkt_iclk_deny_idle(struct clk_hw_omap *clk)
ti_clk_ll_ops->clk_writel(v, r);
}
+/**
+ * omap2430_clk_i2chs_find_idlest - return CM_IDLEST info for 2430 I2CHS
+ * @clk: struct clk * being enabled
+ * @idlest_reg: void __iomem ** to store CM_IDLEST reg address into
+ * @idlest_bit: pointer to a u8 to store the CM_IDLEST bit shift into
+ * @idlest_val: pointer to a u8 to store the CM_IDLEST indicator
+ *
+ * OMAP2430 I2CHS CM_IDLEST bits are in CM_IDLEST1_CORE, but the
+ * CM_*CLKEN bits are in CM_{I,F}CLKEN2_CORE. This custom function
+ * passes back the correct CM_IDLEST register address for I2CHS
+ * modules. No return value.
+ */
+static void omap2430_clk_i2chs_find_idlest(struct clk_hw_omap *clk,
+ void __iomem **idlest_reg,
+ u8 *idlest_bit,
+ u8 *idlest_val)
+{
+ u32 r;
+
+ r = ((__force u32)clk->enable_reg ^ (OMAP24XX_CM_FCLKEN2 ^ CM_IDLEST));
+ *idlest_reg = (__force void __iomem *)r;
+ *idlest_bit = clk->enable_bit;
+ *idlest_val = OMAP24XX_CM_IDLEST_VAL;
+}
+
/* Public data */
const struct clk_hw_omap_ops clkhwops_iclk = {
@@ -64,3 +93,9 @@ const struct clk_hw_omap_ops clkhwops_iclk_wait = {
.find_idlest = omap2_clk_dflt_find_idlest,
.find_companion = omap2_clk_dflt_find_companion,
};
+
+/* 2430 I2CHS has non-standard IDLEST register */
+const struct clk_hw_omap_ops clkhwops_omap2430_i2chs_wait = {
+ .find_idlest = omap2430_clk_i2chs_find_idlest,
+ .find_companion = omap2_clk_dflt_find_companion,
+};
diff --git a/drivers/clk/ti/clock.h b/drivers/clk/ti/clock.h
index f215383..3652c26 100644
--- a/drivers/clk/ti/clock.h
+++ b/drivers/clk/ti/clock.h
@@ -178,6 +178,7 @@ extern const struct clk_hw_omap_ops clkhwops_omap4_dpllmx;
extern const struct clk_hw_omap_ops clkhwops_wait;
extern const struct clk_hw_omap_ops clkhwops_iclk;
extern const struct clk_hw_omap_ops clkhwops_iclk_wait;
+extern const struct clk_hw_omap_ops clkhwops_omap2430_i2chs_wait;
int omap2_dflt_clk_enable(struct clk_hw *hw);
void omap2_dflt_clk_disable(struct clk_hw *hw);
diff --git a/include/linux/clk/ti.h b/include/linux/clk/ti.h
index 891fe0f..a7728f7 100644
--- a/include/linux/clk/ti.h
+++ b/include/linux/clk/ti.h
@@ -333,7 +333,6 @@ void ti_clk_setup_features(struct ti_clk_features *features);
struct ti_clk_features *ti_clk_get_features(void);
extern const struct clk_hw_omap_ops clkhwops_omap2xxx_dpll;
-extern const struct clk_hw_omap_ops clkhwops_omap2430_i2chs_wait;
extern const struct clk_hw_omap_ops clkhwops_omap3430es2_dss_usbhost_wait;
extern const struct clk_hw_omap_ops clkhwops_am35xx_ipss_module_wait;
extern const struct clk_hw_omap_ops clkhwops_am35xx_ipss_wait;
--
1.7.9.5
^ permalink raw reply related [flat|nested] 120+ messages in thread
* [PATCHv2 18/27] clk: ti: omap2430: move clock support code under clock driver
@ 2015-05-11 8:54 ` Tero Kristo
0 siblings, 0 replies; 120+ messages in thread
From: Tero Kristo @ 2015-05-11 8:54 UTC (permalink / raw)
To: linux-arm-kernel
With the legacy clock support gone, this is no longer needed under
platform code-base. Thus, move this under the TI clock driver, and
remove the exported API from the public header.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
---
arch/arm/mach-omap2/Makefile | 1 -
arch/arm/mach-omap2/clock2430.c | 57 ---------------------------------------
drivers/clk/ti/clkt_iclk.c | 35 ++++++++++++++++++++++++
drivers/clk/ti/clock.h | 1 +
include/linux/clk/ti.h | 1 -
5 files changed, 36 insertions(+), 59 deletions(-)
delete mode 100644 arch/arm/mach-omap2/clock2430.c
diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
index 07052656..695d58f 100644
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -185,7 +185,6 @@ obj-$(CONFIG_ARCH_OMAP2) += $(clock-common)
obj-$(CONFIG_ARCH_OMAP2) += clkt2xxx_dpllcore.o
obj-$(CONFIG_ARCH_OMAP2) += clkt2xxx_virt_prcm_set.o
obj-$(CONFIG_ARCH_OMAP2) += clkt2xxx_dpll.o
-obj-$(CONFIG_SOC_OMAP2430) += clock2430.o
obj-$(CONFIG_ARCH_OMAP3) += $(clock-common)
obj-$(CONFIG_ARCH_OMAP3) += clock34xx.o clkt34xx_dpll3m2.o
obj-$(CONFIG_ARCH_OMAP3) += clock3517.o
diff --git a/arch/arm/mach-omap2/clock2430.c b/arch/arm/mach-omap2/clock2430.c
deleted file mode 100644
index cef0c8d..0000000
--- a/arch/arm/mach-omap2/clock2430.c
+++ /dev/null
@@ -1,57 +0,0 @@
-/*
- * clock2430.c - OMAP2430-specific clock integration code
- *
- * Copyright (C) 2005-2008 Texas Instruments, Inc.
- * Copyright (C) 2004-2010 Nokia Corporation
- *
- * Contacts:
- * Richard Woodruff <r-woodruff2@ti.com>
- * Paul Walmsley
- *
- * Based on earlier work by Tuukka Tikkanen, Tony Lindgren,
- * Gordon McNutt and RidgeRun, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#undef DEBUG
-
-#include <linux/kernel.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-
-#include "soc.h"
-#include "iomap.h"
-#include "clock.h"
-#include "clock2xxx.h"
-#include "cm2xxx.h"
-#include "cm-regbits-24xx.h"
-
-/**
- * omap2430_clk_i2chs_find_idlest - return CM_IDLEST info for 2430 I2CHS
- * @clk: struct clk * being enabled
- * @idlest_reg: void __iomem ** to store CM_IDLEST reg address into
- * @idlest_bit: pointer to a u8 to store the CM_IDLEST bit shift into
- * @idlest_val: pointer to a u8 to store the CM_IDLEST indicator
- *
- * OMAP2430 I2CHS CM_IDLEST bits are in CM_IDLEST1_CORE, but the
- * CM_*CLKEN bits are in CM_{I,F}CLKEN2_CORE. This custom function
- * passes back the correct CM_IDLEST register address for I2CHS
- * modules. No return value.
- */
-static void omap2430_clk_i2chs_find_idlest(struct clk_hw_omap *clk,
- void __iomem **idlest_reg,
- u8 *idlest_bit,
- u8 *idlest_val)
-{
- *idlest_reg = OMAP2430_CM_REGADDR(CORE_MOD, CM_IDLEST);
- *idlest_bit = clk->enable_bit;
- *idlest_val = OMAP24XX_CM_IDLEST_VAL;
-}
-
-/* 2430 I2CHS has non-standard IDLEST register */
-const struct clk_hw_omap_ops clkhwops_omap2430_i2chs_wait = {
- .find_idlest = omap2430_clk_i2chs_find_idlest,
- .find_companion = omap2_clk_dflt_find_companion,
-};
diff --git a/drivers/clk/ti/clkt_iclk.c b/drivers/clk/ti/clkt_iclk.c
index a03919d..38c3690 100644
--- a/drivers/clk/ti/clkt_iclk.c
+++ b/drivers/clk/ti/clkt_iclk.c
@@ -18,8 +18,12 @@
#include "clock.h"
/* Register offsets */
+#define OMAP24XX_CM_FCLKEN2 0x04
#define CM_AUTOIDLE 0x30
#define CM_ICLKEN 0x10
+#define CM_IDLEST 0x20
+
+#define OMAP24XX_CM_IDLEST_VAL 0
/* Private functions */
@@ -51,6 +55,31 @@ void omap2_clkt_iclk_deny_idle(struct clk_hw_omap *clk)
ti_clk_ll_ops->clk_writel(v, r);
}
+/**
+ * omap2430_clk_i2chs_find_idlest - return CM_IDLEST info for 2430 I2CHS
+ * @clk: struct clk * being enabled
+ * @idlest_reg: void __iomem ** to store CM_IDLEST reg address into
+ * @idlest_bit: pointer to a u8 to store the CM_IDLEST bit shift into
+ * @idlest_val: pointer to a u8 to store the CM_IDLEST indicator
+ *
+ * OMAP2430 I2CHS CM_IDLEST bits are in CM_IDLEST1_CORE, but the
+ * CM_*CLKEN bits are in CM_{I,F}CLKEN2_CORE. This custom function
+ * passes back the correct CM_IDLEST register address for I2CHS
+ * modules. No return value.
+ */
+static void omap2430_clk_i2chs_find_idlest(struct clk_hw_omap *clk,
+ void __iomem **idlest_reg,
+ u8 *idlest_bit,
+ u8 *idlest_val)
+{
+ u32 r;
+
+ r = ((__force u32)clk->enable_reg ^ (OMAP24XX_CM_FCLKEN2 ^ CM_IDLEST));
+ *idlest_reg = (__force void __iomem *)r;
+ *idlest_bit = clk->enable_bit;
+ *idlest_val = OMAP24XX_CM_IDLEST_VAL;
+}
+
/* Public data */
const struct clk_hw_omap_ops clkhwops_iclk = {
@@ -64,3 +93,9 @@ const struct clk_hw_omap_ops clkhwops_iclk_wait = {
.find_idlest = omap2_clk_dflt_find_idlest,
.find_companion = omap2_clk_dflt_find_companion,
};
+
+/* 2430 I2CHS has non-standard IDLEST register */
+const struct clk_hw_omap_ops clkhwops_omap2430_i2chs_wait = {
+ .find_idlest = omap2430_clk_i2chs_find_idlest,
+ .find_companion = omap2_clk_dflt_find_companion,
+};
diff --git a/drivers/clk/ti/clock.h b/drivers/clk/ti/clock.h
index f215383..3652c26 100644
--- a/drivers/clk/ti/clock.h
+++ b/drivers/clk/ti/clock.h
@@ -178,6 +178,7 @@ extern const struct clk_hw_omap_ops clkhwops_omap4_dpllmx;
extern const struct clk_hw_omap_ops clkhwops_wait;
extern const struct clk_hw_omap_ops clkhwops_iclk;
extern const struct clk_hw_omap_ops clkhwops_iclk_wait;
+extern const struct clk_hw_omap_ops clkhwops_omap2430_i2chs_wait;
int omap2_dflt_clk_enable(struct clk_hw *hw);
void omap2_dflt_clk_disable(struct clk_hw *hw);
diff --git a/include/linux/clk/ti.h b/include/linux/clk/ti.h
index 891fe0f..a7728f7 100644
--- a/include/linux/clk/ti.h
+++ b/include/linux/clk/ti.h
@@ -333,7 +333,6 @@ void ti_clk_setup_features(struct ti_clk_features *features);
struct ti_clk_features *ti_clk_get_features(void);
extern const struct clk_hw_omap_ops clkhwops_omap2xxx_dpll;
-extern const struct clk_hw_omap_ops clkhwops_omap2430_i2chs_wait;
extern const struct clk_hw_omap_ops clkhwops_omap3430es2_dss_usbhost_wait;
extern const struct clk_hw_omap_ops clkhwops_am35xx_ipss_module_wait;
extern const struct clk_hw_omap_ops clkhwops_am35xx_ipss_wait;
--
1.7.9.5
^ permalink raw reply related [flat|nested] 120+ messages in thread
* [PATCHv2 19/27] clk: ti: clkdm: move clkdm gate clock support code to clock driver
2015-05-11 8:54 ` Tero Kristo
(?)
@ 2015-05-11 8:54 ` Tero Kristo
-1 siblings, 0 replies; 120+ messages in thread
From: Tero Kristo @ 2015-05-11 8:54 UTC (permalink / raw)
To: mturquette, tony, linux-omap, linux-clk, sboyd, paul; +Cc: linux-arm-kernel
With the legacy clock data gone, this is no longer needed under platform,
so move it under the clock driver itself. Remove the exported clock driver
APIs as well, as these are not needed outside clock driver anymore.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
---
arch/arm/mach-omap2/clock.c | 76 ------------------------------------------
arch/arm/mach-omap2/clock.h | 3 --
drivers/clk/ti/clock.h | 3 ++
drivers/clk/ti/clockdomain.c | 76 ++++++++++++++++++++++++++++++++++++++++++
include/linux/clk/ti.h | 2 --
5 files changed, 79 insertions(+), 81 deletions(-)
diff --git a/arch/arm/mach-omap2/clock.c b/arch/arm/mach-omap2/clock.c
index 38a336b..99875db 100644
--- a/arch/arm/mach-omap2/clock.c
+++ b/arch/arm/mach-omap2/clock.c
@@ -202,82 +202,6 @@ void omap2_init_clk_clkdm(struct clk_hw *hw)
}
}
-/**
- * omap2_clkops_enable_clkdm - increment usecount on clkdm of @hw
- * @hw: struct clk_hw * of the clock being enabled
- *
- * Increment the usecount of the clockdomain of the clock pointed to
- * by @hw; if the usecount is 1, the clockdomain will be "enabled."
- * Only needed for clocks that don't use omap2_dflt_clk_enable() as
- * their enable function pointer. Passes along the return value of
- * clkdm_clk_enable(), -EINVAL if @hw is not associated with a
- * clockdomain, or 0 if clock framework-based clockdomain control is
- * not implemented.
- */
-int omap2_clkops_enable_clkdm(struct clk_hw *hw)
-{
- struct clk_hw_omap *clk;
- int ret = 0;
-
- clk = to_clk_hw_omap(hw);
-
- if (unlikely(!clk->clkdm)) {
- pr_err("%s: %s: no clkdm set ?!\n", __func__,
- __clk_get_name(hw->clk));
- return -EINVAL;
- }
-
- if (unlikely(clk->enable_reg))
- pr_err("%s: %s: should use dflt_clk_enable ?!\n", __func__,
- __clk_get_name(hw->clk));
-
- if (ti_clk_get_features()->flags & TI_CLK_DISABLE_CLKDM_CONTROL) {
- pr_err("%s: %s: clkfw-based clockdomain control disabled ?!\n",
- __func__, __clk_get_name(hw->clk));
- return 0;
- }
-
- ret = clkdm_clk_enable(clk->clkdm, hw->clk);
- WARN(ret, "%s: could not enable %s's clockdomain %s: %d\n",
- __func__, __clk_get_name(hw->clk), clk->clkdm->name, ret);
-
- return ret;
-}
-
-/**
- * omap2_clkops_disable_clkdm - decrement usecount on clkdm of @hw
- * @hw: struct clk_hw * of the clock being disabled
- *
- * Decrement the usecount of the clockdomain of the clock pointed to
- * by @hw; if the usecount is 0, the clockdomain will be "disabled."
- * Only needed for clocks that don't use omap2_dflt_clk_disable() as their
- * disable function pointer. No return value.
- */
-void omap2_clkops_disable_clkdm(struct clk_hw *hw)
-{
- struct clk_hw_omap *clk;
-
- clk = to_clk_hw_omap(hw);
-
- if (unlikely(!clk->clkdm)) {
- pr_err("%s: %s: no clkdm set ?!\n", __func__,
- __clk_get_name(hw->clk));
- return;
- }
-
- if (unlikely(clk->enable_reg))
- pr_err("%s: %s: should use dflt_clk_disable ?!\n", __func__,
- __clk_get_name(hw->clk));
-
- if (ti_clk_get_features()->flags & TI_CLK_DISABLE_CLKDM_CONTROL) {
- pr_err("%s: %s: clkfw-based clockdomain control disabled ?!\n",
- __func__, __clk_get_name(hw->clk));
- return;
- }
-
- clkdm_clk_disable(clk->clkdm, hw->clk);
-}
-
static int __initdata mpurate;
/*
diff --git a/arch/arm/mach-omap2/clock.h b/arch/arm/mach-omap2/clock.h
index 9480654..a7e9511 100644
--- a/arch/arm/mach-omap2/clock.h
+++ b/arch/arm/mach-omap2/clock.h
@@ -202,9 +202,6 @@ extern const struct clk_hw_omap_ops clkhwops_am35xx_ipss_module_wait;
extern const struct clk_hw_omap_ops clkhwops_apll54;
extern const struct clk_hw_omap_ops clkhwops_apll96;
-extern int omap2_clkops_enable_clkdm(struct clk_hw *hw);
-extern void omap2_clkops_disable_clkdm(struct clk_hw *hw);
-
struct regmap;
int __init omap2_clk_provider_init(struct device_node *np, int index,
diff --git a/drivers/clk/ti/clock.h b/drivers/clk/ti/clock.h
index 3652c26..83476d1 100644
--- a/drivers/clk/ti/clock.h
+++ b/drivers/clk/ti/clock.h
@@ -180,6 +180,9 @@ extern const struct clk_hw_omap_ops clkhwops_iclk;
extern const struct clk_hw_omap_ops clkhwops_iclk_wait;
extern const struct clk_hw_omap_ops clkhwops_omap2430_i2chs_wait;
+int omap2_clkops_enable_clkdm(struct clk_hw *hw);
+void omap2_clkops_disable_clkdm(struct clk_hw *hw);
+
int omap2_dflt_clk_enable(struct clk_hw *hw);
void omap2_dflt_clk_disable(struct clk_hw *hw);
int omap2_dflt_clk_is_enabled(struct clk_hw *hw);
diff --git a/drivers/clk/ti/clockdomain.c b/drivers/clk/ti/clockdomain.c
index 35fe108..61ef87b 100644
--- a/drivers/clk/ti/clockdomain.c
+++ b/drivers/clk/ti/clockdomain.c
@@ -24,6 +24,82 @@
#undef pr_fmt
#define pr_fmt(fmt) "%s: " fmt, __func__
+/**
+ * omap2_clkops_enable_clkdm - increment usecount on clkdm of @hw
+ * @hw: struct clk_hw * of the clock being enabled
+ *
+ * Increment the usecount of the clockdomain of the clock pointed to
+ * by @hw; if the usecount is 1, the clockdomain will be "enabled."
+ * Only needed for clocks that don't use omap2_dflt_clk_enable() as
+ * their enable function pointer. Passes along the return value of
+ * clkdm_clk_enable(), -EINVAL if @hw is not associated with a
+ * clockdomain, or 0 if clock framework-based clockdomain control is
+ * not implemented.
+ */
+int omap2_clkops_enable_clkdm(struct clk_hw *hw)
+{
+ struct clk_hw_omap *clk;
+ int ret = 0;
+
+ clk = to_clk_hw_omap(hw);
+
+ if (unlikely(!clk->clkdm)) {
+ pr_err("%s: %s: no clkdm set ?!\n", __func__,
+ __clk_get_name(hw->clk));
+ return -EINVAL;
+ }
+
+ if (unlikely(clk->enable_reg))
+ pr_err("%s: %s: should use dflt_clk_enable ?!\n", __func__,
+ __clk_get_name(hw->clk));
+
+ if (ti_clk_get_features()->flags & TI_CLK_DISABLE_CLKDM_CONTROL) {
+ pr_err("%s: %s: clkfw-based clockdomain control disabled ?!\n",
+ __func__, __clk_get_name(hw->clk));
+ return 0;
+ }
+
+ ret = ti_clk_ll_ops->clkdm_clk_enable(clk->clkdm, hw->clk);
+ WARN(ret, "%s: could not enable %s's clockdomain %s: %d\n",
+ __func__, __clk_get_name(hw->clk), clk->clkdm_name, ret);
+
+ return ret;
+}
+
+/**
+ * omap2_clkops_disable_clkdm - decrement usecount on clkdm of @hw
+ * @hw: struct clk_hw * of the clock being disabled
+ *
+ * Decrement the usecount of the clockdomain of the clock pointed to
+ * by @hw; if the usecount is 0, the clockdomain will be "disabled."
+ * Only needed for clocks that don't use omap2_dflt_clk_disable() as their
+ * disable function pointer. No return value.
+ */
+void omap2_clkops_disable_clkdm(struct clk_hw *hw)
+{
+ struct clk_hw_omap *clk;
+
+ clk = to_clk_hw_omap(hw);
+
+ if (unlikely(!clk->clkdm)) {
+ pr_err("%s: %s: no clkdm set ?!\n", __func__,
+ __clk_get_name(hw->clk));
+ return;
+ }
+
+ if (unlikely(clk->enable_reg))
+ pr_err("%s: %s: should use dflt_clk_disable ?!\n", __func__,
+ __clk_get_name(hw->clk));
+
+ if (ti_clk_get_features()->flags & TI_CLK_DISABLE_CLKDM_CONTROL) {
+ pr_err("%s: %s: clkfw-based clockdomain control disabled ?!\n",
+ __func__, __clk_get_name(hw->clk));
+ return;
+ }
+
+ ti_clk_ll_ops->clkdm_clk_disable(clk->clkdm, hw->clk);
+}
+
static void __init of_ti_clockdomain_setup(struct device_node *node)
{
struct clk *clk;
diff --git a/include/linux/clk/ti.h b/include/linux/clk/ti.h
index a7728f7..6361f21 100644
--- a/include/linux/clk/ti.h
+++ b/include/linux/clk/ti.h
@@ -272,8 +272,6 @@ extern const struct clk_ops ti_clk_mux_ops;
#define to_clk_hw_omap(_hw) container_of(_hw, struct clk_hw_omap, hw)
void omap2_init_clk_clkdm(struct clk_hw *clk);
-int omap2_clkops_enable_clkdm(struct clk_hw *hw);
-void omap2_clkops_disable_clkdm(struct clk_hw *hw);
int omap2_clk_disable_autoidle_all(void);
int omap2_clk_enable_autoidle_all(void);
int omap2_clk_allow_idle(struct clk *clk);
--
1.7.9.5
^ permalink raw reply related [flat|nested] 120+ messages in thread
* [PATCHv2 19/27] clk: ti: clkdm: move clkdm gate clock support code to clock driver
@ 2015-05-11 8:54 ` Tero Kristo
0 siblings, 0 replies; 120+ messages in thread
From: Tero Kristo @ 2015-05-11 8:54 UTC (permalink / raw)
To: mturquette, tony, linux-omap, linux-clk, sboyd, paul; +Cc: linux-arm-kernel
With the legacy clock data gone, this is no longer needed under platform,
so move it under the clock driver itself. Remove the exported clock driver
APIs as well, as these are not needed outside clock driver anymore.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
---
arch/arm/mach-omap2/clock.c | 76 ------------------------------------------
arch/arm/mach-omap2/clock.h | 3 --
drivers/clk/ti/clock.h | 3 ++
drivers/clk/ti/clockdomain.c | 76 ++++++++++++++++++++++++++++++++++++++++++
include/linux/clk/ti.h | 2 --
5 files changed, 79 insertions(+), 81 deletions(-)
diff --git a/arch/arm/mach-omap2/clock.c b/arch/arm/mach-omap2/clock.c
index 38a336b..99875db 100644
--- a/arch/arm/mach-omap2/clock.c
+++ b/arch/arm/mach-omap2/clock.c
@@ -202,82 +202,6 @@ void omap2_init_clk_clkdm(struct clk_hw *hw)
}
}
-/**
- * omap2_clkops_enable_clkdm - increment usecount on clkdm of @hw
- * @hw: struct clk_hw * of the clock being enabled
- *
- * Increment the usecount of the clockdomain of the clock pointed to
- * by @hw; if the usecount is 1, the clockdomain will be "enabled."
- * Only needed for clocks that don't use omap2_dflt_clk_enable() as
- * their enable function pointer. Passes along the return value of
- * clkdm_clk_enable(), -EINVAL if @hw is not associated with a
- * clockdomain, or 0 if clock framework-based clockdomain control is
- * not implemented.
- */
-int omap2_clkops_enable_clkdm(struct clk_hw *hw)
-{
- struct clk_hw_omap *clk;
- int ret = 0;
-
- clk = to_clk_hw_omap(hw);
-
- if (unlikely(!clk->clkdm)) {
- pr_err("%s: %s: no clkdm set ?!\n", __func__,
- __clk_get_name(hw->clk));
- return -EINVAL;
- }
-
- if (unlikely(clk->enable_reg))
- pr_err("%s: %s: should use dflt_clk_enable ?!\n", __func__,
- __clk_get_name(hw->clk));
-
- if (ti_clk_get_features()->flags & TI_CLK_DISABLE_CLKDM_CONTROL) {
- pr_err("%s: %s: clkfw-based clockdomain control disabled ?!\n",
- __func__, __clk_get_name(hw->clk));
- return 0;
- }
-
- ret = clkdm_clk_enable(clk->clkdm, hw->clk);
- WARN(ret, "%s: could not enable %s's clockdomain %s: %d\n",
- __func__, __clk_get_name(hw->clk), clk->clkdm->name, ret);
-
- return ret;
-}
-
-/**
- * omap2_clkops_disable_clkdm - decrement usecount on clkdm of @hw
- * @hw: struct clk_hw * of the clock being disabled
- *
- * Decrement the usecount of the clockdomain of the clock pointed to
- * by @hw; if the usecount is 0, the clockdomain will be "disabled."
- * Only needed for clocks that don't use omap2_dflt_clk_disable() as their
- * disable function pointer. No return value.
- */
-void omap2_clkops_disable_clkdm(struct clk_hw *hw)
-{
- struct clk_hw_omap *clk;
-
- clk = to_clk_hw_omap(hw);
-
- if (unlikely(!clk->clkdm)) {
- pr_err("%s: %s: no clkdm set ?!\n", __func__,
- __clk_get_name(hw->clk));
- return;
- }
-
- if (unlikely(clk->enable_reg))
- pr_err("%s: %s: should use dflt_clk_disable ?!\n", __func__,
- __clk_get_name(hw->clk));
-
- if (ti_clk_get_features()->flags & TI_CLK_DISABLE_CLKDM_CONTROL) {
- pr_err("%s: %s: clkfw-based clockdomain control disabled ?!\n",
- __func__, __clk_get_name(hw->clk));
- return;
- }
-
- clkdm_clk_disable(clk->clkdm, hw->clk);
-}
-
static int __initdata mpurate;
/*
diff --git a/arch/arm/mach-omap2/clock.h b/arch/arm/mach-omap2/clock.h
index 9480654..a7e9511 100644
--- a/arch/arm/mach-omap2/clock.h
+++ b/arch/arm/mach-omap2/clock.h
@@ -202,9 +202,6 @@ extern const struct clk_hw_omap_ops clkhwops_am35xx_ipss_module_wait;
extern const struct clk_hw_omap_ops clkhwops_apll54;
extern const struct clk_hw_omap_ops clkhwops_apll96;
-extern int omap2_clkops_enable_clkdm(struct clk_hw *hw);
-extern void omap2_clkops_disable_clkdm(struct clk_hw *hw);
-
struct regmap;
int __init omap2_clk_provider_init(struct device_node *np, int index,
diff --git a/drivers/clk/ti/clock.h b/drivers/clk/ti/clock.h
index 3652c26..83476d1 100644
--- a/drivers/clk/ti/clock.h
+++ b/drivers/clk/ti/clock.h
@@ -180,6 +180,9 @@ extern const struct clk_hw_omap_ops clkhwops_iclk;
extern const struct clk_hw_omap_ops clkhwops_iclk_wait;
extern const struct clk_hw_omap_ops clkhwops_omap2430_i2chs_wait;
+int omap2_clkops_enable_clkdm(struct clk_hw *hw);
+void omap2_clkops_disable_clkdm(struct clk_hw *hw);
+
int omap2_dflt_clk_enable(struct clk_hw *hw);
void omap2_dflt_clk_disable(struct clk_hw *hw);
int omap2_dflt_clk_is_enabled(struct clk_hw *hw);
diff --git a/drivers/clk/ti/clockdomain.c b/drivers/clk/ti/clockdomain.c
index 35fe108..61ef87b 100644
--- a/drivers/clk/ti/clockdomain.c
+++ b/drivers/clk/ti/clockdomain.c
@@ -24,6 +24,82 @@
#undef pr_fmt
#define pr_fmt(fmt) "%s: " fmt, __func__
+/**
+ * omap2_clkops_enable_clkdm - increment usecount on clkdm of @hw
+ * @hw: struct clk_hw * of the clock being enabled
+ *
+ * Increment the usecount of the clockdomain of the clock pointed to
+ * by @hw; if the usecount is 1, the clockdomain will be "enabled."
+ * Only needed for clocks that don't use omap2_dflt_clk_enable() as
+ * their enable function pointer. Passes along the return value of
+ * clkdm_clk_enable(), -EINVAL if @hw is not associated with a
+ * clockdomain, or 0 if clock framework-based clockdomain control is
+ * not implemented.
+ */
+int omap2_clkops_enable_clkdm(struct clk_hw *hw)
+{
+ struct clk_hw_omap *clk;
+ int ret = 0;
+
+ clk = to_clk_hw_omap(hw);
+
+ if (unlikely(!clk->clkdm)) {
+ pr_err("%s: %s: no clkdm set ?!\n", __func__,
+ __clk_get_name(hw->clk));
+ return -EINVAL;
+ }
+
+ if (unlikely(clk->enable_reg))
+ pr_err("%s: %s: should use dflt_clk_enable ?!\n", __func__,
+ __clk_get_name(hw->clk));
+
+ if (ti_clk_get_features()->flags & TI_CLK_DISABLE_CLKDM_CONTROL) {
+ pr_err("%s: %s: clkfw-based clockdomain control disabled ?!\n",
+ __func__, __clk_get_name(hw->clk));
+ return 0;
+ }
+
+ ret = ti_clk_ll_ops->clkdm_clk_enable(clk->clkdm, hw->clk);
+ WARN(ret, "%s: could not enable %s's clockdomain %s: %d\n",
+ __func__, __clk_get_name(hw->clk), clk->clkdm_name, ret);
+
+ return ret;
+}
+
+/**
+ * omap2_clkops_disable_clkdm - decrement usecount on clkdm of @hw
+ * @hw: struct clk_hw * of the clock being disabled
+ *
+ * Decrement the usecount of the clockdomain of the clock pointed to
+ * by @hw; if the usecount is 0, the clockdomain will be "disabled."
+ * Only needed for clocks that don't use omap2_dflt_clk_disable() as their
+ * disable function pointer. No return value.
+ */
+void omap2_clkops_disable_clkdm(struct clk_hw *hw)
+{
+ struct clk_hw_omap *clk;
+
+ clk = to_clk_hw_omap(hw);
+
+ if (unlikely(!clk->clkdm)) {
+ pr_err("%s: %s: no clkdm set ?!\n", __func__,
+ __clk_get_name(hw->clk));
+ return;
+ }
+
+ if (unlikely(clk->enable_reg))
+ pr_err("%s: %s: should use dflt_clk_disable ?!\n", __func__,
+ __clk_get_name(hw->clk));
+
+ if (ti_clk_get_features()->flags & TI_CLK_DISABLE_CLKDM_CONTROL) {
+ pr_err("%s: %s: clkfw-based clockdomain control disabled ?!\n",
+ __func__, __clk_get_name(hw->clk));
+ return;
+ }
+
+ ti_clk_ll_ops->clkdm_clk_disable(clk->clkdm, hw->clk);
+}
+
static void __init of_ti_clockdomain_setup(struct device_node *node)
{
struct clk *clk;
diff --git a/include/linux/clk/ti.h b/include/linux/clk/ti.h
index a7728f7..6361f21 100644
--- a/include/linux/clk/ti.h
+++ b/include/linux/clk/ti.h
@@ -272,8 +272,6 @@ extern const struct clk_ops ti_clk_mux_ops;
#define to_clk_hw_omap(_hw) container_of(_hw, struct clk_hw_omap, hw)
void omap2_init_clk_clkdm(struct clk_hw *clk);
-int omap2_clkops_enable_clkdm(struct clk_hw *hw);
-void omap2_clkops_disable_clkdm(struct clk_hw *hw);
int omap2_clk_disable_autoidle_all(void);
int omap2_clk_enable_autoidle_all(void);
int omap2_clk_allow_idle(struct clk *clk);
--
1.7.9.5
^ permalink raw reply related [flat|nested] 120+ messages in thread
* [PATCHv2 19/27] clk: ti: clkdm: move clkdm gate clock support code to clock driver
@ 2015-05-11 8:54 ` Tero Kristo
0 siblings, 0 replies; 120+ messages in thread
From: Tero Kristo @ 2015-05-11 8:54 UTC (permalink / raw)
To: linux-arm-kernel
With the legacy clock data gone, this is no longer needed under platform,
so move it under the clock driver itself. Remove the exported clock driver
APIs as well, as these are not needed outside clock driver anymore.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
---
arch/arm/mach-omap2/clock.c | 76 ------------------------------------------
arch/arm/mach-omap2/clock.h | 3 --
drivers/clk/ti/clock.h | 3 ++
drivers/clk/ti/clockdomain.c | 76 ++++++++++++++++++++++++++++++++++++++++++
include/linux/clk/ti.h | 2 --
5 files changed, 79 insertions(+), 81 deletions(-)
diff --git a/arch/arm/mach-omap2/clock.c b/arch/arm/mach-omap2/clock.c
index 38a336b..99875db 100644
--- a/arch/arm/mach-omap2/clock.c
+++ b/arch/arm/mach-omap2/clock.c
@@ -202,82 +202,6 @@ void omap2_init_clk_clkdm(struct clk_hw *hw)
}
}
-/**
- * omap2_clkops_enable_clkdm - increment usecount on clkdm of @hw
- * @hw: struct clk_hw * of the clock being enabled
- *
- * Increment the usecount of the clockdomain of the clock pointed to
- * by @hw; if the usecount is 1, the clockdomain will be "enabled."
- * Only needed for clocks that don't use omap2_dflt_clk_enable() as
- * their enable function pointer. Passes along the return value of
- * clkdm_clk_enable(), -EINVAL if @hw is not associated with a
- * clockdomain, or 0 if clock framework-based clockdomain control is
- * not implemented.
- */
-int omap2_clkops_enable_clkdm(struct clk_hw *hw)
-{
- struct clk_hw_omap *clk;
- int ret = 0;
-
- clk = to_clk_hw_omap(hw);
-
- if (unlikely(!clk->clkdm)) {
- pr_err("%s: %s: no clkdm set ?!\n", __func__,
- __clk_get_name(hw->clk));
- return -EINVAL;
- }
-
- if (unlikely(clk->enable_reg))
- pr_err("%s: %s: should use dflt_clk_enable ?!\n", __func__,
- __clk_get_name(hw->clk));
-
- if (ti_clk_get_features()->flags & TI_CLK_DISABLE_CLKDM_CONTROL) {
- pr_err("%s: %s: clkfw-based clockdomain control disabled ?!\n",
- __func__, __clk_get_name(hw->clk));
- return 0;
- }
-
- ret = clkdm_clk_enable(clk->clkdm, hw->clk);
- WARN(ret, "%s: could not enable %s's clockdomain %s: %d\n",
- __func__, __clk_get_name(hw->clk), clk->clkdm->name, ret);
-
- return ret;
-}
-
-/**
- * omap2_clkops_disable_clkdm - decrement usecount on clkdm of @hw
- * @hw: struct clk_hw * of the clock being disabled
- *
- * Decrement the usecount of the clockdomain of the clock pointed to
- * by @hw; if the usecount is 0, the clockdomain will be "disabled."
- * Only needed for clocks that don't use omap2_dflt_clk_disable() as their
- * disable function pointer. No return value.
- */
-void omap2_clkops_disable_clkdm(struct clk_hw *hw)
-{
- struct clk_hw_omap *clk;
-
- clk = to_clk_hw_omap(hw);
-
- if (unlikely(!clk->clkdm)) {
- pr_err("%s: %s: no clkdm set ?!\n", __func__,
- __clk_get_name(hw->clk));
- return;
- }
-
- if (unlikely(clk->enable_reg))
- pr_err("%s: %s: should use dflt_clk_disable ?!\n", __func__,
- __clk_get_name(hw->clk));
-
- if (ti_clk_get_features()->flags & TI_CLK_DISABLE_CLKDM_CONTROL) {
- pr_err("%s: %s: clkfw-based clockdomain control disabled ?!\n",
- __func__, __clk_get_name(hw->clk));
- return;
- }
-
- clkdm_clk_disable(clk->clkdm, hw->clk);
-}
-
static int __initdata mpurate;
/*
diff --git a/arch/arm/mach-omap2/clock.h b/arch/arm/mach-omap2/clock.h
index 9480654..a7e9511 100644
--- a/arch/arm/mach-omap2/clock.h
+++ b/arch/arm/mach-omap2/clock.h
@@ -202,9 +202,6 @@ extern const struct clk_hw_omap_ops clkhwops_am35xx_ipss_module_wait;
extern const struct clk_hw_omap_ops clkhwops_apll54;
extern const struct clk_hw_omap_ops clkhwops_apll96;
-extern int omap2_clkops_enable_clkdm(struct clk_hw *hw);
-extern void omap2_clkops_disable_clkdm(struct clk_hw *hw);
-
struct regmap;
int __init omap2_clk_provider_init(struct device_node *np, int index,
diff --git a/drivers/clk/ti/clock.h b/drivers/clk/ti/clock.h
index 3652c26..83476d1 100644
--- a/drivers/clk/ti/clock.h
+++ b/drivers/clk/ti/clock.h
@@ -180,6 +180,9 @@ extern const struct clk_hw_omap_ops clkhwops_iclk;
extern const struct clk_hw_omap_ops clkhwops_iclk_wait;
extern const struct clk_hw_omap_ops clkhwops_omap2430_i2chs_wait;
+int omap2_clkops_enable_clkdm(struct clk_hw *hw);
+void omap2_clkops_disable_clkdm(struct clk_hw *hw);
+
int omap2_dflt_clk_enable(struct clk_hw *hw);
void omap2_dflt_clk_disable(struct clk_hw *hw);
int omap2_dflt_clk_is_enabled(struct clk_hw *hw);
diff --git a/drivers/clk/ti/clockdomain.c b/drivers/clk/ti/clockdomain.c
index 35fe108..61ef87b 100644
--- a/drivers/clk/ti/clockdomain.c
+++ b/drivers/clk/ti/clockdomain.c
@@ -24,6 +24,82 @@
#undef pr_fmt
#define pr_fmt(fmt) "%s: " fmt, __func__
+/**
+ * omap2_clkops_enable_clkdm - increment usecount on clkdm of @hw
+ * @hw: struct clk_hw * of the clock being enabled
+ *
+ * Increment the usecount of the clockdomain of the clock pointed to
+ * by @hw; if the usecount is 1, the clockdomain will be "enabled."
+ * Only needed for clocks that don't use omap2_dflt_clk_enable() as
+ * their enable function pointer. Passes along the return value of
+ * clkdm_clk_enable(), -EINVAL if @hw is not associated with a
+ * clockdomain, or 0 if clock framework-based clockdomain control is
+ * not implemented.
+ */
+int omap2_clkops_enable_clkdm(struct clk_hw *hw)
+{
+ struct clk_hw_omap *clk;
+ int ret = 0;
+
+ clk = to_clk_hw_omap(hw);
+
+ if (unlikely(!clk->clkdm)) {
+ pr_err("%s: %s: no clkdm set ?!\n", __func__,
+ __clk_get_name(hw->clk));
+ return -EINVAL;
+ }
+
+ if (unlikely(clk->enable_reg))
+ pr_err("%s: %s: should use dflt_clk_enable ?!\n", __func__,
+ __clk_get_name(hw->clk));
+
+ if (ti_clk_get_features()->flags & TI_CLK_DISABLE_CLKDM_CONTROL) {
+ pr_err("%s: %s: clkfw-based clockdomain control disabled ?!\n",
+ __func__, __clk_get_name(hw->clk));
+ return 0;
+ }
+
+ ret = ti_clk_ll_ops->clkdm_clk_enable(clk->clkdm, hw->clk);
+ WARN(ret, "%s: could not enable %s's clockdomain %s: %d\n",
+ __func__, __clk_get_name(hw->clk), clk->clkdm_name, ret);
+
+ return ret;
+}
+
+/**
+ * omap2_clkops_disable_clkdm - decrement usecount on clkdm of @hw
+ * @hw: struct clk_hw * of the clock being disabled
+ *
+ * Decrement the usecount of the clockdomain of the clock pointed to
+ * by @hw; if the usecount is 0, the clockdomain will be "disabled."
+ * Only needed for clocks that don't use omap2_dflt_clk_disable() as their
+ * disable function pointer. No return value.
+ */
+void omap2_clkops_disable_clkdm(struct clk_hw *hw)
+{
+ struct clk_hw_omap *clk;
+
+ clk = to_clk_hw_omap(hw);
+
+ if (unlikely(!clk->clkdm)) {
+ pr_err("%s: %s: no clkdm set ?!\n", __func__,
+ __clk_get_name(hw->clk));
+ return;
+ }
+
+ if (unlikely(clk->enable_reg))
+ pr_err("%s: %s: should use dflt_clk_disable ?!\n", __func__,
+ __clk_get_name(hw->clk));
+
+ if (ti_clk_get_features()->flags & TI_CLK_DISABLE_CLKDM_CONTROL) {
+ pr_err("%s: %s: clkfw-based clockdomain control disabled ?!\n",
+ __func__, __clk_get_name(hw->clk));
+ return;
+ }
+
+ ti_clk_ll_ops->clkdm_clk_disable(clk->clkdm, hw->clk);
+}
+
static void __init of_ti_clockdomain_setup(struct device_node *node)
{
struct clk *clk;
diff --git a/include/linux/clk/ti.h b/include/linux/clk/ti.h
index a7728f7..6361f21 100644
--- a/include/linux/clk/ti.h
+++ b/include/linux/clk/ti.h
@@ -272,8 +272,6 @@ extern const struct clk_ops ti_clk_mux_ops;
#define to_clk_hw_omap(_hw) container_of(_hw, struct clk_hw_omap, hw)
void omap2_init_clk_clkdm(struct clk_hw *clk);
-int omap2_clkops_enable_clkdm(struct clk_hw *hw);
-void omap2_clkops_disable_clkdm(struct clk_hw *hw);
int omap2_clk_disable_autoidle_all(void);
int omap2_clk_enable_autoidle_all(void);
int omap2_clk_allow_idle(struct clk *clk);
--
1.7.9.5
^ permalink raw reply related [flat|nested] 120+ messages in thread
* [PATCHv2 20/27] clk: ti: omap34xx: move omap34xx clock type support code to clock driver
2015-05-11 8:54 ` Tero Kristo
(?)
@ 2015-05-11 8:54 ` Tero Kristo
-1 siblings, 0 replies; 120+ messages in thread
From: Tero Kristo @ 2015-05-11 8:54 UTC (permalink / raw)
To: mturquette, tony, linux-omap, linux-clk, sboyd, paul; +Cc: linux-arm-kernel
With the legacy clock data gone, this is no longer needed under platform,
so move it under the clock driver itself. Remove unnecessary declarations
from the TI clock header also.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
---
arch/arm/mach-omap2/Makefile | 2 +-
arch/arm/mach-omap2/clock34xx.c | 138 ---------------------------------------
drivers/clk/ti/clk-3xxx.c | 118 +++++++++++++++++++++++++++++++++
drivers/clk/ti/clock.h | 4 ++
include/linux/clk/ti.h | 4 --
5 files changed, 123 insertions(+), 143 deletions(-)
delete mode 100644 arch/arm/mach-omap2/clock34xx.c
diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
index 695d58f..22d2e48 100644
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -186,7 +186,7 @@ obj-$(CONFIG_ARCH_OMAP2) += clkt2xxx_dpllcore.o
obj-$(CONFIG_ARCH_OMAP2) += clkt2xxx_virt_prcm_set.o
obj-$(CONFIG_ARCH_OMAP2) += clkt2xxx_dpll.o
obj-$(CONFIG_ARCH_OMAP3) += $(clock-common)
-obj-$(CONFIG_ARCH_OMAP3) += clock34xx.o clkt34xx_dpll3m2.o
+obj-$(CONFIG_ARCH_OMAP3) += clkt34xx_dpll3m2.o
obj-$(CONFIG_ARCH_OMAP3) += clock3517.o
obj-$(CONFIG_ARCH_OMAP4) += $(clock-common)
obj-$(CONFIG_SOC_AM33XX) += $(clock-common)
diff --git a/arch/arm/mach-omap2/clock34xx.c b/arch/arm/mach-omap2/clock34xx.c
deleted file mode 100644
index 4596468..0000000
--- a/arch/arm/mach-omap2/clock34xx.c
+++ /dev/null
@@ -1,138 +0,0 @@
-/*
- * OMAP3-specific clock framework functions
- *
- * Copyright (C) 2007-2008 Texas Instruments, Inc.
- * Copyright (C) 2007-2011 Nokia Corporation
- *
- * Paul Walmsley
- * Jouni Högander
- *
- * Parts of this code are based on code written by
- * Richard Woodruff, Tony Lindgren, Tuukka Tikkanen, Karthik Dasu,
- * Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#undef DEBUG
-
-#include <linux/kernel.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-
-#include "clock.h"
-#include "clock34xx.h"
-#include "cm3xxx.h"
-#include "cm-regbits-34xx.h"
-
-/**
- * omap3430es2_clk_ssi_find_idlest - return CM_IDLEST info for SSI
- * @clk: struct clk * being enabled
- * @idlest_reg: void __iomem ** to store CM_IDLEST reg address into
- * @idlest_bit: pointer to a u8 to store the CM_IDLEST bit shift into
- * @idlest_val: pointer to a u8 to store the CM_IDLEST indicator
- *
- * The OMAP3430ES2 SSI target CM_IDLEST bit is at a different shift
- * from the CM_{I,F}CLKEN bit. Pass back the correct info via
- * @idlest_reg and @idlest_bit. No return value.
- */
-static void omap3430es2_clk_ssi_find_idlest(struct clk_hw_omap *clk,
- void __iomem **idlest_reg,
- u8 *idlest_bit,
- u8 *idlest_val)
-{
- u32 r;
-
- r = (((__force u32)clk->enable_reg & ~0xf0) | 0x20);
- *idlest_reg = (__force void __iomem *)r;
- *idlest_bit = OMAP3430ES2_ST_SSI_IDLE_SHIFT;
- *idlest_val = OMAP34XX_CM_IDLEST_VAL;
-}
-const struct clk_hw_omap_ops clkhwops_omap3430es2_ssi_wait = {
- .find_idlest = omap3430es2_clk_ssi_find_idlest,
- .find_companion = omap2_clk_dflt_find_companion,
-};
-
-const struct clk_hw_omap_ops clkhwops_omap3430es2_iclk_ssi_wait = {
- .allow_idle = omap2_clkt_iclk_allow_idle,
- .deny_idle = omap2_clkt_iclk_deny_idle,
- .find_idlest = omap3430es2_clk_ssi_find_idlest,
- .find_companion = omap2_clk_dflt_find_companion,
-};
-
-/**
- * omap3430es2_clk_dss_usbhost_find_idlest - CM_IDLEST info for DSS, USBHOST
- * @clk: struct clk * being enabled
- * @idlest_reg: void __iomem ** to store CM_IDLEST reg address into
- * @idlest_bit: pointer to a u8 to store the CM_IDLEST bit shift into
- * @idlest_val: pointer to a u8 to store the CM_IDLEST indicator
- *
- * Some OMAP modules on OMAP3 ES2+ chips have both initiator and
- * target IDLEST bits. For our purposes, we are concerned with the
- * target IDLEST bits, which exist at a different bit position than
- * the *CLKEN bit position for these modules (DSS and USBHOST) (The
- * default find_idlest code assumes that they are at the same
- * position.) No return value.
- */
-static void omap3430es2_clk_dss_usbhost_find_idlest(struct clk_hw_omap *clk,
- void __iomem **idlest_reg,
- u8 *idlest_bit,
- u8 *idlest_val)
-{
- u32 r;
-
- r = (((__force u32)clk->enable_reg & ~0xf0) | 0x20);
- *idlest_reg = (__force void __iomem *)r;
- /* USBHOST_IDLE has same shift */
- *idlest_bit = OMAP3430ES2_ST_DSS_IDLE_SHIFT;
- *idlest_val = OMAP34XX_CM_IDLEST_VAL;
-}
-
-const struct clk_hw_omap_ops clkhwops_omap3430es2_dss_usbhost_wait = {
- .find_idlest = omap3430es2_clk_dss_usbhost_find_idlest,
- .find_companion = omap2_clk_dflt_find_companion,
-};
-
-const struct clk_hw_omap_ops clkhwops_omap3430es2_iclk_dss_usbhost_wait = {
- .allow_idle = omap2_clkt_iclk_allow_idle,
- .deny_idle = omap2_clkt_iclk_deny_idle,
- .find_idlest = omap3430es2_clk_dss_usbhost_find_idlest,
- .find_companion = omap2_clk_dflt_find_companion,
-};
-
-/**
- * omap3430es2_clk_hsotgusb_find_idlest - return CM_IDLEST info for HSOTGUSB
- * @clk: struct clk * being enabled
- * @idlest_reg: void __iomem ** to store CM_IDLEST reg address into
- * @idlest_bit: pointer to a u8 to store the CM_IDLEST bit shift into
- * @idlest_val: pointer to a u8 to store the CM_IDLEST indicator
- *
- * The OMAP3430ES2 HSOTGUSB target CM_IDLEST bit is at a different
- * shift from the CM_{I,F}CLKEN bit. Pass back the correct info via
- * @idlest_reg and @idlest_bit. No return value.
- */
-static void omap3430es2_clk_hsotgusb_find_idlest(struct clk_hw_omap *clk,
- void __iomem **idlest_reg,
- u8 *idlest_bit,
- u8 *idlest_val)
-{
- u32 r;
-
- r = (((__force u32)clk->enable_reg & ~0xf0) | 0x20);
- *idlest_reg = (__force void __iomem *)r;
- *idlest_bit = OMAP3430ES2_ST_HSOTGUSB_IDLE_SHIFT;
- *idlest_val = OMAP34XX_CM_IDLEST_VAL;
-}
-
-const struct clk_hw_omap_ops clkhwops_omap3430es2_iclk_hsotgusb_wait = {
- .allow_idle = omap2_clkt_iclk_allow_idle,
- .deny_idle = omap2_clkt_iclk_deny_idle,
- .find_idlest = omap3430es2_clk_hsotgusb_find_idlest,
- .find_companion = omap2_clk_dflt_find_companion,
-};
-
-const struct clk_hw_omap_ops clkhwops_omap3430es2_hsotgusb_wait = {
- .find_idlest = omap3430es2_clk_hsotgusb_find_idlest,
- .find_companion = omap2_clk_dflt_find_companion,
-};
diff --git a/drivers/clk/ti/clk-3xxx.c b/drivers/clk/ti/clk-3xxx.c
index 5489ad8..58879f0 100644
--- a/drivers/clk/ti/clk-3xxx.c
+++ b/drivers/clk/ti/clk-3xxx.c
@@ -28,6 +28,124 @@
*/
#define DPLL5_FREQ_FOR_USBHOST 120000000
+#define OMAP3430ES2_ST_DSS_IDLE_SHIFT 1
+#define OMAP3430ES2_ST_HSOTGUSB_IDLE_SHIFT 5
+#define OMAP3430ES2_ST_SSI_IDLE_SHIFT 8
+
+#define OMAP34XX_CM_IDLEST_VAL 1
+
+/**
+ * omap3430es2_clk_ssi_find_idlest - return CM_IDLEST info for SSI
+ * @clk: struct clk * being enabled
+ * @idlest_reg: void __iomem ** to store CM_IDLEST reg address into
+ * @idlest_bit: pointer to a u8 to store the CM_IDLEST bit shift into
+ * @idlest_val: pointer to a u8 to store the CM_IDLEST indicator
+ *
+ * The OMAP3430ES2 SSI target CM_IDLEST bit is at a different shift
+ * from the CM_{I,F}CLKEN bit. Pass back the correct info via
+ * @idlest_reg and @idlest_bit. No return value.
+ */
+static void omap3430es2_clk_ssi_find_idlest(struct clk_hw_omap *clk,
+ void __iomem **idlest_reg,
+ u8 *idlest_bit,
+ u8 *idlest_val)
+{
+ u32 r;
+
+ r = (((__force u32)clk->enable_reg & ~0xf0) | 0x20);
+ *idlest_reg = (__force void __iomem *)r;
+ *idlest_bit = OMAP3430ES2_ST_SSI_IDLE_SHIFT;
+ *idlest_val = OMAP34XX_CM_IDLEST_VAL;
+}
+
+const struct clk_hw_omap_ops clkhwops_omap3430es2_ssi_wait = {
+ .find_idlest = omap3430es2_clk_ssi_find_idlest,
+ .find_companion = omap2_clk_dflt_find_companion,
+};
+
+const struct clk_hw_omap_ops clkhwops_omap3430es2_iclk_ssi_wait = {
+ .allow_idle = omap2_clkt_iclk_allow_idle,
+ .deny_idle = omap2_clkt_iclk_deny_idle,
+ .find_idlest = omap3430es2_clk_ssi_find_idlest,
+ .find_companion = omap2_clk_dflt_find_companion,
+};
+
+/**
+ * omap3430es2_clk_dss_usbhost_find_idlest - CM_IDLEST info for DSS, USBHOST
+ * @clk: struct clk * being enabled
+ * @idlest_reg: void __iomem ** to store CM_IDLEST reg address into
+ * @idlest_bit: pointer to a u8 to store the CM_IDLEST bit shift into
+ * @idlest_val: pointer to a u8 to store the CM_IDLEST indicator
+ *
+ * Some OMAP modules on OMAP3 ES2+ chips have both initiator and
+ * target IDLEST bits. For our purposes, we are concerned with the
+ * target IDLEST bits, which exist at a different bit position than
+ * the *CLKEN bit position for these modules (DSS and USBHOST) (The
+ * default find_idlest code assumes that they are at the same
+ * position.) No return value.
