* [dm-devel] [RFC PATCH 0/3] NVMe copy offload patches
@ 2022-02-01 18:31 ` Mikulas Patocka
0 siblings, 0 replies; 272+ messages in thread
From: Mikulas Patocka @ 2022-02-01 18:31 UTC (permalink / raw)
To: Javier González
Cc: djwong, linux-nvme, clm, dm-devel, osandov,
msnitzer@redhat.com >> msnitzer@redhat.com,
Bart Van Assche, linux-scsi, Christoph Hellwig, roland,
zach.brown, Chaitanya Kulkarni, josef, linux-block, dsterba,
kbus @imap.gmail.com>> Keith Busch, Frederick.Knight,
Jens Axboe, tytso, Kanchan Joshi,
martin.petersen@oracle.com >> Martin K. Petersen, jack,
linux-fsdevel, lsf-pc
Hi
Here I'm submitting the first version of NVMe copy offload patches as a
request for comment. They use the token-based approach as we discussed on
the phone call.
The first patch adds generic copy offload support to the block layer - it
adds two new bio types (REQ_OP_COPY_READ_TOKEN and
REQ_OP_COPY_WRITE_TOKEN) and a new ioctl BLKCOPY and a kernel function
blkdev_issue_copy.
The second patch adds copy offload support to the NVMe subsystem.
The third patch implements a "nvme-debug" driver - it is similar to
"scsi-debug", it simulates a nvme host controller, it keeps data in memory
and it supports copy offload according to NVMe Command Set Specification
1.0a. (there are no hardware or software implementations supporting copy
offload so far, so I implemented it in nvme-debug)
TODO:
* implement copy offload in device mapper linear target
* implement copy offload in software NVMe target driver
* make it possible to complete REQ_OP_COPY_WRITE_TOKEN bios asynchronously
* should we use copy_file_range instead of a new ioctl?
How to test this:
* apply the three patches
* select CONFIG_NVME_DEBUG
* compile the kernel
* modprobe nvme-debug; nvme connect -t debug -a 123 -n 456
* issue the BLKCOPY ioctl on /dev/nvme0n1, for example, you can use this
program:
http://people.redhat.com/~mpatocka/patches/kernel/xcopy/example/blkcopy.c
Mikulas
--
dm-devel mailing list
dm-devel@redhat.com
https://listman.redhat.com/mailman/listinfo/dm-devel
^ permalink raw reply [flat|nested] 272+ messages in thread
* [RFC PATCH 1/3] block: add copy offload support
2022-02-01 18:31 ` [dm-devel] " Mikulas Patocka
@ 2022-02-01 18:32 ` Mikulas Patocka
-1 siblings, 0 replies; 272+ messages in thread
From: Mikulas Patocka @ 2022-02-01 18:32 UTC (permalink / raw)
To: Javier González
Cc: Chaitanya Kulkarni, linux-block, linux-scsi, dm-devel,
linux-nvme, linux-fsdevel, Jens Axboe,
msnitzer@redhat.com >> msnitzer@redhat.com,
Bart Van Assche,
martin.petersen@oracle.com >> Martin K. Petersen, roland,
Hannes Reinecke, kbus @imap.gmail.com>> Keith Busch,
Christoph Hellwig, Frederick.Knight, zach.brown, osandov, lsf-pc,
djwong, josef, clm, dsterba, tytso, jack, Kanchan Joshi
Add generic copy offload support to the block layer.
We add two new bio types: REQ_OP_COPY_READ_TOKEN and
REQ_OP_COPY_WRITE_TOKEN. Their bio vector has one entry - a page
containing the token.
When we need to copy data, we send REQ_OP_COPY_READ_TOKEN to the source
device and then we send REQ_OP_COPY_WRITE_TOKEN to the destination device.
This patch introduces a new ioctl BLKCOPY that submits the copy operation.
BLKCOPY argument has four 64-bit numbers - source offset, destination
offset and length. The last number is returned by the ioctl and it is the
number of bytes that were actually copied.
For in-kernel users, we introduce a function blkdev_issue_copy.
Copying may fail anytime, the caller is required to fallback to explicit
copy.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
---
block/blk-core.c | 7 +++
block/blk-lib.c | 89 ++++++++++++++++++++++++++++++++++++++++++++++
block/blk-settings.c | 12 ++++++
block/blk-sysfs.c | 7 +++
block/blk.h | 3 +
block/ioctl.c | 56 ++++++++++++++++++++++++++++
include/linux/blk_types.h | 4 ++
include/linux/blkdev.h | 18 +++++++++
include/uapi/linux/fs.h | 1
9 files changed, 197 insertions(+)
Index: linux-2.6/block/blk-settings.c
===================================================================
--- linux-2.6.orig/block/blk-settings.c 2022-01-26 19:12:30.000000000 +0100
+++ linux-2.6/block/blk-settings.c 2022-01-27 20:43:27.000000000 +0100
@@ -57,6 +57,7 @@ void blk_set_default_limits(struct queue
lim->misaligned = 0;
lim->zoned = BLK_ZONED_NONE;
lim->zone_write_granularity = 0;
+ lim->max_copy_sectors = 0;
}
EXPORT_SYMBOL(blk_set_default_limits);
@@ -365,6 +366,17 @@ void blk_queue_zone_write_granularity(st
EXPORT_SYMBOL_GPL(blk_queue_zone_write_granularity);
/**
+ * blk_queue_max_copy_sectors - set maximum copy offload sectors for the queue
+ * @q: the request queue for the device
+ * @size: the maximum copy offload sectors
+ */
+void blk_queue_max_copy_sectors(struct request_queue *q, unsigned int size)
+{
+ q->limits.max_copy_sectors = size;
+}
+EXPORT_SYMBOL_GPL(blk_queue_max_copy_sectors);
+
+/**
* blk_queue_alignment_offset - set physical block alignment offset
* @q: the request queue for the device
* @offset: alignment offset in bytes
Index: linux-2.6/include/linux/blkdev.h
===================================================================
--- linux-2.6.orig/include/linux/blkdev.h 2022-01-26 19:12:30.000000000 +0100
+++ linux-2.6/include/linux/blkdev.h 2022-01-29 17:46:03.000000000 +0100
@@ -103,6 +103,7 @@ struct queue_limits {
unsigned int discard_granularity;
unsigned int discard_alignment;
unsigned int zone_write_granularity;
+ unsigned int max_copy_sectors;
unsigned short max_segments;
unsigned short max_integrity_segments;
@@ -706,6 +707,7 @@ extern void blk_queue_max_zone_append_se
extern void blk_queue_physical_block_size(struct request_queue *, unsigned int);
void blk_queue_zone_write_granularity(struct request_queue *q,
unsigned int size);
+void blk_queue_max_copy_sectors(struct request_queue *q, unsigned int size);
extern void blk_queue_alignment_offset(struct request_queue *q,
unsigned int alignment);
void disk_update_readahead(struct gendisk *disk);
@@ -862,6 +864,10 @@ extern int __blkdev_issue_zeroout(struct
extern int blkdev_issue_zeroout(struct block_device *bdev, sector_t sector,
sector_t nr_sects, gfp_t gfp_mask, unsigned flags);
+extern int blkdev_issue_copy(struct block_device *bdev1, sector_t sector1,
+ struct block_device *bdev2, sector_t sector2,
+ sector_t nr_sects, sector_t *copied, gfp_t gfp_mask);
+
static inline int sb_issue_discard(struct super_block *sb, sector_t block,
