From: Thomas Gleixner <tglx@linutronix.de>
To: Linus Torvalds <torvalds@linux-foundation.org>
Cc: LKML <linux-kernel@vger.kernel.org>, Ingo Molnar <mingo@kernel.org>
Subject: [GIT pull] timer updates for 4.17
Date: Mon, 16 Apr 2018 20:47:31 +0200 (CEST) [thread overview]
Message-ID: <alpine.DEB.2.21.1804162044350.1833@nanos.tec.linutronix.de> (raw)
Linus,
please consider to pull the latest timers-core-for-linus git tree from:
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git timers-core-for-linus
That's a branch which got forgotten during the merge window, but it
contains only fixes and hardware enablement. No fundamental changes.
- Various fixes for the imx-tpm clocksource driver
- A new timer driver for the NCPM7xx SoC family
Thanks,
tglx
------------------>
Anson Huang (4):
dt-bindings: timer: tpm: fix typo of clock name
clocksource/drivers/imx-tpm: Fix typo of clock name
clocksource/drivers/imx-tpm: Correct some registers operation flow
clocksource/drivers/imx-tpm: Add different counter width support
Tomer Maimon (2):
dt-binding: timer: document NPCM7xx timer DT bindings
clocksource/drivers/npcm: Add NPCM7xx timer driver
.../bindings/timer/nuvoton,npcm7xx-timer.txt | 21 ++
.../devicetree/bindings/timer/nxp,tpm-timer.txt | 2 +-
drivers/clocksource/Kconfig | 8 +
drivers/clocksource/Makefile | 1 +
drivers/clocksource/timer-imx-tpm.c | 43 ++++-
drivers/clocksource/timer-npcm7xx.c | 215 +++++++++++++++++++++
6 files changed, 279 insertions(+), 11 deletions(-)
create mode 100644 Documentation/devicetree/bindings/timer/nuvoton,npcm7xx-timer.txt
create mode 100644 drivers/clocksource/timer-npcm7xx.c
diff --git a/Documentation/devicetree/bindings/timer/nuvoton,npcm7xx-timer.txt b/Documentation/devicetree/bindings/timer/nuvoton,npcm7xx-timer.txt
new file mode 100644
index 000000000000..ea22dfe485be
--- /dev/null
+++ b/Documentation/devicetree/bindings/timer/nuvoton,npcm7xx-timer.txt
@@ -0,0 +1,21 @@
+Nuvoton NPCM7xx timer
+
+Nuvoton NPCM7xx have three timer modules, each timer module provides five 24-bit
+timer counters.
+
+Required properties:
+- compatible : "nuvoton,npcm750-timer" for Poleg NPCM750.
+- reg : Offset and length of the register set for the device.
+- interrupts : Contain the timer interrupt with flags for
+ falling edge.
+- clocks : phandle of timer reference clock (usually a 25 MHz clock).
+
+Example:
+
+timer@f0008000 {
+ compatible = "nuvoton,npcm750-timer";
+ interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0xf0008000 0x50>;
+ clocks = <&clk NPCM7XX_CLK_TIMER>;
+};
+
diff --git a/Documentation/devicetree/bindings/timer/nxp,tpm-timer.txt b/Documentation/devicetree/bindings/timer/nxp,tpm-timer.txt
index b4aa7ddb5b13..f82087b220f4 100644
--- a/Documentation/devicetree/bindings/timer/nxp,tpm-timer.txt
+++ b/Documentation/devicetree/bindings/timer/nxp,tpm-timer.txt
@@ -15,7 +15,7 @@ Required properties:
- interrupts : Should be the clock event device interrupt.
- clocks : The clocks provided by the SoC to drive the timer, must contain
an entry for each entry in clock-names.
-- clock-names : Must include the following entries: "igp" and "per".
+- clock-names : Must include the following entries: "ipg" and "per".
Example:
tpm5: tpm@40260000 {
diff --git a/drivers/clocksource/Kconfig b/drivers/clocksource/Kconfig
index b3b4ed9b6874..76194bc20bdf 100644
--- a/drivers/clocksource/Kconfig
+++ b/drivers/clocksource/Kconfig
@@ -130,6 +130,14 @@ config VT8500_TIMER
help
Enables support for the VT8500 driver.
