All of lore.kernel.org
 help / color / mirror / Atom feed
* [Announce] 2.6.29-rc4-rt1
@ 2009-02-11 22:43 Thomas Gleixner
  2009-02-12  0:50 ` Frederic Weisbecker
                   ` (2 more replies)
  0 siblings, 3 replies; 359+ messages in thread
From: Thomas Gleixner @ 2009-02-11 22:43 UTC (permalink / raw)
  To: LKML
  Cc: rt-users, Ingo Molnar, Steven Rostedt, Peter Zijlstra,
	Carsten Emde, Clark Williams

After a 1.5 years sabbatical from preempt-rt we are pleased to
announce a refactored preempt-rt patch against linux-2.6.29-rc4.

The patch is working on x86 (32 and 64bit) but we have not yet updated
ARM, PPC and MIPS (work in progress).

We also dropped some experimental features of the base preempt-rt
queue 2.6.26.8-rt15 simply because we wanted to survive the forward
port over 3 kernel releases with the least amount of surprises. These
features (e.g. multiple reader PI locks) are not essential for the
preempt-rt functionality and need some serious overhaul anyway.

The interested -rt observer might have noticed that we based our work
on the 2.6.26.8-rt15 patch queue and did not pick the git-rt tree
which is based on 2.6.28. The reason for this is that we wanted to pick
the most stable patch queue and the git-rt tree has a lot of rewritten
new code. Our work is not making the work which was done over the last
months in the git-rt tree obsolete, quite the contrary: we want to
provide a stable yet latest-kernel based foundation and integrate those
changes gradually, as they become ready.

The further plan for the new -rt series is to merge it fully into git
and integrate it into the -tip git tree so it gets the same treatment
as all of our -tip based work: fully automated compile and boot
testing. Furthermore an automated multi architecture -rt performance
regression test based on the same infrastructure is currently being
built.

The integration into the -tip tree also allows us to seperate out parts
of -rt which are ready for mainline more easily and integrate them
with our usual propagation to mainline.

The structure of the patches is likely to change over the next days
when we tackle the git integration, but we appreciate your feedback in
the form of comments, bugreports and patches.

Enough said. You can find the new patches at the following location:

  http://www.kernel.org/pub/linux/kernel/projects/rt/

Information on the RT patch can be found at:

  http://rt.wiki.kernel.org/index.php/Main_Page

to build the 2.6.29-rc4-rt1 tree, the following patches should be
applied:

  http://www.kernel.org/pub/linux/kernel/v2.6/testing/linux-2.6.29-rc4.tar.bz2
  http://www.kernel.org/pub/linux/kernel/projects/rt/patch-2.6.29-rc4-rt1.bz2

The broken out patches are also available at the same download
location.

Enjoy !

      Thomas, Ingo

^ permalink raw reply	[flat|nested] 359+ messages in thread

* Re: [Announce] 2.6.29-rc4-rt1
  2009-02-11 22:43 [Announce] 2.6.29-rc4-rt1 Thomas Gleixner
@ 2009-02-12  0:50 ` Frederic Weisbecker
  2009-02-12  2:12   ` Frederic Weisbecker
  2009-02-12  2:55 ` [Announce] 2.6.29-rc4-rt1 Clark Williams
  2009-02-12 22:56 ` [Announce] 2.6.29-rc4-rt2 Thomas Gleixner
  2 siblings, 1 reply; 359+ messages in thread
From: Frederic Weisbecker @ 2009-02-12  0:50 UTC (permalink / raw)
  To: Thomas Gleixner
  Cc: LKML, rt-users, Ingo Molnar, Steven Rostedt, Peter Zijlstra,
	Carsten Emde, Clark Williams

[-- Attachment #1: Type: text/plain, Size: 2053 bytes --]

On Wed, Feb 11, 2009 at 11:43:44PM +0100, Thomas Gleixner wrote:
> After a 1.5 years sabbatical from preempt-rt we are pleased to
> announce a refactored preempt-rt patch against linux-2.6.29-rc4.
> 
> The patch is working on x86 (32 and 64bit) but we have not yet updated
> ARM, PPC and MIPS (work in progress).
> 
> We also dropped some experimental features of the base preempt-rt
> queue 2.6.26.8-rt15 simply because we wanted to survive the forward
> port over 3 kernel releases with the least amount of surprises. These
> features (e.g. multiple reader PI locks) are not essential for the
> preempt-rt functionality and need some serious overhaul anyway.
> 
> The interested -rt observer might have noticed that we based our work
> on the 2.6.26.8-rt15 patch queue and did not pick the git-rt tree
> which is based on 2.6.28. The reason for this is that we wanted to pick
> the most stable patch queue and the git-rt tree has a lot of rewritten
> new code. Our work is not making the work which was done over the last
> months in the git-rt tree obsolete, quite the contrary: we want to
> provide a stable yet latest-kernel based foundation and integrate those
> changes gradually, as they become ready.
> 
> The further plan for the new -rt series is to merge it fully into git
> and integrate it into the -tip git tree so it gets the same treatment
> as all of our -tip based work: fully automated compile and boot
> testing. Furthermore an automated multi architecture -rt performance
> regression test based on the same infrastructure is currently being
> built.
> 
> The integration into the -tip tree also allows us to seperate out parts
> of -rt which are ready for mainline more easily and integrate them
> with our usual propagation to mainline.
> 
> The structure of the patches is likely to change over the next days
> when we tackle the git integration, but we appreciate your feedback in
> the form of comments, bugreports and patches.
> 


Hi!

I get some sleep while atomic warnings.
I've put the log and my config in attachment.



[-- Attachment #2: rtcrash --]
[-- Type: text/plain, Size: 125417 bytes --]

ents+0xd0/0xe0
[   44.220800]  [<ffffffff8024cd73>] __might_sleep+0x113/0x130
[   44.220808]  [<ffffffff8077c811>] rt_spin_lock+0xa1/0xb0
[   44.220815]  [<ffffffff80296a3d>] res_counter_charge+0x5d/0x130
[   44.220822]  [<ffffffff802fb67f>] __mem_cgroup_try_charge+0x7f/0x180
[   44.220829]  [<ffffffff802fc407>] mem_cgroup_charge_common+0x57/0x90
[   44.220836]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[   44.220842]  [<ffffffff802fc49d>] mem_cgroup_newpage_charge+0x5d/0x60
[   44.220850]  [<ffffffff802dba37>] handle_mm_fault+0x387/0x890
[   44.220856]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[   44.220864]  [<ffffffff8023495e>] do_page_fault+0x11e/0x2a0
[   44.220870]  [<ffffffff8077e5a5>] page_fault+0x25/0x30
[   44.220877]  [<ffffffff802c0a6b>] ? file_read_actor+0x4b/0x190
[   44.220883]  [<ffffffff802c0a41>] ? file_read_actor+0x21/0x190
[   44.220889]  [<ffffffff802c3031>] generic_file_aio_read+0x521/0x6c0
[   44.220896]  [<ffffffff802e0c36>] ? vma_adjust+0x106/0x520
[   44.220903]  [<ffffffff802ff040>] ? do_sync_read+0x0/0x140
[   44.220909]  [<ffffffff802ff139>] do_sync_read+0xf9/0x140
[   44.220915]  [<ffffffff802df709>] ? vm_stat_account+0x9/0x60
[   44.220922]  [<ffffffff8026f5f0>] ? autoremove_wake_function+0x0/0x40
[   44.220928]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[   44.220936]  [<ffffffff803cfc39>] ? cap_file_permission+0x9/0x10
[   44.220942]  [<ffffffff803cea36>] ? security_file_permission+0x16/0x20
[   44.220949]  [<ffffffff802ffe18>] vfs_read+0xc8/0x190
[   44.220955]  [<ffffffff802fffe5>] sys_read+0x55/0x90
[   44.220960]  [<ffffffff80212422>] system_call_fastpath+0x16/0x1b
[   45.228562] BUG: sleeping function called from invalid context at kernel/rtmutex.c:683
[   45.228571] in_atomic(): 0, irqs_disabled(): 1, pid: 4290, name: ntpdate
[   45.228576] INFO: lockdep is turned off.
[   45.228580] irq event stamp: 0
[   45.228583] hardirqs last  enabled at (0): [<(null)>] (null)
[   45.228589] hardirqs last disabled at (0): [<ffffffff8025449d>] copy_process+0x68d/0x1500
[   45.228602] softirqs last  enabled at (0): [<ffffffff8025449d>] copy_process+0x68d/0x1500
[   45.228609] softirqs last disabled at (0): [<(null)>] (null)
[   45.228617] Pid: 4290, comm: ntpdate Tainted: G        W  2.6.29-rc4-rt1-tip #1
[   45.228622] Call Trace:
[   45.228632]  [<ffffffff8027dfb0>] ? print_irqtrace_events+0xd0/0xe0
[   45.228639]  [<ffffffff8024cd73>] __might_sleep+0x113/0x130
[   45.228646]  [<ffffffff8077c811>] rt_spin_lock+0xa1/0xb0
[   45.228653]  [<ffffffff80296a3d>] res_counter_charge+0x5d/0x130
[   45.228660]  [<ffffffff802fb67f>] __mem_cgroup_try_charge+0x7f/0x180
[   45.228667]  [<ffffffff802fc407>] mem_cgroup_charge_common+0x57/0x90
[   45.228674]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[   45.228680]  [<ffffffff802fc49d>] mem_cgroup_newpage_charge+0x5d/0x60
[   45.228688]  [<ffffffff802d94ce>] __do_fault+0x29e/0x4c0
[   45.228694]  [<ffffffff8077c843>] ? rt_spin_unlock+0x23/0x80
[   45.228700]  [<ffffffff802db8b5>] handle_mm_fault+0x205/0x890
[   45.228707]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[   45.228714]  [<ffffffff8023495e>] do_page_fault+0x11e/0x2a0
[   45.228720]  [<ffffffff8077e5a5>] page_fault+0x25/0x30
[   45.228727]  [<ffffffff8043e1ed>] ? __clear_user+0x3d/0x70
[   45.228733]  [<ffffffff8043e1d1>] ? __clear_user+0x21/0x70
[   45.228738]  [<ffffffff8043e250>] clear_user+0x30/0x40
[   45.228746]  [<ffffffff80345d6c>] load_elf_binary+0x1cbc/0x1ef0
[   45.228752]  [<ffffffff8077c843>] ? rt_spin_unlock+0x23/0x80
[   45.228758]  [<ffffffff802da3ae>] ? follow_page+0x2ee/0x340
[   45.228764]  [<ffffffff802dc06c>] ? __get_user_pages+0x12c/0x4c0
[   45.228770]  [<ffffffff8077d63d>] ? __spin_unlock_irqrestore+0x6d/0x80
[   45.228777]  [<ffffffff8077d63d>] ? __spin_unlock_irqrestore+0x6d/0x80
[   45.228784]  [<ffffffff803440b0>] ? load_elf_binary+0x0/0x1ef0
[   45.228790]  [<ffffffff80304857>] search_binary_handler+0xc7/0x240
[   45.228796]  [<ffffffff80305eac>] do_execve+0x22c/0x2a0
[   45.228803]  [<ffffffff8021057e>] sys_execve+0x4e/0x80
[   45.228809]  [<ffffffff8021298a>] stub_execve+0x6a/0xc0
[   46.422994] BUG: sleeping function called from invalid context at kernel/rtmutex.c:683
[   46.423004] in_atomic(): 0, irqs_disabled(): 1, pid: 4301, name: gdmgreeter
[   46.423008] INFO: lockdep is turned off.
[   46.423012] irq event stamp: 0
[   46.423015] hardirqs last  enabled at (0): [<(null)>] (null)
[   46.423021] hardirqs last disabled at (0): [<ffffffff8025449d>] copy_process+0x68d/0x1500
[   46.423034] softirqs last  enabled at (0): [<ffffffff8025449d>] copy_process+0x68d/0x1500
[   46.423041] softirqs last disabled at (0): [<(null)>] (null)
[   46.423049] Pid: 4301, comm: gdmgreeter Tainted: G        W  2.6.29-rc4-rt1-tip #1
[   46.423054] Call Trace:
[   46.423063]  [<ffffffff8027dfb0>] ? print_irqtrace_events+0xd0/0xe0
[   46.423070]  [<ffffffff8024cd73>] __might_sleep+0x113/0x130
[   46.423077]  [<ffffffff8077c811>] rt_spin_lock+0xa1/0xb0
[   46.423084]  [<ffffffff80296a3d>] res_counter_charge+0x5d/0x130
[   46.423091]  [<ffffffff802fb67f>] __mem_cgroup_try_charge+0x7f/0x180
[   46.423098]  [<ffffffff802fc407>] mem_cgroup_charge_common+0x57/0x90
[   46.423105]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[   46.423111]  [<ffffffff802fc49d>] mem_cgroup_newpage_charge+0x5d/0x60
[   46.423119]  [<ffffffff802dba37>] handle_mm_fault+0x387/0x890
[   46.423125]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[   46.423132]  [<ffffffff8023495e>] do_page_fault+0x11e/0x2a0
[   46.423140]  [<ffffffff802cc9c7>] ? activate_page+0x147/0x1e0
[   46.423146]  [<ffffffff8077e5a5>] page_fault+0x25/0x30
[   46.423152]  [<ffffffff802cc9c7>] ? activate_page+0x147/0x1e0
[   46.423159]  [<ffffffff802c0a6b>] ? file_read_actor+0x4b/0x190
[   46.423165]  [<ffffffff802c0a41>] ? file_read_actor+0x21/0x190
[   46.423171]  [<ffffffff802c3031>] generic_file_aio_read+0x521/0x6c0
[   46.423178]  [<ffffffff802ff040>] ? do_sync_read+0x0/0x140
[   46.423184]  [<ffffffff802ff139>] do_sync_read+0xf9/0x140
[   46.423190]  [<ffffffff802df709>] ? vm_stat_account+0x9/0x60
[   46.423197]  [<ffffffff8026f5f0>] ? autoremove_wake_function+0x0/0x40
[   46.423203]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[   46.423211]  [<ffffffff803cfc39>] ? cap_file_permission+0x9/0x10
[   46.423218]  [<ffffffff803cea36>] ? security_file_permission+0x16/0x20
[   46.423224]  [<ffffffff802ffe18>] vfs_read+0xc8/0x190
[   46.423230]  [<ffffffff802fffe5>] sys_read+0x55/0x90
[   46.423236]  [<ffffffff80212422>] system_call_fastpath+0x16/0x1b
[   47.420101] BUG: sleeping function called from invalid context at kernel/rtmutex.c:683
[   47.420111] in_atomic(): 0, irqs_disabled(): 1, pid: 4301, name: gdmgreeter
[   47.420116] INFO: lockdep is turned off.
[   47.420120] irq event stamp: 0
[   47.420123] hardirqs last  enabled at (0): [<(null)>] (null)
[   47.420130] hardirqs last disabled at (0): [<ffffffff8025449d>] copy_process+0x68d/0x1500
[   47.420143] softirqs last  enabled at (0): [<ffffffff8025449d>] copy_process+0x68d/0x1500
[   47.420151] softirqs last disabled at (0): [<(null)>] (null)
[   47.420158] Pid: 4301, comm: gdmgreeter Tainted: G        W  2.6.29-rc4-rt1-tip #1
[   47.420163] Call Trace:
[   47.420173]  [<ffffffff8027dfb0>] ? print_irqtrace_events+0xd0/0xe0
[   47.420180]  [<ffffffff8024cd73>] __might_sleep+0x113/0x130
[   47.420188]  [<ffffffff8077c811>] rt_spin_lock+0xa1/0xb0
[   47.420194]  [<ffffffff80296a3d>] res_counter_charge+0x5d/0x130
[   47.420202]  [<ffffffff802fb67f>] __mem_cgroup_try_charge+0x7f/0x180
[   47.420208]  [<ffffffff802fc407>] mem_cgroup_charge_common+0x57/0x90
[   47.420217]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[   47.420222]  [<ffffffff802fc49d>] mem_cgroup_newpage_charge+0x5d/0x60
[   47.420230]  [<ffffffff802dba37>] handle_mm_fault+0x387/0x890
[   47.420237]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[   47.420244]  [<ffffffff8023495e>] do_page_fault+0x11e/0x2a0
[   47.420250]  [<ffffffff8077e5a5>] page_fault+0x25/0x30
[   49.011076] BUG: sleeping function called from invalid context at kernel/rtmutex.c:683
[   49.011085] in_atomic(): 0, irqs_disabled(): 1, pid: 4303, name: aplay
[   49.011090] INFO: lockdep is turned off.
[   49.011093] irq event stamp: 0
[   49.011097] hardirqs last  enabled at (0): [<(null)>] (null)
[   49.011103] hardirqs last disabled at (0): [<ffffffff8025449d>] copy_process+0x68d/0x1500
[   49.011115] softirqs last  enabled at (0): [<ffffffff8025449d>] copy_process+0x68d/0x1500
[   49.011122] softirqs last disabled at (0): [<(null)>] (null)
[   49.011130] Pid: 4303, comm: aplay Tainted: G        W  2.6.29-rc4-rt1-tip #1
[   49.011135] Call Trace:
[   49.011143]  [<ffffffff8027dfb0>] ? print_irqtrace_events+0xd0/0xe0
[   49.011150]  [<ffffffff8024cd73>] __might_sleep+0x113/0x130
[   49.011157]  [<ffffffff8077c811>] rt_spin_lock+0xa1/0xb0
[   49.011165]  [<ffffffff80296985>] res_counter_uncharge+0x45/0xa0
[   49.011172]  [<ffffffff802fc108>] __mem_cgroup_uncharge_common+0xa8/0x140
[   49.011179]  [<ffffffff802fc1f0>] mem_cgroup_uncharge_cache_page+0x10/0x20
[   49.011186]  [<ffffffff802c35d1>] __remove_from_page_cache+0x51/0x100
[   49.011192]  [<ffffffff802c36ac>] remove_from_page_cache+0x2c/0x40
[   49.011199]  [<ffffffff802cd378>] truncate_complete_page+0x48/0x80
[   49.011206]  [<ffffffff802cd50f>] truncate_inode_pages_range+0x15f/0x410
[   49.011213]  [<ffffffff802cd7d5>] truncate_inode_pages+0x15/0x20
[   49.011219]  [<ffffffff802d2795>] shmem_delete_inode+0x65/0xf0
[   49.011225]  [<ffffffff802d2730>] ? shmem_delete_inode+0x0/0xf0
[   49.011232]  [<ffffffff80315c4c>] generic_delete_inode+0x8c/0x120
[   49.011239]  [<ffffffff80314b72>] iput+0x62/0x70
[   49.011245]  [<ffffffff803112d0>] dentry_iput+0xa0/0xf0
[   49.011251]  [<ffffffff8031144b>] d_kill+0x5b/0x90
[   49.011257]  [<ffffffff8031393e>] dput+0xbe/0x1d0
[   49.011263]  [<ffffffff80300795>] __fput+0x165/0x1f0
[   49.011269]  [<ffffffff80300845>] fput+0x25/0x30
[   49.011275]  [<ffffffff803c35b1>] shm_destroy+0xa1/0xc0
[   49.011281]  [<ffffffff803c37d8>] do_shm_rmid+0x18/0x50
[   49.011286]  [<ffffffff803c41d2>] sys_shmctl+0x512/0x760
[   49.011294]  [<ffffffff8021245a>] ? sysret_check+0x2e/0x69
[   49.011300]  [<ffffffff80280ed9>] ? trace_hardirqs_on_caller+0x29/0x1f0
[   49.011307]  [<ffffffff8077c2c0>] ? trace_hardirqs_on_thunk+0x3a/0x3f
[   49.011313]  [<ffffffff80212422>] system_call_fastpath+0x16/0x1b
[   50.039040] BUG: sleeping function called from invalid context at kernel/rtmutex.c:683
[   50.039049] in_atomic(): 0, irqs_disabled(): 1, pid: 3552, name: syslogd
[   50.039053] INFO: lockdep is turned off.
[   50.039057] irq event stamp: 0
[   50.039060] hardirqs last  enabled at (0): [<(null)>] (null)
[   50.039066] hardirqs last disabled at (0): [<ffffffff8025449d>] copy_process+0x68d/0x1500
[   50.039078] softirqs last  enabled at (0): [<ffffffff8025449d>] copy_process+0x68d/0x1500
[   50.039086] softirqs last disabled at (0): [<(null)>] (null)
[   50.039093] Pid: 3552, comm: syslogd Tainted: G        W  2.6.29-rc4-rt1-tip #1
[   50.039098] Call Trace:
[   50.039107]  [<ffffffff8027dfb0>] ? print_irqtrace_events+0xd0/0xe0
[   50.039114]  [<ffffffff8024cd73>] __might_sleep+0x113/0x130
[   50.039121]  [<ffffffff8077c811>] rt_spin_lock+0xa1/0xb0
[   50.039128]  [<ffffffff80296a3d>] res_counter_charge+0x5d/0x130
[   50.039136]  [<ffffffff802fb67f>] __mem_cgroup_try_charge+0x7f/0x180
[   50.039143]  [<ffffffff802fc407>] mem_cgroup_charge_common+0x57/0x90
[   50.039151]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[   50.039157]  [<ffffffff802fc753>] mem_cgroup_cache_charge+0xe3/0x140
[   50.039164]  [<ffffffff802c1497>] add_to_page_cache_locked+0x47/0xf0
[   50.039170]  [<ffffffff802c1571>] add_to_page_cache_lru+0x31/0x90
[   50.039176]  [<ffffffff802c166c>] grab_cache_page_write_begin+0x9c/0xc0
[   50.039182]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[   50.039190]  [<ffffffff8036b742>] reiserfs_write_begin+0x72/0x210
[   50.039197]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[   50.039203]  [<ffffffff802c22a0>] generic_file_buffered_write+0x130/0x300
[   50.039210]  [<ffffffff802c291d>] __generic_file_aio_write_nolock+0x26d/0x460
[   50.039217]  [<ffffffff802c351c>] generic_file_aio_write+0x6c/0xd0
[   50.039224]  [<ffffffff802c34b0>] ? generic_file_aio_write+0x0/0xd0
[   50.039230]  [<ffffffff802feeb3>] do_sync_readv_writev+0xf3/0x140
[   50.039236]  [<ffffffff802f5da6>] ? __cache_free+0x16/0x280
[   50.039243]  [<ffffffff8026f5f0>] ? autoremove_wake_function+0x0/0x40
[   50.039252]  [<ffffffff803cfc39>] ? cap_file_permission+0x9/0x10
[   50.039259]  [<ffffffff803cea36>] ? security_file_permission+0x16/0x20
[   50.039265]  [<ffffffff802ff704>] do_readv_writev+0xd4/0x200
[   50.039271]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[   50.039277]  [<ffffffff802ff878>] vfs_writev+0x48/0x70
[   50.039283]  [<ffffffff802ff8f5>] sys_writev+0x55/0xc0
[   50.039289]  [<ffffffff80212422>] system_call_fastpath+0x16/0x1b
[   54.841672] BUG: sleeping function called from invalid context at kernel/rtmutex.c:683
[   54.842049] in_atomic(): 0, irqs_disabled(): 1, pid: 4238, name: nm-dispatcher.a
[   54.842404] INFO: lockdep is turned off.
[   54.842408] irq event stamp: 0
[   54.842412] hardirqs last  enabled at (0): [<(null)>] (null)
[   54.842418] hardirqs last disabled at (0): [<ffffffff8025449d>] copy_process+0x68d/0x1500
[   54.842430] softirqs last  enabled at (0): [<ffffffff8025449d>] copy_process+0x68d/0x1500
[   54.842438] softirqs last disabled at (0): [<(null)>] (null)
[   54.842446] Pid: 4238, comm: nm-dispatcher.a Tainted: G        W  2.6.29-rc4-rt1-tip #1
[   54.842451] Call Trace:
[   54.842460]  [<ffffffff8027dfb0>] ? print_irqtrace_events+0xd0/0xe0
[   54.842467]  [<ffffffff8024cd73>] __might_sleep+0x113/0x130
[   54.842474]  [<ffffffff8077c811>] rt_spin_lock+0xa1/0xb0
[   54.842481]  [<ffffffff80296a3d>] res_counter_charge+0x5d/0x130
[   54.842488]  [<ffffffff802fb67f>] __mem_cgroup_try_charge+0x7f/0x180
[   54.842494]  [<ffffffff802fc407>] mem_cgroup_charge_common+0x57/0x90
[   54.842502]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[   54.842508]  [<ffffffff802fc49d>] mem_cgroup_newpage_charge+0x5d/0x60
[   54.842516]  [<ffffffff802dba37>] handle_mm_fault+0x387/0x890
[   54.842522]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[   54.842529]  [<ffffffff8023495e>] do_page_fault+0x11e/0x2a0
[   54.842535]  [<ffffffff8077e5a5>] page_fault+0x25/0x30
[   57.756764] BUG: sleeping function called from invalid context at kernel/rtmutex.c:683
[   57.756773] in_atomic(): 0, irqs_disabled(): 1, pid: 4301, name: gdmgreeter
[   57.756778] INFO: lockdep is turned off.
[   57.756781] irq event stamp: 0
[   57.756785] hardirqs last  enabled at (0): [<(null)>] (null)
[   57.756791] hardirqs last disabled at (0): [<ffffffff8025449d>] copy_process+0x68d/0x1500
[   57.756803] softirqs last  enabled at (0): [<ffffffff8025449d>] copy_process+0x68d/0x1500
[   57.756810] softirqs last disabled at (0): [<(null)>] (null)
[   57.756818] Pid: 4301, comm: gdmgreeter Tainted: G        W  2.6.29-rc4-rt1-tip #1
[   57.756823] Call Trace:
[   57.756831]  [<ffffffff8027dfb0>] ? print_irqtrace_events+0xd0/0xe0
[   57.756838]  [<ffffffff8024cd73>] __might_sleep+0x113/0x130
[   57.756846]  [<ffffffff8077c811>] rt_spin_lock+0xa1/0xb0
[   57.756852]  [<ffffffff80296a3d>] res_counter_charge+0x5d/0x130
[   57.756860]  [<ffffffff802fb67f>] __mem_cgroup_try_charge+0x7f/0x180
[   57.756866]  [<ffffffff802fc407>] mem_cgroup_charge_common+0x57/0x90
[   57.756874]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[   57.756880]  [<ffffffff802fc49d>] mem_cgroup_newpage_charge+0x5d/0x60
[   57.756888]  [<ffffffff802dba37>] handle_mm_fault+0x387/0x890
[   57.756894]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[   57.756901]  [<ffffffff8023495e>] do_page_fault+0x11e/0x2a0
[   57.756907]  [<ffffffff8077e5a5>] page_fault+0x25/0x30
[   57.756914]  [<ffffffff802c0a6b>] ? file_read_actor+0x4b/0x190
[   57.756920]  [<ffffffff802c0a41>] ? file_read_actor+0x21/0x190
[   57.756926]  [<ffffffff802c3031>] generic_file_aio_read+0x521/0x6c0
[   57.756933]  [<ffffffff802ff040>] ? do_sync_read+0x0/0x140
[   57.756939]  [<ffffffff802ff139>] do_sync_read+0xf9/0x140
[   57.756945]  [<ffffffff802df709>] ? vm_stat_account+0x9/0x60
[   57.756952]  [<ffffffff8026f5f0>] ? autoremove_wake_function+0x0/0x40
[   57.756959]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[   57.756967]  [<ffffffff803cfc39>] ? cap_file_permission+0x9/0x10
[   57.756973]  [<ffffffff803cea36>] ? security_file_permission+0x16/0x20
[   57.756979]  [<ffffffff802ffe18>] vfs_read+0xc8/0x190
[   57.756985]  [<ffffffff802fffe5>] sys_read+0x55/0x90
[   57.756991]  [<ffffffff80212422>] system_call_fastpath+0x16/0x1b
[   59.167886] BUG: sleeping function called from invalid context at kernel/rtmutex.c:683
[   59.167896] in_atomic(): 0, irqs_disabled(): 1, pid: 4067, name: gdm
[   59.167900] INFO: lockdep is turned off.
[   59.167904] irq event stamp: 0
[   59.167907] hardirqs last  enabled at (0): [<(null)>] (null)
[   59.167913] hardirqs last disabled at (0): [<ffffffff8025449d>] copy_process+0x68d/0x1500
[   59.167925] softirqs last  enabled at (0): [<ffffffff8025449d>] copy_process+0x68d/0x1500
[   59.167932] softirqs last disabled at (0): [<(null)>] (null)
[   59.167939] Pid: 4067, comm: gdm Tainted: G        W  2.6.29-rc4-rt1-tip #1
[   59.167944] Call Trace:
[   59.167953]  [<ffffffff8027dfb0>] ? print_irqtrace_events+0xd0/0xe0
[   59.167960]  [<ffffffff8024cd73>] __might_sleep+0x113/0x130
[   59.167967]  [<ffffffff8077c811>] rt_spin_lock+0xa1/0xb0
[   59.167974]  [<ffffffff80296a3d>] res_counter_charge+0x5d/0x130
[   59.167982]  [<ffffffff802fb67f>] __mem_cgroup_try_charge+0x7f/0x180
[   59.167988]  [<ffffffff802fc407>] mem_cgroup_charge_common+0x57/0x90
[   59.167995]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[   59.168001]  [<ffffffff802fc753>] mem_cgroup_cache_charge+0xe3/0x140
[   59.168008]  [<ffffffff802c1497>] add_to_page_cache_locked+0x47/0xf0
[   59.168014]  [<ffffffff802c1571>] add_to_page_cache_lru+0x31/0x90
[   59.168022]  [<ffffffff8032f4dc>] mpage_readpages+0xbc/0x130
[   59.168028]  [<ffffffff8036dee0>] ? reiserfs_get_block+0x0/0x1210
[   59.168036]  [<ffffffff802c8e23>] ? __alloc_pages_internal+0xf3/0x510
[   59.168043]  [<ffffffff8036b8e0>] ? reiserfs_readpages+0x0/0x30
[   59.168049]  [<ffffffff8036b8ff>] reiserfs_readpages+0x1f/0x30
[   59.168056]  [<ffffffff802cb5f1>] __do_page_cache_readahead+0x181/0x260
[   59.168063]  [<ffffffff802cba73>] ondemand_readahead+0x193/0x210
[   59.168069]  [<ffffffff802cbbd5>] page_cache_sync_readahead+0x25/0x30
[   59.168075]  [<ffffffff802c2f64>] generic_file_aio_read+0x454/0x6c0
[   59.168082]  [<ffffffff802ff040>] ? do_sync_read+0x0/0x140
[   59.168087]  [<ffffffff802ff139>] do_sync_read+0xf9/0x140
[   59.168095]  [<ffffffff802df709>] ? vm_stat_account+0x9/0x60
[   59.168101]  [<ffffffff8026f5f0>] ? autoremove_wake_function+0x0/0x40
[   59.168107]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[   59.168115]  [<ffffffff803cfc39>] ? cap_file_permission+0x9/0x10
[   59.168121]  [<ffffffff803cea36>] ? security_file_permission+0x16/0x20
[   59.168128]  [<ffffffff802ffe18>] vfs_read+0xc8/0x190
[   59.168134]  [<ffffffff802fffe5>] sys_read+0x55/0x90
[   59.168140]  [<ffffffff80212422>] system_call_fastpath+0x16/0x1b
[   60.264296] BUG: sleeping function called from invalid context at kernel/rtmutex.c:683
[   60.264305] in_atomic(): 0, irqs_disabled(): 1, pid: 432, name: pdflush
[   60.264309] INFO: lockdep is turned off.
[   60.264313] irq event stamp: 0
[   60.264316] hardirqs last  enabled at (0): [<(null)>] (null)
[   60.264322] hardirqs last disabled at (0): [<ffffffff8025449d>] copy_process+0x68d/0x1500
[   60.264334] softirqs last  enabled at (0): [<ffffffff8025449d>] copy_process+0x68d/0x1500
[   60.264341] softirqs last disabled at (0): [<(null)>] (null)
[   60.264348] Pid: 432, comm: pdflush Tainted: G        W  2.6.29-rc4-rt1-tip #1
[   60.264353] Call Trace:
[   60.264362]  [<ffffffff8027dfb0>] ? print_irqtrace_events+0xd0/0xe0
[   60.264369]  [<ffffffff8024cd73>] __might_sleep+0x113/0x130
[   60.264376]  [<ffffffff8077c811>] rt_spin_lock+0xa1/0xb0
[   60.264383]  [<ffffffff80296a3d>] res_counter_charge+0x5d/0x130
[   60.264390]  [<ffffffff802fb67f>] __mem_cgroup_try_charge+0x7f/0x180
[   60.264397]  [<ffffffff802fc407>] mem_cgroup_charge_common+0x57/0x90
[   60.264404]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[   60.264410]  [<ffffffff802fc753>] mem_cgroup_cache_charge+0xe3/0x140
[   60.264417]  [<ffffffff802c1497>] add_to_page_cache_locked+0x47/0xf0
[   60.264423]  [<ffffffff802c1571>] add_to_page_cache_lru+0x31/0x90
[   60.264429]  [<ffffffff802c1eb9>] find_or_create_page+0x69/0xb0
[   60.264436]  [<ffffffff80325771>] __getblk+0x111/0x350
[   60.264443]  [<ffffffff803858af>] do_journal_end+0x54f/0x1110
[   60.264449]  [<ffffffff8077cbeb>] ? _mutex_unlock+0x2b/0x40
[   60.264455]  [<ffffffff80386934>] ? do_journal_begin_r+0x164/0x340
[   60.264461]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[   60.264467]  [<ffffffff803864e3>] journal_end_sync+0x73/0x90
[   60.264473]  [<ffffffff803758f0>] reiserfs_sync_fs+0x70/0x90
[   60.264479]  [<ffffffff80375923>] reiserfs_write_super+0x13/0x20
[   60.264486]  [<ffffffff80301284>] sync_supers+0x94/0xf0
[   60.264492]  [<ffffffff802ca367>] wb_kupdate+0x37/0x130
[   60.264498]  [<ffffffff802cb2b1>] pdflush+0x161/0x240
[   60.264504]  [<ffffffff802ca330>] ? wb_kupdate+0x0/0x130
[   60.264510]  [<ffffffff802810ad>] ? trace_hardirqs_on+0xd/0x10
[   60.264516]  [<ffffffff802cb150>] ? pdflush+0x0/0x240
[   60.264522]  [<ffffffff8026f0ee>] kthread+0x4e/0x90
[   60.264528]  [<ffffffff802135ba>] child_rip+0xa/0x20
[   60.264534]  [<ffffffff80250125>] ? schedule_tail+0x45/0xb0
[   60.264539]  [<ffffffff802810ad>] ? trace_hardirqs_on+0xd/0x10
[   60.264545]  [<ffffffff80212f54>] ? restore_args+0x0/0x30
[   60.264551]  [<ffffffff8026f0a0>] ? kthread+0x0/0x90
[   60.264556]  [<ffffffff802135b0>] ? child_rip+0x0/0x20
[   61.274005] BUG: sleeping function called from invalid context at kernel/rtmutex.c:683
[   61.274013] in_atomic(): 0, irqs_disabled(): 1, pid: 4384, name: cc1
[   61.274018] INFO: lockdep is turned off.
[   61.274021] irq event stamp: 0
[   61.274024] hardirqs last  enabled at (0): [<(null)>] (null)
[   61.274030] hardirqs last disabled at (0): [<ffffffff8025449d>] copy_process+0x68d/0x1500
[   61.274042] softirqs last  enabled at (0): [<ffffffff8025449d>] copy_process+0x68d/0x1500
[   61.274050] softirqs last disabled at (0): [<(null)>] (null)
[   61.274057] Pid: 4384, comm: cc1 Tainted: G        W  2.6.29-rc4-rt1-tip #1
[   61.274062] Call Trace:
[   61.274071]  [<ffffffff8027dfb0>] ? print_irqtrace_events+0xd0/0xe0
[   61.274078]  [<ffffffff8024cd73>] __might_sleep+0x113/0x130
[   61.274085]  [<ffffffff8077c811>] rt_spin_lock+0xa1/0xb0
[   61.274092]  [<ffffffff80296a3d>] res_counter_charge+0x5d/0x130
[   61.274100]  [<ffffffff802fb67f>] __mem_cgroup_try_charge+0x7f/0x180
[   61.274106]  [<ffffffff802fc407>] mem_cgroup_charge_common+0x57/0x90
[   61.274113]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[   61.274119]  [<ffffffff802fc753>] mem_cgroup_cache_charge+0xe3/0x140
[   61.274126]  [<ffffffff802c1497>] add_to_page_cache_locked+0x47/0xf0
[   61.274132]  [<ffffffff802c1571>] add_to_page_cache_lru+0x31/0x90
[   61.274140]  [<ffffffff8032f4dc>] mpage_readpages+0xbc/0x130
[   61.274146]  [<ffffffff8036dee0>] ? reiserfs_get_block+0x0/0x1210
[   61.274154]  [<ffffffff802c8e23>] ? __alloc_pages_internal+0xf3/0x510
[   61.274161]  [<ffffffff8036b8e0>] ? reiserfs_readpages+0x0/0x30
[   61.274167]  [<ffffffff8036b8ff>] reiserfs_readpages+0x1f/0x30
[   61.274174]  [<ffffffff802cb5f1>] __do_page_cache_readahead+0x181/0x260
[   61.274181]  [<ffffffff802cb736>] do_page_cache_readahead+0x66/0x90
[   61.274187]  [<ffffffff802c1be2>] filemap_fault+0x352/0x4f0
[   61.274194]  [<ffffffff802d9285>] __do_fault+0x55/0x4c0
[   61.274200]  [<ffffffff802db8b5>] handle_mm_fault+0x205/0x890
[   61.274206]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[   61.274213]  [<ffffffff8023495e>] do_page_fault+0x11e/0x2a0
[   61.274219]  [<ffffffff8077e5a5>] page_fault+0x25/0x30
[   62.285531] BUG: sleeping function called from invalid context at kernel/rtmutex.c:683
[   62.285540] in_atomic(): 0, irqs_disabled(): 1, pid: 4408, name: dbus-daemon
[   62.285545] INFO: lockdep is turned off.
[   62.285549] irq event stamp: 0
[   62.285552] hardirqs last  enabled at (0): [<(null)>] (null)
[   62.285558] hardirqs last disabled at (0): [<ffffffff8025449d>] copy_process+0x68d/0x1500
[   62.285570] softirqs last  enabled at (0): [<ffffffff8025449d>] copy_process+0x68d/0x1500
[   62.285578] softirqs last disabled at (0): [<(null)>] (null)
[   62.285585] Pid: 4408, comm: dbus-daemon Tainted: G        W  2.6.29-rc4-rt1-tip #1
[   62.285589] Call Trace:
[   62.285599]  [<ffffffff8027dfb0>] ? print_irqtrace_events+0xd0/0xe0
[   62.285605]  [<ffffffff8024cd73>] __might_sleep+0x113/0x130
[   62.285613]  [<ffffffff8077c811>] rt_spin_lock+0xa1/0xb0
[   62.285620]  [<ffffffff80296a3d>] res_counter_charge+0x5d/0x130
[   62.285627]  [<ffffffff802fb67f>] __mem_cgroup_try_charge+0x7f/0x180
[   62.285633]  [<ffffffff802fc407>] mem_cgroup_charge_common+0x57/0x90
[   62.285641]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[   62.285647]  [<ffffffff802fc753>] mem_cgroup_cache_charge+0xe3/0x140
[   62.285654]  [<ffffffff802c1497>] add_to_page_cache_locked+0x47/0xf0
[   62.285660]  [<ffffffff802c1571>] add_to_page_cache_lru+0x31/0x90
[   62.285667]  [<ffffffff8032f4dc>] mpage_readpages+0xbc/0x130
[   62.285674]  [<ffffffff8036dee0>] ? reiserfs_get_block+0x0/0x1210
[   62.285681]  [<ffffffff802c8e23>] ? __alloc_pages_internal+0xf3/0x510
[   62.285689]  [<ffffffff8036b8e0>] ? reiserfs_readpages+0x0/0x30
[   62.285695]  [<ffffffff8036b8ff>] reiserfs_readpages+0x1f/0x30
[   62.285702]  [<ffffffff802cb5f1>] __do_page_cache_readahead+0x181/0x260
[   62.285708]  [<ffffffff802cba73>] ondemand_readahead+0x193/0x210
[   62.285715]  [<ffffffff802cbbd5>] page_cache_sync_readahead+0x25/0x30
[   62.285721]  [<ffffffff802c2f64>] generic_file_aio_read+0x454/0x6c0
[   62.285728]  [<ffffffff802ff040>] ? do_sync_read+0x0/0x140
[   62.285733]  [<ffffffff802ff139>] do_sync_read+0xf9/0x140
[   62.285739]  [<ffffffff8077b9c9>] ? rt_mutex_unlock+0x9/0x40
[   62.285746]  [<ffffffff8026f5f0>] ? autoremove_wake_function+0x0/0x40
[   62.285753]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[   62.285758]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[   62.285766]  [<ffffffff803cfc39>] ? cap_file_permission+0x9/0x10
[   62.285772]  [<ffffffff803cea36>] ? security_file_permission+0x16/0x20
[   62.285779]  [<ffffffff802ffe18>] vfs_read+0xc8/0x190
[   62.285785]  [<ffffffff8030550f>] kernel_read+0x3f/0x60
[   62.285790]  [<ffffffff80305615>] prepare_binprm+0xe5/0x110
[   62.285796]  [<ffffffff80305e25>] do_execve+0x1a5/0x2a0
[   62.285802]  [<ffffffff8021057e>] sys_execve+0x4e/0x80
[   62.285808]  [<ffffffff8021298a>] stub_execve+0x6a/0xc0
[   63.288944] BUG: sleeping function called from invalid context at kernel/rtmutex.c:683
[   63.288953] in_atomic(): 0, irqs_disabled(): 1, pid: 4413, name: gvfsd
[   63.288958] INFO: lockdep is turned off.
[   63.288961] irq event stamp: 0
[   63.288965] hardirqs last  enabled at (0): [<(null)>] (null)
[   63.288971] hardirqs last disabled at (0): [<ffffffff8025449d>] copy_process+0x68d/0x1500
[   63.288982] softirqs last  enabled at (0): [<ffffffff8025449d>] copy_process+0x68d/0x1500
[   63.288990] softirqs last disabled at (0): [<(null)>] (null)
[   63.288997] Pid: 4413, comm: gvfsd Tainted: G        W  2.6.29-rc4-rt1-tip #1
[   63.289002] Call Trace:
[   63.289010]  [<ffffffff8027dfb0>] ? print_irqtrace_events+0xd0/0xe0
[   63.289017]  [<ffffffff8024cd73>] __might_sleep+0x113/0x130
[   63.289025]  [<ffffffff8077c811>] rt_spin_lock+0xa1/0xb0
[   63.289031]  [<ffffffff80296a3d>] res_counter_charge+0x5d/0x130
[   63.289039]  [<ffffffff802fb67f>] __mem_cgroup_try_charge+0x7f/0x180
[   63.289045]  [<ffffffff802fc407>] mem_cgroup_charge_common+0x57/0x90
[   63.289053]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[   63.289059]  [<ffffffff802fc753>] mem_cgroup_cache_charge+0xe3/0x140
[   63.289065]  [<ffffffff802c1497>] add_to_page_cache_locked+0x47/0xf0
[   63.289071]  [<ffffffff802c1571>] add_to_page_cache_lru+0x31/0x90
[   63.289079]  [<ffffffff8032f4dc>] mpage_readpages+0xbc/0x130
[   63.289085]  [<ffffffff8036dee0>] ? reiserfs_get_block+0x0/0x1210
[   63.289093]  [<ffffffff802c8e23>] ? __alloc_pages_internal+0xf3/0x510
[   63.289100]  [<ffffffff8036b8e0>] ? reiserfs_readpages+0x0/0x30
[   63.289106]  [<ffffffff8036b8ff>] reiserfs_readpages+0x1f/0x30
[   63.289113]  [<ffffffff802cb5f1>] __do_page_cache_readahead+0x181/0x260
[   63.289120]  [<ffffffff802cba73>] ondemand_readahead+0x193/0x210
[   63.289126]  [<ffffffff802cbbd5>] page_cache_sync_readahead+0x25/0x30
[   63.289132]  [<ffffffff802c2f64>] generic_file_aio_read+0x454/0x6c0
[   63.289138]  [<ffffffff802fcc60>] ? generic_file_open+0x0/0x40
[   63.289144]  [<ffffffff802ff040>] ? do_sync_read+0x0/0x140
[   63.289150]  [<ffffffff802ff139>] do_sync_read+0xf9/0x140
[   63.289157]  [<ffffffff8026f5f0>] ? autoremove_wake_function+0x0/0x40
[   63.289163]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[   63.289171]  [<ffffffff803cfc39>] ? cap_file_permission+0x9/0x10
[   63.289177]  [<ffffffff803cea36>] ? security_file_permission+0x16/0x20
[   63.289184]  [<ffffffff802ffe18>] vfs_read+0xc8/0x190
[   63.289189]  [<ffffffff802fffe5>] sys_read+0x55/0x90
[   63.289195]  [<ffffffff80212422>] system_call_fastpath+0x16/0x1b
[   64.339383] BUG: sleeping function called from invalid context at kernel/rtmutex.c:683
[   64.339392] in_atomic(): 0, irqs_disabled(): 1, pid: 4411, name: xfce-mcs-manage
[   64.339397] INFO: lockdep is turned off.
[   64.339401] irq event stamp: 0
[   64.339404] hardirqs last  enabled at (0): [<(null)>] (null)
[   64.339409] hardirqs last disabled at (0): [<ffffffff8025449d>] copy_process+0x68d/0x1500
[   64.339421] softirqs last  enabled at (0): [<ffffffff8025449d>] copy_process+0x68d/0x1500
[   64.339428] softirqs last disabled at (0): [<(null)>] (null)
[   64.339435] Pid: 4411, comm: xfce-mcs-manage Tainted: G        W  2.6.29-rc4-rt1-tip #1
[   64.339440] Call Trace:
[   64.339449]  [<ffffffff8027dfb0>] ? print_irqtrace_events+0xd0/0xe0
[   64.339456]  [<ffffffff8024cd73>] __might_sleep+0x113/0x130
[   64.339463]  [<ffffffff8077c811>] rt_spin_lock+0xa1/0xb0
[   64.339470]  [<ffffffff80296a3d>] res_counter_charge+0x5d/0x130
[   64.339477]  [<ffffffff802fb67f>] __mem_cgroup_try_charge+0x7f/0x180
[   64.339484]  [<ffffffff802fc407>] mem_cgroup_charge_common+0x57/0x90
[   64.339491]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[   64.339497]  [<ffffffff802fc753>] mem_cgroup_cache_charge+0xe3/0x140
[   64.339504]  [<ffffffff802c1497>] add_to_page_cache_locked+0x47/0xf0
[   64.339510]  [<ffffffff802c1571>] add_to_page_cache_lru+0x31/0x90
[   64.339517]  [<ffffffff8032f4dc>] mpage_readpages+0xbc/0x130
[   64.339524]  [<ffffffff8036dee0>] ? reiserfs_get_block+0x0/0x1210
[   64.339531]  [<ffffffff802c8e23>] ? __alloc_pages_internal+0xf3/0x510
[   64.339539]  [<ffffffff8036b8e0>] ? reiserfs_readpages+0x0/0x30
[   64.339545]  [<ffffffff8036b8ff>] reiserfs_readpages+0x1f/0x30
[   64.339551]  [<ffffffff802cb5f1>] __do_page_cache_readahead+0x181/0x260
[   64.339558]  [<ffffffff802cb736>] do_page_cache_readahead+0x66/0x90
[   64.339564]  [<ffffffff802c1be2>] filemap_fault+0x352/0x4f0
[   64.339571]  [<ffffffff802d9285>] __do_fault+0x55/0x4c0
[   64.339577]  [<ffffffff802db8b5>] handle_mm_fault+0x205/0x890
[   64.339583]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[   64.339590]  [<ffffffff8023495e>] do_page_fault+0x11e/0x2a0
[   64.339596]  [<ffffffff8077e5a5>] page_fault+0x25/0x30
[   65.336753] BUG: sleeping function called from invalid context at kernel/rtmutex.c:683
[   65.336762] in_atomic(): 0, irqs_disabled(): 1, pid: 4424, name: gam_server
[   65.336767] INFO: lockdep is turned off.
[   65.336770] irq event stamp: 0
[   65.336773] hardirqs last  enabled at (0): [<(null)>] (null)
[   65.336779] hardirqs last disabled at (0): [<ffffffff8025449d>] copy_process+0x68d/0x1500
[   65.336791] softirqs last  enabled at (0): [<ffffffff8025449d>] copy_process+0x68d/0x1500
[   65.336799] softirqs last disabled at (0): [<(null)>] (null)
[   65.336806] Pid: 4424, comm: gam_server Tainted: G        W  2.6.29-rc4-rt1-tip #1
[   65.336811] Call Trace:
[   65.336821]  [<ffffffff8027dfb0>] ? print_irqtrace_events+0xd0/0xe0
[   65.336827]  [<ffffffff8024cd73>] __might_sleep+0x113/0x130
[   65.336834]  [<ffffffff8077c811>] rt_spin_lock+0xa1/0xb0
[   65.336841]  [<ffffffff80296a3d>] res_counter_charge+0x5d/0x130
[   65.336848]  [<ffffffff802fb67f>] __mem_cgroup_try_charge+0x7f/0x180
[   65.336854]  [<ffffffff802fc407>] mem_cgroup_charge_common+0x57/0x90
[   65.336862]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[   65.336868]  [<ffffffff802fc49d>] mem_cgroup_newpage_charge+0x5d/0x60
[   65.336876]  [<ffffffff802d94ce>] __do_fault+0x29e/0x4c0
[   65.336881]  [<ffffffff8077c843>] ? rt_spin_unlock+0x23/0x80
[   65.336888]  [<ffffffff802db8b5>] handle_mm_fault+0x205/0x890
[   65.336894]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[   65.336901]  [<ffffffff8023495e>] do_page_fault+0x11e/0x2a0
[   65.336907]  [<ffffffff8077e5a5>] page_fault+0x25/0x30
[   65.336914]  [<ffffffff8043e1ed>] ? __clear_user+0x3d/0x70
[   65.336919]  [<ffffffff8043e1d1>] ? __clear_user+0x21/0x70
[   65.336924]  [<ffffffff8043e250>] clear_user+0x30/0x40
[   65.336932]  [<ffffffff80345d6c>] load_elf_binary+0x1cbc/0x1ef0
[   65.336938]  [<ffffffff8077c843>] ? rt_spin_unlock+0x23/0x80
[   65.336944]  [<ffffffff802da3ae>] ? follow_page+0x2ee/0x340
[   65.336950]  [<ffffffff802dc06c>] ? __get_user_pages+0x12c/0x4c0
[   65.336956]  [<ffffffff8077d63d>] ? __spin_unlock_irqrestore+0x6d/0x80
[   65.336962]  [<ffffffff8077d63d>] ? __spin_unlock_irqrestore+0x6d/0x80
[   65.336969]  [<ffffffff803440b0>] ? load_elf_binary+0x0/0x1ef0
[   65.336976]  [<ffffffff80304857>] search_binary_handler+0xc7/0x240
[   65.336981]  [<ffffffff80305eac>] do_execve+0x22c/0x2a0
[   65.336988]  [<ffffffff8021057e>] sys_execve+0x4e/0x80
[   65.336994]  [<ffffffff8021298a>] stub_execve+0x6a/0xc0
[   66.374844] BUG: sleeping function called from invalid context at kernel/rtmutex.c:683
[   66.374853] in_atomic(): 0, irqs_disabled(): 1, pid: 4425, name: xfdesktop
[   66.374858] INFO: lockdep is turned off.
[   66.374862] irq event stamp: 0
[   66.374865] hardirqs last  enabled at (0): [<(null)>] (null)
[   66.374871] hardirqs last disabled at (0): [<ffffffff8025449d>] copy_process+0x68d/0x1500
[   66.374883] softirqs last  enabled at (0): [<ffffffff8025449d>] copy_process+0x68d/0x1500
[   66.374891] softirqs last disabled at (0): [<(null)>] (null)
[   66.374898] Pid: 4425, comm: xfdesktop Tainted: G        W  2.6.29-rc4-rt1-tip #1
[   66.374903] Call Trace:
[   66.374912]  [<ffffffff8027dfb0>] ? print_irqtrace_events+0xd0/0xe0
[   66.374918]  [<ffffffff8024cd73>] __might_sleep+0x113/0x130
[   66.374926]  [<ffffffff8077c811>] rt_spin_lock+0xa1/0xb0
[   66.374933]  [<ffffffff80296a3d>] res_counter_charge+0x5d/0x130
[   66.374940]  [<ffffffff802fb67f>] __mem_cgroup_try_charge+0x7f/0x180
[   66.374946]  [<ffffffff802fc407>] mem_cgroup_charge_common+0x57/0x90
[   66.374954]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[   66.374960]  [<ffffffff802fc753>] mem_cgroup_cache_charge+0xe3/0x140
[   66.374967]  [<ffffffff802c1497>] add_to_page_cache_locked+0x47/0xf0
[   66.374973]  [<ffffffff802c1571>] add_to_page_cache_lru+0x31/0x90
[   66.374980]  [<ffffffff8032f4dc>] mpage_readpages+0xbc/0x130
[   66.374987]  [<ffffffff8036dee0>] ? reiserfs_get_block+0x0/0x1210
[   66.374994]  [<ffffffff802c8e23>] ? __alloc_pages_internal+0xf3/0x510
[   66.375002]  [<ffffffff8036b8e0>] ? reiserfs_readpages+0x0/0x30
[   66.375008]  [<ffffffff8036b8ff>] reiserfs_readpages+0x1f/0x30
[   66.375015]  [<ffffffff802cb5f1>] __do_page_cache_readahead+0x181/0x260
[   66.375021]  [<ffffffff802cb736>] do_page_cache_readahead+0x66/0x90
[   66.375027]  [<ffffffff802c1be2>] filemap_fault+0x352/0x4f0
[   66.375034]  [<ffffffff804383f7>] ? prio_tree_insert+0x247/0x2d0
[   66.375042]  [<ffffffff802d9285>] __do_fault+0x55/0x4c0
[   66.375047]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[   66.375054]  [<ffffffff802db8b5>] handle_mm_fault+0x205/0x890
[   66.375060]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[   66.375067]  [<ffffffff8023495e>] do_page_fault+0x11e/0x2a0
[   66.375073]  [<ffffffff8077e5a5>] page_fault+0x25/0x30
[   67.374088] BUG: sleeping function called from invalid context at kernel/rtmutex.c:683
[   67.374097] in_atomic(): 0, irqs_disabled(): 1, pid: 4425, name: xfdesktop
[   67.374102] INFO: lockdep is turned off.
[   67.374105] irq event stamp: 0
[   67.374108] hardirqs last  enabled at (0): [<(null)>] (null)
[   67.374114] hardirqs last disabled at (0): [<ffffffff8025449d>] copy_process+0x68d/0x1500
[   67.374126] softirqs last  enabled at (0): [<ffffffff8025449d>] copy_process+0x68d/0x1500
[   67.374133] softirqs last disabled at (0): [<(null)>] (null)
[   67.374140] Pid: 4425, comm: xfdesktop Tainted: G        W  2.6.29-rc4-rt1-tip #1
[   67.374145] Call Trace:
[   67.374154]  [<ffffffff8027dfb0>] ? print_irqtrace_events+0xd0/0xe0
[   67.374161]  [<ffffffff8024cd73>] __might_sleep+0x113/0x130
[   67.374168]  [<ffffffff8077c811>] rt_spin_lock+0xa1/0xb0
[   67.374175]  [<ffffffff80296a3d>] res_counter_charge+0x5d/0x130
[   67.374182]  [<ffffffff802fb67f>] __mem_cgroup_try_charge+0x7f/0x180
[   67.374188]  [<ffffffff802fc407>] mem_cgroup_charge_common+0x57/0x90
[   67.374196]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[   67.374201]  [<ffffffff802fc49d>] mem_cgroup_newpage_charge+0x5d/0x60
[   67.374209]  [<ffffffff802dba37>] handle_mm_fault+0x387/0x890
[   67.374215]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[   67.374222]  [<ffffffff8023495e>] do_page_fault+0x11e/0x2a0
[   67.374228]  [<ffffffff8077e5a5>] page_fault+0x25/0x30
[   67.374234]  [<ffffffff802c0a6b>] ? file_read_actor+0x4b/0x190
[   67.374240]  [<ffffffff802c0a41>] ? file_read_actor+0x21/0x190
[   67.374246]  [<ffffffff802c3031>] generic_file_aio_read+0x521/0x6c0
[   67.374253]  [<ffffffff802ff040>] ? do_sync_read+0x0/0x140
[   67.374259]  [<ffffffff802ff139>] do_sync_read+0xf9/0x140
[   67.374265]  [<ffffffff802df709>] ? vm_stat_account+0x9/0x60
[   67.374272]  [<ffffffff8026f5f0>] ? autoremove_wake_function+0x0/0x40
[   67.374278]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[   67.374286]  [<ffffffff803cfc39>] ? cap_file_permission+0x9/0x10
[   67.374292]  [<ffffffff803cea36>] ? security_file_permission+0x16/0x20
[   67.374298]  [<ffffffff802ffe18>] vfs_read+0xc8/0x190
[   67.374304]  [<ffffffff802fffe5>] sys_read+0x55/0x90
[   67.374310]  [<ffffffff80212422>] system_call_fastpath+0x16/0x1b
[   68.378367] BUG: sleeping function called from invalid context at kernel/rtmutex.c:683
[   68.378376] in_atomic(): 0, irqs_disabled(): 1, pid: 4438, name: xfce4-panel
[   68.378381] INFO: lockdep is turned off.
[   68.378385] irq event stamp: 0
[   68.378388] hardirqs last  enabled at (0): [<(null)>] (null)
[   68.378394] hardirqs last disabled at (0): [<ffffffff8025449d>] copy_process+0x68d/0x1500
[   68.378406] softirqs last  enabled at (0): [<ffffffff8025449d>] copy_process+0x68d/0x1500
[   68.378413] softirqs last disabled at (0): [<(null)>] (null)
[   68.378420] Pid: 4438, comm: xfce4-panel Tainted: G        W  2.6.29-rc4-rt1-tip #1
[   68.378425] Call Trace:
[   68.378434]  [<ffffffff8027dfb0>] ? print_irqtrace_events+0xd0/0xe0
[   68.378440]  [<ffffffff8024cd73>] __might_sleep+0x113/0x130
[   68.378448]  [<ffffffff8077c811>] rt_spin_lock+0xa1/0xb0
[   68.378454]  [<ffffffff80296a3d>] res_counter_charge+0x5d/0x130
[   68.378462]  [<ffffffff802fb67f>] __mem_cgroup_try_charge+0x7f/0x180
[   68.378468]  [<ffffffff802fc407>] mem_cgroup_charge_common+0x57/0x90
[   68.378475]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[   68.378481]  [<ffffffff802fc753>] mem_cgroup_cache_charge+0xe3/0x140
[   68.378488]  [<ffffffff802c1497>] add_to_page_cache_locked+0x47/0xf0
[   68.378494]  [<ffffffff802c1571>] add_to_page_cache_lru+0x31/0x90
[   68.378502]  [<ffffffff8032f4dc>] mpage_readpages+0xbc/0x130
[   68.378508]  [<ffffffff8036dee0>] ? reiserfs_get_block+0x0/0x1210
[   68.378516]  [<ffffffff802c8e23>] ? __alloc_pages_internal+0xf3/0x510
[   68.378523]  [<ffffffff8036b8e0>] ? reiserfs_readpages+0x0/0x30
[   68.378529]  [<ffffffff8036b8ff>] reiserfs_readpages+0x1f/0x30
[   68.378536]  [<ffffffff802cb5f1>] __do_page_cache_readahead+0x181/0x260
[   68.378543]  [<ffffffff802cba73>] ondemand_readahead+0x193/0x210
[   68.378549]  [<ffffffff802cbbd5>] page_cache_sync_readahead+0x25/0x30
[   68.378555]  [<ffffffff802c2f64>] generic_file_aio_read+0x454/0x6c0
[   68.378562]  [<ffffffff802ff040>] ? do_sync_read+0x0/0x140
[   68.378568]  [<ffffffff802ff139>] do_sync_read+0xf9/0x140
[   68.378574]  [<ffffffff802df709>] ? vm_stat_account+0x9/0x60
[   68.378581]  [<ffffffff8026f5f0>] ? autoremove_wake_function+0x0/0x40
[   68.378587]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[   68.378595]  [<ffffffff803cfc39>] ? cap_file_permission+0x9/0x10
[   68.378602]  [<ffffffff803cea36>] ? security_file_permission+0x16/0x20
[   68.378608]  [<ffffffff802ffe18>] vfs_read+0xc8/0x190
[   68.378614]  [<ffffffff802fffe5>] sys_read+0x55/0x90
[   68.378619]  [<ffffffff80212422>] system_call_fastpath+0x16/0x1b
[   69.377249] BUG: sleeping function called from invalid context at kernel/rtmutex.c:683
[   69.377258] in_atomic(): 0, irqs_disabled(): 1, pid: 4441, name: firefox
[   69.377263] INFO: lockdep is turned off.
[   69.377267] irq event stamp: 0
[   69.377270] hardirqs last  enabled at (0): [<(null)>] (null)
[   69.377276] hardirqs last disabled at (0): [<ffffffff8025449d>] copy_process+0x68d/0x1500
[   69.377288] softirqs last  enabled at (0): [<ffffffff8025449d>] copy_process+0x68d/0x1500
[   69.377296] softirqs last disabled at (0): [<(null)>] (null)
[   69.377303] Pid: 4441, comm: firefox Tainted: G        W  2.6.29-rc4-rt1-tip #1
[   69.377308] Call Trace:
[   69.377317]  [<ffffffff8027dfb0>] ? print_irqtrace_events+0xd0/0xe0
[   69.377324]  [<ffffffff8024cd73>] __might_sleep+0x113/0x130
[   69.377331]  [<ffffffff8077c811>] rt_spin_lock+0xa1/0xb0
[   69.377338]  [<ffffffff80296a3d>] res_counter_charge+0x5d/0x130
[   69.377345]  [<ffffffff802fb67f>] __mem_cgroup_try_charge+0x7f/0x180
[   69.377352]  [<ffffffff802fc407>] mem_cgroup_charge_common+0x57/0x90
[   69.377359]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[   69.377365]  [<ffffffff802fc753>] mem_cgroup_cache_charge+0xe3/0x140
[   69.377372]  [<ffffffff802c1497>] add_to_page_cache_locked+0x47/0xf0
[   69.377378]  [<ffffffff802c1571>] add_to_page_cache_lru+0x31/0x90
[   69.377385]  [<ffffffff8032f4dc>] mpage_readpages+0xbc/0x130
[   69.377392]  [<ffffffff8036dee0>] ? reiserfs_get_block+0x0/0x1210
[   69.377399]  [<ffffffff802c8e23>] ? __alloc_pages_internal+0xf3/0x510
[   69.377407]  [<ffffffff8036b8e0>] ? reiserfs_readpages+0x0/0x30
[   69.377413]  [<ffffffff8036b8ff>] reiserfs_readpages+0x1f/0x30
[   69.377420]  [<ffffffff802cb5f1>] __do_page_cache_readahead+0x181/0x260
[   69.377426]  [<ffffffff802cb736>] do_page_cache_readahead+0x66/0x90
[   69.377432]  [<ffffffff802c1be2>] filemap_fault+0x352/0x4f0
[   69.377439]  [<ffffffff802d9285>] __do_fault+0x55/0x4c0
[   69.377445]  [<ffffffff802db8b5>] handle_mm_fault+0x205/0x890
[   69.377452]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[   69.377458]  [<ffffffff8023495e>] do_page_fault+0x11e/0x2a0
[   69.377465]  [<ffffffff8077e5a5>] page_fault+0x25/0x30
[   70.376254] BUG: sleeping function called from invalid context at kernel/rtmutex.c:683
[   70.376263] in_atomic(): 0, irqs_disabled(): 1, pid: 4445, name: xfce4-places-pl
[   70.376268] INFO: lockdep is turned off.
[   70.376272] irq event stamp: 0
[   70.376275] hardirqs last  enabled at (0): [<(null)>] (null)
[   70.376281] hardirqs last disabled at (0): [<ffffffff8025449d>] copy_process+0x68d/0x1500
[   70.376293] softirqs last  enabled at (0): [<ffffffff8025449d>] copy_process+0x68d/0x1500
[   70.376300] softirqs last disabled at (0): [<(null)>] (null)
[   70.376307] Pid: 4445, comm: xfce4-places-pl Tainted: G        W  2.6.29-rc4-rt1-tip #1
[   70.376312] Call Trace:
[   70.376321]  [<ffffffff8027dfb0>] ? print_irqtrace_events+0xd0/0xe0
[   70.376328]  [<ffffffff8024cd73>] __might_sleep+0x113/0x130
[   70.376335]  [<ffffffff8077c811>] rt_spin_lock+0xa1/0xb0
[   70.376342]  [<ffffffff80296a3d>] res_counter_charge+0x5d/0x130
[   70.376349]  [<ffffffff802fb67f>] __mem_cgroup_try_charge+0x7f/0x180
[   70.376356]  [<ffffffff802fc407>] mem_cgroup_charge_common+0x57/0x90
[   70.376364]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[   70.376369]  [<ffffffff802fc49d>] mem_cgroup_newpage_charge+0x5d/0x60
[   70.376377]  [<ffffffff802dba37>] handle_mm_fault+0x387/0x890
[   70.376383]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[   70.376390]  [<ffffffff8023495e>] do_page_fault+0x11e/0x2a0
[   70.376396]  [<ffffffff8077e5a5>] page_fault+0x25/0x30
[   71.386946] BUG: sleeping function called from invalid context at kernel/rtmutex.c:683
[   71.386955] in_atomic(): 0, irqs_disabled(): 1, pid: 4499, name: python
[   71.386960] INFO: lockdep is turned off.
[   71.386965] irq event stamp: 0
[   71.386968] hardirqs last  enabled at (0): [<(null)>] (null)
[   71.386975] hardirqs last disabled at (0): [<ffffffff8025449d>] copy_process+0x68d/0x1500
[   71.386987] softirqs last  enabled at (0): [<ffffffff8025449d>] copy_process+0x68d/0x1500
[   71.386995] softirqs last disabled at (0): [<(null)>] (null)
[   71.387003] Pid: 4499, comm: python Tainted: G        W  2.6.29-rc4-rt1-tip #1
[   71.387008] Call Trace:
[   71.387017]  [<ffffffff8027dfb0>] ? print_irqtrace_events+0xd0/0xe0
[   71.387024]  [<ffffffff8024cd73>] __might_sleep+0x113/0x130
[   71.387031]  [<ffffffff8077c811>] rt_spin_lock+0xa1/0xb0
[   71.387038]  [<ffffffff80296a3d>] res_counter_charge+0x5d/0x130
[   71.387045]  [<ffffffff802fb67f>] __mem_cgroup_try_charge+0x7f/0x180
[   71.387051]  [<ffffffff802fc407>] mem_cgroup_charge_common+0x57/0x90
[   71.387058]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[   71.387064]  [<ffffffff802fc49d>] mem_cgroup_newpage_charge+0x5d/0x60
[   71.387072]  [<ffffffff802d9d03>] do_wp_page+0x323/0x6e0
[   71.387078]  [<ffffffff802dbca6>] handle_mm_fault+0x5f6/0x890
[   71.387084]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[   71.387091]  [<ffffffff8023495e>] do_page_fault+0x11e/0x2a0
[   71.387097]  [<ffffffff8077e5a5>] page_fault+0x25/0x30
[   72.402564] BUG: sleeping function called from invalid context at kernel/rtmutex.c:683
[   72.402572] in_atomic(): 0, irqs_disabled(): 1, pid: 4503, name: nm-applet
[   72.402577] INFO: lockdep is turned off.
[   72.402581] irq event stamp: 0
[   72.402584] hardirqs last  enabled at (0): [<(null)>] (null)
[   72.402590] hardirqs last disabled at (0): [<ffffffff8025449d>] copy_process+0x68d/0x1500
[   72.402602] softirqs last  enabled at (0): [<ffffffff8025449d>] copy_process+0x68d/0x1500
[   72.402609] softirqs last disabled at (0): [<(null)>] (null)
[   72.402616] Pid: 4503, comm: nm-applet Tainted: G        W  2.6.29-rc4-rt1-tip #1
[   72.402621] Call Trace:
[   72.402630]  [<ffffffff8027dfb0>] ? print_irqtrace_events+0xd0/0xe0
[   72.402637]  [<ffffffff8024cd73>] __might_sleep+0x113/0x130
[   72.402645]  [<ffffffff8077c811>] rt_spin_lock+0xa1/0xb0
[   72.402651]  [<ffffffff80296a3d>] res_counter_charge+0x5d/0x130
[   72.402659]  [<ffffffff802fb67f>] __mem_cgroup_try_charge+0x7f/0x180
[   72.402665]  [<ffffffff802fc407>] mem_cgroup_charge_common+0x57/0x90
[   72.402672]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[   72.402678]  [<ffffffff802fc49d>] mem_cgroup_newpage_charge+0x5d/0x60
[   72.402686]  [<ffffffff802dba37>] handle_mm_fault+0x387/0x890
[   72.402692]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[   72.402699]  [<ffffffff8023495e>] do_page_fault+0x11e/0x2a0
[   72.402705]  [<ffffffff8077e5a5>] page_fault+0x25/0x30
[   73.400318] BUG: sleeping function called from invalid context at kernel/rtmutex.c:683
[   73.400327] in_atomic(): 0, irqs_disabled(): 1, pid: 4510, name: xfce4-terminal
[   73.400332] INFO: lockdep is turned off.
[   73.400335] irq event stamp: 0
[   73.400338] hardirqs last  enabled at (0): [<(null)>] (null)
[   73.400344] hardirqs last disabled at (0): [<ffffffff8025449d>] copy_process+0x68d/0x1500
[   73.400357] softirqs last  enabled at (0): [<ffffffff8025449d>] copy_process+0x68d/0x1500
[   73.400365] softirqs last disabled at (0): [<(null)>] (null)
[   73.400372] Pid: 4510, comm: xfce4-terminal Tainted: G        W  2.6.29-rc4-rt1-tip #1
[   73.400377] Call Trace:
[   73.400387]  [<ffffffff8027dfb0>] ? print_irqtrace_events+0xd0/0xe0
[   73.400393]  [<ffffffff8024cd73>] __might_sleep+0x113/0x130
[   73.400401]  [<ffffffff8077c811>] rt_spin_lock+0xa1/0xb0
[   73.400408]  [<ffffffff80296a3d>] res_counter_charge+0x5d/0x130
[   73.400416]  [<ffffffff802fb67f>] __mem_cgroup_try_charge+0x7f/0x180
[   73.400422]  [<ffffffff802fc407>] mem_cgroup_charge_common+0x57/0x90
[   73.400430]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[   73.400436]  [<ffffffff802fc49d>] mem_cgroup_newpage_charge+0x5d/0x60
[   73.400443]  [<ffffffff802dba37>] handle_mm_fault+0x387/0x890
[   73.400450]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[   73.400457]  [<ffffffff8023495e>] do_page_fault+0x11e/0x2a0
[   73.400463]  [<ffffffff8077e5a5>] page_fault+0x25/0x30
[   74.400744] BUG: sleeping function called from invalid context at kernel/rtmutex.c:683
[   74.400753] in_atomic(): 0, irqs_disabled(): 1, pid: 4499, name: python
[   74.400758] INFO: lockdep is turned off.
[   74.400762] irq event stamp: 0
[   74.400765] hardirqs last  enabled at (0): [<(null)>] (null)
[   74.400771] hardirqs last disabled at (0): [<ffffffff8025449d>] copy_process+0x68d/0x1500
[   74.400783] softirqs last  enabled at (0): [<ffffffff8025449d>] copy_process+0x68d/0x1500
[   74.400790] softirqs last disabled at (0): [<(null)>] (null)
[   74.400797] Pid: 4499, comm: python Tainted: G        W  2.6.29-rc4-rt1-tip #1
[   74.400802] Call Trace:
[   74.400811]  [<ffffffff8027dfb0>] ? print_irqtrace_events+0xd0/0xe0
[   74.400818]  [<ffffffff8024cd73>] __might_sleep+0x113/0x130
[   74.400825]  [<ffffffff8077c811>] rt_spin_lock+0xa1/0xb0
[   74.400832]  [<ffffffff80296a3d>] res_counter_charge+0x5d/0x130
[   74.400839]  [<ffffffff802fb67f>] __mem_cgroup_try_charge+0x7f/0x180
[   74.400846]  [<ffffffff802fc407>] mem_cgroup_charge_common+0x57/0x90
[   74.400853]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[   74.400859]  [<ffffffff802fc753>] mem_cgroup_cache_charge+0xe3/0x140
[   74.400866]  [<ffffffff802c1497>] add_to_page_cache_locked+0x47/0xf0
[   74.400872]  [<ffffffff802c1571>] add_to_page_cache_lru+0x31/0x90
[   74.400878]  [<ffffffff802c1eb9>] find_or_create_page+0x69/0xb0
[   74.400884]  [<ffffffff80325771>] __getblk+0x111/0x350
[   74.400892]  [<ffffffff8037e1e9>] search_by_key+0x89/0xf70
[   74.400898]  [<ffffffff802f7da5>] ? cache_alloc_refill+0x95/0x2b0
[   74.400905]  [<ffffffff80445048>] ? __raw_spin_lock_init+0x38/0x70
[   74.400913]  [<ffffffff8036c43e>] reiserfs_read_locked_inode+0x7e/0x5f0
[   74.400920]  [<ffffffff8036a8d0>] ? reiserfs_init_locked_inode+0x0/0x20
[   74.400927]  [<ffffffff8036ca5d>] reiserfs_iget+0xad/0xd0
[   74.400932]  [<ffffffff8037e0d0>] ? pathrelse+0x40/0x60
[   74.400938]  [<ffffffff80368c25>] reiserfs_lookup+0x105/0x180
[   74.400944]  [<ffffffff8077c803>] ? rt_spin_lock+0x93/0xb0
[   74.400951]  [<ffffffff803085c6>] do_lookup+0x206/0x260
[   74.400957]  [<ffffffff8030a8fb>] __link_path_walk+0x78b/0x1030
[   74.400963]  [<ffffffff8030b3ee>] path_walk+0x6e/0xe0
[   74.400969]  [<ffffffff8030b5d6>] do_path_lookup+0xb6/0x230
[   74.400974]  [<ffffffff8030a106>] ? getname+0x1c6/0x230
[   74.400980]  [<ffffffff8030c50b>] user_path_at+0x7b/0xb0
[   74.400986]  [<ffffffff803031e8>] ? cp_new_stat+0xe8/0x100
[   74.400992]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[   74.400998]  [<ffffffff8030360d>] vfs_stat_fd+0x2d/0x60
[   74.401004]  [<ffffffff803036ec>] sys_newstat+0x2c/0x50
[   74.401010]  [<ffffffff80280ed9>] ? trace_hardirqs_on_caller+0x29/0x1f0
[   74.401016]  [<ffffffff8077c2c0>] ? trace_hardirqs_on_thunk+0x3a/0x3f
[   74.401022]  [<ffffffff80212422>] system_call_fastpath+0x16/0x1b
[   75.400153] BUG: sleeping function called from invalid context at kernel/rtmutex.c:683
[   75.400162] in_atomic(): 0, irqs_disabled(): 1, pid: 4514, name: geany
[   75.400167] INFO: lockdep is turned off.
[   75.400171] irq event stamp: 0
[   75.400174] hardirqs last  enabled at (0): [<(null)>] (null)
[   75.400180] hardirqs last disabled at (0): [<ffffffff8025449d>] copy_process+0x68d/0x1500
[   75.400192] softirqs last  enabled at (0): [<ffffffff8025449d>] copy_process+0x68d/0x1500
[   75.400199] softirqs last disabled at (0): [<(null)>] (null)
[   75.400206] Pid: 4514, comm: geany Tainted: G        W  2.6.29-rc4-rt1-tip #1
[   75.400211] Call Trace:
[   75.400221]  [<ffffffff8027dfb0>] ? print_irqtrace_events+0xd0/0xe0
[   75.400227]  [<ffffffff8024cd73>] __might_sleep+0x113/0x130
[   75.400235]  [<ffffffff8077c811>] rt_spin_lock+0xa1/0xb0
[   75.400241]  [<ffffffff80296a3d>] res_counter_charge+0x5d/0x130
[   75.400249]  [<ffffffff802fb67f>] __mem_cgroup_try_charge+0x7f/0x180
[   75.400255]  [<ffffffff802fc407>] mem_cgroup_charge_common+0x57/0x90
[   75.400263]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[   75.400269]  [<ffffffff802fc49d>] mem_cgroup_newpage_charge+0x5d/0x60
[   75.400276]  [<ffffffff802dba37>] handle_mm_fault+0x387/0x890
[   75.400282]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[   75.400289]  [<ffffffff8023495e>] do_page_fault+0x11e/0x2a0
[   75.400295]  [<ffffffff8077e5a5>] page_fault+0x25/0x30
[   76.402822] BUG: sleeping function called from invalid context at kernel/rtmutex.c:683
[   76.402831] in_atomic(): 0, irqs_disabled(): 1, pid: 4589, name: bash
[   76.402835] INFO: lockdep is turned off.
[   76.402839] irq event stamp: 0
[   76.402842] hardirqs last  enabled at (0): [<(null)>] (null)
[   76.402848] hardirqs last disabled at (0): [<ffffffff8025449d>] copy_process+0x68d/0x1500
[   76.402861] softirqs last  enabled at (0): [<ffffffff8025449d>] copy_process+0x68d/0x1500
[   76.402868] softirqs last disabled at (0): [<(null)>] (null)
[   76.402876] Pid: 4589, comm: bash Tainted: G        W  2.6.29-rc4-rt1-tip #1
[   76.402880] Call Trace:
[   76.402890]  [<ffffffff8027dfb0>] ? print_irqtrace_events+0xd0/0xe0
[   76.402896]  [<ffffffff8024cd73>] __might_sleep+0x113/0x130
[   76.402904]  [<ffffffff8077c811>] rt_spin_lock+0xa1/0xb0
[   76.402910]  [<ffffffff80296a3d>] res_counter_charge+0x5d/0x130
[   76.402917]  [<ffffffff802fb67f>] __mem_cgroup_try_charge+0x7f/0x180
[   76.402924]  [<ffffffff802fc407>] mem_cgroup_charge_common+0x57/0x90
[   76.402932]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[   76.402938]  [<ffffffff802fc49d>] mem_cgroup_newpage_charge+0x5d/0x60
[   76.402945]  [<ffffffff802dba37>] handle_mm_fault+0x387/0x890
[   76.402951]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[   76.402958]  [<ffffffff8023495e>] do_page_fault+0x11e/0x2a0
[   76.402964]  [<ffffffff8077e5a5>] page_fault+0x25/0x30
[   77.405166] BUG: sleeping function called from invalid context at kernel/rtmutex.c:683
[   77.405176] in_atomic(): 0, irqs_disabled(): 1, pid: 4514, name: geany
[   77.405180] INFO: lockdep is turned off.
[   77.405184] irq event stamp: 0
[   77.405187] hardirqs last  enabled at (0): [<(null)>] (null)
[   77.405193] hardirqs last disabled at (0): [<ffffffff8025449d>] copy_process+0x68d/0x1500
[   77.405205] softirqs last  enabled at (0): [<ffffffff8025449d>] copy_process+0x68d/0x1500
[   77.405212] softirqs last disabled at (0): [<(null)>] (null)
[   77.405219] Pid: 4514, comm: geany Tainted: G        W  2.6.29-rc4-rt1-tip #1
[   77.405224] Call Trace:
[   77.405233]  [<ffffffff8027dfb0>] ? print_irqtrace_events+0xd0/0xe0
[   77.405240]  [<ffffffff8024cd73>] __might_sleep+0x113/0x130
[   77.405247]  [<ffffffff8077c811>] rt_spin_lock+0xa1/0xb0
[   77.405253]  [<ffffffff80296a3d>] res_counter_charge+0x5d/0x130
[   77.405261]  [<ffffffff802fb67f>] __mem_cgroup_try_charge+0x7f/0x180
[   77.405267]  [<ffffffff802fc407>] mem_cgroup_charge_common+0x57/0x90
[   77.405274]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[   77.405280]  [<ffffffff802fc49d>] mem_cgroup_newpage_charge+0x5d/0x60
[   77.405287]  [<ffffffff802dba37>] handle_mm_fault+0x387/0x890
[   77.405294]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[   77.405300]  [<ffffffff8023495e>] do_page_fault+0x11e/0x2a0
[   77.405306]  [<ffffffff8077e5a5>] page_fault+0x25/0x30
[   77.405313]  [<ffffffff802c0a8b>] ? file_read_actor+0x6b/0x190
[   77.405319]  [<ffffffff802c0a41>] ? file_read_actor+0x21/0x190
[   77.405325]  [<ffffffff802c3031>] generic_file_aio_read+0x521/0x6c0
[   77.405332]  [<ffffffff802ff040>] ? do_sync_read+0x0/0x140
[   77.405338]  [<ffffffff802ff139>] do_sync_read+0xf9/0x140
[   77.405345]  [<ffffffff8026f5f0>] ? autoremove_wake_function+0x0/0x40
[   77.405351]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[   77.405358]  [<ffffffff803cfc39>] ? cap_file_permission+0x9/0x10
[   77.405365]  [<ffffffff803cea36>] ? security_file_permission+0x16/0x20
[   77.405371]  [<ffffffff802ffe18>] vfs_read+0xc8/0x190
[   77.405376]  [<ffffffff802fffe5>] sys_read+0x55/0x90
[   77.405382]  [<ffffffff80212422>] system_call_fastpath+0x16/0x1b
[   78.405258] BUG: sleeping function called from invalid context at kernel/rtmutex.c:683
[   78.405267] in_atomic(): 0, irqs_disabled(): 1, pid: 4583, name: bash
[   78.405271] INFO: lockdep is turned off.
[   78.405275] irq event stamp: 0
[   78.405278] hardirqs last  enabled at (0): [<(null)>] (null)
[   78.405284] hardirqs last disabled at (0): [<ffffffff8025449d>] copy_process+0x68d/0x1500
[   78.405296] softirqs last  enabled at (0): [<ffffffff8025449d>] copy_process+0x68d/0x1500
[   78.405304] softirqs last disabled at (0): [<(null)>] (null)
[   78.405311] Pid: 4583, comm: bash Tainted: G        W  2.6.29-rc4-rt1-tip #1
[   78.405316] Call Trace:
[   78.405325]  [<ffffffff8027dfb0>] ? print_irqtrace_events+0xd0/0xe0
[   78.405331]  [<ffffffff8024cd73>] __might_sleep+0x113/0x130
[   78.405339]  [<ffffffff8077c811>] rt_spin_lock+0xa1/0xb0
[   78.405345]  [<ffffffff80296a3d>] res_counter_charge+0x5d/0x130
[   78.405353]  [<ffffffff802fb67f>] __mem_cgroup_try_charge+0x7f/0x180
[   78.405359]  [<ffffffff802fc407>] mem_cgroup_charge_common+0x57/0x90
[   78.405366]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[   78.405372]  [<ffffffff802fc49d>] mem_cgroup_newpage_charge+0x5d/0x60
[   78.405380]  [<ffffffff802dba37>] handle_mm_fault+0x387/0x890
[   78.405386]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[   78.405393]  [<ffffffff8023495e>] do_page_fault+0x11e/0x2a0
[   78.405399]  [<ffffffff8077e5a5>] page_fault+0x25/0x30
[   79.415146] BUG: sleeping function called from invalid context at kernel/rtmutex.c:683
[   79.415155] in_atomic(): 0, irqs_disabled(): 1, pid: 4650, name: apt-cache
[   79.415160] INFO: lockdep is turned off.
[   79.415163] irq event stamp: 0
[   79.415167] hardirqs last  enabled at (0): [<(null)>] (null)
[   79.415173] hardirqs last disabled at (0): [<ffffffff8025449d>] copy_process+0x68d/0x1500
[   79.415185] softirqs last  enabled at (0): [<ffffffff8025449d>] copy_process+0x68d/0x1500
[   79.415193] softirqs last disabled at (0): [<(null)>] (null)
[   79.415200] Pid: 4650, comm: apt-cache Tainted: G        W  2.6.29-rc4-rt1-tip #1
[   79.415204] Call Trace:
[   79.415216]  [<ffffffff8027dfb0>] ? print_irqtrace_events+0xd0/0xe0
[   79.415223]  [<ffffffff8024cd73>] __might_sleep+0x113/0x130
[   79.415230]  [<ffffffff8077c811>] rt_spin_lock+0xa1/0xb0
[   79.415237]  [<ffffffff80296a3d>] res_counter_charge+0x5d/0x130
[   79.415244]  [<ffffffff802fb67f>] __mem_cgroup_try_charge+0x7f/0x180
[   79.415251]  [<ffffffff802fc407>] mem_cgroup_charge_common+0x57/0x90
[   79.415258]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[   79.415264]  [<ffffffff802fc753>] mem_cgroup_cache_charge+0xe3/0x140
[   79.415271]  [<ffffffff802c1497>] add_to_page_cache_locked+0x47/0xf0
[   79.415277]  [<ffffffff802c1571>] add_to_page_cache_lru+0x31/0x90
[   79.415285]  [<ffffffff8032f4dc>] mpage_readpages+0xbc/0x130
[   79.415292]  [<ffffffff8036dee0>] ? reiserfs_get_block+0x0/0x1210
[   79.415300]  [<ffffffff802c8e23>] ? __alloc_pages_internal+0xf3/0x510
[   79.415308]  [<ffffffff8036b8e0>] ? reiserfs_readpages+0x0/0x30
[   79.415314]  [<ffffffff8036b8ff>] reiserfs_readpages+0x1f/0x30
[   79.415321]  [<ffffffff802cb5f1>] __do_page_cache_readahead+0x181/0x260
[   79.415328]  [<ffffffff802cb736>] do_page_cache_readahead+0x66/0x90
[   79.415334]  [<ffffffff802c1be2>] filemap_fault+0x352/0x4f0
[   79.415341]  [<ffffffff802d9285>] __do_fault+0x55/0x4c0
[   79.415347]  [<ffffffff802db8b5>] handle_mm_fault+0x205/0x890
[   79.415353]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[   79.415361]  [<ffffffff8023495e>] do_page_fault+0x11e/0x2a0
[   79.415367]  [<ffffffff8077e5a5>] page_fault+0x25/0x30
[   80.415481] BUG: sleeping function called from invalid context at kernel/rtmutex.c:683
[   80.415489] in_atomic(): 0, irqs_disabled(): 1, pid: 4650, name: apt-cache
[   80.415494] INFO: lockdep is turned off.
[   80.415498] irq event stamp: 0
[   80.415501] hardirqs last  enabled at (0): [<(null)>] (null)
[   80.415507] hardirqs last disabled at (0): [<ffffffff8025449d>] copy_process+0x68d/0x1500
[   80.415519] softirqs last  enabled at (0): [<ffffffff8025449d>] copy_process+0x68d/0x1500
[   80.415526] softirqs last disabled at (0): [<(null)>] (null)
[   80.415533] Pid: 4650, comm: apt-cache Tainted: G        W  2.6.29-rc4-rt1-tip #1
[   80.415538] Call Trace:
[   80.415547]  [<ffffffff8027dfb0>] ? print_irqtrace_events+0xd0/0xe0
[   80.415554]  [<ffffffff8024cd73>] __might_sleep+0x113/0x130
[   80.415562]  [<ffffffff8077c811>] rt_spin_lock+0xa1/0xb0
[   80.415568]  [<ffffffff80296a3d>] res_counter_charge+0x5d/0x130
[   80.415575]  [<ffffffff802fb67f>] __mem_cgroup_try_charge+0x7f/0x180
[   80.415582]  [<ffffffff802fc407>] mem_cgroup_charge_common+0x57/0x90
[   80.415589]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[   80.415595]  [<ffffffff802fc753>] mem_cgroup_cache_charge+0xe3/0x140
[   80.415602]  [<ffffffff802c1497>] add_to_page_cache_locked+0x47/0xf0
[   80.415608]  [<ffffffff802c1571>] add_to_page_cache_lru+0x31/0x90
[   80.415615]  [<ffffffff8032f4dc>] mpage_readpages+0xbc/0x130
[   80.415622]  [<ffffffff8036dee0>] ? reiserfs_get_block+0x0/0x1210
[   80.415629]  [<ffffffff802c8e23>] ? __alloc_pages_internal+0xf3/0x510
[   80.415636]  [<ffffffff802a813d>] ? __rcu_read_unlock+0xad/0xe0
[   80.415642]  [<ffffffff80280ed9>] ? trace_hardirqs_on_caller+0x29/0x1f0
[   80.415649]  [<ffffffff8036b8e0>] ? reiserfs_readpages+0x0/0x30
[   80.415656]  [<ffffffff8036b8ff>] reiserfs_readpages+0x1f/0x30
[   80.415662]  [<ffffffff802cb5f1>] __do_page_cache_readahead+0x181/0x260
[   80.415669]  [<ffffffff802cb736>] do_page_cache_readahead+0x66/0x90
[   80.415675]  [<ffffffff802c1be2>] filemap_fault+0x352/0x4f0
[   80.415682]  [<ffffffff802d9285>] __do_fault+0x55/0x4c0
[   80.415688]  [<ffffffff802db8b5>] handle_mm_fault+0x205/0x890
[   80.415694]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[   80.415701]  [<ffffffff8023495e>] do_page_fault+0x11e/0x2a0
[   80.415707]  [<ffffffff8077e5a5>] page_fault+0x25/0x30
[   81.413509] BUG: sleeping function called from invalid context at kernel/rtmutex.c:683
[   81.413518] in_atomic(): 0, irqs_disabled(): 1, pid: 4441, name: firefox
[   81.413523] INFO: lockdep is turned off.
[   81.413527] irq event stamp: 0
[   81.413530] hardirqs last  enabled at (0): [<(null)>] (null)
[   81.413536] hardirqs last disabled at (0): [<ffffffff8025449d>] copy_process+0x68d/0x1500
[   81.413548] softirqs last  enabled at (0): [<ffffffff8025449d>] copy_process+0x68d/0x1500
[   81.413556] softirqs last disabled at (0): [<(null)>] (null)
[   81.413563] Pid: 4441, comm: firefox Tainted: G        W  2.6.29-rc4-rt1-tip #1
[   81.413567] Call Trace:
[   81.413577]  [<ffffffff8027dfb0>] ? print_irqtrace_events+0xd0/0xe0
[   81.413584]  [<ffffffff8024cd73>] __might_sleep+0x113/0x130
[   81.413591]  [<ffffffff8077c811>] rt_spin_lock+0xa1/0xb0
[   81.413597]  [<ffffffff80296a3d>] res_counter_charge+0x5d/0x130
[   81.413605]  [<ffffffff802fb67f>] __mem_cgroup_try_charge+0x7f/0x180
[   81.413611]  [<ffffffff802fc407>] mem_cgroup_charge_common+0x57/0x90
[   81.413618]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[   81.413624]  [<ffffffff802fc49d>] mem_cgroup_newpage_charge+0x5d/0x60
[   81.413632]  [<ffffffff802dba37>] handle_mm_fault+0x387/0x890
[   81.413638]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[   81.413645]  [<ffffffff8023495e>] do_page_fault+0x11e/0x2a0
[   81.413651]  [<ffffffff8077e5a5>] page_fault+0x25/0x30
[   82.418681] BUG: sleeping function called from invalid context at kernel/rtmutex.c:683
[   82.418689] in_atomic(): 0, irqs_disabled(): 1, pid: 4441, name: firefox
[   82.418694] INFO: lockdep is turned off.
[   82.418698] irq event stamp: 0
[   82.418701] hardirqs last  enabled at (0): [<(null)>] (null)
[   82.418707] hardirqs last disabled at (0): [<ffffffff8025449d>] copy_process+0x68d/0x1500
[   82.418719] softirqs last  enabled at (0): [<ffffffff8025449d>] copy_process+0x68d/0x1500
[   82.418726] softirqs last disabled at (0): [<(null)>] (null)
[   82.418733] Pid: 4441, comm: firefox Tainted: G        W  2.6.29-rc4-rt1-tip #1
[   82.418738] Call Trace:
[   82.418747]  [<ffffffff8027dfb0>] ? print_irqtrace_events+0xd0/0xe0
[   82.418754]  [<ffffffff8024cd73>] __might_sleep+0x113/0x130
[   82.418761]  [<ffffffff8077c811>] rt_spin_lock+0xa1/0xb0
[   82.418768]  [<ffffffff80296a3d>] res_counter_charge+0x5d/0x130
[   82.418775]  [<ffffffff802fb67f>] __mem_cgroup_try_charge+0x7f/0x180
[   82.418781]  [<ffffffff802fc407>] mem_cgroup_charge_common+0x57/0x90
[   82.418788]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[   82.418794]  [<ffffffff802fc49d>] mem_cgroup_newpage_charge+0x5d/0x60
[   82.418802]  [<ffffffff802dba37>] handle_mm_fault+0x387/0x890
[   82.418808]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[   82.418815]  [<ffffffff8023495e>] do_page_fault+0x11e/0x2a0
[   82.418821]  [<ffffffff8077e5a5>] page_fault+0x25/0x30
[   83.416791] BUG: sleeping function called from invalid context at kernel/rtmutex.c:683
[   83.416799] in_atomic(): 0, irqs_disabled(): 1, pid: 4441, name: firefox
[   83.416804] INFO: lockdep is turned off.
[   83.416808] irq event stamp: 0
[   83.416811] hardirqs last  enabled at (0): [<(null)>] (null)
[   83.416817] hardirqs last disabled at (0): [<ffffffff8025449d>] copy_process+0x68d/0x1500
[   83.416829] softirqs last  enabled at (0): [<ffffffff8025449d>] copy_process+0x68d/0x1500
[   83.416836] softirqs last disabled at (0): [<(null)>] (null)
[   83.416843] Pid: 4441, comm: firefox Tainted: G        W  2.6.29-rc4-rt1-tip #1
[   83.416848] Call Trace:
[   83.416857]  [<ffffffff8027dfb0>] ? print_irqtrace_events+0xd0/0xe0
[   83.416864]  [<ffffffff8024cd73>] __might_sleep+0x113/0x130
[   83.416871]  [<ffffffff8077c811>] rt_spin_lock+0xa1/0xb0
[   83.416878]  [<ffffffff80296a3d>] res_counter_charge+0x5d/0x130
[   83.416886]  [<ffffffff802fb67f>] __mem_cgroup_try_charge+0x7f/0x180
[   83.416892]  [<ffffffff802fc407>] mem_cgroup_charge_common+0x57/0x90
[   83.416900]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[   83.416906]  [<ffffffff802fc49d>] mem_cgroup_newpage_charge+0x5d/0x60
[   83.416913]  [<ffffffff802dba37>] handle_mm_fault+0x387/0x890
[   83.416919]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[   83.416926]  [<ffffffff8023495e>] do_page_fault+0x11e/0x2a0
[   83.416932]  [<ffffffff8077e5a5>] page_fault+0x25/0x30
[   84.435979] BUG: sleeping function called from invalid context at kernel/rtmutex.c:683
[   84.435988] in_atomic(): 0, irqs_disabled(): 1, pid: 4441, name: firefox
[   84.435993] INFO: lockdep is turned off.
[   84.435997] irq event stamp: 0
[   84.436000] hardirqs last  enabled at (0): [<(null)>] (null)
[   84.436006] hardirqs last disabled at (0): [<ffffffff8025449d>] copy_process+0x68d/0x1500
[   84.436019] softirqs last  enabled at (0): [<ffffffff8025449d>] copy_process+0x68d/0x1500
[   84.436027] softirqs last disabled at (0): [<(null)>] (null)
[   84.436034] Pid: 4441, comm: firefox Tainted: G        W  2.6.29-rc4-rt1-tip #1
[   84.436039] Call Trace:
[   84.436049]  [<ffffffff8027dfb0>] ? print_irqtrace_events+0xd0/0xe0
[   84.436055]  [<ffffffff8024cd73>] __might_sleep+0x113/0x130
[   84.436064]  [<ffffffff8077c811>] rt_spin_lock+0xa1/0xb0
[   84.436071]  [<ffffffff80296a3d>] res_counter_charge+0x5d/0x130
[   84.436079]  [<ffffffff802fb67f>] __mem_cgroup_try_charge+0x7f/0x180
[   84.436085]  [<ffffffff802fc407>] mem_cgroup_charge_common+0x57/0x90
[   84.436093]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[   84.436099]  [<ffffffff802fc49d>] mem_cgroup_newpage_charge+0x5d/0x60
[   84.436106]  [<ffffffff802dba37>] handle_mm_fault+0x387/0x890
[   84.436112]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[   84.436120]  [<ffffffff8023495e>] do_page_fault+0x11e/0x2a0
[   84.436126]  [<ffffffff8077e5a5>] page_fault+0x25/0x30
[   85.432123] BUG: sleeping function called from invalid context at kernel/rtmutex.c:683
[   85.432132] in_atomic(): 0, irqs_disabled(): 1, pid: 4441, name: firefox
[   85.432137] INFO: lockdep is turned off.
[   85.432141] irq event stamp: 0
[   85.432144] hardirqs last  enabled at (0): [<(null)>] (null)
[   85.432150] hardirqs last disabled at (0): [<ffffffff8025449d>] copy_process+0x68d/0x1500
[   85.432162] softirqs last  enabled at (0): [<ffffffff8025449d>] copy_process+0x68d/0x1500
[   85.432170] softirqs last disabled at (0): [<(null)>] (null)
[   85.432177] Pid: 4441, comm: firefox Tainted: G        W  2.6.29-rc4-rt1-tip #1
[   85.432182] Call Trace:
[   85.432191]  [<ffffffff8027dfb0>] ? print_irqtrace_events+0xd0/0xe0
[   85.432198]  [<ffffffff8024cd73>] __might_sleep+0x113/0x130
[   85.432205]  [<ffffffff8077c811>] rt_spin_lock+0xa1/0xb0
[   85.432212]  [<ffffffff80296a3d>] res_counter_charge+0x5d/0x130
[   85.432219]  [<ffffffff802fb67f>] __mem_cgroup_try_charge+0x7f/0x180
[   85.432226]  [<ffffffff802fc407>] mem_cgroup_charge_common+0x57/0x90
[   85.432233]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[   85.432239]  [<ffffffff802fc49d>] mem_cgroup_newpage_charge+0x5d/0x60
[   85.432247]  [<ffffffff802dba37>] handle_mm_fault+0x387/0x890
[   85.432253]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[   85.432260]  [<ffffffff8023495e>] do_page_fault+0x11e/0x2a0
[   85.432266]  [<ffffffff8077e5a5>] page_fault+0x25/0x30
[   86.454653] BUG: sleeping function called from invalid context at kernel/rtmutex.c:683
[   86.454662] in_atomic(): 0, irqs_disabled(): 1, pid: 4441, name: firefox
[   86.454667] INFO: lockdep is turned off.
[   86.454671] irq event stamp: 0
[   86.454674] hardirqs last  enabled at (0): [<(null)>] (null)
[   86.454680] hardirqs last disabled at (0): [<ffffffff8025449d>] copy_process+0x68d/0x1500
[   86.454692] softirqs last  enabled at (0): [<ffffffff8025449d>] copy_process+0x68d/0x1500
[   86.454699] softirqs last disabled at (0): [<(null)>] (null)
[   86.454706] Pid: 4441, comm: firefox Tainted: G        W  2.6.29-rc4-rt1-tip #1
[   86.454711] Call Trace:
[   86.454720]  [<ffffffff8027dfb0>] ? print_irqtrace_events+0xd0/0xe0
[   86.454727]  [<ffffffff8024cd73>] __might_sleep+0x113/0x130
[   86.454734]  [<ffffffff8077c811>] rt_spin_lock+0xa1/0xb0
[   86.454741]  [<ffffffff80296a3d>] res_counter_charge+0x5d/0x130
[   86.454748]  [<ffffffff802fb67f>] __mem_cgroup_try_charge+0x7f/0x180
[   86.454755]  [<ffffffff802fc407>] mem_cgroup_charge_common+0x57/0x90
[   86.454762]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[   86.454768]  [<ffffffff802fc49d>] mem_cgroup_newpage_charge+0x5d/0x60
[   86.454775]  [<ffffffff802dba37>] handle_mm_fault+0x387/0x890
[   86.454781]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[   86.454789]  [<ffffffff8023495e>] do_page_fault+0x11e/0x2a0
[   86.454795]  [<ffffffff8077e5a5>] page_fault+0x25/0x30
[   87.453221] BUG: sleeping function called from invalid context at kernel/rtmutex.c:683
[   87.453230] in_atomic(): 0, irqs_disabled(): 1, pid: 4441, name: firefox
[   87.453235] INFO: lockdep is turned off.
[   87.453239] irq event stamp: 0
[   87.453242] hardirqs last  enabled at (0): [<(null)>] (null)
[   87.453248] hardirqs last disabled at (0): [<ffffffff8025449d>] copy_process+0x68d/0x1500
[   87.453260] softirqs last  enabled at (0): [<ffffffff8025449d>] copy_process+0x68d/0x1500
[   87.453267] softirqs last disabled at (0): [<(null)>] (null)
[   87.453274] Pid: 4441, comm: firefox Tainted: G        W  2.6.29-rc4-rt1-tip #1
[   87.453279] Call Trace:
[   87.453288]  [<ffffffff8027dfb0>] ? print_irqtrace_events+0xd0/0xe0
[   87.453295]  [<ffffffff8024cd73>] __might_sleep+0x113/0x130
[   87.453302]  [<ffffffff8077c811>] rt_spin_lock+0xa1/0xb0
[   87.453308]  [<ffffffff80296a3d>] res_counter_charge+0x5d/0x130
[   87.453316]  [<ffffffff802fb67f>] __mem_cgroup_try_charge+0x7f/0x180
[   87.453322]  [<ffffffff802fc407>] mem_cgroup_charge_common+0x57/0x90
[   87.453330]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[   87.453336]  [<ffffffff802fc49d>] mem_cgroup_newpage_charge+0x5d/0x60
[   87.453343]  [<ffffffff802dba37>] handle_mm_fault+0x387/0x890
[   87.453349]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[   87.453356]  [<ffffffff8023495e>] do_page_fault+0x11e/0x2a0
[   87.453362]  [<ffffffff8077e5a5>] page_fault+0x25/0x30
[   88.478497] BUG: sleeping function called from invalid context at kernel/rtmutex.c:683
[   88.478507] in_atomic(): 0, irqs_disabled(): 1, pid: 4441, name: firefox
[   88.478512] INFO: lockdep is turned off.
[   88.478515] irq event stamp: 0
[   88.478518] hardirqs last  enabled at (0): [<(null)>] (null)
[   88.478524] hardirqs last disabled at (0): [<ffffffff8025449d>] copy_process+0x68d/0x1500
[   88.478537] softirqs last  enabled at (0): [<ffffffff8025449d>] copy_process+0x68d/0x1500
[   88.478544] softirqs last disabled at (0): [<(null)>] (null)
[   88.478551] Pid: 4441, comm: firefox Tainted: G        W  2.6.29-rc4-rt1-tip #1
[   88.478556] Call Trace:
[   88.478566]  [<ffffffff8027dfb0>] ? print_irqtrace_events+0xd0/0xe0
[   88.478572]  [<ffffffff8024cd73>] __might_sleep+0x113/0x130
[   88.478580]  [<ffffffff8077c811>] rt_spin_lock+0xa1/0xb0
[   88.478587]  [<ffffffff80296a3d>] res_counter_charge+0x5d/0x130
[   88.478594]  [<ffffffff802fb67f>] __mem_cgroup_try_charge+0x7f/0x180
[   88.478600]  [<ffffffff802fc407>] mem_cgroup_charge_common+0x57/0x90
[   88.478608]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[   88.478614]  [<ffffffff802fc49d>] mem_cgroup_newpage_charge+0x5d/0x60
[   88.478621]  [<ffffffff802dba37>] handle_mm_fault+0x387/0x890
[   88.478627]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[   88.478634]  [<ffffffff8023495e>] do_page_fault+0x11e/0x2a0
[   88.478640]  [<ffffffff8077e5a5>] page_fault+0x25/0x30
[   89.484892] BUG: sleeping function called from invalid context at kernel/rtmutex.c:683
[   89.484900] in_atomic(): 0, irqs_disabled(): 1, pid: 4674, name: linux32
[   89.484905] INFO: lockdep is turned off.
[   89.484909] irq event stamp: 0
[   89.484912] hardirqs last  enabled at (0): [<(null)>] (null)
[   89.484918] hardirqs last disabled at (0): [<ffffffff8025449d>] copy_process+0x68d/0x1500
[   89.484930] softirqs last  enabled at (0): [<ffffffff8025449d>] copy_process+0x68d/0x1500
[   89.484937] softirqs last disabled at (0): [<(null)>] (null)
[   89.484944] Pid: 4674, comm: linux32 Tainted: G        W  2.6.29-rc4-rt1-tip #1
[   89.484949] Call Trace:
[   89.484958]  [<ffffffff8027dfb0>] ? print_irqtrace_events+0xd0/0xe0
[   89.484965]  [<ffffffff8024cd73>] __might_sleep+0x113/0x130
[   89.484972]  [<ffffffff8077c811>] rt_spin_lock+0xa1/0xb0
[   89.484979]  [<ffffffff80296a3d>] res_counter_charge+0x5d/0x130
[   89.484987]  [<ffffffff802fb67f>] __mem_cgroup_try_charge+0x7f/0x180
[   89.484993]  [<ffffffff802fc407>] mem_cgroup_charge_common+0x57/0x90
[   89.485000]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[   89.485006]  [<ffffffff802fc753>] mem_cgroup_cache_charge+0xe3/0x140
[   89.485013]  [<ffffffff802c1497>] add_to_page_cache_locked+0x47/0xf0
[   89.485019]  [<ffffffff802c1571>] add_to_page_cache_lru+0x31/0x90
[   89.485027]  [<ffffffff8032f4dc>] mpage_readpages+0xbc/0x130
[   89.485034]  [<ffffffff8036dee0>] ? reiserfs_get_block+0x0/0x1210
[   89.485042]  [<ffffffff802c8e23>] ? __alloc_pages_internal+0xf3/0x510
[   89.485049]  [<ffffffff8036b8e0>] ? reiserfs_readpages+0x0/0x30
[   89.485055]  [<ffffffff8036b8ff>] reiserfs_readpages+0x1f/0x30
[   89.485062]  [<ffffffff802cb5f1>] __do_page_cache_readahead+0x181/0x260
[   89.485068]  [<ffffffff802cba73>] ondemand_readahead+0x193/0x210
[   89.485075]  [<ffffffff802cbbd5>] page_cache_sync_readahead+0x25/0x30
[   89.485081]  [<ffffffff802c2f64>] generic_file_aio_read+0x454/0x6c0
[   89.485088]  [<ffffffff802ff040>] ? do_sync_read+0x0/0x140
[   89.485094]  [<ffffffff802ff139>] do_sync_read+0xf9/0x140
[   89.485100]  [<ffffffff8026f5f0>] ? autoremove_wake_function+0x0/0x40
[   89.485106]  [<ffffffff8077c843>] ? rt_spin_unlock+0x23/0x80
[   89.485113]  [<ffffffff80308020>] ? deny_write_access+0x30/0x70
[   89.485119]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[   89.485127]  [<ffffffff803cfc39>] ? cap_file_permission+0x9/0x10
[   89.485133]  [<ffffffff803cea36>] ? security_file_permission+0x16/0x20
[   89.485139]  [<ffffffff802ffe18>] vfs_read+0xc8/0x190
[   89.485145]  [<ffffffff8030550f>] kernel_read+0x3f/0x60
[   89.485151]  [<ffffffff803492ee>] load_elf_binary+0x1b6e/0x2020
[   89.485158]  [<ffffffff802cc768>] ? __lru_cache_add+0x48/0xd0
[   89.485165]  [<ffffffff802da2f7>] ? follow_page+0x237/0x340
[   89.485171]  [<ffffffff8077c843>] ? rt_spin_unlock+0x23/0x80
[   89.485177]  [<ffffffff802da3ae>] ? follow_page+0x2ee/0x340
[   89.485183]  [<ffffffff802dc06c>] ? __get_user_pages+0x12c/0x4c0
[   89.485189]  [<ffffffff8077d63d>] ? __spin_unlock_irqrestore+0x6d/0x80
[   89.485195]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[   89.485201]  [<ffffffff8077d63d>] ? __spin_unlock_irqrestore+0x6d/0x80
[   89.485207]  [<ffffffff80347780>] ? load_elf_binary+0x0/0x2020
[   89.485212]  [<ffffffff80304857>] search_binary_handler+0xc7/0x240
[   89.485218]  [<ffffffff80305eac>] do_execve+0x22c/0x2a0
[   89.485225]  [<ffffffff8021057e>] sys_execve+0x4e/0x80
[   89.485231]  [<ffffffff8021298a>] stub_execve+0x6a/0xc0
[   90.486459] BUG: sleeping function called from invalid context at kernel/rtmutex.c:683
[   90.486468] in_atomic(): 0, irqs_disabled(): 1, pid: 4674, name: npviewer.bin
[   90.486472] INFO: lockdep is turned off.
[   90.486476] irq event stamp: 0
[   90.486479] hardirqs last  enabled at (0): [<(null)>] (null)
[   90.486485] hardirqs last disabled at (0): [<ffffffff8025449d>] copy_process+0x68d/0x1500
[   90.486497] softirqs last  enabled at (0): [<ffffffff8025449d>] copy_process+0x68d/0x1500
[   90.486505] softirqs last disabled at (0): [<(null)>] (null)
[   90.486512] Pid: 4674, comm: npviewer.bin Tainted: G        W  2.6.29-rc4-rt1-tip #1
[   90.486517] Call Trace:
[   90.486526]  [<ffffffff8027dfb0>] ? print_irqtrace_events+0xd0/0xe0
[   90.486533]  [<ffffffff8024cd73>] __might_sleep+0x113/0x130
[   90.486540]  [<ffffffff8077c811>] rt_spin_lock+0xa1/0xb0
[   90.486547]  [<ffffffff80296a3d>] res_counter_charge+0x5d/0x130
[   90.486554]  [<ffffffff802fb67f>] __mem_cgroup_try_charge+0x7f/0x180
[   90.486560]  [<ffffffff802fc407>] mem_cgroup_charge_common+0x57/0x90
[   90.486568]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[   90.486574]  [<ffffffff802fc753>] mem_cgroup_cache_charge+0xe3/0x140
[   90.486581]  [<ffffffff802c1497>] add_to_page_cache_locked+0x47/0xf0
[   90.486587]  [<ffffffff802c1571>] add_to_page_cache_lru+0x31/0x90
[   90.486594]  [<ffffffff8032f4dc>] mpage_readpages+0xbc/0x130
[   90.486601]  [<ffffffff8036dee0>] ? reiserfs_get_block+0x0/0x1210
[   90.486609]  [<ffffffff802c8e23>] ? __alloc_pages_internal+0xf3/0x510
[   90.486616]  [<ffffffff8036b8e0>] ? reiserfs_readpages+0x0/0x30
[   90.486622]  [<ffffffff8036b8ff>] reiserfs_readpages+0x1f/0x30
[   90.486629]  [<ffffffff802cb5f1>] __do_page_cache_readahead+0x181/0x260
[   90.486636]  [<ffffffff802cb736>] do_page_cache_readahead+0x66/0x90
[   90.486641]  [<ffffffff802c1be2>] filemap_fault+0x352/0x4f0
[   90.486649]  [<ffffffff802d9285>] __do_fault+0x55/0x4c0
[   90.486654]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[   90.486661]  [<ffffffff802db8b5>] handle_mm_fault+0x205/0x890
[   90.486667]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[   90.486674]  [<ffffffff8023495e>] do_page_fault+0x11e/0x2a0
[   90.486680]  [<ffffffff8077e5a5>] page_fault+0x25/0x30
[   91.537577] BUG: sleeping function called from invalid context at kernel/rtmutex.c:683
[   91.537586] in_atomic(): 0, irqs_disabled(): 1, pid: 4441, name: firefox
[   91.537591] INFO: lockdep is turned off.
[   91.537595] irq event stamp: 0
[   91.537598] hardirqs last  enabled at (0): [<(null)>] (null)
[   91.537604] hardirqs last disabled at (0): [<ffffffff8025449d>] copy_process+0x68d/0x1500
[   91.537616] softirqs last  enabled at (0): [<ffffffff8025449d>] copy_process+0x68d/0x1500
[   91.537624] softirqs last disabled at (0): [<(null)>] (null)
[   91.537631] Pid: 4441, comm: firefox Tainted: G        W  2.6.29-rc4-rt1-tip #1
[   91.537636] Call Trace:
[   91.537645]  [<ffffffff8027dfb0>] ? print_irqtrace_events+0xd0/0xe0
[   91.537651]  [<ffffffff8024cd73>] __might_sleep+0x113/0x130
[   91.537659]  [<ffffffff8077c811>] rt_spin_lock+0xa1/0xb0
[   91.537666]  [<ffffffff80296a3d>] res_counter_charge+0x5d/0x130
[   91.537673]  [<ffffffff802fb67f>] __mem_cgroup_try_charge+0x7f/0x180
[   91.537679]  [<ffffffff802fc407>] mem_cgroup_charge_common+0x57/0x90
[   91.537687]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[   91.537692]  [<ffffffff802fc49d>] mem_cgroup_newpage_charge+0x5d/0x60
[   91.537700]  [<ffffffff802dba37>] handle_mm_fault+0x387/0x890
[   91.537706]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[   91.537713]  [<ffffffff8023495e>] do_page_fault+0x11e/0x2a0
[   91.537719]  [<ffffffff8077e5a5>] page_fault+0x25/0x30
[   92.548199] BUG: sleeping function called from invalid context at kernel/rtmutex.c:683
[   92.548208] in_atomic(): 0, irqs_disabled(): 1, pid: 4682, name: npviewer.bin
[   92.548212] INFO: lockdep is turned off.
[   92.548216] irq event stamp: 0
[   92.548219] hardirqs last  enabled at (0): [<(null)>] (null)
[   92.548225] hardirqs last disabled at (0): [<ffffffff8025449d>] copy_process+0x68d/0x1500
[   92.548237] softirqs last  enabled at (0): [<ffffffff8025449d>] copy_process+0x68d/0x1500
[   92.548245] softirqs last disabled at (0): [<(null)>] (null)
[   92.548252] Pid: 4682, comm: npviewer.bin Tainted: G        W  2.6.29-rc4-rt1-tip #1
[   92.548257] Call Trace:
[   92.548266]  [<ffffffff8027dfb0>] ? print_irqtrace_events+0xd0/0xe0
[   92.548273]  [<ffffffff8024cd73>] __might_sleep+0x113/0x130
[   92.548280]  [<ffffffff8077c811>] rt_spin_lock+0xa1/0xb0
[   92.548286]  [<ffffffff80296a3d>] res_counter_charge+0x5d/0x130
[   92.548294]  [<ffffffff802fb67f>] __mem_cgroup_try_charge+0x7f/0x180
[   92.548300]  [<ffffffff802fc407>] mem_cgroup_charge_common+0x57/0x90
[   92.548308]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[   92.548313]  [<ffffffff802fc49d>] mem_cgroup_newpage_charge+0x5d/0x60
[   92.548321]  [<ffffffff802dba37>] handle_mm_fault+0x387/0x890
[   92.548327]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[   92.548334]  [<ffffffff8023495e>] do_page_fault+0x11e/0x2a0
[   92.548340]  [<ffffffff8077e5a5>] page_fault+0x25/0x30
[   93.602269] BUG: sleeping function called from invalid context at kernel/rtmutex.c:683
[   93.602278] in_atomic(): 0, irqs_disabled(): 1, pid: 4682, name: npviewer.bin
[   93.602283] INFO: lockdep is turned off.
[   93.602287] irq event stamp: 0
[   93.602290] hardirqs last  enabled at (0): [<(null)>] (null)
[   93.602296] hardirqs last disabled at (0): [<ffffffff8025449d>] copy_process+0x68d/0x1500
[   93.602308] softirqs last  enabled at (0): [<ffffffff8025449d>] copy_process+0x68d/0x1500
[   93.602315] softirqs last disabled at (0): [<(null)>] (null)
[   93.602322] Pid: 4682, comm: npviewer.bin Tainted: G        W  2.6.29-rc4-rt1-tip #1
[   93.602327] Call Trace:
[   93.602336]  [<ffffffff8027dfb0>] ? print_irqtrace_events+0xd0/0xe0
[   93.602343]  [<ffffffff8024cd73>] __might_sleep+0x113/0x130
[   93.602350]  [<ffffffff8077c811>] rt_spin_lock+0xa1/0xb0
[   93.602357]  [<ffffffff80296a3d>] res_counter_charge+0x5d/0x130
[   93.602364]  [<ffffffff802fb67f>] __mem_cgroup_try_charge+0x7f/0x180
[   93.602370]  [<ffffffff802fc407>] mem_cgroup_charge_common+0x57/0x90
[   93.602378]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[   93.602384]  [<ffffffff802fc753>] mem_cgroup_cache_charge+0xe3/0x140
[   93.602391]  [<ffffffff802c1497>] add_to_page_cache_locked+0x47/0xf0
[   93.602397]  [<ffffffff802c1571>] add_to_page_cache_lru+0x31/0x90
[   93.602404]  [<ffffffff8032f4dc>] mpage_readpages+0xbc/0x130
[   93.602411]  [<ffffffff8036dee0>] ? reiserfs_get_block+0x0/0x1210
[   93.602418]  [<ffffffff802c8e23>] ? __alloc_pages_internal+0xf3/0x510
[   93.602426]  [<ffffffff8036b8e0>] ? reiserfs_readpages+0x0/0x30
[   93.602432]  [<ffffffff8036b8ff>] reiserfs_readpages+0x1f/0x30
[   93.602439]  [<ffffffff802cb5f1>] __do_page_cache_readahead+0x181/0x260
[   93.602445]  [<ffffffff802cb736>] do_page_cache_readahead+0x66/0x90
[   93.602451]  [<ffffffff802c1be2>] filemap_fault+0x352/0x4f0
[   93.602458]  [<ffffffff802d9285>] __do_fault+0x55/0x4c0
[   93.602464]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[   93.602470]  [<ffffffff802db8b5>] handle_mm_fault+0x205/0x890
[   93.602476]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[   93.602483]  [<ffffffff8023495e>] do_page_fault+0x11e/0x2a0
[   93.602489]  [<ffffffff8077e5a5>] page_fault+0x25/0x30
[   94.604670] BUG: sleeping function called from invalid context at kernel/rtmutex.c:683
[   94.604680] in_atomic(): 0, irqs_disabled(): 1, pid: 4441, name: firefox
[   94.604685] INFO: lockdep is turned off.
[   94.604688] irq event stamp: 0
[   94.604692] hardirqs last  enabled at (0): [<(null)>] (null)
[   94.604697] hardirqs last disabled at (0): [<ffffffff8025449d>] copy_process+0x68d/0x1500
[   94.604709] softirqs last  enabled at (0): [<ffffffff8025449d>] copy_process+0x68d/0x1500
[   94.604717] softirqs last disabled at (0): [<(null)>] (null)
[   94.604724] Pid: 4441, comm: firefox Tainted: G        W  2.6.29-rc4-rt1-tip #1
[   94.604729] Call Trace:
[   94.604738]  [<ffffffff8027dfb0>] ? print_irqtrace_events+0xd0/0xe0
[   94.604745]  [<ffffffff8024cd73>] __might_sleep+0x113/0x130
[   94.604752]  [<ffffffff8077c811>] rt_spin_lock+0xa1/0xb0
[   94.604759]  [<ffffffff80296a3d>] res_counter_charge+0x5d/0x130
[   94.604766]  [<ffffffff802fb67f>] __mem_cgroup_try_charge+0x7f/0x180
[   94.604772]  [<ffffffff802fc407>] mem_cgroup_charge_common+0x57/0x90
[   94.604780]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[   94.604785]  [<ffffffff802fc753>] mem_cgroup_cache_charge+0xe3/0x140
[   94.604793]  [<ffffffff802c1497>] add_to_page_cache_locked+0x47/0xf0
[   94.604798]  [<ffffffff802c1571>] add_to_page_cache_lru+0x31/0x90
[   94.604806]  [<ffffffff8032f4dc>] mpage_readpages+0xbc/0x130
[   94.604813]  [<ffffffff8036dee0>] ? reiserfs_get_block+0x0/0x1210
[   94.604820]  [<ffffffff802c8e23>] ? __alloc_pages_internal+0xf3/0x510
[   94.604828]  [<ffffffff8036b8e0>] ? reiserfs_readpages+0x0/0x30
[   94.604834]  [<ffffffff8036b8ff>] reiserfs_readpages+0x1f/0x30
[   94.604840]  [<ffffffff802cb5f1>] __do_page_cache_readahead+0x181/0x260
[   94.604847]  [<ffffffff802cbae5>] ondemand_readahead+0x205/0x210
[   94.604853]  [<ffffffff802cbbd5>] page_cache_sync_readahead+0x25/0x30
[   94.604859]  [<ffffffff802c2f64>] generic_file_aio_read+0x454/0x6c0
[   94.604866]  [<ffffffff802ff040>] ? do_sync_read+0x0/0x140
[   94.604872]  [<ffffffff802ff139>] do_sync_read+0xf9/0x140
[   94.604879]  [<ffffffff8026f5f0>] ? autoremove_wake_function+0x0/0x40
[   94.604885]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[   94.604892]  [<ffffffff803cfc39>] ? cap_file_permission+0x9/0x10
[   94.604899]  [<ffffffff803cea36>] ? security_file_permission+0x16/0x20
[   94.604905]  [<ffffffff802ffe18>] vfs_read+0xc8/0x190
[   94.604911]  [<ffffffff802fffe5>] sys_read+0x55/0x90
[   94.604917]  [<ffffffff80212422>] system_call_fastpath+0x16/0x1b
[   95.614963] BUG: sleeping function called from invalid context at kernel/rtmutex.c:683
[   95.614972] in_atomic(): 0, irqs_disabled(): 1, pid: 4076, name: Xorg
[   95.614977] INFO: lockdep is turned off.
[   95.614981] irq event stamp: 0
[   95.614984] hardirqs last  enabled at (0): [<(null)>] (null)
[   95.614990] hardirqs last disabled at (0): [<ffffffff8025449d>] copy_process+0x68d/0x1500
[   95.615002] softirqs last  enabled at (0): [<ffffffff8025449d>] copy_process+0x68d/0x1500
[   95.615010] softirqs last disabled at (0): [<(null)>] (null)
[   95.615017] Pid: 4076, comm: Xorg Tainted: G        W  2.6.29-rc4-rt1-tip #1
[   95.615022] Call Trace:
[   95.615031]  [<ffffffff8027dfb0>] ? print_irqtrace_events+0xd0/0xe0
[   95.615038]  [<ffffffff8024cd73>] __might_sleep+0x113/0x130
[   95.615045]  [<ffffffff8077c811>] rt_spin_lock+0xa1/0xb0
[   95.615052]  [<ffffffff80296a3d>] res_counter_charge+0x5d/0x130
[   95.615059]  [<ffffffff802fb67f>] __mem_cgroup_try_charge+0x7f/0x180
[   95.615065]  [<ffffffff802fc407>] mem_cgroup_charge_common+0x57/0x90
[   95.615074]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[   95.615080]  [<ffffffff802fc49d>] mem_cgroup_newpage_charge+0x5d/0x60
[   95.615088]  [<ffffffff802dba37>] handle_mm_fault+0x387/0x890
[   95.615094]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[   95.615103]  [<ffffffff8023495e>] do_page_fault+0x11e/0x2a0
[   95.615109]  [<ffffffff8077e5a5>] page_fault+0x25/0x30
[   96.657001] BUG: sleeping function called from invalid context at kernel/rtmutex.c:683
[   96.657011] in_atomic(): 0, irqs_disabled(): 1, pid: 4682, name: npviewer.bin
[   96.657016] INFO: lockdep is turned off.
[   96.657020] irq event stamp: 0
[   96.657023] hardirqs last  enabled at (0): [<(null)>] (null)
[   96.657029] hardirqs last disabled at (0): [<ffffffff8025449d>] copy_process+0x68d/0x1500
[   96.657042] softirqs last  enabled at (0): [<ffffffff8025449d>] copy_process+0x68d/0x1500
[   96.657049] softirqs last disabled at (0): [<(null)>] (null)
[   96.657056] Pid: 4682, comm: npviewer.bin Tainted: G        W  2.6.29-rc4-rt1-tip #1
[   96.657061] Call Trace:
[   96.657071]  [<ffffffff8027dfb0>] ? print_irqtrace_events+0xd0/0xe0
[   96.657077]  [<ffffffff8024cd73>] __might_sleep+0x113/0x130
[   96.657085]  [<ffffffff8077c811>] rt_spin_lock+0xa1/0xb0
[   96.657091]  [<ffffffff80296a3d>] res_counter_charge+0x5d/0x130
[   96.657099]  [<ffffffff802fb67f>] __mem_cgroup_try_charge+0x7f/0x180
[   96.657105]  [<ffffffff802fc407>] mem_cgroup_charge_common+0x57/0x90
[   96.657113]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[   96.657119]  [<ffffffff802fc49d>] mem_cgroup_newpage_charge+0x5d/0x60
[   96.657127]  [<ffffffff802dba37>] handle_mm_fault+0x387/0x890
[   96.657133]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[   96.657140]  [<ffffffff8023495e>] do_page_fault+0x11e/0x2a0
[   96.657146]  [<ffffffff8077e5a5>] page_fault+0x25/0x30
[   96.657154]  [<ffffffff8043d6dd>] ? copy_user_generic_string+0x2d/0x40
[   96.657161]  [<ffffffff8031cb6a>] ? seq_read+0x2aa/0x370
[   96.657167]  [<ffffffff8031c8c0>] ? seq_read+0x0/0x370
[   96.657174]  [<ffffffff8034bf74>] proc_reg_read+0x84/0xc0
[   96.657180]  [<ffffffff802ffe18>] vfs_read+0xc8/0x190
[   96.657186]  [<ffffffff802fffe5>] sys_read+0x55/0x90
[   96.657193]  [<ffffffff8023cf5f>] sysenter_dispatch+0x7/0x33
[   96.657198]  [<ffffffff8077c2c0>] ? trace_hardirqs_on_thunk+0x3a/0x3f
[   97.670557] BUG: sleeping function called from invalid context at kernel/rtmutex.c:683
[   97.670566] in_atomic(): 0, irqs_disabled(): 1, pid: 4682, name: npviewer.bin
[   97.670570] INFO: lockdep is turned off.
[   97.670574] irq event stamp: 0
[   97.670577] hardirqs last  enabled at (0): [<(null)>] (null)
[   97.670583] hardirqs last disabled at (0): [<ffffffff8025449d>] copy_process+0x68d/0x1500
[   97.670595] softirqs last  enabled at (0): [<ffffffff8025449d>] copy_process+0x68d/0x1500
[   97.670602] softirqs last disabled at (0): [<(null)>] (null)
[   97.670609] Pid: 4682, comm: npviewer.bin Tainted: G        W  2.6.29-rc4-rt1-tip #1
[   97.670614] Call Trace:
[   97.670623]  [<ffffffff8027dfb0>] ? print_irqtrace_events+0xd0/0xe0
[   97.670630]  [<ffffffff8024cd73>] __might_sleep+0x113/0x130
[   97.670638]  [<ffffffff8077c811>] rt_spin_lock+0xa1/0xb0
[   97.670644]  [<ffffffff80296a3d>] res_counter_charge+0x5d/0x130
[   97.670652]  [<ffffffff802fb67f>] __mem_cgroup_try_charge+0x7f/0x180
[   97.670658]  [<ffffffff802fc407>] mem_cgroup_charge_common+0x57/0x90
[   97.670666]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[   97.670672]  [<ffffffff802fc753>] mem_cgroup_cache_charge+0xe3/0x140
[   97.670678]  [<ffffffff802c1497>] add_to_page_cache_locked+0x47/0xf0
[   97.670685]  [<ffffffff802c1571>] add_to_page_cache_lru+0x31/0x90
[   97.670690]  [<ffffffff802c166c>] grab_cache_page_write_begin+0x9c/0xc0
[   97.670697]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[   97.670704]  [<ffffffff8036b742>] reiserfs_write_begin+0x72/0x210
[   97.670710]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[   97.670716]  [<ffffffff802c22a0>] generic_file_buffered_write+0x130/0x300
[   97.670723]  [<ffffffff802c291d>] __generic_file_aio_write_nolock+0x26d/0x460
[   97.670730]  [<ffffffff802c351c>] generic_file_aio_write+0x6c/0xd0
[   97.670737]  [<ffffffff802feff9>] do_sync_write+0xf9/0x140
[   97.670744]  [<ffffffff8026f5f0>] ? autoremove_wake_function+0x0/0x40
[   97.670750]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[   97.670756]  [<ffffffff80370571>] reiserfs_file_write+0x31/0x70
[   97.670762]  [<ffffffff802ffb4b>] vfs_write+0xcb/0x190
[   97.670767]  [<ffffffff802ffd15>] sys_write+0x55/0x90
[   97.670775]  [<ffffffff8023cf5f>] sysenter_dispatch+0x7/0x33
[   97.670781]  [<ffffffff8077c2c0>] ? trace_hardirqs_on_thunk+0x3a/0x3f
[   98.670643] BUG: sleeping function called from invalid context at kernel/rtmutex.c:683
[   98.670652] in_atomic(): 0, irqs_disabled(): 1, pid: 4682, name: npviewer.bin
[   98.670657] INFO: lockdep is turned off.
[   98.670660] irq event stamp: 0
[   98.670664] hardirqs last  enabled at (0): [<(null)>] (null)
[   98.670669] hardirqs last disabled at (0): [<ffffffff8025449d>] copy_process+0x68d/0x1500
[   98.670681] softirqs last  enabled at (0): [<ffffffff8025449d>] copy_process+0x68d/0x1500
[   98.670689] softirqs last disabled at (0): [<(null)>] (null)
[   98.670696] Pid: 4682, comm: npviewer.bin Tainted: G        W  2.6.29-rc4-rt1-tip #1
[   98.670700] Call Trace:
[   98.670710]  [<ffffffff8027dfb0>] ? print_irqtrace_events+0xd0/0xe0
[   98.670716]  [<ffffffff8024cd73>] __might_sleep+0x113/0x130
[   98.670723]  [<ffffffff8077c811>] rt_spin_lock+0xa1/0xb0
[   98.670730]  [<ffffffff80296a3d>] res_counter_charge+0x5d/0x130
[   98.670738]  [<ffffffff802fb67f>] __mem_cgroup_try_charge+0x7f/0x180
[   98.670744]  [<ffffffff802fc407>] mem_cgroup_charge_common+0x57/0x90
[   98.670751]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[   98.670757]  [<ffffffff802fc753>] mem_cgroup_cache_charge+0xe3/0x140
[   98.670764]  [<ffffffff802c1497>] add_to_page_cache_locked+0x47/0xf0
[   98.670770]  [<ffffffff802c1571>] add_to_page_cache_lru+0x31/0x90
[   98.670776]  [<ffffffff802c166c>] grab_cache_page_write_begin+0x9c/0xc0
[   98.670782]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[   98.670790]  [<ffffffff8036b742>] reiserfs_write_begin+0x72/0x210
[   98.670796]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[   98.670802]  [<ffffffff802c22a0>] generic_file_buffered_write+0x130/0x300
[   98.670809]  [<ffffffff802c291d>] __generic_file_aio_write_nolock+0x26d/0x460
[   98.670816]  [<ffffffff802c351c>] generic_file_aio_write+0x6c/0xd0
[   98.670823]  [<ffffffff802feff9>] do_sync_write+0xf9/0x140
[   98.670830]  [<ffffffff8026f5f0>] ? autoremove_wake_function+0x0/0x40
[   98.670836]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[   98.670842]  [<ffffffff80370571>] reiserfs_file_write+0x31/0x70
[   98.670848]  [<ffffffff802ffb4b>] vfs_write+0xcb/0x190
[   98.670853]  [<ffffffff802ffd15>] sys_write+0x55/0x90
[   98.670861]  [<ffffffff8023cf5f>] sysenter_dispatch+0x7/0x33
[   98.670866]  [<ffffffff8077c2c0>] ? trace_hardirqs_on_thunk+0x3a/0x3f
[   99.707188] BUG: sleeping function called from invalid context at kernel/rtmutex.c:683
[   99.707197] in_atomic(): 0, irqs_disabled(): 1, pid: 4682, name: npviewer.bin
[   99.707202] INFO: lockdep is turned off.
[   99.707206] irq event stamp: 0
[   99.707209] hardirqs last  enabled at (0): [<(null)>] (null)
[   99.707215] hardirqs last disabled at (0): [<ffffffff8025449d>] copy_process+0x68d/0x1500
[   99.707226] softirqs last  enabled at (0): [<ffffffff8025449d>] copy_process+0x68d/0x1500
[   99.707234] softirqs last disabled at (0): [<(null)>] (null)
[   99.707241] Pid: 4682, comm: npviewer.bin Tainted: G        W  2.6.29-rc4-rt1-tip #1
[   99.707245] Call Trace:
[   99.707254]  [<ffffffff8027dfb0>] ? print_irqtrace_events+0xd0/0xe0
[   99.707261]  [<ffffffff8024cd73>] __might_sleep+0x113/0x130
[   99.707268]  [<ffffffff8077c811>] rt_spin_lock+0xa1/0xb0
[   99.707275]  [<ffffffff80296a3d>] res_counter_charge+0x5d/0x130
[   99.707283]  [<ffffffff802fb67f>] __mem_cgroup_try_charge+0x7f/0x180
[   99.707289]  [<ffffffff802fc407>] mem_cgroup_charge_common+0x57/0x90
[   99.707297]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[   99.707302]  [<ffffffff802fc753>] mem_cgroup_cache_charge+0xe3/0x140
[   99.707309]  [<ffffffff802c1497>] add_to_page_cache_locked+0x47/0xf0
[   99.707315]  [<ffffffff802c1571>] add_to_page_cache_lru+0x31/0x90
[   99.707321]  [<ffffffff802c166c>] grab_cache_page_write_begin+0x9c/0xc0
[   99.707327]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[   99.707335]  [<ffffffff8036b742>] reiserfs_write_begin+0x72/0x210
[   99.707341]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[   99.707347]  [<ffffffff802c22a0>] generic_file_buffered_write+0x130/0x300
[   99.707354]  [<ffffffff802c291d>] __generic_file_aio_write_nolock+0x26d/0x460
[   99.707361]  [<ffffffff802c351c>] generic_file_aio_write+0x6c/0xd0
[   99.707367]  [<ffffffff802feff9>] do_sync_write+0xf9/0x140
[   99.707374]  [<ffffffff8026f5f0>] ? autoremove_wake_function+0x0/0x40
[   99.707381]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[   99.707386]  [<ffffffff80370571>] reiserfs_file_write+0x31/0x70
[   99.707392]  [<ffffffff802ffb4b>] vfs_write+0xcb/0x190
[   99.707398]  [<ffffffff802ffd15>] sys_write+0x55/0x90
[   99.707406]  [<ffffffff8023cf5f>] sysenter_dispatch+0x7/0x33
[   99.707411]  [<ffffffff8077c2c0>] ? trace_hardirqs_on_thunk+0x3a/0x3f
[  100.712941] BUG: sleeping function called from invalid context at kernel/rtmutex.c:683
[  100.712950] in_atomic(): 0, irqs_disabled(): 1, pid: 4682, name: npviewer.bin
[  100.712955] INFO: lockdep is turned off.
[  100.712959] irq event stamp: 0
[  100.712962] hardirqs last  enabled at (0): [<(null)>] (null)
[  100.712968] hardirqs last disabled at (0): [<ffffffff8025449d>] copy_process+0x68d/0x1500
[  100.712980] softirqs last  enabled at (0): [<ffffffff8025449d>] copy_process+0x68d/0x1500
[  100.712987] softirqs last disabled at (0): [<(null)>] (null)
[  100.712994] Pid: 4682, comm: npviewer.bin Tainted: G        W  2.6.29-rc4-rt1-tip #1
[  100.712999] Call Trace:
[  100.713008]  [<ffffffff8027dfb0>] ? print_irqtrace_events+0xd0/0xe0
[  100.713015]  [<ffffffff8024cd73>] __might_sleep+0x113/0x130
[  100.713023]  [<ffffffff8077c811>] rt_spin_lock+0xa1/0xb0
[  100.713030]  [<ffffffff80296a3d>] res_counter_charge+0x5d/0x130
[  100.713038]  [<ffffffff802fb67f>] __mem_cgroup_try_charge+0x7f/0x180
[  100.713044]  [<ffffffff802fc407>] mem_cgroup_charge_common+0x57/0x90
[  100.713052]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[  100.713058]  [<ffffffff802fc753>] mem_cgroup_cache_charge+0xe3/0x140
[  100.713066]  [<ffffffff802c1497>] add_to_page_cache_locked+0x47/0xf0
[  100.713072]  [<ffffffff802c1571>] add_to_page_cache_lru+0x31/0x90
[  100.713078]  [<ffffffff802c166c>] grab_cache_page_write_begin+0x9c/0xc0
[  100.713084]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[  100.713092]  [<ffffffff8036b742>] reiserfs_write_begin+0x72/0x210
[  100.713098]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[  100.713104]  [<ffffffff802c22a0>] generic_file_buffered_write+0x130/0x300
[  100.713112]  [<ffffffff802c291d>] __generic_file_aio_write_nolock+0x26d/0x460
[  100.713118]  [<ffffffff802c351c>] generic_file_aio_write+0x6c/0xd0
[  100.713125]  [<ffffffff802feff9>] do_sync_write+0xf9/0x140
[  100.713132]  [<ffffffff8026f5f0>] ? autoremove_wake_function+0x0/0x40
[  100.713139]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[  100.713145]  [<ffffffff80370571>] reiserfs_file_write+0x31/0x70
[  100.713151]  [<ffffffff802ffb4b>] vfs_write+0xcb/0x190
[  100.713157]  [<ffffffff802ffd15>] sys_write+0x55/0x90
[  100.713164]  [<ffffffff8023cf5f>] sysenter_dispatch+0x7/0x33
[  100.713170]  [<ffffffff8077c2c0>] ? trace_hardirqs_on_thunk+0x3a/0x3f
[  101.714983] BUG: sleeping function called from invalid context at kernel/rtmutex.c:683
[  101.714992] in_atomic(): 0, irqs_disabled(): 1, pid: 4682, name: npviewer.bin
[  101.714997] INFO: lockdep is turned off.
[  101.715001] irq event stamp: 0
[  101.715004] hardirqs last  enabled at (0): [<(null)>] (null)
[  101.715010] hardirqs last disabled at (0): [<ffffffff8025449d>] copy_process+0x68d/0x1500
[  101.715022] softirqs last  enabled at (0): [<ffffffff8025449d>] copy_process+0x68d/0x1500
[  101.715029] softirqs last disabled at (0): [<(null)>] (null)
[  101.715036] Pid: 4682, comm: npviewer.bin Tainted: G        W  2.6.29-rc4-rt1-tip #1
[  101.715041] Call Trace:
[  101.715050]  [<ffffffff8027dfb0>] ? print_irqtrace_events+0xd0/0xe0
[  101.715057]  [<ffffffff8024cd73>] __might_sleep+0x113/0x130
[  101.715064]  [<ffffffff8077c811>] rt_spin_lock+0xa1/0xb0
[  101.715071]  [<ffffffff80296a3d>] res_counter_charge+0x5d/0x130
[  101.715080]  [<ffffffff802fb67f>] __mem_cgroup_try_charge+0x7f/0x180
[  101.715086]  [<ffffffff802fc407>] mem_cgroup_charge_common+0x57/0x90
[  101.715094]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[  101.715100]  [<ffffffff802fc753>] mem_cgroup_cache_charge+0xe3/0x140
[  101.715107]  [<ffffffff802c1497>] add_to_page_cache_locked+0x47/0xf0
[  101.715113]  [<ffffffff802c1571>] add_to_page_cache_lru+0x31/0x90
[  101.715119]  [<ffffffff802c166c>] grab_cache_page_write_begin+0x9c/0xc0
[  101.715125]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[  101.715134]  [<ffffffff8036b742>] reiserfs_write_begin+0x72/0x210
[  101.715140]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[  101.715146]  [<ffffffff802c22a0>] generic_file_buffered_write+0x130/0x300
[  101.715153]  [<ffffffff802c291d>] __generic_file_aio_write_nolock+0x26d/0x460
[  101.715160]  [<ffffffff802c351c>] generic_file_aio_write+0x6c/0xd0
[  101.715167]  [<ffffffff802feff9>] do_sync_write+0xf9/0x140
[  101.715174]  [<ffffffff8026f5f0>] ? autoremove_wake_function+0x0/0x40
[  101.715180]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[  101.715187]  [<ffffffff80370571>] reiserfs_file_write+0x31/0x70
[  101.715192]  [<ffffffff802ffb4b>] vfs_write+0xcb/0x190
[  101.715198]  [<ffffffff802ffd15>] sys_write+0x55/0x90
[  101.715206]  [<ffffffff8023cf5f>] sysenter_dispatch+0x7/0x33
[  101.715212]  [<ffffffff8077c2c0>] ? trace_hardirqs_on_thunk+0x3a/0x3f
[  102.714789] BUG: sleeping function called from invalid context at kernel/rtmutex.c:683
[  102.714798] in_atomic(): 0, irqs_disabled(): 1, pid: 4682, name: npviewer.bin
[  102.714803] INFO: lockdep is turned off.
[  102.714807] irq event stamp: 0
[  102.714810] hardirqs last  enabled at (0): [<(null)>] (null)
[  102.714816] hardirqs last disabled at (0): [<ffffffff8025449d>] copy_process+0x68d/0x1500
[  102.714828] softirqs last  enabled at (0): [<ffffffff8025449d>] copy_process+0x68d/0x1500
[  102.714835] softirqs last disabled at (0): [<(null)>] (null)
[  102.714842] Pid: 4682, comm: npviewer.bin Tainted: G        W  2.6.29-rc4-rt1-tip #1
[  102.714847] Call Trace:
[  102.714856]  [<ffffffff8027dfb0>] ? print_irqtrace_events+0xd0/0xe0
[  102.714863]  [<ffffffff8024cd73>] __might_sleep+0x113/0x130
[  102.714870]  [<ffffffff8077c811>] rt_spin_lock+0xa1/0xb0
[  102.714877]  [<ffffffff80296a3d>] res_counter_charge+0x5d/0x130
[  102.714885]  [<ffffffff802fb67f>] __mem_cgroup_try_charge+0x7f/0x180
[  102.714891]  [<ffffffff802fc407>] mem_cgroup_charge_common+0x57/0x90
[  102.714899]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[  102.714905]  [<ffffffff802fc753>] mem_cgroup_cache_charge+0xe3/0x140
[  102.714912]  [<ffffffff802c1497>] add_to_page_cache_locked+0x47/0xf0
[  102.714918]  [<ffffffff802c1571>] add_to_page_cache_lru+0x31/0x90
[  102.714924]  [<ffffffff802c166c>] grab_cache_page_write_begin+0x9c/0xc0
[  102.714930]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[  102.714938]  [<ffffffff8036b742>] reiserfs_write_begin+0x72/0x210
[  102.714944]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[  102.714950]  [<ffffffff802c22a0>] generic_file_buffered_write+0x130/0x300
[  102.714957]  [<ffffffff802c291d>] __generic_file_aio_write_nolock+0x26d/0x460
[  102.714964]  [<ffffffff802c351c>] generic_file_aio_write+0x6c/0xd0
[  102.714971]  [<ffffffff802feff9>] do_sync_write+0xf9/0x140
[  102.714978]  [<ffffffff8026f5f0>] ? autoremove_wake_function+0x0/0x40
[  102.714985]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[  102.714991]  [<ffffffff80370571>] reiserfs_file_write+0x31/0x70
[  102.714997]  [<ffffffff802ffb4b>] vfs_write+0xcb/0x190
[  102.715002]  [<ffffffff802ffd15>] sys_write+0x55/0x90
[  102.715010]  [<ffffffff8023cf5f>] sysenter_dispatch+0x7/0x33
[  102.715016]  [<ffffffff8077c2c0>] ? trace_hardirqs_on_thunk+0x3a/0x3f
[  103.715104] BUG: sleeping function called from invalid context at kernel/rtmutex.c:683
[  103.715113] in_atomic(): 0, irqs_disabled(): 1, pid: 4682, name: npviewer.bin
[  103.715118] INFO: lockdep is turned off.
[  103.715122] irq event stamp: 0
[  103.715125] hardirqs last  enabled at (0): [<(null)>] (null)
[  103.715130] hardirqs last disabled at (0): [<ffffffff8025449d>] copy_process+0x68d/0x1500
[  103.715143] softirqs last  enabled at (0): [<ffffffff8025449d>] copy_process+0x68d/0x1500
[  103.715150] softirqs last disabled at (0): [<(null)>] (null)
[  103.715157] Pid: 4682, comm: npviewer.bin Tainted: G        W  2.6.29-rc4-rt1-tip #1
[  103.715162] Call Trace:
[  103.715171]  [<ffffffff8027dfb0>] ? print_irqtrace_events+0xd0/0xe0
[  103.715177]  [<ffffffff8024cd73>] __might_sleep+0x113/0x130
[  103.715185]  [<ffffffff8077c811>] rt_spin_lock+0xa1/0xb0
[  103.715192]  [<ffffffff80296a3d>] res_counter_charge+0x5d/0x130
[  103.715199]  [<ffffffff802fb67f>] __mem_cgroup_try_charge+0x7f/0x180
[  103.715206]  [<ffffffff802fc407>] mem_cgroup_charge_common+0x57/0x90
[  103.715213]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[  103.715219]  [<ffffffff802fc753>] mem_cgroup_cache_charge+0xe3/0x140
[  103.715226]  [<ffffffff802c1497>] add_to_page_cache_locked+0x47/0xf0
[  103.715233]  [<ffffffff802c1571>] add_to_page_cache_lru+0x31/0x90
[  103.715239]  [<ffffffff802c166c>] grab_cache_page_write_begin+0x9c/0xc0
[  103.715245]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[  103.715252]  [<ffffffff8036b742>] reiserfs_write_begin+0x72/0x210
[  103.715258]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[  103.715265]  [<ffffffff802c22a0>] generic_file_buffered_write+0x130/0x300
[  103.715272]  [<ffffffff802c291d>] __generic_file_aio_write_nolock+0x26d/0x460
[  103.715279]  [<ffffffff802c351c>] generic_file_aio_write+0x6c/0xd0
[  103.715285]  [<ffffffff802feff9>] do_sync_write+0xf9/0x140
[  103.715293]  [<ffffffff8026f5f0>] ? autoremove_wake_function+0x0/0x40
[  103.715299]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[  103.715305]  [<ffffffff80370571>] reiserfs_file_write+0x31/0x70
[  103.715311]  [<ffffffff802ffb4b>] vfs_write+0xcb/0x190
[  103.715317]  [<ffffffff802ffd15>] sys_write+0x55/0x90
[  103.715325]  [<ffffffff8023cf5f>] sysenter_dispatch+0x7/0x33
[  103.715331]  [<ffffffff8077c2c0>] ? trace_hardirqs_on_thunk+0x3a/0x3f
[  104.738641] BUG: sleeping function called from invalid context at kernel/rtmutex.c:683
[  104.738650] in_atomic(): 0, irqs_disabled(): 1, pid: 4682, name: npviewer.bin
[  104.738655] INFO: lockdep is turned off.
[  104.738659] irq event stamp: 0
[  104.738662] hardirqs last  enabled at (0): [<(null)>] (null)
[  104.738668] hardirqs last disabled at (0): [<ffffffff8025449d>] copy_process+0x68d/0x1500
[  104.738680] softirqs last  enabled at (0): [<ffffffff8025449d>] copy_process+0x68d/0x1500
[  104.738687] softirqs last disabled at (0): [<(null)>] (null)
[  104.738694] Pid: 4682, comm: npviewer.bin Tainted: G        W  2.6.29-rc4-rt1-tip #1
[  104.738699] Call Trace:
[  104.738708]  [<ffffffff8027dfb0>] ? print_irqtrace_events+0xd0/0xe0
[  104.738715]  [<ffffffff8024cd73>] __might_sleep+0x113/0x130
[  104.738723]  [<ffffffff8077c811>] rt_spin_lock+0xa1/0xb0
[  104.738729]  [<ffffffff80296a3d>] res_counter_charge+0x5d/0x130
[  104.738737]  [<ffffffff802fb67f>] __mem_cgroup_try_charge+0x7f/0x180
[  104.738743]  [<ffffffff802fc407>] mem_cgroup_charge_common+0x57/0x90
[  104.738751]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[  104.738757]  [<ffffffff802fc753>] mem_cgroup_cache_charge+0xe3/0x140
[  104.738764]  [<ffffffff802c1497>] add_to_page_cache_locked+0x47/0xf0
[  104.738770]  [<ffffffff802c1571>] add_to_page_cache_lru+0x31/0x90
[  104.738776]  [<ffffffff802c166c>] grab_cache_page_write_begin+0x9c/0xc0
[  104.738783]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[  104.738790]  [<ffffffff8036b742>] reiserfs_write_begin+0x72/0x210
[  104.738796]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[  104.738802]  [<ffffffff802c22a0>] generic_file_buffered_write+0x130/0x300
[  104.738810]  [<ffffffff802c291d>] __generic_file_aio_write_nolock+0x26d/0x460
[  104.738817]  [<ffffffff802c351c>] generic_file_aio_write+0x6c/0xd0
[  104.738823]  [<ffffffff802feff9>] do_sync_write+0xf9/0x140
[  104.738830]  [<ffffffff8026f5f0>] ? autoremove_wake_function+0x0/0x40
[  104.738837]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[  104.738843]  [<ffffffff80370571>] reiserfs_file_write+0x31/0x70
[  104.738849]  [<ffffffff802ffb4b>] vfs_write+0xcb/0x190
[  104.738855]  [<ffffffff802ffd15>] sys_write+0x55/0x90
[  104.738862]  [<ffffffff8023cf5f>] sysenter_dispatch+0x7/0x33
[  104.738868]  [<ffffffff8077c2c0>] ? trace_hardirqs_on_thunk+0x3a/0x3f
[  105.743379] BUG: sleeping function called from invalid context at kernel/rtmutex.c:683
[  105.743388] in_atomic(): 0, irqs_disabled(): 1, pid: 4682, name: npviewer.bin
[  105.743393] INFO: lockdep is turned off.
[  105.743397] irq event stamp: 0
[  105.743400] hardirqs last  enabled at (0): [<(null)>] (null)
[  105.743406] hardirqs last disabled at (0): [<ffffffff8025449d>] copy_process+0x68d/0x1500
[  105.743417] softirqs last  enabled at (0): [<ffffffff8025449d>] copy_process+0x68d/0x1500
[  105.743425] softirqs last disabled at (0): [<(null)>] (null)
[  105.743432] Pid: 4682, comm: npviewer.bin Tainted: G        W  2.6.29-rc4-rt1-tip #1
[  105.743437] Call Trace:
[  105.743446]  [<ffffffff8027dfb0>] ? print_irqtrace_events+0xd0/0xe0
[  105.743452]  [<ffffffff8024cd73>] __might_sleep+0x113/0x130
[  105.743460]  [<ffffffff8077c811>] rt_spin_lock+0xa1/0xb0
[  105.743467]  [<ffffffff80296a3d>] res_counter_charge+0x5d/0x130
[  105.743474]  [<ffffffff802fb67f>] __mem_cgroup_try_charge+0x7f/0x180
[  105.743480]  [<ffffffff802fc407>] mem_cgroup_charge_common+0x57/0x90
[  105.743488]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[  105.743494]  [<ffffffff802fc753>] mem_cgroup_cache_charge+0xe3/0x140
[  105.743501]  [<ffffffff802c1497>] add_to_page_cache_locked+0x47/0xf0
[  105.743507]  [<ffffffff802c1571>] add_to_page_cache_lru+0x31/0x90
[  105.743513]  [<ffffffff802c166c>] grab_cache_page_write_begin+0x9c/0xc0
[  105.743520]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[  105.743527]  [<ffffffff8036b742>] reiserfs_write_begin+0x72/0x210
[  105.743533]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[  105.743540]  [<ffffffff802c22a0>] generic_file_buffered_write+0x130/0x300
[  105.743547]  [<ffffffff802c291d>] __generic_file_aio_write_nolock+0x26d/0x460
[  105.743554]  [<ffffffff802c351c>] generic_file_aio_write+0x6c/0xd0
[  105.743560]  [<ffffffff802feff9>] do_sync_write+0xf9/0x140
[  105.743567]  [<ffffffff8026f5f0>] ? autoremove_wake_function+0x0/0x40
[  105.743574]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[  105.743580]  [<ffffffff80370571>] reiserfs_file_write+0x31/0x70
[  105.743586]  [<ffffffff802ffb4b>] vfs_write+0xcb/0x190
[  105.743592]  [<ffffffff802ffd15>] sys_write+0x55/0x90
[  105.743599]  [<ffffffff8023cf5f>] sysenter_dispatch+0x7/0x33
[  105.743605]  [<ffffffff8077c2c0>] ? trace_hardirqs_on_thunk+0x3a/0x3f
[  106.750202] BUG: sleeping function called from invalid context at kernel/rtmutex.c:683
[  106.750211] in_atomic(): 0, irqs_disabled(): 1, pid: 4682, name: npviewer.bin
[  106.750216] INFO: lockdep is turned off.
[  106.750220] irq event stamp: 0
[  106.750223] hardirqs last  enabled at (0): [<(null)>] (null)
[  106.750229] hardirqs last disabled at (0): [<ffffffff8025449d>] copy_process+0x68d/0x1500
[  106.750241] softirqs last  enabled at (0): [<ffffffff8025449d>] copy_process+0x68d/0x1500
[  106.750248] softirqs last disabled at (0): [<(null)>] (null)
[  106.750255] Pid: 4682, comm: npviewer.bin Tainted: G        W  2.6.29-rc4-rt1-tip #1
[  106.750260] Call Trace:
[  106.750269]  [<ffffffff8027dfb0>] ? print_irqtrace_events+0xd0/0xe0
[  106.750275]  [<ffffffff8024cd73>] __might_sleep+0x113/0x130
[  106.750283]  [<ffffffff8077c811>] rt_spin_lock+0xa1/0xb0
[  106.750290]  [<ffffffff80296a3d>] res_counter_charge+0x5d/0x130
[  106.750297]  [<ffffffff802fb67f>] __mem_cgroup_try_charge+0x7f/0x180
[  106.750304]  [<ffffffff802fc407>] mem_cgroup_charge_common+0x57/0x90
[  106.750311]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[  106.750317]  [<ffffffff802fc753>] mem_cgroup_cache_charge+0xe3/0x140
[  106.750324]  [<ffffffff802c1497>] add_to_page_cache_locked+0x47/0xf0
[  106.750331]  [<ffffffff802c1571>] add_to_page_cache_lru+0x31/0x90
[  106.750337]  [<ffffffff802c166c>] grab_cache_page_write_begin+0x9c/0xc0
[  106.750343]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[  106.750350]  [<ffffffff8036b742>] reiserfs_write_begin+0x72/0x210
[  106.750357]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[  106.750363]  [<ffffffff802c22a0>] generic_file_buffered_write+0x130/0x300
[  106.750370]  [<ffffffff802c291d>] __generic_file_aio_write_nolock+0x26d/0x460
[  106.750377]  [<ffffffff802c351c>] generic_file_aio_write+0x6c/0xd0
[  106.750383]  [<ffffffff802feff9>] do_sync_write+0xf9/0x140
[  106.750391]  [<ffffffff8026f5f0>] ? autoremove_wake_function+0x0/0x40
[  106.750397]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[  106.750403]  [<ffffffff80370571>] reiserfs_file_write+0x31/0x70
[  106.750409]  [<ffffffff802ffb4b>] vfs_write+0xcb/0x190
[  106.750415]  [<ffffffff802ffd15>] sys_write+0x55/0x90
[  106.750423]  [<ffffffff8023cf5f>] sysenter_dispatch+0x7/0x33
[  106.750429]  [<ffffffff8077c2c0>] ? trace_hardirqs_on_thunk+0x3a/0x3f
[  107.753607] BUG: sleeping function called from invalid context at kernel/rtmutex.c:683
[  107.753616] in_atomic(): 0, irqs_disabled(): 1, pid: 4682, name: npviewer.bin
[  107.753621] INFO: lockdep is turned off.
[  107.753624] irq event stamp: 0
[  107.753628] hardirqs last  enabled at (0): [<(null)>] (null)
[  107.753634] hardirqs last disabled at (0): [<ffffffff8025449d>] copy_process+0x68d/0x1500
[  107.753645] softirqs last  enabled at (0): [<ffffffff8025449d>] copy_process+0x68d/0x1500
[  107.753653] softirqs last disabled at (0): [<(null)>] (null)
[  107.753660] Pid: 4682, comm: npviewer.bin Tainted: G        W  2.6.29-rc4-rt1-tip #1
[  107.753665] Call Trace:
[  107.753674]  [<ffffffff8027dfb0>] ? print_irqtrace_events+0xd0/0xe0
[  107.753681]  [<ffffffff8024cd73>] __might_sleep+0x113/0x130
[  107.753688]  [<ffffffff8077c811>] rt_spin_lock+0xa1/0xb0
[  107.753695]  [<ffffffff80296a3d>] res_counter_charge+0x5d/0x130
[  107.753703]  [<ffffffff802fb67f>] __mem_cgroup_try_charge+0x7f/0x180
[  107.753709]  [<ffffffff802fc407>] mem_cgroup_charge_common+0x57/0x90
[  107.753717]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[  107.753723]  [<ffffffff802fc753>] mem_cgroup_cache_charge+0xe3/0x140
[  107.753730]  [<ffffffff802c1497>] add_to_page_cache_locked+0x47/0xf0
[  107.753736]  [<ffffffff802c1571>] add_to_page_cache_lru+0x31/0x90
[  107.753742]  [<ffffffff802c166c>] grab_cache_page_write_begin+0x9c/0xc0
[  107.753748]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[  107.753756]  [<ffffffff8036b742>] reiserfs_write_begin+0x72/0x210
[  107.753762]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[  107.753768]  [<ffffffff802c22a0>] generic_file_buffered_write+0x130/0x300
[  107.753775]  [<ffffffff802c291d>] __generic_file_aio_write_nolock+0x26d/0x460
[  107.753782]  [<ffffffff802c351c>] generic_file_aio_write+0x6c/0xd0
[  107.753789]  [<ffffffff802feff9>] do_sync_write+0xf9/0x140
[  107.753796]  [<ffffffff8026f5f0>] ? autoremove_wake_function+0x0/0x40
[  107.753803]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[  107.753809]  [<ffffffff80370571>] reiserfs_file_write+0x31/0x70
[  107.753815]  [<ffffffff802ffb4b>] vfs_write+0xcb/0x190
[  107.753821]  [<ffffffff802ffd15>] sys_write+0x55/0x90
[  107.753828]  [<ffffffff8023cf5f>] sysenter_dispatch+0x7/0x33
[  107.753834]  [<ffffffff8077c2c0>] ? trace_hardirqs_on_thunk+0x3a/0x3f
[  108.755818] BUG: sleeping function called from invalid context at kernel/rtmutex.c:683
[  108.755827] in_atomic(): 0, irqs_disabled(): 1, pid: 4682, name: npviewer.bin
[  108.755831] INFO: lockdep is turned off.
[  108.755835] irq event stamp: 0
[  108.755839] hardirqs last  enabled at (0): [<(null)>] (null)
[  108.755844] hardirqs last disabled at (0): [<ffffffff8025449d>] copy_process+0x68d/0x1500
[  108.755856] softirqs last  enabled at (0): [<ffffffff8025449d>] copy_process+0x68d/0x1500
[  108.755863] softirqs last disabled at (0): [<(null)>] (null)
[  108.755870] Pid: 4682, comm: npviewer.bin Tainted: G        W  2.6.29-rc4-rt1-tip #1
[  108.755875] Call Trace:
[  108.755884]  [<ffffffff8027dfb0>] ? print_irqtrace_events+0xd0/0xe0
[  108.755890]  [<ffffffff8024cd73>] __might_sleep+0x113/0x130
[  108.755898]  [<ffffffff8077c811>] rt_spin_lock+0xa1/0xb0
[  108.755905]  [<ffffffff80296a3d>] res_counter_charge+0x5d/0x130
[  108.755912]  [<ffffffff802fb67f>] __mem_cgroup_try_charge+0x7f/0x180
[  108.755919]  [<ffffffff802fc407>] mem_cgroup_charge_common+0x57/0x90
[  108.755927]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[  108.755933]  [<ffffffff802fc753>] mem_cgroup_cache_charge+0xe3/0x140
[  108.755940]  [<ffffffff802c1497>] add_to_page_cache_locked+0x47/0xf0
[  108.755946]  [<ffffffff802c1571>] add_to_page_cache_lru+0x31/0x90
[  108.755952]  [<ffffffff802c166c>] grab_cache_page_write_begin+0x9c/0xc0
[  108.755958]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[  108.755966]  [<ffffffff8036b742>] reiserfs_write_begin+0x72/0x210
[  108.755972]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[  108.755978]  [<ffffffff802c22a0>] generic_file_buffered_write+0x130/0x300
[  108.755985]  [<ffffffff802c291d>] __generic_file_aio_write_nolock+0x26d/0x460
[  108.755992]  [<ffffffff802c351c>] generic_file_aio_write+0x6c/0xd0
[  108.755999]  [<ffffffff802feff9>] do_sync_write+0xf9/0x140
[  108.756006]  [<ffffffff8026f5f0>] ? autoremove_wake_function+0x0/0x40
[  108.756013]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[  108.756019]  [<ffffffff80370571>] reiserfs_file_write+0x31/0x70
[  108.756025]  [<ffffffff802ffb4b>] vfs_write+0xcb/0x190
[  108.756031]  [<ffffffff802ffd15>] sys_write+0x55/0x90
[  108.756038]  [<ffffffff8023cf5f>] sysenter_dispatch+0x7/0x33
[  108.756044]  [<ffffffff8077c2c0>] ? trace_hardirqs_on_thunk+0x3a/0x3f
[  109.775203] BUG: sleeping function called from invalid context at kernel/rtmutex.c:683
[  109.775211] in_atomic(): 0, irqs_disabled(): 1, pid: 4682, name: npviewer.bin
[  109.775216] INFO: lockdep is turned off.
[  109.775220] irq event stamp: 0
[  109.775223] hardirqs last  enabled at (0): [<(null)>] (null)
[  109.775229] hardirqs last disabled at (0): [<ffffffff8025449d>] copy_process+0x68d/0x1500
[  109.775241] softirqs last  enabled at (0): [<ffffffff8025449d>] copy_process+0x68d/0x1500
[  109.775248] softirqs last disabled at (0): [<(null)>] (null)
[  109.775255] Pid: 4682, comm: npviewer.bin Tainted: G        W  2.6.29-rc4-rt1-tip #1
[  109.775260] Call Trace:
[  109.775270]  [<ffffffff8027dfb0>] ? print_irqtrace_events+0xd0/0xe0
[  109.775277]  [<ffffffff8024cd73>] __might_sleep+0x113/0x130
[  109.775284]  [<ffffffff8077c811>] rt_spin_lock+0xa1/0xb0
[  109.775291]  [<ffffffff80296a3d>] res_counter_charge+0x5d/0x130
[  109.775298]  [<ffffffff802fb67f>] __mem_cgroup_try_charge+0x7f/0x180
[  109.775305]  [<ffffffff802fc407>] mem_cgroup_charge_common+0x57/0x90
[  109.775312]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[  109.775319]  [<ffffffff802fc753>] mem_cgroup_cache_charge+0xe3/0x140
[  109.775326]  [<ffffffff802c1497>] add_to_page_cache_locked+0x47/0xf0
[  109.775332]  [<ffffffff802c1571>] add_to_page_cache_lru+0x31/0x90
[  109.775338]  [<ffffffff802c166c>] grab_cache_page_write_begin+0x9c/0xc0
[  109.775344]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[  109.775352]  [<ffffffff8036b742>] reiserfs_write_begin+0x72/0x210
[  109.775358]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[  109.775364]  [<ffffffff802c22a0>] generic_file_buffered_write+0x130/0x300
[  109.775371]  [<ffffffff802c291d>] __generic_file_aio_write_nolock+0x26d/0x460
[  109.775378]  [<ffffffff802c351c>] generic_file_aio_write+0x6c/0xd0
[  109.775384]  [<ffffffff802feff9>] do_sync_write+0xf9/0x140
[  109.775392]  [<ffffffff8026f5f0>] ? autoremove_wake_function+0x0/0x40
[  109.775398]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[  109.775404]  [<ffffffff80370571>] reiserfs_file_write+0x31/0x70
[  109.775410]  [<ffffffff802ffb4b>] vfs_write+0xcb/0x190
[  109.775416]  [<ffffffff802ffd15>] sys_write+0x55/0x90
[  109.775423]  [<ffffffff8023cf5f>] sysenter_dispatch+0x7/0x33
[  109.775429]  [<ffffffff8077c2c0>] ? trace_hardirqs_on_thunk+0x3a/0x3f
[  110.789131] BUG: sleeping function called from invalid context at kernel/rtmutex.c:683
[  110.789140] in_atomic(): 0, irqs_disabled(): 1, pid: 4682, name: npviewer.bin
[  110.789145] INFO: lockdep is turned off.
[  110.789149] irq event stamp: 0
[  110.789152] hardirqs last  enabled at (0): [<(null)>] (null)
[  110.789158] hardirqs last disabled at (0): [<ffffffff8025449d>] copy_process+0x68d/0x1500
[  110.789170] softirqs last  enabled at (0): [<ffffffff8025449d>] copy_process+0x68d/0x1500
[  110.789177] softirqs last disabled at (0): [<(null)>] (null)
[  110.789184] Pid: 4682, comm: npviewer.bin Tainted: G        W  2.6.29-rc4-rt1-tip #1
[  110.789189] Call Trace:
[  110.789198]  [<ffffffff8027dfb0>] ? print_irqtrace_events+0xd0/0xe0
[  110.789205]  [<ffffffff8024cd73>] __might_sleep+0x113/0x130
[  110.789212]  [<ffffffff8077c811>] rt_spin_lock+0xa1/0xb0
[  110.789219]  [<ffffffff80296a3d>] res_counter_charge+0x5d/0x130
[  110.789227]  [<ffffffff802fb67f>] __mem_cgroup_try_charge+0x7f/0x180
[  110.789233]  [<ffffffff802fc407>] mem_cgroup_charge_common+0x57/0x90
[  110.789241]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[  110.789247]  [<ffffffff802fc753>] mem_cgroup_cache_charge+0xe3/0x140
[  110.789254]  [<ffffffff802c1497>] add_to_page_cache_locked+0x47/0xf0
[  110.789260]  [<ffffffff802c1571>] add_to_page_cache_lru+0x31/0x90
[  110.789266]  [<ffffffff802c166c>] grab_cache_page_write_begin+0x9c/0xc0
[  110.789273]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[  110.789280]  [<ffffffff8036b742>] reiserfs_write_begin+0x72/0x210
[  110.789286]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[  110.789292]  [<ffffffff802c22a0>] generic_file_buffered_write+0x130/0x300
[  110.789300]  [<ffffffff802c291d>] __generic_file_aio_write_nolock+0x26d/0x460
[  110.789306]  [<ffffffff802c351c>] generic_file_aio_write+0x6c/0xd0
[  110.789313]  [<ffffffff802feff9>] do_sync_write+0xf9/0x140
[  110.789320]  [<ffffffff8026f5f0>] ? autoremove_wake_function+0x0/0x40
[  110.789327]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[  110.789333]  [<ffffffff80370571>] reiserfs_file_write+0x31/0x70
[  110.789339]  [<ffffffff802ffb4b>] vfs_write+0xcb/0x190
[  110.789345]  [<ffffffff802ffd15>] sys_write+0x55/0x90
[  110.789352]  [<ffffffff8023cf5f>] sysenter_dispatch+0x7/0x33
[  110.789358]  [<ffffffff8077c2c0>] ? trace_hardirqs_on_thunk+0x3a/0x3f