sector_t nr_blocks, gfp_t gfp_mask, unsigned long flags)
{
@@ -1001,6 +1007,18 @@ bdev_zone_write_granularity(struct block
return queue_zone_write_granularity(bdev_get_queue(bdev));
}
+static inline unsigned int
+queue_max_copy_sectors(const struct request_queue *q)
+{
+ return q->limits.max_copy_sectors;
+}
+
+static inline unsigned int
+bdev_max_copy_sectors(struct block_device *bdev)
+{
+ return queue_max_copy_sectors(bdev_get_queue(bdev));
+}
+
static inline int queue_alignment_offset(const struct request_queue *q)
{
if (q->limits.misaligned)
Index: linux-2.6/block/blk-sysfs.c
===================================================================
--- linux-2.6.orig/block/blk-sysfs.c 2022-01-26 19:12:30.000000000 +0100
+++ linux-2.6/block/blk-sysfs.c 2022-01-26 19:12:30.000000000 +0100
@@ -230,6 +230,11 @@ static ssize_t queue_zone_write_granular
return queue_var_show(queue_zone_write_granularity(q), page);
}
+static ssize_t queue_max_copy_sectors_show(struct request_queue *q, char *page)
+{
+ return queue_var_show(queue_max_copy_sectors(q), page);
+}
+
static ssize_t queue_zone_append_max_show(struct request_queue *q, char *page)
{
unsigned long long max_sectors = q->limits.max_zone_append_sectors;
@@ -591,6 +596,7 @@ QUEUE_RO_ENTRY(queue_write_same_max, "wr
QUEUE_RO_ENTRY(queue_write_zeroes_max, "write_zeroes_max_bytes");
QUEUE_RO_ENTRY(queue_zone_append_max, "zone_append_max_bytes");
QUEUE_RO_ENTRY(queue_zone_write_granularity, "zone_write_granularity");
+QUEUE_RO_ENTRY(queue_max_copy_sectors, "max_copy_sectors");
QUEUE_RO_ENTRY(queue_zoned, "zoned");
QUEUE_RO_ENTRY(queue_nr_zones, "nr_zones");
@@ -647,6 +653,7 @@ static struct attribute *queue_attrs[] =
&queue_write_zeroes_max_entry.attr,
&queue_zone_append_max_entry.attr,
&queue_zone_write_granularity_entry.attr,
+ &queue_max_copy_sectors_entry.attr,
&queue_nonrot_entry.attr,
&queue_zoned_entry.attr,
&queue_nr_zones_entry.attr,
Index: linux-2.6/include/linux/blk_types.h
===================================================================
--- linux-2.6.orig/include/linux/blk_types.h 2022-01-06 18:55:01.000000000 +0100
+++ linux-2.6/include/linux/blk_types.h 2022-01-29 17:47:44.000000000 +0100
@@ -371,6 +371,10 @@ enum req_opf {
/* reset all the zone present on the device */
REQ_OP_ZONE_RESET_ALL = 17,
+ /* copy offload bios */
+ REQ_OP_COPY_READ_TOKEN = 18,
+ REQ_OP_COPY_WRITE_TOKEN = 19,
+
/* Driver private requests */
REQ_OP_DRV_IN = 34,
REQ_OP_DRV_OUT = 35,
Index: linux-2.6/block/blk-lib.c
===================================================================
--- linux-2.6.orig/block/blk-lib.c 2021-08-18 13:59:55.000000000 +0200
+++ linux-2.6/block/blk-lib.c 2022-01-30 17:33:04.000000000 +0100
@@ -440,3 +440,92 @@ retry:
return ret;
}
EXPORT_SYMBOL(blkdev_issue_zeroout);
+
+static void bio_wake_completion(struct bio *bio)
+{
+ struct completion *comp = bio->bi_private;
+ complete(comp);
+}
+
+int blkdev_issue_copy(struct block_device *bdev1, sector_t sector1,
+ struct block_device *bdev2, sector_t sector2,
+ sector_t nr_sects, sector_t *copied, gfp_t gfp_mask)
+{
+ struct page *token;
+ sector_t m;
+ int r = 0;
+ struct completion comp;
+
+ *copied = 0;
+
+ m = min(bdev_max_copy_sectors(bdev1), bdev_max_copy_sectors(bdev2));
+ if (!m)
+ return -EOPNOTSUPP;
+ m = min(m, (sector_t)round_down(UINT_MAX, PAGE_SIZE) >> 9);
+
+ if (unlikely(bdev_read_only(bdev2)))
+ return -EPERM;
+
+ token = alloc_page(gfp_mask);
+ if (unlikely(!token))
+ return -ENOMEM;
+
+ while (nr_sects) {
+ struct bio *read_bio, *write_bio;
+ sector_t this_step = min(nr_sects, m);
+
+ read_bio = bio_alloc(gfp_mask, 1);
+ if (unlikely(!read_bio)) {
+ r = -ENOMEM;
+ break;
+ }
+ bio_set_op_attrs(read_bio, REQ_OP_COPY_READ_TOKEN, REQ_NOMERGE);
+ bio_set_dev(read_bio, bdev1);
+ __bio_add_page(read_bio, token, PAGE_SIZE, 0);
+ read_bio->bi_iter.bi_sector = sector1;
+ read_bio->bi_iter.bi_size = this_step << 9;
+ read_bio->bi_private = ∁
+ read_bio->bi_end_io = bio_wake_completion;
+ init_completion(&comp);
+ submit_bio(read_bio);
+ wait_for_completion(&comp);
+ if (unlikely(read_bio->bi_status != BLK_STS_OK)) {
+ r = blk_status_to_errno(read_bio->bi_status);
+ bio_put(read_bio);
+ break;
+ }
+ bio_put(read_bio);
+
+ write_bio = bio_alloc(gfp_mask, 1);
+ if (unlikely(!write_bio)) {
+ r = -ENOMEM;
+ break;
+ }
+ bio_set_op_attrs(write_bio, REQ_OP_COPY_WRITE_TOKEN, REQ_NOMERGE);
+ bio_set_dev(write_bio, bdev2);
+ __bio_add_page(write_bio, token, PAGE_SIZE, 0);
+ write_bio->bi_iter.bi_sector = sector2;
+ write_bio->bi_iter.bi_size = this_step << 9;
+ write_bio->bi_private = ∁
+ write_bio->bi_end_io = bio_wake_completion;
+ reinit_completion(&comp);
+ submit_bio(write_bio);
+ wait_for_completion(&comp);
+ if (unlikely(write_bio->bi_status != BLK_STS_OK)) {
+ r = blk_status_to_errno(write_bio->bi_status);
+ bio_put(write_bio);
+ break;
+ }
+ bio_put(write_bio);
+
+ sector1 += this_step;
+ sector2 += this_step;
+ nr_sects -= this_step;
+ *copied += this_step;
+ }
+
+ __free_page(token);
+
+ return r;
+}
+EXPORT_SYMBOL(blkdev_issue_copy);
Index: linux-2.6/block/ioctl.c
===================================================================
--- linux-2.6.orig/block/ioctl.c 2022-01-24 15:10:40.000000000 +0100
+++ linux-2.6/block/ioctl.c 2022-01-30 13:43:35.000000000 +0100
@@ -165,6 +165,60 @@ fail:
return err;
}
+static int blk_ioctl_copy(struct block_device *bdev, fmode_t mode,
+ unsigned long arg)
+{
+ uint64_t range[4];
+ uint64_t start1, start2, end1, end2, len;
+ sector_t copied = 0;
+ struct inode *inode = bdev->bd_inode;
+ int err;
+
+ if (!(mode & FMODE_WRITE)) {
+ err = -EBADF;
+ goto fail1;
+ }
+
+ if (copy_from_user(range, (void __user *)arg, 24)) {
+ err = -EFAULT;
+ goto fail1;
+ }
+
+ start1 = range[0];
+ start2 = range[1];
+ len = range[2];
+ end1 = start1 + len - 1;
+ end2 = start2 + len - 1;
+
+ if ((start1 | start2 | len) & 511)
+ return -EINVAL;
+ if (end1 >= (uint64_t)bdev_nr_bytes(bdev))
+ return -EINVAL;
+ if (end2 >= (uint64_t)bdev_nr_bytes(bdev))
+ return -EINVAL;
+ if (end1 < start1)
+ return -EINVAL;
+ if (end2 < start2)
+ return -EINVAL;
+
+ filemap_invalidate_lock(inode->i_mapping);
+ err = truncate_bdev_range(bdev, mode, start2, end2);
+ if (err)
+ goto fail2;
+
+ err = blkdev_issue_copy(bdev, start1 >> 9, bdev, start2 >> 9, len >> 9, &copied, GFP_KERNEL);
+
+fail2:
+ filemap_invalidate_unlock(inode->i_mapping);
+
+fail1:
+ range[3] = (uint64_t)copied << 9;