+config NPCM7XX_TIMER
+ bool "NPCM7xx timer driver" if COMPILE_TEST
+ depends on HAS_IOMEM
+ select CLKSRC_MMIO
+ help
+ Enable 24-bit TIMER0 and TIMER1 counters in the NPCM7xx architecture,
+ While TIMER0 serves as clockevent and TIMER1 serves as clocksource.
+
config CADENCE_TTC_TIMER
bool "Cadence TTC timer driver" if COMPILE_TEST
depends on COMMON_CLK
diff --git a/drivers/clocksource/Makefile b/drivers/clocksource/Makefile
index d6dec4489d66..74387877f7cf 100644
--- a/drivers/clocksource/Makefile
+++ b/drivers/clocksource/Makefile
@@ -55,6 +55,7 @@ obj-$(CONFIG_CLKSRC_NPS) += timer-nps.o
obj-$(CONFIG_OXNAS_RPS_TIMER) += timer-oxnas-rps.o
obj-$(CONFIG_OWL_TIMER) += owl-timer.o
obj-$(CONFIG_SPRD_TIMER) += timer-sprd.o
+obj-$(CONFIG_NPCM7XX_TIMER) += timer-npcm7xx.o
obj-$(CONFIG_ARC_TIMERS) += arc_timer.o
obj-$(CONFIG_ARM_ARCH_TIMER) += arm_arch_timer.o
diff --git a/drivers/clocksource/timer-imx-tpm.c b/drivers/clocksource/timer-imx-tpm.c
index 21bffdcb2f20..05d97a6871d8 100644
--- a/drivers/clocksource/timer-imx-tpm.c
+++ b/drivers/clocksource/timer-imx-tpm.c
@@ -17,9 +17,14 @@
#include <linux/of_irq.h>
#include <linux/sched_clock.h>
+#define TPM_PARAM 0x4
+#define TPM_PARAM_WIDTH_SHIFT 16
+#define TPM_PARAM_WIDTH_MASK (0xff << 16)
#define TPM_SC 0x10
#define TPM_SC_CMOD_INC_PER_CNT (0x1 << 3)
#define TPM_SC_CMOD_DIV_DEFAULT 0x3
+#define TPM_SC_CMOD_DIV_MAX 0x7
+#define TPM_SC_TOF_MASK (0x1 << 7)
#define TPM_CNT 0x14
#define TPM_MOD 0x18
#define TPM_STATUS 0x1c
@@ -29,8 +34,11 @@
#define TPM_C0SC_MODE_SHIFT 2
#define TPM_C0SC_MODE_MASK 0x3c
#define TPM_C0SC_MODE_SW_COMPARE 0x4
+#define TPM_C0SC_CHF_MASK (0x1 << 7)
#define TPM_C0V 0x24
+static int counter_width;
+static int rating;
static void __iomem *timer_base;
static struct clock_event_device clockevent_tpm;
@@ -83,10 +91,11 @@ static int __init tpm_clocksource_init(unsigned long rate)
tpm_delay_timer.freq = rate;
register_current_timer_delay(&tpm_delay_timer);
- sched_clock_register(tpm_read_sched_clock, 32, rate);
+ sched_clock_register(tpm_read_sched_clock, counter_width, rate);
return clocksource_mmio_init(timer_base + TPM_CNT, "imx-tpm",
- rate, 200, 32, clocksource_mmio_readl_up);
+ rate, rating, counter_width,
+ clocksource_mmio_readl_up);
}
static int tpm_set_next_event(unsigned long delta,
@@ -139,7 +148,6 @@ static struct clock_event_device clockevent_tpm = {
.set_state_oneshot = tpm_set_state_oneshot,
.set_next_event = tpm_set_next_event,
.set_state_shutdown = tpm_set_state_shutdown,
- .rating = 200,
};
static int __init tpm_clockevent_init(unsigned long rate, int irq)
