All of lore.kernel.org
 help / color / mirror / Atom feed
From: Thomas Gleixner <tglx@linutronix.de>
To: David Miller <davem@davemloft.net>
Cc: arnd@arndb.de, linux-kernel@vger.kernel.org,
	peterz@infradead.org, mingo@kernel.org, dingtianhong@huawei.com,
	zhangfei.gao@linaro.org, dan.carpenter@oracle.com,
	netdev@vger.kernel.org
Subject: [patch v2] net: hip04: Make tx coalesce timer actually work
Date: Tue, 14 Apr 2015 21:42:42 +0200 (CEST)	[thread overview]
Message-ID: <alpine.DEB.2.11.1504142140290.3845@nanos> (raw)
In-Reply-To: <20150414.141529.797692010779414843.davem@davemloft.net>

The code sets the expiry value of the timer to a relative value and
starts it with hrtimer_start_expires. That's fine, but that only works
once. The timer is started in relative mode, so the expiry value gets
overwritten with the absolut expiry time (now + expiry).

So once the timer expired, a new call to hrtimer_start_expires results
in an immidiately expired timer, because the expiry value is
already in the past.

Use the proper mechanisms to (re)start the timer in the intended way.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: dingtianhong <dingtianhong@huawei.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Zhangfei Gao <zhangfei.gao@linaro.org>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: netdev@vger.kernel.org
---
 drivers/net/ethernet/hisilicon/hip04_eth.c |   18 +++++++++++-------
 1 file changed, 11 insertions(+), 7 deletions(-)

Index: linux/drivers/net/ethernet/hisilicon/hip04_eth.c
===================================================================
--- linux.orig/drivers/net/ethernet/hisilicon/hip04_eth.c
+++ linux/drivers/net/ethernet/hisilicon/hip04_eth.c
@@ -413,6 +413,15 @@ out:
 	return count;
 }
 
+static void hip04_start_tx_timer(struct hip04_priv *priv)
+{
+	unsigned long ns = priv->tx_coalesce_usecs * NSEC_PER_USEC / 2;
+
+	/* allow timer to fire after half the time at the earliest */
+	hrtimer_start_range_ns(&priv->tx_coalesce_timer, ns_to_ktime(ns),
+			       ns, HRTIMER_MODE_REL);
+}
+
 static int hip04_mac_start_xmit(struct sk_buff *skb, struct net_device *ndev)
 {
 	struct hip04_priv *priv = netdev_priv(ndev);
@@ -466,8 +475,7 @@ static int hip04_mac_start_xmit(struct s
 		}
 	} else if (!hrtimer_is_queued(&priv->tx_coalesce_timer)) {
 		/* cleanup not pending yet, start a new timer */
-		hrtimer_start_expires(&priv->tx_coalesce_timer,
-				      HRTIMER_MODE_REL);
+		hip04_start_tx_timer(priv);
 	}
 
 	return NETDEV_TX_OK;
@@ -549,7 +557,7 @@ done:
 	/* clean up tx descriptors and start a new timer if necessary */
 	tx_remaining = hip04_tx_reclaim(ndev, false);
 	if (rx < budget && tx_remaining)
-		hrtimer_start_expires(&priv->tx_coalesce_timer, HRTIMER_MODE_REL);
+		hip04_start_tx_timer(priv);
 
 	return rx;
 }
@@ -809,7 +817,6 @@ static int hip04_mac_probe(struct platfo
 	struct hip04_priv *priv;
 	struct resource *res;
 	unsigned int irq;
-	ktime_t txtime;
 	int ret;
 
 	ndev = alloc_etherdev(sizeof(struct hip04_priv));
@@ -846,9 +853,6 @@ static int hip04_mac_probe(struct platfo
 	 */
 	priv->tx_coalesce_frames = TX_DESC_NUM * 3 / 4;
 	priv->tx_coalesce_usecs = 200;
-	/* allow timer to fire after half the time at the earliest */
-	txtime = ktime_set(0, priv->tx_coalesce_usecs * NSEC_PER_USEC / 2);
-	hrtimer_set_expires_range(&priv->tx_coalesce_timer, txtime, txtime);
 	priv->tx_coalesce_timer.function = tx_done;
 
 	priv->map = syscon_node_to_regmap(arg.np);

  reply	other threads:[~2015-04-14 19:42 UTC|newest]

Thread overview: 21+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-04-13 21:02 [patch 0/5] hrtimer: Cleanup usage trainwrecks treewide Thomas Gleixner
2015-04-13 21:02 ` [patch 1/5] perf: Fixup hrtimer forward wreckage Thomas Gleixner
2015-04-14 22:10   ` Stephane Eranian
2015-04-13 21:02 ` [patch 2/5] s390: crypto: Protect poll timeout update Thomas Gleixner
2015-04-17 13:27   ` Ingo Tuchscherer
2015-04-13 21:02 ` [patch 3/5] hrtimer: Document hrtimer_forward[_now]() proper Thomas Gleixner
2015-04-22 19:04   ` [tip:timers/core] " tip-bot for Thomas Gleixner
2015-04-13 21:02 ` [patch 4/5] net: hip04: Make tx coalesce timer actually work Thomas Gleixner
2015-04-13 21:24   ` Arnd Bergmann
2015-04-13 21:42     ` Thomas Gleixner
2015-04-13 22:03       ` Arnd Bergmann
2015-04-13 22:08         ` Thomas Gleixner
2015-04-14  7:53           ` Ding Tianhong
2015-04-14 18:15           ` David Miller
2015-04-14 19:42             ` Thomas Gleixner [this message]
2015-04-15  2:24               ` [patch v2] " Ding Tianhong
2015-04-15 10:20               ` Arnd Bergmann
2015-04-15 21:22               ` David Miller
2015-04-13 21:02 ` [patch 5/5] staging: ozwpan: Fix hrtimer wreckage Thomas Gleixner
2015-04-13 21:25   ` Greg Kroah-Hartman
2015-07-20  9:40   ` [tip:timers/core] " tip-bot for Thomas Gleixner

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=alpine.DEB.2.11.1504142140290.3845@nanos \
    --to=tglx@linutronix.de \
    --cc=arnd@arndb.de \
    --cc=dan.carpenter@oracle.com \
    --cc=davem@davemloft.net \
    --cc=dingtianhong@huawei.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mingo@kernel.org \
    --cc=netdev@vger.kernel.org \
    --cc=peterz@infradead.org \
    --cc=zhangfei.gao@linaro.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.