+ if (copy_to_user((void __user *)(arg + 24), &range[3], 8))
+ err = -EFAULT;
+
+ return err;
+}
+
static int put_ushort(unsigned short __user *argp, unsigned short val)
{
return put_user(val, argp);
@@ -459,6 +513,8 @@ static int blkdev_common_ioctl(struct bl
return blk_ioctl_zeroout(bdev, mode, arg);
case BLKGETDISKSEQ:
return put_u64(argp, bdev->bd_disk->diskseq);
+ case BLKCOPY:
+ return blk_ioctl_copy(bdev, mode, arg);
case BLKREPORTZONE:
return blkdev_report_zones_ioctl(bdev, mode, cmd, arg);
case BLKRESETZONE:
Index: linux-2.6/include/uapi/linux/fs.h
===================================================================
--- linux-2.6.orig/include/uapi/linux/fs.h 2021-09-23 17:07:02.000000000 +0200
+++ linux-2.6/include/uapi/linux/fs.h 2022-01-27 19:05:46.000000000 +0100
@@ -185,6 +185,7 @@ struct fsxattr {
#define BLKROTATIONAL _IO(0x12,126)
#define BLKZEROOUT _IO(0x12,127)
#define BLKGETDISKSEQ _IOR(0x12,128,__u64)
+#define BLKCOPY _IO(0x12,129)
/*
* A jump here: 130-136 are reserved for zoned block devices
* (see uapi/linux/blkzoned.h)
Index: linux-2.6/block/blk.h
===================================================================
--- linux-2.6.orig/block/blk.h 2022-01-24 15:10:40.000000000 +0100
+++ linux-2.6/block/blk.h 2022-01-29 18:10:28.000000000 +0100
@@ -288,6 +288,9 @@ static inline bool blk_may_split(struct
case REQ_OP_WRITE_ZEROES:
case REQ_OP_WRITE_SAME:
return true; /* non-trivial splitting decisions */
+ case REQ_OP_COPY_READ_TOKEN:
+ case REQ_OP_COPY_WRITE_TOKEN:
+ return false;
default:
break;
}
Index: linux-2.6/block/blk-core.c
===================================================================
--- linux-2.6.orig/block/blk-core.c 2022-01-24 15:10:40.000000000 +0100
+++ linux-2.6/block/blk-core.c 2022-02-01 15:53:39.000000000 +0100
@@ -124,6 +124,8 @@ static const char *const blk_op_name[] =
REQ_OP_NAME(ZONE_APPEND),
REQ_OP_NAME(WRITE_SAME),
REQ_OP_NAME(WRITE_ZEROES),
+ REQ_OP_NAME(COPY_READ_TOKEN),
+ REQ_OP_NAME(COPY_WRITE_TOKEN),
REQ_OP_NAME(DRV_IN),
REQ_OP_NAME(DRV_OUT),
};
@@ -758,6 +760,11 @@ noinline_for_stack bool submit_bio_check
if (!q->limits.max_write_zeroes_sectors)
goto not_supported;
break;
+ case REQ_OP_COPY_READ_TOKEN:
+ case REQ_OP_COPY_WRITE_TOKEN:
+ if (!q->limits.max_copy_sectors)
+ goto not_supported;
+ break;
default:
break;
}
^ permalink raw reply [flat|nested] 272+ messages in thread* [dm-devel] [RFC PATCH 1/3] block: add copy offload support
@ 2022-02-01 18:32 ` Mikulas Patocka
0 siblings, 0 replies; 272+ messages in thread
From: Mikulas Patocka @ 2022-02-01 18:32 UTC (permalink / raw)
To: Javier González
Cc: djwong, linux-nvme, clm, dm-devel, osandov,
msnitzer@redhat.com >> msnitzer@redhat.com,
Bart Van Assche, linux-scsi, Christoph Hellwig, roland,
zach.brown, Chaitanya Kulkarni, josef, linux-block, dsterba,
kbus @imap.gmail.com>> Keith Busch, Frederick.Knight,
Jens Axboe, tytso, Kanchan Joshi,
martin.petersen@oracle.com >> Martin K. Petersen, jack,
linux-fsdevel, lsf-pc
Add generic copy offload support to the block layer.
We add two new bio types: REQ_OP_COPY_READ_TOKEN and
REQ_OP_COPY_WRITE_TOKEN. Their bio vector has one entry - a page
containing the token.
When we need to copy data, we send REQ_OP_COPY_READ_TOKEN to the source
device and then we send REQ_OP_COPY_WRITE_TOKEN to the destination device.
This patch introduces a new ioctl BLKCOPY that submits the copy operation.
BLKCOPY argument has four 64-bit numbers - source offset, destination
offset and length. The last number is returned by the ioctl and it is the
number of bytes that were actually copied.
For in-kernel users, we introduce a function blkdev_issue_copy.
Copying may fail anytime, the caller is required to fallback to explicit
copy.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
---
block/blk-core.c | 7 +++
block/blk-lib.c | 89 ++++++++++++++++++++++++++++++++++++++++++++++
block/blk-settings.c | 12 ++++++
block/blk-sysfs.c | 7 +++
block/blk.h | 3 +
block/ioctl.c | 56 ++++++++++++++++++++++++++++
include/linux/blk_types.h | 4 ++
include/linux/blkdev.h | 18 +++++++++
include/uapi/linux/fs.h | 1
9 files changed, 197 insertions(+)
Index: linux-2.6/block/blk-settings.c
===================================================================
--- linux-2.6.orig/block/blk-settings.c 2022-01-26 19:12:30.000000000 +0100
+++ linux-2.6/block/blk-settings.c 2022-01-27 20:43:27.000000000 +0100
@@ -57,6 +57,7 @@ void blk_set_default_limits(struct queue
lim->misaligned = 0;
lim->zoned = BLK_ZONED_NONE;
lim->zone_write_granularity = 0;
+ lim->max_copy_sectors = 0;
}
EXPORT_SYMBOL(blk_set_default_limits);
@@ -365,6 +366,17 @@ void blk_queue_zone_write_granularity(st
EXPORT_SYMBOL_GPL(blk_queue_zone_write_granularity);
/**
+ * blk_queue_max_copy_sectors - set maximum copy offload sectors for the queue
+ * @q: the request queue for the device
+ * @size: the maximum copy offload sectors
+ */
+void blk_queue_max_copy_sectors(struct request_queue *q, unsigned int size)
+{
+ q->limits.max_copy_sectors = size;
+}
+EXPORT_SYMBOL_GPL(blk_queue_max_copy_sectors);
+
+/**
* blk_queue_alignment_offset - set physical block alignment offset
* @q: the request queue for the device
* @offset: alignment offset in bytes
Index: linux-2.6/include/linux/blkdev.h
===================================================================
--- linux-2.6.orig/include/linux/blkdev.h 2022-01-26 19:12:30.000000000 +0100
+++ linux-2.6/include/linux/blkdev.h 2022-01-29 17:46:03.000000000 +0100
@@ -103,6 +103,7 @@ struct queue_limits {
unsigned int discard_granularity;
unsigned int discard_alignment;
unsigned int zone_write_granularity;
+ unsigned int max_copy_sectors;
unsigned short max_segments;
unsigned short max_integrity_segments;
@@ -706,6 +707,7 @@ extern void blk_queue_max_zone_append_se
extern void blk_queue_physical_block_size(struct request_queue *, unsigned int);
void blk_queue_zone_write_granularity(struct request_queue *q,
unsigned int size);
+void blk_queue_max_copy_sectors(struct request_queue *q, unsigned int size);
extern void blk_queue_alignment_offset(struct request_queue *q,
unsigned int alignment);
void disk_update_readahead(struct gendisk *disk);
@@ -862,6 +864,10 @@ extern int __blkdev_issue_zeroout(struct
extern int blkdev_issue_zeroout(struct block_device *bdev, sector_t sector,
sector_t nr_sects, gfp_t gfp_mask, unsigned flags);
+extern int blkdev_issue_copy(struct block_device *bdev1, sector_t sector1,