@@ -149,10 +157,11 @@ static int __init tpm_clockevent_init(unsigned long rate, int irq)
ret = request_irq(irq, tpm_timer_interrupt, IRQF_TIMER | IRQF_IRQPOLL,
"i.MX7ULP TPM Timer", &clockevent_tpm);
+ clockevent_tpm.rating = rating;
clockevent_tpm.cpumask = cpumask_of(0);
clockevent_tpm.irq = irq;
- clockevents_config_and_register(&clockevent_tpm,
- rate, 300, 0xfffffffe);
+ clockevents_config_and_register(&clockevent_tpm, rate, 300,
+ GENMASK(counter_width - 1, 1));
return ret;
}
@@ -179,7 +188,7 @@ static int __init tpm_timer_init(struct device_node *np)
ipg = of_clk_get_by_name(np, "ipg");
per = of_clk_get_by_name(np, "per");
if (IS_ERR(ipg) || IS_ERR(per)) {
- pr_err("tpm: failed to get igp or per clk\n");
+ pr_err("tpm: failed to get ipg or per clk\n");
ret = -ENODEV;
goto err_clk_get;
}
@@ -197,6 +206,11 @@ static int __init tpm_timer_init(struct device_node *np)
goto err_per_clk_enable;
}
+ counter_width = (readl(timer_base + TPM_PARAM) & TPM_PARAM_WIDTH_MASK)
+ >> TPM_PARAM_WIDTH_SHIFT;
+ /* use rating 200 for 32-bit counter and 150 for 16-bit counter */
+ rating = counter_width == 0x20 ? 200 : 150;
+
/*
* Initialize tpm module to a known state
* 1) Counter disabled
@@ -205,16 +219,25 @@ static int __init tpm_timer_init(struct device_node *np)
* 4) Channel0 disabled
* 5) DMA transfers disabled
*/
+ /* make sure counter is disabled */
writel(0, timer_base + TPM_SC);
+ /* TOF is W1C */
+ writel(TPM_SC_TOF_MASK, timer_base + TPM_SC);
writel(0, timer_base + TPM_CNT);
- writel(0, timer_base + TPM_C0SC);
+ /* CHF is W1C */
+ writel(TPM_C0SC_CHF_MASK, timer_base + TPM_C0SC);
- /* increase per cnt, div 8 by default */
- writel(TPM_SC_CMOD_INC_PER_CNT | TPM_SC_CMOD_DIV_DEFAULT,
+ /*
+ * increase per cnt,
+ * div 8 for 32-bit counter and div 128 for 16-bit counter
+ */
+ writel(TPM_SC_CMOD_INC_PER_CNT |
+ (counter_width == 0x20 ?
+ TPM_SC_CMOD_DIV_DEFAULT : TPM_SC_CMOD_DIV_MAX),
timer_base + TPM_SC);
/* set MOD register to maximum for free running mode */
- writel(0xffffffff, timer_base + TPM_MOD);
+ writel(GENMASK(counter_width - 1, 0), timer_base + TPM_MOD);
rate = clk_get_rate(per) >> 3;
ret = tpm_clocksource_init(rate);
diff --git a/drivers/clocksource/timer-npcm7xx.c b/drivers/clocksource/timer-npcm7xx.c
new file mode 100644
index 000000000000..7a9bb5532d99
--- /dev/null
+++ b/drivers/clocksource/timer-npcm7xx.c
@@ -0,0 +1,215 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2014-2018 Nuvoton Technologies tomer.maimon@nuvoton.com
+ * All rights reserved.
+ *
+ * Copyright 2017 Google, Inc.