+ */
+static void omap3430es2_clk_dss_usbhost_find_idlest(struct clk_hw_omap *clk,
+ void __iomem **idlest_reg,
+ u8 *idlest_bit,
+ u8 *idlest_val)
+{
+ u32 r;
+
+ r = (((__force u32)clk->enable_reg & ~0xf0) | 0x20);
+ *idlest_reg = (__force void __iomem *)r;
+ /* USBHOST_IDLE has same shift */
+ *idlest_bit = OMAP3430ES2_ST_DSS_IDLE_SHIFT;
+ *idlest_val = OMAP34XX_CM_IDLEST_VAL;
+}
+
+const struct clk_hw_omap_ops clkhwops_omap3430es2_dss_usbhost_wait = {
+ .find_idlest = omap3430es2_clk_dss_usbhost_find_idlest,
+ .find_companion = omap2_clk_dflt_find_companion,
+};
+
+const struct clk_hw_omap_ops clkhwops_omap3430es2_iclk_dss_usbhost_wait = {
+ .allow_idle = omap2_clkt_iclk_allow_idle,
+ .deny_idle = omap2_clkt_iclk_deny_idle,
+ .find_idlest = omap3430es2_clk_dss_usbhost_find_idlest,
+ .find_companion = omap2_clk_dflt_find_companion,
+};
+
+/**
+ * omap3430es2_clk_hsotgusb_find_idlest - return CM_IDLEST info for HSOTGUSB
+ * @clk: struct clk * being enabled
+ * @idlest_reg: void __iomem ** to store CM_IDLEST reg address into
+ * @idlest_bit: pointer to a u8 to store the CM_IDLEST bit shift into
+ * @idlest_val: pointer to a u8 to store the CM_IDLEST indicator
+ *
+ * The OMAP3430ES2 HSOTGUSB target CM_IDLEST bit is at a different
+ * shift from the CM_{I,F}CLKEN bit. Pass back the correct info via
+ * @idlest_reg and @idlest_bit. No return value.
+ */
+static void omap3430es2_clk_hsotgusb_find_idlest(struct clk_hw_omap *clk,
+ void __iomem **idlest_reg,
+ u8 *idlest_bit,
+ u8 *idlest_val)
+{
+ u32 r;
+
+ r = (((__force u32)clk->enable_reg & ~0xf0) | 0x20);
+ *idlest_reg = (__force void __iomem *)r;
+ *idlest_bit = OMAP3430ES2_ST_HSOTGUSB_IDLE_SHIFT;
+ *idlest_val = OMAP34XX_CM_IDLEST_VAL;
+}
+
+const struct clk_hw_omap_ops clkhwops_omap3430es2_iclk_hsotgusb_wait = {
+ .allow_idle = omap2_clkt_iclk_allow_idle,
+ .deny_idle = omap2_clkt_iclk_deny_idle,
+ .find_idlest = omap3430es2_clk_hsotgusb_find_idlest,
+ .find_companion = omap2_clk_dflt_find_companion,
+};
+
+const struct clk_hw_omap_ops clkhwops_omap3430es2_hsotgusb_wait = {
+ .find_idlest = omap3430es2_clk_hsotgusb_find_idlest,
+ .find_companion = omap2_clk_dflt_find_companion,
+};
+
static struct ti_dt_clk omap3xxx_clks[] = {
DT_CLK(NULL, "apb_pclk", "dummy_apb_pclk"),
DT_CLK(NULL, "omap_32k_fck", "omap_32k_fck"),
diff --git a/drivers/clk/ti/clock.h b/drivers/clk/ti/clock.h
index 83476d1..c6fbd15 100644
--- a/drivers/clk/ti/clock.h
+++ b/drivers/clk/ti/clock.h
@@ -179,6 +179,10 @@ extern const struct clk_hw_omap_ops clkhwops_wait;
extern const struct clk_hw_omap_ops clkhwops_iclk;
extern const struct clk_hw_omap_ops clkhwops_iclk_wait;
extern const struct clk_hw_omap_ops clkhwops_omap2430_i2chs_wait;
+extern const struct clk_hw_omap_ops clkhwops_omap3430es2_dss_usbhost_wait;
+extern const struct clk_hw_omap_ops clkhwops_omap3430es2_iclk_hsotgusb_wait;
+extern const struct clk_hw_omap_ops clkhwops_omap3430es2_iclk_dss_usbhost_wait;
+extern const struct clk_hw_omap_ops clkhwops_omap3430es2_iclk_ssi_wait;
int omap2_clkops_enable_clkdm(struct clk_hw *hw);
void omap2_clkops_disable_clkdm(struct clk_hw *hw);
diff --git a/include/linux/clk/ti.h b/include/linux/clk/ti.h
index 6361f21..813b809 100644
--- a/include/linux/clk/ti.h
+++ b/include/linux/clk/ti.h
@@ -331,12 +331,8 @@ void ti_clk_setup_features(struct ti_clk_features *features);
struct ti_clk_features *ti_clk_get_features(void);
extern const struct clk_hw_omap_ops clkhwops_omap2xxx_dpll;
-extern const struct clk_hw_omap_ops clkhwops_omap3430es2_dss_usbhost_wait;
extern const struct clk_hw_omap_ops clkhwops_am35xx_ipss_module_wait;
extern const struct clk_hw_omap_ops clkhwops_am35xx_ipss_wait;
-extern const struct clk_hw_omap_ops clkhwops_omap3430es2_iclk_ssi_wait;
-extern const struct clk_hw_omap_ops clkhwops_omap3430es2_iclk_dss_usbhost_wait;
-extern const struct clk_hw_omap_ops clkhwops_omap3430es2_iclk_hsotgusb_wait;
#ifdef CONFIG_ATAGS
int omap3430_clk_legacy_init(void);
--
1.7.9.5
^ permalink raw reply related [flat|nested] 120+ messages in thread
* [PATCHv2 20/27] clk: ti: omap34xx: move omap34xx clock type support code to clock driver
@ 2015-05-11 8:54 ` Tero Kristo
0 siblings, 0 replies; 120+ messages in thread
From: Tero Kristo @ 2015-05-11 8:54 UTC (permalink / raw)
To: mturquette, tony, linux-omap, linux-clk, sboyd, paul; +Cc: linux-arm-kernel
With the legacy clock data gone, this is no longer needed under platform,
so move it under the clock driver itself. Remove unnecessary declarations
from the TI clock header also.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
---
arch/arm/mach-omap2/Makefile | 2 +-
arch/arm/mach-omap2/clock34xx.c | 138 ---------------------------------------
drivers/clk/ti/clk-3xxx.c | 118 +++++++++++++++++++++++++++++++++
drivers/clk/ti/clock.h | 4 ++
include/linux/clk/ti.h | 4 --
5 files changed, 123 insertions(+), 143 deletions(-)
delete mode 100644 arch/arm/mach-omap2/clock34xx.c
diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
index 695d58f..22d2e48 100644
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -186,7 +186,7 @@ obj-$(CONFIG_ARCH_OMAP2) += clkt2xxx_dpllcore.o
obj-$(CONFIG_ARCH_OMAP2) += clkt2xxx_virt_prcm_set.o
obj-$(CONFIG_ARCH_OMAP2) += clkt2xxx_dpll.o
obj-$(CONFIG_ARCH_OMAP3) += $(clock-common)
-obj-$(CONFIG_ARCH_OMAP3) += clock34xx.o clkt34xx_dpll3m2.o
+obj-$(CONFIG_ARCH_OMAP3) += clkt34xx_dpll3m2.o
obj-$(CONFIG_ARCH_OMAP3) += clock3517.o
obj-$(CONFIG_ARCH_OMAP4) += $(clock-common)
obj-$(CONFIG_SOC_AM33XX) += $(clock-common)
diff --git a/arch/arm/mach-omap2/clock34xx.c b/arch/arm/mach-omap2/clock34xx.c
deleted file mode 100644
index 4596468..0000000
--- a/arch/arm/mach-omap2/clock34xx.c
+++ /dev/null
@@ -1,138 +0,0 @@
-/*
- * OMAP3-specific clock framework functions
- *
- * Copyright (C) 2007-2008 Texas Instruments, Inc.
- * Copyright (C) 2007-2011 Nokia Corporation
- *
- * Paul Walmsley
- * Jouni Högander
- *
- * Parts of this code are based on code written by
- * Richard Woodruff, Tony Lindgren, Tuukka Tikkanen, Karthik Dasu,
- * Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#undef DEBUG
-
-#include <linux/kernel.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-
-#include "clock.h"
-#include "clock34xx.h"
-#include "cm3xxx.h"
-#include "cm-regbits-34xx.h"
-
-/**
- * omap3430es2_clk_ssi_find_idlest - return CM_IDLEST info for SSI
- * @clk: struct clk * being enabled
- * @idlest_reg: void __iomem ** to store CM_IDLEST reg address into
- * @idlest_bit: pointer to a u8 to store the CM_IDLEST bit shift into
- * @idlest_val: pointer to a u8 to store the CM_IDLEST indicator
- *
- * The OMAP3430ES2 SSI target CM_IDLEST bit is at a different shift
- * from the CM_{I,F}CLKEN bit. Pass back the correct info via
- * @idlest_reg and @idlest_bit. No return value.
- */
-static void omap3430es2_clk_ssi_find_idlest(struct clk_hw_omap *clk,
- void __iomem **idlest_reg,
- u8 *idlest_bit,
- u8 *idlest_val)
-{
- u32 r;
-
- r = (((__force u32)clk->enable_reg & ~0xf0) | 0x20);
- *idlest_reg = (__force void __iomem *)r;
- *idlest_bit = OMAP3430ES2_ST_SSI_IDLE_SHIFT;
- *idlest_val = OMAP34XX_CM_IDLEST_VAL;
-}
-const struct clk_hw_omap_ops clkhwops_omap3430es2_ssi_wait = {
- .find_idlest = omap3430es2_clk_ssi_find_idlest,
- .find_companion = omap2_clk_dflt_find_companion,
-};
-
-const struct clk_hw_omap_ops clkhwops_omap3430es2_iclk_ssi_wait = {
- .allow_idle = omap2_clkt_iclk_allow_idle,
- .deny_idle = omap2_clkt_iclk_deny_idle,
- .find_idlest = omap3430es2_clk_ssi_find_idlest,
- .find_companion = omap2_clk_dflt_find_companion,
-};
-
-/**
- * omap3430es2_clk_dss_usbhost_find_idlest - CM_IDLEST info for DSS, USBHOST
- * @clk: struct clk * being enabled
- * @idlest_reg: void __iomem ** to store CM_IDLEST reg address into
- * @idlest_bit: pointer to a u8 to store the CM_IDLEST bit shift into
- * @idlest_val: pointer to a u8 to store the CM_IDLEST indicator
- *
- * Some OMAP modules on OMAP3 ES2+ chips have both initiator and
- * target IDLEST bits. For our purposes, we are concerned with the
- * target IDLEST bits, which exist at a different bit position than
- * the *CLKEN bit position for these modules (DSS and USBHOST) (The
- * default find_idlest code assumes that they are at the same
- * position.) No return value.
- */
-static void omap3430es2_clk_dss_usbhost_find_idlest(struct clk_hw_omap *clk,
- void __iomem **idlest_reg,
- u8 *idlest_bit,
- u8 *idlest_val)
-{
- u32 r;
-
- r = (((__force u32)clk->enable_reg & ~0xf0) | 0x20);
- *idlest_reg = (__force void __iomem *)r;
- /* USBHOST_IDLE has same shift */
- *idlest_bit = OMAP3430ES2_ST_DSS_IDLE_SHIFT;
- *idlest_val = OMAP34XX_CM_IDLEST_VAL;
-}
-
-const struct clk_hw_omap_ops clkhwops_omap3430es2_dss_usbhost_wait = {
- .find_idlest = omap3430es2_clk_dss_usbhost_find_idlest,
- .find_companion = omap2_clk_dflt_find_companion,
-};
-
-const struct clk_hw_omap_ops clkhwops_omap3430es2_iclk_dss_usbhost_wait = {
- .allow_idle = omap2_clkt_iclk_allow_idle,
- .deny_idle = omap2_clkt_iclk_deny_idle,
- .find_idlest = omap3430es2_clk_dss_usbhost_find_idlest,
- .find_companion = omap2_clk_dflt_find_companion,
-};
-
-/**
- * omap3430es2_clk_hsotgusb_find_idlest - return CM_IDLEST info for HSOTGUSB
- * @clk: struct clk * being enabled
- * @idlest_reg: void __iomem ** to store CM_IDLEST reg address into
- * @idlest_bit: pointer to a u8 to store the CM_IDLEST bit shift into
- * @idlest_val: pointer to a u8 to store the CM_IDLEST indicator
- *
- * The OMAP3430ES2 HSOTGUSB target CM_IDLEST bit is at a different
- * shift from the CM_{I,F}CLKEN bit. Pass back the correct info via
- * @idlest_reg and @idlest_bit. No return value.
- */
-static void omap3430es2_clk_hsotgusb_find_idlest(struct clk_hw_omap *clk,
- void __iomem **idlest_reg,
- u8 *idlest_bit,
- u8 *idlest_val)
-{
- u32 r;
-
- r = (((__force u32)clk->enable_reg & ~0xf0) | 0x20);
- *idlest_reg = (__force void __iomem *)r;
- *idlest_bit = OMAP3430ES2_ST_HSOTGUSB_IDLE_SHIFT;
- *idlest_val = OMAP34XX_CM_IDLEST_VAL;
-}
-
-const struct clk_hw_omap_ops clkhwops_omap3430es2_iclk_hsotgusb_wait = {
- .allow_idle = omap2_clkt_iclk_allow_idle,
- .deny_idle = omap2_clkt_iclk_deny_idle,
- .find_idlest = omap3430es2_clk_hsotgusb_find_idlest,
- .find_companion = omap2_clk_dflt_find_companion,
-};
-
-const struct clk_hw_omap_ops clkhwops_omap3430es2_hsotgusb_wait = {
- .find_idlest = omap3430es2_clk_hsotgusb_find_idlest,
- .find_companion = omap2_clk_dflt_find_companion,
-};
diff --git a/drivers/clk/ti/clk-3xxx.c b/drivers/clk/ti/clk-3xxx.c
index 5489ad8..58879f0 100644
--- a/drivers/clk/ti/clk-3xxx.c
+++ b/drivers/clk/ti/clk-3xxx.c
@@ -28,6 +28,124 @@
*/
#define DPLL5_FREQ_FOR_USBHOST 120000000
+#define OMAP3430ES2_ST_DSS_IDLE_SHIFT 1
+#define OMAP3430ES2_ST_HSOTGUSB_IDLE_SHIFT 5
+#define OMAP3430ES2_ST_SSI_IDLE_SHIFT 8
+
+#define OMAP34XX_CM_IDLEST_VAL 1
+
+/**
+ * omap3430es2_clk_ssi_find_idlest - return CM_IDLEST info for SSI
+ * @clk: struct clk * being enabled
+ * @idlest_reg: void __iomem ** to store CM_IDLEST reg address into
+ * @idlest_bit: pointer to a u8 to store the CM_IDLEST bit shift into
+ * @idlest_val: pointer to a u8 to store the CM_IDLEST indicator
+ *
+ * The OMAP3430ES2 SSI target CM_IDLEST bit is at a different shift
+ * from the CM_{I,F}CLKEN bit. Pass back the correct info via
+ * @idlest_reg and @idlest_bit. No return value.
+ */
+static void omap3430es2_clk_ssi_find_idlest(struct clk_hw_omap *clk,
+ void __iomem **idlest_reg,
+ u8 *idlest_bit,
+ u8 *idlest_val)
+{
+ u32 r;
+
+ r = (((__force u32)clk->enable_reg & ~0xf0) | 0x20);
+ *idlest_reg = (__force void __iomem *)r;
+ *idlest_bit = OMAP3430ES2_ST_SSI_IDLE_SHIFT;
+ *idlest_val = OMAP34XX_CM_IDLEST_VAL;
+}
+
+const struct clk_hw_omap_ops clkhwops_omap3430es2_ssi_wait = {
+ .find_idlest = omap3430es2_clk_ssi_find_idlest,
+ .find_companion = omap2_clk_dflt_find_companion,
+};
+
+const struct clk_hw_omap_ops clkhwops_omap3430es2_iclk_ssi_wait = {
+ .allow_idle = omap2_clkt_iclk_allow_idle,
+ .deny_idle = omap2_clkt_iclk_deny_idle,
+ .find_idlest = omap3430es2_clk_ssi_find_idlest,
+ .find_companion = omap2_clk_dflt_find_companion,
+};
+
+/**
+ * omap3430es2_clk_dss_usbhost_find_idlest - CM_IDLEST info for DSS, USBHOST
+ * @clk: struct clk * being enabled
+ * @idlest_reg: void __iomem ** to store CM_IDLEST reg address into
+ * @idlest_bit: pointer to a u8 to store the CM_IDLEST bit shift into
+ * @idlest_val: pointer to a u8 to store the CM_IDLEST indicator
+ *
+ * Some OMAP modules on OMAP3 ES2+ chips have both initiator and
+ * target IDLEST bits. For our purposes, we are concerned with the
+ * target IDLEST bits, which exist at a different bit position than
+ * the *CLKEN bit position for these modules (DSS and USBHOST) (The
+ * default find_idlest code assumes that they are at the same
+ * position.) No return value.
+ */
+static void omap3430es2_clk_dss_usbhost_find_idlest(struct clk_hw_omap *clk,
+ void __iomem **idlest_reg,
+ u8 *idlest_bit,
+ u8 *idlest_val)
+{
+ u32 r;
+
+ r = (((__force u32)clk->enable_reg & ~0xf0) | 0x20);
+ *idlest_reg = (__force void __iomem *)r;
+ /* USBHOST_IDLE has same shift */
+ *idlest_bit = OMAP3430ES2_ST_DSS_IDLE_SHIFT;
+ *idlest_val = OMAP34XX_CM_IDLEST_VAL;
+}
+
+const struct clk_hw_omap_ops clkhwops_omap3430es2_dss_usbhost_wait = {
+ .find_idlest = omap3430es2_clk_dss_usbhost_find_idlest,
+ .find_companion = omap2_clk_dflt_find_companion,
+};
+
+const struct clk_hw_omap_ops clkhwops_omap3430es2_iclk_dss_usbhost_wait = {
+ .allow_idle = omap2_clkt_iclk_allow_idle,
+ .deny_idle = omap2_clkt_iclk_deny_idle,
+ .find_idlest = omap3430es2_clk_dss_usbhost_find_idlest,
+ .find_companion = omap2_clk_dflt_find_companion,
+};
+
+/**
+ * omap3430es2_clk_hsotgusb_find_idlest - return CM_IDLEST info for HSOTGUSB
+ * @clk: struct clk * being enabled
+ * @idlest_reg: void __iomem ** to store CM_IDLEST reg address into
+ * @idlest_bit: pointer to a u8 to store the CM_IDLEST bit shift into
+ * @idlest_val: pointer to a u8 to store the CM_IDLEST indicator
+ *
+ * The OMAP3430ES2 HSOTGUSB target CM_IDLEST bit is at a different
+ * shift from the CM_{I,F}CLKEN bit. Pass back the correct info via
+ * @idlest_reg and @idlest_bit. No return value.
+ */
+static void omap3430es2_clk_hsotgusb_find_idlest(struct clk_hw_omap *clk,
+ void __iomem **idlest_reg,
+ u8 *idlest_bit,
+ u8 *idlest_val)
+{
+ u32 r;
+
+ r = (((__force u32)clk->enable_reg & ~0xf0) | 0x20);
+ *idlest_reg = (__force void __iomem *)r;
+ *idlest_bit = OMAP3430ES2_ST_HSOTGUSB_IDLE_SHIFT;
+ *idlest_val = OMAP34XX_CM_IDLEST_VAL;
+}
+
+const struct clk_hw_omap_ops clkhwops_omap3430es2_iclk_hsotgusb_wait = {
+ .allow_idle = omap2_clkt_iclk_allow_idle,
+ .deny_idle = omap2_clkt_iclk_deny_idle,
+ .find_idlest = omap3430es2_clk_hsotgusb_find_idlest,
+ .find_companion = omap2_clk_dflt_find_companion,
+};
+
+const struct clk_hw_omap_ops clkhwops_omap3430es2_hsotgusb_wait = {
+ .find_idlest = omap3430es2_clk_hsotgusb_find_idlest,
+ .find_companion = omap2_clk_dflt_find_companion,
+};
+
static struct ti_dt_clk omap3xxx_clks[] = {
DT_CLK(NULL, "apb_pclk", "dummy_apb_pclk"),
DT_CLK(NULL, "omap_32k_fck", "omap_32k_fck"),
diff --git a/drivers/clk/ti/clock.h b/drivers/clk/ti/clock.h
index 83476d1..c6fbd15 100644
--- a/drivers/clk/ti/clock.h
+++ b/drivers/clk/ti/clock.h
@@ -179,6 +179,10 @@ extern const struct clk_hw_omap_ops clkhwops_wait;
extern const struct clk_hw_omap_ops clkhwops_iclk;
extern const struct clk_hw_omap_ops clkhwops_iclk_wait;
extern const struct clk_hw_omap_ops clkhwops_omap2430_i2chs_wait;
+extern const struct clk_hw_omap_ops clkhwops_omap3430es2_dss_usbhost_wait;
+extern const struct clk_hw_omap_ops clkhwops_omap3430es2_iclk_hsotgusb_wait;
+extern const struct clk_hw_omap_ops clkhwops_omap3430es2_iclk_dss_usbhost_wait;
+extern const struct clk_hw_omap_ops clkhwops_omap3430es2_iclk_ssi_wait;
int omap2_clkops_enable_clkdm(struct clk_hw *hw);
void omap2_clkops_disable_clkdm(struct clk_hw *hw);
diff --git a/include/linux/clk/ti.h b/include/linux/clk/ti.h
index 6361f21..813b809 100644
--- a/include/linux/clk/ti.h
+++ b/include/linux/clk/ti.h
@@ -331,12 +331,8 @@ void ti_clk_setup_features(struct ti_clk_features *features);
struct ti_clk_features *ti_clk_get_features(void);
extern const struct clk_hw_omap_ops clkhwops_omap2xxx_dpll;
-extern const struct clk_hw_omap_ops clkhwops_omap3430es2_dss_usbhost_wait;
extern const struct clk_hw_omap_ops clkhwops_am35xx_ipss_module_wait;
extern const struct clk_hw_omap_ops clkhwops_am35xx_ipss_wait;
-extern const struct clk_hw_omap_ops clkhwops_omap3430es2_iclk_ssi_wait;
-extern const struct clk_hw_omap_ops clkhwops_omap3430es2_iclk_dss_usbhost_wait;
-extern const struct clk_hw_omap_ops clkhwops_omap3430es2_iclk_hsotgusb_wait;
#ifdef CONFIG_ATAGS
int omap3430_clk_legacy_init(void);
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related [flat|nested] 120+ messages in thread
* [PATCHv2 20/27] clk: ti: omap34xx: move omap34xx clock type support code to clock driver
@ 2015-05-11 8:54 ` Tero Kristo
0 siblings, 0 replies; 120+ messages in thread
From: Tero Kristo @ 2015-05-11 8:54 UTC (permalink / raw)
To: linux-arm-kernel
With the legacy clock data gone, this is no longer needed under platform,
so move it under the clock driver itself. Remove unnecessary declarations
from the TI clock header also.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
---
arch/arm/mach-omap2/Makefile | 2 +-
arch/arm/mach-omap2/clock34xx.c | 138 ---------------------------------------
drivers/clk/ti/clk-3xxx.c | 118 +++++++++++++++++++++++++++++++++
drivers/clk/ti/clock.h | 4 ++
include/linux/clk/ti.h | 4 --
5 files changed, 123 insertions(+), 143 deletions(-)
delete mode 100644 arch/arm/mach-omap2/clock34xx.c
diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
index 695d58f..22d2e48 100644
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -186,7 +186,7 @@ obj-$(CONFIG_ARCH_OMAP2) += clkt2xxx_dpllcore.o
obj-$(CONFIG_ARCH_OMAP2) += clkt2xxx_virt_prcm_set.o
obj-$(CONFIG_ARCH_OMAP2) += clkt2xxx_dpll.o
obj-$(CONFIG_ARCH_OMAP3) += $(clock-common)
-obj-$(CONFIG_ARCH_OMAP3) += clock34xx.o clkt34xx_dpll3m2.o
+obj-$(CONFIG_ARCH_OMAP3) += clkt34xx_dpll3m2.o
obj-$(CONFIG_ARCH_OMAP3) += clock3517.o
obj-$(CONFIG_ARCH_OMAP4) += $(clock-common)
obj-$(CONFIG_SOC_AM33XX) += $(clock-common)
diff --git a/arch/arm/mach-omap2/clock34xx.c b/arch/arm/mach-omap2/clock34xx.c
deleted file mode 100644
index 4596468..0000000
--- a/arch/arm/mach-omap2/clock34xx.c
+++ /dev/null
@@ -1,138 +0,0 @@
-/*
- * OMAP3-specific clock framework functions
- *
- * Copyright (C) 2007-2008 Texas Instruments, Inc.
- * Copyright (C) 2007-2011 Nokia Corporation
- *
- * Paul Walmsley
- * Jouni H?gander
- *
- * Parts of this code are based on code written by
- * Richard Woodruff, Tony Lindgren, Tuukka Tikkanen, Karthik Dasu,
- * Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#undef DEBUG
-
-#include <linux/kernel.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-
-#include "clock.h"
-#include "clock34xx.h"
-#include "cm3xxx.h"
-#include "cm-regbits-34xx.h"
-
-/**
- * omap3430es2_clk_ssi_find_idlest - return CM_IDLEST info for SSI
- * @clk: struct clk * being enabled
- * @idlest_reg: void __iomem ** to store CM_IDLEST reg address into
- * @idlest_bit: pointer to a u8 to store the CM_IDLEST bit shift into
- * @idlest_val: pointer to a u8 to store the CM_IDLEST indicator
- *
- * The OMAP3430ES2 SSI target CM_IDLEST bit is at a different shift
- * from the CM_{I,F}CLKEN bit. Pass back the correct info via
- * @idlest_reg and @idlest_bit. No return value.
- */
-static void omap3430es2_clk_ssi_find_idlest(struct clk_hw_omap *clk,
- void __iomem **idlest_reg,
- u8 *idlest_bit,
- u8 *idlest_val)
-{
- u32 r;
-
- r = (((__force u32)clk->enable_reg & ~0xf0) | 0x20);
- *idlest_reg = (__force void __iomem *)r;
- *idlest_bit = OMAP3430ES2_ST_SSI_IDLE_SHIFT;
- *idlest_val = OMAP34XX_CM_IDLEST_VAL;
-}
-const struct clk_hw_omap_ops clkhwops_omap3430es2_ssi_wait = {
- .find_idlest = omap3430es2_clk_ssi_find_idlest,
- .find_companion = omap2_clk_dflt_find_companion,
-};
-
-const struct clk_hw_omap_ops clkhwops_omap3430es2_iclk_ssi_wait = {
- .allow_idle = omap2_clkt_iclk_allow_idle,
- .deny_idle = omap2_clkt_iclk_deny_idle,
- .find_idlest = omap3430es2_clk_ssi_find_idlest,
- .find_companion = omap2_clk_dflt_find_companion,
-};
-
-/**
- * omap3430es2_clk_dss_usbhost_find_idlest - CM_IDLEST info for DSS, USBHOST
- * @clk: struct clk * being enabled
- * @idlest_reg: void __iomem ** to store CM_IDLEST reg address into
- * @idlest_bit: pointer to a u8 to store the CM_IDLEST bit shift into
- * @idlest_val: pointer to a u8 to store the CM_IDLEST indicator
- *
- * Some OMAP modules on OMAP3 ES2+ chips have both initiator and
- * target IDLEST bits. For our purposes, we are concerned with the
- * target IDLEST bits, which exist at a different bit position than
- * the *CLKEN bit position for these modules (DSS and USBHOST) (The
- * default find_idlest code assumes that they are at the same
- * position.) No return value.
- */
-static void omap3430es2_clk_dss_usbhost_find_idlest(struct clk_hw_omap *clk,
- void __iomem **idlest_reg,
- u8 *idlest_bit,
- u8 *idlest_val)
-{
- u32 r;
-
- r = (((__force u32)clk->enable_reg & ~0xf0) | 0x20);
- *idlest_reg = (__force void __iomem *)r;
- /* USBHOST_IDLE has same shift */
- *idlest_bit = OMAP3430ES2_ST_DSS_IDLE_SHIFT;
- *idlest_val = OMAP34XX_CM_IDLEST_VAL;
-}
-
-const struct clk_hw_omap_ops clkhwops_omap3430es2_dss_usbhost_wait = {
- .find_idlest = omap3430es2_clk_dss_usbhost_find_idlest,
- .find_companion = omap2_clk_dflt_find_companion,
-};
-
-const struct clk_hw_omap_ops clkhwops_omap3430es2_iclk_dss_usbhost_wait = {
- .allow_idle = omap2_clkt_iclk_allow_idle,
- .deny_idle = omap2_clkt_iclk_deny_idle,
- .find_idlest = omap3430es2_clk_dss_usbhost_find_idlest,
- .find_companion = omap2_clk_dflt_find_companion,
-};
-
-/**
- * omap3430es2_clk_hsotgusb_find_idlest - return CM_IDLEST info for HSOTGUSB
- * @clk: struct clk * being enabled
- * @idlest_reg: void __iomem ** to store CM_IDLEST reg address into
- * @idlest_bit: pointer to a u8 to store the CM_IDLEST bit shift into
- * @idlest_val: pointer to a u8 to store the CM_IDLEST indicator
- *
- * The OMAP3430ES2 HSOTGUSB target CM_IDLEST bit is at a different
- * shift from the CM_{I,F}CLKEN bit. Pass back the correct info via
- * @idlest_reg and @idlest_bit. No return value.
- */
-static void omap3430es2_clk_hsotgusb_find_idlest(struct clk_hw_omap *clk,
- void __iomem **idlest_reg,
- u8 *idlest_bit,
- u8 *idlest_val)
-{
- u32 r;
-
- r = (((__force u32)clk->enable_reg & ~0xf0) | 0x20);
- *idlest_reg = (__force void __iomem *)r;
- *idlest_bit = OMAP3430ES2_ST_HSOTGUSB_IDLE_SHIFT;
- *idlest_val = OMAP34XX_CM_IDLEST_VAL;
-}
-
-const struct clk_hw_omap_ops clkhwops_omap3430es2_iclk_hsotgusb_wait = {
- .allow_idle = omap2_clkt_iclk_allow_idle,
- .deny_idle = omap2_clkt_iclk_deny_idle,
- .find_idlest = omap3430es2_clk_hsotgusb_find_idlest,
- .find_companion = omap2_clk_dflt_find_companion,
-};
-
-const struct clk_hw_omap_ops clkhwops_omap3430es2_hsotgusb_wait = {
- .find_idlest = omap3430es2_clk_hsotgusb_find_idlest,
- .find_companion = omap2_clk_dflt_find_companion,
-};
diff --git a/drivers/clk/ti/clk-3xxx.c b/drivers/clk/ti/clk-3xxx.c
index 5489ad8..58879f0 100644
--- a/drivers/clk/ti/clk-3xxx.c
+++ b/drivers/clk/ti/clk-3xxx.c
@@ -28,6 +28,124 @@
*/
#define DPLL5_FREQ_FOR_USBHOST 120000000
+#define OMAP3430ES2_ST_DSS_IDLE_SHIFT 1
+#define OMAP3430ES2_ST_HSOTGUSB_IDLE_SHIFT 5
+#define OMAP3430ES2_ST_SSI_IDLE_SHIFT 8
+
+#define OMAP34XX_CM_IDLEST_VAL 1
+
+/**
+ * omap3430es2_clk_ssi_find_idlest - return CM_IDLEST info for SSI
+ * @clk: struct clk * being enabled
+ * @idlest_reg: void __iomem ** to store CM_IDLEST reg address into
+ * @idlest_bit: pointer to a u8 to store the CM_IDLEST bit shift into
+ * @idlest_val: pointer to a u8 to store the CM_IDLEST indicator
+ *
+ * The OMAP3430ES2 SSI target CM_IDLEST bit is at a different shift
+ * from the CM_{I,F}CLKEN bit. Pass back the correct info via
+ * @idlest_reg and @idlest_bit. No return value.
+ */
+static void omap3430es2_clk_ssi_find_idlest(struct clk_hw_omap *clk,
+ void __iomem **idlest_reg,
+ u8 *idlest_bit,
+ u8 *idlest_val)
+{
+ u32 r;
+
+ r = (((__force u32)clk->enable_reg & ~0xf0) | 0x20);
+ *idlest_reg = (__force void __iomem *)r;
+ *idlest_bit = OMAP3430ES2_ST_SSI_IDLE_SHIFT;
+ *idlest_val = OMAP34XX_CM_IDLEST_VAL;
+}
+
+const struct clk_hw_omap_ops clkhwops_omap3430es2_ssi_wait = {
+ .find_idlest = omap3430es2_clk_ssi_find_idlest,
+ .find_companion = omap2_clk_dflt_find_companion,
+};
+
+const struct clk_hw_omap_ops clkhwops_omap3430es2_iclk_ssi_wait = {
+ .allow_idle = omap2_clkt_iclk_allow_idle,
+ .deny_idle = omap2_clkt_iclk_deny_idle,
+ .find_idlest = omap3430es2_clk_ssi_find_idlest,
+ .find_companion = omap2_clk_dflt_find_companion,
+};
+
+/**
+ * omap3430es2_clk_dss_usbhost_find_idlest - CM_IDLEST info for DSS, USBHOST
+ * @clk: struct clk * being enabled
+ * @idlest_reg: void __iomem ** to store CM_IDLEST reg address into
+ * @idlest_bit: pointer to a u8 to store the CM_IDLEST bit shift into
+ * @idlest_val: pointer to a u8 to store the CM_IDLEST indicator
+ *
+ * Some OMAP modules on OMAP3 ES2+ chips have both initiator and
+ * target IDLEST bits. For our purposes, we are concerned with the
+ * target IDLEST bits, which exist at a different bit position than
+ * the *CLKEN bit position for these modules (DSS and USBHOST) (The
+ * default find_idlest code assumes that they are at the same
+ * position.) No return value.
+ */
+static void omap3430es2_clk_dss_usbhost_find_idlest(struct clk_hw_omap *clk,
+ void __iomem **idlest_reg,
+ u8 *idlest_bit,
+ u8 *idlest_val)
+{
+ u32 r;
+
+ r = (((__force u32)clk->enable_reg & ~0xf0) | 0x20);
+ *idlest_reg = (__force void __iomem *)r;
+ /* USBHOST_IDLE has same shift */
+ *idlest_bit = OMAP3430ES2_ST_DSS_IDLE_SHIFT;
+ *idlest_val = OMAP34XX_CM_IDLEST_VAL;
+}
+
+const struct clk_hw_omap_ops clkhwops_omap3430es2_dss_usbhost_wait = {
+ .find_idlest = omap3430es2_clk_dss_usbhost_find_idlest,
+ .find_companion = omap2_clk_dflt_find_companion,
+};
+
+const struct clk_hw_omap_ops clkhwops_omap3430es2_iclk_dss_usbhost_wait = {
+ .allow_idle = omap2_clkt_iclk_allow_idle,
+ .deny_idle = omap2_clkt_iclk_deny_idle,
+ .find_idlest = omap3430es2_clk_dss_usbhost_find_idlest,
+ .find_companion = omap2_clk_dflt_find_companion,
+};
+
+/**
+ * omap3430es2_clk_hsotgusb_find_idlest - return CM_IDLEST info for HSOTGUSB
+ * @clk: struct clk * being enabled
+ * @idlest_reg: void __iomem ** to store CM_IDLEST reg address into
+ * @idlest_bit: pointer to a u8 to store the CM_IDLEST bit shift into
+ * @idlest_val: pointer to a u8 to store the CM_IDLEST indicator
+ *
+ * The OMAP3430ES2 HSOTGUSB target CM_IDLEST bit is at a different
+ * shift from the CM_{I,F}CLKEN bit. Pass back the correct info via
+ * @idlest_reg and @idlest_bit. No return value.
+ */
+static void omap3430es2_clk_hsotgusb_find_idlest(struct clk_hw_omap *clk,
+ void __iomem **idlest_reg,
+ u8 *idlest_bit,
+ u8 *idlest_val)
+{
+ u32 r;
+
+ r = (((__force u32)clk->enable_reg & ~0xf0) | 0x20);
+ *idlest_reg = (__force void __iomem *)r;
+ *idlest_bit = OMAP3430ES2_ST_HSOTGUSB_IDLE_SHIFT;
+ *idlest_val = OMAP34XX_CM_IDLEST_VAL;
+}
+
+const struct clk_hw_omap_ops clkhwops_omap3430es2_iclk_hsotgusb_wait = {
+ .allow_idle = omap2_clkt_iclk_allow_idle,
+ .deny_idle = omap2_clkt_iclk_deny_idle,
+ .find_idlest = omap3430es2_clk_hsotgusb_find_idlest,
+ .find_companion = omap2_clk_dflt_find_companion,
+};
+
+const struct clk_hw_omap_ops clkhwops_omap3430es2_hsotgusb_wait = {
+ .find_idlest = omap3430es2_clk_hsotgusb_find_idlest,
+ .find_companion = omap2_clk_dflt_find_companion,
+};
+
static struct ti_dt_clk omap3xxx_clks[] = {
DT_CLK(NULL, "apb_pclk", "dummy_apb_pclk"),
DT_CLK(NULL, "omap_32k_fck", "omap_32k_fck"),
diff --git a/drivers/clk/ti/clock.h b/drivers/clk/ti/clock.h
index 83476d1..c6fbd15 100644
--- a/drivers/clk/ti/clock.h
+++ b/drivers/clk/ti/clock.h
@@ -179,6 +179,10 @@ extern const struct clk_hw_omap_ops clkhwops_wait;
extern const struct clk_hw_omap_ops clkhwops_iclk;
extern const struct clk_hw_omap_ops clkhwops_iclk_wait;
extern const struct clk_hw_omap_ops clkhwops_omap2430_i2chs_wait;
+extern const struct clk_hw_omap_ops clkhwops_omap3430es2_dss_usbhost_wait;
+extern const struct clk_hw_omap_ops clkhwops_omap3430es2_iclk_hsotgusb_wait;
+extern const struct clk_hw_omap_ops clkhwops_omap3430es2_iclk_dss_usbhost_wait;
+extern const struct clk_hw_omap_ops clkhwops_omap3430es2_iclk_ssi_wait;
int omap2_clkops_enable_clkdm(struct clk_hw *hw);
void omap2_clkops_disable_clkdm(struct clk_hw *hw);
diff --git a/include/linux/clk/ti.h b/include/linux/clk/ti.h
index 6361f21..813b809 100644
--- a/include/linux/clk/ti.h
+++ b/include/linux/clk/ti.h
@@ -331,12 +331,8 @@ void ti_clk_setup_features(struct ti_clk_features *features);
struct ti_clk_features *ti_clk_get_features(void);
extern const struct clk_hw_omap_ops clkhwops_omap2xxx_dpll;
-extern const struct clk_hw_omap_ops clkhwops_omap3430es2_dss_usbhost_wait;
extern const struct clk_hw_omap_ops clkhwops_am35xx_ipss_module_wait;
extern const struct clk_hw_omap_ops clkhwops_am35xx_ipss_wait;
-extern const struct clk_hw_omap_ops clkhwops_omap3430es2_iclk_ssi_wait;
-extern const struct clk_hw_omap_ops clkhwops_omap3430es2_iclk_dss_usbhost_wait;
-extern const struct clk_hw_omap_ops clkhwops_omap3430es2_iclk_hsotgusb_wait;
#ifdef CONFIG_ATAGS
int omap3430_clk_legacy_init(void);
--
1.7.9.5
^ permalink raw reply related [flat|nested] 120+ messages in thread
* [PATCHv2 21/27] ARM: OMAP4: clock: remove clock44xx.h header
2015-05-11 8:54 ` Tero Kristo
(?)
@ 2015-05-11 8:54 ` Tero Kristo
-1 siblings, 0 replies; 120+ messages in thread
From: Tero Kristo @ 2015-05-11 8:54 UTC (permalink / raw)
To: mturquette, tony, linux-omap, linux-clk, sboyd, paul; +Cc: linux-arm-kernel
This is not needed for anything anymore, so remove it completely.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
---
arch/arm/mach-omap2/clock44xx.h | 20 --------------------
arch/arm/mach-omap2/io.c | 1 -
2 files changed, 21 deletions(-)
delete mode 100644 arch/arm/mach-omap2/clock44xx.h
diff --git a/arch/arm/mach-omap2/clock44xx.h b/arch/arm/mach-omap2/clock44xx.h
deleted file mode 100644
index 287a46f..0000000
--- a/arch/arm/mach-omap2/clock44xx.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/*
- * OMAP4 clock function prototypes and macros
- *
- * Copyright (C) 2009 Texas Instruments, Inc.
- * Copyright (C) 2010 Nokia Corporation
- */
-
-#ifndef __ARCH_ARM_MACH_OMAP2_CLOCK44XX_H
-#define __ARCH_ARM_MACH_OMAP2_CLOCK44XX_H
-
-/*
- * OMAP4430_REGM4XEN_MULT: If the CM_CLKMODE_DPLL_ABE.DPLL_REGM4XEN bit is
- * set, then the DPLL's lock frequency is multiplied by 4 (OMAP4430 TRM
- * vV Section 3.6.3.3.1 "DPLLs Output Clocks Parameters")
- */
-#define OMAP4430_REGM4XEN_MULT 4
-
-int omap4xxx_clk_init(void);
-
-#endif
diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c
index 820dde8..7467856 100644
--- a/arch/arm/mach-omap2/io.c
+++ b/arch/arm/mach-omap2/io.c
@@ -37,7 +37,6 @@
#include "clock.h"
#include "clock2xxx.h"
#include "clock3xxx.h"
-#include "clock44xx.h"
#include "omap-pm.h"
#include "sdrc.h"
#include "control.h"
--
1.7.9.5
^ permalink raw reply related [flat|nested] 120+ messages in thread
* [PATCHv2 21/27] ARM: OMAP4: clock: remove clock44xx.h header
@ 2015-05-11 8:54 ` Tero Kristo
0 siblings, 0 replies; 120+ messages in thread
From: Tero Kristo @ 2015-05-11 8:54 UTC (permalink / raw)
To: mturquette, tony, linux-omap, linux-clk, sboyd, paul; +Cc: linux-arm-kernel
This is not needed for anything anymore, so remove it completely.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
---
arch/arm/mach-omap2/clock44xx.h | 20 --------------------
arch/arm/mach-omap2/io.c | 1 -
2 files changed, 21 deletions(-)
delete mode 100644 arch/arm/mach-omap2/clock44xx.h
diff --git a/arch/arm/mach-omap2/clock44xx.h b/arch/arm/mach-omap2/clock44xx.h
deleted file mode 100644
index 287a46f..0000000
--- a/arch/arm/mach-omap2/clock44xx.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/*
- * OMAP4 clock function prototypes and macros
- *
- * Copyright (C) 2009 Texas Instruments, Inc.
- * Copyright (C) 2010 Nokia Corporation
- */
-
-#ifndef __ARCH_ARM_MACH_OMAP2_CLOCK44XX_H
-#define __ARCH_ARM_MACH_OMAP2_CLOCK44XX_H
-
-/*
- * OMAP4430_REGM4XEN_MULT: If the CM_CLKMODE_DPLL_ABE.DPLL_REGM4XEN bit is
- * set, then the DPLL's lock frequency is multiplied by 4 (OMAP4430 TRM
- * vV Section 3.6.3.3.1 "DPLLs Output Clocks Parameters")
- */
-#define OMAP4430_REGM4XEN_MULT 4
-
-int omap4xxx_clk_init(void);
-
-#endif
diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c
index 820dde8..7467856 100644
--- a/arch/arm/mach-omap2/io.c
+++ b/arch/arm/mach-omap2/io.c
@@ -37,7 +37,6 @@
#include "clock.h"
#include "clock2xxx.h"
#include "clock3xxx.h"
-#include "clock44xx.h"
#include "omap-pm.h"
#include "sdrc.h"
#include "control.h"
--
1.7.9.5
^ permalink raw reply related [flat|nested] 120+ messages in thread
* [PATCHv2 21/27] ARM: OMAP4: clock: remove clock44xx.h header
@ 2015-05-11 8:54 ` Tero Kristo
0 siblings, 0 replies; 120+ messages in thread
From: Tero Kristo @ 2015-05-11 8:54 UTC (permalink / raw)
To: linux-arm-kernel
This is not needed for anything anymore, so remove it completely.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
---
arch/arm/mach-omap2/clock44xx.h | 20 --------------------
arch/arm/mach-omap2/io.c | 1 -
2 files changed, 21 deletions(-)
delete mode 100644 arch/arm/mach-omap2/clock44xx.h
diff --git a/arch/arm/mach-omap2/clock44xx.h b/arch/arm/mach-omap2/clock44xx.h
deleted file mode 100644
index 287a46f..0000000
--- a/arch/arm/mach-omap2/clock44xx.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/*
- * OMAP4 clock function prototypes and macros
- *
- * Copyright (C) 2009 Texas Instruments, Inc.
- * Copyright (C) 2010 Nokia Corporation
- */
-
-#ifndef __ARCH_ARM_MACH_OMAP2_CLOCK44XX_H
-#define __ARCH_ARM_MACH_OMAP2_CLOCK44XX_H
-
-/*
- * OMAP4430_REGM4XEN_MULT: If the CM_CLKMODE_DPLL_ABE.DPLL_REGM4XEN bit is
- * set, then the DPLL's lock frequency is multiplied by 4 (OMAP4430 TRM
- * vV Section 3.6.3.3.1 "DPLLs Output Clocks Parameters")
- */
-#define OMAP4430_REGM4XEN_MULT 4
-
-int omap4xxx_clk_init(void);
-
-#endif
diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c
index 820dde8..7467856 100644
--- a/arch/arm/mach-omap2/io.c
+++ b/arch/arm/mach-omap2/io.c
@@ -37,7 +37,6 @@
#include "clock.h"
#include "clock2xxx.h"
#include "clock3xxx.h"
-#include "clock44xx.h"
#include "omap-pm.h"
#include "sdrc.h"
#include "control.h"
--
1.7.9.5
^ permalink raw reply related [flat|nested] 120+ messages in thread
* [PATCHv2 22/27] clk: ti: am3517: move remaining am3517 clock support code to clock driver
2015-05-11 8:54 ` Tero Kristo
(?)
@ 2015-05-11 8:54 ` Tero Kristo
-1 siblings, 0 replies; 120+ messages in thread
From: Tero Kristo @ 2015-05-11 8:54 UTC (permalink / raw)
To: mturquette, tony, linux-omap, linux-clk, sboyd, paul; +Cc: linux-arm-kernel
With legacy clock support gone, this is no longer needed under platform,
so move it under the clock driver itself. Make some exports be driver
internal definitions at the same time.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
---
arch/arm/mach-omap2/Makefile | 1 -
arch/arm/mach-omap2/clock3517.c | 118 ---------------------------------------
arch/arm/mach-omap2/clock3517.h | 14 -----
drivers/clk/ti/clk-3xxx.c | 94 +++++++++++++++++++++++++++++++
drivers/clk/ti/clock.h | 2 +
include/linux/clk/ti.h | 2 -
6 files changed, 96 insertions(+), 135 deletions(-)
delete mode 100644 arch/arm/mach-omap2/clock3517.c
delete mode 100644 arch/arm/mach-omap2/clock3517.h
diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
index 22d2e48..d424920 100644
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -187,7 +187,6 @@ obj-$(CONFIG_ARCH_OMAP2) += clkt2xxx_virt_prcm_set.o
obj-$(CONFIG_ARCH_OMAP2) += clkt2xxx_dpll.o
obj-$(CONFIG_ARCH_OMAP3) += $(clock-common)
obj-$(CONFIG_ARCH_OMAP3) += clkt34xx_dpll3m2.o
-obj-$(CONFIG_ARCH_OMAP3) += clock3517.o
obj-$(CONFIG_ARCH_OMAP4) += $(clock-common)
obj-$(CONFIG_SOC_AM33XX) += $(clock-common)
obj-$(CONFIG_SOC_OMAP5) += $(clock-common)
diff --git a/arch/arm/mach-omap2/clock3517.c b/arch/arm/mach-omap2/clock3517.c
deleted file mode 100644
index 4d79ae2..0000000
--- a/arch/arm/mach-omap2/clock3517.c
+++ /dev/null
@@ -1,118 +0,0 @@
-/*
- * OMAP3517/3505-specific clock framework functions
- *
- * Copyright (C) 2010 Texas Instruments, Inc.
- * Copyright (C) 2011 Nokia Corporation
- *
- * Ranjith Lohithakshan
- * Paul Walmsley
- *
- * Parts of this code are based on code written by
- * Richard Woodruff, Tony Lindgren, Tuukka Tikkanen, Karthik Dasu,
- * Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#undef DEBUG
-
-#include <linux/kernel.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-
-#include "clock.h"
-#include "clock3517.h"
-#include "cm3xxx.h"
-#include "cm-regbits-34xx.h"
-
-/*
- * In AM35xx IPSS, the {ICK,FCK} enable bits for modules are exported
- * in the same register at a bit offset of 0x8. The EN_ACK for ICK is
- * at an offset of 4 from ICK enable bit.
- */
-#define AM35XX_IPSS_ICK_MASK 0xF
-#define AM35XX_IPSS_ICK_EN_ACK_OFFSET 0x4
-#define AM35XX_IPSS_ICK_FCK_OFFSET 0x8
-#define AM35XX_IPSS_CLK_IDLEST_VAL 0
-
-/**
- * am35xx_clk_find_idlest - return clock ACK info for AM35XX IPSS
- * @clk: struct clk * being enabled
- * @idlest_reg: void __iomem ** to store CM_IDLEST reg address into
- * @idlest_bit: pointer to a u8 to store the CM_IDLEST bit shift into
- * @idlest_val: pointer to a u8 to store the CM_IDLEST indicator
- *
- * The interface clocks on AM35xx IPSS reflects the clock idle status
- * in the enable register itsel at a bit offset of 4 from the enable
- * bit. A value of 1 indicates that clock is enabled.
- */
-static void am35xx_clk_find_idlest(struct clk_hw_omap *clk,
- void __iomem **idlest_reg,
- u8 *idlest_bit,
- u8 *idlest_val)
-{
- *idlest_reg = (__force void __iomem *)(clk->enable_reg);
- *idlest_bit = clk->enable_bit + AM35XX_IPSS_ICK_EN_ACK_OFFSET;
- *idlest_val = AM35XX_IPSS_CLK_IDLEST_VAL;
-}
-
-/**
- * am35xx_clk_find_companion - find companion clock to @clk
- * @clk: struct clk * to find the companion clock of
- * @other_reg: void __iomem ** to return the companion clock CM_*CLKEN va in
- * @other_bit: u8 ** to return the companion clock bit shift in
- *
- * Some clocks don't have companion clocks. For example, modules with
- * only an interface clock (such as HECC) don't have a companion
- * clock. Right now, this code relies on the hardware exporting a bit
- * in the correct companion register that indicates that the
- * nonexistent 'companion clock' is active. Future patches will
- * associate this type of code with per-module data structures to
- * avoid this issue, and remove the casts. No return value.
- */
-static void am35xx_clk_find_companion(struct clk_hw_omap *clk,
- void __iomem **other_reg,
- u8 *other_bit)
-{
- *other_reg = (__force void __iomem *)(clk->enable_reg);
- if (clk->enable_bit & AM35XX_IPSS_ICK_MASK)
- *other_bit = clk->enable_bit + AM35XX_IPSS_ICK_FCK_OFFSET;
- else
- *other_bit = clk->enable_bit - AM35XX_IPSS_ICK_FCK_OFFSET;
-}
-const struct clk_hw_omap_ops clkhwops_am35xx_ipss_module_wait = {
- .find_idlest = am35xx_clk_find_idlest,
- .find_companion = am35xx_clk_find_companion,
-};
-
-/**
- * am35xx_clk_ipss_find_idlest - return CM_IDLEST info for IPSS
- * @clk: struct clk * being enabled
- * @idlest_reg: void __iomem ** to store CM_IDLEST reg address into
- * @idlest_bit: pointer to a u8 to store the CM_IDLEST bit shift into
- * @idlest_val: pointer to a u8 to store the CM_IDLEST indicator
- *
- * The IPSS target CM_IDLEST bit is at a different shift from the
- * CM_{I,F}CLKEN bit. Pass back the correct info via @idlest_reg
- * and @idlest_bit. No return value.
- */
-static void am35xx_clk_ipss_find_idlest(struct clk_hw_omap *clk,
- void __iomem **idlest_reg,
- u8 *idlest_bit,
- u8 *idlest_val)
-{
- u32 r;
-
- r = (((__force u32)clk->enable_reg & ~0xf0) | 0x20);
- *idlest_reg = (__force void __iomem *)r;
- *idlest_bit = AM35XX_ST_IPSS_SHIFT;
- *idlest_val = OMAP34XX_CM_IDLEST_VAL;
-}
-
-const struct clk_hw_omap_ops clkhwops_am35xx_ipss_wait = {
- .allow_idle = omap2_clkt_iclk_allow_idle,
- .deny_idle = omap2_clkt_iclk_deny_idle,
- .find_idlest = am35xx_clk_ipss_find_idlest,
- .find_companion = omap2_clk_dflt_find_companion,
-};
diff --git a/arch/arm/mach-omap2/clock3517.h b/arch/arm/mach-omap2/clock3517.h
deleted file mode 100644
index ca5e5a6..0000000
--- a/arch/arm/mach-omap2/clock3517.h
+++ /dev/null
@@ -1,14 +0,0 @@
-/*
- * OMAP3517/3505 clock function prototypes and macros
- *
- * Copyright (C) 2010 Texas Instruments, Inc.
- * Copyright (C) 2010 Nokia Corporation
- */
-
-#ifndef __ARCH_ARM_MACH_OMAP2_CLOCK3517_H
-#define __ARCH_ARM_MACH_OMAP2_CLOCK3517_H
-
-extern const struct clkops clkops_am35xx_ipss_module_wait;
-extern const struct clkops clkops_am35xx_ipss_wait;
-
-#endif
diff --git a/drivers/clk/ti/clk-3xxx.c b/drivers/clk/ti/clk-3xxx.c
index 58879f0..6e33332 100644
--- a/drivers/clk/ti/clk-3xxx.c
+++ b/drivers/clk/ti/clk-3xxx.c
@@ -34,6 +34,18 @@
#define OMAP34XX_CM_IDLEST_VAL 1
+/*
+ * In AM35xx IPSS, the {ICK,FCK} enable bits for modules are exported
+ * in the same register at a bit offset of 0x8. The EN_ACK for ICK is
+ * at an offset of 4 from ICK enable bit.
