All of lore.kernel.org
 help / color / mirror / Atom feed
From: Stefano Stabellini <sstabellini@kernel.org>
To: Julien Grall <julien.grall@arm.com>
Cc: "Edgar E. Iglesias" <edgar.iglesias@xilinx.com>,
	sstabellini@kernel.org,
	Razvan Cojocaru <rcojocaru@bitdefender.com>,
	steve.capper@arm.com, proskurin@sec.in.tum.de,
	xen-devel@lists.xen.org, Dirk Behme <dirk.behme@de.bosch.com>,
	Tamas K Lengyel <tamas@tklengyel.com>,
	Shanker Donthineni <shankerd@codeaurora.org>,
	wei.chen@linaro.org
Subject: Re: [for-4.8][PATCH v2 00/23] xen/arm: Rework the P2M code to follow break-before-make sequence
Date: Tue, 27 Sep 2016 18:14:54 -0700 (PDT)	[thread overview]
Message-ID: <alpine.DEB.2.10.1609271814440.9519@sstabellini-ThinkPad-X260> (raw)
In-Reply-To: <1473938919-31976-1-git-send-email-julien.grall@arm.com>

On Thu, 15 Sep 2016, Julien Grall wrote:
> Hello all,
> 
> The ARM architecture mandates the use of a break-before-make sequence when
> changing translation entries if the page table is shared between multiple
> CPUs whenever a valid entry is replaced by another valid entry (see D4.7.1
> in ARM DDI 0487A.j for more details).
> 
> The current P2M code does not respect this sequence and may result to
> break coherency on some processors.
> 
> Adapting the current implementation to use break-before-make sequence would
> imply some code duplication and more TLBs invalidations than necessary.
> For instance, if we are replacing a 4KB page and the current mapping in
> the P2M is using a 1GB superpage, the following steps will happen:
>     1) Shatter the 1GB superpage into a series of 2MB superpages
>     2) Shatter the 2MB superpage into a series of 4KB superpages
>     3) Replace the 4KB page
> 
> As the current implementation is shattering while descending and install
> the mapping before continuing to the next level, Xen would need to issue 3
> TLB invalidation instructions which is clearly inefficient.
> 
> Furthermore, all the operations which modify the page table are using the
> same skeleton. It is more complicated to maintain different code paths than
> having a generic function that set an entry and take care of the break-before-
> make sequence.
> 
> The new implementation is based on the x86 EPT one which, I think, fits
> quite well for the break-before-make sequence whilst keeping the code
> simple.
> 
> For all the changes see in each patch.
> 
> I have provided a branch based on upstream here:
> git://xenbits.xen.org/people/julieng/xen-unstable.git branch p2m-v2

Committed


> Comments are welcome.
> 
> Yours sincerely,
> 
> Cc: Razvan Cojocaru <rcojocaru@bitdefender.com>
> Cc: Tamas K Lengyel <tamas@tklengyel.com>
> Cc: Shanker Donthineni <shankerd@codeaurora.org>
> Cc: Dirk Behme <dirk.behme@de.bosch.com>
> Cc: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
> 
> Julien Grall (23):
>   xen/arm: do_trap_instr_abort_guest: Move the IPA computation out of
>     the switch
>   xen/arm: p2m: Store in p2m_domain whether we need to clean the entry
>   xen/arm: p2m: Rename parameter in p2m_{remove,write}_pte...
>   xen/arm: p2m: Use typesafe gfn in p2m_mem_access_radix_set
>   xen/arm: p2m: Add a back pointer to domain in p2m_domain
>   xen/arm: traps: Move MMIO emulation code in a separate helper
>   xen/arm: traps: Check the P2M before injecting a data/instruction
>     abort
>   xen/arm: p2m: Invalidate the TLBs when write unlocking the p2m
>   xen/arm: p2m: Change the type of level_shifts from paddr_t to uint8_t
>   xen/arm: p2m: Move the lookup helpers at the top of the file
>   xen/arm: p2m: Introduce p2m_get_root_pointer and use it in
>     __p2m_lookup
>   xen/arm: p2m: Introduce p2m_get_entry and use it to implement
>     __p2m_lookup
>   xen/arm: p2m: Replace all usage of __p2m_lookup with p2m_get_entry
>   xen/arm: p2m: Re-implement p2m_cache_flush using p2m_get_entry
>   xen/arm: p2m: Make p2m_{valid,table,mapping} helpers inline
>   xen/arm: p2m: Introduce a helper to check if an entry is a superpage
>   xen/arm: p2m: Introduce p2m_set_entry and __p2m_set_entry
>   xen/arm: p2m: Re-implement relinquish_p2m_mapping using
>     p2m_{get,set}_entry
>   xen/arm: p2m: Re-implement p2m_remove_using using p2m_set_entry
>   xen/arm: p2m: Re-implement p2m_insert_mapping using p2m_set_entry
>   xen/arm: p2m: Re-implement p2m_set_mem_access using
>     p2m_{set,get}_entry
>   xen/arm: p2m: Do not handle shattering in p2m_create_table
>   xen/arm: p2m: Export p2m_*_lock helpers
> 
>  xen/arch/arm/domain.c      |    8 +-
>  xen/arch/arm/p2m.c         | 1316 ++++++++++++++++++++++----------------------
>  xen/arch/arm/traps.c       |  126 +++--
>  xen/include/asm-arm/p2m.h  |   63 +++
>  xen/include/asm-arm/page.h |    8 +
>  5 files changed, 828 insertions(+), 693 deletions(-)
> 
> -- 
> 1.9.1
> 

_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xen.org
https://lists.xen.org/xen-devel

      parent reply	other threads:[~2016-09-28  1:14 UTC|newest]