+ */
+
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/clockchips.h>
+#include <linux/of_irq.h>
+#include <linux/of_address.h>
+#include "timer-of.h"
+
+/* Timers registers */
+#define NPCM7XX_REG_TCSR0 0x0 /* Timer 0 Control and Status Register */
+#define NPCM7XX_REG_TICR0 0x8 /* Timer 0 Initial Count Register */
+#define NPCM7XX_REG_TCSR1 0x4 /* Timer 1 Control and Status Register */
+#define NPCM7XX_REG_TICR1 0xc /* Timer 1 Initial Count Register */
+#define NPCM7XX_REG_TDR1 0x14 /* Timer 1 Data Register */
+#define NPCM7XX_REG_TISR 0x18 /* Timer Interrupt Status Register */
+
+/* Timers control */
+#define NPCM7XX_Tx_RESETINT 0x1f
+#define NPCM7XX_Tx_PERIOD BIT(27)
+#define NPCM7XX_Tx_INTEN BIT(29)
+#define NPCM7XX_Tx_COUNTEN BIT(30)
+#define NPCM7XX_Tx_ONESHOT 0x0
+#define NPCM7XX_Tx_OPER GENMASK(3, 27)
+#define NPCM7XX_Tx_MIN_PRESCALE 0x1
+#define NPCM7XX_Tx_TDR_MASK_BITS 24
+#define NPCM7XX_Tx_MAX_CNT 0xFFFFFF
+#define NPCM7XX_T0_CLR_INT 0x1
+#define NPCM7XX_Tx_CLR_CSR 0x0
+
+/* Timers operating mode */
+#define NPCM7XX_START_PERIODIC_Tx (NPCM7XX_Tx_PERIOD | NPCM7XX_Tx_COUNTEN | \
+ NPCM7XX_Tx_INTEN | \
+ NPCM7XX_Tx_MIN_PRESCALE)
+
+#define NPCM7XX_START_ONESHOT_Tx (NPCM7XX_Tx_ONESHOT | NPCM7XX_Tx_COUNTEN | \
+ NPCM7XX_Tx_INTEN | \
+ NPCM7XX_Tx_MIN_PRESCALE)
+
+#define NPCM7XX_START_Tx (NPCM7XX_Tx_COUNTEN | NPCM7XX_Tx_PERIOD | \
+ NPCM7XX_Tx_MIN_PRESCALE)
+
+#define NPCM7XX_DEFAULT_CSR (NPCM7XX_Tx_CLR_CSR | NPCM7XX_Tx_MIN_PRESCALE)
+
+static int npcm7xx_timer_resume(struct clock_event_device *evt)
+{
+ struct timer_of *to = to_timer_of(evt);
+ u32 val;
+
+ val = readl(timer_of_base(to) + NPCM7XX_REG_TCSR0);
+ val |= NPCM7XX_Tx_COUNTEN;
+ writel(val, timer_of_base(to) + NPCM7XX_REG_TCSR0);
+
+ return 0;
+}
+
+static int npcm7xx_timer_shutdown(struct clock_event_device *evt)
+{
+ struct timer_of *to = to_timer_of(evt);
+ u32 val;
+
+ val = readl(timer_of_base(to) + NPCM7XX_REG_TCSR0);
+ val &= ~NPCM7XX_Tx_COUNTEN;
+ writel(val, timer_of_base(to) + NPCM7XX_REG_TCSR0);
+
+ return 0;
+}
+
+static int npcm7xx_timer_oneshot(struct clock_event_device *evt)
+{
+ struct timer_of *to = to_timer_of(evt);
+ u32 val;
+
+ val = readl(timer_of_base(to) + NPCM7XX_REG_TCSR0);
+ val &= ~NPCM7XX_Tx_OPER;
+
+ val = readl(timer_of_base(to) + NPCM7XX_REG_TCSR0);
+ val |= NPCM7XX_START_ONESHOT_Tx;
+ writel(val, timer_of_base(to) + NPCM7XX_REG_TCSR0);
+
+ return 0;
+}
+
+static int npcm7xx_timer_periodic(struct clock_event_device *evt)
+{
+ struct timer_of *to = to_timer_of(evt);
+ u32 val;
+
+ val = readl(timer_of_base(to) + NPCM7XX_REG_TCSR0);
+ val &= ~NPCM7XX_Tx_OPER;
+
+ writel(timer_of_period(to), timer_of_base(to) + NPCM7XX_REG_TICR0);
+ val |= NPCM7XX_START_PERIODIC_Tx;
+
+ writel(val, timer_of_base(to) + NPCM7XX_REG_TCSR0);
+
+ return 0;
+}
+
+static int npcm7xx_clockevent_set_next_event(unsigned long evt,
+ struct clock_event_device *clk)
+{
+ struct timer_of *to = to_timer_of(clk);
+ u32 val;
+
+ writel(evt, timer_of_base(to) + NPCM7XX_REG_TICR0);
+ val = readl(timer_of_base(to) + NPCM7XX_REG_TCSR0);
