All of lore.kernel.org
 help / color / mirror / Atom feed
From: nico@fluxnic.net (Nicolas Pitre)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 1/2] ARM: Replace platform definition of ISA_DMA_THRESHOLD/MAX_DMA_ADDRESS
Date: Thu, 12 May 2011 09:16:16 +0200 (CEST)	[thread overview]
Message-ID: <alpine.LFD.2.00.1105120914420.28229@xanadu.home> (raw)
In-Reply-To: <E1QKCDr-0007Nk-4P@rmk-PC.arm.linux.org.uk>

On Wed, 11 May 2011, Russell King - ARM Linux wrote:

> The values of ISA_DMA_THRESHOLD and MAX_DMA_ADDRESS are related; one is
> the physical/bus address, the other is the virtual address.  Both need
> to be kept in step, so rather than having platforms define both, allow
> them to define a single macro which sets both of these macros
> appropraitely.
> 
> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

Acked-by: Nicolas Pitre <nicolas.pitre@linaro.org>

> ---
>  arch/arm/include/asm/dma.h                   |    4 +++-
>  arch/arm/include/asm/memory.h                |    4 +++-
>  arch/arm/mach-davinci/include/mach/memory.h  |    3 +--
>  arch/arm/mach-h720x/include/mach/memory.h    |    3 +--
>  arch/arm/mach-ixp4xx/include/mach/memory.h   |    3 +--
>  arch/arm/mach-pxa/include/mach/memory.h      |    3 +--
>  arch/arm/mach-realview/include/mach/memory.h |    3 +--
>  arch/arm/mach-sa1100/include/mach/memory.h   |    3 +--
>  arch/arm/mach-shark/include/mach/memory.h    |    3 +--
>  9 files changed, 13 insertions(+), 16 deletions(-)
> 
> diff --git a/arch/arm/include/asm/dma.h b/arch/arm/include/asm/dma.h
> index ca51143..4200554 100644
> --- a/arch/arm/include/asm/dma.h
> +++ b/arch/arm/include/asm/dma.h
> @@ -6,8 +6,10 @@
>  /*
>   * This is the maximum virtual address which can be DMA'd from.
>   */
> -#ifndef MAX_DMA_ADDRESS
> +#ifndef ARM_DMA_ZONE_SIZE
>  #define MAX_DMA_ADDRESS	0xffffffff
> +#else
> +#define MAX_DMA_ADDRESS	(PAGE_OFFSET + ARM_DMA_ZONE_SIZE)
>  #endif
>  
>  #ifdef CONFIG_ISA_DMA_API
> diff --git a/arch/arm/include/asm/memory.h b/arch/arm/include/asm/memory.h
> index 431077c..ee5ff41 100644
> --- a/arch/arm/include/asm/memory.h
> +++ b/arch/arm/include/asm/memory.h
> @@ -209,8 +209,10 @@ static inline unsigned long __phys_to_virt(unsigned long x)
>   * allocations.  This must be the smallest DMA mask in the system,
>   * so a successful GFP_DMA allocation will always satisfy this.
>   */
> -#ifndef ISA_DMA_THRESHOLD
> +#ifndef ARM_DMA_ZONE_SIZE
>  #define ISA_DMA_THRESHOLD	(0xffffffffULL)
> +#else
> +#define ISA_DMA_THRESHOLD	(PHYS_OFFSET + ARM_DMA_ZONE_SIZE - 1)
>  #endif
>  
>  #ifndef arch_adjust_zones
> diff --git a/arch/arm/mach-davinci/include/mach/memory.h b/arch/arm/mach-davinci/include/mach/memory.h
> index 7882272..8d27246 100644
> --- a/arch/arm/mach-davinci/include/mach/memory.h
> +++ b/arch/arm/mach-davinci/include/mach/memory.h
> @@ -59,8 +59,7 @@ __arch_adjust_zones(unsigned long *size, unsigned long *holes)
>  #define arch_adjust_zones(zone_size, holes) \
>          if ((meminfo.bank[0].size >> 20) > 128) __arch_adjust_zones(zone_size, holes)
>  
> -#define ISA_DMA_THRESHOLD	(PHYS_OFFSET + (128<<20) - 1)
> -#define MAX_DMA_ADDRESS		(PAGE_OFFSET + (128<<20))
> +#define ARM_DMA_ZONE_SIZE	SZ_128M
>  
>  #endif
>  
> diff --git a/arch/arm/mach-h720x/include/mach/memory.h b/arch/arm/mach-h720x/include/mach/memory.h
> index 9d36876..b0b3bae 100644
> --- a/arch/arm/mach-h720x/include/mach/memory.h
> +++ b/arch/arm/mach-h720x/include/mach/memory.h
> @@ -13,7 +13,6 @@
>   * There should not be more than (0xd0000000 - 0xc0000000)
>   * bytes of RAM.
>   */
> -#define ISA_DMA_THRESHOLD	(PHYS_OFFSET + SZ_256M - 1)
> -#define MAX_DMA_ADDRESS		(PAGE_OFFSET + SZ_256M)
> +#define ARM_DMA_ZONE_SIZE	SZ_256M
>  
>  #endif