+ */
+#define AM35XX_IPSS_ICK_MASK 0xF
+#define AM35XX_IPSS_ICK_EN_ACK_OFFSET 0x4
+#define AM35XX_IPSS_ICK_FCK_OFFSET 0x8
+#define AM35XX_IPSS_CLK_IDLEST_VAL 0
+
+#define AM35XX_ST_IPSS_SHIFT 5
+
/**
* omap3430es2_clk_ssi_find_idlest - return CM_IDLEST info for SSI
* @clk: struct clk * being enabled
@@ -146,6 +158,88 @@ const struct clk_hw_omap_ops clkhwops_omap3430es2_hsotgusb_wait = {
.find_companion = omap2_clk_dflt_find_companion,
};
+/**
+ * am35xx_clk_find_idlest - return clock ACK info for AM35XX IPSS
+ * @clk: struct clk * being enabled
+ * @idlest_reg: void __iomem ** to store CM_IDLEST reg address into
+ * @idlest_bit: pointer to a u8 to store the CM_IDLEST bit shift into
+ * @idlest_val: pointer to a u8 to store the CM_IDLEST indicator
+ *
+ * The interface clocks on AM35xx IPSS reflects the clock idle status
+ * in the enable register itsel at a bit offset of 4 from the enable
+ * bit. A value of 1 indicates that clock is enabled.
+ */
+static void am35xx_clk_find_idlest(struct clk_hw_omap *clk,
+ void __iomem **idlest_reg,
+ u8 *idlest_bit,
+ u8 *idlest_val)
+{
+ *idlest_reg = (__force void __iomem *)(clk->enable_reg);
+ *idlest_bit = clk->enable_bit + AM35XX_IPSS_ICK_EN_ACK_OFFSET;
+ *idlest_val = AM35XX_IPSS_CLK_IDLEST_VAL;
+}
+
+/**
+ * am35xx_clk_find_companion - find companion clock to @clk
+ * @clk: struct clk * to find the companion clock of
+ * @other_reg: void __iomem ** to return the companion clock CM_*CLKEN va in
+ * @other_bit: u8 ** to return the companion clock bit shift in
+ *
+ * Some clocks don't have companion clocks. For example, modules with
+ * only an interface clock (such as HECC) don't have a companion
+ * clock. Right now, this code relies on the hardware exporting a bit
+ * in the correct companion register that indicates that the
+ * nonexistent 'companion clock' is active. Future patches will
+ * associate this type of code with per-module data structures to
+ * avoid this issue, and remove the casts. No return value.
+ */
+static void am35xx_clk_find_companion(struct clk_hw_omap *clk,
+ void __iomem **other_reg,
+ u8 *other_bit)
+{
+ *other_reg = (__force void __iomem *)(clk->enable_reg);
+ if (clk->enable_bit & AM35XX_IPSS_ICK_MASK)
+ *other_bit = clk->enable_bit + AM35XX_IPSS_ICK_FCK_OFFSET;
+ else
+ *other_bit = clk->enable_bit - AM35XX_IPSS_ICK_FCK_OFFSET;
+}
+
+const struct clk_hw_omap_ops clkhwops_am35xx_ipss_module_wait = {
+ .find_idlest = am35xx_clk_find_idlest,
+ .find_companion = am35xx_clk_find_companion,
+};
+
+/**
+ * am35xx_clk_ipss_find_idlest - return CM_IDLEST info for IPSS
+ * @clk: struct clk * being enabled
+ * @idlest_reg: void __iomem ** to store CM_IDLEST reg address into
+ * @idlest_bit: pointer to a u8 to store the CM_IDLEST bit shift into
+ * @idlest_val: pointer to a u8 to store the CM_IDLEST indicator
+ *
+ * The IPSS target CM_IDLEST bit is at a different shift from the
+ * CM_{I,F}CLKEN bit. Pass back the correct info via @idlest_reg
+ * and @idlest_bit. No return value.
+ */
+static void am35xx_clk_ipss_find_idlest(struct clk_hw_omap *clk,
+ void __iomem **idlest_reg,
+ u8 *idlest_bit,
+ u8 *idlest_val)
+{
+ u32 r;
+
+ r = (((__force u32)clk->enable_reg & ~0xf0) | 0x20);
+ *idlest_reg = (__force void __iomem *)r;
+ *idlest_bit = AM35XX_ST_IPSS_SHIFT;
+ *idlest_val = OMAP34XX_CM_IDLEST_VAL;
+}
+
+const struct clk_hw_omap_ops clkhwops_am35xx_ipss_wait = {
+ .allow_idle = omap2_clkt_iclk_allow_idle,
+ .deny_idle = omap2_clkt_iclk_deny_idle,
+ .find_idlest = am35xx_clk_ipss_find_idlest,
+ .find_companion = omap2_clk_dflt_find_companion,
+};
+
static struct ti_dt_clk omap3xxx_clks[] = {
DT_CLK(NULL, "apb_pclk", "dummy_apb_pclk"),
DT_CLK(NULL, "omap_32k_fck", "omap_32k_fck"),
diff --git a/drivers/clk/ti/clock.h b/drivers/clk/ti/clock.h
index c6fbd15..0ca5a36 100644
--- a/drivers/clk/ti/clock.h
+++ b/drivers/clk/ti/clock.h
@@ -183,6 +183,8 @@ extern const struct clk_hw_omap_ops clkhwops_omap3430es2_dss_usbhost_wait;
extern const struct clk_hw_omap_ops clkhwops_omap3430es2_iclk_hsotgusb_wait;
extern const struct clk_hw_omap_ops clkhwops_omap3430es2_iclk_dss_usbhost_wait;
extern const struct clk_hw_omap_ops clkhwops_omap3430es2_iclk_ssi_wait;
+extern const struct clk_hw_omap_ops clkhwops_am35xx_ipss_module_wait;
+extern const struct clk_hw_omap_ops clkhwops_am35xx_ipss_wait;
int omap2_clkops_enable_clkdm(struct clk_hw *hw);
void omap2_clkops_disable_clkdm(struct clk_hw *hw);
diff --git a/include/linux/clk/ti.h b/include/linux/clk/ti.h
index 813b809..fc8e9ad 100644
--- a/include/linux/clk/ti.h
+++ b/include/linux/clk/ti.h
@@ -331,8 +331,6 @@ void ti_clk_setup_features(struct ti_clk_features *features);
struct ti_clk_features *ti_clk_get_features(void);
extern const struct clk_hw_omap_ops clkhwops_omap2xxx_dpll;
-extern const struct clk_hw_omap_ops clkhwops_am35xx_ipss_module_wait;
-extern const struct clk_hw_omap_ops clkhwops_am35xx_ipss_wait;
#ifdef CONFIG_ATAGS
int omap3430_clk_legacy_init(void);
--
1.7.9.5
^ permalink raw reply related [flat|nested] 120+ messages in thread
* [PATCHv2 22/27] clk: ti: am3517: move remaining am3517 clock support code to clock driver
@ 2015-05-11 8:54 ` Tero Kristo
0 siblings, 0 replies; 120+ messages in thread
From: Tero Kristo @ 2015-05-11 8:54 UTC (permalink / raw)
To: mturquette, tony, linux-omap, linux-clk, sboyd, paul; +Cc: linux-arm-kernel
With legacy clock support gone, this is no longer needed under platform,
so move it under the clock driver itself. Make some exports be driver
internal definitions at the same time.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
---
arch/arm/mach-omap2/Makefile | 1 -
arch/arm/mach-omap2/clock3517.c | 118 ---------------------------------------
arch/arm/mach-omap2/clock3517.h | 14 -----
drivers/clk/ti/clk-3xxx.c | 94 +++++++++++++++++++++++++++++++
drivers/clk/ti/clock.h | 2 +
include/linux/clk/ti.h | 2 -
6 files changed, 96 insertions(+), 135 deletions(-)
delete mode 100644 arch/arm/mach-omap2/clock3517.c
delete mode 100644 arch/arm/mach-omap2/clock3517.h
diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
index 22d2e48..d424920 100644
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -187,7 +187,6 @@ obj-$(CONFIG_ARCH_OMAP2) += clkt2xxx_virt_prcm_set.o
obj-$(CONFIG_ARCH_OMAP2) += clkt2xxx_dpll.o
obj-$(CONFIG_ARCH_OMAP3) += $(clock-common)
obj-$(CONFIG_ARCH_OMAP3) += clkt34xx_dpll3m2.o
-obj-$(CONFIG_ARCH_OMAP3) += clock3517.o
obj-$(CONFIG_ARCH_OMAP4) += $(clock-common)
obj-$(CONFIG_SOC_AM33XX) += $(clock-common)
obj-$(CONFIG_SOC_OMAP5) += $(clock-common)
diff --git a/arch/arm/mach-omap2/clock3517.c b/arch/arm/mach-omap2/clock3517.c
deleted file mode 100644
index 4d79ae2..0000000
--- a/arch/arm/mach-omap2/clock3517.c
+++ /dev/null
@@ -1,118 +0,0 @@
-/*
- * OMAP3517/3505-specific clock framework functions
- *
- * Copyright (C) 2010 Texas Instruments, Inc.
- * Copyright (C) 2011 Nokia Corporation
- *
- * Ranjith Lohithakshan
- * Paul Walmsley
- *
- * Parts of this code are based on code written by
- * Richard Woodruff, Tony Lindgren, Tuukka Tikkanen, Karthik Dasu,
- * Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#undef DEBUG
-
-#include <linux/kernel.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-
-#include "clock.h"
-#include "clock3517.h"
-#include "cm3xxx.h"
-#include "cm-regbits-34xx.h"
-
-/*
- * In AM35xx IPSS, the {ICK,FCK} enable bits for modules are exported
- * in the same register at a bit offset of 0x8. The EN_ACK for ICK is
- * at an offset of 4 from ICK enable bit.
- */
-#define AM35XX_IPSS_ICK_MASK 0xF
-#define AM35XX_IPSS_ICK_EN_ACK_OFFSET 0x4
-#define AM35XX_IPSS_ICK_FCK_OFFSET 0x8
-#define AM35XX_IPSS_CLK_IDLEST_VAL 0
-
-/**
- * am35xx_clk_find_idlest - return clock ACK info for AM35XX IPSS
- * @clk: struct clk * being enabled
- * @idlest_reg: void __iomem ** to store CM_IDLEST reg address into
- * @idlest_bit: pointer to a u8 to store the CM_IDLEST bit shift into
- * @idlest_val: pointer to a u8 to store the CM_IDLEST indicator
- *
- * The interface clocks on AM35xx IPSS reflects the clock idle status
- * in the enable register itsel at a bit offset of 4 from the enable
- * bit. A value of 1 indicates that clock is enabled.
- */
-static void am35xx_clk_find_idlest(struct clk_hw_omap *clk,
- void __iomem **idlest_reg,
- u8 *idlest_bit,
- u8 *idlest_val)
-{
- *idlest_reg = (__force void __iomem *)(clk->enable_reg);
- *idlest_bit = clk->enable_bit + AM35XX_IPSS_ICK_EN_ACK_OFFSET;
- *idlest_val = AM35XX_IPSS_CLK_IDLEST_VAL;
-}
-
-/**
- * am35xx_clk_find_companion - find companion clock to @clk
- * @clk: struct clk * to find the companion clock of
- * @other_reg: void __iomem ** to return the companion clock CM_*CLKEN va in
- * @other_bit: u8 ** to return the companion clock bit shift in
- *
- * Some clocks don't have companion clocks. For example, modules with
- * only an interface clock (such as HECC) don't have a companion
- * clock. Right now, this code relies on the hardware exporting a bit
- * in the correct companion register that indicates that the
- * nonexistent 'companion clock' is active. Future patches will
- * associate this type of code with per-module data structures to
- * avoid this issue, and remove the casts. No return value.
- */
-static void am35xx_clk_find_companion(struct clk_hw_omap *clk,
- void __iomem **other_reg,
- u8 *other_bit)
-{
- *other_reg = (__force void __iomem *)(clk->enable_reg);
- if (clk->enable_bit & AM35XX_IPSS_ICK_MASK)
- *other_bit = clk->enable_bit + AM35XX_IPSS_ICK_FCK_OFFSET;
- else
- *other_bit = clk->enable_bit - AM35XX_IPSS_ICK_FCK_OFFSET;
-}
-const struct clk_hw_omap_ops clkhwops_am35xx_ipss_module_wait = {
- .find_idlest = am35xx_clk_find_idlest,
- .find_companion = am35xx_clk_find_companion,
-};
-
-/**
- * am35xx_clk_ipss_find_idlest - return CM_IDLEST info for IPSS
- * @clk: struct clk * being enabled
- * @idlest_reg: void __iomem ** to store CM_IDLEST reg address into
- * @idlest_bit: pointer to a u8 to store the CM_IDLEST bit shift into
- * @idlest_val: pointer to a u8 to store the CM_IDLEST indicator
- *
- * The IPSS target CM_IDLEST bit is at a different shift from the
- * CM_{I,F}CLKEN bit. Pass back the correct info via @idlest_reg
- * and @idlest_bit. No return value.
- */
-static void am35xx_clk_ipss_find_idlest(struct clk_hw_omap *clk,
- void __iomem **idlest_reg,
- u8 *idlest_bit,
- u8 *idlest_val)
-{
- u32 r;
-
- r = (((__force u32)clk->enable_reg & ~0xf0) | 0x20);
- *idlest_reg = (__force void __iomem *)r;
- *idlest_bit = AM35XX_ST_IPSS_SHIFT;
- *idlest_val = OMAP34XX_CM_IDLEST_VAL;
-}
-
-const struct clk_hw_omap_ops clkhwops_am35xx_ipss_wait = {
- .allow_idle = omap2_clkt_iclk_allow_idle,
- .deny_idle = omap2_clkt_iclk_deny_idle,
- .find_idlest = am35xx_clk_ipss_find_idlest,
- .find_companion = omap2_clk_dflt_find_companion,
-};
diff --git a/arch/arm/mach-omap2/clock3517.h b/arch/arm/mach-omap2/clock3517.h
deleted file mode 100644
index ca5e5a6..0000000
--- a/arch/arm/mach-omap2/clock3517.h
+++ /dev/null
@@ -1,14 +0,0 @@
-/*
- * OMAP3517/3505 clock function prototypes and macros
- *
- * Copyright (C) 2010 Texas Instruments, Inc.
- * Copyright (C) 2010 Nokia Corporation
- */
-
-#ifndef __ARCH_ARM_MACH_OMAP2_CLOCK3517_H
-#define __ARCH_ARM_MACH_OMAP2_CLOCK3517_H
-
-extern const struct clkops clkops_am35xx_ipss_module_wait;
-extern const struct clkops clkops_am35xx_ipss_wait;
-
-#endif
diff --git a/drivers/clk/ti/clk-3xxx.c b/drivers/clk/ti/clk-3xxx.c
index 58879f0..6e33332 100644
--- a/drivers/clk/ti/clk-3xxx.c
+++ b/drivers/clk/ti/clk-3xxx.c
@@ -34,6 +34,18 @@
#define OMAP34XX_CM_IDLEST_VAL 1
+/*
+ * In AM35xx IPSS, the {ICK,FCK} enable bits for modules are exported
+ * in the same register at a bit offset of 0x8. The EN_ACK for ICK is
+ * at an offset of 4 from ICK enable bit.
+ */
+#define AM35XX_IPSS_ICK_MASK 0xF
+#define AM35XX_IPSS_ICK_EN_ACK_OFFSET 0x4
+#define AM35XX_IPSS_ICK_FCK_OFFSET 0x8
+#define AM35XX_IPSS_CLK_IDLEST_VAL 0
+
+#define AM35XX_ST_IPSS_SHIFT 5
+
/**
* omap3430es2_clk_ssi_find_idlest - return CM_IDLEST info for SSI
* @clk: struct clk * being enabled
@@ -146,6 +158,88 @@ const struct clk_hw_omap_ops clkhwops_omap3430es2_hsotgusb_wait = {
.find_companion = omap2_clk_dflt_find_companion,
};
+/**
+ * am35xx_clk_find_idlest - return clock ACK info for AM35XX IPSS
+ * @clk: struct clk * being enabled
+ * @idlest_reg: void __iomem ** to store CM_IDLEST reg address into
+ * @idlest_bit: pointer to a u8 to store the CM_IDLEST bit shift into
+ * @idlest_val: pointer to a u8 to store the CM_IDLEST indicator
+ *
+ * The interface clocks on AM35xx IPSS reflects the clock idle status
+ * in the enable register itsel at a bit offset of 4 from the enable
+ * bit. A value of 1 indicates that clock is enabled.
+ */
+static void am35xx_clk_find_idlest(struct clk_hw_omap *clk,
+ void __iomem **idlest_reg,
+ u8 *idlest_bit,
+ u8 *idlest_val)
+{
+ *idlest_reg = (__force void __iomem *)(clk->enable_reg);
+ *idlest_bit = clk->enable_bit + AM35XX_IPSS_ICK_EN_ACK_OFFSET;
+ *idlest_val = AM35XX_IPSS_CLK_IDLEST_VAL;
+}
+
+/**
+ * am35xx_clk_find_companion - find companion clock to @clk
+ * @clk: struct clk * to find the companion clock of
+ * @other_reg: void __iomem ** to return the companion clock CM_*CLKEN va in
+ * @other_bit: u8 ** to return the companion clock bit shift in
+ *
+ * Some clocks don't have companion clocks. For example, modules with
+ * only an interface clock (such as HECC) don't have a companion
+ * clock. Right now, this code relies on the hardware exporting a bit
+ * in the correct companion register that indicates that the
+ * nonexistent 'companion clock' is active. Future patches will
+ * associate this type of code with per-module data structures to
+ * avoid this issue, and remove the casts. No return value.
+ */
+static void am35xx_clk_find_companion(struct clk_hw_omap *clk,
+ void __iomem **other_reg,
+ u8 *other_bit)
+{
+ *other_reg = (__force void __iomem *)(clk->enable_reg);
+ if (clk->enable_bit & AM35XX_IPSS_ICK_MASK)
+ *other_bit = clk->enable_bit + AM35XX_IPSS_ICK_FCK_OFFSET;
+ else
+ *other_bit = clk->enable_bit - AM35XX_IPSS_ICK_FCK_OFFSET;
+}
+
+const struct clk_hw_omap_ops clkhwops_am35xx_ipss_module_wait = {
+ .find_idlest = am35xx_clk_find_idlest,
+ .find_companion = am35xx_clk_find_companion,
+};
+
+/**
+ * am35xx_clk_ipss_find_idlest - return CM_IDLEST info for IPSS
+ * @clk: struct clk * being enabled
+ * @idlest_reg: void __iomem ** to store CM_IDLEST reg address into
+ * @idlest_bit: pointer to a u8 to store the CM_IDLEST bit shift into
+ * @idlest_val: pointer to a u8 to store the CM_IDLEST indicator
+ *
+ * The IPSS target CM_IDLEST bit is at a different shift from the
+ * CM_{I,F}CLKEN bit. Pass back the correct info via @idlest_reg
+ * and @idlest_bit. No return value.
+ */
+static void am35xx_clk_ipss_find_idlest(struct clk_hw_omap *clk,
+ void __iomem **idlest_reg,
+ u8 *idlest_bit,
+ u8 *idlest_val)
+{
+ u32 r;
+
+ r = (((__force u32)clk->enable_reg & ~0xf0) | 0x20);
+ *idlest_reg = (__force void __iomem *)r;
+ *idlest_bit = AM35XX_ST_IPSS_SHIFT;
+ *idlest_val = OMAP34XX_CM_IDLEST_VAL;
+}
+
+const struct clk_hw_omap_ops clkhwops_am35xx_ipss_wait = {
+ .allow_idle = omap2_clkt_iclk_allow_idle,
+ .deny_idle = omap2_clkt_iclk_deny_idle,
+ .find_idlest = am35xx_clk_ipss_find_idlest,
+ .find_companion = omap2_clk_dflt_find_companion,
+};
+
static struct ti_dt_clk omap3xxx_clks[] = {
DT_CLK(NULL, "apb_pclk", "dummy_apb_pclk"),
DT_CLK(NULL, "omap_32k_fck", "omap_32k_fck"),
diff --git a/drivers/clk/ti/clock.h b/drivers/clk/ti/clock.h
index c6fbd15..0ca5a36 100644
--- a/drivers/clk/ti/clock.h
+++ b/drivers/clk/ti/clock.h
@@ -183,6 +183,8 @@ extern const struct clk_hw_omap_ops clkhwops_omap3430es2_dss_usbhost_wait;
extern const struct clk_hw_omap_ops clkhwops_omap3430es2_iclk_hsotgusb_wait;
extern const struct clk_hw_omap_ops clkhwops_omap3430es2_iclk_dss_usbhost_wait;
extern const struct clk_hw_omap_ops clkhwops_omap3430es2_iclk_ssi_wait;
+extern const struct clk_hw_omap_ops clkhwops_am35xx_ipss_module_wait;
+extern const struct clk_hw_omap_ops clkhwops_am35xx_ipss_wait;
int omap2_clkops_enable_clkdm(struct clk_hw *hw);
void omap2_clkops_disable_clkdm(struct clk_hw *hw);
diff --git a/include/linux/clk/ti.h b/include/linux/clk/ti.h
index 813b809..fc8e9ad 100644
--- a/include/linux/clk/ti.h
+++ b/include/linux/clk/ti.h
@@ -331,8 +331,6 @@ void ti_clk_setup_features(struct ti_clk_features *features);
struct ti_clk_features *ti_clk_get_features(void);
extern const struct clk_hw_omap_ops clkhwops_omap2xxx_dpll;
-extern const struct clk_hw_omap_ops clkhwops_am35xx_ipss_module_wait;
-extern const struct clk_hw_omap_ops clkhwops_am35xx_ipss_wait;
#ifdef CONFIG_ATAGS
int omap3430_clk_legacy_init(void);
--
1.7.9.5
^ permalink raw reply related [flat|nested] 120+ messages in thread
* [PATCHv2 22/27] clk: ti: am3517: move remaining am3517 clock support code to clock driver
@ 2015-05-11 8:54 ` Tero Kristo
0 siblings, 0 replies; 120+ messages in thread
From: Tero Kristo @ 2015-05-11 8:54 UTC (permalink / raw)
To: linux-arm-kernel
With legacy clock support gone, this is no longer needed under platform,
so move it under the clock driver itself. Make some exports be driver
internal definitions at the same time.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
---
arch/arm/mach-omap2/Makefile | 1 -
arch/arm/mach-omap2/clock3517.c | 118 ---------------------------------------
arch/arm/mach-omap2/clock3517.h | 14 -----
drivers/clk/ti/clk-3xxx.c | 94 +++++++++++++++++++++++++++++++
drivers/clk/ti/clock.h | 2 +
include/linux/clk/ti.h | 2 -
6 files changed, 96 insertions(+), 135 deletions(-)
delete mode 100644 arch/arm/mach-omap2/clock3517.c
delete mode 100644 arch/arm/mach-omap2/clock3517.h
diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
index 22d2e48..d424920 100644
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -187,7 +187,6 @@ obj-$(CONFIG_ARCH_OMAP2) += clkt2xxx_virt_prcm_set.o
obj-$(CONFIG_ARCH_OMAP2) += clkt2xxx_dpll.o
obj-$(CONFIG_ARCH_OMAP3) += $(clock-common)
obj-$(CONFIG_ARCH_OMAP3) += clkt34xx_dpll3m2.o
-obj-$(CONFIG_ARCH_OMAP3) += clock3517.o
obj-$(CONFIG_ARCH_OMAP4) += $(clock-common)
obj-$(CONFIG_SOC_AM33XX) += $(clock-common)
obj-$(CONFIG_SOC_OMAP5) += $(clock-common)
diff --git a/arch/arm/mach-omap2/clock3517.c b/arch/arm/mach-omap2/clock3517.c
deleted file mode 100644
index 4d79ae2..0000000
--- a/arch/arm/mach-omap2/clock3517.c
+++ /dev/null
@@ -1,118 +0,0 @@
-/*
- * OMAP3517/3505-specific clock framework functions
- *
- * Copyright (C) 2010 Texas Instruments, Inc.
- * Copyright (C) 2011 Nokia Corporation
- *
- * Ranjith Lohithakshan
- * Paul Walmsley
- *
- * Parts of this code are based on code written by
- * Richard Woodruff, Tony Lindgren, Tuukka Tikkanen, Karthik Dasu,
- * Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#undef DEBUG
-
-#include <linux/kernel.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-
-#include "clock.h"
-#include "clock3517.h"
-#include "cm3xxx.h"
-#include "cm-regbits-34xx.h"
-
-/*
- * In AM35xx IPSS, the {ICK,FCK} enable bits for modules are exported
- * in the same register at a bit offset of 0x8. The EN_ACK for ICK is
- * at an offset of 4 from ICK enable bit.
- */
-#define AM35XX_IPSS_ICK_MASK 0xF
-#define AM35XX_IPSS_ICK_EN_ACK_OFFSET 0x4
-#define AM35XX_IPSS_ICK_FCK_OFFSET 0x8
-#define AM35XX_IPSS_CLK_IDLEST_VAL 0
-
-/**
- * am35xx_clk_find_idlest - return clock ACK info for AM35XX IPSS
- * @clk: struct clk * being enabled
- * @idlest_reg: void __iomem ** to store CM_IDLEST reg address into
- * @idlest_bit: pointer to a u8 to store the CM_IDLEST bit shift into
- * @idlest_val: pointer to a u8 to store the CM_IDLEST indicator
- *
- * The interface clocks on AM35xx IPSS reflects the clock idle status
- * in the enable register itsel at a bit offset of 4 from the enable
- * bit. A value of 1 indicates that clock is enabled.
- */
-static void am35xx_clk_find_idlest(struct clk_hw_omap *clk,
- void __iomem **idlest_reg,
- u8 *idlest_bit,
- u8 *idlest_val)
-{
- *idlest_reg = (__force void __iomem *)(clk->enable_reg);
- *idlest_bit = clk->enable_bit + AM35XX_IPSS_ICK_EN_ACK_OFFSET;
- *idlest_val = AM35XX_IPSS_CLK_IDLEST_VAL;
-}
-
-/**
- * am35xx_clk_find_companion - find companion clock to @clk
- * @clk: struct clk * to find the companion clock of
- * @other_reg: void __iomem ** to return the companion clock CM_*CLKEN va in
- * @other_bit: u8 ** to return the companion clock bit shift in
- *
- * Some clocks don't have companion clocks. For example, modules with
- * only an interface clock (such as HECC) don't have a companion
- * clock. Right now, this code relies on the hardware exporting a bit
- * in the correct companion register that indicates that the
- * nonexistent 'companion clock' is active. Future patches will
- * associate this type of code with per-module data structures to
- * avoid this issue, and remove the casts. No return value.
- */
-static void am35xx_clk_find_companion(struct clk_hw_omap *clk,
- void __iomem **other_reg,
- u8 *other_bit)
-{
- *other_reg = (__force void __iomem *)(clk->enable_reg);
- if (clk->enable_bit & AM35XX_IPSS_ICK_MASK)
- *other_bit = clk->enable_bit + AM35XX_IPSS_ICK_FCK_OFFSET;
- else
- *other_bit = clk->enable_bit - AM35XX_IPSS_ICK_FCK_OFFSET;
-}
-const struct clk_hw_omap_ops clkhwops_am35xx_ipss_module_wait = {
- .find_idlest = am35xx_clk_find_idlest,
- .find_companion = am35xx_clk_find_companion,
-};
-
-/**
- * am35xx_clk_ipss_find_idlest - return CM_IDLEST info for IPSS
- * @clk: struct clk * being enabled
- * @idlest_reg: void __iomem ** to store CM_IDLEST reg address into
- * @idlest_bit: pointer to a u8 to store the CM_IDLEST bit shift into
- * @idlest_val: pointer to a u8 to store the CM_IDLEST indicator
- *
- * The IPSS target CM_IDLEST bit is at a different shift from the
- * CM_{I,F}CLKEN bit. Pass back the correct info via @idlest_reg
- * and @idlest_bit. No return value.
- */
-static void am35xx_clk_ipss_find_idlest(struct clk_hw_omap *clk,
- void __iomem **idlest_reg,
- u8 *idlest_bit,
- u8 *idlest_val)
-{
- u32 r;
-
- r = (((__force u32)clk->enable_reg & ~0xf0) | 0x20);
- *idlest_reg = (__force void __iomem *)r;
- *idlest_bit = AM35XX_ST_IPSS_SHIFT;
- *idlest_val = OMAP34XX_CM_IDLEST_VAL;
-}
-
-const struct clk_hw_omap_ops clkhwops_am35xx_ipss_wait = {
- .allow_idle = omap2_clkt_iclk_allow_idle,
- .deny_idle = omap2_clkt_iclk_deny_idle,
- .find_idlest = am35xx_clk_ipss_find_idlest,
- .find_companion = omap2_clk_dflt_find_companion,
-};
diff --git a/arch/arm/mach-omap2/clock3517.h b/arch/arm/mach-omap2/clock3517.h
deleted file mode 100644
index ca5e5a6..0000000
--- a/arch/arm/mach-omap2/clock3517.h
+++ /dev/null
@@ -1,14 +0,0 @@
-/*
- * OMAP3517/3505 clock function prototypes and macros
- *
- * Copyright (C) 2010 Texas Instruments, Inc.
- * Copyright (C) 2010 Nokia Corporation
- */
-
-#ifndef __ARCH_ARM_MACH_OMAP2_CLOCK3517_H
-#define __ARCH_ARM_MACH_OMAP2_CLOCK3517_H
-
-extern const struct clkops clkops_am35xx_ipss_module_wait;
-extern const struct clkops clkops_am35xx_ipss_wait;
-
-#endif
diff --git a/drivers/clk/ti/clk-3xxx.c b/drivers/clk/ti/clk-3xxx.c
index 58879f0..6e33332 100644
--- a/drivers/clk/ti/clk-3xxx.c
+++ b/drivers/clk/ti/clk-3xxx.c
@@ -34,6 +34,18 @@
#define OMAP34XX_CM_IDLEST_VAL 1
+/*
+ * In AM35xx IPSS, the {ICK,FCK} enable bits for modules are exported
+ * in the same register at a bit offset of 0x8. The EN_ACK for ICK is
+ * at an offset of 4 from ICK enable bit.
+ */
+#define AM35XX_IPSS_ICK_MASK 0xF
+#define AM35XX_IPSS_ICK_EN_ACK_OFFSET 0x4
+#define AM35XX_IPSS_ICK_FCK_OFFSET 0x8
+#define AM35XX_IPSS_CLK_IDLEST_VAL 0
+
+#define AM35XX_ST_IPSS_SHIFT 5
+
/**
* omap3430es2_clk_ssi_find_idlest - return CM_IDLEST info for SSI
* @clk: struct clk * being enabled
@@ -146,6 +158,88 @@ const struct clk_hw_omap_ops clkhwops_omap3430es2_hsotgusb_wait = {
.find_companion = omap2_clk_dflt_find_companion,
};
+/**
+ * am35xx_clk_find_idlest - return clock ACK info for AM35XX IPSS
+ * @clk: struct clk * being enabled
+ * @idlest_reg: void __iomem ** to store CM_IDLEST reg address into
+ * @idlest_bit: pointer to a u8 to store the CM_IDLEST bit shift into
+ * @idlest_val: pointer to a u8 to store the CM_IDLEST indicator
+ *
+ * The interface clocks on AM35xx IPSS reflects the clock idle status
+ * in the enable register itsel at a bit offset of 4 from the enable
+ * bit. A value of 1 indicates that clock is enabled.
+ */
+static void am35xx_clk_find_idlest(struct clk_hw_omap *clk,
+ void __iomem **idlest_reg,
+ u8 *idlest_bit,
+ u8 *idlest_val)
+{
+ *idlest_reg = (__force void __iomem *)(clk->enable_reg);
+ *idlest_bit = clk->enable_bit + AM35XX_IPSS_ICK_EN_ACK_OFFSET;
+ *idlest_val = AM35XX_IPSS_CLK_IDLEST_VAL;
+}
+
+/**
+ * am35xx_clk_find_companion - find companion clock to @clk
+ * @clk: struct clk * to find the companion clock of
+ * @other_reg: void __iomem ** to return the companion clock CM_*CLKEN va in
+ * @other_bit: u8 ** to return the companion clock bit shift in
+ *
+ * Some clocks don't have companion clocks. For example, modules with
+ * only an interface clock (such as HECC) don't have a companion
+ * clock. Right now, this code relies on the hardware exporting a bit
+ * in the correct companion register that indicates that the
+ * nonexistent 'companion clock' is active. Future patches will
+ * associate this type of code with per-module data structures to
+ * avoid this issue, and remove the casts. No return value.
+ */
+static void am35xx_clk_find_companion(struct clk_hw_omap *clk,
+ void __iomem **other_reg,
+ u8 *other_bit)
+{
+ *other_reg = (__force void __iomem *)(clk->enable_reg);
+ if (clk->enable_bit & AM35XX_IPSS_ICK_MASK)
+ *other_bit = clk->enable_bit + AM35XX_IPSS_ICK_FCK_OFFSET;
+ else
+ *other_bit = clk->enable_bit - AM35XX_IPSS_ICK_FCK_OFFSET;
+}
+
+const struct clk_hw_omap_ops clkhwops_am35xx_ipss_module_wait = {
+ .find_idlest = am35xx_clk_find_idlest,
+ .find_companion = am35xx_clk_find_companion,
+};
+
+/**
+ * am35xx_clk_ipss_find_idlest - return CM_IDLEST info for IPSS
+ * @clk: struct clk * being enabled
+ * @idlest_reg: void __iomem ** to store CM_IDLEST reg address into
+ * @idlest_bit: pointer to a u8 to store the CM_IDLEST bit shift into
+ * @idlest_val: pointer to a u8 to store the CM_IDLEST indicator
+ *
+ * The IPSS target CM_IDLEST bit is at a different shift from the
+ * CM_{I,F}CLKEN bit. Pass back the correct info via @idlest_reg
+ * and @idlest_bit. No return value.
+ */
+static void am35xx_clk_ipss_find_idlest(struct clk_hw_omap *clk,
+ void __iomem **idlest_reg,
+ u8 *idlest_bit,
+ u8 *idlest_val)
+{
+ u32 r;
+
+ r = (((__force u32)clk->enable_reg & ~0xf0) | 0x20);
+ *idlest_reg = (__force void __iomem *)r;
+ *idlest_bit = AM35XX_ST_IPSS_SHIFT;
+ *idlest_val = OMAP34XX_CM_IDLEST_VAL;
+}
+
+const struct clk_hw_omap_ops clkhwops_am35xx_ipss_wait = {
+ .allow_idle = omap2_clkt_iclk_allow_idle,
+ .deny_idle = omap2_clkt_iclk_deny_idle,
+ .find_idlest = am35xx_clk_ipss_find_idlest,
+ .find_companion = omap2_clk_dflt_find_companion,
+};
+
static struct ti_dt_clk omap3xxx_clks[] = {
DT_CLK(NULL, "apb_pclk", "dummy_apb_pclk"),
DT_CLK(NULL, "omap_32k_fck", "omap_32k_fck"),
diff --git a/drivers/clk/ti/clock.h b/drivers/clk/ti/clock.h
index c6fbd15..0ca5a36 100644
--- a/drivers/clk/ti/clock.h
+++ b/drivers/clk/ti/clock.h
@@ -183,6 +183,8 @@ extern const struct clk_hw_omap_ops clkhwops_omap3430es2_dss_usbhost_wait;
extern const struct clk_hw_omap_ops clkhwops_omap3430es2_iclk_hsotgusb_wait;
extern const struct clk_hw_omap_ops clkhwops_omap3430es2_iclk_dss_usbhost_wait;
extern const struct clk_hw_omap_ops clkhwops_omap3430es2_iclk_ssi_wait;
+extern const struct clk_hw_omap_ops clkhwops_am35xx_ipss_module_wait;
+extern const struct clk_hw_omap_ops clkhwops_am35xx_ipss_wait;
int omap2_clkops_enable_clkdm(struct clk_hw *hw);
void omap2_clkops_disable_clkdm(struct clk_hw *hw);
diff --git a/include/linux/clk/ti.h b/include/linux/clk/ti.h
index 813b809..fc8e9ad 100644
--- a/include/linux/clk/ti.h
+++ b/include/linux/clk/ti.h
@@ -331,8 +331,6 @@ void ti_clk_setup_features(struct ti_clk_features *features);
struct ti_clk_features *ti_clk_get_features(void);
extern const struct clk_hw_omap_ops clkhwops_omap2xxx_dpll;
-extern const struct clk_hw_omap_ops clkhwops_am35xx_ipss_module_wait;
-extern const struct clk_hw_omap_ops clkhwops_am35xx_ipss_wait;
#ifdef CONFIG_ATAGS
int omap3430_clk_legacy_init(void);
--
1.7.9.5
^ permalink raw reply related [flat|nested] 120+ messages in thread
* [PATCHv2 23/27] clk: ti: move some public definitions to private header
2015-05-11 8:54 ` Tero Kristo
(?)
@ 2015-05-11 8:54 ` Tero Kristo
-1 siblings, 0 replies; 120+ messages in thread
From: Tero Kristo @ 2015-05-11 8:54 UTC (permalink / raw)
To: mturquette, tony, linux-omap, linux-clk, sboyd, paul; +Cc: linux-arm-kernel
Several exported TI clock driver features are no longer needed outside
the clock driver itself, thus move all of these to the driver private
header file. Also, update some of the driver files to actually include
this header.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
---
drivers/clk/ti/apll.c | 2 ++
drivers/clk/ti/autoidle.c | 2 ++
drivers/clk/ti/clk-43xx.c | 2 ++
drivers/clk/ti/clk-44xx.c | 2 ++
drivers/clk/ti/clk-54xx.c | 2 ++
drivers/clk/ti/clk-7xx.c | 3 ++-
drivers/clk/ti/clock.h | 47 +++++++++++++++++++++++++++++++++++++++++++++
include/linux/clk/ti.h | 45 -------------------------------------------
8 files changed, 59 insertions(+), 46 deletions(-)
diff --git a/drivers/clk/ti/apll.c b/drivers/clk/ti/apll.c
index 49baf38..594b759 100644
--- a/drivers/clk/ti/apll.c
+++ b/drivers/clk/ti/apll.c
@@ -27,6 +27,8 @@
#include <linux/clk/ti.h>
#include <linux/delay.h>
+#include "clock.h"
+
#define APLL_FORCE_LOCK 0x1
#define APLL_AUTO_IDLE 0x2
#define MAX_APLL_WAIT_TRIES 1000000
diff --git a/drivers/clk/ti/autoidle.c b/drivers/clk/ti/autoidle.c
index 3dbcc36..94f0dcd 100644
--- a/drivers/clk/ti/autoidle.c
+++ b/drivers/clk/ti/autoidle.c
@@ -22,6 +22,8 @@
#include <linux/of_address.h>
#include <linux/clk/ti.h>
+#include "clock.h"
+
struct clk_ti_autoidle {
void __iomem *reg;
u8 shift;
diff --git a/drivers/clk/ti/clk-43xx.c b/drivers/clk/ti/clk-43xx.c
index 3795fce..8943167 100644
--- a/drivers/clk/ti/clk-43xx.c
+++ b/drivers/clk/ti/clk-43xx.c
@@ -19,6 +19,8 @@
#include <linux/clk-provider.h>
#include <linux/clk/ti.h>
+#include "clock.h"
+
static struct ti_dt_clk am43xx_clks[] = {
DT_CLK(NULL, "clk_32768_ck", "clk_32768_ck"),
DT_CLK(NULL, "clk_rc32k_ck", "clk_rc32k_ck"),
diff --git a/drivers/clk/ti/clk-44xx.c b/drivers/clk/ti/clk-44xx.c
index 581db77..7a8b51b 100644
--- a/drivers/clk/ti/clk-44xx.c
+++ b/drivers/clk/ti/clk-44xx.c
@@ -16,6 +16,8 @@
#include <linux/clkdev.h>
#include <linux/clk/ti.h>
+#include "clock.h"
+
/*
* OMAP4 ABE DPLL default frequency. In OMAP4460 TRM version V, section
* "3.6.3.2.3 CM1_ABE Clock Generator" states that the "DPLL_ABE_X2_CLK
diff --git a/drivers/clk/ti/clk-54xx.c b/drivers/clk/ti/clk-54xx.c
index 96c69a3..59ce2fa 100644
--- a/drivers/clk/ti/clk-54xx.c
+++ b/drivers/clk/ti/clk-54xx.c
@@ -17,6 +17,8 @@
#include <linux/io.h>
#include <linux/clk/ti.h>
+#include "clock.h"
+
#define OMAP5_DPLL_ABE_DEFFREQ 98304000
/*
diff --git a/drivers/clk/ti/clk-7xx.c b/drivers/clk/ti/clk-7xx.c
index 5d2217a..8b82721 100644
--- a/drivers/clk/ti/clk-7xx.c
+++ b/drivers/clk/ti/clk-7xx.c
@@ -16,11 +16,12 @@
#include <linux/clkdev.h>
#include <linux/clk/ti.h>
+#include "clock.h"
+
#define DRA7_DPLL_ABE_DEFFREQ 180633600
#define DRA7_DPLL_GMAC_DEFFREQ 1000000000
#define DRA7_DPLL_USB_DEFFREQ 960000000
-
static struct ti_dt_clk dra7xx_clks[] = {
DT_CLK(NULL, "atl_clkin0_ck", "atl_clkin0_ck"),
DT_CLK(NULL, "atl_clkin1_ck", "atl_clkin1_ck"),
diff --git a/drivers/clk/ti/clock.h b/drivers/clk/ti/clock.h
index 0ca5a36..3c43125 100644
--- a/drivers/clk/ti/clock.h
+++ b/drivers/clk/ti/clock.h
@@ -154,6 +154,35 @@ struct ti_clk_dpll {
u8 recal_st_bit;
};
+/* Composite clock component types */
+enum {
+ CLK_COMPONENT_TYPE_GATE = 0,
+ CLK_COMPONENT_TYPE_DIVIDER,
+ CLK_COMPONENT_TYPE_MUX,
+ CLK_COMPONENT_TYPE_MAX,
+};
+
+/**
+ * struct ti_dt_clk - OMAP DT clock alias declarations
+ * @lk: clock lookup definition
+ * @node_name: clock DT node to map to
+ */
+struct ti_dt_clk {
+ struct clk_lookup lk;
+ char *node_name;
+};
+
+#define DT_CLK(dev, con, name) \
+ { \
+ .lk = { \
+ .dev_id = dev, \
+ .con_id = con, \
+ }, \
+ .node_name = name, \
+ }
+
+typedef void (*ti_of_clk_init_cb_t)(struct clk_hw *, struct device_node *);
+
struct clk *ti_clk_register_gate(struct ti_clk *setup);
struct clk *ti_clk_register_interface(struct ti_clk *setup);
struct clk *ti_clk_register_mux(struct ti_clk *setup);
@@ -169,6 +198,12 @@ void ti_clk_patch_legacy_clks(struct ti_clk **patch);
struct clk *ti_clk_register_clk(struct ti_clk *setup);
int ti_clk_register_legacy_clks(struct ti_clk_alias *clks);
+void __iomem *ti_clk_get_reg_addr(struct device_node *node, int index);
+void ti_dt_clocks_register(struct ti_dt_clk *oclks);
+int ti_clk_retry_init(struct device_node *node, struct clk_hw *hw,
+ ti_of_clk_init_cb_t func);
+int ti_clk_add_component(struct device_node *node, struct clk_hw *hw, int type);
+
void omap2_init_clk_hw_omap_clocks(struct clk *clk);
int of_ti_clk_autoidle_setup(struct device_node *node);
void omap2_clk_enable_init_clocks(const char **clk_names, u8 num_clocks);
@@ -186,12 +221,24 @@ extern const struct clk_hw_omap_ops clkhwops_omap3430es2_iclk_ssi_wait;
extern const struct clk_hw_omap_ops clkhwops_am35xx_ipss_module_wait;
extern const struct clk_hw_omap_ops clkhwops_am35xx_ipss_wait;
+extern const struct clk_ops ti_clk_divider_ops;
+extern const struct clk_ops ti_clk_mux_ops;
+
int omap2_clkops_enable_clkdm(struct clk_hw *hw);
void omap2_clkops_disable_clkdm(struct clk_hw *hw);
int omap2_dflt_clk_enable(struct clk_hw *hw);
void omap2_dflt_clk_disable(struct clk_hw *hw);
int omap2_dflt_clk_is_enabled(struct clk_hw *hw);
+void omap2_clk_dflt_find_companion(struct clk_hw_omap *clk,
+ void __iomem **other_reg,
+ u8 *other_bit);
+void omap2_clk_dflt_find_idlest(struct clk_hw_omap *clk,
+ void __iomem **idlest_reg,
+ u8 *idlest_bit, u8 *idlest_val);
+
+void omap2_clkt_iclk_allow_idle(struct clk_hw_omap *clk);
+void omap2_clkt_iclk_deny_idle(struct clk_hw_omap *clk);
u8 omap2_init_dpll_parent(struct clk_hw *hw);
int omap3_noncore_dpll_enable(struct clk_hw *hw);
diff --git a/include/linux/clk/ti.h b/include/linux/clk/ti.h
index fc8e9ad..53fe38f 100644
--- a/include/linux/clk/ti.h
+++ b/include/linux/clk/ti.h
@@ -188,33 +188,6 @@ struct clk_hw_omap {
/* DPLL Type and DCO Selection Flags */
#define DPLL_J_TYPE 0x1
-/* Composite clock component types */
-enum {
- CLK_COMPONENT_TYPE_GATE = 0,
- CLK_COMPONENT_TYPE_DIVIDER,
- CLK_COMPONENT_TYPE_MUX,
- CLK_COMPONENT_TYPE_MAX,
-};
-
-/**
- * struct ti_dt_clk - OMAP DT clock alias declarations
- * @lk: clock lookup definition
- * @node_name: clock DT node to map to
- */
-struct ti_dt_clk {
- struct clk_lookup lk;
- char *node_name;
-};
-
-#define DT_CLK(dev, con, name) \
- { \
- .lk = { \
- .dev_id = dev, \
- .con_id = con, \
- }, \
- .node_name = name, \
- }
-
/* Static memmap indices */
enum {
TI_CLKM_CM = 0,
@@ -225,8 +198,6 @@ enum {
CLK_MAX_MEMMAPS
};
-typedef void (*ti_of_clk_init_cb_t)(struct clk_hw *, struct device_node *);
-
/**
* struct clk_omap_reg - OMAP register declaration
* @offset: offset from the master IP module base address
@@ -266,9 +237,6 @@ struct ti_clk_ll_ops {
extern struct ti_clk_ll_ops *ti_clk_ll_ops;
-extern const struct clk_ops ti_clk_divider_ops;
-extern const struct clk_ops ti_clk_mux_ops;
-
#define to_clk_hw_omap(_hw) container_of(_hw, struct clk_hw_omap, hw)
void omap2_init_clk_clkdm(struct clk_hw *clk);
@@ -276,14 +244,6 @@ int omap2_clk_disable_autoidle_all(void);
int omap2_clk_enable_autoidle_all(void);
int omap2_clk_allow_idle(struct clk *clk);
int omap2_clk_deny_idle(struct clk *clk);
-void omap2_clkt_iclk_allow_idle(struct clk_hw_omap *clk);
-void omap2_clkt_iclk_deny_idle(struct clk_hw_omap *clk);
-void omap2_clk_dflt_find_companion(struct clk_hw_omap *clk,
- void __iomem **other_reg,
- u8 *other_bit);
-void omap2_clk_dflt_find_idlest(struct clk_hw_omap *clk,
- void __iomem **idlest_reg,
- u8 *idlest_bit, u8 *idlest_val);
unsigned long omap2_dpllcore_recalc(struct clk_hw *hw,
unsigned long parent_rate);
int omap2_reprogram_dpllcore(struct clk_hw *clk, unsigned long rate,
@@ -292,14 +252,9 @@ void omap2xxx_clkt_dpllcore_init(struct clk_hw *hw);
void omap2xxx_clkt_vps_init(void);
unsigned long omap2_get_dpll_rate(struct clk_hw_omap *clk);
-void __iomem *ti_clk_get_reg_addr(struct device_node *node, int index);
-void ti_dt_clocks_register(struct ti_dt_clk *oclks);
void ti_dt_clk_init_provider(struct device_node *np, int index);
void ti_dt_clk_init_retry_clks(void);
void ti_dt_clockdomains_setup(void);
-int ti_clk_retry_init(struct device_node *node, struct clk_hw *hw,
- ti_of_clk_init_cb_t func);
-int ti_clk_add_component(struct device_node *node, struct clk_hw *hw, int type);
int omap3430_dt_clk_init(void);
int omap3630_dt_clk_init(void);
--
1.7.9.5
^ permalink raw reply related [flat|nested] 120+ messages in thread
* [PATCHv2 23/27] clk: ti: move some public definitions to private header
@ 2015-05-11 8:54 ` Tero Kristo
0 siblings, 0 replies; 120+ messages in thread
From: Tero Kristo @ 2015-05-11 8:54 UTC (permalink / raw)
To: mturquette, tony, linux-omap, linux-clk, sboyd, paul; +Cc: linux-arm-kernel
Several exported TI clock driver features are no longer needed outside
the clock driver itself, thus move all of these to the driver private
header file. Also, update some of the driver files to actually include
this header.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
---
drivers/clk/ti/apll.c | 2 ++
drivers/clk/ti/autoidle.c | 2 ++
drivers/clk/ti/clk-43xx.c | 2 ++
drivers/clk/ti/clk-44xx.c | 2 ++
drivers/clk/ti/clk-54xx.c | 2 ++
drivers/clk/ti/clk-7xx.c | 3 ++-
drivers/clk/ti/clock.h | 47 +++++++++++++++++++++++++++++++++++++++++++++
include/linux/clk/ti.h | 45 -------------------------------------------
8 files changed, 59 insertions(+), 46 deletions(-)
diff --git a/drivers/clk/ti/apll.c b/drivers/clk/ti/apll.c
index 49baf38..594b759 100644
--- a/drivers/clk/ti/apll.c
+++ b/drivers/clk/ti/apll.c
@@ -27,6 +27,8 @@
#include <linux/clk/ti.h>
#include <linux/delay.h>
+#include "clock.h"
+
#define APLL_FORCE_LOCK 0x1
#define APLL_AUTO_IDLE 0x2
#define MAX_APLL_WAIT_TRIES 1000000
diff --git a/drivers/clk/ti/autoidle.c b/drivers/clk/ti/autoidle.c
index 3dbcc36..94f0dcd 100644
--- a/drivers/clk/ti/autoidle.c
+++ b/drivers/clk/ti/autoidle.c
@@ -22,6 +22,8 @@
#include <linux/of_address.h>
#include <linux/clk/ti.h>
+#include "clock.h"
+
struct clk_ti_autoidle {
void __iomem *reg;
u8 shift;
diff --git a/drivers/clk/ti/clk-43xx.c b/drivers/clk/ti/clk-43xx.c
index 3795fce..8943167 100644
--- a/drivers/clk/ti/clk-43xx.c
+++ b/drivers/clk/ti/clk-43xx.c
@@ -19,6 +19,8 @@
#include <linux/clk-provider.h>
#include <linux/clk/ti.h>
+#include "clock.h"
+
static struct ti_dt_clk am43xx_clks[] = {
DT_CLK(NULL, "clk_32768_ck", "clk_32768_ck"),
DT_CLK(NULL, "clk_rc32k_ck", "clk_rc32k_ck"),
diff --git a/drivers/clk/ti/clk-44xx.c b/drivers/clk/ti/clk-44xx.c
index 581db77..7a8b51b 100644
--- a/drivers/clk/ti/clk-44xx.c
+++ b/drivers/clk/ti/clk-44xx.c
@@ -16,6 +16,8 @@
#include <linux/clkdev.h>
#include <linux/clk/ti.h>
+#include "clock.h"
+
/*
* OMAP4 ABE DPLL default frequency. In OMAP4460 TRM version V, section
* "3.6.3.2.3 CM1_ABE Clock Generator" states that the "DPLL_ABE_X2_CLK
diff --git a/drivers/clk/ti/clk-54xx.c b/drivers/clk/ti/clk-54xx.c
index 96c69a3..59ce2fa 100644
--- a/drivers/clk/ti/clk-54xx.c
+++ b/drivers/clk/ti/clk-54xx.c
@@ -17,6 +17,8 @@
#include <linux/io.h>
#include <linux/clk/ti.h>
+#include "clock.h"
+
#define OMAP5_DPLL_ABE_DEFFREQ 98304000
/*
diff --git a/drivers/clk/ti/clk-7xx.c b/drivers/clk/ti/clk-7xx.c
index 5d2217a..8b82721 100644
--- a/drivers/clk/ti/clk-7xx.c
+++ b/drivers/clk/ti/clk-7xx.c
@@ -16,11 +16,12 @@
#include <linux/clkdev.h>
#include <linux/clk/ti.h>
+#include "clock.h"
+
#define DRA7_DPLL_ABE_DEFFREQ 180633600
#define DRA7_DPLL_GMAC_DEFFREQ 1000000000
#define DRA7_DPLL_USB_DEFFREQ 960000000
-
static struct ti_dt_clk dra7xx_clks[] = {
DT_CLK(NULL, "atl_clkin0_ck", "atl_clkin0_ck"),
DT_CLK(NULL, "atl_clkin1_ck", "atl_clkin1_ck"),
diff --git a/drivers/clk/ti/clock.h b/drivers/clk/ti/clock.h
index 0ca5a36..3c43125 100644
--- a/drivers/clk/ti/clock.h
+++ b/drivers/clk/ti/clock.h
@@ -154,6 +154,35 @@ struct ti_clk_dpll {
u8 recal_st_bit;
};
+/* Composite clock component types */
+enum {
+ CLK_COMPONENT_TYPE_GATE = 0,
+ CLK_COMPONENT_TYPE_DIVIDER,
+ CLK_COMPONENT_TYPE_MUX,
+ CLK_COMPONENT_TYPE_MAX,
+};
+
+/**
+ * struct ti_dt_clk - OMAP DT clock alias declarations
+ * @lk: clock lookup definition
+ * @node_name: clock DT node to map to
+ */
+struct ti_dt_clk {
+ struct clk_lookup lk;
