On Wed, 10 May 2017, Christophe JAILLET wrote: > Le 09/05/2017 à 17:18, Joe Perches a écrit : > > On Mon, 2017-05-08 at 17:35 -0700, Florian Fainelli wrote: > > > On 05/08/2017 04:46 PM, Julia Lawall wrote: > > > > On Mon, 8 May 2017, Joe Perches wrote: > > > > > Each time -EPROBE_DEFER occurs, another set of calls to > > > > > dsa_switch_alloc and dev_kzalloc also occurs. > > > > > > > > > > Perhaps it'd be better to do: > > > > > > > > > > if (ps->netdev) { > > > > > devm_kfree(&devmdev->dev, ps); > > > > > devm_kfree(&mdiodev->dev, ds); > > > > > return -EPROBE_DEFER; > > > > > } > > > > Is EPROBE_DEFER handled differently than other kinds of errors? > > > In the core device driver model, yes, EPROBE_DEFER is treated > > > differently than other errors because it puts the driver on a retry queue. > > > > > > EPROBE_DEFER is already a slow and exceptional path, and this is a > > > mock-up driver, so I am not sure what value there is in trying to > > > balance devm_kzalloc() with corresponding devm_kfree()... > > Example code should be as correct as possible. > > > Le 09/05/2017 à 17:18, Joe Perches a écrit : > > On Mon, 2017-05-08 at 17:35 -0700, Florian Fainelli wrote: > > > On 05/08/2017 04:46 PM, Julia Lawall wrote: > > > > On Mon, 8 May 2017, Joe Perches wrote: > > > > > Each time -EPROBE_DEFER occurs, another set of calls to > > > > > dsa_switch_alloc and dev_kzalloc also occurs. > > > > > > > > > > Perhaps it'd be better to do: > > > > > > > > > > if (ps->netdev) { > > > > > devm_kfree(&devmdev->dev, ps); > > > > > devm_kfree(&mdiodev->dev, ds); > > > > > return -EPROBE_DEFER; > > > > > } > > > > Is EPROBE_DEFER handled differently than other kinds of errors? > > > In the core device driver model, yes, EPROBE_DEFER is treated > > > differently than other errors because it puts the driver on a retry queue. > > > > > > EPROBE_DEFER is already a slow and exceptional path, and this is a > > > mock-up driver, so I am not sure what value there is in trying to > > > balance devm_kzalloc() with corresponding devm_kfree()... > > Example code should be as correct as possible. > > > (* number of people/mailing list in copy has been reduced *) > > > The coccinelle script below gives the following list of candidates for such > improvement. > > char/hw_random/omap-rng.c > clk/clk-si5351.c > clk/clk-versaclock5.c > crypto/mediatek/mtk-platform.c > devfreq/rk3399_dmc.c > dma/mv_xor_v2.c > dma/omap-dma.c > gpu/drm/arc/arcpgu_hdmi.c > gpu/drm/bridge/dumb-vga-dac.c > gpu/drm/bridge/lvds-encoder.c > gpu/drm/exynos/exynos_dp.c > gpu/drm/exynos/exynos_drm_dsi.c > gpu/drm/imx/dw_hdmi-imx.c > gpu/drm/mediatek/mtk_dpi.c > gpu/drm/mediatek/mtk_drm_ddp_comp.c > gpu/drm/mediatek/mtk_dsi.c > gpu/drm/panel/panel-lvds.c > gpu/drm/panel/panel-simple.c > gpu/drm/panel/panel-sitronix-st7789v.c > gpu/drm/rcar-du/rcar_du_lvdscon.c > gpu/drm/rockchip/cdn-dp-core.c > gpu/drm/rockchip/dw_hdmi-rockchip.c > gpu/drm/sti/sti_hdmi.c > gpu/drm/tegra/sor.c > gpu/drm/tilcdc/tilcdc_panel.c > gpu/drm/vc4/vc4_hdmi.c > gpu/ipu-v3/ipu-common.c > gpu/ipu-v3/ipu-pre.c > gpu/ipu-v3/ipu-prg.c > hwtracing/coresight/coresight-stm.c > i2c/busses/i2c-designware-platdrv.c > i2c/busses/i2c-mv64xxx.c > i2c/muxes/i2c-mux-gpio.c > i2c/muxes/i2c-mux-pinctrl.c > i2c/muxes/i2c-mux-reg.c > iommu/mtk_iommu.c > iommu/mtk_iommu_v1.c > irqchip/qcom-irq-combiner.c > mailbox/mailbox-test.c > media/i2c/mt9m111.c > media/i2c/ov2640.c > media/i2c/ov7670.c > media/i2c/smiapp/smiapp-core.c > media/i2c/soc_camera/imx074.c > media/platform/coda/coda-common.c > media/platform/mtk-vcodec/mtk_vcodec_dec_drv.c > media/platform/mtk-vcodec/mtk_vcodec_enc_drv.c > media/platform/s5p-cec/s5p_cec.c > media/platform/sti/cec/stih-cec.c > memory/tegra/tegra124-emc.c > mfd/twl6040.c > mtd/nand/lpc32xx_mlc.c > mtd/nand/lpc32xx_slc.c > net/dsa/dsa_loop.c > net/ethernet/mediatek/mtk_eth_soc.c > net/phy/xilinx_gmii2rgmii.c > net/wireless/ti/wlcore/spi.c > pci/host/pcie-iproc-platform.c > phy/phy-exynos5250-sata.c > phy/phy-mt65xx-usb3.c > phy/phy-qcom-qusb2.c > phy/phy-sun4i-usb.c > pinctrl/core.c > pinctrl/pinctrl-at91.c > platform/x86/intel_cht_int33fe.c > power/supply/act8945a_charger.c > power/supply/axp20x_ac_power.c > power/supply/axp20x_battery.c > power/supply/axp288_charger.c > power/supply/bq24190_charger.c > power/supply/cpcap-charger.c > power/supply/gpio-charger.c > soc/bcm/raspberrypi-power.c > thermal/samsung/exynos_tmu.c > tty/serial/8250/8250_dw.c > tty/serial/max310x.c > tty/serial/sccnxp.c > usb/chipidea/ci_hdrc_msm.c > usb/gadget/udc/mv_udc_core.c > usb/host/xhci-mtk.c > usb/mtu3/mtu3_plat.c > usb/musb/sunxi.c > usb/phy/phy-am335x.c > usb/phy/phy-generic.c > usb/phy/phy-twl6030-usb.c > video/backlight/hx8357.c > video/backlight/lp855x_bl.c > video/fbdev/simplefb.c > > > Coccinelle script : > ================= > // find calls to kmalloc or equivalent function > @call@ > expression ptr; > position p; > @@ > > ( > * ptr@p = kmalloc(...) > | > * ptr@p = kzalloc(...) > | > * ptr@p = kcalloc(...) > | > * ptr@p = kmalloc_array(...) Do you get any reports for the above function? Those would normally just be memory leaks. julia > | > * ptr@p = devm_kmalloc(...) > | > * ptr@p = devm_kzalloc(...) > | > * ptr@p = devm_kcalloc(...) > | > * ptr@p = devm_kmalloc_array(...) > ) > ... > * return -EPROBE_DEFER; > > -- > To unsubscribe from this list: send the line "unsubscribe kernel-janitors" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html >