+ struct block_device *bdev2, sector_t sector2,
+ sector_t nr_sects, sector_t *copied, gfp_t gfp_mask);
+
static inline int sb_issue_discard(struct super_block *sb, sector_t block,
sector_t nr_blocks, gfp_t gfp_mask, unsigned long flags)
{
@@ -1001,6 +1007,18 @@ bdev_zone_write_granularity(struct block
return queue_zone_write_granularity(bdev_get_queue(bdev));
}
+static inline unsigned int
+queue_max_copy_sectors(const struct request_queue *q)
+{
+ return q->limits.max_copy_sectors;
+}
+
+static inline unsigned int
+bdev_max_copy_sectors(struct block_device *bdev)
+{
+ return queue_max_copy_sectors(bdev_get_queue(bdev));
+}
+
static inline int queue_alignment_offset(const struct request_queue *q)
{
if (q->limits.misaligned)
Index: linux-2.6/block/blk-sysfs.c
===================================================================
--- linux-2.6.orig/block/blk-sysfs.c 2022-01-26 19:12:30.000000000 +0100
+++ linux-2.6/block/blk-sysfs.c 2022-01-26 19:12:30.000000000 +0100
@@ -230,6 +230,11 @@ static ssize_t queue_zone_write_granular
return queue_var_show(queue_zone_write_granularity(q), page);
}
+static ssize_t queue_max_copy_sectors_show(struct request_queue *q, char *page)
+{
+ return queue_var_show(queue_max_copy_sectors(q), page);
+}
+
static ssize_t queue_zone_append_max_show(struct request_queue *q, char *page)
{
unsigned long long max_sectors = q->limits.max_zone_append_sectors;
@@ -591,6 +596,7 @@ QUEUE_RO_ENTRY(queue_write_same_max, "wr
QUEUE_RO_ENTRY(queue_write_zeroes_max, "write_zeroes_max_bytes");
QUEUE_RO_ENTRY(queue_zone_append_max, "zone_append_max_bytes");
QUEUE_RO_ENTRY(queue_zone_write_granularity, "zone_write_granularity");
+QUEUE_RO_ENTRY(queue_max_copy_sectors, "max_copy_sectors");
QUEUE_RO_ENTRY(queue_zoned, "zoned");
QUEUE_RO_ENTRY(queue_nr_zones, "nr_zones");
@@ -647,6 +653,7 @@ static struct attribute *queue_attrs[] =
&queue_write_zeroes_max_entry.attr,
&queue_zone_append_max_entry.attr,
&queue_zone_write_granularity_entry.attr,
+ &queue_max_copy_sectors_entry.attr,
&queue_nonrot_entry.attr,
&queue_zoned_entry.attr,
&queue_nr_zones_entry.attr,
Index: linux-2.6/include/linux/blk_types.h
===================================================================
--- linux-2.6.orig/include/linux/blk_types.h 2022-01-06 18:55:01.000000000 +0100
+++ linux-2.6/include/linux/blk_types.h 2022-01-29 17:47:44.000000000 +0100
@@ -371,6 +371,10 @@ enum req_opf {
/* reset all the zone present on the device */
REQ_OP_ZONE_RESET_ALL = 17,
+ /* copy offload bios */
+ REQ_OP_COPY_READ_TOKEN = 18,
+ REQ_OP_COPY_WRITE_TOKEN = 19,
+
/* Driver private requests */
REQ_OP_DRV_IN = 34,
REQ_OP_DRV_OUT = 35,
Index: linux-2.6/block/blk-lib.c
===================================================================
--- linux-2.6.orig/block/blk-lib.c 2021-08-18 13:59:55.000000000 +0200
+++ linux-2.6/block/blk-lib.c 2022-01-30 17:33:04.000000000 +0100
@@ -440,3 +440,92 @@ retry:
return ret;
}
EXPORT_SYMBOL(blkdev_issue_zeroout);
+
+static void bio_wake_completion(struct bio *bio)
+{
+ struct completion *comp = bio->bi_private;
+ complete(comp);
+}
+
+int blkdev_issue_copy(struct block_device *bdev1, sector_t sector1,
+ struct block_device *bdev2, sector_t sector2,
+ sector_t nr_sects, sector_t *copied, gfp_t gfp_mask)
+{
+ struct page *token;
+ sector_t m;
+ int r = 0;
+ struct completion comp;
+
+ *copied = 0;
+
+ m = min(bdev_max_copy_sectors(bdev1), bdev_max_copy_sectors(bdev2));
+ if (!m)
+ return -EOPNOTSUPP;
+ m = min(m, (sector_t)round_down(UINT_MAX, PAGE_SIZE) >> 9);
+
+ if (unlikely(bdev_read_only(bdev2)))
+ return -EPERM;
+
+ token = alloc_page(gfp_mask);
+ if (unlikely(!token))
+ return -ENOMEM;
+
+ while (nr_sects) {
+ struct bio *read_bio, *write_bio;
+ sector_t this_step = min(nr_sects, m);
+
+ read_bio = bio_alloc(gfp_mask, 1);
+ if (unlikely(!read_bio)) {
+ r = -ENOMEM;
+ break;
+ }
+ bio_set_op_attrs(read_bio, REQ_OP_COPY_READ_TOKEN, REQ_NOMERGE);
+ bio_set_dev(read_bio, bdev1);
+ __bio_add_page(read_bio, token, PAGE_SIZE, 0);
+ read_bio->bi_iter.bi_sector = sector1;
+ read_bio->bi_iter.bi_size = this_step << 9;
+ read_bio->bi_private = ∁
+ read_bio->bi_end_io = bio_wake_completion;
+ init_completion(&comp);
+ submit_bio(read_bio);
+ wait_for_completion(&comp);
+ if (unlikely(read_bio->bi_status != BLK_STS_OK)) {
+ r = blk_status_to_errno(read_bio->bi_status);
+ bio_put(read_bio);
+ break;
+ }
+ bio_put(read_bio);
+
+ write_bio = bio_alloc(gfp_mask, 1);
+ if (unlikely(!write_bio)) {
+ r = -ENOMEM;
+ break;
+ }
+ bio_set_op_attrs(write_bio, REQ_OP_COPY_WRITE_TOKEN, REQ_NOMERGE);
+ bio_set_dev(write_bio, bdev2);
+ __bio_add_page(write_bio, token, PAGE_SIZE, 0);
+ write_bio->bi_iter.bi_sector = sector2;
+ write_bio->bi_iter.bi_size = this_step << 9;
+ write_bio->bi_private = ∁
+ write_bio->bi_end_io = bio_wake_completion;
+ reinit_completion(&comp);
+ submit_bio(write_bio);
+ wait_for_completion(&comp);
+ if (unlikely(write_bio->bi_status != BLK_STS_OK)) {
+ r = blk_status_to_errno(write_bio->bi_status);
+ bio_put(write_bio);
+ break;
+ }
+ bio_put(write_bio);
+
+ sector1 += this_step;
+ sector2 += this_step;
+ nr_sects -= this_step;
+ *copied += this_step;
+ }
+
+ __free_page(token);
+
+ return r;
+}
+EXPORT_SYMBOL(blkdev_issue_copy);
Index: linux-2.6/block/ioctl.c
===================================================================
--- linux-2.6.orig/block/ioctl.c 2022-01-24 15:10:40.000000000 +0100
+++ linux-2.6/block/ioctl.c 2022-01-30 13:43:35.000000000 +0100
@@ -165,6 +165,60 @@ fail:
return err;
}
+static int blk_ioctl_copy(struct block_device *bdev, fmode_t mode,
+ unsigned long arg)
+{
+ uint64_t range[4];
+ uint64_t start1, start2, end1, end2, len;
+ sector_t copied = 0;
+ struct inode *inode = bdev->bd_inode;
+ int err;
+
+ if (!(mode & FMODE_WRITE)) {
+ err = -EBADF;
+ goto fail1;
+ }
+
+ if (copy_from_user(range, (void __user *)arg, 24)) {
+ err = -EFAULT;
+ goto fail1;
+ }
+
+ start1 = range[0];
+ start2 = range[1];
+ len = range[2];
+ end1 = start1 + len - 1;
+ end2 = start2 + len - 1;
+
+ if ((start1 | start2 | len) & 511)
+ return -EINVAL;
+ if (end1 >= (uint64_t)bdev_nr_bytes(bdev))
+ return -EINVAL;
+ if (end2 >= (uint64_t)bdev_nr_bytes(bdev))
+ return -EINVAL;
+ if (end1 < start1)
+ return -EINVAL;
+ if (end2 < start2)
+ return -EINVAL;
+
+ filemap_invalidate_lock(inode->i_mapping);
+ err = truncate_bdev_range(bdev, mode, start2, end2);
+ if (err)