+ char *node_name;
+};
+
+#define DT_CLK(dev, con, name) \
+ { \
+ .lk = { \
+ .dev_id = dev, \
+ .con_id = con, \
+ }, \
+ .node_name = name, \
+ }
+
+typedef void (*ti_of_clk_init_cb_t)(struct clk_hw *, struct device_node *);
+
struct clk *ti_clk_register_gate(struct ti_clk *setup);
struct clk *ti_clk_register_interface(struct ti_clk *setup);
struct clk *ti_clk_register_mux(struct ti_clk *setup);
@@ -169,6 +198,12 @@ void ti_clk_patch_legacy_clks(struct ti_clk **patch);
struct clk *ti_clk_register_clk(struct ti_clk *setup);
int ti_clk_register_legacy_clks(struct ti_clk_alias *clks);
+void __iomem *ti_clk_get_reg_addr(struct device_node *node, int index);
+void ti_dt_clocks_register(struct ti_dt_clk *oclks);
+int ti_clk_retry_init(struct device_node *node, struct clk_hw *hw,
+ ti_of_clk_init_cb_t func);
+int ti_clk_add_component(struct device_node *node, struct clk_hw *hw, int type);
+
void omap2_init_clk_hw_omap_clocks(struct clk *clk);
int of_ti_clk_autoidle_setup(struct device_node *node);
void omap2_clk_enable_init_clocks(const char **clk_names, u8 num_clocks);
@@ -186,12 +221,24 @@ extern const struct clk_hw_omap_ops clkhwops_omap3430es2_iclk_ssi_wait;
extern const struct clk_hw_omap_ops clkhwops_am35xx_ipss_module_wait;
extern const struct clk_hw_omap_ops clkhwops_am35xx_ipss_wait;
+extern const struct clk_ops ti_clk_divider_ops;
+extern const struct clk_ops ti_clk_mux_ops;
+
int omap2_clkops_enable_clkdm(struct clk_hw *hw);
void omap2_clkops_disable_clkdm(struct clk_hw *hw);
int omap2_dflt_clk_enable(struct clk_hw *hw);
void omap2_dflt_clk_disable(struct clk_hw *hw);
int omap2_dflt_clk_is_enabled(struct clk_hw *hw);
+void omap2_clk_dflt_find_companion(struct clk_hw_omap *clk,
+ void __iomem **other_reg,
+ u8 *other_bit);
+void omap2_clk_dflt_find_idlest(struct clk_hw_omap *clk,
+ void __iomem **idlest_reg,
+ u8 *idlest_bit, u8 *idlest_val);
+
+void omap2_clkt_iclk_allow_idle(struct clk_hw_omap *clk);
+void omap2_clkt_iclk_deny_idle(struct clk_hw_omap *clk);
u8 omap2_init_dpll_parent(struct clk_hw *hw);
int omap3_noncore_dpll_enable(struct clk_hw *hw);
diff --git a/include/linux/clk/ti.h b/include/linux/clk/ti.h
index fc8e9ad..53fe38f 100644
--- a/include/linux/clk/ti.h
+++ b/include/linux/clk/ti.h
@@ -188,33 +188,6 @@ struct clk_hw_omap {
/* DPLL Type and DCO Selection Flags */
#define DPLL_J_TYPE 0x1
-/* Composite clock component types */
-enum {
- CLK_COMPONENT_TYPE_GATE = 0,
- CLK_COMPONENT_TYPE_DIVIDER,
- CLK_COMPONENT_TYPE_MUX,
- CLK_COMPONENT_TYPE_MAX,
-};
-
-/**
- * struct ti_dt_clk - OMAP DT clock alias declarations
- * @lk: clock lookup definition
- * @node_name: clock DT node to map to
- */
-struct ti_dt_clk {
- struct clk_lookup lk;
- char *node_name;
-};
-
-#define DT_CLK(dev, con, name) \
- { \
- .lk = { \
- .dev_id = dev, \
- .con_id = con, \
- }, \
- .node_name = name, \
- }
-
/* Static memmap indices */
enum {
TI_CLKM_CM = 0,
@@ -225,8 +198,6 @@ enum {
CLK_MAX_MEMMAPS
};
-typedef void (*ti_of_clk_init_cb_t)(struct clk_hw *, struct device_node *);
-
/**
* struct clk_omap_reg - OMAP register declaration
* @offset: offset from the master IP module base address
@@ -266,9 +237,6 @@ struct ti_clk_ll_ops {
extern struct ti_clk_ll_ops *ti_clk_ll_ops;
-extern const struct clk_ops ti_clk_divider_ops;
-extern const struct clk_ops ti_clk_mux_ops;
-
#define to_clk_hw_omap(_hw) container_of(_hw, struct clk_hw_omap, hw)
void omap2_init_clk_clkdm(struct clk_hw *clk);
@@ -276,14 +244,6 @@ int omap2_clk_disable_autoidle_all(void);
int omap2_clk_enable_autoidle_all(void);
int omap2_clk_allow_idle(struct clk *clk);
int omap2_clk_deny_idle(struct clk *clk);
-void omap2_clkt_iclk_allow_idle(struct clk_hw_omap *clk);
-void omap2_clkt_iclk_deny_idle(struct clk_hw_omap *clk);
-void omap2_clk_dflt_find_companion(struct clk_hw_omap *clk,
- void __iomem **other_reg,
- u8 *other_bit);
-void omap2_clk_dflt_find_idlest(struct clk_hw_omap *clk,
- void __iomem **idlest_reg,
- u8 *idlest_bit, u8 *idlest_val);
unsigned long omap2_dpllcore_recalc(struct clk_hw *hw,
unsigned long parent_rate);
int omap2_reprogram_dpllcore(struct clk_hw *clk, unsigned long rate,
@@ -292,14 +252,9 @@ void omap2xxx_clkt_dpllcore_init(struct clk_hw *hw);
void omap2xxx_clkt_vps_init(void);
unsigned long omap2_get_dpll_rate(struct clk_hw_omap *clk);
-void __iomem *ti_clk_get_reg_addr(struct device_node *node, int index);
-void ti_dt_clocks_register(struct ti_dt_clk *oclks);
void ti_dt_clk_init_provider(struct device_node *np, int index);
void ti_dt_clk_init_retry_clks(void);
void ti_dt_clockdomains_setup(void);
-int ti_clk_retry_init(struct device_node *node, struct clk_hw *hw,
- ti_of_clk_init_cb_t func);
-int ti_clk_add_component(struct device_node *node, struct clk_hw *hw, int type);
int omap3430_dt_clk_init(void);
int omap3630_dt_clk_init(void);
--
1.7.9.5
^ permalink raw reply related [flat|nested] 120+ messages in thread
* [PATCHv2 23/27] clk: ti: move some public definitions to private header
@ 2015-05-11 8:54 ` Tero Kristo
0 siblings, 0 replies; 120+ messages in thread
From: Tero Kristo @ 2015-05-11 8:54 UTC (permalink / raw)
To: linux-arm-kernel
Several exported TI clock driver features are no longer needed outside
the clock driver itself, thus move all of these to the driver private
header file. Also, update some of the driver files to actually include
this header.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
---
drivers/clk/ti/apll.c | 2 ++
drivers/clk/ti/autoidle.c | 2 ++
drivers/clk/ti/clk-43xx.c | 2 ++
drivers/clk/ti/clk-44xx.c | 2 ++
drivers/clk/ti/clk-54xx.c | 2 ++
drivers/clk/ti/clk-7xx.c | 3 ++-
drivers/clk/ti/clock.h | 47 +++++++++++++++++++++++++++++++++++++++++++++
include/linux/clk/ti.h | 45 -------------------------------------------
8 files changed, 59 insertions(+), 46 deletions(-)
diff --git a/drivers/clk/ti/apll.c b/drivers/clk/ti/apll.c
index 49baf38..594b759 100644
--- a/drivers/clk/ti/apll.c
+++ b/drivers/clk/ti/apll.c
@@ -27,6 +27,8 @@
#include <linux/clk/ti.h>
#include <linux/delay.h>
+#include "clock.h"
+
#define APLL_FORCE_LOCK 0x1
#define APLL_AUTO_IDLE 0x2
#define MAX_APLL_WAIT_TRIES 1000000
diff --git a/drivers/clk/ti/autoidle.c b/drivers/clk/ti/autoidle.c
index 3dbcc36..94f0dcd 100644
--- a/drivers/clk/ti/autoidle.c
+++ b/drivers/clk/ti/autoidle.c
@@ -22,6 +22,8 @@
#include <linux/of_address.h>
#include <linux/clk/ti.h>
+#include "clock.h"
+
struct clk_ti_autoidle {
void __iomem *reg;
u8 shift;
diff --git a/drivers/clk/ti/clk-43xx.c b/drivers/clk/ti/clk-43xx.c
index 3795fce..8943167 100644
--- a/drivers/clk/ti/clk-43xx.c
+++ b/drivers/clk/ti/clk-43xx.c
@@ -19,6 +19,8 @@
#include <linux/clk-provider.h>
#include <linux/clk/ti.h>
+#include "clock.h"
+
static struct ti_dt_clk am43xx_clks[] = {
DT_CLK(NULL, "clk_32768_ck", "clk_32768_ck"),
DT_CLK(NULL, "clk_rc32k_ck", "clk_rc32k_ck"),
diff --git a/drivers/clk/ti/clk-44xx.c b/drivers/clk/ti/clk-44xx.c
index 581db77..7a8b51b 100644
--- a/drivers/clk/ti/clk-44xx.c
+++ b/drivers/clk/ti/clk-44xx.c
@@ -16,6 +16,8 @@
#include <linux/clkdev.h>
#include <linux/clk/ti.h>
+#include "clock.h"
+
/*
* OMAP4 ABE DPLL default frequency. In OMAP4460 TRM version V, section
* "3.6.3.2.3 CM1_ABE Clock Generator" states that the "DPLL_ABE_X2_CLK
diff --git a/drivers/clk/ti/clk-54xx.c b/drivers/clk/ti/clk-54xx.c
index 96c69a3..59ce2fa 100644
--- a/drivers/clk/ti/clk-54xx.c
+++ b/drivers/clk/ti/clk-54xx.c
@@ -17,6 +17,8 @@
#include <linux/io.h>
#include <linux/clk/ti.h>
+#include "clock.h"
+
#define OMAP5_DPLL_ABE_DEFFREQ 98304000
/*
diff --git a/drivers/clk/ti/clk-7xx.c b/drivers/clk/ti/clk-7xx.c
index 5d2217a..8b82721 100644
--- a/drivers/clk/ti/clk-7xx.c
+++ b/drivers/clk/ti/clk-7xx.c
@@ -16,11 +16,12 @@
#include <linux/clkdev.h>
#include <linux/clk/ti.h>
+#include "clock.h"
+
#define DRA7_DPLL_ABE_DEFFREQ 180633600
#define DRA7_DPLL_GMAC_DEFFREQ 1000000000
#define DRA7_DPLL_USB_DEFFREQ 960000000
-
static struct ti_dt_clk dra7xx_clks[] = {
DT_CLK(NULL, "atl_clkin0_ck", "atl_clkin0_ck"),
DT_CLK(NULL, "atl_clkin1_ck", "atl_clkin1_ck"),
diff --git a/drivers/clk/ti/clock.h b/drivers/clk/ti/clock.h
index 0ca5a36..3c43125 100644
--- a/drivers/clk/ti/clock.h
+++ b/drivers/clk/ti/clock.h
@@ -154,6 +154,35 @@ struct ti_clk_dpll {
u8 recal_st_bit;
};
+/* Composite clock component types */
+enum {
+ CLK_COMPONENT_TYPE_GATE = 0,
+ CLK_COMPONENT_TYPE_DIVIDER,
+ CLK_COMPONENT_TYPE_MUX,
+ CLK_COMPONENT_TYPE_MAX,
+};
+
+/**
+ * struct ti_dt_clk - OMAP DT clock alias declarations
+ * @lk: clock lookup definition
+ * @node_name: clock DT node to map to
+ */
+struct ti_dt_clk {
+ struct clk_lookup lk;
+ char *node_name;
+};
+
+#define DT_CLK(dev, con, name) \
+ { \
+ .lk = { \
+ .dev_id = dev, \
+ .con_id = con, \
+ }, \
+ .node_name = name, \
+ }
+
+typedef void (*ti_of_clk_init_cb_t)(struct clk_hw *, struct device_node *);
+
struct clk *ti_clk_register_gate(struct ti_clk *setup);
struct clk *ti_clk_register_interface(struct ti_clk *setup);
struct clk *ti_clk_register_mux(struct ti_clk *setup);
@@ -169,6 +198,12 @@ void ti_clk_patch_legacy_clks(struct ti_clk **patch);
struct clk *ti_clk_register_clk(struct ti_clk *setup);
int ti_clk_register_legacy_clks(struct ti_clk_alias *clks);
+void __iomem *ti_clk_get_reg_addr(struct device_node *node, int index);
+void ti_dt_clocks_register(struct ti_dt_clk *oclks);
+int ti_clk_retry_init(struct device_node *node, struct clk_hw *hw,
+ ti_of_clk_init_cb_t func);
+int ti_clk_add_component(struct device_node *node, struct clk_hw *hw, int type);
+
void omap2_init_clk_hw_omap_clocks(struct clk *clk);
int of_ti_clk_autoidle_setup(struct device_node *node);
void omap2_clk_enable_init_clocks(const char **clk_names, u8 num_clocks);
@@ -186,12 +221,24 @@ extern const struct clk_hw_omap_ops clkhwops_omap3430es2_iclk_ssi_wait;
extern const struct clk_hw_omap_ops clkhwops_am35xx_ipss_module_wait;
extern const struct clk_hw_omap_ops clkhwops_am35xx_ipss_wait;
+extern const struct clk_ops ti_clk_divider_ops;
+extern const struct clk_ops ti_clk_mux_ops;
+
int omap2_clkops_enable_clkdm(struct clk_hw *hw);
void omap2_clkops_disable_clkdm(struct clk_hw *hw);
int omap2_dflt_clk_enable(struct clk_hw *hw);
void omap2_dflt_clk_disable(struct clk_hw *hw);
int omap2_dflt_clk_is_enabled(struct clk_hw *hw);
+void omap2_clk_dflt_find_companion(struct clk_hw_omap *clk,
+ void __iomem **other_reg,
+ u8 *other_bit);
+void omap2_clk_dflt_find_idlest(struct clk_hw_omap *clk,
+ void __iomem **idlest_reg,
+ u8 *idlest_bit, u8 *idlest_val);
+
+void omap2_clkt_iclk_allow_idle(struct clk_hw_omap *clk);
+void omap2_clkt_iclk_deny_idle(struct clk_hw_omap *clk);
u8 omap2_init_dpll_parent(struct clk_hw *hw);
int omap3_noncore_dpll_enable(struct clk_hw *hw);
diff --git a/include/linux/clk/ti.h b/include/linux/clk/ti.h
index fc8e9ad..53fe38f 100644
--- a/include/linux/clk/ti.h
+++ b/include/linux/clk/ti.h
@@ -188,33 +188,6 @@ struct clk_hw_omap {
/* DPLL Type and DCO Selection Flags */
#define DPLL_J_TYPE 0x1
-/* Composite clock component types */
-enum {
- CLK_COMPONENT_TYPE_GATE = 0,
- CLK_COMPONENT_TYPE_DIVIDER,
- CLK_COMPONENT_TYPE_MUX,
- CLK_COMPONENT_TYPE_MAX,
-};
-
-/**
- * struct ti_dt_clk - OMAP DT clock alias declarations
- * @lk: clock lookup definition
- * @node_name: clock DT node to map to
- */
-struct ti_dt_clk {
- struct clk_lookup lk;
- char *node_name;
-};
-
-#define DT_CLK(dev, con, name) \
- { \
- .lk = { \
- .dev_id = dev, \
- .con_id = con, \
- }, \
- .node_name = name, \
- }
-
/* Static memmap indices */
enum {
TI_CLKM_CM = 0,
@@ -225,8 +198,6 @@ enum {
CLK_MAX_MEMMAPS
};
-typedef void (*ti_of_clk_init_cb_t)(struct clk_hw *, struct device_node *);
-
/**
* struct clk_omap_reg - OMAP register declaration
* @offset: offset from the master IP module base address
@@ -266,9 +237,6 @@ struct ti_clk_ll_ops {
extern struct ti_clk_ll_ops *ti_clk_ll_ops;
-extern const struct clk_ops ti_clk_divider_ops;
-extern const struct clk_ops ti_clk_mux_ops;
-
#define to_clk_hw_omap(_hw) container_of(_hw, struct clk_hw_omap, hw)
void omap2_init_clk_clkdm(struct clk_hw *clk);
@@ -276,14 +244,6 @@ int omap2_clk_disable_autoidle_all(void);
int omap2_clk_enable_autoidle_all(void);
int omap2_clk_allow_idle(struct clk *clk);
int omap2_clk_deny_idle(struct clk *clk);
-void omap2_clkt_iclk_allow_idle(struct clk_hw_omap *clk);
-void omap2_clkt_iclk_deny_idle(struct clk_hw_omap *clk);
-void omap2_clk_dflt_find_companion(struct clk_hw_omap *clk,
- void __iomem **other_reg,
- u8 *other_bit);
-void omap2_clk_dflt_find_idlest(struct clk_hw_omap *clk,
- void __iomem **idlest_reg,
- u8 *idlest_bit, u8 *idlest_val);
unsigned long omap2_dpllcore_recalc(struct clk_hw *hw,
unsigned long parent_rate);
int omap2_reprogram_dpllcore(struct clk_hw *clk, unsigned long rate,
@@ -292,14 +252,9 @@ void omap2xxx_clkt_dpllcore_init(struct clk_hw *hw);
void omap2xxx_clkt_vps_init(void);
unsigned long omap2_get_dpll_rate(struct clk_hw_omap *clk);
-void __iomem *ti_clk_get_reg_addr(struct device_node *node, int index);
-void ti_dt_clocks_register(struct ti_dt_clk *oclks);
void ti_dt_clk_init_provider(struct device_node *np, int index);
void ti_dt_clk_init_retry_clks(void);
void ti_dt_clockdomains_setup(void);
-int ti_clk_retry_init(struct device_node *node, struct clk_hw *hw,
- ti_of_clk_init_cb_t func);
-int ti_clk_add_component(struct device_node *node, struct clk_hw *hw, int type);
int omap3430_dt_clk_init(void);
int omap3630_dt_clk_init(void);
--
1.7.9.5
^ permalink raw reply related [flat|nested] 120+ messages in thread
* [PATCHv2 24/27] ARM: OMAP2+: clock: remove dead definitions from the clock header file
2015-05-11 8:54 ` Tero Kristo
(?)
@ 2015-05-11 8:54 ` Tero Kristo
-1 siblings, 0 replies; 120+ messages in thread
From: Tero Kristo @ 2015-05-11 8:54 UTC (permalink / raw)
To: mturquette, tony, linux-omap, linux-clk, sboyd, paul; +Cc: linux-arm-kernel
Cleanup the mess in clock.h by removing all definitions that are no longer
used for anything.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
---
arch/arm/mach-omap2/clkt34xx_dpll3m2.c | 1 -
arch/arm/mach-omap2/clock.h | 124 --------------------------------
arch/arm/mach-omap2/clock34xx.h | 18 -----
3 files changed, 143 deletions(-)
delete mode 100644 arch/arm/mach-omap2/clock34xx.h
diff --git a/arch/arm/mach-omap2/clkt34xx_dpll3m2.c b/arch/arm/mach-omap2/clkt34xx_dpll3m2.c
index 6cd2961..07e1956 100644
--- a/arch/arm/mach-omap2/clkt34xx_dpll3m2.c
+++ b/arch/arm/mach-omap2/clkt34xx_dpll3m2.c
@@ -23,7 +23,6 @@
#include "clock.h"
#include "clock3xxx.h"
-#include "clock34xx.h"
#include "sdrc.h"
#include "sram.h"
diff --git a/arch/arm/mach-omap2/clock.h b/arch/arm/mach-omap2/clock.h
index a7e9511..1986ab2 100644
--- a/arch/arm/mach-omap2/clock.h
+++ b/arch/arm/mach-omap2/clock.h
@@ -23,90 +23,6 @@
#include <linux/clk-provider.h>
#include <linux/clk/ti.h>
-struct omap_clk {
- u16 cpu;
- struct clk_lookup lk;
-};
-
-#define CLK(dev, con, ck) \
- { \
- .lk = { \
- .dev_id = dev, \
- .con_id = con, \
- .clk = ck, \
- }, \
- }
-
-struct clockdomain;
-
-#define DEFINE_STRUCT_CLK(_name, _parent_array_name, _clkops_name) \
- static struct clk_core _name##_core = { \
- .name = #_name, \
- .hw = &_name##_hw.hw, \
- .parent_names = _parent_array_name, \
- .num_parents = ARRAY_SIZE(_parent_array_name), \
- .ops = &_clkops_name, \
- }; \
- static struct clk _name = { \
- .core = &_name##_core, \
- };
-
-#define DEFINE_STRUCT_CLK_FLAGS(_name, _parent_array_name, \
- _clkops_name, _flags) \
- static struct clk_core _name##_core = { \
- .name = #_name, \
- .hw = &_name##_hw.hw, \
- .parent_names = _parent_array_name, \
- .num_parents = ARRAY_SIZE(_parent_array_name), \
- .ops = &_clkops_name, \
- .flags = _flags, \
- }; \
- static struct clk _name = { \
- .core = &_name##_core, \
- };
-
-#define DEFINE_STRUCT_CLK_HW_OMAP(_name, _clkdm_name) \
- static struct clk_hw_omap _name##_hw = { \
- .hw = { \
- .clk = &_name, \
- }, \
- .clkdm_name = _clkdm_name, \
- };
-
-#define DEFINE_CLK_OMAP_MUX(_name, _clkdm_name, _clksel, \
- _clksel_reg, _clksel_mask, \
- _parent_names, _ops) \
- static struct clk _name; \
- static struct clk_hw_omap _name##_hw = { \
- .hw = { \
- .clk = &_name, \
- }, \
- .clksel = _clksel, \
- .clksel_reg = _clksel_reg, \
- .clksel_mask = _clksel_mask, \
- .clkdm_name = _clkdm_name, \
- }; \
- DEFINE_STRUCT_CLK(_name, _parent_names, _ops);
-
-#define DEFINE_CLK_OMAP_MUX_GATE(_name, _clkdm_name, _clksel, \
- _clksel_reg, _clksel_mask, \
- _enable_reg, _enable_bit, \
- _hwops, _parent_names, _ops) \
- static struct clk _name; \
- static struct clk_hw_omap _name##_hw = { \
- .hw = { \
- .clk = &_name, \
- }, \
- .ops = _hwops, \
- .enable_reg = _enable_reg, \
- .enable_bit = _enable_bit, \
- .clksel = _clksel, \
- .clksel_reg = _clksel_reg, \
- .clksel_mask = _clksel_mask, \
- .clkdm_name = _clkdm_name, \
- }; \
- DEFINE_STRUCT_CLK(_name, _parent_names, _ops);
-
/* struct clksel_rate.flags possibilities */
#define RATE_IN_242X (1 << 0)
#define RATE_IN_243X (1 << 1)
@@ -127,38 +43,6 @@ struct clockdomain;
/* RATE_IN_3430ES2PLUS_36XX includes 34xx/35xx with ES >=2, and all 36xx/37xx */
#define RATE_IN_3430ES2PLUS_36XX (RATE_IN_3430ES2PLUS | RATE_IN_36XX)
-
-/**
- * struct clksel_rate - register bitfield values corresponding to clk divisors
- * @val: register bitfield value (shifted to bit 0)
- * @div: clock divisor corresponding to @val
- * @flags: (see "struct clksel_rate.flags possibilities" above)
- *
- * @val should match the value of a read from struct clk.clksel_reg
- * AND'ed with struct clk.clksel_mask, shifted right to bit 0.
- *
- * @div is the divisor that should be applied to the parent clock's rate
- * to produce the current clock's rate.
- */
-struct clksel_rate {
- u32 val;
- u8 div;
- u16 flags;
-};
-
-/**
- * struct clksel - available parent clocks, and a pointer to their divisors
- * @parent: struct clk * to a possible parent clock
- * @rates: available divisors for this parent clock
- *
- * A struct clksel is always associated with one or more struct clks
- * and one or more struct clksel_rates.
- */
-struct clksel {
- struct clk *parent;
- const struct clksel_rate *rates;
-};
-
/* CM_CLKSEL2_PLL.CORE_CLK_SRC bits (2XXX) */
#define CORE_CLK_SRC_32K 0x0
#define CORE_CLK_SRC_DPLL 0x1
@@ -194,14 +78,6 @@ extern const struct clkops clkops_omap2_dflt;
extern struct clk_functions omap2_clk_functions;
-extern const struct clk_hw_omap_ops clkhwops_wait;
-extern const struct clk_hw_omap_ops clkhwops_omap3430es2_ssi_wait;
-extern const struct clk_hw_omap_ops clkhwops_omap3430es2_dss_usbhost_wait;
-extern const struct clk_hw_omap_ops clkhwops_omap3430es2_hsotgusb_wait;
-extern const struct clk_hw_omap_ops clkhwops_am35xx_ipss_module_wait;
-extern const struct clk_hw_omap_ops clkhwops_apll54;
-extern const struct clk_hw_omap_ops clkhwops_apll96;
-
struct regmap;
int __init omap2_clk_provider_init(struct device_node *np, int index,
diff --git a/arch/arm/mach-omap2/clock34xx.h b/arch/arm/mach-omap2/clock34xx.h
deleted file mode 100644
index 084ba71..0000000
--- a/arch/arm/mach-omap2/clock34xx.h
+++ /dev/null
@@ -1,18 +0,0 @@
-/*
- * OMAP34xx clock function prototypes and macros
- *
- * Copyright (C) 2007-2010 Texas Instruments, Inc.
- * Copyright (C) 2007-2011 Nokia Corporation
- */
-
-#ifndef __ARCH_ARM_MACH_OMAP2_CLOCK34XX_H
-#define __ARCH_ARM_MACH_OMAP2_CLOCK34XX_H
-
-extern const struct clkops clkops_omap3430es2_ssi_wait;
-extern const struct clkops clkops_omap3430es2_iclk_ssi_wait;
-extern const struct clkops clkops_omap3430es2_hsotgusb_wait;
-extern const struct clkops clkops_omap3430es2_iclk_hsotgusb_wait;
-extern const struct clkops clkops_omap3430es2_dss_usbhost_wait;
-extern const struct clkops clkops_omap3430es2_iclk_dss_usbhost_wait;
-
-#endif
--
1.7.9.5
^ permalink raw reply related [flat|nested] 120+ messages in thread
* [PATCHv2 24/27] ARM: OMAP2+: clock: remove dead definitions from the clock header file
@ 2015-05-11 8:54 ` Tero Kristo
0 siblings, 0 replies; 120+ messages in thread
From: Tero Kristo @ 2015-05-11 8:54 UTC (permalink / raw)
To: mturquette, tony, linux-omap, linux-clk, sboyd, paul; +Cc: linux-arm-kernel
Cleanup the mess in clock.h by removing all definitions that are no longer
used for anything.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
---
arch/arm/mach-omap2/clkt34xx_dpll3m2.c | 1 -
arch/arm/mach-omap2/clock.h | 124 --------------------------------
arch/arm/mach-omap2/clock34xx.h | 18 -----
3 files changed, 143 deletions(-)
delete mode 100644 arch/arm/mach-omap2/clock34xx.h
diff --git a/arch/arm/mach-omap2/clkt34xx_dpll3m2.c b/arch/arm/mach-omap2/clkt34xx_dpll3m2.c
index 6cd2961..07e1956 100644
--- a/arch/arm/mach-omap2/clkt34xx_dpll3m2.c
+++ b/arch/arm/mach-omap2/clkt34xx_dpll3m2.c
@@ -23,7 +23,6 @@
#include "clock.h"
#include "clock3xxx.h"
-#include "clock34xx.h"
#include "sdrc.h"
#include "sram.h"
diff --git a/arch/arm/mach-omap2/clock.h b/arch/arm/mach-omap2/clock.h
index a7e9511..1986ab2 100644
--- a/arch/arm/mach-omap2/clock.h
+++ b/arch/arm/mach-omap2/clock.h
@@ -23,90 +23,6 @@
#include <linux/clk-provider.h>
#include <linux/clk/ti.h>
-struct omap_clk {
- u16 cpu;
- struct clk_lookup lk;
-};
-
-#define CLK(dev, con, ck) \
- { \
- .lk = { \
- .dev_id = dev, \
- .con_id = con, \
- .clk = ck, \
- }, \
- }
-
-struct clockdomain;
-
-#define DEFINE_STRUCT_CLK(_name, _parent_array_name, _clkops_name) \
- static struct clk_core _name##_core = { \
- .name = #_name, \
- .hw = &_name##_hw.hw, \
- .parent_names = _parent_array_name, \
- .num_parents = ARRAY_SIZE(_parent_array_name), \
- .ops = &_clkops_name, \
- }; \
- static struct clk _name = { \
- .core = &_name##_core, \
- };
-
-#define DEFINE_STRUCT_CLK_FLAGS(_name, _parent_array_name, \
- _clkops_name, _flags) \
- static struct clk_core _name##_core = { \
- .name = #_name, \
- .hw = &_name##_hw.hw, \
- .parent_names = _parent_array_name, \
- .num_parents = ARRAY_SIZE(_parent_array_name), \
- .ops = &_clkops_name, \
- .flags = _flags, \
- }; \
- static struct clk _name = { \
- .core = &_name##_core, \
- };
-
-#define DEFINE_STRUCT_CLK_HW_OMAP(_name, _clkdm_name) \
- static struct clk_hw_omap _name##_hw = { \
- .hw = { \
- .clk = &_name, \
- }, \
- .clkdm_name = _clkdm_name, \
- };
-
-#define DEFINE_CLK_OMAP_MUX(_name, _clkdm_name, _clksel, \
- _clksel_reg, _clksel_mask, \
- _parent_names, _ops) \
- static struct clk _name; \
- static struct clk_hw_omap _name##_hw = { \
- .hw = { \
- .clk = &_name, \
- }, \
- .clksel = _clksel, \
- .clksel_reg = _clksel_reg, \
- .clksel_mask = _clksel_mask, \
- .clkdm_name = _clkdm_name, \
- }; \
- DEFINE_STRUCT_CLK(_name, _parent_names, _ops);
-
-#define DEFINE_CLK_OMAP_MUX_GATE(_name, _clkdm_name, _clksel, \
- _clksel_reg, _clksel_mask, \
- _enable_reg, _enable_bit, \
- _hwops, _parent_names, _ops) \
- static struct clk _name; \
- static struct clk_hw_omap _name##_hw = { \
- .hw = { \
- .clk = &_name, \
- }, \
- .ops = _hwops, \
- .enable_reg = _enable_reg, \
- .enable_bit = _enable_bit, \
- .clksel = _clksel, \
- .clksel_reg = _clksel_reg, \
- .clksel_mask = _clksel_mask, \
- .clkdm_name = _clkdm_name, \
- }; \
- DEFINE_STRUCT_CLK(_name, _parent_names, _ops);
-
/* struct clksel_rate.flags possibilities */
#define RATE_IN_242X (1 << 0)
#define RATE_IN_243X (1 << 1)
@@ -127,38 +43,6 @@ struct clockdomain;
/* RATE_IN_3430ES2PLUS_36XX includes 34xx/35xx with ES >=2, and all 36xx/37xx */
#define RATE_IN_3430ES2PLUS_36XX (RATE_IN_3430ES2PLUS | RATE_IN_36XX)
-
-/**
- * struct clksel_rate - register bitfield values corresponding to clk divisors
- * @val: register bitfield value (shifted to bit 0)
- * @div: clock divisor corresponding to @val
- * @flags: (see "struct clksel_rate.flags possibilities" above)
- *
- * @val should match the value of a read from struct clk.clksel_reg
- * AND'ed with struct clk.clksel_mask, shifted right to bit 0.
- *
- * @div is the divisor that should be applied to the parent clock's rate
- * to produce the current clock's rate.
- */
-struct clksel_rate {
- u32 val;
- u8 div;
- u16 flags;
-};
-
-/**
- * struct clksel - available parent clocks, and a pointer to their divisors
- * @parent: struct clk * to a possible parent clock
- * @rates: available divisors for this parent clock
- *
- * A struct clksel is always associated with one or more struct clks
- * and one or more struct clksel_rates.
- */
-struct clksel {
- struct clk *parent;
- const struct clksel_rate *rates;
-};
-
/* CM_CLKSEL2_PLL.CORE_CLK_SRC bits (2XXX) */
#define CORE_CLK_SRC_32K 0x0
#define CORE_CLK_SRC_DPLL 0x1
@@ -194,14 +78,6 @@ extern const struct clkops clkops_omap2_dflt;
extern struct clk_functions omap2_clk_functions;
-extern const struct clk_hw_omap_ops clkhwops_wait;
-extern const struct clk_hw_omap_ops clkhwops_omap3430es2_ssi_wait;
-extern const struct clk_hw_omap_ops clkhwops_omap3430es2_dss_usbhost_wait;
-extern const struct clk_hw_omap_ops clkhwops_omap3430es2_hsotgusb_wait;
-extern const struct clk_hw_omap_ops clkhwops_am35xx_ipss_module_wait;
-extern const struct clk_hw_omap_ops clkhwops_apll54;
-extern const struct clk_hw_omap_ops clkhwops_apll96;
-
struct regmap;
int __init omap2_clk_provider_init(struct device_node *np, int index,
diff --git a/arch/arm/mach-omap2/clock34xx.h b/arch/arm/mach-omap2/clock34xx.h
deleted file mode 100644
index 084ba71..0000000
--- a/arch/arm/mach-omap2/clock34xx.h
+++ /dev/null
@@ -1,18 +0,0 @@
-/*
- * OMAP34xx clock function prototypes and macros
- *
- * Copyright (C) 2007-2010 Texas Instruments, Inc.
- * Copyright (C) 2007-2011 Nokia Corporation
- */
-
-#ifndef __ARCH_ARM_MACH_OMAP2_CLOCK34XX_H
-#define __ARCH_ARM_MACH_OMAP2_CLOCK34XX_H
-
-extern const struct clkops clkops_omap3430es2_ssi_wait;
-extern const struct clkops clkops_omap3430es2_iclk_ssi_wait;
-extern const struct clkops clkops_omap3430es2_hsotgusb_wait;
-extern const struct clkops clkops_omap3430es2_iclk_hsotgusb_wait;
-extern const struct clkops clkops_omap3430es2_dss_usbhost_wait;
-extern const struct clkops clkops_omap3430es2_iclk_dss_usbhost_wait;
-
-#endif
--
1.7.9.5
^ permalink raw reply related [flat|nested] 120+ messages in thread
* [PATCHv2 24/27] ARM: OMAP2+: clock: remove dead definitions from the clock header file
@ 2015-05-11 8:54 ` Tero Kristo
0 siblings, 0 replies; 120+ messages in thread
From: Tero Kristo @ 2015-05-11 8:54 UTC (permalink / raw)
To: linux-arm-kernel
Cleanup the mess in clock.h by removing all definitions that are no longer
used for anything.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
---
arch/arm/mach-omap2/clkt34xx_dpll3m2.c | 1 -
arch/arm/mach-omap2/clock.h | 124 --------------------------------
arch/arm/mach-omap2/clock34xx.h | 18 -----
3 files changed, 143 deletions(-)
delete mode 100644 arch/arm/mach-omap2/clock34xx.h
diff --git a/arch/arm/mach-omap2/clkt34xx_dpll3m2.c b/arch/arm/mach-omap2/clkt34xx_dpll3m2.c
index 6cd2961..07e1956 100644
--- a/arch/arm/mach-omap2/clkt34xx_dpll3m2.c
+++ b/arch/arm/mach-omap2/clkt34xx_dpll3m2.c
@@ -23,7 +23,6 @@
#include "clock.h"
#include "clock3xxx.h"
-#include "clock34xx.h"
#include "sdrc.h"
#include "sram.h"
diff --git a/arch/arm/mach-omap2/clock.h b/arch/arm/mach-omap2/clock.h
index a7e9511..1986ab2 100644
--- a/arch/arm/mach-omap2/clock.h
+++ b/arch/arm/mach-omap2/clock.h
@@ -23,90 +23,6 @@
#include <linux/clk-provider.h>
#include <linux/clk/ti.h>
-struct omap_clk {
- u16 cpu;
- struct clk_lookup lk;
-};
-
-#define CLK(dev, con, ck) \
- { \
- .lk = { \
- .dev_id = dev, \
- .con_id = con, \
- .clk = ck, \
- }, \
- }
-
-struct clockdomain;
-
-#define DEFINE_STRUCT_CLK(_name, _parent_array_name, _clkops_name) \
- static struct clk_core _name##_core = { \
- .name = #_name, \
- .hw = &_name##_hw.hw, \
- .parent_names = _parent_array_name, \
- .num_parents = ARRAY_SIZE(_parent_array_name), \
- .ops = &_clkops_name, \
- }; \
- static struct clk _name = { \
- .core = &_name##_core, \
- };
-
-#define DEFINE_STRUCT_CLK_FLAGS(_name, _parent_array_name, \
- _clkops_name, _flags) \
- static struct clk_core _name##_core = { \
- .name = #_name, \
- .hw = &_name##_hw.hw, \
- .parent_names = _parent_array_name, \
- .num_parents = ARRAY_SIZE(_parent_array_name), \
- .ops = &_clkops_name, \
- .flags = _flags, \
- }; \
- static struct clk _name = { \
- .core = &_name##_core, \
- };
-
-#define DEFINE_STRUCT_CLK_HW_OMAP(_name, _clkdm_name) \
- static struct clk_hw_omap _name##_hw = { \
- .hw = { \
- .clk = &_name, \
- }, \
- .clkdm_name = _clkdm_name, \
- };
-
-#define DEFINE_CLK_OMAP_MUX(_name, _clkdm_name, _clksel, \
- _clksel_reg, _clksel_mask, \
- _parent_names, _ops) \
- static struct clk _name; \
- static struct clk_hw_omap _name##_hw = { \
- .hw = { \
- .clk = &_name, \
- }, \
- .clksel = _clksel, \
- .clksel_reg = _clksel_reg, \
- .clksel_mask = _clksel_mask, \
- .clkdm_name = _clkdm_name, \
- }; \
- DEFINE_STRUCT_CLK(_name, _parent_names, _ops);
-
-#define DEFINE_CLK_OMAP_MUX_GATE(_name, _clkdm_name, _clksel, \
- _clksel_reg, _clksel_mask, \
- _enable_reg, _enable_bit, \
- _hwops, _parent_names, _ops) \
- static struct clk _name; \
- static struct clk_hw_omap _name##_hw = { \
- .hw = { \
- .clk = &_name, \
- }, \
- .ops = _hwops, \
- .enable_reg = _enable_reg, \
- .enable_bit = _enable_bit, \
- .clksel = _clksel, \
- .clksel_reg = _clksel_reg, \
- .clksel_mask = _clksel_mask, \
- .clkdm_name = _clkdm_name, \
- }; \
- DEFINE_STRUCT_CLK(_name, _parent_names, _ops);
-
/* struct clksel_rate.flags possibilities */
#define RATE_IN_242X (1 << 0)
#define RATE_IN_243X (1 << 1)
@@ -127,38 +43,6 @@ struct clockdomain;
/* RATE_IN_3430ES2PLUS_36XX includes 34xx/35xx with ES >=2, and all 36xx/37xx */
#define RATE_IN_3430ES2PLUS_36XX (RATE_IN_3430ES2PLUS | RATE_IN_36XX)
-
-/**
- * struct clksel_rate - register bitfield values corresponding to clk divisors
- * @val: register bitfield value (shifted to bit 0)
- * @div: clock divisor corresponding to @val
- * @flags: (see "struct clksel_rate.flags possibilities" above)
- *
- * @val should match the value of a read from struct clk.clksel_reg
- * AND'ed with struct clk.clksel_mask, shifted right to bit 0.
- *
- * @div is the divisor that should be applied to the parent clock's rate
- * to produce the current clock's rate.
- */
-struct clksel_rate {
- u32 val;
- u8 div;
- u16 flags;
-};
-
-/**
- * struct clksel - available parent clocks, and a pointer to their divisors
- * @parent: struct clk * to a possible parent clock
- * @rates: available divisors for this parent clock
- *
- * A struct clksel is always associated with one or more struct clks
- * and one or more struct clksel_rates.
- */
-struct clksel {
- struct clk *parent;
- const struct clksel_rate *rates;
-};
-
/* CM_CLKSEL2_PLL.CORE_CLK_SRC bits (2XXX) */
#define CORE_CLK_SRC_32K 0x0
#define CORE_CLK_SRC_DPLL 0x1
@@ -194,14 +78,6 @@ extern const struct clkops clkops_omap2_dflt;
extern struct clk_functions omap2_clk_functions;
-extern const struct clk_hw_omap_ops clkhwops_wait;
-extern const struct clk_hw_omap_ops clkhwops_omap3430es2_ssi_wait;
-extern const struct clk_hw_omap_ops clkhwops_omap3430es2_dss_usbhost_wait;
-extern const struct clk_hw_omap_ops clkhwops_omap3430es2_hsotgusb_wait;
-extern const struct clk_hw_omap_ops clkhwops_am35xx_ipss_module_wait;
-extern const struct clk_hw_omap_ops clkhwops_apll54;
-extern const struct clk_hw_omap_ops clkhwops_apll96;
-
struct regmap;
int __init omap2_clk_provider_init(struct device_node *np, int index,
diff --git a/arch/arm/mach-omap2/clock34xx.h b/arch/arm/mach-omap2/clock34xx.h
deleted file mode 100644
index 084ba71..0000000
--- a/arch/arm/mach-omap2/clock34xx.h
+++ /dev/null
@@ -1,18 +0,0 @@
-/*
- * OMAP34xx clock function prototypes and macros
- *
- * Copyright (C) 2007-2010 Texas Instruments, Inc.
- * Copyright (C) 2007-2011 Nokia Corporation
- */
-
-#ifndef __ARCH_ARM_MACH_OMAP2_CLOCK34XX_H
-#define __ARCH_ARM_MACH_OMAP2_CLOCK34XX_H
-
-extern const struct clkops clkops_omap3430es2_ssi_wait;
-extern const struct clkops clkops_omap3430es2_iclk_ssi_wait;
-extern const struct clkops clkops_omap3430es2_hsotgusb_wait;
-extern const struct clkops clkops_omap3430es2_iclk_hsotgusb_wait;
-extern const struct clkops clkops_omap3430es2_dss_usbhost_wait;
-extern const struct clkops clkops_omap3430es2_iclk_dss_usbhost_wait;
-
-#endif
--
1.7.9.5
^ permalink raw reply related [flat|nested] 120+ messages in thread
* [PATCHv2 25/27] clk: ti: remove exported ll_ops struct, instead add an API for registration
2015-05-11 8:54 ` Tero Kristo
(?)
@ 2015-05-11 8:54 ` Tero Kristo
-1 siblings, 0 replies; 120+ messages in thread
From: Tero Kristo @ 2015-05-11 8:54 UTC (permalink / raw)
To: mturquette, tony, linux-omap, linux-clk, sboyd, paul; +Cc: linux-arm-kernel
We should avoid exporting data from drivers, instead use an API for
registering the clock low level operations.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
---
arch/arm/mach-omap2/clock.c | 17 +++++++++++++----
arch/arm/mach-omap2/clock.h | 1 +
arch/arm/mach-omap2/io.c | 2 ++
drivers/clk/ti/clk.c | 21 +++++++++++++++++++++
drivers/clk/ti/clock.h | 2 ++
drivers/clk/ti/clockdomain.c | 2 ++
include/linux/clk/ti.h | 3 +--
7 files changed, 42 insertions(+), 6 deletions(-)
diff --git a/arch/arm/mach-omap2/clock.c b/arch/arm/mach-omap2/clock.c
index 99875db..40a88c2 100644
--- a/arch/arm/mach-omap2/clock.c
+++ b/arch/arm/mach-omap2/clock.c
@@ -113,6 +113,19 @@ static struct ti_clk_ll_ops omap_clk_ll_ops = {
};
/**
+ * omap2_clk_setup_ll_ops - setup clock driver low-level ops
+ *
+ * Sets up clock driver low-level platform ops. These are needed
+ * for register accesses and various other misc platform operations.
+ * Returns 0 on success, -EBUSY if low level ops have been registered
+ * already.
+ */
+int __init omap2_clk_setup_ll_ops(void)
+{
+ return ti_clk_setup_ll_ops(&omap_clk_ll_ops);
+}
+
+/**
* omap2_clk_provider_init - initialize a clock provider
* @match_table: DT device table to match for devices to init
* @np: device node pointer for the this clock provider
@@ -130,8 +143,6 @@ int __init omap2_clk_provider_init(struct device_node *np, int index,
{
struct clk_iomap *io;
- ti_clk_ll_ops = &omap_clk_ll_ops;
-
io = kzalloc(sizeof(*io), GFP_KERNEL);
io->regmap = syscon;
@@ -155,8 +166,6 @@ void __init omap2_clk_legacy_provider_init(int index, void __iomem *mem)
{
struct clk_iomap *io;
- ti_clk_ll_ops = &omap_clk_ll_ops;
-
io = memblock_virt_alloc(sizeof(*io), 0);
io->mem = mem;
diff --git a/arch/arm/mach-omap2/clock.h b/arch/arm/mach-omap2/clock.h
index 1986ab2..a7051d6 100644
--- a/arch/arm/mach-omap2/clock.h
+++ b/arch/arm/mach-omap2/clock.h
@@ -83,6 +83,7 @@ struct regmap;
int __init omap2_clk_provider_init(struct device_node *np, int index,
struct regmap *syscon, void __iomem *mem);
void __init omap2_clk_legacy_provider_init(int index, void __iomem *mem);
+int __init omap2_clk_setup_ll_ops(void);
void __init ti_clk_init_features(void);
#endif
diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c
index 7467856..a253aaf 100644
--- a/arch/arm/mach-omap2/io.c
+++ b/arch/arm/mach-omap2/io.c
@@ -722,6 +722,8 @@ int __init omap_clk_init(void)
ti_clk_init_features();
+ omap2_clk_setup_ll_ops();
+
if (of_have_populated_dt()) {
ret = omap_control_init();
if (ret)
diff --git a/drivers/clk/ti/clk.c b/drivers/clk/ti/clk.c
index f1dcd20..dc6b759 100644
--- a/drivers/clk/ti/clk.c
+++ b/drivers/clk/ti/clk.c
@@ -33,6 +33,27 @@ static struct device_node *clocks_node_ptr[CLK_MAX_MEMMAPS];
struct ti_clk_features ti_clk_features;
/**
+ * ti_clk_setup_ll_ops - setup low level clock operations
+ * @ops: low level clock ops descriptor
+ *
+ * Sets up low level clock operations for TI clock driver. This is used
+ * to provide various callbacks for the clock driver towards platform
+ * specific code. Returns 0 on success, -EBUSY if ll_ops have been
+ * registered already.
+ */
+int ti_clk_setup_ll_ops(struct ti_clk_ll_ops *ops)
+{
+ if (ti_clk_ll_ops) {
+ pr_err("Attempt to register ll_ops multiple times.\n");
+ return -EBUSY;
+ }
+
+ ti_clk_ll_ops = ops;
+
+ return 0;
+}
+
+/**
* ti_dt_clocks_register - register DT alias clocks during boot
* @oclks: list of clocks to register
*
diff --git a/drivers/clk/ti/clock.h b/drivers/clk/ti/clock.h
index 3c43125..d4d232fd 100644
--- a/drivers/clk/ti/clock.h
+++ b/drivers/clk/ti/clock.h
@@ -280,4 +280,6 @@ long omap4_dpll_regm4xen_determine_rate(struct clk_hw *hw,
unsigned long *best_parent_rate,
struct clk_hw **best_parent_clk);
+extern struct ti_clk_ll_ops *ti_clk_ll_ops;
+
#endif
diff --git a/drivers/clk/ti/clockdomain.c b/drivers/clk/ti/clockdomain.c
index 61ef87b..80a7b69 100644
--- a/drivers/clk/ti/clockdomain.c
+++ b/drivers/clk/ti/clockdomain.c
@@ -21,6 +21,8 @@
#include <linux/of_address.h>
#include <linux/clk/ti.h>
+#include "clock.h"
+
#undef pr_fmt
#define pr_fmt(fmt) "%s: " fmt, __func__
diff --git a/include/linux/clk/ti.h b/include/linux/clk/ti.h
index 53fe38f..267cca0 100644
--- a/include/linux/clk/ti.h
+++ b/include/linux/clk/ti.h
@@ -235,8 +235,6 @@ struct ti_clk_ll_ops {
u8 *idlest_reg_id);
};
-extern struct ti_clk_ll_ops *ti_clk_ll_ops;
-
#define to_clk_hw_omap(_hw) container_of(_hw, struct clk_hw_omap, hw)
void omap2_init_clk_clkdm(struct clk_hw *clk);
@@ -255,6 +253,7 @@ unsigned long omap2_get_dpll_rate(struct clk_hw_omap *clk);
void ti_dt_clk_init_provider(struct device_node *np, int index);
void ti_dt_clk_init_retry_clks(void);
void ti_dt_clockdomains_setup(void);
+int ti_clk_setup_ll_ops(struct ti_clk_ll_ops *ops);
int omap3430_dt_clk_init(void);
int omap3630_dt_clk_init(void);
--
1.7.9.5
^ permalink raw reply related [flat|nested] 120+ messages in thread
* [PATCHv2 25/27] clk: ti: remove exported ll_ops struct, instead add an API for registration
@ 2015-05-11 8:54 ` Tero Kristo
0 siblings, 0 replies; 120+ messages in thread
From: Tero Kristo @ 2015-05-11 8:54 UTC (permalink / raw)
To: mturquette, tony, linux-omap, linux-clk, sboyd, paul; +Cc: linux-arm-kernel
We should avoid exporting data from drivers, instead use an API for
registering the clock low level operations.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
---
arch/arm/mach-omap2/clock.c | 17 +++++++++++++----
arch/arm/mach-omap2/clock.h | 1 +
arch/arm/mach-omap2/io.c | 2 ++
drivers/clk/ti/clk.c | 21 +++++++++++++++++++++
drivers/clk/ti/clock.h | 2 ++
drivers/clk/ti/clockdomain.c | 2 ++
include/linux/clk/ti.h | 3 +--
7 files changed, 42 insertions(+), 6 deletions(-)
diff --git a/arch/arm/mach-omap2/clock.c b/arch/arm/mach-omap2/clock.c
index 99875db..40a88c2 100644
--- a/arch/arm/mach-omap2/clock.c
+++ b/arch/arm/mach-omap2/clock.c
@@ -113,6 +113,19 @@ static struct ti_clk_ll_ops omap_clk_ll_ops = {
};
/**
+ * omap2_clk_setup_ll_ops - setup clock driver low-level ops
+ *
+ * Sets up clock driver low-level platform ops. These are needed
+ * for register accesses and various other misc platform operations.
+ * Returns 0 on success, -EBUSY if low level ops have been registered
+ * already.
+ */
+int __init omap2_clk_setup_ll_ops(void)
+{
+ return ti_clk_setup_ll_ops(&omap_clk_ll_ops);
+}
+
+/**
* omap2_clk_provider_init - initialize a clock provider
* @match_table: DT device table to match for devices to init
* @np: device node pointer for the this clock provider
@@ -130,8 +143,6 @@ int __init omap2_clk_provider_init(struct device_node *np, int index,
{
struct clk_iomap *io;
- ti_clk_ll_ops = &omap_clk_ll_ops;
-
io = kzalloc(sizeof(*io), GFP_KERNEL);
io->regmap = syscon;
@@ -155,8 +166,6 @@ void __init omap2_clk_legacy_provider_init(int index, void __iomem *mem)
{
struct clk_iomap *io;
- ti_clk_ll_ops = &omap_clk_ll_ops;
-
io = memblock_virt_alloc(sizeof(*io), 0);
io->mem = mem;
diff --git a/arch/arm/mach-omap2/clock.h b/arch/arm/mach-omap2/clock.h
index 1986ab2..a7051d6 100644
--- a/arch/arm/mach-omap2/clock.h
+++ b/arch/arm/mach-omap2/clock.h
@@ -83,6 +83,7 @@ struct regmap;
int __init omap2_clk_provider_init(struct device_node *np, int index,
struct regmap *syscon, void __iomem *mem);
void __init omap2_clk_legacy_provider_init(int index, void __iomem *mem);
+int __init omap2_clk_setup_ll_ops(void);
void __init ti_clk_init_features(void);
#endif
diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c
index 7467856..a253aaf 100644
--- a/arch/arm/mach-omap2/io.c
+++ b/arch/arm/mach-omap2/io.c
@@ -722,6 +722,8 @@ int __init omap_clk_init(void)
ti_clk_init_features();
+ omap2_clk_setup_ll_ops();
+
if (of_have_populated_dt()) {
ret = omap_control_init();
if (ret)
diff --git a/drivers/clk/ti/clk.c b/drivers/clk/ti/clk.c
index f1dcd20..dc6b759 100644
--- a/drivers/clk/ti/clk.c
+++ b/drivers/clk/ti/clk.c
@@ -33,6 +33,27 @@ static struct device_node *clocks_node_ptr[CLK_MAX_MEMMAPS];
struct ti_clk_features ti_clk_features;
/**
+ * ti_clk_setup_ll_ops - setup low level clock operations
+ * @ops: low level clock ops descriptor
+ *
+ * Sets up low level clock operations for TI clock driver. This is used
+ * to provide various callbacks for the clock driver towards platform
+ * specific code. Returns 0 on success, -EBUSY if ll_ops have been
+ * registered already.