[-- Attachment #3: config-bad --]
[-- Type: text/plain, Size: 47590 bytes --]

#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.29-rc4-rt1
# Thu Feb 12 01:05:56 2009
#
CONFIG_64BIT=y
# CONFIG_X86_32 is not set
CONFIG_X86_64=y
CONFIG_X86=y
CONFIG_ARCH_DEFCONFIG="arch/x86/configs/x86_64_defconfig"
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_CLOCKSOURCE_WATCHDOG=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_FAST_CMPXCHG_LOCAL=y
CONFIG_MMU=y
CONFIG_ZONE_DMA=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_IOMAP=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_ASM_SEMAPHORES=y
CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_ARCH_HAS_CPU_RELAX=y
CONFIG_ARCH_HAS_DEFAULT_IDLE=y
CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
CONFIG_HAVE_CPUMASK_OF_CPU_MAP=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_ZONE_DMA32=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_AUDIT_ARCH=y
CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_PENDING_IRQ=y
CONFIG_USE_GENERIC_SMP_HELPERS=y
CONFIG_X86_64_SMP=y
CONFIG_X86_HT=y
CONFIG_X86_TRAMPOLINE=y
# CONFIG_KTIME_SCALAR is not set
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"

#
# General setup
#
CONFIG_EXPERIMENTAL=y
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BSD_PROCESS_ACCT_V3=y
CONFIG_TASKSTATS=y
# CONFIG_TASK_DELAY_ACCT is not set
CONFIG_TASK_XACCT=y
CONFIG_TASK_IO_ACCOUNTING=y
CONFIG_AUDIT=y
CONFIG_AUDITSYSCALL=y
CONFIG_AUDIT_TREE=y

#
# RCU Subsystem
#
# CONFIG_CLASSIC_RCU is not set
# CONFIG_TREE_RCU is not set
CONFIG_PREEMPT_RCU=y
# CONFIG_RCU_TRACE is not set
# CONFIG_TREE_RCU_TRACE is not set
# CONFIG_PREEMPT_RCU_TRACE is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=17
CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
CONFIG_GROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
CONFIG_RT_GROUP_SCHED=y
# CONFIG_USER_SCHED is not set
CONFIG_CGROUP_SCHED=y
CONFIG_CGROUPS=y
# CONFIG_CGROUP_DEBUG is not set
CONFIG_CGROUP_NS=y
# CONFIG_CGROUP_FREEZER is not set
# CONFIG_CGROUP_DEVICE is not set
CONFIG_CPUSETS=y
CONFIG_PROC_PID_CPUSET=y
CONFIG_CGROUP_CPUACCT=y
CONFIG_RESOURCE_COUNTERS=y
CONFIG_CGROUP_MEM_RES_CTLR=y
# CONFIG_CGROUP_MEM_RES_CTLR_SWAP is not set
CONFIG_MM_OWNER=y
# CONFIG_SYSFS_DEPRECATED_V2 is not set
CONFIG_RELAY=y
CONFIG_NAMESPACES=y
CONFIG_UTS_NS=y
CONFIG_IPC_NS=y
# CONFIG_USER_NS is not set
# CONFIG_PID_NS is not set
# CONFIG_NET_NS is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
# CONFIG_EMBEDDED is not set
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_PCSPKR_PLATFORM=y
# CONFIG_COMPAT_BRK is not set
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_HAVE_PERF_COUNTERS=y

#
# Performance Counters
#
CONFIG_PERF_COUNTERS=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
CONFIG_TRACEPOINTS=y
CONFIG_MARKERS=y
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
# CONFIG_MODULES is not set
CONFIG_STOP_MACHINE=y
CONFIG_BLOCK=y
# CONFIG_BLK_DEV_BSG is not set
CONFIG_BLK_DEV_INTEGRITY=y
CONFIG_BLOCK_COMPAT=y

#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
# CONFIG_DEFAULT_AS is not set
# CONFIG_DEFAULT_DEADLINE is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
CONFIG_FREEZER=y

#
# Processor type and features
#
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_SMP=y
# CONFIG_SPARSE_IRQ is not set
CONFIG_X86_MPPARSE=y
# CONFIG_X86_NON_STANDARD is not set
CONFIG_SCHED_OMIT_FRAME_POINTER=y
CONFIG_PARAVIRT_GUEST=y
CONFIG_XEN=y
CONFIG_XEN_MAX_DOMAIN_MEMORY=32
CONFIG_XEN_SAVE_RESTORE=y
# CONFIG_XEN_DEBUG_FS is not set
CONFIG_KVM_CLOCK=y
CONFIG_KVM_GUEST=y
CONFIG_PARAVIRT=y
CONFIG_PARAVIRT_CLOCK=y
# CONFIG_PARAVIRT_DEBUG is not set
# CONFIG_MEMTEST is not set
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
# CONFIG_MPENTIUMM is not set
# CONFIG_MPENTIUM4 is not set
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
# CONFIG_MK8 is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MEFFICEON is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MGEODEGX1 is not set
# CONFIG_MGEODE_LX is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
# CONFIG_MVIAC7 is not set
# CONFIG_MPSC is not set
CONFIG_MCORE2=y
# CONFIG_GENERIC_CPU is not set
CONFIG_X86_CPU=y
CONFIG_X86_L1_CACHE_BYTES=64
CONFIG_X86_INTERNODE_CACHE_BYTES=64
CONFIG_X86_CMPXCHG=y
CONFIG_X86_L1_CACHE_SHIFT=6
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INTEL_USERCOPY=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
CONFIG_X86_P6_NOP=y
CONFIG_X86_TSC=y
CONFIG_X86_CMPXCHG64=y
CONFIG_X86_CMOV=y
CONFIG_X86_MINIMUM_CPU_FAMILY=64
CONFIG_X86_DEBUGCTLMSR=y
CONFIG_CPU_SUP_INTEL=y
CONFIG_CPU_SUP_AMD=y
CONFIG_CPU_SUP_CENTAUR_64=y
# CONFIG_X86_DS is not set
# CONFIG_X86_PTRACE_BTS is not set
CONFIG_HPET_TIMER=y
CONFIG_HPET_EMULATE_RTC=y
CONFIG_DMI=y
CONFIG_GART_IOMMU=y
CONFIG_CALGARY_IOMMU=y
CONFIG_CALGARY_IOMMU_ENABLED_BY_DEFAULT=y
# CONFIG_AMD_IOMMU is not set
CONFIG_SWIOTLB=y
CONFIG_IOMMU_HELPER=y
# CONFIG_IOMMU_API is not set
# CONFIG_MAXSMP is not set
CONFIG_NR_CPUS=2
# CONFIG_SCHED_SMT is not set
CONFIG_SCHED_MC=y
# CONFIG_PREEMPT_NONE is not set
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT_DESKTOP is not set
CONFIG_PREEMPT_RT=y
CONFIG_PREEMPT=y
CONFIG_PREEMPT_SOFTIRQS=y
CONFIG_PREEMPT_HARDIRQS=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
# CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS is not set
CONFIG_X86_MCE=y
CONFIG_X86_MCE_INTEL=y
CONFIG_X86_MCE_AMD=y
CONFIG_I8K=y
CONFIG_MICROCODE=y
CONFIG_MICROCODE_INTEL=y
# CONFIG_MICROCODE_AMD is not set
CONFIG_MICROCODE_OLD_INTERFACE=y
CONFIG_X86_MSR=y
CONFIG_X86_CPUID=y
CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
CONFIG_DIRECT_GBPAGES=y
CONFIG_NUMA=y
CONFIG_K8_NUMA=y
CONFIG_X86_64_ACPI_NUMA=y
CONFIG_NODES_SPAN_OTHER_NODES=y
# CONFIG_NUMA_EMU is not set
CONFIG_NODES_SHIFT=6
CONFIG_ARCH_SPARSEMEM_DEFAULT=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000
CONFIG_SELECT_MEMORY_MODEL=y
# CONFIG_FLATMEM_MANUAL is not set
# CONFIG_DISCONTIGMEM_MANUAL is not set
CONFIG_SPARSEMEM_MANUAL=y
CONFIG_SPARSEMEM=y
CONFIG_NEED_MULTIPLE_NODES=y
CONFIG_HAVE_MEMORY_PRESENT=y
CONFIG_SPARSEMEM_EXTREME=y
CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
CONFIG_SPARSEMEM_VMEMMAP=y
# CONFIG_MEMORY_HOTPLUG is not set
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_MIGRATION=y
CONFIG_PHYS_ADDR_T_64BIT=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
# CONFIG_X86_CHECK_BIOS_CORRUPTION is not set
CONFIG_X86_RESERVE_LOW_64K=y
CONFIG_MTRR=y
CONFIG_MTRR_SANITIZER=y
CONFIG_MTRR_SANITIZER_ENABLE_DEFAULT=0
CONFIG_MTRR_SANITIZER_SPARE_REG_NR_DEFAULT=1
# CONFIG_X86_PAT is not set
CONFIG_EFI=y
CONFIG_SECCOMP=y
# CONFIG_CC_STACKPROTECTOR is not set
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
CONFIG_SCHED_HRTICK=y
# CONFIG_KEXEC is not set
CONFIG_CRASH_DUMP=y
CONFIG_PHYSICAL_START=0x200000
CONFIG_RELOCATABLE=y
CONFIG_PHYSICAL_ALIGN=0x200000
CONFIG_HOTPLUG_CPU=y
# CONFIG_COMPAT_VDSO is not set
# CONFIG_CMDLINE_BOOL is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID=y
CONFIG_HARDIRQS_SW_RESEND=y

#
# Power management and ACPI options
#
CONFIG_PM=y
CONFIG_PM_DEBUG=y
# CONFIG_PM_VERBOSE is not set
CONFIG_CAN_PM_TRACE=y
CONFIG_PM_TRACE=y
CONFIG_PM_TRACE_RTC=y
CONFIG_PM_SLEEP_SMP=y
CONFIG_PM_SLEEP=y
CONFIG_SUSPEND=y
CONFIG_PM_TEST_SUSPEND=y
CONFIG_SUSPEND_FREEZER=y
CONFIG_ACPI=y
CONFIG_ACPI_SLEEP=y
CONFIG_ACPI_PROCFS=y
CONFIG_ACPI_PROCFS_POWER=y
CONFIG_ACPI_SYSFS_POWER=y
CONFIG_ACPI_PROC_EVENT=y
CONFIG_ACPI_AC=y
CONFIG_ACPI_BATTERY=y
CONFIG_ACPI_BUTTON=y
CONFIG_ACPI_VIDEO=y
CONFIG_ACPI_FAN=y
CONFIG_ACPI_DOCK=y
CONFIG_ACPI_PROCESSOR=y
CONFIG_ACPI_HOTPLUG_CPU=y
CONFIG_ACPI_THERMAL=y
CONFIG_ACPI_NUMA=y
CONFIG_ACPI_CUSTOM_DSDT_FILE=""
# CONFIG_ACPI_CUSTOM_DSDT is not set
CONFIG_ACPI_BLACKLIST_YEAR=0
# CONFIG_ACPI_DEBUG is not set
CONFIG_ACPI_PCI_SLOT=y
CONFIG_ACPI_SYSTEM=y
CONFIG_X86_PM_TIMER=y
CONFIG_ACPI_CONTAINER=y
CONFIG_ACPI_SBS=y

#
# CPU Frequency scaling
#
# CONFIG_CPU_FREQ is not set
CONFIG_CPU_IDLE=y
CONFIG_CPU_IDLE_GOV_LADDER=y
CONFIG_CPU_IDLE_GOV_MENU=y

#
# Memory power savings
#
# CONFIG_I7300_IDLE is not set

#
# Bus options (PCI etc.)
#
CONFIG_PCI=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
CONFIG_PCI_DOMAINS=y
# CONFIG_DMAR is not set
# CONFIG_INTR_REMAP is not set
CONFIG_PCIEPORTBUS=y
CONFIG_HOTPLUG_PCI_PCIE=y
CONFIG_PCIEAER=y
# CONFIG_PCIEASPM is not set
CONFIG_ARCH_SUPPORTS_MSI=y
CONFIG_PCI_MSI=y
CONFIG_PCI_LEGACY=y
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_STUB is not set
CONFIG_HT_IRQ=y
CONFIG_ISA_DMA_API=y
CONFIG_K8_NB=y
CONFIG_PCCARD=y
# CONFIG_PCMCIA_DEBUG is not set
CONFIG_PCMCIA=y
CONFIG_PCMCIA_LOAD_CIS=y
CONFIG_PCMCIA_IOCTL=y
CONFIG_CARDBUS=y

#
# PC-card bridges
#
CONFIG_YENTA=y
CONFIG_YENTA_O2=y
CONFIG_YENTA_RICOH=y
CONFIG_YENTA_TI=y
CONFIG_YENTA_ENE_TUNE=y
CONFIG_YENTA_TOSHIBA=y
CONFIG_PD6729=y
CONFIG_I82092=y
CONFIG_PCCARD_NONSTATIC=y
CONFIG_HOTPLUG_PCI=y
CONFIG_HOTPLUG_PCI_FAKE=y
CONFIG_HOTPLUG_PCI_ACPI=y
CONFIG_HOTPLUG_PCI_ACPI_IBM=y
CONFIG_HOTPLUG_PCI_CPCI=y
CONFIG_HOTPLUG_PCI_CPCI_ZT5550=y
CONFIG_HOTPLUG_PCI_CPCI_GENERIC=y
CONFIG_HOTPLUG_PCI_SHPC=y

#
# Executable file formats / Emulations
#
CONFIG_BINFMT_ELF=y
CONFIG_COMPAT_BINFMT_ELF=y
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
# CONFIG_HAVE_AOUT is not set
CONFIG_BINFMT_MISC=y
CONFIG_IA32_EMULATION=y
CONFIG_IA32_AOUT=y
CONFIG_COMPAT=y
CONFIG_COMPAT_FOR_U64_ALIGNMENT=y
CONFIG_SYSVIPC_COMPAT=y
CONFIG_NET=y

#
# Networking options
#
CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
CONFIG_XFRM=y
CONFIG_XFRM_USER=y
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not set
# CONFIG_XFRM_STATISTICS is not set
CONFIG_XFRM_IPCOMP=y
CONFIG_NET_KEY=y
# CONFIG_NET_KEY_MIGRATE is not set
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_IP_FIB_HASH=y
# CONFIG_IP_PNP is not set
CONFIG_NET_IPIP=y
CONFIG_NET_IPGRE=y
# CONFIG_ARPD is not set
CONFIG_SYN_COOKIES=y
CONFIG_INET_AH=y
CONFIG_INET_ESP=y
CONFIG_INET_IPCOMP=y
CONFIG_INET_XFRM_TUNNEL=y
CONFIG_INET_TUNNEL=y
CONFIG_INET_XFRM_MODE_TRANSPORT=y
CONFIG_INET_XFRM_MODE_TUNNEL=y
CONFIG_INET_XFRM_MODE_BEET=y
CONFIG_INET_LRO=y
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
CONFIG_TCP_CONG_ADVANCED=y
CONFIG_TCP_CONG_BIC=y
CONFIG_TCP_CONG_CUBIC=y
CONFIG_TCP_CONG_WESTWOOD=y
CONFIG_TCP_CONG_HTCP=y
CONFIG_TCP_CONG_HSTCP=y
CONFIG_TCP_CONG_HYBLA=y
CONFIG_TCP_CONG_VEGAS=y
CONFIG_TCP_CONG_SCALABLE=y
CONFIG_TCP_CONG_LP=y
CONFIG_TCP_CONG_VENO=y
CONFIG_TCP_CONG_YEAH=y
CONFIG_TCP_CONG_ILLINOIS=y
# CONFIG_DEFAULT_BIC is not set
CONFIG_DEFAULT_CUBIC=y
# CONFIG_DEFAULT_HTCP is not set
# CONFIG_DEFAULT_VEGAS is not set
# CONFIG_DEFAULT_WESTWOOD is not set
# CONFIG_DEFAULT_RENO is not set
CONFIG_DEFAULT_TCP_CONG="cubic"
CONFIG_TCP_MD5SIG=y
# CONFIG_IPV6 is not set
CONFIG_NETLABEL=y
CONFIG_NETWORK_SECMARK=y
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
CONFIG_IP_SCTP=y
# CONFIG_SCTP_DBG_MSG is not set
# CONFIG_SCTP_DBG_OBJCNT is not set
# CONFIG_SCTP_HMAC_NONE is not set
# CONFIG_SCTP_HMAC_SHA1 is not set
CONFIG_SCTP_HMAC_MD5=y
CONFIG_TIPC=y
# CONFIG_TIPC_ADVANCED is not set
# CONFIG_TIPC_DEBUG is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_NET_DSA is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set

#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
CONFIG_AF_RXRPC=y
# CONFIG_AF_RXRPC_DEBUG is not set
# CONFIG_RXKAD is not set
# CONFIG_PHONET is not set
# CONFIG_WIRELESS is not set
# CONFIG_WIMAX is not set
CONFIG_RFKILL=y
CONFIG_RFKILL_INPUT=y

#
# Device Drivers
#

#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
# CONFIG_STANDALONE is not set
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
# CONFIG_FIRMWARE_IN_KERNEL is not set
CONFIG_EXTRA_FIRMWARE=""
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
CONFIG_CONNECTOR=y
CONFIG_PROC_EVENTS=y
# CONFIG_MTD is not set
# CONFIG_PARPORT is not set
CONFIG_PNP=y
CONFIG_PNP_DEBUG_MESSAGES=y

#
# Protocols
#
CONFIG_PNPACPI=y
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_CRYPTOLOOP=y
# CONFIG_BLK_DEV_NBD is not set
CONFIG_BLK_DEV_SX8=y
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=65536
# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_XEN_BLKDEV_FRONTEND is not set
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_IBM_ASM is not set
# CONFIG_PHANTOM is not set
# CONFIG_SGI_IOC4 is not set
CONFIG_TIFM_CORE=y
# CONFIG_TIFM_7XX1 is not set
# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
# CONFIG_C2PORT is not set

#
# EEPROM support
#
# CONFIG_EEPROM_AT24 is not set
# CONFIG_EEPROM_LEGACY is not set
# CONFIG_EEPROM_93CX6 is not set
CONFIG_HAVE_IDE=y
CONFIG_IDE=y

#
# Please see Documentation/ide/ide.txt for help/info on IDE drives
#
CONFIG_BLK_DEV_IDE_SATA=y
CONFIG_IDE_GD=y
CONFIG_IDE_GD_ATA=y
# CONFIG_IDE_GD_ATAPI is not set
# CONFIG_BLK_DEV_IDECS is not set
# CONFIG_BLK_DEV_DELKIN is not set
# CONFIG_BLK_DEV_IDECD is not set
# CONFIG_BLK_DEV_IDETAPE is not set
# CONFIG_BLK_DEV_IDEACPI is not set
# CONFIG_IDE_TASK_IOCTL is not set
CONFIG_IDE_PROC_FS=y

#
# IDE chipset support/bugfixes
#
CONFIG_IDE_GENERIC=y
# CONFIG_BLK_DEV_PLATFORM is not set
# CONFIG_BLK_DEV_CMD640 is not set
CONFIG_BLK_DEV_IDEPNP=y
CONFIG_BLK_DEV_IDEDMA_SFF=y

#
# PCI IDE chipsets support
#
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_IDEPCI_PCIBUS_ORDER=y
# CONFIG_BLK_DEV_GENERIC is not set
# CONFIG_BLK_DEV_OPTI621 is not set
# CONFIG_BLK_DEV_RZ1000 is not set
CONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_AEC62XX is not set
# CONFIG_BLK_DEV_ALI15X3 is not set
# CONFIG_BLK_DEV_AMD74XX is not set
# CONFIG_BLK_DEV_ATIIXP is not set
# CONFIG_BLK_DEV_CMD64X is not set
# CONFIG_BLK_DEV_TRIFLEX is not set
# CONFIG_BLK_DEV_CS5520 is not set
# CONFIG_BLK_DEV_CS5530 is not set
# CONFIG_BLK_DEV_HPT366 is not set
# CONFIG_BLK_DEV_JMICRON is not set
# CONFIG_BLK_DEV_SC1200 is not set
CONFIG_BLK_DEV_PIIX=y
# CONFIG_BLK_DEV_IT8172 is not set
# CONFIG_BLK_DEV_IT8213 is not set
# CONFIG_BLK_DEV_IT821X is not set
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_PDC202XX_OLD is not set
# CONFIG_BLK_DEV_PDC202XX_NEW is not set
# CONFIG_BLK_DEV_SVWKS is not set
# CONFIG_BLK_DEV_SIIMAGE is not set
# CONFIG_BLK_DEV_SIS5513 is not set
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not set
# CONFIG_BLK_DEV_VIA82CXXX is not set
# CONFIG_BLK_DEV_TC86C001 is not set
CONFIG_BLK_DEV_IDEDMA=y

#
# SCSI device support
#
CONFIG_RAID_ATTRS=y
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
CONFIG_SCSI_TGT=y
CONFIG_SCSI_NETLINK=y
CONFIG_SCSI_PROC_FS=y

#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
CONFIG_BLK_DEV_SR=y
# CONFIG_BLK_DEV_SR_VENDOR is not set
CONFIG_CHR_DEV_SG=y
# CONFIG_CHR_DEV_SCH is not set

#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
# CONFIG_SCSI_MULTI_LUN is not set
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
# CONFIG_SCSI_SCAN_ASYNC is not set

#
# SCSI Transports
#
CONFIG_SCSI_SPI_ATTRS=y
CONFIG_SCSI_FC_ATTRS=y
CONFIG_SCSI_FC_TGT_ATTRS=y
CONFIG_SCSI_ISCSI_ATTRS=y
CONFIG_SCSI_SAS_ATTRS=y
CONFIG_SCSI_SAS_LIBSAS=y
CONFIG_SCSI_SAS_ATA=y
CONFIG_SCSI_SAS_HOST_SMP=y
# CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set
CONFIG_SCSI_SRP_ATTRS=y
CONFIG_SCSI_SRP_TGT_ATTRS=y
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_AIC94XX is not set
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_ARCMSR is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_LIBFC is not set
# CONFIG_FCOE is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_STEX is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
# CONFIG_SCSI_QLA_FC is not set
# CONFIG_SCSI_QLA_ISCSI is not set
# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_SRP is not set
# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
# CONFIG_SCSI_DH is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_ATA_ACPI=y
CONFIG_SATA_PMP=y
CONFIG_SATA_AHCI=y
CONFIG_SATA_SIL24=y
CONFIG_ATA_SFF=y
# CONFIG_SATA_SVW is not set
CONFIG_ATA_PIIX=y
# CONFIG_SATA_MV is not set
# CONFIG_SATA_NV is not set
# CONFIG_PDC_ADMA is not set
# CONFIG_SATA_QSTOR is not set
# CONFIG_SATA_PROMISE is not set
# CONFIG_SATA_SX4 is not set
# CONFIG_SATA_SIL is not set
# CONFIG_SATA_SIS is not set
# CONFIG_SATA_ULI is not set
# CONFIG_SATA_VIA is not set
# CONFIG_SATA_VITESSE is not set
# CONFIG_SATA_INIC162X is not set
# CONFIG_PATA_ACPI is not set
# CONFIG_PATA_ALI is not set
# CONFIG_PATA_AMD is not set
# CONFIG_PATA_ARTOP is not set
# CONFIG_PATA_ATIIXP is not set
# CONFIG_PATA_CMD640_PCI is not set
# CONFIG_PATA_CMD64X is not set
# CONFIG_PATA_CS5520 is not set
# CONFIG_PATA_CS5530 is not set
# CONFIG_PATA_CYPRESS is not set
# CONFIG_PATA_EFAR is not set
# CONFIG_ATA_GENERIC is not set
# CONFIG_PATA_HPT366 is not set
# CONFIG_PATA_HPT37X is not set
# CONFIG_PATA_HPT3X2N is not set
# CONFIG_PATA_HPT3X3 is not set
# CONFIG_PATA_IT821X is not set
# CONFIG_PATA_IT8213 is not set
# CONFIG_PATA_JMICRON is not set
# CONFIG_PATA_TRIFLEX is not set
# CONFIG_PATA_MARVELL is not set
# CONFIG_PATA_MPIIX is not set
# CONFIG_PATA_OLDPIIX is not set
# CONFIG_PATA_NETCELL is not set
# CONFIG_PATA_NINJA32 is not set
# CONFIG_PATA_NS87410 is not set
# CONFIG_PATA_NS87415 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_OPTIDMA is not set
# CONFIG_PATA_PCMCIA is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_RADISYS is not set
# CONFIG_PATA_RZ1000 is not set
# CONFIG_PATA_SC1200 is not set
# CONFIG_PATA_SERVERWORKS is not set
# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_SIL680 is not set
# CONFIG_PATA_SIS is not set
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set
# CONFIG_PATA_SCH is not set
# CONFIG_MD is not set
# CONFIG_FUSION is not set

#
# IEEE 1394 (FireWire) support
#

#
# Enable only one of the two stacks, unless you know what you are doing
#
# CONFIG_FIREWIRE is not set
CONFIG_IEEE1394=y
CONFIG_IEEE1394_OHCI1394=y
CONFIG_IEEE1394_PCILYNX=y
CONFIG_IEEE1394_SBP2=y
# CONFIG_IEEE1394_SBP2_PHYS_DMA is not set
CONFIG_IEEE1394_ETH1394_ROM_ENTRY=y
CONFIG_IEEE1394_ETH1394=y
CONFIG_IEEE1394_RAWIO=y
CONFIG_IEEE1394_VIDEO1394=y
CONFIG_IEEE1394_DV1394=y
# CONFIG_IEEE1394_VERBOSEDEBUG is not set
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
CONFIG_DUMMY=y
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
# CONFIG_VETH is not set
# CONFIG_NET_SB1000 is not set
# CONFIG_ARCNET is not set
# CONFIG_NET_ETHERNET is not set
CONFIG_MII=y
CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_E1000E is not set
# CONFIG_IP1000 is not set
# CONFIG_IGB is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
CONFIG_R8169=y
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
# CONFIG_JME is not set
# CONFIG_NETDEV_10000 is not set
# CONFIG_TR is not set

#
# Wireless LAN
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
# CONFIG_IWLWIFI_LEDS is not set

#
# Enable WiMAX (Networking options) to see the WiMAX drivers
#
# CONFIG_NET_PCMCIA is not set
# CONFIG_WAN is not set
# CONFIG_XEN_NETDEV_FRONTEND is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
CONFIG_PPP=y
# CONFIG_PPP_MULTILINK is not set
# CONFIG_PPP_FILTER is not set
# CONFIG_PPP_ASYNC is not set
# CONFIG_PPP_SYNC_TTY is not set
# CONFIG_PPP_DEFLATE is not set
# CONFIG_PPP_BSDCOMP is not set
# CONFIG_PPP_MPPE is not set
# CONFIG_PPPOE is not set
# CONFIG_PPPOL2TP is not set
# CONFIG_SLIP is not set
CONFIG_SLHC=y
# CONFIG_NET_FC is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set

#
# Input device support
#
CONFIG_INPUT=y
CONFIG_INPUT_FF_MEMLESS=y
CONFIG_INPUT_POLLDEV=y

#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set

#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
CONFIG_KEYBOARD_SUNKBD=y
CONFIG_KEYBOARD_LKKBD=y
CONFIG_KEYBOARD_XTKBD=y
CONFIG_KEYBOARD_NEWTON=y
CONFIG_KEYBOARD_STOWAWAY=y
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
CONFIG_MOUSE_PS2_LIFEBOOK=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
# CONFIG_MOUSE_PS2_ELANTECH is not set
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
CONFIG_MOUSE_SERIAL=y
CONFIG_MOUSE_VSXXXAA=y
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TABLET is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set

#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=y
CONFIG_SERIO_CT82C710=y
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
CONFIG_SERIO_RAW=y
# CONFIG_GAMEPORT is not set

#
# Character devices
#
CONFIG_VT=y
CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
CONFIG_DEVKMEM=y
CONFIG_SERIAL_NONSTANDARD=y
# CONFIG_COMPUTONE is not set
# CONFIG_ROCKETPORT is not set
# CONFIG_CYCLADES is not set
# CONFIG_DIGIEPCA is not set
# CONFIG_MOXA_INTELLIO is not set
# CONFIG_MOXA_SMARTIO is not set
# CONFIG_ISI is not set
# CONFIG_SYNCLINK is not set
# CONFIG_SYNCLINKMP is not set
# CONFIG_SYNCLINK_GT is not set
# CONFIG_N_HDLC is not set
# CONFIG_RISCOM8 is not set
# CONFIG_SPECIALIX is not set
# CONFIG_SX is not set
# CONFIG_RIO is not set
# CONFIG_STALDRV is not set
# CONFIG_NOZOMI is not set

#
# Serial drivers
#
CONFIG_SERIAL_8250=y
# CONFIG_SERIAL_8250_CONSOLE is not set
CONFIG_FIX_EARLYCON_MEM=y
CONFIG_SERIAL_8250_PCI=y
CONFIG_SERIAL_8250_PNP=y
# CONFIG_SERIAL_8250_CS is not set
CONFIG_SERIAL_8250_NR_UARTS=48
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
# CONFIG_SERIAL_8250_EXTENDED is not set

#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=y
# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_HVC_XEN is not set
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
CONFIG_HW_RANDOM_INTEL=y
# CONFIG_HW_RANDOM_AMD is not set
CONFIG_NVRAM=y
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set

#
# PCMCIA character devices
#
# CONFIG_SYNCLINK_CS is not set
# CONFIG_CARDMAN_4000 is not set
# CONFIG_CARDMAN_4040 is not set
# CONFIG_IPWIRELESS is not set
# CONFIG_MWAVE is not set
# CONFIG_PC8736x_GPIO is not set
CONFIG_RAW_DRIVER=y
CONFIG_MAX_RAW_DEVS=256
CONFIG_HPET=y
# CONFIG_HPET_MMAP is not set
# CONFIG_HANGCHECK_TIMER is not set
# CONFIG_TCG_TPM is not set
# CONFIG_TELCLOCK is not set
CONFIG_DEVPORT=y
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
# CONFIG_I2C_CHARDEV is not set
# CONFIG_I2C_HELPER_AUTO is not set

#
# I2C Algorithms
#
CONFIG_I2C_ALGOBIT=y
CONFIG_I2C_ALGOPCF=y
CONFIG_I2C_ALGOPCA=y

#
# I2C Hardware Bus support
#

#
# PC SMBus host controller drivers
#
CONFIG_I2C_ALI1535=y
CONFIG_I2C_ALI1563=y
CONFIG_I2C_ALI15X3=y
CONFIG_I2C_AMD756=y
CONFIG_I2C_AMD8111=y
CONFIG_I2C_I801=y
CONFIG_I2C_ISCH=y
CONFIG_I2C_PIIX4=y
CONFIG_I2C_NFORCE2=y
CONFIG_I2C_SIS5595=y
CONFIG_I2C_SIS630=y
CONFIG_I2C_SIS96X=y
CONFIG_I2C_VIA=y
CONFIG_I2C_VIAPRO=y

#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
CONFIG_I2C_OCORES=y
CONFIG_I2C_SIMTEC=y

#
# External I2C/SMBus adapter drivers
#
CONFIG_I2C_PARPORT_LIGHT=y
CONFIG_I2C_TAOS_EVM=y

#
# Graphics adapter I2C/DDC channel drivers
#
CONFIG_I2C_VOODOO3=y

#
# Other I2C/SMBus bus drivers
#
CONFIG_I2C_PCA_PLATFORM=y

#
# Miscellaneous I2C Chip support
#
CONFIG_DS1682=y
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
CONFIG_SENSORS_PCF8591=y
CONFIG_SENSORS_MAX6875=y
CONFIG_SENSORS_TSL2550=y
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
# CONFIG_SPI is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
# CONFIG_GPIOLIB is not set
CONFIG_W1=y
# CONFIG_W1_CON is not set

#
# 1-wire Bus Masters
#
# CONFIG_W1_MASTER_MATROX is not set
# CONFIG_W1_MASTER_DS2482 is not set

#
# 1-wire Slaves
#
# CONFIG_W1_SLAVE_THERM is not set
# CONFIG_W1_SLAVE_SMEM is not set
# CONFIG_W1_SLAVE_DS2433 is not set
CONFIG_W1_SLAVE_DS2760=y
# CONFIG_W1_SLAVE_BQ27000 is not set
CONFIG_POWER_SUPPLY=y
# CONFIG_POWER_SUPPLY_DEBUG is not set
CONFIG_PDA_POWER=y
CONFIG_BATTERY_DS2760=y
# CONFIG_BATTERY_BQ27x00 is not set
# CONFIG_HWMON is not set
CONFIG_THERMAL=y
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y

#
# Sonics Silicon Backplane
#
# CONFIG_SSB is not set

#
# Multifunction device drivers
#
# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_REGULATOR is not set

#
# Multimedia devices
#

#
# Multimedia core support
#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
# CONFIG_VIDEO_MEDIA is not set

#
# Multimedia drivers
#
# CONFIG_DAB is not set

#
# Graphics support
#
CONFIG_AGP=y
CONFIG_AGP_AMD64=y
CONFIG_AGP_INTEL=y
# CONFIG_AGP_SIS is not set
# CONFIG_AGP_VIA is not set
CONFIG_DRM=y
# CONFIG_DRM_TDFX is not set
# CONFIG_DRM_R128 is not set
# CONFIG_DRM_RADEON is not set
CONFIG_DRM_I810=y
CONFIG_DRM_I830=y
# CONFIG_DRM_I915 is not set
# CONFIG_DRM_MGA is not set
# CONFIG_DRM_SIS is not set
# CONFIG_DRM_VIA is not set
# CONFIG_DRM_SAVAGE is not set
CONFIG_VGASTATE=y
CONFIG_VIDEO_OUTPUT_CONTROL=y
CONFIG_FB=y
CONFIG_FIRMWARE_EDID=y
CONFIG_FB_DDC=y
CONFIG_FB_BOOT_VESA_SUPPORT=y
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
# CONFIG_FB_SYS_FILLRECT is not set
# CONFIG_FB_SYS_COPYAREA is not set
# CONFIG_FB_SYS_IMAGEBLIT is not set
# CONFIG_FB_FOREIGN_ENDIAN is not set
# CONFIG_FB_SYS_FOPS is not set
# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not set
# CONFIG_FB_BACKLIGHT is not set
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_TILEBLITTING=y

#
# Frame buffer hardware drivers
#
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_ARC is not set
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
CONFIG_FB_VGA16=y
CONFIG_FB_UVESA=y
# CONFIG_FB_VESA is not set
# CONFIG_FB_EFI is not set
# CONFIG_FB_N411 is not set
# CONFIG_FB_HGA is not set
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_NVIDIA is not set
# CONFIG_FB_RIVA is not set
CONFIG_FB_LE80578=y
CONFIG_FB_CARILLO_RANCH=y
CONFIG_FB_INTEL=y
# CONFIG_FB_INTEL_DEBUG is not set
CONFIG_FB_INTEL_I2C=y
# CONFIG_FB_MATROX is not set
# CONFIG_FB_RADEON is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_S3 is not set
# CONFIG_FB_SAVAGE is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_VIA is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_VT8623 is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_ARK is not set
# CONFIG_FB_PM3 is not set
# CONFIG_FB_CARMINE is not set
# CONFIG_FB_GEODE is not set
# CONFIG_FB_VIRTUAL is not set
# CONFIG_XEN_FBDEV_FRONTEND is not set
# CONFIG_FB_METRONOME is not set
# CONFIG_FB_MB862XX is not set
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_LCD_CLASS_DEVICE=y
# CONFIG_LCD_ILI9320 is not set
CONFIG_LCD_PLATFORM=y
CONFIG_BACKLIGHT_CLASS_DEVICE=y
CONFIG_BACKLIGHT_GENERIC=y
CONFIG_BACKLIGHT_PROGEAR=y
CONFIG_BACKLIGHT_CARILLO_RANCH=y
CONFIG_BACKLIGHT_MBP_NVIDIA=y
# CONFIG_BACKLIGHT_SAHARA is not set

#
# Display device support
#
CONFIG_DISPLAY_SUPPORT=y

#
# Display hardware drivers
#

#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
# CONFIG_VGACON_SOFT_SCROLLBACK is not set
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
# CONFIG_LOGO is not set
CONFIG_SOUND=y
CONFIG_SOUND_OSS_CORE=y
CONFIG_SND=y
CONFIG_SND_TIMER=y
CONFIG_SND_PCM=y
CONFIG_SND_HWDEP=y
CONFIG_SND_JACK=y
CONFIG_SND_SEQUENCER=y
# CONFIG_SND_SEQ_DUMMY is not set
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=y
CONFIG_SND_PCM_OSS=y
CONFIG_SND_PCM_OSS_PLUGINS=y
CONFIG_SND_SEQUENCER_OSS=y
# CONFIG_SND_HRTIMER is not set
# CONFIG_SND_DYNAMIC_MINORS is not set
CONFIG_SND_SUPPORT_OLD_API=y
CONFIG_SND_VERBOSE_PROCFS=y
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
CONFIG_SND_VMASTER=y
CONFIG_SND_DRIVERS=y
# CONFIG_SND_PCSP is not set
# CONFIG_SND_DUMMY is not set
# CONFIG_SND_VIRMIDI is not set
# CONFIG_SND_SERIAL_U16550 is not set
# CONFIG_SND_MPU401 is not set
CONFIG_SND_PCI=y
# CONFIG_SND_AD1889 is not set
# CONFIG_SND_ALS300 is not set
# CONFIG_SND_ALS4000 is not set
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_ATIIXP is not set
# CONFIG_SND_ATIIXP_MODEM is not set
# CONFIG_SND_AU8810 is not set
# CONFIG_SND_AU8820 is not set
# CONFIG_SND_AU8830 is not set
# CONFIG_SND_AW2 is not set
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_BT87X is not set
# CONFIG_SND_CA0106 is not set
# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_OXYGEN is not set
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_CS5530 is not set
# CONFIG_SND_DARLA20 is not set
# CONFIG_SND_GINA20 is not set
# CONFIG_SND_LAYLA20 is not set
# CONFIG_SND_DARLA24 is not set
# CONFIG_SND_GINA24 is not set
# CONFIG_SND_LAYLA24 is not set
# CONFIG_SND_MONA is not set
# CONFIG_SND_MIA is not set
# CONFIG_SND_ECHO3G is not set
# CONFIG_SND_INDIGO is not set
# CONFIG_SND_INDIGOIO is not set
# CONFIG_SND_INDIGODJ is not set
# CONFIG_SND_EMU10K1 is not set
# CONFIG_SND_EMU10K1X is not set
# CONFIG_SND_ENS1370 is not set
# CONFIG_SND_ENS1371 is not set
# CONFIG_SND_ES1938 is not set
# CONFIG_SND_ES1968 is not set
# CONFIG_SND_FM801 is not set
CONFIG_SND_HDA_INTEL=y
CONFIG_SND_HDA_HWDEP=y
# CONFIG_SND_HDA_RECONFIG is not set
# CONFIG_SND_HDA_INPUT_BEEP is not set
CONFIG_SND_HDA_CODEC_REALTEK=y
CONFIG_SND_HDA_CODEC_ANALOG=y
CONFIG_SND_HDA_CODEC_SIGMATEL=y
CONFIG_SND_HDA_CODEC_VIA=y
CONFIG_SND_HDA_CODEC_ATIHDMI=y
CONFIG_SND_HDA_CODEC_NVHDMI=y
CONFIG_SND_HDA_CODEC_INTELHDMI=y
CONFIG_SND_HDA_ELD=y
CONFIG_SND_HDA_CODEC_CONEXANT=y
CONFIG_SND_HDA_CODEC_CMEDIA=y
CONFIG_SND_HDA_CODEC_SI3054=y
CONFIG_SND_HDA_GENERIC=y
# CONFIG_SND_HDA_POWER_SAVE is not set
# CONFIG_SND_HDSP is not set
# CONFIG_SND_HDSPM is not set
# CONFIG_SND_HIFIER is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
# CONFIG_SND_INTEL8X0 is not set
# CONFIG_SND_INTEL8X0M is not set
# CONFIG_SND_KORG1212 is not set
# CONFIG_SND_MAESTRO3 is not set
# CONFIG_SND_MIXART is not set
# CONFIG_SND_NM256 is not set
# CONFIG_SND_PCXHR is not set
# CONFIG_SND_RIPTIDE is not set
# CONFIG_SND_RME32 is not set
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
# CONFIG_SND_SONICVIBES is not set
# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_VIA82XX is not set
# CONFIG_SND_VIA82XX_MODEM is not set
# CONFIG_SND_VIRTUOSO is not set
# CONFIG_SND_VX222 is not set
# CONFIG_SND_YMFPCI is not set
# CONFIG_SND_PCMCIA is not set
# CONFIG_SND_SOC is not set
CONFIG_SOUND_PRIME=y
CONFIG_SOUND_OSS=y
# CONFIG_SOUND_TRACEINIT is not set
# CONFIG_SOUND_DMAP is not set
# CONFIG_SOUND_SSCAPE is not set
# CONFIG_SOUND_VMIDI is not set
# CONFIG_SOUND_TRIX is not set
# CONFIG_SOUND_MSS is not set
# CONFIG_SOUND_MPU401 is not set
# CONFIG_SOUND_PAS is not set
# CONFIG_SOUND_PSS is not set
# CONFIG_SOUND_SB is not set
# CONFIG_SOUND_YM3812 is not set
# CONFIG_SOUND_UART6850 is not set
# CONFIG_SOUND_AEDSP16 is not set
# CONFIG_HID_SUPPORT is not set
# CONFIG_USB_SUPPORT is not set
# CONFIG_UWB is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_ACCESSIBILITY is not set
# CONFIG_EDAC is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
# CONFIG_RTC_DEBUG is not set

#
# RTC interfaces
#
CONFIG_RTC_INTF_SYSFS=y
CONFIG_RTC_INTF_PROC=y
CONFIG_RTC_INTF_DEV=y
CONFIG_RTC_INTF_DEV_UIE_EMUL=y
CONFIG_RTC_DRV_TEST=y

#
# I2C RTC drivers
#
CONFIG_RTC_DRV_DS1307=y
CONFIG_RTC_DRV_DS1374=y
CONFIG_RTC_DRV_DS1672=y
CONFIG_RTC_DRV_MAX6900=y
CONFIG_RTC_DRV_RS5C372=y
CONFIG_RTC_DRV_ISL1208=y
CONFIG_RTC_DRV_X1205=y
CONFIG_RTC_DRV_PCF8563=y
CONFIG_RTC_DRV_PCF8583=y
CONFIG_RTC_DRV_M41T80=y
CONFIG_RTC_DRV_M41T80_WDT=y
# CONFIG_RTC_DRV_S35390A is not set
CONFIG_RTC_DRV_FM3130=y
# CONFIG_RTC_DRV_RX8581 is not set

#
# SPI RTC drivers
#

#
# Platform RTC drivers
#
CONFIG_RTC_DRV_CMOS=y
# CONFIG_RTC_DRV_DS1286 is not set
# CONFIG_RTC_DRV_DS1511 is not set
CONFIG_RTC_DRV_DS1553=y
CONFIG_RTC_DRV_DS1742=y
CONFIG_RTC_DRV_STK17TA8=y
CONFIG_RTC_DRV_M48T86=y
# CONFIG_RTC_DRV_M48T35 is not set
CONFIG_RTC_DRV_M48T59=y
# CONFIG_RTC_DRV_BQ4802 is not set
CONFIG_RTC_DRV_V3020=y

#
# on-CPU RTC drivers
#
CONFIG_DMADEVICES=y

#
# DMA Devices
#
CONFIG_INTEL_IOATDMA=y
CONFIG_DMA_ENGINE=y

#
# DMA Clients
#
CONFIG_NET_DMA=y
# CONFIG_DMATEST is not set
CONFIG_DCA=y
CONFIG_UIO=y
CONFIG_UIO_CIF=y
CONFIG_UIO_PDRV=y
CONFIG_UIO_PDRV_GENIRQ=y
CONFIG_UIO_SMX=y
# CONFIG_UIO_SERCOS3 is not set
# CONFIG_XEN_BALLOON is not set
CONFIG_XENFS=y
CONFIG_XEN_COMPAT_XENFS=y
# CONFIG_STAGING is not set
CONFIG_X86_PLATFORM_DEVICES=y
CONFIG_FUJITSU_LAPTOP=y
# CONFIG_FUJITSU_LAPTOP_DEBUG is not set
# CONFIG_HP_WMI is not set
# CONFIG_MSI_LAPTOP is not set
# CONFIG_PANASONIC_LAPTOP is not set
# CONFIG_COMPAL_LAPTOP is not set
# CONFIG_SONY_LAPTOP is not set
# CONFIG_THINKPAD_ACPI is not set
# CONFIG_INTEL_MENLOW is not set
CONFIG_ACPI_WMI=y
# CONFIG_ACPI_ASUS is not set
# CONFIG_ACPI_TOSHIBA is not set

#
# Firmware Drivers
#
CONFIG_EDD=y
CONFIG_EDD_OFF=y
CONFIG_FIRMWARE_MEMMAP=y
CONFIG_EFI_VARS=y
CONFIG_DELL_RBU=y
CONFIG_DCDBAS=y
CONFIG_DMIID=y
CONFIG_ISCSI_IBFT_FIND=y
CONFIG_ISCSI_IBFT=y

#
# File systems
#
# CONFIG_EXT2_FS is not set
# CONFIG_EXT3_FS is not set
# CONFIG_EXT4_FS is not set
CONFIG_REISERFS_FS=y
# CONFIG_REISERFS_CHECK is not set
# CONFIG_REISERFS_PROC_INFO is not set
CONFIG_REISERFS_FS_XATTR=y
CONFIG_REISERFS_FS_POSIX_ACL=y
CONFIG_REISERFS_FS_SECURITY=y
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
CONFIG_AUTOFS_FS=y
CONFIG_AUTOFS4_FS=y
# CONFIG_FUSE_FS is not set
CONFIG_GENERIC_ACL=y

#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_UDF_FS=y
CONFIG_UDF_NLS=y

#
# DOS/FAT/NT Filesystems
#
# CONFIG_MSDOS_FS is not set
# CONFIG_VFAT_FS is not set
CONFIG_NTFS_FS=y
# CONFIG_NTFS_DEBUG is not set
# CONFIG_NTFS_RW is not set

#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_VMCORE=y
CONFIG_PROC_SYSCTL=y
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
CONFIG_CONFIGFS_FS=y
CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_ECRYPT_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
CONFIG_CRAMFS=y
# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
CONFIG_ROMFS_FS=y
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
# CONFIG_NETWORK_FILESYSTEMS is not set

#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
CONFIG_ACORN_PARTITION=y
# CONFIG_ACORN_PARTITION_CUMANA is not set
# CONFIG_ACORN_PARTITION_EESOX is not set
CONFIG_ACORN_PARTITION_ICS=y
# CONFIG_ACORN_PARTITION_ADFS is not set
# CONFIG_ACORN_PARTITION_POWERTEC is not set
CONFIG_ACORN_PARTITION_RISCIX=y
# CONFIG_OSF_PARTITION is not set
# CONFIG_AMIGA_PARTITION is not set
# CONFIG_ATARI_PARTITION is not set
# CONFIG_MAC_PARTITION is not set
CONFIG_MSDOS_PARTITION=y
CONFIG_BSD_DISKLABEL=y
# CONFIG_MINIX_SUBPARTITION is not set
# CONFIG_SOLARIS_X86_PARTITION is not set
# CONFIG_UNIXWARE_DISKLABEL is not set
CONFIG_LDM_PARTITION=y
# CONFIG_LDM_DEBUG is not set
CONFIG_SGI_PARTITION=y
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not set
# CONFIG_KARMA_PARTITION is not set
CONFIG_EFI_PARTITION=y
# CONFIG_SYSV68_PARTITION is not set
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="cp437"
CONFIG_NLS_CODEPAGE_437=y
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
CONFIG_NLS_CODEPAGE_850=y
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
CONFIG_NLS_ASCII=y
CONFIG_NLS_ISO8859_1=y
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
CONFIG_NLS_ISO8859_15=y
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=y
# CONFIG_DLM is not set

#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_PRINTK_TIME=y
CONFIG_ALLOW_WARNINGS=y
# CONFIG_ENABLE_WARN_DEPRECATED is not set
# CONFIG_ENABLE_MUST_CHECK is not set
CONFIG_FRAME_WARN=2048
CONFIG_MAGIC_SYSRQ=y
CONFIG_UNUSED_SYMBOLS=y
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
CONFIG_DETECT_HUNG_TASK=y
# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
CONFIG_SCHED_DEBUG=y
CONFIG_SCHEDSTATS=y
CONFIG_TIMER_STATS=y
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_DEBUG_SLAB is not set
# CONFIG_DEBUG_PREEMPT is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
CONFIG_DEBUG_SPINLOCK=y
CONFIG_DEBUG_MUTEXES=y
CONFIG_DEBUG_LOCK_ALLOC=y
CONFIG_PROVE_LOCKING=y
CONFIG_LOCKDEP=y
# CONFIG_LOCK_STAT is not set
CONFIG_DEBUG_LOCKDEP=y
CONFIG_TRACE_IRQFLAGS=y
CONFIG_DEBUG_SPINLOCK_SLEEP=y
CONFIG_DEBUG_LOCKING_API_SELFTESTS=y
CONFIG_STACKTRACE=y
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_VIRTUAL is not set
# CONFIG_DEBUG_WRITECOUNT is not set
CONFIG_DEBUG_MEMORY_INIT=y
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
CONFIG_ARCH_WANT_FRAME_POINTERS=y
CONFIG_FRAME_POINTER=y
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
# CONFIG_SYSCTL_SYSCALL_CHECK is not set
CONFIG_USER_STACKTRACE_SUPPORT=y
CONFIG_NOP_TRACER=y
CONFIG_HAVE_FTRACE_NMI_ENTER=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_TRACER_MAX_TRACE=y
CONFIG_RING_BUFFER=y
CONFIG_FTRACE_NMI_ENTER=y
CONFIG_TRACING=y

#
# Tracers
#
CONFIG_FUNCTION_TRACER=y
CONFIG_FUNCTION_GRAPH_TRACER=y
CONFIG_IRQSOFF_TRACER=y
CONFIG_PREEMPT_TRACER=y
CONFIG_SYSPROF_TRACER=y
CONFIG_SCHED_TRACER=y
CONFIG_CONTEXT_SWITCH_TRACER=y
# CONFIG_BOOT_TRACER is not set
# CONFIG_TRACE_BRANCH_PROFILING is not set
# CONFIG_POWER_TRACER is not set
# CONFIG_STACK_TRACER is not set
# CONFIG_KMEMTRACE is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
CONFIG_DYNAMIC_FTRACE=y
CONFIG_FTRACE_MCOUNT_RECORD=y
CONFIG_FTRACE_SELFTEST=y
CONFIG_FTRACE_STARTUP_TEST=y
# CONFIG_MMIOTRACE is not set
# CONFIG_PROVIDE_OHCI1394_DMA_INIT is not set
# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
# CONFIG_STRICT_DEVMEM is not set
# CONFIG_X86_VERBOSE_BOOTUP is not set
CONFIG_EARLY_PRINTK=y
# CONFIG_EARLY_PRINTK_DBGP is not set
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_DEBUG_PER_CPU_MAPS is not set
# CONFIG_X86_PTDUMP is not set
CONFIG_DEBUG_RODATA=y
# CONFIG_DEBUG_RODATA_TEST is not set
# CONFIG_IOMMU_DEBUG is not set
CONFIG_HAVE_MMIOTRACE_SUPPORT=y
CONFIG_IO_DELAY_TYPE_0X80=0
CONFIG_IO_DELAY_TYPE_0XED=1
CONFIG_IO_DELAY_TYPE_UDELAY=2
CONFIG_IO_DELAY_TYPE_NONE=3
# CONFIG_IO_DELAY_0X80 is not set
CONFIG_IO_DELAY_0XED=y
# CONFIG_IO_DELAY_UDELAY is not set
# CONFIG_IO_DELAY_NONE is not set
CONFIG_DEFAULT_IO_DELAY_TYPE=1
# CONFIG_KMEMCHECK is not set
# CONFIG_DEBUG_BOOT_PARAMS is not set
# CONFIG_CPA_DEBUG is not set
# CONFIG_OPTIMIZE_INLINING is not set

#
# Security options
#
CONFIG_KEYS=y
# CONFIG_KEYS_DEBUG_PROC_KEYS is not set
CONFIG_SECURITY=y
# CONFIG_SECURITYFS is not set
CONFIG_SECURITY_NETWORK=y
# CONFIG_SECURITY_NETWORK_XFRM is not set
# CONFIG_SECURITY_PATH is not set
CONFIG_SECURITY_FILE_CAPABILITIES=y
CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=0
CONFIG_SECURITY_SELINUX=y
CONFIG_SECURITY_SELINUX_BOOTPARAM=y
CONFIG_SECURITY_SELINUX_BOOTPARAM_VALUE=0
CONFIG_SECURITY_SELINUX_DISABLE=y
CONFIG_SECURITY_SELINUX_DEVELOP=y
CONFIG_SECURITY_SELINUX_AVC_STATS=y
CONFIG_SECURITY_SELINUX_CHECKREQPROT_VALUE=1
# CONFIG_SECURITY_SELINUX_POLICYDB_VERSION_MAX is not set
CONFIG_SECURITY_SMACK=y
CONFIG_CRYPTO=y

#
# Crypto core or helper
#
# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG=y
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
CONFIG_CRYPTO_GF128MUL=y
CONFIG_CRYPTO_NULL=y
CONFIG_CRYPTO_CRYPTD=y
CONFIG_CRYPTO_AUTHENC=y

#
# Authenticated Encryption with Associated Data
#
CONFIG_CRYPTO_CCM=y
CONFIG_CRYPTO_GCM=y
CONFIG_CRYPTO_SEQIV=y

#
# Block modes
#
CONFIG_CRYPTO_CBC=y
CONFIG_CRYPTO_CTR=y
CONFIG_CRYPTO_CTS=y
CONFIG_CRYPTO_ECB=y
CONFIG_CRYPTO_LRW=y
CONFIG_CRYPTO_PCBC=y
CONFIG_CRYPTO_XTS=y

#
# Hash modes
#
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_XCBC=y

#
# Digest
#
CONFIG_CRYPTO_CRC32C=y
# CONFIG_CRYPTO_CRC32C_INTEL is not set
CONFIG_CRYPTO_MD4=y
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_MICHAEL_MIC=y
CONFIG_CRYPTO_RMD128=y
CONFIG_CRYPTO_RMD160=y
CONFIG_CRYPTO_RMD256=y
CONFIG_CRYPTO_RMD320=y
CONFIG_CRYPTO_SHA1=y
CONFIG_CRYPTO_SHA256=y
CONFIG_CRYPTO_SHA512=y
CONFIG_CRYPTO_TGR192=y
CONFIG_CRYPTO_WP512=y

#
# Ciphers
#
CONFIG_CRYPTO_AES=y
CONFIG_CRYPTO_AES_X86_64=y
CONFIG_CRYPTO_ANUBIS=y
CONFIG_CRYPTO_ARC4=y
CONFIG_CRYPTO_BLOWFISH=y
CONFIG_CRYPTO_CAMELLIA=y
CONFIG_CRYPTO_CAST5=y
CONFIG_CRYPTO_CAST6=y
CONFIG_CRYPTO_DES=y
CONFIG_CRYPTO_FCRYPT=y
CONFIG_CRYPTO_KHAZAD=y
CONFIG_CRYPTO_SALSA20=y
CONFIG_CRYPTO_SALSA20_X86_64=y
CONFIG_CRYPTO_SEED=y
CONFIG_CRYPTO_SERPENT=y
CONFIG_CRYPTO_TEA=y
CONFIG_CRYPTO_TWOFISH=y
CONFIG_CRYPTO_TWOFISH_COMMON=y
CONFIG_CRYPTO_TWOFISH_X86_64=y

#
# Compression
#
CONFIG_CRYPTO_DEFLATE=y
CONFIG_CRYPTO_LZO=y

#
# Random Number Generation
#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRYPTO_HW=y
CONFIG_CRYPTO_DEV_HIFN_795X=y
CONFIG_CRYPTO_DEV_HIFN_795X_RNG=y
CONFIG_HAVE_KVM=y
# CONFIG_VIRTUALIZATION is not set

#
# Library routines
#
CONFIG_BITREVERSE=y
CONFIG_GENERIC_FIND_FIRST_BIT=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_FIND_LAST_BIT=y
CONFIG_CRC_CCITT=y
CONFIG_CRC16=y
CONFIG_CRC_T10DIF=y
CONFIG_CRC_ITU_T=y
CONFIG_CRC32=y
CONFIG_CRC7=y
CONFIG_LIBCRC32C=y
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_LZO_COMPRESS=y
CONFIG_LZO_DECOMPRESS=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y

^ permalink raw reply	[flat|nested] 359+ messages in thread

* Re: [Announce] 2.6.29-rc4-rt1
  2009-02-12  0:50 ` Frederic Weisbecker
@ 2009-02-12  2:12   ` Frederic Weisbecker
  2009-02-12  8:18     ` Ingo Molnar
  2009-02-12 10:16     ` [patch] rt: res_counter fix Ingo Molnar
  0 siblings, 2 replies; 359+ messages in thread
From: Frederic Weisbecker @ 2009-02-12  2:12 UTC (permalink / raw)
  To: Thomas Gleixner
  Cc: LKML, rt-users, Ingo Molnar, Steven Rostedt, Peter Zijlstra,
	Carsten Emde, Clark Williams

On Thu, Feb 12, 2009 at 01:50:32AM +0100, Frederic Weisbecker wrote:
> On Wed, Feb 11, 2009 at 11:43:44PM +0100, Thomas Gleixner wrote:
> > After a 1.5 years sabbatical from preempt-rt we are pleased to
> > announce a refactored preempt-rt patch against linux-2.6.29-rc4.
> > 
> > The patch is working on x86 (32 and 64bit) but we have not yet updated
> > ARM, PPC and MIPS (work in progress).
> > 
> > We also dropped some experimental features of the base preempt-rt
> > queue 2.6.26.8-rt15 simply because we wanted to survive the forward
> > port over 3 kernel releases with the least amount of surprises. These
> > features (e.g. multiple reader PI locks) are not essential for the
> > preempt-rt functionality and need some serious overhaul anyway.
> > 
> > The interested -rt observer might have noticed that we based our work
> > on the 2.6.26.8-rt15 patch queue and did not pick the git-rt tree
> > which is based on 2.6.28. The reason for this is that we wanted to pick
> > the most stable patch queue and the git-rt tree has a lot of rewritten
> > new code. Our work is not making the work which was done over the last
> > months in the git-rt tree obsolete, quite the contrary: we want to
> > provide a stable yet latest-kernel based foundation and integrate those
> > changes gradually, as they become ready.
> > 
> > The further plan for the new -rt series is to merge it fully into git
> > and integrate it into the -tip git tree so it gets the same treatment
> > as all of our -tip based work: fully automated compile and boot
> > testing. Furthermore an automated multi architecture -rt performance
> > regression test based on the same infrastructure is currently being
> > built.
> > 
> > The integration into the -tip tree also allows us to seperate out parts
> > of -rt which are ready for mainline more easily and integrate them
> > with our usual propagation to mainline.
> > 
> > The structure of the patches is likely to change over the next days
> > when we tackle the git integration, but we appreciate your feedback in
> > the form of comments, bugreports and patches.
> > 
> 
> 
> Hi!
> 
> I get some sleep while atomic warnings.
> I've put the log and my config in attachment.
> 
> 

Note, it's a wicked bug: I can't reproduce it anymore.
I would have been glad to give you an irqsoff trace but I can't :-)

Oh yes I have two other warnings, for the second one, I'm not sure
this is really only present in -rt.

The first one, a lockdep warning:

[    2.975320] ---------------------------------
[    2.975320] inconsistent {hardirq-on-W} -> {in-hardirq-W} usage.
[    2.975320] swapper/0 [HC1[1]:SC0[0]:HE0:SE1] takes:
[    2.975320]  (per_cpu__lock_slab_irq_locks_locked#2){+-..}, at: [<ffffffff802f6823>] kfree+0x43/0xc0
[    2.975320] {hardirq-on-W} state was registered at:
[    2.975320]   [<ffffffff802822c5>] __lock_acquire+0x6f5/0x1b20
[    2.975320]   [<ffffffff8028378f>] lock_acquire+0x9f/0xe0
[    2.975320]   [<ffffffff8077c7f5>] rt_spin_lock+0x85/0xb0
[    2.975320]   [<ffffffff802f8251>] kmem_cache_alloc+0x51/0x1f0
[    2.975320]   [<ffffffff80253eab>] copy_process+0x9b/0x1500
[    2.975320]   [<ffffffff802553a0>] do_fork+0x90/0x4a0
[    2.975320]   [<ffffffff80213552>] kernel_thread+0x82/0xe0
[    2.975320]   [<ffffffff802135ba>] child_rip+0xa/0x20
[    2.975320]   [<ffffffffffffffff>] 0xffffffffffffffff
[    2.975320] irq event stamp: 18114
[    2.975320] hardirqs last  enabled at (18113): [<ffffffff8021a935>] default_idle+0x55/0x60
[    2.975320] hardirqs last disabled at (18114): [<ffffffff8021222a>] save_args+0x6a/0x70
[    2.975320] softirqs last  enabled at (0): [<ffffffff8025449d>] copy_process+0x68d/0x1500
[    2.975320] softirqs last disabled at (0): [<(null)>] (null)
[    2.975320] 
[    2.975320] other info that might help us debug this:
[    2.975320] no locks held by swapper/0.
[    2.975320] 
[    2.975320] stack backtrace:
[    2.975320] Pid: 0, comm: swapper Not tainted 2.6.29-rc4-rt1-tip #1
[    2.975320] Call Trace:
[    2.975320]  <IRQ>  [<ffffffff8027fcbc>] print_usage_bug+0x19c/0x200
[    2.975320]  [<ffffffff8021e6af>] ? save_stack_trace+0x2f/0x50
[    2.975320]  [<ffffffff80280315>] mark_lock+0x2a5/0xcd0
[    2.975320]  [<ffffffff8028245e>] __lock_acquire+0x88e/0x1b20
[    2.975320]  [<ffffffff8028216b>] ? __lock_acquire+0x59b/0x1b20
[    2.975320]  [<ffffffff802243e4>] ? post_set+0x64/0x70
[    2.975320]  [<ffffffff8028378f>] lock_acquire+0x9f/0xe0
[    2.975320]  [<ffffffff802f6823>] ? kfree+0x43/0xc0
[    2.975320]  [<ffffffff8077c7f5>] rt_spin_lock+0x85/0xb0
[    2.975320]  [<ffffffff802f6823>] ? kfree+0x43/0xc0
[    2.975320]  [<ffffffff802f6823>] kfree+0x43/0xc0
[    2.975320]  [<ffffffff8027f2fd>] ? trace_hardirqs_off+0xd/0x10
[    2.975320]  [<ffffffff8028a156>] generic_smp_call_function_single_interrupt+0x106/0x110
[    2.975320]  [<ffffffff80227144>] smp_call_function_single_interrupt+0x24/0x40
[    2.975320]  [<ffffffff80213223>] call_function_single_interrupt+0x13/0x20
[    2.975320]  <EOI>  [<ffffffff8022df7b>] ? native_safe_halt+0xb/0x10
[    2.975320]  [<ffffffff8022df79>] ? native_safe_halt+0x9/0x10
[    2.975320]  [<ffffffff8021a93a>] ? default_idle+0x5a/0x60
[    2.975320]  [<ffffffff8021136e>] ? cpu_idle+0x7e/0x100
[    2.975320]  [<ffffffff80775b6c>] ? start_secondary+0x197/0x1eb


The second, a sysfs warning:

[    8.042459] ------------[ cut here ]------------
[    8.054763] WARNING: at fs/sysfs/dir.c:462 sysfs_add_one+0x51/0x60()
[    8.066777] Hardware name: AMILO Li 2727                  
[    8.078555] sysfs: duplicate filename '14:4' can not be created
[    8.090353] Pid: 33, comm: work_on_cpu/0 Not tainted 2.6.29-rc4-rt1-tip #1
[    8.102482] Call Trace:
[    8.102492]  [<ffffffff80255ea3>] warn_slowpath+0xd3/0x130
[    8.102500]  [<ffffffff8077cbeb>] ? _mutex_unlock+0x2b/0x40
[    8.102508]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[    8.102513]  [<ffffffff8035c835>] ? sysfs_find_dirent+0x35/0x50
[    8.102518]  [<ffffffff8035c9f4>] ? __sysfs_add_one+0x24/0xe0
[    8.102523]  [<ffffffff8035cb01>] sysfs_add_one+0x51/0x60
[    8.102528]  [<ffffffff8035dcb3>] sysfs_do_create_link+0x103/0x170
[    8.102533]  [<ffffffff8035dd53>] sysfs_create_link+0x13/0x20
[    8.102540]  [<ffffffff8051d739>] device_add+0x209/0x620
[    8.102547]  [<ffffffff80289128>] ? __rt_spin_lock_init+0x48/0x60
[    8.102552]  [<ffffffff8051db6e>] device_register+0x1e/0x30
[    8.102557]  [<ffffffff8051dc64>] device_create_vargs+0xe4/0x100
[    8.102563]  [<ffffffff8051dcd0>] device_create+0x50/0x60
[    8.102570]  [<ffffffff80612a25>] ? sound_insert_unit+0x55/0x1e0
[    8.102575]  [<ffffffff8077c843>] ? rt_spin_unlock+0x23/0x80
[    8.102579]  [<ffffffff80612a25>] ? sound_insert_unit+0x55/0x1e0
[    8.102584]  [<ffffffff80612afa>] sound_insert_unit+0x12a/0x1e0
[    8.102590]  [<ffffffff80612d35>] register_sound_special_device+0xa5/0x220
[    8.102595]  [<ffffffff8077c112>] ? rt_mutex_lock+0x22/0x60
[    8.102601]  [<ffffffff80625499>] snd_register_oss_device+0x239/0x2c0
[    8.102608]  [<ffffffff8063b2b0>] register_oss_dsp+0x60/0x90
[    8.102613]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[    8.102618]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[    8.102623]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[    8.102629]  [<ffffffff8063f5e7>] snd_pcm_oss_register_minor+0x167/0x260
[    8.102634]  [<ffffffff80627955>] ? snd_timer_dev_register+0x35/0x130
[    8.102640]  [<ffffffff80627a0b>] ? snd_timer_dev_register+0xeb/0x130
[    8.102645]  [<ffffffff80624855>] ? snd_device_register+0x65/0x80
[    8.102650]  [<ffffffff806365af>] ? snd_pcm_timer_init+0x14f/0x1a0
[    8.102656]  [<ffffffff8062b79d>] snd_pcm_dev_register+0x1ad/0x2c0
[    8.102661]  [<ffffffff80212000>] ? sys_rt_sigreturn+0x250/0x290
[    8.102667]  [<ffffffff806247c9>] snd_device_register_all+0x39/0x60
[    8.102672]  [<ffffffff8061f25a>] snd_card_register+0x3a/0x3d0
[    8.102678]  [<ffffffff8076e5a6>] azx_probe+0x7b6/0xa90
[    8.102685]  [<ffffffff80677960>] ? azx_send_cmd+0x0/0x120
[    8.102690]  [<ffffffff80677a80>] ? azx_get_response+0x0/0x240
[    8.102695]  [<ffffffff80676eb0>] ? azx_attach_pcm_stream+0x0/0x1c0
[    8.102701]  [<ffffffff8026a5c0>] ? do_work_for_cpu+0x0/0x30
[    8.102708]  [<ffffffff80455847>] local_pci_probe+0x17/0x20
[    8.102713]  [<ffffffff8026a5d8>] do_work_for_cpu+0x18/0x30
[    8.102718]  [<ffffffff8026a88d>] run_workqueue+0x16d/0x2c0
[    8.102722]  [<ffffffff8026a83a>] ? run_workqueue+0x11a/0x2c0
[    8.102727]  [<ffffffff8026aa8f>] worker_thread+0xaf/0x130
[    8.102733]  [<ffffffff8026f5f0>] ? autoremove_wake_function+0x0/0x40
[    8.102738]  [<ffffffff8026a9e0>] ? worker_thread+0x0/0x130
[    8.102742]  [<ffffffff8026a9e0>] ? worker_thread+0x0/0x130
[    8.102747]  [<ffffffff8026f0ee>] kthread+0x4e/0x90
[    8.102752]  [<ffffffff802135ba>] child_rip+0xa/0x20
[    8.102757]  [<ffffffff80212f54>] ? restore_args+0x0/0x30
[    8.102762]  [<ffffffff8026f0a0>] ? kthread+0x0/0x90
[    8.102766]  [<ffffffff802135b0>] ? child_rip+0x0/0x20
[    8.102777] ---[ end trace 57b9b5741e12ebf7 ]---


^ permalink raw reply	[flat|nested] 359+ messages in thread

* Re: [Announce] 2.6.29-rc4-rt1
  2009-02-11 22:43 [Announce] 2.6.29-rc4-rt1 Thomas Gleixner
  2009-02-12  0:50 ` Frederic Weisbecker
@ 2009-02-12  2:55 ` Clark Williams
  2009-02-12  8:38   ` [patch] irq threading: fix PF_HARDIRQ definition Ingo Molnar
  2009-02-12 22:56 ` [Announce] 2.6.29-rc4-rt2 Thomas Gleixner
  2 siblings, 1 reply; 359+ messages in thread
From: Clark Williams @ 2009-02-12  2:55 UTC (permalink / raw)
  To: Thomas Gleixner
  Cc: LKML, rt-users, Ingo Molnar, Steven Rostedt, Peter Zijlstra,
	Carsten Emde

[-- Attachment #1: Type: text/plain, Size: 3578 bytes --]

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

On Wed, 11 Feb 2009 23:43:44 +0100 (CET)
Thomas Gleixner <tglx@tglx.de> wrote:

> After a 1.5 years sabbatical from preempt-rt we are pleased to
> announce a refactored preempt-rt patch against linux-2.6.29-rc4.


Hi Thomas, 

I got the following after booting on my T60:

- ------------[ cut here ]------------
WARNING: at crypto/blkcipher.c:327 blkcipher_walk_first+0x72/0x1aa()
Hardware name:
Modules linked in: fuse i915 drm i2c_algo_bit cfbcopyarea cfbimgblt cfbfillrect autofs4 coretemp sunrpc nf_conntrack_netbios_ns xt_state ipt_REJECT iptable_filter ip_tables cpufreq_ondemand dm_multipath scsi_dh uinput btusb bluetooth sg snd_hda_codec_analog snd_hda_intel snd_hda_codec iwl3945 snd_hwdep e1000e lib80211 snd_seq_dummy snd_seq_oss snd_seq_midi_event snd_seq snd_seq_device snd_pcm_oss video snd_mixer_oss snd_pcm snd_timer snd soundcore snd_page_alloc i2c_i801 i2c_core thinkpad_acpi rfkill output iTCO_wdt iTCO_vendor_support button joydev hwmon dm_snapshot dm_zero dm_mirror dm_region_hash dm_log uhci_hcd ohci_hcd ehci_hcd [last unloaded: microcode]
Pid: 9, comm: sirq-tasklet/0 Not tainted 2.6.29-rc4-rt1-tip #50
Call Trace:
 [<ffffffff8023bd23>] warn_slowpath+0xaf/0xd6
 [<ffffffff8035d176>] blkcipher_walk_first+0x72/0x1aa
 [<ffffffff802309cb>] ? enqueue_task_fair+0x25/0x68
 [<ffffffff8035d2f6>] blkcipher_walk_virt+0x1a/0x1c
 [<ffffffff803620af>] crypto_ecb_crypt+0x2b/0x9a
 [<ffffffff80359d20>] ? setkey+0xc4/0xd8
 [<ffffffff8036426a>] ? arc4_crypt+0x0/0x5e
 [<ffffffff8036214f>] crypto_ecb_decrypt+0x31/0x33
 [<ffffffff8035c8fb>] ? setkey+0xba/0xcd
 [<ffffffff8022bf8f>] ? __wake_up_common+0x49/0x7f
 [<ffffffff80519beb>] ieee80211_wep_decrypt_data+0x5e/0x95
 [<ffffffff80519d3a>] ieee80211_wep_decrypt+0x118/0x16f
 [<ffffffff80519ddc>] ieee80211_crypto_wep_decrypt+0x4b/0x93
 [<ffffffff80524d8f>] ieee80211_invoke_rx_handlers+0x26b/0x1395
 [<ffffffff8021ce0f>] ? native_smp_send_reschedule+0x59/0x5b
 [<ffffffff8022c699>] ? resched_task+0x60/0x62
 [<ffffffff802367a9>] ? try_to_wake_up+0x352/0x364
 [<ffffffff802367ca>] ? default_wake_function+0xf/0x11
 [<ffffffff80526418>] __ieee80211_rx_handle_packet+0x55f/0x59c
 [<ffffffff80526c82>] __ieee80211_rx+0x508/0x572
 [<ffffffff80517451>] ieee80211_tasklet_handler+0x6d/0xff
 [<ffffffff80241192>] __tasklet_action+0xa1/0x112
 [<ffffffff80241277>] tasklet_action+0x39/0x3b
 [<ffffffff80240eef>] ksoftirqd+0x162/0x278
 [<ffffffff80240d8d>] ? ksoftirqd+0x0/0x278
 [<ffffffff80240d8d>] ? ksoftirqd+0x0/0x278
 [<ffffffff8024f5ce>] kthread+0x48/0x73
 [<ffffffff8020cf6a>] child_rip+0xa/0x20
 [<ffffffff8024f586>] ? kthread+0x0/0x73
 [<ffffffff8020cf60>] ? child_rip+0x0/0x20
- ---[ end trace b6a0ff9dfe960c5e ]---

It booted to runlevel 5, brought up GDM, I logged in and XFCE came up
fine. It wasn't until NetworkManager started dorking around with the
802.11 adapter and started doing WEP things that I got the above
warning. Right after I got this, NetworkManager connected and the
system locked up. Sorry, no traceback from the panic.

I haven't gone far in looking at this, but it looks like we might have
to adjust expectations in the crypto code, since it's probably ok to
be in_irq() in this case, since we're actually in a kthread.

I've attached my config and the dmesg output.

Clark

-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.10 (GNU/Linux)

iEYEARECAAYFAkmTj60ACgkQHyuj/+TTEp2BGwCg4hbrHeiTlnr3OoQPXiqZdVAk
TqEAnjlFYKlRfNakyTVQ7X6P63dtRBaJ
=2w/c
-----END PGP SIGNATURE-----

[-- Attachment #2: 2.6.29-rc4-rt1-2.dmesg --]
[-- Type: application/octet-stream, Size: 42080 bytes --]

Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 2.6.29-rc4-rt1-tip (williams@torg) (gcc version 4.4.0 20090206 (Red Hat 4.4.0-0.16) (GCC) ) #50 SMP PREEMPT RT Wed Feb 11 20:03:41 CST 2009
Command line: ro root=LABEL=/ crashkernel=128M@16M nmi_watchdog=2
KERNEL supported cpus:
  Intel GenuineIntel
  AMD AuthenticAMD
  Centaur CentaurHauls
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
 BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000d2000 - 00000000000d4000 (reserved)
 BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 00000000bf6d0000 (usable)
 BIOS-e820: 00000000bf6d0000 - 00000000bf6df000 (ACPI data)
 BIOS-e820: 00000000bf6df000 - 00000000bf700000 (ACPI NVS)
 BIOS-e820: 00000000bf700000 - 00000000c0000000 (reserved)
 BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)
 BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
 BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
 BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
 BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
 BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
 BIOS-e820: 00000000ff800000 - 0000000100000000 (reserved)
DMI present.
last_pfn = 0xbf6d0 max_arch_pfn = 0x100000000
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
Scanning 2 areas for low memory corruption
modified physical RAM map:
 modified: 0000000000000000 - 0000000000001000 (usable)
 modified: 0000000000001000 - 0000000000006000 (reserved)
 modified: 0000000000006000 - 0000000000008000 (usable)
 modified: 0000000000008000 - 0000000000010000 (reserved)
 modified: 0000000000010000 - 0000000000092000 (usable)
 modified: 000000000009f000 - 00000000000a0000 (reserved)
 modified: 00000000000d2000 - 00000000000d4000 (reserved)
 modified: 00000000000dc000 - 0000000000100000 (reserved)
 modified: 0000000000100000 - 00000000bf6d0000 (usable)
 modified: 00000000bf6d0000 - 00000000bf6df000 (ACPI data)
 modified: 00000000bf6df000 - 00000000bf700000 (ACPI NVS)
 modified: 00000000bf700000 - 00000000c0000000 (reserved)
 modified: 00000000f0000000 - 00000000f4000000 (reserved)
 modified: 00000000fec00000 - 00000000fec10000 (reserved)
 modified: 00000000fed00000 - 00000000fed00400 (reserved)
 modified: 00000000fed14000 - 00000000fed1a000 (reserved)
 modified: 00000000fed1c000 - 00000000fed90000 (reserved)
 modified: 00000000fee00000 - 00000000fee01000 (reserved)
 modified: 00000000ff800000 - 0000000100000000 (reserved)
init_memory_mapping: 0000000000000000-00000000bf6d0000
 0000000000 - 00bf600000 page 2M
 00bf600000 - 00bf6d0000 page 4k
kernel direct mapping tables up to bf6d0000 @ 10000-15000
last_map_addr: bf6d0000 end: bf6d0000
RAMDISK: 37c79000 - 37fefd16
ACPI: RSDP 000F67E0, 0024 (r2 LENOVO)
ACPI: XSDT BF6D1555, 008C (r1 LENOVO TP-7I        1120  LTP        0)
ACPI: FACP BF6D1600, 00F4 (r3 LENOVO TP-7I        1120 LNVO        1)
ACPI Warning (tbfadt-0568): 32/64X length mismatch in Gpe0Block: 64/32 [20081204]
ACPI Warning (tbfadt-0568): 32/64X length mismatch in Gpe1Block: 0/32 [20081204]
ACPI Warning (tbfadt-0596): Optional field Gpe1Block has zero address or length: 000000000000102C/0 [20081204]
FADT: X_PM1a_EVT_BLK.bit_width (16) does not match PM1_EVT_LEN (4)
ACPI: DSDT BF6D195E, D234 (r1 LENOVO TP-7I        1120 MSFT  100000E)
ACPI: FACS BF6F4000, 0040
ACPI: SSDT BF6D17B4, 01AA (r1 LENOVO TP-7I        1120 MSFT  100000E)
ACPI: ECDT BF6DEB92, 0052 (r1 LENOVO TP-7I        1120 LNVO        1)
ACPI: TCPA BF6DEBE4, 0032 (r2 LENOVO TP-7I        1120 LNVO        1)
ACPI: APIC BF6DEC16, 0068 (r1 LENOVO TP-7I        1120 LNVO        1)
ACPI: MCFG BF6DEC7E, 003C (r1 LENOVO TP-7I        1120 LNVO        1)
ACPI: HPET BF6DECBA, 0038 (r1 LENOVO TP-7I        1120 LNVO        1)
ACPI: SLIC BF6DEE62, 0176 (r1 LENOVO TP-7I        1120  LTP        0)
ACPI: BOOT BF6DEFD8, 0028 (r1 LENOVO TP-7I        1120  LTP        1)
ACPI: SSDT BF6F2697, 025F (r1 LENOVO TP-7I        1120 INTL 20050513)
ACPI: SSDT BF6F28F6, 00A6 (r1 LENOVO TP-7I        1120 INTL 20050513)
ACPI: SSDT BF6F299C, 04F7 (r1 LENOVO TP-7I        1120 INTL 20050513)
ACPI: SSDT BF6F2E93, 01D8 (r1 LENOVO TP-7I        1120 INTL 20050513)
ACPI: Local APIC address 0xfee00000
(6 early reservations) ==> bootmem [0000000000 - 00bf6d0000]
  #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
  #1 [0000006000 - 0000008000]       TRAMPOLINE ==> [0000006000 - 0000008000]
  #2 [0000200000 - 00008b30e0]    TEXT DATA BSS ==> [0000200000 - 00008b30e0]
  #3 [0037c79000 - 0037fefd16]          RAMDISK ==> [0037c79000 - 0037fefd16]
  #4 [000009f000 - 0000100000]    BIOS reserved ==> [000009f000 - 0000100000]
  #5 [0000010000 - 0000013000]          PGTABLE ==> [0000010000 - 0000013000]
found SMP MP-table at [ffff8800000f6810] 000f6810
Reserving 128MB of memory at 16MB for crashkernel (System RAM: 3062MB)
 [ffffe20000000000-ffffe200047fffff] PMD -> [ffff880009200000-ffff88000d9fffff] on node 0
Zone PFN ranges:
  DMA      0x00000000 -> 0x00001000
  DMA32    0x00001000 -> 0x00100000
  Normal   0x00100000 -> 0x00100000
Movable zone start PFN for each node
early_node_map[4] active PFN ranges
    0: 0x00000000 -> 0x00000001
    0: 0x00000006 -> 0x00000008
    0: 0x00000010 -> 0x00000092
    0: 0x00000100 -> 0x000bf6d0
On node 0 totalpages: 783957
  DMA zone: 96 pages used for memmap
  DMA zone: 1820 pages reserved
  DMA zone: 2057 pages, LIFO batch:0
  DMA32 zone: 18281 pages used for memmap
  DMA32 zone: 761703 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x1008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 1, version 0, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
SMP: Allowing 2 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 24
Allocating PCI resources starting at c4000000 (gap: c0000000:30000000)
NR_CPUS:255 nr_cpumask_bits:255 nr_cpu_ids:2 nr_node_ids:1
PERCPU: Allocating 73728 bytes of per cpu data
Real-Time Preemption Support (C) 2004-2007 Ingo Molnar
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 763760
Kernel command line: ro root=LABEL=/ crashkernel=128M@16M nmi_watchdog=2
Initializing CPU#0
Preemptible RCU implementation.
NR_IRQS:4352 nr_irqs:424
PID hash table entries: 4096 (order: 12, 32768 bytes)
Extended CMOS year: 2000
TSC: PIT calibration matches PMTIMER. 1 loops
Detected 1995.038 MHz processor.
Console: colour VGA+ 80x25
console [tty0] enabled
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
allocated 31457280 bytes of page_cgroup
please try cgroup_disable=memory option if you don't want
Checking aperture...
No AGP bridge found
Memory: 2882456k/3136320k available (3377k kernel code, 492k absent, 252680k reserved, 2179k data, 388k init)
hpet clockevent registered
HPET: 3 timers in total, 0 timers will be used for per-cpu timer
Calibrating delay loop (skipped), value calculated using timer frequency.. 3990.07 BogoMIPS (lpj=1995038)
Security Framework initialized
SELinux:  Initializing.
SELinux:  Starting in permissive mode
Mount-cache hash table entries: 256
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 4096K
[ds] using Core 2/Atom configuration
CPU: CPU feature monitor disabled due to lack of CPUID level 0x5
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
CPU0: Thermal monitoring enabled (TM2)
Intel Performance Monitoring support detected.
... version:         2
... num counters:    2
... bit width:       40
... value mask:      000000ffffffffff
... mask length:     7
... fixed counters:  0
... counter mask:    0000000000000003
ACPI: Core revision 20081204
Setting APIC routing to flat
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Core(TM)2 CPU         T7200  @ 2.00GHz stepping 06
Booting processor 1 APIC 0x1 ip 0x6000
Initializing CPU#1
Calibrating delay using timer specific routine.. 3959.32 BogoMIPS (lpj=1979660)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 4096K
[ds] using Core 2/Atom configuration
CPU: CPU feature monitor disabled due to lack of CPUID level 0x5
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
CPU1: Thermal monitoring handled by SMI
x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
CPU1: Intel(R) Core(TM)2 CPU         T7200  @ 2.00GHz stepping 06
checking TSC synchronization [CPU#0 -> CPU#1]:
Measured 617388 cycles TSC warp between CPUs, turning off TSC clock.
Marking TSC unstable due to check_tsc_sync_source failed
Brought up 2 CPUs
Total of 2 processors activated (7949.39 BogoMIPS).
Testing NMI watchdog ... 
WARNING: CPU#0: NMI appears to be stuck (1->1)!
Please report this to bugzilla.kernel.org,
and attach the output of the 'dmesg' command.