+ val |= NPCM7XX_START_Tx;
+ writel(val, timer_of_base(to) + NPCM7XX_REG_TCSR0);
+
+ return 0;
+}
+
+static irqreturn_t npcm7xx_timer0_interrupt(int irq, void *dev_id)
+{
+ struct clock_event_device *evt = (struct clock_event_device *)dev_id;
+ struct timer_of *to = to_timer_of(evt);
+
+ writel(NPCM7XX_T0_CLR_INT, timer_of_base(to) + NPCM7XX_REG_TISR);
+
+ evt->event_handler(evt);
+
+ return IRQ_HANDLED;
+}
+
+static struct timer_of npcm7xx_to = {
+ .flags = TIMER_OF_IRQ | TIMER_OF_BASE | TIMER_OF_CLOCK,
+
+ .clkevt = {
+ .name = "npcm7xx-timer0",
+ .features = CLOCK_EVT_FEAT_PERIODIC |
+ CLOCK_EVT_FEAT_ONESHOT,
+ .set_next_event = npcm7xx_clockevent_set_next_event,
+ .set_state_shutdown = npcm7xx_timer_shutdown,
+ .set_state_periodic = npcm7xx_timer_periodic,
+ .set_state_oneshot = npcm7xx_timer_oneshot,
+ .tick_resume = npcm7xx_timer_resume,
+ .rating = 300,
+ },
+
+ .of_irq = {
+ .handler = npcm7xx_timer0_interrupt,
+ .flags = IRQF_TIMER | IRQF_IRQPOLL,
+ },
+};
+
+static void __init npcm7xx_clockevents_init(void)
+{
+ writel(NPCM7XX_DEFAULT_CSR,
+ timer_of_base(&npcm7xx_to) + NPCM7XX_REG_TCSR0);
+
+ writel(NPCM7XX_Tx_RESETINT,
+ timer_of_base(&npcm7xx_to) + NPCM7XX_REG_TISR);
+
+ npcm7xx_to.clkevt.cpumask = cpumask_of(0);
+ clockevents_config_and_register(&npcm7xx_to.clkevt,
+ timer_of_rate(&npcm7xx_to),
+ 0x1, NPCM7XX_Tx_MAX_CNT);
+}
+
+static void __init npcm7xx_clocksource_init(void)
+{
+ u32 val;
+
+ writel(NPCM7XX_DEFAULT_CSR,
+ timer_of_base(&npcm7xx_to) + NPCM7XX_REG_TCSR1);
+ writel(NPCM7XX_Tx_MAX_CNT,
+ timer_of_base(&npcm7xx_to) + NPCM7XX_REG_TICR1);
+
+ val = readl(timer_of_base(&npcm7xx_to) + NPCM7XX_REG_TCSR1);
+ val |= NPCM7XX_START_Tx;
+ writel(val, timer_of_base(&npcm7xx_to) + NPCM7XX_REG_TCSR1);
+
+ clocksource_mmio_init(timer_of_base(&npcm7xx_to) +
+ NPCM7XX_REG_TDR1,
+ "npcm7xx-timer1", timer_of_rate(&npcm7xx_to),
+ 200, (unsigned int)NPCM7XX_Tx_TDR_MASK_BITS,
+ clocksource_mmio_readl_down);
+}
+
+static int __init npcm7xx_timer_init(struct device_node *np)
+{
+ int ret;
+
+ ret = timer_of_init(np, &npcm7xx_to);
+ if (ret)
+ return ret;
+
+ /* Clock input is divided by PRESCALE + 1 before it is fed */
+ /* to the counter */
+ npcm7xx_to.of_clk.rate = npcm7xx_to.of_clk.rate /
+ (NPCM7XX_Tx_MIN_PRESCALE + 1);
+
+ npcm7xx_clocksource_init();
+ npcm7xx_clockevents_init();
+
+ pr_info("Enabling NPCM7xx clocksource timer base: %px, IRQ: %d ",
+ timer_of_base(&npcm7xx_to), timer_of_irq(&npcm7xx_to));
+
+ return 0;
+}
+
+TIMER_OF_DECLARE(npcm7xx, "nuvoton,npcm750-timer", npcm7xx_timer_init);
+
next reply other threads:[~2018-04-16 18:47 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-04-16 18:47 Thomas Gleixner [this message]
2018-04-29 14:59 [GIT pull] timer updates for 4.17 Thomas Gleixner
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=alpine.DEB.2.21.1804162044350.1833@nanos.tec.linutronix.de \
--to=tglx@linutronix.de \
--cc=linux-kernel@vger.kernel.org \
--cc=mingo@kernel.org \
--cc=torvalds@linux-foundation.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.