+ */
+int ti_clk_setup_ll_ops(struct ti_clk_ll_ops *ops)
+{
+ if (ti_clk_ll_ops) {
+ pr_err("Attempt to register ll_ops multiple times.\n");
+ return -EBUSY;
+ }
+
+ ti_clk_ll_ops = ops;
+
+ return 0;
+}
+
+/**
* ti_dt_clocks_register - register DT alias clocks during boot
* @oclks: list of clocks to register
*
diff --git a/drivers/clk/ti/clock.h b/drivers/clk/ti/clock.h
index 3c43125..d4d232fd 100644
--- a/drivers/clk/ti/clock.h
+++ b/drivers/clk/ti/clock.h
@@ -280,4 +280,6 @@ long omap4_dpll_regm4xen_determine_rate(struct clk_hw *hw,
unsigned long *best_parent_rate,
struct clk_hw **best_parent_clk);
+extern struct ti_clk_ll_ops *ti_clk_ll_ops;
+
#endif
diff --git a/drivers/clk/ti/clockdomain.c b/drivers/clk/ti/clockdomain.c
index 61ef87b..80a7b69 100644
--- a/drivers/clk/ti/clockdomain.c
+++ b/drivers/clk/ti/clockdomain.c
@@ -21,6 +21,8 @@
#include <linux/of_address.h>
#include <linux/clk/ti.h>
+#include "clock.h"
+
#undef pr_fmt
#define pr_fmt(fmt) "%s: " fmt, __func__
diff --git a/include/linux/clk/ti.h b/include/linux/clk/ti.h
index 53fe38f..267cca0 100644
--- a/include/linux/clk/ti.h
+++ b/include/linux/clk/ti.h
@@ -235,8 +235,6 @@ struct ti_clk_ll_ops {
u8 *idlest_reg_id);
};
-extern struct ti_clk_ll_ops *ti_clk_ll_ops;
-
#define to_clk_hw_omap(_hw) container_of(_hw, struct clk_hw_omap, hw)
void omap2_init_clk_clkdm(struct clk_hw *clk);
@@ -255,6 +253,7 @@ unsigned long omap2_get_dpll_rate(struct clk_hw_omap *clk);
void ti_dt_clk_init_provider(struct device_node *np, int index);
void ti_dt_clk_init_retry_clks(void);
void ti_dt_clockdomains_setup(void);
+int ti_clk_setup_ll_ops(struct ti_clk_ll_ops *ops);
int omap3430_dt_clk_init(void);
int omap3630_dt_clk_init(void);
--
1.7.9.5
^ permalink raw reply related [flat|nested] 120+ messages in thread
* [PATCHv2 25/27] clk: ti: remove exported ll_ops struct, instead add an API for registration
@ 2015-05-11 8:54 ` Tero Kristo
0 siblings, 0 replies; 120+ messages in thread
From: Tero Kristo @ 2015-05-11 8:54 UTC (permalink / raw)
To: linux-arm-kernel
We should avoid exporting data from drivers, instead use an API for
registering the clock low level operations.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
---
arch/arm/mach-omap2/clock.c | 17 +++++++++++++----
arch/arm/mach-omap2/clock.h | 1 +
arch/arm/mach-omap2/io.c | 2 ++
drivers/clk/ti/clk.c | 21 +++++++++++++++++++++
drivers/clk/ti/clock.h | 2 ++
drivers/clk/ti/clockdomain.c | 2 ++
include/linux/clk/ti.h | 3 +--
7 files changed, 42 insertions(+), 6 deletions(-)
diff --git a/arch/arm/mach-omap2/clock.c b/arch/arm/mach-omap2/clock.c
index 99875db..40a88c2 100644
--- a/arch/arm/mach-omap2/clock.c
+++ b/arch/arm/mach-omap2/clock.c
@@ -113,6 +113,19 @@ static struct ti_clk_ll_ops omap_clk_ll_ops = {
};
/**
+ * omap2_clk_setup_ll_ops - setup clock driver low-level ops
+ *
+ * Sets up clock driver low-level platform ops. These are needed
+ * for register accesses and various other misc platform operations.
+ * Returns 0 on success, -EBUSY if low level ops have been registered
+ * already.
+ */
+int __init omap2_clk_setup_ll_ops(void)
+{
+ return ti_clk_setup_ll_ops(&omap_clk_ll_ops);
+}
+
+/**
* omap2_clk_provider_init - initialize a clock provider
* @match_table: DT device table to match for devices to init
* @np: device node pointer for the this clock provider
@@ -130,8 +143,6 @@ int __init omap2_clk_provider_init(struct device_node *np, int index,
{
struct clk_iomap *io;
- ti_clk_ll_ops = &omap_clk_ll_ops;
-
io = kzalloc(sizeof(*io), GFP_KERNEL);
io->regmap = syscon;
@@ -155,8 +166,6 @@ void __init omap2_clk_legacy_provider_init(int index, void __iomem *mem)
{
struct clk_iomap *io;
- ti_clk_ll_ops = &omap_clk_ll_ops;
-
io = memblock_virt_alloc(sizeof(*io), 0);
io->mem = mem;
diff --git a/arch/arm/mach-omap2/clock.h b/arch/arm/mach-omap2/clock.h
index 1986ab2..a7051d6 100644
--- a/arch/arm/mach-omap2/clock.h
+++ b/arch/arm/mach-omap2/clock.h
@@ -83,6 +83,7 @@ struct regmap;
int __init omap2_clk_provider_init(struct device_node *np, int index,
struct regmap *syscon, void __iomem *mem);
void __init omap2_clk_legacy_provider_init(int index, void __iomem *mem);
+int __init omap2_clk_setup_ll_ops(void);
void __init ti_clk_init_features(void);
#endif
diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c
index 7467856..a253aaf 100644
--- a/arch/arm/mach-omap2/io.c
+++ b/arch/arm/mach-omap2/io.c
@@ -722,6 +722,8 @@ int __init omap_clk_init(void)
ti_clk_init_features();
+ omap2_clk_setup_ll_ops();
+
if (of_have_populated_dt()) {
ret = omap_control_init();
if (ret)
diff --git a/drivers/clk/ti/clk.c b/drivers/clk/ti/clk.c
index f1dcd20..dc6b759 100644
--- a/drivers/clk/ti/clk.c
+++ b/drivers/clk/ti/clk.c
@@ -33,6 +33,27 @@ static struct device_node *clocks_node_ptr[CLK_MAX_MEMMAPS];
struct ti_clk_features ti_clk_features;
/**
+ * ti_clk_setup_ll_ops - setup low level clock operations
+ * @ops: low level clock ops descriptor
+ *
+ * Sets up low level clock operations for TI clock driver. This is used
+ * to provide various callbacks for the clock driver towards platform
+ * specific code. Returns 0 on success, -EBUSY if ll_ops have been
+ * registered already.
+ */
+int ti_clk_setup_ll_ops(struct ti_clk_ll_ops *ops)
+{
+ if (ti_clk_ll_ops) {
+ pr_err("Attempt to register ll_ops multiple times.\n");
+ return -EBUSY;
+ }
+
+ ti_clk_ll_ops = ops;
+
+ return 0;
+}
+
+/**
* ti_dt_clocks_register - register DT alias clocks during boot
* @oclks: list of clocks to register
*
diff --git a/drivers/clk/ti/clock.h b/drivers/clk/ti/clock.h
index 3c43125..d4d232fd 100644
--- a/drivers/clk/ti/clock.h
+++ b/drivers/clk/ti/clock.h
@@ -280,4 +280,6 @@ long omap4_dpll_regm4xen_determine_rate(struct clk_hw *hw,
unsigned long *best_parent_rate,
struct clk_hw **best_parent_clk);
+extern struct ti_clk_ll_ops *ti_clk_ll_ops;
+
#endif
diff --git a/drivers/clk/ti/clockdomain.c b/drivers/clk/ti/clockdomain.c
index 61ef87b..80a7b69 100644
--- a/drivers/clk/ti/clockdomain.c
+++ b/drivers/clk/ti/clockdomain.c
@@ -21,6 +21,8 @@
#include <linux/of_address.h>
#include <linux/clk/ti.h>
+#include "clock.h"
+
#undef pr_fmt
#define pr_fmt(fmt) "%s: " fmt, __func__
diff --git a/include/linux/clk/ti.h b/include/linux/clk/ti.h
index 53fe38f..267cca0 100644
--- a/include/linux/clk/ti.h
+++ b/include/linux/clk/ti.h
@@ -235,8 +235,6 @@ struct ti_clk_ll_ops {
u8 *idlest_reg_id);
};
-extern struct ti_clk_ll_ops *ti_clk_ll_ops;
-
#define to_clk_hw_omap(_hw) container_of(_hw, struct clk_hw_omap, hw)
void omap2_init_clk_clkdm(struct clk_hw *clk);
@@ -255,6 +253,7 @@ unsigned long omap2_get_dpll_rate(struct clk_hw_omap *clk);
void ti_dt_clk_init_provider(struct device_node *np, int index);
void ti_dt_clk_init_retry_clks(void);
void ti_dt_clockdomains_setup(void);
+int ti_clk_setup_ll_ops(struct ti_clk_ll_ops *ops);
int omap3430_dt_clk_init(void);
int omap3630_dt_clk_init(void);
--
1.7.9.5
^ permalink raw reply related [flat|nested] 120+ messages in thread
* [PATCHv2 26/27] ARM: OMAP2+: clock: remove legacy omap2_clk_readl/writel APIs
2015-05-11 8:54 ` Tero Kristo
(?)
@ 2015-05-11 8:54 ` Tero Kristo
-1 siblings, 0 replies; 120+ messages in thread
From: Tero Kristo @ 2015-05-11 8:54 UTC (permalink / raw)
To: mturquette, tony, linux-omap, linux-clk, sboyd, paul; +Cc: linux-arm-kernel
As most of the clock driver code has migrated, these are no longer used
for anything. Thus remove these APIs completely.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
---
arch/arm/mach-omap2/clock.c | 16 ----------------
arch/arm/mach-omap2/clock.h | 3 ---
2 files changed, 19 deletions(-)
diff --git a/arch/arm/mach-omap2/clock.c b/arch/arm/mach-omap2/clock.c
index 40a88c2..79cec5f 100644
--- a/arch/arm/mach-omap2/clock.c
+++ b/arch/arm/mach-omap2/clock.c
@@ -87,22 +87,6 @@ static u32 clk_memmap_readl(void __iomem *reg)
return val;
}
-void omap2_clk_writel(u32 val, struct clk_hw_omap *clk, void __iomem *reg)
-{
- if (WARN_ON_ONCE(!(clk->flags & MEMMAP_ADDRESSING)))
- writel_relaxed(val, reg);
- else
- clk_memmap_writel(val, reg);
-}
-
-u32 omap2_clk_readl(struct clk_hw_omap *clk, void __iomem *reg)
-{
- if (WARN_ON_ONCE(!(clk->flags & MEMMAP_ADDRESSING)))
- return readl_relaxed(reg);
- else
- return clk_memmap_readl(reg);
-}
-
static struct ti_clk_ll_ops omap_clk_ll_ops = {
.clk_readl = clk_memmap_readl,
.clk_writel = clk_memmap_writel,
diff --git a/arch/arm/mach-omap2/clock.h b/arch/arm/mach-omap2/clock.h
index a7051d6..f3dc04c 100644
--- a/arch/arm/mach-omap2/clock.h
+++ b/arch/arm/mach-omap2/clock.h
@@ -68,9 +68,6 @@ void omap2_clk_print_new_rates(const char *hfclkin_ck_name,
const char *core_ck_name,
const char *mpu_ck_name);
-u32 omap2_clk_readl(struct clk_hw_omap *clk, void __iomem *reg);
-void omap2_clk_writel(u32 val, struct clk_hw_omap *clk, void __iomem *reg);
-
extern u16 cpu_mask;
extern const struct clkops clkops_omap2_dflt_wait;
--
1.7.9.5
^ permalink raw reply related [flat|nested] 120+ messages in thread
* [PATCHv2 26/27] ARM: OMAP2+: clock: remove legacy omap2_clk_readl/writel APIs
@ 2015-05-11 8:54 ` Tero Kristo
0 siblings, 0 replies; 120+ messages in thread
From: Tero Kristo @ 2015-05-11 8:54 UTC (permalink / raw)
To: mturquette, tony, linux-omap, linux-clk, sboyd, paul; +Cc: linux-arm-kernel
As most of the clock driver code has migrated, these are no longer used
for anything. Thus remove these APIs completely.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
---
arch/arm/mach-omap2/clock.c | 16 ----------------
arch/arm/mach-omap2/clock.h | 3 ---
2 files changed, 19 deletions(-)
diff --git a/arch/arm/mach-omap2/clock.c b/arch/arm/mach-omap2/clock.c
index 40a88c2..79cec5f 100644
--- a/arch/arm/mach-omap2/clock.c
+++ b/arch/arm/mach-omap2/clock.c
@@ -87,22 +87,6 @@ static u32 clk_memmap_readl(void __iomem *reg)
return val;
}
-void omap2_clk_writel(u32 val, struct clk_hw_omap *clk, void __iomem *reg)
-{
- if (WARN_ON_ONCE(!(clk->flags & MEMMAP_ADDRESSING)))
- writel_relaxed(val, reg);
- else
- clk_memmap_writel(val, reg);
-}
-
-u32 omap2_clk_readl(struct clk_hw_omap *clk, void __iomem *reg)
-{
- if (WARN_ON_ONCE(!(clk->flags & MEMMAP_ADDRESSING)))
- return readl_relaxed(reg);
- else
- return clk_memmap_readl(reg);
-}
-
static struct ti_clk_ll_ops omap_clk_ll_ops = {
.clk_readl = clk_memmap_readl,
.clk_writel = clk_memmap_writel,
diff --git a/arch/arm/mach-omap2/clock.h b/arch/arm/mach-omap2/clock.h
index a7051d6..f3dc04c 100644
--- a/arch/arm/mach-omap2/clock.h
+++ b/arch/arm/mach-omap2/clock.h
@@ -68,9 +68,6 @@ void omap2_clk_print_new_rates(const char *hfclkin_ck_name,
const char *core_ck_name,
const char *mpu_ck_name);
-u32 omap2_clk_readl(struct clk_hw_omap *clk, void __iomem *reg);
-void omap2_clk_writel(u32 val, struct clk_hw_omap *clk, void __iomem *reg);
-
extern u16 cpu_mask;
extern const struct clkops clkops_omap2_dflt_wait;
--
1.7.9.5
^ permalink raw reply related [flat|nested] 120+ messages in thread
* [PATCHv2 26/27] ARM: OMAP2+: clock: remove legacy omap2_clk_readl/writel APIs
@ 2015-05-11 8:54 ` Tero Kristo
0 siblings, 0 replies; 120+ messages in thread
From: Tero Kristo @ 2015-05-11 8:54 UTC (permalink / raw)
To: linux-arm-kernel
As most of the clock driver code has migrated, these are no longer used
for anything. Thus remove these APIs completely.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
---
arch/arm/mach-omap2/clock.c | 16 ----------------
arch/arm/mach-omap2/clock.h | 3 ---
2 files changed, 19 deletions(-)
diff --git a/arch/arm/mach-omap2/clock.c b/arch/arm/mach-omap2/clock.c
index 40a88c2..79cec5f 100644
--- a/arch/arm/mach-omap2/clock.c
+++ b/arch/arm/mach-omap2/clock.c
@@ -87,22 +87,6 @@ static u32 clk_memmap_readl(void __iomem *reg)
return val;
}
-void omap2_clk_writel(u32 val, struct clk_hw_omap *clk, void __iomem *reg)
-{
- if (WARN_ON_ONCE(!(clk->flags & MEMMAP_ADDRESSING)))
- writel_relaxed(val, reg);
- else
- clk_memmap_writel(val, reg);
-}
-
-u32 omap2_clk_readl(struct clk_hw_omap *clk, void __iomem *reg)
-{
- if (WARN_ON_ONCE(!(clk->flags & MEMMAP_ADDRESSING)))
- return readl_relaxed(reg);
- else
- return clk_memmap_readl(reg);
-}
-
static struct ti_clk_ll_ops omap_clk_ll_ops = {
.clk_readl = clk_memmap_readl,
.clk_writel = clk_memmap_writel,
diff --git a/arch/arm/mach-omap2/clock.h b/arch/arm/mach-omap2/clock.h
index a7051d6..f3dc04c 100644
--- a/arch/arm/mach-omap2/clock.h
+++ b/arch/arm/mach-omap2/clock.h
@@ -68,9 +68,6 @@ void omap2_clk_print_new_rates(const char *hfclkin_ck_name,
const char *core_ck_name,
const char *mpu_ck_name);
-u32 omap2_clk_readl(struct clk_hw_omap *clk, void __iomem *reg);
-void omap2_clk_writel(u32 val, struct clk_hw_omap *clk, void __iomem *reg);
-
extern u16 cpu_mask;
extern const struct clkops clkops_omap2_dflt_wait;
--
1.7.9.5
^ permalink raw reply related [flat|nested] 120+ messages in thread
* [PATCHv2 27/27] clk: ti: move low-level access and init code under clock driver
2015-05-11 8:54 ` Tero Kristo
(?)
@ 2015-05-11 8:54 ` Tero Kristo
-1 siblings, 0 replies; 120+ messages in thread
From: Tero Kristo @ 2015-05-11 8:54 UTC (permalink / raw)
To: mturquette, tony, linux-omap, linux-clk, sboyd, paul; +Cc: linux-arm-kernel
With most of the clock code under clock driver already, the low-level
register access code, and the init code for the same, is no longer
needed outside the clock driver. Thus, these can be moved under clock
driver also.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
---
arch/arm/mach-omap2/clock.c | 84 -------------------------------------------
arch/arm/mach-omap2/clock.h | 5 ---
drivers/clk/ti/clk.c | 75 ++++++++++++++++++++++++++++++++++++--
include/linux/clk/ti.h | 7 +++-
4 files changed, 78 insertions(+), 93 deletions(-)
diff --git a/arch/arm/mach-omap2/clock.c b/arch/arm/mach-omap2/clock.c
index 79cec5f..4340ba6 100644
--- a/arch/arm/mach-omap2/clock.c
+++ b/arch/arm/mach-omap2/clock.c
@@ -23,9 +23,7 @@
#include <linux/clk-provider.h>
#include <linux/io.h>
#include <linux/bitops.h>
-#include <linux/regmap.h>
#include <linux/of_address.h>
-#include <linux/bootmem.h>
#include <asm/cpu.h>
#include <trace/events/power.h>
@@ -55,41 +53,7 @@ u16 cpu_mask;
#define OMAP3PLUS_DPLL_FINT_MIN 32000
#define OMAP3PLUS_DPLL_FINT_MAX 52000000
-struct clk_iomap {
- struct regmap *regmap;
- void __iomem *mem;
-};
-
-static struct clk_iomap *clk_memmaps[CLK_MAX_MEMMAPS];
-
-static void clk_memmap_writel(u32 val, void __iomem *reg)
-{
- struct clk_omap_reg *r = (struct clk_omap_reg *)®
- struct clk_iomap *io = clk_memmaps[r->index];
-
- if (io->regmap)
- regmap_write(io->regmap, r->offset, val);
- else
- writel_relaxed(val, io->mem + r->offset);
-}
-
-static u32 clk_memmap_readl(void __iomem *reg)
-{
- u32 val;
- struct clk_omap_reg *r = (struct clk_omap_reg *)®
- struct clk_iomap *io = clk_memmaps[r->index];
-
- if (io->regmap)
- regmap_read(io->regmap, r->offset, &val);
- else
- val = readl_relaxed(io->mem + r->offset);
-
- return val;
-}
-
static struct ti_clk_ll_ops omap_clk_ll_ops = {
- .clk_readl = clk_memmap_readl,
- .clk_writel = clk_memmap_writel,
.clkdm_clk_enable = clkdm_clk_enable,
.clkdm_clk_disable = clkdm_clk_disable,
.cm_wait_module_ready = omap_cm_wait_module_ready,
@@ -109,54 +73,6 @@ int __init omap2_clk_setup_ll_ops(void)
return ti_clk_setup_ll_ops(&omap_clk_ll_ops);
}
-/**
- * omap2_clk_provider_init - initialize a clock provider
- * @match_table: DT device table to match for devices to init
- * @np: device node pointer for the this clock provider
- * @index: index for the clock provider
- + @syscon: syscon regmap pointer
- * @mem: iomem pointer for the clock provider memory area, only used if
- * syscon is not provided
- *
- * Initializes a clock provider module (CM/PRM etc.), registering
- * the memory mapping at specified index and initializing the
- * low level driver infrastructure. Returns 0 in success.
- */
-int __init omap2_clk_provider_init(struct device_node *np, int index,
- struct regmap *syscon, void __iomem *mem)
-{
- struct clk_iomap *io;
-
- io = kzalloc(sizeof(*io), GFP_KERNEL);
-
- io->regmap = syscon;
- io->mem = mem;
-
- clk_memmaps[index] = io;
-
- ti_dt_clk_init_provider(np, index);
-
- return 0;
-}
-
-/**
- * omap2_clk_legacy_provider_init - initialize a legacy clock provider
- * @index: index for the clock provider
- * @mem: iomem pointer for the clock provider memory area
- *
- * Initializes a legacy clock provider memory mapping.
- */
-void __init omap2_clk_legacy_provider_init(int index, void __iomem *mem)
-{
- struct clk_iomap *io;
-
- io = memblock_virt_alloc(sizeof(*io), 0);
-
- io->mem = mem;
-
- clk_memmaps[index] = io;
-}
-
/*
* OMAP2+ specific clock functions
*/
diff --git a/arch/arm/mach-omap2/clock.h b/arch/arm/mach-omap2/clock.h
index f3dc04c..67da640 100644
--- a/arch/arm/mach-omap2/clock.h
+++ b/arch/arm/mach-omap2/clock.h
@@ -75,11 +75,6 @@ extern const struct clkops clkops_omap2_dflt;
extern struct clk_functions omap2_clk_functions;
-struct regmap;
-
-int __init omap2_clk_provider_init(struct device_node *np, int index,
- struct regmap *syscon, void __iomem *mem);
-void __init omap2_clk_legacy_provider_init(int index, void __iomem *mem);
int __init omap2_clk_setup_ll_ops(void);
void __init ti_clk_init_features(void);
diff --git a/drivers/clk/ti/clk.c b/drivers/clk/ti/clk.c
index dc6b759..786ab59 100644
--- a/drivers/clk/ti/clk.c
+++ b/drivers/clk/ti/clk.c
@@ -21,6 +21,8 @@
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/list.h>
+#include <linux/regmap.h>
+#include <linux/bootmem.h>
#include "clock.h"
@@ -32,6 +34,38 @@ static struct device_node *clocks_node_ptr[CLK_MAX_MEMMAPS];
struct ti_clk_features ti_clk_features;
+struct clk_iomap {
+ struct regmap *regmap;
+ void __iomem *mem;
+};
+
+static struct clk_iomap *clk_memmaps[CLK_MAX_MEMMAPS];
+
+static void clk_memmap_writel(u32 val, void __iomem *reg)
+{
+ struct clk_omap_reg *r = (struct clk_omap_reg *)®
+ struct clk_iomap *io = clk_memmaps[r->index];
+
+ if (io->regmap)
+ regmap_write(io->regmap, r->offset, val);
+ else
+ writel_relaxed(val, io->mem + r->offset);
+}
+
+static u32 clk_memmap_readl(void __iomem *reg)
+{
+ u32 val;
+ struct clk_omap_reg *r = (struct clk_omap_reg *)®
+ struct clk_iomap *io = clk_memmaps[r->index];
+
+ if (io->regmap)
+ regmap_read(io->regmap, r->offset, &val);
+ else
+ val = readl_relaxed(io->mem + r->offset);
+
+ return val;
+}
+
/**
* ti_clk_setup_ll_ops - setup low level clock operations
* @ops: low level clock ops descriptor
@@ -49,6 +83,8 @@ int ti_clk_setup_ll_ops(struct ti_clk_ll_ops *ops)
}
ti_clk_ll_ops = ops;
+ ops->clk_readl = clk_memmap_readl;
+ ops->clk_writel = clk_memmap_writel;
return 0;
}
@@ -161,28 +197,61 @@ void __iomem *ti_clk_get_reg_addr(struct device_node *node, int index)
}
/**
- * ti_dt_clk_init_provider - init master clock provider
+ * omap2_clk_provider_init - init master clock provider
* @parent: master node
* @index: internal index for clk_reg_ops
+ * @syscon: syscon regmap pointer for accessing clock registers
+ * @mem: iomem pointer for the clock provider memory area, only used if
+ * syscon is not provided
*
* Initializes a master clock IP block. This basically sets up the
* mapping from clocks node to the memory map index. All the clocks
* are then initialized through the common of_clk_init call, and the
* clocks will access their memory maps based on the node layout.
+ * Returns 0 in success.
*/
-void ti_dt_clk_init_provider(struct device_node *parent, int index)
+int __init omap2_clk_provider_init(struct device_node *parent, int index,
+ struct regmap *syscon, void __iomem *mem)
{
struct device_node *clocks;
+ struct clk_iomap *io;
/* get clocks for this parent */
clocks = of_get_child_by_name(parent, "clocks");
if (!clocks) {
pr_err("%s missing 'clocks' child node.\n", parent->name);
- return;
+ return -EINVAL;
}
/* add clocks node info */
clocks_node_ptr[index] = clocks;
+
+ io = kzalloc(sizeof(*io), GFP_KERNEL);
+
+ io->regmap = syscon;
+ io->mem = mem;
+
+ clk_memmaps[index] = io;
+
+ return 0;
+}
+
+/**
+ * omap2_clk_legacy_provider_init - initialize a legacy clock provider
+ * @index: index for the clock provider
+ * @mem: iomem pointer for the clock provider memory area
+ *
+ * Initializes a legacy clock provider memory mapping.
+ */
+void __init omap2_clk_legacy_provider_init(int index, void __iomem *mem)
+{
+ struct clk_iomap *io;
+
+ io = memblock_virt_alloc(sizeof(*io), 0);
+
+ io->mem = mem;
+
+ clk_memmaps[index] = io;
}
/**
diff --git a/include/linux/clk/ti.h b/include/linux/clk/ti.h
index 267cca0..f183825 100644
--- a/include/linux/clk/ti.h
+++ b/include/linux/clk/ti.h
@@ -250,11 +250,16 @@ void omap2xxx_clkt_dpllcore_init(struct clk_hw *hw);
void omap2xxx_clkt_vps_init(void);
unsigned long omap2_get_dpll_rate(struct clk_hw_omap *clk);
-void ti_dt_clk_init_provider(struct device_node *np, int index);
void ti_dt_clk_init_retry_clks(void);
void ti_dt_clockdomains_setup(void);
int ti_clk_setup_ll_ops(struct ti_clk_ll_ops *ops);
+struct regmap;
+
+int omap2_clk_provider_init(struct device_node *parent, int index,
+ struct regmap *syscon, void __iomem *mem);
+void omap2_clk_legacy_provider_init(int index, void __iomem *mem);
+
int omap3430_dt_clk_init(void);
int omap3630_dt_clk_init(void);
int am35xx_dt_clk_init(void);
--
1.7.9.5
^ permalink raw reply related [flat|nested] 120+ messages in thread
* [PATCHv2 27/27] clk: ti: move low-level access and init code under clock driver
@ 2015-05-11 8:54 ` Tero Kristo
0 siblings, 0 replies; 120+ messages in thread
From: Tero Kristo @ 2015-05-11 8:54 UTC (permalink / raw)
To: mturquette, tony, linux-omap, linux-clk, sboyd, paul; +Cc: linux-arm-kernel
With most of the clock code under clock driver already, the low-level
register access code, and the init code for the same, is no longer
needed outside the clock driver. Thus, these can be moved under clock
driver also.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
---
arch/arm/mach-omap2/clock.c | 84 -------------------------------------------
arch/arm/mach-omap2/clock.h | 5 ---
drivers/clk/ti/clk.c | 75 ++++++++++++++++++++++++++++++++++++--
include/linux/clk/ti.h | 7 +++-
4 files changed, 78 insertions(+), 93 deletions(-)
diff --git a/arch/arm/mach-omap2/clock.c b/arch/arm/mach-omap2/clock.c
index 79cec5f..4340ba6 100644
--- a/arch/arm/mach-omap2/clock.c
+++ b/arch/arm/mach-omap2/clock.c
@@ -23,9 +23,7 @@
#include <linux/clk-provider.h>
#include <linux/io.h>
#include <linux/bitops.h>
-#include <linux/regmap.h>
#include <linux/of_address.h>
-#include <linux/bootmem.h>
#include <asm/cpu.h>
#include <trace/events/power.h>
@@ -55,41 +53,7 @@ u16 cpu_mask;
#define OMAP3PLUS_DPLL_FINT_MIN 32000
#define OMAP3PLUS_DPLL_FINT_MAX 52000000
-struct clk_iomap {
- struct regmap *regmap;
- void __iomem *mem;
-};
-
-static struct clk_iomap *clk_memmaps[CLK_MAX_MEMMAPS];
-
-static void clk_memmap_writel(u32 val, void __iomem *reg)
-{
- struct clk_omap_reg *r = (struct clk_omap_reg *)®
- struct clk_iomap *io = clk_memmaps[r->index];
-
- if (io->regmap)
- regmap_write(io->regmap, r->offset, val);
- else
- writel_relaxed(val, io->mem + r->offset);
-}
-
-static u32 clk_memmap_readl(void __iomem *reg)
-{
- u32 val;
- struct clk_omap_reg *r = (struct clk_omap_reg *)®
- struct clk_iomap *io = clk_memmaps[r->index];
-
- if (io->regmap)
- regmap_read(io->regmap, r->offset, &val);
- else
- val = readl_relaxed(io->mem + r->offset);
-
- return val;
-}
-
static struct ti_clk_ll_ops omap_clk_ll_ops = {
- .clk_readl = clk_memmap_readl,
- .clk_writel = clk_memmap_writel,
.clkdm_clk_enable = clkdm_clk_enable,
.clkdm_clk_disable = clkdm_clk_disable,
.cm_wait_module_ready = omap_cm_wait_module_ready,
@@ -109,54 +73,6 @@ int __init omap2_clk_setup_ll_ops(void)
return ti_clk_setup_ll_ops(&omap_clk_ll_ops);
}
-/**
- * omap2_clk_provider_init - initialize a clock provider
- * @match_table: DT device table to match for devices to init
- * @np: device node pointer for the this clock provider
- * @index: index for the clock provider
- + @syscon: syscon regmap pointer
- * @mem: iomem pointer for the clock provider memory area, only used if
- * syscon is not provided
- *
- * Initializes a clock provider module (CM/PRM etc.), registering
- * the memory mapping at specified index and initializing the
- * low level driver infrastructure. Returns 0 in success.
- */
-int __init omap2_clk_provider_init(struct device_node *np, int index,
- struct regmap *syscon, void __iomem *mem)
-{
- struct clk_iomap *io;
-
- io = kzalloc(sizeof(*io), GFP_KERNEL);
-
- io->regmap = syscon;
- io->mem = mem;
-
- clk_memmaps[index] = io;
-
- ti_dt_clk_init_provider(np, index);
-
- return 0;
-}
-
-/**
- * omap2_clk_legacy_provider_init - initialize a legacy clock provider
- * @index: index for the clock provider
- * @mem: iomem pointer for the clock provider memory area
- *
- * Initializes a legacy clock provider memory mapping.
- */
-void __init omap2_clk_legacy_provider_init(int index, void __iomem *mem)
-{
- struct clk_iomap *io;
-
- io = memblock_virt_alloc(sizeof(*io), 0);
-
- io->mem = mem;
-
- clk_memmaps[index] = io;
-}
-
/*
* OMAP2+ specific clock functions
*/
diff --git a/arch/arm/mach-omap2/clock.h b/arch/arm/mach-omap2/clock.h
index f3dc04c..67da640 100644
--- a/arch/arm/mach-omap2/clock.h
+++ b/arch/arm/mach-omap2/clock.h
@@ -75,11 +75,6 @@ extern const struct clkops clkops_omap2_dflt;
extern struct clk_functions omap2_clk_functions;
-struct regmap;
-
-int __init omap2_clk_provider_init(struct device_node *np, int index,
- struct regmap *syscon, void __iomem *mem);
-void __init omap2_clk_legacy_provider_init(int index, void __iomem *mem);
int __init omap2_clk_setup_ll_ops(void);
void __init ti_clk_init_features(void);
diff --git a/drivers/clk/ti/clk.c b/drivers/clk/ti/clk.c
index dc6b759..786ab59 100644
--- a/drivers/clk/ti/clk.c
+++ b/drivers/clk/ti/clk.c
@@ -21,6 +21,8 @@
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/list.h>
+#include <linux/regmap.h>
+#include <linux/bootmem.h>
#include "clock.h"
@@ -32,6 +34,38 @@ static struct device_node *clocks_node_ptr[CLK_MAX_MEMMAPS];
struct ti_clk_features ti_clk_features;
+struct clk_iomap {
+ struct regmap *regmap;
+ void __iomem *mem;
+};
+
+static struct clk_iomap *clk_memmaps[CLK_MAX_MEMMAPS];
+
+static void clk_memmap_writel(u32 val, void __iomem *reg)
+{
+ struct clk_omap_reg *r = (struct clk_omap_reg *)®
+ struct clk_iomap *io = clk_memmaps[r->index];
+
+ if (io->regmap)
+ regmap_write(io->regmap, r->offset, val);
+ else
+ writel_relaxed(val, io->mem + r->offset);
+}
+
+static u32 clk_memmap_readl(void __iomem *reg)
+{
+ u32 val;
+ struct clk_omap_reg *r = (struct clk_omap_reg *)®
+ struct clk_iomap *io = clk_memmaps[r->index];
+
+ if (io->regmap)
+ regmap_read(io->regmap, r->offset, &val);
+ else
+ val = readl_relaxed(io->mem + r->offset);
+
+ return val;
+}
+
/**
* ti_clk_setup_ll_ops - setup low level clock operations
* @ops: low level clock ops descriptor
@@ -49,6 +83,8 @@ int ti_clk_setup_ll_ops(struct ti_clk_ll_ops *ops)
}
ti_clk_ll_ops = ops;
+ ops->clk_readl = clk_memmap_readl;
+ ops->clk_writel = clk_memmap_writel;
return 0;
}
@@ -161,28 +197,61 @@ void __iomem *ti_clk_get_reg_addr(struct device_node *node, int index)
}
/**
- * ti_dt_clk_init_provider - init master clock provider
+ * omap2_clk_provider_init - init master clock provider
* @parent: master node
* @index: internal index for clk_reg_ops
+ * @syscon: syscon regmap pointer for accessing clock registers
+ * @mem: iomem pointer for the clock provider memory area, only used if
+ * syscon is not provided
*
* Initializes a master clock IP block. This basically sets up the
* mapping from clocks node to the memory map index. All the clocks
* are then initialized through the common of_clk_init call, and the
* clocks will access their memory maps based on the node layout.
+ * Returns 0 in success.
*/
-void ti_dt_clk_init_provider(struct device_node *parent, int index)
+int __init omap2_clk_provider_init(struct device_node *parent, int index,
+ struct regmap *syscon, void __iomem *mem)
{
struct device_node *clocks;
+ struct clk_iomap *io;
/* get clocks for this parent */
clocks = of_get_child_by_name(parent, "clocks");
if (!clocks) {
pr_err("%s missing 'clocks' child node.\n", parent->name);
- return;
+ return -EINVAL;
}
/* add clocks node info */
clocks_node_ptr[index] = clocks;
+
+ io = kzalloc(sizeof(*io), GFP_KERNEL);
+
+ io->regmap = syscon;
+ io->mem = mem;
+
+ clk_memmaps[index] = io;
+
+ return 0;
+}
+
+/**
+ * omap2_clk_legacy_provider_init - initialize a legacy clock provider
+ * @index: index for the clock provider
+ * @mem: iomem pointer for the clock provider memory area
+ *
+ * Initializes a legacy clock provider memory mapping.
+ */
+void __init omap2_clk_legacy_provider_init(int index, void __iomem *mem)
+{
+ struct clk_iomap *io;
+
+ io = memblock_virt_alloc(sizeof(*io), 0);
+
+ io->mem = mem;
+
+ clk_memmaps[index] = io;
}
/**
diff --git a/include/linux/clk/ti.h b/include/linux/clk/ti.h
index 267cca0..f183825 100644
--- a/include/linux/clk/ti.h
+++ b/include/linux/clk/ti.h
@@ -250,11 +250,16 @@ void omap2xxx_clkt_dpllcore_init(struct clk_hw *hw);
void omap2xxx_clkt_vps_init(void);
unsigned long omap2_get_dpll_rate(struct clk_hw_omap *clk);
-void ti_dt_clk_init_provider(struct device_node *np, int index);
void ti_dt_clk_init_retry_clks(void);
void ti_dt_clockdomains_setup(void);
int ti_clk_setup_ll_ops(struct ti_clk_ll_ops *ops);
+struct regmap;
+
+int omap2_clk_provider_init(struct device_node *parent, int index,
+ struct regmap *syscon, void __iomem *mem);
+void omap2_clk_legacy_provider_init(int index, void __iomem *mem);
+
int omap3430_dt_clk_init(void);
int omap3630_dt_clk_init(void);
int am35xx_dt_clk_init(void);
--
1.7.9.5
^ permalink raw reply related [flat|nested] 120+ messages in thread
* [PATCHv2 27/27] clk: ti: move low-level access and init code under clock driver
@ 2015-05-11 8:54 ` Tero Kristo
0 siblings, 0 replies; 120+ messages in thread
From: Tero Kristo @ 2015-05-11 8:54 UTC (permalink / raw)
To: linux-arm-kernel
With most of the clock code under clock driver already, the low-level
register access code, and the init code for the same, is no longer
needed outside the clock driver. Thus, these can be moved under clock
driver also.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
---
arch/arm/mach-omap2/clock.c | 84 -------------------------------------------
arch/arm/mach-omap2/clock.h | 5 ---
drivers/clk/ti/clk.c | 75 ++++++++++++++++++++++++++++++++++++--
include/linux/clk/ti.h | 7 +++-
4 files changed, 78 insertions(+), 93 deletions(-)
diff --git a/arch/arm/mach-omap2/clock.c b/arch/arm/mach-omap2/clock.c
index 79cec5f..4340ba6 100644
--- a/arch/arm/mach-omap2/clock.c
+++ b/arch/arm/mach-omap2/clock.c
@@ -23,9 +23,7 @@
#include <linux/clk-provider.h>
#include <linux/io.h>
#include <linux/bitops.h>
-#include <linux/regmap.h>
#include <linux/of_address.h>
-#include <linux/bootmem.h>
#include <asm/cpu.h>
#include <trace/events/power.h>
@@ -55,41 +53,7 @@ u16 cpu_mask;
#define OMAP3PLUS_DPLL_FINT_MIN 32000
#define OMAP3PLUS_DPLL_FINT_MAX 52000000
-struct clk_iomap {
- struct regmap *regmap;
- void __iomem *mem;
-};
-
-static struct clk_iomap *clk_memmaps[CLK_MAX_MEMMAPS];
-
-static void clk_memmap_writel(u32 val, void __iomem *reg)
-{
- struct clk_omap_reg *r = (struct clk_omap_reg *)®
- struct clk_iomap *io = clk_memmaps[r->index];
-
- if (io->regmap)
- regmap_write(io->regmap, r->offset, val);
- else
- writel_relaxed(val, io->mem + r->offset);
-}
-
-static u32 clk_memmap_readl(void __iomem *reg)
-{
- u32 val;
- struct clk_omap_reg *r = (struct clk_omap_reg *)®
- struct clk_iomap *io = clk_memmaps[r->index];
-
- if (io->regmap)
- regmap_read(io->regmap, r->offset, &val);
- else
- val = readl_relaxed(io->mem + r->offset);
-
- return val;
-}
-
static struct ti_clk_ll_ops omap_clk_ll_ops = {
- .clk_readl = clk_memmap_readl,
- .clk_writel = clk_memmap_writel,
.clkdm_clk_enable = clkdm_clk_enable,
.clkdm_clk_disable = clkdm_clk_disable,
.cm_wait_module_ready = omap_cm_wait_module_ready,
@@ -109,54 +73,6 @@ int __init omap2_clk_setup_ll_ops(void)
return ti_clk_setup_ll_ops(&omap_clk_ll_ops);
}
-/**
- * omap2_clk_provider_init - initialize a clock provider
- * @match_table: DT device table to match for devices to init
- * @np: device node pointer for the this clock provider
- * @index: index for the clock provider
- + @syscon: syscon regmap pointer
- * @mem: iomem pointer for the clock provider memory area, only used if
- * syscon is not provided
- *
- * Initializes a clock provider module (CM/PRM etc.), registering
- * the memory mapping at specified index and initializing the
- * low level driver infrastructure. Returns 0 in success.
- */
-int __init omap2_clk_provider_init(struct device_node *np, int index,
- struct regmap *syscon, void __iomem *mem)
-{
- struct clk_iomap *io;
-
- io = kzalloc(sizeof(*io), GFP_KERNEL);
-
- io->regmap = syscon;
- io->mem = mem;
-
- clk_memmaps[index] = io;
-
- ti_dt_clk_init_provider(np, index);
-
- return 0;
-}
-
-/**
- * omap2_clk_legacy_provider_init - initialize a legacy clock provider
- * @index: index for the clock provider
- * @mem: iomem pointer for the clock provider memory area
- *
- * Initializes a legacy clock provider memory mapping.
- */
-void __init omap2_clk_legacy_provider_init(int index, void __iomem *mem)
-{
- struct clk_iomap *io;
-
- io = memblock_virt_alloc(sizeof(*io), 0);
-
- io->mem = mem;
-
- clk_memmaps[index] = io;
-}
-
/*
* OMAP2+ specific clock functions
*/
diff --git a/arch/arm/mach-omap2/clock.h b/arch/arm/mach-omap2/clock.h
index f3dc04c..67da640 100644
--- a/arch/arm/mach-omap2/clock.h
+++ b/arch/arm/mach-omap2/clock.h
@@ -75,11 +75,6 @@ extern const struct clkops clkops_omap2_dflt;
extern struct clk_functions omap2_clk_functions;
-struct regmap;
-
-int __init omap2_clk_provider_init(struct device_node *np, int index,
- struct regmap *syscon, void __iomem *mem);
-void __init omap2_clk_legacy_provider_init(int index, void __iomem *mem);
int __init omap2_clk_setup_ll_ops(void);
void __init ti_clk_init_features(void);
diff --git a/drivers/clk/ti/clk.c b/drivers/clk/ti/clk.c
index dc6b759..786ab59 100644
--- a/drivers/clk/ti/clk.c
+++ b/drivers/clk/ti/clk.c
@@ -21,6 +21,8 @@
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/list.h>
+#include <linux/regmap.h>
+#include <linux/bootmem.h>
#include "clock.h"
@@ -32,6 +34,38 @@ static struct device_node *clocks_node_ptr[CLK_MAX_MEMMAPS];
struct ti_clk_features ti_clk_features;
+struct clk_iomap {
+ struct regmap *regmap;
+ void __iomem *mem;
+};
+
+static struct clk_iomap *clk_memmaps[CLK_MAX_MEMMAPS];
+
+static void clk_memmap_writel(u32 val, void __iomem *reg)
+{
+ struct clk_omap_reg *r = (struct clk_omap_reg *)®
+ struct clk_iomap *io = clk_memmaps[r->index];
+
+ if (io->regmap)
+ regmap_write(io->regmap, r->offset, val);
+ else
+ writel_relaxed(val, io->mem + r->offset);
+}
+
+static u32 clk_memmap_readl(void __iomem *reg)
+{
+ u32 val;
+ struct clk_omap_reg *r = (struct clk_omap_reg *)®
+ struct clk_iomap *io = clk_memmaps[r->index];
+
+ if (io->regmap)
+ regmap_read(io->regmap, r->offset, &val);
+ else
+ val = readl_relaxed(io->mem + r->offset);
+
+ return val;
+}
+
/**
* ti_clk_setup_ll_ops - setup low level clock operations
* @ops: low level clock ops descriptor
@@ -49,6 +83,8 @@ int ti_clk_setup_ll_ops(struct ti_clk_ll_ops *ops)
}
ti_clk_ll_ops = ops;
+ ops->clk_readl = clk_memmap_readl;
+ ops->clk_writel = clk_memmap_writel;
return 0;
}
@@ -161,28 +197,61 @@ void __iomem *ti_clk_get_reg_addr(struct device_node *node, int index)
}
/**
- * ti_dt_clk_init_provider - init master clock provider
+ * omap2_clk_provider_init - init master clock provider
* @parent: master node
* @index: internal index for clk_reg_ops
+ * @syscon: syscon regmap pointer for accessing clock registers
+ * @mem: iomem pointer for the clock provider memory area, only used if
+ * syscon is not provided
*
* Initializes a master clock IP block. This basically sets up the
* mapping from clocks node to the memory map index. All the clocks
* are then initialized through the common of_clk_init call, and the
* clocks will access their memory maps based on the node layout.
+ * Returns 0 in success.
*/
-void ti_dt_clk_init_provider(struct device_node *parent, int index)
+int __init omap2_clk_provider_init(struct device_node *parent, int index,
+ struct regmap *syscon, void __iomem *mem)
{
struct device_node *clocks;
+ struct clk_iomap *io;
/* get clocks for this parent */
clocks = of_get_child_by_name(parent, "clocks");
if (!clocks) {
pr_err("%s missing 'clocks' child node.\n", parent->name);
- return;
+ return -EINVAL;
}
/* add clocks node info */
clocks_node_ptr[index] = clocks;
+
+ io = kzalloc(sizeof(*io), GFP_KERNEL);
+
+ io->regmap = syscon;
+ io->mem = mem;
+
+ clk_memmaps[index] = io;
+
+ return 0;
+}
+
+/**
+ * omap2_clk_legacy_provider_init - initialize a legacy clock provider
+ * @index: index for the clock provider
+ * @mem: iomem pointer for the clock provider memory area
+ *
+ * Initializes a legacy clock provider memory mapping.
+ */
+void __init omap2_clk_legacy_provider_init(int index, void __iomem *mem)
+{
+ struct clk_iomap *io;
+
+ io = memblock_virt_alloc(sizeof(*io), 0);
+
+ io->mem = mem;
+
+ clk_memmaps[index] = io;
}
/**
diff --git a/include/linux/clk/ti.h b/include/linux/clk/ti.h
index 267cca0..f183825 100644
--- a/include/linux/clk/ti.h
+++ b/include/linux/clk/ti.h
@@ -250,11 +250,16 @@ void omap2xxx_clkt_dpllcore_init(struct clk_hw *hw);
void omap2xxx_clkt_vps_init(void);
unsigned long omap2_get_dpll_rate(struct clk_hw_omap *clk);
-void ti_dt_clk_init_provider(struct device_node *np, int index);
void ti_dt_clk_init_retry_clks(void);
void ti_dt_clockdomains_setup(void);
int ti_clk_setup_ll_ops(struct ti_clk_ll_ops *ops);
+struct regmap;
+
+int omap2_clk_provider_init(struct device_node *parent, int index,
+ struct regmap *syscon, void __iomem *mem);
+void omap2_clk_legacy_provider_init(int index, void __iomem *mem);
+
int omap3430_dt_clk_init(void);
int omap3630_dt_clk_init(void);
int am35xx_dt_clk_init(void);
--
1.7.9.5
^ permalink raw reply related [flat|nested] 120+ messages in thread
* Re: [PATCHv2 00/27] ARM: OMAP2+: clock code migration to drivers/clk/ti
2015-05-11 8:54 ` Tero Kristo
@ 2015-05-11 20:21 ` Paul Walmsley
-1 siblings, 0 replies; 120+ messages in thread
From: Paul Walmsley @ 2015-05-11 20:21 UTC (permalink / raw)
To: Tero Kristo
Cc: mturquette, tony, linux-omap, linux-clk, sboyd, linux-arm-kernel
Hi
On Mon, 11 May 2015, Tero Kristo wrote:
> This set moves most of the OMAP2+ clock driver code under drivers/clk.
> There are still a couple of files under mach-omap2 folder after this
> set which have either unmet dependencies still (towards PRCM driver)
> or is currently slightly broken (some of the DVFS code for OMAP2/OMAP3.)
> Earlier version of this set has been posted back in March (see
> http://www.spinics.net/lists/linux-omap/msg116418.html), mostly
> the code is the same except patches 25+ which are new.
>
> Overall diffstat for this set:
> 42 files changed, 2644 insertions(+), 3707 deletions(-)
>
> Testing done:
> am335x-evm : boot
> am335x-evmsk : boot
> am3517-evm : boot
> am37x-evm : boot
> am43x-epos-evm : boot
> am437x-gp-evm : boot
> omap3-beagle-xm : boot
> omap3-beagle : boot, suspend-resume (ret/off), cpuidle (ret/off)
> am335x-boneblack: boot
> am335x-bone : boot
> craneboard : boot
> dra7xx-evm : boot
> omap3430-ldp : boot
> omap3-n900 : boot
> omap5-uevm : boot
> omap4-panda-es : boot, suspend-resume (ret), cpuidle (ret)
> omap4-panda : boot
> omap2430-sdp : boot
> omap3430-sdp : boot
> omap4-sdp-es23plus: boot
>
> Branch info:
> - tree: https://github.com/t-kristo/linux-pm.git
> - branch: for-4.2/ti-clk-move
I can't replicate your test results. Several Kconfigs fail to build here,
and many boards don't even boot.
Could you please post a copy of your boot logs?
- Paul
http://www.pwsan.com/omap/testlogs/test-tkristo-clk-move-v4.2/20150511115145/
OMAP development test results for test-tkristo-clk-move-v4.2 20150511115145
Test summary
------------
Build: uImage:
Pass ( 3/ 3): omap1_defconfig, omap1_defconfig_1510innovator_only,
omap1_defconfig_5912osk_only
Build: uImage+dtb:
FAIL ( 2/13): omap2plus_defconfig_am33xx_only/am335x-bone,
omap2plus_defconfig_n800_only_a/omap2420-n800
Pass (11/13): omap2plus_defconfig/omap4-panda,
omap2plus_defconfig/omap4-panda-es,
omap2plus_defconfig/omap4-var-som,
omap2plus_defconfig/omap3-evm-37xx,
omap2plus_defconfig/omap2430-sdp,
omap2plus_defconfig/am3517-evm,
omap2plus_defconfig/omap3-beagle,
omap2plus_defconfig/omap3-beagle-xm,
omap2plus_defconfig/omap3-sbc-t3517,
omap2plus_defconfig/omap5-uevm,
omap2plus_defconfig/omap5-sbc-t54
Build: zImage:
FAIL ( 9/17): omap2plus_defconfig_am33xx_only,
omap2plus_defconfig_n800_only_a,
omap2plus_defconfig_n800_multi_omap2xxx,
omap2plus_defconfig_omap2_4_only,
omap2plus_defconfig_omap5_only,
omap2plus_defconfig_dra7xx_only,
omap2plus_defconfig_am43xx_only,
rmk_omap4430_sdp_oldconfig,
rmk_omap4430_sdp_allnoconfig
Pass ( 8/17): omap2plus_defconfig,
omap2plus_defconfig_2430sdp_only,
omap2plus_defconfig_cpupm, omap2plus_defconfig_no_pm,
omap2plus_defconfig_omap3_4_only,
rmk_omap3430_ldp_oldconfig,
rmk_omap3430_ldp_allnoconfig, multi_v7_defconfig
Build warnings from toolchain: uImage:
FAIL ( 3/ 3): omap1_defconfig, omap1_defconfig_1510innovator_only,
omap1_defconfig_5912osk_only
Build warnings from toolchain: uImage+dtb:
FAIL ( 2/13): omap2plus_defconfig_am33xx_only/am335x-bone,
omap2plus_defconfig_n800_only_a/omap2420-n800
Build warnings from toolchain: zImage:
FAIL (14/17): omap2plus_defconfig, omap2plus_defconfig_am33xx_only,
omap2plus_defconfig_n800_only_a,
omap2plus_defconfig_n800_multi_omap2xxx,
omap2plus_defconfig_2430sdp_only,
omap2plus_defconfig_cpupm, omap2plus_defconfig_no_pm,
omap2plus_defconfig_omap2_4_only,
omap2plus_defconfig_omap3_4_only,
omap2plus_defconfig_omap5_only,
omap2plus_defconfig_dra7xx_only,
omap2plus_defconfig_am43xx_only,
rmk_omap3430_ldp_oldconfig,
rmk_omap4430_sdp_oldconfig
Boot to userspace:
FAIL ( 6/17): 4460varsomom, 2430sdp, 3530es3beagle, 3530es31beagle,
cmt3517, 5430es2sbct54
skip ( 5/17): 5912osk, 3517evm, am335xbonelt, am335xbone, 2420n800
Pass ( 6/17): 4430es2panda, 4460pandaes, 37xxevm, 3730beaglexm,
3730es12beaglexm, 5430es2uevm
Kernel warnings during boot to userspace:
FAIL ( 1/17): 4430es2panda
PM: chip retention via suspend:
skip ( 1/12): am335xbonelt
FAIL ( 7/12): 4430es2panda, 4460varsomom, 3530es3beagle,
3530es31beagle, 2430sdp, 5430es2uevm, 5430es2sbct54
Pass ( 4/12): 4460pandaes, 37xxevm, 3730beaglexm, 3730es12beaglexm
PM: chip retention via dynamic idle:
skip ( 1/12): am335xbonelt
FAIL ( 7/12): 4430es2panda, 4460varsomom, 3530es3beagle,
3530es31beagle, 2430sdp, 5430es2uevm, 5430es2sbct54
Pass ( 4/12): 4460pandaes, 37xxevm, 3730beaglexm, 3730es12beaglexm
PM: chip off (except CORE, due to errata) via suspend:
Pass ( 1/ 1): 3730beaglexm
PM: chip off (except CORE, due to errata) via dynamic idle:
Pass ( 1/ 1): 3730beaglexm
PM: chip off via suspend:
FAIL ( 2/ 4): 3530es3beagle, 3530es31beagle
Pass ( 2/ 4): 37xxevm, 3730es12beaglexm
PM: chip off via dynamic idle:
FAIL ( 2/ 4): 3530es3beagle, 3530es31beagle
Pass ( 2/ 4): 37xxevm, 3730es12beaglexm
Kernel warnings during PM test:
FAIL ( 1/17): 4430es2panda
Obsolete Kconfig symbols:
FAIL ( 1/20): multi_v7_defconfig
vmlinux object size
(delta in bytes from test_v4.1-rc2 (5ebe6afaf0057ac3eaeb98defd5456894b446d22)):
text data bss total kernel
0 0 0 0 omap1_defconfig
0 0 0 0 omap1_defconfig_1510innovator_only
0 0 0 0 omap1_defconfig_5912osk_only
-1484 -8 0 -1492 multi_v7_defconfig
-2108 +56 0 -2052 omap2plus_defconfig
0 0 0 0 omap2plus_defconfig_2430sdp_only
-6140 +56 -64 -6148 omap2plus_defconfig_cpupm
-6204 -8 0 -6212 omap2plus_defconfig_no_pm
-1908 -8 0 -1916 omap2plus_defconfig_omap3_4_only
-2804 -4 +780 -2028 rmk_omap3430_ldp_allnoconfig
-1812 -8 +64 -1756 rmk_omap3430_ldp_oldconfig
Boot-time memory difference
(delta in bytes from test_v4.1-rc2 (5ebe6afaf0057ac3eaeb98defd5456894b446d22))
avail rsrvd high freed board kconfig
-117644k -13428k . -168k 2420n800 omap2plus_defconfig_n800_only_a
-4k 4k . . 5430es2sbct54 omap2plus_defconfig
-79556k -51516k . -364k am335xbone omap2plus_defconfig_am33xx_only
-224000k -37120k . -440k am335xbonelt omap2plus_defconfig
^ permalink raw reply [flat|nested] 120+ messages in thread
* [PATCHv2 00/27] ARM: OMAP2+: clock code migration to drivers/clk/ti
@ 2015-05-11 20:21 ` Paul Walmsley
0 siblings, 0 replies; 120+ messages in thread
From: Paul Walmsley @ 2015-05-11 20:21 UTC (permalink / raw)
To: linux-arm-kernel
Hi
On Mon, 11 May 2015, Tero Kristo wrote:
> This set moves most of the OMAP2+ clock driver code under drivers/clk.