WARNING: CPU#1: NMI appears to be stuck (1->1)!
Please report this to bugzilla.kernel.org,
and attach the output of the 'dmesg' command.
CPU0 attaching sched-domain:
 domain 0: span 0-1 level MC
  groups: 0 1
CPU1 attaching sched-domain:
 domain 0: span 0-1 level MC
  groups: 1 0
net_namespace: 1984 bytes
regulator: core version 0.5
Time:  2:10:32  Date: 02/12/09
NET: Registered protocol family 16
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type pci registered
PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 63
PCI: MCFG area at f0000000 reserved in E820
PCI: Using MMCONFIG at f0000000 - f3ffffff
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: EC: EC description table is found, configuring boot EC
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: EC: non-query interrupt received, switching to interrupt mode
ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62
ACPI: EC: driver started in interrupt mode
ACPI: ACPI Dock Station Driver: 3 docks/bays found
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:02.0: reg 10 32bit mmio: [0xee100000-0xee17ffff]
pci 0000:00:02.0: reg 14 io port: [0x1800-0x1807]
pci 0000:00:02.0: reg 18 32bit mmio: [0xd0000000-0xdfffffff]
pci 0000:00:02.0: reg 1c 32bit mmio: [0xee200000-0xee23ffff]
pci 0000:00:02.1: reg 10 32bit mmio: [0xee180000-0xee1fffff]
pci 0000:00:1b.0: reg 10 64bit mmio: [0xee240000-0xee243fff]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: PME# disabled
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: PME# disabled
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: PME# disabled
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: PME# disabled
pci 0000:00:1d.0: reg 20 io port: [0x1820-0x183f]
pci 0000:00:1d.1: reg 20 io port: [0x1840-0x185f]
pci 0000:00:1d.2: reg 20 io port: [0x1860-0x187f]
pci 0000:00:1d.3: reg 20 io port: [0x1880-0x189f]
pci 0000:00:1d.7: reg 10 32bit mmio: [0xee444000-0xee4443ff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: PME# disabled
pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
pci 0000:00:1f.0: quirk: region 1180-11bf claimed by ICH6 GPIO
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 1600 (mask 007f)
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 15e0 (mask 000f)
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 1680 (mask 001f)
pci 0000:00:1f.1: reg 10 io port: [0x00-0x07]
pci 0000:00:1f.1: reg 14 io port: [0x00-0x03]
pci 0000:00:1f.1: reg 18 io port: [0x00-0x07]
pci 0000:00:1f.1: reg 1c io port: [0x00-0x03]
pci 0000:00:1f.1: reg 20 io port: [0x1810-0x181f]
pci 0000:00:1f.2: reg 10 io port: [0x18d0-0x18d7]
pci 0000:00:1f.2: reg 14 io port: [0x18c4-0x18c7]
pci 0000:00:1f.2: reg 18 io port: [0x18c8-0x18cf]
pci 0000:00:1f.2: reg 1c io port: [0x18c0-0x18c3]
pci 0000:00:1f.2: reg 20 io port: [0x18b0-0x18bf]
pci 0000:00:1f.2: reg 24 32bit mmio: [0xee444400-0xee4447ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.2: PME# disabled
pci 0000:00:1f.3: reg 20 io port: [0x18e0-0x18ff]
pci 0000:02:00.0: reg 10 32bit mmio: [0xee000000-0xee01ffff]
pci 0000:02:00.0: reg 18 io port: [0x2000-0x201f]
pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
pci 0000:02:00.0: PME# disabled
pci 0000:00:1c.0: bridge io port: [0x2000-0x2fff]
pci 0000:00:1c.0: bridge 32bit mmio: [0xee000000-0xee0fffff]
pci 0000:03:00.0: reg 10 32bit mmio: [0xedf00000-0xedf00fff]
pci 0000:03:00.0: PME# supported from D0 D3hot
pci 0000:03:00.0: PME# disabled
pci 0000:00:1c.1: bridge io port: [0x3000-0x4fff]
pci 0000:00:1c.1: bridge 32bit mmio: [0xec000000-0xedffffff]
pci 0000:00:1c.1: bridge 64bit mmio pref: [0xe4000000-0xe40fffff]
pci 0000:00:1c.2: bridge io port: [0x5000-0x6fff]
pci 0000:00:1c.2: bridge 32bit mmio: [0xe8000000-0xe9ffffff]
pci 0000:00:1c.2: bridge 64bit mmio pref: [0xe4100000-0xe41fffff]
pci 0000:00:1c.3: bridge io port: [0x7000-0x8fff]
pci 0000:00:1c.3: bridge 32bit mmio: [0xea000000-0xebffffff]
pci 0000:00:1c.3: bridge 64bit mmio pref: [0xe4200000-0xe42fffff]
pci 0000:15:00.0: reg 10 32bit mmio: [0xe4300000-0xe4300fff]
pci 0000:15:00.0: supports D1 D2
pci 0000:15:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:15:00.0: PME# disabled
pci 0000:00:1e.0: transparent bridge
pci 0000:00:1e.0: bridge io port: [0x9000-0xcfff]
pci 0000:00:1e.0: bridge 32bit mmio: [0xe4300000-0xe7ffffff]
pci 0000:00:1e.0: bridge 64bit mmio pref: [0xe0000000-0xe3ffffff]
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP2._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP3._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: Power Resource [PUBS] (on)
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
cfg80211: Using static regulatory domain info
cfg80211: Regulatory domain: US
	(start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
	(2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm)
	(5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
	(5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
	(5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
	(5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
	(5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm)
cfg80211: Calling CRDA for country: US
NetLabel: Initializing
NetLabel:  domain hash size = 128
NetLabel:  protocols = UNLABELED CIPSOv4
NetLabel:  unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 64-bit 14.318180 MHz counter
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 11 devices
ACPI: ACPI bus type pnp unregistered
system 00:00: iomem range 0x0-0x9ffff could not be reserved
system 00:00: iomem range 0xc0000-0xc3fff has been reserved
system 00:00: iomem range 0xc4000-0xc7fff has been reserved
system 00:00: iomem range 0xc8000-0xcbfff has been reserved
system 00:00: iomem range 0xcc000-0xcffff has been reserved
system 00:00: iomem range 0xd0000-0xd3fff could not be reserved
system 00:00: iomem range 0xdc000-0xdffff could not be reserved
system 00:00: iomem range 0xe0000-0xe3fff could not be reserved
system 00:00: iomem range 0xe4000-0xe7fff could not be reserved
system 00:00: iomem range 0xe8000-0xebfff could not be reserved
system 00:00: iomem range 0xec000-0xeffff could not be reserved
system 00:00: iomem range 0xf0000-0xfffff could not be reserved
system 00:00: iomem range 0x100000-0xbfffffff could not be reserved
system 00:00: iomem range 0xfec00000-0xfed3ffff could not be reserved
system 00:00: iomem range 0xfed41000-0xffffffff could not be reserved
system 00:02: ioport range 0x164e-0x164f has been reserved
system 00:02: ioport range 0x1000-0x107f has been reserved
system 00:02: ioport range 0x1180-0x11bf has been reserved
system 00:02: ioport range 0x800-0x80f has been reserved
system 00:02: ioport range 0x15e0-0x15ef has been reserved
system 00:02: ioport range 0x1600-0x165f could not be reserved
system 00:02: iomem range 0xf0000000-0xf3ffffff has been reserved
system 00:02: iomem range 0xfed1c000-0xfed1ffff has been reserved
system 00:02: iomem range 0xfed14000-0xfed17fff has been reserved
system 00:02: iomem range 0xfed18000-0xfed18fff has been reserved
system 00:02: iomem range 0xfed19000-0xfed19fff has been reserved
pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
pci 0000:00:1c.0:   IO window: 0x2000-0x2fff
pci 0000:00:1c.0:   MEM window: 0xee000000-0xee0fffff
pci 0000:00:1c.0:   PREFETCH window: disabled
pci 0000:00:1c.1: PCI bridge, secondary bus 0000:03
pci 0000:00:1c.1:   IO window: 0x3000-0x4fff
pci 0000:00:1c.1:   MEM window: 0xec000000-0xedffffff
pci 0000:00:1c.1:   PREFETCH window: 0x000000e4000000-0x000000e40fffff
pci 0000:00:1c.2: PCI bridge, secondary bus 0000:04
pci 0000:00:1c.2:   IO window: 0x5000-0x6fff
pci 0000:00:1c.2:   MEM window: 0xe8000000-0xe9ffffff
pci 0000:00:1c.2:   PREFETCH window: 0x000000e4100000-0x000000e41fffff
pci 0000:00:1c.3: PCI bridge, secondary bus 0000:0c
pci 0000:00:1c.3:   IO window: 0x7000-0x8fff
pci 0000:00:1c.3:   MEM window: 0xea000000-0xebffffff
pci 0000:00:1c.3:   PREFETCH window: 0x000000e4200000-0x000000e42fffff
pci 0000:15:00.0: CardBus bridge, secondary bus 0000:16
pci 0000:15:00.0:   IO window: 0x009000-0x0090ff
pci 0000:15:00.0:   IO window: 0x009400-0x0094ff
pci 0000:15:00.0:   PREFETCH window: 0xe0000000-0xe3ffffff
pci 0000:15:00.0:   MEM window: 0xc4000000-0xc7ffffff
pci 0000:00:1e.0: PCI bridge, secondary bus 0000:15
pci 0000:00:1e.0:   IO window: 0x9000-0xcfff
pci 0000:00:1e.0:   MEM window: 0xe4300000-0xe7ffffff
pci 0000:00:1e.0:   PREFETCH window: 0x000000e0000000-0x000000e3ffffff
  alloc irq_desc for 20 on cpu 0 node 0
  alloc kstat_irqs on cpu 0 node 0
pci 0000:00:1c.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
pci 0000:00:1c.0: setting latency timer to 64
  alloc irq_desc for 21 on cpu 0 node 0
  alloc kstat_irqs on cpu 0 node 0
pci 0000:00:1c.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
pci 0000:00:1c.1: setting latency timer to 64
  alloc irq_desc for 22 on cpu 0 node 0
  alloc kstat_irqs on cpu 0 node 0
pci 0000:00:1c.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
pci 0000:00:1c.2: setting latency timer to 64
  alloc irq_desc for 23 on cpu 0 node 0
  alloc kstat_irqs on cpu 0 node 0
pci 0000:00:1c.3: PCI INT D -> GSI 23 (level, low) -> IRQ 23
pci 0000:00:1c.3: setting latency timer to 64
pci 0000:00:1e.0: enabling device (0005 -> 0007)
pci 0000:00:1e.0: setting latency timer to 64
  alloc irq_desc for 16 on cpu 0 node 0
  alloc kstat_irqs on cpu 0 node 0
pci 0000:15:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
pci_bus 0000:02: resource 0 io:  [0x2000-0x2fff]
pci_bus 0000:02: resource 1 mem: [0xee000000-0xee0fffff]
pci_bus 0000:02: resource 2 mem: [0x0-0x0]
pci_bus 0000:02: resource 3 mem: [0x0-0x0]
pci_bus 0000:03: resource 0 io:  [0x3000-0x4fff]
pci_bus 0000:03: resource 1 mem: [0xec000000-0xedffffff]
pci_bus 0000:03: resource 2 mem: [0xe4000000-0xe40fffff]
pci_bus 0000:03: resource 3 mem: [0x0-0x0]
pci_bus 0000:04: resource 0 io:  [0x5000-0x6fff]
pci_bus 0000:04: resource 1 mem: [0xe8000000-0xe9ffffff]
pci_bus 0000:04: resource 2 mem: [0xe4100000-0xe41fffff]
pci_bus 0000:04: resource 3 mem: [0x0-0x0]
pci_bus 0000:0c: resource 0 io:  [0x7000-0x8fff]
pci_bus 0000:0c: resource 1 mem: [0xea000000-0xebffffff]
pci_bus 0000:0c: resource 2 mem: [0xe4200000-0xe42fffff]
pci_bus 0000:0c: resource 3 mem: [0x0-0x0]
pci_bus 0000:15: resource 0 io:  [0x9000-0xcfff]
pci_bus 0000:15: resource 1 mem: [0xe4300000-0xe7ffffff]
pci_bus 0000:15: resource 2 mem: [0xe0000000-0xe3ffffff]
pci_bus 0000:15: resource 3 io:  [0x00-0xffff]
pci_bus 0000:15: resource 4 mem: [0x000000-0xffffffffffffffff]
pci_bus 0000:16: resource 0 io:  [0x9000-0x90ff]
pci_bus 0000:16: resource 1 io:  [0x9400-0x94ff]
pci_bus 0000:16: resource 2 mem: [0xe0000000-0xe3ffffff]
pci_bus 0000:16: resource 3 mem: [0xc4000000-0xc7ffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 10, 4194304 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP reno registered
NET: Registered protocol family 1
checking if image is initramfs... it is
Freeing initrd memory: 3547k freed
Simple Boot Flag at 0x35 set to 0x1
Scanning for low memory corruption every 60 seconds
audit: initializing netlink socket (disabled)
type=2000 audit(1234404631.556:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 5638
SELinux:  Registering netfilter hooks
alg: No test for stdrng (krng)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci 0000:00:02.0: Boot video device
pcieport-driver 0000:00:1c.0: setting latency timer to 64
  alloc irq_desc for 24 on cpu 0 node 0
  alloc kstat_irqs on cpu 0 node 0
pcieport-driver 0000:00:1c.0: irq 24 for MSI/MSI-X
pcieport-driver 0000:00:1c.1: setting latency timer to 64
  alloc irq_desc for 25 on cpu 0 node 0
  alloc kstat_irqs on cpu 0 node 0
pcieport-driver 0000:00:1c.1: irq 25 for MSI/MSI-X
pcieport-driver 0000:00:1c.2: setting latency timer to 64
  alloc irq_desc for 26 on cpu 0 node 0
  alloc kstat_irqs on cpu 0 node 0
pcieport-driver 0000:00:1c.2: irq 26 for MSI/MSI-X
pcieport-driver 0000:00:1c.3: setting latency timer to 64
  alloc irq_desc for 27 on cpu 0 node 0
  alloc kstat_irqs on cpu 0 node 0
pcieport-driver 0000:00:1c.3: irq 27 for MSI/MSI-X
ACPI: AC Adapter [AC] (on-line)
ACPI: Battery Slot [BAT0] (battery present)
ACPI: SSDT BF6F1D36, 0282 (r1  PmRef  Cpu0Ist      100 INTL 20050513)
ACPI: SSDT BF6F203D, 065A (r1  PmRef  Cpu0Cst      100 INTL 20050513)
Monitor-Mwait will be used to enter C-1 state
ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
processor ACPI_CPU:00: registered as cooling_device0
ACPI: Processor [CPU0] (supports 8 throttling states)
ACPI: SSDT BF6F1C6E, 00C8 (r1  PmRef  Cpu1Ist      100 INTL 20050513)
ACPI: SSDT BF6F1FB8, 0085 (r1  PmRef  Cpu1Cst      100 INTL 20050513)
ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
processor ACPI_CPU:01: registered as cooling_device1
ACPI: Processor [CPU1] (supports 8 throttling states)
thermal LNXTHERM:01: registered as thermal_zone0
ACPI: Thermal Zone [THM0] (52 C)
thermal LNXTHERM:02: registered as thermal_zone1
ACPI: Thermal Zone [THM1] (53 C)
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
agpgart-intel 0000:00:00.0: Intel 945GM Chipset
agpgart-intel 0000:00:00.0: detected 7932K stolen memory
agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
brd: module loaded
loop: module loaded
Driver 'sd' needs updating - please use bus_type methods
Driver 'sr' needs updating - please use bus_type methods
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: PCI INT B -> GSI 16 (level, low) -> IRQ 16
  alloc irq_desc for 28 on cpu 0 node 0
  alloc kstat_irqs on cpu 0 node 0
ahci 0000:00:1f.2: irq 28 for MSI/MSI-X
ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 1.5 Gbps 0x1 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part 
ahci 0000:00:1f.2: setting latency timer to 64
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
ata1: SATA max UDMA/133 abar m1024@0xee444400 port 0xee444500 irq 28
ata2: DUMMY
ata3: DUMMY
ata4: DUMMY
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 succeeded
ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out
ata1.00: ATA-7: HTS721010G9SA00, MCZIC14V, max UDMA/100
ata1.00: 195371568 sectors, multi 16: LBA48 
ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 succeeded
ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out
ata1.00: configured for UDMA/100
ata1.00: configured for UDMA/100
ata1: EH complete
scsi 0:0:0:0: Direct-Access     ATA      HTS721010G9SA00  MCZI PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 195371568 512-byte hardware sectors: (100 GB/93.1 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: [sda] 195371568 512-byte hardware sectors: (100 GB/93.1 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda: sda1 sda2
sd 0:0:0:0: [sda] Attached SCSI disk
ata_piix 0000:00:1f.1: version 2.12
ata_piix 0000:00:1f.1: PCI INT C -> GSI 16 (level, low) -> IRQ 16
ata_piix 0000:00:1f.1: setting latency timer to 64
scsi4 : ata_piix
scsi5 : ata_piix
ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1810 irq 14
ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1818 irq 15
ata5.00: ATAPI: HL-DT-ST DVDRAM GSA-4083N, 1.08, max UDMA/33
ata5.00: configured for UDMA/33
isa bounce pool size: 16 pages
scsi 4:0:0:0: CD-ROM            HL-DT-ST DVDRAM GSA-4083N 1.08 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 4:0:0:0: Attached scsi CD-ROM sr0
ata6: port disabled. ignoring.
yenta_cardbus 0000:15:00.0: CardBus bridge found [17aa:2012]
yenta_cardbus 0000:15:00.0: Using INTVAL to route CSC interrupts to PCI
yenta_cardbus 0000:15:00.0: Routing CardBus interrupts to PCI
yenta_cardbus 0000:15:00.0: TI: mfunc 0x01d01002, devctl 0x64
yenta_cardbus 0000:15:00.0: ISA IRQ mask 0x0cf8, PCI irq 16
yenta_cardbus 0000:15:00.0: Socket status: 30000007
yenta_cardbus 0000:15:00.0: pcmcia: parent PCI bridge I/O window: 0x9000 - 0xcfff
yenta_cardbus 0000:15:00.0: pcmcia: parent PCI bridge Memory window: 0xe4300000 - 0xe7ffffff
yenta_cardbus 0000:15:00.0: pcmcia: parent PCI bridge Memory window: 0xe0000000 - 0xe3ffffff
usbcore: registered new interface driver libusual
PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
rtc_cmos 00:07: RTC can wake from S4
rtc_cmos: dev (254:0)
rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com
cpuidle: using governor ladder
cpuidle: using governor menu
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
nf_conntrack.acct=1 kernel paramater, acct=1 nf_conntrack module option or
sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
TCP bic registered
Initializing XFRM netlink socket
NET: Registered protocol family 17
registered taskstats version 1
  Magic number: 13:699:156
bdi 1:8: hash matches
acpi device:23: hash matches
pci_root PNP0A08:00: hash matches
rtc_cmos 00:07: setting system clock to 2009-02-12 02:10:34 UTC (1234404634)
Freeing unused kernel memory: 388k freed
Write protecting the kernel read-only data: 5132k
Clocksource tsc unstable (delta = -197841644 ns)
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
  alloc irq_desc for 19 on cpu 0 node 0
  alloc kstat_irqs on cpu 0 node 0
ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
ehci_hcd 0000:00:1d.7: irq 19, io mem 0xee444000
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.0: irq 16, io base 0x00001820
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
  alloc irq_desc for 17 on cpu 0 node 0
  alloc kstat_irqs on cpu 0 node 0
uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.1: irq 17, io base 0x00001840
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: power state changed by ACPI to D0
  alloc irq_desc for 18 on cpu 0 node 0
  alloc kstat_irqs on cpu 0 node 0
uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001860
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
uhci_hcd 0000:00:1d.3: setting latency timer to 64
uhci_hcd 0000:00:1d.3: UHCI Host Controller
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.3: irq 19, io base 0x00001880
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting.  Commit interval 5 seconds
Synaptics Touchpad, model: 1, fw: 6.2, id: 0x81a0b1, caps: 0xa04793/0x300000
serio: Synaptics pass-through port at isa0060/serio1/input0
SELinux:  Disabled at runtime.
SELinux:  Unregistering netfilter hooks
input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input1
type=1404 audit(1234404635.236:2): selinux=0 auid=4294967295 ses=4294967295
usb 2-1: new low speed USB device using uhci_hcd and address 2
usb 2-1: configuration #1 chosen from 1 choice
input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.0/input/input2
generic-usb 0003:046D:C047.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB Optical Mouse] on usb-0000:00:1d.0-1/input0
usb 5-1: new full speed USB device using uhci_hcd and address 2
usb 5-1: configuration #1 chosen from 1 choice
usb 5-2: new full speed USB device using uhci_hcd and address 3
usb 5-2: configuration #1 chosen from 1 choice
IBM TrackPoint firmware: 0x0e, buttons: 3/3
input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input3
udev: starting version 137
input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
ACPI: Power Button (FF) [PWRF]
input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input5
ACPI: Lid Switch [LID]
input: Sleep Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input6
ACPI: Sleep Button (CM) [SLPB]
intel_rng: FWH not detected
iTCO_vendor_support: vendor-support=0
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.04
iTCO_wdt: Found a ICH7-M or ICH7-U TCO device (Version=2, TCOBASE=0x1060)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
thinkpad_acpi: ThinkPad ACPI Extras v0.22
thinkpad_acpi: http://ibm-acpi.sf.net/
thinkpad_acpi: ThinkPad BIOS 7IET31WW (1.12 ), EC 79HT50WW-1.07
thinkpad_acpi: Lenovo ThinkPad T60, model        
thinkpad_acpi: radio switch found; radios are enabled
thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver
thinkpad_acpi: Disabling thinkpad-acpi brightness events by default...
Registered led device: tpacpi::thinklight
Registered led device: tpacpi::power
Registered led device: tpacpi:orange:batt
Registered led device: tpacpi:green:batt
Registered led device: tpacpi::dock_active
Registered led device: tpacpi::bay_active
Registered led device: tpacpi::dock_batt
Registered led device: tpacpi::unknown_led
Registered led device: tpacpi::standby
thinkpad_acpi: Standard ACPI backlight interface available, not loading native one.
input: ThinkPad Extra Buttons as /devices/virtual/input/input7
i801_smbus 0000:00:1f.3: PCI INT A -> GSI 23 (level, low) -> IRQ 23
acpi device:03: registered as cooling_device2
input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/input/input8
ACPI: Video Device [VID] (multi-head: yes  rom: no  post: no)
lib80211: common routines for IEEE802.11 drivers
lib80211_crypt: registered algorithm 'NULL'
e1000e: Intel(R) PRO/1000 Network Driver - 0.3.3.3-k6
e1000e: Copyright (c) 1999-2008 Intel Corporation.
e1000e 0000:02:00.0: Disabling L1 ASPM
e1000e 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
e1000e 0000:02:00.0: setting latency timer to 64
  alloc irq_desc for 29 on cpu 0 node 0
  alloc kstat_irqs on cpu 0 node 0
e1000e 0000:02:00.0: irq 29 for MSI/MSI-X
e1000e 0000:02:00.0: Warning: detected ASPM enabled in EEPROM
0000:02:00.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:1e:37:23:b5:6a
0000:02:00.0: eth0: Intel(R) PRO/1000 Network Connection
0000:02:00.0: eth0: MAC: 2, PHY: 2, PBA No: 005301-003
iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, 1.2.26ks
iwl3945: Copyright(c) 2003-2008 Intel Corporation
iwl3945 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
iwl3945 0000:03:00.0: setting latency timer to 64
iwl3945: Tunable channels: 11 802.11bg, 13 802.11a channels
iwl3945: Detected Intel Wireless WiFi Link 3945ABG
iwl3945 0000:03:00.0: PCI INT A disabled
wmaster0 (iwl3945): not using net_device_ops yet
phy0: Selected rate control algorithm 'iwl-3945-rs'
wlan0 (iwl3945): not using net_device_ops yet
HDA Intel 0000:00:1b.0: PCI INT B -> GSI 17 (level, low) -> IRQ 17
hda_intel: probe_mask set to 0x1 for device 17aa:2010
HDA Intel 0000:00:1b.0: setting latency timer to 64
sd 0:0:0:0: Attached scsi generic sg0 type 0
sr 4:0:0:0: Attached scsi generic sg1 type 5
Bluetooth: Core ver 2.14
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: Generic Bluetooth USB driver ver 0.4
usbcore: registered new interface driver btusb
NMI watchdog is permanently disabled
device-mapper: multipath: version 1.0.5 loaded
EXT3 FS on dm-0, internal journal
kjournald starting.  Commit interval 5 seconds
EXT3 FS on sda1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
Adding 2031608k swap on /dev/mapper/VolGroup00-LogVol01.  Priority:-1 extents:1 across:2031608k 
platform microcode: firmware: requesting intel-ucode/06-0f-06
platform microcode: firmware: requesting intel-ucode/06-0f-06
Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
Microcode Update Driver: v2.00 removed.
ip_tables: (C) 2000-2006 Netfilter Core Team
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
NMI watchdog is permanently disabled
[drm] Initialized drm 1.1.0 20060810
pci 0000:00:02.0: power state changed by ACPI to D0
pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:02.0: setting latency timer to 64
[drm] Initialized i915 1.6.0 20080730 on minor 0
Xorg:9209 conflicting memory types d0000000-e0000000 uncached-minus<->write-combining
reserve_memtype failed 0xd0000000-0xe0000000, track uncached-minus, req uncached-minus
e1000e 0000:02:00.0: irq 29 for MSI/MSI-X
e1000e 0000:02:00.0: irq 29 for MSI/MSI-X
iwl3945 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
iwl3945 0000:03:00.0: restoring config space at offset 0x1 (was 0x100102, writing 0x100106)
  alloc irq_desc for 30 on cpu 0 node 0
  alloc kstat_irqs on cpu 0 node 0
iwl3945 0000:03:00.0: irq 30 for MSI/MSI-X
iwl3945 0000:03:00.0: firmware: requesting iwlwifi-3945-2.ucode
iwl3945 loaded firmware version 15.28.2.8
Registered led device: iwl-phy0:radio
Registered led device: iwl-phy0:assoc
Registered led device: iwl-phy0:RX
Registered led device: iwl-phy0:TX
Xorg:9209 conflicting memory types d0000000-e0000000 uncached-minus<->write-combining
reserve_memtype failed 0xd0000000-0xe0000000, track uncached-minus, req uncached-minus
Xorg:9209 conflicting memory types d0000000-e0000000 uncached-minus<->write-combining
reserve_memtype failed 0xd0000000-0xe0000000, track uncached-minus, req uncached-minus
Xorg:9209 conflicting memory types d0000000-e0000000 uncached-minus<->write-combining
reserve_memtype failed 0xd0000000-0xe0000000, track uncached-minus, req uncached-minus
Xorg:9599 freeing invalid memtype d0000000-e0000000
Xorg:9209 conflicting memory types d0000000-e0000000 uncached-minus<->write-combining
reserve_memtype failed 0xd0000000-0xe0000000, track uncached-minus, req uncached-minus
Xorg:9600 freeing invalid memtype d0000000-e0000000
Xorg:9209 conflicting memory types d0000000-e0000000 uncached-minus<->write-combining
reserve_memtype failed 0xd0000000-0xe0000000, track uncached-minus, req uncached-minus
Xorg:9601 freeing invalid memtype d0000000-e0000000
[drm:i915_get_vblank_counter] *ERROR* trying to get vblank count for disabled pipe 0
fuse init (API version 7.11)
wlan0: authenticate with AP 00:21:29:92:60:a7
wlan0: authenticated
wlan0: associate with AP 00:21:29:92:60:a7
wlan0: RX AssocResp from 00:21:29:92:60:a7 (capab=0x411 status=0 aid=1)
wlan0: associated
------------[ cut here ]------------
WARNING: at crypto/blkcipher.c:327 blkcipher_walk_first+0x72/0x1aa()
Hardware name:        
Modules linked in: fuse i915 drm i2c_algo_bit cfbcopyarea cfbimgblt cfbfillrect autofs4 coretemp sunrpc nf_conntrack_netbios_ns xt_state ipt_REJECT iptable_filter ip_tables cpufreq_ondemand dm_multipath scsi_dh uinput btusb bluetooth sg snd_hda_codec_analog snd_hda_intel snd_hda_codec iwl3945 snd_hwdep e1000e lib80211 snd_seq_dummy snd_seq_oss snd_seq_midi_event snd_seq snd_seq_device snd_pcm_oss video snd_mixer_oss snd_pcm snd_timer snd soundcore snd_page_alloc i2c_i801 i2c_core thinkpad_acpi rfkill output iTCO_wdt iTCO_vendor_support button joydev hwmon dm_snapshot dm_zero dm_mirror dm_region_hash dm_log uhci_hcd ohci_hcd ehci_hcd [last unloaded: microcode]
Pid: 9, comm: sirq-tasklet/0 Not tainted 2.6.29-rc4-rt1-tip #50
Call Trace:
 [<ffffffff8023bd23>] warn_slowpath+0xaf/0xd6
 [<ffffffff8035d176>] blkcipher_walk_first+0x72/0x1aa
 [<ffffffff802309cb>] ? enqueue_task_fair+0x25/0x68
 [<ffffffff8035d2f6>] blkcipher_walk_virt+0x1a/0x1c
 [<ffffffff803620af>] crypto_ecb_crypt+0x2b/0x9a
 [<ffffffff80359d20>] ? setkey+0xc4/0xd8
 [<ffffffff8036426a>] ? arc4_crypt+0x0/0x5e
 [<ffffffff8036214f>] crypto_ecb_decrypt+0x31/0x33
 [<ffffffff8035c8fb>] ? setkey+0xba/0xcd
 [<ffffffff8022bf8f>] ? __wake_up_common+0x49/0x7f
 [<ffffffff80519beb>] ieee80211_wep_decrypt_data+0x5e/0x95
 [<ffffffff80519d3a>] ieee80211_wep_decrypt+0x118/0x16f
 [<ffffffff80519ddc>] ieee80211_crypto_wep_decrypt+0x4b/0x93
 [<ffffffff80524d8f>] ieee80211_invoke_rx_handlers+0x26b/0x1395
 [<ffffffff8021ce0f>] ? native_smp_send_reschedule+0x59/0x5b
 [<ffffffff8022c699>] ? resched_task+0x60/0x62
 [<ffffffff802367a9>] ? try_to_wake_up+0x352/0x364
 [<ffffffff802367ca>] ? default_wake_function+0xf/0x11
 [<ffffffff80526418>] __ieee80211_rx_handle_packet+0x55f/0x59c
 [<ffffffff80526c82>] __ieee80211_rx+0x508/0x572
 [<ffffffff80517451>] ieee80211_tasklet_handler+0x6d/0xff
 [<ffffffff80241192>] __tasklet_action+0xa1/0x112
 [<ffffffff80241277>] tasklet_action+0x39/0x3b
 [<ffffffff80240eef>] ksoftirqd+0x162/0x278
 [<ffffffff80240d8d>] ? ksoftirqd+0x0/0x278
 [<ffffffff80240d8d>] ? ksoftirqd+0x0/0x278
 [<ffffffff8024f5ce>] kthread+0x48/0x73
 [<ffffffff8020cf6a>] child_rip+0xa/0x20
 [<ffffffff8024f586>] ? kthread+0x0/0x73
 [<ffffffff8020cf60>] ? child_rip+0x0/0x20
---[ end trace b6a0ff9dfe960c5e ]---

[-- Attachment #3: dot-config.bad --]
[-- Type: application/octet-stream, Size: 81030 bytes --]

#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.29-rc4-rt1
# Wed Feb 11 19:43:57 2009
#
CONFIG_64BIT=y
# CONFIG_X86_32 is not set
CONFIG_X86_64=y
CONFIG_X86=y
CONFIG_ARCH_DEFCONFIG="arch/x86/configs/x86_64_defconfig"
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_CLOCKSOURCE_WATCHDOG=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_FAST_CMPXCHG_LOCAL=y
CONFIG_MMU=y
CONFIG_ZONE_DMA=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_IOMAP=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_ASM_SEMAPHORES=y
CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_ARCH_HAS_CPU_RELAX=y
CONFIG_ARCH_HAS_DEFAULT_IDLE=y
CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
CONFIG_HAVE_CPUMASK_OF_CPU_MAP=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_ZONE_DMA32=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_AUDIT_ARCH=y
CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_PENDING_IRQ=y
CONFIG_USE_GENERIC_SMP_HELPERS=y
CONFIG_X86_64_SMP=y
CONFIG_X86_HT=y
CONFIG_X86_TRAMPOLINE=y
# CONFIG_KTIME_SCALAR is not set
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"

#
# General setup
#
CONFIG_EXPERIMENTAL=y
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
CONFIG_TASKSTATS=y
CONFIG_TASK_DELAY_ACCT=y
# CONFIG_TASK_XACCT is not set
CONFIG_AUDIT=y
CONFIG_AUDITSYSCALL=y
CONFIG_AUDIT_TREE=y

#
# RCU Subsystem
#
# CONFIG_CLASSIC_RCU is not set
# CONFIG_TREE_RCU is not set
CONFIG_PREEMPT_RCU=y
# CONFIG_RCU_TRACE is not set
# CONFIG_TREE_RCU_TRACE is not set
# CONFIG_PREEMPT_RCU_TRACE is not set
CONFIG_IKCONFIG=m
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=17
CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
CONFIG_GROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
# CONFIG_RT_GROUP_SCHED is not set
# CONFIG_USER_SCHED is not set
CONFIG_CGROUP_SCHED=y
CONFIG_CGROUPS=y
# CONFIG_CGROUP_DEBUG is not set
CONFIG_CGROUP_NS=y
CONFIG_CGROUP_FREEZER=y
CONFIG_CGROUP_DEVICE=y
CONFIG_CPUSETS=y
CONFIG_PROC_PID_CPUSET=y
CONFIG_CGROUP_CPUACCT=y
CONFIG_RESOURCE_COUNTERS=y
CONFIG_CGROUP_MEM_RES_CTLR=y
# CONFIG_CGROUP_MEM_RES_CTLR_SWAP is not set
CONFIG_MM_OWNER=y
# CONFIG_SYSFS_DEPRECATED_V2 is not set
CONFIG_RELAY=y
CONFIG_NAMESPACES=y
CONFIG_UTS_NS=y
CONFIG_IPC_NS=y
CONFIG_USER_NS=y
CONFIG_PID_NS=y
CONFIG_NET_NS=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
# CONFIG_EMBEDDED is not set
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
CONFIG_KALLSYMS_EXTRA_PASS=y
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_PCSPKR_PLATFORM=y
CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_HAVE_PERF_COUNTERS=y

#
# Performance Counters
#
CONFIG_PERF_COUNTERS=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
CONFIG_PROFILING=y
CONFIG_TRACEPOINTS=y
CONFIG_MARKERS=y
CONFIG_OPROFILE=m
# CONFIG_OPROFILE_IBS is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_PROFILE_NMI=y
CONFIG_KPROBES=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_KRETPROBES=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
CONFIG_MODVERSIONS=y
CONFIG_MODULE_SRCVERSION_ALL=y
CONFIG_STOP_MACHINE=y
CONFIG_BLOCK=y
# CONFIG_BLK_DEV_BSG is not set
CONFIG_BLK_DEV_INTEGRITY=y
CONFIG_BLOCK_COMPAT=y

#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
# CONFIG_DEFAULT_AS is not set
# CONFIG_DEFAULT_DEADLINE is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
CONFIG_FREEZER=y

#
# Processor type and features
#
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_SMP=y
CONFIG_SPARSE_IRQ=y
CONFIG_X86_MPPARSE=y
# CONFIG_X86_NON_STANDARD is not set
CONFIG_SCHED_OMIT_FRAME_POINTER=y
# CONFIG_PARAVIRT_GUEST is not set
# CONFIG_MEMTEST is not set
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
# CONFIG_MPENTIUMM is not set
# CONFIG_MPENTIUM4 is not set
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
# CONFIG_MK8 is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MEFFICEON is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MGEODEGX1 is not set
# CONFIG_MGEODE_LX is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
# CONFIG_MVIAC7 is not set
# CONFIG_MPSC is not set
CONFIG_MCORE2=y
# CONFIG_GENERIC_CPU is not set
CONFIG_X86_CPU=y
CONFIG_X86_L1_CACHE_BYTES=64
CONFIG_X86_INTERNODE_CACHE_BYTES=64
CONFIG_X86_CMPXCHG=y
CONFIG_X86_L1_CACHE_SHIFT=6
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INTEL_USERCOPY=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
CONFIG_X86_P6_NOP=y
CONFIG_X86_TSC=y
CONFIG_X86_CMPXCHG64=y
CONFIG_X86_CMOV=y
CONFIG_X86_MINIMUM_CPU_FAMILY=64
CONFIG_X86_DEBUGCTLMSR=y
CONFIG_CPU_SUP_INTEL=y
CONFIG_CPU_SUP_AMD=y
CONFIG_CPU_SUP_CENTAUR_64=y
CONFIG_X86_DS=y
CONFIG_X86_PTRACE_BTS=y
CONFIG_HPET_TIMER=y
CONFIG_HPET_EMULATE_RTC=y
CONFIG_DMI=y
CONFIG_GART_IOMMU=y
# CONFIG_CALGARY_IOMMU is not set
# CONFIG_AMD_IOMMU is not set
CONFIG_SWIOTLB=y
CONFIG_IOMMU_HELPER=y
# CONFIG_IOMMU_API is not set
# CONFIG_MAXSMP is not set
CONFIG_NR_CPUS=255
# CONFIG_SCHED_SMT is not set
CONFIG_SCHED_MC=y
# CONFIG_PREEMPT_NONE is not set
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT_DESKTOP is not set
CONFIG_PREEMPT_RT=y
CONFIG_PREEMPT=y
CONFIG_PREEMPT_SOFTIRQS=y
CONFIG_PREEMPT_HARDIRQS=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
# CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS is not set
CONFIG_X86_MCE=y
CONFIG_X86_MCE_INTEL=y
# CONFIG_X86_MCE_AMD is not set
# CONFIG_I8K is not set
CONFIG_MICROCODE=m
CONFIG_MICROCODE_INTEL=y
# CONFIG_MICROCODE_AMD is not set
CONFIG_MICROCODE_OLD_INTERFACE=y
CONFIG_X86_MSR=y
CONFIG_X86_CPUID=y
CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
CONFIG_DIRECT_GBPAGES=y
# CONFIG_NUMA is not set
CONFIG_ARCH_SPARSEMEM_DEFAULT=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000
CONFIG_SELECT_MEMORY_MODEL=y
# CONFIG_FLATMEM_MANUAL is not set
# CONFIG_DISCONTIGMEM_MANUAL is not set
CONFIG_SPARSEMEM_MANUAL=y
CONFIG_SPARSEMEM=y
CONFIG_HAVE_MEMORY_PRESENT=y
CONFIG_SPARSEMEM_EXTREME=y
CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
CONFIG_SPARSEMEM_VMEMMAP=y
# CONFIG_MEMORY_HOTPLUG is not set
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_PHYS_ADDR_T_64BIT=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
CONFIG_X86_CHECK_BIOS_CORRUPTION=y
CONFIG_X86_BOOTPARAM_MEMORY_CORRUPTION_CHECK=y
CONFIG_X86_RESERVE_LOW_64K=y
CONFIG_MTRR=y
CONFIG_MTRR_SANITIZER=y
CONFIG_MTRR_SANITIZER_ENABLE_DEFAULT=0
CONFIG_MTRR_SANITIZER_SPARE_REG_NR_DEFAULT=1
CONFIG_X86_PAT=y
# CONFIG_EFI is not set
CONFIG_SECCOMP=y
# CONFIG_CC_STACKPROTECTOR is not set
# CONFIG_HZ_100 is not set
# CONFIG_HZ_250 is not set
# CONFIG_HZ_300 is not set
CONFIG_HZ_1000=y
CONFIG_HZ=1000
CONFIG_SCHED_HRTICK=y
CONFIG_KEXEC=y
CONFIG_CRASH_DUMP=y
CONFIG_PHYSICAL_START=0x200000
# CONFIG_RELOCATABLE is not set
CONFIG_PHYSICAL_ALIGN=0x200000
CONFIG_HOTPLUG_CPU=y
CONFIG_COMPAT_VDSO=y
# CONFIG_CMDLINE_BOOL is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_HARDIRQS_SW_RESEND=y

#
# Power management and ACPI options
#
CONFIG_PM=y
CONFIG_PM_DEBUG=y
# CONFIG_PM_VERBOSE is not set
CONFIG_CAN_PM_TRACE=y
CONFIG_PM_TRACE=y
CONFIG_PM_TRACE_RTC=y
CONFIG_PM_SLEEP_SMP=y
CONFIG_PM_SLEEP=y
CONFIG_SUSPEND=y
# CONFIG_PM_TEST_SUSPEND is not set
CONFIG_SUSPEND_FREEZER=y
CONFIG_ACPI=y
CONFIG_ACPI_SLEEP=y
CONFIG_ACPI_PROCFS=y
CONFIG_ACPI_PROCFS_POWER=y
CONFIG_ACPI_SYSFS_POWER=y
CONFIG_ACPI_PROC_EVENT=y
CONFIG_ACPI_AC=y
CONFIG_ACPI_BATTERY=y
CONFIG_ACPI_BUTTON=m
CONFIG_ACPI_VIDEO=m
CONFIG_ACPI_FAN=y
CONFIG_ACPI_DOCK=y
CONFIG_ACPI_PROCESSOR=y
CONFIG_ACPI_HOTPLUG_CPU=y
CONFIG_ACPI_THERMAL=y
# CONFIG_ACPI_CUSTOM_DSDT is not set
CONFIG_ACPI_BLACKLIST_YEAR=0
# CONFIG_ACPI_DEBUG is not set
# CONFIG_ACPI_PCI_SLOT is not set
CONFIG_ACPI_SYSTEM=y
CONFIG_X86_PM_TIMER=y
CONFIG_ACPI_CONTAINER=y
CONFIG_ACPI_SBS=m

#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_TABLE=y
CONFIG_CPU_FREQ_DEBUG=y
CONFIG_CPU_FREQ_STAT=m
CONFIG_CPU_FREQ_STAT_DETAILS=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=m
CONFIG_CPU_FREQ_GOV_POWERSAVE=m
CONFIG_CPU_FREQ_GOV_USERSPACE=y
CONFIG_CPU_FREQ_GOV_ONDEMAND=m
CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m

#
# CPUFreq processor drivers
#
CONFIG_X86_ACPI_CPUFREQ=y
# CONFIG_X86_POWERNOW_K8 is not set
# CONFIG_X86_SPEEDSTEP_CENTRINO is not set
CONFIG_X86_P4_CLOCKMOD=m

#
# shared options
#
CONFIG_X86_SPEEDSTEP_LIB=m
CONFIG_CPU_IDLE=y
CONFIG_CPU_IDLE_GOV_LADDER=y
CONFIG_CPU_IDLE_GOV_MENU=y

#
# Memory power savings
#
CONFIG_I7300_IDLE_IOAT_CHANNEL=y
CONFIG_I7300_IDLE=m

#
# Bus options (PCI etc.)
#
CONFIG_PCI=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
CONFIG_PCI_DOMAINS=y
# CONFIG_DMAR is not set
# CONFIG_INTR_REMAP is not set
CONFIG_PCIEPORTBUS=y
CONFIG_PCIEAER=y
# CONFIG_PCIEASPM is not set
CONFIG_ARCH_SUPPORTS_MSI=y
CONFIG_PCI_MSI=y
CONFIG_PCI_LEGACY=y
# CONFIG_PCI_DEBUG is not set
CONFIG_PCI_STUB=m
CONFIG_HT_IRQ=y
CONFIG_ISA_DMA_API=y
CONFIG_K8_NB=y
CONFIG_PCCARD=y
# CONFIG_PCMCIA_DEBUG is not set
CONFIG_PCMCIA=y
CONFIG_PCMCIA_LOAD_CIS=y
CONFIG_PCMCIA_IOCTL=y
CONFIG_CARDBUS=y

#
# PC-card bridges
#
CONFIG_YENTA=y
CONFIG_YENTA_O2=y
CONFIG_YENTA_RICOH=y
CONFIG_YENTA_TI=y
CONFIG_YENTA_ENE_TUNE=y
CONFIG_YENTA_TOSHIBA=y
CONFIG_PD6729=m
CONFIG_I82092=m
CONFIG_PCCARD_NONSTATIC=y
# CONFIG_HOTPLUG_PCI is not set

#
# Executable file formats / Emulations
#
CONFIG_BINFMT_ELF=y
CONFIG_COMPAT_BINFMT_ELF=y
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
# CONFIG_HAVE_AOUT is not set
CONFIG_BINFMT_MISC=y
CONFIG_IA32_EMULATION=y
CONFIG_IA32_AOUT=m
CONFIG_COMPAT=y
CONFIG_COMPAT_FOR_U64_ALIGNMENT=y
CONFIG_SYSVIPC_COMPAT=y
CONFIG_NET=y

#
# Networking options
#
CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
CONFIG_XFRM=y
CONFIG_XFRM_USER=y
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not set
# CONFIG_XFRM_STATISTICS is not set
CONFIG_XFRM_IPCOMP=m
CONFIG_NET_KEY=m
# CONFIG_NET_KEY_MIGRATE is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
CONFIG_ASK_IP_FIB_HASH=y
# CONFIG_IP_FIB_TRIE is not set
CONFIG_IP_FIB_HASH=y
CONFIG_IP_MULTIPLE_TABLES=y
CONFIG_IP_ROUTE_MULTIPATH=y
CONFIG_IP_ROUTE_VERBOSE=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
CONFIG_IP_PNP_RARP=y
CONFIG_NET_IPIP=m
CONFIG_NET_IPGRE=m
CONFIG_NET_IPGRE_BROADCAST=y
CONFIG_IP_MROUTE=y
CONFIG_IP_PIMSM_V1=y
CONFIG_IP_PIMSM_V2=y
# CONFIG_ARPD is not set
CONFIG_SYN_COOKIES=y
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
CONFIG_INET_IPCOMP=m
CONFIG_INET_XFRM_TUNNEL=m
CONFIG_INET_TUNNEL=m
CONFIG_INET_XFRM_MODE_TRANSPORT=m
CONFIG_INET_XFRM_MODE_TUNNEL=m
CONFIG_INET_XFRM_MODE_BEET=m
CONFIG_INET_LRO=m
CONFIG_INET_DIAG=m
CONFIG_INET_TCP_DIAG=m
CONFIG_TCP_CONG_ADVANCED=y
CONFIG_TCP_CONG_BIC=y
CONFIG_TCP_CONG_CUBIC=m
CONFIG_TCP_CONG_WESTWOOD=m
CONFIG_TCP_CONG_HTCP=m
CONFIG_TCP_CONG_HSTCP=m
CONFIG_TCP_CONG_HYBLA=m
CONFIG_TCP_CONG_VEGAS=m
CONFIG_TCP_CONG_SCALABLE=m
CONFIG_TCP_CONG_LP=m
CONFIG_TCP_CONG_VENO=m
CONFIG_TCP_CONG_YEAH=m
CONFIG_TCP_CONG_ILLINOIS=m
CONFIG_DEFAULT_BIC=y
# CONFIG_DEFAULT_CUBIC is not set
# CONFIG_DEFAULT_HTCP is not set
# CONFIG_DEFAULT_VEGAS is not set
# CONFIG_DEFAULT_WESTWOOD is not set
# CONFIG_DEFAULT_RENO is not set
CONFIG_DEFAULT_TCP_CONG="bic"
CONFIG_TCP_MD5SIG=y
CONFIG_IPV6=m
CONFIG_IPV6_PRIVACY=y
CONFIG_IPV6_ROUTER_PREF=y
CONFIG_IPV6_ROUTE_INFO=y
# CONFIG_IPV6_OPTIMISTIC_DAD is not set
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
CONFIG_INET6_IPCOMP=m
CONFIG_IPV6_MIP6=m
CONFIG_INET6_XFRM_TUNNEL=m
CONFIG_INET6_TUNNEL=m
CONFIG_INET6_XFRM_MODE_TRANSPORT=m
CONFIG_INET6_XFRM_MODE_TUNNEL=m
CONFIG_INET6_XFRM_MODE_BEET=m
CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
CONFIG_IPV6_SIT=m
CONFIG_IPV6_NDISC_NODETYPE=y
CONFIG_IPV6_TUNNEL=m
CONFIG_IPV6_MULTIPLE_TABLES=y
# CONFIG_IPV6_SUBTREES is not set
# CONFIG_IPV6_MROUTE is not set
CONFIG_NETLABEL=y
CONFIG_NETWORK_SECMARK=y
CONFIG_NETFILTER=y
CONFIG_NETFILTER_DEBUG=y
CONFIG_NETFILTER_ADVANCED=y
CONFIG_BRIDGE_NETFILTER=y

#
# Core Netfilter Configuration
#
CONFIG_NETFILTER_NETLINK=m
CONFIG_NETFILTER_NETLINK_QUEUE=m
CONFIG_NETFILTER_NETLINK_LOG=m
CONFIG_NF_CONNTRACK=y
CONFIG_NF_CT_ACCT=y
CONFIG_NF_CONNTRACK_MARK=y
CONFIG_NF_CONNTRACK_SECMARK=y
CONFIG_NF_CONNTRACK_EVENTS=y
CONFIG_NF_CT_PROTO_DCCP=m
CONFIG_NF_CT_PROTO_GRE=m
CONFIG_NF_CT_PROTO_SCTP=m
CONFIG_NF_CT_PROTO_UDPLITE=m
CONFIG_NF_CONNTRACK_AMANDA=m
CONFIG_NF_CONNTRACK_FTP=m
CONFIG_NF_CONNTRACK_H323=m
CONFIG_NF_CONNTRACK_IRC=m
CONFIG_NF_CONNTRACK_NETBIOS_NS=m
CONFIG_NF_CONNTRACK_PPTP=m
# CONFIG_NF_CONNTRACK_SANE is not set
CONFIG_NF_CONNTRACK_SIP=m
CONFIG_NF_CONNTRACK_TFTP=m
CONFIG_NF_CT_NETLINK=m
CONFIG_NETFILTER_TPROXY=m
CONFIG_NETFILTER_XTABLES=y
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=m
CONFIG_NETFILTER_XT_TARGET_DSCP=m
CONFIG_NETFILTER_XT_TARGET_MARK=m
CONFIG_NETFILTER_XT_TARGET_NFLOG=m
CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
CONFIG_NETFILTER_XT_TARGET_RATEEST=m
CONFIG_NETFILTER_XT_TARGET_TPROXY=m
CONFIG_NETFILTER_XT_TARGET_TRACE=m
CONFIG_NETFILTER_XT_TARGET_SECMARK=m
CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
CONFIG_NETFILTER_XT_MATCH_COMMENT=m
CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
CONFIG_NETFILTER_XT_MATCH_CONNTRACK=y
CONFIG_NETFILTER_XT_MATCH_DCCP=m
CONFIG_NETFILTER_XT_MATCH_DSCP=m
CONFIG_NETFILTER_XT_MATCH_ESP=m
CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
CONFIG_NETFILTER_XT_MATCH_HELPER=m
CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
CONFIG_NETFILTER_XT_MATCH_LENGTH=m
CONFIG_NETFILTER_XT_MATCH_LIMIT=m
CONFIG_NETFILTER_XT_MATCH_MAC=m
CONFIG_NETFILTER_XT_MATCH_MARK=m
CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
CONFIG_NETFILTER_XT_MATCH_OWNER=m
CONFIG_NETFILTER_XT_MATCH_POLICY=m
CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m
CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
CONFIG_NETFILTER_XT_MATCH_QUOTA=m
CONFIG_NETFILTER_XT_MATCH_RATEEST=m
CONFIG_NETFILTER_XT_MATCH_REALM=m
CONFIG_NETFILTER_XT_MATCH_RECENT=m
# CONFIG_NETFILTER_XT_MATCH_RECENT_PROC_COMPAT is not set
CONFIG_NETFILTER_XT_MATCH_SCTP=m
# CONFIG_NETFILTER_XT_MATCH_SOCKET is not set
CONFIG_NETFILTER_XT_MATCH_STATE=m
CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
CONFIG_NETFILTER_XT_MATCH_STRING=m
CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
CONFIG_NETFILTER_XT_MATCH_TIME=m
CONFIG_NETFILTER_XT_MATCH_U32=m
CONFIG_IP_VS=m
CONFIG_IP_VS_IPV6=y
# CONFIG_IP_VS_DEBUG is not set
CONFIG_IP_VS_TAB_BITS=12

#
# IPVS transport protocol load balancing support
#
CONFIG_IP_VS_PROTO_TCP=y
CONFIG_IP_VS_PROTO_UDP=y
CONFIG_IP_VS_PROTO_AH_ESP=y
CONFIG_IP_VS_PROTO_ESP=y
CONFIG_IP_VS_PROTO_AH=y

#
# IPVS scheduler
#
CONFIG_IP_VS_RR=m
CONFIG_IP_VS_WRR=m
CONFIG_IP_VS_LC=m
CONFIG_IP_VS_WLC=m
CONFIG_IP_VS_LBLC=m
CONFIG_IP_VS_LBLCR=m
CONFIG_IP_VS_DH=m
CONFIG_IP_VS_SH=m
CONFIG_IP_VS_SED=m
CONFIG_IP_VS_NQ=m

#
# IPVS application helper
#
CONFIG_IP_VS_FTP=m

#
# IP: Netfilter Configuration
#
CONFIG_NF_DEFRAG_IPV4=y
CONFIG_NF_CONNTRACK_IPV4=y
CONFIG_NF_CONNTRACK_PROC_COMPAT=y
CONFIG_IP_NF_QUEUE=m
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_ADDRTYPE=m
CONFIG_IP_NF_MATCH_AH=m
CONFIG_IP_NF_MATCH_ECN=m
CONFIG_IP_NF_MATCH_TTL=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_LOG=m
CONFIG_IP_NF_TARGET_ULOG=m
CONFIG_NF_NAT=m
CONFIG_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=m
CONFIG_IP_NF_TARGET_NETMAP=m
CONFIG_IP_NF_TARGET_REDIRECT=m
CONFIG_NF_NAT_SNMP_BASIC=m
CONFIG_NF_NAT_PROTO_DCCP=m
CONFIG_NF_NAT_PROTO_GRE=m
CONFIG_NF_NAT_PROTO_UDPLITE=m
CONFIG_NF_NAT_PROTO_SCTP=m
CONFIG_NF_NAT_FTP=m
CONFIG_NF_NAT_IRC=m
CONFIG_NF_NAT_TFTP=m
CONFIG_NF_NAT_AMANDA=m
CONFIG_NF_NAT_PPTP=m
CONFIG_NF_NAT_H323=m
CONFIG_NF_NAT_SIP=m
CONFIG_IP_NF_MANGLE=m
CONFIG_IP_NF_TARGET_CLUSTERIP=m
CONFIG_IP_NF_TARGET_ECN=m
CONFIG_IP_NF_TARGET_TTL=m
CONFIG_IP_NF_RAW=m
CONFIG_IP_NF_SECURITY=m
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m

#
# IPv6: Netfilter Configuration
#
CONFIG_NF_CONNTRACK_IPV6=m
CONFIG_IP6_NF_QUEUE=m
CONFIG_IP6_NF_IPTABLES=m
CONFIG_IP6_NF_MATCH_AH=m
CONFIG_IP6_NF_MATCH_EUI64=m
CONFIG_IP6_NF_MATCH_FRAG=m
CONFIG_IP6_NF_MATCH_OPTS=m
CONFIG_IP6_NF_MATCH_HL=m
CONFIG_IP6_NF_MATCH_IPV6HEADER=m
CONFIG_IP6_NF_MATCH_MH=m
CONFIG_IP6_NF_MATCH_RT=m
CONFIG_IP6_NF_TARGET_LOG=m
CONFIG_IP6_NF_FILTER=m
CONFIG_IP6_NF_TARGET_REJECT=m
CONFIG_IP6_NF_MANGLE=m
CONFIG_IP6_NF_TARGET_HL=m
CONFIG_IP6_NF_RAW=m
CONFIG_IP6_NF_SECURITY=m
CONFIG_BRIDGE_NF_EBTABLES=m
CONFIG_BRIDGE_EBT_BROUTE=m
CONFIG_BRIDGE_EBT_T_FILTER=m
CONFIG_BRIDGE_EBT_T_NAT=m
CONFIG_BRIDGE_EBT_802_3=m
CONFIG_BRIDGE_EBT_AMONG=m
CONFIG_BRIDGE_EBT_ARP=m
CONFIG_BRIDGE_EBT_IP=m
CONFIG_BRIDGE_EBT_IP6=m
CONFIG_BRIDGE_EBT_LIMIT=m
CONFIG_BRIDGE_EBT_MARK=m
CONFIG_BRIDGE_EBT_PKTTYPE=m
CONFIG_BRIDGE_EBT_STP=m
CONFIG_BRIDGE_EBT_VLAN=m
CONFIG_BRIDGE_EBT_ARPREPLY=m
CONFIG_BRIDGE_EBT_DNAT=m
CONFIG_BRIDGE_EBT_MARK_T=m
CONFIG_BRIDGE_EBT_REDIRECT=m
CONFIG_BRIDGE_EBT_SNAT=m
CONFIG_BRIDGE_EBT_LOG=m
CONFIG_BRIDGE_EBT_ULOG=m
CONFIG_BRIDGE_EBT_NFLOG=m
CONFIG_IP_DCCP=m
CONFIG_INET_DCCP_DIAG=m

#
# DCCP CCIDs Configuration (EXPERIMENTAL)
#
# CONFIG_IP_DCCP_CCID2_DEBUG is not set
CONFIG_IP_DCCP_CCID3=y
# CONFIG_IP_DCCP_CCID3_DEBUG is not set
CONFIG_IP_DCCP_CCID3_RTO=100
CONFIG_IP_DCCP_TFRC_LIB=y

#
# DCCP Kernel Hacking
#
# CONFIG_IP_DCCP_DEBUG is not set
# CONFIG_NET_DCCPPROBE is not set
CONFIG_IP_SCTP=m
# CONFIG_SCTP_DBG_MSG is not set
# CONFIG_SCTP_DBG_OBJCNT is not set
# CONFIG_SCTP_HMAC_NONE is not set
# CONFIG_SCTP_HMAC_SHA1 is not set
CONFIG_SCTP_HMAC_MD5=y
CONFIG_TIPC=m
# CONFIG_TIPC_ADVANCED is not set
# CONFIG_TIPC_DEBUG is not set
CONFIG_ATM=m
CONFIG_ATM_CLIP=m
# CONFIG_ATM_CLIP_NO_ICMP is not set
CONFIG_ATM_LANE=m
# CONFIG_ATM_MPOA is not set
CONFIG_ATM_BR2684=m
# CONFIG_ATM_BR2684_IPFILTER is not set
CONFIG_STP=m
CONFIG_BRIDGE=m
# CONFIG_NET_DSA is not set
CONFIG_VLAN_8021Q=m
# CONFIG_VLAN_8021Q_GVRP is not set
# CONFIG_DECNET is not set
CONFIG_LLC=m
CONFIG_LLC2=m
CONFIG_IPX=m
CONFIG_IPX_INTERN=y
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
CONFIG_NET_SCHED=y

#
# Queueing/Scheduling
#
CONFIG_NET_SCH_CBQ=m
CONFIG_NET_SCH_HTB=m
CONFIG_NET_SCH_HFSC=m
CONFIG_NET_SCH_ATM=m
CONFIG_NET_SCH_PRIO=m
CONFIG_NET_SCH_MULTIQ=m
CONFIG_NET_SCH_RED=m
CONFIG_NET_SCH_SFQ=m
CONFIG_NET_SCH_TEQL=m
CONFIG_NET_SCH_TBF=m
CONFIG_NET_SCH_GRED=m
CONFIG_NET_SCH_DSMARK=m
CONFIG_NET_SCH_NETEM=m
CONFIG_NET_SCH_DRR=m
CONFIG_NET_SCH_INGRESS=m

#
# Classification
#
CONFIG_NET_CLS=y
CONFIG_NET_CLS_BASIC=m
CONFIG_NET_CLS_TCINDEX=m
CONFIG_NET_CLS_ROUTE4=m
CONFIG_NET_CLS_ROUTE=y
CONFIG_NET_CLS_FW=m
CONFIG_NET_CLS_U32=m
CONFIG_CLS_U32_PERF=y
CONFIG_CLS_U32_MARK=y
CONFIG_NET_CLS_RSVP=m
CONFIG_NET_CLS_RSVP6=m
CONFIG_NET_CLS_FLOW=m
# CONFIG_NET_CLS_CGROUP is not set
CONFIG_NET_EMATCH=y
CONFIG_NET_EMATCH_STACK=32
CONFIG_NET_EMATCH_CMP=m
CONFIG_NET_EMATCH_NBYTE=m
CONFIG_NET_EMATCH_U32=m
CONFIG_NET_EMATCH_META=m
CONFIG_NET_EMATCH_TEXT=m
CONFIG_NET_CLS_ACT=y
CONFIG_NET_ACT_POLICE=m
CONFIG_NET_ACT_GACT=m
CONFIG_GACT_PROB=y
CONFIG_NET_ACT_MIRRED=m
CONFIG_NET_ACT_IPT=m
CONFIG_NET_ACT_NAT=m
CONFIG_NET_ACT_PEDIT=m
CONFIG_NET_ACT_SIMP=m
CONFIG_NET_ACT_SKBEDIT=m
CONFIG_NET_CLS_IND=y
CONFIG_NET_SCH_FIFO=y
# CONFIG_DCB is not set

#
# Network testing
#
CONFIG_NET_PKTGEN=m
CONFIG_NET_TCPPROBE=m
# CONFIG_HAMRADIO is not set
# CONFIG_CAN is not set
CONFIG_IRDA=m

#
# IrDA protocols
#
CONFIG_IRLAN=m
CONFIG_IRNET=m
CONFIG_IRCOMM=m
CONFIG_IRDA_ULTRA=y

#
# IrDA options
#
CONFIG_IRDA_CACHE_LAST_LSAP=y
CONFIG_IRDA_FAST_RR=y
# CONFIG_IRDA_DEBUG is not set

#
# Infrared-port device drivers
#

#
# SIR device drivers
#
CONFIG_IRTTY_SIR=m

#
# Dongle support
#
CONFIG_DONGLE=y
CONFIG_ESI_DONGLE=m
CONFIG_ACTISYS_DONGLE=m
CONFIG_TEKRAM_DONGLE=m
CONFIG_TOIM3232_DONGLE=m
CONFIG_LITELINK_DONGLE=m
CONFIG_MA600_DONGLE=m
CONFIG_GIRBIL_DONGLE=m
CONFIG_MCP2120_DONGLE=m
CONFIG_OLD_BELKIN_DONGLE=m
CONFIG_ACT200L_DONGLE=m
CONFIG_KINGSUN_DONGLE=m
# CONFIG_KSDAZZLE_DONGLE is not set
# CONFIG_KS959_DONGLE is not set

#
# FIR device drivers
#
CONFIG_USB_IRDA=m
CONFIG_SIGMATEL_FIR=m
CONFIG_NSC_FIR=m
CONFIG_WINBOND_FIR=m
CONFIG_SMC_IRCC_FIR=m
CONFIG_ALI_FIR=m
CONFIG_VLSI_FIR=m
CONFIG_VIA_FIR=m
CONFIG_MCS_FIR=m
CONFIG_BT=m
CONFIG_BT_L2CAP=m
CONFIG_BT_SCO=m
CONFIG_BT_RFCOMM=m
CONFIG_BT_RFCOMM_TTY=y
CONFIG_BT_BNEP=m
CONFIG_BT_BNEP_MC_FILTER=y
CONFIG_BT_BNEP_PROTO_FILTER=y
CONFIG_BT_HIDP=m

#
# Bluetooth device drivers
#
CONFIG_BT_HCIBTUSB=m
CONFIG_BT_HCIBTSDIO=m
CONFIG_BT_HCIUART=m
CONFIG_BT_HCIUART_H4=y
CONFIG_BT_HCIUART_BCSP=y
CONFIG_BT_HCIUART_LL=y
CONFIG_BT_HCIBCM203X=m
CONFIG_BT_HCIBPA10X=m
CONFIG_BT_HCIBFUSB=m
CONFIG_BT_HCIDTL1=m
CONFIG_BT_HCIBT3C=m
CONFIG_BT_HCIBLUECARD=m
CONFIG_BT_HCIBTUART=m
CONFIG_BT_HCIVHCI=m
CONFIG_AF_RXRPC=m
# CONFIG_AF_RXRPC_DEBUG is not set
CONFIG_RXKAD=m
CONFIG_PHONET=m
CONFIG_FIB_RULES=y
CONFIG_WIRELESS=y
CONFIG_CFG80211=y
# CONFIG_CFG80211_REG_DEBUG is not set
CONFIG_NL80211=y
CONFIG_WIRELESS_OLD_REGULATORY=y
CONFIG_WIRELESS_EXT=y
CONFIG_WIRELESS_EXT_SYSFS=y
CONFIG_LIB80211=m
CONFIG_MAC80211=y

#
# Rate control algorithm selection
#
CONFIG_MAC80211_RC_MINSTREL=y
# CONFIG_MAC80211_RC_DEFAULT_PID is not set
CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
CONFIG_MAC80211_RC_DEFAULT="minstrel"
# CONFIG_MAC80211_MESH is not set
CONFIG_MAC80211_LEDS=y
CONFIG_MAC80211_DEBUGFS=y
# CONFIG_MAC80211_DEBUG_MENU is not set
CONFIG_WIMAX=m
CONFIG_WIMAX_DEBUG_LEVEL=8
CONFIG_RFKILL=m
CONFIG_RFKILL_INPUT=m
CONFIG_RFKILL_LEDS=y

#
# Device Drivers
#

#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
CONFIG_FIRMWARE_IN_KERNEL=y
CONFIG_EXTRA_FIRMWARE=""
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
CONFIG_CONNECTOR=y
CONFIG_PROC_EVENTS=y
CONFIG_MTD=m
# CONFIG_MTD_DEBUG is not set
CONFIG_MTD_CONCAT=m
CONFIG_MTD_PARTITIONS=y
CONFIG_MTD_TESTS=m
CONFIG_MTD_REDBOOT_PARTS=m
CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
# CONFIG_MTD_AR7_PARTS is not set

#
# User Modules And Translation Layers
#
CONFIG_MTD_CHAR=m
CONFIG_MTD_BLKDEVS=m
CONFIG_MTD_BLOCK=m
CONFIG_MTD_BLOCK_RO=m
CONFIG_FTL=m
CONFIG_NFTL=m
CONFIG_NFTL_RW=y
# CONFIG_INFTL is not set
CONFIG_RFD_FTL=m
# CONFIG_SSFDC is not set
CONFIG_MTD_OOPS=m

#
# RAM/ROM/Flash chip drivers
#
CONFIG_MTD_CFI=m
CONFIG_MTD_JEDECPROBE=m
CONFIG_MTD_GEN_PROBE=m
# CONFIG_MTD_CFI_ADV_OPTIONS is not set
CONFIG_MTD_MAP_BANK_WIDTH_1=y
CONFIG_MTD_MAP_BANK_WIDTH_2=y
CONFIG_MTD_MAP_BANK_WIDTH_4=y
# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
CONFIG_MTD_CFI_I1=y
CONFIG_MTD_CFI_I2=y
# CONFIG_MTD_CFI_I4 is not set
# CONFIG_MTD_CFI_I8 is not set
CONFIG_MTD_CFI_INTELEXT=m
CONFIG_MTD_CFI_AMDSTD=m
CONFIG_MTD_CFI_STAA=m
CONFIG_MTD_CFI_UTIL=m
CONFIG_MTD_RAM=m
CONFIG_MTD_ROM=m
CONFIG_MTD_ABSENT=m

#
# Mapping drivers for chip access
#
# CONFIG_MTD_COMPLEX_MAPPINGS is not set
# CONFIG_MTD_PHYSMAP is not set
CONFIG_MTD_SC520CDP=m
CONFIG_MTD_NETSC520=m
CONFIG_MTD_TS5500=m
# CONFIG_MTD_AMD76XROM is not set
# CONFIG_MTD_ICHXROM is not set
CONFIG_MTD_ESB2ROM=m
CONFIG_MTD_CK804XROM=m
CONFIG_MTD_SCB2_FLASH=m
# CONFIG_MTD_NETtel is not set
# CONFIG_MTD_DILNETPC is not set
# CONFIG_MTD_L440GX is not set
CONFIG_MTD_INTEL_VR_NOR=m
# CONFIG_MTD_PLATRAM is not set

#
# Self-contained MTD device drivers
#
# CONFIG_MTD_PMC551 is not set
# CONFIG_MTD_SLRAM is not set
# CONFIG_MTD_PHRAM is not set
CONFIG_MTD_MTDRAM=m
CONFIG_MTDRAM_TOTAL_SIZE=4096
CONFIG_MTDRAM_ERASE_SIZE=128
CONFIG_MTD_BLOCK2MTD=m

#
# Disk-On-Chip Device Drivers
#
# CONFIG_MTD_DOC2000 is not set
# CONFIG_MTD_DOC2001 is not set
# CONFIG_MTD_DOC2001PLUS is not set
CONFIG_MTD_NAND=m
# CONFIG_MTD_NAND_VERIFY_WRITE is not set
CONFIG_MTD_NAND_ECC_SMC=y
# CONFIG_MTD_NAND_MUSEUM_IDS is not set
CONFIG_MTD_NAND_IDS=m
CONFIG_MTD_NAND_DISKONCHIP=m
# CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADVANCED is not set
CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADDRESS=0
# CONFIG_MTD_NAND_DISKONCHIP_BBTWRITE is not set
# CONFIG_MTD_NAND_CAFE is not set
CONFIG_MTD_NAND_NANDSIM=m
CONFIG_MTD_NAND_PLATFORM=m
CONFIG_MTD_ALAUDA=m
# CONFIG_MTD_ONENAND is not set

#
# LPDDR flash memory drivers
#
CONFIG_MTD_LPDDR=m
CONFIG_MTD_QINFO_PROBE=m

#
# UBI - Unsorted block images
#
CONFIG_MTD_UBI=m
CONFIG_MTD_UBI_WL_THRESHOLD=4096
CONFIG_MTD_UBI_BEB_RESERVE=1
# CONFIG_MTD_UBI_GLUEBI is not set

#
# UBI debugging options
#
# CONFIG_MTD_UBI_DEBUG is not set
CONFIG_PARPORT=m
CONFIG_PARPORT_PC=m
CONFIG_PARPORT_SERIAL=m
# CONFIG_PARPORT_PC_FIFO is not set
# CONFIG_PARPORT_PC_SUPERIO is not set
CONFIG_PARPORT_PC_PCMCIA=m
# CONFIG_PARPORT_GSC is not set
# CONFIG_PARPORT_AX88796 is not set
CONFIG_PARPORT_1284=y
CONFIG_PARPORT_NOT_PC=y
CONFIG_PNP=y
CONFIG_PNP_DEBUG_MESSAGES=y

#
# Protocols
#
CONFIG_PNPACPI=y
CONFIG_BLK_DEV=y
CONFIG_BLK_DEV_FD=m
CONFIG_PARIDE=m

#
# Parallel IDE high-level drivers
#
CONFIG_PARIDE_PD=m
CONFIG_PARIDE_PCD=m
CONFIG_PARIDE_PF=m
CONFIG_PARIDE_PT=m
CONFIG_PARIDE_PG=m

#
# Parallel IDE protocol modules
#
CONFIG_PARIDE_ATEN=m
CONFIG_PARIDE_BPCK=m
CONFIG_PARIDE_COMM=m
CONFIG_PARIDE_DSTR=m
CONFIG_PARIDE_FIT2=m
CONFIG_PARIDE_FIT3=m
CONFIG_PARIDE_EPAT=m
CONFIG_PARIDE_EPATC8=y
CONFIG_PARIDE_EPIA=m
CONFIG_PARIDE_FRIQ=m
CONFIG_PARIDE_FRPW=m
CONFIG_PARIDE_KBIC=m
CONFIG_PARIDE_KTTI=m
CONFIG_PARIDE_ON20=m
CONFIG_PARIDE_ON26=m
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_CRYPTOLOOP=m
CONFIG_BLK_DEV_NBD=m
# CONFIG_BLK_DEV_SX8 is not set
CONFIG_BLK_DEV_UB=m
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=16384
# CONFIG_BLK_DEV_XIP is not set
CONFIG_CDROM_PKTCDVD=m
CONFIG_CDROM_PKTCDVD_BUFFERS=8
# CONFIG_CDROM_PKTCDVD_WCACHE is not set
CONFIG_ATA_OVER_ETH=m
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_IBM_ASM is not set
# CONFIG_PHANTOM is not set
# CONFIG_SGI_IOC4 is not set
CONFIG_TIFM_CORE=m
CONFIG_TIFM_7XX1=m
# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
# CONFIG_C2PORT is not set

#
# EEPROM support
#
CONFIG_EEPROM_AT24=m
CONFIG_EEPROM_LEGACY=m
CONFIG_EEPROM_93CX6=m
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set

#
# SCSI device support
#
CONFIG_RAID_ATTRS=m
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
CONFIG_SCSI_TGT=m
CONFIG_SCSI_NETLINK=y
CONFIG_SCSI_PROC_FS=y

#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
CONFIG_CHR_DEV_ST=m
CONFIG_CHR_DEV_OSST=m
CONFIG_BLK_DEV_SR=y
CONFIG_BLK_DEV_SR_VENDOR=y
CONFIG_CHR_DEV_SG=m
CONFIG_CHR_DEV_SCH=m

#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
CONFIG_SCSI_MULTI_LUN=y
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_LOGGING=y
# CONFIG_SCSI_SCAN_ASYNC is not set
CONFIG_SCSI_WAIT_SCAN=m

#
# SCSI Transports
#
CONFIG_SCSI_SPI_ATTRS=m
CONFIG_SCSI_FC_ATTRS=m
# CONFIG_SCSI_FC_TGT_ATTRS is not set
CONFIG_SCSI_ISCSI_ATTRS=m
CONFIG_SCSI_SAS_ATTRS=m
CONFIG_SCSI_SAS_LIBSAS=m
CONFIG_SCSI_SAS_ATA=y
CONFIG_SCSI_SAS_HOST_SMP=y
# CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set
# CONFIG_SCSI_SRP_ATTRS is not set
CONFIG_SCSI_LOWLEVEL=y
CONFIG_ISCSI_TCP=m
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_AIC94XX is not set
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_ARCMSR is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_LIBFC is not set
# CONFIG_FCOE is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
CONFIG_SCSI_GDTH=m
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_PPA is not set
# CONFIG_SCSI_IMM is not set
# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_STEX is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
# CONFIG_SCSI_QLA_FC is not set
# CONFIG_SCSI_QLA_ISCSI is not set
# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_DEBUG is not set
CONFIG_SCSI_SRP=m
CONFIG_SCSI_LOWLEVEL_PCMCIA=y
CONFIG_PCMCIA_FDOMAIN=m
CONFIG_PCMCIA_QLOGIC=m
CONFIG_PCMCIA_SYM53C500=m
CONFIG_SCSI_DH=m
# CONFIG_SCSI_DH_RDAC is not set
# CONFIG_SCSI_DH_HP_SW is not set
# CONFIG_SCSI_DH_EMC is not set
# CONFIG_SCSI_DH_ALUA is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_ATA_ACPI=y
CONFIG_SATA_PMP=y
CONFIG_SATA_AHCI=y
# CONFIG_SATA_SIL24 is not set
CONFIG_ATA_SFF=y
# CONFIG_SATA_SVW is not set
CONFIG_ATA_PIIX=y
# CONFIG_SATA_MV is not set
# CONFIG_SATA_NV is not set
# CONFIG_PDC_ADMA is not set
# CONFIG_SATA_QSTOR is not set
# CONFIG_SATA_PROMISE is not set
# CONFIG_SATA_SX4 is not set
# CONFIG_SATA_SIL is not set
# CONFIG_SATA_SIS is not set
# CONFIG_SATA_ULI is not set
# CONFIG_SATA_VIA is not set
# CONFIG_SATA_VITESSE is not set
# CONFIG_SATA_INIC162X is not set
# CONFIG_PATA_ACPI is not set
# CONFIG_PATA_ALI is not set
# CONFIG_PATA_AMD is not set
# CONFIG_PATA_ARTOP is not set
# CONFIG_PATA_ATIIXP is not set
# CONFIG_PATA_CMD640_PCI is not set
# CONFIG_PATA_CMD64X is not set
# CONFIG_PATA_CS5520 is not set
# CONFIG_PATA_CS5530 is not set
# CONFIG_PATA_CYPRESS is not set
# CONFIG_PATA_EFAR is not set
CONFIG_ATA_GENERIC=m
# CONFIG_PATA_HPT366 is not set
# CONFIG_PATA_HPT37X is not set
# CONFIG_PATA_HPT3X2N is not set
# CONFIG_PATA_HPT3X3 is not set
# CONFIG_PATA_IT821X is not set
# CONFIG_PATA_IT8213 is not set
# CONFIG_PATA_JMICRON is not set
# CONFIG_PATA_TRIFLEX is not set
# CONFIG_PATA_MARVELL is not set
CONFIG_PATA_MPIIX=m
CONFIG_PATA_OLDPIIX=m
# CONFIG_PATA_NETCELL is not set
# CONFIG_PATA_NINJA32 is not set
# CONFIG_PATA_NS87410 is not set
# CONFIG_PATA_NS87415 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_OPTIDMA is not set
CONFIG_PATA_PCMCIA=m
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_RADISYS is not set
# CONFIG_PATA_RZ1000 is not set
# CONFIG_PATA_SC1200 is not set
# CONFIG_PATA_SERVERWORKS is not set
# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_SIL680 is not set
# CONFIG_PATA_SIS is not set
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set
CONFIG_PATA_SCH=m
CONFIG_MD=y
CONFIG_BLK_DEV_MD=y
CONFIG_MD_AUTODETECT=y
CONFIG_MD_LINEAR=m
CONFIG_MD_RAID0=m
CONFIG_MD_RAID1=m
CONFIG_MD_RAID10=m
CONFIG_MD_RAID456=m
CONFIG_MD_RAID5_RESHAPE=y
CONFIG_MD_MULTIPATH=m
CONFIG_MD_FAULTY=m
CONFIG_BLK_DEV_DM=y
# CONFIG_DM_DEBUG is not set
CONFIG_DM_CRYPT=m
CONFIG_DM_SNAPSHOT=m
CONFIG_DM_MIRROR=m
CONFIG_DM_ZERO=m
CONFIG_DM_MULTIPATH=m
CONFIG_DM_DELAY=m
# CONFIG_DM_UEVENT is not set
CONFIG_FUSION=y
CONFIG_FUSION_SPI=m
CONFIG_FUSION_FC=m
CONFIG_FUSION_SAS=m
CONFIG_FUSION_MAX_SGE=40
CONFIG_FUSION_CTL=m
# CONFIG_FUSION_LOGGING is not set

#
# IEEE 1394 (FireWire) support
#

#
# Enable only one of the two stacks, unless you know what you are doing
#
CONFIG_FIREWIRE=m
CONFIG_FIREWIRE_OHCI=m
CONFIG_FIREWIRE_OHCI_DEBUG=y
CONFIG_FIREWIRE_SBP2=m
# CONFIG_IEEE1394 is not set
CONFIG_I2O=m
# CONFIG_I2O_LCT_NOTIFY_ON_CHANGES is not set
CONFIG_I2O_EXT_ADAPTEC=y
CONFIG_I2O_EXT_ADAPTEC_DMA64=y
CONFIG_I2O_BUS=m
CONFIG_I2O_BLOCK=m
CONFIG_I2O_SCSI=m
CONFIG_I2O_PROC=m
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
CONFIG_IFB=m
CONFIG_DUMMY=m
CONFIG_BONDING=m
# CONFIG_MACVLAN is not set
# CONFIG_EQUALIZER is not set
CONFIG_TUN=m
CONFIG_VETH=m
# CONFIG_NET_SB1000 is not set
# CONFIG_ARCNET is not set
# CONFIG_NET_ETHERNET is not set
CONFIG_MII=m
CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
CONFIG_DL2K=m
CONFIG_E1000=m
CONFIG_E1000E=m
# CONFIG_IP1000 is not set
CONFIG_IGB=m
# CONFIG_IGB_LRO is not set
CONFIG_IGB_DCA=y
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
# CONFIG_JME is not set
# CONFIG_NETDEV_10000 is not set
# CONFIG_TR is not set

#
# Wireless LAN
#
# CONFIG_WLAN_PRE80211 is not set
CONFIG_WLAN_80211=y
# CONFIG_PCMCIA_RAYCS is not set
# CONFIG_LIBERTAS is not set
# CONFIG_LIBERTAS_THINFIRM is not set
# CONFIG_AIRO is not set
CONFIG_HERMES=m
CONFIG_HERMES_CACHE_FW_ON_INIT=y
# CONFIG_PLX_HERMES is not set
# CONFIG_TMD_HERMES is not set
# CONFIG_NORTEL_HERMES is not set
# CONFIG_PCI_HERMES is not set
CONFIG_PCMCIA_HERMES=m
CONFIG_PCMCIA_SPECTRUM=m
CONFIG_ATMEL=m
# CONFIG_PCI_ATMEL is not set
CONFIG_PCMCIA_ATMEL=m
CONFIG_AIRO_CS=m
CONFIG_PCMCIA_WL3501=m
# CONFIG_PRISM54 is not set
CONFIG_USB_ZD1201=m
CONFIG_USB_NET_RNDIS_WLAN=m
# CONFIG_RTL8180 is not set
# CONFIG_RTL8187 is not set
# CONFIG_ADM8211 is not set
# CONFIG_MAC80211_HWSIM is not set
# CONFIG_P54_COMMON is not set
# CONFIG_ATH5K is not set
# CONFIG_ATH9K is not set
# CONFIG_IPW2100 is not set
# CONFIG_IPW2200 is not set
CONFIG_IWLWIFI=m
CONFIG_IWLCORE=m
# CONFIG_IWLWIFI_LEDS is not set
CONFIG_IWLWIFI_RFKILL=y
# CONFIG_IWLWIFI_DEBUG is not set
# CONFIG_IWLAGN is not set
CONFIG_IWL3945=m
# CONFIG_IWL3945_RFKILL is not set
CONFIG_IWL3945_SPECTRUM_MEASUREMENT=y
CONFIG_IWL3945_LEDS=y
# CONFIG_IWL3945_DEBUG is not set
# CONFIG_HOSTAP is not set
CONFIG_B43=m
CONFIG_B43_PCI_AUTOSELECT=y
CONFIG_B43_PCICORE_AUTOSELECT=y
# CONFIG_B43_PCMCIA is not set
CONFIG_B43_LEDS=y
CONFIG_B43_RFKILL=y
# CONFIG_B43_DEBUG is not set
CONFIG_B43LEGACY=m
CONFIG_B43LEGACY_PCI_AUTOSELECT=y
CONFIG_B43LEGACY_PCICORE_AUTOSELECT=y
CONFIG_B43LEGACY_LEDS=y
CONFIG_B43LEGACY_RFKILL=y
CONFIG_B43LEGACY_DEBUG=y
CONFIG_B43LEGACY_DMA=y
CONFIG_B43LEGACY_PIO=y
CONFIG_B43LEGACY_DMA_AND_PIO_MODE=y
# CONFIG_B43LEGACY_DMA_MODE is not set
# CONFIG_B43LEGACY_PIO_MODE is not set
# CONFIG_ZD1211RW is not set

#
# WiMAX Wireless Broadband devices
#
CONFIG_WIMAX_I2400M=m
CONFIG_WIMAX_I2400M_SDIO=m
CONFIG_WIMAX_I2400M_DEBUG_LEVEL=8

#
# USB Network Adapters
#
CONFIG_USB_CATC=m
CONFIG_USB_KAWETH=m
CONFIG_USB_PEGASUS=m
CONFIG_USB_RTL8150=m
CONFIG_USB_USBNET=m
CONFIG_USB_NET_AX8817X=m
CONFIG_USB_NET_CDCETHER=m
CONFIG_USB_NET_DM9601=m
# CONFIG_USB_NET_SMSC95XX is not set
CONFIG_USB_NET_GL620A=m
CONFIG_USB_NET_NET1080=m
CONFIG_USB_NET_PLUSB=m
CONFIG_USB_NET_MCS7830=m
CONFIG_USB_NET_RNDIS_HOST=m
CONFIG_USB_NET_CDC_SUBSET=m
CONFIG_USB_ALI_M5632=y
CONFIG_USB_AN2720=y
CONFIG_USB_BELKIN=y
CONFIG_USB_ARMLINUX=y
CONFIG_USB_EPSON2888=y
CONFIG_USB_KC2190=y
CONFIG_USB_NET_ZAURUS=m
CONFIG_USB_HSO=m
CONFIG_NET_PCMCIA=y
CONFIG_PCMCIA_3C589=m
CONFIG_PCMCIA_3C574=m
CONFIG_PCMCIA_FMVJ18X=m
CONFIG_PCMCIA_PCNET=m
CONFIG_PCMCIA_NMCLAN=m
CONFIG_PCMCIA_SMC91C92=m
CONFIG_PCMCIA_XIRC2PS=m
CONFIG_PCMCIA_AXNET=m
# CONFIG_WAN is not set
# CONFIG_ATM_DRIVERS is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PLIP is not set
CONFIG_PPP=m
CONFIG_PPP_MULTILINK=y
CONFIG_PPP_FILTER=y
CONFIG_PPP_ASYNC=m
CONFIG_PPP_SYNC_TTY=m
CONFIG_PPP_DEFLATE=m
# CONFIG_PPP_BSDCOMP is not set
CONFIG_PPP_MPPE=m
CONFIG_PPPOE=m
CONFIG_PPPOATM=m
CONFIG_PPPOL2TP=m
CONFIG_SLIP=m
CONFIG_SLIP_COMPRESSED=y
CONFIG_SLHC=m
CONFIG_SLIP_SMART=y
# CONFIG_SLIP_MODE_SLIP6 is not set
# CONFIG_NET_FC is not set
CONFIG_NETCONSOLE=m
# CONFIG_NETCONSOLE_DYNAMIC is not set
CONFIG_NETPOLL=y
CONFIG_NETPOLL_TRAP=y
CONFIG_NET_POLL_CONTROLLER=y
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set

#
# Input device support
#
CONFIG_INPUT=y
CONFIG_INPUT_FF_MEMLESS=y
CONFIG_INPUT_POLLDEV=m

#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
CONFIG_INPUT_JOYDEV=m
CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set

#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
CONFIG_MOUSE_PS2_LIFEBOOK=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
# CONFIG_MOUSE_PS2_ELANTECH is not set
CONFIG_MOUSE_PS2_TOUCHKIT=y
CONFIG_MOUSE_SERIAL=m
# CONFIG_MOUSE_APPLETOUCH is not set
# CONFIG_MOUSE_BCM5974 is not set
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TABLET is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
CONFIG_INPUT_MISC=y
CONFIG_INPUT_PCSPKR=m
# CONFIG_INPUT_APANEL is not set
CONFIG_INPUT_ATLAS_BTNS=m
# CONFIG_INPUT_ATI_REMOTE is not set
# CONFIG_INPUT_ATI_REMOTE2 is not set
# CONFIG_INPUT_KEYSPAN_REMOTE is not set
# CONFIG_INPUT_POWERMATE is not set
# CONFIG_INPUT_YEALINK is not set
# CONFIG_INPUT_CM109 is not set
CONFIG_INPUT_UINPUT=m

#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=y
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PARKBD is not set
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
CONFIG_SERIO_RAW=m
CONFIG_GAMEPORT=m
CONFIG_GAMEPORT_NS558=m
CONFIG_GAMEPORT_L4=m
CONFIG_GAMEPORT_EMU10K1=m
CONFIG_GAMEPORT_FM801=m

#
# Character devices
#
CONFIG_VT=y
CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_NOZOMI is not set

#
# Serial drivers
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_FIX_EARLYCON_MEM=y
CONFIG_SERIAL_8250_PCI=y
CONFIG_SERIAL_8250_PNP=y
CONFIG_SERIAL_8250_CS=m
CONFIG_SERIAL_8250_NR_UARTS=32
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
CONFIG_SERIAL_8250_DETECT_IRQ=y
CONFIG_SERIAL_8250_RSA=y

#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_SERIAL_JSM=m
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
# CONFIG_LEGACY_PTYS is not set
CONFIG_PRINTER=m
CONFIG_LP_CONSOLE=y
CONFIG_PPDEV=m
CONFIG_IPMI_HANDLER=m
# CONFIG_IPMI_PANIC_EVENT is not set
CONFIG_IPMI_DEVICE_INTERFACE=m
CONFIG_IPMI_SI=m
CONFIG_IPMI_WATCHDOG=m
CONFIG_IPMI_POWEROFF=m
CONFIG_HW_RANDOM=y
CONFIG_HW_RANDOM_INTEL=m
CONFIG_HW_RANDOM_AMD=m
CONFIG_NVRAM=y
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set

#
# PCMCIA character devices
#
# CONFIG_SYNCLINK_CS is not set
CONFIG_CARDMAN_4000=m
CONFIG_CARDMAN_4040=m
# CONFIG_IPWIRELESS is not set
# CONFIG_MWAVE is not set
CONFIG_PC8736x_GPIO=m
CONFIG_NSC_GPIO=m
CONFIG_RAW_DRIVER=y
CONFIG_MAX_RAW_DEVS=8192
CONFIG_HPET=y
CONFIG_HPET_MMAP=y
CONFIG_HANGCHECK_TIMER=m
# CONFIG_TCG_TPM is not set
# CONFIG_TELCLOCK is not set
CONFIG_DEVPORT=y
CONFIG_I2C=m
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=m
CONFIG_I2C_HELPER_AUTO=y
CONFIG_I2C_ALGOBIT=m
CONFIG_I2C_ALGOPCA=m

#
# I2C Hardware Bus support
#

#
# PC SMBus host controller drivers
#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not set
CONFIG_I2C_AMD756=m
CONFIG_I2C_AMD8111=m
CONFIG_I2C_I801=m
CONFIG_I2C_ISCH=m
# CONFIG_I2C_PIIX4 is not set
CONFIG_I2C_NFORCE2=m
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
CONFIG_I2C_SIS96X=m
CONFIG_I2C_VIA=m
CONFIG_I2C_VIAPRO=m

#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
# CONFIG_I2C_OCORES is not set
CONFIG_I2C_SIMTEC=m

#
# External I2C/SMBus adapter drivers
#
CONFIG_I2C_PARPORT=m
CONFIG_I2C_PARPORT_LIGHT=m
CONFIG_I2C_TAOS_EVM=m
CONFIG_I2C_TINY_USB=m

#
# Graphics adapter I2C/DDC channel drivers
#
CONFIG_I2C_VOODOO3=m

#
# Other I2C/SMBus bus drivers
#
CONFIG_I2C_PCA_PLATFORM=m
CONFIG_I2C_STUB=m

#
# Miscellaneous I2C Chip support
#
CONFIG_DS1682=m
CONFIG_SENSORS_PCF8574=m
CONFIG_PCF8575=m
# CONFIG_SENSORS_PCA9539 is not set
CONFIG_SENSORS_PCF8591=m
CONFIG_SENSORS_MAX6875=m
CONFIG_SENSORS_TSL2550=m
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
# CONFIG_SPI is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
# CONFIG_GPIOLIB is not set
CONFIG_W1=m
CONFIG_W1_CON=y

#
# 1-wire Bus Masters
#
CONFIG_W1_MASTER_MATROX=m
CONFIG_W1_MASTER_DS2490=m
CONFIG_W1_MASTER_DS2482=m

#
# 1-wire Slaves
#
CONFIG_W1_SLAVE_THERM=m
CONFIG_W1_SLAVE_SMEM=m
CONFIG_W1_SLAVE_DS2433=m
CONFIG_W1_SLAVE_DS2433_CRC=y
CONFIG_W1_SLAVE_DS2760=m
# CONFIG_W1_SLAVE_BQ27000 is not set
CONFIG_POWER_SUPPLY=y
# CONFIG_POWER_SUPPLY_DEBUG is not set
CONFIG_PDA_POWER=m
CONFIG_BATTERY_DS2760=m
# CONFIG_BATTERY_BQ27x00 is not set
CONFIG_HWMON=m
# CONFIG_HWMON_VID is not set
# CONFIG_SENSORS_ABITUGURU is not set
# CONFIG_SENSORS_ABITUGURU3 is not set
# CONFIG_SENSORS_AD7414 is not set
# CONFIG_SENSORS_AD7418 is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1026 is not set
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
# CONFIG_SENSORS_ADT7462 is not set
# CONFIG_SENSORS_ADT7470 is not set
# CONFIG_SENSORS_ADT7473 is not set
# CONFIG_SENSORS_ADT7475 is not set
# CONFIG_SENSORS_K8TEMP is not set
# CONFIG_SENSORS_ASB100 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_I5K_AMB is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_F75375S is not set
# CONFIG_SENSORS_FSCHER is not set
# CONFIG_SENSORS_FSCPOS is not set
# CONFIG_SENSORS_FSCHMD is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
CONFIG_SENSORS_CORETEMP=m
CONFIG_SENSORS_IBMAEM=m
# CONFIG_SENSORS_IBMPEX is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM63 is not set
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
# CONFIG_SENSORS_LM80 is not set
# CONFIG_SENSORS_LM83 is not set
# CONFIG_SENSORS_LM85 is not set
# CONFIG_SENSORS_LM87 is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_LM93 is not set
# CONFIG_SENSORS_LTC4245 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_DME1737 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_ADS7828 is not set
CONFIG_SENSORS_THMC50=m
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_VT8231 is not set
# CONFIG_SENSORS_W83781D is not set
# CONFIG_SENSORS_W83791D is not set
# CONFIG_SENSORS_W83792D is not set
# CONFIG_SENSORS_W83793 is not set
# CONFIG_SENSORS_W83L785TS is not set
# CONFIG_SENSORS_W83L786NG is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
CONFIG_SENSORS_HDAPS=m
# CONFIG_SENSORS_LIS3LV02D is not set
# CONFIG_SENSORS_APPLESMC is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
CONFIG_THERMAL=y
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set

#
# Watchdog Device Drivers
#
CONFIG_SOFT_WATCHDOG=m
# CONFIG_ACQUIRE_WDT is not set
# CONFIG_ADVANTECH_WDT is not set
CONFIG_ALIM1535_WDT=m
CONFIG_ALIM7101_WDT=m
# CONFIG_SC520_WDT is not set
# CONFIG_EUROTECH_WDT is not set
# CONFIG_IB700_WDT is not set
CONFIG_IBMASR=m
# CONFIG_WAFER_WDT is not set
CONFIG_I6300ESB_WDT=m
CONFIG_ITCO_WDT=m
CONFIG_ITCO_VENDOR_SUPPORT=y
CONFIG_IT8712F_WDT=m
# CONFIG_IT87_WDT is not set
# CONFIG_HP_WATCHDOG is not set
# CONFIG_SC1200_WDT is not set
CONFIG_PC87413_WDT=m
# CONFIG_60XX_WDT is not set
# CONFIG_SBC8360_WDT is not set
# CONFIG_CPU5_WDT is not set
# CONFIG_SMSC_SCH311X_WDT is not set
# CONFIG_SMSC37B787_WDT is not set
CONFIG_W83627HF_WDT=m
CONFIG_W83697HF_WDT=m
# CONFIG_W83697UG_WDT is not set
CONFIG_W83877F_WDT=m
CONFIG_W83977F_WDT=m
CONFIG_MACHZ_WDT=m
# CONFIG_SBC_EPX_C3_WATCHDOG is not set

#
# PCI-based Watchdog Cards
#
CONFIG_PCIPCWATCHDOG=m
CONFIG_WDTPCI=m
CONFIG_WDT_501_PCI=y

#
# USB-based Watchdog Cards
#
CONFIG_USBPCWATCHDOG=m
CONFIG_SSB_POSSIBLE=y

#
# Sonics Silicon Backplane
#
CONFIG_SSB=m
CONFIG_SSB_SPROM=y
CONFIG_SSB_PCIHOST_POSSIBLE=y
CONFIG_SSB_PCIHOST=y
CONFIG_SSB_B43_PCI_BRIDGE=y
CONFIG_SSB_PCMCIAHOST_POSSIBLE=y
# CONFIG_SSB_PCMCIAHOST is not set
# CONFIG_SSB_DEBUG is not set
CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y
CONFIG_SSB_DRIVER_PCICORE=y

#
# Multifunction device drivers
#
# CONFIG_MFD_CORE is not set
CONFIG_MFD_SM501=m
CONFIG_HTC_PASIC3=m
# CONFIG_MFD_TMIO is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_PCF50633 is not set
CONFIG_REGULATOR=y
# CONFIG_REGULATOR_DEBUG is not set
# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
CONFIG_REGULATOR_VIRTUAL_CONSUMER=m
CONFIG_REGULATOR_BQ24022=m

#
# Multimedia devices
#

#
# Multimedia core support
#
CONFIG_VIDEO_DEV=m
CONFIG_VIDEO_V4L2_COMMON=m
CONFIG_VIDEO_ALLOW_V4L1=y
CONFIG_VIDEO_V4L1_COMPAT=y
CONFIG_DVB_CORE=m
CONFIG_VIDEO_MEDIA=m

#
# Multimedia drivers
#
CONFIG_VIDEO_SAA7146=m
CONFIG_VIDEO_SAA7146_VV=m
# CONFIG_MEDIA_ATTACH is not set
CONFIG_MEDIA_TUNER=m
# CONFIG_MEDIA_TUNER_CUSTOMIZE is not set
CONFIG_MEDIA_TUNER_SIMPLE=m
CONFIG_MEDIA_TUNER_TDA8290=m
CONFIG_MEDIA_TUNER_TDA827X=m
CONFIG_MEDIA_TUNER_TDA18271=m
CONFIG_MEDIA_TUNER_TDA9887=m
CONFIG_MEDIA_TUNER_TEA5761=m
CONFIG_MEDIA_TUNER_TEA5767=m
CONFIG_MEDIA_TUNER_MT20XX=m
CONFIG_MEDIA_TUNER_MT2060=m
CONFIG_MEDIA_TUNER_MT2266=m
CONFIG_MEDIA_TUNER_MT2131=m
CONFIG_MEDIA_TUNER_QT1010=m
CONFIG_MEDIA_TUNER_XC2028=m
CONFIG_MEDIA_TUNER_XC5000=m
CONFIG_MEDIA_TUNER_MXL5005S=m
CONFIG_MEDIA_TUNER_MXL5007T=m
CONFIG_VIDEO_V4L2=m
CONFIG_VIDEO_V4L1=m
CONFIG_VIDEOBUF_GEN=m
CONFIG_VIDEOBUF_DMA_SG=m
CONFIG_VIDEOBUF_VMALLOC=m
CONFIG_VIDEOBUF_DVB=m
CONFIG_VIDEO_BTCX=m
CONFIG_VIDEO_IR=m
CONFIG_VIDEO_TVEEPROM=m
CONFIG_VIDEO_TUNER=m
CONFIG_VIDEO_CAPTURE_DRIVERS=y
# CONFIG_VIDEO_ADV_DEBUG is not set
# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
CONFIG_VIDEO_IR_I2C=m
CONFIG_VIDEO_TVAUDIO=m
CONFIG_VIDEO_TDA7432=m
CONFIG_VIDEO_TDA9875=m
CONFIG_VIDEO_MSP3400=m
CONFIG_VIDEO_CS5345=m
CONFIG_VIDEO_CS53L32A=m
CONFIG_VIDEO_M52790=m
CONFIG_VIDEO_WM8775=m
CONFIG_VIDEO_WM8739=m
CONFIG_VIDEO_VP27SMPX=m
CONFIG_VIDEO_OV7670=m
CONFIG_VIDEO_SAA711X=m
CONFIG_VIDEO_SAA717X=m
CONFIG_VIDEO_TVP5150=m
CONFIG_VIDEO_CX25840=m
CONFIG_VIDEO_CX2341X=m
CONFIG_VIDEO_SAA7127=m
CONFIG_VIDEO_UPD64031A=m
CONFIG_VIDEO_UPD64083=m
# CONFIG_VIDEO_VIVI is not set
CONFIG_VIDEO_BT848=m
# CONFIG_VIDEO_BT848_DVB is not set
CONFIG_VIDEO_SAA6588=m
# CONFIG_VIDEO_BWQCAM is not set
# CONFIG_VIDEO_CQCAM is not set
# CONFIG_VIDEO_W9966 is not set
# CONFIG_VIDEO_CPIA is not set
CONFIG_VIDEO_CPIA2=m
# CONFIG_VIDEO_SAA5246A is not set
# CONFIG_VIDEO_SAA5249 is not set
# CONFIG_VIDEO_STRADIS is not set
# CONFIG_VIDEO_ZORAN is not set
# CONFIG_VIDEO_SAA7134 is not set
# CONFIG_VIDEO_MXB is not set
# CONFIG_VIDEO_HEXIUM_ORION is not set
# CONFIG_VIDEO_HEXIUM_GEMINI is not set
CONFIG_VIDEO_CX23885=m
CONFIG_VIDEO_AU0828=m
CONFIG_VIDEO_IVTV=m
CONFIG_VIDEO_FB_IVTV=m
CONFIG_VIDEO_CX18=m
CONFIG_VIDEO_CAFE_CCIC=m
CONFIG_SOC_CAMERA=m
CONFIG_SOC_CAMERA_MT9M001=m
# CONFIG_SOC_CAMERA_MT9M111 is not set
# CONFIG_SOC_CAMERA_MT9T031 is not set
CONFIG_SOC_CAMERA_MT9V022=m
# CONFIG_SOC_CAMERA_TW9910 is not set
# CONFIG_SOC_CAMERA_PLATFORM is not set
# CONFIG_SOC_CAMERA_OV772X is not set
CONFIG_V4L_USB_DRIVERS=y
CONFIG_USB_VIDEO_CLASS=m
CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y
CONFIG_USB_GSPCA=m
# CONFIG_USB_M5602 is not set
# CONFIG_USB_STV06XX is not set
# CONFIG_USB_GSPCA_CONEX is not set
# CONFIG_USB_GSPCA_ETOMS is not set
# CONFIG_USB_GSPCA_FINEPIX is not set
# CONFIG_USB_GSPCA_MARS is not set
# CONFIG_USB_GSPCA_OV519 is not set
# CONFIG_USB_GSPCA_OV534 is not set
# CONFIG_USB_GSPCA_PAC207 is not set
# CONFIG_USB_GSPCA_PAC7311 is not set
# CONFIG_USB_GSPCA_SONIXB is not set
# CONFIG_USB_GSPCA_SONIXJ is not set
# CONFIG_USB_GSPCA_SPCA500 is not set
# CONFIG_USB_GSPCA_SPCA501 is not set
# CONFIG_USB_GSPCA_SPCA505 is not set
# CONFIG_USB_GSPCA_SPCA506 is not set
# CONFIG_USB_GSPCA_SPCA508 is not set
# CONFIG_USB_GSPCA_SPCA561 is not set
# CONFIG_USB_GSPCA_STK014 is not set
# CONFIG_USB_GSPCA_SUNPLUS is not set
# CONFIG_USB_GSPCA_T613 is not set
# CONFIG_USB_GSPCA_TV8532 is not set
# CONFIG_USB_GSPCA_VC032X is not set
# CONFIG_USB_GSPCA_ZC3XX is not set
CONFIG_VIDEO_PVRUSB2=m
CONFIG_VIDEO_PVRUSB2_SYSFS=y
CONFIG_VIDEO_PVRUSB2_DVB=y
# CONFIG_VIDEO_PVRUSB2_DEBUGIFC is not set
CONFIG_VIDEO_EM28XX=m
# CONFIG_VIDEO_EM28XX_ALSA is not set
CONFIG_VIDEO_EM28XX_DVB=m
CONFIG_VIDEO_USBVISION=m
CONFIG_VIDEO_USBVIDEO=m
CONFIG_USB_VICAM=m
CONFIG_USB_IBMCAM=m
CONFIG_USB_KONICAWC=m
CONFIG_USB_QUICKCAM_MESSENGER=m
CONFIG_USB_ET61X251=m
CONFIG_VIDEO_OVCAMCHIP=m
CONFIG_USB_W9968CF=m
CONFIG_USB_OV511=m
CONFIG_USB_SE401=m
CONFIG_USB_SN9C102=m
CONFIG_USB_STV680=m
CONFIG_USB_ZC0301=m
CONFIG_USB_PWC=m
# CONFIG_USB_PWC_DEBUG is not set
CONFIG_USB_ZR364XX=m
# CONFIG_USB_STKWEBCAM is not set
# CONFIG_USB_S2255 is not set
CONFIG_RADIO_ADAPTERS=y
# CONFIG_RADIO_GEMTEK_PCI is not set
# CONFIG_RADIO_MAXIRADIO is not set
# CONFIG_RADIO_MAESTRO is not set
CONFIG_USB_DSBR=m
# CONFIG_USB_SI470X is not set
# CONFIG_USB_MR800 is not set
# CONFIG_RADIO_TEA5764 is not set
# CONFIG_DVB_DYNAMIC_MINORS is not set
CONFIG_DVB_CAPTURE_DRIVERS=y

#
# Supported SAA7146 based PCI Adapters
#
CONFIG_TTPCI_EEPROM=m
CONFIG_DVB_AV7110=m
CONFIG_DVB_AV7110_OSD=y
# CONFIG_DVB_BUDGET_CORE is not set

#
# Supported USB Adapters
#
CONFIG_DVB_USB=m
# CONFIG_DVB_USB_DEBUG is not set
# CONFIG_DVB_USB_A800 is not set
CONFIG_DVB_USB_DIBUSB_MB=m
# CONFIG_DVB_USB_DIBUSB_MB_FAULTY is not set
CONFIG_DVB_USB_DIBUSB_MC=m
CONFIG_DVB_USB_DIB0700=m
CONFIG_DVB_USB_UMT_010=m
CONFIG_DVB_USB_CXUSB=m
CONFIG_DVB_USB_M920X=m
CONFIG_DVB_USB_GL861=m
CONFIG_DVB_USB_AU6610=m
CONFIG_DVB_USB_DIGITV=m
CONFIG_DVB_USB_VP7045=m
CONFIG_DVB_USB_VP702X=m
CONFIG_DVB_USB_GP8PSK=m
CONFIG_DVB_USB_NOVA_T_USB2=m
CONFIG_DVB_USB_TTUSB2=m
CONFIG_DVB_USB_DTT200U=m
CONFIG_DVB_USB_OPERA1=m
# CONFIG_DVB_USB_DW2102 is not set
# CONFIG_DVB_USB_CINERGY_T2 is not set
# CONFIG_DVB_USB_ANYSEE is not set
# CONFIG_DVB_USB_DTV5100 is not set
# CONFIG_DVB_USB_AF9015 is not set
CONFIG_DVB_TTUSB_BUDGET=m
CONFIG_DVB_TTUSB_DEC=m
# CONFIG_DVB_SIANO_SMS1XXX is not set

#
# Supported FlexCopII (B2C2) Adapters
#
CONFIG_DVB_B2C2_FLEXCOP=m
# CONFIG_DVB_B2C2_FLEXCOP_PCI is not set
# CONFIG_DVB_B2C2_FLEXCOP_USB is not set
# CONFIG_DVB_B2C2_FLEXCOP_DEBUG is not set

#
# Supported BT878 Adapters
#
CONFIG_DVB_BT8XX=m

#
# Supported Pluto2 Adapters
#
CONFIG_DVB_PLUTO2=m

#
# Supported SDMC DM1105 Adapters
#
# CONFIG_DVB_DM1105 is not set

#
# Supported DVB Frontends
#

#
# Customise DVB Frontends
#
# CONFIG_DVB_FE_CUSTOMISE is not set

#
# Multistandard (satellite) frontends
#
# CONFIG_DVB_STB0899 is not set
# CONFIG_DVB_STB6100 is not set

#
# DVB-S (satellite) frontends
#
CONFIG_DVB_CX24110=m
CONFIG_DVB_CX24123=m
CONFIG_DVB_MT312=m
CONFIG_DVB_S5H1420=m
# CONFIG_DVB_STV0288 is not set
# CONFIG_DVB_STB6000 is not set
CONFIG_DVB_STV0299=m
CONFIG_DVB_TDA8083=m
CONFIG_DVB_TDA10086=m
# CONFIG_DVB_TDA8261 is not set
CONFIG_DVB_VES1X93=m
CONFIG_DVB_TUNER_ITD1000=m
CONFIG_DVB_TUNER_CX24113=m
CONFIG_DVB_TDA826X=m
CONFIG_DVB_TUA6100=m
# CONFIG_DVB_CX24116 is not set
# CONFIG_DVB_SI21XX is not set

#
# DVB-T (terrestrial) frontends
#
CONFIG_DVB_SP8870=m
CONFIG_DVB_SP887X=m
CONFIG_DVB_CX22700=m
CONFIG_DVB_CX22702=m
# CONFIG_DVB_DRX397XD is not set
CONFIG_DVB_L64781=m
CONFIG_DVB_TDA1004X=m
CONFIG_DVB_NXT6000=m
CONFIG_DVB_MT352=m
CONFIG_DVB_ZL10353=m
CONFIG_DVB_DIB3000MB=m
CONFIG_DVB_DIB3000MC=m
CONFIG_DVB_DIB7000M=m
CONFIG_DVB_DIB7000P=m
CONFIG_DVB_TDA10048=m

#
# DVB-C (cable) frontends
#
CONFIG_DVB_VES1820=m
CONFIG_DVB_TDA10021=m
CONFIG_DVB_TDA10023=m
CONFIG_DVB_STV0297=m

#
# ATSC (North American/Korean Terrestrial/Cable DTV) frontends
#
CONFIG_DVB_NXT200X=m
CONFIG_DVB_OR51211=m
CONFIG_DVB_OR51132=m
CONFIG_DVB_BCM3510=m
CONFIG_DVB_LGDT330X=m
# CONFIG_DVB_LGDT3304 is not set
CONFIG_DVB_S5H1409=m
CONFIG_DVB_AU8522=m
CONFIG_DVB_S5H1411=m

#
# ISDB-T (terrestrial) frontends
#
# CONFIG_DVB_S921 is not set

#
# Digital terrestrial only tuners/PLL
#
CONFIG_DVB_PLL=m
CONFIG_DVB_TUNER_DIB0070=m

#
# SEC control devices for DVB-S
#
CONFIG_DVB_LNBP21=m
CONFIG_DVB_ISL6405=m
CONFIG_DVB_ISL6421=m
# CONFIG_DVB_LGS8GL5 is not set

#
# Tools to develop new frontends
#
# CONFIG_DVB_DUMMY_FE is not set
# CONFIG_DVB_AF9013 is not set
CONFIG_DAB=y
CONFIG_USB_DABUSB=m

#
# Graphics support
#
CONFIG_AGP=y
CONFIG_AGP_AMD64=y
CONFIG_AGP_INTEL=y
# CONFIG_AGP_SIS is not set
# CONFIG_AGP_VIA is not set
CONFIG_DRM=m
# CONFIG_DRM_TDFX is not set
# CONFIG_DRM_R128 is not set
# CONFIG_DRM_RADEON is not set
CONFIG_DRM_I810=m
CONFIG_DRM_I830=m
CONFIG_DRM_I915=m
# CONFIG_DRM_I915_KMS is not set
# CONFIG_DRM_MGA is not set
# CONFIG_DRM_SIS is not set
# CONFIG_DRM_VIA is not set
# CONFIG_DRM_SAVAGE is not set
CONFIG_VGASTATE=m
CONFIG_VIDEO_OUTPUT_CONTROL=m
CONFIG_FB=y
# CONFIG_FIRMWARE_EDID is not set
CONFIG_FB_DDC=m
CONFIG_FB_BOOT_VESA_SUPPORT=y
CONFIG_FB_CFB_FILLRECT=m
CONFIG_FB_CFB_COPYAREA=m
CONFIG_FB_CFB_IMAGEBLIT=m
# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
# CONFIG_FB_SYS_FILLRECT is not set
# CONFIG_FB_SYS_COPYAREA is not set
# CONFIG_FB_SYS_IMAGEBLIT is not set
# CONFIG_FB_FOREIGN_ENDIAN is not set
# CONFIG_FB_SYS_FOPS is not set
# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not set
# CONFIG_FB_BACKLIGHT is not set
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_TILEBLITTING=y

#
# Frame buffer hardware drivers
#
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_ARC is not set
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
CONFIG_FB_VGA16=m
CONFIG_FB_UVESA=m
# CONFIG_FB_VESA is not set
# CONFIG_FB_N411 is not set
# CONFIG_FB_HGA is not set
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_NVIDIA is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_LE80578 is not set
CONFIG_FB_INTEL=m
# CONFIG_FB_INTEL_DEBUG is not set
CONFIG_FB_INTEL_I2C=y
# CONFIG_FB_MATROX is not set
# CONFIG_FB_RADEON is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_S3 is not set
# CONFIG_FB_SAVAGE is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_VIA is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_VT8623 is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_ARK is not set
# CONFIG_FB_PM3 is not set
# CONFIG_FB_CARMINE is not set
# CONFIG_FB_GEODE is not set
# CONFIG_FB_SM501 is not set
# CONFIG_FB_VIRTUAL is not set
# CONFIG_FB_METRONOME is not set
# CONFIG_FB_MB862XX is not set
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_LCD_CLASS_DEVICE=m
# CONFIG_LCD_ILI9320 is not set
CONFIG_LCD_PLATFORM=m
CONFIG_BACKLIGHT_CLASS_DEVICE=y
CONFIG_BACKLIGHT_GENERIC=m
# CONFIG_BACKLIGHT_PROGEAR is not set
# CONFIG_BACKLIGHT_MBP_NVIDIA is not set
# CONFIG_BACKLIGHT_SAHARA is not set

#
# Display device support
#
CONFIG_DISPLAY_SUPPORT=m

#
# Display hardware drivers
#

#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
CONFIG_VGACON_SOFT_SCROLLBACK=y
CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=64
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
CONFIG_LOGO=y
# CONFIG_LOGO_LINUX_MONO is not set
# CONFIG_LOGO_LINUX_VGA16 is not set
# CONFIG_LOGO_LINUX_CLUT224 is not set
CONFIG_SOUND=m
CONFIG_SOUND_OSS_CORE=y
CONFIG_SND=m
CONFIG_SND_TIMER=m
CONFIG_SND_PCM=m
CONFIG_SND_HWDEP=m
CONFIG_SND_RAWMIDI=m
CONFIG_SND_JACK=y
CONFIG_SND_SEQUENCER=m
CONFIG_SND_SEQ_DUMMY=m
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=m
CONFIG_SND_PCM_OSS=m
CONFIG_SND_PCM_OSS_PLUGINS=y
CONFIG_SND_SEQUENCER_OSS=y
CONFIG_SND_HRTIMER=m
CONFIG_SND_SEQ_HRTIMER_DEFAULT=y
CONFIG_SND_DYNAMIC_MINORS=y
# CONFIG_SND_SUPPORT_OLD_API is not set
CONFIG_SND_VERBOSE_PROCFS=y
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
CONFIG_SND_VMASTER=y
CONFIG_SND_MPU401_UART=m
CONFIG_SND_VX_LIB=m
CONFIG_SND_AC97_CODEC=m
CONFIG_SND_DRIVERS=y
CONFIG_SND_PCSP=m
CONFIG_SND_DUMMY=m
CONFIG_SND_VIRMIDI=m
CONFIG_SND_MTS64=m
# CONFIG_SND_SERIAL_U16550 is not set
CONFIG_SND_MPU401=m
CONFIG_SND_PORTMAN2X4=m
CONFIG_SND_AC97_POWER_SAVE=y
CONFIG_SND_AC97_POWER_SAVE_DEFAULT=0
CONFIG_SND_PCI=y
# CONFIG_SND_AD1889 is not set
# CONFIG_SND_ALS300 is not set
# CONFIG_SND_ALS4000 is not set
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_ATIIXP is not set
# CONFIG_SND_ATIIXP_MODEM is not set
# CONFIG_SND_AU8810 is not set
CONFIG_SND_AU8820=m
# CONFIG_SND_AU8830 is not set
# CONFIG_SND_AW2 is not set
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_BT87X is not set
# CONFIG_SND_CA0106 is not set
# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_OXYGEN is not set
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_CS5530 is not set
# CONFIG_SND_DARLA20 is not set
# CONFIG_SND_GINA20 is not set
# CONFIG_SND_LAYLA20 is not set
# CONFIG_SND_DARLA24 is not set
# CONFIG_SND_GINA24 is not set
# CONFIG_SND_LAYLA24 is not set
# CONFIG_SND_MONA is not set
# CONFIG_SND_MIA is not set
# CONFIG_SND_ECHO3G is not set
# CONFIG_SND_INDIGO is not set
# CONFIG_SND_INDIGOIO is not set
# CONFIG_SND_INDIGODJ is not set
# CONFIG_SND_EMU10K1 is not set
# CONFIG_SND_EMU10K1X is not set
# CONFIG_SND_ENS1370 is not set
# CONFIG_SND_ENS1371 is not set
# CONFIG_SND_ES1938 is not set
# CONFIG_SND_ES1968 is not set
# CONFIG_SND_FM801 is not set
CONFIG_SND_HDA_INTEL=m
CONFIG_SND_HDA_HWDEP=y
# CONFIG_SND_HDA_RECONFIG is not set
# CONFIG_SND_HDA_INPUT_BEEP is not set
CONFIG_SND_HDA_CODEC_REALTEK=y
CONFIG_SND_HDA_CODEC_ANALOG=y
CONFIG_SND_HDA_CODEC_SIGMATEL=y
CONFIG_SND_HDA_CODEC_VIA=y
CONFIG_SND_HDA_CODEC_ATIHDMI=y
CONFIG_SND_HDA_CODEC_NVHDMI=y
CONFIG_SND_HDA_CODEC_INTELHDMI=y
CONFIG_SND_HDA_ELD=y
CONFIG_SND_HDA_CODEC_CONEXANT=y
CONFIG_SND_HDA_CODEC_CMEDIA=y
CONFIG_SND_HDA_CODEC_SI3054=y
CONFIG_SND_HDA_GENERIC=y
CONFIG_SND_HDA_POWER_SAVE=y
CONFIG_SND_HDA_POWER_SAVE_DEFAULT=0
# CONFIG_SND_HDSP is not set
# CONFIG_SND_HDSPM is not set
# CONFIG_SND_HIFIER is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
CONFIG_SND_INTEL8X0=m
CONFIG_SND_INTEL8X0M=m
# CONFIG_SND_KORG1212 is not set
# CONFIG_SND_MAESTRO3 is not set
# CONFIG_SND_MIXART is not set
# CONFIG_SND_NM256 is not set
# CONFIG_SND_PCXHR is not set
# CONFIG_SND_RIPTIDE is not set
# CONFIG_SND_RME32 is not set
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
# CONFIG_SND_SONICVIBES is not set
# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_VIA82XX is not set
# CONFIG_SND_VIA82XX_MODEM is not set
# CONFIG_SND_VIRTUOSO is not set
# CONFIG_SND_VX222 is not set
# CONFIG_SND_YMFPCI is not set
CONFIG_SND_USB=y
CONFIG_SND_USB_AUDIO=m
CONFIG_SND_USB_USX2Y=m
CONFIG_SND_USB_CAIAQ=m
CONFIG_SND_USB_CAIAQ_INPUT=y
CONFIG_SND_USB_US122L=m
CONFIG_SND_PCMCIA=y
CONFIG_SND_VXPOCKET=m
CONFIG_SND_PDAUDIOCF=m
CONFIG_SND_SOC=m
CONFIG_SND_SOC_I2C_AND_SPI=m
CONFIG_SND_SOC_ALL_CODECS=m
CONFIG_SND_SOC_AD73311=m
CONFIG_SND_SOC_AK4535=m
CONFIG_SND_SOC_CS4270=m
CONFIG_SND_SOC_L3=m
CONFIG_SND_SOC_PCM3008=m
CONFIG_SND_SOC_SSM2602=m
CONFIG_SND_SOC_TLV320AIC23=m
CONFIG_SND_SOC_TLV320AIC3X=m
CONFIG_SND_SOC_UDA134X=m
CONFIG_SND_SOC_UDA1380=m
CONFIG_SND_SOC_WM8510=m
CONFIG_SND_SOC_WM8580=m
CONFIG_SND_SOC_WM8728=m
CONFIG_SND_SOC_WM8731=m
CONFIG_SND_SOC_WM8750=m
CONFIG_SND_SOC_WM8753=m
CONFIG_SND_SOC_WM8900=m
CONFIG_SND_SOC_WM8903=m
CONFIG_SND_SOC_WM8971=m
CONFIG_SND_SOC_WM8990=m
# CONFIG_SOUND_PRIME is not set
CONFIG_AC97_BUS=m
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
# CONFIG_HID_DEBUG is not set
CONFIG_HIDRAW=y

#
# USB Input Devices
#
CONFIG_USB_HID=y
CONFIG_HID_PID=y
CONFIG_USB_HIDDEV=y

#
# Special HID drivers
#
CONFIG_HID_COMPAT=y
CONFIG_HID_A4TECH=y
CONFIG_HID_APPLE=y
CONFIG_HID_BELKIN=y
CONFIG_HID_CHERRY=y
CONFIG_HID_CHICONY=y
CONFIG_HID_CYPRESS=y
CONFIG_HID_EZKEY=y
CONFIG_HID_GYRATION=y
CONFIG_HID_LOGITECH=y
CONFIG_LOGITECH_FF=y
# CONFIG_LOGIRUMBLEPAD2_FF is not set
CONFIG_HID_MICROSOFT=y
CONFIG_HID_MONTEREY=y
CONFIG_HID_NTRIG=y
CONFIG_HID_PANTHERLORD=y
CONFIG_PANTHERLORD_FF=y
CONFIG_HID_PETALYNX=y
CONFIG_HID_SAMSUNG=y
CONFIG_HID_SONY=y
CONFIG_HID_SUNPLUS=y
# CONFIG_GREENASIA_FF is not set
CONFIG_HID_TOPSEED=y
CONFIG_THRUSTMASTER_FF=y
CONFIG_ZEROPLUS_FF=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=y
# CONFIG_USB_DEBUG is not set
# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set

#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
CONFIG_USB_DEVICE_CLASS=y
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_SUSPEND is not set
# CONFIG_USB_OTG is not set
CONFIG_USB_MON=y
# CONFIG_USB_WUSB is not set
# CONFIG_USB_WUSB_CBAF is not set

#
# USB Host Controller Drivers
#
# CONFIG_USB_C67X00_HCD is not set
CONFIG_USB_EHCI_HCD=m
CONFIG_USB_EHCI_ROOT_HUB_TT=y
CONFIG_USB_EHCI_TT_NEWSCHED=y
# CONFIG_USB_OXU210HP_HCD is not set
CONFIG_USB_ISP116X_HCD=m
# CONFIG_USB_ISP1760_HCD is not set
CONFIG_USB_OHCI_HCD=m
# CONFIG_USB_OHCI_HCD_SSB is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_UHCI_HCD=m
CONFIG_USB_U132_HCD=m
CONFIG_USB_SL811_HCD=m
CONFIG_USB_SL811_CS=m
CONFIG_USB_R8A66597_HCD=m
# CONFIG_USB_HWA_HCD is not set

#
# USB Device Class drivers
#
CONFIG_USB_ACM=m
CONFIG_USB_PRINTER=m
CONFIG_USB_WDM=m
# CONFIG_USB_TMC is not set

#
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
#

#
# see USB_STORAGE Help for more information
#
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
CONFIG_USB_STORAGE_DATAFAB=y
CONFIG_USB_STORAGE_FREECOM=y
CONFIG_USB_STORAGE_ISD200=y
CONFIG_USB_STORAGE_USBAT=y
CONFIG_USB_STORAGE_SDDR09=y
CONFIG_USB_STORAGE_SDDR55=y
CONFIG_USB_STORAGE_JUMPSHOT=y
CONFIG_USB_STORAGE_ALAUDA=y
# CONFIG_USB_STORAGE_ONETOUCH is not set
CONFIG_USB_STORAGE_KARMA=y
# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
CONFIG_USB_LIBUSUAL=y

#
# USB Imaging devices
#
CONFIG_USB_MDC800=m
CONFIG_USB_MICROTEK=m

#
# USB port drivers
#
CONFIG_USB_USS720=m
CONFIG_USB_SERIAL=m
CONFIG_USB_EZUSB=y
CONFIG_USB_SERIAL_GENERIC=y
CONFIG_USB_SERIAL_AIRCABLE=m
CONFIG_USB_SERIAL_ARK3116=m
CONFIG_USB_SERIAL_BELKIN=m
# CONFIG_USB_SERIAL_CH341 is not set
CONFIG_USB_SERIAL_WHITEHEAT=m
CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
CONFIG_USB_SERIAL_CP2101=m
CONFIG_USB_SERIAL_CYPRESS_M8=m
CONFIG_USB_SERIAL_EMPEG=m
CONFIG_USB_SERIAL_FTDI_SIO=m
CONFIG_USB_SERIAL_FUNSOFT=m
CONFIG_USB_SERIAL_VISOR=m
CONFIG_USB_SERIAL_IPAQ=m
CONFIG_USB_SERIAL_IR=m
CONFIG_USB_SERIAL_EDGEPORT=m
CONFIG_USB_SERIAL_EDGEPORT_TI=m
CONFIG_USB_SERIAL_GARMIN=m
CONFIG_USB_SERIAL_IPW=m
# CONFIG_USB_SERIAL_IUU is not set
CONFIG_USB_SERIAL_KEYSPAN_PDA=m
CONFIG_USB_SERIAL_KEYSPAN=m
CONFIG_USB_SERIAL_KEYSPAN_MPR=y
CONFIG_USB_SERIAL_KEYSPAN_USA28=y
CONFIG_USB_SERIAL_KEYSPAN_USA28X=y
CONFIG_USB_SERIAL_KEYSPAN_USA28XA=y
CONFIG_USB_SERIAL_KEYSPAN_USA28XB=y
CONFIG_USB_SERIAL_KEYSPAN_USA19=y
CONFIG_USB_SERIAL_KEYSPAN_USA18X=y
CONFIG_USB_SERIAL_KEYSPAN_USA19W=y
CONFIG_USB_SERIAL_KEYSPAN_USA19QW=y
CONFIG_USB_SERIAL_KEYSPAN_USA19QI=y
CONFIG_USB_SERIAL_KEYSPAN_USA49W=y
CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y
CONFIG_USB_SERIAL_KLSI=m
CONFIG_USB_SERIAL_KOBIL_SCT=m
CONFIG_USB_SERIAL_MCT_U232=m
CONFIG_USB_SERIAL_MOS7720=m
CONFIG_USB_SERIAL_MOS7840=m
CONFIG_USB_SERIAL_MOTOROLA=m
CONFIG_USB_SERIAL_NAVMAN=m
CONFIG_USB_SERIAL_PL2303=m
CONFIG_USB_SERIAL_OTI6858=m
CONFIG_USB_SERIAL_SPCP8X5=m
CONFIG_USB_SERIAL_HP4X=m
CONFIG_USB_SERIAL_SAFE=m
CONFIG_USB_SERIAL_SAFE_PADDED=y
# CONFIG_USB_SERIAL_SIEMENS_MPI is not set
CONFIG_USB_SERIAL_SIERRAWIRELESS=m
CONFIG_USB_SERIAL_TI=m
CONFIG_USB_SERIAL_CYBERJACK=m
CONFIG_USB_SERIAL_XIRCOM=m
CONFIG_USB_SERIAL_OPTION=m
CONFIG_USB_SERIAL_OMNINET=m
# CONFIG_USB_SERIAL_OPTICON is not set
CONFIG_USB_SERIAL_DEBUG=m

#
# USB Miscellaneous drivers
#
CONFIG_USB_EMI62=m
CONFIG_USB_EMI26=m
CONFIG_USB_ADUTUX=m
# CONFIG_USB_SEVSEG is not set
CONFIG_USB_RIO500=m
CONFIG_USB_LEGOTOWER=m
CONFIG_USB_LCD=m
CONFIG_USB_BERRY_CHARGE=m
CONFIG_USB_LED=m
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
CONFIG_USB_PHIDGET=m
CONFIG_USB_PHIDGETKIT=m
CONFIG_USB_PHIDGETMOTORCONTROL=m
CONFIG_USB_PHIDGETSERVO=m
CONFIG_USB_IDMOUSE=m
CONFIG_USB_FTDI_ELAN=m
CONFIG_USB_APPLEDISPLAY=m
CONFIG_USB_SISUSBVGA=m
CONFIG_USB_SISUSBVGA_CON=y
CONFIG_USB_LD=m
CONFIG_USB_TRANCEVIBRATOR=m
CONFIG_USB_IOWARRIOR=m
CONFIG_USB_TEST=m
CONFIG_USB_ISIGHTFW=m
# CONFIG_USB_VST is not set
CONFIG_USB_ATM=m
CONFIG_USB_SPEEDTOUCH=m
CONFIG_USB_CXACRU=m
CONFIG_USB_UEAGLEATM=m
CONFIG_USB_XUSBATM=m

#
# OTG and related infrastructure
#
# CONFIG_UWB is not set
CONFIG_MMC=m
# CONFIG_MMC_DEBUG is not set
# CONFIG_MMC_UNSAFE_RESUME is not set

#
# MMC/SD/SDIO Card Drivers
#
CONFIG_MMC_BLOCK=m
CONFIG_MMC_BLOCK_BOUNCE=y
CONFIG_SDIO_UART=m
CONFIG_MMC_TEST=m

#
# MMC/SD/SDIO Host Controller Drivers
#
CONFIG_MMC_SDHCI=m
# CONFIG_MMC_SDHCI_PCI is not set
CONFIG_MMC_WBSD=m
CONFIG_MMC_TIFM_SD=m
# CONFIG_MMC_SDRICOH_CS is not set
# CONFIG_MEMSTICK is not set
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y

#
# LED drivers
#
# CONFIG_LEDS_ALIX2 is not set
# CONFIG_LEDS_PCA9532 is not set
# CONFIG_LEDS_CLEVO_MAIL is not set
# CONFIG_LEDS_PCA955X is not set

#
# LED Triggers
#
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=m
CONFIG_LEDS_TRIGGER_HEARTBEAT=m
CONFIG_LEDS_TRIGGER_BACKLIGHT=m
CONFIG_LEDS_TRIGGER_DEFAULT_ON=m
# CONFIG_ACCESSIBILITY is not set
CONFIG_EDAC=y

#
# Reporting subsystems
#
# CONFIG_EDAC_DEBUG is not set
CONFIG_EDAC_MM_EDAC=m
CONFIG_EDAC_E752X=m
CONFIG_EDAC_I82975X=m
# CONFIG_EDAC_I3000 is not set
CONFIG_EDAC_X38=m
CONFIG_EDAC_I5400=m
CONFIG_EDAC_I5000=m
# CONFIG_EDAC_I5100 is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
CONFIG_RTC_DEBUG=y

#
# RTC interfaces
#
CONFIG_RTC_INTF_SYSFS=y
CONFIG_RTC_INTF_PROC=y
CONFIG_RTC_INTF_DEV=y
# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
# CONFIG_RTC_DRV_TEST is not set

#
# I2C RTC drivers
#
# CONFIG_RTC_DRV_DS1307 is not set
# CONFIG_RTC_DRV_DS1374 is not set
# CONFIG_RTC_DRV_DS1672 is not set
# CONFIG_RTC_DRV_MAX6900 is not set
# CONFIG_RTC_DRV_RS5C372 is not set
# CONFIG_RTC_DRV_ISL1208 is not set
# CONFIG_RTC_DRV_X1205 is not set
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8581 is not set

#
# SPI RTC drivers
#

#
# Platform RTC drivers
#
CONFIG_RTC_DRV_CMOS=y
# CONFIG_RTC_DRV_DS1286 is not set
# CONFIG_RTC_DRV_DS1511 is not set
# CONFIG_RTC_DRV_DS1553 is not set
# CONFIG_RTC_DRV_DS1742 is not set
# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
# CONFIG_RTC_DRV_BQ4802 is not set
# CONFIG_RTC_DRV_V3020 is not set

#
# on-CPU RTC drivers
#
CONFIG_DMADEVICES=y

#
# DMA Devices
#
CONFIG_INTEL_IOATDMA=m
CONFIG_DMA_ENGINE=y

#
# DMA Clients
#
CONFIG_NET_DMA=y
# CONFIG_DMATEST is not set
CONFIG_DCA=m
# CONFIG_AUXDISPLAY is not set
CONFIG_UIO=m
CONFIG_UIO_CIF=m
# CONFIG_UIO_PDRV is not set
# CONFIG_UIO_PDRV_GENIRQ is not set
CONFIG_UIO_SMX=m
# CONFIG_UIO_SERCOS3 is not set
CONFIG_STAGING=y
CONFIG_STAGING_EXCLUDE_BUILD=y
CONFIG_X86_PLATFORM_DEVICES=y
# CONFIG_ACER_WMI is not set
# CONFIG_ASUS_LAPTOP is not set
# CONFIG_FUJITSU_LAPTOP is not set
# CONFIG_HP_WMI is not set
# CONFIG_MSI_LAPTOP is not set
# CONFIG_PANASONIC_LAPTOP is not set
# CONFIG_COMPAL_LAPTOP is not set
# CONFIG_SONY_LAPTOP is not set
CONFIG_THINKPAD_ACPI=m
# CONFIG_THINKPAD_ACPI_DEBUGFACILITIES is not set
# CONFIG_THINKPAD_ACPI_DEBUG is not set
CONFIG_THINKPAD_ACPI_BAY=y
CONFIG_THINKPAD_ACPI_VIDEO=y
CONFIG_THINKPAD_ACPI_HOTKEY_POLL=y
# CONFIG_INTEL_MENLOW is not set
CONFIG_ACPI_WMI=m
# CONFIG_ACPI_ASUS is not set
# CONFIG_ACPI_TOSHIBA is not set

#
# Firmware Drivers
#
CONFIG_EDD=m
# CONFIG_EDD_OFF is not set
CONFIG_FIRMWARE_MEMMAP=y
# CONFIG_DELL_RBU is not set
# CONFIG_DCDBAS is not set
CONFIG_DMIID=y
# CONFIG_ISCSI_IBFT_FIND is not set

#
# File systems
#
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
CONFIG_EXT2_FS_SECURITY=y
CONFIG_EXT2_FS_XIP=y
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
# CONFIG_EXT4_FS is not set
CONFIG_FS_XIP=y
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
CONFIG_GFS2_FS=m
CONFIG_GFS2_FS_LOCKING_DLM=m
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_QUOTA=y
CONFIG_QUOTA_NETLINK_INTERFACE=y
CONFIG_PRINT_QUOTA_WARNING=y
CONFIG_QUOTA_TREE=y
# CONFIG_QFMT_V1 is not set
CONFIG_QFMT_V2=y
CONFIG_QUOTACTL=y
# CONFIG_AUTOFS_FS is not set
CONFIG_AUTOFS4_FS=m
CONFIG_FUSE_FS=m
CONFIG_GENERIC_ACL=y

#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_UDF_FS=m
CONFIG_UDF_NLS=y

#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="ascii"
# CONFIG_NTFS_FS is not set

#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_VMCORE=y
CONFIG_PROC_SYSCTL=y
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
CONFIG_CONFIGFS_FS=m
CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
CONFIG_ECRYPT_FS=m
CONFIG_HFS_FS=m
CONFIG_HFSPLUS_FS=m
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_UBIFS_FS is not set
CONFIG_CRAMFS=m
CONFIG_SQUASHFS=m
# CONFIG_SQUASHFS_EMBEDDED is not set
CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
CONFIG_VXFS_FS=m
# CONFIG_MINIX_FS is not set
CONFIG_OMFS_FS=m
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
CONFIG_ROMFS_FS=m
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=m
CONFIG_NFS_V3=y
CONFIG_NFS_V3_ACL=y
CONFIG_NFS_V4=y
CONFIG_NFSD=m
CONFIG_NFSD_V2_ACL=y
CONFIG_NFSD_V3=y
CONFIG_NFSD_V3_ACL=y
CONFIG_NFSD_V4=y
CONFIG_LOCKD=m
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=m
CONFIG_NFS_ACL_SUPPORT=m
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=m
CONFIG_SUNRPC_GSS=m
# CONFIG_SUNRPC_REGISTER_V4 is not set
CONFIG_RPCSEC_GSS_KRB5=m
CONFIG_RPCSEC_GSS_SPKM3=m
# CONFIG_SMB_FS is not set
CONFIG_CIFS=m
# CONFIG_CIFS_STATS is not set
CONFIG_CIFS_WEAK_PW_HASH=y
# CONFIG_CIFS_UPCALL is not set
CONFIG_CIFS_XATTR=y
CONFIG_CIFS_POSIX=y
# CONFIG_CIFS_DEBUG2 is not set
# CONFIG_CIFS_EXPERIMENTAL is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set

#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
CONFIG_OSF_PARTITION=y
CONFIG_AMIGA_PARTITION=y
# CONFIG_ATARI_PARTITION is not set
CONFIG_MAC_PARTITION=y
CONFIG_MSDOS_PARTITION=y
CONFIG_BSD_DISKLABEL=y
CONFIG_MINIX_SUBPARTITION=y
CONFIG_SOLARIS_X86_PARTITION=y
CONFIG_UNIXWARE_DISKLABEL=y
# CONFIG_LDM_PARTITION is not set
CONFIG_SGI_PARTITION=y
# CONFIG_ULTRIX_PARTITION is not set
CONFIG_SUN_PARTITION=y
CONFIG_KARMA_PARTITION=y
CONFIG_EFI_PARTITION=y
# CONFIG_SYSV68_PARTITION is not set
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="utf8"
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_CODEPAGE_737=m
CONFIG_NLS_CODEPAGE_775=m
CONFIG_NLS_CODEPAGE_850=m
CONFIG_NLS_CODEPAGE_852=m
CONFIG_NLS_CODEPAGE_855=m
CONFIG_NLS_CODEPAGE_857=m
CONFIG_NLS_CODEPAGE_860=m
CONFIG_NLS_CODEPAGE_861=m
CONFIG_NLS_CODEPAGE_862=m
CONFIG_NLS_CODEPAGE_863=m
CONFIG_NLS_CODEPAGE_864=m
CONFIG_NLS_CODEPAGE_865=m
CONFIG_NLS_CODEPAGE_866=m
CONFIG_NLS_CODEPAGE_869=m
CONFIG_NLS_CODEPAGE_936=m
CONFIG_NLS_CODEPAGE_950=m
CONFIG_NLS_CODEPAGE_932=m
CONFIG_NLS_CODEPAGE_949=m
CONFIG_NLS_CODEPAGE_874=m
CONFIG_NLS_ISO8859_8=m
CONFIG_NLS_CODEPAGE_1250=m
CONFIG_NLS_CODEPAGE_1251=m
CONFIG_NLS_ASCII=y
CONFIG_NLS_ISO8859_1=m
CONFIG_NLS_ISO8859_2=m
CONFIG_NLS_ISO8859_3=m
CONFIG_NLS_ISO8859_4=m
CONFIG_NLS_ISO8859_5=m
CONFIG_NLS_ISO8859_6=m
CONFIG_NLS_ISO8859_7=m
CONFIG_NLS_ISO8859_9=m
CONFIG_NLS_ISO8859_13=m
CONFIG_NLS_ISO8859_14=m
CONFIG_NLS_ISO8859_15=m
CONFIG_NLS_KOI8_R=m
CONFIG_NLS_KOI8_U=m
CONFIG_NLS_UTF8=m
CONFIG_DLM=m
CONFIG_DLM_DEBUG=y

#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
# CONFIG_PRINTK_TIME is not set
CONFIG_ALLOW_WARNINGS=y
CONFIG_ENABLE_WARN_DEPRECATED=y
# CONFIG_ENABLE_MUST_CHECK is not set
CONFIG_FRAME_WARN=2048
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
CONFIG_HEADERS_CHECK=y
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
CONFIG_DETECT_HUNG_TASK=y
# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
CONFIG_SCHED_DEBUG=y
CONFIG_SCHEDSTATS=y
CONFIG_TIMER_STATS=y
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_DEBUG_SLAB is not set
# CONFIG_DEBUG_PREEMPT is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_LOCK_ALLOC is not set
# CONFIG_PROVE_LOCKING is not set
# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
CONFIG_STACKTRACE=y
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_VIRTUAL is not set
# CONFIG_DEBUG_WRITECOUNT is not set
CONFIG_DEBUG_MEMORY_INIT=y
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
CONFIG_ARCH_WANT_FRAME_POINTERS=y
CONFIG_FRAME_POINTER=y
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_KPROBES_SANITY_TEST is not set
CONFIG_BACKTRACE_SELF_TEST=m
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_LKDTM is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_USER_STACKTRACE_SUPPORT=y
CONFIG_NOP_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_HW_BRANCH_TRACER=y
CONFIG_RING_BUFFER=y
CONFIG_TRACING=y

#
# Tracers
#
# CONFIG_FUNCTION_TRACER is not set
# CONFIG_IRQSOFF_TRACER is not set
# CONFIG_PREEMPT_TRACER is not set
# CONFIG_SYSPROF_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
# CONFIG_BOOT_TRACER is not set
# CONFIG_TRACE_BRANCH_PROFILING is not set
# CONFIG_POWER_TRACER is not set
# CONFIG_STACK_TRACER is not set
# CONFIG_HW_BRANCH_TRACER is not set
# CONFIG_KMEMTRACE is not set
CONFIG_BLK_DEV_IO_TRACE=y
# CONFIG_FTRACE_STARTUP_TEST is not set
# CONFIG_MMIOTRACE is not set
# CONFIG_PROVIDE_OHCI1394_DMA_INIT is not set
# CONFIG_FIREWIRE_OHCI_REMOTE_DMA is not set
# CONFIG_BUILD_DOCSRC is not set
# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
CONFIG_SAMPLES=y
CONFIG_SAMPLE_MARKERS=m
# CONFIG_SAMPLE_TRACEPOINTS is not set
CONFIG_SAMPLE_KOBJECT=m
CONFIG_SAMPLE_KPROBES=m
CONFIG_SAMPLE_KRETPROBES=m
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
# CONFIG_STRICT_DEVMEM is not set
CONFIG_X86_VERBOSE_BOOTUP=y
CONFIG_EARLY_PRINTK=y
# CONFIG_EARLY_PRINTK_DBGP is not set
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_DEBUG_PER_CPU_MAPS is not set
# CONFIG_X86_PTDUMP is not set
CONFIG_DEBUG_RODATA=y
# CONFIG_DEBUG_RODATA_TEST is not set
CONFIG_DEBUG_NX_TEST=m
# CONFIG_IOMMU_DEBUG is not set
CONFIG_HAVE_MMIOTRACE_SUPPORT=y
CONFIG_IO_DELAY_TYPE_0X80=0
CONFIG_IO_DELAY_TYPE_0XED=1
CONFIG_IO_DELAY_TYPE_UDELAY=2
CONFIG_IO_DELAY_TYPE_NONE=3
CONFIG_IO_DELAY_0X80=y
# CONFIG_IO_DELAY_0XED is not set
# CONFIG_IO_DELAY_UDELAY is not set
# CONFIG_IO_DELAY_NONE is not set
CONFIG_DEFAULT_IO_DELAY_TYPE=0
# CONFIG_DEBUG_BOOT_PARAMS is not set
# CONFIG_CPA_DEBUG is not set
# CONFIG_OPTIMIZE_INLINING is not set

#
# Security options
#
CONFIG_KEYS=y
CONFIG_KEYS_DEBUG_PROC_KEYS=y
CONFIG_SECURITY=y
# CONFIG_SECURITYFS is not set
CONFIG_SECURITY_NETWORK=y
# CONFIG_SECURITY_NETWORK_XFRM is not set
# CONFIG_SECURITY_PATH is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
# CONFIG_SECURITY_ROOTPLUG is not set
CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=0
CONFIG_SECURITY_SELINUX=y
CONFIG_SECURITY_SELINUX_BOOTPARAM=y
CONFIG_SECURITY_SELINUX_BOOTPARAM_VALUE=1
CONFIG_SECURITY_SELINUX_DISABLE=y
CONFIG_SECURITY_SELINUX_DEVELOP=y
CONFIG_SECURITY_SELINUX_AVC_STATS=y
CONFIG_SECURITY_SELINUX_CHECKREQPROT_VALUE=1
# CONFIG_SECURITY_SELINUX_POLICYDB_VERSION_MAX is not set
# CONFIG_SECURITY_SMACK is not set
CONFIG_XOR_BLOCKS=m
CONFIG_ASYNC_CORE=m
CONFIG_ASYNC_MEMCPY=m
CONFIG_ASYNC_XOR=m
CONFIG_CRYPTO=y

#
# Crypto core or helper
#
CONFIG_CRYPTO_FIPS=y
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=m
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG=m
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
CONFIG_CRYPTO_GF128MUL=m
CONFIG_CRYPTO_NULL=m
CONFIG_CRYPTO_CRYPTD=m
CONFIG_CRYPTO_AUTHENC=m
# CONFIG_CRYPTO_TEST is not set

#
# Authenticated Encryption with Associated Data
#
CONFIG_CRYPTO_CCM=m
CONFIG_CRYPTO_GCM=m
CONFIG_CRYPTO_SEQIV=m

#
# Block modes
#
CONFIG_CRYPTO_CBC=m
CONFIG_CRYPTO_CTR=m
CONFIG_CRYPTO_CTS=m
CONFIG_CRYPTO_ECB=y
CONFIG_CRYPTO_LRW=m
CONFIG_CRYPTO_PCBC=m
CONFIG_CRYPTO_XTS=m

#
# Hash modes
#
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_XCBC=m

#
# Digest
#
CONFIG_CRYPTO_CRC32C=y
# CONFIG_CRYPTO_CRC32C_INTEL is not set
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_RMD128=m
CONFIG_CRYPTO_RMD160=m
CONFIG_CRYPTO_RMD256=m
CONFIG_CRYPTO_RMD320=m
CONFIG_CRYPTO_SHA1=y
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_TGR192=m
CONFIG_CRYPTO_WP512=m

#
# Ciphers
#
CONFIG_CRYPTO_AES=y
CONFIG_CRYPTO_AES_X86_64=m
CONFIG_CRYPTO_ANUBIS=m
CONFIG_CRYPTO_ARC4=y
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_CAMELLIA=m
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST6=m
CONFIG_CRYPTO_DES=m
CONFIG_CRYPTO_FCRYPT=m
CONFIG_CRYPTO_KHAZAD=m
CONFIG_CRYPTO_SALSA20=m
CONFIG_CRYPTO_SALSA20_X86_64=m
CONFIG_CRYPTO_SEED=m
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_TEA=m
CONFIG_CRYPTO_TWOFISH=m
CONFIG_CRYPTO_TWOFISH_COMMON=m
CONFIG_CRYPTO_TWOFISH_X86_64=m

#
# Compression
#
CONFIG_CRYPTO_DEFLATE=m
CONFIG_CRYPTO_LZO=m

#
# Random Number Generation
#
CONFIG_CRYPTO_ANSI_CPRNG=m
CONFIG_CRYPTO_HW=y
CONFIG_CRYPTO_DEV_HIFN_795X=m
# CONFIG_CRYPTO_DEV_HIFN_795X_RNG is not set
CONFIG_HAVE_KVM=y
# CONFIG_VIRTUALIZATION is not set

#
# Library routines
#
CONFIG_BITREVERSE=y
CONFIG_GENERIC_FIND_FIRST_BIT=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_FIND_LAST_BIT=y
CONFIG_CRC_CCITT=m
CONFIG_CRC16=m
CONFIG_CRC_T10DIF=y
CONFIG_CRC_ITU_T=m
CONFIG_CRC32=y
CONFIG_CRC7=m
CONFIG_LIBCRC32C=y
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=m
CONFIG_LZO_COMPRESS=m
CONFIG_LZO_DECOMPRESS=m
CONFIG_REED_SOLOMON=m
CONFIG_REED_SOLOMON_DEC16=y
CONFIG_TEXTSEARCH=y
CONFIG_TEXTSEARCH_KMP=m
CONFIG_TEXTSEARCH_BM=m
CONFIG_TEXTSEARCH_FSM=m
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y

^ permalink raw reply	[flat|nested] 359+ messages in thread

* Re: [Announce] 2.6.29-rc4-rt1
  2009-02-12  2:12   ` Frederic Weisbecker
@ 2009-02-12  8:18     ` Ingo Molnar
  2009-02-12  8:19       ` [patch] rt: fix ipi kfree(), introduce IPI_SOFTIRQ Ingo Molnar
  2009-02-12 10:50       ` [patch] sched: cpu hotplug fix Ingo Molnar
  2009-02-12 10:16     ` [patch] rt: res_counter fix Ingo Molnar
  1 sibling, 2 replies; 359+ messages in thread
From: Ingo Molnar @ 2009-02-12  8:18 UTC (permalink / raw)
  To: Frederic Weisbecker
  Cc: Thomas Gleixner, LKML, rt-users, Steven Rostedt, Peter Zijlstra,
	Carsten Emde, Clark Williams


* Frederic Weisbecker <fweisbec@gmail.com> wrote:

> The first one, a lockdep warning:
> 
> [    2.975320]  [<ffffffff8077c7f5>] rt_spin_lock+0x85/0xb0
> [    2.975320]  [<ffffffff802f6823>] ? kfree+0x43/0xc0
> [    2.975320]  [<ffffffff802f6823>] kfree+0x43/0xc0
> [    2.975320]  [<ffffffff8027f2fd>] ? trace_hardirqs_off+0xd/0x10
> [    2.975320]  [<ffffffff8028a156>] generic_smp_call_function_single_interrupt+0x106/0x110
> [    2.975320]  [<ffffffff80227144>] smp_call_function_single_interrupt+0x24/0x40
> [    2.975320]  [<ffffffff80213223>] call_function_single_interrupt+0x13/0x20
> [    2.975320]  <EOI>  [<ffffffff8022df7b>] ? native_safe_halt+0xb/0x10
> [    2.975320]  [<ffffffff8022df79>] ? native_safe_halt+0x9/0x10
> [    2.975320]  [<ffffffff8021a93a>] ? default_idle+0x5a/0x60
> [    2.975320]  [<ffffffff8021136e>] ? cpu_idle+0x7e/0x100
> [    2.975320]  [<ffffffff80775b6c>] ? start_secondary+0x197/0x1eb

hm, that's a complex one - we do kfree() from IPI context, dunno why this
never triggered in our testing of -rt1.

