From: Kumar Gala <galak@kernel.crashing.org>
To: u-boot@lists.denx.de
Subject: [U-Boot] [GIT pull] Please pull u-boot-mpc85xx
Date: Mon, 11 Jul 2011 13:25:15 -0500 (CDT) [thread overview]
Message-ID: <alpine.LFD.2.00.1107111324480.27526@right.am.freescale.net> (raw)
The following changes since commit 810cb19003ffe0115d10700fc512a2a743916f20:
MPC83XX: Fix PCI express clock setup (2011-07-06 19:09:28 -0500)
are available in the git repository at:
git://git.denx.de/u-boot-mpc85xx master
Felix Radensky (1):
powerpc/85xx: Fix pin muxing for second USB controller
Kumar Gala (4):
powerpc/85xx: Fix compile errors if CONFIG_SYS_{B,Q}MAN_MEM_PHYS aren't set
powerpc/85xx: Fix compile errors if CONFIG_SYS_{BR,OR}0_PRELIM aren't set
powerpc/85xx: Fix compile errors if CONFIG_SYS_DPAA_QBMAN isn't set
powerpc/85xx: Add P2041 processor support
Mingkai Hu (1):
powerpc/p2040: Add various p2040 specific information
Ramneek Mehresh (5):
qoriq/p1_p2_rdb: Add Dual Role USB support macro for P1020RDB
powerpc/8xxx: Update USB mode device tree fixup
powerpc/85xx: Specify hwconfig usage for USB controller
qoriq/p1_p2_rdb: USB device-tree fixups for P1020
powerpc/85xx: Add default usb mode and phy type to hwconfig
Roy Zang (1):
powerpc/85xx: Add basic support for P1023RDS board
Shaohui Xie (1):
powerpc/85xx: Add NAND boot support for P3041/P5020DS
Timur Tabi (2):
powerpc/86xx: display boot device and bank on the MPC8610 HPCD
powerpc/85xx: remove SERDES4 soft-reset work-around
York Sun (11):
powerpc/mpc8xxx: adjust DDR burst length and chop accroding to sdram width
powerpc/mpc8xxx: check SPD length before using part number
powerpc/mpc8xxx: Add 16-bit support for DDR3
Adding more SPD registers
powerpc/mpc8xxx: Enable calculation for fixed DDR chips
powerpc/mpc8xxx: Adding fallback to raw timing on supported boards
powerpc/mpc8xxx: fix DDR data width checking
powerpc/corenet_ds: Fix RCW overriding for RDIMM
powerpc/mpc85xx: Display a warning for unsupported DDR data rates
powerpc/mpc8xxx: Allow override DDR read-to-write turnaround time
powerpc/corenet_ds: add back buffer write for NOR flash
MAINTAINERS | 1 +
README | 6 +
arch/powerpc/cpu/mpc85xx/Makefile | 6 +
arch/powerpc/cpu/mpc85xx/cpu.c | 4 +-
arch/powerpc/cpu/mpc85xx/fsl_corenet_serdes.c | 71 ++-
arch/powerpc/cpu/mpc85xx/p2040_ids.c | 109 +++++
arch/powerpc/cpu/mpc85xx/p2040_serdes.c | 24 +
arch/powerpc/cpu/mpc85xx/p3041_ids.c | 11 +-
arch/powerpc/cpu/mpc85xx/p4080_ids.c | 13 +-
arch/powerpc/cpu/mpc85xx/p5020_ids.c | 11 +-
arch/powerpc/cpu/mpc8xxx/cpu.c | 2 +
arch/powerpc/cpu/mpc8xxx/ddr/Makefile | 13 +-
arch/powerpc/cpu/mpc8xxx/ddr/ctrl_regs.c | 3 +
arch/powerpc/cpu/mpc8xxx/ddr/ddr.h | 7 +
arch/powerpc/cpu/mpc8xxx/ddr/ddr3_dimm_params.c | 3 +-
arch/powerpc/cpu/mpc8xxx/ddr/main.c | 34 ++-
arch/powerpc/cpu/mpc8xxx/ddr/options.c | 44 ++-
arch/powerpc/cpu/mpc8xxx/fdt.c | 77 +++-
arch/powerpc/cpu/mpc8xxx/fsl_lbc.c | 2 +
arch/powerpc/include/asm/config_mpc85xx.h | 16 +