> There are still a couple of files under mach-omap2 folder after this
> set which have either unmet dependencies still (towards PRCM driver)
> or is currently slightly broken (some of the DVFS code for OMAP2/OMAP3.)
> Earlier version of this set has been posted back in March (see
> http://www.spinics.net/lists/linux-omap/msg116418.html), mostly
> the code is the same except patches 25+ which are new.
>
> Overall diffstat for this set:
> 42 files changed, 2644 insertions(+), 3707 deletions(-)
>
> Testing done:
> am335x-evm : boot
> am335x-evmsk : boot
> am3517-evm : boot
> am37x-evm : boot
> am43x-epos-evm : boot
> am437x-gp-evm : boot
> omap3-beagle-xm : boot
> omap3-beagle : boot, suspend-resume (ret/off), cpuidle (ret/off)
> am335x-boneblack: boot
> am335x-bone : boot
> craneboard : boot
> dra7xx-evm : boot
> omap3430-ldp : boot
> omap3-n900 : boot
> omap5-uevm : boot
> omap4-panda-es : boot, suspend-resume (ret), cpuidle (ret)
> omap4-panda : boot
> omap2430-sdp : boot
> omap3430-sdp : boot
> omap4-sdp-es23plus: boot
>
> Branch info:
> - tree: https://github.com/t-kristo/linux-pm.git
> - branch: for-4.2/ti-clk-move
I can't replicate your test results. Several Kconfigs fail to build here,
and many boards don't even boot.
Could you please post a copy of your boot logs?
- Paul
http://www.pwsan.com/omap/testlogs/test-tkristo-clk-move-v4.2/20150511115145/
OMAP development test results for test-tkristo-clk-move-v4.2 20150511115145
Test summary
------------
Build: uImage:
Pass ( 3/ 3): omap1_defconfig, omap1_defconfig_1510innovator_only,
omap1_defconfig_5912osk_only
Build: uImage+dtb:
FAIL ( 2/13): omap2plus_defconfig_am33xx_only/am335x-bone,
omap2plus_defconfig_n800_only_a/omap2420-n800
Pass (11/13): omap2plus_defconfig/omap4-panda,
omap2plus_defconfig/omap4-panda-es,
omap2plus_defconfig/omap4-var-som,
omap2plus_defconfig/omap3-evm-37xx,
omap2plus_defconfig/omap2430-sdp,
omap2plus_defconfig/am3517-evm,
omap2plus_defconfig/omap3-beagle,
omap2plus_defconfig/omap3-beagle-xm,
omap2plus_defconfig/omap3-sbc-t3517,
omap2plus_defconfig/omap5-uevm,
omap2plus_defconfig/omap5-sbc-t54
Build: zImage:
FAIL ( 9/17): omap2plus_defconfig_am33xx_only,
omap2plus_defconfig_n800_only_a,
omap2plus_defconfig_n800_multi_omap2xxx,
omap2plus_defconfig_omap2_4_only,
omap2plus_defconfig_omap5_only,
omap2plus_defconfig_dra7xx_only,
omap2plus_defconfig_am43xx_only,
rmk_omap4430_sdp_oldconfig,
rmk_omap4430_sdp_allnoconfig
Pass ( 8/17): omap2plus_defconfig,
omap2plus_defconfig_2430sdp_only,
omap2plus_defconfig_cpupm, omap2plus_defconfig_no_pm,
omap2plus_defconfig_omap3_4_only,
rmk_omap3430_ldp_oldconfig,
rmk_omap3430_ldp_allnoconfig, multi_v7_defconfig
Build warnings from toolchain: uImage:
FAIL ( 3/ 3): omap1_defconfig, omap1_defconfig_1510innovator_only,
omap1_defconfig_5912osk_only
Build warnings from toolchain: uImage+dtb:
FAIL ( 2/13): omap2plus_defconfig_am33xx_only/am335x-bone,
omap2plus_defconfig_n800_only_a/omap2420-n800
Build warnings from toolchain: zImage:
FAIL (14/17): omap2plus_defconfig, omap2plus_defconfig_am33xx_only,
omap2plus_defconfig_n800_only_a,
omap2plus_defconfig_n800_multi_omap2xxx,
omap2plus_defconfig_2430sdp_only,
omap2plus_defconfig_cpupm, omap2plus_defconfig_no_pm,
omap2plus_defconfig_omap2_4_only,
omap2plus_defconfig_omap3_4_only,
omap2plus_defconfig_omap5_only,
omap2plus_defconfig_dra7xx_only,
omap2plus_defconfig_am43xx_only,
rmk_omap3430_ldp_oldconfig,
rmk_omap4430_sdp_oldconfig
Boot to userspace:
FAIL ( 6/17): 4460varsomom, 2430sdp, 3530es3beagle, 3530es31beagle,
cmt3517, 5430es2sbct54
skip ( 5/17): 5912osk, 3517evm, am335xbonelt, am335xbone, 2420n800
Pass ( 6/17): 4430es2panda, 4460pandaes, 37xxevm, 3730beaglexm,
3730es12beaglexm, 5430es2uevm
Kernel warnings during boot to userspace:
FAIL ( 1/17): 4430es2panda
PM: chip retention via suspend:
skip ( 1/12): am335xbonelt
FAIL ( 7/12): 4430es2panda, 4460varsomom, 3530es3beagle,
3530es31beagle, 2430sdp, 5430es2uevm, 5430es2sbct54
Pass ( 4/12): 4460pandaes, 37xxevm, 3730beaglexm, 3730es12beaglexm
PM: chip retention via dynamic idle:
skip ( 1/12): am335xbonelt
FAIL ( 7/12): 4430es2panda, 4460varsomom, 3530es3beagle,
3530es31beagle, 2430sdp, 5430es2uevm, 5430es2sbct54
Pass ( 4/12): 4460pandaes, 37xxevm, 3730beaglexm, 3730es12beaglexm
PM: chip off (except CORE, due to errata) via suspend:
Pass ( 1/ 1): 3730beaglexm
PM: chip off (except CORE, due to errata) via dynamic idle:
Pass ( 1/ 1): 3730beaglexm
PM: chip off via suspend:
FAIL ( 2/ 4): 3530es3beagle, 3530es31beagle
Pass ( 2/ 4): 37xxevm, 3730es12beaglexm
PM: chip off via dynamic idle:
FAIL ( 2/ 4): 3530es3beagle, 3530es31beagle
Pass ( 2/ 4): 37xxevm, 3730es12beaglexm
Kernel warnings during PM test:
FAIL ( 1/17): 4430es2panda
Obsolete Kconfig symbols:
FAIL ( 1/20): multi_v7_defconfig
vmlinux object size
(delta in bytes from test_v4.1-rc2 (5ebe6afaf0057ac3eaeb98defd5456894b446d22)):
text data bss total kernel
0 0 0 0 omap1_defconfig
0 0 0 0 omap1_defconfig_1510innovator_only
0 0 0 0 omap1_defconfig_5912osk_only
-1484 -8 0 -1492 multi_v7_defconfig
-2108 +56 0 -2052 omap2plus_defconfig
0 0 0 0 omap2plus_defconfig_2430sdp_only
-6140 +56 -64 -6148 omap2plus_defconfig_cpupm
-6204 -8 0 -6212 omap2plus_defconfig_no_pm
-1908 -8 0 -1916 omap2plus_defconfig_omap3_4_only
-2804 -4 +780 -2028 rmk_omap3430_ldp_allnoconfig
-1812 -8 +64 -1756 rmk_omap3430_ldp_oldconfig
Boot-time memory difference
(delta in bytes from test_v4.1-rc2 (5ebe6afaf0057ac3eaeb98defd5456894b446d22))
avail rsrvd high freed board kconfig
-117644k -13428k . -168k 2420n800 omap2plus_defconfig_n800_only_a
-4k 4k . . 5430es2sbct54 omap2plus_defconfig
-79556k -51516k . -364k am335xbone omap2plus_defconfig_am33xx_only
-224000k -37120k . -440k am335xbonelt omap2plus_defconfig
^ permalink raw reply [flat|nested] 120+ messages in thread
* Re: [PATCHv2 00/27] ARM: OMAP2+: clock code migration to drivers/clk/ti
2015-05-11 20:21 ` Paul Walmsley
(?)
@ 2015-05-12 10:10 ` Tero Kristo
-1 siblings, 0 replies; 120+ messages in thread
From: Tero Kristo @ 2015-05-12 10:10 UTC (permalink / raw)
To: Paul Walmsley
Cc: mturquette, tony, linux-omap, linux-clk, sboyd, linux-arm-kernel
On 05/11/2015 11:21 PM, Paul Walmsley wrote:
> Hi
>
> On Mon, 11 May 2015, Tero Kristo wrote:
>
>> This set moves most of the OMAP2+ clock driver code under drivers/clk.
>> There are still a couple of files under mach-omap2 folder after this
>> set which have either unmet dependencies still (towards PRCM driver)
>> or is currently slightly broken (some of the DVFS code for OMAP2/OMAP3.)
>> Earlier version of this set has been posted back in March (see
>> http://www.spinics.net/lists/linux-omap/msg116418.html), mostly
>> the code is the same except patches 25+ which are new.
>>
>> Overall diffstat for this set:
>> 42 files changed, 2644 insertions(+), 3707 deletions(-)
>>
>> Testing done:
>> am335x-evm : boot
>> am335x-evmsk : boot
>> am3517-evm : boot
>> am37x-evm : boot
>> am43x-epos-evm : boot
>> am437x-gp-evm : boot
>> omap3-beagle-xm : boot
>> omap3-beagle : boot, suspend-resume (ret/off), cpuidle (ret/off)
>> am335x-boneblack: boot
>> am335x-bone : boot
>> craneboard : boot
>> dra7xx-evm : boot
>> omap3430-ldp : boot
>> omap3-n900 : boot
>> omap5-uevm : boot
>> omap4-panda-es : boot, suspend-resume (ret), cpuidle (ret)
>> omap4-panda : boot
>> omap2430-sdp : boot
>> omap3430-sdp : boot
>> omap4-sdp-es23plus: boot
>>
>> Branch info:
>> - tree: https://github.com/t-kristo/linux-pm.git
>> - branch: for-4.2/ti-clk-move
>
> I can't replicate your test results. Several Kconfigs fail to build here,
> and many boards don't even boot.
>
> Could you please post a copy of your boot logs?
>
> - Paul
>
> http://www.pwsan.com/omap/testlogs/test-tkristo-clk-move-v4.2/20150511115145/
>
> OMAP development test results for test-tkristo-clk-move-v4.2 20150511115145
Oh hmm, I seem to have introduced a Makefile issue which breaks a couple
of special builds. I just force pushed updated branch.
Here are the boot logs for it, I tried also single-soc builds with
am3/am4/omap2/omap3/omap4/omap5/dra7:
: Board : Boot url
1: am335x-evm : PASS http://paste.ubuntu.com/11093628/
2: am335x-evmsk : PASS http://paste.ubuntu.com/11093629/
3: am3517-evm : PASS http://paste.ubuntu.com/11093630/
4: am37x-evm : PASS http://paste.ubuntu.com/11093632/
5: am43x-epos-evm : PASS http://paste.ubuntu.com/11093633/
6: am437x-gp-evm : PASS http://paste.ubuntu.com/11093634/
7: am57xx-evm : FAIL http://paste.ubuntu.com/11093635/
8: omap3-beagle-xm : PASS http://paste.ubuntu.com/11093636/
9: omap3-beagle : PASS http://paste.ubuntu.com/11093637/
10: am335x-boneblack: PASS http://paste.ubuntu.com/11093638/
11: am335x-bone : PASS http://paste.ubuntu.com/11093639/
12: craneboard : PASS http://paste.ubuntu.com/11093640/
13: dra7xx-evm : PASS http://paste.ubuntu.com/11093641/
14: omap3430-ldp : PASS http://paste.ubuntu.com/11093642/
15: omap3-n900 : PASS http://paste.ubuntu.com/11093643/
16: omap5-uevm : PASS http://paste.ubuntu.com/11093645/
17: omap4-panda-es : PASS http://paste.ubuntu.com/11093646/
18: omap4-panda : PASS http://paste.ubuntu.com/11093647/
19: omap2430-sdp : PASS http://paste.ubuntu.com/11093648/
20: omap3430-sdp : PASS http://paste.ubuntu.com/11093649/
21: omap4-sdp-es23plus: PASS http://paste.ubuntu.com/11093650/
TOTAL = 21 boards, Booted Boards = 20, No Boot boards = 1
AM57xx-evm boot fails as it is missing some patches from Nishanth (I
think the UART mux has changed.)
-Tero
>
>
> Test summary
> ------------
>
> Build: uImage:
> Pass ( 3/ 3): omap1_defconfig, omap1_defconfig_1510innovator_only,
> omap1_defconfig_5912osk_only
>
> Build: uImage+dtb:
> FAIL ( 2/13): omap2plus_defconfig_am33xx_only/am335x-bone,
> omap2plus_defconfig_n800_only_a/omap2420-n800
> Pass (11/13): omap2plus_defconfig/omap4-panda,
> omap2plus_defconfig/omap4-panda-es,
> omap2plus_defconfig/omap4-var-som,
> omap2plus_defconfig/omap3-evm-37xx,
> omap2plus_defconfig/omap2430-sdp,
> omap2plus_defconfig/am3517-evm,
> omap2plus_defconfig/omap3-beagle,
> omap2plus_defconfig/omap3-beagle-xm,
> omap2plus_defconfig/omap3-sbc-t3517,
> omap2plus_defconfig/omap5-uevm,
> omap2plus_defconfig/omap5-sbc-t54
>
> Build: zImage:
> FAIL ( 9/17): omap2plus_defconfig_am33xx_only,
> omap2plus_defconfig_n800_only_a,
> omap2plus_defconfig_n800_multi_omap2xxx,
> omap2plus_defconfig_omap2_4_only,
> omap2plus_defconfig_omap5_only,
> omap2plus_defconfig_dra7xx_only,
> omap2plus_defconfig_am43xx_only,
> rmk_omap4430_sdp_oldconfig,
> rmk_omap4430_sdp_allnoconfig
> Pass ( 8/17): omap2plus_defconfig,
> omap2plus_defconfig_2430sdp_only,
> omap2plus_defconfig_cpupm, omap2plus_defconfig_no_pm,
> omap2plus_defconfig_omap3_4_only,
> rmk_omap3430_ldp_oldconfig,
> rmk_omap3430_ldp_allnoconfig, multi_v7_defconfig
>
> Build warnings from toolchain: uImage:
> FAIL ( 3/ 3): omap1_defconfig, omap1_defconfig_1510innovator_only,
> omap1_defconfig_5912osk_only
>
> Build warnings from toolchain: uImage+dtb:
> FAIL ( 2/13): omap2plus_defconfig_am33xx_only/am335x-bone,
> omap2plus_defconfig_n800_only_a/omap2420-n800
>
> Build warnings from toolchain: zImage:
> FAIL (14/17): omap2plus_defconfig, omap2plus_defconfig_am33xx_only,
> omap2plus_defconfig_n800_only_a,
> omap2plus_defconfig_n800_multi_omap2xxx,
> omap2plus_defconfig_2430sdp_only,
> omap2plus_defconfig_cpupm, omap2plus_defconfig_no_pm,
> omap2plus_defconfig_omap2_4_only,
> omap2plus_defconfig_omap3_4_only,
> omap2plus_defconfig_omap5_only,
> omap2plus_defconfig_dra7xx_only,
> omap2plus_defconfig_am43xx_only,
> rmk_omap3430_ldp_oldconfig,
> rmk_omap4430_sdp_oldconfig
>
> Boot to userspace:
> FAIL ( 6/17): 4460varsomom, 2430sdp, 3530es3beagle, 3530es31beagle,
> cmt3517, 5430es2sbct54
> skip ( 5/17): 5912osk, 3517evm, am335xbonelt, am335xbone, 2420n800
> Pass ( 6/17): 4430es2panda, 4460pandaes, 37xxevm, 3730beaglexm,
> 3730es12beaglexm, 5430es2uevm
>
> Kernel warnings during boot to userspace:
> FAIL ( 1/17): 4430es2panda
>
> PM: chip retention via suspend:
> skip ( 1/12): am335xbonelt
> FAIL ( 7/12): 4430es2panda, 4460varsomom, 3530es3beagle,
> 3530es31beagle, 2430sdp, 5430es2uevm, 5430es2sbct54
> Pass ( 4/12): 4460pandaes, 37xxevm, 3730beaglexm, 3730es12beaglexm
>
> PM: chip retention via dynamic idle:
> skip ( 1/12): am335xbonelt
> FAIL ( 7/12): 4430es2panda, 4460varsomom, 3530es3beagle,
> 3530es31beagle, 2430sdp, 5430es2uevm, 5430es2sbct54
> Pass ( 4/12): 4460pandaes, 37xxevm, 3730beaglexm, 3730es12beaglexm
>
> PM: chip off (except CORE, due to errata) via suspend:
> Pass ( 1/ 1): 3730beaglexm
>
> PM: chip off (except CORE, due to errata) via dynamic idle:
> Pass ( 1/ 1): 3730beaglexm
>
> PM: chip off via suspend:
> FAIL ( 2/ 4): 3530es3beagle, 3530es31beagle
> Pass ( 2/ 4): 37xxevm, 3730es12beaglexm
>
> PM: chip off via dynamic idle:
> FAIL ( 2/ 4): 3530es3beagle, 3530es31beagle
> Pass ( 2/ 4): 37xxevm, 3730es12beaglexm
>
> Kernel warnings during PM test:
> FAIL ( 1/17): 4430es2panda
>
> Obsolete Kconfig symbols:
> FAIL ( 1/20): multi_v7_defconfig
>
>
> vmlinux object size
> (delta in bytes from test_v4.1-rc2 (5ebe6afaf0057ac3eaeb98defd5456894b446d22)):
> text data bss total kernel
> 0 0 0 0 omap1_defconfig
> 0 0 0 0 omap1_defconfig_1510innovator_only
> 0 0 0 0 omap1_defconfig_5912osk_only
> -1484 -8 0 -1492 multi_v7_defconfig
> -2108 +56 0 -2052 omap2plus_defconfig
> 0 0 0 0 omap2plus_defconfig_2430sdp_only
> -6140 +56 -64 -6148 omap2plus_defconfig_cpupm
> -6204 -8 0 -6212 omap2plus_defconfig_no_pm
> -1908 -8 0 -1916 omap2plus_defconfig_omap3_4_only
> -2804 -4 +780 -2028 rmk_omap3430_ldp_allnoconfig
> -1812 -8 +64 -1756 rmk_omap3430_ldp_oldconfig
>
> Boot-time memory difference
> (delta in bytes from test_v4.1-rc2 (5ebe6afaf0057ac3eaeb98defd5456894b446d22))
> avail rsrvd high freed board kconfig
> -117644k -13428k . -168k 2420n800 omap2plus_defconfig_n800_only_a
> -4k 4k . . 5430es2sbct54 omap2plus_defconfig
> -79556k -51516k . -364k am335xbone omap2plus_defconfig_am33xx_only
> -224000k -37120k . -440k am335xbonelt omap2plus_defconfig
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-clk" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
^ permalink raw reply [flat|nested] 120+ messages in thread
* Re: [PATCHv2 00/27] ARM: OMAP2+: clock code migration to drivers/clk/ti
@ 2015-05-12 10:10 ` Tero Kristo
0 siblings, 0 replies; 120+ messages in thread
From: Tero Kristo @ 2015-05-12 10:10 UTC (permalink / raw)
To: Paul Walmsley
Cc: mturquette, tony, linux-omap, linux-clk, sboyd, linux-arm-kernel
On 05/11/2015 11:21 PM, Paul Walmsley wrote:
> Hi
>
> On Mon, 11 May 2015, Tero Kristo wrote:
>
>> This set moves most of the OMAP2+ clock driver code under drivers/clk.
>> There are still a couple of files under mach-omap2 folder after this
>> set which have either unmet dependencies still (towards PRCM driver)
>> or is currently slightly broken (some of the DVFS code for OMAP2/OMAP3.)
>> Earlier version of this set has been posted back in March (see
>> http://www.spinics.net/lists/linux-omap/msg116418.html), mostly
>> the code is the same except patches 25+ which are new.
>>
>> Overall diffstat for this set:
>> 42 files changed, 2644 insertions(+), 3707 deletions(-)
>>
>> Testing done:
>> am335x-evm : boot
>> am335x-evmsk : boot
>> am3517-evm : boot
>> am37x-evm : boot
>> am43x-epos-evm : boot
>> am437x-gp-evm : boot
>> omap3-beagle-xm : boot
>> omap3-beagle : boot, suspend-resume (ret/off), cpuidle (ret/off)
>> am335x-boneblack: boot
>> am335x-bone : boot
>> craneboard : boot
>> dra7xx-evm : boot
>> omap3430-ldp : boot
>> omap3-n900 : boot
>> omap5-uevm : boot
>> omap4-panda-es : boot, suspend-resume (ret), cpuidle (ret)
>> omap4-panda : boot
>> omap2430-sdp : boot
>> omap3430-sdp : boot
>> omap4-sdp-es23plus: boot
>>
>> Branch info:
>> - tree: https://github.com/t-kristo/linux-pm.git
>> - branch: for-4.2/ti-clk-move
>
> I can't replicate your test results. Several Kconfigs fail to build here,
> and many boards don't even boot.
>
> Could you please post a copy of your boot logs?
>
> - Paul
>
> http://www.pwsan.com/omap/testlogs/test-tkristo-clk-move-v4.2/20150511115145/
>
> OMAP development test results for test-tkristo-clk-move-v4.2 20150511115145
Oh hmm, I seem to have introduced a Makefile issue which breaks a couple
of special builds. I just force pushed updated branch.
Here are the boot logs for it, I tried also single-soc builds with
am3/am4/omap2/omap3/omap4/omap5/dra7:
: Board : Boot url
1: am335x-evm : PASS http://paste.ubuntu.com/11093628/
2: am335x-evmsk : PASS http://paste.ubuntu.com/11093629/
3: am3517-evm : PASS http://paste.ubuntu.com/11093630/
4: am37x-evm : PASS http://paste.ubuntu.com/11093632/
5: am43x-epos-evm : PASS http://paste.ubuntu.com/11093633/
6: am437x-gp-evm : PASS http://paste.ubuntu.com/11093634/
7: am57xx-evm : FAIL http://paste.ubuntu.com/11093635/
8: omap3-beagle-xm : PASS http://paste.ubuntu.com/11093636/
9: omap3-beagle : PASS http://paste.ubuntu.com/11093637/
10: am335x-boneblack: PASS http://paste.ubuntu.com/11093638/
11: am335x-bone : PASS http://paste.ubuntu.com/11093639/
12: craneboard : PASS http://paste.ubuntu.com/11093640/
13: dra7xx-evm : PASS http://paste.ubuntu.com/11093641/
14: omap3430-ldp : PASS http://paste.ubuntu.com/11093642/
15: omap3-n900 : PASS http://paste.ubuntu.com/11093643/
16: omap5-uevm : PASS http://paste.ubuntu.com/11093645/
17: omap4-panda-es : PASS http://paste.ubuntu.com/11093646/
18: omap4-panda : PASS http://paste.ubuntu.com/11093647/
19: omap2430-sdp : PASS http://paste.ubuntu.com/11093648/
20: omap3430-sdp : PASS http://paste.ubuntu.com/11093649/
21: omap4-sdp-es23plus: PASS http://paste.ubuntu.com/11093650/
TOTAL = 21 boards, Booted Boards = 20, No Boot boards = 1
AM57xx-evm boot fails as it is missing some patches from Nishanth (I
think the UART mux has changed.)
-Tero
>
>
> Test summary
> ------------
>
> Build: uImage:
> Pass ( 3/ 3): omap1_defconfig, omap1_defconfig_1510innovator_only,
> omap1_defconfig_5912osk_only
>
> Build: uImage+dtb:
> FAIL ( 2/13): omap2plus_defconfig_am33xx_only/am335x-bone,
> omap2plus_defconfig_n800_only_a/omap2420-n800
> Pass (11/13): omap2plus_defconfig/omap4-panda,
> omap2plus_defconfig/omap4-panda-es,
> omap2plus_defconfig/omap4-var-som,
> omap2plus_defconfig/omap3-evm-37xx,
> omap2plus_defconfig/omap2430-sdp,
> omap2plus_defconfig/am3517-evm,
> omap2plus_defconfig/omap3-beagle,
> omap2plus_defconfig/omap3-beagle-xm,
> omap2plus_defconfig/omap3-sbc-t3517,
> omap2plus_defconfig/omap5-uevm,
> omap2plus_defconfig/omap5-sbc-t54
>
> Build: zImage:
> FAIL ( 9/17): omap2plus_defconfig_am33xx_only,
> omap2plus_defconfig_n800_only_a,
> omap2plus_defconfig_n800_multi_omap2xxx,
> omap2plus_defconfig_omap2_4_only,
> omap2plus_defconfig_omap5_only,
> omap2plus_defconfig_dra7xx_only,
> omap2plus_defconfig_am43xx_only,
> rmk_omap4430_sdp_oldconfig,
> rmk_omap4430_sdp_allnoconfig
> Pass ( 8/17): omap2plus_defconfig,
> omap2plus_defconfig_2430sdp_only,
> omap2plus_defconfig_cpupm, omap2plus_defconfig_no_pm,
> omap2plus_defconfig_omap3_4_only,
> rmk_omap3430_ldp_oldconfig,
> rmk_omap3430_ldp_allnoconfig, multi_v7_defconfig
>
> Build warnings from toolchain: uImage:
> FAIL ( 3/ 3): omap1_defconfig, omap1_defconfig_1510innovator_only,
> omap1_defconfig_5912osk_only
>
> Build warnings from toolchain: uImage+dtb:
> FAIL ( 2/13): omap2plus_defconfig_am33xx_only/am335x-bone,
> omap2plus_defconfig_n800_only_a/omap2420-n800
>
> Build warnings from toolchain: zImage:
> FAIL (14/17): omap2plus_defconfig, omap2plus_defconfig_am33xx_only,
> omap2plus_defconfig_n800_only_a,
> omap2plus_defconfig_n800_multi_omap2xxx,
> omap2plus_defconfig_2430sdp_only,
> omap2plus_defconfig_cpupm, omap2plus_defconfig_no_pm,
> omap2plus_defconfig_omap2_4_only,
> omap2plus_defconfig_omap3_4_only,
> omap2plus_defconfig_omap5_only,
> omap2plus_defconfig_dra7xx_only,
> omap2plus_defconfig_am43xx_only,
> rmk_omap3430_ldp_oldconfig,
> rmk_omap4430_sdp_oldconfig
>
> Boot to userspace:
> FAIL ( 6/17): 4460varsomom, 2430sdp, 3530es3beagle, 3530es31beagle,
> cmt3517, 5430es2sbct54
> skip ( 5/17): 5912osk, 3517evm, am335xbonelt, am335xbone, 2420n800
> Pass ( 6/17): 4430es2panda, 4460pandaes, 37xxevm, 3730beaglexm,
> 3730es12beaglexm, 5430es2uevm
>
> Kernel warnings during boot to userspace:
> FAIL ( 1/17): 4430es2panda
>
> PM: chip retention via suspend:
> skip ( 1/12): am335xbonelt
> FAIL ( 7/12): 4430es2panda, 4460varsomom, 3530es3beagle,
> 3530es31beagle, 2430sdp, 5430es2uevm, 5430es2sbct54
> Pass ( 4/12): 4460pandaes, 37xxevm, 3730beaglexm, 3730es12beaglexm
>
> PM: chip retention via dynamic idle:
> skip ( 1/12): am335xbonelt
> FAIL ( 7/12): 4430es2panda, 4460varsomom, 3530es3beagle,
> 3530es31beagle, 2430sdp, 5430es2uevm, 5430es2sbct54
> Pass ( 4/12): 4460pandaes, 37xxevm, 3730beaglexm, 3730es12beaglexm
>
> PM: chip off (except CORE, due to errata) via suspend:
> Pass ( 1/ 1): 3730beaglexm
>
> PM: chip off (except CORE, due to errata) via dynamic idle:
> Pass ( 1/ 1): 3730beaglexm
>
> PM: chip off via suspend:
> FAIL ( 2/ 4): 3530es3beagle, 3530es31beagle
> Pass ( 2/ 4): 37xxevm, 3730es12beaglexm
>
> PM: chip off via dynamic idle:
> FAIL ( 2/ 4): 3530es3beagle, 3530es31beagle
> Pass ( 2/ 4): 37xxevm, 3730es12beaglexm
>
> Kernel warnings during PM test:
> FAIL ( 1/17): 4430es2panda
>
> Obsolete Kconfig symbols:
> FAIL ( 1/20): multi_v7_defconfig
>
>
> vmlinux object size
> (delta in bytes from test_v4.1-rc2 (5ebe6afaf0057ac3eaeb98defd5456894b446d22)):
> text data bss total kernel
> 0 0 0 0 omap1_defconfig
> 0 0 0 0 omap1_defconfig_1510innovator_only
> 0 0 0 0 omap1_defconfig_5912osk_only
> -1484 -8 0 -1492 multi_v7_defconfig
> -2108 +56 0 -2052 omap2plus_defconfig
> 0 0 0 0 omap2plus_defconfig_2430sdp_only
> -6140 +56 -64 -6148 omap2plus_defconfig_cpupm
> -6204 -8 0 -6212 omap2plus_defconfig_no_pm
> -1908 -8 0 -1916 omap2plus_defconfig_omap3_4_only
> -2804 -4 +780 -2028 rmk_omap3430_ldp_allnoconfig
> -1812 -8 +64 -1756 rmk_omap3430_ldp_oldconfig
>
> Boot-time memory difference
> (delta in bytes from test_v4.1-rc2 (5ebe6afaf0057ac3eaeb98defd5456894b446d22))
> avail rsrvd high freed board kconfig
> -117644k -13428k . -168k 2420n800 omap2plus_defconfig_n800_only_a
> -4k 4k . . 5430es2sbct54 omap2plus_defconfig
> -79556k -51516k . -364k am335xbone omap2plus_defconfig_am33xx_only
> -224000k -37120k . -440k am335xbonelt omap2plus_defconfig
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-clk" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
^ permalink raw reply [flat|nested] 120+ messages in thread
* [PATCHv2 00/27] ARM: OMAP2+: clock code migration to drivers/clk/ti
@ 2015-05-12 10:10 ` Tero Kristo
0 siblings, 0 replies; 120+ messages in thread
From: Tero Kristo @ 2015-05-12 10:10 UTC (permalink / raw)
To: linux-arm-kernel
On 05/11/2015 11:21 PM, Paul Walmsley wrote:
> Hi
>
> On Mon, 11 May 2015, Tero Kristo wrote:
>
>> This set moves most of the OMAP2+ clock driver code under drivers/clk.
>> There are still a couple of files under mach-omap2 folder after this
>> set which have either unmet dependencies still (towards PRCM driver)
>> or is currently slightly broken (some of the DVFS code for OMAP2/OMAP3.)
>> Earlier version of this set has been posted back in March (see
>> http://www.spinics.net/lists/linux-omap/msg116418.html), mostly
>> the code is the same except patches 25+ which are new.
>>
>> Overall diffstat for this set:
>> 42 files changed, 2644 insertions(+), 3707 deletions(-)
>>
>> Testing done:
>> am335x-evm : boot
>> am335x-evmsk : boot
>> am3517-evm : boot
>> am37x-evm : boot
>> am43x-epos-evm : boot
>> am437x-gp-evm : boot
>> omap3-beagle-xm : boot
>> omap3-beagle : boot, suspend-resume (ret/off), cpuidle (ret/off)
>> am335x-boneblack: boot
>> am335x-bone : boot
>> craneboard : boot
>> dra7xx-evm : boot
>> omap3430-ldp : boot
>> omap3-n900 : boot
>> omap5-uevm : boot
>> omap4-panda-es : boot, suspend-resume (ret), cpuidle (ret)
>> omap4-panda : boot
>> omap2430-sdp : boot
>> omap3430-sdp : boot
>> omap4-sdp-es23plus: boot
>>
>> Branch info:
>> - tree: https://github.com/t-kristo/linux-pm.git
>> - branch: for-4.2/ti-clk-move
>
> I can't replicate your test results. Several Kconfigs fail to build here,
> and many boards don't even boot.
>
> Could you please post a copy of your boot logs?
>
> - Paul
>
> http://www.pwsan.com/omap/testlogs/test-tkristo-clk-move-v4.2/20150511115145/
>
> OMAP development test results for test-tkristo-clk-move-v4.2 20150511115145
Oh hmm, I seem to have introduced a Makefile issue which breaks a couple
of special builds. I just force pushed updated branch.
Here are the boot logs for it, I tried also single-soc builds with
am3/am4/omap2/omap3/omap4/omap5/dra7:
: Board : Boot url
1: am335x-evm : PASS http://paste.ubuntu.com/11093628/
2: am335x-evmsk : PASS http://paste.ubuntu.com/11093629/
3: am3517-evm : PASS http://paste.ubuntu.com/11093630/
4: am37x-evm : PASS http://paste.ubuntu.com/11093632/
5: am43x-epos-evm : PASS http://paste.ubuntu.com/11093633/
6: am437x-gp-evm : PASS http://paste.ubuntu.com/11093634/
7: am57xx-evm : FAIL http://paste.ubuntu.com/11093635/
8: omap3-beagle-xm : PASS http://paste.ubuntu.com/11093636/
9: omap3-beagle : PASS http://paste.ubuntu.com/11093637/
10: am335x-boneblack: PASS http://paste.ubuntu.com/11093638/
11: am335x-bone : PASS http://paste.ubuntu.com/11093639/
12: craneboard : PASS http://paste.ubuntu.com/11093640/
13: dra7xx-evm : PASS http://paste.ubuntu.com/11093641/
14: omap3430-ldp : PASS http://paste.ubuntu.com/11093642/
15: omap3-n900 : PASS http://paste.ubuntu.com/11093643/
16: omap5-uevm : PASS http://paste.ubuntu.com/11093645/
17: omap4-panda-es : PASS http://paste.ubuntu.com/11093646/
18: omap4-panda : PASS http://paste.ubuntu.com/11093647/
19: omap2430-sdp : PASS http://paste.ubuntu.com/11093648/
20: omap3430-sdp : PASS http://paste.ubuntu.com/11093649/
21: omap4-sdp-es23plus: PASS http://paste.ubuntu.com/11093650/
TOTAL = 21 boards, Booted Boards = 20, No Boot boards = 1
AM57xx-evm boot fails as it is missing some patches from Nishanth (I
think the UART mux has changed.)
-Tero
>
>
> Test summary
> ------------
>
> Build: uImage:
> Pass ( 3/ 3): omap1_defconfig, omap1_defconfig_1510innovator_only,
> omap1_defconfig_5912osk_only
>
> Build: uImage+dtb:
> FAIL ( 2/13): omap2plus_defconfig_am33xx_only/am335x-bone,
> omap2plus_defconfig_n800_only_a/omap2420-n800
> Pass (11/13): omap2plus_defconfig/omap4-panda,
> omap2plus_defconfig/omap4-panda-es,
> omap2plus_defconfig/omap4-var-som,
> omap2plus_defconfig/omap3-evm-37xx,
> omap2plus_defconfig/omap2430-sdp,
> omap2plus_defconfig/am3517-evm,
> omap2plus_defconfig/omap3-beagle,
> omap2plus_defconfig/omap3-beagle-xm,
> omap2plus_defconfig/omap3-sbc-t3517,
> omap2plus_defconfig/omap5-uevm,
> omap2plus_defconfig/omap5-sbc-t54
>
> Build: zImage:
> FAIL ( 9/17): omap2plus_defconfig_am33xx_only,
> omap2plus_defconfig_n800_only_a,
> omap2plus_defconfig_n800_multi_omap2xxx,
> omap2plus_defconfig_omap2_4_only,
> omap2plus_defconfig_omap5_only,
> omap2plus_defconfig_dra7xx_only,
> omap2plus_defconfig_am43xx_only,
> rmk_omap4430_sdp_oldconfig,
> rmk_omap4430_sdp_allnoconfig
> Pass ( 8/17): omap2plus_defconfig,
> omap2plus_defconfig_2430sdp_only,
> omap2plus_defconfig_cpupm, omap2plus_defconfig_no_pm,
> omap2plus_defconfig_omap3_4_only,
> rmk_omap3430_ldp_oldconfig,
> rmk_omap3430_ldp_allnoconfig, multi_v7_defconfig
>
> Build warnings from toolchain: uImage:
> FAIL ( 3/ 3): omap1_defconfig, omap1_defconfig_1510innovator_only,
> omap1_defconfig_5912osk_only
>
> Build warnings from toolchain: uImage+dtb:
> FAIL ( 2/13): omap2plus_defconfig_am33xx_only/am335x-bone,
> omap2plus_defconfig_n800_only_a/omap2420-n800
>
> Build warnings from toolchain: zImage:
> FAIL (14/17): omap2plus_defconfig, omap2plus_defconfig_am33xx_only,
> omap2plus_defconfig_n800_only_a,
> omap2plus_defconfig_n800_multi_omap2xxx,
> omap2plus_defconfig_2430sdp_only,
> omap2plus_defconfig_cpupm, omap2plus_defconfig_no_pm,
> omap2plus_defconfig_omap2_4_only,
> omap2plus_defconfig_omap3_4_only,
> omap2plus_defconfig_omap5_only,
> omap2plus_defconfig_dra7xx_only,
> omap2plus_defconfig_am43xx_only,
> rmk_omap3430_ldp_oldconfig,
> rmk_omap4430_sdp_oldconfig
>
> Boot to userspace:
> FAIL ( 6/17): 4460varsomom, 2430sdp, 3530es3beagle, 3530es31beagle,
> cmt3517, 5430es2sbct54
> skip ( 5/17): 5912osk, 3517evm, am335xbonelt, am335xbone, 2420n800
> Pass ( 6/17): 4430es2panda, 4460pandaes, 37xxevm, 3730beaglexm,
> 3730es12beaglexm, 5430es2uevm
>
> Kernel warnings during boot to userspace:
> FAIL ( 1/17): 4430es2panda
>
> PM: chip retention via suspend:
> skip ( 1/12): am335xbonelt
> FAIL ( 7/12): 4430es2panda, 4460varsomom, 3530es3beagle,
> 3530es31beagle, 2430sdp, 5430es2uevm, 5430es2sbct54
> Pass ( 4/12): 4460pandaes, 37xxevm, 3730beaglexm, 3730es12beaglexm
>
> PM: chip retention via dynamic idle:
> skip ( 1/12): am335xbonelt
> FAIL ( 7/12): 4430es2panda, 4460varsomom, 3530es3beagle,
> 3530es31beagle, 2430sdp, 5430es2uevm, 5430es2sbct54
> Pass ( 4/12): 4460pandaes, 37xxevm, 3730beaglexm, 3730es12beaglexm
>
> PM: chip off (except CORE, due to errata) via suspend:
> Pass ( 1/ 1): 3730beaglexm
>
> PM: chip off (except CORE, due to errata) via dynamic idle:
> Pass ( 1/ 1): 3730beaglexm
>
> PM: chip off via suspend:
> FAIL ( 2/ 4): 3530es3beagle, 3530es31beagle
> Pass ( 2/ 4): 37xxevm, 3730es12beaglexm
>
> PM: chip off via dynamic idle:
> FAIL ( 2/ 4): 3530es3beagle, 3530es31beagle
> Pass ( 2/ 4): 37xxevm, 3730es12beaglexm
>
> Kernel warnings during PM test:
> FAIL ( 1/17): 4430es2panda
>
> Obsolete Kconfig symbols:
> FAIL ( 1/20): multi_v7_defconfig
>
>
> vmlinux object size
> (delta in bytes from test_v4.1-rc2 (5ebe6afaf0057ac3eaeb98defd5456894b446d22)):
> text data bss total kernel
> 0 0 0 0 omap1_defconfig
> 0 0 0 0 omap1_defconfig_1510innovator_only
> 0 0 0 0 omap1_defconfig_5912osk_only
> -1484 -8 0 -1492 multi_v7_defconfig
> -2108 +56 0 -2052 omap2plus_defconfig
> 0 0 0 0 omap2plus_defconfig_2430sdp_only
> -6140 +56 -64 -6148 omap2plus_defconfig_cpupm
> -6204 -8 0 -6212 omap2plus_defconfig_no_pm
> -1908 -8 0 -1916 omap2plus_defconfig_omap3_4_only
> -2804 -4 +780 -2028 rmk_omap3430_ldp_allnoconfig
> -1812 -8 +64 -1756 rmk_omap3430_ldp_oldconfig
>
> Boot-time memory difference
> (delta in bytes from test_v4.1-rc2 (5ebe6afaf0057ac3eaeb98defd5456894b446d22))
> avail rsrvd high freed board kconfig
> -117644k -13428k . -168k 2420n800 omap2plus_defconfig_n800_only_a
> -4k 4k . . 5430es2sbct54 omap2plus_defconfig
> -79556k -51516k . -364k am335xbone omap2plus_defconfig_am33xx_only
> -224000k -37120k . -440k am335xbonelt omap2plus_defconfig
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-clk" in
> the body of a message to majordomo at vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
^ permalink raw reply [flat|nested] 120+ messages in thread
* Re: [PATCHv2 00/27] ARM: OMAP2+: clock code migration to drivers/clk/ti
2015-05-12 10:10 ` Tero Kristo
@ 2015-05-12 20:58 ` Paul Walmsley
-1 siblings, 0 replies; 120+ messages in thread
From: Paul Walmsley @ 2015-05-12 20:58 UTC (permalink / raw)
To: Tero Kristo
Cc: mturquette, tony, linux-omap, linux-clk, sboyd, linux-arm-kernel
On Tue, 12 May 2015, Tero Kristo wrote:
> On 05/11/2015 11:21 PM, Paul Walmsley wrote:
> > On Mon, 11 May 2015, Tero Kristo wrote:
> >
> > > This set moves most of the OMAP2+ clock driver code under drivers/clk.
> > > There are still a couple of files under mach-omap2 folder after this
> > > set which have either unmet dependencies still (towards PRCM driver)
> > > or is currently slightly broken (some of the DVFS code for OMAP2/OMAP3.)
> > > Earlier version of this set has been posted back in March (see
> > > http://www.spinics.net/lists/linux-omap/msg116418.html), mostly
> > > the code is the same except patches 25+ which are new.
...
> > >
> > > Branch info:
> > > - tree: https://github.com/t-kristo/linux-pm.git
> > > - branch: for-4.2/ti-clk-move
> >
> > I can't replicate your test results. Several Kconfigs fail to build here,
> > and many boards don't even boot.
> >
> > Could you please post a copy of your boot logs?
> >
> > - Paul
> >
> > http://www.pwsan.com/omap/testlogs/test-tkristo-clk-move-v4.2/20150511115145/
> >
> > OMAP development test results for test-tkristo-clk-move-v4.2 20150511115145
>
> Oh hmm, I seem to have introduced a Makefile issue which breaks a couple of
> special builds. I just force pushed updated branch.
This one is better... the build problems are now fixed.
> Here are the boot logs for it, I tried also single-soc builds with
> am3/am4/omap2/omap3/omap4/omap5/dra7:
>
> : Board : Boot url
> 1: am335x-evm : PASS http://paste.ubuntu.com/11093628/
> 2: am335x-evmsk : PASS http://paste.ubuntu.com/11093629/
> 3: am3517-evm : PASS http://paste.ubuntu.com/11093630/
> 4: am37x-evm : PASS http://paste.ubuntu.com/11093632/
> 5: am43x-epos-evm : PASS http://paste.ubuntu.com/11093633/
> 6: am437x-gp-evm : PASS http://paste.ubuntu.com/11093634/
> 7: am57xx-evm : FAIL http://paste.ubuntu.com/11093635/
> 8: omap3-beagle-xm : PASS http://paste.ubuntu.com/11093636/
> 9: omap3-beagle : PASS http://paste.ubuntu.com/11093637/
> 10: am335x-boneblack: PASS http://paste.ubuntu.com/11093638/
> 11: am335x-bone : PASS http://paste.ubuntu.com/11093639/
> 12: craneboard : PASS http://paste.ubuntu.com/11093640/
> 13: dra7xx-evm : PASS http://paste.ubuntu.com/11093641/
> 14: omap3430-ldp : PASS http://paste.ubuntu.com/11093642/
> 15: omap3-n900 : PASS http://paste.ubuntu.com/11093643/
> 16: omap5-uevm : PASS http://paste.ubuntu.com/11093645/
> 17: omap4-panda-es : PASS http://paste.ubuntu.com/11093646/
> 18: omap4-panda : PASS http://paste.ubuntu.com/11093647/
> 19: omap2430-sdp : PASS http://paste.ubuntu.com/11093648/
> 20: omap3430-sdp : PASS http://paste.ubuntu.com/11093649/
> 21: omap4-sdp-es23plus: PASS http://paste.ubuntu.com/11093650/
> TOTAL = 21 boards, Booted Boards = 20, No Boot boards = 1
>
> AM57xx-evm boot fails as it is missing some patches from Nishanth (I think the
> UART mux has changed.)
But this one has the same problems as v4.1-rc1 and beyond: it still
doesn't boot here on any OMAP34xx/OMAP35xx platform, nor the CM-T3517,
OMAP4460 VAR-SOM-OM, or OMAP5430ES2 SBC-T54:
http://www.pwsan.com/omap/testlogs/test_v4.1-rc1/20150426200156/README.txt
Thanks for posting your test logs above. They don't include bootloader
info, but my guess is that v4.1-rc* has some hidden bootloader
dependencies where things aren't being initialized properly from the
kernel.
So those should be tracked down and fixed before we stack more patches on
top.
- Paul
http://www.pwsan.com/omap/testlogs/test-tkristo-clk-move-v4.2/20150512121218/
OMAP development test results for test-tkristo-clk-move-v4.2 20150512121218
Test summary
------------
Build: uImage:
Pass ( 3/ 3): omap1_defconfig, omap1_defconfig_1510innovator_only,
omap1_defconfig_5912osk_only
Build: uImage+dtb:
Pass (13/13): omap2plus_defconfig_am33xx_only/am335x-bone,
omap2plus_defconfig/omap4-panda,
omap2plus_defconfig/omap4-panda-es,
omap2plus_defconfig/omap4-var-som,
omap2plus_defconfig/omap3-evm-37xx,
omap2plus_defconfig_n800_only_a/omap2420-n800,
omap2plus_defconfig/omap2430-sdp,
omap2plus_defconfig/am3517-evm,
omap2plus_defconfig/omap3-beagle,
omap2plus_defconfig/omap3-beagle-xm,
omap2plus_defconfig/omap3-sbc-t3517,
omap2plus_defconfig/omap5-uevm,
omap2plus_defconfig/omap5-sbc-t54
Build: zImage:
Pass (17/17): omap2plus_defconfig, omap2plus_defconfig_am33xx_only,
omap2plus_defconfig_n800_only_a,
omap2plus_defconfig_n800_multi_omap2xxx,
omap2plus_defconfig_2430sdp_only,
omap2plus_defconfig_cpupm, omap2plus_defconfig_no_pm,
omap2plus_defconfig_omap2_4_only,
omap2plus_defconfig_omap3_4_only,
omap2plus_defconfig_omap5_only,
omap2plus_defconfig_dra7xx_only,
omap2plus_defconfig_am43xx_only,
rmk_omap3430_ldp_oldconfig,
rmk_omap3430_ldp_allnoconfig,
rmk_omap4430_sdp_oldconfig,
rmk_omap4430_sdp_allnoconfig, multi_v7_defconfig
Build warnings from toolchain: uImage:
FAIL ( 3/ 3): omap1_defconfig, omap1_defconfig_1510innovator_only,
omap1_defconfig_5912osk_only
Build warnings from toolchain: uImage+dtb:
(none)
Build warnings from toolchain: zImage:
FAIL (14/17): omap2plus_defconfig, omap2plus_defconfig_am33xx_only,
omap2plus_defconfig_n800_only_a,
omap2plus_defconfig_n800_multi_omap2xxx,
omap2plus_defconfig_2430sdp_only,
omap2plus_defconfig_cpupm, omap2plus_defconfig_no_pm,
omap2plus_defconfig_omap2_4_only,
omap2plus_defconfig_omap3_4_only,
omap2plus_defconfig_omap5_only,
omap2plus_defconfig_dra7xx_only,
omap2plus_defconfig_am43xx_only,
rmk_omap3430_ldp_oldconfig,
rmk_omap4430_sdp_oldconfig
Boot to userspace:
FAIL ( 6/17): 4460varsomom, 2430sdp, 3530es3beagle, 3530es31beagle,
cmt3517, 5430es2sbct54
skip ( 2/17): 5912osk, 3517evm
Pass ( 9/17): am335xbonelt, am335xbone, 4430es2panda, 4460pandaes,
37xxevm, 3730beaglexm, 3730es12beaglexm, 5430es2uevm,
2420n800
Kernel warnings during boot to userspace:
FAIL ( 1/17): 4430es2panda
PM: chip retention via suspend:
FAIL ( 9/12): am335xbonelt, 4430es2panda, 4460varsomom,
3530es3beagle, 3530es31beagle, 3730es12beaglexm,
2430sdp, 5430es2uevm, 5430es2sbct54
Pass ( 3/12): 4460pandaes, 37xxevm, 3730beaglexm
PM: chip retention via dynamic idle:
FAIL ( 9/12): am335xbonelt, 4430es2panda, 4460varsomom,
3530es3beagle, 3530es31beagle, 3730es12beaglexm,
2430sdp, 5430es2uevm, 5430es2sbct54
Pass ( 3/12): 4460pandaes, 37xxevm, 3730beaglexm
PM: chip off (except CORE, due to errata) via suspend:
Pass ( 1/ 1): 3730beaglexm
PM: chip off (except CORE, due to errata) via dynamic idle:
Pass ( 1/ 1): 3730beaglexm
PM: chip off via suspend:
FAIL ( 3/ 4): 3530es3beagle, 3530es31beagle, 3730es12beaglexm
Pass ( 1/ 4): 37xxevm
PM: chip off via dynamic idle:
FAIL ( 3/ 4): 3530es3beagle, 3530es31beagle, 3730es12beaglexm
Pass ( 1/ 4): 37xxevm
Kernel warnings during PM test:
FAIL ( 1/17): 4430es2panda
Obsolete Kconfig symbols:
FAIL ( 1/20): multi_v7_defconfig
vmlinux object size
(delta in bytes from test_v4.1-rc2 (5ebe6afaf0057ac3eaeb98defd5456894b446d22)):
text data bss total kernel
0 0 0 0 omap1_defconfig
0 0 0 0 omap1_defconfig_1510innovator_only
0 0 0 0 omap1_defconfig_5912osk_only
-1492 -8 0 -1500 multi_v7_defconfig
-2116 +56 0 -2060 omap2plus_defconfig
0 0 0 0 omap2plus_defconfig_2430sdp_only
-1476 0 +64 -1412 omap2plus_defconfig_am33xx_only
-5572 0 +64 -5508 omap2plus_defconfig_am43xx_only
-6148 +56 -64 -6156 omap2plus_defconfig_cpupm
-5500 0 +64 -5436 omap2plus_defconfig_dra7xx_only
-1668 0 +12 -1656 omap2plus_defconfig_n800_multi_omap2xxx
-1636 -8 -20 -1664 omap2plus_defconfig_n800_only_a
-6212 -8 0 -6220 omap2plus_defconfig_no_pm
-5828 0 -64 -5892 omap2plus_defconfig_omap2_4_only
-1916 -8 0 -1924 omap2plus_defconfig_omap3_4_only
-1412 0 0 -1412 omap2plus_defconfig_omap5_only
-2804 -4 +780 -2028 rmk_omap3430_ldp_allnoconfig
-1812 -8 +64 -1756 rmk_omap3430_ldp_oldconfig
-2332 0 +956 -1376 rmk_omap4430_sdp_allnoconfig
-1336 +64 0 -1272 rmk_omap4430_sdp_oldconfig
Boot-time memory difference
(delta in bytes from test_v4.1-rc2 (5ebe6afaf0057ac3eaeb98defd5456894b446d22))
avail rsrvd high freed board kconfig
-4k 4k . . 5430es2sbct54 omap2plus_defconfig
. . . 4k am335xbone omap2plus_defconfig_am33xx_only
^ permalink raw reply [flat|nested] 120+ messages in thread
* [PATCHv2 00/27] ARM: OMAP2+: clock code migration to drivers/clk/ti
@ 2015-05-12 20:58 ` Paul Walmsley
0 siblings, 0 replies; 120+ messages in thread
From: Paul Walmsley @ 2015-05-12 20:58 UTC (permalink / raw)
To: linux-arm-kernel
On Tue, 12 May 2015, Tero Kristo wrote:
> On 05/11/2015 11:21 PM, Paul Walmsley wrote:
> > On Mon, 11 May 2015, Tero Kristo wrote:
> >
> > > This set moves most of the OMAP2+ clock driver code under drivers/clk.