> The second, a sysfs warning:
> 
> [    8.042459] ------------[ cut here ]------------
> [    8.054763] WARNING: at fs/sysfs/dir.c:462 sysfs_add_one+0x51/0x60()
> [    8.066777] Hardware name: AMILO Li 2727                  
> [    8.078555] sysfs: duplicate filename '14:4' can not be created

that should be harmless - unless you only get it under -rt1.

	Ingo

^ permalink raw reply	[flat|nested] 359+ messages in thread

* [patch] rt: fix ipi kfree(), introduce IPI_SOFTIRQ
  2009-02-12  8:18     ` Ingo Molnar
@ 2009-02-12  8:19       ` Ingo Molnar
  2009-02-12  8:22         ` Ingo Molnar
                           ` (2 more replies)
  2009-02-12 10:50       ` [patch] sched: cpu hotplug fix Ingo Molnar
  1 sibling, 3 replies; 359+ messages in thread
From: Ingo Molnar @ 2009-02-12  8:19 UTC (permalink / raw)
  To: Frederic Weisbecker
  Cc: Thomas Gleixner, LKML, rt-users, Steven Rostedt, Peter Zijlstra,
	Carsten Emde, Clark Williams


* Ingo Molnar <mingo@elte.hu> wrote:

> hm, that's a complex one - we do kfree() from IPI context, [...]

The patch below might do the trick - it offloads this to a softirq.
Not tested yet.

	Ingo

------------------>
Subject: rt: fix ipi kfree(), introduce IPI_SOFTIRQ
From: Ingo Molnar <mingo@elte.hu>
Date: Thu Feb 12 09:06:11 CET 2009

in 2.6.28 generic_smp_call_function_interrupt() grew a kfree(),
which is a rather complex, sleepable method under -rt. But the
IPI code runs as a hardirq - which cannot run such code.

So defer this work to a softirq context instead. It still stays
on the same CPU so the percpu IPI assumptions are upheld.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 include/linux/interrupt.h |    1 +
 include/linux/smp.h       |    3 +++
 init/main.c               |    1 +
 kernel/smp.c              |   15 +++++++++++++--
 4 files changed, 18 insertions(+), 2 deletions(-)

Index: tip/include/linux/interrupt.h
===================================================================
--- tip.orig/include/linux/interrupt.h
+++ tip/include/linux/interrupt.h
@@ -257,6 +257,7 @@ enum
 	SCHED_SOFTIRQ,
 	HRTIMER_SOFTIRQ,
 	RCU_SOFTIRQ,	/* Preferable RCU should always be the last softirq */
+	IPI_SOFTIRQ,
 	/* Entries after this are ignored in split softirq mode */
 	MAX_SOFTIRQ,
 
Index: tip/include/linux/smp.h
===================================================================
--- tip.orig/include/linux/smp.h
+++ tip/include/linux/smp.h
@@ -104,6 +104,9 @@ void ipi_call_lock(void);
 void ipi_call_unlock(void);
 void ipi_call_lock_irq(void);
 void ipi_call_unlock_irq(void);
+void ipi_init(void);
+#else
+static inline void ipi_init(void) { }
 #endif
 
 /*
Index: tip/init/main.c
===================================================================
--- tip.orig/init/main.c
+++ tip/init/main.c
@@ -606,6 +606,7 @@ asmlinkage void __init start_kernel(void
 	/* init some links before init_ISA_irqs() */
 	early_irq_init();
 	init_IRQ();
+	ipi_init();
 	pidhash_init();
 	init_timers();
 	hrtimers_init();
Index: tip/kernel/smp.c
===================================================================
--- tip.orig/kernel/smp.c
+++ tip/kernel/smp.c
@@ -4,12 +4,13 @@
  * (C) Jens Axboe <jens.axboe@oracle.com> 2008
  *
  */
+#include <linux/smp.h>
 #include <linux/init.h>
 #include <linux/module.h>
 #include <linux/percpu.h>
-#include <linux/rcupdate.h>
 #include <linux/rculist.h>
-#include <linux/smp.h>
+#include <linux/rcupdate.h>
+#include <linux/interrupt.h>
 
 static DEFINE_PER_CPU(struct call_single_queue, call_single_queue);
 static LIST_HEAD(call_function_queue);
@@ -152,6 +153,11 @@ void generic_smp_call_function_interrupt
  */
 void generic_smp_call_function_single_interrupt(void)
 {
+	raise_softirq_irqoff(IPI_SOFTIRQ);
+}
+
+static void run_generic_smp_call_function_single(struct softirq_action *h)
+{
 	struct call_single_queue *q = &__get_cpu_var(call_single_queue);
 	LIST_HEAD(list);
 
@@ -430,3 +436,8 @@ void ipi_call_unlock_irq(void)
 {
 	spin_unlock_irq(&call_function_lock);
 }
+
+void __init ipi_init(void)
+{
+	open_softirq(IPI_SOFTIRQ, run_generic_smp_call_function_single);
+}

^ permalink raw reply	[flat|nested] 359+ messages in thread

* Re: [patch] rt: fix ipi kfree(), introduce IPI_SOFTIRQ
  2009-02-12  8:19       ` [patch] rt: fix ipi kfree(), introduce IPI_SOFTIRQ Ingo Molnar
@ 2009-02-12  8:22         ` Ingo Molnar
  2009-02-12  8:27         ` Ingo Molnar
  2009-02-12  9:22         ` Peter Zijlstra
  2 siblings, 0 replies; 359+ messages in thread
From: Ingo Molnar @ 2009-02-12  8:22 UTC (permalink / raw)
  To: Frederic Weisbecker, Peter Zijlstra
  Cc: Thomas Gleixner, LKML, rt-users, Steven Rostedt, Peter Zijlstra,
	Carsten Emde, Clark Williams


* Ingo Molnar <mingo@elte.hu> wrote:

> ------------------>
> Subject: rt: fix ipi kfree(), introduce IPI_SOFTIRQ
> From: Ingo Molnar <mingo@elte.hu>
> Date: Thu Feb 12 09:06:11 CET 2009
> 
> in 2.6.28 generic_smp_call_function_interrupt() grew a kfree(),
> which is a rather complex, sleepable method under -rt. But the
> IPI code runs as a hardirq - which cannot run such code.
> 
> So defer this work to a softirq context instead. It still stays
> on the same CPU so the percpu IPI assumptions are upheld.

On a second thought ...

I think we could eliminate the kfree() instead, and keep the
atomicity of IPI cross-calls. Linus expressed doubts about
the IPI kmalloc()/kfree() pair we do in the generic SMP IPI
code, suggesting that it probably does not help performance
all that much - so such a change might be upstream-able as well
and would keep -rt closer to mainline.

	Ingo

^ permalink raw reply	[flat|nested] 359+ messages in thread

* Re: [patch] rt: fix ipi kfree(), introduce IPI_SOFTIRQ
  2009-02-12  8:19       ` [patch] rt: fix ipi kfree(), introduce IPI_SOFTIRQ Ingo Molnar
  2009-02-12  8:22         ` Ingo Molnar
@ 2009-02-12  8:27         ` Ingo Molnar
  2009-02-12  9:22         ` Peter Zijlstra
  2 siblings, 0 replies; 359+ messages in thread
From: Ingo Molnar @ 2009-02-12  8:27 UTC (permalink / raw)
  To: Frederic Weisbecker
  Cc: Thomas Gleixner, LKML, rt-users, Steven Rostedt, Peter Zijlstra,
	Carsten Emde, Clark Williams


* Ingo Molnar <mingo@elte.hu> wrote:

> * Ingo Molnar <mingo@elte.hu> wrote:
> 
> > hm, that's a complex one - we do kfree() from IPI context, [...]
> 
> The patch below might do the trick - it offloads this to a softirq.
> Not tested yet.

ok, it's lightly tested now: it built and booted up fine to X with your config.

	Ingo

^ permalink raw reply	[flat|nested] 359+ messages in thread

* [patch] irq threading: fix PF_HARDIRQ definition
  2009-02-12  2:55 ` [Announce] 2.6.29-rc4-rt1 Clark Williams
@ 2009-02-12  8:38   ` Ingo Molnar
  2009-02-12  8:42     ` Ingo Molnar
  0 siblings, 1 reply; 359+ messages in thread
From: Ingo Molnar @ 2009-02-12  8:38 UTC (permalink / raw)
  To: Clark Williams
  Cc: Thomas Gleixner, LKML, rt-users, Steven Rostedt, Peter Zijlstra,
	Carsten Emde


* Clark Williams <williams@redhat.com> wrote:

> -----BEGIN PGP SIGNED MESSAGE-----
> Hash: SHA1
> 
> On Wed, 11 Feb 2009 23:43:44 +0100 (CET)
> Thomas Gleixner <tglx@tglx.de> wrote:
> 
> > After a 1.5 years sabbatical from preempt-rt we are pleased to
> > announce a refactored preempt-rt patch against linux-2.6.29-rc4.
> 
> 
> Hi Thomas, 
> 
> I got the following after booting on my T60:
> 
> - ------------[ cut here ]------------
> WARNING: at crypto/blkcipher.c:327 blkcipher_walk_first+0x72/0x1aa()
> Hardware name:
> Modules linked in: fuse i915 drm i2c_algo_bit cfbcopyarea cfbimgblt cfbfillrect autofs4 coretemp sunrpc nf_conntrack_netbios_ns xt_state ipt_REJECT iptable_filter ip_tables cpufreq_ondemand dm_multipath scsi_dh uinput btusb bluetooth sg snd_hda_codec_analog snd_hda_intel snd_hda_codec iwl3945 snd_hwdep e1000e lib80211 snd_seq_dummy snd_seq_oss snd_seq_midi_event snd_seq snd_seq_device snd_pcm_oss video snd_mixer_oss snd_pcm snd_timer snd soundcore snd_page_alloc i2c_i801 i2c_core thinkpad_acpi rfkill output iTCO_wdt iTCO_vendor_support button joydev hwmon dm_snapshot dm_zero dm_mirror dm_region_hash dm_log uhci_hcd ohci_hcd ehci_hcd [last unloaded: microcode]
> Pid: 9, comm: sirq-tasklet/0 Not tainted 2.6.29-rc4-rt1-tip #50
> Call Trace:
>  [<ffffffff8023bd23>] warn_slowpath+0xaf/0xd6
>  [<ffffffff8035d176>] blkcipher_walk_first+0x72/0x1aa
>  [<ffffffff802309cb>] ? enqueue_task_fair+0x25/0x68
>  [<ffffffff8035d2f6>] blkcipher_walk_virt+0x1a/0x1c
>  [<ffffffff803620af>] crypto_ecb_crypt+0x2b/0x9a
>  [<ffffffff80359d20>] ? setkey+0xc4/0xd8
>  [<ffffffff8036426a>] ? arc4_crypt+0x0/0x5e
>  [<ffffffff8036214f>] crypto_ecb_decrypt+0x31/0x33
>  [<ffffffff8035c8fb>] ? setkey+0xba/0xcd
>  [<ffffffff8022bf8f>] ? __wake_up_common+0x49/0x7f
>  [<ffffffff80519beb>] ieee80211_wep_decrypt_data+0x5e/0x95
>  [<ffffffff80519d3a>] ieee80211_wep_decrypt+0x118/0x16f
>  [<ffffffff80519ddc>] ieee80211_crypto_wep_decrypt+0x4b/0x93
>  [<ffffffff80524d8f>] ieee80211_invoke_rx_handlers+0x26b/0x1395
>  [<ffffffff8021ce0f>] ? native_smp_send_reschedule+0x59/0x5b
>  [<ffffffff8022c699>] ? resched_task+0x60/0x62
>  [<ffffffff802367a9>] ? try_to_wake_up+0x352/0x364
>  [<ffffffff802367ca>] ? default_wake_function+0xf/0x11
>  [<ffffffff80526418>] __ieee80211_rx_handle_packet+0x55f/0x59c
>  [<ffffffff80526c82>] __ieee80211_rx+0x508/0x572
>  [<ffffffff80517451>] ieee80211_tasklet_handler+0x6d/0xff
>  [<ffffffff80241192>] __tasklet_action+0xa1/0x112
>  [<ffffffff80241277>] tasklet_action+0x39/0x3b
>  [<ffffffff80240eef>] ksoftirqd+0x162/0x278
>  [<ffffffff80240d8d>] ? ksoftirqd+0x0/0x278
>  [<ffffffff80240d8d>] ? ksoftirqd+0x0/0x278
>  [<ffffffff8024f5ce>] kthread+0x48/0x73
>  [<ffffffff8020cf6a>] child_rip+0xa/0x20
>  [<ffffffff8024f586>] ? kthread+0x0/0x73
>  [<ffffffff8020cf60>] ? child_rip+0x0/0x20
> - ---[ end trace b6a0ff9dfe960c5e ]---
> 
> It booted to runlevel 5, brought up GDM, I logged in and XFCE came up
> fine. It wasn't until NetworkManager started dorking around with the
> 802.11 adapter and started doing WEP things that I got the above
> warning. Right after I got this, NetworkManager connected and the
> system locked up. Sorry, no traceback from the panic.
> 
> I haven't gone far in looking at this, but it looks like we might have
> to adjust expectations in the crypto code, since it's probably ok to
> be in_irq() in this case, since we're actually in a kthread.

no, removing the warning would just hide the real bug.

Could you try the fix below please?

	Ingo

--------------------------------->
Subject: irq threading: fix PF_HARDIRQ definition
From: Ingo Molnar <mingo@elte.hu>
Date: Thu Feb 12 09:29:14 CET 2009

Clark Williams reported the following warning:

  WARNING: at crypto/blkcipher.c:327 blkcipher_walk_first+0x72/0x1aa()

 [<ffffffff8035d176>] blkcipher_walk_first+0x72/0x1aa
 [<ffffffff8035d2f6>] blkcipher_walk_virt+0x1a/0x1c
 [<ffffffff803620af>] crypto_ecb_crypt+0x2b/0x9a
 [<ffffffff8036214f>] crypto_ecb_decrypt+0x31/0x33
 [<ffffffff80519beb>] ieee80211_wep_decrypt_data+0x5e/0x95
 [<ffffffff80519d3a>] ieee80211_wep_decrypt+0x118/0x16f
 [<ffffffff80519ddc>] ieee80211_crypto_wep_decrypt+0x4b/0x93
 [<ffffffff80524d8f>] ieee80211_invoke_rx_handlers+0x26b/0x1395
 [<ffffffff80526418>] __ieee80211_rx_handle_packet+0x55f/0x59c
 [<ffffffff80526c82>] __ieee80211_rx+0x508/0x572
 [<ffffffff80517451>] ieee80211_tasklet_handler+0x6d/0xff
 [<ffffffff80241192>] __tasklet_action+0xa1/0x112
 [<ffffffff80241277>] tasklet_action+0x39/0x3b
 [<ffffffff80240eef>] ksoftirqd+0x162/0x278

Which comes from:

        if (WARN_ON_ONCE(in_irq()))
                return -EDEADLK;

This warning is surprising, as it clearly comes from a softirq
context.

The in_irq() definition looks like this on -rt:

  #define in_irq()        (hardirq_count() || (current->flags & PF_HARDIRQ))

hardirq_count() is correct, but looking at PF_HARDIRQ's definition in sched.h:

 #define PF_EXITPIDONE  0x00000008      /* pi exit done on shut down */
 #define PF_VCPU        0x00000010      /* I'm a virtual CPU */
 #define PF_HARDIRQ     0x08000020      /* hardirq context */
 #define PF_NOSCHED     0x00000020      /* Userspace does not expect scheduling */
 #define PF_FORKNOEXEC  0x00000040      /* forked but didn't exec */

Reveals that due to a typo it not only overlaps the PF_NOSCHED bit, but
also has a spurious 0x08000000 component.

Move it to a free slot: 0x00000080.

Reported-by: Clark Williams <williams@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 include/linux/sched.h |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

Index: tip/include/linux/sched.h
===================================================================
--- tip.orig/include/linux/sched.h
+++ tip/include/linux/sched.h
@@ -1721,9 +1721,9 @@ extern cputime_t task_gtime(struct task_
 #define PF_EXITING	0x00000004	/* getting shut down */
 #define PF_EXITPIDONE	0x00000008	/* pi exit done on shut down */
 #define PF_VCPU		0x00000010	/* I'm a virtual CPU */
-#define PF_HARDIRQ	0x08000020	/* hardirq context */
 #define PF_NOSCHED	0x00000020	/* Userspace does not expect scheduling */
 #define PF_FORKNOEXEC	0x00000040	/* forked but didn't exec */
+#define PF_HARDIRQ	0x00000080	/* hardirq context */
 #define PF_SUPERPRIV	0x00000100	/* used super-user privileges */
 #define PF_DUMPCORE	0x00000200	/* dumped core */
 #define PF_SIGNALED	0x00000400	/* killed by a signal */

^ permalink raw reply	[flat|nested] 359+ messages in thread

* Re: [patch] irq threading: fix PF_HARDIRQ definition
  2009-02-12  8:38   ` [patch] irq threading: fix PF_HARDIRQ definition Ingo Molnar
@ 2009-02-12  8:42     ` Ingo Molnar
  2009-02-12 16:50         ` Clark Williams
  0 siblings, 1 reply; 359+ messages in thread
From: Ingo Molnar @ 2009-02-12  8:42 UTC (permalink / raw)
  To: Clark Williams
  Cc: Thomas Gleixner, LKML, rt-users, Steven Rostedt, Peter Zijlstra,
	Carsten Emde


* Ingo Molnar <mingo@elte.hu> wrote:

> hardirq_count() is correct, but looking at PF_HARDIRQ's definition in sched.h:
> 
>  #define PF_EXITPIDONE  0x00000008      /* pi exit done on shut down */
>  #define PF_VCPU        0x00000010      /* I'm a virtual CPU */
>  #define PF_HARDIRQ     0x08000020      /* hardirq context */
>  #define PF_NOSCHED     0x00000020      /* Userspace does not expect scheduling */
>  #define PF_FORKNOEXEC  0x00000040      /* forked but didn't exec */
> 
> Reveals that due to a typo it not only overlaps the PF_NOSCHED bit, but
> also has a spurious 0x08000000 component.

The reason is that when we forward ported the definition, i first moved it
to the 0x08000000 slot - but that slot was already taken. (our PF_ task
flag space is really crowded ...)

Then i moved it to a free spot, 0x20. Or so i thought: a later -rt patch
in the queue introduced PF_NOSCHED which overlapped it.

But the bigger problem was the spurious 0x08000000 component, which overlaps
with:

 #define PF_SOFTIRQ      0x08000000      /* softirq context */

Explaining why the warning triggered in ksoftirqd ;-)

Anyway, my fix should solve this. Do you still see the lockup under X? (make
sure you also have the IPI fix applied, see the patch in this same thread.)

	Ingo

^ permalink raw reply	[flat|nested] 359+ messages in thread

* Re: [patch] rt: fix ipi kfree(), introduce IPI_SOFTIRQ
  2009-02-12  8:19       ` [patch] rt: fix ipi kfree(), introduce IPI_SOFTIRQ Ingo Molnar
  2009-02-12  8:22         ` Ingo Molnar
  2009-02-12  8:27         ` Ingo Molnar
@ 2009-02-12  9:22         ` Peter Zijlstra
  2009-02-12 10:07             ` Ingo Molnar
  2 siblings, 1 reply; 359+ messages in thread
From: Peter Zijlstra @ 2009-02-12  9:22 UTC (permalink / raw)
  To: Ingo Molnar
  Cc: Frederic Weisbecker, Thomas Gleixner, LKML, rt-users,
	Steven Rostedt, Carsten Emde, Clark Williams

On Thu, 2009-02-12 at 09:19 +0100, Ingo Molnar wrote:
> * Ingo Molnar <mingo@elte.hu> wrote:
> 
> > hm, that's a complex one - we do kfree() from IPI context, [...]
> 
> The patch below might do the trick - it offloads this to a softirq.
> Not tested yet.

The simple fix is something like:

---
 kernel/smp.c |    8 ++++++++
 1 files changed, 8 insertions(+), 0 deletions(-)

diff --git a/kernel/smp.c b/kernel/smp.c
index bbedbb7..9b974c1 100644
--- a/kernel/smp.c
+++ b/kernel/smp.c
@@ -252,7 +252,11 @@ int smp_call_function_single(int cpu, void (*func) (void *info), void *info,
 			 * will make sure the callee is done with the
 			 * data before a new caller will use it.
 			 */
+#ifndef CONFIG_PREEMPT_RT
 			data = kmalloc(sizeof(*data), GFP_ATOMIC);
+#else
+			data = NULL;
+#endif
 			if (data)
 				data->flags = CSD_FLAG_ALLOC;
 			else {
@@ -347,7 +351,11 @@ void smp_call_function_many(const struct cpumask *mask,
 		return;
 	}
 
+#ifndef CONFIG_PREEMPT_RT
 	data = kmalloc(sizeof(*data) + cpumask_size(), GFP_ATOMIC);
+#else
+	data = NULL;
+#endif
 	if (unlikely(!data)) {
 		/* Slow path. */
 		for_each_online_cpu(cpu) {


^ permalink raw reply related	[flat|nested] 359+ messages in thread

* [patch] generic-ipi: remove kmalloc, cleanup
  2009-02-12  9:22         ` Peter Zijlstra
@ 2009-02-12 10:07             ` Ingo Molnar
  0 siblings, 0 replies; 359+ messages in thread
From: Ingo Molnar @ 2009-02-12 10:07 UTC (permalink / raw)
  To: Peter Zijlstra
  Cc: Frederic Weisbecker, Thomas Gleixner, LKML, rt-users,
	Steven Rostedt, Carsten Emde, Clark Williams


* Peter Zijlstra <peterz@infradead.org> wrote:

> On Thu, 2009-02-12 at 09:19 +0100, Ingo Molnar wrote:
> > * Ingo Molnar <mingo@elte.hu> wrote:
> > 
> > > hm, that's a complex one - we do kfree() from IPI context, [...]
> > 
> > The patch below might do the trick - it offloads this to a softirq.
> > Not tested yet.
> 
> The simple fix is something like:
> 
> ---
>  kernel/smp.c |    8 ++++++++
>  1 files changed, 8 insertions(+), 0 deletions(-)

ok, i made it unconditional (not just a PREEMPT_RT hac) and did the
cleanup below on top of it.

I dont think repeat, queued IPIs are all that interesting from a
performance point of view. If they are, it will all be clearly
bisectable.

	Ingo

--------------->
Subject: generic-ipi: remove kmalloc, cleanup
From: Ingo Molnar <mingo@elte.hu>

Now that we dont use the kmalloc() sequence anymore, remove
CSD_FLAG_ALLOC and all its dependencies.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 kernel/smp.c |   86 +++++++++++------------------------------------------------
 1 file changed, 17 insertions(+), 69 deletions(-)

Index: tip/kernel/smp.c
===================================================================
--- tip.orig/kernel/smp.c
+++ tip/kernel/smp.c
@@ -17,8 +17,7 @@ __cacheline_aligned_in_smp DEFINE_RAW_SP
 
 enum {
 	CSD_FLAG_WAIT		= 0x01,
-	CSD_FLAG_ALLOC		= 0x02,
-	CSD_FLAG_LOCK		= 0x04,
+	CSD_FLAG_LOCK		= 0x02,
 };
 
 struct call_function_data {
@@ -85,15 +84,6 @@ static void generic_exec_single(int cpu,
 		csd_flag_wait(data);
 }
 
-static void rcu_free_call_data(struct rcu_head *head)
-{
-	struct call_function_data *data;
-
-	data = container_of(head, struct call_function_data, rcu_head);
-
-	kfree(data);
-}
-
 /*
  * Invoked by arch to handle an IPI for call function. Must be called with
  * interrupts disabled.
@@ -138,8 +128,6 @@ void generic_smp_call_function_interrupt
 			smp_wmb();
 			data->csd.flags &= ~CSD_FLAG_WAIT;
 		}
-		if (data->csd.flags & CSD_FLAG_ALLOC)
-			call_rcu(&data->rcu_head, rcu_free_call_data);
 	}
 	rcu_read_unlock();
 
@@ -190,8 +178,7 @@ void generic_smp_call_function_single_in
 			} else if (data_flags & CSD_FLAG_LOCK) {
 				smp_wmb();
 				data->flags &= ~CSD_FLAG_LOCK;
-			} else if (data_flags & CSD_FLAG_ALLOC)
-				kfree(data);
+			}
 		}
 		/*
 		 * See comment on outer loop
@@ -236,13 +223,11 @@ int smp_call_function_single(int cpu, vo
 			/*
 			 * We are calling a function on a single CPU
 			 * and we are not going to wait for it to finish.
-			 * We first try to allocate the data, but if we
-			 * fail, we fall back to use a per cpu data to pass
-			 * the information to that CPU. Since all callers
-			 * of this code will use the same data, we must
-			 * synchronize the callers to prevent a new caller
-			 * from corrupting the data before the callee
-			 * can access it.
+			 * We use a per cpu data to pass the information to
+			 * that CPU. Since all callers of this code will use
+			 * the same data, we must synchronize the callers to
+			 * prevent a new caller from corrupting the data before
+			 * the callee can access it.
 			 *
 			 * The CSD_FLAG_LOCK is used to let us know when
 			 * the IPI handler is done with the data.
@@ -252,15 +237,10 @@ int smp_call_function_single(int cpu, vo
 			 * will make sure the callee is done with the
 			 * data before a new caller will use it.
 			 */
-			data = NULL;
-			if (data)
-				data->flags = CSD_FLAG_ALLOC;
-			else {
-				data = &per_cpu(csd_data, me);
-				while (data->flags & CSD_FLAG_LOCK)
-					cpu_relax();
-				data->flags = CSD_FLAG_LOCK;
-			}
+			data = &per_cpu(csd_data, me);
+			while (data->flags & CSD_FLAG_LOCK)
+				cpu_relax();
+			data->flags = CSD_FLAG_LOCK;
 		} else {
 			data = &d;
 			data->flags = CSD_FLAG_WAIT;
@@ -321,8 +301,6 @@ void smp_call_function_many(const struct
 			    void (*func)(void *), void *info,
 			    bool wait)
 {
-	struct call_function_data *data;
-	unsigned long flags;
 	int cpu, next_cpu;
 
 	/* Can deadlock when called with interrupts disabled */
@@ -347,43 +325,13 @@ void smp_call_function_many(const struct
 		return;
 	}
 
-	data = NULL;
-	if (unlikely(!data)) {
-		/* Slow path. */
-		for_each_online_cpu(cpu) {
-			if (cpu == smp_processor_id())
-				continue;
-			if (cpumask_test_cpu(cpu, mask))
-				smp_call_function_single(cpu, func, info, wait);
-		}
-		return;
+	/* Slow path. */
+	for_each_online_cpu(cpu) {
+		if (cpu == smp_processor_id())
+			continue;
+		if (cpumask_test_cpu(cpu, mask))
+			smp_call_function_single(cpu, func, info, wait);
 	}
-
-	spin_lock_init(&data->lock);
-	data->csd.flags = CSD_FLAG_ALLOC;
-	if (wait)
-		data->csd.flags |= CSD_FLAG_WAIT;
-	data->csd.func = func;
-	data->csd.info = info;
-	cpumask_and(to_cpumask(data->cpumask_bits), mask, cpu_online_mask);
-	cpumask_clear_cpu(smp_processor_id(), to_cpumask(data->cpumask_bits));
-	data->refs = cpumask_weight(to_cpumask(data->cpumask_bits));
-
-	spin_lock_irqsave(&call_function_lock, flags);
-	list_add_tail_rcu(&data->csd.list, &call_function_queue);
-	spin_unlock_irqrestore(&call_function_lock, flags);
-
-	/*
-	 * Make the list addition visible before sending the ipi.
-	 */
-	smp_mb();
-
-	/* Send a message to all CPUs in the map */
-	arch_send_call_function_ipi_mask(to_cpumask(data->cpumask_bits));
-
-	/* optionally wait for the CPUs to complete */
-	if (wait)
-		csd_flag_wait(&data->csd);
 }
 EXPORT_SYMBOL(smp_call_function_many);
 

^ permalink raw reply	[flat|nested] 359+ messages in thread

* [patch] generic-ipi: remove kmalloc, cleanup
@ 2009-02-12 10:07             ` Ingo Molnar
  0 siblings, 0 replies; 359+ messages in thread
From: Ingo Molnar @ 2009-02-12 10:07 UTC (permalink / raw)
  To: Peter Zijlstra
  Cc: Frederic Weisbecker, Thomas Gleixner, LKML, rt-users,
	Steven Rostedt, Carsten Emde, Clark Williams


* Peter Zijlstra <peterz@infradead.org> wrote:

> On Thu, 2009-02-12 at 09:19 +0100, Ingo Molnar wrote:
> > * Ingo Molnar <mingo@elte.hu> wrote:
> > 
> > > hm, that's a complex one - we do kfree() from IPI context, [...]
> > 
> > The patch below might do the trick - it offloads this to a softirq.
> > Not tested yet.
> 
> The simple fix is something like:
> 
> ---
>  kernel/smp.c |    8 ++++++++
>  1 files changed, 8 insertions(+), 0 deletions(-)

ok, i made it unconditional (not just a PREEMPT_RT hac) and did the
cleanup below on top of it.

I dont think repeat, queued IPIs are all that interesting from a
performance point of view. If they are, it will all be clearly
bisectable.

	Ingo

--------------->
Subject: generic-ipi: remove kmalloc, cleanup
From: Ingo Molnar <mingo@elte.hu>

Now that we dont use the kmalloc() sequence anymore, remove
CSD_FLAG_ALLOC and all its dependencies.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 kernel/smp.c |   86 +++++++++++------------------------------------------------
 1 file changed, 17 insertions(+), 69 deletions(-)

Index: tip/kernel/smp.c
===================================================================
--- tip.orig/kernel/smp.c
+++ tip/kernel/smp.c
@@ -17,8 +17,7 @@ __cacheline_aligned_in_smp DEFINE_RAW_SP
 
 enum {
 	CSD_FLAG_WAIT		= 0x01,
-	CSD_FLAG_ALLOC		= 0x02,
-	CSD_FLAG_LOCK		= 0x04,
+	CSD_FLAG_LOCK		= 0x02,
 };
 
 struct call_function_data {
@@ -85,15 +84,6 @@ static void generic_exec_single(int cpu,
 		csd_flag_wait(data);
 }
 
-static void rcu_free_call_data(struct rcu_head *head)
-{
-	struct call_function_data *data;
-
-	data = container_of(head, struct call_function_data, rcu_head);
-
-	kfree(data);
-}
-
 /*
  * Invoked by arch to handle an IPI for call function. Must be called with
  * interrupts disabled.
@@ -138,8 +128,6 @@ void generic_smp_call_function_interrupt
 			smp_wmb();
 			data->csd.flags &= ~CSD_FLAG_WAIT;
 		}
-		if (data->csd.flags & CSD_FLAG_ALLOC)
-			call_rcu(&data->rcu_head, rcu_free_call_data);
 	}
 	rcu_read_unlock();
 
@@ -190,8 +178,7 @@ void generic_smp_call_function_single_in
 			} else if (data_flags & CSD_FLAG_LOCK) {
 				smp_wmb();
 				data->flags &= ~CSD_FLAG_LOCK;
-			} else if (data_flags & CSD_FLAG_ALLOC)
-				kfree(data);
+			}
 		}
 		/*
 		 * See comment on outer loop
@@ -236,13 +223,11 @@ int smp_call_function_single(int cpu, vo
 			/*
 			 * We are calling a function on a single CPU
 			 * and we are not going to wait for it to finish.
-			 * We first try to allocate the data, but if we
-			 * fail, we fall back to use a per cpu data to pass
-			 * the information to that CPU. Since all callers
-			 * of this code will use the same data, we must
-			 * synchronize the callers to prevent a new caller
-			 * from corrupting the data before the callee
-			 * can access it.
+			 * We use a per cpu data to pass the information to
+			 * that CPU. Since all callers of this code will use
+			 * the same data, we must synchronize the callers to
+			 * prevent a new caller from corrupting the data before
+			 * the callee can access it.
 			 *
 			 * The CSD_FLAG_LOCK is used to let us know when
 			 * the IPI handler is done with the data.
@@ -252,15 +237,10 @@ int smp_call_function_single(int cpu, vo
 			 * will make sure the callee is done with the
 			 * data before a new caller will use it.
 			 */
-			data = NULL;
-			if (data)
-				data->flags = CSD_FLAG_ALLOC;
-			else {
-				data = &per_cpu(csd_data, me);
-				while (data->flags & CSD_FLAG_LOCK)
-					cpu_relax();
-				data->flags = CSD_FLAG_LOCK;
-			}
+			data = &per_cpu(csd_data, me);
+			while (data->flags & CSD_FLAG_LOCK)
+				cpu_relax();
+			data->flags = CSD_FLAG_LOCK;
 		} else {
 			data = &d;
 			data->flags = CSD_FLAG_WAIT;
@@ -321,8 +301,6 @@ void smp_call_function_many(const struct
 			    void (*func)(void *), void *info,
 			    bool wait)
 {
-	struct call_function_data *data;
-	unsigned long flags;
 	int cpu, next_cpu;
 
 	/* Can deadlock when called with interrupts disabled */
@@ -347,43 +325,13 @@ void smp_call_function_many(const struct
 		return;
 	}
 
-	data = NULL;
-	if (unlikely(!data)) {
-		/* Slow path. */
-		for_each_online_cpu(cpu) {
-			if (cpu == smp_processor_id())
-				continue;
-			if (cpumask_test_cpu(cpu, mask))
-				smp_call_function_single(cpu, func, info, wait);
-		}
-		return;
+	/* Slow path. */
+	for_each_online_cpu(cpu) {
+		if (cpu == smp_processor_id())
+			continue;
+		if (cpumask_test_cpu(cpu, mask))
+			smp_call_function_single(cpu, func, info, wait);
 	}
-
-	spin_lock_init(&data->lock);
-	data->csd.flags = CSD_FLAG_ALLOC;
-	if (wait)
-		data->csd.flags |= CSD_FLAG_WAIT;
-	data->csd.func = func;
-	data->csd.info = info;
-	cpumask_and(to_cpumask(data->cpumask_bits), mask, cpu_online_mask);
-	cpumask_clear_cpu(smp_processor_id(), to_cpumask(data->cpumask_bits));
-	data->refs = cpumask_weight(to_cpumask(data->cpumask_bits));
-
-	spin_lock_irqsave(&call_function_lock, flags);
-	list_add_tail_rcu(&data->csd.list, &call_function_queue);
-	spin_unlock_irqrestore(&call_function_lock, flags);
-
-	/*
-	 * Make the list addition visible before sending the ipi.
-	 */
-	smp_mb();
-
-	/* Send a message to all CPUs in the map */
-	arch_send_call_function_ipi_mask(to_cpumask(data->cpumask_bits));

^ permalink raw reply	[flat|nested] 359+ messages in thread

* Re: [patch] generic-ipi: remove kmalloc, cleanup
  2009-02-12 10:07             ` Ingo Molnar
  (?)
@ 2009-02-12 10:16             ` Peter Zijlstra
  2009-02-12 12:09               ` Peter Zijlstra
  -1 siblings, 1 reply; 359+ messages in thread
From: Peter Zijlstra @ 2009-02-12 10:16 UTC (permalink / raw)
  To: Ingo Molnar
  Cc: Frederic Weisbecker, Thomas Gleixner, LKML, rt-users,
	Steven Rostedt, Carsten Emde, Clark Williams, rusty

On Thu, 2009-02-12 at 11:07 +0100, Ingo Molnar wrote:
> * Peter Zijlstra <peterz@infradead.org> wrote:
> 
> > On Thu, 2009-02-12 at 09:19 +0100, Ingo Molnar wrote:
> > > * Ingo Molnar <mingo@elte.hu> wrote:
> > > 
> > > > hm, that's a complex one - we do kfree() from IPI context, [...]
> > > 
> > > The patch below might do the trick - it offloads this to a softirq.
> > > Not tested yet.
> > 
> > The simple fix is something like:
> > 
> > ---
> >  kernel/smp.c |    8 ++++++++
> >  1 files changed, 8 insertions(+), 0 deletions(-)
> 
> ok, i made it unconditional (not just a PREEMPT_RT hac) and did the
> cleanup below on top of it.
> 
> I dont think repeat, queued IPIs are all that interesting from a
> performance point of view. If they are, it will all be clearly
> bisectable.

Right, except I really don't like the smp_call_function_many() slow path
that's now the only path.

Rusty did that I think, but he also had some idea on how to fix it, I
think it boiled down to sticking a count in the call data instead of the
full cpumask.

So I'd rather we first fix that code, and then remove the kmalloc
all-together like you propose here.

> 	Ingo
> 
> --------------->
> Subject: generic-ipi: remove kmalloc, cleanup
> From: Ingo Molnar <mingo@elte.hu>
> 
> Now that we dont use the kmalloc() sequence anymore, remove
> CSD_FLAG_ALLOC and all its dependencies.
> 
> Signed-off-by: Ingo Molnar <mingo@elte.hu>
> ---
>  kernel/smp.c |   86 +++++++++++------------------------------------------------
>  1 file changed, 17 insertions(+), 69 deletions(-)
> 
> Index: tip/kernel/smp.c
> ===================================================================
> --- tip.orig/kernel/smp.c
> +++ tip/kernel/smp.c
> @@ -17,8 +17,7 @@ __cacheline_aligned_in_smp DEFINE_RAW_SP
>  
>  enum {
>  	CSD_FLAG_WAIT		= 0x01,
> -	CSD_FLAG_ALLOC		= 0x02,
> -	CSD_FLAG_LOCK		= 0x04,
> +	CSD_FLAG_LOCK		= 0x02,
>  };
>  
>  struct call_function_data {
> @@ -85,15 +84,6 @@ static void generic_exec_single(int cpu,
>  		csd_flag_wait(data);
>  }
>  
> -static void rcu_free_call_data(struct rcu_head *head)
> -{
> -	struct call_function_data *data;
> -
> -	data = container_of(head, struct call_function_data, rcu_head);
> -
> -	kfree(data);
> -}
> -
>  /*
>   * Invoked by arch to handle an IPI for call function. Must be called with
>   * interrupts disabled.
> @@ -138,8 +128,6 @@ void generic_smp_call_function_interrupt
>  			smp_wmb();
>  			data->csd.flags &= ~CSD_FLAG_WAIT;
>  		}
> -		if (data->csd.flags & CSD_FLAG_ALLOC)
> -			call_rcu(&data->rcu_head, rcu_free_call_data);
>  	}
>  	rcu_read_unlock();
>  
> @@ -190,8 +178,7 @@ void generic_smp_call_function_single_in
>  			} else if (data_flags & CSD_FLAG_LOCK) {
>  				smp_wmb();
>  				data->flags &= ~CSD_FLAG_LOCK;
> -			} else if (data_flags & CSD_FLAG_ALLOC)
> -				kfree(data);
> +			}
>  		}
>  		/*
>  		 * See comment on outer loop
> @@ -236,13 +223,11 @@ int smp_call_function_single(int cpu, vo
>  			/*
>  			 * We are calling a function on a single CPU
>  			 * and we are not going to wait for it to finish.
> -			 * We first try to allocate the data, but if we
> -			 * fail, we fall back to use a per cpu data to pass
> -			 * the information to that CPU. Since all callers
> -			 * of this code will use the same data, we must
> -			 * synchronize the callers to prevent a new caller
> -			 * from corrupting the data before the callee
> -			 * can access it.
> +			 * We use a per cpu data to pass the information to
> +			 * that CPU. Since all callers of this code will use
> +			 * the same data, we must synchronize the callers to
> +			 * prevent a new caller from corrupting the data before
> +			 * the callee can access it.
>  			 *
>  			 * The CSD_FLAG_LOCK is used to let us know when
>  			 * the IPI handler is done with the data.
> @@ -252,15 +237,10 @@ int smp_call_function_single(int cpu, vo
>  			 * will make sure the callee is done with the
>  			 * data before a new caller will use it.
>  			 */
> -			data = NULL;
> -			if (data)
> -				data->flags = CSD_FLAG_ALLOC;
> -			else {
> -				data = &per_cpu(csd_data, me);
> -				while (data->flags & CSD_FLAG_LOCK)
> -					cpu_relax();
> -				data->flags = CSD_FLAG_LOCK;
> -			}
> +			data = &per_cpu(csd_data, me);
> +			while (data->flags & CSD_FLAG_LOCK)
> +				cpu_relax();
> +			data->flags = CSD_FLAG_LOCK;
>  		} else {
>  			data = &d;
>  			data->flags = CSD_FLAG_WAIT;
> @@ -321,8 +301,6 @@ void smp_call_function_many(const struct
>  			    void (*func)(void *), void *info,
>  			    bool wait)
>  {
> -	struct call_function_data *data;
> -	unsigned long flags;
>  	int cpu, next_cpu;
>  
>  	/* Can deadlock when called with interrupts disabled */
> @@ -347,43 +325,13 @@ void smp_call_function_many(const struct
>  		return;
>  	}
>  
> -	data = NULL;
> -	if (unlikely(!data)) {
> -		/* Slow path. */
> -		for_each_online_cpu(cpu) {
> -			if (cpu == smp_processor_id())
> -				continue;
> -			if (cpumask_test_cpu(cpu, mask))
> -				smp_call_function_single(cpu, func, info, wait);
> -		}
> -		return;
> +	/* Slow path. */
> +	for_each_online_cpu(cpu) {
> +		if (cpu == smp_processor_id())
> +			continue;
> +		if (cpumask_test_cpu(cpu, mask))
> +			smp_call_function_single(cpu, func, info, wait);
>  	}
> -
> -	spin_lock_init(&data->lock);
> -	data->csd.flags = CSD_FLAG_ALLOC;
> -	if (wait)
> -		data->csd.flags |= CSD_FLAG_WAIT;
> -	data->csd.func = func;
> -	data->csd.info = info;
> -	cpumask_and(to_cpumask(data->cpumask_bits), mask, cpu_online_mask);
> -	cpumask_clear_cpu(smp_processor_id(), to_cpumask(data->cpumask_bits));
> -	data->refs = cpumask_weight(to_cpumask(data->cpumask_bits));
> -
> -	spin_lock_irqsave(&call_function_lock, flags);
> -	list_add_tail_rcu(&data->csd.list, &call_function_queue);
> -	spin_unlock_irqrestore(&call_function_lock, flags);
> -
> -	/*
> -	 * Make the list addition visible before sending the ipi.
> -	 */
> -	smp_mb();
> -
> -	/* Send a message to all CPUs in the map */
> -	arch_send_call_function_ipi_mask(to_cpumask(data->cpumask_bits));
> -
> -	/* optionally wait for the CPUs to complete */
> -	if (wait)
> -		csd_flag_wait(&data->csd);
>  }
>  EXPORT_SYMBOL(smp_call_function_many);
>  

^ permalink raw reply	[flat|nested] 359+ messages in thread

* [patch] rt: res_counter fix
  2009-02-12  2:12   ` Frederic Weisbecker
  2009-02-12  8:18     ` Ingo Molnar
@ 2009-02-12 10:16     ` Ingo Molnar
  2009-02-12 10:21       ` [patch] rt: res_counter fix, v2 Ingo Molnar
  1 sibling, 1 reply; 359+ messages in thread
From: Ingo Molnar @ 2009-02-12 10:16 UTC (permalink / raw)
  To: Frederic Weisbecker, Peter Zijlstra
  Cc: Thomas Gleixner, LKML, rt-users, Steven Rostedt, Peter Zijlstra,
	Carsten Emde, Clark Williams


* Frederic Weisbecker <fweisbec@gmail.com> wrote:

> > I get some sleep while atomic warnings.
> > I've put the log and my config in attachment.
> 
> Note, it's a wicked bug: I can't reproduce it anymore.
> I would have been glad to give you an irqsoff trace but I can't :-)

i tried your config and after a few bootups the warning did trigger.

It's the new resource counter code. The IRQ flags disabling it does
seems a bit dubious to me. Peter, what do you think?

Frederic, could you try the patch below?

	Ingo

----------->
Subject: rt: res_counter fix
From: Ingo Molnar <mingo@elte.hu>
Date: Thu Feb 12 11:11:47 CET 2009

Frederic Weisbecker reported this warning:

[   45.228562] BUG: sleeping function called from invalid context at kernel/rtmutex.c:683
[   45.228571] in_atomic(): 0, irqs_disabled(): 1, pid: 4290, name: ntpdate
[   45.228576] INFO: lockdep is turned off.
[   45.228580] irq event stamp: 0
[   45.228583] hardirqs last  enabled at (0): [<(null)>] (null)
[   45.228589] hardirqs last disabled at (0): [<ffffffff8025449d>] copy_process+0x68d/0x1500
[   45.228602] softirqs last  enabled at (0): [<ffffffff8025449d>] copy_process+0x68d/0x1500
[   45.228609] softirqs last disabled at (0): [<(null)>] (null)
[   45.228617] Pid: 4290, comm: ntpdate Tainted: G        W  2.6.29-rc4-rt1-tip #1
[   45.228622] Call Trace:
[   45.228632]  [<ffffffff8027dfb0>] ? print_irqtrace_events+0xd0/0xe0
[   45.228639]  [<ffffffff8024cd73>] __might_sleep+0x113/0x130
[   45.228646]  [<ffffffff8077c811>] rt_spin_lock+0xa1/0xb0
[   45.228653]  [<ffffffff80296a3d>] res_counter_charge+0x5d/0x130
[   45.228660]  [<ffffffff802fb67f>] __mem_cgroup_try_charge+0x7f/0x180
[   45.228667]  [<ffffffff802fc407>] mem_cgroup_charge_common+0x57/0x90
[   45.228674]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[   45.228680]  [<ffffffff802fc49d>] mem_cgroup_newpage_charge+0x5d/0x60
[   45.228688]  [<ffffffff802d94ce>] __do_fault+0x29e/0x4c0
[   45.228694]  [<ffffffff8077c843>] ? rt_spin_unlock+0x23/0x80
[   45.228700]  [<ffffffff802db8b5>] handle_mm_fault+0x205/0x890
[   45.228707]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[   45.228714]  [<ffffffff8023495e>] do_page_fault+0x11e/0x2a0
[   45.228720]  [<ffffffff8077e5a5>] page_fault+0x25/0x30
[   45.228727]  [<ffffffff8043e1ed>] ? __clear_user+0x3d/0x70
[   45.228733]  [<ffffffff8043e1d1>] ? __clear_user+0x21/0x70

The reason is the raw IRQ flag use of kernel/res_counter.c.

The irq flags tricks there seem a bit pointless: it cannot
protect the c->parent linkage because local_irq_save() is
only per CPU.

So replace it with _nort(). This code needs a second look.

Reported-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 kernel/res_counter.c |    8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

Index: tip/kernel/res_counter.c
===================================================================
--- tip.orig/kernel/res_counter.c
+++ tip/kernel/res_counter.c
@@ -43,7 +43,7 @@ int res_counter_charge(struct res_counte
 	struct res_counter *c, *u;
 
 	*limit_fail_at = NULL;
-	local_irq_save(flags);
+	local_irq_save_nort(flags);
 	for (c = counter; c != NULL; c = c->parent) {
 		spin_lock(&c->lock);
 		ret = res_counter_charge_locked(c, val);
@@ -62,7 +62,7 @@ undo:
 		spin_unlock(&u->lock);
 	}
 done:
-	local_irq_restore(flags);
+	local_irq_restore_nort(flags);
 	return ret;
 }
 
@@ -79,13 +79,13 @@ void res_counter_uncharge(struct res_cou
 	unsigned long flags;
 	struct res_counter *c;
 
-	local_irq_save(flags);
+	local_irq_save_nort(flags);
 	for (c = counter; c != NULL; c = c->parent) {
 		spin_lock(&c->lock);
 		res_counter_uncharge_locked(c, val);
 		spin_unlock(&c->lock);
 	}
-	local_irq_restore(flags);
+	local_irq_restore_nort(flags);
 }
 
 

^ permalink raw reply	[flat|nested] 359+ messages in thread

* [patch] rt: res_counter fix, v2
  2009-02-12 10:16     ` [patch] rt: res_counter fix Ingo Molnar
@ 2009-02-12 10:21       ` Ingo Molnar
  2009-02-12 10:46         ` KAMEZAWA Hiroyuki
  2009-02-12 14:28         ` Frederic Weisbecker
  0 siblings, 2 replies; 359+ messages in thread
From: Ingo Molnar @ 2009-02-12 10:21 UTC (permalink / raw)
  To: Frederic Weisbecker, Peter Zijlstra
  Cc: Thomas Gleixner, LKML, rt-users, Steven Rostedt, Peter Zijlstra,
	Carsten Emde, Clark Williams


* Ingo Molnar <mingo@elte.hu> wrote:

> Frederic, could you try the patch below?

Please try v2 below - it might even build ;-)

	Ingo

------------------->
Subject: rt: res_counter fix
From: Ingo Molnar <mingo@elte.hu>
Date: Thu Feb 12 11:11:47 CET 2009

Frederic Weisbecker reported this warning:

[   45.228562] BUG: sleeping function called from invalid context at kernel/rtmutex.c:683
[   45.228571] in_atomic(): 0, irqs_disabled(): 1, pid: 4290, name: ntpdate
[   45.228576] INFO: lockdep is turned off.
[   45.228580] irq event stamp: 0
[   45.228583] hardirqs last  enabled at (0): [<(null)>] (null)
[   45.228589] hardirqs last disabled at (0): [<ffffffff8025449d>] copy_process+0x68d/0x1500
[   45.228602] softirqs last  enabled at (0): [<ffffffff8025449d>] copy_process+0x68d/0x1500
[   45.228609] softirqs last disabled at (0): [<(null)>] (null)
[   45.228617] Pid: 4290, comm: ntpdate Tainted: G        W  2.6.29-rc4-rt1-tip #1
[   45.228622] Call Trace:
[   45.228632]  [<ffffffff8027dfb0>] ? print_irqtrace_events+0xd0/0xe0
[   45.228639]  [<ffffffff8024cd73>] __might_sleep+0x113/0x130
[   45.228646]  [<ffffffff8077c811>] rt_spin_lock+0xa1/0xb0
[   45.228653]  [<ffffffff80296a3d>] res_counter_charge+0x5d/0x130
[   45.228660]  [<ffffffff802fb67f>] __mem_cgroup_try_charge+0x7f/0x180
[   45.228667]  [<ffffffff802fc407>] mem_cgroup_charge_common+0x57/0x90
[   45.228674]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[   45.228680]  [<ffffffff802fc49d>] mem_cgroup_newpage_charge+0x5d/0x60
[   45.228688]  [<ffffffff802d94ce>] __do_fault+0x29e/0x4c0
[   45.228694]  [<ffffffff8077c843>] ? rt_spin_unlock+0x23/0x80
[   45.228700]  [<ffffffff802db8b5>] handle_mm_fault+0x205/0x890
[   45.228707]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
[   45.228714]  [<ffffffff8023495e>] do_page_fault+0x11e/0x2a0
[   45.228720]  [<ffffffff8077e5a5>] page_fault+0x25/0x30
[   45.228727]  [<ffffffff8043e1ed>] ? __clear_user+0x3d/0x70
[   45.228733]  [<ffffffff8043e1d1>] ? __clear_user+0x21/0x70

The reason is the raw IRQ flag use of kernel/res_counter.c.

The irq flags tricks there seem a bit pointless: it cannot
protect the c->parent linkage because local_irq_save() is
only per CPU.

So replace it with _nort(). This code needs a second look.

Reported-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 kernel/res_counter.c |    9 +++++----
 1 file changed, 5 insertions(+), 4 deletions(-)

Index: tip/kernel/res_counter.c
===================================================================
--- tip.orig/kernel/res_counter.c
+++ tip/kernel/res_counter.c
@@ -14,6 +14,7 @@
 #include <linux/res_counter.h>
 #include <linux/uaccess.h>
 #include <linux/mm.h>
+#include <linux/interrupt.h>
 
 void res_counter_init(struct res_counter *counter, struct res_counter *parent)
 {
@@ -43,7 +44,7 @@ int res_counter_charge(struct res_counte
 	struct res_counter *c, *u;
 
 	*limit_fail_at = NULL;
-	local_irq_save(flags);
+	local_irq_save_nort(flags);
 	for (c = counter; c != NULL; c = c->parent) {
 		spin_lock(&c->lock);
 		ret = res_counter_charge_locked(c, val);
@@ -62,7 +63,7 @@ undo:
 		spin_unlock(&u->lock);
 	}
 done:
-	local_irq_restore(flags);
+	local_irq_restore_nort(flags);
 	return ret;
 }
 
@@ -79,13 +80,13 @@ void res_counter_uncharge(struct res_cou
 	unsigned long flags;
 	struct res_counter *c;
 
-	local_irq_save(flags);
+	local_irq_save_nort(flags);
 	for (c = counter; c != NULL; c = c->parent) {
 		spin_lock(&c->lock);
 		res_counter_uncharge_locked(c, val);
 		spin_unlock(&c->lock);
 	}
-	local_irq_restore(flags);
+	local_irq_restore_nort(flags);
 }
 
 

^ permalink raw reply	[flat|nested] 359+ messages in thread

* Re: [patch] rt: res_counter fix, v2
  2009-02-12 10:21       ` [patch] rt: res_counter fix, v2 Ingo Molnar
@ 2009-02-12 10:46         ` KAMEZAWA Hiroyuki
  2009-02-12 11:28           ` Ingo Molnar
  2009-02-12 14:28         ` Frederic Weisbecker
  1 sibling, 1 reply; 359+ messages in thread
From: KAMEZAWA Hiroyuki @ 2009-02-12 10:46 UTC (permalink / raw)
  To: Ingo Molnar
  Cc: Frederic Weisbecker, Peter Zijlstra, Thomas Gleixner, LKML,
	rt-users, Steven Rostedt, Peter Zijlstra, Carsten Emde,
	Clark Williams, balbir

On Thu, 12 Feb 2009 11:21:13 +0100
Ingo Molnar <mingo@elte.hu> wrote:

> 
> * Ingo Molnar <mingo@elte.hu> wrote:
> 
> > Frederic, could you try the patch below?
> 
> Please try v2 below - it might even build ;-)
> 
> 	Ingo
> 
> ------------------->
> Subject: rt: res_counter fix
> From: Ingo Molnar <mingo@elte.hu>
> Date: Thu Feb 12 11:11:47 CET 2009
> 
> Frederic Weisbecker reported this warning:
> 
> [   45.228562] BUG: sleeping function called from invalid context at kernel/rtmutex.c:683
> [   45.228571] in_atomic(): 0, irqs_disabled(): 1, pid: 4290, name: ntpdate
> [   45.228576] INFO: lockdep is turned off.
> [   45.228580] irq event stamp: 0
> [   45.228583] hardirqs last  enabled at (0): [<(null)>] (null)
> [   45.228589] hardirqs last disabled at (0): [<ffffffff8025449d>] copy_process+0x68d/0x1500
> [   45.228602] softirqs last  enabled at (0): [<ffffffff8025449d>] copy_process+0x68d/0x1500
> [   45.228609] softirqs last disabled at (0): [<(null)>] (null)
> [   45.228617] Pid: 4290, comm: ntpdate Tainted: G        W  2.6.29-rc4-rt1-tip #1
> [   45.228622] Call Trace:
> [   45.228632]  [<ffffffff8027dfb0>] ? print_irqtrace_events+0xd0/0xe0
> [   45.228639]  [<ffffffff8024cd73>] __might_sleep+0x113/0x130
> [   45.228646]  [<ffffffff8077c811>] rt_spin_lock+0xa1/0xb0
> [   45.228653]  [<ffffffff80296a3d>] res_counter_charge+0x5d/0x130
> [   45.228660]  [<ffffffff802fb67f>] __mem_cgroup_try_charge+0x7f/0x180
> [   45.228667]  [<ffffffff802fc407>] mem_cgroup_charge_common+0x57/0x90
> [   45.228674]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
> [   45.228680]  [<ffffffff802fc49d>] mem_cgroup_newpage_charge+0x5d/0x60
> [   45.228688]  [<ffffffff802d94ce>] __do_fault+0x29e/0x4c0
> [   45.228694]  [<ffffffff8077c843>] ? rt_spin_unlock+0x23/0x80
> [   45.228700]  [<ffffffff802db8b5>] handle_mm_fault+0x205/0x890
> [   45.228707]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
> [   45.228714]  [<ffffffff8023495e>] do_page_fault+0x11e/0x2a0
> [   45.228720]  [<ffffffff8077e5a5>] page_fault+0x25/0x30
> [   45.228727]  [<ffffffff8043e1ed>] ? __clear_user+0x3d/0x70
> [   45.228733]  [<ffffffff8043e1d1>] ? __clear_user+0x21/0x70
> 
> The reason is the raw IRQ flag use of kernel/res_counter.c.
> 
> The irq flags tricks there seem a bit pointless: it cannot
> protect the c->parent linkage because local_irq_save() is
> only per CPU.
> 
> So replace it with _nort(). This code needs a second look.
> 
I'm sorry for no knowledge about RT. Could you teach me what
local_irq_save_nort() does ?

Hmm, how about just replacaing _irq() with preempt_disable()/enable() ?
xxx_nort() is better ?

AFAIK, these will not be called from irq context. (Added Balbir to CC:)

Regards,
-Kame


> Reported-by: Frederic Weisbecker <fweisbec@gmail.com>
> Signed-off-by: Ingo Molnar <mingo@elte.hu>
> ---
>  kernel/res_counter.c |    9 +++++----
>  1 file changed, 5 insertions(+), 4 deletions(-)
> 
> Index: tip/kernel/res_counter.c
> ===================================================================
> --- tip.orig/kernel/res_counter.c
> +++ tip/kernel/res_counter.c
> @@ -14,6 +14,7 @@
>  #include <linux/res_counter.h>
>  #include <linux/uaccess.h>
>  #include <linux/mm.h>
> +#include <linux/interrupt.h>
>  
>  void res_counter_init(struct res_counter *counter, struct res_counter *parent)
>  {
> @@ -43,7 +44,7 @@ int res_counter_charge(struct res_counte
>  	struct res_counter *c, *u;
>  
>  	*limit_fail_at = NULL;
> -	local_irq_save(flags);
> +	local_irq_save_nort(flags);
>  	for (c = counter; c != NULL; c = c->parent) {
>  		spin_lock(&c->lock);
>  		ret = res_counter_charge_locked(c, val);
> @@ -62,7 +63,7 @@ undo:
>  		spin_unlock(&u->lock);
>  	}
>  done:
> -	local_irq_restore(flags);
> +	local_irq_restore_nort(flags);
>  	return ret;
>  }
>  
> @@ -79,13 +80,13 @@ void res_counter_uncharge(struct res_cou
>  	unsigned long flags;
>  	struct res_counter *c;
>  
> -	local_irq_save(flags);
> +	local_irq_save_nort(flags);
>  	for (c = counter; c != NULL; c = c->parent) {
>  		spin_lock(&c->lock);
>  		res_counter_uncharge_locked(c, val);
>  		spin_unlock(&c->lock);
>  	}
> -	local_irq_restore(flags);
> +	local_irq_restore_nort(flags);
>  }
>  
>  
> --
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at  http://www.tux.org/lkml/
> 


^ permalink raw reply	[flat|nested] 359+ messages in thread

* [patch] sched: cpu hotplug fix
  2009-02-12  8:18     ` Ingo Molnar
  2009-02-12  8:19       ` [patch] rt: fix ipi kfree(), introduce IPI_SOFTIRQ Ingo Molnar
@ 2009-02-12 10:50       ` Ingo Molnar
  1 sibling, 0 replies; 359+ messages in thread
From: Ingo Molnar @ 2009-02-12 10:50 UTC (permalink / raw)
  To: Frederic Weisbecker
  Cc: Thomas Gleixner, LKML, rt-users, Steven Rostedt, Peter Zijlstra,
	Carsten Emde, Clark Williams


The fix below addresses a lockdep warning i triggered with your config.

(You could hit this if you try to use s2ram or hibernation or explicit
CPU hotplug ops.)

	Ingo

-------------->
Subject: sched: cpu hotplug fix
From: Ingo Molnar <mingo@elte.hu>
Date: Thu Feb 12 11:35:40 CET 2009

rq_attach_root() does a kfree() with the runqueue lock held.

That's not a very wise move, fix it.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 kernel/sched.c |   15 ++++++++++++---
 1 file changed, 12 insertions(+), 3 deletions(-)

Index: tip/kernel/sched.c
===================================================================
--- tip.orig/kernel/sched.c
+++ tip/kernel/sched.c
@@ -7619,20 +7619,26 @@ static void free_rootdomain(struct root_
 
 static void rq_attach_root(struct rq *rq, struct root_domain *rd)
 {
+	struct root_domain *old_rd = NULL;
 	unsigned long flags;
 
 	spin_lock_irqsave(&rq->lock, flags);
 
 	if (rq->rd) {
-		struct root_domain *old_rd = rq->rd;
+		old_rd = rq->rd;
 
 		if (cpumask_test_cpu(rq->cpu, old_rd->online))
 			set_rq_offline(rq);
 
 		cpumask_clear_cpu(rq->cpu, old_rd->span);
 
-		if (atomic_dec_and_test(&old_rd->refcount))
-			free_rootdomain(old_rd);
+		/*
+		 * If we dont want to free the old_rt yet then
+		 * set old_rd to NULL to skip the freeing later
+		 * in this function:
+		 */
+		if (!atomic_dec_and_test(&old_rd->refcount))
+			old_rd = NULL;
 	}
 
 	atomic_inc(&rd->refcount);
@@ -7643,6 +7649,9 @@ static void rq_attach_root(struct rq *rq
 		set_rq_online(rq);
 
 	spin_unlock_irqrestore(&rq->lock, flags);
+
+	if (old_rd)
+		free_rootdomain(old_rd);
 }
 
 static int __init_refok init_rootdomain(struct root_domain *rd, bool bootmem)


^ permalink raw reply	[flat|nested] 359+ messages in thread

* Re: [patch] rt: res_counter fix, v2
  2009-02-12 10:46         ` KAMEZAWA Hiroyuki
@ 2009-02-12 11:28           ` Ingo Molnar
  2009-02-12 12:35             ` KAMEZAWA Hiroyuki
  2009-02-12 16:58             ` Balbir Singh
  0 siblings, 2 replies; 359+ messages in thread
From: Ingo Molnar @ 2009-02-12 11:28 UTC (permalink / raw)
  To: KAMEZAWA Hiroyuki
  Cc: Frederic Weisbecker, Peter Zijlstra, Thomas Gleixner, LKML,
	rt-users, Steven Rostedt, Peter Zijlstra, Carsten Emde,
	Clark Williams, balbir


* KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> wrote:

> On Thu, 12 Feb 2009 11:21:13 +0100
> Ingo Molnar <mingo@elte.hu> wrote:
> 
> > 
> > * Ingo Molnar <mingo@elte.hu> wrote:
> > 
> > > Frederic, could you try the patch below?
> > 
> > Please try v2 below - it might even build ;-)
> > 
> > 	Ingo
> > 
> > ------------------->
> > Subject: rt: res_counter fix
> > From: Ingo Molnar <mingo@elte.hu>
> > Date: Thu Feb 12 11:11:47 CET 2009
> > 
> > Frederic Weisbecker reported this warning:
> > 
> > [   45.228562] BUG: sleeping function called from invalid context at kernel/rtmutex.c:683
> > [   45.228571] in_atomic(): 0, irqs_disabled(): 1, pid: 4290, name: ntpdate
> > [   45.228576] INFO: lockdep is turned off.
> > [   45.228580] irq event stamp: 0
> > [   45.228583] hardirqs last  enabled at (0): [<(null)>] (null)
> > [   45.228589] hardirqs last disabled at (0): [<ffffffff8025449d>] copy_process+0x68d/0x1500
> > [   45.228602] softirqs last  enabled at (0): [<ffffffff8025449d>] copy_process+0x68d/0x1500
> > [   45.228609] softirqs last disabled at (0): [<(null)>] (null)
> > [   45.228617] Pid: 4290, comm: ntpdate Tainted: G        W  2.6.29-rc4-rt1-tip #1
> > [   45.228622] Call Trace:
> > [   45.228632]  [<ffffffff8027dfb0>] ? print_irqtrace_events+0xd0/0xe0
> > [   45.228639]  [<ffffffff8024cd73>] __might_sleep+0x113/0x130
> > [   45.228646]  [<ffffffff8077c811>] rt_spin_lock+0xa1/0xb0
> > [   45.228653]  [<ffffffff80296a3d>] res_counter_charge+0x5d/0x130
> > [   45.228660]  [<ffffffff802fb67f>] __mem_cgroup_try_charge+0x7f/0x180
> > [   45.228667]  [<ffffffff802fc407>] mem_cgroup_charge_common+0x57/0x90
> > [   45.228674]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
> > [   45.228680]  [<ffffffff802fc49d>] mem_cgroup_newpage_charge+0x5d/0x60
> > [   45.228688]  [<ffffffff802d94ce>] __do_fault+0x29e/0x4c0
> > [   45.228694]  [<ffffffff8077c843>] ? rt_spin_unlock+0x23/0x80
> > [   45.228700]  [<ffffffff802db8b5>] handle_mm_fault+0x205/0x890
> > [   45.228707]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
> > [   45.228714]  [<ffffffff8023495e>] do_page_fault+0x11e/0x2a0
> > [   45.228720]  [<ffffffff8077e5a5>] page_fault+0x25/0x30
> > [   45.228727]  [<ffffffff8043e1ed>] ? __clear_user+0x3d/0x70
> > [   45.228733]  [<ffffffff8043e1d1>] ? __clear_user+0x21/0x70
> > 
> > The reason is the raw IRQ flag use of kernel/res_counter.c.
> > 
> > The irq flags tricks there seem a bit pointless: it cannot
> > protect the c->parent linkage because local_irq_save() is
> > only per CPU.
> > 
> > So replace it with _nort(). This code needs a second look.
> > 
> I'm sorry for no knowledge about RT. Could you teach me what
> local_irq_save_nort() does ?
> 
> Hmm, how about just replacaing _irq() with preempt_disable()/enable() ?
> xxx_nort() is better ?
> 
> AFAIK, these will not be called from irq context. (Added Balbir to CC:)

_nort() will just turn them into NOPs in essence.

The question is, are these local IRQ flags manipulations really needed
in this code, and if yes, why?

	Ingo

^ permalink raw reply	[flat|nested] 359+ messages in thread

* Re: [patch] generic-ipi: remove kmalloc, cleanup
  2009-02-12 10:16             ` Peter Zijlstra
@ 2009-02-12 12:09               ` Peter Zijlstra
  2009-02-12 12:36                 ` Peter Zijlstra
                                   ` (2 more replies)
  0 siblings, 3 replies; 359+ messages in thread
From: Peter Zijlstra @ 2009-02-12 12:09 UTC (permalink / raw)
  To: Ingo Molnar
  Cc: Frederic Weisbecker, Thomas Gleixner, LKML, rt-users,
	Steven Rostedt, Carsten Emde, Clark Williams, rusty

On Thu, 2009-02-12 at 11:16 +0100, Peter Zijlstra wrote:
> On Thu, 2009-02-12 at 11:07 +0100, Ingo Molnar wrote:
> > * Peter Zijlstra <peterz@infradead.org> wrote:
> > 
> > > On Thu, 2009-02-12 at 09:19 +0100, Ingo Molnar wrote:
> > > > * Ingo Molnar <mingo@elte.hu> wrote:
> > > > 
> > > > > hm, that's a complex one - we do kfree() from IPI context, [...]
> > > > 
> > > > The patch below might do the trick - it offloads this to a softirq.
> > > > Not tested yet.
> > > 
> > > The simple fix is something like:
> > > 
> > > ---
> > >  kernel/smp.c |    8 ++++++++
> > >  1 files changed, 8 insertions(+), 0 deletions(-)
> > 
> > ok, i made it unconditional (not just a PREEMPT_RT hac) and did the
> > cleanup below on top of it.
> > 
> > I dont think repeat, queued IPIs are all that interesting from a
> > performance point of view. If they are, it will all be clearly
> > bisectable.
> 
> Right, except I really don't like the smp_call_function_many() slow path
> that's now the only path.
> 
> Rusty did that I think, but he also had some idea on how to fix it, I
> think it boiled down to sticking a count in the call data instead of the
> full cpumask.
> 
> So I'd rather we first fix that code, and then remove the kmalloc
> all-together like you propose here.

Right, I can't see a way around carrying that cpumask, there's just too
much that can go wrong without it.

So it put in unconditionally, how about this?


--
Subject: generic-smp: remove single ipi fallback for smp_call_function_many()

In preparation of removing the kmalloc() calls from the generic-ipi code
get rid of the single ipi fallback for smp_call_function_many().

Because we cannot get around carrying the cpumask in the data -- imagine
2 such calls with different but overlapping masks -- put in a full mask.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
---
 kernel/smp.c |   47 ++++++++++++++++++++++++-----------------------
 1 files changed, 24 insertions(+), 23 deletions(-)

diff --git a/kernel/smp.c b/kernel/smp.c
index bbedbb7..e6658e5 100644
--- a/kernel/smp.c
+++ b/kernel/smp.c
@@ -26,7 +26,7 @@ struct call_function_data {
 	spinlock_t lock;
 	unsigned int refs;
 	struct rcu_head rcu_head;
-	unsigned long cpumask_bits[];
+	struct cpumask cpumask;
 };
 
 struct call_single_queue {
@@ -111,13 +111,13 @@ void generic_smp_call_function_interrupt(void)
 	list_for_each_entry_rcu(data, &call_function_queue, csd.list) {
 		int refs;
 
-		if (!cpumask_test_cpu(cpu, to_cpumask(data->cpumask_bits)))
+		if (!cpumask_test_cpu(cpu, &data->cpumask))
 			continue;
 
 		data->csd.func(data->csd.info);
 
 		spin_lock(&data->lock);
-		cpumask_clear_cpu(cpu, to_cpumask(data->cpumask_bits));
+		cpumask_clear_cpu(cpu, &data->cpumask);
 		WARN_ON(data->refs == 0);
 		data->refs--;
 		refs = data->refs;
@@ -137,8 +137,10 @@ void generic_smp_call_function_interrupt(void)
 			 */
 			smp_wmb();
 			data->csd.flags &= ~CSD_FLAG_WAIT;
-		}
-		if (data->csd.flags & CSD_FLAG_ALLOC)
+		} else if (data->csd.flags & CSD_FLAG_LOCK) {
+			smp_wmb();
+			data->csd.flags &= ~CSD_FLAG_LOCK;
+		} else if (data->csd.flags & CSD_FLAG_ALLOC)
 			call_rcu(&data->rcu_head, rcu_free_call_data);
 	}
 	rcu_read_unlock();
@@ -302,6 +304,8 @@ void __smp_call_function_single(int cpu, struct call_single_data *data)
 	arch_send_call_function_ipi(*(maskp))
 #endif
 
+static DEFINE_PER_CPU(struct call_function_data, cfd_data);
+
 /**
  * smp_call_function_many(): Run a function on a set of other CPUs.
  * @mask: The set of cpus to run on (only runs on online subset).
@@ -323,14 +327,14 @@ void smp_call_function_many(const struct cpumask *mask,
 {
 	struct call_function_data *data;
 	unsigned long flags;
-	int cpu, next_cpu;
+	int cpu, next_cpu, me = smp_processor_id();
 
 	/* Can deadlock when called with interrupts disabled */
 	WARN_ON(irqs_disabled());
 
 	/* So, what's a CPU they want?  Ignoring this one. */
 	cpu = cpumask_first_and(mask, cpu_online_mask);
-	if (cpu == smp_processor_id())
+	if (cpu == me)
 		cpu = cpumask_next_and(cpu, mask, cpu_online_mask);
 	/* No online cpus?  We're done. */
 	if (cpu >= nr_cpu_ids)
@@ -338,7 +342,7 @@ void smp_call_function_many(const struct cpumask *mask,
 
 	/* Do we have another CPU which isn't us? */
 	next_cpu = cpumask_next_and(cpu, mask, cpu_online_mask);
-	if (next_cpu == smp_processor_id())
+	if (next_cpu == me)
 		next_cpu = cpumask_next_and(next_cpu, mask, cpu_online_mask);
 
 	/* Fastpath: do that cpu by itself. */
@@ -347,27 +351,24 @@ void smp_call_function_many(const struct cpumask *mask,
 		return;
 	}
 
-	data = kmalloc(sizeof(*data) + cpumask_size(), GFP_ATOMIC);
-	if (unlikely(!data)) {
-		/* Slow path. */
-		for_each_online_cpu(cpu) {
-			if (cpu == smp_processor_id())
-				continue;
-			if (cpumask_test_cpu(cpu, mask))
-				smp_call_function_single(cpu, func, info, wait);
-		}
-		return;
+	data = kmalloc(sizeof(*data), GFP_ATOMIC);
+	if (data)
+		data->csd.flags = CSD_FLAG_ALLOC;
+	else {
+		data = &per_cpu(cfd_data, me);
+		while (data->csd.flags & CSD_FLAG_LOCK)
+			cpu_relax();
+		data->csd.flags = CSD_FLAG_LOCK;
 	}
 
 	spin_lock_init(&data->lock);
-	data->csd.flags = CSD_FLAG_ALLOC;
 	if (wait)
 		data->csd.flags |= CSD_FLAG_WAIT;
 	data->csd.func = func;
 	data->csd.info = info;
-	cpumask_and(to_cpumask(data->cpumask_bits), mask, cpu_online_mask);
-	cpumask_clear_cpu(smp_processor_id(), to_cpumask(data->cpumask_bits));
-	data->refs = cpumask_weight(to_cpumask(data->cpumask_bits));
+	cpumask_and(&data->cpumask, mask, cpu_online_mask);
+	cpumask_clear_cpu(smp_processor_id(), &data->cpumask);
+	data->refs = cpumask_weight(&data->cpumask);
 
 	spin_lock_irqsave(&call_function_lock, flags);
 	list_add_tail_rcu(&data->csd.list, &call_function_queue);
@@ -379,7 +380,7 @@ void smp_call_function_many(const struct cpumask *mask,
 	smp_mb();
 
 	/* Send a message to all CPUs in the map */
-	arch_send_call_function_ipi_mask(to_cpumask(data->cpumask_bits));
+	arch_send_call_function_ipi_mask(&data->cpumask);
 
 	/* optionally wait for the CPUs to complete */
 	if (wait)


^ permalink raw reply related	[flat|nested] 359+ messages in thread

* Re: [patch] rt: res_counter fix, v2
  2009-02-12 11:28           ` Ingo Molnar
@ 2009-02-12 12:35             ` KAMEZAWA Hiroyuki
  2009-02-12 16:58             ` Balbir Singh
  1 sibling, 0 replies; 359+ messages in thread
From: KAMEZAWA Hiroyuki @ 2009-02-12 12:35 UTC (permalink / raw)
  To: Ingo Molnar
  Cc: Frederic Weisbecker, Peter Zijlstra, Thomas Gleixner, LKML,
	rt-users, Steven Rostedt, Peter Zijlstra, Carsten Emde,
	Clark Williams, balbir

On Thu, 12 Feb 2009 12:28:54 +0100
Ingo Molnar <mingo@elte.hu> wrote:

> 
> * KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> wrote:
> 
> > On Thu, 12 Feb 2009 11:21:13 +0100
> > Ingo Molnar <mingo@elte.hu> wrote:
> > 
> > > 
> > > * Ingo Molnar <mingo@elte.hu> wrote:
> > > 
> > > > Frederic, could you try the patch below?
> > > 
> > > Please try v2 below - it might even build ;-)
> > > 
> > > 	Ingo
> > > 
> > > ------------------->
> > > Subject: rt: res_counter fix
> > > From: Ingo Molnar <mingo@elte.hu>
> > > Date: Thu Feb 12 11:11:47 CET 2009
> > > 
> > > Frederic Weisbecker reported this warning:
> > > 
> > > [   45.228562] BUG: sleeping function called from invalid context at kernel/rtmutex.c:683
> > > [   45.228571] in_atomic(): 0, irqs_disabled(): 1, pid: 4290, name: ntpdate
> > > [   45.228576] INFO: lockdep is turned off.
> > > [   45.228580] irq event stamp: 0
> > > [   45.228583] hardirqs last  enabled at (0): [<(null)>] (null)
> > > [   45.228589] hardirqs last disabled at (0): [<ffffffff8025449d>] copy_process+0x68d/0x1500
> > > [   45.228602] softirqs last  enabled at (0): [<ffffffff8025449d>] copy_process+0x68d/0x1500
> > > [   45.228609] softirqs last disabled at (0): [<(null)>] (null)
> > > [   45.228617] Pid: 4290, comm: ntpdate Tainted: G        W  2.6.29-rc4-rt1-tip #1
> > > [   45.228622] Call Trace:
> > > [   45.228632]  [<ffffffff8027dfb0>] ? print_irqtrace_events+0xd0/0xe0
> > > [   45.228639]  [<ffffffff8024cd73>] __might_sleep+0x113/0x130
> > > [   45.228646]  [<ffffffff8077c811>] rt_spin_lock+0xa1/0xb0
> > > [   45.228653]  [<ffffffff80296a3d>] res_counter_charge+0x5d/0x130
> > > [   45.228660]  [<ffffffff802fb67f>] __mem_cgroup_try_charge+0x7f/0x180
> > > [   45.228667]  [<ffffffff802fc407>] mem_cgroup_charge_common+0x57/0x90
> > > [   45.228674]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
> > > [   45.228680]  [<ffffffff802fc49d>] mem_cgroup_newpage_charge+0x5d/0x60
> > > [   45.228688]  [<ffffffff802d94ce>] __do_fault+0x29e/0x4c0
> > > [   45.228694]  [<ffffffff8077c843>] ? rt_spin_unlock+0x23/0x80
> > > [   45.228700]  [<ffffffff802db8b5>] handle_mm_fault+0x205/0x890
> > > [   45.228707]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
> > > [   45.228714]  [<ffffffff8023495e>] do_page_fault+0x11e/0x2a0
> > > [   45.228720]  [<ffffffff8077e5a5>] page_fault+0x25/0x30
> > > [   45.228727]  [<ffffffff8043e1ed>] ? __clear_user+0x3d/0x70
> > > [   45.228733]  [<ffffffff8043e1d1>] ? __clear_user+0x21/0x70
> > > 
> > > The reason is the raw IRQ flag use of kernel/res_counter.c.
> > > 
> > > The irq flags tricks there seem a bit pointless: it cannot
> > > protect the c->parent linkage because local_irq_save() is
> > > only per CPU.
> > > 
> > > So replace it with _nort(). This code needs a second look.
> > > 
> > I'm sorry for no knowledge about RT. Could you teach me what
> > local_irq_save_nort() does ?
> > 
> > Hmm, how about just replacaing _irq() with preempt_disable()/enable() ?
> > xxx_nort() is better ?
> > 
> > AFAIK, these will not be called from irq context. (Added Balbir to CC:)
> 
> _nort() will just turn them into NOPs in essence.
> 
> The question is, are these local IRQ flags manipulations really needed
> in this code, and if yes, why?
> 
>From my point of view, No. But original design of res_coutner used irqsave/restore().
The author may think of use this function from irq-context.

But now, it seems it's better to remove them, Hmm.

Thanks,
-Kame


^ permalink raw reply	[flat|nested] 359+ messages in thread

* Re: [patch] generic-ipi: remove kmalloc, cleanup
  2009-02-12 12:09               ` Peter Zijlstra
@ 2009-02-12 12:36                 ` Peter Zijlstra
  2009-02-12 15:43                 ` Steven Rostedt
  2009-02-13 21:16                 ` Rusty Russell
  2 siblings, 0 replies; 359+ messages in thread
From: Peter Zijlstra @ 2009-02-12 12:36 UTC (permalink / raw)
  To: Ingo Molnar
  Cc: Frederic Weisbecker, Thomas Gleixner, LKML, rt-users,
	Steven Rostedt, Carsten Emde, Clark Williams, rusty

On Thu, 2009-02-12 at 13:09 +0100, Peter Zijlstra wrote:


> @@ -137,8 +137,10 @@ void generic_smp_call_function_interrupt(void)
>  			 */
>  			smp_wmb();
>  			data->csd.flags &= ~CSD_FLAG_WAIT;
> -		}
> -		if (data->csd.flags & CSD_FLAG_ALLOC)
> +		} else if (data->csd.flags & CSD_FLAG_LOCK) {
> +			smp_wmb();
> +			data->csd.flags &= ~CSD_FLAG_LOCK;
> +		} else if (data->csd.flags & CSD_FLAG_ALLOC)
>  			call_rcu(&data->rcu_head, rcu_free_call_data);
>  	}
>  	rcu_read_unlock();

Hmm, I think this bit ought to go in rcu_free_call_data(), otherwise we
can have that same race again..

I'd better put a comment in on why we use RCU here.

^ permalink raw reply	[flat|nested] 359+ messages in thread

* Re: [patch] rt: res_counter fix, v2
  2009-02-12 10:21       ` [patch] rt: res_counter fix, v2 Ingo Molnar
  2009-02-12 10:46         ` KAMEZAWA Hiroyuki
@ 2009-02-12 14:28         ` Frederic Weisbecker
  2009-02-12 14:41           ` Peter Zijlstra
  1 sibling, 1 reply; 359+ messages in thread
From: Frederic Weisbecker @ 2009-02-12 14:28 UTC (permalink / raw)
  To: Ingo Molnar
  Cc: Peter Zijlstra, Thomas Gleixner, LKML, rt-users, Steven Rostedt,
	Peter Zijlstra, Carsten Emde, Clark Williams

On Thu, Feb 12, 2009 at 11:21:13AM +0100, Ingo Molnar wrote:
> 
> * Ingo Molnar <mingo@elte.hu> wrote:
> 
> > Frederic, could you try the patch below?
> 
> Please try v2 below - it might even build ;-)
> 
> 	Ingo


Ok, I tested it through 3 bootups and it did not triggered.
But it's absolutely not a guarantee, as I said, I tried to reproduce it
with several bootups yesterday and I couln't see it again.

But by reading the warning and your patch, yes it is supposed to solve it :)

BTW, a small thing:
 
> [   45.228589] hardirqs last disabled at (0): [<ffffffff8025449d>] copy_process+0x68d/0x1500
> [   45.228602] softirqs last  enabled at (0): [<ffffffff8025449d>] copy_process+0x68d/0x1500


The reason for which I wanted to send an irqsoff trace is that the above lines are false.

addr2line -e vmlinux ffffffff8025449d
/home/me/linux/rt/linux-2.6.29-rc4/kernel/fork.c:1107  (before your patch)

Which is this area in copy_process:

#ifdef CONFIG_NUMA
	p->mempolicy = mpol_dup(p->mempolicy);
 	if (IS_ERR(p->mempolicy)) {
 		retval = PTR_ERR(p->mempolicy);
 		p->mempolicy = NULL;
 		goto bad_fork_cleanup_cgroup;
 	}
	mpol_fix_fork_child_flag(p); // <-- 1107
#endif

Nothing here disables irq.
That's why I wanted to provide an irqsoff trace. But, heh I only had to read
res_counter_charge() :-)

Anyway, there is a problem with these hardirqs/softirqs last disabled...


> [   45.228609] softirqs last disabled at (0): [<(null)>] (null)
> [   45.228617] Pid: 4290, comm: ntpdate Tainted: G        W  2.6.29-rc4-rt1-tip #1
> [   45.228622] Call Trace:
> [   45.228632]  [<ffffffff8027dfb0>] ? print_irqtrace_events+0xd0/0xe0
> [   45.228639]  [<ffffffff8024cd73>] __might_sleep+0x113/0x130
> [   45.228646]  [<ffffffff8077c811>] rt_spin_lock+0xa1/0xb0
> [   45.228653]  [<ffffffff80296a3d>] res_counter_charge+0x5d/0x130
> [   45.228660]  [<ffffffff802fb67f>] __mem_cgroup_try_charge+0x7f/0x180
> [   45.228667]  [<ffffffff802fc407>] mem_cgroup_charge_common+0x57/0x90
> [   45.228674]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
> [   45.228680]  [<ffffffff802fc49d>] mem_cgroup_newpage_charge+0x5d/0x60
> [   45.228688]  [<ffffffff802d94ce>] __do_fault+0x29e/0x4c0
> [   45.228694]  [<ffffffff8077c843>] ? rt_spin_unlock+0x23/0x80
> [   45.228700]  [<ffffffff802db8b5>] handle_mm_fault+0x205/0x890
> [   45.228707]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
> [   45.228714]  [<ffffffff8023495e>] do_page_fault+0x11e/0x2a0
> [   45.228720]  [<ffffffff8077e5a5>] page_fault+0x25/0x30
> [   45.228727]  [<ffffffff8043e1ed>] ? __clear_user+0x3d/0x70
> [   45.228733]  [<ffffffff8043e1d1>] ? __clear_user+0x21/0x70
> 
> The reason is the raw IRQ flag use of kernel/res_counter.c.
> 
> The irq flags tricks there seem a bit pointless: it cannot
> protect the c->parent linkage because local_irq_save() is
> only per CPU.
> 
> So replace it with _nort(). This code needs a second look.
> 
> Reported-by: Frederic Weisbecker <fweisbec@gmail.com>
> Signed-off-by: Ingo Molnar <mingo@elte.hu>
> ---
>  kernel/res_counter.c |    9 +++++----
>  1 file changed, 5 insertions(+), 4 deletions(-)
> 
> Index: tip/kernel/res_counter.c
> ===================================================================
> --- tip.orig/kernel/res_counter.c
> +++ tip/kernel/res_counter.c
> @@ -14,6 +14,7 @@
>  #include <linux/res_counter.h>
>  #include <linux/uaccess.h>
>  #include <linux/mm.h>
> +#include <linux/interrupt.h>
>  
>  void res_counter_init(struct res_counter *counter, struct res_counter *parent)
>  {
> @@ -43,7 +44,7 @@ int res_counter_charge(struct res_counte
>  	struct res_counter *c, *u;
>  
>  	*limit_fail_at = NULL;
> -	local_irq_save(flags);
> +	local_irq_save_nort(flags);
>  	for (c = counter; c != NULL; c = c->parent) {
>  		spin_lock(&c->lock);
>  		ret = res_counter_charge_locked(c, val);
> @@ -62,7 +63,7 @@ undo:
>  		spin_unlock(&u->lock);
>  	}
>  done:
> -	local_irq_restore(flags);
> +	local_irq_restore_nort(flags);
>  	return ret;
>  }
>  
> @@ -79,13 +80,13 @@ void res_counter_uncharge(struct res_cou
>  	unsigned long flags;
>  	struct res_counter *c;
>  
> -	local_irq_save(flags);
> +	local_irq_save_nort(flags);
>  	for (c = counter; c != NULL; c = c->parent) {
>  		spin_lock(&c->lock);
>  		res_counter_uncharge_locked(c, val);
>  		spin_unlock(&c->lock);
>  	}
> -	local_irq_restore(flags);
> +	local_irq_restore_nort(flags);
>  }
>  
>  


^ permalink raw reply	[flat|nested] 359+ messages in thread

* Re: [patch] generic-ipi: remove kmalloc, cleanup
  2009-02-12 10:07             ` Ingo Molnar
  (?)
  (?)
@ 2009-02-12 14:34             ` Frederic Weisbecker
  2009-02-12 14:42               ` Peter Zijlstra
  -1 siblings, 1 reply; 359+ messages in thread
From: Frederic Weisbecker @ 2009-02-12 14:34 UTC (permalink / raw)
  To: Ingo Molnar
  Cc: Peter Zijlstra, Thomas Gleixner, LKML, rt-users, Steven Rostedt,
	Carsten Emde, Clark Williams

On Thu, Feb 12, 2009 at 11:07:56AM +0100, Ingo Molnar wrote:
> 
> * Peter Zijlstra <peterz@infradead.org> wrote:
> 
> > On Thu, 2009-02-12 at 09:19 +0100, Ingo Molnar wrote:
> > > * Ingo Molnar <mingo@elte.hu> wrote:
> > > 
> > > > hm, that's a complex one - we do kfree() from IPI context, [...]
> > > 
> > > The patch below might do the trick - it offloads this to a softirq.
> > > Not tested yet.
> > 
> > The simple fix is something like:
> > 
> > ---
> >  kernel/smp.c |    8 ++++++++
> >  1 files changed, 8 insertions(+), 0 deletions(-)
> 
> ok, i made it unconditional (not just a PREEMPT_RT hac) and did the
> cleanup below on top of it.
> 
> I dont think repeat, queued IPIs are all that interesting from a
> performance point of view. If they are, it will all be clearly
> bisectable.
> 
> 	Ingo


Would you prefer I test this one or wait for everybody agree a final version?

 
> --------------->
> Subject: generic-ipi: remove kmalloc, cleanup
> From: Ingo Molnar <mingo@elte.hu>
> 
> Now that we dont use the kmalloc() sequence anymore, remove
> CSD_FLAG_ALLOC and all its dependencies.
> 
> Signed-off-by: Ingo Molnar <mingo@elte.hu>
> ---
>  kernel/smp.c |   86 +++++++++++------------------------------------------------
>  1 file changed, 17 insertions(+), 69 deletions(-)
> 
> Index: tip/kernel/smp.c
> ===================================================================
> --- tip.orig/kernel/smp.c
> +++ tip/kernel/smp.c
> @@ -17,8 +17,7 @@ __cacheline_aligned_in_smp DEFINE_RAW_SP
>  
>  enum {
>  	CSD_FLAG_WAIT		= 0x01,
> -	CSD_FLAG_ALLOC		= 0x02,
> -	CSD_FLAG_LOCK		= 0x04,
> +	CSD_FLAG_LOCK		= 0x02,
>  };
>  
>  struct call_function_data {
> @@ -85,15 +84,6 @@ static void generic_exec_single(int cpu,
>  		csd_flag_wait(data);
>  }
>  
> -static void rcu_free_call_data(struct rcu_head *head)
> -{
> -	struct call_function_data *data;
> -
> -	data = container_of(head, struct call_function_data, rcu_head);
> -
> -	kfree(data);
> -}
> -
>  /*
>   * Invoked by arch to handle an IPI for call function. Must be called with
>   * interrupts disabled.
> @@ -138,8 +128,6 @@ void generic_smp_call_function_interrupt
>  			smp_wmb();
>  			data->csd.flags &= ~CSD_FLAG_WAIT;
>  		}
> -		if (data->csd.flags & CSD_FLAG_ALLOC)
> -			call_rcu(&data->rcu_head, rcu_free_call_data);
>  	}
>  	rcu_read_unlock();
>  
> @@ -190,8 +178,7 @@ void generic_smp_call_function_single_in
>  			} else if (data_flags & CSD_FLAG_LOCK) {
>  				smp_wmb();
>  				data->flags &= ~CSD_FLAG_LOCK;
> -			} else if (data_flags & CSD_FLAG_ALLOC)
> -				kfree(data);
> +			}
>  		}
>  		/*
>  		 * See comment on outer loop
> @@ -236,13 +223,11 @@ int smp_call_function_single(int cpu, vo
>  			/*
>  			 * We are calling a function on a single CPU
>  			 * and we are not going to wait for it to finish.
> -			 * We first try to allocate the data, but if we
> -			 * fail, we fall back to use a per cpu data to pass
> -			 * the information to that CPU. Since all callers
> -			 * of this code will use the same data, we must
> -			 * synchronize the callers to prevent a new caller
> -			 * from corrupting the data before the callee
> -			 * can access it.
> +			 * We use a per cpu data to pass the information to
> +			 * that CPU. Since all callers of this code will use
> +			 * the same data, we must synchronize the callers to
> +			 * prevent a new caller from corrupting the data before
> +			 * the callee can access it.
>  			 *
>  			 * The CSD_FLAG_LOCK is used to let us know when
>  			 * the IPI handler is done with the data.
> @@ -252,15 +237,10 @@ int smp_call_function_single(int cpu, vo
>  			 * will make sure the callee is done with the
>  			 * data before a new caller will use it.
>  			 */
> -			data = NULL;
> -			if (data)
> -				data->flags = CSD_FLAG_ALLOC;
> -			else {
> -				data = &per_cpu(csd_data, me);
> -				while (data->flags & CSD_FLAG_LOCK)
> -					cpu_relax();
> -				data->flags = CSD_FLAG_LOCK;
> -			}
> +			data = &per_cpu(csd_data, me);
> +			while (data->flags & CSD_FLAG_LOCK)
> +				cpu_relax();
> +			data->flags = CSD_FLAG_LOCK;
>  		} else {
>  			data = &d;
>  			data->flags = CSD_FLAG_WAIT;
> @@ -321,8 +301,6 @@ void smp_call_function_many(const struct
>  			    void (*func)(void *), void *info,
>  			    bool wait)
>  {
> -	struct call_function_data *data;
> -	unsigned long flags;
>  	int cpu, next_cpu;
>  
>  	/* Can deadlock when called with interrupts disabled */
> @@ -347,43 +325,13 @@ void smp_call_function_many(const struct
>  		return;
>  	}
>  
> -	data = NULL;
> -	if (unlikely(!data)) {
> -		/* Slow path. */
> -		for_each_online_cpu(cpu) {
> -			if (cpu == smp_processor_id())
> -				continue;
> -			if (cpumask_test_cpu(cpu, mask))
> -				smp_call_function_single(cpu, func, info, wait);
> -		}
> -		return;
> +	/* Slow path. */
> +	for_each_online_cpu(cpu) {
> +		if (cpu == smp_processor_id())
> +			continue;
> +		if (cpumask_test_cpu(cpu, mask))
> +			smp_call_function_single(cpu, func, info, wait);
>  	}
> -
> -	spin_lock_init(&data->lock);
> -	data->csd.flags = CSD_FLAG_ALLOC;
> -	if (wait)
> -		data->csd.flags |= CSD_FLAG_WAIT;
> -	data->csd.func = func;
> -	data->csd.info = info;
> -	cpumask_and(to_cpumask(data->cpumask_bits), mask, cpu_online_mask);
> -	cpumask_clear_cpu(smp_processor_id(), to_cpumask(data->cpumask_bits));
> -	data->refs = cpumask_weight(to_cpumask(data->cpumask_bits));
> -
> -	spin_lock_irqsave(&call_function_lock, flags);
> -	list_add_tail_rcu(&data->csd.list, &call_function_queue);
> -	spin_unlock_irqrestore(&call_function_lock, flags);
> -
> -	/*
> -	 * Make the list addition visible before sending the ipi.
> -	 */
> -	smp_mb();
> -
> -	/* Send a message to all CPUs in the map */
> -	arch_send_call_function_ipi_mask(to_cpumask(data->cpumask_bits));
> -
> -	/* optionally wait for the CPUs to complete */
> -	if (wait)
> -		csd_flag_wait(&data->csd);
>  }
>  EXPORT_SYMBOL(smp_call_function_many);
>  


^ permalink raw reply	[flat|nested] 359+ messages in thread

* Re: [patch] rt: res_counter fix, v2
  2009-02-12 14:28         ` Frederic Weisbecker
@ 2009-02-12 14:41           ` Peter Zijlstra
  2009-02-12 14:46             ` Ingo Molnar
  0 siblings, 1 reply; 359+ messages in thread
From: Peter Zijlstra @ 2009-02-12 14:41 UTC (permalink / raw)
  To: Frederic Weisbecker
  Cc: Ingo Molnar, Thomas Gleixner, LKML, rt-users, Steven Rostedt,
	Carsten Emde, Clark Williams

On Thu, 2009-02-12 at 15:28 +0100, Frederic Weisbecker wrote:
> > [   45.228589] hardirqs last disabled at (0): [<ffffffff8025449d>] copy_process+0x68d/0x1500
> > [   45.228602] softirqs last  enabled at (0): [<ffffffff8025449d>] copy_process+0x68d/0x1500
> 
> 
> The reason for which I wanted to send an irqsoff trace is that the above lines are false.

copy_process() has:

#endif
	p->hardirq_enable_ip = 0;
	p->hardirq_enable_event = 0;
	p->hardirq_disable_ip = _THIS_IP_;
	p->hardirq_disable_event = 0;
	p->softirqs_enabled = 1;
	p->softirq_enable_ip = _THIS_IP_;
	p->softirq_enable_event = 0;
	p->softirq_disable_ip = 0;
	p->softirq_disable_event = 0;
	p->hardirq_context = 0;
	p->softirq_context = 0;
#endif

the sequence count of 0 basically tells you it hasn't been set yet.


^ permalink raw reply	[flat|nested] 359+ messages in thread

* Re: [patch] generic-ipi: remove kmalloc, cleanup
  2009-02-12 14:34             ` Frederic Weisbecker
@ 2009-02-12 14:42               ` Peter Zijlstra
  0 siblings, 0 replies; 359+ messages in thread
From: Peter Zijlstra @ 2009-02-12 14:42 UTC (permalink / raw)
  To: Frederic Weisbecker
  Cc: Ingo Molnar, Thomas Gleixner, LKML, rt-users, Steven Rostedt,
	Carsten Emde, Clark Williams

On Thu, 2009-02-12 at 15:34 +0100, Frederic Weisbecker wrote:
> 
> Would you prefer I test this one or wait for everybody agree a final
> version?

It'll work, but its not mergable upstream like this, it greatly
pessimizes the smp_function_call() performance.


^ permalink raw reply	[flat|nested] 359+ messages in thread

* Re: [patch] rt: res_counter fix, v2
  2009-02-12 14:41           ` Peter Zijlstra
@ 2009-02-12 14:46             ` Ingo Molnar
  2009-02-12 14:50               ` Frederic Weisbecker
  2009-02-12 14:51               ` Peter Zijlstra
  0 siblings, 2 replies; 359+ messages in thread
From: Ingo Molnar @ 2009-02-12 14:46 UTC (permalink / raw)
  To: Peter Zijlstra
  Cc: Frederic Weisbecker, Thomas Gleixner, LKML, rt-users,
	Steven Rostedt, Carsten Emde, Clark Williams


* Peter Zijlstra <a.p.zijlstra@chello.nl> wrote:

> On Thu, 2009-02-12 at 15:28 +0100, Frederic Weisbecker wrote:
> > > [   45.228589] hardirqs last disabled at (0): [<ffffffff8025449d>] copy_process+0x68d/0x1500
> > > [   45.228602] softirqs last  enabled at (0): [<ffffffff8025449d>] copy_process+0x68d/0x1500
> > 
> > 
> > The reason for which I wanted to send an irqsoff trace is that the above lines are false.
> 
> copy_process() has:
> 
> #endif
> 	p->hardirq_enable_ip = 0;
> 	p->hardirq_enable_event = 0;
> 	p->hardirq_disable_ip = _THIS_IP_;
> 	p->hardirq_disable_event = 0;
> 	p->softirqs_enabled = 1;
> 	p->softirq_enable_ip = _THIS_IP_;
> 	p->softirq_enable_event = 0;
> 	p->softirq_disable_ip = 0;
> 	p->softirq_disable_event = 0;
> 	p->hardirq_context = 0;
> 	p->softirq_context = 0;
> #endif
> 
> the sequence count of 0 basically tells you it hasn't been set yet.

maybe we should initialize it to -1 to make this more apparent?

	Ingo

^ permalink raw reply	[flat|nested] 359+ messages in thread

* Re: [patch] rt: res_counter fix, v2
  2009-02-12 14:46             ` Ingo Molnar
@ 2009-02-12 14:50               ` Frederic Weisbecker
  2009-02-12 14:58                 ` Peter Zijlstra
  2009-02-12 14:51               ` Peter Zijlstra
  1 sibling, 1 reply; 359+ messages in thread
From: Frederic Weisbecker @ 2009-02-12 14:50 UTC (permalink / raw)
  To: Ingo Molnar
  Cc: Peter Zijlstra, Thomas Gleixner, LKML, rt-users, Steven Rostedt,
	Carsten Emde, Clark Williams

On Thu, Feb 12, 2009 at 03:46:24PM +0100, Ingo Molnar wrote:
> 
> * Peter Zijlstra <a.p.zijlstra@chello.nl> wrote:
> 
> > On Thu, 2009-02-12 at 15:28 +0100, Frederic Weisbecker wrote:
> > > > [   45.228589] hardirqs last disabled at (0): [<ffffffff8025449d>] copy_process+0x68d/0x1500
> > > > [   45.228602] softirqs last  enabled at (0): [<ffffffff8025449d>] copy_process+0x68d/0x1500
> > > 
> > > 
> > > The reason for which I wanted to send an irqsoff trace is that the above lines are false.
> > 
> > copy_process() has:
> > 
> > #endif
> > 	p->hardirq_enable_ip = 0;
> > 	p->hardirq_enable_event = 0;
> > 	p->hardirq_disable_ip = _THIS_IP_;
> > 	p->hardirq_disable_event = 0;
> > 	p->softirqs_enabled = 1;
> > 	p->softirq_enable_ip = _THIS_IP_;
> > 	p->softirq_enable_event = 0;
> > 	p->softirq_disable_ip = 0;
> > 	p->softirq_disable_event = 0;
> > 	p->hardirq_context = 0;
> > 	p->softirq_context = 0;
> > #endif
> > 
> > the sequence count of 0 basically tells you it hasn't been set yet.


Oh I see now, thanks Peter.

 
> maybe we should initialize it to -1 to make this more apparent?


Or why not set p->{hard,soft}irq_disable_ip = NULL ? (or 0, I don't know its type).


> 	Ingo


^ permalink raw reply	[flat|nested] 359+ messages in thread

* Re: [patch] rt: res_counter fix, v2
  2009-02-12 14:46             ` Ingo Molnar
  2009-02-12 14:50               ` Frederic Weisbecker
@ 2009-02-12 14:51               ` Peter Zijlstra
  1 sibling, 0 replies; 359+ messages in thread
From: Peter Zijlstra @ 2009-02-12 14:51 UTC (permalink / raw)
  To: Ingo Molnar
  Cc: Frederic Weisbecker, Thomas Gleixner, LKML, rt-users,
	Steven Rostedt, Carsten Emde, Clark Williams

On Thu, 2009-02-12 at 15:46 +0100, Ingo Molnar wrote:
> * Peter Zijlstra <a.p.zijlstra@chello.nl> wrote:
> 
> > On Thu, 2009-02-12 at 15:28 +0100, Frederic Weisbecker wrote:
> > > > [   45.228589] hardirqs last disabled at (0): [<ffffffff8025449d>] copy_process+0x68d/0x1500
> > > > [   45.228602] softirqs last  enabled at (0): [<ffffffff8025449d>] copy_process+0x68d/0x1500
> > > 
> > > 
> > > The reason for which I wanted to send an irqsoff trace is that the above lines are false.
> > 
> > copy_process() has:
> > 
> > #endif
> > 	p->hardirq_enable_ip = 0;
> > 	p->hardirq_enable_event = 0;
> > 	p->hardirq_disable_ip = _THIS_IP_;
> > 	p->hardirq_disable_event = 0;
> > 	p->softirqs_enabled = 1;
> > 	p->softirq_enable_ip = _THIS_IP_;
> > 	p->softirq_enable_event = 0;
> > 	p->softirq_disable_ip = 0;
> > 	p->softirq_disable_event = 0;
> > 	p->hardirq_context = 0;
> > 	p->softirq_context = 0;
> > #endif
> > 
> > the sequence count of 0 basically tells you it hasn't been set yet.
> 
> maybe we should initialize it to -1 to make this more apparent?

I think the current state makes sense, it reflects the actual state of
copy_process.


^ permalink raw reply	[flat|nested] 359+ messages in thread

* Re: [patch] rt: res_counter fix, v2
  2009-02-12 14:50               ` Frederic Weisbecker
@ 2009-02-12 14:58                 ` Peter Zijlstra
  0 siblings, 0 replies; 359+ messages in thread
From: Peter Zijlstra @ 2009-02-12 14:58 UTC (permalink / raw)
  To: Frederic Weisbecker
  Cc: Ingo Molnar, Thomas Gleixner, LKML, rt-users, Steven Rostedt,
	Carsten Emde, Clark Williams

On Thu, 2009-02-12 at 15:50 +0100, Frederic Weisbecker wrote:
>  
> > maybe we should initialize it to -1 to make this more apparent?
> 
> 
> Or why not set p->{hard,soft}irq_disable_ip = NULL ? (or 0, I don't know its type).

It is to reflect the actual state at copy_process(), although I think
here's a little buglet:

ifdef CONFIG_TRACE_IRQFLAGS
	p->irq_events = 0;
#ifdef __ARCH_WANT_INTERRUPTS_ON_CTXSW
	p->hardirqs_enabled = 1;
#else
	p->hardirqs_enabled = 0;
#endif
	p->hardirq_enable_ip = 0;
	p->hardirq_enable_event = 0;
	p->hardirq_disable_ip = _THIS_IP_;
	p->hardirq_disable_event = 0;
	p->softirqs_enabled = 1;
	p->softirq_enable_ip = _THIS_IP_;
	p->softirq_enable_event = 0;
	p->softirq_disable_ip = 0;
	p->softirq_disable_event = 0;
	p->hardirq_context = 0;
	p->softirq_context = 0;
#endif

I think the hardirq_enable/disable_ip should also depend on
__ARCH_WANT_INTERRUPTS_ON_CTXSW.




^ permalink raw reply	[flat|nested] 359+ messages in thread

* Re: [patch] generic-ipi: remove kmalloc, cleanup
  2009-02-12 12:09               ` Peter Zijlstra
  2009-02-12 12:36                 ` Peter Zijlstra
@ 2009-02-12 15:43                 ` Steven Rostedt
  2009-02-12 15:57                   ` Peter Zijlstra
  2009-02-13 21:16                 ` Rusty Russell
  2 siblings, 1 reply; 359+ messages in thread
From: Steven Rostedt @ 2009-02-12 15:43 UTC (permalink / raw)
  To: Peter Zijlstra
  Cc: Ingo Molnar, Frederic Weisbecker, Thomas Gleixner, LKML,
	rt-users, Carsten Emde, Clark Williams, rusty


On Thu, 12 Feb 2009, Peter Zijlstra wrote:
> > > ok, i made it unconditional (not just a PREEMPT_RT hac) and did the
> > > cleanup below on top of it.
> > > 
> > > I dont think repeat, queued IPIs are all that interesting from a
> > > performance point of view. If they are, it will all be clearly
> > > bisectable.
> > 
> > Right, except I really don't like the smp_call_function_many() slow path
> > that's now the only path.
> > 
> > Rusty did that I think, but he also had some idea on how to fix it, I
> > think it boiled down to sticking a count in the call data instead of the
> > full cpumask.
> > 
> > So I'd rather we first fix that code, and then remove the kmalloc
> > all-together like you propose here.
> 
> Right, I can't see a way around carrying that cpumask, there's just too
> much that can go wrong without it.
> 
> So it put in unconditionally, how about this?
> 
> 
> --
> Subject: generic-smp: remove single ipi fallback for smp_call_function_many()
> 
> In preparation of removing the kmalloc() calls from the generic-ipi code
> get rid of the single ipi fallback for smp_call_function_many().
> 
> Because we cannot get around carrying the cpumask in the data -- imagine
> 2 such calls with different but overlapping masks -- put in a full mask.
> 
> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
> ---
>  kernel/smp.c |   47 ++++++++++++++++++++++++-----------------------
>  1 files changed, 24 insertions(+), 23 deletions(-)
> 
> diff --git a/kernel/smp.c b/kernel/smp.c
> index bbedbb7..e6658e5 100644
> --- a/kernel/smp.c
> +++ b/kernel/smp.c
> @@ -26,7 +26,7 @@ struct call_function_data {
>  	spinlock_t lock;
>  	unsigned int refs;
>  	struct rcu_head rcu_head;
> -	unsigned long cpumask_bits[];
> +	struct cpumask cpumask;
>  };
>  
>  struct call_single_queue {
> @@ -111,13 +111,13 @@ void generic_smp_call_function_interrupt(void)
>  	list_for_each_entry_rcu(data, &call_function_queue, csd.list) {
>  		int refs;
>  
> -		if (!cpumask_test_cpu(cpu, to_cpumask(data->cpumask_bits)))
> +		if (!cpumask_test_cpu(cpu, &data->cpumask))
>  			continue;
>  
>  		data->csd.func(data->csd.info);
>  
>  		spin_lock(&data->lock);
> -		cpumask_clear_cpu(cpu, to_cpumask(data->cpumask_bits));
> +		cpumask_clear_cpu(cpu, &data->cpumask);
>  		WARN_ON(data->refs == 0);
>  		data->refs--;
>  		refs = data->refs;
> @@ -137,8 +137,10 @@ void generic_smp_call_function_interrupt(void)
>  			 */
>  			smp_wmb();
>  			data->csd.flags &= ~CSD_FLAG_WAIT;
> -		}
> -		if (data->csd.flags & CSD_FLAG_ALLOC)
> +		} else if (data->csd.flags & CSD_FLAG_LOCK) {
> +			smp_wmb();
> +			data->csd.flags &= ~CSD_FLAG_LOCK;
> +		} else if (data->csd.flags & CSD_FLAG_ALLOC)
>  			call_rcu(&data->rcu_head, rcu_free_call_data);
>  	}
>  	rcu_read_unlock();
> @@ -302,6 +304,8 @@ void __smp_call_function_single(int cpu, struct call_single_data *data)
>  	arch_send_call_function_ipi(*(maskp))
>  #endif
>  
> +static DEFINE_PER_CPU(struct call_function_data, cfd_data);
> +
>  /**
>   * smp_call_function_many(): Run a function on a set of other CPUs.
>   * @mask: The set of cpus to run on (only runs on online subset).
> @@ -323,14 +327,14 @@ void smp_call_function_many(const struct cpumask *mask,
>  {
>  	struct call_function_data *data;
>  	unsigned long flags;
> -	int cpu, next_cpu;
> +	int cpu, next_cpu, me = smp_processor_id();
>  
>  	/* Can deadlock when called with interrupts disabled */
>  	WARN_ON(irqs_disabled());
>  
>  	/* So, what's a CPU they want?  Ignoring this one. */
>  	cpu = cpumask_first_and(mask, cpu_online_mask);
> -	if (cpu == smp_processor_id())
> +	if (cpu == me)
>  		cpu = cpumask_next_and(cpu, mask, cpu_online_mask);
>  	/* No online cpus?  We're done. */
>  	if (cpu >= nr_cpu_ids)
> @@ -338,7 +342,7 @@ void smp_call_function_many(const struct cpumask *mask,
>  
>  	/* Do we have another CPU which isn't us? */
>  	next_cpu = cpumask_next_and(cpu, mask, cpu_online_mask);
> -	if (next_cpu == smp_processor_id())
> +	if (next_cpu == me)
>  		next_cpu = cpumask_next_and(next_cpu, mask, cpu_online_mask);
>  
>  	/* Fastpath: do that cpu by itself. */
> @@ -347,27 +351,24 @@ void smp_call_function_many(const struct cpumask *mask,
>  		return;
>  	}
>  
> -	data = kmalloc(sizeof(*data) + cpumask_size(), GFP_ATOMIC);
> -	if (unlikely(!data)) {
> -		/* Slow path. */
> -		for_each_online_cpu(cpu) {
> -			if (cpu == smp_processor_id())
> -				continue;
> -			if (cpumask_test_cpu(cpu, mask))
> -				smp_call_function_single(cpu, func, info, wait);
> -		}
> -		return;
> +	data = kmalloc(sizeof(*data), GFP_ATOMIC);
> +	if (data)
> +		data->csd.flags = CSD_FLAG_ALLOC;
> +	else {
> +		data = &per_cpu(cfd_data, me);
> +		while (data->csd.flags & CSD_FLAG_LOCK)
> +			cpu_relax();
> +		data->csd.flags = CSD_FLAG_LOCK;

Wont the first CPU that runs the callback unlock this? And then we run the
risk of two back to back callers on the same CPU, having the second
caller possibly corrupt the first.

-- Steve

>  	}
>  
>  	spin_lock_init(&data->lock);
> -	data->csd.flags = CSD_FLAG_ALLOC;
>  	if (wait)
>  		data->csd.flags |= CSD_FLAG_WAIT;
>  	data->csd.func = func;
>  	data->csd.info = info;
> -	cpumask_and(to_cpumask(data->cpumask_bits), mask, cpu_online_mask);
> -	cpumask_clear_cpu(smp_processor_id(), to_cpumask(data->cpumask_bits));
> -	data->refs = cpumask_weight(to_cpumask(data->cpumask_bits));
> +	cpumask_and(&data->cpumask, mask, cpu_online_mask);
> +	cpumask_clear_cpu(smp_processor_id(), &data->cpumask);
> +	data->refs = cpumask_weight(&data->cpumask);
>  
>  	spin_lock_irqsave(&call_function_lock, flags);
>  	list_add_tail_rcu(&data->csd.list, &call_function_queue);
> @@ -379,7 +380,7 @@ void smp_call_function_many(const struct cpumask *mask,
>  	smp_mb();
>  
>  	/* Send a message to all CPUs in the map */
> -	arch_send_call_function_ipi_mask(to_cpumask(data->cpumask_bits));
> +	arch_send_call_function_ipi_mask(&data->cpumask);
>  
>  	/* optionally wait for the CPUs to complete */
>  	if (wait)
> 
> 
> 

^ permalink raw reply	[flat|nested] 359+ messages in thread

* Re: [patch] generic-ipi: remove kmalloc, cleanup
  2009-02-12 15:43                 ` Steven Rostedt
@ 2009-02-12 15:57                   ` Peter Zijlstra
  0 siblings, 0 replies; 359+ messages in thread
From: Peter Zijlstra @ 2009-02-12 15:57 UTC (permalink / raw)
  To: Steven Rostedt
  Cc: Ingo Molnar, Frederic Weisbecker, Thomas Gleixner, LKML,
	rt-users, Carsten Emde, Clark Williams, rusty

On Thu, 2009-02-12 at 10:43 -0500, Steven Rostedt wrote:
> > +     data = kmalloc(sizeof(*data), GFP_ATOMIC);
> > +     if (data)
> > +             data->csd.flags = CSD_FLAG_ALLOC;
> > +     else {
> > +             data = &per_cpu(cfd_data, me);
> > +             while (data->csd.flags & CSD_FLAG_LOCK)
> > +                     cpu_relax();
> > +             data->csd.flags = CSD_FLAG_LOCK;
> 
> Wont the first CPU that runs the callback unlock this? And then we run the
> risk of two back to back callers on the same CPU, having the second
> caller possibly corrupt the first.

No, there's a ref count in there that ensures the last one unlocks it.

But that's still not enough, the global queue is RCU protected.

Suppose you have 4 cpus, and use smp_function_call_mask() to 2 others,
now its possible the 4th is also doing global ipis and is traversing the
global queue.

Therefore, if you remove the cfd when its done, it might be the 4th cpu
is in it trying to iterate to the next entry --> BANG.

The solution used is RCU freeing cfd's. This also means we have to RCU
free the LOCK flag, sadly an RCU grace period is waaaay too long to spin
wait on.

Hence this whole solution is not quite feasible.

There's various alternative solutions, but I'm not quite sure which
makes most sense.

The one I'm currently pondering is using the global queue only for
all-but-self cfd's, this matches the all-but-self ipi APIC case.

For smaller masks we could queue a csd per queue and send single ipis.




^ permalink raw reply	[flat|nested] 359+ messages in thread

* Re: [patch] irq threading: fix PF_HARDIRQ definition
  2009-02-12  8:42     ` Ingo Molnar
@ 2009-02-12 16:50         ` Clark Williams
  0 siblings, 0 replies; 359+ messages in thread
From: Clark Williams @ 2009-02-12 16:50 UTC (permalink / raw)
  To: Ingo Molnar
  Cc: Thomas Gleixner, LKML, rt-users, Steven Rostedt, Peter Zijlstra,
	Carsten Emde

[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: Type: text/plain; charset=US-ASCII, Size: 890 bytes --]

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

On Thu, 12 Feb 2009 09:42:22 +0100
Ingo Molnar <mingo@elte.hu> wrote:
> 
> Anyway, my fix should solve this. Do you still see the lockup under X? (make
> sure you also have the IPI fix applied, see the patch in this same thread.)

That did it (the IPI patch and the redefinition). I'm up with:

$ uname -a
Linux torg 2.6.29-rc4-rt1-tip #51 SMP PREEMPT RT Thu Feb 12 09:40:06
CST 2009 x86_64 x86_64 x86_64 GNU/Linux

Thanks, I'll do some latency testing on my test boxes next...

Clark
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.10 (GNU/Linux)

iEYEARECAAYFAkmUU2gACgkQHyuj/+TTEp3c7wCgjnQuYgoLmGOmq26a2T198eh/
KdgAnjmX+cqwxYAtzaHeMH6/nO6MNuUH
=NHh/
-----END PGP SIGNATURE-----
ÿôèº{.nÇ+‰·Ÿ®‰­†+%ŠËÿ±éݶ\x17¥Šwÿº{.nÇ+‰·¥Š{±þG«éÿŠ{ayº\x1dʇڙë,j\a­¢f£¢·hšïêÿ‘êçz_è®\x03(­éšŽŠÝ¢j"ú\x1a¶^[m§ÿÿ¾\a«þG«éÿ¢¸?™¨è­Ú&£ø§~á¶iO•æ¬z·švØ^\x14\x04\x1a¶^[m§ÿÿÃ\fÿ¶ìÿ¢¸?–I¥

^ permalink raw reply	[flat|nested] 359+ messages in thread

* Re: [patch] irq threading: fix PF_HARDIRQ definition
@ 2009-02-12 16:50         ` Clark Williams
  0 siblings, 0 replies; 359+ messages in thread
From: Clark Williams @ 2009-02-12 16:50 UTC (permalink / raw)
  To: Ingo Molnar
  Cc: Thomas Gleixner, LKML, rt-users, Steven Rostedt, Peter Zijlstra,
	Carsten Emde

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

On Thu, 12 Feb 2009 09:42:22 +0100
Ingo Molnar <mingo@elte.hu> wrote:
> 
> Anyway, my fix should solve this. Do you still see the lockup under X? (make
> sure you also have the IPI fix applied, see the patch in this same thread.)

That did it (the IPI patch and the redefinition). I'm up with:

$ uname -a
Linux torg 2.6.29-rc4-rt1-tip #51 SMP PREEMPT RT Thu Feb 12 09:40:06
CST 2009 x86_64 x86_64 x86_64 GNU/Linux

Thanks, I'll do some latency testing on my test boxes next...

Clark
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.10 (GNU/Linux)

iEYEARECAAYFAkmUU2gACgkQHyuj/+TTEp3c7wCgjnQuYgoLmGOmq26a2T198eh/
KdgAnjmX+cqwxYAtzaHeMH6/nO6MNuUH
=NHh/
-----END PGP SIGNATURE-----

^ permalink raw reply	[flat|nested] 359+ messages in thread

* Re: [patch] rt: res_counter fix, v2
  2009-02-12 11:28           ` Ingo Molnar
  2009-02-12 12:35             ` KAMEZAWA Hiroyuki
@ 2009-02-12 16:58             ` Balbir Singh
  2009-02-12 17:29               ` Peter Zijlstra
  2009-02-12 23:56               ` KAMEZAWA Hiroyuki
  1 sibling, 2 replies; 359+ messages in thread
From: Balbir Singh @ 2009-02-12 16:58 UTC (permalink / raw)
  To: Ingo Molnar
  Cc: KAMEZAWA Hiroyuki, Frederic Weisbecker, Peter Zijlstra,
	Thomas Gleixner, LKML, rt-users, Steven Rostedt, Peter Zijlstra,
	Carsten Emde, Clark Williams

* Ingo Molnar <mingo@elte.hu> [2009-02-12 12:28:54]:

> 
> * KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> wrote:
> 
> > On Thu, 12 Feb 2009 11:21:13 +0100
> > Ingo Molnar <mingo@elte.hu> wrote:
> > 
> > > 
> > > * Ingo Molnar <mingo@elte.hu> wrote:
> > > 
> > > > Frederic, could you try the patch below?
> > > 
> > > Please try v2 below - it might even build ;-)
> > > 
> > > 	Ingo
> > > 
> > > ------------------->
> > > Subject: rt: res_counter fix
> > > From: Ingo Molnar <mingo@elte.hu>
> > > Date: Thu Feb 12 11:11:47 CET 2009
> > > 
> > > Frederic Weisbecker reported this warning:
> > > 
> > > [   45.228562] BUG: sleeping function called from invalid context at kernel/rtmutex.c:683
> > > [   45.228571] in_atomic(): 0, irqs_disabled(): 1, pid: 4290, name: ntpdate
> > > [   45.228576] INFO: lockdep is turned off.
> > > [   45.228580] irq event stamp: 0
> > > [   45.228583] hardirqs last  enabled at (0): [<(null)>] (null)
> > > [   45.228589] hardirqs last disabled at (0): [<ffffffff8025449d>] copy_process+0x68d/0x1500
> > > [   45.228602] softirqs last  enabled at (0): [<ffffffff8025449d>] copy_process+0x68d/0x1500
> > > [   45.228609] softirqs last disabled at (0): [<(null)>] (null)
> > > [   45.228617] Pid: 4290, comm: ntpdate Tainted: G        W  2.6.29-rc4-rt1-tip #1
> > > [   45.228622] Call Trace:
> > > [   45.228632]  [<ffffffff8027dfb0>] ? print_irqtrace_events+0xd0/0xe0
> > > [   45.228639]  [<ffffffff8024cd73>] __might_sleep+0x113/0x130
> > > [   45.228646]  [<ffffffff8077c811>] rt_spin_lock+0xa1/0xb0
> > > [   45.228653]  [<ffffffff80296a3d>] res_counter_charge+0x5d/0x130
> > > [   45.228660]  [<ffffffff802fb67f>] __mem_cgroup_try_charge+0x7f/0x180
> > > [   45.228667]  [<ffffffff802fc407>] mem_cgroup_charge_common+0x57/0x90
> > > [   45.228674]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
> > > [   45.228680]  [<ffffffff802fc49d>] mem_cgroup_newpage_charge+0x5d/0x60
> > > [   45.228688]  [<ffffffff802d94ce>] __do_fault+0x29e/0x4c0
> > > [   45.228694]  [<ffffffff8077c843>] ? rt_spin_unlock+0x23/0x80
> > > [   45.228700]  [<ffffffff802db8b5>] handle_mm_fault+0x205/0x890
> > > [   45.228707]  [<ffffffff80212096>] ? ftrace_call+0x5/0x2b
> > > [   45.228714]  [<ffffffff8023495e>] do_page_fault+0x11e/0x2a0
> > > [   45.228720]  [<ffffffff8077e5a5>] page_fault+0x25/0x30
> > > [   45.228727]  [<ffffffff8043e1ed>] ? __clear_user+0x3d/0x70
> > > [   45.228733]  [<ffffffff8043e1d1>] ? __clear_user+0x21/0x70
> > > 
> > > The reason is the raw IRQ flag use of kernel/res_counter.c.
> > > 
> > > The irq flags tricks there seem a bit pointless: it cannot
> > > protect the c->parent linkage because local_irq_save() is
> > > only per CPU.
> > > 
> > > So replace it with _nort(). This code needs a second look.
> > > 
> > I'm sorry for no knowledge about RT. Could you teach me what
> > local_irq_save_nort() does ?
> > 
> > Hmm, how about just replacaing _irq() with preempt_disable()/enable() ?
> > xxx_nort() is better ?
> > 
> > AFAIK, these will not be called from irq context. (Added Balbir to CC:)
> 
> _nort() will just turn them into NOPs in essence.
> 
> The question is, are these local IRQ flags manipulations really needed
> in this code, and if yes, why?