Thread overview: 37+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-09-15 11:28 [for-4.8][PATCH v2 00/23] xen/arm: Rework the P2M code to follow break-before-make sequence Julien Grall
2016-09-15 11:28 ` [for-4.8][PATCH v2 01/23] xen/arm: do_trap_instr_abort_guest: Move the IPA computation out of the switch Julien Grall
2016-09-15 11:28 ` [for-4.8][PATCH v2 02/23] xen/arm: p2m: Store in p2m_domain whether we need to clean the entry Julien Grall
2016-09-15 11:28 ` [for-4.8][PATCH v2 03/23] xen/arm: p2m: Rename parameter in p2m_{remove, write}_pte Julien Grall
2016-09-15 11:28 ` [for-4.8][PATCH v2 04/23] xen/arm: p2m: Use typesafe gfn in p2m_mem_access_radix_set Julien Grall
2016-09-15 11:28 ` [for-4.8][PATCH v2 05/23] xen/arm: p2m: Add a back pointer to domain in p2m_domain Julien Grall
2016-09-17  1:16   ` Stefano Stabellini
2016-09-15 11:28 ` [for-4.8][PATCH v2 06/23] xen/arm: traps: Move MMIO emulation code in a separate helper Julien Grall
2016-09-17  1:17   ` Stefano Stabellini
2016-09-15 11:28 ` [for-4.8][PATCH v2 07/23] xen/arm: traps: Check the P2M before injecting a data/instruction abort Julien Grall
2016-09-17  1:22   ` Stefano Stabellini
2016-09-15 11:28 ` [for-4.8][PATCH v2 08/23] xen/arm: p2m: Invalidate the TLBs when write unlocking the p2m Julien Grall
2016-09-15 11:28 ` [for-4.8][PATCH v2 09/23] xen/arm: p2m: Change the type of level_shifts from paddr_t to uint8_t Julien Grall
2016-09-17  1:23   ` Stefano Stabellini
2016-09-15 11:28 ` [for-4.8][PATCH v2 10/23] xen/arm: p2m: Move the lookup helpers at the top of the file Julien Grall
2016-09-15 11:28 ` [for-4.8][PATCH v2 11/23] xen/arm: p2m: Introduce p2m_get_root_pointer and use it in __p2m_lookup Julien Grall
2016-09-17  1:26   ` Stefano Stabellini
2016-09-15 11:28 ` [for-4.8][PATCH v2 12/23] xen/arm: p2m: Introduce p2m_get_entry and use it to implement __p2m_lookup Julien Grall
2016-09-17  1:36   ` Stefano Stabellini
2016-09-15 11:28 ` [for-4.8][PATCH v2 13/23] xen/arm: p2m: Replace all usage of __p2m_lookup with p2m_get_entry Julien Grall
2016-09-15 11:28 ` [for-4.8][PATCH v2 14/23] xen/arm: p2m: Re-implement p2m_cache_flush using p2m_get_entry Julien Grall
2016-09-17  1:42   ` Stefano Stabellini
2016-09-15 11:28 ` [for-4.8][PATCH v2 15/23] xen/arm: p2m: Make p2m_{valid, table, mapping} helpers inline Julien Grall
2016-09-15 11:28 ` [for-4.8][PATCH v2 16/23] xen/arm: p2m: Introduce a helper to check if an entry is a superpage Julien Grall
2016-09-15 11:28 ` [for-4.8][PATCH v2 17/23] xen/arm: p2m: Introduce p2m_set_entry and __p2m_set_entry Julien Grall
2016-09-22  2:18   ` Stefano Stabellini
2016-09-15 11:28 ` [for-4.8][PATCH v2 18/23] xen/arm: p2m: Re-implement relinquish_p2m_mapping using p2m_{get, set}_entry Julien Grall
2016-09-20  2:14   ` Stefano Stabellini
2016-09-15 11:28 ` [for-4.8][PATCH v2 19/23] xen/arm: p2m: Re-implement p2m_remove_using using p2m_set_entry Julien Grall
2016-09-15 11:28 ` [for-4.8][PATCH v2 20/23] xen/arm: p2m: Re-implement p2m_insert_mapping " Julien Grall
2016-09-15 11:28 ` [for-4.8][PATCH v2 21/23] xen/arm: p2m: Re-implement p2m_set_mem_access using p2m_{set, get}_entry Julien Grall
2016-09-15 11:41   ` Razvan Cojocaru
2016-09-15 11:28 ` [for-4.8][PATCH v2 22/23] xen/arm: p2m: Do not handle shattering in p2m_create_table Julien Grall
2016-09-15 13:50   ` Julien Grall
2016-09-15 11:28 ` [for-4.8][PATCH v2 23/23] xen/arm: p2m: Export p2m_*_lock helpers Julien Grall
2016-09-15 17:23 ` [for-4.8][PATCH v2 00/23] xen/arm: Rework the P2M code to follow break-before-make sequence Tamas K Lengyel
2016-09-28  1:14 ` Stefano Stabellini [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=alpine.DEB.2.10.1609271814440.9519@sstabellini-ThinkPad-X260 \
    --to=sstabellini@kernel.org \
    --cc=dirk.behme@de.bosch.com \
    --cc=edgar.iglesias@xilinx.com \
    --cc=julien.grall@arm.com \
    --cc=proskurin@sec.in.tum.de \
    --cc=rcojocaru@bitdefender.com \
    --cc=shankerd@codeaurora.org \
    --cc=steve.capper@arm.com \
    --cc=tamas@tklengyel.com \
    --cc=wei.chen@linaro.org \
    --cc=xen-devel@lists.xen.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.