> > > There are still a couple of files under mach-omap2 folder after this
> > > set which have either unmet dependencies still (towards PRCM driver)
> > > or is currently slightly broken (some of the DVFS code for OMAP2/OMAP3.)
> > > Earlier version of this set has been posted back in March (see
> > > http://www.spinics.net/lists/linux-omap/msg116418.html), mostly
> > > the code is the same except patches 25+ which are new.
...
> > >
> > > Branch info:
> > > - tree: https://github.com/t-kristo/linux-pm.git
> > > - branch: for-4.2/ti-clk-move
> >
> > I can't replicate your test results. Several Kconfigs fail to build here,
> > and many boards don't even boot.
> >
> > Could you please post a copy of your boot logs?
> >
> > - Paul
> >
> > http://www.pwsan.com/omap/testlogs/test-tkristo-clk-move-v4.2/20150511115145/
> >
> > OMAP development test results for test-tkristo-clk-move-v4.2 20150511115145
>
> Oh hmm, I seem to have introduced a Makefile issue which breaks a couple of
> special builds. I just force pushed updated branch.
This one is better... the build problems are now fixed.
> Here are the boot logs for it, I tried also single-soc builds with
> am3/am4/omap2/omap3/omap4/omap5/dra7:
>
> : Board : Boot url
> 1: am335x-evm : PASS http://paste.ubuntu.com/11093628/
> 2: am335x-evmsk : PASS http://paste.ubuntu.com/11093629/
> 3: am3517-evm : PASS http://paste.ubuntu.com/11093630/
> 4: am37x-evm : PASS http://paste.ubuntu.com/11093632/
> 5: am43x-epos-evm : PASS http://paste.ubuntu.com/11093633/
> 6: am437x-gp-evm : PASS http://paste.ubuntu.com/11093634/
> 7: am57xx-evm : FAIL http://paste.ubuntu.com/11093635/
> 8: omap3-beagle-xm : PASS http://paste.ubuntu.com/11093636/
> 9: omap3-beagle : PASS http://paste.ubuntu.com/11093637/
> 10: am335x-boneblack: PASS http://paste.ubuntu.com/11093638/
> 11: am335x-bone : PASS http://paste.ubuntu.com/11093639/
> 12: craneboard : PASS http://paste.ubuntu.com/11093640/
> 13: dra7xx-evm : PASS http://paste.ubuntu.com/11093641/
> 14: omap3430-ldp : PASS http://paste.ubuntu.com/11093642/
> 15: omap3-n900 : PASS http://paste.ubuntu.com/11093643/
> 16: omap5-uevm : PASS http://paste.ubuntu.com/11093645/
> 17: omap4-panda-es : PASS http://paste.ubuntu.com/11093646/
> 18: omap4-panda : PASS http://paste.ubuntu.com/11093647/
> 19: omap2430-sdp : PASS http://paste.ubuntu.com/11093648/
> 20: omap3430-sdp : PASS http://paste.ubuntu.com/11093649/
> 21: omap4-sdp-es23plus: PASS http://paste.ubuntu.com/11093650/
> TOTAL = 21 boards, Booted Boards = 20, No Boot boards = 1
>
> AM57xx-evm boot fails as it is missing some patches from Nishanth (I think the
> UART mux has changed.)
But this one has the same problems as v4.1-rc1 and beyond: it still
doesn't boot here on any OMAP34xx/OMAP35xx platform, nor the CM-T3517,
OMAP4460 VAR-SOM-OM, or OMAP5430ES2 SBC-T54:
http://www.pwsan.com/omap/testlogs/test_v4.1-rc1/20150426200156/README.txt
Thanks for posting your test logs above. They don't include bootloader
info, but my guess is that v4.1-rc* has some hidden bootloader
dependencies where things aren't being initialized properly from the
kernel.
So those should be tracked down and fixed before we stack more patches on
top.
- Paul
http://www.pwsan.com/omap/testlogs/test-tkristo-clk-move-v4.2/20150512121218/
OMAP development test results for test-tkristo-clk-move-v4.2 20150512121218
Test summary
------------
Build: uImage:
Pass ( 3/ 3): omap1_defconfig, omap1_defconfig_1510innovator_only,
omap1_defconfig_5912osk_only
Build: uImage+dtb:
Pass (13/13): omap2plus_defconfig_am33xx_only/am335x-bone,
omap2plus_defconfig/omap4-panda,
omap2plus_defconfig/omap4-panda-es,
omap2plus_defconfig/omap4-var-som,
omap2plus_defconfig/omap3-evm-37xx,
omap2plus_defconfig_n800_only_a/omap2420-n800,
omap2plus_defconfig/omap2430-sdp,
omap2plus_defconfig/am3517-evm,
omap2plus_defconfig/omap3-beagle,
omap2plus_defconfig/omap3-beagle-xm,
omap2plus_defconfig/omap3-sbc-t3517,
omap2plus_defconfig/omap5-uevm,
omap2plus_defconfig/omap5-sbc-t54
Build: zImage:
Pass (17/17): omap2plus_defconfig, omap2plus_defconfig_am33xx_only,
omap2plus_defconfig_n800_only_a,
omap2plus_defconfig_n800_multi_omap2xxx,
omap2plus_defconfig_2430sdp_only,
omap2plus_defconfig_cpupm, omap2plus_defconfig_no_pm,
omap2plus_defconfig_omap2_4_only,
omap2plus_defconfig_omap3_4_only,
omap2plus_defconfig_omap5_only,
omap2plus_defconfig_dra7xx_only,
omap2plus_defconfig_am43xx_only,
rmk_omap3430_ldp_oldconfig,
rmk_omap3430_ldp_allnoconfig,
rmk_omap4430_sdp_oldconfig,
rmk_omap4430_sdp_allnoconfig, multi_v7_defconfig
Build warnings from toolchain: uImage:
FAIL ( 3/ 3): omap1_defconfig, omap1_defconfig_1510innovator_only,
omap1_defconfig_5912osk_only
Build warnings from toolchain: uImage+dtb:
(none)
Build warnings from toolchain: zImage:
FAIL (14/17): omap2plus_defconfig, omap2plus_defconfig_am33xx_only,
omap2plus_defconfig_n800_only_a,
omap2plus_defconfig_n800_multi_omap2xxx,
omap2plus_defconfig_2430sdp_only,
omap2plus_defconfig_cpupm, omap2plus_defconfig_no_pm,
omap2plus_defconfig_omap2_4_only,
omap2plus_defconfig_omap3_4_only,
omap2plus_defconfig_omap5_only,
omap2plus_defconfig_dra7xx_only,
omap2plus_defconfig_am43xx_only,
rmk_omap3430_ldp_oldconfig,
rmk_omap4430_sdp_oldconfig
Boot to userspace:
FAIL ( 6/17): 4460varsomom, 2430sdp, 3530es3beagle, 3530es31beagle,
cmt3517, 5430es2sbct54
skip ( 2/17): 5912osk, 3517evm
Pass ( 9/17): am335xbonelt, am335xbone, 4430es2panda, 4460pandaes,
37xxevm, 3730beaglexm, 3730es12beaglexm, 5430es2uevm,
2420n800
Kernel warnings during boot to userspace:
FAIL ( 1/17): 4430es2panda
PM: chip retention via suspend:
FAIL ( 9/12): am335xbonelt, 4430es2panda, 4460varsomom,
3530es3beagle, 3530es31beagle, 3730es12beaglexm,
2430sdp, 5430es2uevm, 5430es2sbct54
Pass ( 3/12): 4460pandaes, 37xxevm, 3730beaglexm
PM: chip retention via dynamic idle:
FAIL ( 9/12): am335xbonelt, 4430es2panda, 4460varsomom,
3530es3beagle, 3530es31beagle, 3730es12beaglexm,
2430sdp, 5430es2uevm, 5430es2sbct54
Pass ( 3/12): 4460pandaes, 37xxevm, 3730beaglexm
PM: chip off (except CORE, due to errata) via suspend:
Pass ( 1/ 1): 3730beaglexm
PM: chip off (except CORE, due to errata) via dynamic idle:
Pass ( 1/ 1): 3730beaglexm
PM: chip off via suspend:
FAIL ( 3/ 4): 3530es3beagle, 3530es31beagle, 3730es12beaglexm
Pass ( 1/ 4): 37xxevm
PM: chip off via dynamic idle:
FAIL ( 3/ 4): 3530es3beagle, 3530es31beagle, 3730es12beaglexm
Pass ( 1/ 4): 37xxevm
Kernel warnings during PM test:
FAIL ( 1/17): 4430es2panda
Obsolete Kconfig symbols:
FAIL ( 1/20): multi_v7_defconfig
vmlinux object size
(delta in bytes from test_v4.1-rc2 (5ebe6afaf0057ac3eaeb98defd5456894b446d22)):
text data bss total kernel
0 0 0 0 omap1_defconfig
0 0 0 0 omap1_defconfig_1510innovator_only
0 0 0 0 omap1_defconfig_5912osk_only
-1492 -8 0 -1500 multi_v7_defconfig
-2116 +56 0 -2060 omap2plus_defconfig
0 0 0 0 omap2plus_defconfig_2430sdp_only
-1476 0 +64 -1412 omap2plus_defconfig_am33xx_only
-5572 0 +64 -5508 omap2plus_defconfig_am43xx_only
-6148 +56 -64 -6156 omap2plus_defconfig_cpupm
-5500 0 +64 -5436 omap2plus_defconfig_dra7xx_only
-1668 0 +12 -1656 omap2plus_defconfig_n800_multi_omap2xxx
-1636 -8 -20 -1664 omap2plus_defconfig_n800_only_a
-6212 -8 0 -6220 omap2plus_defconfig_no_pm
-5828 0 -64 -5892 omap2plus_defconfig_omap2_4_only
-1916 -8 0 -1924 omap2plus_defconfig_omap3_4_only
-1412 0 0 -1412 omap2plus_defconfig_omap5_only
-2804 -4 +780 -2028 rmk_omap3430_ldp_allnoconfig
-1812 -8 +64 -1756 rmk_omap3430_ldp_oldconfig
-2332 0 +956 -1376 rmk_omap4430_sdp_allnoconfig
-1336 +64 0 -1272 rmk_omap4430_sdp_oldconfig
Boot-time memory difference
(delta in bytes from test_v4.1-rc2 (5ebe6afaf0057ac3eaeb98defd5456894b446d22))
avail rsrvd high freed board kconfig
-4k 4k . . 5430es2sbct54 omap2plus_defconfig
. . . 4k am335xbone omap2plus_defconfig_am33xx_only
^ permalink raw reply [flat|nested] 120+ messages in thread
* Re: [PATCHv2 00/27] ARM: OMAP2+: clock code migration to drivers/clk/ti
2015-05-12 20:58 ` Paul Walmsley
(?)
@ 2015-05-13 6:46 ` Tero Kristo
-1 siblings, 0 replies; 120+ messages in thread
From: Tero Kristo @ 2015-05-13 6:46 UTC (permalink / raw)
To: Paul Walmsley
Cc: mturquette, tony, linux-omap, linux-clk, sboyd, linux-arm-kernel
On 05/12/2015 11:58 PM, Paul Walmsley wrote:
> On Tue, 12 May 2015, Tero Kristo wrote:
>
>> On 05/11/2015 11:21 PM, Paul Walmsley wrote:
>>> On Mon, 11 May 2015, Tero Kristo wrote:
>>>
>>>> This set moves most of the OMAP2+ clock driver code under drivers/clk.
>>>> There are still a couple of files under mach-omap2 folder after this
>>>> set which have either unmet dependencies still (towards PRCM driver)
>>>> or is currently slightly broken (some of the DVFS code for OMAP2/OMAP3.)
>>>> Earlier version of this set has been posted back in March (see
>>>> http://www.spinics.net/lists/linux-omap/msg116418.html), mostly
>>>> the code is the same except patches 25+ which are new.
>
> ...
>
>>>>
>>>> Branch info:
>>>> - tree: https://github.com/t-kristo/linux-pm.git
>>>> - branch: for-4.2/ti-clk-move
>>>
>>> I can't replicate your test results. Several Kconfigs fail to build here,
>>> and many boards don't even boot.
>>>
>>> Could you please post a copy of your boot logs?
>>>
>>> - Paul
>>>
>>> http://www.pwsan.com/omap/testlogs/test-tkristo-clk-move-v4.2/20150511115145/
>>>
>>> OMAP development test results for test-tkristo-clk-move-v4.2 20150511115145
>>
>> Oh hmm, I seem to have introduced a Makefile issue which breaks a couple of
>> special builds. I just force pushed updated branch.
>
> This one is better... the build problems are now fixed.
>
>> Here are the boot logs for it, I tried also single-soc builds with
>> am3/am4/omap2/omap3/omap4/omap5/dra7:
>>
>> : Board : Boot url
>> 1: am335x-evm : PASS http://paste.ubuntu.com/11093628/
>> 2: am335x-evmsk : PASS http://paste.ubuntu.com/11093629/
>> 3: am3517-evm : PASS http://paste.ubuntu.com/11093630/
>> 4: am37x-evm : PASS http://paste.ubuntu.com/11093632/
>> 5: am43x-epos-evm : PASS http://paste.ubuntu.com/11093633/
>> 6: am437x-gp-evm : PASS http://paste.ubuntu.com/11093634/
>> 7: am57xx-evm : FAIL http://paste.ubuntu.com/11093635/
>> 8: omap3-beagle-xm : PASS http://paste.ubuntu.com/11093636/
>> 9: omap3-beagle : PASS http://paste.ubuntu.com/11093637/
>> 10: am335x-boneblack: PASS http://paste.ubuntu.com/11093638/
>> 11: am335x-bone : PASS http://paste.ubuntu.com/11093639/
>> 12: craneboard : PASS http://paste.ubuntu.com/11093640/
>> 13: dra7xx-evm : PASS http://paste.ubuntu.com/11093641/
>> 14: omap3430-ldp : PASS http://paste.ubuntu.com/11093642/
>> 15: omap3-n900 : PASS http://paste.ubuntu.com/11093643/
>> 16: omap5-uevm : PASS http://paste.ubuntu.com/11093645/
>> 17: omap4-panda-es : PASS http://paste.ubuntu.com/11093646/
>> 18: omap4-panda : PASS http://paste.ubuntu.com/11093647/
>> 19: omap2430-sdp : PASS http://paste.ubuntu.com/11093648/
>> 20: omap3430-sdp : PASS http://paste.ubuntu.com/11093649/
>> 21: omap4-sdp-es23plus: PASS http://paste.ubuntu.com/11093650/
>> TOTAL = 21 boards, Booted Boards = 20, No Boot boards = 1
>>
>> AM57xx-evm boot fails as it is missing some patches from Nishanth (I think the
>> UART mux has changed.)
>
> But this one has the same problems as v4.1-rc1 and beyond: it still
> doesn't boot here on any OMAP34xx/OMAP35xx platform, nor the CM-T3517,
> OMAP4460 VAR-SOM-OM, or OMAP5430ES2 SBC-T54:
>
> http://www.pwsan.com/omap/testlogs/test_v4.1-rc1/20150426200156/README.txt
>
> Thanks for posting your test logs above. They don't include bootloader
> info, but my guess is that v4.1-rc* has some hidden bootloader
> dependencies where things aren't being initialized properly from the
> kernel.
>
> So those should be tracked down and fixed before we stack more patches on
> top.
I clipped the boot-loader traces as they contain lots of noise from the
test-automation system.
Looking at the farm traces, I see this on the omap3 boards:
beagleboard-vanilla.txt:ver=U-Boot 2014.04-00071-g8543283 (Apr 22 2014 -
15:49:50)
beagle-xm.txt:U-Boot 2014.10-00004-g9ade0ab-dirty (Dec 16 2014 - 13:40:24)
craneboard.txt:U-Boot 2009.11-00005-ge83d2db (Dec 07 2010 - 11:55:34)
ldp.txt:U-Boot 2014.04-00071-g8543283-dirty (Apr 25 2014 - 14:59:48)
n900.txt:U-Boot 2014.04-00073-g4fa5b9e (Apr 22 2014 - 14:37:10)
sdp3430.txt:U-Boot 2009.11-rc1-00485-g7d1e865 (Nov 09 2009 - 11:21:55)
Maybe some DTB issues? When did you update your DTB files?
-Tero
>
>
> - Paul
>
>
> http://www.pwsan.com/omap/testlogs/test-tkristo-clk-move-v4.2/20150512121218/
>
>
> OMAP development test results for test-tkristo-clk-move-v4.2 20150512121218
>
>
> Test summary
> ------------
>
> Build: uImage:
> Pass ( 3/ 3): omap1_defconfig, omap1_defconfig_1510innovator_only,
> omap1_defconfig_5912osk_only
>
> Build: uImage+dtb:
> Pass (13/13): omap2plus_defconfig_am33xx_only/am335x-bone,
> omap2plus_defconfig/omap4-panda,
> omap2plus_defconfig/omap4-panda-es,
> omap2plus_defconfig/omap4-var-som,
> omap2plus_defconfig/omap3-evm-37xx,
> omap2plus_defconfig_n800_only_a/omap2420-n800,
> omap2plus_defconfig/omap2430-sdp,
> omap2plus_defconfig/am3517-evm,
> omap2plus_defconfig/omap3-beagle,
> omap2plus_defconfig/omap3-beagle-xm,
> omap2plus_defconfig/omap3-sbc-t3517,
> omap2plus_defconfig/omap5-uevm,
> omap2plus_defconfig/omap5-sbc-t54
>
> Build: zImage:
> Pass (17/17): omap2plus_defconfig, omap2plus_defconfig_am33xx_only,
> omap2plus_defconfig_n800_only_a,
> omap2plus_defconfig_n800_multi_omap2xxx,
> omap2plus_defconfig_2430sdp_only,
> omap2plus_defconfig_cpupm, omap2plus_defconfig_no_pm,
> omap2plus_defconfig_omap2_4_only,
> omap2plus_defconfig_omap3_4_only,
> omap2plus_defconfig_omap5_only,
> omap2plus_defconfig_dra7xx_only,
> omap2plus_defconfig_am43xx_only,
> rmk_omap3430_ldp_oldconfig,
> rmk_omap3430_ldp_allnoconfig,
> rmk_omap4430_sdp_oldconfig,
> rmk_omap4430_sdp_allnoconfig, multi_v7_defconfig
>
> Build warnings from toolchain: uImage:
> FAIL ( 3/ 3): omap1_defconfig, omap1_defconfig_1510innovator_only,
> omap1_defconfig_5912osk_only
>
> Build warnings from toolchain: uImage+dtb:
> (none)
>
> Build warnings from toolchain: zImage:
> FAIL (14/17): omap2plus_defconfig, omap2plus_defconfig_am33xx_only,
> omap2plus_defconfig_n800_only_a,
> omap2plus_defconfig_n800_multi_omap2xxx,
> omap2plus_defconfig_2430sdp_only,
> omap2plus_defconfig_cpupm, omap2plus_defconfig_no_pm,
> omap2plus_defconfig_omap2_4_only,
> omap2plus_defconfig_omap3_4_only,
> omap2plus_defconfig_omap5_only,
> omap2plus_defconfig_dra7xx_only,
> omap2plus_defconfig_am43xx_only,
> rmk_omap3430_ldp_oldconfig,
> rmk_omap4430_sdp_oldconfig
>
> Boot to userspace:
> FAIL ( 6/17): 4460varsomom, 2430sdp, 3530es3beagle, 3530es31beagle,
> cmt3517, 5430es2sbct54
> skip ( 2/17): 5912osk, 3517evm
> Pass ( 9/17): am335xbonelt, am335xbone, 4430es2panda, 4460pandaes,
> 37xxevm, 3730beaglexm, 3730es12beaglexm, 5430es2uevm,
> 2420n800
>
> Kernel warnings during boot to userspace:
> FAIL ( 1/17): 4430es2panda
>
> PM: chip retention via suspend:
> FAIL ( 9/12): am335xbonelt, 4430es2panda, 4460varsomom,
> 3530es3beagle, 3530es31beagle, 3730es12beaglexm,
> 2430sdp, 5430es2uevm, 5430es2sbct54
> Pass ( 3/12): 4460pandaes, 37xxevm, 3730beaglexm
>
> PM: chip retention via dynamic idle:
> FAIL ( 9/12): am335xbonelt, 4430es2panda, 4460varsomom,
> 3530es3beagle, 3530es31beagle, 3730es12beaglexm,
> 2430sdp, 5430es2uevm, 5430es2sbct54
> Pass ( 3/12): 4460pandaes, 37xxevm, 3730beaglexm
>
> PM: chip off (except CORE, due to errata) via suspend:
> Pass ( 1/ 1): 3730beaglexm
>
> PM: chip off (except CORE, due to errata) via dynamic idle:
> Pass ( 1/ 1): 3730beaglexm
>
> PM: chip off via suspend:
> FAIL ( 3/ 4): 3530es3beagle, 3530es31beagle, 3730es12beaglexm
> Pass ( 1/ 4): 37xxevm
>
> PM: chip off via dynamic idle:
> FAIL ( 3/ 4): 3530es3beagle, 3530es31beagle, 3730es12beaglexm
> Pass ( 1/ 4): 37xxevm
>
> Kernel warnings during PM test:
> FAIL ( 1/17): 4430es2panda
>
> Obsolete Kconfig symbols:
> FAIL ( 1/20): multi_v7_defconfig
>
>
> vmlinux object size
> (delta in bytes from test_v4.1-rc2 (5ebe6afaf0057ac3eaeb98defd5456894b446d22)):
> text data bss total kernel
> 0 0 0 0 omap1_defconfig
> 0 0 0 0 omap1_defconfig_1510innovator_only
> 0 0 0 0 omap1_defconfig_5912osk_only
> -1492 -8 0 -1500 multi_v7_defconfig
> -2116 +56 0 -2060 omap2plus_defconfig
> 0 0 0 0 omap2plus_defconfig_2430sdp_only
> -1476 0 +64 -1412 omap2plus_defconfig_am33xx_only
> -5572 0 +64 -5508 omap2plus_defconfig_am43xx_only
> -6148 +56 -64 -6156 omap2plus_defconfig_cpupm
> -5500 0 +64 -5436 omap2plus_defconfig_dra7xx_only
> -1668 0 +12 -1656 omap2plus_defconfig_n800_multi_omap2xxx
> -1636 -8 -20 -1664 omap2plus_defconfig_n800_only_a
> -6212 -8 0 -6220 omap2plus_defconfig_no_pm
> -5828 0 -64 -5892 omap2plus_defconfig_omap2_4_only
> -1916 -8 0 -1924 omap2plus_defconfig_omap3_4_only
> -1412 0 0 -1412 omap2plus_defconfig_omap5_only
> -2804 -4 +780 -2028 rmk_omap3430_ldp_allnoconfig
> -1812 -8 +64 -1756 rmk_omap3430_ldp_oldconfig
> -2332 0 +956 -1376 rmk_omap4430_sdp_allnoconfig
> -1336 +64 0 -1272 rmk_omap4430_sdp_oldconfig
>
> Boot-time memory difference
> (delta in bytes from test_v4.1-rc2 (5ebe6afaf0057ac3eaeb98defd5456894b446d22))
> avail rsrvd high freed board kconfig
> -4k 4k . . 5430es2sbct54 omap2plus_defconfig
> . . . 4k am335xbone omap2plus_defconfig_am33xx_only
>
^ permalink raw reply [flat|nested] 120+ messages in thread
* Re: [PATCHv2 00/27] ARM: OMAP2+: clock code migration to drivers/clk/ti
@ 2015-05-13 6:46 ` Tero Kristo
0 siblings, 0 replies; 120+ messages in thread
From: Tero Kristo @ 2015-05-13 6:46 UTC (permalink / raw)
To: Paul Walmsley
Cc: mturquette, tony, linux-omap, linux-clk, sboyd, linux-arm-kernel
On 05/12/2015 11:58 PM, Paul Walmsley wrote:
> On Tue, 12 May 2015, Tero Kristo wrote:
>
>> On 05/11/2015 11:21 PM, Paul Walmsley wrote:
>>> On Mon, 11 May 2015, Tero Kristo wrote:
>>>
>>>> This set moves most of the OMAP2+ clock driver code under drivers/clk.
>>>> There are still a couple of files under mach-omap2 folder after this
>>>> set which have either unmet dependencies still (towards PRCM driver)
>>>> or is currently slightly broken (some of the DVFS code for OMAP2/OMAP3.)
>>>> Earlier version of this set has been posted back in March (see
>>>> http://www.spinics.net/lists/linux-omap/msg116418.html), mostly
>>>> the code is the same except patches 25+ which are new.
>
> ...
>
>>>>
>>>> Branch info:
>>>> - tree: https://github.com/t-kristo/linux-pm.git
>>>> - branch: for-4.2/ti-clk-move
>>>
>>> I can't replicate your test results. Several Kconfigs fail to build here,
>>> and many boards don't even boot.
>>>
>>> Could you please post a copy of your boot logs?
>>>
>>> - Paul
>>>
>>> http://www.pwsan.com/omap/testlogs/test-tkristo-clk-move-v4.2/20150511115145/
>>>
>>> OMAP development test results for test-tkristo-clk-move-v4.2 20150511115145
>>
>> Oh hmm, I seem to have introduced a Makefile issue which breaks a couple of
>> special builds. I just force pushed updated branch.
>
> This one is better... the build problems are now fixed.
>
>> Here are the boot logs for it, I tried also single-soc builds with
>> am3/am4/omap2/omap3/omap4/omap5/dra7:
>>
>> : Board : Boot url
>> 1: am335x-evm : PASS http://paste.ubuntu.com/11093628/
>> 2: am335x-evmsk : PASS http://paste.ubuntu.com/11093629/
>> 3: am3517-evm : PASS http://paste.ubuntu.com/11093630/
>> 4: am37x-evm : PASS http://paste.ubuntu.com/11093632/
>> 5: am43x-epos-evm : PASS http://paste.ubuntu.com/11093633/
>> 6: am437x-gp-evm : PASS http://paste.ubuntu.com/11093634/
>> 7: am57xx-evm : FAIL http://paste.ubuntu.com/11093635/
>> 8: omap3-beagle-xm : PASS http://paste.ubuntu.com/11093636/
>> 9: omap3-beagle : PASS http://paste.ubuntu.com/11093637/
>> 10: am335x-boneblack: PASS http://paste.ubuntu.com/11093638/
>> 11: am335x-bone : PASS http://paste.ubuntu.com/11093639/
>> 12: craneboard : PASS http://paste.ubuntu.com/11093640/
>> 13: dra7xx-evm : PASS http://paste.ubuntu.com/11093641/
>> 14: omap3430-ldp : PASS http://paste.ubuntu.com/11093642/
>> 15: omap3-n900 : PASS http://paste.ubuntu.com/11093643/
>> 16: omap5-uevm : PASS http://paste.ubuntu.com/11093645/
>> 17: omap4-panda-es : PASS http://paste.ubuntu.com/11093646/
>> 18: omap4-panda : PASS http://paste.ubuntu.com/11093647/
>> 19: omap2430-sdp : PASS http://paste.ubuntu.com/11093648/
>> 20: omap3430-sdp : PASS http://paste.ubuntu.com/11093649/
>> 21: omap4-sdp-es23plus: PASS http://paste.ubuntu.com/11093650/
>> TOTAL = 21 boards, Booted Boards = 20, No Boot boards = 1
>>
>> AM57xx-evm boot fails as it is missing some patches from Nishanth (I think the
>> UART mux has changed.)
>
> But this one has the same problems as v4.1-rc1 and beyond: it still
> doesn't boot here on any OMAP34xx/OMAP35xx platform, nor the CM-T3517,
> OMAP4460 VAR-SOM-OM, or OMAP5430ES2 SBC-T54:
>
> http://www.pwsan.com/omap/testlogs/test_v4.1-rc1/20150426200156/README.txt
>
> Thanks for posting your test logs above. They don't include bootloader
> info, but my guess is that v4.1-rc* has some hidden bootloader
> dependencies where things aren't being initialized properly from the
> kernel.
>
> So those should be tracked down and fixed before we stack more patches on
> top.
I clipped the boot-loader traces as they contain lots of noise from the
test-automation system.
Looking at the farm traces, I see this on the omap3 boards:
beagleboard-vanilla.txt:ver=U-Boot 2014.04-00071-g8543283 (Apr 22 2014 -
15:49:50)
beagle-xm.txt:U-Boot 2014.10-00004-g9ade0ab-dirty (Dec 16 2014 - 13:40:24)
craneboard.txt:U-Boot 2009.11-00005-ge83d2db (Dec 07 2010 - 11:55:34)
ldp.txt:U-Boot 2014.04-00071-g8543283-dirty (Apr 25 2014 - 14:59:48)
n900.txt:U-Boot 2014.04-00073-g4fa5b9e (Apr 22 2014 - 14:37:10)
sdp3430.txt:U-Boot 2009.11-rc1-00485-g7d1e865 (Nov 09 2009 - 11:21:55)
Maybe some DTB issues? When did you update your DTB files?
-Tero
>
>
> - Paul
>
>
> http://www.pwsan.com/omap/testlogs/test-tkristo-clk-move-v4.2/20150512121218/
>
>
> OMAP development test results for test-tkristo-clk-move-v4.2 20150512121218
>
>
> Test summary
> ------------
>
> Build: uImage:
> Pass ( 3/ 3): omap1_defconfig, omap1_defconfig_1510innovator_only,
> omap1_defconfig_5912osk_only
>
> Build: uImage+dtb:
> Pass (13/13): omap2plus_defconfig_am33xx_only/am335x-bone,
> omap2plus_defconfig/omap4-panda,
> omap2plus_defconfig/omap4-panda-es,
> omap2plus_defconfig/omap4-var-som,
> omap2plus_defconfig/omap3-evm-37xx,
> omap2plus_defconfig_n800_only_a/omap2420-n800,
> omap2plus_defconfig/omap2430-sdp,
> omap2plus_defconfig/am3517-evm,
> omap2plus_defconfig/omap3-beagle,
> omap2plus_defconfig/omap3-beagle-xm,
> omap2plus_defconfig/omap3-sbc-t3517,
> omap2plus_defconfig/omap5-uevm,
> omap2plus_defconfig/omap5-sbc-t54
>
> Build: zImage:
> Pass (17/17): omap2plus_defconfig, omap2plus_defconfig_am33xx_only,
> omap2plus_defconfig_n800_only_a,
> omap2plus_defconfig_n800_multi_omap2xxx,
> omap2plus_defconfig_2430sdp_only,
> omap2plus_defconfig_cpupm, omap2plus_defconfig_no_pm,
> omap2plus_defconfig_omap2_4_only,
> omap2plus_defconfig_omap3_4_only,
> omap2plus_defconfig_omap5_only,
> omap2plus_defconfig_dra7xx_only,
> omap2plus_defconfig_am43xx_only,
> rmk_omap3430_ldp_oldconfig,
> rmk_omap3430_ldp_allnoconfig,
> rmk_omap4430_sdp_oldconfig,
> rmk_omap4430_sdp_allnoconfig, multi_v7_defconfig
>
> Build warnings from toolchain: uImage:
> FAIL ( 3/ 3): omap1_defconfig, omap1_defconfig_1510innovator_only,
> omap1_defconfig_5912osk_only
>
> Build warnings from toolchain: uImage+dtb:
> (none)
>
> Build warnings from toolchain: zImage:
> FAIL (14/17): omap2plus_defconfig, omap2plus_defconfig_am33xx_only,
> omap2plus_defconfig_n800_only_a,
> omap2plus_defconfig_n800_multi_omap2xxx,
> omap2plus_defconfig_2430sdp_only,
> omap2plus_defconfig_cpupm, omap2plus_defconfig_no_pm,
> omap2plus_defconfig_omap2_4_only,
> omap2plus_defconfig_omap3_4_only,
> omap2plus_defconfig_omap5_only,
> omap2plus_defconfig_dra7xx_only,
> omap2plus_defconfig_am43xx_only,
> rmk_omap3430_ldp_oldconfig,
> rmk_omap4430_sdp_oldconfig
>
> Boot to userspace:
> FAIL ( 6/17): 4460varsomom, 2430sdp, 3530es3beagle, 3530es31beagle,
> cmt3517, 5430es2sbct54
> skip ( 2/17): 5912osk, 3517evm
> Pass ( 9/17): am335xbonelt, am335xbone, 4430es2panda, 4460pandaes,
> 37xxevm, 3730beaglexm, 3730es12beaglexm, 5430es2uevm,
> 2420n800
>
> Kernel warnings during boot to userspace:
> FAIL ( 1/17): 4430es2panda
>
> PM: chip retention via suspend:
> FAIL ( 9/12): am335xbonelt, 4430es2panda, 4460varsomom,
> 3530es3beagle, 3530es31beagle, 3730es12beaglexm,
> 2430sdp, 5430es2uevm, 5430es2sbct54
> Pass ( 3/12): 4460pandaes, 37xxevm, 3730beaglexm
>
> PM: chip retention via dynamic idle:
> FAIL ( 9/12): am335xbonelt, 4430es2panda, 4460varsomom,
> 3530es3beagle, 3530es31beagle, 3730es12beaglexm,
> 2430sdp, 5430es2uevm, 5430es2sbct54
> Pass ( 3/12): 4460pandaes, 37xxevm, 3730beaglexm
>
> PM: chip off (except CORE, due to errata) via suspend:
> Pass ( 1/ 1): 3730beaglexm
>
> PM: chip off (except CORE, due to errata) via dynamic idle:
> Pass ( 1/ 1): 3730beaglexm
>
> PM: chip off via suspend:
> FAIL ( 3/ 4): 3530es3beagle, 3530es31beagle, 3730es12beaglexm
> Pass ( 1/ 4): 37xxevm
>
> PM: chip off via dynamic idle:
> FAIL ( 3/ 4): 3530es3beagle, 3530es31beagle, 3730es12beaglexm
> Pass ( 1/ 4): 37xxevm
>
> Kernel warnings during PM test:
> FAIL ( 1/17): 4430es2panda
>
> Obsolete Kconfig symbols:
> FAIL ( 1/20): multi_v7_defconfig
>
>
> vmlinux object size
> (delta in bytes from test_v4.1-rc2 (5ebe6afaf0057ac3eaeb98defd5456894b446d22)):
> text data bss total kernel
> 0 0 0 0 omap1_defconfig
> 0 0 0 0 omap1_defconfig_1510innovator_only
> 0 0 0 0 omap1_defconfig_5912osk_only
> -1492 -8 0 -1500 multi_v7_defconfig
> -2116 +56 0 -2060 omap2plus_defconfig
> 0 0 0 0 omap2plus_defconfig_2430sdp_only
> -1476 0 +64 -1412 omap2plus_defconfig_am33xx_only
> -5572 0 +64 -5508 omap2plus_defconfig_am43xx_only
> -6148 +56 -64 -6156 omap2plus_defconfig_cpupm
> -5500 0 +64 -5436 omap2plus_defconfig_dra7xx_only
> -1668 0 +12 -1656 omap2plus_defconfig_n800_multi_omap2xxx
> -1636 -8 -20 -1664 omap2plus_defconfig_n800_only_a
> -6212 -8 0 -6220 omap2plus_defconfig_no_pm
> -5828 0 -64 -5892 omap2plus_defconfig_omap2_4_only
> -1916 -8 0 -1924 omap2plus_defconfig_omap3_4_only
> -1412 0 0 -1412 omap2plus_defconfig_omap5_only
> -2804 -4 +780 -2028 rmk_omap3430_ldp_allnoconfig
> -1812 -8 +64 -1756 rmk_omap3430_ldp_oldconfig
> -2332 0 +956 -1376 rmk_omap4430_sdp_allnoconfig
> -1336 +64 0 -1272 rmk_omap4430_sdp_oldconfig
>
> Boot-time memory difference
> (delta in bytes from test_v4.1-rc2 (5ebe6afaf0057ac3eaeb98defd5456894b446d22))
> avail rsrvd high freed board kconfig
> -4k 4k . . 5430es2sbct54 omap2plus_defconfig
> . . . 4k am335xbone omap2plus_defconfig_am33xx_only
>
^ permalink raw reply [flat|nested] 120+ messages in thread
* [PATCHv2 00/27] ARM: OMAP2+: clock code migration to drivers/clk/ti
@ 2015-05-13 6:46 ` Tero Kristo
0 siblings, 0 replies; 120+ messages in thread
From: Tero Kristo @ 2015-05-13 6:46 UTC (permalink / raw)
To: linux-arm-kernel
On 05/12/2015 11:58 PM, Paul Walmsley wrote:
> On Tue, 12 May 2015, Tero Kristo wrote:
>
>> On 05/11/2015 11:21 PM, Paul Walmsley wrote:
>>> On Mon, 11 May 2015, Tero Kristo wrote:
>>>
>>>> This set moves most of the OMAP2+ clock driver code under drivers/clk.
>>>> There are still a couple of files under mach-omap2 folder after this
>>>> set which have either unmet dependencies still (towards PRCM driver)
>>>> or is currently slightly broken (some of the DVFS code for OMAP2/OMAP3.)
>>>> Earlier version of this set has been posted back in March (see
>>>> http://www.spinics.net/lists/linux-omap/msg116418.html), mostly
>>>> the code is the same except patches 25+ which are new.
>
> ...
>
>>>>
>>>> Branch info:
>>>> - tree: https://github.com/t-kristo/linux-pm.git
>>>> - branch: for-4.2/ti-clk-move
>>>
>>> I can't replicate your test results. Several Kconfigs fail to build here,
>>> and many boards don't even boot.
>>>
>>> Could you please post a copy of your boot logs?
>>>
>>> - Paul
>>>
>>> http://www.pwsan.com/omap/testlogs/test-tkristo-clk-move-v4.2/20150511115145/
>>>
>>> OMAP development test results for test-tkristo-clk-move-v4.2 20150511115145
>>
>> Oh hmm, I seem to have introduced a Makefile issue which breaks a couple of
>> special builds. I just force pushed updated branch.
>
> This one is better... the build problems are now fixed.
>
>> Here are the boot logs for it, I tried also single-soc builds with
>> am3/am4/omap2/omap3/omap4/omap5/dra7:
>>
>> : Board : Boot url
>> 1: am335x-evm : PASS http://paste.ubuntu.com/11093628/
>> 2: am335x-evmsk : PASS http://paste.ubuntu.com/11093629/
>> 3: am3517-evm : PASS http://paste.ubuntu.com/11093630/
>> 4: am37x-evm : PASS http://paste.ubuntu.com/11093632/
>> 5: am43x-epos-evm : PASS http://paste.ubuntu.com/11093633/
>> 6: am437x-gp-evm : PASS http://paste.ubuntu.com/11093634/
>> 7: am57xx-evm : FAIL http://paste.ubuntu.com/11093635/
>> 8: omap3-beagle-xm : PASS http://paste.ubuntu.com/11093636/
>> 9: omap3-beagle : PASS http://paste.ubuntu.com/11093637/
>> 10: am335x-boneblack: PASS http://paste.ubuntu.com/11093638/
>> 11: am335x-bone : PASS http://paste.ubuntu.com/11093639/
>> 12: craneboard : PASS http://paste.ubuntu.com/11093640/
>> 13: dra7xx-evm : PASS http://paste.ubuntu.com/11093641/
>> 14: omap3430-ldp : PASS http://paste.ubuntu.com/11093642/
>> 15: omap3-n900 : PASS http://paste.ubuntu.com/11093643/
>> 16: omap5-uevm : PASS http://paste.ubuntu.com/11093645/
>> 17: omap4-panda-es : PASS http://paste.ubuntu.com/11093646/
>> 18: omap4-panda : PASS http://paste.ubuntu.com/11093647/
>> 19: omap2430-sdp : PASS http://paste.ubuntu.com/11093648/
>> 20: omap3430-sdp : PASS http://paste.ubuntu.com/11093649/
>> 21: omap4-sdp-es23plus: PASS http://paste.ubuntu.com/11093650/
>> TOTAL = 21 boards, Booted Boards = 20, No Boot boards = 1
>>
>> AM57xx-evm boot fails as it is missing some patches from Nishanth (I think the
>> UART mux has changed.)
>
> But this one has the same problems as v4.1-rc1 and beyond: it still
> doesn't boot here on any OMAP34xx/OMAP35xx platform, nor the CM-T3517,
> OMAP4460 VAR-SOM-OM, or OMAP5430ES2 SBC-T54:
>
> http://www.pwsan.com/omap/testlogs/test_v4.1-rc1/20150426200156/README.txt
>
> Thanks for posting your test logs above. They don't include bootloader
> info, but my guess is that v4.1-rc* has some hidden bootloader
> dependencies where things aren't being initialized properly from the
> kernel.
>
> So those should be tracked down and fixed before we stack more patches on
> top.
I clipped the boot-loader traces as they contain lots of noise from the
test-automation system.
Looking at the farm traces, I see this on the omap3 boards:
beagleboard-vanilla.txt:ver=U-Boot 2014.04-00071-g8543283 (Apr 22 2014 -
15:49:50)
beagle-xm.txt:U-Boot 2014.10-00004-g9ade0ab-dirty (Dec 16 2014 - 13:40:24)
craneboard.txt:U-Boot 2009.11-00005-ge83d2db (Dec 07 2010 - 11:55:34)
ldp.txt:U-Boot 2014.04-00071-g8543283-dirty (Apr 25 2014 - 14:59:48)
n900.txt:U-Boot 2014.04-00073-g4fa5b9e (Apr 22 2014 - 14:37:10)
sdp3430.txt:U-Boot 2009.11-rc1-00485-g7d1e865 (Nov 09 2009 - 11:21:55)
Maybe some DTB issues? When did you update your DTB files?
-Tero
>
>
> - Paul
>
>
> http://www.pwsan.com/omap/testlogs/test-tkristo-clk-move-v4.2/20150512121218/
>
>
> OMAP development test results for test-tkristo-clk-move-v4.2 20150512121218
>
>
> Test summary
> ------------
>
> Build: uImage:
> Pass ( 3/ 3): omap1_defconfig, omap1_defconfig_1510innovator_only,
> omap1_defconfig_5912osk_only
>
> Build: uImage+dtb:
> Pass (13/13): omap2plus_defconfig_am33xx_only/am335x-bone,
> omap2plus_defconfig/omap4-panda,
> omap2plus_defconfig/omap4-panda-es,
> omap2plus_defconfig/omap4-var-som,
> omap2plus_defconfig/omap3-evm-37xx,
> omap2plus_defconfig_n800_only_a/omap2420-n800,
> omap2plus_defconfig/omap2430-sdp,
> omap2plus_defconfig/am3517-evm,
> omap2plus_defconfig/omap3-beagle,
> omap2plus_defconfig/omap3-beagle-xm,
> omap2plus_defconfig/omap3-sbc-t3517,
> omap2plus_defconfig/omap5-uevm,
> omap2plus_defconfig/omap5-sbc-t54
>
> Build: zImage:
> Pass (17/17): omap2plus_defconfig, omap2plus_defconfig_am33xx_only,
> omap2plus_defconfig_n800_only_a,
> omap2plus_defconfig_n800_multi_omap2xxx,
> omap2plus_defconfig_2430sdp_only,
> omap2plus_defconfig_cpupm, omap2plus_defconfig_no_pm,
> omap2plus_defconfig_omap2_4_only,
> omap2plus_defconfig_omap3_4_only,
> omap2plus_defconfig_omap5_only,
> omap2plus_defconfig_dra7xx_only,
> omap2plus_defconfig_am43xx_only,
> rmk_omap3430_ldp_oldconfig,
> rmk_omap3430_ldp_allnoconfig,
> rmk_omap4430_sdp_oldconfig,
> rmk_omap4430_sdp_allnoconfig, multi_v7_defconfig
>
> Build warnings from toolchain: uImage:
> FAIL ( 3/ 3): omap1_defconfig, omap1_defconfig_1510innovator_only,
> omap1_defconfig_5912osk_only
>
> Build warnings from toolchain: uImage+dtb:
> (none)
>
> Build warnings from toolchain: zImage:
> FAIL (14/17): omap2plus_defconfig, omap2plus_defconfig_am33xx_only,
> omap2plus_defconfig_n800_only_a,
> omap2plus_defconfig_n800_multi_omap2xxx,
> omap2plus_defconfig_2430sdp_only,
> omap2plus_defconfig_cpupm, omap2plus_defconfig_no_pm,
> omap2plus_defconfig_omap2_4_only,
> omap2plus_defconfig_omap3_4_only,
> omap2plus_defconfig_omap5_only,
> omap2plus_defconfig_dra7xx_only,
> omap2plus_defconfig_am43xx_only,
> rmk_omap3430_ldp_oldconfig,
> rmk_omap4430_sdp_oldconfig
>
> Boot to userspace:
> FAIL ( 6/17): 4460varsomom, 2430sdp, 3530es3beagle, 3530es31beagle,
> cmt3517, 5430es2sbct54
> skip ( 2/17): 5912osk, 3517evm
> Pass ( 9/17): am335xbonelt, am335xbone, 4430es2panda, 4460pandaes,
> 37xxevm, 3730beaglexm, 3730es12beaglexm, 5430es2uevm,
> 2420n800
>
> Kernel warnings during boot to userspace:
> FAIL ( 1/17): 4430es2panda
>
> PM: chip retention via suspend:
> FAIL ( 9/12): am335xbonelt, 4430es2panda, 4460varsomom,
> 3530es3beagle, 3530es31beagle, 3730es12beaglexm,
> 2430sdp, 5430es2uevm, 5430es2sbct54
> Pass ( 3/12): 4460pandaes, 37xxevm, 3730beaglexm
>
> PM: chip retention via dynamic idle:
> FAIL ( 9/12): am335xbonelt, 4430es2panda, 4460varsomom,
> 3530es3beagle, 3530es31beagle, 3730es12beaglexm,
> 2430sdp, 5430es2uevm, 5430es2sbct54
> Pass ( 3/12): 4460pandaes, 37xxevm, 3730beaglexm
>
> PM: chip off (except CORE, due to errata) via suspend:
> Pass ( 1/ 1): 3730beaglexm
>
> PM: chip off (except CORE, due to errata) via dynamic idle:
> Pass ( 1/ 1): 3730beaglexm
>
> PM: chip off via suspend:
> FAIL ( 3/ 4): 3530es3beagle, 3530es31beagle, 3730es12beaglexm
> Pass ( 1/ 4): 37xxevm
>
> PM: chip off via dynamic idle:
> FAIL ( 3/ 4): 3530es3beagle, 3530es31beagle, 3730es12beaglexm
> Pass ( 1/ 4): 37xxevm
>
> Kernel warnings during PM test:
> FAIL ( 1/17): 4430es2panda
>
> Obsolete Kconfig symbols:
> FAIL ( 1/20): multi_v7_defconfig
>
>
> vmlinux object size
> (delta in bytes from test_v4.1-rc2 (5ebe6afaf0057ac3eaeb98defd5456894b446d22)):
> text data bss total kernel
> 0 0 0 0 omap1_defconfig
> 0 0 0 0 omap1_defconfig_1510innovator_only
> 0 0 0 0 omap1_defconfig_5912osk_only
> -1492 -8 0 -1500 multi_v7_defconfig
> -2116 +56 0 -2060 omap2plus_defconfig
> 0 0 0 0 omap2plus_defconfig_2430sdp_only
> -1476 0 +64 -1412 omap2plus_defconfig_am33xx_only
> -5572 0 +64 -5508 omap2plus_defconfig_am43xx_only
> -6148 +56 -64 -6156 omap2plus_defconfig_cpupm
> -5500 0 +64 -5436 omap2plus_defconfig_dra7xx_only
> -1668 0 +12 -1656 omap2plus_defconfig_n800_multi_omap2xxx
> -1636 -8 -20 -1664 omap2plus_defconfig_n800_only_a
> -6212 -8 0 -6220 omap2plus_defconfig_no_pm
> -5828 0 -64 -5892 omap2plus_defconfig_omap2_4_only
> -1916 -8 0 -1924 omap2plus_defconfig_omap3_4_only
> -1412 0 0 -1412 omap2plus_defconfig_omap5_only
> -2804 -4 +780 -2028 rmk_omap3430_ldp_allnoconfig
> -1812 -8 +64 -1756 rmk_omap3430_ldp_oldconfig
> -2332 0 +956 -1376 rmk_omap4430_sdp_allnoconfig
> -1336 +64 0 -1272 rmk_omap4430_sdp_oldconfig
>
> Boot-time memory difference
> (delta in bytes from test_v4.1-rc2 (5ebe6afaf0057ac3eaeb98defd5456894b446d22))
> avail rsrvd high freed board kconfig
> -4k 4k . . 5430es2sbct54 omap2plus_defconfig
> . . . 4k am335xbone omap2plus_defconfig_am33xx_only
>
^ permalink raw reply [flat|nested] 120+ messages in thread
* Re: [PATCHv2 00/27] ARM: OMAP2+: clock code migration to drivers/clk/ti
2015-05-13 6:46 ` Tero Kristo
@ 2015-05-13 14:55 ` Paul Walmsley
-1 siblings, 0 replies; 120+ messages in thread
From: Paul Walmsley @ 2015-05-13 14:55 UTC (permalink / raw)
To: Tero Kristo
Cc: mturquette, tony, linux-omap, linux-clk, sboyd, linux-arm-kernel
On Wed, 13 May 2015, Tero Kristo wrote:
> I clipped the boot-loader traces as they contain lots of noise from the
> test-automation system.
>
> Looking at the farm traces, I see this on the omap3 boards:
>
> beagleboard-vanilla.txt:ver=U-Boot 2014.04-00071-g8543283 (Apr 22 2014 -
> 15:49:50)
>
> beagle-xm.txt:U-Boot 2014.10-00004-g9ade0ab-dirty (Dec 16 2014 - 13:40:24)
>
> craneboard.txt:U-Boot 2009.11-00005-ge83d2db (Dec 07 2010 - 11:55:34)
>
> ldp.txt:U-Boot 2014.04-00071-g8543283-dirty (Apr 25 2014 - 14:59:48)
>
> n900.txt:U-Boot 2014.04-00073-g4fa5b9e (Apr 22 2014 - 14:37:10)
>
> sdp3430.txt:U-Boot 2009.11-rc1-00485-g7d1e865 (Nov 09 2009 - 11:21:55)
>
> Maybe some DTB issues? When did you update your DTB files?
For all of the uImage+DTB boots, the DTB files in use follow the kernel
version:
http://www.pwsan.com/omap/testlogs/test_v4.1-rc1/20150426200156/dtbs/
which are then subsequently combined to produce:
http://www.pwsan.com/omap/testlogs/test_v4.1-rc1/20150426200156/dtcat/
So, using the OMAP35xx Beagle as an example, you can prove to yourself
that the current DTB is in use by observing that U-boot is loading a
combined uImage+DTB file of 3495180 bytes from here:
http://www.pwsan.com/omap/testlogs/test_v4.1-rc1/20150426200156/boot/3530es3beagle/3530es3beagle_log.txt
and comparing that with the size of this file (3495180 bytes):
http://www.pwsan.com/omap/testlogs/test_v4.1-rc1/20150426200156/dtcat/omap2plus_defconfig/uImage-dtb.omap3-beagle
and observing that this file size is the sum of the DTB file size (63180
bytes):
http://www.pwsan.com/omap/testlogs/test_v4.1-rc1/20150426200156/dtbs/omap3-beagle.dtb
and the zImage file size (3431936 bytes):
http://www.pwsan.com/omap/testlogs/test_v4.1-rc1/20150426200156/build_z/omap2plus_defconfig/zImage
and the 64 byte uImage header.
The only board that I suspect may be using an old DTB is the 4460
VAR-SOM-OM.
- Paul
^ permalink raw reply [flat|nested] 120+ messages in thread
* [PATCHv2 00/27] ARM: OMAP2+: clock code migration to drivers/clk/ti
@ 2015-05-13 14:55 ` Paul Walmsley
0 siblings, 0 replies; 120+ messages in thread
From: Paul Walmsley @ 2015-05-13 14:55 UTC (permalink / raw)
To: linux-arm-kernel
On Wed, 13 May 2015, Tero Kristo wrote:
> I clipped the boot-loader traces as they contain lots of noise from the
> test-automation system.
>
> Looking at the farm traces, I see this on the omap3 boards:
>
> beagleboard-vanilla.txt:ver=U-Boot 2014.04-00071-g8543283 (Apr 22 2014 -
> 15:49:50)
>
> beagle-xm.txt:U-Boot 2014.10-00004-g9ade0ab-dirty (Dec 16 2014 - 13:40:24)
>
> craneboard.txt:U-Boot 2009.11-00005-ge83d2db (Dec 07 2010 - 11:55:34)
>
> ldp.txt:U-Boot 2014.04-00071-g8543283-dirty (Apr 25 2014 - 14:59:48)
>
> n900.txt:U-Boot 2014.04-00073-g4fa5b9e (Apr 22 2014 - 14:37:10)
>
> sdp3430.txt:U-Boot 2009.11-rc1-00485-g7d1e865 (Nov 09 2009 - 11:21:55)
>
> Maybe some DTB issues? When did you update your DTB files?
For all of the uImage+DTB boots, the DTB files in use follow the kernel
version:
http://www.pwsan.com/omap/testlogs/test_v4.1-rc1/20150426200156/dtbs/
which are then subsequently combined to produce:
http://www.pwsan.com/omap/testlogs/test_v4.1-rc1/20150426200156/dtcat/
So, using the OMAP35xx Beagle as an example, you can prove to yourself
that the current DTB is in use by observing that U-boot is loading a
combined uImage+DTB file of 3495180 bytes from here:
http://www.pwsan.com/omap/testlogs/test_v4.1-rc1/20150426200156/boot/3530es3beagle/3530es3beagle_log.txt
and comparing that with the size of this file (3495180 bytes):
http://www.pwsan.com/omap/testlogs/test_v4.1-rc1/20150426200156/dtcat/omap2plus_defconfig/uImage-dtb.omap3-beagle
and observing that this file size is the sum of the DTB file size (63180
bytes):
http://www.pwsan.com/omap/testlogs/test_v4.1-rc1/20150426200156/dtbs/omap3-beagle.dtb
and the zImage file size (3431936 bytes):
http://www.pwsan.com/omap/testlogs/test_v4.1-rc1/20150426200156/build_z/omap2plus_defconfig/zImage
and the 64 byte uImage header.
The only board that I suspect may be using an old DTB is the 4460
VAR-SOM-OM.
- Paul
^ permalink raw reply [flat|nested] 120+ messages in thread
* Re: [PATCHv2 00/27] ARM: OMAP2+: clock code migration to drivers/clk/ti
2015-05-13 14:55 ` Paul Walmsley
(?)