We needed the local IRQ flags, since these counters are updated from
page fault context and from reclaim context with lru_lock held with
IRQ's disabled. I've been thinking about replacing the spin lock with
seq lock, but have not gotten to it yet.

-- 
	Balbir

^ permalink raw reply	[flat|nested] 359+ messages in thread

* Re: [patch] rt: res_counter fix, v2
  2009-02-12 16:58             ` Balbir Singh
@ 2009-02-12 17:29               ` Peter Zijlstra
  2009-02-12 23:56               ` KAMEZAWA Hiroyuki
  1 sibling, 0 replies; 359+ messages in thread
From: Peter Zijlstra @ 2009-02-12 17:29 UTC (permalink / raw)
  To: balbir
  Cc: Ingo Molnar, KAMEZAWA Hiroyuki, Frederic Weisbecker,
	Thomas Gleixner, LKML, rt-users, Steven Rostedt, Carsten Emde,
	Clark Williams

On Thu, 2009-02-12 at 22:28 +0530, Balbir Singh wrote:

> > _nort() will just turn them into NOPs in essence.
> > 
> > The question is, are these local IRQ flags manipulations really needed
> > in this code, and if yes, why?
> 
> We needed the local IRQ flags, since these counters are updated from
> page fault context and from reclaim context with lru_lock held with
> IRQ's disabled. I've been thinking about replacing the spin lock with
> seq lock, but have not gotten to it yet.

Ah, in that case we can get away with _nort I think, as both those
contexts are preemptable on -rt.


^ permalink raw reply	[flat|nested] 359+ messages in thread

* [Announce] 2.6.29-rc4-rt2
  2009-02-11 22:43 [Announce] 2.6.29-rc4-rt1 Thomas Gleixner
  2009-02-12  0:50 ` Frederic Weisbecker
  2009-02-12  2:55 ` [Announce] 2.6.29-rc4-rt1 Clark Williams
@ 2009-02-12 22:56 ` Thomas Gleixner
  2009-02-13  0:48   ` Frederic Weisbecker
                     ` (6 more replies)
  2 siblings, 7 replies; 359+ messages in thread
From: Thomas Gleixner @ 2009-02-12 22:56 UTC (permalink / raw)
  To: Thomas Gleixner
  Cc: LKML, rt-users, Ingo Molnar, Steven Rostedt, Peter Zijlstra,
	Carsten Emde, Clark Williams

We are pleased to announce the first update to our new preempt-rt
series. It fixes the reported bugs and some more.

Download locations:

   http://rt.et.redhat.com/download/
   http://www.kernel.org/pub/linux/kernel/projects/rt/
 
Information on the RT patch can be found at:

  http://rt.wiki.kernel.org/index.php/Main_Page

to build the 2.6.29-rc4-rt2 tree, the following patches should be
applied:

  http://www.kernel.org/pub/linux/kernel/v2.6/testing/linux-2.6.29-rc4.tar.bz2
  http://www.kernel.org/pub/linux/kernel/projects/rt/patch-2.6.29-rc4-rt2.bz2

The broken out patches are also available at the same download
locations.

Enjoy !

      Thomas, Ingo

^ permalink raw reply	[flat|nested] 359+ messages in thread

* Re: [patch] rt: res_counter fix, v2
  2009-02-12 16:58             ` Balbir Singh
  2009-02-12 17:29               ` Peter Zijlstra
@ 2009-02-12 23:56               ` KAMEZAWA Hiroyuki
  2009-02-13  0:29                 ` KAMEZAWA Hiroyuki
  1 sibling, 1 reply; 359+ messages in thread
From: KAMEZAWA Hiroyuki @ 2009-02-12 23:56 UTC (permalink / raw)
  To: balbir
  Cc: Ingo Molnar, Frederic Weisbecker, Peter Zijlstra,
	Thomas Gleixner, LKML, rt-users, Steven Rostedt, Peter Zijlstra,
	Carsten Emde, Clark Williams

On Thu, 12 Feb 2009 22:28:33 +0530
Balbir Singh <balbir@linux.vnet.ibm.com> wrote:

> * Ingo Molnar <mingo@elte.hu> [2009-02-12 12:28:54]:
> 
> > 
> > * KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> wrote:
> > 
> > > On Thu, 12 Feb 2009 11:21:13 +0100
> > > Ingo Molnar <mingo@elte.hu> wrote:
> > The question is, are these local IRQ flags manipulations really needed
> > in this code, and if yes, why?
> 
> We needed the local IRQ flags, since these counters are updated from
> page fault context and from reclaim context with lru_lock held with
> IRQ's disabled. I've been thinking about replacing the spin lock with
> seq lock, but have not gotten to it yet.
> 
Hmm ?  I can't understand. Why we have to disable IRQ here again ?
And,
  - try_to_unmap() is called in shrink_page_list(),  there, no zone->lru_lock.
  - page fault path doesn't hold zone->lru_lock.

My concern is only shmem. But I think it doesn't call charge() within lock, actually.

Thanks,
-Kame


^ permalink raw reply	[flat|nested] 359+ messages in thread

* Re: [patch] rt: res_counter fix, v2
  2009-02-12 23:56               ` KAMEZAWA Hiroyuki
@ 2009-02-13  0:29                 ` KAMEZAWA Hiroyuki
  0 siblings, 0 replies; 359+ messages in thread
From: KAMEZAWA Hiroyuki @ 2009-02-13  0:29 UTC (permalink / raw)
  To: KAMEZAWA Hiroyuki
  Cc: balbir, Ingo Molnar, Frederic Weisbecker, Peter Zijlstra,
	Thomas Gleixner, LKML, rt-users, Steven Rostedt, Peter Zijlstra,
	Carsten Emde, Clark Williams

On Fri, 13 Feb 2009 08:56:40 +0900
KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> wrote:

> On Thu, 12 Feb 2009 22:28:33 +0530
> Balbir Singh <balbir@linux.vnet.ibm.com> wrote:
> 
> > * Ingo Molnar <mingo@elte.hu> [2009-02-12 12:28:54]:
> > 
> > > 
> > > * KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> wrote:
> > > 
> > > > On Thu, 12 Feb 2009 11:21:13 +0100
> > > > Ingo Molnar <mingo@elte.hu> wrote:
> > > The question is, are these local IRQ flags manipulations really needed
> > > in this code, and if yes, why?
> > 
> > We needed the local IRQ flags, since these counters are updated from
> > page fault context and from reclaim context with lru_lock held with
> > IRQ's disabled. I've been thinking about replacing the spin lock with
> > seq lock, but have not gotten to it yet.
> > 
> Hmm ?  I can't understand. Why we have to disable IRQ here again ?
> And,
>   - try_to_unmap() is called in shrink_page_list(),  there, no zone->lru_lock.
>   - page fault path doesn't hold zone->lru_lock.
> 
> My concern is only shmem. But I think it doesn't call charge() within lock, actually

Clarification :)
  res_counter_charge() is called from
    - page fault 
        => under down_read(mmap_sem), lock_page() may be held.  IRQ=ENABLED)
    - add_to_page_cache
        => under lock_page(), mapping->tree_lock is *not* held, IRQ=DISABLED
    - shmem
        => info->lock is held, we use __GFP_NOWAIT here. IRQ=ENABLED
    - shmem
        => info->lock is *not* held with GFP_KERNEL here, IRQ=ENABLED.
    - migration
        => under lock_page() and mmap_sem, IRQ=ENABLED

  res_counter_uncharge() is called from
    - page_remove_rmap()//(Only when ANON)
         => anon_vma->lock and pte_lock(),lock_page() can be held. IRQ=ENABLED?
    - remove_from_page_cache()
         => lock_page() and mapping->tree_lock is held, IRQ=DISABLED.

Summary:
   "Charge" is considered as heavy operation and the call path is placed where the
    thread can sleep, AMAP.
   "Uncharge" is considered as light operation and call path is under some # of
    spinlocks.


Bye,
-Kame


^ permalink raw reply	[flat|nested] 359+ messages in thread

* Re: [Announce] 2.6.29-rc4-rt2
  2009-02-12 22:56 ` [Announce] 2.6.29-rc4-rt2 Thomas Gleixner
@ 2009-02-13  0:48   ` Frederic Weisbecker
  2009-02-13  2:16     ` Frederic Weisbecker
  2009-02-19 18:44   ` [Announce] 2.6.29-rc4-rt2 Thomas Meyer
                     ` (5 subsequent siblings)
  6 siblings, 1 reply; 359+ messages in thread
From: Frederic Weisbecker @ 2009-02-13  0:48 UTC (permalink / raw)
  To: Thomas Gleixner
  Cc: Thomas Gleixner, LKML, rt-users, Ingo Molnar, Steven Rostedt,
	Peter Zijlstra, Carsten Emde, Clark Williams

On Thu, Feb 12, 2009 at 11:56:38PM +0100, Thomas Gleixner wrote:
> We are pleased to announce the first update to our new preempt-rt
> series. It fixes the reported bugs and some more.
> 
> Download locations:
> 
>    http://rt.et.redhat.com/download/
>    http://www.kernel.org/pub/linux/kernel/projects/rt/
>  
> Information on the RT patch can be found at:
> 
>   http://rt.wiki.kernel.org/index.php/Main_Page
> 
> to build the 2.6.29-rc4-rt2 tree, the following patches should be
> applied:
> 
>   http://www.kernel.org/pub/linux/kernel/v2.6/testing/linux-2.6.29-rc4.tar.bz2
>   http://www.kernel.org/pub/linux/kernel/projects/rt/patch-2.6.29-rc4-rt2.bz2
> 
> The broken out patches are also available at the same download
> locations.
> 
> Enjoy !
> 
>       Thomas, Ingo


Hi,

It fixes the rt-concerned warning I had.
Now, a new little lockdep info, tell me if you need my config, I changed
it a bit:

[    0.012874] INFO: trying to register non-static key.
[    0.012940] the code is fine but needs lockdep annotation.
[    0.013008] turning off the locking correctness validator.
[    0.013847] Pid: 0, comm: swapper Not tainted 2.6.29-rc4-rt2-tip #2
[    0.013917] Call Trace:
[    0.013981]  [<ffffffff80285985>] __lock_acquire+0x1825/0x1b20
[    0.014053]  [<ffffffff802846fb>] ? __lock_acquire+0x59b/0x1b20
[    0.014125]  [<ffffffff80283326>] ? mark_held_locks+0x56/0xa0
[    0.014197]  [<ffffffff80285d1f>] lock_acquire+0x9f/0xe0
[    0.014267]  [<ffffffff80780ea8>] ? rt_spin_lock_slowlock+0x38/0x310
[    0.014342]  [<ffffffff80783211>] __spin_lock_irqsave+0x51/0x70
[    0.014415]  [<ffffffff80780ea8>] ? rt_spin_lock_slowlock+0x38/0x310
[    0.014489]  [<ffffffff80780ea8>] rt_spin_lock_slowlock+0x38/0x310
[    0.014562]  [<ffffffff802836dc>] ? debug_check_no_locks_freed+0x9c/0x160
[    0.014636]  [<ffffffff80781edc>] rt_spin_lock+0x4c/0xa0
[    0.014706]  [<ffffffff80276f51>] compat_down_timeout+0x21/0x60
[    0.014780]  [<ffffffff804910ca>] acpi_os_wait_semaphore+0x4e/0x5d
[    0.014853]  [<ffffffff804aafa9>] acpi_ut_acquire_mutex+0x43/0x87
[    0.014926]  [<ffffffff804a06cd>] acpi_ns_root_initialize+0x28/0x2ab
[    0.014999]  [<ffffffff80449d88>] ? __raw_spin_lock_init+0x38/0x70
[    0.015073]  [<ffffffff80acbd6a>] acpi_initialize_subsystem+0x69/0x91
[    0.015147]  [<ffffffff80acc24a>] acpi_early_init+0x50/0xf5
[    0.015219]  [<ffffffff80aa1ea5>] start_kernel+0x3d2/0x4ca
[    0.015290]  [<ffffffff80aa12b9>] x86_64_start_reservations+0x99/0xb9
[    0.015362]  [<ffffffff80aa13d5>] x86_64_start_kernel+0xfc/0x10b
[    0.015436]  [<ffffffff80aa1140>] ? early_idt_handler+0x0/0x71

Oh and I just tested the tracers.
It seems to run fine for all of them except sysprof.
It passes the self-test but doesn't produce any trace when I manually try.

Not completely sure this is only in -rt so I'm pulling very latest -tip
and will see if I find the same problem there.


^ permalink raw reply	[flat|nested] 359+ messages in thread

* Re: [Announce] 2.6.29-rc4-rt2
  2009-02-13  0:48   ` Frederic Weisbecker
@ 2009-02-13  2:16     ` Frederic Weisbecker
  2009-02-13  3:09       ` Frederic Weisbecker
  0 siblings, 1 reply; 359+ messages in thread
From: Frederic Weisbecker @ 2009-02-13  2:16 UTC (permalink / raw)
  To: Thomas Gleixner
  Cc: Thomas Gleixner, LKML, rt-users, Ingo Molnar, Steven Rostedt,
	Peter Zijlstra, Carsten Emde, Clark Williams

On Fri, Feb 13, 2009 at 01:48:12AM +0100, Frederic Weisbecker wrote:
> On Thu, Feb 12, 2009 at 11:56:38PM +0100, Thomas Gleixner wrote:
> > We are pleased to announce the first update to our new preempt-rt
> > series. It fixes the reported bugs and some more.
> > 
> > Download locations:
> > 
> >    http://rt.et.redhat.com/download/
> >    http://www.kernel.org/pub/linux/kernel/projects/rt/
> >  
> > Information on the RT patch can be found at:
> > 
> >   http://rt.wiki.kernel.org/index.php/Main_Page
> > 
> > to build the 2.6.29-rc4-rt2 tree, the following patches should be
> > applied:
> > 
> >   http://www.kernel.org/pub/linux/kernel/v2.6/testing/linux-2.6.29-rc4.tar.bz2
> >   http://www.kernel.org/pub/linux/kernel/projects/rt/patch-2.6.29-rc4-rt2.bz2
> > 
> > The broken out patches are also available at the same download
> > locations.
> > 
> > Enjoy !
> > 
> >       Thomas, Ingo
> 
> 
> Hi,
> 
> It fixes the rt-concerned warning I had.
> Now, a new little lockdep info, tell me if you need my config, I changed
> it a bit:
> 
> [    0.012874] INFO: trying to register non-static key.
> [    0.012940] the code is fine but needs lockdep annotation.
> [    0.013008] turning off the locking correctness validator.
> [    0.013847] Pid: 0, comm: swapper Not tainted 2.6.29-rc4-rt2-tip #2
> [    0.013917] Call Trace:
> [    0.013981]  [<ffffffff80285985>] __lock_acquire+0x1825/0x1b20
> [    0.014053]  [<ffffffff802846fb>] ? __lock_acquire+0x59b/0x1b20
> [    0.014125]  [<ffffffff80283326>] ? mark_held_locks+0x56/0xa0
> [    0.014197]  [<ffffffff80285d1f>] lock_acquire+0x9f/0xe0
> [    0.014267]  [<ffffffff80780ea8>] ? rt_spin_lock_slowlock+0x38/0x310
> [    0.014342]  [<ffffffff80783211>] __spin_lock_irqsave+0x51/0x70
> [    0.014415]  [<ffffffff80780ea8>] ? rt_spin_lock_slowlock+0x38/0x310
> [    0.014489]  [<ffffffff80780ea8>] rt_spin_lock_slowlock+0x38/0x310
> [    0.014562]  [<ffffffff802836dc>] ? debug_check_no_locks_freed+0x9c/0x160
> [    0.014636]  [<ffffffff80781edc>] rt_spin_lock+0x4c/0xa0
> [    0.014706]  [<ffffffff80276f51>] compat_down_timeout+0x21/0x60
> [    0.014780]  [<ffffffff804910ca>] acpi_os_wait_semaphore+0x4e/0x5d
> [    0.014853]  [<ffffffff804aafa9>] acpi_ut_acquire_mutex+0x43/0x87
> [    0.014926]  [<ffffffff804a06cd>] acpi_ns_root_initialize+0x28/0x2ab
> [    0.014999]  [<ffffffff80449d88>] ? __raw_spin_lock_init+0x38/0x70
> [    0.015073]  [<ffffffff80acbd6a>] acpi_initialize_subsystem+0x69/0x91
> [    0.015147]  [<ffffffff80acc24a>] acpi_early_init+0x50/0xf5
> [    0.015219]  [<ffffffff80aa1ea5>] start_kernel+0x3d2/0x4ca
> [    0.015290]  [<ffffffff80aa12b9>] x86_64_start_reservations+0x99/0xb9
> [    0.015362]  [<ffffffff80aa13d5>] x86_64_start_kernel+0xfc/0x10b
> [    0.015436]  [<ffffffff80aa1140>] ? early_idt_handler+0x0/0x71
> 
> Oh and I just tested the tracers.
> It seems to run fine for all of them except sysprof.
> It passes the self-test but doesn't produce any trace when I manually try.
> 
> Not completely sure this is only in -rt so I'm pulling very latest -tip
> and will see if I find the same problem there.


About sysprof, it's an -rt problem, I don't see it on -tip.
The sysprof hrtimer callback is never called.

I'm digging to see what is happening.


^ permalink raw reply	[flat|nested] 359+ messages in thread

* Re: [Announce] 2.6.29-rc4-rt2
  2009-02-13  2:16     ` Frederic Weisbecker
@ 2009-02-13  3:09       ` Frederic Weisbecker
  2009-02-13  7:26         ` [patch] rt: sysprof hrtimer fix Ingo Molnar
  0 siblings, 1 reply; 359+ messages in thread
From: Frederic Weisbecker @ 2009-02-13  3:09 UTC (permalink / raw)
  To: Thomas Gleixner
  Cc: Thomas Gleixner, LKML, rt-users, Ingo Molnar, Steven Rostedt,
	Peter Zijlstra, Carsten Emde, Clark Williams

On Fri, Feb 13, 2009 at 03:16:26AM +0100, Frederic Weisbecker wrote:
> On Fri, Feb 13, 2009 at 01:48:12AM +0100, Frederic Weisbecker wrote:
> > On Thu, Feb 12, 2009 at 11:56:38PM +0100, Thomas Gleixner wrote:
> > > We are pleased to announce the first update to our new preempt-rt
> > > series. It fixes the reported bugs and some more.
> > > 
> > > Download locations:
> > > 
> > >    http://rt.et.redhat.com/download/
> > >    http://www.kernel.org/pub/linux/kernel/projects/rt/
> > >  
> > > Information on the RT patch can be found at:
> > > 
> > >   http://rt.wiki.kernel.org/index.php/Main_Page
> > > 
> > > to build the 2.6.29-rc4-rt2 tree, the following patches should be
> > > applied:
> > > 
> > >   http://www.kernel.org/pub/linux/kernel/v2.6/testing/linux-2.6.29-rc4.tar.bz2
> > >   http://www.kernel.org/pub/linux/kernel/projects/rt/patch-2.6.29-rc4-rt2.bz2
> > > 
> > > The broken out patches are also available at the same download
> > > locations.
> > > 
> > > Enjoy !
> > > 
> > >       Thomas, Ingo
> > 
> > 
> > Hi,
> > 
> > It fixes the rt-concerned warning I had.
> > Now, a new little lockdep info, tell me if you need my config, I changed
> > it a bit:
> > 
> > [    0.012874] INFO: trying to register non-static key.
> > [    0.012940] the code is fine but needs lockdep annotation.
> > [    0.013008] turning off the locking correctness validator.
> > [    0.013847] Pid: 0, comm: swapper Not tainted 2.6.29-rc4-rt2-tip #2
> > [    0.013917] Call Trace:
> > [    0.013981]  [<ffffffff80285985>] __lock_acquire+0x1825/0x1b20
> > [    0.014053]  [<ffffffff802846fb>] ? __lock_acquire+0x59b/0x1b20
> > [    0.014125]  [<ffffffff80283326>] ? mark_held_locks+0x56/0xa0
> > [    0.014197]  [<ffffffff80285d1f>] lock_acquire+0x9f/0xe0
> > [    0.014267]  [<ffffffff80780ea8>] ? rt_spin_lock_slowlock+0x38/0x310
> > [    0.014342]  [<ffffffff80783211>] __spin_lock_irqsave+0x51/0x70
> > [    0.014415]  [<ffffffff80780ea8>] ? rt_spin_lock_slowlock+0x38/0x310
> > [    0.014489]  [<ffffffff80780ea8>] rt_spin_lock_slowlock+0x38/0x310
> > [    0.014562]  [<ffffffff802836dc>] ? debug_check_no_locks_freed+0x9c/0x160
> > [    0.014636]  [<ffffffff80781edc>] rt_spin_lock+0x4c/0xa0
> > [    0.014706]  [<ffffffff80276f51>] compat_down_timeout+0x21/0x60
> > [    0.014780]  [<ffffffff804910ca>] acpi_os_wait_semaphore+0x4e/0x5d
> > [    0.014853]  [<ffffffff804aafa9>] acpi_ut_acquire_mutex+0x43/0x87
> > [    0.014926]  [<ffffffff804a06cd>] acpi_ns_root_initialize+0x28/0x2ab
> > [    0.014999]  [<ffffffff80449d88>] ? __raw_spin_lock_init+0x38/0x70
> > [    0.015073]  [<ffffffff80acbd6a>] acpi_initialize_subsystem+0x69/0x91
> > [    0.015147]  [<ffffffff80acc24a>] acpi_early_init+0x50/0xf5
> > [    0.015219]  [<ffffffff80aa1ea5>] start_kernel+0x3d2/0x4ca
> > [    0.015290]  [<ffffffff80aa12b9>] x86_64_start_reservations+0x99/0xb9
> > [    0.015362]  [<ffffffff80aa13d5>] x86_64_start_kernel+0xfc/0x10b
> > [    0.015436]  [<ffffffff80aa1140>] ? early_idt_handler+0x0/0x71
> > 
> > Oh and I just tested the tracers.
> > It seems to run fine for all of them except sysprof.
> > It passes the self-test but doesn't produce any trace when I manually try.
> > 
> > Not completely sure this is only in -rt so I'm pulling very latest -tip
> > and will see if I find the same problem there.
> 
> 
> About sysprof, it's an -rt problem, I don't see it on -tip.
> The sysprof hrtimer callback is never called.
> 
> I'm digging to see what is happening.

I didn't put my ftrace_printk at the right place.
It doesn't come from hrtimer.
The problem comes from get_irq_regs() which always returns NULL on the
sysprof hrtimer calback, then the trace is immediately dropped
by sysprof.

That's weird, smp_apic_timer_interrupt() calls set_irq_regs() so
it should find it.

Now I'm preempted by my bed.


^ permalink raw reply	[flat|nested] 359+ messages in thread

* [patch] rt: sysprof hrtimer fix
  2009-02-13  3:09       ` Frederic Weisbecker
@ 2009-02-13  7:26         ` Ingo Molnar
  2009-02-13 12:04           ` Frederic Weisbecker
  0 siblings, 1 reply; 359+ messages in thread
From: Ingo Molnar @ 2009-02-13  7:26 UTC (permalink / raw)
  To: Frederic Weisbecker
  Cc: Thomas Gleixner, Thomas Gleixner, LKML, rt-users, Steven Rostedt,
	Peter Zijlstra, Carsten Emde, Clark Williams


* Frederic Weisbecker <fweisbec@gmail.com> wrote:

> > > It seems to run fine for all of them except sysprof. It passes the self-test 
> > > but doesn't produce any trace when I manually try.
> > > 
> > > Not completely sure this is only in -rt so I'm pulling very latest -tip and 
> > > will see if I find the same problem there.
> > 
> > About sysprof, it's an -rt problem, I don't see it on -tip. The sysprof hrtimer 
> > callback is never called.
> > 
> > I'm digging to see what is happening.
> 
> I didn't put my ftrace_printk at the right place. It doesn't come from hrtimer. 
> The problem comes from get_irq_regs() which always returns NULL on the sysprof 
> hrtimer calback, then the trace is immediately dropped by sysprof.

Ah, that makes sense - under -rt the default hrtimer execution is to
execute in a softirq context. Could you try the patch below please,
does it fix sysprof?

	Ingo

------------------>
Subject: rt: sysprof hrtimer fix
From: Ingo Molnar <mingo@elte.hu>
Date: Fri Feb 13 08:22:14 CET 2009

Frederic Weisbecker noticed that sysprof does not work under
.29-rt2, and tracked it down to a NULL result that get_irq_regs()
gives to the sysprof plugin.

The reason for the NULL is that it executes in the HRTIMER_SOFTIRQ
context, hence it does not interrupt any real context and thus
there's no IRQ registers to take a look at.

Since the sysprof functionality is atomic, the fix is to move the
sysprof hrtimers to hardirq context.

Reported-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 kernel/trace/trace_sysprof.c |    1 +
 1 file changed, 1 insertion(+)

Index: tip/kernel/trace/trace_sysprof.c
===================================================================
--- tip.orig/kernel/trace/trace_sysprof.c
+++ tip/kernel/trace/trace_sysprof.c
@@ -202,6 +202,7 @@ static void start_stack_timer(void *unus
 
 	hrtimer_init(hrtimer, CLOCK_MONOTONIC, HRTIMER_MODE_REL);
 	hrtimer->function = stack_trace_timer_fn;
+	hrtimer->irqsafe = 1;
 
 	hrtimer_start(hrtimer, ns_to_ktime(sample_period), HRTIMER_MODE_REL);
 }

^ permalink raw reply	[flat|nested] 359+ messages in thread

* Re: [patch] rt: sysprof hrtimer fix
  2009-02-13  7:26         ` [patch] rt: sysprof hrtimer fix Ingo Molnar
@ 2009-02-13 12:04           ` Frederic Weisbecker
  2009-02-13 12:49             ` Ingo Molnar
  0 siblings, 1 reply; 359+ messages in thread
From: Frederic Weisbecker @ 2009-02-13 12:04 UTC (permalink / raw)
  To: Ingo Molnar
  Cc: Thomas Gleixner, Thomas Gleixner, LKML, rt-users, Steven Rostedt,
	Peter Zijlstra, Carsten Emde, Clark Williams

On Fri, Feb 13, 2009 at 08:26:01AM +0100, Ingo Molnar wrote:
> 
> * Frederic Weisbecker <fweisbec@gmail.com> wrote:
> 
> > > > It seems to run fine for all of them except sysprof. It passes the self-test 
> > > > but doesn't produce any trace when I manually try.
> > > > 
> > > > Not completely sure this is only in -rt so I'm pulling very latest -tip and 
> > > > will see if I find the same problem there.
> > > 
> > > About sysprof, it's an -rt problem, I don't see it on -tip. The sysprof hrtimer 
> > > callback is never called.
> > > 
> > > I'm digging to see what is happening.
> > 
> > I didn't put my ftrace_printk at the right place. It doesn't come from hrtimer. 
> > The problem comes from get_irq_regs() which always returns NULL on the sysprof 
> > hrtimer calback, then the trace is immediately dropped by sysprof.
> 
> Ah, that makes sense - under -rt the default hrtimer execution is to
> execute in a softirq context. Could you try the patch below please,
> does it fix sysprof?
> 
> 	Ingo

Yes! Thanks :-)

Tested-by: Frederic Weisbecker <fweisbec@gmail.com>

So, just a thing.
-rt make the hrtimer's timers running on softirq context because the hrtimer_interrupt
doesn't run as a threaded interrupt, and then it is not preemptible right?

In that case, sysprof will continue to run in hardirq context, as before, and
it will considerably increase the latency. And that matters here.
So I think it is important to put it on the reminder:

-------------------->
Subject: [PATCH] rt: add sysprof to the latency overhead reminder
From: Frederic Weisbecker <fweisbec@gmail.com>

Since sysprof uses the hrtimer on hardirq with interrupts disabled, it
adds a latency overhead.

Add it to the latency reminder.

Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
---
--- linux-2.6.29-rc4/init/~main.c	2009-02-13 12:51:54.000000000 +0100
+++ linux-2.6.29-rc4/init/main.c	2009-02-13 12:55:40.000000000 +0100
@@ -904,7 +904,7 @@ static int __init kernel_init(void * unu
 	WARN_ON(irqs_disabled());
 #endif
 
-#define DEBUG_COUNT (defined(CONFIG_DEBUG_RT_MUTEXES) + defined(CONFIG_IRQSOFF_TRACER) + defined(CONFIG_PREEMPT_TRACER) + defined(CONFIG_STACK_TRACER) + defined(CONFIG_WAKEUP_LATENCY_HIST) + defined(CONFIG_DEBUG_SLAB) + defined(CONFIG_DEBUG_PAGEALLOC) + defined(CONFIG_LOCKDEP) + (defined(CONFIG_FTRACE) - defined(CONFIG_FTRACE_MCOUNT_RECORD)))
+#define DEBUG_COUNT (defined(CONFIG_DEBUG_RT_MUTEXES) + defined(CONFIG_IRQSOFF_TRACER) + defined(CONFIG_PREEMPT_TRACER) + defined(CONFIG_STACK_TRACER) + defined(CONFIG_WAKEUP_LATENCY_HIST) + defined(CONFIG_DEBUG_SLAB) + defined(CONFIG_DEBUG_PAGEALLOC) + defined(CONFIG_LOCKDEP) + defined(CONFIG_SYSPROF_TRACER) + (defined(CONFIG_FTRACE) - defined(CONFIG_FTRACE_MCOUNT_RECORD)))
 
 #if DEBUG_COUNT > 0
 	printk(KERN_ERR "*****************************************************************************\n");
@@ -924,6 +924,9 @@ static int __init kernel_init(void * unu
 #ifdef CONFIG_PREEMPT_TRACER
 	printk(KERN_ERR "*        CONFIG_PREEMPT_TRACER                                              *\n");
 #endif
+#ifdef CONFIG_SYSPROF_TRACER
+	printk(KERN_ERR "*        CONFIG_SYSPROF_TRACER                                              *\n");
+#endif
 #ifdef CONFIG_FTRACE
 	printk(KERN_ERR "*        CONFIG_FTRACE                                                      *\n");
 #endif





^ permalink raw reply	[flat|nested] 359+ messages in thread

* Re: [patch] rt: sysprof hrtimer fix
  2009-02-13 12:04           ` Frederic Weisbecker
@ 2009-02-13 12:49             ` Ingo Molnar
  2009-02-13 20:03               ` Frederic Weisbecker
  0 siblings, 1 reply; 359+ messages in thread
From: Ingo Molnar @ 2009-02-13 12:49 UTC (permalink / raw)
  To: Frederic Weisbecker
  Cc: Thomas Gleixner, Thomas Gleixner, LKML, rt-users, Steven Rostedt,
	Peter Zijlstra, Carsten Emde, Clark Williams


* Frederic Weisbecker <fweisbec@gmail.com> wrote:

> So, just a thing.
> -rt make the hrtimer's timers running on softirq context because the hrtimer_interrupt
> doesn't run as a threaded interrupt, and then it is not preemptible right?
> 
> In that case, sysprof will continue to run in hardirq context, as before, and
> it will considerably increase the latency. And that matters here.
> So I think it is important to put it on the reminder:

hm, not sure. Do you know it numerically how much worst-case overhead it
induces?

	Ingo

^ permalink raw reply	[flat|nested] 359+ messages in thread

* Re: [patch] rt: sysprof hrtimer fix
  2009-02-13 12:49             ` Ingo Molnar
@ 2009-02-13 20:03               ` Frederic Weisbecker
  0 siblings, 0 replies; 359+ messages in thread
From: Frederic Weisbecker @ 2009-02-13 20:03 UTC (permalink / raw)
  To: Ingo Molnar
  Cc: Thomas Gleixner, Thomas Gleixner, LKML, rt-users, Steven Rostedt,
	Peter Zijlstra, Carsten Emde, Clark Williams

On Fri, Feb 13, 2009 at 01:49:28PM +0100, Ingo Molnar wrote:
> 
> * Frederic Weisbecker <fweisbec@gmail.com> wrote:
> 
> > So, just a thing.
> > -rt make the hrtimer's timers running on softirq context because the hrtimer_interrupt
> > doesn't run as a threaded interrupt, and then it is not preemptible right?
> > 
> > In that case, sysprof will continue to run in hardirq context, as before, and
> > it will considerably increase the latency. And that matters here.
> > So I think it is important to put it on the reminder:
> 
> hm, not sure. Do you know it numerically how much worst-case overhead it
> induces?
> 
> 	Ingo

Not at all.
But when I find some time, I will compare some rt average tests with and without sysprof.


^ permalink raw reply	[flat|nested] 359+ messages in thread

* Re: [patch] generic-ipi: remove kmalloc, cleanup
  2009-02-12 12:09               ` Peter Zijlstra
  2009-02-12 12:36                 ` Peter Zijlstra
  2009-02-12 15:43                 ` Steven Rostedt
@ 2009-02-13 21:16                 ` Rusty Russell
  2009-02-13 23:48                   ` Peter Zijlstra
  2 siblings, 1 reply; 359+ messages in thread
From: Rusty Russell @ 2009-02-13 21:16 UTC (permalink / raw)
  To: Peter Zijlstra
  Cc: Ingo Molnar, Frederic Weisbecker, Thomas Gleixner, LKML,
	rt-users, Steven Rostedt, Carsten Emde, Clark Williams

On Thursday 12 February 2009 22:39:14 Peter Zijlstra wrote:
> So it put in unconditionally, how about this?
> 
> 
> --
> Subject: generic-smp: remove single ipi fallback for smp_call_function_many()
> 
> In preparation of removing the kmalloc() calls from the generic-ipi code
> get rid of the single ipi fallback for smp_call_function_many().
> 
> Because we cannot get around carrying the cpumask in the data -- imagine
> 2 such calls with different but overlapping masks -- put in a full mask.

OK, if you really want this, please just change it to:
	unsigned long cpumask_bits[BITS_TO_LONGS(CONFIG_NR_CPUS)];

The 'struct cpumask' will be undefined soon when CONFIG_CPUMASK_OFFSTACK=y,
which will prevent assignment and declaration on stack.

I'd be fascinated to see perf numbers once you kill the kmalloc.  Because
this patch will add num_possible_cpus * NR_CPUS/8 bytes to the kernel which
is something we're trying to avoid unless necessary.

Thanks,
Rusty.

^ permalink raw reply	[flat|nested] 359+ messages in thread

* Re: [patch] generic-ipi: remove kmalloc, cleanup
  2009-02-13 21:16                 ` Rusty Russell
@ 2009-02-13 23:48                   ` Peter Zijlstra
  2009-02-16  7:16                     ` Rusty Russell
  0 siblings, 1 reply; 359+ messages in thread
From: Peter Zijlstra @ 2009-02-13 23:48 UTC (permalink / raw)
  To: Rusty Russell
  Cc: Ingo Molnar, Frederic Weisbecker, Thomas Gleixner, LKML,
	rt-users, Steven Rostedt, Carsten Emde, Clark Williams

On Sat, 2009-02-14 at 07:46 +1030, Rusty Russell wrote:
> On Thursday 12 February 2009 22:39:14 Peter Zijlstra wrote:
> > So it put in unconditionally, how about this?
> > 
> > 
> > --
> > Subject: generic-smp: remove single ipi fallback for smp_call_function_many()
> > 
> > In preparation of removing the kmalloc() calls from the generic-ipi code
> > get rid of the single ipi fallback for smp_call_function_many().
> > 
> > Because we cannot get around carrying the cpumask in the data -- imagine
> > 2 such calls with different but overlapping masks -- put in a full mask.
> 
> OK, if you really want this, please just change it to:
> 	unsigned long cpumask_bits[BITS_TO_LONGS(CONFIG_NR_CPUS)];
> 
> The 'struct cpumask' will be undefined soon when CONFIG_CPUMASK_OFFSTACK=y,
> which will prevent assignment and declaration on stack.
> 
> I'd be fascinated to see perf numbers once you kill the kmalloc.  Because
> this patch will add num_possible_cpus * NR_CPUS/8 bytes to the kernel which
> is something we're trying to avoid unless necessary.

You're free to make it a pointer and do node affine allocations from an
init section of choice and add a hotplug handler.

But I'm not quite sure how perf is affected by size overhead on
ridiculous configs.


^ permalink raw reply	[flat|nested] 359+ messages in thread

* Re: [patch] generic-ipi: remove kmalloc, cleanup
  2009-02-13 23:48                   ` Peter Zijlstra
@ 2009-02-16  7:16                     ` Rusty Russell
  2009-02-16  9:57                       ` Peter Zijlstra
  0 siblings, 1 reply; 359+ messages in thread
From: Rusty Russell @ 2009-02-16  7:16 UTC (permalink / raw)
  To: Peter Zijlstra
  Cc: Ingo Molnar, Frederic Weisbecker, Thomas Gleixner, LKML,
	rt-users, Steven Rostedt, Carsten Emde, Clark Williams

On Saturday 14 February 2009 10:18:05 Peter Zijlstra wrote:
> On Sat, 2009-02-14 at 07:46 +1030, Rusty Russell wrote:
> > I'd be fascinated to see perf numbers once you kill the kmalloc.  Because
> > this patch will add num_possible_cpus * NR_CPUS/8 bytes to the kernel which
> > is something we're trying to avoid unless necessary.
> 
> You're free to make it a pointer and do node affine allocations from an
> init section of choice and add a hotplug handler.
> 
> But I'm not quite sure how perf is affected by size overhead on
> ridiculous configs.

No, I meant "can you actually measure the perf win of this patch?".  If you
did so, I missed it?

But if this patch is worthwhile, the right way to do this is make it a
cpumask_var_t, and do the alloc_cpumask_var_node() in that init routine.

Thanks,
Rusty.

^ permalink raw reply	[flat|nested] 359+ messages in thread

* Re: [patch] generic-ipi: remove kmalloc, cleanup
  2009-02-16  7:16                     ` Rusty Russell
@ 2009-02-16  9:57                       ` Peter Zijlstra
  0 siblings, 0 replies; 359+ messages in thread
From: Peter Zijlstra @ 2009-02-16  9:57 UTC (permalink / raw)
  To: Rusty Russell
  Cc: Ingo Molnar, Frederic Weisbecker, Thomas Gleixner, LKML,
	rt-users, Steven Rostedt, Carsten Emde, Clark Williams

On Mon, 2009-02-16 at 17:46 +1030, Rusty Russell wrote:
> On Saturday 14 February 2009 10:18:05 Peter Zijlstra wrote:
> > On Sat, 2009-02-14 at 07:46 +1030, Rusty Russell wrote:
> > > I'd be fascinated to see perf numbers once you kill the kmalloc.  Because
> > > this patch will add num_possible_cpus * NR_CPUS/8 bytes to the kernel which
> > > is something we're trying to avoid unless necessary.
> > 
> > You're free to make it a pointer and do node affine allocations from an
> > init section of choice and add a hotplug handler.
> > 
> > But I'm not quite sure how perf is affected by size overhead on
> > ridiculous configs.
> 
> No, I meant "can you actually measure the perf win of this patch?".  If you
> did so, I missed it?

Over what, the always single-ipi case, or the kmalloc case?

The thing is, we're removing that kmalloc because its somewhat of a wart
on the whole thing.

> But if this patch is worthwhile, the right way to do this is make it a
> cpumask_var_t, and do the alloc_cpumask_var_node() in that init routine.

Right, and installing a hotplug handler and ... *sigh*


^ permalink raw reply	[flat|nested] 359+ messages in thread

* Re: [Announce] 2.6.29-rc4-rt2
  2009-02-12 22:56 ` [Announce] 2.6.29-rc4-rt2 Thomas Gleixner
  2009-02-13  0:48   ` Frederic Weisbecker
@ 2009-02-19 18:44   ` Thomas Meyer
  2009-02-19 20:50     ` Peter Zijlstra
  2009-02-20  6:32   ` Thomas Meyer
                     ` (4 subsequent siblings)
  6 siblings, 1 reply; 359+ messages in thread
From: Thomas Meyer @ 2009-02-19 18:44 UTC (permalink / raw)
  To: Thomas Gleixner
  Cc: Thomas Gleixner, LKML, rt-users, Ingo Molnar, Steven Rostedt,
	Peter Zijlstra, Carsten Emde, Clark Williams

Am Donnerstag, den 12.02.2009, 23:56 +0100 schrieb Thomas Gleixner:
> We are pleased to announce the first update to our new preempt-rt
> series. It fixes the reported bugs and some more.
> 
> Download locations:
> 
>    http://rt.et.redhat.com/download/
>    http://www.kernel.org/pub/linux/kernel/projects/rt/
>  
> Information on the RT patch can be found at:
> 
>   http://rt.wiki.kernel.org/index.php/Main_Page
> 
> to build the 2.6.29-rc4-rt2 tree, the following patches should be
> applied:
> 
>   http://www.kernel.org/pub/linux/kernel/v2.6/testing/linux-2.6.29-rc4.tar.bz2
>   http://www.kernel.org/pub/linux/kernel/projects/rt/patch-2.6.29-rc4-rt2.bz2
> 
> The broken out patches are also available at the same download
> locations.
> 
> Enjoy !
> 
>       Thomas, Ingo

Hi,

Setting CONFIG_PERF_COUNTERS make my build, hang really early. Likely
before ohci1394_dma=early stuff, because firescope doesn't seem to work.

With attached config the system boots up to the point
after /etc/rc.sysinit (this is a fedora 10 system) activates the swap.
Then all I see from upstart/init is "Message from illegal source". And
the system seems to stop the boot process. Strange, isn't it?
 
So this is what I could capture with attached config, by inserting
"/bin/bash" into /etc/rc.sysinit after swap activation:

[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Linux version 2.6.29-rc4-rt2-tip (thomas@localhost.localdomain) (gcc version 4.3.2 20081105 (Red Hat 4.3.2-7) (GCC) ) #54 SMP PREEMPT RT Thu Feb 19 16:29:15 CET 2009
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   NSC Geode by NSC
[    0.000000]   Cyrix CyrixInstead
[    0.000000]   Centaur CentaurHauls
[    0.000000]   Transmeta GenuineTMx86
[    0.000000]   Transmeta TransmetaCPU
[    0.000000]   UMC UMC UMC UMC
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[    0.000000]  BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000ede00 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 000000007f0c8000 (usable)
[    0.000000]  BIOS-e820: 000000007f0c8000 - 000000007f2c9000 (ACPI NVS)
[    0.000000]  BIOS-e820: 000000007f2c9000 - 000000007feb9000 (ACPI data)
[    0.000000]  BIOS-e820: 000000007feb9000 - 000000007feef000 (ACPI NVS)
[    0.000000]  BIOS-e820: 000000007feef000 - 000000007ff00000 (ACPI data)
[    0.000000]  BIOS-e820: 000000007ff00000 - 0000000080000000 (reserved)
[    0.000000]  BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[    0.000000]  BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[    0.000000]  BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
[    0.000000]  BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
[    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[    0.000000]  BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
[    0.000000] DMI 2.4 present.
[    0.000000] last_pfn = 0x7f0c8 max_arch_pfn = 0x100000
[    0.000000] PAT not supported by CPU.
[    0.000000] kernel direct mapping tables up to 377fe000 @ 7000-c000
[    0.000000] init_ohci1394_dma: initializing OHCI-1394 at 0c:03.0
[    0.000000] init_ohci1394_dma: finished initializing OHCI DMA
[    0.000000] RAMDISK: 7ed76000 - 7f0c775d
[    0.000000] Allocated new RAMDISK: 00dd0000 - 0112175d
[    0.000000] Move RAMDISK from 000000007ed76000 - 000000007f0c775c to 00dd0000 - 0112175c
[    0.000000] ACPI: RSDP 000FE020, 0024 (r2 APPLE )
[    0.000000] ACPI: XSDT 7FEFD120, 0074 (r1 APPLE   Apple00       55       1000013)
[    0.000000] ACPI: FACP 7FEFB000, 00F4 (r3 APPLE   Apple00       55 Loki       5F)
[    0.000000] FADT: X_PM1a_EVT_BLK.bit_width (16) does not match PM1_EVT_LEN (4)
[    0.000000] ACPI: DSDT 7FEF0000, 48C0 (r1 APPLE  MacBookP    10001 INTL 20050309)
[    0.000000] ACPI: FACS 7FEBB000, 0040
[    0.000000] ACPI: HPET 7FEFA000, 0038 (r1 APPLE   Apple00        1 Loki       5F)
[    0.000000] ACPI: APIC 7FEF9000, 0068 (r1 APPLE   Apple00        1 Loki       5F)
[    0.000000] ACPI: MCFG 7FEF8000, 003C (r1 APPLE   Apple00        1 Loki       5F)
[    0.000000] ACPI: ASF! 7FEF7000, 009C (r32 APPLE   Apple00        1 Loki       5F)
[    0.000000] ACPI: SBST 7FEF6000, 0030 (r1 APPLE   Apple00        1 Loki       5F)
[    0.000000] ACPI: ECDT 7FEF5000, 0053 (r1 APPLE   Apple00        1 Loki       5F)
[    0.000000] ACPI: SSDT 7FEB6000, 064F (r1 APPLE   SataPri     1000 INTL 20050309)
[    0.000000] ACPI: SSDT 7FEB5000, 069C (r1 APPLE   SataSec     1000 INTL 20050309)
[    0.000000] ACPI: SSDT 7FEEF000, 04DC (r1 APPLE     CpuPm     3000 INTL 20050309)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] 1144MB HIGHMEM available.
[    0.000000] 887MB LOWMEM available.
[    0.000000]   mapped low ram: 0 - 377fe000
[    0.000000]   low ram: 00000000 - 377fe000
[    0.000000]   bootmap 00008000 - 0000ef00
[    0.000000] (9 early reservations) ==> bootmem [0000000000 - 00377fe000]
[    0.000000]   #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
[    0.000000]   #1 [0000001000 - 0000002000]    EX TRAMPOLINE ==> [0000001000 - 0000002000]
[    0.000000]   #2 [0000006000 - 0000007000]       TRAMPOLINE ==> [0000006000 - 0000007000]
[    0.000000]   #3 [0000400000 - 0000dca8a0]    TEXT DATA BSS ==> [0000400000 - 0000dca8a0]
[    0.000000]   #4 [0000dcb000 - 0000dd0000]    INIT_PG_TABLE ==> [0000dcb000 - 0000dd0000]
[    0.000000]   #5 [000009fc00 - 0000100000]    BIOS reserved ==> [000009fc00 - 0000100000]
[    0.000000]   #6 [0000007000 - 0000008000]          PGTABLE ==> [0000007000 - 0000008000]
[    0.000000]   #7 [0000dd0000 - 000112175d]      NEW RAMDISK ==> [0000dd0000 - 000112175d]
[    0.000000]   #8 [0000008000 - 000000f000]          BOOTMAP ==> [0000008000 - 000000f000]
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000000 -> 0x00001000
[    0.000000]   Normal   0x00001000 -> 0x000377fe
[    0.000000]   HighMem  0x000377fe -> 0x0007f0c8
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[2] active PFN ranges
[    0.000000]     0: 0x00000000 -> 0x0000009f
[    0.000000]     0: 0x00000100 -> 0x0007f0c8
[    0.000000] On node 0 totalpages: 520295
[    0.000000] free_area_init_node: node 0, pgdat c0c8fb40, node_mem_map c1122000
[    0.000000]   DMA zone: 52 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 3947 pages, LIFO batch:0
[    0.000000]   Normal zone: 2834 pages used for memmap
[    0.000000]   Normal zone: 220396 pages, LIFO batch:31
[    0.000000]   HighMem zone: 3721 pages used for memmap
[    0.000000]   HighMem zone: 289345 pages, LIFO batch:31
[    0.000000] Using APIC driver default
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[    0.000000] nr_irqs_gsi: 24
[    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000ee000
[    0.000000] PM: Registered nosave memory: 00000000000ee000 - 0000000000100000
[    0.000000] Allocating PCI resources starting at 88000000 (gap: 80000000:60000000)
[    0.000000] NR_CPUS:4 nr_cpumask_bits:4 nr_cpu_ids:2 nr_node_ids:1
[    0.000000] PERCPU: Allocating 32768 bytes of per cpu data
[    0.000000] Real-Time Preemption Support (C) 2004-2007 Ingo Molnar
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 513688
[    0.000000] Kernel command line: ro root=/dev/mapper/luks-sda4 panic=45 nomodeset ohci1394_dma=early vga=0x0f07 initrd=initrd-2.6.29-rc4-rt2-tip.img BOOT_IMAGE=vmlinuz-2.6.29-rc4-rt2-tip 
[    0.000000] Enabling fast FPU save and restore... done.
[    0.000000] Enabling unmasked SIMD FPU exception support... done.
[    0.000000] Initializing CPU#0
[    0.000000] Preemptible RCU implementation.
[    0.000000] NR_IRQS:384
[    0.000000] CPU 0 irqstacks, hard=c0d2d000 soft=c0d29000
[    0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[    0.000000] Extended CMOS year: 2000
[    0.000000] TSC: PIT calibration matches PMTIMER. 1 loops
[    0.000000] Detected 1830.867 MHz processor.
[    0.003333] Console: colour VGA+ 80x60
[    0.003333] console [tty0] enabled
[    0.003333] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.003333] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.003333] Memory: 2039352k/2081568k available (5824k kernel code, 40984k reserved, 3094k data, 420k init, 1172264k highmem)
[    0.003333] virtual kernel memory layout:
[    0.003333]     fixmap  : 0xfff4d000 - 0xfffff000   ( 712 kB)
[    0.003333]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
[    0.003333]     vmalloc : 0xf7ffe000 - 0xff7fe000   ( 120 MB)
[    0.003333]     lowmem  : 0xc0000000 - 0xf77fe000   ( 887 MB)
[    0.003333]       .init : 0xc0cbd000 - 0xc0d26000   ( 420 kB)
[    0.003333]       .data : 0xc09b03b2 - 0xc0cb5bc4   (3094 kB)
[    0.003333]       .text : 0xc0400000 - 0xc09b03b2   (5824 kB)
[    0.003333] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.003333] ------------[ cut here ]------------
[    0.003333] WARNING: at mm/highmem.c:225 kmap_flush_unused+0x2b/0x4b()
[    0.003333] Hardware name: MacBookPro1,1
[    0.003333] Modules linked in:
[    0.003333] Pid: 0, comm: swapper Not tainted 2.6.29-rc4-rt2-tip #54
[    0.003333] Call Trace:
[    0.003333]  [<c0451e70>] warn_slowpath+0x8a/0xd3
[    0.003333]  [<c043ee71>] ? kmap+0x6c/0x77
[    0.003333]  [<c04ad7f5>] ? get_page_from_freelist+0x389/0x42b
[    0.003333]  [<c04adb8f>] ? __alloc_pages_internal+0xbf/0x3a6
[    0.003333]  [<c04b9b92>] kmap_flush_unused+0x2b/0x4b
[    0.003333]  [<c043b877>] change_page_attr_set_clr+0xe8/0x2ca
[    0.003333]  [<c09aabd9>] ? rt_spin_lock+0x32/0x79
[    0.003333]  [<c04bbeb3>] ? __pte_alloc_kernel+0x50/0x83
[    0.003333]  [<c043bd16>] _set_memory_uc+0x27/0x3a
[    0.003333]  [<c043ac3d>] ioremap_change_attr+0x24/0x47
[    0.003333]  [<c043ae62>] __ioremap_caller+0x202/0x256
[    0.003333]  [<c0cd0b79>] ? hpet_enable+0x2d/0x26c
[    0.003333]  [<c043afe0>] ioremap_nocache+0x1c/0x2f
[    0.003333]  [<c0cd0b79>] ? hpet_enable+0x2d/0x26c
[    0.003333]  [<c0cd0b79>] hpet_enable+0x2d/0x26c
[    0.003333]  [<c0cc34fb>] hpet_time_init+0x16/0x37
[    0.003333]  [<c0cbd997>] start_kernel+0x289/0x345
[    0.003333]  [<c0cbd093>] __init_begin+0x93/0xac
[    0.003333] ---[ end trace a7919e7f17c0a725 ]---
[    0.003333] hpet clockevent registered
[    0.003333] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[    0.003333] Calibrating delay loop (skipped), value calculated using timer frequency.. 3663.30 BogoMIPS (lpj=6102890)
[    0.003756] Security Framework initialized
[    0.003926] SELinux:  Initializing.
[    0.004114] SELinux:  Starting in permissive mode
[    0.004144] Mount-cache hash table entries: 512
[    0.006815] Initializing cgroup subsys ns
[    0.006985] Initializing cgroup subsys cpuacct
[    0.007155] Initializing cgroup subsys net_cls
[    0.007345] CPU: L1 I cache: 32K, L1 D cache: 32K
[    0.007614] CPU: L2 cache: 2048K
[    0.007780] CPU: Physical Processor ID: 0
[    0.007946] CPU: Processor Core ID: 0
[    0.008112] CPU: CPU feature monitor disabled due to lack of CPUID level 0x5
[    0.008287] Intel machine check architecture supported.
[    0.008458] Intel machine check reporting enabled on CPU#0.
[    0.008638] Checking 'hlt' instruction... OK.
[    0.023772] ACPI: Core revision 20081204
[    0.037149] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.072745] CPU0: Genuine Intel(R) CPU           T2400  @ 1.83GHz stepping 08
[    0.073332] CPU 1 irqstacks, hard=c0d2e000 soft=c0d2a000
[    0.073332] Booting processor 1 APIC 0x1 ip 0x6000
[    0.073332] Initializing CPU#1
[    0.073332] Calibrating delay using timer specific routine.. 3663.33 BogoMIPS (lpj=6102937)
[    0.073332] CPU: L1 I cache: 32K, L1 D cache: 32K
[    0.073332] CPU: L2 cache: 2048K
[    0.073332] CPU: Physical Processor ID: 0
[    0.073332] CPU: Processor Core ID: 1
[    0.073332] CPU: CPU feature monitor disabled due to lack of CPUID level 0x5
[    0.073332] Intel machine check architecture supported.
[    0.073332] Intel machine check reporting enabled on CPU#1.
[    0.163791] CPU1: Genuine Intel(R) CPU           T2400  @ 1.83GHz stepping 08
[    0.165743] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[    0.166729] Brought up 2 CPUs
[    0.166894] Total of 2 processors activated (7326.64 BogoMIPS).
[    0.167117] CPU0 attaching sched-domain:
[    0.167120]  domain 0: span 0-1 level MC
[    0.167123]   groups: 0 1
[    0.167129] CPU1 attaching sched-domain:
[    0.167131]  domain 0: span 0-1 level MC
[    0.167134]   groups: 1 0
[    0.176788] net_namespace: 1108 bytes
[    0.177292] NET: Registered protocol family 16
[    0.177292] ACPI: bus type pci registered
[    0.177292] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[    0.177292] PCI: MCFG area at e0000000 reserved in E820
[    0.177292] PCI: Using MMCONFIG for extended config space
[    0.177292] PCI: Using configuration type 1 for base access
[    0.190078] bio: create slab <bio-0> at 0
[    0.190879] ACPI: EC: EC description table is found, configuring boot EC
[    0.193395] ACPI: EC: non-query interrupt received, switching to interrupt mode
[    0.196875] ACPI: BIOS _OSI(Linux) query ignored
[    0.200196] ACPI: Interpreter enabled
[    0.200366] ACPI: (supports S0 S3 S4 S5)
[    0.200963] ACPI: Using IOAPIC for interrupt routing
[    0.220171] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[    0.220333] ACPI: EC: driver started in interrupt mode
[    0.220531] ACPI: No dock devices found.
[    0.220625] ACPI: PCI Root Bridge [PCI0] (0000:00)
[    0.220843] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    0.220843] pci 0000:00:01.0: PME# disabled
[    0.220843] pci 0000:00:07.0: reg 10 32bit mmio: [0x90404000-0x90404fff]
[    0.220843] pci 0000:00:1b.0: reg 10 64bit mmio: [0x90400000-0x90403fff]
[    0.220843] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.220843] pci 0000:00:1b.0: PME# disabled
[    0.221091] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.221264] pci 0000:00:1c.0: PME# disabled
[    0.221519] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.221694] pci 0000:00:1c.1: PME# disabled
[    0.221948] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[    0.222122] pci 0000:00:1c.2: PME# disabled
[    0.222354] pci 0000:00:1d.0: reg 20 io port: [0x40a0-0x40bf]
[    0.222420] pci 0000:00:1d.1: reg 20 io port: [0x4080-0x409f]
[    0.222486] pci 0000:00:1d.2: reg 20 io port: [0x4060-0x407f]
[    0.222552] pci 0000:00:1d.3: reg 20 io port: [0x4040-0x405f]
[    0.222621] pci 0000:00:1d.7: reg 10 32bit mmio: [0x90405400-0x904057ff]
[    0.222688] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[    0.222863] pci 0000:00:1d.7: PME# disabled
[    0.223206] pci 0000:00:1f.0: quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO
[    0.223524] pci 0000:00:1f.0: quirk: region 0500-053f claimed by ICH6 GPIO
[    0.223700] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0680 (mask 000f)
[    0.223934] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 1640 (mask 000f)
[    0.224167] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 4700 (mask 0003)
[    0.224402] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 4 PIO at 0300 (mask 001f)
[    0.224688] pci 0000:00:1f.1: reg 10 io port: [0x40e8-0x40ef]
[    0.224697] pci 0000:00:1f.1: reg 14 io port: [0x40fc-0x40ff]
[    0.224705] pci 0000:00:1f.1: reg 18 io port: [0x40e0-0x40e7]
[    0.224714] pci 0000:00:1f.1: reg 1c io port: [0x40f8-0x40fb]
[    0.224723] pci 0000:00:1f.1: reg 20 io port: [0x40c0-0x40cf]
[    0.224780] pci 0000:00:1f.2: reg 10 io port: [0x40d8-0x40df]
[    0.224789] pci 0000:00:1f.2: reg 14 io port: [0x40f4-0x40f7]
[    0.224797] pci 0000:00:1f.2: reg 18 io port: [0x40d0-0x40d7]
[    0.224806] pci 0000:00:1f.2: reg 1c io port: [0x40f0-0x40f3]
[    0.224815] pci 0000:00:1f.2: reg 20 io port: [0x4020-0x402f]
[    0.224823] pci 0000:00:1f.2: reg 24 32bit mmio: [0x90405000-0x904053ff]
[    0.224855] pci 0000:00:1f.2: PME# supported from D3hot
[    0.225028] pci 0000:00:1f.2: PME# disabled
[    0.225256] pci 0000:00:1f.3: reg 20 io port: [0xefa0-0xefbf]
[    0.225345] pci 0000:01:00.0: reg 10 32bit mmio: [0x80000000-0x87ffffff]
[    0.225357] pci 0000:01:00.0: reg 14 io port: [0x3000-0x30ff]
[    0.225368] pci 0000:01:00.0: reg 18 32bit mmio: [0x90300000-0x9030ffff]
[    0.225399] pci 0000:01:00.0: reg 30 32bit mmio: [0xfffe0000-0xffffffff]
[    0.225442] pci 0000:01:00.0: supports D1 D2
[    0.225475] pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
[    0.225799] pci 0000:00:01.0: bridge io port: [0x3000-0x3fff]
[    0.225803] pci 0000:00:01.0: bridge 32bit mmio: [0x90300000-0x903fffff]
[    0.225809] pci 0000:00:01.0: bridge 64bit mmio pref: [0x80000000-0x87ffffff]
[    0.225891] pci 0000:02:00.0: reg 10 64bit mmio: [0x90200000-0x90203fff]
[    0.225903] pci 0000:02:00.0: reg 18 io port: [0x2000-0x20ff]
[    0.225939] pci 0000:02:00.0: reg 30 32bit mmio: [0xfffe0000-0xffffffff]
[    0.225996] pci 0000:02:00.0: supports D1 D2
[    0.225998] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.226094] pci 0000:02:00.0: PME# disabled
[    0.226213] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
[    0.226464] pci 0000:00:1c.0: bridge io port: [0x2000-0x2fff]
[    0.226470] pci 0000:00:1c.0: bridge 32bit mmio: [0x90200000-0x902fffff]
[    0.226557] pci 0000:03:00.0: reg 10 64bit mmio: [0x90100000-0x9010ffff]
[    0.226753] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
[    0.226999] pci 0000:00:1c.1: bridge 32bit mmio: [0x90100000-0x901fffff]
[    0.227066] pci 0000:00:1c.2: bridge io port: [0x1000-0x1fff]
[    0.227072] pci 0000:00:1c.2: bridge 32bit mmio: [0x8c100000-0x900fffff]
[    0.227081] pci 0000:00:1c.2: bridge 64bit mmio pref: [0x88000000-0x8bffffff]
[    0.227133] pci 0000:0c:03.0: reg 10 32bit mmio: [0x8c000000-0x8c000fff]
[    0.227197] pci 0000:0c:03.0: supports D1 D2
[    0.227200] pci 0000:0c:03.0: PME# supported from D0 D1 D2 D3hot
[    0.227292] pci 0000:0c:03.0: PME# disabled
[    0.227436] pci 0000:00:1e.0: transparent bridge
[    0.227529] pci 0000:00:1e.0: bridge 32bit mmio: [0x8c000000-0x8c0fffff]
[    0.227566] pci_bus 0000:00: on NUMA node 0
[    0.227575] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.227879] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT]
[    0.227996] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[    0.228111] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
[    0.228223] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
[    0.228349] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
[    0.240585] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[    0.240870] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[    0.241678] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[    0.242559] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[    0.243400] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[    0.244331] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[    0.245260] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[    0.246137] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *11 12 14 15)
[    0.250158] SCSI subsystem initialized
[    0.250158] libata version 3.00 loaded.
[    0.250158] usbcore: registered new interface driver usbfs
[    0.250158] usbcore: registered new interface driver hub
[    0.250158] usbcore: registered new device driver usb
[    0.250158] ACPI: WMI: Mapper loaded
[    0.250158] PCI: Using ACPI for IRQ routing
[    0.260027] NET: Registered protocol family 23
[    0.260149] Bluetooth: Core ver 2.14
[    0.260252] NET: Registered protocol family 31
[    0.260252] Bluetooth: HCI device and connection manager initialized
[    0.260252] Bluetooth: HCI socket layer initialized
[    0.260272] NetLabel: Initializing
[    0.260355] NetLabel:  domain hash size = 128
[    0.260440] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.260544] NetLabel:  unlabeled traffic allowed by default
[    0.263356] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.263629] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[    0.282737] pnp: PnP ACPI init
[    0.282832] ACPI: bus type pnp registered
[    0.285482] pnp 00:08: io resource (0x1640-0x164f) overlaps 0000:00:1c.2 BAR 7 (0x1000-0x1fff), disabling
[    0.293917] pnp: PnP ACPI: found 10 devices
[    0.294004] ACPI: ACPI bus type pnp unregistered
[    0.294102] system 00:01: iomem range 0xe0000000-0xefffffff has been reserved
[    0.294195] system 00:01: iomem range 0xfed14000-0xfed17fff has been reserved
[    0.294289] system 00:01: iomem range 0xfed18000-0xfed18fff has been reserved
[    0.294382] system 00:01: iomem range 0xfed19000-0xfed19fff has been reserved
[    0.294476] system 00:01: iomem range 0xfed1c000-0xfed1ffff has been reserved
[    0.294569] system 00:01: iomem range 0xfed20000-0xfed8ffff has been reserved
[    0.294669] system 00:06: iomem range 0xfed00000-0xfed003ff has been reserved
[    0.294767] system 00:08: ioport range 0x680-0x6ef has been reserved
[    0.294860] system 00:08: ioport range 0x800-0x80f has been reserved
[    0.294952] system 00:08: ioport range 0x810-0x817 has been reserved
[    0.295044] system 00:08: ioport range 0x400-0x47f has been reserved
[    0.295137] system 00:08: ioport range 0x500-0x53f has been reserved
[    0.330478] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[    0.330569] pci 0000:00:01.0:   IO window: 0x3000-0x3fff
[    0.330659] pci 0000:00:01.0:   MEM window: 0x90300000-0x903fffff
[    0.330751] pci 0000:00:01.0:   PREFETCH window: 0x00000080000000-0x00000087ffffff
[    0.330874] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
[    0.330965] pci 0000:00:1c.0:   IO window: 0x2000-0x2fff
[    0.331057] pci 0000:00:1c.0:   MEM window: 0x90200000-0x902fffff
[    0.331150] pci 0000:00:1c.0:   PREFETCH window: 0x00000090500000-0x000000905fffff
[    0.333170] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:03
[    0.333259] pci 0000:00:1c.1:   IO window: disabled
[    0.333383] pci 0000:00:1c.1:   MEM window: 0x90100000-0x901fffff
[    0.333477] pci 0000:00:1c.1:   PREFETCH window: disabled
[    0.333570] pci 0000:00:1c.2: PCI bridge, secondary bus 0000:04
[    0.333662] pci 0000:00:1c.2:   IO window: 0x1000-0x1fff
[    0.333755] pci 0000:00:1c.2:   MEM window: 0x8c100000-0x900fffff
[    0.333848] pci 0000:00:1c.2:   PREFETCH window: 0x00000088000000-0x0000008bffffff
[    0.333975] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:0c
[    0.334066] pci 0000:00:1e.0:   IO window: disabled
[    0.334158] pci 0000:00:1e.0:   MEM window: 0x8c000000-0x8c0fffff
[    0.334251] pci 0000:00:1e.0:   PREFETCH window: disabled
[    0.334355] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.334449] pci 0000:00:01.0: setting latency timer to 64
[    0.334460] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    0.334555] pci 0000:00:1c.0: setting latency timer to 64
[    0.334565] pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[    0.334660] pci 0000:00:1c.1: setting latency timer to 64
[    0.334671] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    0.334765] pci 0000:00:1c.2: setting latency timer to 64
[    0.334861] pci 0000:00:1e.0: power state changed by ACPI to D0
[    0.334955] pci 0000:00:1e.0: setting latency timer to 64
[    0.334961] pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
[    0.334964] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[    0.334967] pci_bus 0000:01: resource 0 io:  [0x3000-0x3fff]
[    0.334970] pci_bus 0000:01: resource 1 mem: [0x90300000-0x903fffff]
[    0.334973] pci_bus 0000:01: resource 2 mem: [0x80000000-0x87ffffff]
[    0.334976] pci_bus 0000:01: resource 3 mem: [0x0-0x0]
[    0.334979] pci_bus 0000:02: resource 0 io:  [0x2000-0x2fff]
[    0.334982] pci_bus 0000:02: resource 1 mem: [0x90200000-0x902fffff]
[    0.334985] pci_bus 0000:02: resource 2 mem: [0x90500000-0x905fffff]
[    0.334988] pci_bus 0000:02: resource 3 mem: [0x0-0x0]
[    0.334991] pci_bus 0000:03: resource 0 mem: [0x0-0x0]
[    0.334993] pci_bus 0000:03: resource 1 mem: [0x90100000-0x901fffff]
[    0.334996] pci_bus 0000:03: resource 2 mem: [0x0-0x0]
[    0.334999] pci_bus 0000:03: resource 3 mem: [0x0-0x0]
[    0.335002] pci_bus 0000:04: resource 0 io:  [0x1000-0x1fff]
[    0.335005] pci_bus 0000:04: resource 1 mem: [0x8c100000-0x900fffff]
[    0.335008] pci_bus 0000:04: resource 2 mem: [0x88000000-0x8bffffff]
[    0.335011] pci_bus 0000:04: resource 3 mem: [0x0-0x0]
[    0.335013] pci_bus 0000:0c: resource 0 mem: [0x0-0x0]
[    0.335016] pci_bus 0000:0c: resource 1 mem: [0x8c000000-0x8c0fffff]
[    0.335019] pci_bus 0000:0c: resource 2 mem: [0x0-0x0]
[    0.335022] pci_bus 0000:0c: resource 3 io:  [0x00-0xffff]
[    0.335025] pci_bus 0000:0c: resource 4 mem: [0x000000-0xffffffff]
[    0.335086] NET: Registered protocol family 2
[    0.393427] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.393929] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.394739] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes)
[    0.396029] TCP: Hash tables configured (established 131072 bind 65536)
[    0.396125] TCP reno registered
[    0.413478] NET: Registered protocol family 1
[    0.413752] checking if image is initramfs... it is
[    0.690538] Freeing initrd memory: 3397k freed
[    0.692982] Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    0.693700] audit: initializing netlink socket (disabled)
[    0.693806] type=2000 audit(1235070753.690:1): initialized
[    0.698609] highmem bounce pool size: 64 pages
[    0.698699] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[    0.703396] VFS: Disk quotas dquot_6.5.2
[    0.703527] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.704047] NTFS driver 2.1.29 [Flags: R/O].
[    0.704175] fuse init (API version 7.11)
[    0.704404] JFS: nTxBlock = 8192, nTxLock = 65536
[    0.708367] msgmni has been set to 1701
[    0.708594] SELinux:  Registering netfilter hooks
[    0.708782] alg: No test for cipher_null (cipher_null-generic)
[    0.708971] alg: No test for digest_null (digest_null-generic)
[    0.709103] alg: No test for compress_null (compress_null-generic)
[    0.710693] alg: No test for fcrypt (fcrypt-generic)
[    0.713278] alg: No test for stdrng (krng)
[    0.713528] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    0.713650] io scheduler noop registered
[    0.713735] io scheduler anticipatory registered
[    0.713821] io scheduler deadline registered
[    0.713928] io scheduler cfq registered (default)
[    0.714254] pci 0000:01:00.0: Boot video device
[    0.714420] pcieport-driver 0000:00:01.0: setting latency timer to 64
[    0.714479] pcieport-driver 0000:00:01.0: irq 24 for MSI/MSI-X
[    0.714666] pcieport-driver 0000:00:1c.0: setting latency timer to 64
[    0.714748] pcieport-driver 0000:00:1c.0: irq 25 for MSI/MSI-X
[    0.715023] pcieport-driver 0000:00:1c.1: setting latency timer to 64
[    0.715104] pcieport-driver 0000:00:1c.1: irq 26 for MSI/MSI-X
[    0.715375] pcieport-driver 0000:00:1c.2: setting latency timer to 64
[    0.715456] pcieport-driver 0000:00:1c.2: irq 27 for MSI/MSI-X
[    0.715843] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.716868] pciehp 0000:00:1c.0:pcie02: HPC vendor_id 8086 device_id 27d0 ss_vid 0 ss_did 0
[    0.717121] pciehp 0000:00:1c.0:pcie02: service driver pciehp loaded
[    0.717147] pciehp 0000:00:1c.1:pcie02: HPC vendor_id 8086 device_id 27d2 ss_vid 0 ss_did 0
[    0.717389] pciehp 0000:00:1c.1:pcie02: service driver pciehp loaded
[    0.717416] pciehp 0000:00:1c.2:pcie02: HPC vendor_id 8086 device_id 27d4 ss_vid 0 ss_did 0
[    0.717687] pciehp 0000:00:1c.2:pcie02: service driver pciehp loaded
[    0.717746] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.717838] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.725297] decode_hpp: Could not get hotplug parameters. Use defaults
[    0.725442] acpiphp_glue: Slot 3 already registered by another hotplug driver
[    0.733389] acpiphp_ibm: ibm_acpiphp_init: acpi_walk_namespace failed
[    0.733480] fakephp: Fake PCI Hot Plug Controller Driver
[    0.734135] fakephp: pci_hp_register failed with error -16
[    0.734227] fakephp: pci_hp_register failed with error -16
[    0.734764] ACPI: AC Adapter [ADP1] (on-line)
[    0.930439] ACPI: Battery Slot [BAT0] (battery present)
[    0.930739] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[    0.930861] ACPI: Power Button (FF) [PWRF]
[    0.931071] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
[    0.931250] ACPI: Lid Switch [LID0]
[    0.931453] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
[    0.931576] ACPI: Power Button (CM) [PWRB]
[    0.931780] input: Sleep Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3
[    0.931903] ACPI: Sleep Button (CM) [SLPB]
[    0.933001] ACPI: SSDT 7FEB3C90, 022A (r1 APPLE   Cpu0Ist     3000 INTL 20050309)
[    0.933630] ACPI: SSDT 7FEB2C10, 02C3 (r1 APPLE   Cpu0Cst     3001 INTL 20050309)
[    0.934333] Monitor-Mwait will be used to enter C-1 state
[    0.934349] Monitor-Mwait will be used to enter C-2 state
[    0.934363] Monitor-Mwait will be used to enter C-3 state
[    0.934449] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[    0.934819] processor ACPI_CPU:00: registered as cooling_device0
[    0.934913] ACPI: Processor [CPU0] (supports 8 throttling states)
[    0.935571] ACPI: SSDT 7FEB3F10, 0087 (r1 APPLE   Cpu1Ist     3000 INTL 20050309)
[    0.936172] ACPI: SSDT 7FEB2F10, 0085 (r1 APPLE   Cpu1Cst     3000 INTL 20050309)
[    0.937013] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
[    0.937373] processor ACPI_CPU:01: registered as cooling_device1
[    0.937466] ACPI: Processor [CPU1] (supports 8 throttling states)
[    0.994749] Non-volatile memory driver v1.3
[    0.995018] intel_rng: FWH not detected
[    0.995140] Linux agpgart interface v0.103
[    0.995389] ipmi message handler version 39.2
[    0.995480] ipmi device interface
[    0.995685] IPMI System Interface driver.
[    1.114316] ipmi_si: Unable to find any System Interface(s)
[    1.114408] IPMI Watchdog: driver initialized
[    1.114493] Copyright (C) 2004 MontaVista Software - IPMI Powerdown via sys_reboot.
[    1.114625] Hangcheck: starting hangcheck timer 0.9.0 (tick is 180 seconds, margin is 60 seconds).
[    1.114748] Hangcheck: Using get_cycles().
[    1.114846] tpm_inf_pnp 00:03: Found TPM with ID IFX0101
[    1.114984] tpm_inf_pnp 00:03: TPM found: config base 0x4e, data base 0x4700, chip version 0x000b, vendor id 0x15d1 (Infineon), product id 0x000b (SLB 9635 TT 1.2)
[    1.115397] [drm] Initialized drm 1.1.0 20060810
[    1.116200] pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    1.116294] pci 0000:01:00.0: setting latency timer to 64
[    1.116452] [drm] Initialized radeon 1.29.0 20080528 on minor 0
[    1.119306] brd: module loaded
[    1.120676] loop: module loaded
[    1.120922] sky2 driver version 1.22
[    1.121037] sky2 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    1.121136] sky2 0000:02:00.0: setting latency timer to 64
[    1.121162] sky2 0000:02:00.0: Yukon-2 EC chip revision 2
[    1.153463] sky2 0000:02:00.0: Marvell Yukon 88E8053 Gigabit Ethernet Controller
[    1.153583]  Part Number: Yukon 88E8053
[    1.153585]  Engineering Level: Rev. 2.2
[    1.153587]  Manufacturer: Marvell
[    1.153661] sky2 0000:02:00.0: irq 28 for MSI/MSI-X
[    1.154147] sky2 eth0: addr 00:16:cb:8c:b2:65
[    1.154332] PPP generic driver version 2.4.2
[    1.154575] PPP Deflate Compression module registered
[    1.155851] PPP MPPE Compression module registered
[    1.155940] NET: Registered protocol family 24
[    1.156037] PPPoL2TP kernel driver, V1.0
[    1.157239] tun: Universal TUN/TAP device driver, 1.6
[    1.157327] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    1.157561] usbcore: registered new interface driver cdc_ether
[    1.157714] usbcore: registered new interface driver rndis_host
[    1.157872] usbcore: registered new interface driver rndis_wlan
[    1.157987] console [netcon0] enabled
[    1.158071] netconsole: network logging started
[    1.158157] Linux video capture interface: v2.00
[    1.158403] input: Macintosh mouse button emulation as /devices/virtual/input/input4
[    1.158825] Driver 'sd' needs updating - please use bus_type methods
[    1.158973] Driver 'sr' needs updating - please use bus_type methods
[    1.159175] SCSI Media Changer driver v0.25 
[    1.159317] Driver 'ch' needs updating - please use bus_type methods
[    1.159564] ata_piix 0000:00:1f.1: version 2.12
[    1.159651] ata_piix 0000:00:1f.1: power state changed by ACPI to D0
[    1.159748] ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[    1.159884] ata_piix 0000:00:1f.1: setting latency timer to 64
[    1.160061] scsi0 : ata_piix
[    1.162244] scsi1 : ata_piix
[    1.163163] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x40c0 irq 14
[    1.163257] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x40c8 irq 15
[    1.323941] ata1.00: ATAPI: MATSHITADVD-R   UJ-857, HAEA, max UDMA/66
[    1.337231] ata1.00: configured for UDMA/66
[    1.339235] scsi 0:0:0:0: CD-ROM            MATSHITA DVD-R   UJ-857   HAEA PQ: 0 ANSI: 5
[    1.341093] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
[    1.341186] Uniform CD-ROM driver Revision: 3.20
[    1.341532] sr 0:0:0:0: Attached scsi CD-ROM sr0
[    1.341701] sr 0:0:0:0: Attached scsi generic sg0 type 5
[    1.504627] ata_piix 0000:00:1f.2: enabling device (0005 -> 0007)
[    1.504725] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    1.504821] ata_piix 0000:00:1f.2: MAP [ P0 P2 -- -- ]
[    1.656694] ata_piix 0000:00:1f.2: setting latency timer to 64
[    1.656805] scsi2 : ata_piix
[    1.657075] scsi3 : ata_piix
[    1.658636] ata3: SATA max UDMA/133 cmd 0x40d8 ctl 0x40f4 bmdma 0x4020 irq 19
[    1.658731] ata4: SATA max UDMA/133 cmd 0x40d0 ctl 0x40f0 bmdma 0x4028 irq 19
[    2.157997] ata3.01: ATA-7: WDC WD1600BEVS-00RST0, 04.01G04, max UDMA/133
[    2.158091] ata3.01: 312581808 sectors, multi 0: LBA48 NCQ (depth 0/32)
[    2.210562] ata3.01: configured for UDMA/133
[    2.223429] scsi 2:0:1:0: Direct-Access     ATA      WDC WD1600BEVS-0 04.0 PQ: 0 ANSI: 5
[    2.223834] sd 2:0:1:0: [sda] 312581808 512-byte hardware sectors: (160 GB/149 GiB)
[    2.223975] sd 2:0:1:0: [sda] Write Protect is off
[    2.224063] sd 2:0:1:0: [sda] Mode Sense: 00 3a 00 00
[    2.224102] sd 2:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.224303] sd 2:0:1:0: [sda] 312581808 512-byte hardware sectors: (160 GB/149 GiB)
[    2.224443] sd 2:0:1:0: [sda] Write Protect is off
[    2.224531] sd 2:0:1:0: [sda] Mode Sense: 00 3a 00 00
[    2.224569] sd 2:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.224694]  sda: sda1 sda2 sda3 sda4 sda5
[    2.272393] sd 2:0:1:0: [sda] Attached SCSI disk
[    2.272641] sd 2:0:1:0: Attached scsi generic sg1 type 0
[    2.434835] firewire_ohci 0000:0c:03.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[    2.500019] firewire_ohci: Added fw-ohci device 0000:0c:03.0, OHCI version 1.0
[    2.500420] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    2.500533] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    2.500637] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[    2.500642] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[    2.500923] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[    2.504950] ehci_hcd 0000:00:1d.7: debug port 1
[    2.505042] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[    2.505101] ehci_hcd 0000:00:1d.7: irq 23, io mem 0x90405400
[    2.516683] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    2.516805] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    2.516898] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.517017] usb usb1: Product: EHCI Host Controller
[    2.517104] usb usb1: Manufacturer: Linux 2.6.29-rc4-rt2-tip ehci_hcd
[    2.517195] usb usb1: SerialNumber: 0000:00:1d.7
[    2.517413] usb usb1: configuration #1 chosen from 1 choice
[    2.517600] hub 1-0:1.0: USB hub found
[    2.517693] hub 1-0:1.0: 8 ports detected
[    2.518169] uhci_hcd: USB Universal Host Controller Interface driver
[    2.518293] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    2.518391] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[    2.518396] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    2.518668] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    2.518818] uhci_hcd 0000:00:1d.0: irq 23, io base 0x000040a0
[    2.518949] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[    2.519042] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.519161] usb usb2: Product: UHCI Host Controller
[    2.519249] usb usb2: Manufacturer: Linux 2.6.29-rc4-rt2-tip uhci_hcd
[    2.519341] usb usb2: SerialNumber: 0000:00:1d.0
[    2.519550] usb usb2: configuration #1 chosen from 1 choice
[    2.519743] hub 2-0:1.0: USB hub found
[    2.519834] hub 2-0:1.0: 2 ports detected
[    2.520153] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    2.520252] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[    2.520256] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    2.520528] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[    2.520680] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00004080
[    2.520816] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    2.520909] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.521030] usb usb3: Product: UHCI Host Controller
[    2.521117] usb usb3: Manufacturer: Linux 2.6.29-rc4-rt2-tip uhci_hcd
[    2.521208] usb usb3: SerialNumber: 0000:00:1d.1
[    2.521413] usb usb3: configuration #1 chosen from 1 choice
[    2.521600] hub 3-0:1.0: USB hub found
[    2.521694] hub 3-0:1.0: 2 ports detected
[    2.522005] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    2.522104] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[    2.522108] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    2.522384] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[    2.522578] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00004060
[    2.522708] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    2.522800] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.522920] usb usb4: Product: UHCI Host Controller
[    2.523006] usb usb4: Manufacturer: Linux 2.6.29-rc4-rt2-tip uhci_hcd
[    2.523097] usb usb4: SerialNumber: 0000:00:1d.2
[    2.523296] usb usb4: configuration #1 chosen from 1 choice
[    2.523486] hub 4-0:1.0: USB hub found
[    2.523578] hub 4-0:1.0: 2 ports detected
[    2.523859] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
[    2.523956] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[    2.523960] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[    2.524212] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[    2.524406] uhci_hcd 0000:00:1d.3: irq 16, io base 0x00004040
[    2.524543] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[    2.524635] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.524754] usb usb5: Product: UHCI Host Controller
[    2.524841] usb usb5: Manufacturer: Linux 2.6.29-rc4-rt2-tip uhci_hcd
[    2.524932] usb usb5: SerialNumber: 0000:00:1d.3
[    2.525126] usb usb5: configuration #1 chosen from 1 choice
[    2.525293] hub 5-0:1.0: USB hub found
[    2.525384] hub 5-0:1.0: 2 ports detected
[    2.525796] usbcore: registered new interface driver cdc_acm
[    2.525888] cdc_acm: v0.26:USB Abstract Control Model driver for USB modems and ISDN adapters
[    2.526075] usbcore: registered new interface driver usblp
[    2.526165] Initializing USB Mass Storage driver...
[    2.526344] usbcore: registered new interface driver usb-storage
[    2.526435] USB Mass Storage support registered.
[    2.526621] usbcore: registered new interface driver appledisplay
[    2.526994] PNP: No PS/2 controller found. Probing ports directly.
[    2.527968] i8042.c: No controller found.
[    2.540928] mice: PS/2 mouse device common for all mice
[    2.616918] usbcore: registered new interface driver appletouch
[    2.617086] usbcore: registered new interface driver bcm5974
[    2.617294] input: PC Speaker as /devices/platform/pcspkr/input/input5
[    2.644324] I2O subsystem v1.325
[    2.644408] i2o: max drivers = 8
[    2.650182] I2O Configuration OSM v1.323
[    2.650406] I2O Bus Adapter OSM v1.317
[    2.650562] I2O Block Device OSM v1.325
[    2.653445] I2O SCSI Peripheral OSM v1.316
[    2.653594] I2O ProcFS OSM v1.316
[    2.653780] rtc_cmos 00:09: RTC can wake from S4
[    2.653960] rtc_cmos 00:09: rtc core: registered rtc_cmos as rtc0
[    2.654116] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    2.654271] i2c /dev entries driver
[    2.654504] i801_smbus 0000:00:1f.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    2.654626] ACPI: I/O resource 0000:00:1f.3 [0xefa0-0xefbf] conflicts with ACPI region SMBI [0xefa0-0xefaf]
[    2.654751] ACPI: Device needs an ACPI driver
[    2.655221] applesmc: Apple MacBook Pro detected:
[    2.655308] applesmc:  - Model with accelerometer
[    2.657299] applesmc:  - Model with light sensors and backlight
[    2.657389] applesmc:  - Model with 12 temperature sensors
[    2.658238] applesmc: device has already been initialized (0xe0, 0x00).
[    2.658241] applesmc: device successfully initialized.
[    2.659135] applesmc: 2 fans found.
[    2.660831] input: applesmc as /devices/platform/applesmc.768/input/input6
[    2.690200] Registered led device: smc::kbd_backlight
[    2.690363] applesmc: driver successfully loaded.
[    2.690829] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.04
[    2.691094] iTCO_wdt: Found a ICH7-M or ICH7-U TCO device (Version=2, TCOBASE=0x0460)
[    2.691310] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[    2.691449] device-mapper: uevent: version 1.0.3
[    2.691657] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com
[    2.700091] device-mapper: multipath: version 1.0.5 loaded
[    2.700181] device-mapper: multipath round-robin: version 1.0.0 loaded
[    2.700346] Bluetooth: Generic Bluetooth USB driver ver 0.4
[    2.700511] usbcore: registered new interface driver btusb
[    2.703900] cpuidle: using governor ladder
[    2.704992] cpuidle: using governor menu
[    2.705263] Marking TSC unstable due to TSC halts in idle
[    2.706596] usbcore: registered new interface driver usbhid
[    2.706710] usbhid: v2.6:USB HID core driver
[    2.707034] Advanced Linux Sound Architecture Driver Version 1.0.18a.
[    2.708678] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[    2.708884] HDA Intel 0000:00:1b.0: setting latency timer to 64
[    2.738942] hda_codec: STAC922x, Apple subsys_id=106b0200
[    2.774442] input: HDA Intel at 0x90400000 irq 22 Line In at Ext Rear Jack as /devices/pci0000:00/0000:00:1b.0/input/input7
[    2.793824] input: HDA Intel at 0x90400000 irq 22 HP Out at Ext Rear Jack as /devices/pci0000:00/0000:00:1b.0/input/input8
[    2.801749] ALSA device list:
[    2.801834]   #0: Dummy 1
[    2.801914]   #1: Virtual MIDI Card 1
[    2.801999]   #2: HDA Intel at 0x90400000 irq 22
[    2.802226] oprofile: using NMI interrupt.
[    2.802350] GACT probability on
[    2.802434] Mirror/redirect action on
[    2.802518] Simple TC action Loaded
[    2.803038] netem: version 1.2
[    2.803122] u32 classifier
[    2.803203]     Performance counters on
[    2.803286]     input device check on 
[    2.803392]     Actions configured 
[    2.804015] IPv4 over IPv4 tunneling driver
[    2.804578] GRE over IPv4 tunneling driver
[    2.805188] TCP cubic registered
[    2.805272] Initializing XFRM netlink socket
[    2.805428] NET: Registered protocol family 10
[    2.806279] lo: Disabled Privacy Extensions
[    2.809108] tunl0: Disabled Privacy Extensions
[    2.810486] NET: Registered protocol family 17
[    2.810579] NET: Registered protocol family 15
[    2.810747] Bridge firewalling registered
[    2.810863] irlan0 (): not using net_device_ops yet
[    2.812234] IrCOMM protocol (Dag Brattli)
[    2.814862] Bluetooth: L2CAP ver 2.11
[    2.814947] Bluetooth: L2CAP socket layer initialized
[    2.815036] Bluetooth: SCO (Voice Link) ver 0.6
[    2.815122] Bluetooth: SCO socket layer initialized
[    2.815268] Bluetooth: RFCOMM socket layer initialized
[    2.815362] Bluetooth: RFCOMM TTY layer initialized
[    2.815450] Bluetooth: RFCOMM ver 1.10
[    2.815534] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[    2.815623] Bluetooth: BNEP filters: protocol multicast
[    2.815712] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[    2.815883] 802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
[    2.815976] All bugs added by David S. Miller <davem@redhat.com>
[    2.820471] CCID: Activated CCID 2 (TCP-like)
[    2.820588] CCID: Activated CCID 3 (TCP-Friendly Rate Control)
[    2.830366] SCTP: Hash tables configured (established 52428 bind 65536)
[    2.847663] lib80211: common routines for IEEE802.11 drivers
[    2.847773] lib80211_crypt: registered algorithm 'NULL'
[    2.847779] TIPC: Activated (version 1.6.4 compiled Feb 19 2009 16:57:08)
[    2.848303] NET: Registered protocol family 30
[    2.848392] TIPC: Started in single node mode
[    2.848479] Using IPI No-Shortcut mode
[    2.852277] registered taskstats version 1
[    2.852575] rtc_cmos 00:09: setting system clock to 2009-02-19 19:12:36 UTC (1235070756)
[    2.852698] BIOS EDD facility v0.16 2004-Jun-25, 2 devices found
[    2.853227] Freeing unused kernel memory: 420k freed
[    2.853406] Write protecting the kernel text: 5828k
[    2.853607] Write protecting the kernel read-only data: 2500k
[    2.930078] usb 1-3: new high speed USB device using ehci_hcd and address 3
[    3.000385] firewire_core: created device fw0: GUID 0016cbfffe4c8a54, S400
[    3.056174] usb 1-3: New USB device found, idVendor=090c, idProduct=1000
[    3.056288] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    3.056402] usb 1-3: Product: Flash Voyager
[    3.056503] usb 1-3: Manufacturer: Corsair
[    3.056602] usb 1-3: SerialNumber: A400000000028713
[    3.056880] usb 1-3: configuration #1 chosen from 1 choice
[    3.057694] scsi4 : SCSI emulation for USB Mass Storage devices
[    3.058040] usb-storage: device found at 3
[    3.058043] usb-storage: waiting for device to settle before scanning
[    3.163409] usb 1-4: new high speed USB device using ehci_hcd and address 4
[    3.287174] usb 1-4: New USB device found, idVendor=05ac, idProduct=8300
[    3.287289] usb 1-4: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    3.287643] usb 1-4: configuration #1 chosen from 1 choice
[    3.726729] usb 2-2: new full speed USB device using uhci_hcd and address 2
[    3.905036] usb 2-2: New USB device found, idVendor=05ac, idProduct=0218
[    3.905180] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    3.905293] usb 2-2: Product: Apple Internal Keyboard / Trackpad
[    3.905410] usb 2-2: Manufacturer: Apple Computer
[    3.905599] usb 2-2: configuration #1 chosen from 1 choice
[    3.913573] input: Apple Computer Apple Internal Keyboard / Trackpad as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.0/input/input9
[    3.934384] apple 0003:05AC:0218.0001: input,hidraw0: USB HID v1.11 Keyboard [Apple Computer Apple Internal Keyboard / Trackpad] on usb-0000:00:1d.0-2/input0
[    3.939034] appletouch: Geyser mode initialized.
[    3.939256] input: appletouch as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.1/input/input10
[    3.970172] input: Apple Computer Apple Internal Keyboard / Trackpad as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.2/input/input11
[    3.991080] apple 0003:05AC:0218.0002: input,hidraw1: USB HID v1.11 Device [Apple Computer Apple Internal Keyboard / Trackpad] on usb-0000:00:1d.0-2/input2
[    4.000097] Clocksource tsc unstable (delta = -277709176 ns)
[    4.216788] usb 4-2: new full speed USB device using uhci_hcd and address 2
[    4.388806] usb 4-2: New USB device found, idVendor=05ac, idProduct=8240
[    4.388920] usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    4.389033] usb 4-2: Product: IR Receiver
[    4.389132] usb 4-2: Manufacturer: Apple Computer, Inc.
[    4.389304] usb 4-2: configuration #1 chosen from 1 choice
[    4.396877] generic-usb 0003:05AC:8240.0003: hidraw2: USB HID v1.11 Device [Apple Computer, Inc. IR Receiver] on usb-0000:00:1d.2-2/input0
[    4.623456] usb 5-1: new full speed USB device using uhci_hcd and address 2
[    4.793665] usb 5-1: New USB device found, idVendor=05ac, idProduct=1000
[    4.793778] usb 5-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    4.793950] usb 5-1: configuration #1 chosen from 1 choice
[    4.814124] input: HID 05ac:1000 as /devices/pci0000:00/0000:00:1d.3/usb5/5-1/5-1:1.0/input/input12
[    4.834332] generic-usb 0003:05AC:1000.0004: input,hidraw3: USB HID v1.11 Keyboard [HID 05ac:1000] on usb-0000:00:1d.3-1/input0
[    4.850127] input: HID 05ac:1000 as /devices/pci0000:00/0000:00:1d.3/usb5/5-1/5-1:1.1/input/input13
[    4.871070] generic-usb 0003:05AC:1000.0005: input,hidraw4: USB HID v1.11 Mouse [HID 05ac:1000] on usb-0000:00:1d.3-1/input1
[    8.057172] usb-storage: device scan complete
[    8.058235] scsi 4:0:0:0: Direct-Access     Corsair  Flash Voyager    1100 PQ: 0 ANSI: 0 CCS
[    8.059814] sd 4:0:0:0: [sdb] 7929856 512-byte hardware sectors: (4.06 GB/3.78 GiB)
[    8.060721] sd 4:0:0:0: [sdb] Write Protect is off
[    8.060833] sd 4:0:0:0: [sdb] Mode Sense: 43 00 00 00
[    8.060836] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[    8.063853] sd 4:0:0:0: [sdb] 7929856 512-byte hardware sectors: (4.06 GB/3.78 GiB)
[    8.064826] sd 4:0:0:0: [sdb] Write Protect is off
[    8.064932] sd 4:0:0:0: [sdb] Mode Sense: 43 00 00 00
[    8.064937] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[    8.065050]  sdb: sdb1
[    8.066233] sd 4:0:0:0: [sdb] Attached SCSI removable disk
[    8.066398] sd 4:0:0:0: Attached scsi generic sg2 type 0
[   13.169831] BUG: sleeping function called from invalid context at arch/x86/mm/highmem_32.c:8
[   13.169957] in_atomic(): 0, irqs_disabled(): 1, pid: 1030, name: cryptsetup
[   13.170075] Pid: 1030, comm: cryptsetup Tainted: G        W  2.6.29-rc4-rt2-tip #54
[   13.170196] Call Trace:
[   13.170284]  [<c0444cdd>] __might_sleep+0xda/0xf0
[   13.170374]  [<c043ee55>] kmap+0x50/0x77
[   13.170460]  [<c043db3b>] gup_pte_range+0x4b/0xe9
[   13.170548]  [<c043dcb7>] get_user_pages_fast+0xde/0x17f
[   13.170639]  [<c04f75f1>] dio_get_page+0x59/0x124
[   13.170729]  [<c04f8258>] __blockdev_direct_IO+0x4ad/0xabe
[   13.170819]  [<c04f5cdb>] ? blkdev_get_blocks+0x0/0x11c
[   13.170837]  [<c04f730a>] blkdev_direct_IO+0x3f/0x55
[   13.170837]  [<c04f5cdb>] ? blkdev_get_blocks+0x0/0x11c
[   13.170837]  [<c04a977a>] generic_file_aio_read+0xfd/0x587
[   13.170837]  [<c05ff445>] ? avc_has_perm+0x56/0x71
[   13.170837]  [<c04d0fcf>] do_sync_read+0xc6/0x118
[   13.170837]  [<c0467414>] ? autoremove_wake_function+0x0/0x54
[   13.170837]  [<c06046d6>] ? selinux_file_permission+0x119/0x132
[   13.170837]  [<c05fa4dc>] ? security_file_permission+0x1e/0x31
[   13.170837]  [<c04d0f09>] ? do_sync_read+0x0/0x118
[   13.170837]  [<c04d1b61>] vfs_read+0x99/0x14e
[   13.170837]  [<c04d1cf7>] sys_read+0x50/0x87
[   13.170837]  [<c0420086>] sysenter_do_call+0x12/0x21
[   14.796047] BUG: sleeping function called from invalid context at arch/x86/mm/highmem_32.c:8
[   14.796177] in_atomic(): 0, irqs_disabled(): 1, pid: 1045, name: cryptsetup
[   14.796273] Pid: 1045, comm: cryptsetup Tainted: G        W  2.6.29-rc4-rt2-tip #54
[   14.796394] Call Trace:
[   14.796485]  [<c0444cdd>] __might_sleep+0xda/0xf0
[   14.796573]  [<c043ee55>] kmap+0x50/0x77
[   14.796660]  [<c043db3b>] gup_pte_range+0x4b/0xe9
[   14.796671]  [<c043dcb7>] get_user_pages_fast+0xde/0x17f
[   14.796671]  [<c04f75f1>] dio_get_page+0x59/0x124
[   14.796671]  [<c04f8258>] __blockdev_direct_IO+0x4ad/0xabe
[   14.796671]  [<c04f5cdb>] ? blkdev_get_blocks+0x0/0x11c
[   14.796671]  [<c04f730a>] blkdev_direct_IO+0x3f/0x55
[   14.796671]  [<c04f5cdb>] ? blkdev_get_blocks+0x0/0x11c
[   14.796671]  [<c04a977a>] generic_file_aio_read+0xfd/0x587
[   14.796671]  [<c05ff445>] ? avc_has_perm+0x56/0x71
[   14.796671]  [<c04d0fcf>] do_sync_read+0xc6/0x118
[   14.796671]  [<c0467414>] ? autoremove_wake_function+0x0/0x54
[   14.796671]  [<c06046d6>] ? selinux_file_permission+0x119/0x132
[   14.796671]  [<c05fa4dc>] ? security_file_permission+0x1e/0x31
[   14.796671]  [<c04d0f09>] ? do_sync_read+0x0/0x118
[   14.796671]  [<c04d1b61>] vfs_read+0x99/0x14e
[   14.796671]  [<c04d1cf7>] sys_read+0x50/0x87
[   14.796671]  [<c0420086>] sysenter_do_call+0x12/0x21
[   17.837434] EXT3-fs: mounted filesystem with ordered data mode.
[   17.837844] kjournald starting.  Commit interval 5 seconds
[   17.966524] SELinux:  Disabled at runtime.
[   17.966629] SELinux:  Unregistering netfilter hooks
[   18.056792] type=1404 audit(1235070771.704:2): selinux=0 auid=4294967295 ses=4294967295
[   21.276574] udevd version 127 started
[   21.795981] BUG: sleeping function called from invalid context at arch/x86/mm/highmem_32.c:8
[   21.795986] in_atomic(): 0, irqs_disabled(): 1, pid: 1374, name: cdrom_id
[   21.795990] Pid: 1374, comm: cdrom_id Tainted: G        W  2.6.29-rc4-rt2-tip #54
[   21.795993] Call Trace:
[   21.796003]  [<c0444cdd>] __might_sleep+0xda/0xf0
[   21.796007]  [<c043ee55>] kmap+0x50/0x77
[   21.796011]  [<c043db3b>] gup_pte_range+0x4b/0xe9
[   21.796015]  [<c043dcb7>] get_user_pages_fast+0xde/0x17f
[   21.796020]  [<c04f5505>] bio_map_user_iov+0x120/0x220
[   21.796024]  [<c04f5631>] bio_map_user+0x2c/0x42
[   21.796029]  [<c064fe04>] blk_rq_map_user+0xe2/0x1f2
[   21.796034]  [<c045a6ad>] ? capable+0x2d/0x5a
[   21.796039]  [<c065344a>] sg_io+0x1d5/0x32d
[   21.796045]  [<c04cd348>] ? kfree+0x84/0x9a
[   21.796049]  [<c0653adb>] scsi_cmd_ioctl+0x24f/0x4a4
[   21.796054]  [<c078f6ed>] ? cdrom_open+0x84b/0x8c3
[   21.796058]  [<c04f52a1>] ? bio_add_page+0x38/0x50
[   21.796062]  [<c078e185>] cdrom_ioctl+0x3e/0xd5b
[   21.796066]  [<c0444e4e>] ? update_curr+0x9c/0x1b7
[   21.796072]  [<c09aabd9>] ? rt_spin_lock+0x32/0x79
[   21.796077]  [<c04b94fe>] ? page_address+0x95/0xcb
[   21.796082]  [<c0765f9e>] sr_block_ioctl+0x4f/0x94
[   21.796086]  [<c065107d>] __blkdev_driver_ioctl+0x65/0x88
[   21.796090]  [<c0651b12>] blkdev_ioctl+0xa2b/0xa65
[   21.796095]  [<c065bafc>] ? kobject_get+0x20/0x37
[   21.796099]  [<c0652230>] ? get_disk+0x7e/0xa8
[   21.796103]  [<c09aabd9>] ? rt_spin_lock+0x32/0x79
[   21.796107]  [<c04b94fe>] ? page_address+0x95/0xcb
[   21.796111]  [<c04b9b51>] ? kmap_high+0x3f9/0x40f
[   21.796115]  [<c0478126>] ? rt_up+0x3a/0x61
[   21.796119]  [<c09ab92d>] ? unlock_kernel+0x34/0x47
[   21.796123]  [<c04a7eb7>] ? find_get_page+0x84/0xab
[   21.796127]  [<c044aad5>] ? __wake_up+0x3b/0x56
[   21.796131]  [<c04b95db>] ? kunmap_high+0xa7/0xbb
[   21.796135]  [<c04f6137>] block_ioctl+0x3f/0x58
[   21.796139]  [<c04f60f8>] ? block_ioctl+0x0/0x58
[   21.796143]  [<c04dde0c>] vfs_ioctl+0x2d/0x85
[   21.796146]  [<c04de412>] do_vfs_ioctl+0x4b5/0x501
[   21.796151]  [<c04bc25a>] ? handle_mm_fault+0x2d3/0x699
[   21.796155]  [<c04de4b5>] sys_ioctl+0x57/0x82
[   21.796159]  [<c0420086>] sysenter_do_call+0x12/0x21
[   23.427669] cfg80211: Calling CRDA to update world regulatory domain
[   24.409852] cfg80211: World regulatory domain updated:
[   24.409857] 	(start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   24.409861] 	(2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   24.741209] ath5k 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[   24.741226] ath5k 0000:03:00.0: setting latency timer to 64
[   24.741352] ath5k 0000:03:00.0: registered as 'phy0'
[   24.895180] wmaster0 (ath5k): not using net_device_ops yet
[   24.896728] phy0: Selected rate control algorithm 'minstrel'
[   24.896795] wlan0 (ath5k): not using net_device_ops yet
[   24.898345] ath5k phy0: Atheros AR5414 chip found (MAC: 0xa3, PHY: 0x61)
[   25.937648] BUG: sleeping function called from invalid context at arch/x86/mm/highmem_32.c:8
[   25.937657] in_atomic(): 0, irqs_disabled(): 1, pid: 2075, name: lvm
[   25.937664] Pid: 2075, comm: lvm Tainted: G        W  2.6.29-rc4-rt2-tip #54
[   25.937670] Call Trace:
[   25.937683]  [<c0444cdd>] __might_sleep+0xda/0xf0
[   25.937691]  [<c043ee55>] kmap+0x50/0x77
[   25.937697]  [<c043db3b>] gup_pte_range+0x4b/0xe9
[   25.937705]  [<c043dcb7>] get_user_pages_fast+0xde/0x17f
[   25.937713]  [<c04f75f1>] dio_get_page+0x59/0x124
[   25.937721]  [<c04f8258>] __blockdev_direct_IO+0x4ad/0xabe
[   25.937728]  [<c04f5cdb>] ? blkdev_get_blocks+0x0/0x11c
[   25.937738]  [<c065bafc>] ? kobject_get+0x20/0x37
[   25.937746]  [<c0652230>] ? get_disk+0x7e/0xa8
[   25.937753]  [<c04f730a>] blkdev_direct_IO+0x3f/0x55
[   25.937760]  [<c04f5cdb>] ? blkdev_get_blocks+0x0/0x11c
[   25.937768]  [<c04a977a>] generic_file_aio_read+0xfd/0x587
[   25.937775]  [<c04f712c>] ? blkdev_open+0x71/0xaf
[   25.937785]  [<c04cf51f>] ? __dentry_open+0x193/0x276
[   25.937792]  [<c04d0fcf>] do_sync_read+0xc6/0x118
[   25.937801]  [<c0467414>] ? autoremove_wake_function+0x0/0x54
[   25.937811]  [<c09aa5cb>] ? rt_mutex_lock+0x23/0x5c
[   25.937819]  [<c09aacf2>] ? _mutex_unlock+0x17/0x2a
[   25.937828]  [<c05fa4dc>] ? security_file_permission+0x1e/0x31
[   25.937835]  [<c04d0f09>] ? do_sync_read+0x0/0x118
[   25.937841]  [<c04d1b61>] vfs_read+0x99/0x14e
[   25.937848]  [<c04d1cf7>] sys_read+0x50/0x87
[   25.937855]  [<c0420086>] sysenter_do_call+0x12/0x21
[   26.904618] EXT3 FS on dm-0, internal journal
[   27.017853] kjournald starting.  Commit interval 5 seconds
[   27.018257] EXT3 FS on sda3, internal journal
[   27.018268] EXT3-fs: mounted filesystem with ordered data mode.
[   46.073402] usb 2-1: new low speed USB device using uhci_hcd and address 3
[   46.245423] usb 2-1: New USB device found, idVendor=413c, idProduct=2003
[   46.245431] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[   46.245437] usb 2-1: Product: DELL USB Keyboard
[   46.245441] usb 2-1: Manufacturer: DELL
[   46.245633] usb 2-1: configuration #1 chosen from 1 choice
[   46.263774] input: DELL DELL USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.0/input/input14
[   46.281111] generic-usb 0003:413C:2003.0006: input,hidraw5: USB HID v1.10 Keyboard [DELL DELL USB Keyboard] on usb-0000:00:1d.0-1/input0
[   46.309496] input: DELL DELL USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.1/input/input15
[   46.331110] generic-usb 0003:413C:2003.0007: input,hidraw6: USB HID v1.10 Device [DELL DELL USB Keyboard] on usb-0000:00:1d.0-1/input1


Belonging config is:
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.29-rc4-rt2
# Thu Feb 19 16:26:17 2009
#
# CONFIG_64BIT is not set
CONFIG_X86_32=y
# CONFIG_X86_64 is not set
CONFIG_X86=y
CONFIG_ARCH_DEFCONFIG="arch/x86/configs/i386_defconfig"
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_CLOCKSOURCE_WATCHDOG=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_FAST_CMPXCHG_LOCAL=y
CONFIG_MMU=y
CONFIG_ZONE_DMA=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_IOMAP=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_ASM_SEMAPHORES=y
CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
# CONFIG_GENERIC_TIME_VSYSCALL is not set
CONFIG_ARCH_HAS_CPU_RELAX=y
CONFIG_ARCH_HAS_DEFAULT_IDLE=y
CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
# CONFIG_HAVE_CPUMASK_OF_CPU_MAP is not set
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_ZONE_DMA32 is not set
CONFIG_ARCH_POPULATES_NODE_MAP=y
# CONFIG_AUDIT_ARCH is not set
CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_PENDING_IRQ=y
CONFIG_USE_GENERIC_SMP_HELPERS=y
CONFIG_X86_32_SMP=y
CONFIG_X86_HT=y
CONFIG_X86_TRAMPOLINE=y
CONFIG_KTIME_SCALAR=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"

#
# General setup
#
CONFIG_EXPERIMENTAL=y
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
CONFIG_TASKSTATS=y
CONFIG_TASK_DELAY_ACCT=y
CONFIG_TASK_XACCT=y
CONFIG_TASK_IO_ACCOUNTING=y
CONFIG_AUDIT=y
CONFIG_AUDITSYSCALL=y
CONFIG_AUDIT_TREE=y

#
# RCU Subsystem
#
# CONFIG_CLASSIC_RCU is not set
# CONFIG_TREE_RCU is not set
CONFIG_PREEMPT_RCU=y
# CONFIG_RCU_TRACE is not set
# CONFIG_TREE_RCU_TRACE is not set
# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=17
CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
# CONFIG_GROUP_SCHED is not set
CONFIG_CGROUPS=y
# CONFIG_CGROUP_DEBUG is not set
CONFIG_CGROUP_NS=y
# CONFIG_CGROUP_FREEZER is not set
# CONFIG_CGROUP_DEVICE is not set
CONFIG_CPUSETS=y
CONFIG_PROC_PID_CPUSET=y
CONFIG_CGROUP_CPUACCT=y
CONFIG_RESOURCE_COUNTERS=y
# CONFIG_CGROUP_MEM_RES_CTLR is not set
# CONFIG_SYSFS_DEPRECATED_V2 is not set
CONFIG_RELAY=y
CONFIG_NAMESPACES=y
CONFIG_UTS_NS=y
CONFIG_IPC_NS=y
CONFIG_USER_NS=y
CONFIG_PID_NS=y
# CONFIG_NET_NS is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
# CONFIG_EMBEDDED is not set
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
CONFIG_KALLSYMS_EXTRA_PASS=y
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_PCSPKR_PLATFORM=y
# CONFIG_COMPAT_BRK is not set
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_HAVE_PERF_COUNTERS=y

#
# Performance Counters
#
# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
CONFIG_PROFILING=y
CONFIG_TRACEPOINTS=y
CONFIG_MARKERS=y
CONFIG_OPROFILE=y
# CONFIG_OPROFILE_IBS is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_PROFILE_NMI=y
CONFIG_KPROBES=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_KRETPROBES=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
CONFIG_MODULE_SRCVERSION_ALL=y
CONFIG_STOP_MACHINE=y
CONFIG_BLOCK=y
CONFIG_LBD=y
CONFIG_BLK_DEV_BSG=y
# CONFIG_BLK_DEV_INTEGRITY is not set

#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
# CONFIG_DEFAULT_AS is not set
# CONFIG_DEFAULT_DEADLINE is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
CONFIG_PREEMPT_NOTIFIERS=y
CONFIG_FREEZER=y

#
# Processor type and features
#
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_SMP=y
# CONFIG_SPARSE_IRQ is not set
# CONFIG_X86_MPPARSE is not set
# CONFIG_X86_BIGSMP is not set
CONFIG_X86_EXTENDED_PLATFORM=y
# CONFIG_X86_ELAN is not set
# CONFIG_X86_RDC321X is not set
# CONFIG_X86_32_NON_STANDARD is not set
CONFIG_SCHED_OMIT_FRAME_POINTER=y
# CONFIG_PARAVIRT_GUEST is not set
# CONFIG_MEMTEST is not set
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
CONFIG_MPENTIUMM=y
# CONFIG_MPENTIUM4 is not set
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
# CONFIG_MK8 is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MEFFICEON is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MGEODEGX1 is not set
# CONFIG_MGEODE_LX is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
# CONFIG_MVIAC7 is not set
# CONFIG_MPSC is not set
# CONFIG_MCORE2 is not set
# CONFIG_GENERIC_CPU is not set
# CONFIG_X86_GENERIC is not set
CONFIG_X86_CPU=y
CONFIG_X86_L1_CACHE_BYTES=64
CONFIG_X86_INTERNODE_CACHE_BYTES=64
CONFIG_X86_CMPXCHG=y
CONFIG_X86_L1_CACHE_SHIFT=6
CONFIG_X86_XADD=y
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INVLPG=y
CONFIG_X86_BSWAP=y
CONFIG_X86_POPAD_OK=y
CONFIG_X86_INTEL_USERCOPY=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
CONFIG_X86_TSC=y
CONFIG_X86_CMOV=y
CONFIG_X86_MINIMUM_CPU_FAMILY=4
CONFIG_X86_DEBUGCTLMSR=y
CONFIG_CPU_SUP_INTEL=y
CONFIG_CPU_SUP_CYRIX_32=y
CONFIG_CPU_SUP_AMD=y
CONFIG_CPU_SUP_CENTAUR_32=y
CONFIG_CPU_SUP_TRANSMETA_32=y
CONFIG_CPU_SUP_UMC_32=y
CONFIG_X86_DS=y
CONFIG_X86_PTRACE_BTS=y
CONFIG_HPET_TIMER=y
CONFIG_HPET_EMULATE_RTC=y
CONFIG_DMI=y
# CONFIG_IOMMU_HELPER is not set
# CONFIG_IOMMU_API is not set
CONFIG_NR_CPUS=4
# CONFIG_SCHED_SMT is not set
CONFIG_SCHED_MC=y
# CONFIG_PREEMPT_NONE is not set
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT_DESKTOP is not set
CONFIG_PREEMPT_RT=y
CONFIG_PREEMPT=y
CONFIG_PREEMPT_SOFTIRQS=y
CONFIG_PREEMPT_HARDIRQS=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
# CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS is not set
CONFIG_X86_MCE=y
# CONFIG_X86_MCE_NONFATAL is not set
CONFIG_X86_MCE_P4THERMAL=y
CONFIG_VM86=y
# CONFIG_TOSHIBA is not set
# CONFIG_I8K is not set
# CONFIG_X86_REBOOTFIXUPS is not set
CONFIG_MICROCODE=y
CONFIG_MICROCODE_INTEL=y
# CONFIG_MICROCODE_AMD is not set
CONFIG_MICROCODE_OLD_INTERFACE=y
CONFIG_X86_MSR=y
CONFIG_X86_CPUID=y
# CONFIG_NOHIGHMEM is not set
CONFIG_HIGHMEM4G=y
# CONFIG_HIGHMEM64G is not set
CONFIG_PAGE_OFFSET=0xC0000000
CONFIG_HIGHMEM=y
# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_ILLEGAL_POINTER_VALUE=0
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
CONFIG_SPARSEMEM_STATIC=y
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
CONFIG_MMU_NOTIFIER=y
CONFIG_HIGHPTE=y
# CONFIG_X86_CHECK_BIOS_CORRUPTION is not set
CONFIG_X86_RESERVE_LOW_64K=y
# CONFIG_MATH_EMULATION is not set
CONFIG_MTRR=y
CONFIG_MTRR_SANITIZER=y
CONFIG_MTRR_SANITIZER_ENABLE_DEFAULT=0
CONFIG_MTRR_SANITIZER_SPARE_REG_NR_DEFAULT=1
CONFIG_X86_PAT=y
CONFIG_EFI=y
CONFIG_SECCOMP=y
CONFIG_CC_STACKPROTECTOR_ALL=y
CONFIG_CC_STACKPROTECTOR=y
# CONFIG_HZ_100 is not set
# CONFIG_HZ_250 is not set
CONFIG_HZ_300=y
# CONFIG_HZ_1000 is not set
CONFIG_HZ=300
CONFIG_SCHED_HRTICK=y
CONFIG_KEXEC=y
CONFIG_CRASH_DUMP=y
# CONFIG_KEXEC_JUMP is not set
CONFIG_PHYSICAL_START=0x400000
CONFIG_RELOCATABLE=y
CONFIG_PHYSICAL_ALIGN=0x400000
CONFIG_HOTPLUG_CPU=y
# CONFIG_COMPAT_VDSO is not set
# CONFIG_CMDLINE_BOOL is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_HARDIRQS_SW_RESEND=y

#
# Power management and ACPI options
#
CONFIG_PM=y
CONFIG_PM_DEBUG=y
# CONFIG_PM_VERBOSE is not set
CONFIG_CAN_PM_TRACE=y
# CONFIG_PM_TRACE_RTC is not set
CONFIG_PM_SLEEP_SMP=y
CONFIG_PM_SLEEP=y
CONFIG_SUSPEND=y
CONFIG_PM_TEST_SUSPEND=y
CONFIG_SUSPEND_FREEZER=y
CONFIG_HIBERNATION=y
CONFIG_PM_STD_PARTITION=""
CONFIG_ACPI=y
CONFIG_ACPI_SLEEP=y
# CONFIG_ACPI_PROCFS is not set
# CONFIG_ACPI_PROCFS_POWER is not set
CONFIG_ACPI_SYSFS_POWER=y
CONFIG_ACPI_PROC_EVENT=y
CONFIG_ACPI_AC=y
CONFIG_ACPI_BATTERY=y
CONFIG_ACPI_BUTTON=y
CONFIG_ACPI_VIDEO=m
CONFIG_ACPI_FAN=y
CONFIG_ACPI_DOCK=y
CONFIG_ACPI_PROCESSOR=y
CONFIG_ACPI_HOTPLUG_CPU=y
CONFIG_ACPI_THERMAL=y
# CONFIG_ACPI_CUSTOM_DSDT is not set
CONFIG_ACPI_BLACKLIST_YEAR=1999
# CONFIG_ACPI_DEBUG is not set
CONFIG_ACPI_PCI_SLOT=y
CONFIG_ACPI_SYSTEM=y
CONFIG_X86_PM_TIMER=y
CONFIG_ACPI_CONTAINER=y
CONFIG_ACPI_SBS=y
# CONFIG_APM is not set

#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_TABLE=y
CONFIG_CPU_FREQ_DEBUG=y
CONFIG_CPU_FREQ_STAT=y
CONFIG_CPU_FREQ_STAT_DETAILS=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
CONFIG_CPU_FREQ_GOV_POWERSAVE=y
CONFIG_CPU_FREQ_GOV_USERSPACE=y
CONFIG_CPU_FREQ_GOV_ONDEMAND=y
CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y

#
# CPUFreq processor drivers
#
CONFIG_X86_ACPI_CPUFREQ=y
# CONFIG_X86_POWERNOW_K6 is not set
# CONFIG_X86_POWERNOW_K7 is not set
# CONFIG_X86_POWERNOW_K8 is not set
# CONFIG_X86_GX_SUSPMOD is not set
# CONFIG_X86_SPEEDSTEP_CENTRINO is not set
CONFIG_X86_SPEEDSTEP_ICH=y
CONFIG_X86_SPEEDSTEP_SMI=y
# CONFIG_X86_P4_CLOCKMOD is not set
# CONFIG_X86_CPUFREQ_NFORCE2 is not set
# CONFIG_X86_LONGRUN is not set
# CONFIG_X86_LONGHAUL is not set
# CONFIG_X86_E_POWERSAVER is not set

#
# shared options
#
CONFIG_X86_SPEEDSTEP_LIB=y
# CONFIG_X86_SPEEDSTEP_RELAXED_CAP_CHECK is not set
CONFIG_CPU_IDLE=y
CONFIG_CPU_IDLE_GOV_LADDER=y
CONFIG_CPU_IDLE_GOV_MENU=y

#
# Bus options (PCI etc.)
#
CONFIG_PCI=y
# CONFIG_PCI_GOBIOS is not set
# CONFIG_PCI_GOMMCONFIG is not set
# CONFIG_PCI_GODIRECT is not set
# CONFIG_PCI_GOOLPC is not set
CONFIG_PCI_GOANY=y
CONFIG_PCI_BIOS=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
CONFIG_PCI_DOMAINS=y
CONFIG_PCIEPORTBUS=y
CONFIG_HOTPLUG_PCI_PCIE=y
CONFIG_PCIEAER=y
CONFIG_PCIEASPM=y
# CONFIG_PCIEASPM_DEBUG is not set
CONFIG_ARCH_SUPPORTS_MSI=y
CONFIG_PCI_MSI=y
CONFIG_PCI_LEGACY=y
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_STUB is not set
CONFIG_HT_IRQ=y
CONFIG_ISA_DMA_API=y
# CONFIG_ISA is not set
# CONFIG_MCA is not set
# CONFIG_SCx200 is not set
# CONFIG_OLPC is not set
# CONFIG_PCCARD is not set
CONFIG_HOTPLUG_PCI=y
CONFIG_HOTPLUG_PCI_FAKE=y
# CONFIG_HOTPLUG_PCI_COMPAQ is not set
# CONFIG_HOTPLUG_PCI_IBM is not set
CONFIG_HOTPLUG_PCI_ACPI=y
CONFIG_HOTPLUG_PCI_ACPI_IBM=y
# CONFIG_HOTPLUG_PCI_CPCI is not set
# CONFIG_HOTPLUG_PCI_SHPC is not set

#
# Executable file formats / Emulations
#
CONFIG_BINFMT_ELF=y
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
CONFIG_HAVE_AOUT=y
# CONFIG_BINFMT_AOUT is not set
CONFIG_BINFMT_MISC=y
CONFIG_HAVE_ATOMIC_IOMAP=y
CONFIG_NET=y

#
# Networking options
#
CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
CONFIG_XFRM=y
CONFIG_XFRM_USER=y
CONFIG_XFRM_SUB_POLICY=y
CONFIG_XFRM_MIGRATE=y
CONFIG_XFRM_STATISTICS=y
CONFIG_XFRM_IPCOMP=y
CONFIG_NET_KEY=y
CONFIG_NET_KEY_MIGRATE=y
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
CONFIG_ASK_IP_FIB_HASH=y
# CONFIG_IP_FIB_TRIE is not set
CONFIG_IP_FIB_HASH=y
CONFIG_IP_MULTIPLE_TABLES=y
CONFIG_IP_ROUTE_MULTIPATH=y
CONFIG_IP_ROUTE_VERBOSE=y
# CONFIG_IP_PNP is not set
CONFIG_NET_IPIP=y
CONFIG_NET_IPGRE=y
CONFIG_NET_IPGRE_BROADCAST=y
CONFIG_IP_MROUTE=y
CONFIG_IP_PIMSM_V1=y
CONFIG_IP_PIMSM_V2=y
# CONFIG_ARPD is not set
CONFIG_SYN_COOKIES=y
CONFIG_INET_AH=y
CONFIG_INET_ESP=y
CONFIG_INET_IPCOMP=y
CONFIG_INET_XFRM_TUNNEL=y
CONFIG_INET_TUNNEL=y
CONFIG_INET_XFRM_MODE_TRANSPORT=y
CONFIG_INET_XFRM_MODE_TUNNEL=y
CONFIG_INET_XFRM_MODE_BEET=y
CONFIG_INET_LRO=y
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
CONFIG_TCP_CONG_ADVANCED=y
CONFIG_TCP_CONG_BIC=m
CONFIG_TCP_CONG_CUBIC=y
CONFIG_TCP_CONG_WESTWOOD=m
CONFIG_TCP_CONG_HTCP=m
CONFIG_TCP_CONG_HSTCP=m
CONFIG_TCP_CONG_HYBLA=m
CONFIG_TCP_CONG_VEGAS=m
CONFIG_TCP_CONG_SCALABLE=m
CONFIG_TCP_CONG_LP=m
CONFIG_TCP_CONG_VENO=m
CONFIG_TCP_CONG_YEAH=m
CONFIG_TCP_CONG_ILLINOIS=m
# CONFIG_DEFAULT_BIC is not set
CONFIG_DEFAULT_CUBIC=y
# CONFIG_DEFAULT_HTCP is not set
# CONFIG_DEFAULT_VEGAS is not set
# CONFIG_DEFAULT_WESTWOOD is not set
# CONFIG_DEFAULT_RENO is not set
CONFIG_DEFAULT_TCP_CONG="cubic"
CONFIG_TCP_MD5SIG=y
CONFIG_IPV6=y
CONFIG_IPV6_PRIVACY=y
CONFIG_IPV6_ROUTER_PREF=y
CONFIG_IPV6_ROUTE_INFO=y
CONFIG_IPV6_OPTIMISTIC_DAD=y
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
CONFIG_INET6_IPCOMP=m
CONFIG_IPV6_MIP6=m
CONFIG_INET6_XFRM_TUNNEL=m
CONFIG_INET6_TUNNEL=m
CONFIG_INET6_XFRM_MODE_TRANSPORT=m
CONFIG_INET6_XFRM_MODE_TUNNEL=m
CONFIG_INET6_XFRM_MODE_BEET=m
CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
CONFIG_IPV6_SIT=m
CONFIG_IPV6_NDISC_NODETYPE=y
CONFIG_IPV6_TUNNEL=m
CONFIG_IPV6_MULTIPLE_TABLES=y
CONFIG_IPV6_SUBTREES=y
# CONFIG_IPV6_MROUTE is not set
CONFIG_NETLABEL=y
CONFIG_NETWORK_SECMARK=y
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
CONFIG_NETFILTER_ADVANCED=y
CONFIG_BRIDGE_NETFILTER=y

#
# Core Netfilter Configuration
#
CONFIG_NETFILTER_NETLINK=m
CONFIG_NETFILTER_NETLINK_QUEUE=m
CONFIG_NETFILTER_NETLINK_LOG=m
CONFIG_NF_CONNTRACK=m
CONFIG_NF_CT_ACCT=y
CONFIG_NF_CONNTRACK_MARK=y
CONFIG_NF_CONNTRACK_SECMARK=y
CONFIG_NF_CONNTRACK_EVENTS=y
CONFIG_NF_CT_PROTO_DCCP=m
CONFIG_NF_CT_PROTO_GRE=m
CONFIG_NF_CT_PROTO_SCTP=m
CONFIG_NF_CT_PROTO_UDPLITE=m
CONFIG_NF_CONNTRACK_AMANDA=m
CONFIG_NF_CONNTRACK_FTP=m
CONFIG_NF_CONNTRACK_H323=m
CONFIG_NF_CONNTRACK_IRC=m
CONFIG_NF_CONNTRACK_NETBIOS_NS=m
CONFIG_NF_CONNTRACK_PPTP=m
CONFIG_NF_CONNTRACK_SANE=m
CONFIG_NF_CONNTRACK_SIP=m
CONFIG_NF_CONNTRACK_TFTP=m
CONFIG_NF_CT_NETLINK=m
CONFIG_NETFILTER_TPROXY=m
CONFIG_NETFILTER_XTABLES=m
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=m
CONFIG_NETFILTER_XT_TARGET_DSCP=m
CONFIG_NETFILTER_XT_TARGET_MARK=m
CONFIG_NETFILTER_XT_TARGET_NFLOG=m
CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
CONFIG_NETFILTER_XT_TARGET_RATEEST=m
CONFIG_NETFILTER_XT_TARGET_TPROXY=m
CONFIG_NETFILTER_XT_TARGET_TRACE=m
CONFIG_NETFILTER_XT_TARGET_SECMARK=m
CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
CONFIG_NETFILTER_XT_MATCH_COMMENT=m
CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
CONFIG_NETFILTER_XT_MATCH_DCCP=m
CONFIG_NETFILTER_XT_MATCH_DSCP=m
CONFIG_NETFILTER_XT_MATCH_ESP=m
CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
CONFIG_NETFILTER_XT_MATCH_HELPER=m
CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
CONFIG_NETFILTER_XT_MATCH_LENGTH=m
CONFIG_NETFILTER_XT_MATCH_LIMIT=m
CONFIG_NETFILTER_XT_MATCH_MAC=m
CONFIG_NETFILTER_XT_MATCH_MARK=m
CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
CONFIG_NETFILTER_XT_MATCH_OWNER=m
CONFIG_NETFILTER_XT_MATCH_POLICY=m
CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m
CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
CONFIG_NETFILTER_XT_MATCH_QUOTA=m
CONFIG_NETFILTER_XT_MATCH_RATEEST=m
CONFIG_NETFILTER_XT_MATCH_REALM=m
CONFIG_NETFILTER_XT_MATCH_RECENT=m
# CONFIG_NETFILTER_XT_MATCH_RECENT_PROC_COMPAT is not set
CONFIG_NETFILTER_XT_MATCH_SCTP=m
CONFIG_NETFILTER_XT_MATCH_SOCKET=m
CONFIG_NETFILTER_XT_MATCH_STATE=m
CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
CONFIG_NETFILTER_XT_MATCH_STRING=m
CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
CONFIG_NETFILTER_XT_MATCH_TIME=m
CONFIG_NETFILTER_XT_MATCH_U32=m
CONFIG_IP_VS=m
# CONFIG_IP_VS_IPV6 is not set
# CONFIG_IP_VS_DEBUG is not set
CONFIG_IP_VS_TAB_BITS=12

#
# IPVS transport protocol load balancing support
#
CONFIG_IP_VS_PROTO_TCP=y
CONFIG_IP_VS_PROTO_UDP=y
CONFIG_IP_VS_PROTO_AH_ESP=y
CONFIG_IP_VS_PROTO_ESP=y
CONFIG_IP_VS_PROTO_AH=y

#
# IPVS scheduler
#
CONFIG_IP_VS_RR=m
CONFIG_IP_VS_WRR=m
CONFIG_IP_VS_LC=m
CONFIG_IP_VS_WLC=m
CONFIG_IP_VS_LBLC=m
CONFIG_IP_VS_LBLCR=m
CONFIG_IP_VS_DH=m
CONFIG_IP_VS_SH=m
CONFIG_IP_VS_SED=m
CONFIG_IP_VS_NQ=m

#
# IPVS application helper
#
CONFIG_IP_VS_FTP=m

#
# IP: Netfilter Configuration
#
CONFIG_NF_DEFRAG_IPV4=m
CONFIG_NF_CONNTRACK_IPV4=m
# CONFIG_NF_CONNTRACK_PROC_COMPAT is not set
CONFIG_IP_NF_QUEUE=m
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_ADDRTYPE=m
CONFIG_IP_NF_MATCH_AH=m
CONFIG_IP_NF_MATCH_ECN=m
CONFIG_IP_NF_MATCH_TTL=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_LOG=m
CONFIG_IP_NF_TARGET_ULOG=m
CONFIG_NF_NAT=m
CONFIG_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=m
CONFIG_IP_NF_TARGET_NETMAP=m
CONFIG_IP_NF_TARGET_REDIRECT=m
CONFIG_NF_NAT_SNMP_BASIC=m
CONFIG_NF_NAT_PROTO_DCCP=m
CONFIG_NF_NAT_PROTO_GRE=m
CONFIG_NF_NAT_PROTO_UDPLITE=m
CONFIG_NF_NAT_PROTO_SCTP=m
CONFIG_NF_NAT_FTP=m
CONFIG_NF_NAT_IRC=m
CONFIG_NF_NAT_TFTP=m
CONFIG_NF_NAT_AMANDA=m
CONFIG_NF_NAT_PPTP=m
CONFIG_NF_NAT_H323=m
CONFIG_NF_NAT_SIP=m
CONFIG_IP_NF_MANGLE=m
CONFIG_IP_NF_TARGET_CLUSTERIP=m
CONFIG_IP_NF_TARGET_ECN=m
CONFIG_IP_NF_TARGET_TTL=m
CONFIG_IP_NF_RAW=m
CONFIG_IP_NF_SECURITY=m
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m

