From mboxrd@z Thu Jan 1 00:00:00 1970 From: Robert P. J. Day Date: Wed, 16 Dec 2015 11:47:39 -0500 (EST) Subject: [U-Boot] [PATCH] video: Typo cleanup in drivers/video/da8xx-fb.c Message-ID: List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Signed-off-by: Robert P. J. Day --- more tidying up as i run across it ... diff --git a/drivers/video/da8xx-fb.c b/drivers/video/da8xx-fb.c index e2b2144..468f385d 100644 --- a/drivers/video/da8xx-fb.c +++ b/drivers/video/da8xx-fb.c @@ -379,7 +379,7 @@ static void lcd_cfg_ac_bias(int period, int transitions_per_int) { u32 reg; - /* Set the AC Bias Period and Number of Transisitons per Interrupt */ + /* Set the AC Bias Period and Number of Transitions per Interrupt */ reg = lcdc_read(&da8xx_fb_reg_base->raster_timing_2) & 0xFFF00000; reg |= LCD_AC_BIAS_FREQUENCY(period) | LCD_AC_BIAS_TRANSITIONS_PER_INT(transitions_per_int); @@ -487,7 +487,7 @@ static int lcd_cfg_frame_buffer(struct da8xx_fb_par *par, u32 width, u32 height, /* Pixels per line = (PPL + 1)*16 */ if (lcd_revision == LCD_VERSION_1) { /* - * 0x3F in bits 4..9 gives max horisontal resolution = 1024 + * 0x3F in bits 4..9 gives max horizontal resolution = 1024 * pixels */ width &= 0x3f0; @@ -695,7 +695,7 @@ static int lcd_init(struct da8xx_fb_par *par, const struct lcd_ctrl_config *cfg, lcd_cfg_vertical_sync(panel->vbp, panel->vsw, panel->vfp); lcd_cfg_horizontal_sync(panel->hbp, panel->hsw, panel->hfp); - /* Configure for disply */ + /* Configure for display */ ret = lcd_cfg_display(cfg); if (ret < 0) return ret; @@ -761,7 +761,7 @@ static u32 lcdc_irq_handler_rev01(void) lcdc_write(stat, &da8xx_fb_reg_base->stat); - /* Disable PL completion inerrupt */ + /* Disable PL completion interrupt */ reg_ras = lcdc_read(&da8xx_fb_reg_base->raster_ctrl); reg_ras &= ~LCD_V1_PL_INT_ENA; lcdc_write(reg_ras, &da8xx_fb_reg_base->raster_ctrl); @@ -810,7 +810,7 @@ static u32 lcdc_irq_handler_rev02(void) lcdc_write(stat, &da8xx_fb_reg_base->masked_stat); - /* Disable PL completion inerrupt */ + /* Disable PL completion interrupt */ reg_int = lcdc_read(&da8xx_fb_reg_base->int_ena_clr) | (LCD_V2_PL_INT_ENA); lcdc_write(reg_int, &da8xx_fb_reg_base->int_ena_clr); rday -- ======================================================================== Robert P. J. Day Ottawa, Ontario, CANADA http://crashcourse.ca Twitter: http://twitter.com/rpjday LinkedIn: http://ca.linkedin.com/in/rpjday ========================================================================