+ goto fail2;
+
+ err = blkdev_issue_copy(bdev, start1 >> 9, bdev, start2 >> 9, len >> 9, &copied, GFP_KERNEL);
+
+fail2:
+ filemap_invalidate_unlock(inode->i_mapping);
+
+fail1:
+ range[3] = (uint64_t)copied << 9;
+ if (copy_to_user((void __user *)(arg + 24), &range[3], 8))
+ err = -EFAULT;
+
+ return err;
+}
+
static int put_ushort(unsigned short __user *argp, unsigned short val)
{
return put_user(val, argp);
@@ -459,6 +513,8 @@ static int blkdev_common_ioctl(struct bl
return blk_ioctl_zeroout(bdev, mode, arg);
case BLKGETDISKSEQ:
return put_u64(argp, bdev->bd_disk->diskseq);
+ case BLKCOPY:
+ return blk_ioctl_copy(bdev, mode, arg);
case BLKREPORTZONE:
return blkdev_report_zones_ioctl(bdev, mode, cmd, arg);
case BLKRESETZONE:
Index: linux-2.6/include/uapi/linux/fs.h
===================================================================
--- linux-2.6.orig/include/uapi/linux/fs.h 2021-09-23 17:07:02.000000000 +0200
+++ linux-2.6/include/uapi/linux/fs.h 2022-01-27 19:05:46.000000000 +0100
@@ -185,6 +185,7 @@ struct fsxattr {
#define BLKROTATIONAL _IO(0x12,126)
#define BLKZEROOUT _IO(0x12,127)
#define BLKGETDISKSEQ _IOR(0x12,128,__u64)
+#define BLKCOPY _IO(0x12,129)
/*
* A jump here: 130-136 are reserved for zoned block devices
* (see uapi/linux/blkzoned.h)
Index: linux-2.6/block/blk.h
===================================================================
--- linux-2.6.orig/block/blk.h 2022-01-24 15:10:40.000000000 +0100
+++ linux-2.6/block/blk.h 2022-01-29 18:10:28.000000000 +0100
@@ -288,6 +288,9 @@ static inline bool blk_may_split(struct
case REQ_OP_WRITE_ZEROES:
case REQ_OP_WRITE_SAME:
return true; /* non-trivial splitting decisions */
+ case REQ_OP_COPY_READ_TOKEN:
+ case REQ_OP_COPY_WRITE_TOKEN:
+ return false;
default:
break;
}
Index: linux-2.6/block/blk-core.c
===================================================================
--- linux-2.6.orig/block/blk-core.c 2022-01-24 15:10:40.000000000 +0100
+++ linux-2.6/block/blk-core.c 2022-02-01 15:53:39.000000000 +0100
@@ -124,6 +124,8 @@ static const char *const blk_op_name[] =
REQ_OP_NAME(ZONE_APPEND),
REQ_OP_NAME(WRITE_SAME),
REQ_OP_NAME(WRITE_ZEROES),
+ REQ_OP_NAME(COPY_READ_TOKEN),
+ REQ_OP_NAME(COPY_WRITE_TOKEN),
REQ_OP_NAME(DRV_IN),
REQ_OP_NAME(DRV_OUT),
};
@@ -758,6 +760,11 @@ noinline_for_stack bool submit_bio_check
if (!q->limits.max_write_zeroes_sectors)
goto not_supported;
break;
+ case REQ_OP_COPY_READ_TOKEN:
+ case REQ_OP_COPY_WRITE_TOKEN:
+ if (!q->limits.max_copy_sectors)
+ goto not_supported;
+ break;
default:
break;
}
--
dm-devel mailing list
dm-devel@redhat.com
https://listman.redhat.com/mailman/listinfo/dm-devel
^ permalink raw reply [flat|nested] 272+ messages in thread* Re: [RFC PATCH 1/3] block: add copy offload support
2022-02-01 18:32 ` [dm-devel] " Mikulas Patocka
@ 2022-02-01 19:18 ` Bart Van Assche
-1 siblings, 0 replies; 272+ messages in thread
From: Bart Van Assche @ 2022-02-01 19:18 UTC (permalink / raw)
To: Mikulas Patocka
Cc: linux-block, linux-scsi, dm-devel, linux-nvme, linux-fsdevel
On 2/1/22 10:32, Mikulas Patocka wrote:
> /**
> + * blk_queue_max_copy_sectors - set maximum copy offload sectors for the queue
> + * @q: the request queue for the device
> + * @size: the maximum copy offload sectors
> + */
> +void blk_queue_max_copy_sectors(struct request_queue *q, unsigned int size)
> +{
> + q->limits.max_copy_sectors = size;
> +}
> +EXPORT_SYMBOL_GPL(blk_queue_max_copy_sectors);
Please either change the unit of 'size' into bytes or change its type
into sector_t.
> +extern int blkdev_issue_copy(struct block_device *bdev1, sector_t sector1,
> + struct block_device *bdev2, sector_t sector2,
> + sector_t nr_sects, sector_t *copied, gfp_t gfp_mask);
> +
Only supporting copying between contiguous LBA ranges seems restrictive
to me. I expect garbage collection by filesystems for UFS devices to
perform better if multiple LBA ranges are submitted as a single SCSI
XCOPY command.
A general comment about the approach: encoding the LBA range information
in a bio payload is not compatible with bio splitting. How can the dm
driver implement copy offloading without the ability to split copy
offload bio's?
> +int blkdev_issue_copy(struct block_device *bdev1, sector_t sector1,
> + struct block_device *bdev2, sector_t sector2,
> + sector_t nr_sects, sector_t *copied, gfp_t gfp_mask)
> +{
> + struct page *token;
> + sector_t m;
> + int r = 0;
> + struct completion comp;
Consider using DECLARE_COMPLETION_ONSTACK() instead of a separate
declaration and init_completion() call.
Thanks,
Bart.
^ permalink raw reply [flat|nested] 272+ messages in thread* Re: [dm-devel] [RFC PATCH 1/3] block: add copy offload support
@ 2022-02-01 19:18 ` Bart Van Assche
0 siblings, 0 replies; 272+ messages in thread
From: Bart Van Assche @ 2022-02-01 19:18 UTC (permalink / raw)
To: Mikulas Patocka
Cc: linux-block, linux-fsdevel, dm-devel, linux-nvme, linux-scsi
On 2/1/22 10:32, Mikulas Patocka wrote:
> /**
> + * blk_queue_max_copy_sectors - set maximum copy offload sectors for the queue
> + * @q: the request queue for the device
> + * @size: the maximum copy offload sectors
> + */
> +void blk_queue_max_copy_sectors(struct request_queue *q, unsigned int size)
> +{
> + q->limits.max_copy_sectors = size;
> +}
> +EXPORT_SYMBOL_GPL(blk_queue_max_copy_sectors);
Please either change the unit of 'size' into bytes or change its type
into sector_t.
> +extern int blkdev_issue_copy(struct block_device *bdev1, sector_t sector1,
> + struct block_device *bdev2, sector_t sector2,
> + sector_t nr_sects, sector_t *copied, gfp_t gfp_mask);
> +
Only supporting copying between contiguous LBA ranges seems restrictive
to me. I expect garbage collection by filesystems for UFS devices to
perform better if multiple LBA ranges are submitted as a single SCSI
XCOPY command.
A general comment about the approach: encoding the LBA range information
in a bio payload is not compatible with bio splitting. How can the dm
driver implement copy offloading without the ability to split copy
offload bio's?
> +int blkdev_issue_copy(struct block_device *bdev1, sector_t sector1,
> + struct block_device *bdev2, sector_t sector2,
> + sector_t nr_sects, sector_t *copied, gfp_t gfp_mask)
> +{
> + struct page *token;
> + sector_t m;
> + int r = 0;
> + struct completion comp;
Consider using DECLARE_COMPLETION_ONSTACK() instead of a separate
declaration and init_completion() call.
Thanks,
Bart.