#
# IPv6: Netfilter Configuration
#
CONFIG_NF_CONNTRACK_IPV6=m
CONFIG_IP6_NF_QUEUE=m
CONFIG_IP6_NF_IPTABLES=m
CONFIG_IP6_NF_MATCH_AH=m
CONFIG_IP6_NF_MATCH_EUI64=m
CONFIG_IP6_NF_MATCH_FRAG=m
CONFIG_IP6_NF_MATCH_OPTS=m
CONFIG_IP6_NF_MATCH_HL=m
CONFIG_IP6_NF_MATCH_IPV6HEADER=m
CONFIG_IP6_NF_MATCH_MH=m
CONFIG_IP6_NF_MATCH_RT=m
CONFIG_IP6_NF_TARGET_LOG=m
CONFIG_IP6_NF_FILTER=m
CONFIG_IP6_NF_TARGET_REJECT=m
CONFIG_IP6_NF_MANGLE=m
CONFIG_IP6_NF_TARGET_HL=m
CONFIG_IP6_NF_RAW=m
CONFIG_IP6_NF_SECURITY=m
CONFIG_BRIDGE_NF_EBTABLES=m
CONFIG_BRIDGE_EBT_BROUTE=m
CONFIG_BRIDGE_EBT_T_FILTER=m
CONFIG_BRIDGE_EBT_T_NAT=m
CONFIG_BRIDGE_EBT_802_3=m
CONFIG_BRIDGE_EBT_AMONG=m
CONFIG_BRIDGE_EBT_ARP=m
CONFIG_BRIDGE_EBT_IP=m
CONFIG_BRIDGE_EBT_IP6=m
CONFIG_BRIDGE_EBT_LIMIT=m
CONFIG_BRIDGE_EBT_MARK=m
CONFIG_BRIDGE_EBT_PKTTYPE=m
CONFIG_BRIDGE_EBT_STP=m
CONFIG_BRIDGE_EBT_VLAN=m
CONFIG_BRIDGE_EBT_ARPREPLY=m
CONFIG_BRIDGE_EBT_DNAT=m
CONFIG_BRIDGE_EBT_MARK_T=m
CONFIG_BRIDGE_EBT_REDIRECT=m
CONFIG_BRIDGE_EBT_SNAT=m
CONFIG_BRIDGE_EBT_LOG=m
CONFIG_BRIDGE_EBT_ULOG=m
# CONFIG_BRIDGE_EBT_NFLOG is not set
CONFIG_IP_DCCP=y
CONFIG_INET_DCCP_DIAG=y

#
# DCCP CCIDs Configuration (EXPERIMENTAL)
#
# CONFIG_IP_DCCP_CCID2_DEBUG is not set
CONFIG_IP_DCCP_CCID3=y
# CONFIG_IP_DCCP_CCID3_DEBUG is not set
CONFIG_IP_DCCP_CCID3_RTO=100
CONFIG_IP_DCCP_TFRC_LIB=y

#
# DCCP Kernel Hacking
#
# CONFIG_IP_DCCP_DEBUG is not set
CONFIG_NET_DCCPPROBE=m
CONFIG_IP_SCTP=y
# CONFIG_SCTP_DBG_MSG is not set
# CONFIG_SCTP_DBG_OBJCNT is not set
# CONFIG_SCTP_HMAC_NONE is not set
# CONFIG_SCTP_HMAC_SHA1 is not set
CONFIG_SCTP_HMAC_MD5=y
CONFIG_TIPC=y
# CONFIG_TIPC_ADVANCED is not set
# CONFIG_TIPC_DEBUG is not set
# CONFIG_ATM is not set
CONFIG_STP=y
CONFIG_BRIDGE=y
# CONFIG_NET_DSA is not set
CONFIG_VLAN_8021Q=y
# CONFIG_VLAN_8021Q_GVRP is not set
# CONFIG_DECNET is not set
CONFIG_LLC=y
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
CONFIG_NET_SCHED=y

#
# Queueing/Scheduling
#
CONFIG_NET_SCH_CBQ=y
CONFIG_NET_SCH_HTB=y
CONFIG_NET_SCH_HFSC=y
CONFIG_NET_SCH_PRIO=y
CONFIG_NET_SCH_MULTIQ=y
CONFIG_NET_SCH_RED=y
CONFIG_NET_SCH_SFQ=y
CONFIG_NET_SCH_TEQL=y
CONFIG_NET_SCH_TBF=y
CONFIG_NET_SCH_GRED=y
CONFIG_NET_SCH_DSMARK=y
CONFIG_NET_SCH_NETEM=y
CONFIG_NET_SCH_DRR=y
CONFIG_NET_SCH_INGRESS=y

#
# Classification
#
CONFIG_NET_CLS=y
CONFIG_NET_CLS_BASIC=y
CONFIG_NET_CLS_TCINDEX=y
CONFIG_NET_CLS_ROUTE4=y
CONFIG_NET_CLS_ROUTE=y
CONFIG_NET_CLS_FW=y
CONFIG_NET_CLS_U32=y
CONFIG_CLS_U32_PERF=y
CONFIG_CLS_U32_MARK=y
CONFIG_NET_CLS_RSVP=y
CONFIG_NET_CLS_RSVP6=y
CONFIG_NET_CLS_FLOW=y
CONFIG_NET_CLS_CGROUP=y
CONFIG_NET_EMATCH=y
CONFIG_NET_EMATCH_STACK=32
CONFIG_NET_EMATCH_CMP=y
CONFIG_NET_EMATCH_NBYTE=y
CONFIG_NET_EMATCH_U32=y
CONFIG_NET_EMATCH_META=y
CONFIG_NET_EMATCH_TEXT=y
CONFIG_NET_CLS_ACT=y
CONFIG_NET_ACT_POLICE=y
CONFIG_NET_ACT_GACT=y
CONFIG_GACT_PROB=y
CONFIG_NET_ACT_MIRRED=y
CONFIG_NET_ACT_IPT=m
CONFIG_NET_ACT_NAT=y
CONFIG_NET_ACT_PEDIT=y
CONFIG_NET_ACT_SIMP=y
CONFIG_NET_ACT_SKBEDIT=y
CONFIG_NET_CLS_IND=y
CONFIG_NET_SCH_FIFO=y
CONFIG_DCB=y

#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_NET_TCPPROBE is not set
# CONFIG_HAMRADIO is not set
# CONFIG_CAN is not set
CONFIG_IRDA=y

#
# IrDA protocols
#
CONFIG_IRLAN=y
# CONFIG_IRNET is not set
CONFIG_IRCOMM=y
# CONFIG_IRDA_ULTRA is not set

#
# IrDA options
#
CONFIG_IRDA_CACHE_LAST_LSAP=y
CONFIG_IRDA_FAST_RR=y
# CONFIG_IRDA_DEBUG is not set

#
# Infrared-port device drivers
#

#
# SIR device drivers
#
# CONFIG_IRTTY_SIR is not set

#
# Dongle support
#
# CONFIG_KINGSUN_DONGLE is not set
# CONFIG_KSDAZZLE_DONGLE is not set
# CONFIG_KS959_DONGLE is not set

#
# FIR device drivers
#
# CONFIG_USB_IRDA is not set
# CONFIG_SIGMATEL_FIR is not set
# CONFIG_NSC_FIR is not set
# CONFIG_WINBOND_FIR is not set
# CONFIG_TOSHIBA_FIR is not set
# CONFIG_SMC_IRCC_FIR is not set
# CONFIG_ALI_FIR is not set
# CONFIG_VLSI_FIR is not set
# CONFIG_VIA_FIR is not set
# CONFIG_MCS_FIR is not set
CONFIG_BT=y
CONFIG_BT_L2CAP=y
CONFIG_BT_SCO=y
CONFIG_BT_RFCOMM=y
CONFIG_BT_RFCOMM_TTY=y
CONFIG_BT_BNEP=y
CONFIG_BT_BNEP_MC_FILTER=y
CONFIG_BT_BNEP_PROTO_FILTER=y
CONFIG_BT_HIDP=y

#
# Bluetooth device drivers
#
CONFIG_BT_HCIBTUSB=y
# CONFIG_BT_HCIUART is not set
# CONFIG_BT_HCIBCM203X is not set
# CONFIG_BT_HCIBPA10X is not set
# CONFIG_BT_HCIBFUSB is not set
# CONFIG_BT_HCIVHCI is not set
# CONFIG_AF_RXRPC is not set
# CONFIG_PHONET is not set
CONFIG_FIB_RULES=y
CONFIG_WIRELESS=y
CONFIG_CFG80211=m
# CONFIG_CFG80211_REG_DEBUG is not set
CONFIG_NL80211=y
# CONFIG_WIRELESS_OLD_REGULATORY is not set
CONFIG_WIRELESS_EXT=y
CONFIG_WIRELESS_EXT_SYSFS=y
CONFIG_LIB80211=y
CONFIG_MAC80211=m

#
# Rate control algorithm selection
#
CONFIG_MAC80211_RC_MINSTREL=y
# CONFIG_MAC80211_RC_DEFAULT_PID is not set
CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
CONFIG_MAC80211_RC_DEFAULT="minstrel"
CONFIG_MAC80211_MESH=y
CONFIG_MAC80211_LEDS=y
CONFIG_MAC80211_DEBUGFS=y
# CONFIG_MAC80211_DEBUG_MENU is not set
# CONFIG_WIMAX is not set
CONFIG_RFKILL=y
CONFIG_RFKILL_INPUT=m
CONFIG_RFKILL_LEDS=y

#
# Device Drivers
#

#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
CONFIG_FIRMWARE_IN_KERNEL=y
CONFIG_EXTRA_FIRMWARE=""
# CONFIG_DEBUG_DRIVER is not set
CONFIG_DEBUG_DEVRES=y
# CONFIG_SYS_HYPERVISOR is not set
CONFIG_CONNECTOR=y
CONFIG_PROC_EVENTS=y
CONFIG_MTD=y
# CONFIG_MTD_DEBUG is not set
# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_REDBOOT_PARTS is not set
# CONFIG_MTD_CMDLINE_PARTS is not set
# CONFIG_MTD_AR7_PARTS is not set

#
# User Modules And Translation Layers
#
# CONFIG_MTD_CHAR is not set
CONFIG_MTD_BLKDEVS=m
CONFIG_MTD_BLOCK=m
CONFIG_MTD_BLOCK_RO=m
CONFIG_FTL=m
CONFIG_NFTL=m
CONFIG_NFTL_RW=y
CONFIG_INFTL=m
CONFIG_RFD_FTL=m
CONFIG_SSFDC=m
CONFIG_MTD_OOPS=m

#
# RAM/ROM/Flash chip drivers
#
CONFIG_MTD_CFI=m
CONFIG_MTD_JEDECPROBE=m
CONFIG_MTD_GEN_PROBE=m
# CONFIG_MTD_CFI_ADV_OPTIONS is not set
CONFIG_MTD_MAP_BANK_WIDTH_1=y
CONFIG_MTD_MAP_BANK_WIDTH_2=y
CONFIG_MTD_MAP_BANK_WIDTH_4=y
# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
CONFIG_MTD_CFI_I1=y
CONFIG_MTD_CFI_I2=y
# CONFIG_MTD_CFI_I4 is not set
# CONFIG_MTD_CFI_I8 is not set
CONFIG_MTD_CFI_INTELEXT=m
CONFIG_MTD_CFI_AMDSTD=m
CONFIG_MTD_CFI_STAA=m
CONFIG_MTD_CFI_UTIL=m
CONFIG_MTD_RAM=m
CONFIG_MTD_ROM=m
CONFIG_MTD_ABSENT=m

#
# Mapping drivers for chip access
#
CONFIG_MTD_COMPLEX_MAPPINGS=y
# CONFIG_MTD_PHYSMAP is not set
CONFIG_MTD_NETSC520=m
CONFIG_MTD_TS5500=m
# CONFIG_MTD_SBC_GXX is not set
# CONFIG_MTD_AMD76XROM is not set
# CONFIG_MTD_ICHXROM is not set
CONFIG_MTD_ESB2ROM=m
CONFIG_MTD_CK804XROM=m
CONFIG_MTD_SCB2_FLASH=m
# CONFIG_MTD_NETtel is not set
# CONFIG_MTD_L440GX is not set
CONFIG_MTD_PCI=m
# CONFIG_MTD_INTEL_VR_NOR is not set
# CONFIG_MTD_PLATRAM is not set

#
# Self-contained MTD device drivers
#
CONFIG_MTD_PMC551=m
# CONFIG_MTD_PMC551_BUGFIX is not set
# CONFIG_MTD_PMC551_DEBUG is not set
# CONFIG_MTD_SLRAM is not set
# CONFIG_MTD_PHRAM is not set
CONFIG_MTD_MTDRAM=m
CONFIG_MTDRAM_TOTAL_SIZE=4096
CONFIG_MTDRAM_ERASE_SIZE=128
CONFIG_MTD_BLOCK2MTD=m

#
# Disk-On-Chip Device Drivers
#
# CONFIG_MTD_DOC2000 is not set
# CONFIG_MTD_DOC2001 is not set
# CONFIG_MTD_DOC2001PLUS is not set
CONFIG_MTD_NAND=m
# CONFIG_MTD_NAND_VERIFY_WRITE is not set
CONFIG_MTD_NAND_ECC_SMC=y
# CONFIG_MTD_NAND_MUSEUM_IDS is not set
CONFIG_MTD_NAND_IDS=m
CONFIG_MTD_NAND_DISKONCHIP=m
# CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADVANCED is not set
CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADDRESS=0
# CONFIG_MTD_NAND_DISKONCHIP_BBTWRITE is not set
CONFIG_MTD_NAND_CAFE=m
CONFIG_MTD_NAND_CS553X=m
CONFIG_MTD_NAND_NANDSIM=m
# CONFIG_MTD_NAND_PLATFORM is not set
CONFIG_MTD_ALAUDA=m
# CONFIG_MTD_ONENAND is not set

#
# LPDDR flash memory drivers
#
# CONFIG_MTD_LPDDR is not set

#
# UBI - Unsorted block images
#
CONFIG_MTD_UBI=m
CONFIG_MTD_UBI_WL_THRESHOLD=4096
CONFIG_MTD_UBI_BEB_RESERVE=1
# CONFIG_MTD_UBI_GLUEBI is not set

#
# UBI debugging options
#
# CONFIG_MTD_UBI_DEBUG is not set
# CONFIG_PARPORT is not set
CONFIG_PNP=y
CONFIG_PNP_DEBUG_MESSAGES=y

#
# Protocols
#
CONFIG_PNPACPI=y
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_CRYPTOLOOP=y
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=16384
# CONFIG_BLK_DEV_XIP is not set
CONFIG_CDROM_PKTCDVD=y
CONFIG_CDROM_PKTCDVD_BUFFERS=8
# CONFIG_CDROM_PKTCDVD_WCACHE is not set
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_VIRTIO_BLK is not set
# CONFIG_BLK_DEV_HD is not set
# CONFIG_MISC_DEVICES is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set

#
# SCSI device support
#
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
CONFIG_SCSI_TGT=y
# CONFIG_SCSI_NETLINK is not set
# CONFIG_SCSI_PROC_FS is not set

#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
CONFIG_BLK_DEV_SR=y
CONFIG_BLK_DEV_SR_VENDOR=y
CONFIG_CHR_DEV_SG=y
CONFIG_CHR_DEV_SCH=y

#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
CONFIG_SCSI_MULTI_LUN=y
# CONFIG_SCSI_CONSTANTS is not set
CONFIG_SCSI_LOGGING=y
CONFIG_SCSI_SCAN_ASYNC=y
CONFIG_SCSI_WAIT_SCAN=m

#
# SCSI Transports
#
# CONFIG_SCSI_SPI_ATTRS is not set
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
# CONFIG_SCSI_SAS_ATTRS is not set
# CONFIG_SCSI_SAS_LIBSAS is not set
# CONFIG_SCSI_SRP_ATTRS is not set
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_AIC94XX is not set
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_ARCMSR is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_LIBFC is not set
# CONFIG_FCOE is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_STEX is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
# CONFIG_SCSI_QLA_FC is not set
# CONFIG_SCSI_QLA_ISCSI is not set
# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_SRP is not set
# CONFIG_SCSI_DH is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_ATA_ACPI=y
CONFIG_SATA_PMP=y
CONFIG_SATA_AHCI=y
# CONFIG_SATA_SIL24 is not set
CONFIG_ATA_SFF=y
# CONFIG_SATA_SVW is not set
CONFIG_ATA_PIIX=y
# CONFIG_SATA_MV is not set
# CONFIG_SATA_NV is not set
# CONFIG_PDC_ADMA is not set
# CONFIG_SATA_QSTOR is not set
# CONFIG_SATA_PROMISE is not set
# CONFIG_SATA_SX4 is not set
# CONFIG_SATA_SIL is not set
# CONFIG_SATA_SIS is not set
# CONFIG_SATA_ULI is not set
# CONFIG_SATA_VIA is not set
# CONFIG_SATA_VITESSE is not set
# CONFIG_SATA_INIC162X is not set
# CONFIG_PATA_ACPI is not set
# CONFIG_PATA_ALI is not set
# CONFIG_PATA_AMD is not set
# CONFIG_PATA_ARTOP is not set
# CONFIG_PATA_ATIIXP is not set
# CONFIG_PATA_CMD640_PCI is not set
# CONFIG_PATA_CMD64X is not set
# CONFIG_PATA_CS5520 is not set
# CONFIG_PATA_CS5530 is not set
# CONFIG_PATA_CS5535 is not set
# CONFIG_PATA_CS5536 is not set
# CONFIG_PATA_CYPRESS is not set
# CONFIG_PATA_EFAR is not set
CONFIG_ATA_GENERIC=y
# CONFIG_PATA_HPT366 is not set
# CONFIG_PATA_HPT37X is not set
# CONFIG_PATA_HPT3X2N is not set
# CONFIG_PATA_HPT3X3 is not set
# CONFIG_PATA_IT821X is not set
# CONFIG_PATA_IT8213 is not set
# CONFIG_PATA_JMICRON is not set
# CONFIG_PATA_TRIFLEX is not set
# CONFIG_PATA_MARVELL is not set
# CONFIG_PATA_MPIIX is not set
# CONFIG_PATA_OLDPIIX is not set
# CONFIG_PATA_NETCELL is not set
# CONFIG_PATA_NINJA32 is not set
# CONFIG_PATA_NS87410 is not set
# CONFIG_PATA_NS87415 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_OPTIDMA is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_RADISYS is not set
# CONFIG_PATA_RZ1000 is not set
# CONFIG_PATA_SC1200 is not set
# CONFIG_PATA_SERVERWORKS is not set
# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_SIL680 is not set
# CONFIG_PATA_SIS is not set
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set
# CONFIG_PATA_SCH is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=m
CONFIG_MD_LINEAR=m
CONFIG_MD_RAID0=m
CONFIG_MD_RAID1=m
CONFIG_MD_RAID10=m
CONFIG_MD_RAID456=m
CONFIG_MD_RAID5_RESHAPE=y
CONFIG_MD_MULTIPATH=m
CONFIG_MD_FAULTY=m
CONFIG_BLK_DEV_DM=y
CONFIG_DM_DEBUG=y
CONFIG_DM_CRYPT=y
CONFIG_DM_SNAPSHOT=y
CONFIG_DM_MIRROR=y
CONFIG_DM_ZERO=y
CONFIG_DM_MULTIPATH=y
CONFIG_DM_DELAY=y
CONFIG_DM_UEVENT=y
# CONFIG_FUSION is not set

#
# IEEE 1394 (FireWire) support
#

#
# Enable only one of the two stacks, unless you know what you are doing
#
CONFIG_FIREWIRE=y
CONFIG_FIREWIRE_OHCI=y
CONFIG_FIREWIRE_OHCI_DEBUG=y
# CONFIG_FIREWIRE_SBP2 is not set
# CONFIG_IEEE1394 is not set
CONFIG_I2O=y
# CONFIG_I2O_LCT_NOTIFY_ON_CHANGES is not set
CONFIG_I2O_EXT_ADAPTEC=y
CONFIG_I2O_CONFIG=y
CONFIG_I2O_CONFIG_OLD_IOCTL=y
CONFIG_I2O_BUS=y
CONFIG_I2O_BLOCK=y
CONFIG_I2O_SCSI=y
CONFIG_I2O_PROC=y
CONFIG_MACINTOSH_DRIVERS=y
CONFIG_MAC_EMUMOUSEBTN=y
CONFIG_NETDEVICES=y
CONFIG_IFB=y
CONFIG_DUMMY=y
CONFIG_BONDING=m
CONFIG_MACVLAN=m
CONFIG_EQUALIZER=m
CONFIG_TUN=y
CONFIG_VETH=m
# CONFIG_NET_SB1000 is not set
# CONFIG_ARCNET is not set
# CONFIG_NET_ETHERNET is not set
CONFIG_MII=y
CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_E1000E is not set
# CONFIG_IP1000 is not set
# CONFIG_IGB is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
CONFIG_SKY2=y
# CONFIG_SKY2_DEBUG is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
# CONFIG_JME is not set
# CONFIG_NETDEV_10000 is not set
# CONFIG_TR is not set

#
# Wireless LAN
#
# CONFIG_WLAN_PRE80211 is not set
CONFIG_WLAN_80211=y
# CONFIG_LIBERTAS is not set
# CONFIG_LIBERTAS_THINFIRM is not set
# CONFIG_AIRO is not set
# CONFIG_HERMES is not set
# CONFIG_ATMEL is not set
# CONFIG_PRISM54 is not set
# CONFIG_USB_ZD1201 is not set
CONFIG_USB_NET_RNDIS_WLAN=y
# CONFIG_RTL8180 is not set
# CONFIG_RTL8187 is not set
# CONFIG_ADM8211 is not set
# CONFIG_MAC80211_HWSIM is not set
# CONFIG_P54_COMMON is not set
CONFIG_ATH5K=m
# CONFIG_ATH5K_DEBUG is not set
# CONFIG_ATH9K is not set
# CONFIG_IPW2100 is not set
# CONFIG_IPW2200 is not set
# CONFIG_IWLCORE is not set
# CONFIG_IWLWIFI_LEDS is not set
# CONFIG_IWLAGN is not set
# CONFIG_IWL3945 is not set
# CONFIG_HOSTAP is not set
# CONFIG_B43 is not set
# CONFIG_B43LEGACY is not set
# CONFIG_ZD1211RW is not set

#
# Enable WiMAX (Networking options) to see the WiMAX drivers
#

#
# USB Network Adapters
#
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
CONFIG_USB_USBNET=y
# CONFIG_USB_NET_AX8817X is not set
CONFIG_USB_NET_CDCETHER=y
# CONFIG_USB_NET_DM9601 is not set
# CONFIG_USB_NET_SMSC95XX is not set
# CONFIG_USB_NET_GL620A is not set
# CONFIG_USB_NET_NET1080 is not set
# CONFIG_USB_NET_PLUSB is not set
# CONFIG_USB_NET_MCS7830 is not set
CONFIG_USB_NET_RNDIS_HOST=y
# CONFIG_USB_NET_CDC_SUBSET is not set
# CONFIG_USB_NET_ZAURUS is not set
# CONFIG_USB_HSO is not set
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
CONFIG_PPP=y
CONFIG_PPP_MULTILINK=y
CONFIG_PPP_FILTER=y
CONFIG_PPP_ASYNC=y
CONFIG_PPP_SYNC_TTY=y
CONFIG_PPP_DEFLATE=y
# CONFIG_PPP_BSDCOMP is not set
CONFIG_PPP_MPPE=y
CONFIG_PPPOE=y
CONFIG_PPPOL2TP=y
# CONFIG_SLIP is not set
CONFIG_SLHC=y
# CONFIG_NET_FC is not set
CONFIG_NETCONSOLE=y
CONFIG_NETCONSOLE_DYNAMIC=y
CONFIG_NETPOLL=y
CONFIG_NETPOLL_TRAP=y
CONFIG_NET_POLL_CONTROLLER=y
# CONFIG_VIRTIO_NET is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set

#
# Input device support
#
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
CONFIG_INPUT_POLLDEV=y

#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
CONFIG_INPUT_JOYDEV=y
CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set

#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
CONFIG_INPUT_MOUSE=y
# CONFIG_MOUSE_PS2 is not set
# CONFIG_MOUSE_SERIAL is not set
CONFIG_MOUSE_APPLETOUCH=y
CONFIG_MOUSE_BCM5974=y
# CONFIG_MOUSE_VSXXXAA is not set
CONFIG_INPUT_JOYSTICK=y
# CONFIG_JOYSTICK_ANALOG is not set
# CONFIG_JOYSTICK_A3D is not set
# CONFIG_JOYSTICK_ADI is not set
# CONFIG_JOYSTICK_COBRA is not set
# CONFIG_JOYSTICK_GF2K is not set
# CONFIG_JOYSTICK_GRIP is not set
# CONFIG_JOYSTICK_GRIP_MP is not set
# CONFIG_JOYSTICK_GUILLEMOT is not set
# CONFIG_JOYSTICK_INTERACT is not set
# CONFIG_JOYSTICK_SIDEWINDER is not set
# CONFIG_JOYSTICK_TMDC is not set
# CONFIG_JOYSTICK_IFORCE is not set
# CONFIG_JOYSTICK_WARRIOR is not set
# CONFIG_JOYSTICK_MAGELLAN is not set
# CONFIG_JOYSTICK_SPACEORB is not set
# CONFIG_JOYSTICK_SPACEBALL is not set
# CONFIG_JOYSTICK_STINGER is not set
# CONFIG_JOYSTICK_TWIDJOY is not set
# CONFIG_JOYSTICK_ZHENHUA is not set
# CONFIG_JOYSTICK_JOYDUMP is not set
# CONFIG_JOYSTICK_XPAD is not set
CONFIG_INPUT_TABLET=y
# CONFIG_TABLET_USB_ACECAD is not set
# CONFIG_TABLET_USB_AIPTEK is not set
# CONFIG_TABLET_USB_GTCO is not set
# CONFIG_TABLET_USB_KBTAB is not set
# CONFIG_TABLET_USB_WACOM is not set
CONFIG_INPUT_TOUCHSCREEN=y
# CONFIG_TOUCHSCREEN_FUJITSU is not set
# CONFIG_TOUCHSCREEN_GUNZE is not set
# CONFIG_TOUCHSCREEN_ELO is not set
# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
# CONFIG_TOUCHSCREEN_MTOUCH is not set
# CONFIG_TOUCHSCREEN_INEXIO is not set
# CONFIG_TOUCHSCREEN_MK712 is not set
# CONFIG_TOUCHSCREEN_PENMOUNT is not set
# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
# CONFIG_TOUCHSCREEN_TSC2007 is not set
CONFIG_INPUT_MISC=y
CONFIG_INPUT_PCSPKR=y
# CONFIG_INPUT_APANEL is not set
# CONFIG_INPUT_WISTRON_BTNS is not set
# CONFIG_INPUT_ATLAS_BTNS is not set
# CONFIG_INPUT_ATI_REMOTE is not set
# CONFIG_INPUT_ATI_REMOTE2 is not set
# CONFIG_INPUT_KEYSPAN_REMOTE is not set
# CONFIG_INPUT_POWERMATE is not set
# CONFIG_INPUT_YEALINK is not set
# CONFIG_INPUT_CM109 is not set
# CONFIG_INPUT_UINPUT is not set

#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
# CONFIG_SERIO_SERPORT is not set
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
# CONFIG_GAMEPORT is not set

#
# Character devices
#
CONFIG_VT=y
CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
# CONFIG_DEVKMEM is not set
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_NOZOMI is not set

#
# Serial drivers
#
# CONFIG_SERIAL_8250 is not set
CONFIG_FIX_EARLYCON_MEM=y

#
# Non-8250 serial port support
#
# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
# CONFIG_LEGACY_PTYS is not set
# CONFIG_VIRTIO_CONSOLE is not set
CONFIG_IPMI_HANDLER=y
# CONFIG_IPMI_PANIC_EVENT is not set
CONFIG_IPMI_DEVICE_INTERFACE=y
CONFIG_IPMI_SI=y
CONFIG_IPMI_WATCHDOG=y
CONFIG_IPMI_POWEROFF=y
CONFIG_HW_RANDOM=y
CONFIG_HW_RANDOM_INTEL=y
# CONFIG_HW_RANDOM_AMD is not set
# CONFIG_HW_RANDOM_GEODE is not set
# CONFIG_HW_RANDOM_VIA is not set
# CONFIG_HW_RANDOM_VIRTIO is not set
CONFIG_NVRAM=y
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_SONYPI is not set
# CONFIG_MWAVE is not set
# CONFIG_PC8736x_GPIO is not set
# CONFIG_NSC_GPIO is not set
# CONFIG_CS5535_GPIO is not set
# CONFIG_RAW_DRIVER is not set
CONFIG_HPET=y
# CONFIG_HPET_MMAP is not set
CONFIG_HANGCHECK_TIMER=y
CONFIG_TCG_TPM=y
# CONFIG_TCG_TIS is not set
# CONFIG_TCG_NSC is not set
# CONFIG_TCG_ATMEL is not set
CONFIG_TCG_INFINEON=y
# CONFIG_TELCLOCK is not set
CONFIG_DEVPORT=y
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_HELPER_AUTO=y
CONFIG_I2C_ALGOBIT=y

#
# I2C Hardware Bus support
#

#
# PC SMBus host controller drivers
#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not set
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not set
CONFIG_I2C_I801=y
CONFIG_I2C_ISCH=y
CONFIG_I2C_PIIX4=y
# CONFIG_I2C_NFORCE2 is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set

#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_SIMTEC is not set

#
# External I2C/SMBus adapter drivers
#
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_TAOS_EVM is not set
# CONFIG_I2C_TINY_USB is not set

#
# Graphics adapter I2C/DDC channel drivers
#
# CONFIG_I2C_VOODOO3 is not set

#
# Other I2C/SMBus bus drivers
#
# CONFIG_I2C_PCA_PLATFORM is not set
# CONFIG_I2C_STUB is not set
# CONFIG_SCx200_ACB is not set

#
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
# CONFIG_SPI is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
# CONFIG_GPIOLIB is not set
# CONFIG_W1 is not set
CONFIG_POWER_SUPPLY=y
# CONFIG_POWER_SUPPLY_DEBUG is not set
# CONFIG_PDA_POWER is not set
# CONFIG_BATTERY_DS2760 is not set
# CONFIG_BATTERY_BQ27x00 is not set
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
# CONFIG_SENSORS_ABITUGURU is not set
# CONFIG_SENSORS_ABITUGURU3 is not set
# CONFIG_SENSORS_AD7414 is not set
# CONFIG_SENSORS_AD7418 is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1026 is not set
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
# CONFIG_SENSORS_ADT7462 is not set
# CONFIG_SENSORS_ADT7470 is not set
# CONFIG_SENSORS_ADT7473 is not set
# CONFIG_SENSORS_ADT7475 is not set
# CONFIG_SENSORS_K8TEMP is not set
# CONFIG_SENSORS_ASB100 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_I5K_AMB is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_F75375S is not set
# CONFIG_SENSORS_FSCHER is not set
# CONFIG_SENSORS_FSCPOS is not set
# CONFIG_SENSORS_FSCHMD is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
CONFIG_SENSORS_CORETEMP=y
# CONFIG_SENSORS_IBMAEM is not set
# CONFIG_SENSORS_IBMPEX is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM63 is not set
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
# CONFIG_SENSORS_LM80 is not set
# CONFIG_SENSORS_LM83 is not set
# CONFIG_SENSORS_LM85 is not set
# CONFIG_SENSORS_LM87 is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_LM93 is not set
# CONFIG_SENSORS_LTC4245 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_DME1737 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_ADS7828 is not set
# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_VT8231 is not set
# CONFIG_SENSORS_W83781D is not set
# CONFIG_SENSORS_W83791D is not set
# CONFIG_SENSORS_W83792D is not set
# CONFIG_SENSORS_W83793 is not set
# CONFIG_SENSORS_W83L785TS is not set
# CONFIG_SENSORS_W83L786NG is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_SENSORS_HDAPS is not set
# CONFIG_SENSORS_LIS3LV02D is not set
CONFIG_SENSORS_APPLESMC=y
# CONFIG_HWMON_DEBUG_CHIP is not set
CONFIG_THERMAL=y
CONFIG_THERMAL_HWMON=y
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set

#
# Watchdog Device Drivers
#
# CONFIG_SOFT_WATCHDOG is not set
# CONFIG_ACQUIRE_WDT is not set
# CONFIG_ADVANTECH_WDT is not set
# CONFIG_ALIM1535_WDT is not set
# CONFIG_ALIM7101_WDT is not set
# CONFIG_SC520_WDT is not set
# CONFIG_EUROTECH_WDT is not set
# CONFIG_IB700_WDT is not set
# CONFIG_IBMASR is not set
# CONFIG_WAFER_WDT is not set
# CONFIG_I6300ESB_WDT is not set
CONFIG_ITCO_WDT=y
# CONFIG_ITCO_VENDOR_SUPPORT is not set
# CONFIG_IT8712F_WDT is not set
# CONFIG_IT87_WDT is not set
# CONFIG_HP_WATCHDOG is not set
# CONFIG_SC1200_WDT is not set
# CONFIG_PC87413_WDT is not set
# CONFIG_60XX_WDT is not set
# CONFIG_SBC8360_WDT is not set
# CONFIG_SBC7240_WDT is not set
# CONFIG_CPU5_WDT is not set
# CONFIG_SMSC_SCH311X_WDT is not set
# CONFIG_SMSC37B787_WDT is not set
# CONFIG_W83627HF_WDT is not set
# CONFIG_W83697HF_WDT is not set
# CONFIG_W83697UG_WDT is not set
# CONFIG_W83877F_WDT is not set
# CONFIG_W83977F_WDT is not set
# CONFIG_MACHZ_WDT is not set
# CONFIG_SBC_EPX_C3_WATCHDOG is not set

#
# PCI-based Watchdog Cards
#
# CONFIG_PCIPCWATCHDOG is not set
# CONFIG_WDTPCI is not set

#
# USB-based Watchdog Cards
#
# CONFIG_USBPCWATCHDOG is not set
CONFIG_SSB_POSSIBLE=y

#
# Sonics Silicon Backplane
#
# CONFIG_SSB is not set

#
# Multifunction device drivers
#
# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_REGULATOR is not set

#
# Multimedia devices
#

#
# Multimedia core support
#
CONFIG_VIDEO_DEV=y
CONFIG_VIDEO_V4L2_COMMON=y
# CONFIG_VIDEO_ALLOW_V4L1 is not set
CONFIG_VIDEO_V4L1_COMPAT=y
# CONFIG_DVB_CORE is not set
CONFIG_VIDEO_MEDIA=y

#
# Multimedia drivers
#
# CONFIG_MEDIA_ATTACH is not set
CONFIG_MEDIA_TUNER=y
# CONFIG_MEDIA_TUNER_CUSTOMIZE is not set
CONFIG_MEDIA_TUNER_SIMPLE=y
CONFIG_MEDIA_TUNER_TDA8290=y
CONFIG_MEDIA_TUNER_TDA9887=y
CONFIG_MEDIA_TUNER_TEA5761=y
CONFIG_MEDIA_TUNER_TEA5767=y
CONFIG_MEDIA_TUNER_MT20XX=y
CONFIG_MEDIA_TUNER_XC2028=y
CONFIG_MEDIA_TUNER_XC5000=y
CONFIG_VIDEO_V4L2=y
# CONFIG_VIDEO_CAPTURE_DRIVERS is not set
# CONFIG_RADIO_ADAPTERS is not set
# CONFIG_DAB is not set

#
# Graphics support
#
CONFIG_AGP=y
# CONFIG_AGP_ALI is not set
# CONFIG_AGP_ATI is not set
# CONFIG_AGP_AMD is not set
# CONFIG_AGP_AMD64 is not set
CONFIG_AGP_INTEL=y
# CONFIG_AGP_NVIDIA is not set
# CONFIG_AGP_SIS is not set
# CONFIG_AGP_SWORKS is not set
# CONFIG_AGP_VIA is not set
# CONFIG_AGP_EFFICEON is not set
CONFIG_DRM=y
# CONFIG_DRM_TDFX is not set
# CONFIG_DRM_R128 is not set
CONFIG_DRM_RADEON=y
# CONFIG_DRM_I810 is not set
# CONFIG_DRM_I830 is not set
# CONFIG_DRM_I915 is not set
# CONFIG_DRM_MGA is not set
# CONFIG_DRM_SIS is not set
# CONFIG_DRM_VIA is not set
# CONFIG_DRM_SAVAGE is not set
# CONFIG_VGASTATE is not set
CONFIG_VIDEO_OUTPUT_CONTROL=y
CONFIG_FB=y
# CONFIG_FIRMWARE_EDID is not set
# CONFIG_FB_DDC is not set
# CONFIG_FB_BOOT_VESA_SUPPORT is not set
# CONFIG_FB_CFB_FILLRECT is not set
# CONFIG_FB_CFB_COPYAREA is not set
# CONFIG_FB_CFB_IMAGEBLIT is not set
# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
# CONFIG_FB_SYS_FILLRECT is not set
# CONFIG_FB_SYS_COPYAREA is not set
# CONFIG_FB_SYS_IMAGEBLIT is not set
# CONFIG_FB_FOREIGN_ENDIAN is not set
# CONFIG_FB_SYS_FOPS is not set
# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not set
# CONFIG_FB_BACKLIGHT is not set
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_TILEBLITTING=y

#
# Frame buffer hardware drivers
#
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_ARC is not set
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
# CONFIG_FB_VGA16 is not set
# CONFIG_FB_UVESA is not set
# CONFIG_FB_VESA is not set
# CONFIG_FB_EFI is not set
# CONFIG_FB_N411 is not set
# CONFIG_FB_HGA is not set
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_NVIDIA is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_I810 is not set
# CONFIG_FB_LE80578 is not set
# CONFIG_FB_INTEL is not set
# CONFIG_FB_MATROX is not set
# CONFIG_FB_RADEON is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_S3 is not set
# CONFIG_FB_SAVAGE is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_VIA is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_VT8623 is not set
# CONFIG_FB_CYBLA is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_ARK is not set
# CONFIG_FB_PM3 is not set
# CONFIG_FB_CARMINE is not set
# CONFIG_FB_GEODE is not set
# CONFIG_FB_VIRTUAL is not set
# CONFIG_FB_METRONOME is not set
# CONFIG_FB_MB862XX is not set
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_LCD_CLASS_DEVICE=y
# CONFIG_LCD_ILI9320 is not set
CONFIG_LCD_PLATFORM=y
CONFIG_BACKLIGHT_CLASS_DEVICE=y
CONFIG_BACKLIGHT_GENERIC=y
# CONFIG_BACKLIGHT_PROGEAR is not set
# CONFIG_BACKLIGHT_MBP_NVIDIA is not set
# CONFIG_BACKLIGHT_SAHARA is not set

#
# Display device support
#
CONFIG_DISPLAY_SUPPORT=y

#
# Display hardware drivers
#

#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
CONFIG_VGACON_SOFT_SCROLLBACK=y
CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=64
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
CONFIG_LOGO=y
# CONFIG_LOGO_LINUX_MONO is not set
# CONFIG_LOGO_LINUX_VGA16 is not set
CONFIG_LOGO_LINUX_CLUT224=y
CONFIG_SOUND=y
# CONFIG_SOUND_OSS_CORE is not set
CONFIG_SND=y
CONFIG_SND_TIMER=y
CONFIG_SND_PCM=y
CONFIG_SND_HWDEP=y
CONFIG_SND_RAWMIDI=y
CONFIG_SND_JACK=y
CONFIG_SND_SEQUENCER=y
CONFIG_SND_SEQ_DUMMY=y
# CONFIG_SND_MIXER_OSS is not set
# CONFIG_SND_PCM_OSS is not set
# CONFIG_SND_SEQUENCER_OSS is not set
CONFIG_SND_HRTIMER=y
CONFIG_SND_SEQ_HRTIMER_DEFAULT=y
CONFIG_SND_DYNAMIC_MINORS=y
# CONFIG_SND_SUPPORT_OLD_API is not set
# CONFIG_SND_VERBOSE_PROCFS is not set
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
CONFIG_SND_VMASTER=y
CONFIG_SND_DRIVERS=y
# CONFIG_SND_PCSP is not set
CONFIG_SND_DUMMY=y
CONFIG_SND_VIRMIDI=y
# CONFIG_SND_SERIAL_U16550 is not set
# CONFIG_SND_MPU401 is not set
CONFIG_SND_PCI=y
# CONFIG_SND_AD1889 is not set
# CONFIG_SND_ALS300 is not set
# CONFIG_SND_ALS4000 is not set
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_ATIIXP is not set
# CONFIG_SND_ATIIXP_MODEM is not set
# CONFIG_SND_AU8810 is not set
# CONFIG_SND_AU8820 is not set
# CONFIG_SND_AU8830 is not set
# CONFIG_SND_AW2 is not set
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_BT87X is not set
# CONFIG_SND_CA0106 is not set
# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_OXYGEN is not set
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_CS5530 is not set
# CONFIG_SND_CS5535AUDIO is not set
# CONFIG_SND_DARLA20 is not set
# CONFIG_SND_GINA20 is not set
# CONFIG_SND_LAYLA20 is not set
# CONFIG_SND_DARLA24 is not set
# CONFIG_SND_GINA24 is not set
# CONFIG_SND_LAYLA24 is not set
# CONFIG_SND_MONA is not set
# CONFIG_SND_MIA is not set
# CONFIG_SND_ECHO3G is not set
# CONFIG_SND_INDIGO is not set
# CONFIG_SND_INDIGOIO is not set
# CONFIG_SND_INDIGODJ is not set
# CONFIG_SND_EMU10K1 is not set
# CONFIG_SND_EMU10K1X is not set
# CONFIG_SND_ENS1370 is not set
# CONFIG_SND_ENS1371 is not set
# CONFIG_SND_ES1938 is not set
# CONFIG_SND_ES1968 is not set
# CONFIG_SND_FM801 is not set
CONFIG_SND_HDA_INTEL=y
CONFIG_SND_HDA_HWDEP=y
# CONFIG_SND_HDA_RECONFIG is not set
CONFIG_SND_HDA_INPUT_BEEP=y
CONFIG_SND_HDA_CODEC_REALTEK=y
CONFIG_SND_HDA_CODEC_ANALOG=y
CONFIG_SND_HDA_CODEC_SIGMATEL=y
CONFIG_SND_HDA_CODEC_VIA=y
CONFIG_SND_HDA_CODEC_ATIHDMI=y
CONFIG_SND_HDA_CODEC_NVHDMI=y
CONFIG_SND_HDA_CODEC_INTELHDMI=y
CONFIG_SND_HDA_ELD=y
CONFIG_SND_HDA_CODEC_CONEXANT=y
CONFIG_SND_HDA_CODEC_CMEDIA=y
CONFIG_SND_HDA_CODEC_SI3054=y
CONFIG_SND_HDA_GENERIC=y
CONFIG_SND_HDA_POWER_SAVE=y
CONFIG_SND_HDA_POWER_SAVE_DEFAULT=0
# CONFIG_SND_HDSP is not set
# CONFIG_SND_HDSPM is not set
# CONFIG_SND_HIFIER is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
# CONFIG_SND_INTEL8X0 is not set
# CONFIG_SND_INTEL8X0M is not set
# CONFIG_SND_KORG1212 is not set
# CONFIG_SND_MAESTRO3 is not set
# CONFIG_SND_MIXART is not set
# CONFIG_SND_NM256 is not set
# CONFIG_SND_PCXHR is not set
# CONFIG_SND_RIPTIDE is not set
# CONFIG_SND_RME32 is not set
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
# CONFIG_SND_SIS7019 is not set
# CONFIG_SND_SONICVIBES is not set
# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_VIA82XX is not set
# CONFIG_SND_VIA82XX_MODEM is not set
# CONFIG_SND_VIRTUOSO is not set
# CONFIG_SND_VX222 is not set
# CONFIG_SND_YMFPCI is not set
# CONFIG_SND_USB is not set
# CONFIG_SND_SOC is not set
# CONFIG_SOUND_PRIME is not set
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
# CONFIG_HID_DEBUG is not set
CONFIG_HIDRAW=y

#
# USB Input Devices
#
CONFIG_USB_HID=y
# CONFIG_HID_PID is not set
# CONFIG_USB_HIDDEV is not set

#
# Special HID drivers
#
CONFIG_HID_COMPAT=y
CONFIG_HID_A4TECH=y
CONFIG_HID_APPLE=y
CONFIG_HID_BELKIN=y
CONFIG_HID_CHERRY=y
CONFIG_HID_CHICONY=y
CONFIG_HID_CYPRESS=y
CONFIG_HID_EZKEY=y
CONFIG_HID_GYRATION=y
CONFIG_HID_LOGITECH=y
# CONFIG_LOGITECH_FF is not set
# CONFIG_LOGIRUMBLEPAD2_FF is not set
CONFIG_HID_MICROSOFT=y
CONFIG_HID_MONTEREY=y
CONFIG_HID_NTRIG=y
CONFIG_HID_PANTHERLORD=y
# CONFIG_PANTHERLORD_FF is not set
CONFIG_HID_PETALYNX=y
CONFIG_HID_SAMSUNG=y
CONFIG_HID_SONY=y
CONFIG_HID_SUNPLUS=y
# CONFIG_GREENASIA_FF is not set
CONFIG_HID_TOPSEED=y
# CONFIG_THRUSTMASTER_FF is not set
# CONFIG_ZEROPLUS_FF is not set
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=y
# CONFIG_USB_DEBUG is not set
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y

#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_DEVICE_CLASS is not set
# CONFIG_USB_DYNAMIC_MINORS is not set
CONFIG_USB_SUSPEND=y
# CONFIG_USB_OTG is not set
CONFIG_USB_MON=y
# CONFIG_USB_WUSB is not set
# CONFIG_USB_WUSB_CBAF is not set

#
# USB Host Controller Drivers
#
# CONFIG_USB_C67X00_HCD is not set
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
CONFIG_USB_EHCI_TT_NEWSCHED=y
# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
# CONFIG_USB_OHCI_HCD is not set
CONFIG_USB_UHCI_HCD=y
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set
# CONFIG_USB_HWA_HCD is not set

#
# USB Device Class drivers
#
CONFIG_USB_ACM=y
CONFIG_USB_PRINTER=y
# CONFIG_USB_WDM is not set
# CONFIG_USB_TMC is not set

#
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
#

#
# see USB_STORAGE Help for more information
#
CONFIG_USB_STORAGE=y
# CONFIG_USB_STORAGE_DEBUG is not set
CONFIG_USB_STORAGE_DATAFAB=y
CONFIG_USB_STORAGE_FREECOM=y
CONFIG_USB_STORAGE_ISD200=y
CONFIG_USB_STORAGE_USBAT=y
CONFIG_USB_STORAGE_SDDR09=y
CONFIG_USB_STORAGE_SDDR55=y
CONFIG_USB_STORAGE_JUMPSHOT=y
CONFIG_USB_STORAGE_ALAUDA=y
CONFIG_USB_STORAGE_ONETOUCH=y
CONFIG_USB_STORAGE_KARMA=y
# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
# CONFIG_USB_LIBUSUAL is not set

#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set

#
# USB port drivers
#
# CONFIG_USB_SERIAL is not set

#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_ADUTUX is not set
# CONFIG_USB_SEVSEG is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_BERRY_CHARGE is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_PHIDGET is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
CONFIG_USB_APPLEDISPLAY=y
# CONFIG_USB_SISUSBVGA is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_VST is not set

#
# OTG and related infrastructure
#
# CONFIG_UWB is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y

#
# LED drivers
#
# CONFIG_LEDS_ALIX2 is not set
# CONFIG_LEDS_PCA9532 is not set
# CONFIG_LEDS_CLEVO_MAIL is not set
# CONFIG_LEDS_PCA955X is not set

#
# LED Triggers
#
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
# CONFIG_ACCESSIBILITY is not set
# CONFIG_EDAC is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
# CONFIG_RTC_DEBUG is not set

#
# RTC interfaces
#
CONFIG_RTC_INTF_SYSFS=y
CONFIG_RTC_INTF_PROC=y
CONFIG_RTC_INTF_DEV=y
# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
# CONFIG_RTC_DRV_TEST is not set

#
# I2C RTC drivers
#
# CONFIG_RTC_DRV_DS1307 is not set
# CONFIG_RTC_DRV_DS1374 is not set
# CONFIG_RTC_DRV_DS1672 is not set
# CONFIG_RTC_DRV_MAX6900 is not set
# CONFIG_RTC_DRV_RS5C372 is not set
# CONFIG_RTC_DRV_ISL1208 is not set
# CONFIG_RTC_DRV_X1205 is not set
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8581 is not set

#
# SPI RTC drivers
#

#
# Platform RTC drivers
#
CONFIG_RTC_DRV_CMOS=y
# CONFIG_RTC_DRV_DS1286 is not set
# CONFIG_RTC_DRV_DS1511 is not set
# CONFIG_RTC_DRV_DS1553 is not set
# CONFIG_RTC_DRV_DS1742 is not set
# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
# CONFIG_RTC_DRV_BQ4802 is not set
# CONFIG_RTC_DRV_V3020 is not set

#
# on-CPU RTC drivers
#
# CONFIG_DMADEVICES is not set
# CONFIG_UIO is not set
# CONFIG_STAGING is not set
CONFIG_X86_PLATFORM_DEVICES=y
# CONFIG_ACER_WMI is not set
# CONFIG_ASUS_LAPTOP is not set
# CONFIG_FUJITSU_LAPTOP is not set
# CONFIG_TC1100_WMI is not set
# CONFIG_HP_WMI is not set
# CONFIG_MSI_LAPTOP is not set
# CONFIG_PANASONIC_LAPTOP is not set
# CONFIG_COMPAL_LAPTOP is not set
# CONFIG_SONY_LAPTOP is not set
# CONFIG_THINKPAD_ACPI is not set
# CONFIG_INTEL_MENLOW is not set
CONFIG_ACPI_WMI=y
# CONFIG_ACPI_ASUS is not set
# CONFIG_ACPI_TOSHIBA is not set

#
# Firmware Drivers
#
CONFIG_EDD=y
# CONFIG_EDD_OFF is not set
CONFIG_FIRMWARE_MEMMAP=y
CONFIG_EFI_VARS=y
# CONFIG_DELL_RBU is not set
# CONFIG_DCDBAS is not set
CONFIG_DMIID=y
# CONFIG_ISCSI_IBFT_FIND is not set

#
# File systems
#
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
CONFIG_EXT2_FS_SECURITY=y
CONFIG_EXT2_FS_XIP=y
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
CONFIG_EXT4_FS=y
# CONFIG_EXT4DEV_COMPAT is not set
CONFIG_EXT4_FS_XATTR=y
CONFIG_EXT4_FS_POSIX_ACL=y
CONFIG_EXT4_FS_SECURITY=y
CONFIG_FS_XIP=y
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
CONFIG_JBD2=y
# CONFIG_JBD2_DEBUG is not set
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
CONFIG_JFS_FS=y
CONFIG_JFS_POSIX_ACL=y
CONFIG_JFS_SECURITY=y
# CONFIG_JFS_DEBUG is not set
# CONFIG_JFS_STATISTICS is not set
CONFIG_FS_POSIX_ACL=y
CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_QUOTA=y
CONFIG_QUOTA_NETLINK_INTERFACE=y
# CONFIG_PRINT_QUOTA_WARNING is not set
CONFIG_QUOTA_TREE=y
# CONFIG_QFMT_V1 is not set
CONFIG_QFMT_V2=y
CONFIG_QUOTACTL=y
CONFIG_AUTOFS_FS=m
CONFIG_AUTOFS4_FS=m
CONFIG_FUSE_FS=y
CONFIG_GENERIC_ACL=y

#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_UDF_FS=y
CONFIG_UDF_NLS=y

#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="ascii"
CONFIG_NTFS_FS=y
# CONFIG_NTFS_DEBUG is not set
# CONFIG_NTFS_RW is not set

#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_VMCORE=y
CONFIG_PROC_SYSCTL=y
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
CONFIG_CONFIGFS_FS=y
CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_ECRYPT_FS is not set
# CONFIG_HFS_FS is not set
CONFIG_HFSPLUS_FS=y
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_UBIFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
# CONFIG_NFS_FS is not set
# CONFIG_NFSD is not set
# CONFIG_SMB_FS is not set
CONFIG_CIFS=y
# CONFIG_CIFS_STATS is not set
CONFIG_CIFS_WEAK_PW_HASH=y
CONFIG_CIFS_UPCALL=y
CONFIG_CIFS_XATTR=y
CONFIG_CIFS_POSIX=y
# CONFIG_CIFS_DEBUG2 is not set
CONFIG_CIFS_EXPERIMENTAL=y
CONFIG_CIFS_DFS_UPCALL=y
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set

#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
# CONFIG_OSF_PARTITION is not set
# CONFIG_AMIGA_PARTITION is not set
# CONFIG_ATARI_PARTITION is not set
# CONFIG_MAC_PARTITION is not set
CONFIG_MSDOS_PARTITION=y
# CONFIG_BSD_DISKLABEL is not set
# CONFIG_MINIX_SUBPARTITION is not set
# CONFIG_SOLARIS_X86_PARTITION is not set
# CONFIG_UNIXWARE_DISKLABEL is not set
# CONFIG_LDM_PARTITION is not set
# CONFIG_SGI_PARTITION is not set
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not set
# CONFIG_KARMA_PARTITION is not set
CONFIG_EFI_PARTITION=y
# CONFIG_SYSV68_PARTITION is not set
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="utf8"
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_CODEPAGE_737=y
CONFIG_NLS_CODEPAGE_775=y
CONFIG_NLS_CODEPAGE_850=y
CONFIG_NLS_CODEPAGE_852=y
CONFIG_NLS_CODEPAGE_855=y
CONFIG_NLS_CODEPAGE_857=y
CONFIG_NLS_CODEPAGE_860=y
CONFIG_NLS_CODEPAGE_861=y
CONFIG_NLS_CODEPAGE_862=y
CONFIG_NLS_CODEPAGE_863=y
CONFIG_NLS_CODEPAGE_864=y
CONFIG_NLS_CODEPAGE_865=y
CONFIG_NLS_CODEPAGE_866=y
CONFIG_NLS_CODEPAGE_869=y
CONFIG_NLS_CODEPAGE_936=y
CONFIG_NLS_CODEPAGE_950=y
CONFIG_NLS_CODEPAGE_932=y
CONFIG_NLS_CODEPAGE_949=y
CONFIG_NLS_CODEPAGE_874=y
CONFIG_NLS_ISO8859_8=y
CONFIG_NLS_CODEPAGE_1250=y
CONFIG_NLS_CODEPAGE_1251=y
CONFIG_NLS_ASCII=y
CONFIG_NLS_ISO8859_1=y
CONFIG_NLS_ISO8859_2=y
CONFIG_NLS_ISO8859_3=y
CONFIG_NLS_ISO8859_4=y
CONFIG_NLS_ISO8859_5=y
CONFIG_NLS_ISO8859_6=y
CONFIG_NLS_ISO8859_7=y
CONFIG_NLS_ISO8859_9=y
CONFIG_NLS_ISO8859_13=y
CONFIG_NLS_ISO8859_14=y
CONFIG_NLS_ISO8859_15=y
CONFIG_NLS_KOI8_R=y
CONFIG_NLS_KOI8_U=y
CONFIG_NLS_UTF8=y
# CONFIG_DLM is not set

#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_PRINTK_TIME=y
CONFIG_ALLOW_WARNINGS=y
# CONFIG_ENABLE_WARN_DEPRECATED is not set
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
CONFIG_DEBUG_SHIRQ=y
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
CONFIG_DETECT_HUNG_TASK=y
# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
CONFIG_SCHED_DEBUG=y
CONFIG_SCHEDSTATS=y
CONFIG_TIMER_STATS=y
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_DEBUG_SLAB is not set
CONFIG_DEBUG_PREEMPT=y
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_LOCK_ALLOC is not set
# CONFIG_PROVE_LOCKING is not set
# CONFIG_LOCK_STAT is not set
CONFIG_DEBUG_SPINLOCK_SLEEP=y
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
CONFIG_STACKTRACE=y
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_HIGHMEM=y
CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_VIRTUAL is not set
# CONFIG_DEBUG_WRITECOUNT is not set
CONFIG_DEBUG_MEMORY_INIT=y
CONFIG_DEBUG_LIST=y
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
CONFIG_ARCH_WANT_FRAME_POINTERS=y
CONFIG_FRAME_POINTER=y
CONFIG_BOOT_PRINTK_DELAY=y
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_KPROBES_SANITY_TEST is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_LKDTM is not set
# CONFIG_FAULT_INJECTION is not set
CONFIG_LATENCYTOP=y
CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_USER_STACKTRACE_SUPPORT=y
CONFIG_NOP_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_HW_BRANCH_TRACER=y
CONFIG_RING_BUFFER=y
CONFIG_TRACING=y

#
# Tracers
#
# CONFIG_FUNCTION_TRACER is not set
# CONFIG_IRQSOFF_TRACER is not set
# CONFIG_PREEMPT_TRACER is not set
# CONFIG_SYSPROF_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
# CONFIG_BOOT_TRACER is not set
# CONFIG_TRACE_BRANCH_PROFILING is not set
# CONFIG_POWER_TRACER is not set
# CONFIG_STACK_TRACER is not set
# CONFIG_HW_BRANCH_TRACER is not set
# CONFIG_KMEMTRACE is not set
CONFIG_BLK_DEV_IO_TRACE=y
# CONFIG_FTRACE_STARTUP_TEST is not set
# CONFIG_MMIOTRACE is not set
CONFIG_PROVIDE_OHCI1394_DMA_INIT=y
# CONFIG_FIREWIRE_OHCI_REMOTE_DMA is not set
# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
CONFIG_STRICT_DEVMEM=y
CONFIG_X86_VERBOSE_BOOTUP=y
CONFIG_EARLY_PRINTK=y
# CONFIG_EARLY_PRINTK_DBGP is not set
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_DEBUG_PER_CPU_MAPS is not set
# CONFIG_X86_PTDUMP is not set
CONFIG_DEBUG_RODATA=y
# CONFIG_DEBUG_RODATA_TEST is not set
# CONFIG_DEBUG_NX_TEST is not set
CONFIG_4KSTACKS=y
CONFIG_DOUBLEFAULT=y
CONFIG_HAVE_MMIOTRACE_SUPPORT=y
CONFIG_IO_DELAY_TYPE_0X80=0
CONFIG_IO_DELAY_TYPE_0XED=1
CONFIG_IO_DELAY_TYPE_UDELAY=2
CONFIG_IO_DELAY_TYPE_NONE=3
CONFIG_IO_DELAY_0X80=y
# CONFIG_IO_DELAY_0XED is not set
# CONFIG_IO_DELAY_UDELAY is not set
# CONFIG_IO_DELAY_NONE is not set
CONFIG_DEFAULT_IO_DELAY_TYPE=0
CONFIG_DEBUG_BOOT_PARAMS=y
# CONFIG_CPA_DEBUG is not set
# CONFIG_OPTIMIZE_INLINING is not set

#
# Security options
#
CONFIG_KEYS=y
CONFIG_KEYS_DEBUG_PROC_KEYS=y
CONFIG_SECURITY=y
CONFIG_SECURITYFS=y
CONFIG_SECURITY_NETWORK=y
CONFIG_SECURITY_NETWORK_XFRM=y
# CONFIG_SECURITY_PATH is not set
CONFIG_SECURITY_FILE_CAPABILITIES=y
# CONFIG_SECURITY_ROOTPLUG is not set
CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=65536
CONFIG_SECURITY_SELINUX=y
CONFIG_SECURITY_SELINUX_BOOTPARAM=y
CONFIG_SECURITY_SELINUX_BOOTPARAM_VALUE=1
CONFIG_SECURITY_SELINUX_DISABLE=y
CONFIG_SECURITY_SELINUX_DEVELOP=y
CONFIG_SECURITY_SELINUX_AVC_STATS=y
CONFIG_SECURITY_SELINUX_CHECKREQPROT_VALUE=1
# CONFIG_SECURITY_SELINUX_POLICYDB_VERSION_MAX is not set
# CONFIG_SECURITY_SMACK is not set
CONFIG_XOR_BLOCKS=m
CONFIG_ASYNC_CORE=m
CONFIG_ASYNC_MEMCPY=m
CONFIG_ASYNC_XOR=m
CONFIG_CRYPTO=y

#
# Crypto core or helper
#
# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG=y
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
CONFIG_CRYPTO_GF128MUL=y
CONFIG_CRYPTO_NULL=y
# CONFIG_CRYPTO_CRYPTD is not set
CONFIG_CRYPTO_AUTHENC=y
# CONFIG_CRYPTO_TEST is not set

#
# Authenticated Encryption with Associated Data
#
CONFIG_CRYPTO_CCM=y
CONFIG_CRYPTO_GCM=y
CONFIG_CRYPTO_SEQIV=y

#
# Block modes
#
CONFIG_CRYPTO_CBC=y
CONFIG_CRYPTO_CTR=y
CONFIG_CRYPTO_CTS=y
CONFIG_CRYPTO_ECB=y
CONFIG_CRYPTO_LRW=y
CONFIG_CRYPTO_PCBC=y
CONFIG_CRYPTO_XTS=y

#
# Hash modes
#
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_XCBC=y

#
# Digest
#
CONFIG_CRYPTO_CRC32C=y
# CONFIG_CRYPTO_CRC32C_INTEL is not set
CONFIG_CRYPTO_MD4=y
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_MICHAEL_MIC=y
CONFIG_CRYPTO_RMD128=y
CONFIG_CRYPTO_RMD160=y
CONFIG_CRYPTO_RMD256=y
CONFIG_CRYPTO_RMD320=y
CONFIG_CRYPTO_SHA1=y
CONFIG_CRYPTO_SHA256=y
CONFIG_CRYPTO_SHA512=y
CONFIG_CRYPTO_TGR192=y
CONFIG_CRYPTO_WP512=y

#
# Ciphers
#
CONFIG_CRYPTO_AES=y
CONFIG_CRYPTO_AES_586=y
CONFIG_CRYPTO_ANUBIS=y
CONFIG_CRYPTO_ARC4=y
CONFIG_CRYPTO_BLOWFISH=y
CONFIG_CRYPTO_CAMELLIA=y
CONFIG_CRYPTO_CAST5=y
CONFIG_CRYPTO_CAST6=y
CONFIG_CRYPTO_DES=y
CONFIG_CRYPTO_FCRYPT=y
CONFIG_CRYPTO_KHAZAD=y
CONFIG_CRYPTO_SALSA20=y
CONFIG_CRYPTO_SALSA20_586=y
CONFIG_CRYPTO_SEED=y
CONFIG_CRYPTO_SERPENT=y
CONFIG_CRYPTO_TEA=y
CONFIG_CRYPTO_TWOFISH=y
CONFIG_CRYPTO_TWOFISH_COMMON=y
CONFIG_CRYPTO_TWOFISH_586=y

#
# Compression
#
CONFIG_CRYPTO_DEFLATE=y
CONFIG_CRYPTO_LZO=y

#
# Random Number Generation
#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
# CONFIG_CRYPTO_HW is not set
CONFIG_HAVE_KVM=y
CONFIG_VIRTUALIZATION=y
CONFIG_KVM=y
CONFIG_KVM_INTEL=y
# CONFIG_KVM_AMD is not set
# CONFIG_KVM_TRACE is not set
# CONFIG_LGUEST is not set
CONFIG_VIRTIO=y
CONFIG_VIRTIO_RING=y
CONFIG_VIRTIO_PCI=y
CONFIG_VIRTIO_BALLOON=y

#
# Library routines
#
CONFIG_BITREVERSE=y
CONFIG_GENERIC_FIND_FIRST_BIT=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_FIND_LAST_BIT=y
CONFIG_CRC_CCITT=y
CONFIG_CRC16=y
CONFIG_CRC_T10DIF=y
CONFIG_CRC_ITU_T=y
CONFIG_CRC32=y
CONFIG_CRC7=y
CONFIG_LIBCRC32C=y
CONFIG_AUDIT_GENERIC=y
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_LZO_COMPRESS=y
CONFIG_LZO_DECOMPRESS=y
CONFIG_REED_SOLOMON=m
CONFIG_REED_SOLOMON_DEC16=y
CONFIG_TEXTSEARCH=y
CONFIG_TEXTSEARCH_KMP=y
CONFIG_TEXTSEARCH_BM=y
CONFIG_TEXTSEARCH_FSM=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y



^ permalink raw reply	[flat|nested] 359+ messages in thread

* Re: [Announce] 2.6.29-rc4-rt2
  2009-02-19 18:44   ` [Announce] 2.6.29-rc4-rt2 Thomas Meyer
@ 2009-02-19 20:50     ` Peter Zijlstra
  0 siblings, 0 replies; 359+ messages in thread
From: Peter Zijlstra @ 2009-02-19 20:50 UTC (permalink / raw)
  To: Thomas Meyer
  Cc: Thomas Gleixner, Thomas Gleixner, LKML, rt-users, Ingo Molnar,
	Steven Rostedt, Carsten Emde, Clark Williams

On Thu, 2009-02-19 at 19:44 +0100, Thomas Meyer wrote:

> [    0.003333] ------------[ cut here ]------------
> [    0.003333] WARNING: at mm/highmem.c:225 kmap_flush_unused+0x2b/0x4b()
> [    0.003333] Hardware name: MacBookPro1,1
> [    0.003333] Modules linked in:
> [    0.003333] Pid: 0, comm: swapper Not tainted 2.6.29-rc4-rt2-tip #54
> [    0.003333] Call Trace:
> [    0.003333]  [<c0451e70>] warn_slowpath+0x8a/0xd3
> [    0.003333]  [<c043ee71>] ? kmap+0x6c/0x77
> [    0.003333]  [<c04ad7f5>] ? get_page_from_freelist+0x389/0x42b
> [    0.003333]  [<c04adb8f>] ? __alloc_pages_internal+0xbf/0x3a6
> [    0.003333]  [<c04b9b92>] kmap_flush_unused+0x2b/0x4b
> [    0.003333]  [<c043b877>] change_page_attr_set_clr+0xe8/0x2ca
> [    0.003333]  [<c09aabd9>] ? rt_spin_lock+0x32/0x79
> [    0.003333]  [<c04bbeb3>] ? __pte_alloc_kernel+0x50/0x83
> [    0.003333]  [<c043bd16>] _set_memory_uc+0x27/0x3a
> [    0.003333]  [<c043ac3d>] ioremap_change_attr+0x24/0x47
> [    0.003333]  [<c043ae62>] __ioremap_caller+0x202/0x256
> [    0.003333]  [<c0cd0b79>] ? hpet_enable+0x2d/0x26c
> [    0.003333]  [<c043afe0>] ioremap_nocache+0x1c/0x2f
> [    0.003333]  [<c0cd0b79>] ? hpet_enable+0x2d/0x26c
> [    0.003333]  [<c0cd0b79>] hpet_enable+0x2d/0x26c
> [    0.003333]  [<c0cc34fb>] hpet_time_init+0x16/0x37
> [    0.003333]  [<c0cbd997>] start_kernel+0x289/0x345
> [    0.003333]  [<c0cbd093>] __init_begin+0x93/0xac
> [    0.003333] ---[ end trace a7919e7f17c0a725 ]---

Hmm, this appears unimplemented on -rt, shouldn't hurt much, but could
be fixed.

> [   13.169831] BUG: sleeping function called from invalid context at arch/x86/mm/highmem_32.c:8
> [   13.169957] in_atomic(): 0, irqs_disabled(): 1, pid: 1030, name: cryptsetup
> [   13.170075] Pid: 1030, comm: cryptsetup Tainted: G        W  2.6.29-rc4-rt2-tip #54
> [   13.170196] Call Trace:
> [   13.170284]  [<c0444cdd>] __might_sleep+0xda/0xf0
> [   13.170374]  [<c043ee55>] kmap+0x50/0x77
> [   13.170460]  [<c043db3b>] gup_pte_range+0x4b/0xe9
> [   13.170548]  [<c043dcb7>] get_user_pages_fast+0xde/0x17f
> [   13.170639]  [<c04f75f1>] dio_get_page+0x59/0x124
> [   13.170729]  [<c04f8258>] __blockdev_direct_IO+0x4ad/0xabe
> [   13.170819]  [<c04f5cdb>] ? blkdev_get_blocks+0x0/0x11c
> [   13.170837]  [<c04f730a>] blkdev_direct_IO+0x3f/0x55
> [   13.170837]  [<c04f5cdb>] ? blkdev_get_blocks+0x0/0x11c
> [   13.170837]  [<c04a977a>] generic_file_aio_read+0xfd/0x587
> [   13.170837]  [<c05ff445>] ? avc_has_perm+0x56/0x71
> [   13.170837]  [<c04d0fcf>] do_sync_read+0xc6/0x118
> [   13.170837]  [<c0467414>] ? autoremove_wake_function+0x0/0x54
> [   13.170837]  [<c06046d6>] ? selinux_file_permission+0x119/0x132
> [   13.170837]  [<c05fa4dc>] ? security_file_permission+0x1e/0x31
> [   13.170837]  [<c04d0f09>] ? do_sync_read+0x0/0x118
> [   13.170837]  [<c04d1b61>] vfs_read+0x99/0x14e
> [   13.170837]  [<c04d1cf7>] sys_read+0x50/0x87
> [   13.170837]  [<c0420086>] sysenter_do_call+0x12/0x21

Caused by CONFIG_HIGHPTE=y,

as long as TLB flushes are IPIs we really need to disable IRQs for
gup_fast() and thus will either need non-preemptible kmap or disabled
high-pte or disable the gup_fast() fast-path, which would be a shame.



^ permalink raw reply	[flat|nested] 359+ messages in thread

* Re: [Announce] 2.6.29-rc4-rt2
  2009-02-12 22:56 ` [Announce] 2.6.29-rc4-rt2 Thomas Gleixner
  2009-02-13  0:48   ` Frederic Weisbecker
  2009-02-19 18:44   ` [Announce] 2.6.29-rc4-rt2 Thomas Meyer
@ 2009-02-20  6:32   ` Thomas Meyer
  2009-02-20  7:49     ` Peter Zijlstra
  2009-02-20 22:25   ` Sven-Thorsten Dietrich
                     ` (3 subsequent siblings)
  6 siblings, 1 reply; 359+ messages in thread
From: Thomas Meyer @ 2009-02-20  6:32 UTC (permalink / raw)
  To: Thomas Gleixner
  Cc: Thomas Gleixner, LKML, rt-users, Ingo Molnar, Steven Rostedt,
	Peter Zijlstra, Carsten Emde, Clark Williams

Am Donnerstag, den 12.02.2009, 23:56 +0100 schrieb Thomas Gleixner: 
> We are pleased to announce the first update to our new preempt-rt
> series. It fixes the reported bugs and some more.
> 
> Download locations:
> 
>    http://rt.et.redhat.com/download/
>    http://www.kernel.org/pub/linux/kernel/projects/rt/
>  
> Information on the RT patch can be found at:
> 
>   http://rt.wiki.kernel.org/index.php/Main_Page
> 
> to build the 2.6.29-rc4-rt2 tree, the following patches should be
> applied:
> 
>   http://www.kernel.org/pub/linux/kernel/v2.6/testing/linux-2.6.29-rc4.tar.bz2
>   http://www.kernel.org/pub/linux/kernel/projects/rt/patch-2.6.29-rc4-rt2.bz2
> 
> The broken out patches are also available at the same download
> locations.
> 
> Enjoy !
> 
>       Thomas, Ingo

Hi,

Are you interested in these BUG reports?

Without CONFIG_HIGHPTE kernel boots and seems to work correct, but I'm
hitting these two BUGs:

[   19.840100] BUG: sleeping function called from invalid context at arch/x86/mm/highmem_32.c:8
[   19.840105] in_atomic(): 0, irqs_disabled(): 1, pid: 718, name: IRQ-14
[   19.840110] Pid: 718, comm: IRQ-14 Tainted: G        W  2.6.29-rc4-rt2-tip #55
[   19.840113] Call Trace:
[   19.840123]  [<c0444cbd>] __might_sleep+0xda/0xf0
[   19.840128]  [<c043ee31>] kmap+0x50/0x77
[   19.840133]  [<c0663e35>] sg_miter_next+0xc1/0xdf
[   19.840137]  [<c0663ee8>] sg_copy_buffer+0x95/0xc5
[   19.840141]  [<c0663f35>] sg_copy_to_buffer+0x1d/0x33
[   19.840149]  [<c0774ab1>] atapi_qc_complete+0x25a/0x2c5
[   19.840153]  [<c076dece>] __ata_qc_complete+0xb4/0xcd
[   19.840157]  [<c076f844>] ata_qc_complete+0x1be/0x1d7
[   19.840162]  [<c077c812>] ata_hsm_qc_complete+0xa9/0xd3
[   19.840166]  [<c077ceb7>] ata_sff_hsm_move+0x67b/0x6da
[   19.840171]  [<c077d19b>] ata_sff_interrupt+0x15d/0x205
[   19.840176]  [<c049440a>] handle_IRQ_event+0x4b/0xce
[   19.840180]  [<c0494ac7>] do_irqd+0x141/0x271
[   19.840184]  [<c0494986>] ? do_irqd+0x0/0x271
[   19.840189]  [<c0467022>] kthread+0x4a/0x82
[   19.840192]  [<c0466fd8>] ? kthread+0x0/0x82
[   19.840197]  [<c0420b67>] kernel_thread_helper+0x7/0x10

and:
[  357.286589] BUG: sleeping function called from invalid context at arch/x86/mm/highmem_32.c:8
[  357.286597] in_atomic(): 0, irqs_disabled(): 1, pid: 718, name: IRQ-14
[  357.286605] Pid: 718, comm: IRQ-14 Tainted: G        W  2.6.29-rc4-rt2-tip #55
[  357.286611] Call Trace:
[  357.286624]  [<c0444cbd>] __might_sleep+0xda/0xf0
[  357.286631]  [<c043ee31>] kmap+0x50/0x77
[  357.286640]  [<c0663e35>] sg_miter_next+0xc1/0xdf
[  357.286647]  [<c0663ee8>] sg_copy_buffer+0x95/0xc5
[  357.286654]  [<c0663f35>] sg_copy_to_buffer+0x1d/0x33
[  357.286664]  [<c0774ab1>] atapi_qc_complete+0x25a/0x2c5
[  357.286672]  [<c076dece>] __ata_qc_complete+0xb4/0xcd
[  357.286680]  [<c076f844>] ata_qc_complete+0x1be/0x1d7
[  357.286688]  [<c09ab024>] ? __spin_unlock+0x1e/0x43
[  357.286696]  [<c077c812>] ata_hsm_qc_complete+0xa9/0xd3
[  357.286703]  [<c077ceb7>] ata_sff_hsm_move+0x67b/0x6da
[  357.286711]  [<c077d19b>] ata_sff_interrupt+0x15d/0x205
[  357.286720]  [<c049440a>] handle_IRQ_event+0x4b/0xce
[  357.286727]  [<c0494ac7>] do_irqd+0x141/0x271
[  357.286734]  [<c0494986>] ? do_irqd+0x0/0x271
[  357.286742]  [<c0467022>] kthread+0x4a/0x82
[  357.286757]  [<c0466fd8>] ? kthread+0x0/0x82
[  357.286762]  [<c0420b67>] kernel_thread_helper+0x7/0x10

greets
thomas



^ permalink raw reply	[flat|nested] 359+ messages in thread

* Re: [Announce] 2.6.29-rc4-rt2
  2009-02-20  6:32   ` Thomas Meyer
@ 2009-02-20  7:49     ` Peter Zijlstra
  2009-02-20 15:09       ` Thomas Meyer
  0 siblings, 1 reply; 359+ messages in thread
From: Peter Zijlstra @ 2009-02-20  7:49 UTC (permalink / raw)
  To: Thomas Meyer
  Cc: Thomas Gleixner, Thomas Gleixner, LKML, rt-users, Ingo Molnar,
	Steven Rostedt, Carsten Emde, Clark Williams, jens.axboe,
	Tejun Heo, FUJITA Tomonori, James Bottomley

On Fri, 2009-02-20 at 07:32 +0100, Thomas Meyer wrote:
> Are you interested in these BUG reports?

Yes we are, thanks!

> Without CONFIG_HIGHPTE kernel boots and seems to work correct, but I'm
> hitting these two BUGs:

They appear to be identical, so I'll consider them two instances of one
bug :-)

> [   19.840100] BUG: sleeping function called from invalid context at arch/x86/mm/highmem_32.c:8
> [   19.840105] in_atomic(): 0, irqs_disabled(): 1, pid: 718, name: IRQ-14
> [   19.840110] Pid: 718, comm: IRQ-14 Tainted: G        W  2.6.29-rc4-rt2-tip #55
> [   19.840113] Call Trace:
> [   19.840123]  [<c0444cbd>] __might_sleep+0xda/0xf0
> [   19.840128]  [<c043ee31>] kmap+0x50/0x77
> [   19.840133]  [<c0663e35>] sg_miter_next+0xc1/0xdf
> [   19.840137]  [<c0663ee8>] sg_copy_buffer+0x95/0xc5
> [   19.840141]  [<c0663f35>] sg_copy_to_buffer+0x1d/0x33
> [   19.840149]  [<c0774ab1>] atapi_qc_complete+0x25a/0x2c5
> [   19.840153]  [<c076dece>] __ata_qc_complete+0xb4/0xcd
> [   19.840157]  [<c076f844>] ata_qc_complete+0x1be/0x1d7
> [   19.840162]  [<c077c812>] ata_hsm_qc_complete+0xa9/0xd3
> [   19.840166]  [<c077ceb7>] ata_sff_hsm_move+0x67b/0x6da
> [   19.840171]  [<c077d19b>] ata_sff_interrupt+0x15d/0x205
> [   19.840176]  [<c049440a>] handle_IRQ_event+0x4b/0xce
> [   19.840180]  [<c0494ac7>] do_irqd+0x141/0x271
> [   19.840184]  [<c0494986>] ? do_irqd+0x0/0x271
> [   19.840189]  [<c0467022>] kthread+0x4a/0x82
> [   19.840192]  [<c0466fd8>] ? kthread+0x0/0x82
> [   19.840197]  [<c0420b67>] kernel_thread_helper+0x7/0x10

sg_copy_buffer() seems to disable IRQs, however since on -rt everything
is a irq-thread and kmap is preemptible, we don't appear to have that
need.

CC'd everybody who ever touched the file.

---
 lib/scatterlist.c |    4 ++--
 1 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/lib/scatterlist.c b/lib/scatterlist.c
index b7b449d..4c6510d 100644
--- a/lib/scatterlist.c
+++ b/lib/scatterlist.c
@@ -426,7 +426,7 @@ static size_t sg_copy_buffer(struct scatterlist *sgl, unsigned int nents,
 
 	sg_miter_start(&miter, sgl, nents, SG_MITER_ATOMIC);
 
-	local_irq_save(flags);
+	local_irq_save_nort(flags);
 
 	while (sg_miter_next(&miter) && offset < buflen) {
 		unsigned int len;
@@ -445,7 +445,7 @@ static size_t sg_copy_buffer(struct scatterlist *sgl, unsigned int nents,
 
 	sg_miter_stop(&miter);
 
-	local_irq_restore(flags);
+	local_irq_restore_nort(flags);
 	return offset;
 }
 



^ permalink raw reply related	[flat|nested] 359+ messages in thread

* Re: [Announce] 2.6.29-rc4-rt2
  2009-02-20  7:49     ` Peter Zijlstra
@ 2009-02-20 15:09       ` Thomas Meyer
  2009-02-20 16:17         ` Ingo Molnar
  0 siblings, 1 reply; 359+ messages in thread
From: Thomas Meyer @ 2009-02-20 15:09 UTC (permalink / raw)
  To: Peter Zijlstra
  Cc: Thomas Gleixner, Thomas Gleixner, LKML, rt-users, Ingo Molnar,
	Steven Rostedt, Carsten Emde, Clark Williams, jens.axboe,
	Tejun Heo, FUJITA Tomonori, James Bottomley

Am Freitag, den 20.02.2009, 08:49 +0100 schrieb Peter Zijlstra:
> On Fri, 2009-02-20 at 07:32 +0100, Thomas Meyer wrote:
> > Are you interested in these BUG reports?
> 
> Yes we are, thanks!
> 
> > Without CONFIG_HIGHPTE kernel boots and seems to work correct, but I'm
> > hitting these two BUGs:
> 
> They appear to be identical, so I'll consider them two instances of one
> bug :-)
> 
> > [   19.840100] BUG: sleeping function called from invalid context at arch/x86/mm/highmem_32.c:8
> > [   19.840105] in_atomic(): 0, irqs_disabled(): 1, pid: 718, name: IRQ-14
> > [   19.840110] Pid: 718, comm: IRQ-14 Tainted: G        W  2.6.29-rc4-rt2-tip #55
> > [   19.840113] Call Trace:
> > [   19.840123]  [<c0444cbd>] __might_sleep+0xda/0xf0
> > [   19.840128]  [<c043ee31>] kmap+0x50/0x77
> > [   19.840133]  [<c0663e35>] sg_miter_next+0xc1/0xdf
> > [   19.840137]  [<c0663ee8>] sg_copy_buffer+0x95/0xc5
> > [   19.840141]  [<c0663f35>] sg_copy_to_buffer+0x1d/0x33
> > [   19.840149]  [<c0774ab1>] atapi_qc_complete+0x25a/0x2c5
> > [   19.840153]  [<c076dece>] __ata_qc_complete+0xb4/0xcd
> > [   19.840157]  [<c076f844>] ata_qc_complete+0x1be/0x1d7
> > [   19.840162]  [<c077c812>] ata_hsm_qc_complete+0xa9/0xd3
> > [   19.840166]  [<c077ceb7>] ata_sff_hsm_move+0x67b/0x6da
> > [   19.840171]  [<c077d19b>] ata_sff_interrupt+0x15d/0x205
> > [   19.840176]  [<c049440a>] handle_IRQ_event+0x4b/0xce
> > [   19.840180]  [<c0494ac7>] do_irqd+0x141/0x271
> > [   19.840184]  [<c0494986>] ? do_irqd+0x0/0x271
> > [   19.840189]  [<c0467022>] kthread+0x4a/0x82
> > [   19.840192]  [<c0466fd8>] ? kthread+0x0/0x82
> > [   19.840197]  [<c0420b67>] kernel_thread_helper+0x7/0x10
> 
> sg_copy_buffer() seems to disable IRQs, however since on -rt everything
> is a irq-thread and kmap is preemptible, we don't appear to have that
> need.
> 
> CC'd everybody who ever touched the file.
> 
> ---
>  lib/scatterlist.c |    4 ++--
>  1 files changed, 2 insertions(+), 2 deletions(-)
> 
> diff --git a/lib/scatterlist.c b/lib/scatterlist.c
> index b7b449d..4c6510d 100644
> --- a/lib/scatterlist.c
> +++ b/lib/scatterlist.c
> @@ -426,7 +426,7 @@ static size_t sg_copy_buffer(struct scatterlist *sgl, unsigned int nents,
>  
>  	sg_miter_start(&miter, sgl, nents, SG_MITER_ATOMIC);
>  
> -	local_irq_save(flags);
> +	local_irq_save_nort(flags);
>  
>  	while (sg_miter_next(&miter) && offset < buflen) {
>  		unsigned int len;
> @@ -445,7 +445,7 @@ static size_t sg_copy_buffer(struct scatterlist *sgl, unsigned int nents,
>  
>  	sg_miter_stop(&miter);
>  
> -	local_irq_restore(flags);
> +	local_irq_restore_nort(flags);
>  	return offset;
>  }
>  

With above patch I get a lot of warnings in 

lib/scatterlist.c:395 sg_miter_stop+0x5a/0xa4().

Like:
[   34.946650] ------------[ cut here ]------------
[   34.946653] WARNING: at lib/scatterlist.c:395 sg_miter_stop+0x5a/0xa4()
[   34.946655] Hardware name: MacBookPro1,1
[   34.946657] Modules linked in: ath5k mac80211 cfg80211 video [last unloaded: scsi_wait_scan]
[   34.946665] Pid: 8, comm: sirq-block/0 Tainted: G        W  2.6.29-rc4-rt2-tip #56
[   34.946690] Call Trace:
[   34.946694]  [<c0451e50>] warn_slowpath+0x8a/0xd3
[   34.946698]  [<c09ab0e4>] ? __spin_unlock+0x1e/0x43
[   34.946703]  [<c04476d6>] ? enqueue_task_fair+0x2df/0x331
[   34.946707]  [<c0442c7c>] ? enqueue_task+0x70/0x8e
[   34.946711]  [<c044cf91>] ? try_to_wake_up+0x2eb/0x306
[   34.946715]  [<c0663e0a>] sg_miter_stop+0x5a/0xa4
[   34.946719]  [<c0663fd6>] sg_copy_buffer+0xa3/0xbe
[   34.946723]  [<c0664041>] sg_copy_from_buffer+0x1d/0x33
[   34.946728]  [<c0774c3d>] ata_scsi_rbuf_fill+0x59/0x90
[   34.946731]  [<c07760ed>] ? ata_scsiop_inq_80+0x0/0x41
[   34.946735]  [<c0755b3e>] ? scsi_done+0x0/0x2d
[   34.946739]  [<c0755b3e>] ? scsi_done+0x0/0x2d
[   34.946743]  [<c0774e24>] ata_scsi_simulate+0x1b0/0x1f8
[   34.946747]  [<c0755b3e>] ? scsi_done+0x0/0x2d
[   34.946752]  [<c0775178>] ata_scsi_queuecmd+0x16d/0x1bc
[   34.946756]  [<c0755de0>] scsi_dispatch_cmd+0x18a/0x208
[   34.946760]  [<c075b378>] scsi_request_fn+0x349/0x487
[   34.946764]  [<c064bcb6>] blk_invoke_request_fn+0x75/0x146
[   34.946768]  [<c064c671>] __blk_run_queue+0x2d/0x42
[   34.946772]  [<c064c6ac>] blk_run_queue+0x26/0x46
[   34.946775]  [<c075a836>] scsi_run_queue+0x283/0x321
[   34.946780]  [<c075b6c9>] scsi_next_command+0x36/0x54
[   34.946783]  [<c075b8e2>] scsi_end_request+0x84/0xa1
[   34.946787]  [<c075beb9>] scsi_io_completion+0x1a4/0x3a6
[   34.946792]  [<c075c1be>] ? scsi_device_unbusy+0x8c/0xa3
[   34.946796]  [<c0755b25>] scsi_finish_command+0xd3/0xec
[   34.946800]  [<c075c3bc>] scsi_softirq_done+0x104/0x11d
[   34.946804]  [<c06505df>] blk_done_softirq+0x5f/0x7e
[   34.946808]  [<c04575e3>] ksoftirqd+0x12d/0x223
[   34.946813]  [<c04574b6>] ? ksoftirqd+0x0/0x223
[   34.946816]  [<c0467022>] kthread+0x4a/0x82
[   34.946820]  [<c0466fd8>] ? kthread+0x0/0x82
[   34.946824]  [<c0420b67>] kernel_thread_helper+0x7/0x10
[   34.946827] ---[ end trace a7919e7f17c0a754 ]---



^ permalink raw reply	[flat|nested] 359+ messages in thread

* Re: [Announce] 2.6.29-rc4-rt2
  2009-02-20 15:09       ` Thomas Meyer
@ 2009-02-20 16:17         ` Ingo Molnar
  0 siblings, 0 replies; 359+ messages in thread
From: Ingo Molnar @ 2009-02-20 16:17 UTC (permalink / raw)
  To: Thomas Meyer
  Cc: Peter Zijlstra, Thomas Gleixner, Thomas Gleixner, LKML, rt-users,
	Steven Rostedt, Carsten Emde, Clark Williams, jens.axboe,
	Tejun Heo, FUJITA Tomonori, James Bottomley


* Thomas Meyer <thomas@m3y3r.de> wrote:

> With above patch I get a lot of warnings in 
> 
> lib/scatterlist.c:395 sg_miter_stop+0x5a/0xa4().
> 
> Like:
> [   34.946650] ------------[ cut here ]------------
> [   34.946653] WARNING: at lib/scatterlist.c:395 sg_miter_stop+0x5a/0xa4()

could you edit lib/scatterlist.c line 395 and remove this line:

                        WARN_ON(!irqs_disabled());

?

	Ingo

^ permalink raw reply	[flat|nested] 359+ messages in thread

* Re: [Announce] 2.6.29-rc4-rt2
  2009-02-12 22:56 ` [Announce] 2.6.29-rc4-rt2 Thomas Gleixner
                     ` (2 preceding siblings ...)
  2009-02-20  6:32   ` Thomas Meyer
@ 2009-02-20 22:25   ` Sven-Thorsten Dietrich
  2009-02-20 22:54     ` Peter Zijlstra
  2009-02-21 17:04   ` Thomas Meyer
                     ` (2 subsequent siblings)
  6 siblings, 1 reply; 359+ messages in thread
From: Sven-Thorsten Dietrich @ 2009-02-20 22:25 UTC (permalink / raw)
  To: Thomas Gleixner, peterz
  Cc: Thomas Gleixner, LKML, rt-users, Ingo Molnar, Steven Rostedt,
	Peter Zijlstra, Carsten Emde, Clark Williams

On Thu, 2009-02-12 at 23:56 +0100, Thomas Gleixner wrote:
> We are pleased to announce the first update to our new preempt-rt
> series. It fixes the reported bugs and some more.
> 
FYI:

These patches in RT2:

rt-fix-ipi-kfree-introduce-ipi_softirq.patch
rt-fix-ipi-kfree-introduce-ipi_softirq-cleanup.patch

Cause a hard-lock when running dhcp on my 8-way AMD box.

Reverting them eliminates the issue.

Sven




^ permalink raw reply	[flat|nested] 359+ messages in thread

* Re: [Announce] 2.6.29-rc4-rt2
  2009-02-20 22:25   ` Sven-Thorsten Dietrich
@ 2009-02-20 22:54     ` Peter Zijlstra
  2009-02-21  0:57       ` Sven-Thorsten Dietrich
  0 siblings, 1 reply; 359+ messages in thread
From: Peter Zijlstra @ 2009-02-20 22:54 UTC (permalink / raw)
  To: Sven-Thorsten Dietrich
  Cc: Thomas Gleixner, Thomas Gleixner, LKML, rt-users, Ingo Molnar,
	Steven Rostedt, Carsten Emde, Clark Williams

On Fri, 2009-02-20 at 14:25 -0800, Sven-Thorsten Dietrich wrote:
> On Thu, 2009-02-12 at 23:56 +0100, Thomas Gleixner wrote:
> > We are pleased to announce the first update to our new preempt-rt
> > series. It fixes the reported bugs and some more.
> > 
> FYI:
> 
> These patches in RT2:
> 
> rt-fix-ipi-kfree-introduce-ipi_softirq.patch
> rt-fix-ipi-kfree-introduce-ipi_softirq-cleanup.patch
> 
> Cause a hard-lock when running dhcp on my 8-way AMD box.
> 
> Reverting them eliminates the issue.

can you try the patches in:

http://lkml.org/lkml/2009/2/17/385
http://lkml.org/lkml/2009/2/17/384
http://lkml.org/lkml/2009/2/17/387




^ permalink raw reply	[flat|nested] 359+ messages in thread

* Re: [Announce] 2.6.29-rc4-rt2
  2009-02-20 22:54     ` Peter Zijlstra
@ 2009-02-21  0:57       ` Sven-Thorsten Dietrich
  0 siblings, 0 replies; 359+ messages in thread
From: Sven-Thorsten Dietrich @ 2009-02-21  0:57 UTC (permalink / raw)
  To: Peter Zijlstra
  Cc: Thomas Gleixner, Thomas Gleixner, LKML, rt-users, Ingo Molnar,
	Steven Rostedt, Carsten Emde, Clark Williams

On Fri, 2009-02-20 at 23:54 +0100, Peter Zijlstra wrote:
> On Fri, 2009-02-20 at 14:25 -0800, Sven-Thorsten Dietrich wrote:
> > On Thu, 2009-02-12 at 23:56 +0100, Thomas Gleixner wrote:
> > > We are pleased to announce the first update to our new preempt-rt
> > > series. It fixes the reported bugs and some more.
> > > 
> > FYI:
> > 
> > These patches in RT2:
> > 
> > rt-fix-ipi-kfree-introduce-ipi_softirq.patch
> > rt-fix-ipi-kfree-introduce-ipi_softirq-cleanup.patch
> > 
> > Cause a hard-lock when running dhcp on my 8-way AMD box.
> > 
> > Reverting them eliminates the issue.
> 
> can you try the patches in:
> 
> http://lkml.org/lkml/2009/2/17/385
> http://lkml.org/lkml/2009/2/17/384
> http://lkml.org/lkml/2009/2/17/387
> 
> 
> 

These work with 2.6.29-rc4-rt2.

Also fixes serial console stall.

I applied them before RT and had to tweak these patches:

preempt-realtime-ipi-call-lock-raw.patch
preempt-realtime-x86_64.patch

Thanks!

Sven




^ permalink raw reply	[flat|nested] 359+ messages in thread

* Re: [Announce] 2.6.29-rc4-rt2
  2009-02-12 22:56 ` [Announce] 2.6.29-rc4-rt2 Thomas Gleixner
                     ` (3 preceding siblings ...)
  2009-02-20 22:25   ` Sven-Thorsten Dietrich
@ 2009-02-21 17:04   ` Thomas Meyer
  2009-02-21 17:19       ` Frederic Weisbecker
  2009-02-22 13:20   ` Thomas Meyer
  2009-02-23 19:44   ` [Announce] 2.6.29-rc6-rt2 Thomas Gleixner
  6 siblings, 1 reply; 359+ messages in thread
From: Thomas Meyer @ 2009-02-21 17:04 UTC (permalink / raw)
  To: Thomas Gleixner
  Cc: Thomas Gleixner, LKML, rt-users, Ingo Molnar, Steven Rostedt,
	Peter Zijlstra, Carsten Emde, Clark Williams

Am Donnerstag, den 12.02.2009, 23:56 +0100 schrieb Thomas Gleixner:
> We are pleased to announce the first update to our new preempt-rt
> series. It fixes the reported bugs and some more.
> 
> Download locations:
> 
>    http://rt.et.redhat.com/download/
>    http://www.kernel.org/pub/linux/kernel/projects/rt/
>  
> Information on the RT patch can be found at:
> 
>   http://rt.wiki.kernel.org/index.php/Main_Page
> 
> to build the 2.6.29-rc4-rt2 tree, the following patches should be
> applied:
> 
>   http://www.kernel.org/pub/linux/kernel/v2.6/testing/linux-2.6.29-rc4.tar.bz2
>   http://www.kernel.org/pub/linux/kernel/projects/rt/patch-2.6.29-rc4-rt2.bz2
> 
> The broken out patches are also available at the same download
> locations.
> 
> Enjoy !
> 
>       Thomas, Ingo
> --

Hi,

I got this warning, that i never saw before with a non rt-preempt
kernel. But maybe it's just coincidence...

[22652.437889] ------------[ cut here ]------------
[22652.437898] WARNING: at net/mac80211/rx.c:2234 __ieee80211_rx+0x85/0x53e [mac80211]()
[22652.437904] Hardware name: MacBookPro1,1
[22652.437908] Modules linked in: ipt_REJECT nf_conntrack_ipv4 nf_defrag_ipv4 iptable_filter ip_tables nf_conntrack_ftp ip6t_REJECT xt_tcpudp nf_conntrack_ipv6 xt_state nf_conntrack ip6table_filter ip6_tables x_tables ath5k mac80211 cfg80211 video [last unloaded: scsi_wait_scan]
[22652.437952] Pid: 23, comm: sirq-tasklet/1 Tainted: G        W  2.6.29-rc4-rt2-tip #57
[22652.437958] Call Trace:
[22652.437970]  [<c0451e50>] warn_slowpath+0x8a/0xd3
[22652.437981]  [<c0665165>] ? plist_add+0x73/0x8e
[22652.437990]  [<c0447d8e>] ? enqueue_pushable_task+0x62/0x79
[22652.437999]  [<c04480f1>] ? enqueue_task_rt+0x203/0x247
[22652.438029]  [<f90e78bf>] __ieee80211_rx+0x85/0x53e [mac80211]
[22652.438039]  [<c09aafaa>] ? __spin_unlock_irq+0x1e/0x44
[22652.438057]  [<f92e14af>] ath5k_tasklet_rx+0x406/0x457 [ath5k]
[22652.438067]  [<c045787e>] __tasklet_action+0x8c/0x100
[22652.438075]  [<c04579d8>] tasklet_action+0x67/0x7f
[22652.438083]  [<c04575e3>] ksoftirqd+0x12d/0x223
[22652.438091]  [<c04574b6>] ? ksoftirqd+0x0/0x223
[22652.438099]  [<c0467022>] kthread+0x4a/0x82
[22652.438106]  [<c0466fd8>] ? kthread+0x0/0x82
[22652.438114]  [<c0420b67>] kernel_thread_helper+0x7/0x10
[22652.438120] ---[ end trace a7919e7f17c0a727 ]---



^ permalink raw reply	[flat|nested] 359+ messages in thread

* Re: [Announce] 2.6.29-rc4-rt2
  2009-02-21 17:04   ` Thomas Meyer
  2009-02-21 17:19       ` Frederic Weisbecker
@ 2009-02-21 17:19       ` Frederic Weisbecker
  0 siblings, 0 replies; 359+ messages in thread
From: Frederic Weisbecker @ 2009-02-21 17:19 UTC (permalink / raw)
  To: Thomas Meyer
  Cc: Thomas Gleixner, Thomas Gleixner, LKML, rt-users, Ingo Molnar,
	Steven Rostedt, Peter Zijlstra, Carsten Emde, Clark Williams,
	ath5k-devel, linux-wireless

On Sat, Feb 21, 2009 at 06:04:22PM +0100, Thomas Meyer wrote:
> Am Donnerstag, den 12.02.2009, 23:56 +0100 schrieb Thomas Gleixner:
> > We are pleased to announce the first update to our new preempt-rt
> > series. It fixes the reported bugs and some more.
> > 
> > Download locations:
> > 
> >    http://rt.et.redhat.com/download/
> >    http://www.kernel.org/pub/linux/kernel/projects/rt/
> >  
> > Information on the RT patch can be found at:
> > 
> >   http://rt.wiki.kernel.org/index.php/Main_Page
> > 
> > to build the 2.6.29-rc4-rt2 tree, the following patches should be
> > applied:
> > 
> >   http://www.kernel.org/pub/linux/kernel/v2.6/testing/linux-2.6.29-rc4.tar.bz2
> >   http://www.kernel.org/pub/linux/kernel/projects/rt/patch-2.6.29-rc4-rt2.bz2
> > 
> > The broken out patches are also available at the same download
> > locations.
> > 
> > Enjoy !
> > 
> >       Thomas, Ingo
> > --
> 
> Hi,
> 
> I got this warning, that i never saw before with a non rt-preempt
> kernel. But maybe it's just coincidence...
> 
> [22652.437889] ------------[ cut here ]------------
> [22652.437898] WARNING: at net/mac80211/rx.c:2234 __ieee80211_rx+0x85/0x53e [mac80211]()
> [22652.437904] Hardware name: MacBookPro1,1
> [22652.437908] Modules linked in: ipt_REJECT nf_conntrack_ipv4 nf_defrag_ipv4 iptable_filter ip_tables nf_conntrack_ftp ip6t_REJECT xt_tcpudp nf_conntrack_ipv6 xt_state nf_conntrack ip6table_filter ip6_tables x_tables ath5k mac80211 cfg80211 video [last unloaded: scsi_wait_scan]
> [22652.437952] Pid: 23, comm: sirq-tasklet/1 Tainted: G        W  2.6.29-rc4-rt2-tip #57
> [22652.437958] Call Trace:
> [22652.437970]  [<c0451e50>] warn_slowpath+0x8a/0xd3
> [22652.437981]  [<c0665165>] ? plist_add+0x73/0x8e
> [22652.437990]  [<c0447d8e>] ? enqueue_pushable_task+0x62/0x79
> [22652.437999]  [<c04480f1>] ? enqueue_task_rt+0x203/0x247
> [22652.438029]  [<f90e78bf>] __ieee80211_rx+0x85/0x53e [mac80211]
> [22652.438039]  [<c09aafaa>] ? __spin_unlock_irq+0x1e/0x44
> [22652.438057]  [<f92e14af>] ath5k_tasklet_rx+0x406/0x457 [ath5k]
> [22652.438067]  [<c045787e>] __tasklet_action+0x8c/0x100
> [22652.438075]  [<c04579d8>] tasklet_action+0x67/0x7f
> [22652.438083]  [<c04575e3>] ksoftirqd+0x12d/0x223
> [22652.438091]  [<c04574b6>] ? ksoftirqd+0x0/0x223
> [22652.438099]  [<c0467022>] kthread+0x4a/0x82
> [22652.438106]  [<c0466fd8>] ? kthread+0x0/0x82
> [22652.438114]  [<c0420b67>] kernel_thread_helper+0x7/0x10
> [22652.438120] ---[ end trace a7919e7f17c0a727 ]---
> 


Hi,

It's an known issue on ath5k (or 80211):
http://patchwork.kernel.org/patch/1169/

So not preempt-rt related. Perhaps it has been fixed in -rc5.

 
> --
> To unsubscribe from this list: send the line "unsubscribe linux-rt-users" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html


^ permalink raw reply	[flat|nested] 359+ messages in thread

* Re: [Announce] 2.6.29-rc4-rt2
@ 2009-02-21 17:19       ` Frederic Weisbecker
  0 siblings, 0 replies; 359+ messages in thread
From: Frederic Weisbecker @ 2009-02-21 17:19 UTC (permalink / raw)
  To: Thomas Meyer
  Cc: Thomas Gleixner, Thomas Gleixner, LKML, rt-users, Ingo Molnar,
	Steven Rostedt, Peter Zijlstra, Carsten Emde, Clark Williams,
	ath5k-devel, linux-wireless

On Sat, Feb 21, 2009 at 06:04:22PM +0100, Thomas Meyer wrote:
> Am Donnerstag, den 12.02.2009, 23:56 +0100 schrieb Thomas Gleixner:
> > We are pleased to announce the first update to our new preempt-rt
> > series. It fixes the reported bugs and some more.
> > 
> > Download locations:
> > 
> >    http://rt.et.redhat.com/download/
> >    http://www.kernel.org/pub/linux/kernel/projects/rt/
> >  
> > Information on the RT patch can be found at:
> > 
> >   http://rt.wiki.kernel.org/index.php/Main_Page
> > 
> > to build the 2.6.29-rc4-rt2 tree, the following patches should be
> > applied:
> > 
> >   http://www.kernel.org/pub/linux/kernel/v2.6/testing/linux-2.6.29-rc4.tar.bz2
> >   http://www.kernel.org/pub/linux/kernel/projects/rt/patch-2.6.29-rc4-rt2.bz2
> > 
> > The broken out patches are also available at the same download
> > locations.
> > 
> > Enjoy !
> > 
> >       Thomas, Ingo
> > --
> 
> Hi,
> 
> I got this warning, that i never saw before with a non rt-preempt
> kernel. But maybe it's just coincidence...
> 
> [22652.437889] ------------[ cut here ]------------
> [22652.437898] WARNING: at net/mac80211/rx.c:2234 __ieee80211_rx+0x85/0x53e [mac80211]()
> [22652.437904] Hardware name: MacBookPro1,1
> [22652.437908] Modules linked in: ipt_REJECT nf_conntrack_ipv4 nf_defrag_ipv4 iptable_filter ip_tables nf_conntrack_ftp ip6t_REJECT xt_tcpudp nf_conntrack_ipv6 xt_state nf_conntrack ip6table_filter ip6_tables x_tables ath5k mac80211 cfg80211 video [last unloaded: scsi_wait_scan]
> [22652.437952] Pid: 23, comm: sirq-tasklet/1 Tainted: G        W  2.6.29-rc4-rt2-tip #57
> [22652.437958] Call Trace:
> [22652.437970]  [<c0451e50>] warn_slowpath+0x8a/0xd3
> [22652.437981]  [<c0665165>] ? plist_add+0x73/0x8e
> [22652.437990]  [<c0447d8e>] ? enqueue_pushable_task+0x62/0x79
> [22652.437999]  [<c04480f1>] ? enqueue_task_rt+0x203/0x247
> [22652.438029]  [<f90e78bf>] __ieee80211_rx+0x85/0x53e [mac80211]
> [22652.438039]  [<c09aafaa>] ? __spin_unlock_irq+0x1e/0x44
> [22652.438057]  [<f92e14af>] ath5k_tasklet_rx+0x406/0x457 [ath5k]
> [22652.438067]  [<c045787e>] __tasklet_action+0x8c/0x100
> [22652.438075]  [<c04579d8>] tasklet_action+0x67/0x7f
> [22652.438083]  [<c04575e3>] ksoftirqd+0x12d/0x223
> [22652.438091]  [<c04574b6>] ? ksoftirqd+0x0/0x223
> [22652.438099]  [<c0467022>] kthread+0x4a/0x82
> [22652.438106]  [<c0466fd8>] ? kthread+0x0/0x82
> [22652.438114]  [<c0420b67>] kernel_thread_helper+0x7/0x10
> [22652.438120] ---[ end trace a7919e7f17c0a727 ]---
> 


Hi,

It's an known issue on ath5k (or 80211):
http://patchwork.kernel.org/patch/1169/

So not preempt-rt related. Perhaps it has been fixed in -rc5.

 
> --
> To unsubscribe from this list: send the line "unsubscribe linux-rt-users" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html


^ permalink raw reply	[flat|nested] 359+ messages in thread

* Re: [Announce] 2.6.29-rc4-rt2
@ 2009-02-21 17:19       ` Frederic Weisbecker
  0 siblings, 0 replies; 359+ messages in thread
From: Frederic Weisbecker @ 2009-02-21 17:19 UTC (permalink / raw)
  To: Thomas Meyer
  Cc: Thomas Gleixner, Thomas Gleixner, LKML, rt-users, Ingo Molnar,
	Steven Rostedt, Peter Zijlstra, Carsten Emde, Clark Williams,
	ath5k-devel-xDcbHBWguxEUs3QNXV6qNA,
	linux-wireless-u79uwXL29TY76Z2rM5mHXA

On Sat, Feb 21, 2009 at 06:04:22PM +0100, Thomas Meyer wrote:
> Am Donnerstag, den 12.02.2009, 23:56 +0100 schrieb Thomas Gleixner:
> > We are pleased to announce the first update to our new preempt-rt
> > series. It fixes the reported bugs and some more.
> > 
> > Download locations:
> > 
> >    http://rt.et.redhat.com/download/
> >    http://www.kernel.org/pub/linux/kernel/projects/rt/
> >  
> > Information on the RT patch can be found at:
> > 
> >   http://rt.wiki.kernel.org/index.php/Main_Page
> > 
> > to build the 2.6.29-rc4-rt2 tree, the following patches should be
> > applied:
> > 
> >   http://www.kernel.org/pub/linux/kernel/v2.6/testing/linux-2.6.29-rc4.tar.bz2
> >   http://www.kernel.org/pub/linux/kernel/projects/rt/patch-2.6.29-rc4-rt2.bz2
> > 
> > The broken out patches are also available at the same download
> > locations.
> > 
> > Enjoy !
> > 
> >       Thomas, Ingo
> > --
> 
> Hi,
> 
> I got this warning, that i never saw before with a non rt-preempt
> kernel. But maybe it's just coincidence...
> 
> [22652.437889] ------------[ cut here ]------------
> [22652.437898] WARNING: at net/mac80211/rx.c:2234 __ieee80211_rx+0x85/0x53e [mac80211]()
> [22652.437904] Hardware name: MacBookPro1,1
> [22652.437908] Modules linked in: ipt_REJECT nf_conntrack_ipv4 nf_defrag_ipv4 iptable_filter ip_tables nf_conntrack_ftp ip6t_REJECT xt_tcpudp nf_conntrack_ipv6 xt_state nf_conntrack ip6table_filter ip6_tables x_tables ath5k mac80211 cfg80211 video [last unloaded: scsi_wait_scan]
> [22652.437952] Pid: 23, comm: sirq-tasklet/1 Tainted: G        W  2.6.29-rc4-rt2-tip #57
> [22652.437958] Call Trace:
> [22652.437970]  [<c0451e50>] warn_slowpath+0x8a/0xd3
> [22652.437981]  [<c0665165>] ? plist_add+0x73/0x8e
> [22652.437990]  [<c0447d8e>] ? enqueue_pushable_task+0x62/0x79
> [22652.437999]  [<c04480f1>] ? enqueue_task_rt+0x203/0x247
> [22652.438029]  [<f90e78bf>] __ieee80211_rx+0x85/0x53e [mac80211]
> [22652.438039]  [<c09aafaa>] ? __spin_unlock_irq+0x1e/0x44
> [22652.438057]  [<f92e14af>] ath5k_tasklet_rx+0x406/0x457 [ath5k]
> [22652.438067]  [<c045787e>] __tasklet_action+0x8c/0x100
> [22652.438075]  [<c04579d8>] tasklet_action+0x67/0x7f
> [22652.438083]  [<c04575e3>] ksoftirqd+0x12d/0x223
> [22652.438091]  [<c04574b6>] ? ksoftirqd+0x0/0x223
> [22652.438099]  [<c0467022>] kthread+0x4a/0x82
> [22652.438106]  [<c0466fd8>] ? kthread+0x0/0x82
> [22652.438114]  [<c0420b67>] kernel_thread_helper+0x7/0x10
> [22652.438120] ---[ end trace a7919e7f17c0a727 ]---
> 


Hi,

It's an known issue on ath5k (or 80211):
http://patchwork.kernel.org/patch/1169/

So not preempt-rt related. Perhaps it has been fixed in -rc5.

 
> --
> To unsubscribe from this list: send the line "unsubscribe linux-rt-users" in
> the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html

--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

^ permalink raw reply	[flat|nested] 359+ messages in thread

* Re: [Announce] 2.6.29-rc4-rt2
  2009-02-12 22:56 ` [Announce] 2.6.29-rc4-rt2 Thomas Gleixner
                     ` (4 preceding siblings ...)
  2009-02-21 17:04   ` Thomas Meyer
@ 2009-02-22 13:20   ` Thomas Meyer
  2009-02-23 19:44   ` [Announce] 2.6.29-rc6-rt2 Thomas Gleixner
  6 siblings, 0 replies; 359+ messages in thread
From: Thomas Meyer @ 2009-02-22 13:20 UTC (permalink / raw)
  To: Thomas Gleixner
  Cc: Thomas Gleixner, LKML, rt-users, Ingo Molnar, Steven Rostedt,
	Peter Zijlstra, Carsten Emde, Clark Williams

Am Donnerstag, den 12.02.2009, 23:56 +0100 schrieb Thomas Gleixner:
> We are pleased to announce the first update to our new preempt-rt
> series. It fixes the reported bugs and some more.
> 
> Download locations:
> 
>    http://rt.et.redhat.com/download/
>    http://www.kernel.org/pub/linux/kernel/projects/rt/
>  
> Information on the RT patch can be found at:
> 
>   http://rt.wiki.kernel.org/index.php/Main_Page
> 
> to build the 2.6.29-rc4-rt2 tree, the following patches should be
> applied:
> 
>   http://www.kernel.org/pub/linux/kernel/v2.6/testing/linux-2.6.29-rc4.tar.bz2
>   http://www.kernel.org/pub/linux/kernel/projects/rt/patch-2.6.29-rc4-rt2.bz2
> 
> The broken out patches are also available at the same download
> locations.
> 
> Enjoy !
> 
>       Thomas, Ingo

Hi,

Is this one probably rt-preempt related?

BUG: unable to handle kernel paging request at 00100100
IP: [<f8aa431c>] __nf_conntrack_find+0xd6/0x109 [nf_conntrack]
*pde = 34ece067 *pte = 00000000 
Oops: 0000 [#1] PREEMPT SMP 
last sysfs file: /sys/devices/LNXSYSTM:00/device:00/PNP0C0A:00/power_supply/BAT0/energy_full
Modules linked in: nf_conntrack_ipv4 nf_defrag_ipv4 nf_conntrack_ftp nf_conntrack_ipv6 xt_state nf_conntrack ath5k mac80211 cfg80211 video [last unloaded: scsi_wait_scan]

Pid: 5, comm: sirq-timer/0 Tainted: G        W  (2.6.29-rc4-rt2-tip #60) MacBookPro1,1
EIP: 0060:[<f8aa431c>] EFLAGS: 00010206 CPU: 0
EIP is at __nf_conntrack_find+0xd6/0x109 [nf_conntrack]
EAX: f4853240 EBX: f7053d38 ECX: 00100100 EDX: f4f5c640
ESI: ea190868 EDI: c0e07ec0 EBP: f7053cc8 ESP: f7053cb8
 DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 preempt:00000001
Process sirq-timer/0 (pid: 5, ti=f7053000 task=f7064dc0 task.ti=f7053000)
Stack:
 985792de f7053d38 c0e07ec0 c0e07ec0 f7053ce0 f8aa4731 985792de f7053d38
 f8ba3bb8 c0e07ec0 f7053d70 f8aa59c5 f6b81a00 f1ec5ef4 00000003 00000002
 f8ab132c 00000014 f7053d94 00000014 f7053d30 06053d4e f5a92000 f67f2980
Call Trace:
 [<f8aa4731>] ? nf_conntrack_find_get+0x26/0x75 [nf_conntrack]
 [<f8aa59c5>] ? nf_conntrack_in+0x15a/0x45d [nf_conntrack]
 [<f8ba2472>] ? ipv4_conntrack_local+0x3d/0x58 [nf_conntrack_ipv4]
 [<c089cdaf>] ? nf_iterate+0x4f/0x93
 [<c08b3938>] ? dst_output+0x0/0x2b
 [<c08b3938>] ? dst_output+0x0/0x2b
 [<c089cf84>] ? nf_hook_slow+0x65/0xd3
 [<c08b3938>] ? dst_output+0x0/0x2b
 [<c08b3938>] ? dst_output+0x0/0x2b
 [<c08b5292>] ? __ip_local_out+0x9f/0xba
 [<c08b3938>] ? dst_output+0x0/0x2b
 [<c08b52c8>] ? ip_local_out+0x1b/0x3d
 [<c08b5b31>] ? ip_queue_xmit+0x2cf/0x358
 [<c0442c7c>] ? enqueue_task+0x70/0x8e
 [<c08ca3de>] ? tcp_v4_send_check+0x85/0xd0
 [<c08c680e>] ? tcp_transmit_skb+0x5f9/0x642
 [<c08c5d35>] ? tcp_current_mss+0x66/0xeb
 [<c08c81b0>] ? tcp_retransmit_skb+0x4f2/0x632
 [<c08c99b0>] ? tcp_write_timer+0x3c2/0x592
 [<c045c17c>] ? run_timer_softirq+0x201/0x2a3
 [<c08c95ee>] ? tcp_write_timer+0x0/0x592
 [<c08c95ee>] ? tcp_write_timer+0x0/0x592
 [<c04575e3>] ? ksoftirqd+0x12d/0x223
 [<c04574b6>] ? ksoftirqd+0x0/0x223
 [<c0467022>] ? kthread+0x4a/0x82
 [<c0466fd8>] ? kthread+0x0/0x82
 [<c0420b67>] ? kernel_thread_helper+0x7/0x10
Code: 8b 97 30 03 00 00 74 10 f7 d2 64 a1 b4 64 d6 c0 8b 04 82 ff 40 04 eb 2d f7 d2 64 a1 b4 64 d6 c0 8b 04 82 ff 00 8b 09 85 c9 74 18 <8b> 01 0f 18 00 90 8b 03 89 ce 3b 41 08 0f 85 78 ff ff ff e9 4d 
EIP: [<f8aa431c>] __nf_conntrack_find+0xd6/0x109 [nf_conntrack] SS:ESP 0068:f7053cb8
---[ end trace a7919e7f17c0a727 ]---



^ permalink raw reply	[flat|nested] 359+ messages in thread

* [Announce] 2.6.29-rc6-rt2
  2009-02-12 22:56 ` [Announce] 2.6.29-rc4-rt2 Thomas Gleixner
                     ` (5 preceding siblings ...)
  2009-02-22 13:20   ` Thomas Meyer
@ 2009-02-23 19:44   ` Thomas Gleixner
  2009-02-24 17:51     ` Thomas Gleixner
  6 siblings, 1 reply; 359+ messages in thread
From: Thomas Gleixner @ 2009-02-23 19:44 UTC (permalink / raw)
  To: LKML
  Cc: rt-users, Ingo Molnar, Steven Rostedt, Peter Zijlstra,
	Carsten Emde, Clark Williams

We are pleased to announce the next update to our new preempt-rt
series. It forwards to 2.6.29-rc6 and fixes

	- various 32bit highmem related problems
	- paravirt interaction
	- sg list warnings
	- IPI updates
	 
Download locations:
 
    http://rt.et.redhat.com/download/
    http://www.kernel.org/pub/linux/kernel/projects/rt/
  
Information on the RT patch can be found at:

   http://rt.wiki.kernel.org/index.php/Main_Page

to build the 2.6.29-rc6-rt2 tree, the following patches should be
applied:

  http://www.kernel.org/pub/linux/kernel/v2.6/testing/linux-2.6.29-rc6.tar.bz2
  http://www.kernel.org/pub/linux/kernel/projects/rt/patch-2.6.29-rc6-rt2.bz2
 
The broken out patches are also available at the same download
locations.

Enjoy !

      Thomas, Ingo

^ permalink raw reply	[flat|nested] 359+ messages in thread

* Re: [Announce] 2.6.29-rc6-rt2
  2009-02-23 19:44   ` [Announce] 2.6.29-rc6-rt2 Thomas Gleixner
@ 2009-02-24 17:51     ` Thomas Gleixner
  2009-02-24 17:57       ` [Announce] 2.6.29-rc6-rt3 Thomas Gleixner
  0 siblings, 1 reply; 359+ messages in thread
From: Thomas Gleixner @ 2009-02-24 17:51 UTC (permalink / raw)
  To: LKML
  Cc: rt-users, Ingo Molnar, Steven Rostedt, Peter Zijlstra,
	Carsten Emde, Clark Williams

We are pleased to announce the next update to our new preempt-rt
series. It contains only one new patch:
 
  - fix the nf_conntrack bug, which was reported by various folks

Download locations:
 
    http://rt.et.redhat.com/download/
    http://www.kernel.org/pub/linux/kernel/projects/rt/
  
Information on the RT patch can be found at:

   http://rt.wiki.kernel.org/index.php/Main_Page

to build the 2.6.29-rc6-rt3 tree, the following patches should be
applied:

  http://www.kernel.org/pub/linux/kernel/v2.6/testing/linux-2.6.29-rc6.tar.bz2
  http://www.kernel.org/pub/linux/kernel/projects/rt/patch-2.6.29-rc6-rt3.bz2
  
The broken out patches are also available at the same download
locations.

Enjoy !

      tglx

^ permalink raw reply	[flat|nested] 359+ messages in thread

* [Announce] 2.6.29-rc6-rt3
  2009-02-24 17:51     ` Thomas Gleixner
@ 2009-02-24 17:57       ` Thomas Gleixner
  2009-02-25 19:34         ` Thomas Meyer
                           ` (2 more replies)
  0 siblings, 3 replies; 359+ messages in thread
From: Thomas Gleixner @ 2009-02-24 17:57 UTC (permalink / raw)
  To: LKML
  Cc: rt-users, Ingo Molnar, Steven Rostedt, Peter Zijlstra,
	Carsten Emde, Clark Williams

We are pleased to announce the next update to our new preempt-rt
series. It contains only one new patch:
  
  - fix the nf_conntrack bug, which was reported by various folks

Download locations:
 
    http://rt.et.redhat.com/download/
    http://www.kernel.org/pub/linux/kernel/projects/rt/
  
Information on the RT patch can be found at:

    http://rt.wiki.kernel.org/index.php/Main_Page

to build the 2.6.29-rc6-rt3 tree, the following patches should be
applied:

  http://www.kernel.org/pub/linux/kernel/v2.6/testing/linux-2.6.29-rc6.tar.bz2
  http://www.kernel.org/pub/linux/kernel/projects/rt/patch-2.6.29-rc6-rt3.bz2
  
The broken out patches are also available at the same download
locations.

Enjoy !

      tglx

^ permalink raw reply	[flat|nested] 359+ messages in thread

* Re: [Announce] 2.6.29-rc6-rt3
  2009-02-25 19:34         ` Thomas Meyer
@ 2009-02-25 18:43           ` Peter Zijlstra
  2009-02-26 18:46             ` Thomas Meyer
  0 siblings, 1 reply; 359+ messages in thread
From: Peter Zijlstra @ 2009-02-25 18:43 UTC (permalink / raw)
  To: Thomas Meyer
  Cc: Thomas Gleixner, LKML, rt-users, Ingo Molnar, Steven Rostedt,
	Carsten Emde, Clark Williams

On Wed, 2009-02-25 at 20:34 +0100, Thomas Meyer wrote:
> Am Dienstag, den 24.02.2009, 18:57 +0100 schrieb Thomas Gleixner:

> >   http://www.kernel.org/pub/linux/kernel/v2.6/testing/linux-2.6.29-rc6.tar.bz2
> >   http://www.kernel.org/pub/linux/kernel/projects/rt/patch-2.6.29-rc6-rt3.bz2
> >   

> Should suspend&resume to ram work with this patchset applied?

If it works for you without (plain .29-rc6), then it ought to work with.


^ permalink raw reply	[flat|nested] 359+ messages in thread

* Re: [Announce] 2.6.29-rc6-rt3
  2009-02-24 17:57       ` [Announce] 2.6.29-rc6-rt3 Thomas Gleixner
@ 2009-02-25 19:34         ` Thomas Meyer
  2009-02-25 18:43           ` Peter Zijlstra
  2009-03-06 22:23         ` Cliff Brake
  2009-03-12 19:17         ` [Announce] 2.6.29-rc7-rt1 Thomas Gleixner
  2 siblings, 1 reply; 359+ messages in thread
From: Thomas Meyer @ 2009-02-25 19:34 UTC (permalink / raw)
  To: Thomas Gleixner
  Cc: LKML, rt-users, Ingo Molnar, Steven Rostedt, Peter Zijlstra,
	Carsten Emde, Clark Williams

Am Dienstag, den 24.02.2009, 18:57 +0100 schrieb Thomas Gleixner:
> We are pleased to announce the next update to our new preempt-rt
> series. It contains only one new patch:
>   
>   - fix the nf_conntrack bug, which was reported by various folks
> 
> Download locations:
>  
>     http://rt.et.redhat.com/download/
>     http://www.kernel.org/pub/linux/kernel/projects/rt/
>   
> Information on the RT patch can be found at:
> 
>     http://rt.wiki.kernel.org/index.php/Main_Page
> 
> to build the 2.6.29-rc6-rt3 tree, the following patches should be
> applied:
> 
>   http://www.kernel.org/pub/linux/kernel/v2.6/testing/linux-2.6.29-rc6.tar.bz2
>   http://www.kernel.org/pub/linux/kernel/projects/rt/patch-2.6.29-rc6-rt3.bz2
>   
> The broken out patches are also available at the same download
> locations.
> 
> Enjoy !
> 
>       tglx

Hi,

Should suspend&resume to ram work with this patchset applied?

greets
thomas



^ permalink raw reply	[flat|nested] 359+ messages in thread

* Re: [Announce] 2.6.29-rc6-rt3
  2009-02-25 18:43           ` Peter Zijlstra
@ 2009-02-26 18:46             ` Thomas Meyer
  0 siblings, 0 replies; 359+ messages in thread
From: Thomas Meyer @ 2009-02-26 18:46 UTC (permalink / raw)
  To: Peter Zijlstra
  Cc: Thomas Gleixner, LKML, rt-users, Ingo Molnar, Steven Rostedt,
	Carsten Emde, Clark Williams

Am Mittwoch, den 25.02.2009, 19:43 +0100 schrieb Peter Zijlstra:
> On Wed, 2009-02-25 at 20:34 +0100, Thomas Meyer wrote:
> > Am Dienstag, den 24.02.2009, 18:57 +0100 schrieb Thomas Gleixner:
> 
> > >   http://www.kernel.org/pub/linux/kernel/v2.6/testing/linux-2.6.29-rc6.tar.bz2
> > >   http://www.kernel.org/pub/linux/kernel/projects/rt/patch-2.6.29-rc6-rt3.bz2
> > >   
> 
> > Should suspend&resume to ram work with this patchset applied?
> 
> If it works for you without (plain .29-rc6), then it ought to work with.
> 

plain .29-rc6 suspends and resumes just fine.
but .29-rc6-rt3 suspends just fine, but never resumes.
Is there an early_dma thing for the resume path for 1394?

greets
thomas



^ permalink raw reply	[flat|nested] 359+ messages in thread

* Re: [Announce] 2.6.29-rc6-rt3
  2009-02-24 17:57       ` [Announce] 2.6.29-rc6-rt3 Thomas Gleixner
  2009-02-25 19:34         ` Thomas Meyer
@ 2009-03-06 22:23         ` Cliff Brake
  2009-03-07 10:20           ` Peter Zijlstra
  2009-03-12 19:17         ` [Announce] 2.6.29-rc7-rt1 Thomas Gleixner
  2 siblings, 1 reply; 359+ messages in thread
From: Cliff Brake @ 2009-03-06 22:23 UTC (permalink / raw)
  To: Thomas Gleixner
  Cc: rt-users, Ingo Molnar, Steven Rostedt, Peter Zijlstra,
	Carsten Emde, Clark Williams

On Tue, Feb 24, 2009 at 12:57 PM, Thomas Gleixner <tglx@linutronix.de> wrote:
> We are pleased to announce the next update to our new preempt-rt

What is the issues with JFFS2?

--- linux-2.6-tip.orig/fs/jffs2/Kconfig
+++ linux-2.6-tip/fs/jffs2/Kconfig
@@ -2,6 +2,8 @@ config JFFS2_FS
 	tristate "Journalling Flash File System v2 (JFFS2) support"
 	select CRC32
 	depends on MTD
+	# build breakage
+	depends on 0
 	help
 	  JFFS2 is the second generation of the Journalling Flash File System
 	  for use on diskless embedded devices. It provides improved wear


Thanks,
Cliff

^ permalink raw reply	[flat|nested] 359+ messages in thread

* Re: [Announce] 2.6.29-rc6-rt3
  2009-03-06 22:23         ` Cliff Brake
@ 2009-03-07 10:20           ` Peter Zijlstra
  2009-03-08 10:25             ` Ingo Molnar
  0 siblings, 1 reply; 359+ messages in thread
From: Peter Zijlstra @ 2009-03-07 10:20 UTC (permalink / raw)
  To: Cliff Brake
  Cc: Thomas Gleixner, rt-users, Ingo Molnar, Steven Rostedt,
	Carsten Emde, Clark Williams

On Fri, 2009-03-06 at 17:23 -0500, Cliff Brake wrote:
> On Tue, Feb 24, 2009 at 12:57 PM, Thomas Gleixner <tglx@linutronix.de> wrote:
> > We are pleased to announce the next update to our new preempt-rt
> 
> What is the issues with JFFS2?
> 
> --- linux-2.6-tip.orig/fs/jffs2/Kconfig
> +++ linux-2.6-tip/fs/jffs2/Kconfig
> @@ -2,6 +2,8 @@ config JFFS2_FS
>  	tristate "Journalling Flash File System v2 (JFFS2) support"
>  	select CRC32
>  	depends on MTD
> +	# build breakage
> +	depends on 0
>  	help
>  	  JFFS2 is the second generation of the Journalling Flash File System
>  	  for use on diskless embedded devices. It provides improved wear

Comment implies build breakage, remove this and try to compile the thing
seems like the easiest way to answer your question.

I'm sure Thomas will appreciate any patches to fix the resulting
borkage.


^ permalink raw reply	[flat|nested] 359+ messages in thread

* Re: [Announce] 2.6.29-rc6-rt3
  2009-03-07 10:20           ` Peter Zijlstra
@ 2009-03-08 10:25             ` Ingo Molnar
  2009-03-09 15:44               ` Cliff Brake
  0 siblings, 1 reply; 359+ messages in thread
From: Ingo Molnar @ 2009-03-08 10:25 UTC (permalink / raw)
  To: Peter Zijlstra
  Cc: Cliff Brake, Thomas Gleixner, rt-users, Steven Rostedt,
	Carsten Emde, Clark Williams

[-- Attachment #1: Type: text/plain, Size: 2146 bytes --]


* Peter Zijlstra <peterz@infradead.org> wrote:

> On Fri, 2009-03-06 at 17:23 -0500, Cliff Brake wrote:
> > On Tue, Feb 24, 2009 at 12:57 PM, Thomas Gleixner <tglx@linutronix.de> wrote:
> > > We are pleased to announce the next update to our new preempt-rt
> > 
> > What is the issues with JFFS2?
> > 
> > --- linux-2.6-tip.orig/fs/jffs2/Kconfig
> > +++ linux-2.6-tip/fs/jffs2/Kconfig
> > @@ -2,6 +2,8 @@ config JFFS2_FS
> >  	tristate "Journalling Flash File System v2 (JFFS2) support"
> >  	select CRC32
> >  	depends on MTD
> > +	# build breakage
> > +	depends on 0
> >  	help
> >  	  JFFS2 is the second generation of the Journalling Flash File System
> >  	  for use on diskless embedded devices. It provides improved wear
> 
> Comment implies build breakage, remove this and try to compile the thing
> seems like the easiest way to answer your question.
> 
> I'm sure Thomas will appreciate any patches to fix the resulting
> borkage.

the full commit is the one below. I've attached the bad config - 
the build bug might have been fixed meanwhile.