> diff --git a/arch/arm/mach-ixp4xx/include/mach/memory.h b/arch/arm/mach-ixp4xx/include/mach/memory.h
> index 6d388c9..a5c26f8 100644
> --- a/arch/arm/mach-ixp4xx/include/mach/memory.h
> +++ b/arch/arm/mach-ixp4xx/include/mach/memory.h
> @@ -21,8 +21,7 @@ void ixp4xx_adjust_zones(unsigned long *size, unsigned long *holes);
>  #define arch_adjust_zones(size, holes) \
>  	ixp4xx_adjust_zones(size, holes)
>  
> -#define ISA_DMA_THRESHOLD (SZ_64M - 1)
> -#define MAX_DMA_ADDRESS		(PAGE_OFFSET + SZ_64M)
> +#define ARM_DMA_ZONE_SIZE	SZ_64M
>  
>  #endif
>  
> diff --git a/arch/arm/mach-pxa/include/mach/memory.h b/arch/arm/mach-pxa/include/mach/memory.h
> index 7f68724..57a0b68 100644
> --- a/arch/arm/mach-pxa/include/mach/memory.h
> +++ b/arch/arm/mach-pxa/include/mach/memory.h
> @@ -23,8 +23,7 @@ void cmx2xx_pci_adjust_zones(unsigned long *size, unsigned long *holes);
>  #define arch_adjust_zones(size, holes) \
>  	cmx2xx_pci_adjust_zones(size, holes)
>  
> -#define ISA_DMA_THRESHOLD	(PHYS_OFFSET + SZ_64M - 1)
> -#define MAX_DMA_ADDRESS		(PAGE_OFFSET + SZ_64M)
> +#define ARM_DMA_ZONE_SIZE	SZ_64M
>  #endif
>  
>  #endif
> diff --git a/arch/arm/mach-realview/include/mach/memory.h b/arch/arm/mach-realview/include/mach/memory.h
> index e05fc2c..973428d 100644
> --- a/arch/arm/mach-realview/include/mach/memory.h
> +++ b/arch/arm/mach-realview/include/mach/memory.h
> @@ -34,8 +34,7 @@ extern void realview_adjust_zones(unsigned long *size, unsigned long *hole);
>  #define arch_adjust_zones(size, hole) \
>  	realview_adjust_zones(size, hole)
>  
> -#define ISA_DMA_THRESHOLD	(PHYS_OFFSET + SZ_256M - 1)
> -#define MAX_DMA_ADDRESS		(PAGE_OFFSET + SZ_256M)
> +#define ARM_DMA_ZONE_SIZE	SZ_256M
>  #endif
>  
>  #ifdef CONFIG_SPARSEMEM
> diff --git a/arch/arm/mach-sa1100/include/mach/memory.h b/arch/arm/mach-sa1100/include/mach/memory.h
> index a44da6a..090b829 100644
> --- a/arch/arm/mach-sa1100/include/mach/memory.h
> +++ b/arch/arm/mach-sa1100/include/mach/memory.h
> @@ -22,8 +22,7 @@ void sa1111_adjust_zones(unsigned long *size, unsigned long *holes);
>  #define arch_adjust_zones(size, holes) \
>  	sa1111_adjust_zones(size, holes)
>  
> -#define ISA_DMA_THRESHOLD	(PHYS_OFFSET + SZ_1M - 1)
> -#define MAX_DMA_ADDRESS		(PAGE_OFFSET + SZ_1M)
> +#define ARM_DMA_ZONE_SIZE	SZ_1M
>  
>  #endif
>  #endif
> diff --git a/arch/arm/mach-shark/include/mach/memory.h b/arch/arm/mach-shark/include/mach/memory.h
> index 9afb170..48fe84b 100644
> --- a/arch/arm/mach-shark/include/mach/memory.h
> +++ b/arch/arm/mach-shark/include/mach/memory.h
> @@ -32,8 +32,7 @@ static inline void __arch_adjust_zones(unsigned long *zone_size, unsigned long *
>  #define arch_adjust_zones(size, holes) \
>  	__arch_adjust_zones(size, holes)
>  
> -#define ISA_DMA_THRESHOLD	(PHYS_OFFSET + SZ_4M - 1)
> -#define MAX_DMA_ADDRESS		(PAGE_OFFSET + SZ_4M)
> +#define ARM_DMA_ZONE_SIZE	SZ_4M
>  
>  #endif
>  
> -- 
> 1.7.4.4
> 

  parent reply	other threads:[~2011-05-12  7:16 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2011-05-11 16:24 [PATCH 0/2] Consolidate zone adjustment Russell King - ARM Linux
2011-05-11 16:25 ` [PATCH 1/2] ARM: Replace platform definition of ISA_DMA_THRESHOLD/MAX_DMA_ADDRESS Russell King - ARM Linux
2011-05-11 17:22   ` Catalin Marinas
2011-05-12  7:16   ` Nicolas Pitre [this message]
2011-05-11 16:25 ` [PATCH 2/2] ARM: use ARM_DMA_ZONE_SIZE to adjust the zone sizes Russell King - ARM Linux
2011-05-11 17:21   ` Catalin Marinas
2011-05-11 17:24     ` Russell King - ARM Linux
2011-05-12  7:28   ` Nicolas Pitre
2011-05-19 10:56 ` [PATCH 0/2] Consolidate zone adjustment Nori, Sekhar

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=alpine.LFD.2.00.1105120914420.28229@xanadu.home \
    --to=nico@fluxnic.net \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.