--
dm-devel mailing list
dm-devel@redhat.com
https://listman.redhat.com/mailman/listinfo/dm-devel
^ permalink raw reply [flat|nested] 272+ messages in thread* Re: [RFC PATCH 1/3] block: add copy offload support
2022-02-01 19:18 ` [dm-devel] " Bart Van Assche
@ 2022-02-03 18:50 ` Mikulas Patocka
-1 siblings, 0 replies; 272+ messages in thread
From: Mikulas Patocka @ 2022-02-03 18:50 UTC (permalink / raw)
To: Bart Van Assche
Cc: linux-block, linux-scsi, dm-devel, linux-nvme, linux-fsdevel
On Tue, 1 Feb 2022, Bart Van Assche wrote:
> On 2/1/22 10:32, Mikulas Patocka wrote:
> > /**
> > + * blk_queue_max_copy_sectors - set maximum copy offload sectors for the
> > queue
> > + * @q: the request queue for the device
> > + * @size: the maximum copy offload sectors
> > + */
> > +void blk_queue_max_copy_sectors(struct request_queue *q, unsigned int size)
> > +{
> > + q->limits.max_copy_sectors = size;
> > +}
> > +EXPORT_SYMBOL_GPL(blk_queue_max_copy_sectors);
>
> Please either change the unit of 'size' into bytes or change its type into
> sector_t.
blk_queue_chunk_sectors, blk_queue_max_discard_sectors,
blk_queue_max_write_same_sectors, blk_queue_max_write_zeroes_sectors,
blk_queue_max_zone_append_sectors also have the unit of sectors and the
argument is "unsigned int". Should blk_queue_max_copy_sectors be
different?
> > +extern int blkdev_issue_copy(struct block_device *bdev1, sector_t sector1,
> > + struct block_device *bdev2, sector_t sector2,
> > + sector_t nr_sects, sector_t *copied, gfp_t gfp_mask);
> > +
>
> Only supporting copying between contiguous LBA ranges seems restrictive to me.
> I expect garbage collection by filesystems for UFS devices to perform better
> if multiple LBA ranges are submitted as a single SCSI XCOPY command.
NVMe has a possibility to copy multiple source ranges into one destination
range. But I think that leveraging this capability would just make the
code excessively complex.
> A general comment about the approach: encoding the LBA range information in a
> bio payload is not compatible with bio splitting. How can the dm driver
> implement copy offloading without the ability to split copy offload bio's?
I don't expect the copy bios to be split.
One possibility is to just return -EOPNOTSUPP and fall back to explicit
copy if the bio crosses dm target boundary (that's what my previous patch
for SCSI XCOPY did).
Another possibility is to return the split boundary in the token and retry
both bios will smaller length. But this approach would prevent us from
submitting the REQ_OP_COPY_WRITE_TOKEN bios asynchronously.
I'm not sure which of these two approaches is better.
> > +int blkdev_issue_copy(struct block_device *bdev1, sector_t sector1,
> > + struct block_device *bdev2, sector_t sector2,
> > + sector_t nr_sects, sector_t *copied, gfp_t gfp_mask)
> > +{
> > + struct page *token;
> > + sector_t m;
> > + int r = 0;
> > + struct completion comp;
>
> Consider using DECLARE_COMPLETION_ONSTACK() instead of a separate declaration
> and init_completion() call.
OK.
> Thanks,
>
> Bart.
Mikulas
^ permalink raw reply [flat|nested] 272+ messages in thread* Re: [dm-devel] [RFC PATCH 1/3] block: add copy offload support
@ 2022-02-03 18:50 ` Mikulas Patocka
0 siblings, 0 replies; 272+ messages in thread
From: Mikulas Patocka @ 2022-02-03 18:50 UTC (permalink / raw)
To: Bart Van Assche
Cc: linux-block, linux-fsdevel, dm-devel, linux-nvme, linux-scsi
On Tue, 1 Feb 2022, Bart Van Assche wrote:
> On 2/1/22 10:32, Mikulas Patocka wrote:
> > /**
> > + * blk_queue_max_copy_sectors - set maximum copy offload sectors for the
> > queue
> > + * @q: the request queue for the device
> > + * @size: the maximum copy offload sectors
> > + */
> > +void blk_queue_max_copy_sectors(struct request_queue *q, unsigned int size)
> > +{
> > + q->limits.max_copy_sectors = size;
> > +}
> > +EXPORT_SYMBOL_GPL(blk_queue_max_copy_sectors);
>
> Please either change the unit of 'size' into bytes or change its type into
> sector_t.
blk_queue_chunk_sectors, blk_queue_max_discard_sectors,
blk_queue_max_write_same_sectors, blk_queue_max_write_zeroes_sectors,
blk_queue_max_zone_append_sectors also have the unit of sectors and the
argument is "unsigned int". Should blk_queue_max_copy_sectors be
different?
> > +extern int blkdev_issue_copy(struct block_device *bdev1, sector_t sector1,
> > + struct block_device *bdev2, sector_t sector2,
> > + sector_t nr_sects, sector_t *copied, gfp_t gfp_mask);
> > +
>
> Only supporting copying between contiguous LBA ranges seems restrictive to me.
> I expect garbage collection by filesystems for UFS devices to perform better
> if multiple LBA ranges are submitted as a single SCSI XCOPY command.
NVMe has a possibility to copy multiple source ranges into one destination
range. But I think that leveraging this capability would just make the
code excessively complex.
> A general comment about the approach: encoding the LBA range information in a
> bio payload is not compatible with bio splitting. How can the dm driver
> implement copy offloading without the ability to split copy offload bio's?
I don't expect the copy bios to be split.
One possibility is to just return -EOPNOTSUPP and fall back to explicit
copy if the bio crosses dm target boundary (that's what my previous patch
for SCSI XCOPY did).
Another possibility is to return the split boundary in the token and retry
both bios will smaller length. But this approach would prevent us from
submitting the REQ_OP_COPY_WRITE_TOKEN bios asynchronously.
I'm not sure which of these two approaches is better.
> > +int blkdev_issue_copy(struct block_device *bdev1, sector_t sector1,
> > + struct block_device *bdev2, sector_t sector2,
> > + sector_t nr_sects, sector_t *copied, gfp_t gfp_mask)
> > +{
> > + struct page *token;
> > + sector_t m;
> > + int r = 0;
> > + struct completion comp;
>
> Consider using DECLARE_COMPLETION_ONSTACK() instead of a separate declaration
> and init_completion() call.
OK.
> Thanks,
>
> Bart.
Mikulas
--
dm-devel mailing list
dm-devel@redhat.com
https://listman.redhat.com/mailman/listinfo/dm-devel
^ permalink raw reply [flat|nested] 272+ messages in thread* Re: [RFC PATCH 1/3] block: add copy offload support
2022-02-03 18:50 ` [dm-devel] " Mikulas Patocka
@ 2022-02-03 20:11 ` Keith Busch
-1 siblings, 0 replies; 272+ messages in thread
From: Keith Busch @ 2022-02-03 20:11 UTC (permalink / raw)
To: Mikulas Patocka
Cc: Bart Van Assche, linux-block, linux-scsi, dm-devel, linux-nvme,
linux-fsdevel
On Thu, Feb 03, 2022 at 01:50:06PM -0500, Mikulas Patocka wrote:
> On Tue, 1 Feb 2022, Bart Van Assche wrote:
> > Only supporting copying between contiguous LBA ranges seems restrictive to me.
> > I expect garbage collection by filesystems for UFS devices to perform better
> > if multiple LBA ranges are submitted as a single SCSI XCOPY command.
>
> NVMe has a possibility to copy multiple source ranges into one destination
> range. But I think that leveraging this capability would just make the
> code excessively complex.
The point is to defrag discontiguous blocks into a single range. The
capability loses a major value proposition without multiple sources.
^ permalink raw reply [flat|nested] 272+ messages in thread
* Re: [dm-devel] [RFC PATCH 1/3] block: add copy offload support
@ 2022-02-03 20:11 ` Keith Busch
0 siblings, 0 replies; 272+ messages in thread
From: Keith Busch @ 2022-02-03 20:11 UTC (permalink / raw)
To: Mikulas Patocka
Cc: Bart Van Assche, linux-scsi, linux-nvme, linux-block, dm-devel,
linux-fsdevel
On Thu, Feb 03, 2022 at 01:50:06PM -0500, Mikulas Patocka wrote:
> On Tue, 1 Feb 2022, Bart Van Assche wrote:
> > Only supporting copying between contiguous LBA ranges seems restrictive to me.
> > I expect garbage collection by filesystems for UFS devices to perform better
> > if multiple LBA ranges are submitted as a single SCSI XCOPY command.
>
> NVMe has a possibility to copy multiple source ranges into one destination
> range. But I think that leveraging this capability would just make the
> code excessively complex.
The point is to defrag discontiguous blocks into a single range. The
capability loses a major value proposition without multiple sources.