arch/powerpc/include/asm/fsl_ddr_sdram.h | 6 +
arch/powerpc/include/asm/immap_85xx.h | 2 +-
arch/powerpc/include/asm/processor.h | 2 +
board/freescale/corenet_ds/corenet_ds.c | 2 +
board/freescale/corenet_ds/ddr.c | 8 +-
board/freescale/corenet_ds/law.c | 4 +
board/freescale/corenet_ds/tlb.c | 4 +
board/freescale/mpc8572ds/ddr.c | 8 +-
board/freescale/mpc8610hpcd/mpc8610hpcd.c | 25 +-
board/freescale/mpc8641hpcn/ddr.c | 5 +
board/freescale/p1023rds/Makefile | 38 ++
board/freescale/p1023rds/bcsr.h | 53 +++
board/freescale/p1023rds/law.c | 35 ++
board/freescale/p1023rds/p1023rds.c | 162 +++++++
board/freescale/p1023rds/tlb.c | 118 +++++
board/freescale/p1_p2_rdb/p1_p2_rdb.c | 47 ++
board/freescale/p2020ds/ddr.c | 6 +
board/xes/xpedite550x/ddr.c | 6 +
boards.cfg | 4 +
doc/README.fsl-hwconfig | 25 +
doc/README.p1023rds | 101 ++++
include/configs/MPC8536DS.h | 3 +-
include/configs/P1023RDS.h | 562 +++++++++++++++++++++++
include/configs/P1_P2_RDB.h | 3 +-
include/configs/P2020DS.h | 3 +-
include/configs/corenet_ds.h | 39 ++-
include/ddr_spd.h | 4 +-
nand_spl/board/freescale/p1023rds/Makefile | 132 ++++++
nand_spl/board/freescale/p1023rds/nand_boot.c | 99 ++++
49 files changed, 1888 insertions(+), 75 deletions(-)
create mode 100644 arch/powerpc/cpu/mpc85xx/p2040_ids.c
create mode 100644 board/freescale/p1023rds/Makefile
create mode 100644 board/freescale/p1023rds/bcsr.h
create mode 100644 board/freescale/p1023rds/law.c
create mode 100644 board/freescale/p1023rds/p1023rds.c
create mode 100644 board/freescale/p1023rds/tlb.c
create mode 100644 doc/README.p1023rds
create mode 100644 include/configs/P1023RDS.h
create mode 100644 nand_spl/board/freescale/p1023rds/Makefile
create mode 100644 nand_spl/board/freescale/p1023rds/nand_boot.c
next reply other threads:[~2011-07-11 18:25 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-07-11 18:25 Kumar Gala [this message]
2011-07-11 20:12 ` [U-Boot] [GIT pull] Please pull u-boot-mpc85xx Wolfgang Denk
-- strict thread matches above, loose matches on Subject: below --
2012-01-12 20:08 [U-Boot] [GIT PULL] please " Kumar Gala
2012-01-13 16:24 ` Paul Gortmaker
2012-01-13 18:53 ` Kumar Gala
2012-01-13 19:40 ` Wolfgang Denk
[not found] ` <CAOZdJXU3bskH=-UH7hb8LkgrRHiimUmKqBC1=Gya9dWNw8ZEJQ@mail.gmail.com>
2012-01-16 19:14 ` Tabi Timur-B04825
2012-01-16 19:15 ` Timur Tabi
2011-12-09 14:51 Kumar Gala
2011-12-10 21:44 ` Wolfgang Denk
2011-07-29 13:05 [U-Boot] [GIT pull] Please " Kumar Gala
2011-07-29 23:35 ` Wolfgang Denk
2011-07-22 7:55 Kumar Gala
2011-07-25 20:16 ` Wolfgang Denk
2011-07-27 21:52 ` Tabi Timur-B04825
2011-07-18 13:24 Kumar Gala
2011-07-18 19:04 ` Wolfgang Denk
2011-06-09 20:57 Kumar Gala
2011-06-15 23:16 ` Kumar Gala
2011-06-21 19:20 ` Wolfgang Denk
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=alpine.LFD.2.00.1107111324480.27526@right.am.freescale.net \
--to=galak@kernel.crashing.org \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.