@ 2015-05-19 19:23 ` Tero Kristo
-1 siblings, 0 replies; 120+ messages in thread
From: Tero Kristo @ 2015-05-19 19:23 UTC (permalink / raw)
To: Paul Walmsley
Cc: mturquette, tony, linux-omap, linux-clk, sboyd, linux-arm-kernel
On 05/13/2015 05:55 PM, Paul Walmsley wrote:
> On Wed, 13 May 2015, Tero Kristo wrote:
>
>> I clipped the boot-loader traces as they contain lots of noise from the
>> test-automation system.
>>
>> Looking at the farm traces, I see this on the omap3 boards:
>>
>> beagleboard-vanilla.txt:ver=U-Boot 2014.04-00071-g8543283 (Apr 22 2014 -
>> 15:49:50)
>>
>> beagle-xm.txt:U-Boot 2014.10-00004-g9ade0ab-dirty (Dec 16 2014 - 13:40:24)
>>
>> craneboard.txt:U-Boot 2009.11-00005-ge83d2db (Dec 07 2010 - 11:55:34)
>>
>> ldp.txt:U-Boot 2014.04-00071-g8543283-dirty (Apr 25 2014 - 14:59:48)
>>
>> n900.txt:U-Boot 2014.04-00073-g4fa5b9e (Apr 22 2014 - 14:37:10)
>>
>> sdp3430.txt:U-Boot 2009.11-rc1-00485-g7d1e865 (Nov 09 2009 - 11:21:55)
>>
>> Maybe some DTB issues? When did you update your DTB files?
>
> For all of the uImage+DTB boots, the DTB files in use follow the kernel
> version:
>
> http://www.pwsan.com/omap/testlogs/test_v4.1-rc1/20150426200156/dtbs/
>
> which are then subsequently combined to produce:
>
> http://www.pwsan.com/omap/testlogs/test_v4.1-rc1/20150426200156/dtcat/
>
> So, using the OMAP35xx Beagle as an example, you can prove to yourself
> that the current DTB is in use by observing that U-boot is loading a
> combined uImage+DTB file of 3495180 bytes from here:
>
> http://www.pwsan.com/omap/testlogs/test_v4.1-rc1/20150426200156/boot/3530es3beagle/3530es3beagle_log.txt
>
> and comparing that with the size of this file (3495180 bytes):
>
> http://www.pwsan.com/omap/testlogs/test_v4.1-rc1/20150426200156/dtcat/omap2plus_defconfig/uImage-dtb.omap3-beagle
>
> and observing that this file size is the sum of the DTB file size (63180
> bytes):
>
> http://www.pwsan.com/omap/testlogs/test_v4.1-rc1/20150426200156/dtbs/omap3-beagle.dtb
>
> and the zImage file size (3431936 bytes):
>
> http://www.pwsan.com/omap/testlogs/test_v4.1-rc1/20150426200156/build_z/omap2plus_defconfig/zImage
>
> and the 64 byte uImage header.
>
>
> The only board that I suspect may be using an old DTB is the 4460
> VAR-SOM-OM.
>
>
> - Paul
>
Any news on this? As noted previously, I am not able to reproduce the
issue you are seeing currently, can you give DEBUG_LL a shot?
-Tero
^ permalink raw reply [flat|nested] 120+ messages in thread
* Re: [PATCHv2 00/27] ARM: OMAP2+: clock code migration to drivers/clk/ti
@ 2015-05-19 19:23 ` Tero Kristo
0 siblings, 0 replies; 120+ messages in thread
From: Tero Kristo @ 2015-05-19 19:23 UTC (permalink / raw)
To: Paul Walmsley
Cc: mturquette, tony, linux-omap, linux-clk, sboyd, linux-arm-kernel
On 05/13/2015 05:55 PM, Paul Walmsley wrote:
> On Wed, 13 May 2015, Tero Kristo wrote:
>
>> I clipped the boot-loader traces as they contain lots of noise from the
>> test-automation system.
>>
>> Looking at the farm traces, I see this on the omap3 boards:
>>
>> beagleboard-vanilla.txt:ver=U-Boot 2014.04-00071-g8543283 (Apr 22 2014 -
>> 15:49:50)
>>
>> beagle-xm.txt:U-Boot 2014.10-00004-g9ade0ab-dirty (Dec 16 2014 - 13:40:24)
>>
>> craneboard.txt:U-Boot 2009.11-00005-ge83d2db (Dec 07 2010 - 11:55:34)
>>
>> ldp.txt:U-Boot 2014.04-00071-g8543283-dirty (Apr 25 2014 - 14:59:48)
>>
>> n900.txt:U-Boot 2014.04-00073-g4fa5b9e (Apr 22 2014 - 14:37:10)
>>
>> sdp3430.txt:U-Boot 2009.11-rc1-00485-g7d1e865 (Nov 09 2009 - 11:21:55)
>>
>> Maybe some DTB issues? When did you update your DTB files?
>
> For all of the uImage+DTB boots, the DTB files in use follow the kernel
> version:
>
> http://www.pwsan.com/omap/testlogs/test_v4.1-rc1/20150426200156/dtbs/
>
> which are then subsequently combined to produce:
>
> http://www.pwsan.com/omap/testlogs/test_v4.1-rc1/20150426200156/dtcat/
>
> So, using the OMAP35xx Beagle as an example, you can prove to yourself
> that the current DTB is in use by observing that U-boot is loading a
> combined uImage+DTB file of 3495180 bytes from here:
>
> http://www.pwsan.com/omap/testlogs/test_v4.1-rc1/20150426200156/boot/3530es3beagle/3530es3beagle_log.txt
>
> and comparing that with the size of this file (3495180 bytes):
>
> http://www.pwsan.com/omap/testlogs/test_v4.1-rc1/20150426200156/dtcat/omap2plus_defconfig/uImage-dtb.omap3-beagle
>
> and observing that this file size is the sum of the DTB file size (63180
> bytes):
>
> http://www.pwsan.com/omap/testlogs/test_v4.1-rc1/20150426200156/dtbs/omap3-beagle.dtb
>
> and the zImage file size (3431936 bytes):
>
> http://www.pwsan.com/omap/testlogs/test_v4.1-rc1/20150426200156/build_z/omap2plus_defconfig/zImage
>
> and the 64 byte uImage header.
>
>
> The only board that I suspect may be using an old DTB is the 4460
> VAR-SOM-OM.
>
>
> - Paul
>
Any news on this? As noted previously, I am not able to reproduce the
issue you are seeing currently, can you give DEBUG_LL a shot?
-Tero
^ permalink raw reply [flat|nested] 120+ messages in thread
* [PATCHv2 00/27] ARM: OMAP2+: clock code migration to drivers/clk/ti
@ 2015-05-19 19:23 ` Tero Kristo
0 siblings, 0 replies; 120+ messages in thread
From: Tero Kristo @ 2015-05-19 19:23 UTC (permalink / raw)
To: linux-arm-kernel
On 05/13/2015 05:55 PM, Paul Walmsley wrote:
> On Wed, 13 May 2015, Tero Kristo wrote:
>
>> I clipped the boot-loader traces as they contain lots of noise from the
>> test-automation system.
>>
>> Looking at the farm traces, I see this on the omap3 boards:
>>
>> beagleboard-vanilla.txt:ver=U-Boot 2014.04-00071-g8543283 (Apr 22 2014 -
>> 15:49:50)
>>
>> beagle-xm.txt:U-Boot 2014.10-00004-g9ade0ab-dirty (Dec 16 2014 - 13:40:24)
>>
>> craneboard.txt:U-Boot 2009.11-00005-ge83d2db (Dec 07 2010 - 11:55:34)
>>
>> ldp.txt:U-Boot 2014.04-00071-g8543283-dirty (Apr 25 2014 - 14:59:48)
>>
>> n900.txt:U-Boot 2014.04-00073-g4fa5b9e (Apr 22 2014 - 14:37:10)
>>
>> sdp3430.txt:U-Boot 2009.11-rc1-00485-g7d1e865 (Nov 09 2009 - 11:21:55)
>>
>> Maybe some DTB issues? When did you update your DTB files?
>
> For all of the uImage+DTB boots, the DTB files in use follow the kernel
> version:
>
> http://www.pwsan.com/omap/testlogs/test_v4.1-rc1/20150426200156/dtbs/
>
> which are then subsequently combined to produce:
>
> http://www.pwsan.com/omap/testlogs/test_v4.1-rc1/20150426200156/dtcat/
>
> So, using the OMAP35xx Beagle as an example, you can prove to yourself
> that the current DTB is in use by observing that U-boot is loading a
> combined uImage+DTB file of 3495180 bytes from here:
>
> http://www.pwsan.com/omap/testlogs/test_v4.1-rc1/20150426200156/boot/3530es3beagle/3530es3beagle_log.txt
>
> and comparing that with the size of this file (3495180 bytes):
>
> http://www.pwsan.com/omap/testlogs/test_v4.1-rc1/20150426200156/dtcat/omap2plus_defconfig/uImage-dtb.omap3-beagle
>
> and observing that this file size is the sum of the DTB file size (63180
> bytes):
>
> http://www.pwsan.com/omap/testlogs/test_v4.1-rc1/20150426200156/dtbs/omap3-beagle.dtb
>
> and the zImage file size (3431936 bytes):
>
> http://www.pwsan.com/omap/testlogs/test_v4.1-rc1/20150426200156/build_z/omap2plus_defconfig/zImage
>
> and the 64 byte uImage header.
>
>
> The only board that I suspect may be using an old DTB is the 4460
> VAR-SOM-OM.
>
>
> - Paul
>
Any news on this? As noted previously, I am not able to reproduce the
issue you are seeing currently, can you give DEBUG_LL a shot?
-Tero
^ permalink raw reply [flat|nested] 120+ messages in thread
* Re: [PATCHv2 01/27] ARM: OMAP2+: clock: export driver API to setup/get clock features
2015-05-11 8:54 ` Tero Kristo
@ 2015-05-20 1:19 ` Stephen Boyd
-1 siblings, 0 replies; 120+ messages in thread
From: Stephen Boyd @ 2015-05-20 1:19 UTC (permalink / raw)
To: Tero Kristo
Cc: mturquette, tony, linux-omap, linux-clk, paul, linux-arm-kernel
On 05/11, Tero Kristo wrote:
> +
> +/**
> + * ti_clk_get_features - get clock driver features flags
> + *
> + * Get TI clock driver features description. Returns a pointer
> + * to the current feature setup.
> + */
> +struct ti_clk_features *ti_clk_get_features(void)
Should this return a const pointer?
> +{
> + return &ti_clk_features;
> +}
> #endif
--
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project
^ permalink raw reply [flat|nested] 120+ messages in thread
* [PATCHv2 01/27] ARM: OMAP2+: clock: export driver API to setup/get clock features
@ 2015-05-20 1:19 ` Stephen Boyd
0 siblings, 0 replies; 120+ messages in thread
From: Stephen Boyd @ 2015-05-20 1:19 UTC (permalink / raw)
To: linux-arm-kernel
On 05/11, Tero Kristo wrote:
> +
> +/**
> + * ti_clk_get_features - get clock driver features flags
> + *
> + * Get TI clock driver features description. Returns a pointer
> + * to the current feature setup.
> + */
> +struct ti_clk_features *ti_clk_get_features(void)
Should this return a const pointer?
> +{
> + return &ti_clk_features;
> +}
> #endif
--
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project
^ permalink raw reply [flat|nested] 120+ messages in thread
* Re: [PATCHv2 02/27] clk: ti: move generic OMAP DPLL implementation under drivers/clk
2015-05-11 8:54 ` Tero Kristo
@ 2015-05-20 1:20 ` Stephen Boyd
-1 siblings, 0 replies; 120+ messages in thread
From: Stephen Boyd @ 2015-05-20 1:20 UTC (permalink / raw)
To: Tero Kristo
Cc: mturquette, tony, linux-omap, linux-clk, paul, linux-arm-kernel
On 05/11, Tero Kristo wrote:
> With the legacy clock data now gone, we can start moving OMAP clock
> type implementations under clock driver. Start this with moving the
> generic OMAP DPLL clock type under TI clock driver.
>
> Signed-off-by: Tero Kristo <t-kristo@ti.com>
> ---
How much of the code is the same from the original copy? Can you
generate these patches with -M -C so that we can see?
> arch/arm/mach-omap2/Makefile | 2 +-
> arch/arm/mach-omap2/clkt_dpll.c | 370 ---------------------------------------
> drivers/clk/ti/Makefile | 3 +-
> drivers/clk/ti/clkt_dpll.c | 369 ++++++++++++++++++++++++++++++++++++++
> drivers/clk/ti/clock.h | 2 +
> include/linux/clk/ti.h | 1 -
> 6 files changed, 374 insertions(+), 373 deletions(-)
> delete mode 100644 arch/arm/mach-omap2/clkt_dpll.c
> create mode 100644 drivers/clk/ti/clkt_dpll.c
--
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project
^ permalink raw reply [flat|nested] 120+ messages in thread
* [PATCHv2 02/27] clk: ti: move generic OMAP DPLL implementation under drivers/clk
@ 2015-05-20 1:20 ` Stephen Boyd
0 siblings, 0 replies; 120+ messages in thread
From: Stephen Boyd @ 2015-05-20 1:20 UTC (permalink / raw)
To: linux-arm-kernel
On 05/11, Tero Kristo wrote:
> With the legacy clock data now gone, we can start moving OMAP clock
> type implementations under clock driver. Start this with moving the
> generic OMAP DPLL clock type under TI clock driver.
>
> Signed-off-by: Tero Kristo <t-kristo@ti.com>
> ---
How much of the code is the same from the original copy? Can you
generate these patches with -M -C so that we can see?
> arch/arm/mach-omap2/Makefile | 2 +-
> arch/arm/mach-omap2/clkt_dpll.c | 370 ---------------------------------------
> drivers/clk/ti/Makefile | 3 +-
> drivers/clk/ti/clkt_dpll.c | 369 ++++++++++++++++++++++++++++++++++++++
> drivers/clk/ti/clock.h | 2 +
> include/linux/clk/ti.h | 1 -
> 6 files changed, 374 insertions(+), 373 deletions(-)
> delete mode 100644 arch/arm/mach-omap2/clkt_dpll.c
> create mode 100644 drivers/clk/ti/clkt_dpll.c
--
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project
^ permalink raw reply [flat|nested] 120+ messages in thread
* Re: [PATCHv2 02/27] clk: ti: move generic OMAP DPLL implementation under drivers/clk
2015-05-20 1:20 ` Stephen Boyd
(?)
@ 2015-05-20 17:43 ` Tero Kristo
-1 siblings, 0 replies; 120+ messages in thread
From: Tero Kristo @ 2015-05-20 17:43 UTC (permalink / raw)
To: Stephen Boyd
Cc: mturquette, tony, linux-omap, linux-clk, paul, linux-arm-kernel
On 05/20/2015 04:20 AM, Stephen Boyd wrote:
> On 05/11, Tero Kristo wrote:
>> With the legacy clock data now gone, we can start moving OMAP clock
>> type implementations under clock driver. Start this with moving the
>> generic OMAP DPLL clock type under TI clock driver.
>>
>> Signed-off-by: Tero Kristo <t-kristo@ti.com>
>> ---
>
> How much of the code is the same from the original copy? Can you
> generate these patches with -M -C so that we can see?
Looks like for the move patches the range is from 85%...95% exact copy.
Shall I repost the patches in this format? Good hint for the -M -C btw,
I wonder why those are not default options for git-format-patch.
-Tero
>
>> arch/arm/mach-omap2/Makefile | 2 +-
>> arch/arm/mach-omap2/clkt_dpll.c | 370 ---------------------------------------
>> drivers/clk/ti/Makefile | 3 +-
>> drivers/clk/ti/clkt_dpll.c | 369 ++++++++++++++++++++++++++++++++++++++
>> drivers/clk/ti/clock.h | 2 +
>> include/linux/clk/ti.h | 1 -
>> 6 files changed, 374 insertions(+), 373 deletions(-)
>> delete mode 100644 arch/arm/mach-omap2/clkt_dpll.c
>> create mode 100644 drivers/clk/ti/clkt_dpll.c
>
^ permalink raw reply [flat|nested] 120+ messages in thread
* Re: [PATCHv2 02/27] clk: ti: move generic OMAP DPLL implementation under drivers/clk
@ 2015-05-20 17:43 ` Tero Kristo
0 siblings, 0 replies; 120+ messages in thread
From: Tero Kristo @ 2015-05-20 17:43 UTC (permalink / raw)
To: Stephen Boyd
Cc: mturquette, tony, linux-omap, linux-clk, paul, linux-arm-kernel
On 05/20/2015 04:20 AM, Stephen Boyd wrote:
> On 05/11, Tero Kristo wrote:
>> With the legacy clock data now gone, we can start moving OMAP clock
>> type implementations under clock driver. Start this with moving the
>> generic OMAP DPLL clock type under TI clock driver.
>>
>> Signed-off-by: Tero Kristo <t-kristo@ti.com>
>> ---
>
> How much of the code is the same from the original copy? Can you
> generate these patches with -M -C so that we can see?
Looks like for the move patches the range is from 85%...95% exact copy.
Shall I repost the patches in this format? Good hint for the -M -C btw,
I wonder why those are not default options for git-format-patch.
-Tero
>
>> arch/arm/mach-omap2/Makefile | 2 +-
>> arch/arm/mach-omap2/clkt_dpll.c | 370 ---------------------------------------
>> drivers/clk/ti/Makefile | 3 +-
>> drivers/clk/ti/clkt_dpll.c | 369 ++++++++++++++++++++++++++++++++++++++
>> drivers/clk/ti/clock.h | 2 +
>> include/linux/clk/ti.h | 1 -
>> 6 files changed, 374 insertions(+), 373 deletions(-)
>> delete mode 100644 arch/arm/mach-omap2/clkt_dpll.c
>> create mode 100644 drivers/clk/ti/clkt_dpll.c
>
^ permalink raw reply [flat|nested] 120+ messages in thread
* [PATCHv2 02/27] clk: ti: move generic OMAP DPLL implementation under drivers/clk
@ 2015-05-20 17:43 ` Tero Kristo
0 siblings, 0 replies; 120+ messages in thread
From: Tero Kristo @ 2015-05-20 17:43 UTC (permalink / raw)
To: linux-arm-kernel
On 05/20/2015 04:20 AM, Stephen Boyd wrote:
> On 05/11, Tero Kristo wrote:
>> With the legacy clock data now gone, we can start moving OMAP clock
>> type implementations under clock driver. Start this with moving the
>> generic OMAP DPLL clock type under TI clock driver.
>>
>> Signed-off-by: Tero Kristo <t-kristo@ti.com>
>> ---
>
> How much of the code is the same from the original copy? Can you
> generate these patches with -M -C so that we can see?
Looks like for the move patches the range is from 85%...95% exact copy.
Shall I repost the patches in this format? Good hint for the -M -C btw,
I wonder why those are not default options for git-format-patch.
-Tero
>
>> arch/arm/mach-omap2/Makefile | 2 +-
>> arch/arm/mach-omap2/clkt_dpll.c | 370 ---------------------------------------
>> drivers/clk/ti/Makefile | 3 +-
>> drivers/clk/ti/clkt_dpll.c | 369 ++++++++++++++++++++++++++++++++++++++
>> drivers/clk/ti/clock.h | 2 +
>> include/linux/clk/ti.h | 1 -
>> 6 files changed, 374 insertions(+), 373 deletions(-)
>> delete mode 100644 arch/arm/mach-omap2/clkt_dpll.c
>> create mode 100644 drivers/clk/ti/clkt_dpll.c
>
^ permalink raw reply [flat|nested] 120+ messages in thread
* Re: [PATCHv2 02/27] clk: ti: move generic OMAP DPLL implementation under drivers/clk
2015-05-20 17:43 ` Tero Kristo
@ 2015-05-20 17:46 ` Tony Lindgren
-1 siblings, 0 replies; 120+ messages in thread
From: Tony Lindgren @ 2015-05-20 17:46 UTC (permalink / raw)
To: Tero Kristo
Cc: Stephen Boyd, mturquette, linux-omap, linux-clk, paul, linux-arm-kernel
* Tero Kristo <t-kristo@ti.com> [150520 10:45]:
> On 05/20/2015 04:20 AM, Stephen Boyd wrote:
> >On 05/11, Tero Kristo wrote:
> >>With the legacy clock data now gone, we can start moving OMAP clock
> >>type implementations under clock driver. Start this with moving the
> >>generic OMAP DPLL clock type under TI clock driver.
> >>
> >>Signed-off-by: Tero Kristo <t-kristo@ti.com>
> >>---
> >
> >How much of the code is the same from the original copy? Can you
> >generate these patches with -M -C so that we can see?
>
> Looks like for the move patches the range is from 85%...95% exact copy.
> Shall I repost the patches in this format? Good hint for the -M -C btw, I
> wonder why those are not default options for git-format-patch.
While tweaking your scripts.. Can you also check why the cover
letter for your patches is missing the whole series diffstat?
The diffstat is automatically created with:
$ git format-patch --cover-letter -o /tmp/outgoing v4.1-rc1..
Regards,
Tony
^ permalink raw reply [flat|nested] 120+ messages in thread
* [PATCHv2 02/27] clk: ti: move generic OMAP DPLL implementation under drivers/clk
@ 2015-05-20 17:46 ` Tony Lindgren
0 siblings, 0 replies; 120+ messages in thread
From: Tony Lindgren @ 2015-05-20 17:46 UTC (permalink / raw)
To: linux-arm-kernel
* Tero Kristo <t-kristo@ti.com> [150520 10:45]:
> On 05/20/2015 04:20 AM, Stephen Boyd wrote:
> >On 05/11, Tero Kristo wrote:
> >>With the legacy clock data now gone, we can start moving OMAP clock
> >>type implementations under clock driver. Start this with moving the
> >>generic OMAP DPLL clock type under TI clock driver.
> >>
> >>Signed-off-by: Tero Kristo <t-kristo@ti.com>
> >>---
> >
> >How much of the code is the same from the original copy? Can you
> >generate these patches with -M -C so that we can see?
>
> Looks like for the move patches the range is from 85%...95% exact copy.
> Shall I repost the patches in this format? Good hint for the -M -C btw, I
> wonder why those are not default options for git-format-patch.
While tweaking your scripts.. Can you also check why the cover
letter for your patches is missing the whole series diffstat?
The diffstat is automatically created with:
$ git format-patch --cover-letter -o /tmp/outgoing v4.1-rc1..
Regards,
Tony
^ permalink raw reply [flat|nested] 120+ messages in thread
* Re: [PATCHv2 02/27] clk: ti: move generic OMAP DPLL implementation under drivers/clk
2015-05-20 17:43 ` Tero Kristo
@ 2015-05-20 18:23 ` Stephen Boyd
-1 siblings, 0 replies; 120+ messages in thread
From: Stephen Boyd @ 2015-05-20 18:23 UTC (permalink / raw)
To: Tero Kristo
Cc: mturquette, tony, linux-omap, linux-clk, paul, linux-arm-kernel
On 05/20, Tero Kristo wrote:
> On 05/20/2015 04:20 AM, Stephen Boyd wrote:
> >On 05/11, Tero Kristo wrote:
> >>With the legacy clock data now gone, we can start moving OMAP clock
> >>type implementations under clock driver. Start this with moving the
> >>generic OMAP DPLL clock type under TI clock driver.
> >>
> >>Signed-off-by: Tero Kristo <t-kristo@ti.com>
> >>---
> >
> >How much of the code is the same from the original copy? Can you
> >generate these patches with -M -C so that we can see?
>
> Looks like for the move patches the range is from 85%...95% exact
> copy. Shall I repost the patches in this format?
Sure, a resend would be nice to actually see what changed. If
that's too much mail, maybe you can share the diffstat for the
whole series with -M -C so we can see what's moved instead.
> Good hint for the
> -M -C btw, I wonder why those are not default options for
> git-format-patch.
>
I think it isn't the default because 'patch' the program didn't
always support the diff format that git generates with the -M and
-C options. FWIW, I have
[diff]
renames = copy
in my .gitconfig for this purpose.
--
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project
^ permalink raw reply [flat|nested] 120+ messages in thread
* [PATCHv2 02/27] clk: ti: move generic OMAP DPLL implementation under drivers/clk
@ 2015-05-20 18:23 ` Stephen Boyd
0 siblings, 0 replies; 120+ messages in thread
From: Stephen Boyd @ 2015-05-20 18:23 UTC (permalink / raw)
To: linux-arm-kernel
On 05/20, Tero Kristo wrote:
> On 05/20/2015 04:20 AM, Stephen Boyd wrote:
> >On 05/11, Tero Kristo wrote:
> >>With the legacy clock data now gone, we can start moving OMAP clock
> >>type implementations under clock driver. Start this with moving the
> >>generic OMAP DPLL clock type under TI clock driver.
> >>
> >>Signed-off-by: Tero Kristo <t-kristo@ti.com>
> >>---
> >
> >How much of the code is the same from the original copy? Can you
> >generate these patches with -M -C so that we can see?
>
> Looks like for the move patches the range is from 85%...95% exact
> copy. Shall I repost the patches in this format?
Sure, a resend would be nice to actually see what changed. If
that's too much mail, maybe you can share the diffstat for the
whole series with -M -C so we can see what's moved instead.
> Good hint for the
> -M -C btw, I wonder why those are not default options for
> git-format-patch.
>
I think it isn't the default because 'patch' the program didn't
always support the diff format that git generates with the -M and
-C options. FWIW, I have
[diff]
renames = copy
in my .gitconfig for this purpose.
--
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project
^ permalink raw reply [flat|nested] 120+ messages in thread
* Re: [PATCHv2 00/27] ARM: OMAP2+: clock code migration to drivers/clk/ti
2015-05-19 19:23 ` Tero Kristo
@ 2015-05-20 22:40 ` Paul Walmsley
-1 siblings, 0 replies; 120+ messages in thread
From: Paul Walmsley @ 2015-05-20 22:40 UTC (permalink / raw)
To: Tero Kristo
Cc: mturquette, tony, linux-omap, linux-clk, sboyd, linux-arm-kernel
On Tue, 19 May 2015, Tero Kristo wrote:
> Any news on this? As noted previously, I am not able to reproduce the issue
> you are seeing currently, can you give DEBUG_LL a shot?
Yeah I just bisected it, it was caused by this:
commit cc4a5fe972ad7834e8662b49b3a5fdb597e9e15e
Author: Felipe Balbi <balbi@ti.com>
Date: Fri Jan 30 11:18:56 2015 -0600
arm: config: omap2plus_defconfig: switch over to LZMA compression
LZMA compression makes about 33% smaller zImage
with just a slight extra decompression time.
Before this patch, zImage built with o2+_dc
is 4.5MiB and after it's about 3.3MiB.
Suggested-by: David Cohen <david.a.cohen@linux.intel.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
and the timeouts on the testbed being set to fail if a kernel takes longer
than five seconds to start. Seems that the part about a "slight extra
decompression time" probably only applies to relatively recent chips.
- Paul
^ permalink raw reply [flat|nested] 120+ messages in thread
* [PATCHv2 00/27] ARM: OMAP2+: clock code migration to drivers/clk/ti
@ 2015-05-20 22:40 ` Paul Walmsley
0 siblings, 0 replies; 120+ messages in thread
From: Paul Walmsley @ 2015-05-20 22:40 UTC (permalink / raw)
To: linux-arm-kernel
On Tue, 19 May 2015, Tero Kristo wrote:
> Any news on this? As noted previously, I am not able to reproduce the issue
> you are seeing currently, can you give DEBUG_LL a shot?
Yeah I just bisected it, it was caused by this:
commit cc4a5fe972ad7834e8662b49b3a5fdb597e9e15e
Author: Felipe Balbi <balbi@ti.com>
Date: Fri Jan 30 11:18:56 2015 -0600
arm: config: omap2plus_defconfig: switch over to LZMA compression
LZMA compression makes about 33% smaller zImage
with just a slight extra decompression time.
Before this patch, zImage built with o2+_dc
is 4.5MiB and after it's about 3.3MiB.
Suggested-by: David Cohen <david.a.cohen@linux.intel.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
and the timeouts on the testbed being set to fail if a kernel takes longer
than five seconds to start. Seems that the part about a "slight extra
decompression time" probably only applies to relatively recent chips.
- Paul
^ permalink raw reply [flat|nested] 120+ messages in thread
* Re: [PATCHv2 00/27] ARM: OMAP2+: clock code migration to drivers/clk/ti
2015-05-20 22:40 ` Paul Walmsley
(?)
@ 2015-05-21 6:38 ` Tero Kristo
-1 siblings, 0 replies; 120+ messages in thread
From: Tero Kristo @ 2015-05-21 6:38 UTC (permalink / raw)
To: Paul Walmsley
Cc: mturquette, tony, linux-omap, linux-clk, sboyd, linux-arm-kernel
On 05/21/2015 01:40 AM, Paul Walmsley wrote:
> On Tue, 19 May 2015, Tero Kristo wrote:
>
>> Any news on this? As noted previously, I am not able to reproduce the issue
>> you are seeing currently, can you give DEBUG_LL a shot?
>
> Yeah I just bisected it, it was caused by this:
>
> commit cc4a5fe972ad7834e8662b49b3a5fdb597e9e15e
> Author: Felipe Balbi <balbi@ti.com>
> Date: Fri Jan 30 11:18:56 2015 -0600
>
> arm: config: omap2plus_defconfig: switch over to LZMA compression
>
> LZMA compression makes about 33% smaller zImage
> with just a slight extra decompression time.
>
> Before this patch, zImage built with o2+_dc
> is 4.5MiB and after it's about 3.3MiB.
>
> Suggested-by: David Cohen <david.a.cohen@linux.intel.com>
> Signed-off-by: Felipe Balbi <balbi@ti.com>
> Signed-off-by: Tony Lindgren <tony@atomide.com>
>
>
> and the timeouts on the testbed being set to fail if a kernel takes longer
> than five seconds to start. Seems that the part about a "slight extra
> decompression time" probably only applies to relatively recent chips.
>
>
> - Paul
>
Oh, so this explains why I was thinking it took very long time to boot
the recent kernels also. The boot lag is clearly noticeable without any
measurement. I wonder if we should probably revert this patch.
-Tero
^ permalink raw reply [flat|nested] 120+ messages in thread
* Re: [PATCHv2 00/27] ARM: OMAP2+: clock code migration to drivers/clk/ti
@ 2015-05-21 6:38 ` Tero Kristo
0 siblings, 0 replies; 120+ messages in thread
From: Tero Kristo @ 2015-05-21 6:38 UTC (permalink / raw)
To: Paul Walmsley
Cc: mturquette, tony, linux-omap, linux-clk, sboyd, linux-arm-kernel
On 05/21/2015 01:40 AM, Paul Walmsley wrote:
> On Tue, 19 May 2015, Tero Kristo wrote:
>
>> Any news on this? As noted previously, I am not able to reproduce the issue
>> you are seeing currently, can you give DEBUG_LL a shot?
>
> Yeah I just bisected it, it was caused by this:
>
> commit cc4a5fe972ad7834e8662b49b3a5fdb597e9e15e
> Author: Felipe Balbi <balbi@ti.com>
> Date: Fri Jan 30 11:18:56 2015 -0600
>
> arm: config: omap2plus_defconfig: switch over to LZMA compression
>
> LZMA compression makes about 33% smaller zImage
> with just a slight extra decompression time.
>
> Before this patch, zImage built with o2+_dc
> is 4.5MiB and after it's about 3.3MiB.
>
> Suggested-by: David Cohen <david.a.cohen@linux.intel.com>
> Signed-off-by: Felipe Balbi <balbi@ti.com>
> Signed-off-by: Tony Lindgren <tony@atomide.com>
>
>
> and the timeouts on the testbed being set to fail if a kernel takes longer
> than five seconds to start. Seems that the part about a "slight extra
> decompression time" probably only applies to relatively recent chips.
>
>
> - Paul
>
Oh, so this explains why I was thinking it took very long time to boot
the recent kernels also. The boot lag is clearly noticeable without any
measurement. I wonder if we should probably revert this patch.
-Tero
^ permalink raw reply [flat|nested] 120+ messages in thread
* [PATCHv2 00/27] ARM: OMAP2+: clock code migration to drivers/clk/ti
@ 2015-05-21 6:38 ` Tero Kristo
0 siblings, 0 replies; 120+ messages in thread
From: Tero Kristo @ 2015-05-21 6:38 UTC (permalink / raw)
To: linux-arm-kernel
On 05/21/2015 01:40 AM, Paul Walmsley wrote:
> On Tue, 19 May 2015, Tero Kristo wrote:
>
>> Any news on this? As noted previously, I am not able to reproduce the issue
>> you are seeing currently, can you give DEBUG_LL a shot?
>
> Yeah I just bisected it, it was caused by this:
>
> commit cc4a5fe972ad7834e8662b49b3a5fdb597e9e15e
> Author: Felipe Balbi <balbi@ti.com>
> Date: Fri Jan 30 11:18:56 2015 -0600
>
> arm: config: omap2plus_defconfig: switch over to LZMA compression
>
> LZMA compression makes about 33% smaller zImage
> with just a slight extra decompression time.
>
> Before this patch, zImage built with o2+_dc
> is 4.5MiB and after it's about 3.3MiB.
>
> Suggested-by: David Cohen <david.a.cohen@linux.intel.com>
> Signed-off-by: Felipe Balbi <balbi@ti.com>
> Signed-off-by: Tony Lindgren <tony@atomide.com>
>
>
> and the timeouts on the testbed being set to fail if a kernel takes longer
> than five seconds to start. Seems that the part about a "slight extra
> decompression time" probably only applies to relatively recent chips.
>
>
> - Paul
>
Oh, so this explains why I was thinking it took very long time to boot
the recent kernels also. The boot lag is clearly noticeable without any
measurement. I wonder if we should probably revert this patch.
-Tero
^ permalink raw reply [flat|nested] 120+ messages in thread
* Re: [PATCHv2 00/27] ARM: OMAP2+: clock code migration to drivers/clk/ti
2015-05-21 6:38 ` Tero Kristo
(?)
@ 2015-05-21 7:01 ` Nishanth Menon
-1 siblings, 0 replies; 120+ messages in thread
From: Nishanth Menon @ 2015-05-21 7:01 UTC (permalink / raw)
To: Tero Kristo, Paul Walmsley
Cc: mturquette, tony, linux-omap, linux-clk, sboyd, linux-arm-kernel
On 05/21/2015 01:38 AM, Tero Kristo wrote:
> On 05/21/2015 01:40 AM, Paul Walmsley wrote:
>> On Tue, 19 May 2015, Tero Kristo wrote:
>>
>>> Any news on this? As noted previously, I am not able to reproduce the
>>> issue
>>> you are seeing currently, can you give DEBUG_LL a shot?
>>
>> Yeah I just bisected it, it was caused by this:
>>
>> commit cc4a5fe972ad7834e8662b49b3a5fdb597e9e15e
>> Author: Felipe Balbi <balbi@ti.com>
>> Date: Fri Jan 30 11:18:56 2015 -0600
>>
>> arm: config: omap2plus_defconfig: switch over to LZMA compression
>>
>> LZMA compression makes about 33% smaller zImage
>> with just a slight extra decompression time.
>>
>> Before this patch, zImage built with o2+_dc
>> is 4.5MiB and after it's about 3.3MiB.
>>
>> Suggested-by: David Cohen <david.a.cohen@linux.intel.com>
>> Signed-off-by: Felipe Balbi <balbi@ti.com>
>> Signed-off-by: Tony Lindgren <tony@atomide.com>
>>
>>
>> and the timeouts on the testbed being set to fail if a kernel takes
>> longer
>> than five seconds to start. Seems that the part about a "slight extra
>> decompression time" probably only applies to relatively recent chips.
>>
>>
>> - Paul
>>
>
> Oh, so this explains why I was thinking it took very long time to boot
> the recent kernels also. The boot lag is clearly noticeable without any
> measurement. I wonder if we should probably revert this patch.
we already have issues with zImage size bloating up and running headlong
into dtb - esp on platforms like N900. Felipe spend quiet some time
getting things into a manageable size here -> loosing 33% sounds like
bad idea to me :(
--
Regards,
Nishanth Menon
^ permalink raw reply [flat|nested] 120+ messages in thread
* Re: [PATCHv2 00/27] ARM: OMAP2+: clock code migration to drivers/clk/ti
@ 2015-05-21 7:01 ` Nishanth Menon
0 siblings, 0 replies; 120+ messages in thread
From: Nishanth Menon @ 2015-05-21 7:01 UTC (permalink / raw)
To: Tero Kristo, Paul Walmsley
Cc: mturquette, tony, linux-omap, linux-clk, sboyd, linux-arm-kernel
On 05/21/2015 01:38 AM, Tero Kristo wrote:
> On 05/21/2015 01:40 AM, Paul Walmsley wrote:
>> On Tue, 19 May 2015, Tero Kristo wrote:
>>
>>> Any news on this? As noted previously, I am not able to reproduce the
>>> issue
>>> you are seeing currently, can you give DEBUG_LL a shot?
>>
>> Yeah I just bisected it, it was caused by this:
>>
>> commit cc4a5fe972ad7834e8662b49b3a5fdb597e9e15e
>> Author: Felipe Balbi <balbi@ti.com>
>> Date: Fri Jan 30 11:18:56 2015 -0600
>>
>> arm: config: omap2plus_defconfig: switch over to LZMA compression
>>
>> LZMA compression makes about 33% smaller zImage
>> with just a slight extra decompression time.
>>
>> Before this patch, zImage built with o2+_dc
>> is 4.5MiB and after it's about 3.3MiB.
>>
>> Suggested-by: David Cohen <david.a.cohen@linux.intel.com>
>> Signed-off-by: Felipe Balbi <balbi@ti.com>
>> Signed-off-by: Tony Lindgren <tony@atomide.com>
>>
>>
>> and the timeouts on the testbed being set to fail if a kernel takes
>> longer
>> than five seconds to start. Seems that the part about a "slight extra
>> decompression time" probably only applies to relatively recent chips.
>>
>>
>> - Paul
>>
>
> Oh, so this explains why I was thinking it took very long time to boot
> the recent kernels also. The boot lag is clearly noticeable without any
> measurement. I wonder if we should probably revert this patch.
we already have issues with zImage size bloating up and running headlong
into dtb - esp on platforms like N900. Felipe spend quiet some time
getting things into a manageable size here -> loosing 33% sounds like
bad idea to me :(
--
Regards,
Nishanth Menon
^ permalink raw reply [flat|nested] 120+ messages in thread
* [PATCHv2 00/27] ARM: OMAP2+: clock code migration to drivers/clk/ti
@ 2015-05-21 7:01 ` Nishanth Menon
0 siblings, 0 replies; 120+ messages in thread
From: Nishanth Menon @ 2015-05-21 7:01 UTC (permalink / raw)
To: linux-arm-kernel
On 05/21/2015 01:38 AM, Tero Kristo wrote:
> On 05/21/2015 01:40 AM, Paul Walmsley wrote:
>> On Tue, 19 May 2015, Tero Kristo wrote:
>>
>>> Any news on this? As noted previously, I am not able to reproduce the
>>> issue
>>> you are seeing currently, can you give DEBUG_LL a shot?
>>
>> Yeah I just bisected it, it was caused by this:
>>
>> commit cc4a5fe972ad7834e8662b49b3a5fdb597e9e15e
>> Author: Felipe Balbi <balbi@ti.com>
>> Date: Fri Jan 30 11:18:56 2015 -0600
>>
>> arm: config: omap2plus_defconfig: switch over to LZMA compression
>>
>> LZMA compression makes about 33% smaller zImage
>> with just a slight extra decompression time.
>>
>> Before this patch, zImage built with o2+_dc
>> is 4.5MiB and after it's about 3.3MiB.
>>
>> Suggested-by: David Cohen <david.a.cohen@linux.intel.com>
>> Signed-off-by: Felipe Balbi <balbi@ti.com>
>> Signed-off-by: Tony Lindgren <tony@atomide.com>
>>
>>
>> and the timeouts on the testbed being set to fail if a kernel takes
>> longer
>> than five seconds to start. Seems that the part about a "slight extra
>> decompression time" probably only applies to relatively recent chips.
>>
>>
>> - Paul
>>
>
> Oh, so this explains why I was thinking it took very long time to boot
> the recent kernels also. The boot lag is clearly noticeable without any
> measurement. I wonder if we should probably revert this patch.
we already have issues with zImage size bloating up and running headlong
into dtb - esp on platforms like N900. Felipe spend quiet some time
getting things into a manageable size here -> loosing 33% sounds like
bad idea to me :(
--
Regards,
Nishanth Menon
^ permalink raw reply [flat|nested] 120+ messages in thread
* Re: [PATCHv2 00/27] ARM: OMAP2+: clock code migration to drivers/clk/ti
2015-05-21 7:01 ` Nishanth Menon
@ 2015-05-21 18:38 ` Tony Lindgren
-1 siblings, 0 replies; 120+ messages in thread
From: Tony Lindgren @ 2015-05-21 18:38 UTC (permalink / raw)
To: Nishanth Menon
Cc: Tero Kristo, Paul Walmsley, mturquette, linux-omap, linux-clk,
sboyd, linux-arm-kernel
* Nishanth Menon <nm@ti.com> [150521 00:03]:
> On 05/21/2015 01:38 AM, Tero Kristo wrote:
> > On 05/21/2015 01:40 AM, Paul Walmsley wrote:
> >> On Tue, 19 May 2015, Tero Kristo wrote:
> >>
> >>> Any news on this? As noted previously, I am not able to reproduce the
> >>> issue
> >>> you are seeing currently, can you give DEBUG_LL a shot?
> >>
> >> Yeah I just bisected it, it was caused by this:
> >>
> >> commit cc4a5fe972ad7834e8662b49b3a5fdb597e9e15e
> >> Author: Felipe Balbi <balbi@ti.com>
> >> Date: Fri Jan 30 11:18:56 2015 -0600
> >>
> >> arm: config: omap2plus_defconfig: switch over to LZMA compression
> >>
> >> LZMA compression makes about 33% smaller zImage
> >> with just a slight extra decompression time.
> >>
> >> Before this patch, zImage built with o2+_dc
> >> is 4.5MiB and after it's about 3.3MiB.
> >>
> >> Suggested-by: David Cohen <david.a.cohen@linux.intel.com>
> >> Signed-off-by: Felipe Balbi <balbi@ti.com>
> >> Signed-off-by: Tony Lindgren <tony@atomide.com>
> >>
> >>
> >> and the timeouts on the testbed being set to fail if a kernel takes
> >> longer
> >> than five seconds to start. Seems that the part about a "slight extra
> >> decompression time" probably only applies to relatively recent chips.
> >>
> >>
> >> - Paul
> >>
> >
> > Oh, so this explains why I was thinking it took very long time to boot
> > the recent kernels also. The boot lag is clearly noticeable without any
> > measurement. I wonder if we should probably revert this patch.
>
> we already have issues with zImage size bloating up and running headlong
> into dtb - esp on platforms like N900. Felipe spend quiet some time
> getting things into a manageable size here -> loosing 33% sounds like
> bad idea to me :(
If it affects people using the slower 34xx systems we should probably
revert it though. Or make the uncompress somehow faster :)
Regards,
Tony
^ permalink raw reply [flat|nested] 120+ messages in thread
* [PATCHv2 00/27] ARM: OMAP2+: clock code migration to drivers/clk/ti
@ 2015-05-21 18:38 ` Tony Lindgren
0 siblings, 0 replies; 120+ messages in thread
From: Tony Lindgren @ 2015-05-21 18:38 UTC (permalink / raw)
To: linux-arm-kernel
* Nishanth Menon <nm@ti.com> [150521 00:03]:
> On 05/21/2015 01:38 AM, Tero Kristo wrote:
> > On 05/21/2015 01:40 AM, Paul Walmsley wrote:
> >> On Tue, 19 May 2015, Tero Kristo wrote:
> >>
> >>> Any news on this? As noted previously, I am not able to reproduce the
> >>> issue
> >>> you are seeing currently, can you give DEBUG_LL a shot?
> >>
> >> Yeah I just bisected it, it was caused by this:
> >>
> >> commit cc4a5fe972ad7834e8662b49b3a5fdb597e9e15e
> >> Author: Felipe Balbi <balbi@ti.com>
> >> Date: Fri Jan 30 11:18:56 2015 -0600
> >>
> >> arm: config: omap2plus_defconfig: switch over to LZMA compression
> >>
> >> LZMA compression makes about 33% smaller zImage
> >> with just a slight extra decompression time.
> >>
> >> Before this patch, zImage built with o2+_dc
> >> is 4.5MiB and after it's about 3.3MiB.
> >>
> >> Suggested-by: David Cohen <david.a.cohen@linux.intel.com>
> >> Signed-off-by: Felipe Balbi <balbi@ti.com>
> >> Signed-off-by: Tony Lindgren <tony@atomide.com>
> >>
> >>
> >> and the timeouts on the testbed being set to fail if a kernel takes
> >> longer
> >> than five seconds to start. Seems that the part about a "slight extra
> >> decompression time" probably only applies to relatively recent chips.
> >>
> >>
> >> - Paul
> >>
> >
> > Oh, so this explains why I was thinking it took very long time to boot
> > the recent kernels also. The boot lag is clearly noticeable without any
> > measurement. I wonder if we should probably revert this patch.
>
> we already have issues with zImage size bloating up and running headlong
> into dtb - esp on platforms like N900. Felipe spend quiet some time
> getting things into a manageable size here -> loosing 33% sounds like
> bad idea to me :(
If it affects people using the slower 34xx systems we should probably
revert it though. Or make the uncompress somehow faster :)
Regards,
Tony
^ permalink raw reply [flat|nested] 120+ messages in thread
end of thread, other threads:[~2015-05-21 18:38 UTC | newest]
Thread overview: 120+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2015-05-11 8:54 [PATCHv2 00/27] ARM: OMAP2+: clock code migration to drivers/clk/ti Tero Kristo
2015-05-11 8:54 ` Tero Kristo
2015-05-11 8:54 ` Tero Kristo
2015-05-11 8:54 ` [PATCHv2 01/27] ARM: OMAP2+: clock: export driver API to setup/get clock features Tero Kristo
2015-05-11 8:54 ` Tero Kristo
2015-05-11 8:54 ` Tero Kristo
2015-05-20 1:19 ` Stephen Boyd
2015-05-20 1:19 ` Stephen Boyd
2015-05-11 8:54 ` [PATCHv2 02/27] clk: ti: move generic OMAP DPLL implementation under drivers/clk Tero Kristo
2015-05-11 8:54 ` Tero Kristo
2015-05-11 8:54 ` Tero Kristo
2015-05-20 1:20 ` Stephen Boyd
2015-05-20 1:20 ` Stephen Boyd
2015-05-20 17:43 ` Tero Kristo
2015-05-20 17:43 ` Tero Kristo
2015-05-20 17:43 ` Tero Kristo
2015-05-20 17:46 ` Tony Lindgren
2015-05-20 17:46 ` Tony Lindgren
2015-05-20 18:23 ` Stephen Boyd
2015-05-20 18:23 ` Stephen Boyd
2015-05-11 8:54 ` [PATCHv2 03/27] clk: ti: move OMAP4+ " Tero Kristo
2015-05-11 8:54 ` Tero Kristo
2015-05-11 8:54 ` Tero Kristo
2015-05-11 8:54 ` [PATCHv2 04/27] clk: ti: move interface clock " Tero Kristo
2015-05-11 8:54 ` Tero Kristo
2015-05-11 8:54 ` Tero Kristo
2015-05-11 8:54 ` [PATCHv2 05/27] ARM: OMAP3: dpll3-m2: get rid of obsolete clksel access Tero Kristo
2015-05-11 8:54 ` Tero Kristo
2015-05-11 8:54 ` Tero Kristo
2015-05-11 8:54 ` [PATCHv2 06/27] ARM: OMAP2+: clk: remove obsolete clksel support code Tero Kristo
2015-05-11 8:54 ` Tero Kristo
2015-05-11 8:54 ` Tero Kristo
2015-05-11 8:54 ` [PATCHv2 07/27] ARM: OMAP2+: clock: remove clock_common_data.c file Tero Kristo
2015-05-11 8:54 ` Tero Kristo
2015-05-11 8:54 ` Tero Kristo
2015-05-11 8:54 ` [PATCHv2 08/27] ARM: OMAP36xx: remove clock36xx.c/.h files Tero Kristo
2015-05-11 8:54 ` Tero Kristo
2015-05-11 8:54 ` Tero Kristo
2015-05-11 8:54 ` [PATCHv2 09/27] clk: ti: autoidle: move generic autoidle handling code to clock driver Tero Kristo
2015-05-11 8:54 ` Tero Kristo
2015-05-11 8:54 ` Tero Kristo
2015-05-11 8:54 ` [PATCHv2 10/27] clk: ti: move omap2_clk_enable_init_clocks under " Tero Kristo
2015-05-11 8:54 ` Tero Kristo
2015-05-11 8:54 ` Tero Kristo
2015-05-11 8:54 ` [PATCHv2 11/27] ARM: OMAP2+: clock: remove support for legacy mpurate command line param Tero Kristo
2015-05-11 8:54 ` Tero Kristo
2015-05-11 8:54 ` Tero Kristo
2015-05-11 8:54 ` [PATCHv2 12/27] ARM: OMAP2+: clock: add support for clkdm ops to the low level clk ops Tero Kristo
2015-05-11 8:54 ` Tero Kristo
2015-05-11 8:54 ` Tero Kristo
2015-05-11 8:54 ` [PATCHv2 13/27] ARM: OMAP2+: clock: add support for specific CM ops to ti_clk_ll_ops Tero Kristo
2015-05-11 8:54 ` Tero Kristo
2015-05-11 8:54 ` Tero Kristo
2015-05-11 8:54 ` [PATCHv2 14/27] clk: ti: dpll: move omap3 DPLL functionality to clock driver Tero Kristo
2015-05-11 8:54 ` Tero Kristo
2015-05-11 8:54 ` Tero Kristo
2015-05-11 8:54 ` [PATCHv2 15/27] ARM: OMAP3: clock: remove clock3xxx.c file Tero Kristo
2015-05-11 8:54 ` Tero Kristo
2015-05-11 8:54 ` Tero Kristo
2015-05-11 8:54 ` [PATCHv2 16/27] ARM: OMAP2+: clock: remove clkdm_control static boolean from code Tero Kristo
2015-05-11 8:54 ` Tero Kristo
2015-05-11 8:54 ` Tero Kristo
2015-05-11 8:54 ` [PATCHv2 17/27] clk: ti: dflt: move support for default gate clock to clock driver Tero Kristo
2015-05-11 8:54 ` Tero Kristo
2015-05-11 8:54 ` Tero Kristo
2015-05-11 8:54 ` [PATCHv2 18/27] clk: ti: omap2430: move clock support code under " Tero Kristo
2015-05-11 8:54 ` Tero Kristo
2015-05-11 8:54 ` Tero Kristo
2015-05-11 8:54 ` [PATCHv2 19/27] clk: ti: clkdm: move clkdm gate clock support code to " Tero Kristo
2015-05-11 8:54 ` Tero Kristo
2015-05-11 8:54 ` Tero Kristo
2015-05-11 8:54 ` [PATCHv2 20/27] clk: ti: omap34xx: move omap34xx clock type " Tero Kristo
2015-05-11 8:54 ` Tero Kristo
2015-05-11 8:54 ` Tero Kristo
2015-05-11 8:54 ` [PATCHv2 21/27] ARM: OMAP4: clock: remove clock44xx.h header Tero Kristo
2015-05-11 8:54 ` Tero Kristo
2015-05-11 8:54 ` Tero Kristo
2015-05-11 8:54 ` [PATCHv2 22/27] clk: ti: am3517: move remaining am3517 clock support code to clock driver Tero Kristo
2015-05-11 8:54 ` Tero Kristo
2015-05-11 8:54 ` Tero Kristo
2015-05-11 8:54 ` [PATCHv2 23/27] clk: ti: move some public definitions to private header Tero Kristo
2015-05-11 8:54 ` Tero Kristo
2015-05-11 8:54 ` Tero Kristo
2015-05-11 8:54 ` [PATCHv2 24/27] ARM: OMAP2+: clock: remove dead definitions from the clock header file Tero Kristo
2015-05-11 8:54 ` Tero Kristo
2015-05-11 8:54 ` Tero Kristo
2015-05-11 8:54 ` [PATCHv2 25/27] clk: ti: remove exported ll_ops struct, instead add an API for registration Tero Kristo
2015-05-11 8:54 ` Tero Kristo
2015-05-11 8:54 ` Tero Kristo
2015-05-11 8:54 ` [PATCHv2 26/27] ARM: OMAP2+: clock: remove legacy omap2_clk_readl/writel APIs Tero Kristo
2015-05-11 8:54 ` Tero Kristo
2015-05-11 8:54 ` Tero Kristo
2015-05-11 8:54 ` [PATCHv2 27/27] clk: ti: move low-level access and init code under clock driver Tero Kristo
2015-05-11 8:54 ` Tero Kristo
2015-05-11 8:54 ` Tero Kristo
2015-05-11 20:21 ` [PATCHv2 00/27] ARM: OMAP2+: clock code migration to drivers/clk/ti Paul Walmsley
2015-05-11 20:21 ` Paul Walmsley
2015-05-12 10:10 ` Tero Kristo
2015-05-12 10:10 ` Tero Kristo
2015-05-12 10:10 ` Tero Kristo
2015-05-12 20:58 ` Paul Walmsley
2015-05-12 20:58 ` Paul Walmsley
2015-05-13 6:46 ` Tero Kristo
2015-05-13 6:46 ` Tero Kristo
2015-05-13 6:46 ` Tero Kristo
2015-05-13 14:55 ` Paul Walmsley
2015-05-13 14:55 ` Paul Walmsley
2015-05-19 19:23 ` Tero Kristo
2015-05-19 19:23 ` Tero Kristo
2015-05-19 19:23 ` Tero Kristo
2015-05-20 22:40 ` Paul Walmsley
2015-05-20 22:40 ` Paul Walmsley
2015-05-21 6:38 ` Tero Kristo
2015-05-21 6:38 ` Tero Kristo
2015-05-21 6:38 ` Tero Kristo
2015-05-21 7:01 ` Nishanth Menon
2015-05-21 7:01 ` Nishanth Menon
2015-05-21 7:01 ` Nishanth Menon
2015-05-21 18:38 ` Tony Lindgren
2015-05-21 18:38 ` Tony Lindgren
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.