--
dm-devel mailing list
dm-devel@redhat.com
https://listman.redhat.com/mailman/listinfo/dm-devel
^ permalink raw reply [flat|nested] 272+ messages in thread
* Re: [RFC PATCH 1/3] block: add copy offload support
2022-02-03 18:50 ` [dm-devel] " Mikulas Patocka
@ 2022-02-03 22:49 ` Bart Van Assche
-1 siblings, 0 replies; 272+ messages in thread
From: Bart Van Assche @ 2022-02-03 22:49 UTC (permalink / raw)
To: Mikulas Patocka
Cc: linux-block, linux-scsi, dm-devel, linux-nvme, linux-fsdevel
On 2/3/22 10:50, Mikulas Patocka wrote:
> On Tue, 1 Feb 2022, Bart Van Assche wrote:
>> On 2/1/22 10:32, Mikulas Patocka wrote:
>>> /**
>>> + * blk_queue_max_copy_sectors - set maximum copy offload sectors for the
>>> queue
>>> + * @q: the request queue for the device
>>> + * @size: the maximum copy offload sectors
>>> + */
>>> +void blk_queue_max_copy_sectors(struct request_queue *q, unsigned int size)
>>> +{
>>> + q->limits.max_copy_sectors = size;
>>> +}
>>> +EXPORT_SYMBOL_GPL(blk_queue_max_copy_sectors);
>>
>> Please either change the unit of 'size' into bytes or change its type into
>> sector_t.
>
> blk_queue_chunk_sectors, blk_queue_max_discard_sectors,
> blk_queue_max_write_same_sectors, blk_queue_max_write_zeroes_sectors,
> blk_queue_max_zone_append_sectors also have the unit of sectors and the
> argument is "unsigned int". Should blk_queue_max_copy_sectors be
> different?
As far as I know using the type sector_t for variables that represent a
number of sectors is a widely followed convention:
$ git grep -w sector_t | wc -l
2575
I would appreciate it if that convention would be used consistently,
even if that means modifying existing code.
Thanks,
Bart.
^ permalink raw reply [flat|nested] 272+ messages in thread* Re: [dm-devel] [RFC PATCH 1/3] block: add copy offload support
@ 2022-02-03 22:49 ` Bart Van Assche
0 siblings, 0 replies; 272+ messages in thread
From: Bart Van Assche @ 2022-02-03 22:49 UTC (permalink / raw)
To: Mikulas Patocka
Cc: linux-block, linux-fsdevel, dm-devel, linux-nvme, linux-scsi
On 2/3/22 10:50, Mikulas Patocka wrote:
> On Tue, 1 Feb 2022, Bart Van Assche wrote:
>> On 2/1/22 10:32, Mikulas Patocka wrote:
>>> /**
>>> + * blk_queue_max_copy_sectors - set maximum copy offload sectors for the
>>> queue
>>> + * @q: the request queue for the device
>>> + * @size: the maximum copy offload sectors
>>> + */
>>> +void blk_queue_max_copy_sectors(struct request_queue *q, unsigned int size)
>>> +{
>>> + q->limits.max_copy_sectors = size;
>>> +}
>>> +EXPORT_SYMBOL_GPL(blk_queue_max_copy_sectors);
>>
>> Please either change the unit of 'size' into bytes or change its type into
>> sector_t.
>
> blk_queue_chunk_sectors, blk_queue_max_discard_sectors,
> blk_queue_max_write_same_sectors, blk_queue_max_write_zeroes_sectors,
> blk_queue_max_zone_append_sectors also have the unit of sectors and the
> argument is "unsigned int". Should blk_queue_max_copy_sectors be
> different?
As far as I know using the type sector_t for variables that represent a
number of sectors is a widely followed convention:
$ git grep -w sector_t | wc -l
2575
I would appreciate it if that convention would be used consistently,
even if that means modifying existing code.
Thanks,
Bart.
--
dm-devel mailing list
dm-devel@redhat.com
https://listman.redhat.com/mailman/listinfo/dm-devel
^ permalink raw reply [flat|nested] 272+ messages in thread* Re: [RFC PATCH 1/3] block: add copy offload support
2022-02-03 22:49 ` [dm-devel] " Bart Van Assche
@ 2022-02-04 12:09 ` Mikulas Patocka
-1 siblings, 0 replies; 272+ messages in thread
From: Mikulas Patocka @ 2022-02-04 12:09 UTC (permalink / raw)
To: Bart Van Assche, Jens Axboe
Cc: linux-block, linux-scsi, dm-devel, linux-nvme, linux-fsdevel
On Thu, 3 Feb 2022, Bart Van Assche wrote:
> On 2/3/22 10:50, Mikulas Patocka wrote:
> > On Tue, 1 Feb 2022, Bart Van Assche wrote:
> > > On 2/1/22 10:32, Mikulas Patocka wrote:
> > > > /**
> > > > + * blk_queue_max_copy_sectors - set maximum copy offload sectors for
> > > > the
> > > > queue
> > > > + * @q: the request queue for the device
> > > > + * @size: the maximum copy offload sectors
> > > > + */
> > > > +void blk_queue_max_copy_sectors(struct request_queue *q, unsigned int
> > > > size)
> > > > +{
> > > > + q->limits.max_copy_sectors = size;
> > > > +}
> > > > +EXPORT_SYMBOL_GPL(blk_queue_max_copy_sectors);
> > >
> > > Please either change the unit of 'size' into bytes or change its type into
> > > sector_t.
> >
> > blk_queue_chunk_sectors, blk_queue_max_discard_sectors,
> > blk_queue_max_write_same_sectors, blk_queue_max_write_zeroes_sectors,
> > blk_queue_max_zone_append_sectors also have the unit of sectors and the
> > argument is "unsigned int". Should blk_queue_max_copy_sectors be
> > different?
>
> As far as I know using the type sector_t for variables that represent a number
> of sectors is a widely followed convention:
>
> $ git grep -w sector_t | wc -l
> 2575
>
> I would appreciate it if that convention would be used consistently, even if
> that means modifying existing code.
>
> Thanks,
>
> Bart.
Changing the sector limit variables in struct queue_limits from unsigned
int to sector_t would increase the size of the structure and its cache
footprint.
And we can't send bios larger than 4GiB anyway because bi_size is 32-bit.
Jens, what do you think about it? Should the sectors limits be sector_t?
Mikulas
^ permalink raw reply [flat|nested] 272+ messages in thread* Re: [dm-devel] [RFC PATCH 1/3] block: add copy offload support
@ 2022-02-04 12:09 ` Mikulas Patocka
0 siblings, 0 replies; 272+ messages in thread
From: Mikulas Patocka @ 2022-02-04 12:09 UTC (permalink / raw)
To: Bart Van Assche, Jens Axboe
Cc: linux-block, linux-fsdevel, dm-devel, linux-nvme, linux-scsi
On Thu, 3 Feb 2022, Bart Van Assche wrote:
> On 2/3/22 10:50, Mikulas Patocka wrote:
> > On Tue, 1 Feb 2022, Bart Van Assche wrote:
> > > On 2/1/22 10:32, Mikulas Patocka wrote:
> > > > /**
> > > > + * blk_queue_max_copy_sectors - set maximum copy offload sectors for
> > > > the
> > > > queue
> > > > + * @q: the request queue for the device
> > > > + * @size: the maximum copy offload sectors
> > > > + */
> > > > +void blk_queue_max_copy_sectors(struct request_queue *q, unsigned int
> > > > size)
> > > > +{
> > > > + q->limits.max_copy_sectors = size;
> > > > +}
> > > > +EXPORT_SYMBOL_GPL(blk_queue_max_copy_sectors);
> > >
> > > Please either change the unit of 'size' into bytes or change its type into
> > > sector_t.
> >
> > blk_queue_chunk_sectors, blk_queue_max_discard_sectors,
> > blk_queue_max_write_same_sectors, blk_queue_max_write_zeroes_sectors,
> > blk_queue_max_zone_append_sectors also have the unit of sectors and the
> > argument is "unsigned int". Should blk_queue_max_copy_sectors be
> > different?
>
> As far as I know using the type sector_t for variables that represent a number
> of sectors is a widely followed convention:
>
> $ git grep -w sector_t | wc -l
> 2575
>
> I would appreciate it if that convention would be used consistently, even if
> that means modifying existing code.