	Ingo

--------------->
>From 50f971ad73ea9550b1d8e34006bd11c7e108b24f Mon Sep 17 00:00:00 2001
From: Ingo Molnar <mingo@elte.hu>
Date: Wed, 22 Oct 2008 06:15:21 +0200
Subject: [PATCH] qa: disable jffs2 for now

fs/jffs2/nodemgmt.c: In function 'jffs2_find_nextblock':
fs/jffs2/nodemgmt.c:265: error: 'struct jffs2_sb_info' has no member named 'wbuf_ofs'
fs/jffs2/nodemgmt.c:265: error: 'struct jffs2_sb_info' has no member named 'wbuf_len'
fs/jffs2/nodemgmt.c:266: error: 'struct jffs2_sb_info' has no member named 'wbuf_ofs'

with config-Wed_Oct_22_05_12_21_CEST_2008.bad
---
 fs/jffs2/Kconfig |    2 ++
 1 files changed, 2 insertions(+), 0 deletions(-)

diff --git a/fs/jffs2/Kconfig b/fs/jffs2/Kconfig
index 6ae169c..087383f 100644
--- a/fs/jffs2/Kconfig
+++ b/fs/jffs2/Kconfig
@@ -2,6 +2,8 @@ config JFFS2_FS
 	tristate "Journalling Flash File System v2 (JFFS2) support"
 	select CRC32
 	depends on MTD
+	# build breakage
+	depends on 0
 	help
 	  JFFS2 is the second generation of the Journalling Flash File System
 	  for use on diskless embedded devices. It provides improved wear

[-- Attachment #2: config-Wed_Oct_22_05_12_21_CEST_2008.bad --]
[-- Type: text/plain, Size: 44185 bytes --]

# c55c1351
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.27
# Wed Oct 22 05:12:21 2008
#
CONFIG_64BIT=y
# CONFIG_X86_32 is not set
CONFIG_X86_64=y
CONFIG_X86=y
CONFIG_ARCH_DEFCONFIG="arch/x86/configs/x86_64_defconfig"
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_CLOCKSOURCE_WATCHDOG=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_FAST_CMPXCHG_LOCAL=y
CONFIG_MMU=y
CONFIG_ZONE_DMA=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_IOMAP=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_GPIO=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_ARCH_HAS_CPU_RELAX=y
CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
# CONFIG_HAVE_CPUMASK_OF_CPU_MAP is not set
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_ZONE_DMA32=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_AUDIT_ARCH=y
CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_X86_BIOS_REBOOT=y
# CONFIG_KTIME_SCALAR is not set
CONFIG_BOOTPARAM_SUPPORT_NOT_WANTED=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"

#
# General setup
#
CONFIG_EXPERIMENTAL=y
CONFIG_BROKEN_BOOT_ALLOWED4=y
CONFIG_BROKEN_BOOT_ALLOWED3=y
CONFIG_BROKEN_BOOT_ALLOWED2=y
CONFIG_BROKEN_BOOT_ALLOWED=y
CONFIG_BROKEN_BOOT=y
CONFIG_BROKEN_BOOT_EUROPE=y
CONFIG_BROKEN_BOOT_TITAN=y
CONFIG_BROKEN_ON_SMP=y
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
# CONFIG_POSIX_MQUEUE is not set
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BSD_PROCESS_ACCT_V3=y
CONFIG_TASKSTATS=y
CONFIG_TASK_DELAY_ACCT=y
# CONFIG_TASK_XACCT is not set
# CONFIG_AUDIT is not set
CONFIG_IKCONFIG=y
# CONFIG_IKCONFIG_PROC is not set
CONFIG_LOG_BUF_SHIFT=21
# CONFIG_CGROUPS is not set
CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
# CONFIG_GROUP_SCHED is not set
CONFIG_RELAY=y
CONFIG_NAMESPACES=y
# CONFIG_UTS_NS is not set
CONFIG_IPC_NS=y
CONFIG_USER_NS=y
CONFIG_PID_NS=y
# CONFIG_BLK_DEV_INITRD is not set
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
CONFIG_KALLSYMS_EXTRA_PASS=y
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_PCSPKR_PLATFORM=y
# CONFIG_COMPAT_BRK is not set
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
# CONFIG_SIGNALFD is not set
# CONFIG_TIMERFD is not set
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
CONFIG_PROFILING=y
CONFIG_TRACEPOINTS=y
CONFIG_MARKERS=y
# CONFIG_OPROFILE is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
CONFIG_MODULE_FORCE_LOAD=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
# CONFIG_MODVERSIONS is not set
CONFIG_MODULE_SRCVERSION_ALL=y
CONFIG_KMOD=y
CONFIG_BLOCK=y
# CONFIG_BLK_DEV_BSG is not set
CONFIG_BLK_DEV_INTEGRITY=y

#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
# CONFIG_IOSCHED_AS is not set
CONFIG_IOSCHED_DEADLINE=m
CONFIG_IOSCHED_CFQ=m
# CONFIG_DEFAULT_AS is not set
# CONFIG_DEFAULT_DEADLINE is not set
# CONFIG_DEFAULT_CFQ is not set
CONFIG_DEFAULT_NOOP=y
CONFIG_DEFAULT_IOSCHED="noop"
CONFIG_CLASSIC_RCU=y
# CONFIG_FREEZER is not set

#
# Processor type and features
#
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
# CONFIG_HIGH_RES_TIMERS is not set
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
# CONFIG_SMP_SUPPORT is not set
CONFIG_X86_FIND_SMP_CONFIG=y
CONFIG_X86_MPPARSE=y
CONFIG_UP_WANTED_1=y
CONFIG_UP_WANTED_2=y
CONFIG_UP_WANTED=y
CONFIG_X86_PC=y
# CONFIG_X86_ELAN is not set
# CONFIG_X86_VOYAGER is not set
# CONFIG_X86_GENERICARCH is not set
# CONFIG_X86_VSMP is not set
CONFIG_PARAVIRT_GUEST=y
# CONFIG_XEN is not set
CONFIG_KVM_CLOCK=y
CONFIG_KVM_GUEST=y
CONFIG_PARAVIRT=y
CONFIG_PARAVIRT_CLOCK=y
CONFIG_PARAVIRT_DEBUG=y
CONFIG_MEMTEST=y
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
# CONFIG_MPENTIUMM is not set
# CONFIG_MPENTIUM4 is not set
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
# CONFIG_MK8 is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MEFFICEON is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MGEODEGX1 is not set
# CONFIG_MGEODE_LX is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
# CONFIG_MVIAC7 is not set
# CONFIG_MPSC is not set
# CONFIG_MCORE2 is not set
CONFIG_GENERIC_CPU=y
CONFIG_X86_CPU=y
CONFIG_X86_L1_CACHE_BYTES=128
CONFIG_X86_INTERNODE_CACHE_BYTES=128
CONFIG_X86_CMPXCHG=y
CONFIG_X86_L1_CACHE_SHIFT=7
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_TSC=y
CONFIG_X86_CMPXCHG64=y
CONFIG_X86_CMOV=y
CONFIG_X86_MINIMUM_CPU_FAMILY=64
CONFIG_X86_DEBUGCTLMSR=y
# CONFIG_PROCESSOR_SELECT is not set
CONFIG_CPU_SUP_INTEL=y
CONFIG_CPU_SUP_AMD=y
CONFIG_CPU_SUP_CENTAUR_64=y
CONFIG_X86_DS=y
CONFIG_X86_PTRACE_BTS=y
CONFIG_HPET_TIMER=y
CONFIG_DMI=y
CONFIG_GART_IOMMU=y
# CONFIG_CALGARY_IOMMU is not set
CONFIG_SWIOTLB=y
CONFIG_IOMMU_HELPER=y
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS=y
# CONFIG_X86_MCE is not set
# CONFIG_I8K is not set
CONFIG_MICROCODE=y
# CONFIG_MICROCODE_INTEL is not set
CONFIG_MICROCODE_AMD=y
CONFIG_MICROCODE_OLD_INTERFACE=y
CONFIG_X86_MSR=y
CONFIG_X86_CPUID=m
CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
CONFIG_ARCH_SPARSEMEM_DEFAULT=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_ARCH_MEMORY_PROBE=y
CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000
CONFIG_SELECT_MEMORY_MODEL=y
# CONFIG_FLATMEM_MANUAL is not set
# CONFIG_DISCONTIGMEM_MANUAL is not set
CONFIG_SPARSEMEM_MANUAL=y
CONFIG_SPARSEMEM=y
CONFIG_HAVE_MEMORY_PRESENT=y
CONFIG_SPARSEMEM_EXTREME=y
CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
# CONFIG_SPARSEMEM_VMEMMAP is not set
CONFIG_MEMORY_HOTPLUG=y
CONFIG_MEMORY_HOTPLUG_SPARSE=y
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_RESOURCES_64BIT=y
CONFIG_PHYS_ADDR_T_64BIT=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
CONFIG_X86_CHECK_BIOS_CORRUPTION=y
# CONFIG_X86_BOOTPARAM_MEMORY_CORRUPTION_CHECK is not set
CONFIG_X86_RESERVE_LOW_64K=y
CONFIG_MTRR=y
CONFIG_MTRR_SANITIZER=y
CONFIG_MTRR_SANITIZER_ENABLE_DEFAULT=0
CONFIG_MTRR_SANITIZER_SPARE_REG_NR_DEFAULT=1
CONFIG_X86_PAT=y
# CONFIG_SECCOMP is not set
CONFIG_CC_STACKPROTECTOR_ALL=y
CONFIG_CC_STACKPROTECTOR=y
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
# CONFIG_SCHED_HRTICK is not set
# CONFIG_KEXEC is not set
CONFIG_CRASH_DUMP=y
CONFIG_PHYSICAL_START=0x200000
CONFIG_RELOCATABLE=y
CONFIG_PHYSICAL_ALIGN=0x200000
CONFIG_CMDLINE_BOOL=y
CONFIG_CMDLINE=""
CONFIG_CMDLINE_OVERRIDE=y
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y

#
# Power management options
#
# CONFIG_PM is not set

#
# CPU Frequency scaling
#
# CONFIG_CPU_FREQ is not set
CONFIG_CPU_IDLE=y
CONFIG_CPU_IDLE_GOV_LADDER=y
CONFIG_CPU_IDLE_GOV_MENU=y

#
# Bus options (PCI etc.)
#
CONFIG_PCI=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_DOMAINS=y
# CONFIG_PCIEPORTBUS is not set
CONFIG_ARCH_SUPPORTS_MSI=y
CONFIG_PCI_MSI=y
# CONFIG_PCI_LEGACY is not set
CONFIG_PCI_DEBUG=y
CONFIG_HT_IRQ=y
CONFIG_ISA_DMA_API=y
CONFIG_K8_NB=y
CONFIG_PCCARD=y
# CONFIG_PCMCIA_DEBUG is not set
CONFIG_PCMCIA=y
# CONFIG_PCMCIA_LOAD_CIS is not set
# CONFIG_PCMCIA_IOCTL is not set
CONFIG_CARDBUS=y

#
# PC-card bridges
#
CONFIG_YENTA=y
# CONFIG_YENTA_O2 is not set
CONFIG_YENTA_RICOH=y
# CONFIG_YENTA_TI is not set
# CONFIG_YENTA_TOSHIBA is not set
CONFIG_PD6729=y
CONFIG_I82092=y
CONFIG_PCCARD_NONSTATIC=y
# CONFIG_HOTPLUG_PCI is not set

#
# Executable file formats / Emulations
#
# CONFIG_BINFMT_ELF is not set
# CONFIG_HAVE_AOUT is not set
# CONFIG_BINFMT_MISC is not set
# CONFIG_IA32_EMULATION is not set
# CONFIG_COMPAT_FOR_U64_ALIGNMENT is not set
CONFIG_NET=y

#
# Networking options
#
CONFIG_NET_NS=y
# CONFIG_PACKET is not set
CONFIG_UNIX=y
# CONFIG_NET_KEY is not set
# CONFIG_INET is not set
# CONFIG_NETWORK_SECMARK is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
# CONFIG_NETFILTER_ADVANCED is not set
CONFIG_ATM=y
CONFIG_ATM_LANE=m
CONFIG_STP=m
CONFIG_BRIDGE=m
CONFIG_NET_DSA=y
CONFIG_NET_DSA_TAG_DSA=y
CONFIG_NET_DSA_TAG_EDSA=y
# CONFIG_NET_DSA_TAG_TRAILER is not set
CONFIG_NET_DSA_MV88E6XXX=y
# CONFIG_NET_DSA_MV88E6060 is not set
CONFIG_NET_DSA_MV88E6XXX_NEED_PPU=y
CONFIG_NET_DSA_MV88E6131=y
CONFIG_NET_DSA_MV88E6123_61_65=y
# CONFIG_VLAN_8021Q is not set
CONFIG_DECNET=y
CONFIG_DECNET_ROUTER=y
CONFIG_LLC=y
# CONFIG_LLC2 is not set
CONFIG_IPX=m
# CONFIG_IPX_INTERN is not set
CONFIG_ATALK=y
CONFIG_DEV_APPLETALK=m
CONFIG_IPDDP=m
CONFIG_IPDDP_ENCAP=y
# CONFIG_IPDDP_DECAP is not set
CONFIG_X25=m
CONFIG_LAPB=m
CONFIG_WAN_ROUTER=y
CONFIG_NET_SCHED=y

#
# Queueing/Scheduling
#
CONFIG_NET_SCH_CBQ=m
CONFIG_NET_SCH_HTB=m
CONFIG_NET_SCH_HFSC=y
# CONFIG_NET_SCH_ATM is not set
# CONFIG_NET_SCH_PRIO is not set
# CONFIG_NET_SCH_MULTIQ is not set
# CONFIG_NET_SCH_RED is not set
# CONFIG_NET_SCH_SFQ is not set
CONFIG_NET_SCH_TEQL=m
# CONFIG_NET_SCH_TBF is not set
# CONFIG_NET_SCH_GRED is not set
CONFIG_NET_SCH_DSMARK=y
CONFIG_NET_SCH_NETEM=y
# CONFIG_NET_SCH_INGRESS is not set

#
# Classification
#
CONFIG_NET_CLS=y
CONFIG_NET_CLS_BASIC=m
CONFIG_NET_CLS_TCINDEX=m
CONFIG_NET_CLS_ROUTE4=y
CONFIG_NET_CLS_ROUTE=y
CONFIG_NET_CLS_FW=m
CONFIG_NET_CLS_U32=y
CONFIG_CLS_U32_PERF=y
CONFIG_CLS_U32_MARK=y
CONFIG_NET_CLS_RSVP=y
# CONFIG_NET_CLS_RSVP6 is not set
CONFIG_NET_CLS_FLOW=y
CONFIG_NET_EMATCH=y
CONFIG_NET_EMATCH_STACK=32
CONFIG_NET_EMATCH_CMP=m
# CONFIG_NET_EMATCH_NBYTE is not set
CONFIG_NET_EMATCH_U32=y
# CONFIG_NET_EMATCH_META is not set
# CONFIG_NET_EMATCH_TEXT is not set
CONFIG_NET_CLS_ACT=y
CONFIG_NET_ACT_POLICE=y
CONFIG_NET_ACT_GACT=m
CONFIG_GACT_PROB=y
CONFIG_NET_ACT_MIRRED=y
CONFIG_NET_ACT_NAT=m
# CONFIG_NET_ACT_PEDIT is not set
CONFIG_NET_ACT_SIMP=m
CONFIG_NET_ACT_SKBEDIT=y
# CONFIG_NET_CLS_IND is not set
CONFIG_NET_SCH_FIFO=y

#
# Network testing
#
CONFIG_NET_PKTGEN=y
# CONFIG_HAMRADIO is not set
# CONFIG_CAN is not set
CONFIG_IRDA=m

#
# IrDA protocols
#
CONFIG_IRLAN=m
CONFIG_IRCOMM=m
CONFIG_IRDA_ULTRA=y

#
# IrDA options
#
CONFIG_IRDA_CACHE_LAST_LSAP=y
CONFIG_IRDA_FAST_RR=y
CONFIG_IRDA_DEBUG=y

#
# Infrared-port device drivers
#

#
# SIR device drivers
#
CONFIG_IRTTY_SIR=m

#
# Dongle support
#
CONFIG_DONGLE=y
# CONFIG_ESI_DONGLE is not set
# CONFIG_ACTISYS_DONGLE is not set
# CONFIG_TEKRAM_DONGLE is not set
CONFIG_TOIM3232_DONGLE=m
# CONFIG_LITELINK_DONGLE is not set
CONFIG_MA600_DONGLE=m
CONFIG_GIRBIL_DONGLE=m
# CONFIG_MCP2120_DONGLE is not set
CONFIG_OLD_BELKIN_DONGLE=m
CONFIG_ACT200L_DONGLE=m
CONFIG_KINGSUN_DONGLE=m
# CONFIG_KSDAZZLE_DONGLE is not set
CONFIG_KS959_DONGLE=m

#
# FIR device drivers
#
CONFIG_USB_IRDA=m
# CONFIG_SIGMATEL_FIR is not set
# CONFIG_NSC_FIR is not set
CONFIG_WINBOND_FIR=m
# CONFIG_SMC_IRCC_FIR is not set
CONFIG_ALI_FIR=m
CONFIG_VLSI_FIR=m
CONFIG_VIA_FIR=m
CONFIG_MCS_FIR=m
CONFIG_BT=m
CONFIG_BT_L2CAP=m
CONFIG_BT_SCO=m
# CONFIG_BT_RFCOMM is not set
CONFIG_BT_BNEP=m
# CONFIG_BT_BNEP_MC_FILTER is not set
CONFIG_BT_BNEP_PROTO_FILTER=y
CONFIG_BT_HIDP=m

#
# Bluetooth device drivers
#
CONFIG_BT_HCIBTUSB=m
CONFIG_BT_HCIBTSDIO=m
# CONFIG_BT_HCIUART is not set
CONFIG_BT_HCIBCM203X=m
# CONFIG_BT_HCIBPA10X is not set
# CONFIG_BT_HCIBFUSB is not set
CONFIG_BT_HCIDTL1=m
CONFIG_BT_HCIBT3C=m
CONFIG_BT_HCIBLUECARD=m
# CONFIG_BT_HCIBTUART is not set
CONFIG_BT_HCIVHCI=m
CONFIG_PHONET=m
CONFIG_FIB_RULES=y
# CONFIG_WIRELESS is not set
CONFIG_RFKILL=m
# CONFIG_RFKILL_INPUT is not set
CONFIG_RFKILL_LEDS=y

#
# Device Drivers
#

#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
CONFIG_FIRMWARE_IN_KERNEL=y
CONFIG_EXTRA_FIRMWARE=""
CONFIG_DEBUG_DRIVER=y
CONFIG_DEBUG_DEVRES=y
# CONFIG_SYS_HYPERVISOR is not set
CONFIG_CONNECTOR=y
CONFIG_PROC_EVENTS=y
CONFIG_MTD=y
# CONFIG_MTD_DEBUG is not set
# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
CONFIG_MTD_REDBOOT_PARTS=m
CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y
CONFIG_MTD_REDBOOT_PARTS_READONLY=y
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_AR7_PARTS=m

#
# User Modules And Translation Layers
#
CONFIG_MTD_CHAR=m
CONFIG_HAVE_MTD_OTP=y
CONFIG_MTD_BLKDEVS=y
CONFIG_MTD_BLOCK=m
CONFIG_MTD_BLOCK_RO=y
CONFIG_FTL=m
CONFIG_NFTL=y
CONFIG_NFTL_RW=y
CONFIG_INFTL=y
# CONFIG_RFD_FTL is not set
CONFIG_SSFDC=y
CONFIG_MTD_OOPS=m

#
# RAM/ROM/Flash chip drivers
#
# CONFIG_MTD_CFI is not set
CONFIG_MTD_JEDECPROBE=y
CONFIG_MTD_GEN_PROBE=y
CONFIG_MTD_CFI_ADV_OPTIONS=y
CONFIG_MTD_CFI_NOSWAP=y
# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
CONFIG_MTD_CFI_GEOMETRY=y
CONFIG_MTD_MAP_BANK_WIDTH_1=y
CONFIG_MTD_MAP_BANK_WIDTH_2=y
# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set
CONFIG_MTD_MAP_BANK_WIDTH_8=y
CONFIG_MTD_MAP_BANK_WIDTH_16=y
# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
CONFIG_MTD_CFI_I1=y
# CONFIG_MTD_CFI_I2 is not set
# CONFIG_MTD_CFI_I4 is not set
# CONFIG_MTD_CFI_I8 is not set
CONFIG_MTD_OTP=y
# CONFIG_MTD_CFI_INTELEXT is not set
CONFIG_MTD_CFI_AMDSTD=y
# CONFIG_MTD_CFI_STAA is not set
CONFIG_MTD_CFI_UTIL=y
CONFIG_MTD_RAM=m
# CONFIG_MTD_ROM is not set
CONFIG_MTD_ABSENT=y

#
# Mapping drivers for chip access
#
# CONFIG_MTD_COMPLEX_MAPPINGS is not set
# CONFIG_MTD_PHYSMAP is not set
CONFIG_MTD_TS5500=y
CONFIG_MTD_AMD76XROM=y
CONFIG_MTD_ICHXROM=y
CONFIG_MTD_ESB2ROM=y
CONFIG_MTD_CK804XROM=m
CONFIG_MTD_SCB2_FLASH=y
CONFIG_MTD_NETtel=y
CONFIG_MTD_L440GX=y
# CONFIG_MTD_INTEL_VR_NOR is not set
CONFIG_MTD_PLATRAM=m

#
# Self-contained MTD device drivers
#
CONFIG_MTD_PMC551=y
# CONFIG_MTD_PMC551_BUGFIX is not set
# CONFIG_MTD_PMC551_DEBUG is not set
CONFIG_MTD_DATAFLASH=y
CONFIG_MTD_DATAFLASH_WRITE_VERIFY=y
CONFIG_MTD_DATAFLASH_OTP=y
CONFIG_MTD_M25P80=m
CONFIG_M25PXX_USE_FAST_READ=y
CONFIG_MTD_SLRAM=m
CONFIG_MTD_PHRAM=y
CONFIG_MTD_MTDRAM=m
CONFIG_MTDRAM_TOTAL_SIZE=4096
CONFIG_MTDRAM_ERASE_SIZE=128
CONFIG_MTD_BLOCK2MTD=y

#
# Disk-On-Chip Device Drivers
#
CONFIG_MTD_DOC2000=m
# CONFIG_MTD_DOC2001 is not set
CONFIG_MTD_DOC2001PLUS=m
CONFIG_MTD_DOCPROBE=m
CONFIG_MTD_DOCECC=m
CONFIG_MTD_DOCPROBE_ADVANCED=y
CONFIG_MTD_DOCPROBE_ADDRESS=0x0000
# CONFIG_MTD_DOCPROBE_HIGH is not set
CONFIG_MTD_DOCPROBE_55AA=y
CONFIG_MTD_NAND=y
CONFIG_MTD_NAND_VERIFY_WRITE=y
# CONFIG_MTD_NAND_ECC_SMC is not set
# CONFIG_MTD_NAND_MUSEUM_IDS is not set
CONFIG_MTD_NAND_IDS=y
# CONFIG_MTD_NAND_DISKONCHIP is not set
CONFIG_MTD_NAND_CAFE=m
CONFIG_MTD_NAND_NANDSIM=y
CONFIG_MTD_NAND_PLATFORM=m
CONFIG_MTD_ALAUDA=y
CONFIG_MTD_ONENAND=y
CONFIG_MTD_ONENAND_VERIFY_WRITE=y
CONFIG_MTD_ONENAND_OTP=y
CONFIG_MTD_ONENAND_2X_PROGRAM=y
CONFIG_MTD_ONENAND_SIM=m

#
# UBI - Unsorted block images
#
CONFIG_MTD_UBI=m
CONFIG_MTD_UBI_WL_THRESHOLD=4096
CONFIG_MTD_UBI_BEB_RESERVE=1
CONFIG_MTD_UBI_GLUEBI=y

#
# UBI debugging options
#
CONFIG_PARPORT=y
# CONFIG_PARPORT_PC is not set
# CONFIG_PARPORT_GSC is not set
CONFIG_PARPORT_AX88796=m
CONFIG_PARPORT_1284=y
CONFIG_PARPORT_NOT_PC=y
CONFIG_BLK_DEV=y
CONFIG_BLK_DEV_FD=y
CONFIG_BLK_CPQ_DA=y
CONFIG_BLK_CPQ_CISS_DA=y
CONFIG_CISS_SCSI_TAPE=y
# CONFIG_BLK_DEV_DAC960 is not set
CONFIG_BLK_DEV_UMEM=y
# CONFIG_BLK_DEV_COW_COMMON is not set
# CONFIG_BLK_DEV_LOOP is not set
CONFIG_BLK_DEV_NBD=y
CONFIG_BLK_DEV_SX8=m
CONFIG_BLK_DEV_UB=y
CONFIG_BLK_DEV_RAM=m
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
CONFIG_ATA_OVER_ETH=m
CONFIG_VIRTIO_BLK=y
CONFIG_BLK_DEV_HD=y
# CONFIG_MISC_DEVICES is not set
CONFIG_TIFM_CORE=m
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set

#
# SCSI device support
#
CONFIG_RAID_ATTRS=m
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
CONFIG_SCSI_TGT=y
CONFIG_SCSI_NETLINK=y
# CONFIG_SCSI_PROC_FS is not set

#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=m
# CONFIG_CHR_DEV_ST is not set
CONFIG_CHR_DEV_OSST=y
CONFIG_BLK_DEV_SR=m
CONFIG_BLK_DEV_SR_VENDOR=y
CONFIG_CHR_DEV_SG=y
# CONFIG_CHR_DEV_SCH is not set

#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
CONFIG_SCSI_MULTI_LUN=y
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_LOGGING=y
CONFIG_SCSI_SCAN_ASYNC=y
CONFIG_SCSI_WAIT_SCAN=m

#
# SCSI Transports
#
CONFIG_SCSI_SPI_ATTRS=y
CONFIG_SCSI_FC_ATTRS=y
CONFIG_SCSI_FC_TGT_ATTRS=y
CONFIG_SCSI_ISCSI_ATTRS=y
CONFIG_SCSI_SAS_ATTRS=m
CONFIG_SCSI_SRP_ATTRS=y
CONFIG_SCSI_SRP_TGT_ATTRS=y
# CONFIG_SCSI_LOWLEVEL is not set
CONFIG_SCSI_LOWLEVEL_PCMCIA=y
CONFIG_PCMCIA_FDOMAIN=m
CONFIG_PCMCIA_QLOGIC=m
CONFIG_PCMCIA_SYM53C500=m
CONFIG_SCSI_DH=y
CONFIG_SCSI_DH_RDAC=y
CONFIG_SCSI_DH_HP_SW=m
# CONFIG_SCSI_DH_EMC is not set
# CONFIG_SCSI_DH_ALUA is not set
# CONFIG_ATA is not set
# CONFIG_MD is not set
CONFIG_FUSION=y
# CONFIG_FUSION_SPI is not set
CONFIG_FUSION_FC=y
CONFIG_FUSION_SAS=m
CONFIG_FUSION_MAX_SGE=128
CONFIG_FUSION_CTL=m
# CONFIG_FUSION_LOGGING is not set

#
# IEEE 1394 (FireWire) support
#

#
# Enable only one of the two stacks, unless you know what you are doing
#
CONFIG_FIREWIRE=m
CONFIG_FIREWIRE_OHCI=m
CONFIG_FIREWIRE_OHCI_DEBUG=y
# CONFIG_FIREWIRE_SBP2 is not set
CONFIG_IEEE1394=m
CONFIG_IEEE1394_OHCI1394=m
CONFIG_IEEE1394_PCILYNX=m
CONFIG_IEEE1394_SBP2=m
CONFIG_IEEE1394_SBP2_PHYS_DMA=y
# CONFIG_IEEE1394_ETH1394_ROM_ENTRY is not set
# CONFIG_IEEE1394_RAWIO is not set
CONFIG_IEEE1394_VIDEO1394=m
CONFIG_IEEE1394_DV1394=m
CONFIG_IEEE1394_VERBOSEDEBUG=y
CONFIG_I2O=y
# CONFIG_I2O_LCT_NOTIFY_ON_CHANGES is not set
# CONFIG_I2O_EXT_ADAPTEC is not set
CONFIG_I2O_BUS=y
CONFIG_I2O_BLOCK=m
CONFIG_I2O_SCSI=y
# CONFIG_I2O_PROC is not set
CONFIG_MACINTOSH_DRIVERS=y
CONFIG_MAC_EMUMOUSEBTN=y
# CONFIG_NETDEVICES is not set
CONFIG_PHYLIB=y
CONFIG_MLX4_CORE=m
CONFIG_ISDN=y
CONFIG_ISDN_I4L=m
CONFIG_ISDN_AUDIO=y
CONFIG_ISDN_TTY_FAX=y
CONFIG_ISDN_X25=y

#
# ISDN feature submodules
#
CONFIG_ISDN_DRV_LOOP=m
# CONFIG_ISDN_DIVERSION is not set

#
# ISDN4Linux hardware drivers
#

#
# Passive cards
#
CONFIG_ISDN_DRV_HISAX=m

#
# D-channel protocol features
#
CONFIG_HISAX_EURO=y
# CONFIG_DE_AOC is not set
CONFIG_HISAX_NO_SENDCOMPLETE=y
CONFIG_HISAX_NO_LLC=y
CONFIG_HISAX_NO_KEYPAD=y
# CONFIG_HISAX_1TR6 is not set
CONFIG_HISAX_NI1=y
CONFIG_HISAX_MAX_CARDS=8

#
# HiSax supported cards
#
# CONFIG_HISAX_16_3 is not set
# CONFIG_HISAX_S0BOX is not set
CONFIG_HISAX_FRITZPCI=y
# CONFIG_HISAX_AVM_A1_PCMCIA is not set
CONFIG_HISAX_ELSA=y
# CONFIG_HISAX_DIEHLDIVA is not set
CONFIG_HISAX_SEDLBAUER=y
CONFIG_HISAX_NICCY=y
CONFIG_HISAX_GAZEL=y
CONFIG_HISAX_HFC_SX=y
# CONFIG_HISAX_DEBUG is not set

#
# HiSax PCMCIA card service modules
#
CONFIG_HISAX_SEDLBAUER_CS=m
# CONFIG_HISAX_ELSA_CS is not set
CONFIG_HISAX_AVM_A1_CS=m

#
# HiSax sub driver modules
#
CONFIG_HISAX_ST5481=m
# CONFIG_HISAX_HFCUSB is not set
# CONFIG_HISAX_HFC4S8S is not set
CONFIG_HISAX_HDLC=y

#
# Active cards
#
# CONFIG_HYSDN is not set
# CONFIG_ISDN_DRV_GIGASET is not set
# CONFIG_ISDN_CAPI is not set
# CONFIG_PHONE is not set

#
# Input device support
#
CONFIG_INPUT=y
CONFIG_INPUT_FF_MEMLESS=y
CONFIG_INPUT_POLLDEV=m

#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=m
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
CONFIG_INPUT_JOYDEV=y
CONFIG_INPUT_EVDEV=m
CONFIG_INPUT_EVBUG=y

#
# Input Device Drivers
#
# CONFIG_INPUT_KEYBOARD is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=m
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
CONFIG_MOUSE_PS2_LIFEBOOK=y
# CONFIG_MOUSE_PS2_TRACKPOINT is not set
CONFIG_MOUSE_PS2_TOUCHKIT=y
# CONFIG_MOUSE_SERIAL is not set
CONFIG_MOUSE_APPLETOUCH=m
CONFIG_MOUSE_BCM5974=y
CONFIG_MOUSE_VSXXXAA=m
CONFIG_MOUSE_GPIO=m
CONFIG_INPUT_JOYSTICK=y
CONFIG_JOYSTICK_ANALOG=m
# CONFIG_JOYSTICK_A3D is not set
# CONFIG_JOYSTICK_ADI is not set
CONFIG_JOYSTICK_COBRA=m
CONFIG_JOYSTICK_GF2K=y
# CONFIG_JOYSTICK_GRIP is not set
CONFIG_JOYSTICK_GRIP_MP=y
CONFIG_JOYSTICK_GUILLEMOT=m
CONFIG_JOYSTICK_INTERACT=m
# CONFIG_JOYSTICK_SIDEWINDER is not set
CONFIG_JOYSTICK_TMDC=y
CONFIG_JOYSTICK_IFORCE=y
CONFIG_JOYSTICK_IFORCE_USB=y
# CONFIG_JOYSTICK_IFORCE_232 is not set
CONFIG_JOYSTICK_WARRIOR=y
CONFIG_JOYSTICK_MAGELLAN=m
CONFIG_JOYSTICK_SPACEORB=m
# CONFIG_JOYSTICK_SPACEBALL is not set
CONFIG_JOYSTICK_STINGER=y
# CONFIG_JOYSTICK_TWIDJOY is not set
CONFIG_JOYSTICK_ZHENHUA=y
CONFIG_JOYSTICK_DB9=y
CONFIG_JOYSTICK_GAMECON=y
# CONFIG_JOYSTICK_TURBOGRAFX is not set
CONFIG_JOYSTICK_JOYDUMP=m
# CONFIG_JOYSTICK_XPAD is not set
# CONFIG_INPUT_TABLET is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set

#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=y
# CONFIG_SERIO_CT82C710 is not set
CONFIG_SERIO_PARKBD=m
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
CONFIG_GAMEPORT=y
# CONFIG_GAMEPORT_NS558 is not set
CONFIG_GAMEPORT_L4=y
CONFIG_GAMEPORT_EMU10K1=y
CONFIG_GAMEPORT_FM801=m

#
# Character devices
#
# CONFIG_VT is not set
# CONFIG_DEVKMEM is not set
CONFIG_SERIAL_NONSTANDARD=y
# CONFIG_COMPUTONE is not set
# CONFIG_ROCKETPORT is not set
CONFIG_CYCLADES=m
CONFIG_CYZ_INTR=y
CONFIG_DIGIEPCA=y
CONFIG_MOXA_INTELLIO=y
CONFIG_MOXA_SMARTIO=y
# CONFIG_ISI is not set
CONFIG_SYNCLINK=y
CONFIG_SYNCLINKMP=y
CONFIG_SYNCLINK_GT=m
# CONFIG_N_HDLC is not set
CONFIG_RISCOM8=y
CONFIG_SPECIALIX=m
CONFIG_SX=y
# CONFIG_RIO is not set
CONFIG_STALDRV=y
CONFIG_STALLION=m
CONFIG_ISTALLION=y
# CONFIG_NOZOMI is not set

#
# Serial drivers
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_FIX_EARLYCON_MEM=y
CONFIG_SERIAL_8250_PCI=m
CONFIG_SERIAL_8250_CS=y
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
# CONFIG_SERIAL_8250_DETECT_IRQ is not set
CONFIG_SERIAL_8250_RSA=y

#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_CONSOLE_POLL=y
CONFIG_SERIAL_JSM=m
CONFIG_UNIX98_PTYS=y
# CONFIG_LEGACY_PTYS is not set
CONFIG_PRINTER=m
CONFIG_LP_CONSOLE=y
# CONFIG_PPDEV is not set
CONFIG_HVC_DRIVER=y
CONFIG_VIRTIO_CONSOLE=m
CONFIG_IPMI_HANDLER=y
# CONFIG_IPMI_PANIC_EVENT is not set
# CONFIG_IPMI_DEVICE_INTERFACE is not set
CONFIG_IPMI_SI=y
CONFIG_IPMI_WATCHDOG=y
CONFIG_IPMI_POWEROFF=y
# CONFIG_HW_RANDOM is not set
CONFIG_NVRAM=m
# CONFIG_RTC is not set
# CONFIG_GEN_RTC is not set
CONFIG_R3964=y
# CONFIG_APPLICOM is not set

#
# PCMCIA character devices
#
CONFIG_SYNCLINK_CS=y
CONFIG_CARDMAN_4000=m
CONFIG_CARDMAN_4040=y
CONFIG_MWAVE=y
# CONFIG_PC8736x_GPIO is not set
CONFIG_RAW_DRIVER=y
CONFIG_MAX_RAW_DEVS=256
CONFIG_HANGCHECK_TIMER=y
CONFIG_TCG_TPM=y
CONFIG_TCG_NSC=y
# CONFIG_TCG_ATMEL is not set
CONFIG_TELCLOCK=y
CONFIG_DEVPORT=y
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=m
CONFIG_I2C_HELPER_AUTO=y
CONFIG_I2C_ALGOBIT=y

#
# I2C Hardware Bus support
#

#
# PC SMBus host controller drivers
#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
CONFIG_I2C_ALI15X3=m
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not set
# CONFIG_I2C_I801 is not set
CONFIG_I2C_ISCH=m
CONFIG_I2C_PIIX4=m
CONFIG_I2C_NFORCE2=y
CONFIG_I2C_SIS5595=m
CONFIG_I2C_SIS630=y
# CONFIG_I2C_SIS96X is not set
# CONFIG_I2C_VIA is not set
CONFIG_I2C_VIAPRO=m

#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
CONFIG_I2C_GPIO=y
CONFIG_I2C_OCORES=y
CONFIG_I2C_SIMTEC=m

#
# External I2C/SMBus adapter drivers
#
CONFIG_I2C_PARPORT=m
CONFIG_I2C_PARPORT_LIGHT=y
CONFIG_I2C_TAOS_EVM=y
# CONFIG_I2C_TINY_USB is not set

#
# Graphics adapter I2C/DDC channel drivers
#
CONFIG_I2C_VOODOO3=y

#
# Other I2C/SMBus bus drivers
#
# CONFIG_I2C_PCA_PLATFORM is not set
CONFIG_I2C_STUB=m

#
# Miscellaneous I2C Chip support
#
CONFIG_DS1682=y
# CONFIG_SENSORS_EEPROM is not set
CONFIG_SENSORS_PCF8574=y
CONFIG_PCF8575=y
# CONFIG_SENSORS_PCF8591 is not set
CONFIG_TPS65010=y
CONFIG_SENSORS_MAX6875=y
CONFIG_SENSORS_TSL2550=y
# CONFIG_I2C_DEBUG_CORE is not set
CONFIG_I2C_DEBUG_ALGO=y
CONFIG_I2C_DEBUG_BUS=y
# CONFIG_I2C_DEBUG_CHIP is not set
CONFIG_SPI=y
CONFIG_SPI_DEBUG=y
CONFIG_SPI_MASTER=y

#
# SPI Master Controller Drivers
#
CONFIG_SPI_BITBANG=y
CONFIG_SPI_BUTTERFLY=y
# CONFIG_SPI_LM70_LLP is not set

#
# SPI Protocol Masters
#
# CONFIG_SPI_SPIDEV is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
CONFIG_GPIOLIB=y
# CONFIG_DEBUG_GPIO is not set

#
# I2C GPIO expanders:
#
CONFIG_GPIO_MAX732X=y
CONFIG_GPIO_PCA953X=m
# CONFIG_GPIO_PCF857X is not set

#
# PCI GPIO expanders:
#
CONFIG_GPIO_BT8XX=y

#
# SPI GPIO expanders:
#
CONFIG_GPIO_MAX7301=m
CONFIG_GPIO_MCP23S08=y
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=m
CONFIG_HWMON_VID=m
# CONFIG_SENSORS_ABITUGURU is not set
CONFIG_SENSORS_ABITUGURU3=m
CONFIG_SENSORS_AD7414=m
# CONFIG_SENSORS_AD7418 is not set
CONFIG_SENSORS_ADCXX=m
CONFIG_SENSORS_ADM1021=m
CONFIG_SENSORS_ADM1025=m
# CONFIG_SENSORS_ADM1026 is not set
CONFIG_SENSORS_ADM1029=m
# CONFIG_SENSORS_ADM1031 is not set
CONFIG_SENSORS_ADM9240=m
CONFIG_SENSORS_ADT7470=m
CONFIG_SENSORS_ADT7473=m
CONFIG_SENSORS_K8TEMP=m
CONFIG_SENSORS_ASB100=m
# CONFIG_SENSORS_ATXP1 is not set
CONFIG_SENSORS_DS1621=m
CONFIG_SENSORS_I5K_AMB=m
# CONFIG_SENSORS_F71805F is not set
CONFIG_SENSORS_F71882FG=m
# CONFIG_SENSORS_F75375S is not set
# CONFIG_SENSORS_FSCHER is not set
CONFIG_SENSORS_FSCPOS=m
# CONFIG_SENSORS_FSCHMD is not set
CONFIG_SENSORS_GL518SM=m
CONFIG_SENSORS_GL520SM=m
CONFIG_SENSORS_CORETEMP=m
# CONFIG_SENSORS_IBMAEM is not set
CONFIG_SENSORS_IBMPEX=m
CONFIG_SENSORS_IT87=m
# CONFIG_SENSORS_LM63 is not set
CONFIG_SENSORS_LM70=m
CONFIG_SENSORS_LM75=m
# CONFIG_SENSORS_LM77 is not set
CONFIG_SENSORS_LM78=m
CONFIG_SENSORS_LM80=m
# CONFIG_SENSORS_LM83 is not set
CONFIG_SENSORS_LM85=m
CONFIG_SENSORS_LM87=m
CONFIG_SENSORS_LM90=m
CONFIG_SENSORS_LM92=m
CONFIG_SENSORS_LM93=m
# CONFIG_SENSORS_MAX1111 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_PC87360 is not set
CONFIG_SENSORS_PC87427=m
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_DME1737 is not set
CONFIG_SENSORS_SMSC47M1=m
CONFIG_SENSORS_SMSC47M192=m
CONFIG_SENSORS_SMSC47B397=m
CONFIG_SENSORS_ADS7828=m
CONFIG_SENSORS_THMC50=m
CONFIG_SENSORS_VIA686A=m
# CONFIG_SENSORS_VT1211 is not set
CONFIG_SENSORS_VT8231=m
# CONFIG_SENSORS_W83781D is not set
CONFIG_SENSORS_W83791D=m
CONFIG_SENSORS_W83792D=m
CONFIG_SENSORS_W83793=m
CONFIG_SENSORS_W83L785TS=m
CONFIG_SENSORS_W83L786NG=m
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
CONFIG_SENSORS_HDAPS=m
CONFIG_SENSORS_APPLESMC=m
CONFIG_HWMON_DEBUG_CHIP=y
# CONFIG_THERMAL is not set
CONFIG_WATCHDOG=y
CONFIG_WATCHDOG_NOWAYOUT=y

#
# Watchdog Device Drivers
#
CONFIG_SOFT_WATCHDOG=m
CONFIG_ACQUIRE_WDT=y
CONFIG_ADVANTECH_WDT=y
CONFIG_ALIM1535_WDT=y
CONFIG_ALIM7101_WDT=m
CONFIG_SC520_WDT=y
# CONFIG_EUROTECH_WDT is not set
# CONFIG_IB700_WDT is not set
CONFIG_IBMASR=y
CONFIG_WAFER_WDT=y
CONFIG_I6300ESB_WDT=y
CONFIG_ITCO_WDT=y
CONFIG_ITCO_VENDOR_SUPPORT=y
CONFIG_IT8712F_WDT=m
CONFIG_IT87_WDT=y
CONFIG_HP_WATCHDOG=m
CONFIG_SC1200_WDT=y
CONFIG_PC87413_WDT=y
CONFIG_60XX_WDT=y
CONFIG_SBC8360_WDT=y
# CONFIG_CPU5_WDT is not set
CONFIG_SMSC37B787_WDT=y
CONFIG_W83627HF_WDT=y
CONFIG_W83697HF_WDT=y
CONFIG_W83697UG_WDT=m
# CONFIG_W83877F_WDT is not set
# CONFIG_W83977F_WDT is not set
CONFIG_MACHZ_WDT=y
CONFIG_SBC_EPX_C3_WATCHDOG=y

#
# PCI-based Watchdog Cards
#
# CONFIG_PCIPCWATCHDOG is not set
CONFIG_WDTPCI=m
CONFIG_WDT_501_PCI=y

#
# USB-based Watchdog Cards
#
# CONFIG_USBPCWATCHDOG is not set

#
# Sonics Silicon Backplane
#
CONFIG_SSB_POSSIBLE=y
CONFIG_SSB=m
CONFIG_SSB_SPROM=y
CONFIG_SSB_PCIHOST_POSSIBLE=y
CONFIG_SSB_PCIHOST=y
# CONFIG_SSB_B43_PCI_BRIDGE is not set
CONFIG_SSB_PCMCIAHOST_POSSIBLE=y
CONFIG_SSB_PCMCIAHOST=y
# CONFIG_SSB_SILENT is not set
CONFIG_SSB_DEBUG=y
CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y
# CONFIG_SSB_DRIVER_PCICORE is not set

#
# Multifunction device drivers
#
# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
CONFIG_HTC_PASIC3=y
# CONFIG_MFD_TMIO is not set

#
# Multimedia devices
#

#
# Multimedia core support
#
# CONFIG_VIDEO_DEV is not set
# CONFIG_VIDEO_MEDIA is not set

#
# Multimedia drivers
#
CONFIG_DAB=y
CONFIG_USB_DABUSB=m

#
# Graphics support
#
CONFIG_AGP=y
CONFIG_AGP_AMD64=y
CONFIG_AGP_INTEL=m
# CONFIG_AGP_SIS is not set
# CONFIG_AGP_VIA is not set
# CONFIG_DRM is not set
# CONFIG_VGASTATE is not set
# CONFIG_VIDEO_OUTPUT_CONTROL is not set
# CONFIG_FB is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set

#
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set
# CONFIG_SOUND is not set
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
CONFIG_HID_DEBUG=y
CONFIG_HIDRAW=y

#
# USB Input Devices
#
CONFIG_USB_HID=y
# CONFIG_HID_PID is not set
CONFIG_USB_HIDDEV=y

#
# Special HID drivers
#
# CONFIG_HID_COMPAT is not set
CONFIG_HID_A4TECH=m
CONFIG_HID_APPLE=y
# CONFIG_HID_BELKIN is not set
CONFIG_HID_BRIGHT=y
CONFIG_HID_CHERRY=m
CONFIG_HID_CHICONY=y
CONFIG_HID_CYPRESS=m
CONFIG_HID_DELL=m
CONFIG_HID_EZKEY=m
# CONFIG_HID_GYRATION is not set
# CONFIG_HID_LOGITECH is not set
CONFIG_HID_MICROSOFT=m
CONFIG_HID_MONTEREY=m
CONFIG_HID_PANTHERLORD=y
CONFIG_PANTHERLORD_FF=y
CONFIG_HID_PETALYNX=y
CONFIG_HID_SAMSUNG=y
CONFIG_HID_SONY=m
CONFIG_HID_SUNPLUS=y
# CONFIG_THRUSTMASTER_FF is not set
CONFIG_ZEROPLUS_FF=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=y
CONFIG_USB_DEBUG=y
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y

#
# Miscellaneous USB options
#
# CONFIG_USB_DEVICEFS is not set
# CONFIG_USB_DEVICE_CLASS is not set
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_OTG is not set
CONFIG_USB_OTG_WHITELIST=y
# CONFIG_USB_OTG_BLACKLIST_HUB is not set
# CONFIG_USB_MON is not set

#
# USB Host Controller Drivers
#
CONFIG_USB_C67X00_HCD=m
CONFIG_USB_EHCI_HCD=m
CONFIG_USB_EHCI_ROOT_HUB_TT=y
CONFIG_USB_EHCI_TT_NEWSCHED=y
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
# CONFIG_USB_OHCI_HCD is not set
# CONFIG_USB_UHCI_HCD is not set
# CONFIG_USB_U132_HCD is not set
CONFIG_USB_SL811_HCD=m
# CONFIG_USB_SL811_CS is not set
CONFIG_USB_R8A66597_HCD=y

#
# USB Device Class drivers
#
CONFIG_USB_ACM=m
# CONFIG_USB_PRINTER is not set
# CONFIG_USB_WDM is not set
CONFIG_USB_TMC=y

#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#

#
# may also be needed; see USB_STORAGE Help for more information
#
# CONFIG_USB_STORAGE is not set
CONFIG_USB_LIBUSUAL=y

#
# USB Imaging devices
#
CONFIG_USB_MDC800=y
CONFIG_USB_MICROTEK=y

#
# USB port drivers
#
# CONFIG_USB_USS720 is not set
CONFIG_USB_SERIAL=m
CONFIG_USB_EZUSB=y
# CONFIG_USB_SERIAL_GENERIC is not set
# CONFIG_USB_SERIAL_AIRCABLE is not set
CONFIG_USB_SERIAL_ARK3116=m
CONFIG_USB_SERIAL_BELKIN=m
CONFIG_USB_SERIAL_CH341=m
CONFIG_USB_SERIAL_WHITEHEAT=m
CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
# CONFIG_USB_SERIAL_CP2101 is not set
# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
CONFIG_USB_SERIAL_EMPEG=m
CONFIG_USB_SERIAL_FTDI_SIO=m
CONFIG_USB_SERIAL_FUNSOFT=m
CONFIG_USB_SERIAL_VISOR=m
CONFIG_USB_SERIAL_IPAQ=m
# CONFIG_USB_SERIAL_IR is not set
CONFIG_USB_SERIAL_EDGEPORT=m
CONFIG_USB_SERIAL_EDGEPORT_TI=m
CONFIG_USB_SERIAL_GARMIN=m
CONFIG_USB_SERIAL_IPW=m
# CONFIG_USB_SERIAL_IUU is not set
# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
# CONFIG_USB_SERIAL_KEYSPAN is not set
CONFIG_USB_SERIAL_KLSI=m
CONFIG_USB_SERIAL_KOBIL_SCT=m
CONFIG_USB_SERIAL_MCT_U232=m
CONFIG_USB_SERIAL_MOS7720=m
CONFIG_USB_SERIAL_MOS7840=m
CONFIG_USB_SERIAL_MOTOROLA=m
# CONFIG_USB_SERIAL_NAVMAN is not set
# CONFIG_USB_SERIAL_PL2303 is not set
CONFIG_USB_SERIAL_OTI6858=m
CONFIG_USB_SERIAL_SPCP8X5=m
# CONFIG_USB_SERIAL_HP4X is not set
CONFIG_USB_SERIAL_SAFE=m
# CONFIG_USB_SERIAL_SAFE_PADDED is not set
CONFIG_USB_SERIAL_SIERRAWIRELESS=m
# CONFIG_USB_SERIAL_TI is not set
CONFIG_USB_SERIAL_CYBERJACK=m
CONFIG_USB_SERIAL_XIRCOM=m
CONFIG_USB_SERIAL_OPTION=m
# CONFIG_USB_SERIAL_OMNINET is not set
# CONFIG_USB_SERIAL_DEBUG is not set

#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
CONFIG_USB_EMI26=m
CONFIG_USB_ADUTUX=m
# CONFIG_USB_SEVSEG is not set
CONFIG_USB_RIO500=m
CONFIG_USB_LEGOTOWER=m
# CONFIG_USB_LCD is not set
# CONFIG_USB_BERRY_CHARGE is not set
CONFIG_USB_LED=m
CONFIG_USB_CYPRESS_CY7C63=y
CONFIG_USB_CYTHERM=m
# CONFIG_USB_PHIDGET is not set
CONFIG_USB_IDMOUSE=y
CONFIG_USB_FTDI_ELAN=y
# CONFIG_USB_APPLEDISPLAY is not set
# CONFIG_USB_SISUSBVGA is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
CONFIG_USB_IOWARRIOR=y
CONFIG_USB_ISIGHTFW=y
CONFIG_USB_VST=m
CONFIG_USB_ATM=y
CONFIG_USB_SPEEDTOUCH=y
CONFIG_USB_CXACRU=m
CONFIG_USB_UEAGLEATM=m
CONFIG_USB_XUSBATM=y
CONFIG_MMC=m
# CONFIG_MMC_DEBUG is not set
# CONFIG_MMC_UNSAFE_RESUME is not set

#
# MMC/SD/SDIO Card Drivers
#
CONFIG_MMC_BLOCK=m
CONFIG_MMC_BLOCK_BOUNCE=y
CONFIG_SDIO_UART=m
# CONFIG_MMC_TEST is not set

#
# MMC/SD/SDIO Host Controller Drivers
#
CONFIG_MMC_SDHCI=m
CONFIG_MMC_SDHCI_PCI=m
# CONFIG_MMC_RICOH_MMC is not set
CONFIG_MMC_WBSD=m
CONFIG_MMC_TIFM_SD=m
CONFIG_MMC_SPI=m
# CONFIG_MMC_SDRICOH_CS is not set
# CONFIG_MEMSTICK is not set
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=m

#
# LED drivers
#
CONFIG_LEDS_PCA9532=m
CONFIG_LEDS_GPIO=m
CONFIG_LEDS_CLEVO_MAIL=m
CONFIG_LEDS_PCA955X=m

#
# LED Triggers
#
CONFIG_LEDS_TRIGGERS=y
# CONFIG_LEDS_TRIGGER_TIMER is not set
CONFIG_LEDS_TRIGGER_HEARTBEAT=m
# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
CONFIG_ACCESSIBILITY=y
CONFIG_INFINIBAND=m
# CONFIG_INFINIBAND_USER_MAD is not set
CONFIG_INFINIBAND_USER_ACCESS=m
CONFIG_INFINIBAND_USER_MEM=y
CONFIG_INFINIBAND_MTHCA=m
CONFIG_INFINIBAND_MTHCA_DEBUG=y
CONFIG_INFINIBAND_IPATH=m
CONFIG_MLX4_INFINIBAND=m
CONFIG_INFINIBAND_SRP=m
CONFIG_EDAC=y

#
# Reporting subsystems
#
CONFIG_EDAC_DEBUG=y
# CONFIG_EDAC_MM_EDAC is not set
# CONFIG_RTC_CLASS is not set
CONFIG_DMADEVICES=y

#
# DMA Devices
#
CONFIG_INTEL_IOATDMA=y
CONFIG_DMA_ENGINE=y

#
# DMA Clients
#
CONFIG_NET_DMA=y
# CONFIG_DMATEST is not set
CONFIG_DCA=y
CONFIG_AUXDISPLAY=y
# CONFIG_UIO is not set

#
# Firmware Drivers
#
# CONFIG_EDD is not set
CONFIG_FIRMWARE_MEMMAP=y
# CONFIG_DELL_RBU is not set
CONFIG_DCDBAS=m
# CONFIG_DMIID is not set
CONFIG_ISCSI_IBFT_FIND=y
CONFIG_ISCSI_IBFT=y

#
# File systems
#
# CONFIG_EXT2_FS is not set
# CONFIG_EXT3_FS is not set
CONFIG_EXT4_FS=y
# CONFIG_EXT4DEV_COMPAT is not set
CONFIG_EXT4_FS_XATTR=y
CONFIG_EXT4_FS_POSIX_ACL=y
CONFIG_EXT4_FS_SECURITY=y
CONFIG_JBD2=y
CONFIG_JBD2_DEBUG=y
CONFIG_FS_MBCACHE=y
CONFIG_REISERFS_FS=y
CONFIG_REISERFS_CHECK=y
CONFIG_REISERFS_PROC_INFO=y
CONFIG_REISERFS_FS_XATTR=y
CONFIG_REISERFS_FS_POSIX_ACL=y
# CONFIG_REISERFS_FS_SECURITY is not set
CONFIG_JFS_FS=y
CONFIG_JFS_POSIX_ACL=y
CONFIG_JFS_SECURITY=y
# CONFIG_JFS_DEBUG is not set
CONFIG_JFS_STATISTICS=y
CONFIG_FS_POSIX_ACL=y
CONFIG_FILE_LOCKING=y
CONFIG_XFS_FS=y
CONFIG_XFS_QUOTA=y
# CONFIG_XFS_POSIX_ACL is not set
CONFIG_XFS_RT=y
CONFIG_XFS_DEBUG=y
CONFIG_GFS2_FS=m
CONFIG_DNOTIFY=y
# CONFIG_INOTIFY is not set
CONFIG_QUOTA=y
CONFIG_QUOTA_NETLINK_INTERFACE=y
# CONFIG_PRINT_QUOTA_WARNING is not set
CONFIG_QFMT_V1=y
CONFIG_QFMT_V2=y
CONFIG_QUOTACTL=y
CONFIG_AUTOFS_FS=y
CONFIG_AUTOFS4_FS=m
# CONFIG_FUSE_FS is not set

#
# CD-ROM/DVD Filesystems
#
# CONFIG_ISO9660_FS is not set
CONFIG_UDF_FS=m
CONFIG_UDF_NLS=y

#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
# CONFIG_NTFS_FS is not set

#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_VMCORE=y
# CONFIG_PROC_SYSCTL is not set
CONFIG_PROC_PAGE_MONITOR=y
# CONFIG_SYSFS is not set
# CONFIG_TMPFS is not set
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y

#
# Miscellaneous filesystems
#
CONFIG_ADFS_FS=m
CONFIG_ADFS_FS_RW=y
CONFIG_AFFS_FS=m
CONFIG_HFS_FS=y
# CONFIG_HFSPLUS_FS is not set
CONFIG_BEFS_FS=m
CONFIG_BEFS_DEBUG=y
CONFIG_BFS_FS=y
CONFIG_EFS_FS=y
CONFIG_JFFS2_FS=y
CONFIG_JFFS2_FS_DEBUG=0
# CONFIG_JFFS2_FS_WRITEBUFFER is not set
# CONFIG_JFFS2_SUMMARY is not set
# CONFIG_JFFS2_FS_XATTR is not set
CONFIG_JFFS2_COMPRESSION_OPTIONS=y
CONFIG_JFFS2_ZLIB=y
# CONFIG_JFFS2_LZO is not set
CONFIG_JFFS2_RTIME=y
# CONFIG_JFFS2_RUBIN is not set
# CONFIG_JFFS2_CMODE_NONE is not set
CONFIG_JFFS2_CMODE_PRIORITY=y
# CONFIG_JFFS2_CMODE_SIZE is not set
# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
CONFIG_UBIFS_FS=m
# CONFIG_UBIFS_FS_XATTR is not set
# CONFIG_UBIFS_FS_ADVANCED_COMPR is not set
CONFIG_UBIFS_FS_LZO=y
CONFIG_UBIFS_FS_ZLIB=y
CONFIG_UBIFS_FS_DEBUG=y
CONFIG_UBIFS_FS_DEBUG_MSG_LVL=0
CONFIG_UBIFS_FS_DEBUG_CHKS=y
CONFIG_CRAMFS=y
CONFIG_VXFS_FS=m
CONFIG_MINIX_FS=m
CONFIG_OMFS_FS=m
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
CONFIG_ROMFS_FS=m
# CONFIG_SYSV_FS is not set
CONFIG_UFS_FS=m
CONFIG_UFS_FS_WRITE=y
CONFIG_UFS_DEBUG=y
CONFIG_NETWORK_FILESYSTEMS=y
# CONFIG_NCP_FS is not set

#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
# CONFIG_NLS_CODEPAGE_437 is not set
CONFIG_NLS_CODEPAGE_737=m
# CONFIG_NLS_CODEPAGE_775 is not set
CONFIG_NLS_CODEPAGE_850=m
# CONFIG_NLS_CODEPAGE_852 is not set
CONFIG_NLS_CODEPAGE_855=m
CONFIG_NLS_CODEPAGE_857=m
# CONFIG_NLS_CODEPAGE_860 is not set
CONFIG_NLS_CODEPAGE_861=y
# CONFIG_NLS_CODEPAGE_862 is not set
CONFIG_NLS_CODEPAGE_863=m
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
CONFIG_NLS_CODEPAGE_866=m
CONFIG_NLS_CODEPAGE_869=y
# CONFIG_NLS_CODEPAGE_936 is not set
CONFIG_NLS_CODEPAGE_950=y
# CONFIG_NLS_CODEPAGE_932 is not set
CONFIG_NLS_CODEPAGE_949=y
CONFIG_NLS_CODEPAGE_874=y
CONFIG_NLS_ISO8859_8=y
CONFIG_NLS_CODEPAGE_1250=y
# CONFIG_NLS_CODEPAGE_1251 is not set
CONFIG_NLS_ASCII=y
# CONFIG_NLS_ISO8859_1 is not set
# CONFIG_NLS_ISO8859_2 is not set
CONFIG_NLS_ISO8859_3=y
# CONFIG_NLS_ISO8859_4 is not set
CONFIG_NLS_ISO8859_5=y
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
CONFIG_NLS_ISO8859_9=m
CONFIG_NLS_ISO8859_13=y
# CONFIG_NLS_ISO8859_14 is not set
CONFIG_NLS_ISO8859_15=y
CONFIG_NLS_KOI8_R=y
CONFIG_NLS_KOI8_U=m
CONFIG_NLS_UTF8=m

#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_PRINTK_TIME=y
CONFIG_ALLOW_WARNINGS=y
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=2048
CONFIG_MAGIC_SYSRQ=y
CONFIG_UNUSED_SYMBOLS=y
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
CONFIG_DETECT_SOFTLOCKUP=y
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC=y
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=1
CONFIG_SCHED_DEBUG=y
CONFIG_SCHEDSTATS=y
CONFIG_TIMER_STATS=y
# CONFIG_DEBUG_OBJECTS is not set
CONFIG_DEBUG_RT_MUTEXES=y
CONFIG_DEBUG_PI_LIST=y
# CONFIG_RT_MUTEX_TESTER is not set
CONFIG_DEBUG_SPINLOCK=y
CONFIG_DEBUG_MUTEXES=y
CONFIG_DEBUG_LOCK_ALLOC=y
CONFIG_PROVE_LOCKING=y
CONFIG_LOCKDEP=y
# CONFIG_LOCK_STAT is not set
CONFIG_DEBUG_LOCKDEP=y
CONFIG_TRACE_IRQFLAGS=y
CONFIG_DEBUG_SPINLOCK_SLEEP=y
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
CONFIG_STACKTRACE=y
CONFIG_DEBUG_KOBJECT=y
CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_VM=y
# CONFIG_DEBUG_VIRTUAL is not set
# CONFIG_DEBUG_WRITECOUNT is not set
# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_DEBUG_LIST is not set
CONFIG_DEBUG_SG=y
CONFIG_DEBUG_NOTIFIERS=y
CONFIG_FRAME_POINTER=y
# CONFIG_BOOT_PRINTK_DELAY is not set
CONFIG_RCU_TORTURE_TEST=y
CONFIG_RCU_TORTURE_TEST_RUNNABLE=y
CONFIG_RCU_CPU_STALL_DETECTOR=y
CONFIG_BACKTRACE_SELF_TEST=m
CONFIG_DEBUG_BLOCK_EXT_DEVT=y
# CONFIG_FAULT_INJECTION is not set
CONFIG_LATENCYTOP=y
# CONFIG_SYSCTL_SYSCALL_CHECK is not set
CONFIG_NOP_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_TRACER_MAX_TRACE=y
CONFIG_RING_BUFFER=y
CONFIG_TRACING=y
CONFIG_FUNCTION_TRACER=y
# CONFIG_IRQSOFF_TRACER is not set
CONFIG_SYSPROF_TRACER=y
CONFIG_SCHED_TRACER=y
CONFIG_CONTEXT_SWITCH_TRACER=y
# CONFIG_BOOT_TRACER is not set
CONFIG_STACK_TRACER=y
CONFIG_DYNAMIC_FTRACE=y
CONFIG_FTRACE_MCOUNT_RECORD=y
CONFIG_FTRACE_SELFTEST=y
CONFIG_FTRACE_STARTUP_TEST=y
# CONFIG_PROVIDE_OHCI1394_DMA_INIT is not set
CONFIG_FIREWIRE_OHCI_REMOTE_DMA=y
CONFIG_DYNAMIC_PRINTK_DEBUG=y
CONFIG_SAMPLES=y
# CONFIG_SAMPLE_MARKERS is not set
CONFIG_SAMPLE_TRACEPOINTS=m
CONFIG_SAMPLE_KOBJECT=y
CONFIG_HAVE_ARCH_KGDB=y
CONFIG_KGDB=y
CONFIG_KGDB_SERIAL_CONSOLE=y
# CONFIG_KGDB_TESTS is not set
# CONFIG_STRICT_DEVMEM is not set
CONFIG_X86_VERBOSE_BOOTUP=y
CONFIG_EARLY_PRINTK=y
CONFIG_EARLY_PRINTK_DBGP=y
# CONFIG_DEBUG_STACKOVERFLOW is not set
CONFIG_DEBUG_STACK_USAGE=y
CONFIG_DEBUG_PAGEALLOC=y
# CONFIG_X86_PTDUMP is not set
# CONFIG_DEBUG_RODATA is not set
CONFIG_DIRECT_GBPAGES=y
# CONFIG_DEBUG_NX_TEST is not set
CONFIG_IOMMU_DEBUG=y
# CONFIG_IOMMU_LEAK is not set
# CONFIG_MMIOTRACE is not set
CONFIG_IO_DELAY_TYPE_0X80=0
CONFIG_IO_DELAY_TYPE_0XED=1
CONFIG_IO_DELAY_TYPE_UDELAY=2
CONFIG_IO_DELAY_TYPE_NONE=3
CONFIG_IO_DELAY_0X80=y
# CONFIG_IO_DELAY_0XED is not set
# CONFIG_IO_DELAY_UDELAY is not set
# CONFIG_IO_DELAY_NONE is not set
CONFIG_DEFAULT_IO_DELAY_TYPE=0
CONFIG_DEBUG_BOOT_PARAMS=y
# CONFIG_CPA_DEBUG is not set
CONFIG_OPTIMIZE_INLINING=y

#
# Security options
#
# CONFIG_KEYS is not set
CONFIG_SECURITYFS=y
CONFIG_SECURITY_FILE_CAPABILITIES=y
CONFIG_CRYPTO=m

#
# Crypto core or helper
#
CONFIG_CRYPTO_FIPS=y
CONFIG_CRYPTO_ALGAPI=m
CONFIG_CRYPTO_AEAD=m
CONFIG_CRYPTO_BLKCIPHER=m
CONFIG_CRYPTO_HASH=m
CONFIG_CRYPTO_RNG=m
CONFIG_CRYPTO_MANAGER=m
CONFIG_CRYPTO_GF128MUL=m
# CONFIG_CRYPTO_NULL is not set
CONFIG_CRYPTO_CRYPTD=m
CONFIG_CRYPTO_AUTHENC=m
# CONFIG_CRYPTO_TEST is not set

#
# Authenticated Encryption with Associated Data
#
# CONFIG_CRYPTO_CCM is not set
CONFIG_CRYPTO_GCM=m
CONFIG_CRYPTO_SEQIV=m

#
# Block modes
#
CONFIG_CRYPTO_CBC=m
CONFIG_CRYPTO_CTR=m
CONFIG_CRYPTO_CTS=m
CONFIG_CRYPTO_ECB=m
CONFIG_CRYPTO_LRW=m
# CONFIG_CRYPTO_PCBC is not set
# CONFIG_CRYPTO_XTS is not set

#
# Hash modes
#
CONFIG_CRYPTO_HMAC=m
CONFIG_CRYPTO_XCBC=m

#
# Digest
#
# CONFIG_CRYPTO_CRC32C is not set
CONFIG_CRYPTO_CRC32C_INTEL=m
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=m
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_RMD128=m
CONFIG_CRYPTO_RMD160=m
CONFIG_CRYPTO_RMD256=m
CONFIG_CRYPTO_RMD320=m
CONFIG_CRYPTO_SHA1=m
# CONFIG_CRYPTO_SHA256 is not set
CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_TGR192=m
CONFIG_CRYPTO_WP512=m

#
# Ciphers
#
CONFIG_CRYPTO_AES=m
CONFIG_CRYPTO_AES_X86_64=m
CONFIG_CRYPTO_ANUBIS=m
CONFIG_CRYPTO_ARC4=m
CONFIG_CRYPTO_BLOWFISH=m
# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_CAST5 is not set
CONFIG_CRYPTO_CAST6=m
CONFIG_CRYPTO_DES=m
CONFIG_CRYPTO_FCRYPT=m
CONFIG_CRYPTO_KHAZAD=m
CONFIG_CRYPTO_SALSA20=m
# CONFIG_CRYPTO_SALSA20_X86_64 is not set
CONFIG_CRYPTO_SEED=m
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_TEA=m
CONFIG_CRYPTO_TWOFISH=m
CONFIG_CRYPTO_TWOFISH_COMMON=m
CONFIG_CRYPTO_TWOFISH_X86_64=m

#
# Compression
#
CONFIG_CRYPTO_DEFLATE=m
CONFIG_CRYPTO_LZO=m

#
# Random Number Generation
#
CONFIG_CRYPTO_ANSI_CPRNG=m
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_HIFN_795X is not set
CONFIG_HAVE_KVM=y
CONFIG_VIRTUALIZATION=y
# CONFIG_KVM is not set
CONFIG_VIRTIO=y
CONFIG_VIRTIO_RING=y
CONFIG_VIRTIO_PCI=y
CONFIG_VIRTIO_BALLOON=m

#
# Library routines
#
CONFIG_BITREVERSE=y
CONFIG_GENERIC_FIND_FIRST_BIT=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_CRC_CCITT=y
CONFIG_CRC16=y
CONFIG_CRC_T10DIF=m
CONFIG_CRC_ITU_T=y
CONFIG_CRC32=y
CONFIG_CRC7=m
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_LZO_COMPRESS=m
CONFIG_LZO_DECOMPRESS=m
CONFIG_REED_SOLOMON=m
CONFIG_REED_SOLOMON_DEC16=y
CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_FORCE_SUCCESSFUL_BUILD=y

^ permalink raw reply related	[flat|nested] 359+ messages in thread

* Re: [Announce] 2.6.29-rc6-rt3
  2009-03-08 10:25             ` Ingo Molnar
@ 2009-03-09 15:44               ` Cliff Brake
  0 siblings, 0 replies; 359+ messages in thread
From: Cliff Brake @ 2009-03-09 15:44 UTC (permalink / raw)
  To: Ingo Molnar
  Cc: Peter Zijlstra, Thomas Gleixner, rt-users, Steven Rostedt,
	Carsten Emde, Clark Williams

On Sun, Mar 8, 2009 at 6:25 AM, Ingo Molnar <mingo@elte.hu> wrote:

>
> the full commit is the one below. I've attached the bad config -
> the build bug might have been fixed meanwhile.
>
>        Ingo
>
> --------------->
> From 50f971ad73ea9550b1d8e34006bd11c7e108b24f Mon Sep 17 00:00:00 2001
> From: Ingo Molnar <mingo@elte.hu>
> Date: Wed, 22 Oct 2008 06:15:21 +0200
> Subject: [PATCH] qa: disable jffs2 for now
>
> fs/jffs2/nodemgmt.c: In function 'jffs2_find_nextblock':
> fs/jffs2/nodemgmt.c:265: error: 'struct jffs2_sb_info' has no member named 'wbuf_ofs'
> fs/jffs2/nodemgmt.c:265: error: 'struct jffs2_sb_info' has no member named 'wbuf_len'
> fs/jffs2/nodemgmt.c:266: error: 'struct jffs2_sb_info' has no member named 'wbuf_ofs'

This appears to be fixed, as I did not observe any compile problems
after re-enabling JFFS2.

Thanks,
Cliff

-- 
=======================
Cliff Brake
http://bec-systems.com
--
To unsubscribe from this list: send the line "unsubscribe linux-rt-users" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

^ permalink raw reply	[flat|nested] 359+ messages in thread

* [Announce] 2.6.29-rc7-rt1
  2009-02-24 17:57       ` [Announce] 2.6.29-rc6-rt3 Thomas Gleixner
  2009-02-25 19:34         ` Thomas Meyer
  2009-03-06 22:23         ` Cliff Brake
@ 2009-03-12 19:17         ` Thomas Gleixner
  2009-03-12 20:43           ` Tim Sander
                             ` (2 more replies)
  2 siblings, 3 replies; 359+ messages in thread
From: Thomas Gleixner @ 2009-03-12 19:17 UTC (permalink / raw)
  To: LKML
  Cc: rt-users, Ingo Molnar, Steven Rostedt, Peter Zijlstra,
	Carsten Emde, Clark Williams

We are pleased to announce the next update to our new preempt-rt
series. It contains only one new patch:
   
   - port forward to 2.6.29-rc7
   - disable CONFIG_MAXCPUS for now (undebugged runtime bug)
   - fix CONFIG_HIGHMEM problems
   - fix netfilter problems
   - make debugobjects -rt safe
   - various build fixes

Download locations:
 
    http://rt.et.redhat.com/download/
    http://www.kernel.org/pub/linux/kernel/projects/rt/
  
Information on the RT patch can be found at:

    http://rt.wiki.kernel.org/index.php/Main_Page

to build the 2.6.29-rc7-rt1 tree, the following patches should be
applied:

  http://www.kernel.org/pub/linux/kernel/v2.6/testing/linux-2.6.29-rc7.tar.bz2
  http://www.kernel.org/pub/linux/kernel/projects/rt/patch-2.6.29-rc7-rt1.bz2
  
The broken out patches are also available at the same download
locations.

Enjoy !

      tglx


^ permalink raw reply	[flat|nested] 359+ messages in thread

* Re: [Announce] 2.6.29-rc7-rt1
  2009-03-12 19:17         ` [Announce] 2.6.29-rc7-rt1 Thomas Gleixner
@ 2009-03-12 20:43           ` Tim Sander
  2009-03-13  0:34               ` Uwe Kleine-König
  2009-03-13  1:04             ` Uwe Kleine-König
  2009-03-20  0:31           ` [Announce] 2.6.29-rc78rt1 Thomas Gleixner
  2 siblings, 1 reply; 359+ messages in thread
From: Tim Sander @ 2009-03-12 20:43 UTC (permalink / raw)
  To: LKML, rt-users

Hi 

It is great to see that the -rt patchset is moving again.

> http://www.kernel.org/pub/linux/kernel/projects/rt/patch-2.6.29-rc7-rt1.bz2
This should be 
http://www.kernel.org/pub/linux/kernel/projects/rt/patch-2.6.29-rc7-rt1.patch.bz2  

As far as i understand this is again for x86. I tried some patches to get the 
ARM platform working as the platform i am working on (phytec i.mx31) is not 
supported by the stable 2.6.26-rt release. The attached patches are for 
reference only as i think some of them are on their way via the pengutronix 
git tree and others are just hacks to get this thing compile. These patches 
enable rt functionality as tested with cyclictest but the kernel is not 
stable, so some pieces are missing.

So my question is, what pieces are missing on the ARM platform to get it working?

Regards
Tim

The following patches are against the 2.6.29-rc4-rt2 in an attempt to get ARM working. 
Subject: [PATCH] add compile fixes to rt patchset for arm

---
 arch/arm/Kconfig                        |   13 +------------
 arch/arm/include/asm/thread_info.h      |    3 ++-
 arch/arm/plat-mxc/include/mach/memory.h |    2 ++
 include/linux/spinlock.h                |    3 ++-
 4 files changed, 7 insertions(+), 14 deletions(-)

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index dbfdf87..ceb2e01 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -838,18 +838,7 @@ config LOCAL_TIMERS
          accounting to be spread across the timer interval, preventing a
          "thundering herd" at every timer tick.

-config PREEMPT
-       bool "Preemptible Kernel (EXPERIMENTAL)"
-       depends on EXPERIMENTAL
-       help
-         This option reduces the latency of the kernel when reacting to
-         real-time or interactive events by allowing a low priority process to
-         be preempted even if it is in kernel mode executing a system call.
-         This allows applications to run more reliably even when the system is
-         under load.
-
-         Say Y here if you are building a kernel for a desktop, embedded
-         or real-time system.  Say N if you are unsure.
+source kernel/Kconfig.preempt

 config HZ
        int
diff --git a/arch/arm/include/asm/thread_info.h b/arch/arm/include/asm/thread_info.h
index 68b9ec8..b501541 100644
--- a/arch/arm/include/asm/thread_info.h
+++ b/arch/arm/include/asm/thread_info.h
@@ -119,7 +119,8 @@ extern void iwmmxt_task_switch(struct thread_info *);
  * We use bit 30 of the preempt_count to indicate that kernel
  * preemption is occurring.  See <asm/hardirq.h>.
  */
-#define PREEMPT_ACTIVE 0x40000000
+#define PREEMPT_ACTIVE         0x10000000
+/*FIXME TIM #define PREEMPT_ACTIVE     0x40000000*/

 /*
  * thread information flags:
diff --git a/arch/arm/plat-mxc/include/mach/memory.h 
b/arch/arm/plat-mxc/include/mach/memory.h
index 0b80839..b43a536 100644
--- a/arch/arm/plat-mxc/include/mach/memory.h
+++ b/arch/arm/plat-mxc/include/mach/memory.h
@@ -19,4 +19,6 @@
 #define PHYS_OFFSET            UL(0x80000000)
 #endif

+#define arch_is_coherent()     1
+
 #endif /* __ASM_ARCH_MXC_MEMORY_H__ */
diff --git a/include/linux/spinlock.h b/include/linux/spinlock.h
index c11b3a2..6c9b9b9 100644
--- a/include/linux/spinlock.h
+++ b/include/linux/spinlock.h
@@ -560,7 +560,8 @@ static inline void bit_spin_unlock(int bitnum, unsigned long *addr)
 # ifdef CONFIG_DEBUG_SPINLOCK
        BUG_ON(!test_bit(bitnum, addr));
 # endif
-       clear_bit_unlock(bitnum, addr);
+       //FIXME TIM  clear_bit_unlock(bitnum, addr);
+       clear_bit(bitnum,addr);
 #endif
        __release(bitlock);
 }
--
1.5.6.5

-- ---
 arch/arm/kernel/process.c |    2 +-
 include/linux/spinlock.h  |    4 ++--
 2 files changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/arm/kernel/process.c b/arch/arm/kernel/process.c
index d3ea6fa..8fbf03b 100644
--- a/arch/arm/kernel/process.c
+++ b/arch/arm/kernel/process.c
@@ -167,7 +167,7 @@ void cpu_idle(void)
                        idle();
                leds_event(led_idle_end);
                tick_nohz_restart_sched_tick();
-               preempt_enable_no_resched();
+               __preempt_enable_no_resched();
                schedule();
                preempt_disable();
        }
diff --git a/include/linux/spinlock.h b/include/linux/spinlock.h
index 6c9b9b9..130fbdd 100644
--- a/include/linux/spinlock.h
+++ b/include/linux/spinlock.h
@@ -93,6 +93,7 @@
 #include <linux/bottom_half.h>
 #include <linux/irqflags.h>
 #include <linux/pickop.h>
+#include <asm/memory.h>

 #include <asm/system.h>

@@ -560,8 +561,7 @@ static inline void bit_spin_unlock(int bitnum, unsigned long *addr)
 # ifdef CONFIG_DEBUG_SPINLOCK
        BUG_ON(!test_bit(bitnum, addr));
 # endif
-       //FIXME TIM  clear_bit_unlock(bitnum, addr);
-       clear_bit(bitnum,addr);
+       clear_bit_unlock(bitnum, addr);
 #endif
        __release(bitlock);
 }
--
1.5.6.5


''=~('(?{'.('._@@[~'^'^-)./^').'"'.('}@@~-]@_^__'^'))-^~<.;;-}').',$/})')

^ permalink raw reply related	[flat|nested] 359+ messages in thread

* Re: [Announce] 2.6.29-rc7-rt1
  2009-03-12 20:43           ` Tim Sander
@ 2009-03-13  0:34               ` Uwe Kleine-König
  0 siblings, 0 replies; 359+ messages in thread
From: Uwe Kleine-König @ 2009-03-13  0:34 UTC (permalink / raw)
  To: Tim Sander; +Cc: LKML, rt-users

Hello Tim,

On Thu, Mar 12, 2009 at 09:43:33PM +0100, Tim Sander wrote:
> So my question is, what pieces are missing on the ARM platform to get
> it working?
See the follow up mail I will write on Thomas announcement for my
current status.

> diff --git a/arch/arm/include/asm/thread_info.h b/arch/arm/include/asm/thread_info.h
> index 68b9ec8..b501541 100644
> --- a/arch/arm/include/asm/thread_info.h
> +++ b/arch/arm/include/asm/thread_info.h
> @@ -119,7 +119,8 @@ extern void iwmmxt_task_switch(struct thread_info *);
>   * We use bit 30 of the preempt_count to indicate that kernel
>   * preemption is occurring.  See <asm/hardirq.h>.
>   */
> -#define PREEMPT_ACTIVE 0x40000000
> +#define PREEMPT_ACTIVE         0x10000000
> +/*FIXME TIM #define PREEMPT_ACTIVE     0x40000000*/
I didn't need this anymore for -rc7-rt1.

>  /*
>   * thread information flags:
> diff --git a/arch/arm/plat-mxc/include/mach/memory.h 
> b/arch/arm/plat-mxc/include/mach/memory.h
> index 0b80839..b43a536 100644
> --- a/arch/arm/plat-mxc/include/mach/memory.h
> +++ b/arch/arm/plat-mxc/include/mach/memory.h
> @@ -19,4 +19,6 @@
>  #define PHYS_OFFSET            UL(0x80000000)
>  #endif
> 
> +#define arch_is_coherent()     1
> +
I suggested a better fix already last time.  Moreover I think imx isn't
coherent.

> diff --git a/include/linux/spinlock.h b/include/linux/spinlock.h
> index 6c9b9b9..130fbdd 100644
> --- a/include/linux/spinlock.h
> +++ b/include/linux/spinlock.h
> @@ -93,6 +93,7 @@
>  #include <linux/bottom_half.h>
>  #include <linux/irqflags.h>
>  #include <linux/pickop.h>
> +#include <asm/memory.h>
Doing this in arch/arm/include/asm/bitops.h is less intrusive and it
seems to me the better place.  See my patch stack.
 
> @@ -560,8 +561,7 @@ static inline void bit_spin_unlock(int bitnum, unsigned long *addr)
>  # ifdef CONFIG_DEBUG_SPINLOCK
>         BUG_ON(!test_bit(bitnum, addr));
>  # endif
> -       //FIXME TIM  clear_bit_unlock(bitnum, addr);
> -       clear_bit(bitnum,addr);
> +       clear_bit_unlock(bitnum, addr);
It would be easier to check your patch if it didn't contain reverts of
earlier changes.

Best regards
Uwe

-- 
Pengutronix e.K.                              | Uwe Kleine-König            |
Industrial Linux Solutions                    | http://www.pengutronix.de/  |

^ permalink raw reply	[flat|nested] 359+ messages in thread

* Re: [Announce] 2.6.29-rc7-rt1
@ 2009-03-13  0:34               ` Uwe Kleine-König
  0 siblings, 0 replies; 359+ messages in thread
From: Uwe Kleine-König @ 2009-03-13  0:34 UTC (permalink / raw)
  To: Tim Sander; +Cc: LKML, rt-users

Hello Tim,

On Thu, Mar 12, 2009 at 09:43:33PM +0100, Tim Sander wrote:
> So my question is, what pieces are missing on the ARM platform to get
> it working?
See the follow up mail I will write on Thomas announcement for my
current status.

> diff --git a/arch/arm/include/asm/thread_info.h b/arch/arm/include/asm/thread_info.h
> index 68b9ec8..b501541 100644
> --- a/arch/arm/include/asm/thread_info.h
> +++ b/arch/arm/include/asm/thread_info.h
> @@ -119,7 +119,8 @@ extern void iwmmxt_task_switch(struct thread_info *);
>   * We use bit 30 of the preempt_count to indicate that kernel
>   * preemption is occurring.  See <asm/hardirq.h>.
>   */
> -#define PREEMPT_ACTIVE 0x40000000
> +#define PREEMPT_ACTIVE         0x10000000
> +/*FIXME TIM #define PREEMPT_ACTIVE     0x40000000*/
I didn't need this anymore for -rc7-rt1.

>  /*
>   * thread information flags:
> diff --git a/arch/arm/plat-mxc/include/mach/memory.h 
> b/arch/arm/plat-mxc/include/mach/memory.h
> index 0b80839..b43a536 100644
> --- a/arch/arm/plat-mxc/include/mach/memory.h
> +++ b/arch/arm/plat-mxc/include/mach/memory.h
> @@ -19,4 +19,6 @@
>  #define PHYS_OFFSET            UL(0x80000000)
>  #endif
> 
> +#define arch_is_coherent()     1
> +
I suggested a better fix already last time.  Moreover I think imx isn't
coherent.

> diff --git a/include/linux/spinlock.h b/include/linux/spinlock.h
> index 6c9b9b9..130fbdd 100644
> --- a/include/linux/spinlock.h
> +++ b/include/linux/spinlock.h
> @@ -93,6 +93,7 @@
>  #include <linux/bottom_half.h>
>  #include <linux/irqflags.h>
>  #include <linux/pickop.h>
> +#include <asm/memory.h>
Doing this in arch/arm/include/asm/bitops.h is less intrusive and it
seems to me the better place.  See my patch stack.
 
> @@ -560,8 +561,7 @@ static inline void bit_spin_unlock(int bitnum, unsigned long *addr)
>  # ifdef CONFIG_DEBUG_SPINLOCK
>         BUG_ON(!test_bit(bitnum, addr));
>  # endif
> -       //FIXME TIM  clear_bit_unlock(bitnum, addr);
> -       clear_bit(bitnum,addr);
> +       clear_bit_unlock(bitnum, addr);
It would be easier to check your patch if it didn't contain reverts of
earlier changes.

Best regards
Uwe

-- 
Pengutronix e.K.                              | Uwe Kleine-König            |
Industrial Linux Solutions                    | http://www.pengutronix.de/  |
--
To unsubscribe from this list: send the line "unsubscribe linux-rt-users" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

^ permalink raw reply	[flat|nested] 359+ messages in thread

* some ARM fixes for 2.6.29-rc7-rt1
  2009-03-12 19:17         ` [Announce] 2.6.29-rc7-rt1 Thomas Gleixner
@ 2009-03-13  1:04             ` Uwe Kleine-König
  2009-03-13  1:04             ` Uwe Kleine-König
  2009-03-20  0:31           ` [Announce] 2.6.29-rc78rt1 Thomas Gleixner
  2 siblings, 0 replies; 359+ messages in thread
From: Uwe Kleine-König @ 2009-03-13  1:04 UTC (permalink / raw)
  To: Thomas Gleixner
  Cc: LKML, rt-users, Ingo Molnar, Steven Rostedt, Peter Zijlstra,
	Carsten Emde, Clark Williams

Hello,

On Thu, Mar 12, 2009 at 08:17:50PM +0100, Thomas Gleixner wrote:
> We are pleased to announce the next update to our new preempt-rt
> series. It contains only one new patch:
>    
>    - port forward to 2.6.29-rc7
>    - disable CONFIG_MAXCPUS for now (undebugged runtime bug)
>    - fix CONFIG_HIGHMEM problems
>    - fix netfilter problems
>    - make debugobjects -rt safe
>    - various build fixes
on top of 2.6.29-rc7-rc1 I did some ARM related fixes that you can find
at

	git://git.pengutronix.de/git/ukl/linux-2.6.git v2.6.29-rc7-rt1-pu

The top commit currently isn't pretty as it contains several independant
fixes.  Some of them are netX specific so you probably don't need them,
but they shouldn't hurt you either.

I will update this branch as I continue working in a non-fast-forward
manner.  I use TopGit to manage this branch, you might want to use it,
too, if you intend to follow my work.

My status quo is:

	Testing tracer sched_switch: PASSED
	Testing tracer function: PASSED
	Testing tracer irqsoff: .. no entries found ..FAILED!
	Testing tracer preemptoff: .. no entries found ..FAILED!
	Testing tracer preemptirqsoff: .. no entries found ..<4>------------[ cut here ]------------
	WARNING: at /ptx/work/octopus/WORK_2_A/ukl/gsrc/linux-2.6/kernel/trace/trace.c:683 warn_slowpath+0x18/0xa0()
	Modules linked in:
	[<c0244d40>] (dump_stack+0x0/0x18) from [<c003787c>] (warn_slowpath+0x6c/0xa0)
	[<c0037810>] (warn_slowpath+0x0/0xa0) from [<c00750d0>] (tracing_start+0x60/0xdc)
	 r3:ffffffff r2:00000000
	 r7:c074aaf0 r6:c0748a0c r5:60000013 r4:c074aac8
	[<c0075070>] (tracing_start+0x0/0xdc) from [<c0076430>] (trace_selftest_startup_preemptirqsoff+0x1ac/0x1d8)
	 r5:c1c1a000 r4:ffffffff
	[<c0076284>] (trace_selftest_startup_preemptirqsoff+0x0/0x1d8) from [<c00760c4>] (register_tracer+0x118/0x240)
	[<c0075fac>] (register_tracer+0x0/0x240) from [<c000ebbc>] (init_irqsoff_tracer+0x24/0x38)
	 r7:c000eb98 r6:00000000 r5:c001c44c r4:c001c2b8
	[<c000eb98>] (init_irqsoff_tracer+0x0/0x38) from [<c00232c4>] (__exception_text_end+0x5c/0x1a4)
	[<c0023268>] (__exception_text_end+0x0/0x1a4) from [<c00085a4>] (kernel_init+0x90/0x1c0)
	 r8:00000000 r7:00000000 r6:00000000 r5:c001c44c r4:c001c2b8
	[<c0008514>] (kernel_init+0x0/0x1c0) from [<c003aebc>] (do_exit+0x0/0x798)
	 r5:00000000 r4:00000000
	---[ end trace da227214a82491b7 ]---
	FAILED!

The warning is triggered here because tracing_start is called twice in
trace_selftest_startup_preemptirqsoff's error path[1].

I researched for some time now why the tracers doesn't pass the
self-tests, but without success.  It's bed time and any hints are
welcome.

Other than that my machine boots and reports from time to time

	scheduling while atomic

and

	sleeping function called from invalid context at kernel/rtmutex.c:683

Both errors probably happen because some spin_locks need to be converted
to raw_spin_locks.  Will look later.

I provide this uncooked state to prevent duplicate work, so please
excuse the bad code and commit history.  If it upsets you, please send
patches :-)

Best regards
Uwe

[1] if trace_test_buffer sets count = 0 or returns != 0 in
kernel/trace/trace_selftest.c:440, the code flow is:

	tracing_start()
	goto out;

	...
out:
	trace->reset(tr);
	tracing_start();

I think the last tracing_start is wrong, but I didn't check deeply.

-- 
Pengutronix e.K.                              | Uwe Kleine-König            |
Industrial Linux Solutions                    | http://www.pengutronix.de/  |

^ permalink raw reply	[flat|nested] 359+ messages in thread

* some ARM fixes for 2.6.29-rc7-rt1
@ 2009-03-13  1:04             ` Uwe Kleine-König
  0 siblings, 0 replies; 359+ messages in thread
From: Uwe Kleine-König @ 2009-03-13  1:04 UTC (permalink / raw)
  To: Thomas Gleixner
  Cc: LKML, rt-users, Ingo Molnar, Steven Rostedt, Peter Zijlstra,
	Carsten Emde, Clark Williams

Hello,

On Thu, Mar 12, 2009 at 08:17:50PM +0100, Thomas Gleixner wrote:
> We are pleased to announce the next update to our new preempt-rt
> series. It contains only one new patch:
>    
>    - port forward to 2.6.29-rc7
>    - disable CONFIG_MAXCPUS for now (undebugged runtime bug)
>    - fix CONFIG_HIGHMEM problems
>    - fix netfilter problems
>    - make debugobjects -rt safe
>    - various build fixes
on top of 2.6.29-rc7-rc1 I did some ARM related fixes that you can find
at

	git://git.pengutronix.de/git/ukl/linux-2.6.git v2.6.29-rc7-rt1-pu

The top commit currently isn't pretty as it contains several independant
fixes.  Some of them are netX specific so you probably don't need them,
but they shouldn't hurt you either.

I will update this branch as I continue working in a non-fast-forward
manner.  I use TopGit to manage this branch, you might want to use it,
too, if you intend to follow my work.

My status quo is:

	Testing tracer sched_switch: PASSED
	Testing tracer function: PASSED
	Testing tracer irqsoff: .. no entries found ..FAILED!
	Testing tracer preemptoff: .. no entries found ..FAILED!
	Testing tracer preemptirqsoff: .. no entries found ..<4>------------[ cut here ]------------
	WARNING: at /ptx/work/octopus/WORK_2_A/ukl/gsrc/linux-2.6/kernel/trace/trace.c:683 warn_slowpath+0x18/0xa0()
	Modules linked in:
	[<c0244d40>] (dump_stack+0x0/0x18) from [<c003787c>] (warn_slowpath+0x6c/0xa0)
	[<c0037810>] (warn_slowpath+0x0/0xa0) from [<c00750d0>] (tracing_start+0x60/0xdc)
	 r3:ffffffff r2:00000000
	 r7:c074aaf0 r6:c0748a0c r5:60000013 r4:c074aac8
	[<c0075070>] (tracing_start+0x0/0xdc) from [<c0076430>] (trace_selftest_startup_preemptirqsoff+0x1ac/0x1d8)
	 r5:c1c1a000 r4:ffffffff
	[<c0076284>] (trace_selftest_startup_preemptirqsoff+0x0/0x1d8) from [<c00760c4>] (register_tracer+0x118/0x240)
	[<c0075fac>] (register_tracer+0x0/0x240) from [<c000ebbc>] (init_irqsoff_tracer+0x24/0x38)
	 r7:c000eb98 r6:00000000 r5:c001c44c r4:c001c2b8
	[<c000eb98>] (init_irqsoff_tracer+0x0/0x38) from [<c00232c4>] (__exception_text_end+0x5c/0x1a4)
	[<c0023268>] (__exception_text_end+0x0/0x1a4) from [<c00085a4>] (kernel_init+0x90/0x1c0)
	 r8:00000000 r7:00000000 r6:00000000 r5:c001c44c r4:c001c2b8
	[<c0008514>] (kernel_init+0x0/0x1c0) from [<c003aebc>] (do_exit+0x0/0x798)
	 r5:00000000 r4:00000000
	---[ end trace da227214a82491b7 ]---
	FAILED!

The warning is triggered here because tracing_start is called twice in
trace_selftest_startup_preemptirqsoff's error path[1].

I researched for some time now why the tracers doesn't pass the
self-tests, but without success.  It's bed time and any hints are
welcome.

Other than that my machine boots and reports from time to time

	scheduling while atomic

and

	sleeping function called from invalid context at kernel/rtmutex.c:683

Both errors probably happen because some spin_locks need to be converted
to raw_spin_locks.  Will look later.

I provide this uncooked state to prevent duplicate work, so please
excuse the bad code and commit history.  If it upsets you, please send
patches :-)

Best regards
Uwe

[1] if trace_test_buffer sets count = 0 or returns != 0 in
kernel/trace/trace_selftest.c:440, the code flow is:

	tracing_start()
	goto out;

	...
out:
	trace->reset(tr);
	tracing_start();

I think the last tracing_start is wrong, but I didn't check deeply.

-- 
Pengutronix e.K.                              | Uwe Kleine-König            |
Industrial Linux Solutions                    | http://www.pengutronix.de/  |
--
To unsubscribe from this list: send the line "unsubscribe linux-rt-users" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

^ permalink raw reply	[flat|nested] 359+ messages in thread

* Re: some ARM fixes for 2.6.29-rc7-rt1
  2009-03-13  1:04             ` Uwe Kleine-König
@ 2009-03-15  6:48               ` Uwe Kleine-König
  -1 siblings, 0 replies; 359+ messages in thread
From: Uwe Kleine-König @ 2009-03-15  6:48 UTC (permalink / raw)
  To: Thomas Gleixner
  Cc: LKML, rt-users, Ingo Molnar, Steven Rostedt, Peter Zijlstra,
	Carsten Emde, Clark Williams

Hello,

On Fri, Mar 13, 2009 at 02:04:58AM +0100, Uwe Kleine-König wrote:
> on top of 2.6.29-rc7-rc1 I did some ARM related fixes that you can find
> at
> 
> 	git://git.pengutronix.de/git/ukl/linux-2.6.git v2.6.29-rc7-rt1-pu
> 
> The top commit currently isn't pretty as it contains several independant
> fixes.  Some of them are netX specific so you probably don't need them,
> but they shouldn't hurt you either.
> 
> I will update this branch as I continue working in a non-fast-forward
> manner.  I use TopGit to manage this branch, you might want to use it,
> too, if you intend to follow my work.
> 
> My status quo is:
> 
> 	Testing tracer sched_switch: PASSED
> 	Testing tracer function: PASSED
> 	Testing tracer irqsoff: .. no entries found ..FAILED!
> 	Testing tracer preemptoff: .. no entries found ..FAILED!
> 	Testing tracer preemptirqsoff: .. no entries found ..
[removed stack dump]
> 	FAILED!
I still have this problem.  I digged into irqsoff without finding the reason.

Looking at trace_selftest_startup_irqsoff I saw that
trace_buffer_lock_reserve is called thrice successfully.

Steven (or someone else of course), do you can give me a hint?

> Other than that my machine boots and reports from time to time
> 
> 	scheduling while atomic
> 
> and
> 
> 	sleeping function called from invalid context at kernel/rtmutex.c:683
> 
> Both errors probably happen because some spin_locks need to be converted
> to raw_spin_locks.  Will look later.
Up to now I didn't try to do much with my system, but just booting
doesn't yield such BUGs or Warnings anymore.
 
Best regards
Uwe

-- 
Pengutronix e.K.                              | Uwe Kleine-König            |
Industrial Linux Solutions                    | http://www.pengutronix.de/  |

^ permalink raw reply	[flat|nested] 359+ messages in thread

* Re: some ARM fixes for 2.6.29-rc7-rt1
@ 2009-03-15  6:48               ` Uwe Kleine-König
  0 siblings, 0 replies; 359+ messages in thread
From: Uwe Kleine-König @ 2009-03-15  6:48 UTC (permalink / raw)
  To: Thomas Gleixner
  Cc: LKML, rt-users, Ingo Molnar, Steven Rostedt, Peter Zijlstra,
	Carsten Emde, Clark Williams

Hello,

On Fri, Mar 13, 2009 at 02:04:58AM +0100, Uwe Kleine-König wrote:
> on top of 2.6.29-rc7-rc1 I did some ARM related fixes that you can find
> at
> 
> 	git://git.pengutronix.de/git/ukl/linux-2.6.git v2.6.29-rc7-rt1-pu
> 
> The top commit currently isn't pretty as it contains several independant
> fixes.  Some of them are netX specific so you probably don't need them,
> but they shouldn't hurt you either.
> 
> I will update this branch as I continue working in a non-fast-forward
> manner.  I use TopGit to manage this branch, you might want to use it,
> too, if you intend to follow my work.
> 
> My status quo is:
> 
> 	Testing tracer sched_switch: PASSED
> 	Testing tracer function: PASSED
> 	Testing tracer irqsoff: .. no entries found ..FAILED!
> 	Testing tracer preemptoff: .. no entries found ..FAILED!
> 	Testing tracer preemptirqsoff: .. no entries found ..
[removed stack dump]
> 	FAILED!
I still have this problem.  I digged into irqsoff without finding the reason.

Looking at trace_selftest_startup_irqsoff I saw that
trace_buffer_lock_reserve is called thrice successfully.

Steven (or someone else of course), do you can give me a hint?

> Other than that my machine boots and reports from time to time
> 
> 	scheduling while atomic
> 
> and
> 
> 	sleeping function called from invalid context at kernel/rtmutex.c:683
> 
> Both errors probably happen because some spin_locks need to be converted
> to raw_spin_locks.  Will look later.
Up to now I didn't try to do much with my system, but just booting
doesn't yield such BUGs or Warnings anymore.
 
Best regards
Uwe

-- 
Pengutronix e.K.                              | Uwe Kleine-König            |
Industrial Linux Solutions                    | http://www.pengutronix.de/  |
--
To unsubscribe from this list: send the line "unsubscribe linux-rt-users" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

^ permalink raw reply	[flat|nested] 359+ messages in thread

* [Announce] 2.6.29-rc78rt1
  2009-03-12 19:17         ` [Announce] 2.6.29-rc7-rt1 Thomas Gleixner
  2009-03-12 20:43           ` Tim Sander
  2009-03-13  1:04             ` Uwe Kleine-König
@ 2009-03-20  0:31           ` Thomas Gleixner
  2009-03-20  1:38             ` Frank Rowand
                               ` (2 more replies)
  2 siblings, 3 replies; 359+ messages in thread
From: Thomas Gleixner @ 2009-03-20  0:31 UTC (permalink / raw)
  To: LKML
  Cc: rt-users, Ingo Molnar, Steven Rostedt, Peter Zijlstra,
	Carsten Emde, Clark Williams, Frank Rowand

We are pleased to announce the next update to our new preempt-rt
series.
   
   - port forward to 2.6.29-rc8
   - disable -rt conflicting config options
   - hotplug cpu fixes (peterz)
   - slab/pagealloc lock breaks (peterz / tglx) 
   - sigqueue caching for -rt tasks
   - posixtimer thread avoid useless wakeups
   - various build fixes (mingo, frank ....)
   - lots of tracer updates from -tip (check the tip git logs)

The outstanding improvement is the slab/pagealloc change which breaks
and splits locking and brought down worst case latencies in
problematic use cases from >500us to <100us.

As a side note:

   There seems to be a wide spread underestimation of the problem spots
   exposed by preempt-rt. The usual shrug off answer is:

	"I don't care about -rt. Come back if you can expose the same
	problem in the mainline kernel."

   This is a fundamentally wrong answer.

   	preempt-rt mostly exposes existing latency spots and magnifies
   	them
   
	Reducing latencies in -rt by a factor 5 will be not that
	prominent in a non-rt setup, but the problematic code area
	will still produce measureable latency problems.
   
   I'm well aware of the tradeoff between determinitic behaviour and
   throughput, but problematic spots (e.g. lock contentions) hurt
   both.

   So can we please put down the stupid "I don't care about -rt"
   attitudes and accept that we have to think about the mutual
   benefits of deterministic and throughput aspects without hurting
   each other ?


Download locations:
 
    http://rt.et.redhat.com/download/
    http://www.kernel.org/pub/linux/kernel/projects/rt/
  
Information on the RT patch can be found at:

    http://rt.wiki.kernel.org/index.php/Main_Page

to build the 2.6.29-rc8-rt1 tree, the following patches should be
applied:

  http://www.kernel.org/pub/linux/kernel/v2.6/testing/linux-2.6.29-rc8.tar.bz2
  http://www.kernel.org/pub/linux/kernel/projects/rt/patch-2.6.29-rc8-rt1.bz2
  
The broken out patches are also available at the same download
locations.

Enjoy !

       tglx
 
P.S.: ARM/PowerPC support is in the pipeline and will be available
      with -rt2 (hopefully :)


^ permalink raw reply	[flat|nested] 359+ messages in thread

* Re: [Announce] 2.6.29-rc78rt1
  2009-03-20  0:31           ` [Announce] 2.6.29-rc78rt1 Thomas Gleixner
@ 2009-03-20  1:38             ` Frank Rowand
  2009-03-20 15:48               ` Thomas Gleixner
  2009-03-20 16:31               ` Cliff Brake
  2009-03-20 17:45             ` [Announce] 2.6.29-rc8-rt2 Thomas Gleixner
  2 siblings, 1 reply; 359+ messages in thread
From: Frank Rowand @ 2009-03-20  1:38 UTC (permalink / raw)
  To: Thomas Gleixner; +Cc: rt-users

Thomas Gleixner wrote:
> We are pleased to announce the next update to our new preempt-rt
> series.
>    

( snip )

>    - lots of tracer updates from -tip (check the tip git logs)

I have been trying to reverse engineer which git commits
comprise origin.patch, but my git-foo is not up to the
task.  For any single file in origin.patch, I can work
backwards to find the git commit associated with it, but I
don't know how to easily create a list of all of the git commits
that are associated with origin.patch.  Do you have any quick
hints that would assist me in my quest?

Thanks!

Frank Rowand
Sony Corporation of America


^ permalink raw reply	[flat|nested] 359+ messages in thread

* Re: [Announce] 2.6.29-rc78rt1
  2009-03-20  1:38             ` Frank Rowand
@ 2009-03-20 15:48               ` Thomas Gleixner
  2009-03-20 21:55                 ` Frank Rowand
  0 siblings, 1 reply; 359+ messages in thread
From: Thomas Gleixner @ 2009-03-20 15:48 UTC (permalink / raw)
  To: Frank Rowand; +Cc: rt-users

On Thu, 19 Mar 2009, Frank Rowand wrote:
> 
> >    - lots of tracer updates from -tip (check the tip git logs)
> 
> I have been trying to reverse engineer which git commits
> comprise origin.patch, but my git-foo is not up to the
> task.  For any single file in origin.patch, I can work
> backwards to find the git commit associated with it, but I
> don't know how to easily create a list of all of the git commits
> that are associated with origin.patch.  Do you have any quick
> hints that would assist me in my quest?

  git log v.2.6.29-rc8..

I'm going to add a log to the broken out tarball next time.

Thanks,

	tglx


^ permalink raw reply	[flat|nested] 359+ messages in thread

* Re: [Announce] 2.6.29-rc78rt1
  2009-03-20  0:31           ` [Announce] 2.6.29-rc78rt1 Thomas Gleixner
@ 2009-03-20 16:31               ` Cliff Brake
  2009-03-20 16:31               ` Cliff Brake
  2009-03-20 17:45             ` [Announce] 2.6.29-rc8-rt2 Thomas Gleixner
  2 siblings, 0 replies; 359+ messages in thread
From: Cliff Brake @ 2009-03-20 16:31 UTC (permalink / raw)
  To: Thomas Gleixner
  Cc: LKML, rt-users, Ingo Molnar, Steven Rostedt, Peter Zijlstra,
	Carsten Emde, Clark Williams, Frank Rowand

On Thu, Mar 19, 2009 at 8:31 PM, Thomas Gleixner <tglx@linutronix.de> wrote:
> We are pleased to announce the next update to our new preempt-rt
> series.

> P.S.: ARM/PowerPC support is in the pipeline and will be available
>      with -rt2 (hopefully :)

Do you have a time estimate for -rt2/ARM support, and is there
anything that can be done to help (testing, etc).

Thanks,
Cliff

-- 
=======================
Cliff Brake
http://bec-systems.com

^ permalink raw reply	[flat|nested] 359+ messages in thread

* Re: [Announce] 2.6.29-rc78rt1
@ 2009-03-20 16:31               ` Cliff Brake
  0 siblings, 0 replies; 359+ messages in thread
From: Cliff Brake @ 2009-03-20 16:31 UTC (permalink / raw)
  To: Thomas Gleixner
  Cc: LKML, rt-users, Ingo Molnar, Steven Rostedt, Peter Zijlstra,
	Carsten Emde, Clark Williams, Frank Rowand

On Thu, Mar 19, 2009 at 8:31 PM, Thomas Gleixner <tglx@linutronix.de> wrote:
> We are pleased to announce the next update to our new preempt-rt
> series.

> P.S.: ARM/PowerPC support is in the pipeline and will be available
>      with -rt2 (hopefully :)

Do you have a time estimate for -rt2/ARM support, and is there
anything that can be done to help (testing, etc).

Thanks,
Cliff

-- 
=======================
Cliff Brake
http://bec-systems.com
--
To unsubscribe from this list: send the line "unsubscribe linux-rt-users" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

^ permalink raw reply	[flat|nested] 359+ messages in thread

* [Announce] 2.6.29-rc8-rt2
  2009-03-20  0:31           ` [Announce] 2.6.29-rc78rt1 Thomas Gleixner
  2009-03-20  1:38             ` Frank Rowand
  2009-03-20 16:31               ` Cliff Brake
@ 2009-03-20 17:45             ` Thomas Gleixner
  2009-03-20 19:19                 ` Will Schmidt
  2009-03-23 16:26               ` [Announce] 2.6.29-rc8-rt3 Thomas Gleixner
  2 siblings, 2 replies; 359+ messages in thread
From: Thomas Gleixner @ 2009-03-20 17:45 UTC (permalink / raw)
  To: LKML
  Cc: rt-users, Ingo Molnar, Steven Rostedt, Peter Zijlstra,
	Carsten Emde, Clark Williams, Frank Rowand

We are pleased to announce the next update to our new preempt-rt
series.
    
     - resurrected ARM and PowerPC support
     - tracing fixes for ARM (Uwe Kleine-Koenig)

The support for ARM/PowerPC has only been lightly tested. It might
crash and burn your system, make your hair curl, frigthen your cat and
give you sleepless nights. You have been warned !

On PowerPC watch out for the following warning:

   __do_IRQ called for irq X. PREEMPT_RT will crash your system soon.

__do_IRQ is deprecated and -rt does not support it anymore. Most of
the PowerPC subarchitectures do not longer use it, but you might be
unlucky and hit one of the remaining users. RT will spit out the
message above and then do what it said. :)

Download locations:
 
    http://rt.et.redhat.com/download/
    http://www.kernel.org/pub/linux/kernel/projects/rt/
  
Information on the RT patch can be found at:

    http://rt.wiki.kernel.org/index.php/Main_Page

to build the 2.6.29-rc8-rt1 tree, the following patches should be
applied:

  http://www.kernel.org/pub/linux/kernel/v2.6/testing/linux-2.6.29-rc8.tar.bz2
  http://www.kernel.org/pub/linux/kernel/projects/rt/patch-2.6.29-rc8-rt2.bz2
  
The broken out patches are also available at the same download
locations.

Enjoy !

       tglx

^ permalink raw reply	[flat|nested] 359+ messages in thread

* Re: [Announce] 2.6.29-rc78rt1
  2009-03-20 16:31               ` Cliff Brake
  (?)
@ 2009-03-20 17:48               ` Thomas Gleixner
  -1 siblings, 0 replies; 359+ messages in thread
From: Thomas Gleixner @ 2009-03-20 17:48 UTC (permalink / raw)
  To: Cliff Brake
  Cc: LKML, rt-users, Ingo Molnar, Steven Rostedt, Peter Zijlstra,
	Carsten Emde, Clark Williams, Frank Rowand

On Fri, 20 Mar 2009, Cliff Brake wrote:

> On Thu, Mar 19, 2009 at 8:31 PM, Thomas Gleixner <tglx@linutronix.de> wrote:
> > We are pleased to announce the next update to our new preempt-rt
> > series.
> 
> > P.S.: ARM/PowerPC support is in the pipeline and will be available
> > with -rt2 (hopefully :)
> 
> Do you have a time estimate for -rt2/ARM support, and is there

Time estimate is about: now minus 20sec :)

> anything that can be done to help (testing, etc).

Yup, the patches need full testing.

Thanks,

	tglx



^ permalink raw reply	[flat|nested] 359+ messages in thread

* Re: [Announce] 2.6.29-rc8-rt2
  2009-03-20 17:45             ` [Announce] 2.6.29-rc8-rt2 Thomas Gleixner
@ 2009-03-20 19:19                 ` Will Schmidt
  2009-03-23 16:26               ` [Announce] 2.6.29-rc8-rt3 Thomas Gleixner
  1 sibling, 0 replies; 359+ messages in thread
From: Will Schmidt @ 2009-03-20 19:19 UTC (permalink / raw)
  To: Thomas Gleixner
  Cc: LKML, rt-users, Ingo Molnar, Steven Rostedt, Peter Zijlstra,
	Carsten Emde, Clark Williams, Frank Rowand

On Fri, 2009-03-20 at 18:45 +0100, Thomas Gleixner wrote:
> We are pleased to announce the next update to our new preempt-rt
> series.
>     
>      - resurrected ARM and PowerPC support
>      - tracing fixes for ARM (Uwe Kleine-Koenig)
> 
> The support for ARM/PowerPC has only been lightly tested. It might
> crash and burn your system, make your hair curl, frigthen your cat and
> give you sleepless nights. You have been warned !

During a build attempt on powerpc, I am seeing:

In file included from include/linux/mmzone.h:776,
                 from include/linux/gfp.h:5,
                 from include/linux/slab.h:13,
                 from include/linux/percpu.h:6,
                 from include/linux/rcupdate.h:40,
                 from include/linux/rculist.h:11,
                 from include/linux/dcache.h:7,
                 from include/linux/fs.h:299,
                 from init/do_mounts_rd.c:4:
/root/linux-2.6.29-rc8/arch/powerpc/include/asm/mmzone.h:32: error:
expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before
‘numa_cpumask_lookup_table’
In file included from include/linux/topology.h:35,
                 from include/linux/gfp.h:8,
                 from include/linux/slab.h:13,
                 from include/linux/percpu.h:6,
                 from include/linux/rcupdate.h:40,
                 from include/linux/rculist.h:11,
                 from include/linux/dcache.h:7,
                 from include/linux/fs.h:299,
                 from init/do_mounts_rd.c:4:
/root/linux-2.6.29-rc8/arch/powerpc/include/asm/topology.h: In function
‘node_to_cpumask’:
/root/linux-2.6.29-rc8/arch/powerpc/include/asm/topology.h:22: error:
‘numa_cpumask_lookup_table’ undeclared (first use in this function)
/root/linux-2.6.29-rc8/arch/powerpc/include/asm/topology.h:22: error:
(Each undeclared identifier is reported only once
/root/linux-2.6.29-rc8/arch/powerpc/include/asm/topology.h:22: error:
for each function it appears in.)
/root/linux-2.6.29-rc8/arch/powerpc/include/asm/topology.h: In function
‘node_to_first_cpu’:
/root/linux-2.6.29-rc8/arch/powerpc/include/asm/topology.h:29: error:
‘numa_cpumask_lookup_table’ undeclared (first use in this function)
make[1]: *** [init/do_mounts_rd.o] Error 1
make[1]: *** Waiting for unfinished jobs....



I have locally fixed by adding an include just above the cpumask_t
reference.  The include may belong elsewhere, but in case I got it
right,.. :-)

Signed-Off-By:  Will Schmidt <will_schmidt@vnet.ibm.com>

--


diff --git a/arch/powerpc/include/asm/mmzone.h
b/arch/powerpc/include/asm/mmzone.h
index 19f299b..530fa41 100644
--- a/arch/powerpc/include/asm/mmzone.h
+++ b/arch/powerpc/include/asm/mmzone.h
@@ -28,6 +28,8 @@ extern struct pglist_data *node_data[];
  * Following are specific to this numa platform.
  */

+#include <linux/cpumask.h>
+
 extern int numa_cpu_lookup_table[];
 extern cpumask_t numa_cpumask_lookup_table[];
 #ifdef CONFIG_MEMORY_HOTPLUG



Thanks, 
-Will

> 
> On PowerPC watch out for the following warning:
> 
>    __do_IRQ called for irq X. PREEMPT_RT will crash your system soon.
> 
> __do_IRQ is deprecated and -rt does not support it anymore. Most of
> the PowerPC subarchitectures do not longer use it, but you might be
> unlucky and hit one of the remaining users. RT will spit out the
> message above and then do what it said. :)
> 
> Download locations:
>  
>     http://rt.et.redhat.com/download/
>     http://www.kernel.org/pub/linux/kernel/projects/rt/
>   
> Information on the RT patch can be found at:
> 
>     http://rt.wiki.kernel.org/index.php/Main_Page
> 
> to build the 2.6.29-rc8-rt1 tree, the following patches should be
> applied:
> 
>   http://www.kernel.org/pub/linux/kernel/v2.6/testing/linux-2.6.29-rc8.tar.bz2
>   http://www.kernel.org/pub/linux/kernel/projects/rt/patch-2.6.29-rc8-rt2.bz2
>   
> The broken out patches are also available at the same download
> locations.
> 
> Enjoy !
> 
>        tglx
> --
> To unsubscribe from this list: send the line "unsubscribe linux-rt-users" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> 


^ permalink raw reply related	[flat|nested] 359+ messages in thread

* Re: [Announce] 2.6.29-rc8-rt2
@ 2009-03-20 19:19                 ` Will Schmidt
  0 siblings, 0 replies; 359+ messages in thread
From: Will Schmidt @ 2009-03-20 19:19 UTC (permalink / raw)
  To: Thomas Gleixner
  Cc: LKML, rt-users, Ingo Molnar, Steven Rostedt, Peter Zijlstra,
	Carsten Emde, Clark Williams, Frank Rowand

On Fri, 2009-03-20 at 18:45 +0100, Thomas Gleixner wrote:
> We are pleased to announce the next update to our new preempt-rt
> series.
>     
>      - resurrected ARM and PowerPC support
>      - tracing fixes for ARM (Uwe Kleine-Koenig)
> 
> The support for ARM/PowerPC has only been lightly tested. It might
> crash and burn your system, make your hair curl, frigthen your cat and
> give you sleepless nights. You have been warned !

During a build attempt on powerpc, I am seeing:

In file included from include/linux/mmzone.h:776,
                 from include/linux/gfp.h:5,
                 from include/linux/slab.h:13,
                 from include/linux/percpu.h:6,
                 from include/linux/rcupdate.h:40,
                 from include/linux/rculist.h:11,
                 from include/linux/dcache.h:7,
                 from include/linux/fs.h:299,
                 from init/do_mounts_rd.c:4:
/root/linux-2.6.29-rc8/arch/powerpc/include/asm/mmzone.h:32: error:
expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before
‘numa_cpumask_lookup_table’
In file included from include/linux/topology.h:35,
                 from include/linux/gfp.h:8,
                 from include/linux/slab.h:13,
                 from include/linux/percpu.h:6,
                 from include/linux/rcupdate.h:40,
                 from include/linux/rculist.h:11,
                 from include/linux/dcache.h:7,
                 from include/linux/fs.h:299,
                 from init/do_mounts_rd.c:4:
/root/linux-2.6.29-rc8/arch/powerpc/include/asm/topology.h: In function
‘node_to_cpumask’:
/root/linux-2.6.29-rc8/arch/powerpc/include/asm/topology.h:22: error:
‘numa_cpumask_lookup_table’ undeclared (first use in this function)
/root/linux-2.6.29-rc8/arch/powerpc/include/asm/topology.h:22: error:
(Each undeclared identifier is reported only once
/root/linux-2.6.29-rc8/arch/powerpc/include/asm/topology.h:22: error:
for each function it appears in.)
/root/linux-2.6.29-rc8/arch/powerpc/include/asm/topology.h: In function
‘node_to_first_cpu’:
/root/linux-2.6.29-rc8/arch/powerpc/include/asm/topology.h:29: error:
‘numa_cpumask_lookup_table’ undeclared (first use in this function)
make[1]: *** [init/do_mounts_rd.o] Error 1
make[1]: *** Waiting for unfinished jobs....



I have locally fixed by adding an include just above the cpumask_t
reference.  The include may belong elsewhere, but in case I got it
right,.. :-)

Signed-Off-By:  Will Schmidt <will_schmidt@vnet.ibm.com>

--


diff --git a/arch/powerpc/include/asm/mmzone.h
b/arch/powerpc/include/asm/mmzone.h
index 19f299b..530fa41 100644
--- a/arch/powerpc/include/asm/mmzone.h
+++ b/arch/powerpc/include/asm/mmzone.h
@@ -28,6 +28,8 @@ extern struct pglist_data *node_data[];
  * Following are specific to this numa platform.
  */

+#include <linux/cpumask.h>
+
 extern int numa_cpu_lookup_table[];
 extern cpumask_t numa_cpumask_lookup_table[];
 #ifdef CONFIG_MEMORY_HOTPLUG



Thanks, 
-Will

> 
> On PowerPC watch out for the following warning:
> 
>    __do_IRQ called for irq X. PREEMPT_RT will crash your system soon.
> 
> __do_IRQ is deprecated and -rt does not support it anymore. Most of
> the PowerPC subarchitectures do not longer use it, but you might be
> unlucky and hit one of the remaining users. RT will spit out the
> message above and then do what it said. :)
> 
> Download locations:
>  
>     http://rt.et.redhat.com/download/
>     http://www.kernel.org/pub/linux/kernel/projects/rt/
>   
> Information on the RT patch can be found at:
> 
>     http://rt.wiki.kernel.org/index.php/Main_Page
> 
> to build the 2.6.29-rc8-rt1 tree, the following patches should be
> applied:
> 
>   http://www.kernel.org/pub/linux/kernel/v2.6/testing/linux-2.6.29-rc8.tar.bz2
>   http://www.kernel.org/pub/linux/kernel/projects/rt/patch-2.6.29-rc8-rt2.bz2
>   
> The broken out patches are also available at the same download
> locations.
> 
> Enjoy !
> 
>        tglx
> --
> To unsubscribe from this list: send the line "unsubscribe linux-rt-users" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> 

--
To unsubscribe from this list: send the line "unsubscribe linux-rt-users" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

^ permalink raw reply related	[flat|nested] 359+ messages in thread

* Re: [Announce] 2.6.29-rc8-rt2
  2009-03-20 19:19                 ` Will Schmidt
@ 2009-03-20 19:25                   ` Ingo Molnar
  -1 siblings, 0 replies; 359+ messages in thread
From: Ingo Molnar @ 2009-03-20 19:25 UTC (permalink / raw)
  To: Will Schmidt
  Cc: Thomas Gleixner, LKML, rt-users, Steven Rostedt, Peter Zijlstra,
	Carsten Emde, Clark Williams, Frank Rowand


* Will Schmidt <will_schmidt@vnet.ibm.com> wrote:

> On Fri, 2009-03-20 at 18:45 +0100, Thomas Gleixner wrote:
> > We are pleased to announce the next update to our new preempt-rt
> > series.
> >     
> >      - resurrected ARM and PowerPC support
> >      - tracing fixes for ARM (Uwe Kleine-Koenig)
> > 
> > The support for ARM/PowerPC has only been lightly tested. It might
> > crash and burn your system, make your hair curl, frigthen your cat and
> > give you sleepless nights. You have been warned !
> 
> During a build attempt on powerpc, I am seeing:
> 
> In file included from include/linux/mmzone.h:776,
>                  from include/linux/gfp.h:5,
>                  from include/linux/slab.h:13,
>                  from include/linux/percpu.h:6,
>                  from include/linux/rcupdate.h:40,
>                  from include/linux/rculist.h:11,
>                  from include/linux/dcache.h:7,
>                  from include/linux/fs.h:299,
>                  from init/do_mounts_rd.c:4:
> /root/linux-2.6.29-rc8/arch/powerpc/include/asm/mmzone.h:32: error:
> expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before
> ‘numa_cpumask_lookup_table’
> In file included from include/linux/topology.h:35,
>                  from include/linux/gfp.h:8,
>                  from include/linux/slab.h:13,
>                  from include/linux/percpu.h:6,
>                  from include/linux/rcupdate.h:40,
>                  from include/linux/rculist.h:11,
>                  from include/linux/dcache.h:7,
>                  from include/linux/fs.h:299,
>                  from init/do_mounts_rd.c:4:
> /root/linux-2.6.29-rc8/arch/powerpc/include/asm/topology.h: In function
> ‘node_to_cpumask’:
> /root/linux-2.6.29-rc8/arch/powerpc/include/asm/topology.h:22: error:
> ‘numa_cpumask_lookup_table’ undeclared (first use in this function)
> /root/linux-2.6.29-rc8/arch/powerpc/include/asm/topology.h:22: error:
> (Each undeclared identifier is reported only once
> /root/linux-2.6.29-rc8/arch/powerpc/include/asm/topology.h:22: error:
> for each function it appears in.)
> /root/linux-2.6.29-rc8/arch/powerpc/include/asm/topology.h: In function
> ‘node_to_first_cpu’:
> /root/linux-2.6.29-rc8/arch/powerpc/include/asm/topology.h:29: error:
> ‘numa_cpumask_lookup_table’ undeclared (first use in this function)
> make[1]: *** [init/do_mounts_rd.o] Error 1
> make[1]: *** Waiting for unfinished jobs....
> 
> 
> 
> I have locally fixed by adding an include just above the cpumask_t
> reference.  The include may belong elsewhere, but in case I got it
> right,.. :-)
> 
> Signed-Off-By:  Will Schmidt <will_schmidt@vnet.ibm.com>

you got it right :-) The full fix (the bug also affects sparc) is 
already queued up - see it below.

	Ingo

-------------->
>From 0c7e5b187fc599a40c1e6392926424d26cd0cf41 Mon Sep 17 00:00:00 2001
From: Stephen Rothwell <sfr@canb.auug.org.au>
Date: Thu, 19 Mar 2009 22:03:22 +1100
Subject: [PATCH] numa, cpumask: move numa_node_id default implementation to topology.h, fix

Impact: build fix for powerpc and sparc

Today's linux-next build (powerpc allyesconfig) failed like this:

> In file included from include/linux/mmzone.h:776,
>                  from include/linux/gfp.h:5,
>                  from include/linux/kmod.h:23,
>                  from include/linux/module.h:14,
>                  from init/version.c:11:
> arch/powerpc/include/asm/mmzone.h:32: error: expected '=', ',', ';', 'asm' or '__attribute__' before 'numa_cpumask_lookup_table'

Caused by commit 082edb7bf443eb8eda15b482d16ad9dd8137ad24 ("numa,
cpumask: move numa_node_id default implementation to topology.h") from
the cpus4096 tree which removed the include of linux/topology.h from
linux/mmzone.h.

Same for sparc64 defconfig.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Acked-b: Rusty Russell <rusty@rustcorp.com.au>
Cc: ppc-dev <linuxppc-dev@ozlabs.org>
LKML-Reference: <20090319220322.3baa4613.sfr@canb.auug.org.au>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/powerpc/include/asm/mmzone.h |    1 +
 arch/sparc/include/asm/mmzone.h   |    2 ++
 2 files changed, 3 insertions(+), 0 deletions(-)

diff --git a/arch/powerpc/include/asm/mmzone.h b/arch/powerpc/include/asm/mmzone.h
index 19f299b..35acac9 100644
--- a/arch/powerpc/include/asm/mmzone.h
+++ b/arch/powerpc/include/asm/mmzone.h
@@ -8,6 +8,7 @@
 #define _ASM_MMZONE_H_
 #ifdef __KERNEL__
 
+#include <linux/cpumask.h>
 
 /*
  * generic non-linear memory support:
diff --git a/arch/sparc/include/asm/mmzone.h b/arch/sparc/include/asm/mmzone.h
index ebf5986..e8c6487 100644
--- a/arch/sparc/include/asm/mmzone.h
+++ b/arch/sparc/include/asm/mmzone.h
@@ -3,6 +3,8 @@
 
 #ifdef CONFIG_NEED_MULTIPLE_NODES
 
+#include <linux/cpumask.h>
+
 extern struct pglist_data *node_data[];
 
 #define NODE_DATA(nid)		(node_data[nid])

^ permalink raw reply related	[flat|nested] 359+ messages in thread

* Re: [Announce] 2.6.29-rc8-rt2
@ 2009-03-20 19:25                   ` Ingo Molnar
  0 siblings, 0 replies; 359+ messages in thread
From: Ingo Molnar @ 2009-03-20 19:25 UTC (permalink / raw)
  To: Will Schmidt
  Cc: Thomas Gleixner, LKML, rt-users, Steven Rostedt, Peter Zijlstra,
	Carsten Emde, Clark Williams, Frank Rowand


* Will Schmidt <will_schmidt@vnet.ibm.com> wrote:

> On Fri, 2009-03-20 at 18:45 +0100, Thomas Gleixner wrote:
> > We are pleased to announce the next update to our new preempt-rt
> > series.
> >     
> >      - resurrected ARM and PowerPC support
> >      - tracing fixes for ARM (Uwe Kleine-Koenig)
> > 
> > The support for ARM/PowerPC has only been lightly tested. It might
> > crash and burn your system, make your hair curl, frigthen your cat and
> > give you sleepless nights. You have been warned !
> 
> During a build attempt on powerpc, I am seeing:
> 
> In file included from include/linux/mmzone.h:776,
>                  from include/linux/gfp.h:5,
>                  from include/linux/slab.h:13,
>                  from include/linux/percpu.h:6,
>                  from include/linux/rcupdate.h:40,
>                  from include/linux/rculist.h:11,
>                  from include/linux/dcache.h:7,
>                  from include/linux/fs.h:299,
>                  from init/do_mounts_rd.c:4:
> /root/linux-2.6.29-rc8/arch/powerpc/include/asm/mmzone.h:32: error:
> expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before
> ‘numa_cpumask_lookup_table’
> In file included from include/linux/topology.h:35,
>                  from include/linux/gfp.h:8,
>                  from include/linux/slab.h:13,
>                  from include/linux/percpu.h:6,
>                  from include/linux/rcupdate.h:40,
>                  from include/linux/rculist.h:11,
>                  from include/linux/dcache.h:7,
>                  from include/linux/fs.h:299,
>                  from init/do_mounts_rd.c:4:
> /root/linux-2.6.29-rc8/arch/powerpc/include/asm/topology.h: In function
> ‘node_to_cpumask’:
> /root/linux-2.6.29-rc8/arch/powerpc/include/asm/topology.h:22: error:
> ‘numa_cpumask_lookup_table’ undeclared (first use in this function)
> /root/linux-2.6.29-rc8/arch/powerpc/include/asm/topology.h:22: error:
> (Each undeclared identifier is reported only once
> /root/linux-2.6.29-rc8/arch/powerpc/include/asm/topology.h:22: error:
> for each function it appears in.)
> /root/linux-2.6.29-rc8/arch/powerpc/include/asm/topology.h: In function
> ‘node_to_first_cpu’:
> /root/linux-2.6.29-rc8/arch/powerpc/include/asm/topology.h:29: error:
> ‘numa_cpumask_lookup_table’ undeclared (first use in this function)
> make[1]: *** [init/do_mounts_rd.o] Error 1
> make[1]: *** Waiting for unfinished jobs....
> 
> 
> 
> I have locally fixed by adding an include just above the cpumask_t
> reference.  The include may belong elsewhere, but in case I got it
> right,.. :-)
> 
> Signed-Off-By:  Will Schmidt <will_schmidt@vnet.ibm.com>

you got it right :-) The full fix (the bug also affects sparc) is 
already queued up - see it below.

	Ingo

-------------->
From 0c7e5b187fc599a40c1e6392926424d26cd0cf41 Mon Sep 17 00:00:00 2001
From: Stephen Rothwell <sfr@canb.auug.org.au>
Date: Thu, 19 Mar 2009 22:03:22 +1100
Subject: [PATCH] numa, cpumask: move numa_node_id default implementation to topology.h, fix

Impact: build fix for powerpc and sparc

Today's linux-next build (powerpc allyesconfig) failed like this:

> In file included from include/linux/mmzone.h:776,
>                  from include/linux/gfp.h:5,
>                  from include/linux/kmod.h:23,
>                  from include/linux/module.h:14,
>                  from init/version.c:11:
> arch/powerpc/include/asm/mmzone.h:32: error: expected '=', ',', ';', 'asm' or '__attribute__' before 'numa_cpumask_lookup_table'

Caused by commit 082edb7bf443eb8eda15b482d16ad9dd8137ad24 ("numa,
cpumask: move numa_node_id default implementation to topology.h") from
the cpus4096 tree which removed the include of linux/topology.h from
linux/mmzone.h.

Same for sparc64 defconfig.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Acked-b: Rusty Russell <rusty@rustcorp.com.au>
Cc: ppc-dev <linuxppc-dev@ozlabs.org>
LKML-Reference: <20090319220322.3baa4613.sfr@canb.auug.org.au>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/powerpc/include/asm/mmzone.h |    1 +
 arch/sparc/include/asm/mmzone.h   |    2 ++
 2 files changed, 3 insertions(+), 0 deletions(-)

diff --git a/arch/powerpc/include/asm/mmzone.h b/arch/powerpc/include/asm/mmzone.h
index 19f299b..35acac9 100644
--- a/arch/powerpc/include/asm/mmzone.h
+++ b/arch/powerpc/include/asm/mmzone.h
@@ -8,6 +8,7 @@
 #define _ASM_MMZONE_H_
 #ifdef __KERNEL__
 
+#include <linux/cpumask.h>
 
 /*
  * generic non-linear memory support:
diff --git a/arch/sparc/include/asm/mmzone.h b/arch/sparc/include/asm/mmzone.h
index ebf5986..e8c6487 100644
--- a/arch/sparc/include/asm/mmzone.h
+++ b/arch/sparc/include/asm/mmzone.h
@@ -3,6 +3,8 @@
 
 #ifdef CONFIG_NEED_MULTIPLE_NODES
 
+#include <linux/cpumask.h>
+
 extern struct pglist_data *node_data[];
 
 #define NODE_DATA(nid)		(node_data[nid])
--
To unsubscribe from this list: send the line "unsubscribe linux-rt-users" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

^ permalink raw reply related	[flat|nested] 359+ messages in thread

* Re: [Announce] 2.6.29-rc78rt1
  2009-03-20 15:48               ` Thomas Gleixner
@ 2009-03-20 21:55                 ` Frank Rowand
  0 siblings, 0 replies; 359+ messages in thread
From: Frank Rowand @ 2009-03-20 21:55 UTC (permalink / raw)
  To: Thomas Gleixner; +Cc: rt-users

Thomas Gleixner wrote:
> On Thu, 19 Mar 2009, Frank Rowand wrote:
>>>    - lots of tracer updates from -tip (check the tip git logs)
>> I have been trying to reverse engineer which git commits
>> comprise origin.patch, but my git-foo is not up to the
>> task.  For any single file in origin.patch, I can work
>> backwards to find the git commit associated with it, but I
>> don't know how to easily create a list of all of the git commits
>> that are associated with origin.patch.  Do you have any quick
>> hints that would assist me in my quest?
> 
>   git log v.2.6.29-rc8..
> 
> I'm going to add a log to the broken out tarball next time.
> 

Thanks for the info!  I'm getting closer, but I'm still missing
something or doing something wrong.

The git tree I'm using (from .git/config):
[remote "origin"]
        url = git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip.git

On branch "master".

I tried to re-create origin.patch by:

  git format-patch --abbrev=7 --stdout -p v2.6.29-rc8.. >MY_ORIGIN.PATCH

but got different results than what is in origin.patch.bz.
MY_ORIGIN.PATCH has the same source changes as origin.patch.bz
(at least for the small sample of files that I checked), but
sometimes split across several patches instead of a single patch.

Using Documentation/x86/boot.txt as an example of the difference:

  patch-2.6.29-rc8-rt1-broken-out.tar.bz2 origin.patch.bz shows:

    diff --git a/Documentation/x86/boot.txt b/Documentation/x86/boot.txt
    index 7b4596a..e020366 100644

  But the same changes in the git tree are split across two git commits
  (so I get two patches in my MY_ORIGIN.PATCH instead of the single
  patch in origin.patch.bz):

    $ git log v2.6.29-rc8.. -- Documentation/x86/boot.txt | grep commit
    commit 8b0e5860cb099d7958d13b00ffbc35ad02735700
    commit e56d0cfe7790fd3218ae4f6aae1335547fea8763
    commit ee287587dafd77fd211e50637561224605c214b4

    (8b0e5860 is a merge of branches)

    $ git format-patch --abbrev=7 --stdout -p e56d0cfe^1..e56d0cfe \
      | grep -E "(^diff)|(^index)"
    diff --git a/Documentation/x86/boot.txt b/Documentation/x86/boot.txt
    index 7b4596a..1229969 100644

    $ git format-patch --abbrev=7 --stdout -p ee287587^1..ee287587 \
      | grep -E "(^diff)|(^index)"
    diff --git a/Documentation/x86/boot.txt b/Documentation/x86/boot.txt
    index fcdc62b..9ac70ff 100644

  So I'm obviously in the wrong place or using the wrong technique
  to be able to re-create origin.patch.bz from the git repository.
  Any more quick hints to help me out here?

  Also, "git log v2.6.29-rc8.." presumes that HEAD in my repository is
  the same as when the RT preempt patch was created.  Is there a tag
  or a git id or some other way to identify that point?

Thanks!

Frank Rowand
Sony Corporation of America


^ permalink raw reply	[flat|nested] 359+ messages in thread

* [Announce] 2.6.29-rc8-rt3
  2009-03-20 17:45             ` [Announce] 2.6.29-rc8-rt2 Thomas Gleixner
  2009-03-20 19:19                 ` Will Schmidt
@ 2009-03-23 16:26               ` Thomas Gleixner
  2009-03-24 11:04                 ` Frederic Weisbecker
  2009-03-25 20:59                 ` [Announce] 2.6.29-rt1 Thomas Gleixner
  1 sibling, 2 replies; 359+ messages in thread
From: Thomas Gleixner @ 2009-03-23 16:26 UTC (permalink / raw)
  To: LKML
  Cc: rt-users, Ingo Molnar, Steven Rostedt, Peter Zijlstra,
	Carsten Emde, Clark Williams, Frank Rowand

We are pleased to announce the next update to our new preempt-rt
series.

    - fix a x86 32bit PAE pagetable corruption caused by a hard to
      trigger race.

    - update to latest linus and tip

Download locations:

    http://rt.et.redhat.com/download/
    http://www.kernel.org/pub/linux/kernel/projects/rt/
 
Information on the RT patch can be found at:

    http://rt.wiki.kernel.org/index.php/Main_Page

to build the 2.6.29-rc8-rt3 tree, the following patches should be
applied:

    http://www.kernel.org/pub/linux/kernel/v2.6/testing/linux-2.6.29-rc8.tar.bz2
    http://www.kernel.org/pub/linux/kernel/projects/rt/patch-2.6.29-rc8-rt3.bz2

The broken out patches are also available at the same download
locations.

Enjoy !

       tglx

^ permalink raw reply	[flat|nested] 359+ messages in thread

* Re: [Announce] 2.6.29-rc8-rt3
  2009-03-23 16:26               ` [Announce] 2.6.29-rc8-rt3 Thomas Gleixner
@ 2009-03-24 11:04                 ` Frederic Weisbecker
  2009-03-24 21:07                     ` Uwe Kleine-König
  2009-03-25 20:59                 ` [Announce] 2.6.29-rt1 Thomas Gleixner
  1 sibling, 1 reply; 359+ messages in thread
From: Frederic Weisbecker @ 2009-03-24 11:04 UTC (permalink / raw)
  To: Thomas Gleixner
  Cc: LKML, rt-users, Ingo Molnar, Steven Rostedt, Peter Zijlstra,
	Carsten Emde, Clark Williams, Frank Rowand

On Mon, Mar 23, 2009 at 05:26:52PM +0100, Thomas Gleixner wrote:
> We are pleased to announce the next update to our new preempt-rt
> series.
> 
>     - fix a x86 32bit PAE pagetable corruption caused by a hard to
>       trigger race.
> 
>     - update to latest linus and tip
> 
> Download locations:
> 
>     http://rt.et.redhat.com/download/
>     http://www.kernel.org/pub/linux/kernel/projects/rt/
>  
> Information on the RT patch can be found at:
> 
>     http://rt.wiki.kernel.org/index.php/Main_Page
> 
> to build the 2.6.29-rc8-rt3 tree, the following patches should be
> applied:
> 
>     http://www.kernel.org/pub/linux/kernel/v2.6/testing/linux-2.6.29-rc8.tar.bz2
>     http://www.kernel.org/pub/linux/kernel/projects/rt/patch-2.6.29-rc8-rt3.bz2


Hi,

It doesn't seem to be available (404).
But I can see a 2.6.29-rc8-rt4.bz2 downloadable.

Thanks.
 

> The broken out patches are also available at the same download
> locations.
> 
> Enjoy !
> 
>        tglx
> --
> To unsubscribe from this list: send the line "unsubscribe linux-rt-users" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html


^ permalink raw reply	[flat|nested] 359+ messages in thread

* Re: [Announce] 2.6.29-rc8-rt3
  2009-03-24 11:04                 ` Frederic Weisbecker
@ 2009-03-24 21:07                     ` Uwe Kleine-König
  0 siblings, 0 replies; 359+ messages in thread
From: Uwe Kleine-König @ 2009-03-24 21:07 UTC (permalink / raw)
  To: Frederic Weisbecker
  Cc: Thomas Gleixner, LKML, rt-users, Ingo Molnar, Steven Rostedt,
	Peter Zijlstra, Carsten Emde, Clark Williams, Frank Rowand

Hi,

> >     http://www.kernel.org/pub/linux/kernel/v2.6/testing/linux-2.6.29-rc8.tar.bz2
> >     http://www.kernel.org/pub/linux/kernel/projects/rt/patch-2.6.29-rc8-rt3.bz2
> 
> 
> Hi,
> 
> It doesn't seem to be available (404).
> But I can see a 2.6.29-rc8-rt4.bz2 downloadable.
> 
> Thanks.
This is a channel log from #linux-rt

19:57 < clark|w> tglx, just how small was the -rt3 window (which I hit btw)?
19:58 < tglx> you mean how long -rt3 was up on the web ?
19:58 < clark|w> yeah
19:58 < tglx> half an hour or so
19:59 < clark|w> because I got it, built/booted it (64-bit) and was running it 
                 up til thismorning when I saw that you'd released -rt4 :)
19:59 < tglx> 64bit was fine
19:59 < tglx> I fixed a 32bit PAE bug in -rt2 and when I pushed out -rt3 I did 
              not notice that half of the fix was lost
20:00 < tglx> so I zapped it and pushed out rt4
20:00 < clark|w> cool
20:00 < clark|w> good think I'm 64bit clean :)
20:00 < tglx> but I was too tired to send out another mail

Just FYI
Uwe

-- 
Pengutronix e.K.                              | Uwe Kleine-König            |
Industrial Linux Solutions                    | http://www.pengutronix.de/  |

^ permalink raw reply	[flat|nested] 359+ messages in thread

* Re: [Announce] 2.6.29-rc8-rt3
@ 2009-03-24 21:07                     ` Uwe Kleine-König
  0 siblings, 0 replies; 359+ messages in thread
From: Uwe Kleine-König @ 2009-03-24 21:07 UTC (permalink / raw)
  To: Frederic Weisbecker
  Cc: Thomas Gleixner, LKML, rt-users, Ingo Molnar, Steven Rostedt,
	Peter Zijlstra, Carsten Emde, Clark Williams, Frank Rowand

Hi,

> >     http://www.kernel.org/pub/linux/kernel/v2.6/testing/linux-2.6.29-rc8.tar.bz2
> >     http://www.kernel.org/pub/linux/kernel/projects/rt/patch-2.6.29-rc8-rt3.bz2
> 
> 
> Hi,
> 
> It doesn't seem to be available (404).
> But I can see a 2.6.29-rc8-rt4.bz2 downloadable.
> 
> Thanks.
This is a channel log from #linux-rt

19:57 < clark|w> tglx, just how small was the -rt3 window (which I hit btw)?
19:58 < tglx> you mean how long -rt3 was up on the web ?
19:58 < clark|w> yeah
19:58 < tglx> half an hour or so
19:59 < clark|w> because I got it, built/booted it (64-bit) and was running it 
                 up til thismorning when I saw that you'd released -rt4 :)
19:59 < tglx> 64bit was fine
19:59 < tglx> I fixed a 32bit PAE bug in -rt2 and when I pushed out -rt3 I did 
              not notice that half of the fix was lost
20:00 < tglx> so I zapped it and pushed out rt4
20:00 < clark|w> cool
20:00 < clark|w> good think I'm 64bit clean :)
20:00 < tglx> but I was too tired to send out another mail

Just FYI
Uwe

-- 
Pengutronix e.K.                              | Uwe Kleine-König            |
Industrial Linux Solutions                    | http://www.pengutronix.de/  |
--
To unsubscribe from this list: send the line "unsubscribe linux-rt-users" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

^ permalink raw reply	[flat|nested] 359+ messages in thread

* [Announce] 2.6.29-rt1
  2009-03-23 16:26               ` [Announce] 2.6.29-rc8-rt3 Thomas Gleixner
  2009-03-24 11:04                 ` Frederic Weisbecker
@ 2009-03-25 20:59                 ` Thomas Gleixner
  2009-03-25 21:05                   ` Jaswinder Singh Rajput
                                     ` (2 more replies)
  1 sibling, 3 replies; 359+ messages in thread
From: Thomas Gleixner @ 2009-03-25 20:59 UTC (permalink / raw)
  To: LKML
  Cc: rt-users, Ingo Molnar, Steven Rostedt, Peter Zijlstra,
	Carsten Emde, Clark Williams, Frank Rowand

We are pleased to announce the next update to our new preempt-rt
series.
 
     - port forward to 2.6.29 final

Download locations:

    http://rt.et.redhat.com/download/
    http://www.kernel.org/pub/linux/kernel/projects/rt/
 
Information on the RT patch can be found at:

    http://rt.wiki.kernel.org/index.php/Main_Page

to build the 2.6.29-rt1 tree, the following patches should be
applied:

    http://www.kernel.org/pub/linux/kernel/v2.6/testing/linux-2.6.29.tar.bz2
    http://www.kernel.org/pub/linux/kernel/projects/rt/patch-2.6.29-rt1.bz2

The broken out patches are also available at the same download
locations.

Enjoy !

       tglx


^ permalink raw reply	[flat|nested] 359+ messages in thread

* Re: [Announce] 2.6.29-rt1
  2009-03-25 20:59                 ` [Announce] 2.6.29-rt1 Thomas Gleixner
@ 2009-03-25 21:05                   ` Jaswinder Singh Rajput
  2009-03-25 21:09                     ` Thomas Gleixner
  2009-03-25 21:16                   ` Grammostola Rosea
  2009-04-02  0:17                   ` [Announce] 2.6.29-rt2 Thomas Gleixner
  2 siblings, 1 reply; 359+ messages in thread
From: Jaswinder Singh Rajput @ 2009-03-25 21:05 UTC (permalink / raw)
  To: Thomas Gleixner
  Cc: LKML, rt-users, Ingo Molnar, Steven Rostedt, Peter Zijlstra,
	Carsten Emde, Clark Williams, Frank Rowand

On Wed, 2009-03-25 at 21:59 +0100, Thomas Gleixner wrote:
> We are pleased to announce the next update to our new preempt-rt
> series.
>  
>      - port forward to 2.6.29 final
> 
> Download locations:
> 
>     http://rt.et.redhat.com/download/
>     http://www.kernel.org/pub/linux/kernel/projects/rt/
>  
> Information on the RT patch can be found at:
> 
>     http://rt.wiki.kernel.org/index.php/Main_Page
> 
> to build the 2.6.29-rt1 tree, the following patches should be
> applied:
> 
>     http://www.kernel.org/pub/linux/kernel/v2.6/testing/linux-2.6.29.tar.bz2

Is this valid ?

--
JSR


^ permalink raw reply	[flat|nested] 359+ messages in thread

* Re: [Announce] 2.6.29-rt1
  2009-03-25 21:05                   ` Jaswinder Singh Rajput
@ 2009-03-25 21:09                     ` Thomas Gleixner
  2009-03-26  7:52                         ` GeunSik Lim
  2009-03-26  8:02                         ` GeunSik Lim
  0 siblings, 2 replies; 359+ messages in thread
From: Thomas Gleixner @ 2009-03-25 21:09 UTC (permalink / raw)
  To: Jaswinder Singh Rajput
  Cc: LKML, rt-users, Ingo Molnar, Steven Rostedt, Peter Zijlstra,
	Carsten Emde, Clark Williams, Frank Rowand

On Thu, 26 Mar 2009, Jaswinder Singh Rajput wrote:

> On Wed, 2009-03-25 at 21:59 +0100, Thomas Gleixner wrote:
> > We are pleased to announce the next update to our new preempt-rt
> > series.
> >  
> >      - port forward to 2.6.29 final
> > 
> > Download locations:
> > 
> >     http://rt.et.redhat.com/download/
> >     http://www.kernel.org/pub/linux/kernel/projects/rt/
> >  
> > Information on the RT patch can be found at:
> > 
> >     http://rt.wiki.kernel.org/index.php/Main_Page
> > 
> > to build the 2.6.29-rt1 tree, the following patches should be
> > applied:
> > 
> >     http://www.kernel.org/pub/linux/kernel/v2.6/testing/linux-2.6.29.tar.bz2
> 
> Is this valid ?

If we remove the testing/ it should work better :)

   tglx

^ permalink raw reply	[flat|nested] 359+ messages in thread

* Re: [Announce] 2.6.29-rt1
  2009-03-25 20:59                 ` [Announce] 2.6.29-rt1 Thomas Gleixner
  2009-03-25 21:05                   ` Jaswinder Singh Rajput
@ 2009-03-25 21:16                   ` Grammostola Rosea
  2009-04-02  0:17                   ` [Announce] 2.6.29-rt2 Thomas Gleixner
  2 siblings, 0 replies; 359+ messages in thread
From: Grammostola Rosea @ 2009-03-25 21:16 UTC (permalink / raw)
  Cc: rt-users, Steven Rostedt, Peter Zijlstra, Carsten Emde,
	Clark Williams, Frank Rowand

Thomas Gleixner wrote:
> We are pleased to announce the next update to our new preempt-rt
> series.
>  
> Enjoy !
>
>        tglx

Thankx!

Is there also an announce mailinglist? Would be good imho. So people can 
subscribe.

\r

^ permalink raw reply	[flat|nested] 359+ messages in thread

* Re: [Announce] 2.6.29-rt1
  2009-03-25 21:09                     ` Thomas Gleixner
@ 2009-03-26  7:52                         ` GeunSik Lim
  2009-03-26  8:02                         ` GeunSik Lim
  1 sibling, 0 replies; 359+ messages in thread
From: GeunSik Lim @ 2009-03-26  7:52 UTC (permalink / raw)
  To: Thomas Gleixner
  Cc: Jaswinder Singh Rajput, LKML, rt-users, Ingo Molnar,
	Steven Rostedt, Peter Zijlstra, Carsten Emde, Clark Williams,
	Frank Rowand

Hi,

I understood statement that Thosmas explained about invalid access of
2.6.29-rt1 soruces.
In general,
We remeber rc directory (./v2.6/testing/ and release directory
(./v2.6/) certainly.

Release Version is located in http://www.kernel.org/pub/linux/kernel/v2.6/ site.
RC      Version is located in
http://www.kernel.org/pub/linux/kernel/v2.6/testing/ site.

I summarized quick howto per notice of "2.6.* rt patch" file.
fc9#> wget http://www.kernel.org/pub/linux/kernel/v2.6/linux-2.6.29.tar.bz2
  (If linux version is RC[release candidate] version,
 use "wget http://www.kernel.org/pub/linux/kernel/v2.6/testing/***" command.)
fc9#> wget http://www.kernel.org/pub/linux/kernel/projects/rt/patch-2.6.29-rt1.bz2
fc9#> tar xjf ./linux-2.6.29.tar.bz2
fc9#> tar xvjf ./patch-2.6.29-rt1-broken-out.tar.bz2
fc9#> cd ./linux-2.6.29
fc9#> for i in `cat ../patches/series | grep patch | grep -v "#"  `;do
echo "+++ patching $i"; patch -p1 <

../patches/$i;done
fc9#> cp ./arch/x86/configs/i386_defconfig ./.config
fc9#> make menuconfig
        ..... Below Omission .....
  	

Regards,
GeunSik Lim


2009/3/26 Thomas Gleixner <tglx@linutronix.de>:
> On Thu, 26 Mar 2009, Jaswinder Singh Rajput wrote:
>
>> On Wed, 2009-03-25 at 21:59 +0100, Thomas Gleixner wrote:
>> > We are pleased to announce the next update to our new preempt-rt
>> > series.
>> >
>> >      - port forward to 2.6.29 final
>> >
>> > Download locations:
>> >
>> >     http://rt.et.redhat.com/download/
>> >     http://www.kernel.org/pub/linux/kernel/projects/rt/
>> >
>> > Information on the RT patch can be found at:
>> >
>> >     http://rt.wiki.kernel.org/index.php/Main_Page
>> >
>> > to build the 2.6.29-rt1 tree, the following patches should be
>> > applied:
>> >
>> >     http://www.kernel.org/pub/linux/kernel/v2.6/testing/linux-2.6.29.tar.bz2
>>
>> Is this valid ?
>
> If we remove the testing/ it should work better :)
>
>   tglx
> --
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at  http://www.tux.org/lkml/
>
--
Regards,
GeunSik Lim
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

^ permalink raw reply	[flat|nested] 359+ messages in thread

* Re: [Announce] 2.6.29-rt1
@ 2009-03-26  7:52                         ` GeunSik Lim
  0 siblings, 0 replies; 359+ messages in thread
From: GeunSik Lim @ 2009-03-26  7:52 UTC (permalink / raw)
  To: Thomas Gleixner
  Cc: Jaswinder Singh Rajput, LKML, rt-users, Ingo Molnar,
	Steven Rostedt, Peter Zijlstra, Carsten Emde, Clark Williams,
	Frank Rowand

Hi,

I understood statement that Thosmas explained about invalid access of
2.6.29-rt1 soruces.
In general,
We remeber rc directory (./v2.6/testing/ and release directory
(./v2.6/) certainly.

Release Version is located in http://www.kernel.org/pub/linux/kernel/v2.6/ site.
RC      Version is located in
http://www.kernel.org/pub/linux/kernel/v2.6/testing/ site.

I summarized quick howto per notice of "2.6.* rt patch" file.
fc9#> wget http://www.kernel.org/pub/linux/kernel/v2.6/linux-2.6.29.tar.bz2
  (If linux version is RC[release candidate] version,
 use "wget http://www.kernel.org/pub/linux/kernel/v2.6/testing/***" command.)
fc9#> wget http://www.kernel.org/pub/linux/kernel/projects/rt/patch-2.6.29-rt1.bz2
fc9#> tar xjf ./linux-2.6.29.tar.bz2
fc9#> tar xvjf ./patch-2.6.29-rt1-broken-out.tar.bz2
fc9#> cd ./linux-2.6.29
fc9#> for i in `cat ../patches/series | grep patch | grep -v "#"  `;do
echo "+++ patching $i"; patch -p1 <

../patches/$i;done
fc9#> cp ./arch/x86/configs/i386_defconfig ./.config
fc9#> make menuconfig
        ..... Below Omission .....
  	

Regards,
GeunSik Lim


2009/3/26 Thomas Gleixner <tglx@linutronix.de>:
> On Thu, 26 Mar 2009, Jaswinder Singh Rajput wrote:
>
>> On Wed, 2009-03-25 at 21:59 +0100, Thomas Gleixner wrote:
>> > We are pleased to announce the next update to our new preempt-rt
>> > series.
>> >
>> >      - port forward to 2.6.29 final
>> >
>> > Download locations:
>> >
>> >     http://rt.et.redhat.com/download/
>> >     http://www.kernel.org/pub/linux/kernel/projects/rt/
>> >
>> > Information on the RT patch can be found at:
>> >
>> >     http://rt.wiki.kernel.org/index.php/Main_Page
>> >
>> > to build the 2.6.29-rt1 tree, the following patches should be
>> > applied:
>> >
>> >     http://www.kernel.org/pub/linux/kernel/v2.6/testing/linux-2.6.29.tar.bz2
>>
>> Is this valid ?
>
> If we remove the testing/ it should work better :)
>
>   tglx
> --
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at  http://www.tux.org/lkml/
>
--
Regards,
GeunSik Lim
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/
--
To unsubscribe from this list: send the line "unsubscribe linux-rt-users" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

^ permalink raw reply	[flat|nested] 359+ messages in thread

* Re: [Announce] 2.6.29-rt1
  2009-03-25 21:09                     ` Thomas Gleixner
@ 2009-03-26  8:02                         ` GeunSik Lim
  2009-03-26  8:02                         ` GeunSik Lim
  1 sibling, 0 replies; 359+ messages in thread
From: GeunSik Lim @ 2009-03-26  8:02 UTC (permalink / raw)
  To: Thomas Gleixner
  Cc: Jaswinder Singh Rajput, LKML, rt-users, Ingo Molnar,
	Steven Rostedt, Peter Zijlstra, Carsten Emde, Clark Williams,
	Frank Rowand

Hi,

I understood statement that Thosmas explained about invalid access of
2.6.29-rt1 soruces.
In general,
We remeber rc directory (./v2.6/testing/ and release directory
(./v2.6/) certainly.

Release Version is located in http://www.kernel.org/pub/linux/kernel/v2.6/ site.
RC      Version is located in
http://www.kernel.org/pub/linux/kernel/v2.6/testing/ site.

I summarized quick howto per notice of "2.6.* rt patch" file.
fc9#> wget http://www.kernel.org/pub/linux/kernel/v2.6/linux-2.6.29.tar.bz2
  (If linux version is RC[release candidate] version,
 use "wget http://www.kernel.org/pub/linux/kernel/v2.6/testing/***" command.)
fc9#> wget http://www.kernel.org/pub/linux/kernel/projects/rt/patch-2.6.29-rt1.bz2
fc9#> tar xjf ./linux-2.6.29.tar.bz2
fc9#> tar xvjf ./patch-2.6.29-rt1-broken-out.tar.bz2
fc9#> cd ./linux-2.6.29
fc9#> for i in `cat ../patches/series | grep patch | grep -v "#"  `;do
echo "+++ patching $i"; patch -p1 <

../patches/$i;done
fc9#> cp ./arch/x86/configs/i386_defconfig ./.config
fc9#> make menuconfig
        ..... Below Omission .....
  	

Regards,
GeunSik Lim


2009/3/26 Thomas Gleixner <tglx@linutronix.de>:
> On Thu, 26 Mar 2009, Jaswinder Singh Rajput wrote:
>
>> On Wed, 2009-03-25 at 21:59 +0100, Thomas Gleixner wrote:
>> > We are pleased to announce the next update to our new preempt-rt
>> > series.
>> >
>> >      - port forward to 2.6.29 final
>> >
>> > Download locations:
>> >
>> >     http://rt.et.redhat.com/download/
>> >     http://www.kernel.org/pub/linux/kernel/projects/rt/
>> >
>> > Information on the RT patch can be found at:
>> >
>> >     http://rt.wiki.kernel.org/index.php/Main_Page
>> >
>> > to build the 2.6.29-rt1 tree, the following patches should be
>> > applied:
>> >
>> >     http://www.kernel.org/pub/linux/kernel/v2.6/testing/linux-2.6.29.tar.bz2
>>
>> Is this valid ?
>
> If we remove the testing/ it should work better :)
>
>   tglx
> --
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at  http://www.tux.org/lkml/
>

^ permalink raw reply	[flat|nested] 359+ messages in thread

* Re: [Announce] 2.6.29-rt1
@ 2009-03-26  8:02                         ` GeunSik Lim
  0 siblings, 0 replies; 359+ messages in thread
From: GeunSik Lim @ 2009-03-26  8:02 UTC (permalink / raw)
  To: Thomas Gleixner
  Cc: Jaswinder Singh Rajput, LKML, rt-users, Ingo Molnar,
	Steven Rostedt, Peter Zijlstra, Carsten Emde, Clark Williams,
	Frank Rowand

Hi,

I understood statement that Thosmas explained about invalid access of
2.6.29-rt1 soruces.
In general,
We remeber rc directory (./v2.6/testing/ and release directory
(./v2.6/) certainly.

Release Version is located in http://www.kernel.org/pub/linux/kernel/v2.6/ site.
RC      Version is located in
http://www.kernel.org/pub/linux/kernel/v2.6/testing/ site.

I summarized quick howto per notice of "2.6.* rt patch" file.
fc9#> wget http://www.kernel.org/pub/linux/kernel/v2.6/linux-2.6.29.tar.bz2
  (If linux version is RC[release candidate] version,
 use "wget http://www.kernel.org/pub/linux/kernel/v2.6/testing/***" command.)
fc9#> wget http://www.kernel.org/pub/linux/kernel/projects/rt/patch-2.6.29-rt1.bz2
fc9#> tar xjf ./linux-2.6.29.tar.bz2
fc9#> tar xvjf ./patch-2.6.29-rt1-broken-out.tar.bz2
fc9#> cd ./linux-2.6.29
fc9#> for i in `cat ../patches/series | grep patch | grep -v "#"  `;do
echo "+++ patching $i"; patch -p1 <

../patches/$i;done
fc9#> cp ./arch/x86/configs/i386_defconfig ./.config
fc9#> make menuconfig
        ..... Below Omission .....
  	

Regards,
GeunSik Lim


2009/3/26 Thomas Gleixner <tglx@linutronix.de>:
> On Thu, 26 Mar 2009, Jaswinder Singh Rajput wrote:
>
>> On Wed, 2009-03-25 at 21:59 +0100, Thomas Gleixner wrote:
>> > We are pleased to announce the next update to our new preempt-rt
>> > series.
>> >
>> >      - port forward to 2.6.29 final
>> >
>> > Download locations:
>> >
>> >     http://rt.et.redhat.com/download/
>> >     http://www.kernel.org/pub/linux/kernel/projects/rt/
>> >
>> > Information on the RT patch can be found at:
>> >
>> >     http://rt.wiki.kernel.org/index.php/Main_Page
>> >
>> > to build the 2.6.29-rt1 tree, the following patches should be
>> > applied:
>> >
>> >     http://www.kernel.org/pub/linux/kernel/v2.6/testing/linux-2.6.29.tar.bz2
>>
>> Is this valid ?
>
> If we remove the testing/ it should work better :)
>
>   tglx
> --
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at  http://www.tux.org/lkml/
>
--
To unsubscribe from this list: send the line "unsubscribe linux-rt-users" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

^ permalink raw reply	[flat|nested] 359+ messages in thread

* [Announce] 2.6.29-rt2
  2009-03-25 20:59                 ` [Announce] 2.6.29-rt1 Thomas Gleixner
  2009-03-25 21:05                   ` Jaswinder Singh Rajput
  2009-03-25 21:16                   ` Grammostola Rosea
@ 2009-04-02  0:17                   ` Thomas Gleixner
  2009-04-02 16:02                     ` Will Schmidt
  2009-04-03 17:21                     ` [Announce] 2.6.29.1-rt4 Thomas Gleixner
  2 siblings, 2 replies; 359+ messages in thread
From: Thomas Gleixner @ 2009-04-02  0:17 UTC (permalink / raw)
  To: LKML
  Cc: rt-users, Ingo Molnar, Steven Rostedt, Peter Zijlstra,
	Carsten Emde, Clark Williams, Frank Rowand, Robin Gareus,
	Gregory Haskins, Philippe Reynes, Fernando Lopez-Lezcano,
	Will Schmidt

We are pleased to announce the next update to our new preempt-rt
series.
 
      - fix a fork/exit bug in the signal per task cache (/me puts on
        a huge brown paper bag - Thanks to Phillipe Reynes and Will
        Schmidt for reporting and testing)

      - fix a group scheduling migration accounting bug (decoded with
        and fixed by Peter Zijlstra - reported by Robin Gareus)

      - tlb gather rework by Peter Zijlstra - Thanks Peter !

      - the usual fixlets

The tlb rework might be incomplete on some of the uncountable
incarnations of PowerPC and ARM platforms, so look out for wreckage
and keep the usual tools (fire-extinguishers, brooms, buckets etc.)
handy.

Download locations:

    http://rt.et.redhat.com/download/
    http://www.kernel.org/pub/linux/kernel/projects/rt/
 
Information on the RT patch can be found at:

    http://rt.wiki.kernel.org/index.php/Main_Page

to build the 2.6.29-rt2 tree, the following patches should be
applied:

    http://www.kernel.org/pub/linux/kernel/v2.6/linux-2.6.29.tar.bz2
    http://www.kernel.org/pub/linux/kernel/projects/rt/patch-2.6.29-rt2.bz2

The broken out patches are also available at the same download
locations.

Enjoy !

       tglx


^ permalink raw reply	[flat|nested] 359+ messages in thread

* Re: [Announce] 2.6.29-rt2
  2009-04-02  0:17                   ` [Announce] 2.6.29-rt2 Thomas Gleixner
@ 2009-04-02 16:02                     ` Will Schmidt
  2009-04-02 16:45                       ` Thomas Gleixner
  2009-04-03 17:21                     ` [Announce] 2.6.29.1-rt4 Thomas Gleixner
  1 sibling, 1 reply; 359+ messages in thread
From: Will Schmidt @ 2009-04-02 16:02 UTC (permalink / raw)
  To: Thomas Gleixner
  Cc: LKML, rt-users, Ingo Molnar, Steven Rostedt, Peter Zijlstra,
	Carsten Emde, Clark Williams, Frank Rowand, Robin Gareus,
	Gregory Haskins, Philippe Reynes, Fernando Lopez-Lezcano

On Thu, 2009-04-02 at 02:17 +0200, Thomas Gleixner wrote:
> We are pleased to announce the next update to our new preempt-rt
> series.
> 
>       - fix a fork/exit bug in the signal per task cache (/me puts on
>         a huge brown paper bag - Thanks to Phillipe Reynes and Will
>         Schmidt for reporting and testing)
> 
>       - fix a group scheduling migration accounting bug (decoded with
>         and fixed by Peter Zijlstra - reported by Robin Gareus)
> 
>       - tlb gather rework by Peter Zijlstra - Thanks Peter !
> 
>       - the usual fixlets
> 
> The tlb rework might be incomplete on some of the uncountable
> incarnations of PowerPC and ARM platforms, so look out for wreckage
> and keep the usual tools (fire-extinguishers, brooms, buckets etc.)
> handy.

I can confirm that the tlb rework does appear to be missing some parts
for Power.  (Using 2.6.29-rt3 on pseries ppc64)

arch/powerpc/kernel/built-in.o:(.toc1+0x4d0): undefined reference to
`per_cpu__ppc64_tlb_batch'
<...>
mm/built-in.o:(.toc1+0xed0): more undefined references to
`per_cpu__ppc64_tlb_batch' follow

Not clear to me if this is just missing a "DEFINE_PER_CPU_LOCKED" to
replace the removed "DEFINE_PER_CPU", (similar to the prior RT patches),
or if the tlb rework is more involved.   So, I will patiently remain
tuned in.  :-)

Thanks, 
-Will



^ permalink raw reply	[flat|nested] 359+ messages in thread

* Re: [Announce] 2.6.29-rt2
  2009-04-02 16:02                     ` Will Schmidt
@ 2009-04-02 16:45                       ` Thomas Gleixner
  2009-04-02 17:24                         ` Will Schmidt
  0 siblings, 1 reply; 359+ messages in thread
From: Thomas Gleixner @ 2009-04-02 16:45 UTC (permalink / raw)
  To: Will Schmidt
  Cc: LKML, rt-users, Ingo Molnar, Steven Rostedt, Peter Zijlstra,
	Carsten Emde, Clark Williams, Frank Rowand, Robin Gareus,
	Gregory Haskins, Philippe Reynes, Fernando Lopez-Lezcano

On Thu, 2 Apr 2009, Will Schmidt wrote:

> On Thu, 2009-04-02 at 02:17 +0200, Thomas Gleixner wrote:
> > We are pleased to announce the next update to our new preempt-rt
> > series.
> > 
> >       - fix a fork/exit bug in the signal per task cache (/me puts on
> >         a huge brown paper bag - Thanks to Phillipe Reynes and Will
> >         Schmidt for reporting and testing)
> > 
> >       - fix a group scheduling migration accounting bug (decoded with
> >         and fixed by Peter Zijlstra - reported by Robin Gareus)
> > 
> >       - tlb gather rework by Peter Zijlstra - Thanks Peter !
> > 
> >       - the usual fixlets
> > 
> > The tlb rework might be incomplete on some of the uncountable
> > incarnations of PowerPC and ARM platforms, so look out for wreckage
> > and keep the usual tools (fire-extinguishers, brooms, buckets etc.)
> > handy.
> 
> I can confirm that the tlb rework does appear to be missing some parts
> for Power.  (Using 2.6.29-rt3 on pseries ppc64)
> 
> arch/powerpc/kernel/built-in.o:(.toc1+0x4d0): undefined reference to
> `per_cpu__ppc64_tlb_batch'
> <...>
> mm/built-in.o:(.toc1+0xed0): more undefined references to
> `per_cpu__ppc64_tlb_batch' follow
> 
> Not clear to me if this is just missing a "DEFINE_PER_CPU_LOCKED" to
> replace the removed "DEFINE_PER_CPU", (similar to the prior RT patches),
> or if the tlb rework is more involved.   So, I will patiently remain
> tuned in.  :-)

No, the DEFINE_PER_CPU was removed accidentaly. Should have stayed there

Thanks,

	tglx

--------

Index: linux-2.6-tip/arch/powerpc/mm/tlb_hash64.c
===================================================================
--- linux-2.6-tip.orig/arch/powerpc/mm/tlb_hash64.c
+++ linux-2.6-tip/arch/powerpc/mm/tlb_hash64.c
@@ -32,6 +32,8 @@
 #include <asm/bug.h>
 #include <asm/machdep.h>
 
+DEFINE_PER_CPU(struct ppc64_tlb_batch, ppc64_tlb_batch);
+
 /*
  * A linux PTE was changed and the corresponding hash table entry
  * neesd to be flushed. This function will either perform the flush

^ permalink raw reply	[flat|nested] 359+ messages in thread

* Re: [Announce] 2.6.29-rt2
  2009-04-02 16:45                       ` Thomas Gleixner
@ 2009-04-02 17:24                         ` Will Schmidt
  2009-04-03  9:43                           ` Peter Zijlstra
  0 siblings, 1 reply; 359+ messages in thread
From: Will Schmidt @ 2009-04-02 17:24 UTC (permalink / raw)
  To: Thomas Gleixner
  Cc: LKML, rt-users, Ingo Molnar, Steven Rostedt, Peter Zijlstra,
	Carsten Emde, Clark Williams, Frank Rowand, Robin Gareus,
	Gregory Haskins, Philippe Reynes, Fernando Lopez-Lezcano

On Thu, 2009-04-02 at 18:45 +0200, Thomas Gleixner wrote:
> On Thu, 2 Apr 2009, Will Schmidt wrote:
> 
> > On Thu, 2009-04-02 at 02:17 +0200, Thomas Gleixner wrote:
> > > We are pleased to announce the next update to our new preempt-rt
> > > series.
> > > 
> > >       - fix a fork/exit bug in the signal per task cache (/me puts on
> > >         a huge brown paper bag - Thanks to Phillipe Reynes and Will
> > >         Schmidt for reporting and testing)
> > > 
> > >       - fix a group scheduling migration accounting bug (decoded with
> > >         and fixed by Peter Zijlstra - reported by Robin Gareus)
> > > 
> > >       - tlb gather rework by Peter Zijlstra - Thanks Peter !
> > > 
> > >       - the usual fixlets
> > > 
> > > The tlb rework might be incomplete on some of the uncountable
> > > incarnations of PowerPC and ARM platforms, so look out for wreckage
> > > and keep the usual tools (fire-extinguishers, brooms, buckets etc.)
> > > handy.
> > 
> > I can confirm that the tlb rework does appear to be missing some parts
> > for Power.  (Using 2.6.29-rt3 on pseries ppc64)
> > 
> > arch/powerpc/kernel/built-in.o:(.toc1+0x4d0): undefined reference to
> > `per_cpu__ppc64_tlb_batch'
> > <...>
> > mm/built-in.o:(.toc1+0xed0): more undefined references to
> > `per_cpu__ppc64_tlb_batch' follow
> > 
> > Not clear to me if this is just missing a "DEFINE_PER_CPU_LOCKED" to
> > replace the removed "DEFINE_PER_CPU", (similar to the prior RT patches),
> > or if the tlb rework is more involved.   So, I will patiently remain
> > tuned in.  :-)
> 
> No, the DEFINE_PER_CPU was removed accidentaly. Should have stayed there
> 
> Thanks,
> 
> 	tglx

Thanks for the quick respin. 

Panic during boot:
<snip>
Uniform Multi-Platform E-IDE driver
ide-gd driver 1.18
ide-cd driver 5.00
mice: PS/2 mouse device common for all mice
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 17
Freeing unused kernel memory: 292k freed
Red Hat nash version 5.1.19.6 starting
Mounting proc filesystem
Mounting sysfs filesystem
Creating /dev
Unable to handle kernel paging request for instruction fetch
Faulting instruction address: 0x00000c30
cpu 0x3: Vector: 400 (Instruction Access) at [c0000000e8203b00]
    pc: 0000000000000c30
    lr: c0000000000b7d24: .rcu_process_callbacks+0xc0/0xec
    sp: c0000000e8203d80
   msr: 8000000040009032
  current = 0xc0000000e81ff0f0
  paca    = 0xc000000000663800
    pid   = 53, comm = sirq-rcu/3
enter ? for help
[c0000000e8203d80] c0000000000b7d24 .rcu_process_callbacks+0xc0/0xec
(unreliable)
[c0000000e8203e10] c000000000070f48 .ksoftirqd+0x208/0x39c
[c0000000e8203f00] c000000000085a34 .kthread+0x78/0xc4
[c0000000e8203f90] c000000000029818 .kernel_thread+0x54/0x70
3:mon>                
3:mon> r
R00 = c0000000e8480100   R16 = c000000000467280
R01 = c0000000e8203d80   R17 = c000000000465980
R02 = 000000000014ff97   R18 = 0000000000000000
R03 = c0000000e6b6b880   R19 = c0000000e8200000
R04 = 0000000000000001   R20 = c00000000065be58
R05 = c000000000663800   R21 = 0000000000000000
R06 = c0000000e8203cc8   R22 = 0000000000000003
R07 = 0000000000200200   R23 = 0000000000000003
R08 = 0000000000000001   R24 = c000000000663800
R09 = c0000000e6b60eb0   R25 = c000000000696f00
R10 = c000000000538280   R26 = c00000000079e620
R11 = 0000000000000001   R27 = 0000000000000100
R12 = 0000000084000082   R28 = 0000000000000001
R13 = c000000000663800   R29 = c00000000079ea28
R14 = 0000000000000000   R30 = c0000000005d1538
R15 = 0000000002100000   R31 = c0000000e8480100
pc  = 0000000000000c30
lr  = c0000000000b7d24 .rcu_process_callbacks+0xc0/0xec
msr = 8000000040009032   cr  = 24000088
ctr = 0000000000000c31   xer = 0000000020000004   trap =  400




> 
> --------
> 
> Index: linux-2.6-tip/arch/powerpc/mm/tlb_hash64.c
> ===================================================================
> --- linux-2.6-tip.orig/arch/powerpc/mm/tlb_hash64.c
> +++ linux-2.6-tip/arch/powerpc/mm/tlb_hash64.c
> @@ -32,6 +32,8 @@
>  #include <asm/bug.h>
>  #include <asm/machdep.h>
> 
> +DEFINE_PER_CPU(struct ppc64_tlb_batch, ppc64_tlb_batch);
> +
>  /*
>   * A linux PTE was changed and the corresponding hash table entry
>   * neesd to be flushed. This function will either perform the flush


^ permalink raw reply	[flat|nested] 359+ messages in thread

* Re: [Announce] 2.6.29-rt2
  2009-04-02 17:24                         ` Will Schmidt
@ 2009-04-03  9:43                           ` Peter Zijlstra
  2009-04-03 15:30                             ` Will Schmidt
  0 siblings, 1 reply; 359+ messages in thread
From: Peter Zijlstra @ 2009-04-03  9:43 UTC (permalink / raw)
  To: will_schmidt
  Cc: Thomas Gleixner, LKML, rt-users, Ingo Molnar, Steven Rostedt,
	Carsten Emde, Clark Williams, Frank Rowand, Robin Gareus,
	Gregory Haskins, Philippe Reynes, Fernando Lopez-Lezcano

On Thu, 2009-04-02 at 12:24 -0500, Will Schmidt wrote:

> > --------
> > 
> > Index: linux-2.6-tip/arch/powerpc/mm/tlb_hash64.c
> > ===================================================================
> > --- linux-2.6-tip.orig/arch/powerpc/mm/tlb_hash64.c
> > +++ linux-2.6-tip/arch/powerpc/mm/tlb_hash64.c
> > @@ -32,6 +32,8 @@
> >  #include <asm/bug.h>
> >  #include <asm/machdep.h>
> > 
> > +DEFINE_PER_CPU(struct ppc64_tlb_batch, ppc64_tlb_batch);
> > +
> >  /*
> >   * A linux PTE was changed and the corresponding hash table entry
> >   * neesd to be flushed. This function will either perform the flush

Will, could you see if the below makes your splat go away?

diff --git a/arch/powerpc/include/asm/tlb.h b/arch/powerpc/include/asm/tlb.h
index ec82dac..3ddc8f6 100644
--- a/arch/powerpc/include/asm/tlb.h
+++ b/arch/powerpc/include/asm/tlb.h
@@ -38,6 +38,8 @@ struct arch_mmu_gather {
 	struct pte_freelist_batch *batch;
 };
 
+#define ARCH_MMU_GATHER_INIT (struct arch_mmu_gather){ .batch = NULL, }
+
 #if !defined(CONFIG_PPC_STD_MMU)
 
 #define tlb_flush(tlb)			flush_tlb_mm((tlb)->mm)
diff --git a/include/asm-generic/tlb.h b/include/asm-generic/tlb.h
index 7f2167e..50a09de 100644
--- a/include/asm-generic/tlb.h
+++ b/include/asm-generic/tlb.h
@@ -71,6 +71,10 @@ tlb_gather_mmu(struct mmu_gather *tlb, struct mm_struct *mm, unsigned int full_m
 		tlb->nr = ~0U;
 
 	tlb->fullmm = full_mm_flush;
+
+#ifdef HAVE_ARCH_MMU_GATHER
+	tlb->arch = ARCH_MMU_GATHER_INIT;
+#endif
 }
 
 static inline void


^ permalink raw reply related	[flat|nested] 359+ messages in thread

* Re: [Announce] 2.6.29-rt2
  2009-04-03  9:43                           ` Peter Zijlstra
@ 2009-04-03 15:30                             ` Will Schmidt
  0 siblings, 0 replies; 359+ messages in thread
From: Will Schmidt @ 2009-04-03 15:30 UTC (permalink / raw)
  To: Peter Zijlstra
  Cc: Thomas Gleixner, LKML, rt-users, Ingo Molnar, Steven Rostedt,
	Carsten Emde, Clark Williams, Frank Rowand, Robin Gareus,
	Gregory Haskins, Philippe Reynes, Fernando Lopez-Lezcano

On Fri, 2009-04-03 at 11:43 +0200, Peter Zijlstra wrote:
> On Thu, 2009-04-02 at 12:24 -0500, Will Schmidt wrote:
> 
> > > --------
> > > 
> > > Index: linux-2.6-tip/arch/powerpc/mm/tlb_hash64.c
> > > ===================================================================
> > > --- linux-2.6-tip.orig/arch/powerpc/mm/tlb_hash64.c
> > > +++ linux-2.6-tip/arch/powerpc/mm/tlb_hash64.c
> > > @@ -32,6 +32,8 @@
> > >  #include <asm/bug.h>
> > >  #include <asm/machdep.h>
> > > 
> > > +DEFINE_PER_CPU(struct ppc64_tlb_batch, ppc64_tlb_batch);
> > > +
> > >  /*
> > >   * A linux PTE was changed and the corresponding hash table entry
> > >   * neesd to be flushed. This function will either perform the flush
> 
> Will, could you see if the below makes your splat go away?

It does..   booted clean on a power6 blade with this patch applied.
Thanks.  :-)

-Will


> 
> diff --git a/arch/powerpc/include/asm/tlb.h b/arch/powerpc/include/asm/tlb.h
> index ec82dac..3ddc8f6 100644
> --- a/arch/powerpc/include/asm/tlb.h
> +++ b/arch/powerpc/include/asm/tlb.h
> @@ -38,6 +38,8 @@ struct arch_mmu_gather {
>  	struct pte_freelist_batch *batch;
>  };
> 
> +#define ARCH_MMU_GATHER_INIT (struct arch_mmu_gather){ .batch = NULL, }
> +
>  #if !defined(CONFIG_PPC_STD_MMU)
> 
>  #define tlb_flush(tlb)			flush_tlb_mm((tlb)->mm)
> diff --git a/include/asm-generic/tlb.h b/include/asm-generic/tlb.h
> index 7f2167e..50a09de 100644
> --- a/include/asm-generic/tlb.h
> +++ b/include/asm-generic/tlb.h
> @@ -71,6 +71,10 @@ tlb_gather_mmu(struct mmu_gather *tlb, struct mm_struct *mm, unsigned int full_m
>  		tlb->nr = ~0U;
> 
>  	tlb->fullmm = full_mm_flush;
> +
> +#ifdef HAVE_ARCH_MMU_GATHER
> +	tlb->arch = ARCH_MMU_GATHER_INIT;
> +#endif
>  }
> 
>  static inline void
> 


^ permalink raw reply	[flat|nested] 359+ messages in thread

* [Announce] 2.6.29.1-rt4
  2009-04-02  0:17                   ` [Announce] 2.6.29-rt2 Thomas Gleixner
  2009-04-02 16:02                     ` Will Schmidt
@ 2009-04-03 17:21                     ` Thomas Gleixner
  2009-04-03 23:04                       ` Fernando Lopez-Lezcano
                                         ` (2 more replies)
  1 sibling, 3 replies; 359+ messages in thread
From: Thomas Gleixner @ 2009-04-03 17:21 UTC (permalink / raw)
  To: LKML
  Cc: rt-users, Ingo Molnar, Steven Rostedt, Peter Zijlstra,
	Carsten Emde, Clark Williams, Frank Rowand, Robin Gareus,
	Gregory Haskins, Philippe Reynes, Fernando Lopez-Lezcano,
	Will Schmidt

We are pleased to announce the next update to our new preempt-rt
series.
  
	- rebased to 2.6.29.1

	- powerpc64 tlb rework fix by Peter

Download locations:
 
     http://rt.et.redhat.com/download/
     http://www.kernel.org/pub/linux/kernel/projects/rt/
  
Information on the RT patch can be found at:
 
     http://rt.wiki.kernel.org/index.php/Main_Page
 
to build the 2.6.29.1-rt4 tree, the following patches should be
applied:
 
     http://www.kernel.org/pub/linux/kernel/v2.6/linux-2.6.29.1.tar.bz2
     http://www.kernel.org/pub/linux/kernel/projects/rt/patch-2.6.29.1-rt4.bz2
 
The broken out patches are also available at the same download
locations.
 
Enjoy !

       tglx


^ permalink raw reply	[flat|nested] 359+ messages in thread

* Re: [Announce] 2.6.29.1-rt4
  2009-04-03 17:21                     ` [Announce] 2.6.29.1-rt4 Thomas Gleixner
@ 2009-04-03 23:04                       ` Fernando Lopez-Lezcano
  2009-04-04  4:30                         ` Thomas Gleixner
  2009-04-05  3:28                         ` GeunSik Lim
  2009-04-08 17:49                       ` [Announce] 2.6.29.1-rt5 Thomas Gleixner
  2 siblings, 1 reply; 359+ messages in thread
From: Fernando Lopez-Lezcano @ 2009-04-03 23:04 UTC (permalink / raw)
  To: Thomas Gleixner
  Cc: nando, LKML, rt-users, Ingo Molnar, Steven Rostedt,
	Peter Zijlstra, Carsten Emde, Clark Williams, Frank Rowand,
	Robin Gareus, Gregory Haskins, Philippe Reynes, Will Schmidt

On Fri, 2009-04-03 at 19:21 +0200, Thomas Gleixner wrote:
> We are pleased to announce the next update to our new preempt-rt
> series.
>   
> 	- rebased to 2.6.29.1
> 
> 	- powerpc64 tlb rework fix by Peter

Thanks for cc'ing me...

Just a heads up. I'm still having shutdown/suspend problems with this
release as before (I had not reported the suspend problem, I think -
machine hangs and has to be power cycled). Booting with "noreplace-smp"
fixes both. Is this something I could disable through configuration
options?

I was also seeing a hard hang when running a java program (with the
Fedora 10 open source java) - the swingosc gui component of
SuperCollider 3 (a computer music synthesis program). Impossible to know
what had failed, machine completely catatonic and nothing left on the
logs. 

I managed to start the same program _once_ (have not tested again) with
2.6.29.1/rt4 + some patches & config from fc10' koji 2.6.29.1-15. The
mouse seemed to pause a couple of times and then I killed the program.
Restarting it again was successful. Sorry to not have more hard info...

-- Fernando



^ permalink raw reply	[flat|nested] 359+ messages in thread

* Re: [Announce] 2.6.29.1-rt4
  2009-04-03 23:04                       ` Fernando Lopez-Lezcano
@ 2009-04-04  4:30                         ` Thomas Gleixner
  2009-04-04  6:57                           ` Fernando Lopez-Lezcano
  0 siblings, 1 reply; 359+ messages in thread
From: Thomas Gleixner @ 2009-04-04  4:30 UTC (permalink / raw)
  To: Fernando Lopez-Lezcano
  Cc: LKML, rt-users, Ingo Molnar, Steven Rostedt, Peter Zijlstra,
	Carsten Emde, Clark Williams, Frank Rowand, Robin Gareus,
	Gregory Haskins, Philippe Reynes, Will Schmidt

On Fri, 3 Apr 2009, Fernando Lopez-Lezcano wrote:

> On Fri, 2009-04-03 at 19:21 +0200, Thomas Gleixner wrote:
> > We are pleased to announce the next update to our new preempt-rt
> > series.
> >   
> > 	- rebased to 2.6.29.1
> > 
> > 	- powerpc64 tlb rework fix by Peter
> 
> Thanks for cc'ing me...
> 
> Just a heads up. I'm still having shutdown/suspend problems with this
> release as before (I had not reported the suspend problem, I think -
> machine hangs and has to be power cycled). Booting with "noreplace-smp"
> fixes both. Is this something I could disable through configuration
> options?

No. I have this shutdown/suspend thing on my todo list. Can you send
me your .config please ? This happens with the stock -rt kernel or do
you have other patches on top of it ?
 
> I was also seeing a hard hang when running a java program (with the
> Fedora 10 open source java) - the swingosc gui component of
> SuperCollider 3 (a computer music synthesis program). Impossible to know
> what had failed, machine completely catatonic and nothing left on the
> logs. 
> 
> I managed to start the same program _once_ (have not tested again) with
> 2.6.29.1/rt4 + some patches & config from fc10' koji 2.6.29.1-15. The
> mouse seemed to pause a couple of times and then I killed the program.
> Restarting it again was successful. Sorry to not have more hard info...

Too bad that I can't find my crystal ball :)

Thanks,

	tglx

^ permalink raw reply	[flat|nested] 359+ messages in thread

* Re: [Announce] 2.6.29.1-rt4
  2009-04-04  4:30                         ` Thomas Gleixner
@ 2009-04-04  6:57                           ` Fernando Lopez-Lezcano
  2009-04-05 13:53                             ` Thomas Gleixner
  0 siblings, 1 reply; 359+ messages in thread
From: Fernando Lopez-Lezcano @ 2009-04-04  6:57 UTC (permalink / raw)
  To: Thomas Gleixner
  Cc: nando, LKML, rt-users, Ingo Molnar, Steven Rostedt,
	Peter Zijlstra, Carsten Emde, Clark Williams, Frank Rowand,
	Robin Gareus, Gregory Haskins, Philippe Reynes, Will Schmidt

[-- Attachment #1: Type: text/plain, Size: 2560 bytes --]

On Sat, 2009-04-04 at 06:30 +0200, Thomas Gleixner wrote:
> On Fri, 3 Apr 2009, Fernando Lopez-Lezcano wrote:
> > On Fri, 2009-04-03 at 19:21 +0200, Thomas Gleixner wrote:
> > > We are pleased to announce the next update to our new preempt-rt
> > > series.
> > >   
> > > 	- rebased to 2.6.29.1
> > > 
> > > 	- powerpc64 tlb rework fix by Peter
> > 
> > Thanks for cc'ing me...
> > 
> > Just a heads up. I'm still having shutdown/suspend problems with this
> > release as before (I had not reported the suspend problem, I think -
> > machine hangs and has to be power cycled). Booting with "noreplace-smp"
> > fixes both. Is this something I could disable through configuration
> > options?
> 
> No. I have this shutdown/suspend thing on my todo list. 

Ah, ok. No problem. If it were not for this feature I'd probably release
a test version for Planet CCRMA. 

> Can you send me your .config please ? 

Attached. 

> This happens with the stock -rt kernel or do
> you have other patches on top of it ?

Other patches on top of it. I'm building rpm packages merging the latest
Fedora .src.rpm's with rt (as I have been doing for a long long time). I
have to have as close a kernel as possible to the Fedora kernels
(drivers + configs, within reason - some of the stuff does not patch
cleanly of course[*]). The kernel I'm testing is merged with
2.6.29.1-15 / fc10. 

Sigh, I know, I know, I have to try to test with the vanilla tree. I
don't anticipate having time to do that soon (concert tomorrow, trip
starting next week). 

> > I was also seeing a hard hang when running a java program (with the
> > Fedora 10 open source java) - the swingosc gui component of
> > SuperCollider 3 (a computer music synthesis program). Impossible to know
> > what had failed, machine completely catatonic and nothing left on the
> > logs. 
> > 
> > I managed to start the same program _once_ (have not tested again) with
> > 2.6.29.1/rt4 + some patches & config from fc10' koji 2.6.29.1-15. The
> > mouse seemed to pause a couple of times and then I killed the program.
> > Restarting it again was successful. Sorry to not have more hard info...
> 
> Too bad that I can't find my crystal ball :)

You __have__ one?? Wow. Anyway, it seems that the java problem is gone
or something else killed it (another software upgrade perhaps?). Which
is good. 

Thanks again, looking forward to the next release!
-- Fernando

[*] over the years I have tried different approaches and this is the one
that has given me kernels that work and are most compatible with the
rest of Fedora. 


[-- Attachment #2: config-2.6.29.1-1.rt4.1.fc10.ccrma.i686.rtPAE.bz2 --]
[-- Type: application/x-bzip, Size: 23307 bytes --]

^ permalink raw reply	[flat|nested] 359+ messages in thread

* Re: [Announce] 2.6.29.1-rt4
  2009-04-03 17:21                     ` [Announce] 2.6.29.1-rt4 Thomas Gleixner
@ 2009-04-05  3:28                         ` GeunSik Lim
  2009-04-05  3:28                         ` GeunSik Lim
  2009-04-08 17:49                       ` [Announce] 2.6.29.1-rt5 Thomas Gleixner
  2 siblings, 0 replies; 359+ messages in thread
From: GeunSik Lim @ 2009-04-05  3:28 UTC (permalink / raw)
  To: Thomas Gleixner
  Cc: LKML, rt-users, Ingo Molnar, Steven Rostedt, Peter Zijlstra,
	Carsten Emde, Clark Williams, Frank Rowand, Robin Gareus,
	Gregory Haskins, Philippe Reynes, Fernando Lopez-Lezcano,
	Will Schmidt

Dear Thomas,
>
>The broken out patches are also available at the same download
>locations.
>
>Enjoy !

Thank you for new release announce.
I am using new version ( linux-2.6.29.1-rt4 ) now .
config file is http://leemgs1.googlecode.com/files/i386.2.6.29.1-rt4.ftrace.config.20090404

I have one question. What is "broken-out" 's meaning  for rt patch file?

When I opened  realtime patch  files for vanilla kernel,
I always checked 2 files like belows.
http://www.kernel.org/pub/linux/kernel/projects/rt/patch-2.6.29.1-rt4-broken-out.tar.bz2
<-- collection of seperate files for each patch.
http://www.kernel.org/pub/linux/kernel/projects/rt/patch-2.6.29.1-rt4.bz2
<-- only one patch file.

What is difference  meaning of file-name format
between "patch-2.6.29.1-rt4-broken-out.tar.bz2" and "patch-2.6.29.1-rt4.bz2" ?	
I have always wondered that.
I am sorry for sending this stupid and easy question.

Thanks,
GeunSik Lim,

2009/4/4 Thomas Gleixner <tglx@linutronix.de>:
> We are pleased to announce the next update to our new preempt-rt
> series.
>
>        - rebased to 2.6.29.1
>
>        - powerpc64 tlb rework fix by Peter
>
> Download locations:
>
>     http://rt.et.redhat.com/download/
>     http://www.kernel.org/pub/linux/kernel/projects/rt/
>
> Information on the RT patch can be found at:
>
>     http://rt.wiki.kernel.org/index.php/Main_Page
>
> to build the 2.6.29.1-rt4 tree, the following patches should be
> applied:
>
>     http://www.kernel.org/pub/linux/kernel/v2.6/linux-2.6.29.1.tar.bz2
>     http://www.kernel.org/pub/linux/kernel/projects/rt/patch-2.6.29.1-rt4.bz2
>
> The broken out patches are also available at the same download
> locations.
>
> Enjoy !
>
>       tglx
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-rt-users" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
>



-- 
Regards,
GeunSik Lim
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

^ permalink raw reply	[flat|nested] 359+ messages in thread

* Re: [Announce] 2.6.29.1-rt4
@ 2009-04-05  3:28                         ` GeunSik Lim
  0 siblings, 0 replies; 359+ messages in thread
From: GeunSik Lim @ 2009-04-05  3:28 UTC (permalink / raw)
  To: Thomas Gleixner
  Cc: LKML, rt-users, Ingo Molnar, Steven Rostedt, Peter Zijlstra,
	Carsten Emde, Clark Williams, Frank Rowand, Robin Gareus,
	Gregory Haskins, Philippe Reynes, Fernando Lopez-Lezcano,
	Will Schmidt

Dear Thomas,
>
>The broken out patches are also available at the same download
>locations.
>
>Enjoy !

Thank you for new release announce.
I am using new version ( linux-2.6.29.1-rt4 ) now .
config file is http://leemgs1.googlecode.com/files/i386.2.6.29.1-rt4.ftrace.config.20090404

I have one question. What is "broken-out" 's meaning  for rt patch file?

When I opened  realtime patch  files for vanilla kernel,
I always checked 2 files like belows.
http://www.kernel.org/pub/linux/kernel/projects/rt/patch-2.6.29.1-rt4-broken-out.tar.bz2
<-- collection of seperate files for each patch.
http://www.kernel.org/pub/linux/kernel/projects/rt/patch-2.6.29.1-rt4.bz2
<-- only one patch file.

What is difference  meaning of file-name format
between "patch-2.6.29.1-rt4-broken-out.tar.bz2" and "patch-2.6.29.1-rt4.bz2" ?	
I have always wondered that.
I am sorry for sending this stupid and easy question.

Thanks,
GeunSik Lim,

2009/4/4 Thomas Gleixner <tglx@linutronix.de>:
> We are pleased to announce the next update to our new preempt-rt
> series.
>
>        - rebased to 2.6.29.1
>
>        - powerpc64 tlb rework fix by Peter
>
> Download locations:
>
>     http://rt.et.redhat.com/download/
>     http://www.kernel.org/pub/linux/kernel/projects/rt/
>
> Information on the RT patch can be found at:
>
>     http://rt.wiki.kernel.org/index.php/Main_Page
>
> to build the 2.6.29.1-rt4 tree, the following patches should be
> applied:
>
>     http://www.kernel.org/pub/linux/kernel/v2.6/linux-2.6.29.1.tar.bz2
>     http://www.kernel.org/pub/linux/kernel/projects/rt/patch-2.6.29.1-rt4.bz2
>
> The broken out patches are also available at the same download
> locations.
>
> Enjoy !
>
>       tglx
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-rt-users" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
>



-- 
Regards,
GeunSik Lim
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/
--
To unsubscribe from this list: send the line "unsubscribe linux-rt-users" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

^ permalink raw reply	[flat|nested] 359+ messages in thread

* Re: [Announce] 2.6.29.1-rt4
  2009-04-05  3:28                         ` GeunSik Lim
  (?)
@ 2009-04-05  8:47                         ` Thomas Gleixner
  2009-04-05  8:53                           ` Thomas Gleixner
  -1 siblings, 1 reply; 359+ messages in thread
From: Thomas Gleixner @ 2009-04-05  8:47 UTC (permalink / raw)
  To: GeunSik Lim
  Cc: LKML, rt-users, Ingo Molnar, Steven Rostedt, Peter Zijlstra,
	Carsten Emde, Clark Williams, Frank Rowand, Robin Gareus,
	Gregory Haskins, Philippe Reynes, Fernando Lopez-Lezcano,
	Will Schmidt

GeunSik,

On Sun, 5 Apr 2009, GeunSik Lim wrote:
> I have one question. What is "broken-out" 's meaning  for rt patch file?

The broken out tar ball contains a patch series of smaller patches,
which need to be applied in a give order. The order is determined from
the series file. It's a "quilt" series. quilt is a patch series
management tool. "man script" 

We keep those smaller patches for various reasons:

- It's way easier to move forward to the next kernel version with
  smaller patches than with a huge all in one patch.

- It's easier to split out functionality from the patches and rework
  that particular issue and replace the patches in the series

The broken out series is provided for people who want to look into the
details of the patches and for preempt-rt developers.

patch-2.6.X-rtY.bz2 is the combination of all patches from the series
applied. We provide this as a conveniance for users and testers so
they just have to apply one big patch.

Thanks,

	tglx

^ permalink raw reply	[flat|nested] 359+ messages in thread

* Re: [Announce] 2.6.29.1-rt4
  2009-04-05  8:47                         ` Thomas Gleixner
@ 2009-04-05  8:53                           ` Thomas Gleixner
  0 siblings, 0 replies; 359+ messages in thread
From: Thomas Gleixner @ 2009-04-05  8:53 UTC (permalink / raw)
  To: GeunSik Lim
  Cc: LKML, rt-users, Ingo Molnar, Steven Rostedt, Peter Zijlstra,
	Carsten Emde, Clark Williams, Frank Rowand, Robin Gareus,
	Gregory Haskins, Philippe Reynes, Fernando Lopez-Lezcano,
	Will Schmidt

On Sun, 5 Apr 2009, Thomas Gleixner wrote:

> GeunSik,
> 
> On Sun, 5 Apr 2009, GeunSik Lim wrote:
> > I have one question. What is "broken-out" 's meaning  for rt patch file?
> 
> The broken out tar ball contains a patch series of smaller patches,
> which need to be applied in a give order. The order is determined from
> the series file. It's a "quilt" series. quilt is a patch series
> management tool. "man script" 

Of course I meant: man quilt

   tglx

^ permalink raw reply	[flat|nested] 359+ messages in thread

* Re: [Announce] 2.6.29.1-rt4
  2009-04-04  6:57                           ` Fernando Lopez-Lezcano
@ 2009-04-05 13:53                             ` Thomas Gleixner
  2009-04-05 21:49                               ` Fernando Lopez-Lezcano
  0 siblings, 1 reply; 359+ messages in thread
From: Thomas Gleixner @ 2009-04-05 13:53 UTC (permalink / raw)
  To: Fernando Lopez-Lezcano
  Cc: LKML, rt-users, Ingo Molnar, Steven Rostedt, Peter Zijlstra,
	Carsten Emde, Clark Williams, Frank Rowand, Robin Gareus,
	Gregory Haskins, Philippe Reynes, Will Schmidt

On Fri, 3 Apr 2009, Fernando Lopez-Lezcano wrote:
> > > Just a heads up. I'm still having shutdown/suspend problems with this
> > > release as before (I had not reported the suspend problem, I think -
> > > machine hangs and has to be power cycled). Booting with "noreplace-smp"
> > > fixes both. Is this something I could disable through configuration
> > > options?
> > 
> > No. I have this shutdown/suspend thing on my todo list. 
> 
> Ah, ok. No problem. If it were not for this feature I'd probably release
> a test version for Planet CCRMA. 

Happens this shutdown/suspend problem every time or is this sporadic ?

Thanks,

	tglx

^ permalink raw reply	[flat|nested] 359+ messages in thread

* Re: [Announce] 2.6.29.1-rt4
  2009-04-05 13:53                             ` Thomas Gleixner
@ 2009-04-05 21:49                               ` Fernando Lopez-Lezcano
  2009-04-05 22:02                                 ` Thomas Gleixner
  0 siblings, 1 reply; 359+ messages in thread
From: Fernando Lopez-Lezcano @ 2009-04-05 21:49 UTC (permalink / raw)
  To: Thomas Gleixner
  Cc: nando, LKML, rt-users, Ingo Molnar, Steven Rostedt,
	Peter Zijlstra, Carsten Emde, Clark Williams, Frank Rowand,
	Robin Gareus, Gregory Haskins, Philippe Reynes, Will Schmidt

On Sun, 2009-04-05 at 15:53 +0200, Thomas Gleixner wrote:
> On Fri, 3 Apr 2009, Fernando Lopez-Lezcano wrote:
> > > > Just a heads up. I'm still having shutdown/suspend problems with this
> > > > release as before (I had not reported the suspend problem, I think -
> > > > machine hangs and has to be power cycled). Booting with "noreplace-smp"
> > > > fixes both. Is this something I could disable through configuration
> > > > options?
> > > 
> > > No. I have this shutdown/suspend thing on my todo list. 
> > 
> > Ah, ok. No problem. If it were not for this feature I'd probably release
> > a test version for Planet CCRMA. 
> 
> Happens this shutdown/suspend problem every time or is this sporadic ?

For me it is repeatable (on both a laptop and a desktop machine so it
does not appear to be very hardware specific). It might be of course an
interaction with the Fedora patches I use. 

In the category of "I wish I had a crystal ball" reports with no hard
data, I can confirm that my build of rt4 does hang. I was trying
2.6.29.1-rt4 during a rehearsal for a concert yesterday[*] and after a
hard hang I reverted to the vanilla Fedora kernel (which is what I had
been using because of that problem - no clues left behind in logs). 

-- Fernando

[*] a T61 lenovo laptop with intel graphics running jack 1.9.1,
linuxsampler, supercollider with two instances of the synthesis engine
doing both audio and midi processing, a convolution reverb using jconv,
ambisonics decoding through two instances of ambdec and the java based
swingosc supercollider gui. Very loaded. 



^ permalink raw reply	[flat|nested] 359+ messages in thread

* Re: [Announce] 2.6.29.1-rt4
  2009-04-05 21:49                               ` Fernando Lopez-Lezcano
@ 2009-04-05 22:02                                 ` Thomas Gleixner
  2009-04-05 23:10                                   ` Fernando Lopez-Lezcano
  0 siblings, 1 reply; 359+ messages in thread
From: Thomas Gleixner @ 2009-04-05 22:02 UTC (permalink / raw)
  To: Fernando Lopez-Lezcano
  Cc: LKML, rt-users, Ingo Molnar, Steven Rostedt, Peter Zijlstra,
	Carsten Emde, Clark Williams, Frank Rowand, Robin Gareus,
	Gregory Haskins, Philippe Reynes, Will Schmidt

On Sun, 5 Apr 2009, Fernando Lopez-Lezcano wrote:

> On Sun, 2009-04-05 at 15:53 +0200, Thomas Gleixner wrote:
> > On Fri, 3 Apr 2009, Fernando Lopez-Lezcano wrote:
> > > > > Just a heads up. I'm still having shutdown/suspend problems with this
> > > > > release as before (I had not reported the suspend problem, I think -
> > > > > machine hangs and has to be power cycled). Booting with "noreplace-smp"
> > > > > fixes both. Is this something I could disable through configuration
> > > > > options?
> > > > 
> > > > No. I have this shutdown/suspend thing on my todo list. 
> > > 
> > > Ah, ok. No problem. If it were not for this feature I'd probably release
> > > a test version for Planet CCRMA. 
> > 
> > Happens this shutdown/suspend problem every time or is this sporadic ?
> 
> For me it is repeatable (on both a laptop and a desktop machine so it
> does not appear to be very hardware specific). It might be of course an
> interaction with the Fedora patches I use. 
> 
> In the category of "I wish I had a crystal ball" reports with no hard
> data, I can confirm that my build of rt4 does hang. I was trying
> 2.6.29.1-rt4 during a rehearsal for a concert yesterday[*] and after a
> hard hang I reverted to the vanilla Fedora kernel (which is what I had
> been using because of that problem - no clues left behind in logs). 

Hmm. Can you upload your full patch queue and the binary rpm so I can
give it a test ride ?

Thanks,

	tglx

^ permalink raw reply	[flat|nested] 359+ messages in thread

* Re: [Announce] 2.6.29.1-rt4
  2009-04-05 22:02                                 ` Thomas Gleixner
@ 2009-04-05 23:10                                   ` Fernando Lopez-Lezcano
  2009-04-06 19:54                                     ` Thomas Gleixner
  0 siblings, 1 reply; 359+ messages in thread
From: Fernando Lopez-Lezcano @ 2009-04-05 23:10 UTC (permalink / raw)
  To: Thomas Gleixner
  Cc: nando, LKML, rt-users, Ingo Molnar, Steven Rostedt,
	Peter Zijlstra, Carsten Emde, Clark Williams, Frank Rowand,
	Robin Gareus, Gregory Haskins, Philippe Reynes, Will Schmidt

On Mon, 2009-04-06 at 00:02 +0200, Thomas Gleixner wrote:
> On Sun, 5 Apr 2009, Fernando Lopez-Lezcano wrote:
> > On Sun, 2009-04-05 at 15:53 +0200, Thomas Gleixner wrote:
> > > On Fri, 3 Apr 2009, Fernando Lopez-Lezcano wrote:
> > > > > > Just a heads up. I'm still having shutdown/suspend problems with this
> > > > > > release as before (I had not reported the suspend problem, I think -
> > > > > > machine hangs and has to be power cycled). Booting with "noreplace-smp"
> > > > > > fixes both. Is this something I could disable through configuration
> > > > > > options?
> > > > > 
> > > > > No. I have this shutdown/suspend thing on my todo list. 
> > > > 
> > > > Ah, ok. No problem. If it were not for this feature I'd probably release
> > > > a test version for Planet CCRMA. 
> > > 
> > > Happens this shutdown/suspend problem every time or is this sporadic ?
> > 
> > For me it is repeatable (on both a laptop and a desktop machine so it
> > does not appear to be very hardware specific). It might be of course an
> > interaction with the Fedora patches I use. 
> > 
> > In the category of "I wish I had a crystal ball" reports with no hard
> > data, I can confirm that my build of rt4 does hang. I was trying
> > 2.6.29.1-rt4 during a rehearsal for a concert yesterday[*] and after a
> > hard hang I reverted to the vanilla Fedora kernel (which is what I had
> > been using because of that problem - no clues left behind in logs). 
> 
> Hmm. Can you upload your full patch queue and the binary rpm so I can
> give it a test ride ?

Sure, no problem. I just did a release to planetcore-testing repo (with
a warning to the planetccrma list), you can find it here:

http://ccrma.stanford.edu/planetccrma/mirror/fedora/linux/planetcore/testing/10/i386/repoview/index.html
http://ccrma.stanford.edu/planetccrma/mirror/fedora/linux/planetcore/testing/10/x86_64/repoview/index.html

(the one I have tested and hangs is the i386 PAE version)
Source here:

http://ccrma.stanford.edu/planetccrma/mirror/fedora/linux/planetcore/testing/10/SRPMS/

(if you don't want to figure out the .src.rpm - I would not blame you -
I can give you a list of the patches that were actually applied - of the
ones that are included in the package)

-- Fernando



^ permalink raw reply	[flat|nested] 359+ messages in thread

* Re: [Announce] 2.6.29.1-rt4
  2009-04-05 23:10                                   ` Fernando Lopez-Lezcano
@ 2009-04-06 19:54                                     ` Thomas Gleixner
  2009-04-07 16:52                                       ` Fernando Lopez-Lezcano
  0 siblings, 1 reply; 359+ messages in thread
From: Thomas Gleixner @ 2009-04-06 19:54 UTC (permalink / raw)
  To: Fernando Lopez-Lezcano
  Cc: LKML, rt-users, Ingo Molnar, Steven Rostedt, Peter Zijlstra,
	Carsten Emde, Clark Williams, Frank Rowand, Robin Gareus,
	Gregory Haskins, Philippe Reynes, Will Schmidt

Fernando,

On Sun, 5 Apr 2009, Fernando Lopez-Lezcano wrote:
> > Hmm. Can you upload your full patch queue and the binary rpm so I can
> > give it a test ride ?
> 
> Sure, no problem. I just did a release to planetcore-testing repo (with
> a warning to the planetccrma list), you can find it here:
> 
> http://ccrma.stanford.edu/planetccrma/mirror/fedora/linux/planetcore/testing/10/i386/repoview/index.html
> http://ccrma.stanford.edu/planetccrma/mirror/fedora/linux/planetcore/testing/10/x86_64/repoview/index.html
> 
> (the one I have tested and hangs is the i386 PAE version)
> Source here:
> 
> http://ccrma.stanford.edu/planetccrma/mirror/fedora/linux/planetcore/testing/10/SRPMS/
> 
> (if you don't want to figure out the .src.rpm - I would not blame you -
> I can give you a list of the patches that were actually applied - of the
> ones that are included in the package)

No problem. I know how to distangle those beasts.

Still I have no reproducer yet. One of my 32bit test machines survived
a 200 cycle test w/o showing it.

Is there anything special what you run, load ... ?

Looks like I need to add a 32bit install to my T61 in the hope to
reproduce.

Thanks,

	tglx

^ permalink raw reply	[flat|nested] 359+ messages in thread

* Re: [Announce] 2.6.29.1-rt4
  2009-04-06 19:54                                     ` Thomas Gleixner
@ 2009-04-07 16:52                                       ` Fernando Lopez-Lezcano
  2009-04-07 16:58                                         ` Thomas Gleixner
  2009-04-07 17:14                                         ` Fernando Lopez-Lezcano
  0 siblings, 2 replies; 359+ messages in thread
From: Fernando Lopez-Lezcano @ 2009-04-07 16:52 UTC (permalink / raw)
  To: Thomas Gleixner
  Cc: nando, LKML, rt-users, Ingo Molnar, Steven Rostedt,
	Peter Zijlstra, Carsten Emde, Clark Williams, Frank Rowand,
	Robin Gareus, Gregory Haskins, Philippe Reynes, Will Schmidt

On Mon, 2009-04-06 at 21:54 +0200, Thomas Gleixner wrote:
> Fernando,
> 
> On Sun, 5 Apr 2009, Fernando Lopez-Lezcano wrote:
> > > Hmm. Can you upload your full patch queue and the binary rpm so I can
> > > give it a test ride ?
> > 
> > Sure, no problem. I just did a release to planetcore-testing repo (with
> > a warning to the planetccrma list), you can find it here:
> > 
> > http://ccrma.stanford.edu/planetccrma/mirror/fedora/linux/planetcore/testing/10/i386/repoview/index.html
> > http://ccrma.stanford.edu/planetccrma/mirror/fedora/linux/planetcore/testing/10/x86_64/repoview/index.html
> > 
> > (the one I have tested and hangs is the i386 PAE version)
> > Source here:
> > 
> > http://ccrma.stanford.edu/planetccrma/mirror/fedora/linux/planetcore/testing/10/SRPMS/
> > 
> > (if you don't want to figure out the .src.rpm - I would not blame you -
> > I can give you a list of the patches that were actually applied - of the
> > ones that are included in the package)
> 
> No problem. I know how to distangle those beasts.
> 
> Still I have no reproducer yet. One of my 32bit test machines survived
> a 200 cycle test w/o showing it.

Arghh, I don't know what it could be then. You mean 200 power cycles??
Wow... it only takes one here. Thanks for testing. 

> Is there anything special what you run, load ... ?

Not that I can think of right now. This happens on 32 bit installs on
both Fedora 9 and Fedora 10. Nothing special installed, of course I have
the Planet CCRMA packages but they don't involve additional kernel
modules or anything that (I think) deals with startup or shutdown. 

> Looks like I need to add a 32bit install to my T61 in the hope to
> reproduce.

Sorry for the inconvenience. Additional installs, argh (BTW, I won't be
reading email for at least a week, of to LAC2009 tomorrow with a week of
R&R before - please keep cc'ing me on rt stuff). 

Thanks!!!
-- Fernando



^ permalink raw reply	[flat|nested] 359+ messages in thread

* Re: [Announce] 2.6.29.1-rt4
  2009-04-07 16:52                                       ` Fernando Lopez-Lezcano
@ 2009-04-07 16:58                                         ` Thomas Gleixner
  2009-04-07 18:13                                           ` Fernando Lopez-Lezcano
  2009-04-07 17:14                                         ` Fernando Lopez-Lezcano
  1 sibling, 1 reply; 359+ messages in thread
From: Thomas Gleixner @ 2009-04-07 16:58 UTC (permalink / raw)
  To: Fernando Lopez-Lezcano
  Cc: LKML, rt-users, Ingo Molnar, Steven Rostedt, Peter Zijlstra,
	Carsten Emde, Clark Williams, Frank Rowand, Robin Gareus,
	Gregory Haskins, Philippe Reynes, Will Schmidt

Fernando,

On Tue, 7 Apr 2009, Fernando Lopez-Lezcano wrote:

> On Mon, 2009-04-06 at 21:54 +0200, Thomas Gleixner wrote:
> > Fernando,
> > 
> > On Sun, 5 Apr 2009, Fernando Lopez-Lezcano wrote:
> > > > Hmm. Can you upload your full patch queue and the binary rpm so I can
> > > > give it a test ride ?
> > > 
> > > Sure, no problem. I just did a release to planetcore-testing repo (with
> > > a warning to the planetccrma list), you can find it here:
> > > 
> > > http://ccrma.stanford.edu/planetccrma/mirror/fedora/linux/planetcore/testing/10/i386/repoview/index.html
> > > http://ccrma.stanford.edu/planetccrma/mirror/fedora/linux/planetcore/testing/10/x86_64/repoview/index.html
> > > 
> > > (the one I have tested and hangs is the i386 PAE version)
> > > Source here:
> > > 
> > > http://ccrma.stanford.edu/planetccrma/mirror/fedora/linux/planetcore/testing/10/SRPMS/
> > > 
> > > (if you don't want to figure out the .src.rpm - I would not blame you -
> > > I can give you a list of the patches that were actually applied - of the
> > > ones that are included in the package)
> > 
> > No problem. I know how to distangle those beasts.
> > 
> > Still I have no reproducer yet. One of my 32bit test machines survived
> > a 200 cycle test w/o showing it.
> 
> Arghh, I don't know what it could be then. You mean 200 power cycles??
> Wow... it only takes one here. Thanks for testing. 

Does it trigger when you just boot up and the immediately shut down
w/o doing any work on it ?

Could you try whether the following triggers the bug as well: Boot up,
do work or whatever. Make sure your data is sycned to disk. :)

# echo 0 >/sys/devices/system/cpu/cpu1/online

If that does not trigger, then check whether it survives the
shutdown/reboot. If it does we look further.
 
> > Is there anything special what you run, load ... ?
> 
> Not that I can think of right now. This happens on 32 bit installs on
> both Fedora 9 and Fedora 10. Nothing special installed, of course I have
> the Planet CCRMA packages but they don't involve additional kernel
> modules or anything that (I think) deals with startup or shutdown. 

Can you provide the list of modules loaded ?

Thanks,

	tglx

^ permalink raw reply	[flat|nested] 359+ messages in thread

* Re: [Announce] 2.6.29.1-rt4
  2009-04-07 16:52                                       ` Fernando Lopez-Lezcano
  2009-04-07 16:58                                         ` Thomas Gleixner
@ 2009-04-07 17:14                                         ` Fernando Lopez-Lezcano
  1 sibling, 0 replies; 359+ messages in thread
From: Fernando Lopez-Lezcano @ 2009-04-07 17:14 UTC (permalink / raw)
  To: Thomas Gleixner
  Cc: nando, LKML, rt-users, Ingo Molnar, Steven Rostedt,
	Peter Zijlstra, Carsten Emde, Clark Williams, Frank Rowand,
	Robin Gareus, Gregory Haskins, Philippe Reynes, Will Schmidt

On Tue, 2009-04-07 at 09:52 -0700, Fernando Lopez-Lezcano wrote:
> On Mon, 2009-04-06 at 21:54 +0200, Thomas Gleixner wrote:
> > Fernando,
> > 
> > On Sun, 5 Apr 2009, Fernando Lopez-Lezcano wrote:
> > > > Hmm. Can you upload your full patch queue and the binary rpm so I can
> > > > give it a test ride ?
> > > 
> > > Sure, no problem. I just did a release to planetcore-testing repo (with
> > > a warning to the planetccrma list)
> > 
> > No problem. I know how to distangle those beasts.
> > 
> > Still I have no reproducer yet. One of my 32bit test machines survived
> > a 200 cycle test w/o showing it.
> 
> Arghh, I don't know what it could be then. You mean 200 power cycles??
> Wow... it only takes one here. Thanks for testing. 
> 
> > Is there anything special what you run, load ... ?
> 
> Not that I can think of right now. This happens on 32 bit installs on
> both Fedora 9 and Fedora 10. Nothing special installed, of course I have
> the Planet CCRMA packages but they don't involve additional kernel
> modules or anything that (I think) deals with startup or shutdown. 

Maybe I am a special case, somehow:

-------- Forwarded Message --------
From: Timo Sivula
To: planetccrma@ccrma.Stanford.EDU
Subject: Re: [PlanetCCRMA] for brave users only, kernel 2.6.29.1-rt4 for
fc10
Date: Tue, 07 Apr 2009 12:46:41 +0300

ma, 2009-04-06 kello 12:00 -0700, planetccrma-request@ccrma.Stanford.EDU
kirjoitti:

> I just pushed a new build of 2.6.29.1-rt4 (Thomas Gleixner, one of the
> gurus working on the rt patches would like to give it a whirl and the
> easiest way is to put it in planetcore-testing) even though it is not
> "stable" for me. 

Starts and closes fine here with my system. Also has not made my mouse
slow, yet. However, neither ndiswrapper 1.53 nor 1.54 does compile with
this kernel.




^ permalink raw reply	[flat|nested] 359+ messages in thread

* Re: [Announce] 2.6.29.1-rt4
  2009-04-07 16:58                                         ` Thomas Gleixner
@ 2009-04-07 18:13                                           ` Fernando Lopez-Lezcano
  0 siblings, 0 replies; 359+ messages in thread
From: Fernando Lopez-Lezcano @ 2009-04-07 18:13 UTC (permalink / raw)
  To: Thomas Gleixner
  Cc: nando, LKML, rt-users, Ingo Molnar, Steven Rostedt,
	Peter Zijlstra, Carsten Emde, Clark Williams, Frank Rowand,
	Robin Gareus, Gregory Haskins, Philippe Reynes, Will Schmidt

[-- Attachment #1: Type: text/plain, Size: 3098 bytes --]

On Tue, 2009-04-07 at 18:58 +0200, Thomas Gleixner wrote:
> Fernando,
> 
> On Tue, 7 Apr 2009, Fernando Lopez-Lezcano wrote:
> 
> > On Mon, 2009-04-06 at 21:54 +0200, Thomas Gleixner wrote:
> > > Fernando,
> > > 
> > > On Sun, 5 Apr 2009, Fernando Lopez-Lezcano wrote:
> > > > > Hmm. Can you upload your full patch queue and the binary rpm so I can
> > > > > give it a test ride ?
> > > > 
> > > > Sure, no problem. I just did a release to planetcore-testing repo (with
> > > > a warning to the planetccrma list), you can find it here:
> > > > 
> > > > http://ccrma.stanford.edu/planetccrma/mirror/fedora/linux/planetcore/testing/10/i386/repoview/index.html
> > > > http://ccrma.stanford.edu/planetccrma/mirror/fedora/linux/planetcore/testing/10/x86_64/repoview/index.html
> > > > 
> > > > (the one I have tested and hangs is the i386 PAE version)
> > > > Source here:
> > > > 
> > > > http://ccrma.stanford.edu/planetccrma/mirror/fedora/linux/planetcore/testing/10/SRPMS/
> > > > 
> > > > (if you don't want to figure out the .src.rpm - I would not blame you -
> > > > I can give you a list of the patches that were actually applied - of the
> > > > ones that are included in the package)
> > > 
> > > No problem. I know how to distangle those beasts.
> > > 
> > > Still I have no reproducer yet. One of my 32bit test machines survived
> > > a 200 cycle test w/o showing it.
> > 
> > Arghh, I don't know what it could be then. You mean 200 power cycles??
> > Wow... it only takes one here. Thanks for testing. 
> 
> Does it trigger when you just boot up and the immediately shut down
> w/o doing any work on it ?

Yes. Just tried again. Clarification: triggers on a "halt -p", _not_ on
a reboot. 

> Could you try whether the following triggers the bug as well: Boot up,
> do work or whatever. Make sure your data is sycned to disk. :)
> 
> # echo 0 >/sys/devices/system/cpu/cpu1/online
> 
> If that does not trigger, then check whether it survives the
> shutdown/reboot. If it does we look further.

It triggers it immediately (in my laptop), I tried from a text console
and it spews things and at the bottom a poke_text thing like before
(after a while I got a couple of messages from iwl3945 about a timeout
and somehow it started to reboot, either when I pressed the power button
or when I did <ctrl><alt><del>)

> > > Is there anything special what you run, load ... ?
> > 
> > Not that I can think of right now. This happens on 32 bit installs on
> > both Fedora 9 and Fedora 10. Nothing special installed, of course I have
> > the Planet CCRMA packages but they don't involve additional kernel
> > modules or anything that (I think) deals with startup or shutdown. 
> 
> Can you provide the list of modules loaded ?

Three lists attached, first all modules after I login, then modules
after a single user boot and then two more after I removed bluetooth and
80211* modules on a hunch, fails to power off in all cases (I first saw
a ref to blue something at the very top of the dump, so removed that,
then saw a reference to 80211 at the top, removed that, then I gave
up :-) 

-- Fernando


[-- Attachment #2: lsmod.multi --]
[-- Type: text/plain, Size: 2792 bytes --]

Module                  Size  Used by
fuse                   47992  2 
i915                  131684  2 
drm                   122684  3 i915
i2c_algo_bit            4676  1 i915
rfcomm                 30904  4 
bridge                 40532  0 
stp                     1884  1 bridge
bnep                   10788  2 
sco                     8924  2 
l2cap                  17584  16 rfcomm,bnep
sunrpc                152904  1 
ip6t_REJECT             3148  2 
nf_conntrack_ipv6      11064  2 
ip6table_filter         2164  1 
ip6_tables             10632  1 ip6table_filter
ipv6                  235136  22 ip6t_REJECT,nf_conntrack_ipv6
cpufreq_ondemand        5916  2 
acpi_cpufreq            8304  0 
dm_multipath           13836  0 
uinput                  6748  0 
snd_hda_codec_analog    54824  1 
snd_hda_intel          23716  3 
snd_hda_codec          53840  2 snd_hda_codec_analog,snd_hda_intel
snd_hwdep               6584  1 snd_hda_codec
snd_seq_dummy           2456  0 
arc4                    1532  2 
snd_seq_oss            27444  0 
snd_seq_midi_event      5596  1 snd_seq_oss
snd_seq                45620  5 snd_seq_dummy,snd_seq_oss,snd_seq_midi_event
snd_seq_device          5980  3 snd_seq_dummy,snd_seq_oss,snd_seq
snd_pcm_oss            38504  0 
thinkpad_acpi          52544  0 
hwmon                   2160  1 thinkpad_acpi
snd_mixer_oss          14360  1 snd_pcm_oss
snd_pcm                62088  3 snd_hda_intel,snd_hda_codec,snd_pcm_oss
sdhci_pci               6484  0 
sdhci                  14428  1 sdhci_pci
ecb                     2348  2 
pcspkr                  2080  0 
i2c_i801                8176  0 
i2c_core               17828  4 i915,drm,i2c_algo_bit,i2c_i801
iTCO_wdt               10284  0 
yenta_socket           21404  1 
mmc_core               40752  1 sdhci
iwl3945               123748  0 
rfkill                  8668  4 thinkpad_acpi,iwl3945
mac80211              167760  1 iwl3945
iTCO_vendor_support     2660  1 iTCO_wdt
rsrc_nonstatic         10192  1 yenta_socket
snd_timer              17924  2 snd_seq,snd_pcm
ohci1394               26208  0 
lib80211                4992  1 iwl3945
joydev                  9080  0 
snd                    50516  18 snd_hda_codec_analog,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_seq_dummy,snd_seq_oss,snd_seq,snd_seq_device,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer
cfg80211               31272  2 iwl3945,mac80211
soundcore               5476  1 snd
snd_page_alloc          7652  2 snd_hda_intel,snd_pcm
ricoh_mmc               3360  0 
btusb                  10716  3 
bluetooth              45472  11 rfcomm,bnep,sco,l2cap,btusb
video                  17132  0 
output                  2436  1 video
e1000e                100600  0 
ata_generic             4240  0 
pata_acpi               3524  0 

[-- Attachment #3: lsmod.single --]
[-- Type: text/plain, Size: 2082 bytes --]

Module                  Size  Used by
dm_multipath           13836  0 
uinput                  6748  0 
snd_hda_codec_analog    54824  1 
snd_hda_intel          23716  0 
snd_hda_codec          53840  2 snd_hda_codec_analog,snd_hda_intel
snd_hwdep               6584  1 snd_hda_codec
arc4                    1532  2 
snd_seq_dummy           2456  0 
snd_seq_oss            27444  0 
snd_seq_midi_event      5596  1 snd_seq_oss
snd_seq                45620  5 snd_seq_dummy,snd_seq_oss,snd_seq_midi_event
ecb                     2348  2 
snd_seq_device          5980  3 snd_seq_dummy,snd_seq_oss,snd_seq
iwl3945               123748  0 
thinkpad_acpi          52544  0 
snd_pcm_oss            38504  0 
snd_mixer_oss          14360  1 snd_pcm_oss
snd_pcm                62088  3 snd_hda_intel,snd_hda_codec,snd_pcm_oss
sdhci_pci               6484  0 
i2c_i801                8176  0 
hwmon                   2160  1 thinkpad_acpi
rfkill                  8668  4 iwl3945,thinkpad_acpi
yenta_socket           21404  1 
sdhci                  14428  1 sdhci_pci
ohci1394               26208  0 
rsrc_nonstatic         10192  1 yenta_socket
ricoh_mmc               3360  0 
mmc_core               40752  1 sdhci
pcspkr                  2080  0 
i2c_core               17828  1 i2c_i801
mac80211              167760  1 iwl3945
video                  17132  0 
snd_timer              17924  2 snd_seq,snd_pcm
iTCO_wdt               10284  0 
joydev                  9080  0 
snd                    50516  12 snd_hda_codec_analog,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_seq_dummy,snd_seq_oss,snd_seq,snd_seq_device,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer
btusb                  10716  0 
iTCO_vendor_support     2660  1 iTCO_wdt
e1000e                100600  0 
soundcore               5476  1 snd
lib80211                4992  1 iwl3945
output                  2436  1 video
snd_page_alloc          7652  2 snd_hda_intel,snd_pcm
cfg80211               31272  2 iwl3945,mac80211
bluetooth              45472  1 btusb
ata_generic             4240  0 
pata_acpi               3524  0 

[-- Attachment #4: lsmod.single.noblue --]
[-- Type: text/plain, Size: 2011 bytes --]

Module                  Size  Used by
dm_multipath           13836  0 
uinput                  6748  0 
snd_hda_codec_analog    54824  1 
snd_hda_intel          23716  0 
snd_hda_codec          53840  2 snd_hda_codec_analog,snd_hda_intel
snd_hwdep               6584  1 snd_hda_codec
snd_seq_dummy           2456  0 
snd_seq_oss            27444  0 
arc4                    1532  2 
snd_seq_midi_event      5596  1 snd_seq_oss
ecb                     2348  2 
snd_seq                45620  5 snd_seq_dummy,snd_seq_oss,snd_seq_midi_event
snd_seq_device          5980  3 snd_seq_dummy,snd_seq_oss,snd_seq
thinkpad_acpi          52544  0 
iwl3945               123748  0 
snd_pcm_oss            38504  0 
hwmon                   2160  1 thinkpad_acpi
sdhci_pci               6484  0 
snd_mixer_oss          14360  1 snd_pcm_oss
i2c_i801                8176  0 
sdhci                  14428  1 sdhci_pci
ohci1394               26208  0 
rfkill                  8668  4 thinkpad_acpi,iwl3945
yenta_socket           21404  1 
mmc_core               40752  1 sdhci
snd_pcm                62088  3 snd_hda_intel,snd_hda_codec,snd_pcm_oss
rsrc_nonstatic         10192  1 yenta_socket
pcspkr                  2080  0 
ricoh_mmc               3360  0 
i2c_core               17828  1 i2c_i801
mac80211              167760  1 iwl3945
iTCO_wdt               10284  0 
joydev                  9080  0 
video                  17132  0 
snd_timer              17924  2 snd_seq,snd_pcm
iTCO_vendor_support     2660  1 iTCO_wdt
snd                    50516  12 snd_hda_codec_analog,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_seq_dummy,snd_seq_oss,snd_seq,snd_seq_device,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer
e1000e                100600  0 
lib80211                4992  1 iwl3945
soundcore               5476  1 snd
cfg80211               31272  2 iwl3945,mac80211
output                  2436  1 video
snd_page_alloc          7652  2 snd_hda_intel,snd_pcm
ata_generic             4240  0 
pata_acpi               3524  0 

[-- Attachment #5: lsmod.single.no80211 --]
[-- Type: text/plain, Size: 1841 bytes --]

Module                  Size  Used by
dm_multipath           13836  0 
uinput                  6748  0 
snd_hda_codec_analog    54824  1 
snd_hda_intel          23716  0 
snd_hda_codec          53840  2 snd_hda_codec_analog,snd_hda_intel
snd_hwdep               6584  1 snd_hda_codec
arc4                    1532  0 
snd_seq_dummy           2456  0 
snd_seq_oss            27444  0 
ecb                     2348  0 
snd_seq_midi_event      5596  1 snd_seq_oss
snd_seq                45620  5 snd_seq_dummy,snd_seq_oss,snd_seq_midi_event
snd_seq_device          5980  3 snd_seq_dummy,snd_seq_oss,snd_seq
thinkpad_acpi          52544  0 
snd_pcm_oss            38504  0 
rfkill                  8668  2 thinkpad_acpi
hwmon                   2160  1 thinkpad_acpi
snd_mixer_oss          14360  1 snd_pcm_oss
pcspkr                  2080  0 
sdhci_pci               6484  0 
i2c_i801                8176  0 
sdhci                  14428  1 sdhci_pci
snd_pcm                62088  3 snd_hda_intel,snd_hda_codec,snd_pcm_oss
yenta_socket           21404  1 
ohci1394               26208  0 
mmc_core               40752  1 sdhci
joydev                  9080  0 
rsrc_nonstatic         10192  1 yenta_socket
i2c_core               17828  1 i2c_i801
ricoh_mmc               3360  0 
iTCO_wdt               10284  0 
snd_timer              17924  2 snd_seq,snd_pcm
video                  17132  0 
snd                    50516  12 snd_hda_codec_analog,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_seq_dummy,snd_seq_oss,snd_seq,snd_seq_device,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer
iTCO_vendor_support     2660  1 iTCO_wdt
e1000e                100600  0 
output                  2436  1 video
soundcore               5476  1 snd
snd_page_alloc          7652  2 snd_hda_intel,snd_pcm
ata_generic             4240  0 
pata_acpi               3524  0 

^ permalink raw reply	[flat|nested] 359+ messages in thread

* [Announce] 2.6.29.1-rt5
  2009-04-03 17:21                     ` [Announce] 2.6.29.1-rt4 Thomas Gleixner
  2009-04-03 23:04                       ` Fernando Lopez-Lezcano
  2009-04-05  3:28                         ` GeunSik Lim
@ 2009-04-08 17:49                       ` Thomas Gleixner
  2009-04-09 18:53                         ` [Announce] 2.6.29.1-rt6 Thomas Gleixner
  2 siblings, 1 reply; 359+ messages in thread
From: Thomas Gleixner @ 2009-04-08 17:49 UTC (permalink / raw)
  To: LKML
  Cc: rt-users, Ingo Molnar, Steven Rostedt, Peter Zijlstra,
	Carsten Emde, Clark Williams, Frank Rowand, Robin Gareus,
	Gregory Haskins, Philippe Reynes, Fernando Lopez-Lezcano,
	Will Schmidt, Darren Hart

We are pleased to announce the next update to our new preempt-rt
series.
   
 	- include the futex rework + requeue_pi support (Darren Hart)

The futex changes need profound testing. As we know from prior futex
work the best stress tests for the futex interface are RT-Java-VMs
especially with enterprise work loads on larger machines. Can the
folks who have access to such monstrosities please unleash the beasts
and give the futex code a good work out ? Please tell your sysadmin
upfront that he should be stand by to fix up the resulting wreckage
which might vary from harmless to system replacement.

Unfortunately I was not able to track down the weird 32bit PAE
shutdown crash, so the affected users need to stick to the
nosmp-alternatives work around for now.

Download locations:
  
     http://rt.et.redhat.com/download/
     http://www.kernel.org/pub/linux/kernel/projects/rt/
   
Information on the RT patch can be found at:
 
     http://rt.wiki.kernel.org/index.php/Main_Page
 
to build the 2.6.29.1-rt5 tree, the following patches should be
applied:
 
     http://www.kernel.org/pub/linux/kernel/v2.6/linux-2.6.29.1.tar.bz2
     http://www.kernel.org/pub/linux/kernel/projects/rt/patch-2.6.29.1-rt5.bz2
 
The broken out patches are also available at the same download
locations.
 
Enjoy !

       tglx

^ permalink raw reply	[flat|nested] 359+ messages in thread

* [Announce] 2.6.29.1-rt6
  2009-04-08 17:49                       ` [Announce] 2.6.29.1-rt5 Thomas Gleixner
@ 2009-04-09 18:53                         ` Thomas Gleixner
  2009-04-10  8:12                             ` GeunSik Lim
  2009-04-10 22:05                           ` [Announce] 2.6.29.1-rt7 Thomas Gleixner
  0 siblings, 2 replies; 359+ messages in thread
From: Thomas Gleixner @ 2009-04-09 18:53 UTC (permalink / raw)
  To: LKML
  Cc: rt-users, Ingo Molnar, Steven Rostedt, Peter Zijlstra,
	Carsten Emde, Clark Williams, Frank Rowand, Robin Gareus,
	Gregory Haskins, Philippe Reynes, Fernando Lopez-Lezcano,
	Will Schmidt, Darren Hart, Jan Blunck

We are pleased to announce the next update to our new preempt-rt
series.

  	- rt locks fixes (Jan Blunck, tglx)
	- kvm vs. -rt fixes (Jan Blunck)
	- hpet interrupt fix (tglx, reported and tested by Hans Peter Bock)

Download locations:

     http://rt.et.redhat.com/download/
     http://www.kernel.org/pub/linux/kernel/projects/rt/

Information on the RT patch can be found at:

     http://rt.wiki.kernel.org/index.php/Main_Page

to build the 2.6.29.1-rt6 tree, the following patches should be
applied:

     http://www.kernel.org/pub/linux/kernel/v2.6/linux-2.6.29.1.tar.bz2
     http://www.kernel.org/pub/linux/kernel/projects/rt/patch-2.6.29.1-rt6.bz2

The broken out patches are also available at the same download
locations.

Enjoy !

       tglx


^ permalink raw reply	[flat|nested] 359+ messages in thread

* Re: [Announce] 2.6.29.1-rt6
  2009-04-09 18:53                         ` [Announce] 2.6.29.1-rt6 Thomas Gleixner
@ 2009-04-10  8:12                             ` GeunSik Lim
  2009-04-10 22:05                           ` [Announce] 2.6.29.1-rt7 Thomas Gleixner
  1 sibling, 0 replies; 359+ messages in thread
From: GeunSik Lim @ 2009-04-10  8:12 UTC (permalink / raw)
  To: Thomas Gleixner
  Cc: LKML, rt-users, Ingo Molnar, Steven Rostedt, Peter Zijlstra,
	Carsten Emde, Clark Williams, Frank Rowand, Robin Gareus,
	Gregory Haskins, Philippe Reynes, Fernando Lopez-Lezcano,
	Will Schmidt, Darren Hart, Jan Blunck

Dear Thomas

Thank you for your notice about new rt patch.
I am running linux-2.6.29.1-rt6  on Q9300 with fedora 9 distribution
normally like belows. So I changed version from linux-2.6.29-rt2 to
linux-2.6.29.1-rt6.
I will test about  a various case with linux-2.6.29.1-rt6 version.

[invain@fedora9 invain]$ uname -a
Linux fedora9 2.6.29.1-rt6-lgs #1 SMP PREEMPT RT Fri Apr 10 10:02:20
KST 2009 i686 i686 i386 GNU/Linux
[invain@fedora9 invain]$ cat /proc/cpuinfo
processor	: 0
vendor_id	: GenuineIntel
cpu family	: 6
model		: 23
model name	: Intel(R) Core(TM)2 Quad  CPU   Q9300  @ 2.50GHz
stepping	: 7
cpu MHz		: 2494.087
cache size	: 3072 KB
physical id	: 0
siblings	: 1
core id		: 0
cpu cores	: 4
apicid		: 0
initial apicid	: 0
fdiv_bug	: no
hlt_bug		: no
f00f_bug	: no
coma_bug	: no
fpu		: yes
fpu_exception	: yes
cpuid level	: 10
wp		: yes
flags		: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov
pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe lm
constant_tsc arch_perfmon pebs bts pni dtes64 monitor ds_cpl vmx smx
est tm2 ssse3 cx16 xtpr pdcm sse4_1 lahf_lm tpr_shadow vnmi
flexpriority
bogomips	: 4988.17
clflush size	: 64
power management:

processor	: 1
vendor_id	: GenuineIntel
cpu family	: 6
model		: 23
model name	: Intel(R) Core(TM)2 Quad  CPU   Q9300  @ 2.50GHz
stepping	: 7
cpu MHz		: 2494.087
cache size	: 3072 KB
physical id	: 0
siblings	: 1
core id		: 1
cpu cores	: 4
apicid		: 1
initial apicid	: 1
fdiv_bug	: no
hlt_bug		: no
f00f_bug	: no
coma_bug	: no
fpu		: yes
fpu_exception	: yes
cpuid level	: 10
wp		: yes
flags		: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov
pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe lm
constant_tsc arch_perfmon pebs bts pni dtes64 monitor ds_cpl vmx smx
est tm2 ssse3 cx16 xtpr pdcm sse4_1 lahf_lm tpr_shadow vnmi
flexpriority
bogomips	: 4987.23
clflush size	: 64
power management:

processor	: 2
vendor_id	: GenuineIntel
cpu family	: 6
model		: 23
model name	: Intel(R) Core(TM)2 Quad  CPU   Q9300  @ 2.50GHz
stepping	: 7
cpu MHz		: 2494.087
cache size	: 3072 KB
physical id	: 0
siblings	: 1
core id		: 2
cpu cores	: 4
apicid		: 2
initial apicid	: 2
fdiv_bug	: no
hlt_bug		: no
f00f_bug	: no
coma_bug	: no
fpu		: yes
fpu_exception	: yes
cpuid level	: 10
wp		: yes
flags		: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov
pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe lm
constant_tsc arch_perfmon pebs bts pni dtes64 monitor ds_cpl vmx smx
est tm2 ssse3 cx16 xtpr pdcm sse4_1 lahf_lm tpr_shadow vnmi
flexpriority
bogomips	: 4987.24
clflush size	: 64
power management:

processor	: 3
vendor_id	: GenuineIntel
cpu family	: 6
model		: 23
model name	: Intel(R) Core(TM)2 Quad  CPU   Q9300  @ 2.50GHz
stepping	: 7
cpu MHz		: 2494.087
cache size	: 3072 KB
physical id	: 0
siblings	: 1
core id		: 3
cpu cores	: 4
apicid		: 3
initial apicid	: 3
fdiv_bug	: no
hlt_bug		: no
f00f_bug	: no
coma_bug	: no
fpu		: yes
fpu_exception	: yes
cpuid level	: 10
wp		: yes
flags		: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov
pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe lm
constant_tsc arch_perfmon pebs bts pni dtes64 monitor ds_cpl vmx smx
est tm2 ssse3 cx16 xtpr pdcm sse4_1 lahf_lm tpr_shadow vnmi
flexpriority
bogomips	: 4987.28
clflush size	: 64
power management:

[invain@fedora9 invain]$ cat /proc/meminfo
MemTotal:        3075816 kB
MemFree:          904416 kB
Buffers:          196168 kB
Cached:          1573864 kB
SwapCached:            0 kB
Active:          1079948 kB
Inactive:         990804 kB
Active(anon):     313180 kB
Inactive(anon):        0 kB
Active(file):     766768 kB
Inactive(file):   990804 kB
Unevictable:        2468 kB
Mlocked:            2468 kB
HighTotal:       2222408 kB
HighFree:         327460 kB
LowTotal:         853408 kB
LowFree:          576956 kB
SwapTotal:             0 kB
SwapFree:              0 kB
Dirty:               300 kB
Writeback:             0 kB
AnonPages:        303200 kB
Mapped:            86460 kB
Slab:              65668 kB
SReclaimable:      51816 kB
SUnreclaim:        13852 kB
PageTables:         4568 kB
NFS_Unstable:          0 kB
Bounce:                0 kB
WritebackTmp:          0 kB
CommitLimit:     1537908 kB
Committed_AS:     719312 kB
VmallocTotal:     122880 kB
VmallocUsed:       45324 kB
VmallocChunk:      50164 kB
HugePages_Total:       0
HugePages_Free:        0
HugePages_Rsvd:        0
HugePages_Surp:        0
Hugepagesize:       4096 kB
DirectMap4k:       81912 kB
DirectMap4M:      823296 kB
[invain@fedora9 invain]$ sudo lspci
[sudo] password for invain:
00:00.0 Host bridge: Intel Corporation 82Q35 Express DRAM Controller (rev 02)
00:01.0 PCI bridge: Intel Corporation 82Q35 Express PCI Express Root
Port (rev 02)
00:03.0 Communication controller: Intel Corporation 82Q35 Express MEI
Controller (rev 02)
00:03.2 IDE interface: Intel Corporation 82Q35 Express PT IDER
Controller (rev 02)
00:03.3 Serial controller: Intel Corporation 82Q35 Express Serial KT
Controller (rev 02)
00:19.0 Ethernet controller: Intel Corporation 82566DM-2 Gigabit
Network Connection (rev 02)
00:1a.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB
UHCI Controller #4 (rev 02)
00:1a.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB
UHCI Controller #5 (rev 02)
00:1a.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB
UHCI Controller #6 (rev 02)
00:1a.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2
EHCI Controller #2 (rev 02)
00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio
Controller (rev 02)
00:1d.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB
UHCI Controller #1 (rev 02)
00:1d.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB
UHCI Controller #2 (rev 02)
00:1d.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB
UHCI Controller #3 (rev 02)
00:1d.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2
EHCI Controller #1 (rev 02)
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 92)
00:1f.0 ISA bridge: Intel Corporation 82801IO (ICH9DO) LPC Interface
Controller (rev 02)
00:1f.2 IDE interface: Intel Corporation 82801IR/IO/IH (ICH9R/DO/DH) 4
port SATA IDE Controller (rev 02)
00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev 02)
00:1f.5 IDE interface: Intel Corporation 82801I (ICH9 Family) 2 port
SATA IDE Controller (rev 02)
01:00.0 VGA compatible controller: nVidia Corporation GeForce 8500 GT (rev a1)
11:07.0 Ethernet controller: Intel Corporation 82557/8/9/0/1 Ethernet
Pro 100 (rev 10)
[invain@fedora9 invain]$
[invain@fedora9 invain]$
[invain@fedora9 tracing]$

[invain@fedora9 tracing]$ cd /
[invain@fedora9 /]$ ls /debug/tracing/ -al
합계 0
drwxr-xr-x 6 root root 0 2009-04-10 15:09 .
drwxr-xr-x 8 root root 0 2009-04-10 15:09 ..
-rw-r--r-- 1 root root 0 2009-04-10 15:09 README
-r--r--r-- 1 root root 0 2009-04-10 15:09 available_events
-r--r--r-- 1 root root 0 2009-04-10 15:09 available_filter_functions
-r--r--r-- 1 root root 0 2009-04-10 15:09 available_tracers
-rw-r--r-- 1 root root 0 2009-04-10 15:09 buffer_size_kb
-r--r--r-- 1 root root 0 2009-04-10 15:09 current_tracer
-r--r--r-- 1 root root 0 2009-04-10 15:09 dyn_ftrace_total_info
drwxr-xr-x 5 root root 0 2009-04-10 15:09 events
-r--r--r-- 1 root root 0 2009-04-10 15:09 failures
drwxr-xr-x 2 root root 0 2009-04-10 15:09 options
drwxr-xr-x 6 root root 0 2009-04-10 15:09 per_cpu
-r--r--r-- 1 root root 0 2009-04-10 15:09 printk_formats
-rw-r--r-- 1 root root 0 2009-04-10 15:09 set_event
-rw-r--r-- 1 root root 0 2009-04-10 15:09 set_ftrace_filter
-rw-r--r-- 1 root root 0 2009-04-10 15:09 set_ftrace_notrace
-rw-r--r-- 1 root root 0 2009-04-10 15:09 set_ftrace_pid
-r--r--r-- 1 root root 0 2009-04-10 15:09 set_graph_function
-rw-r--r-- 1 root root 0 2009-04-10 15:09 stack_max_size
-r--r--r-- 1 root root 0 2009-04-10 15:09 stack_trace
-rw-r--r-- 1 root root 0 2009-04-10 15:09 sysprof_sample_period
-rw-r--r-- 1 root root 0 2009-04-10 15:09 trace
--w--w---- 1 root root 0 2009-04-10 15:09 trace_marker
-rw-r--r-- 1 root root 0 2009-04-10 15:09 trace_options
-r--r--r-- 1 root root 0 2009-04-10 15:09 trace_pipe
drwxr-xr-x 2 root root 0 2009-04-10 15:09 trace_stat
-rw-r--r-- 1 root root 0 2009-04-10 15:09 tracing_cpumask
-rw-r--r-- 1 root root 0 2009-04-10 15:09 tracing_enabled
-rw-r--r-- 1 root root 0 2009-04-10 15:09 tracing_max_latency
-rw-r--r-- 1 root root 0 2009-04-10 15:09 tracing_on
-rw-r--r-- 1 root root 0 2009-04-10 15:09 tracing_thresh
[invain@fedora9 /]$
[invain@fedora9 /]$
[invain@fedora9 /]$ cat /debug/tracing/available_tracers
syscall blk kmemtrace power branch function_graph mmiotrace wakeup_rt
wakeup irqsoff function sched_switch initcall nop
[invain@fedora9 /]$
[invain@fedora9 tracing]$
[invain@fedora9 tracing]$
[invain@fedora9 tracing]$
[invain@fedora9 tracing]$ sudo cyclictest  -t 10 -b 1000000 --context -D 10
could not set latency_hist/wakeup_latency/reset to 1
0.16 0.20 0.20 1/331 4338

T: 0 ( 4328) P: 0 I:1000 C:   8984 Min:     17 Act:13017 Avg: 8675 Max:   13498
T: 1 ( 4329) P: 0 I:1500 C:   5994 Min:     17 Act: 6048 Avg: 3982 Max:    6190
T: 2 ( 4330) P: 0 I:2000 C:   4498 Min:     17 Act: 2028 Avg: 1196 Max:    2759
T: 3 ( 4331) P: 0 I:2500 C:   3598 Min:     17 Act: 2517 Avg: 1494 Max:    2786
T: 4 ( 4332) P: 0 I:3000 C:   2999 Min:     17 Act:   18 Avg:   25 Max:     514
T: 5 ( 4333) P: 0 I:3500 C:   2571 Min:     17 Act:   18 Avg:   22 Max:     654
T: 6 ( 4334) P: 0 I:4000 C:   2249 Min:     17 Act:   25 Avg:   23 Max:     466
T: 7 ( 4335) P: 0 I:4500 C:   1993 Min:     17 Act:31521 Avg:19809 Max:   33231
T: 8 ( 4336) P: 0 I:5000 C:   1800 Min:     17 Act:   36 Avg:   29 Max:    1095
T: 9 ( 4337) P: 0 I:5500 C:   1636 Min:     17 Act:   29 Avg:   21 Max:     385
[invain@fedora9 tracing]$ tail trace
           gedit-4093  [003] 4154503193.109679:   4093:120:D ==> [003]
 3003:120:R Xorg
            Xorg-3003  [003] 4154503193.109728:   3003:120:D ==> [003]
    0:140:R <idle>
          <idle>-0     [003] 4154503193.110171:      0:140:R   + [003]
 4327:120:D cyclictest
          <idle>-0     [003] 4154503193.110176:      0:140:R ==> [003]
 4327:120:R cyclictest
          <idle>-0     [002] 4154503193.110217:      0:140:R   + [002]
   32: 49:D sirq-timer/2
          <idle>-0     [002] 4154503193.110222:      0:140:R ==> [002]
   32: 49:R sirq-timer/2
    sirq-timer/2-32    [002] 4154503193.110230:     32: 49:D ==> [002]
    0:140:R <idle>
      cyclictest-4327  [003] 4154503193.110344:   4327:120:R   + [003]
   45: 49:D sirq-timer/3
      cyclictest-4327  [003] 4154503193.110349:   4327:120:R ==> [003]
   45: 49:R sirq-timer/3
    sirq-timer/3-45    [003] 4154503193.110355:     45: 49:D ==> [003]
 4327:120:R cyclictest
[invain@fedora9 tracing]$


Regards,
GeunSik Lim.

2009/4/10 Thomas Gleixner <tglx@linutronix.de>:
> We are pleased to announce the next update to our new preempt-rt
> series.
>
>        - rt locks fixes (Jan Blunck, tglx)
>        - kvm vs. -rt fixes (Jan Blunck)
>        - hpet interrupt fix (tglx, reported and tested by Hans Peter Bock)
>
> Download locations:
>
>     http://rt.et.redhat.com/download/
>     http://www.kernel.org/pub/linux/kernel/projects/rt/
>
> Information on the RT patch can be found at:
>
>     http://rt.wiki.kernel.org/index.php/Main_Page
>
> to build the 2.6.29.1-rt6 tree, the following patches should be
> applied:
>
>     http://www.kernel.org/pub/linux/kernel/v2.6/linux-2.6.29.1.tar.bz2
>     http://www.kernel.org/pub/linux/kernel/projects/rt/patch-2.6.29.1-rt6.bz2
>
> The broken out patches are also available at the same download
> locations.
>
> Enjoy !
>
>       tglx
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-rt-users" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
>



-- 
Regards,
GeunSik Lim
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

^ permalink raw reply	[flat|nested] 359+ messages in thread

* Re: [Announce] 2.6.29.1-rt6
@ 2009-04-10  8:12                             ` GeunSik Lim
  0 siblings, 0 replies; 359+ messages in thread
From: GeunSik Lim @ 2009-04-10  8:12 UTC (permalink / raw)
  To: Thomas Gleixner
  Cc: LKML, rt-users, Ingo Molnar, Steven Rostedt, Peter Zijlstra,
	Carsten Emde, Clark Williams, Frank Rowand, Robin Gareus,
	Gregory Haskins, Philippe Reynes, Fernando Lopez-Lezcano,
	Will Schmidt, Darren Hart, Jan Blunck

Dear Thomas

Thank you for your notice about new rt patch.
I am running linux-2.6.29.1-rt6  on Q9300 with fedora 9 distribution
normally like belows. So I changed version from linux-2.6.29-rt2 to
linux-2.6.29.1-rt6.
I will test about  a various case with linux-2.6.29.1-rt6 version.

[invain@fedora9 invain]$ uname -a
Linux fedora9 2.6.29.1-rt6-lgs #1 SMP PREEMPT RT Fri Apr 10 10:02:20
KST 2009 i686 i686 i386 GNU/Linux
[invain@fedora9 invain]$ cat /proc/cpuinfo
processor	: 0
vendor_id	: GenuineIntel
cpu family	: 6
model		: 23
model name	: Intel(R) Core(TM)2 Quad  CPU   Q9300  @ 2.50GHz
stepping	: 7
cpu MHz		: 2494.087
cache size	: 3072 KB
physical id	: 0
siblings	: 1
core id		: 0
cpu cores	: 4
apicid		: 0
initial apicid	: 0
fdiv_bug	: no
hlt_bug		: no
f00f_bug	: no
coma_bug	: no
fpu		: yes
fpu_exception	: yes
cpuid level	: 10
wp		: yes
flags		: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov
pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe lm
constant_tsc arch_perfmon pebs bts pni dtes64 monitor ds_cpl vmx smx
est tm2 ssse3 cx16 xtpr pdcm sse4_1 lahf_lm tpr_shadow vnmi
flexpriority
bogomips	: 4988.17
clflush size	: 64
power management:

processor	: 1
vendor_id	: GenuineIntel
cpu family	: 6
model		: 23
model name	: Intel(R) Core(TM)2 Quad  CPU   Q9300  @ 2.50GHz
stepping	: 7
cpu MHz		: 2494.087
cache size	: 3072 KB
physical id	: 0
siblings	: 1
core id		: 1
cpu cores	: 4
apicid		: 1
initial apicid	: 1
fdiv_bug	: no
hlt_bug		: no
f00f_bug	: no
coma_bug	: no
fpu		: yes
fpu_exception	: yes
cpuid level	: 10
wp		: yes
flags		: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov
pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe lm
constant_tsc arch_perfmon pebs bts pni dtes64 monitor ds_cpl vmx smx
est tm2 ssse3 cx16 xtpr pdcm sse4_1 lahf_lm tpr_shadow vnmi
flexpriority
bogomips	: 4987.23
clflush size	: 64
power management:

processor	: 2
vendor_id	: GenuineIntel
cpu family	: 6
model		: 23
model name	: Intel(R) Core(TM)2 Quad  CPU   Q9300  @ 2.50GHz
stepping	: 7
cpu MHz		: 2494.087
cache size	: 3072 KB
physical id	: 0
siblings	: 1
core id		: 2
cpu cores	: 4
apicid		: 2
initial apicid	: 2
fdiv_bug	: no
hlt_bug		: no
f00f_bug	: no
coma_bug	: no
fpu		: yes
fpu_exception	: yes
cpuid level	: 10
wp		: yes
flags		: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov
pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe lm
constant_tsc arch_perfmon pebs bts pni dtes64 monitor ds_cpl vmx smx
est tm2 ssse3 cx16 xtpr pdcm sse4_1 lahf_lm tpr_shadow vnmi
flexpriority
bogomips	: 4987.24
clflush size	: 64
power management:

processor	: 3
vendor_id	: GenuineIntel
cpu family	: 6
model		: 23
model name	: Intel(R) Core(TM)2 Quad  CPU   Q9300  @ 2.50GHz
stepping	: 7
cpu MHz		: 2494.087
cache size	: 3072 KB
physical id	: 0
siblings	: 1
core id		: 3
cpu cores	: 4
apicid		: 3
initial apicid	: 3
fdiv_bug	: no
hlt_bug		: no
f00f_bug	: no
coma_bug	: no
fpu		: yes
fpu_exception	: yes
cpuid level	: 10
wp		: yes
flags		: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov
pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe lm
constant_tsc arch_perfmon pebs bts pni dtes64 monitor ds_cpl vmx smx
est tm2 ssse3 cx16 xtpr pdcm sse4_1 lahf_lm tpr_shadow vnmi
flexpriority
bogomips	: 4987.28
clflush size	: 64
power management:

[invain@fedora9 invain]$ cat /proc/meminfo
MemTotal:        3075816 kB
MemFree:          904416 kB
Buffers:          196168 kB
Cached:          1573864 kB
SwapCached:            0 kB
Active:          1079948 kB
Inactive:         990804 kB
Active(anon):     313180 kB
Inactive(anon):        0 kB
Active(file):     766768 kB
Inactive(file):   990804 kB
Unevictable:        2468 kB
Mlocked:            2468 kB
HighTotal:       2222408 kB
HighFree:         327460 kB
LowTotal:         853408 kB
LowFree:          576956 kB
SwapTotal:             0 kB
SwapFree:              0 kB
Dirty:               300 kB
Writeback:             0 kB
AnonPages:        303200 kB
Mapped:            86460 kB
Slab:              65668 kB
SReclaimable:      51816 kB
SUnreclaim:        13852 kB
PageTables:         4568 kB
NFS_Unstable:          0 kB
Bounce:                0 kB
WritebackTmp:          0 kB
CommitLimit:     1537908 kB
Committed_AS:     719312 kB
VmallocTotal:     122880 kB
VmallocUsed:       45324 kB
VmallocChunk:      50164 kB
HugePages_Total:       0
HugePages_Free:        0
HugePages_Rsvd:        0
HugePages_Surp:        0
Hugepagesize:       4096 kB
DirectMap4k:       81912 kB
DirectMap4M:      823296 kB
[invain@fedora9 invain]$ sudo lspci
[sudo] password for invain:
00:00.0 Host bridge: Intel Corporation 82Q35 Express DRAM Controller (rev 02)
00:01.0 PCI bridge: Intel Corporation 82Q35 Express PCI Express Root
Port (rev 02)
00:03.0 Communication controller: Intel Corporation 82Q35 Express MEI
Controller (rev 02)
00:03.2 IDE interface: Intel Corporation 82Q35 Express PT IDER
Controller (rev 02)
00:03.3 Serial controller: Intel Corporation 82Q35 Express Serial KT
Controller (rev 02)
00:19.0 Ethernet controller: Intel Corporation 82566DM-2 Gigabit
Network Connection (rev 02)
00:1a.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB
UHCI Controller #4 (rev 02)
00:1a.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB
UHCI Controller #5 (rev 02)
00:1a.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB
UHCI Controller #6 (rev 02)
00:1a.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2
EHCI Controller #2 (rev 02)
00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio
Controller (rev 02)
00:1d.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB
UHCI Controller #1 (rev 02)
00:1d.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB
UHCI Controller #2 (rev 02)
00:1d.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB
UHCI Controller #3 (rev 02)
00:1d.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2
EHCI Controller #1 (rev 02)
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 92)
00:1f.0 ISA bridge: Intel Corporation 82801IO (ICH9DO) LPC Interface
Controller (rev 02)
00:1f.2 IDE interface: Intel Corporation 82801IR/IO/IH (ICH9R/DO/DH) 4
port SATA IDE Controller (rev 02)
00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev 02)
00:1f.5 IDE interface: Intel Corporation 82801I (ICH9 Family) 2 port
SATA IDE Controller (rev 02)
01:00.0 VGA compatible controller: nVidia Corporation GeForce 8500 GT (rev a1)
11:07.0 Ethernet controller: Intel Corporation 82557/8/9/0/1 Ethernet
Pro 100 (rev 10)
[invain@fedora9 invain]$
[invain@fedora9 invain]$
[invain@fedora9 tracing]$

[invain@fedora9 tracing]$ cd /
[invain@fedora9 /]$ ls /debug/tracing/ -al
합계 0
drwxr-xr-x 6 root root 0 2009-04-10 15:09 .
drwxr-xr-x 8 root root 0 2009-04-10 15:09 ..
-rw-r--r-- 1 root root 0 2009-04-10 15:09 README
-r--r--r-- 1 root root 0 2009-04-10 15:09 available_events
-r--r--r-- 1 root root 0 2009-04-10 15:09 available_filter_functions
-r--r--r-- 1 root root 0 2009-04-10 15:09 available_tracers
-rw-r--r-- 1 root root 0 2009-04-10 15:09 buffer_size_kb
-r--r--r-- 1 root root 0 2009-04-10 15:09 current_tracer
-r--r--r-- 1 root root 0 2009-04-10 15:09 dyn_ftrace_total_info
drwxr-xr-x 5 root root 0 2009-04-10 15:09 events
-r--r--r-- 1 root root 0 2009-04-10 15:09 failures
drwxr-xr-x 2 root root 0 2009-04-10 15:09 options
drwxr-xr-x 6 root root 0 2009-04-10 15:09 per_cpu
-r--r--r-- 1 root root 0 2009-04-10 15:09 printk_formats
-rw-r--r-- 1 root root 0 2009-04-10 15:09 set_event
-rw-r--r-- 1 root root 0 2009-04-10 15:09 set_ftrace_filter
-rw-r--r-- 1 root root 0 2009-04-10 15:09 set_ftrace_notrace
-rw-r--r-- 1 root root 0 2009-04-10 15:09 set_ftrace_pid
-r--r--r-- 1 root root 0 2009-04-10 15:09 set_graph_function
-rw-r--r-- 1 root root 0 2009-04-10 15:09 stack_max_size
-r--r--r-- 1 root root 0 2009-04-10 15:09 stack_trace
-rw-r--r-- 1 root root 0 2009-04-10 15:09 sysprof_sample_period
-rw-r--r-- 1 root root 0 2009-04-10 15:09 trace
--w--w---- 1 root root 0 2009-04-10 15:09 trace_marker
-rw-r--r-- 1 root root 0 2009-04-10 15:09 trace_options
-r--r--r-- 1 root root 0 2009-04-10 15:09 trace_pipe
drwxr-xr-x 2 root root 0 2009-04-10 15:09 trace_stat
-rw-r--r-- 1 root root 0 2009-04-10 15:09 tracing_cpumask
-rw-r--r-- 1 root root 0 2009-04-10 15:09 tracing_enabled
-rw-r--r-- 1 root root 0 2009-04-10 15:09 tracing_max_latency
-rw-r--r-- 1 root root 0 2009-04-10 15:09 tracing_on
-rw-r--r-- 1 root root 0 2009-04-10 15:09 tracing_thresh
[invain@fedora9 /]$
[invain@fedora9 /]$
[invain@fedora9 /]$ cat /debug/tracing/available_tracers
syscall blk kmemtrace power branch function_graph mmiotrace wakeup_rt
wakeup irqsoff function sched_switch initcall nop
[invain@fedora9 /]$
[invain@fedora9 tracing]$
[invain@fedora9 tracing]$
[invain@fedora9 tracing]$
[invain@fedora9 tracing]$ sudo cyclictest  -t 10 -b 1000000 --context -D 10
could not set latency_hist/wakeup_latency/reset to 1
0.16 0.20 0.20 1/331 4338

T: 0 ( 4328) P: 0 I:1000 C:   8984 Min:     17 Act:13017 Avg: 8675 Max:   13498
T: 1 ( 4329) P: 0 I:1500 C:   5994 Min:     17 Act: 6048 Avg: 3982 Max:    6190
T: 2 ( 4330) P: 0 I:2000 C:   4498 Min:     17 Act: 2028 Avg: 1196 Max:    2759
T: 3 ( 4331) P: 0 I:2500 C:   3598 Min:     17 Act: 2517 Avg: 1494 Max:    2786
T: 4 ( 4332) P: 0 I:3000 C:   2999 Min:     17 Act:   18 Avg:   25 Max:     514
T: 5 ( 4333) P: 0 I:3500 C:   2571 Min:     17 Act:   18 Avg:   22 Max:     654
T: 6 ( 4334) P: 0 I:4000 C:   2249 Min:     17 Act:   25 Avg:   23 Max:     466
T: 7 ( 4335) P: 0 I:4500 C:   1993 Min:     17 Act:31521 Avg:19809 Max:   33231
T: 8 ( 4336) P: 0 I:5000 C:   1800 Min:     17 Act:   36 Avg:   29 Max:    1095
T: 9 ( 4337) P: 0 I:5500 C:   1636 Min:     17 Act:   29 Avg:   21 Max:     385
[invain@fedora9 tracing]$ tail trace
           gedit-4093  [003] 4154503193.109679:   4093:120:D ==> [003]
 3003:120:R Xorg
            Xorg-3003  [003] 4154503193.109728:   3003:120:D ==> [003]
    0:140:R <idle>
          <idle>-0     [003] 4154503193.110171:      0:140:R   + [003]
 4327:120:D cyclictest
          <idle>-0     [003] 4154503193.110176:      0:140:R ==> [003]
 4327:120:R cyclictest
          <idle>-0     [002] 4154503193.110217:      0:140:R   + [002]
   32: 49:D sirq-timer/2
          <idle>-0     [002] 4154503193.110222:      0:140:R ==> [002]
   32: 49:R sirq-timer/2
    sirq-timer/2-32    [002] 4154503193.110230:     32: 49:D ==> [002]
    0:140:R <idle>
      cyclictest-4327  [003] 4154503193.110344:   4327:120:R   + [003]
   45: 49:D sirq-timer/3
      cyclictest-4327  [003] 4154503193.110349:   4327:120:R ==> [003]
   45: 49:R sirq-timer/3
    sirq-timer/3-45    [003] 4154503193.110355:     45: 49:D ==> [003]
 4327:120:R cyclictest
[invain@fedora9 tracing]$


Regards,
GeunSik Lim.

2009/4/10 Thomas Gleixner <tglx@linutronix.de>:
> We are pleased to announce the next update to our new preempt-rt
> series.
>
>        - rt locks fixes (Jan Blunck, tglx)
>        - kvm vs. -rt fixes (Jan Blunck)
>        - hpet interrupt fix (tglx, reported and tested by Hans Peter Bock)
>
> Download locations:
>
>     http://rt.et.redhat.com/download/
>     http://www.kernel.org/pub/linux/kernel/projects/rt/
>
> Information on the RT patch can be found at:
>
>     http://rt.wiki.kernel.org/index.php/Main_Page
>
> to build the 2.6.29.1-rt6 tree, the following patches should be
> applied:
>
>     http://www.kernel.org/pub/linux/kernel/v2.6/linux-2.6.29.1.tar.bz2
>     http://www.kernel.org/pub/linux/kernel/projects/rt/patch-2.6.29.1-rt6.bz2
>
> The broken out patches are also available at the same download
> locations.
>
> Enjoy !
>
>       tglx
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-rt-users" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
>



-- 
Regards,
GeunSik Lim
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info