>
> Thanks,
>
> Bart.
Changing the sector limit variables in struct queue_limits from unsigned
int to sector_t would increase the size of the structure and its cache
footprint.
And we can't send bios larger than 4GiB anyway because bi_size is 32-bit.
Jens, what do you think about it? Should the sectors limits be sector_t?
Mikulas
--
dm-devel mailing list
dm-devel@redhat.com
https://listman.redhat.com/mailman/listinfo/dm-devel
^ permalink raw reply [flat|nested] 272+ messages in thread* Re: [RFC PATCH 1/3] block: add copy offload support
2022-02-04 12:09 ` [dm-devel] " Mikulas Patocka
@ 2022-02-04 13:34 ` Jens Axboe
-1 siblings, 0 replies; 272+ messages in thread
From: Jens Axboe @ 2022-02-04 13:34 UTC (permalink / raw)
To: Mikulas Patocka, Bart Van Assche
Cc: linux-block, linux-scsi, dm-devel, linux-nvme, linux-fsdevel
On 2/4/22 5:09 AM, Mikulas Patocka wrote:
>
>
> On Thu, 3 Feb 2022, Bart Van Assche wrote:
>
>> On 2/3/22 10:50, Mikulas Patocka wrote:
>>> On Tue, 1 Feb 2022, Bart Van Assche wrote:
>>>> On 2/1/22 10:32, Mikulas Patocka wrote:
>>>>> /**
>>>>> + * blk_queue_max_copy_sectors - set maximum copy offload sectors for
>>>>> the
>>>>> queue
>>>>> + * @q: the request queue for the device
>>>>> + * @size: the maximum copy offload sectors
>>>>> + */
>>>>> +void blk_queue_max_copy_sectors(struct request_queue *q, unsigned int
>>>>> size)
>>>>> +{
>>>>> + q->limits.max_copy_sectors = size;
>>>>> +}
>>>>> +EXPORT_SYMBOL_GPL(blk_queue_max_copy_sectors);
>>>>
>>>> Please either change the unit of 'size' into bytes or change its type into
>>>> sector_t.
>>>
>>> blk_queue_chunk_sectors, blk_queue_max_discard_sectors,
>>> blk_queue_max_write_same_sectors, blk_queue_max_write_zeroes_sectors,
>>> blk_queue_max_zone_append_sectors also have the unit of sectors and the
>>> argument is "unsigned int". Should blk_queue_max_copy_sectors be
>>> different?
>>
>> As far as I know using the type sector_t for variables that represent a number
>> of sectors is a widely followed convention:
>>
>> $ git grep -w sector_t | wc -l
>> 2575
>>
>> I would appreciate it if that convention would be used consistently, even if
>> that means modifying existing code.
>>
>> Thanks,
>>
>> Bart.
>
> Changing the sector limit variables in struct queue_limits from
> unsigned int to sector_t would increase the size of the structure and
> its cache footprint.
>
> And we can't send bios larger than 4GiB anyway because bi_size is
> 32-bit.
>
> Jens, what do you think about it? Should the sectors limits be
> sector_t?
Why make it larger than it needs to?
--
Jens Axboe
^ permalink raw reply [flat|nested] 272+ messages in thread* Re: [dm-devel] [RFC PATCH 1/3] block: add copy offload support
@ 2022-02-04 13:34 ` Jens Axboe
0 siblings, 0 replies; 272+ messages in thread
From: Jens Axboe @ 2022-02-04 13:34 UTC (permalink / raw)
To: Mikulas Patocka, Bart Van Assche
Cc: linux-block, linux-fsdevel, dm-devel, linux-nvme, linux-scsi
On 2/4/22 5:09 AM, Mikulas Patocka wrote:
>
>
> On Thu, 3 Feb 2022, Bart Van Assche wrote:
>
>> On 2/3/22 10:50, Mikulas Patocka wrote:
>>> On Tue, 1 Feb 2022, Bart Van Assche wrote:
>>>> On 2/1/22 10:32, Mikulas Patocka wrote:
>>>>> /**
>>>>> + * blk_queue_max_copy_sectors - set maximum copy offload sectors for
>>>>> the
>>>>> queue
>>>>> + * @q: the request queue for the device
>>>>> + * @size: the maximum copy offload sectors
>>>>> + */
>>>>> +void blk_queue_max_copy_sectors(struct request_queue *q, unsigned int
>>>>> size)
>>>>> +{
>>>>> + q->limits.max_copy_sectors = size;
>>>>> +}
>>>>> +EXPORT_SYMBOL_GPL(blk_queue_max_copy_sectors);
>>>>
>>>> Please either change the unit of 'size' into bytes or change its type into
>>>> sector_t.
>>>
>>> blk_queue_chunk_sectors, blk_queue_max_discard_sectors,
>>> blk_queue_max_write_same_sectors, blk_queue_max_write_zeroes_sectors,
>>> blk_queue_max_zone_append_sectors also have the unit of sectors and the
>>> argument is "unsigned int". Should blk_queue_max_copy_sectors be
>>> different?
>>
>> As far as I know using the type sector_t for variables that represent a number
>> of sectors is a widely followed convention:
>>
>> $ git grep -w sector_t | wc -l
>> 2575
>>
>> I would appreciate it if that convention would be used consistently, even if
>> that means modifying existing code.
>>
>> Thanks,
>>
>> Bart.
>
> Changing the sector limit variables in struct queue_limits from
> unsigned int to sector_t would increase the size of the structure and
> its cache footprint.
>
> And we can't send bios larger than 4GiB anyway because bi_size is
> 32-bit.
>
> Jens, what do you think about it? Should the sectors limits be
> sector_t?
Why make it larger than it needs to?
--
Jens Axboe
--
dm-devel mailing list
dm-devel@redhat.com
https://listman.redhat.com/mailman/listinfo/dm-devel
^ permalink raw reply [flat|nested] 272+ messages in thread
* Re: [RFC PATCH 1/3] block: add copy offload support
2022-02-01 18:32 ` [dm-devel] " Mikulas Patocka
@ 2022-02-02 16:21 ` Keith Busch
-1 siblings, 0 replies; 272+ messages in thread
From: Keith Busch @ 2022-02-02 16:21 UTC (permalink / raw)
To: Mikulas Patocka
Cc: Javier González, Chaitanya Kulkarni, linux-block,
linux-scsi, dm-devel, linux-nvme, linux-fsdevel, Jens Axboe,
msnitzer@redhat.com >> msnitzer@redhat.com,
Bart Van Assche,
martin.petersen@oracle.com >> Martin K. Petersen, roland,
Hannes Reinecke, Christoph Hellwig, Frederick.Knight, zach.brown,
osandov, lsf-pc, djwong, josef, clm, dsterba, tytso, jack,
Kanchan Joshi
On Tue, Feb 01, 2022 at 01:32:29PM -0500, Mikulas Patocka wrote:
> +int blkdev_issue_copy(struct block_device *bdev1, sector_t sector1,
> + struct block_device *bdev2, sector_t sector2,
> + sector_t nr_sects, sector_t *copied, gfp_t gfp_mask)
> +{
> + struct page *token;
> + sector_t m;
> + int r = 0;
> + struct completion comp;
> +
> + *copied = 0;
> +
> + m = min(bdev_max_copy_sectors(bdev1), bdev_max_copy_sectors(bdev2));
> + if (!m)
> + return -EOPNOTSUPP;
> + m = min(m, (sector_t)round_down(UINT_MAX, PAGE_SIZE) >> 9);
> +
> + if (unlikely(bdev_read_only(bdev2)))
> + return -EPERM;
> +
> + token = alloc_page(gfp_mask);
> + if (unlikely(!token))
> + return -ENOMEM;
> +
> + while (nr_sects) {
> + struct bio *read_bio, *write_bio;
> + sector_t this_step = min(nr_sects, m);
> +
> + read_bio = bio_alloc(gfp_mask, 1);
> + if (unlikely(!read_bio)) {
> + r = -ENOMEM;
> + break;
> + }
> + bio_set_op_attrs(read_bio, REQ_OP_COPY_READ_TOKEN, REQ_NOMERGE);
> + bio_set_dev(read_bio, bdev1);
> + __bio_add_page(read_bio, token, PAGE_SIZE, 0);
You have this "token" payload as driver specific data, but there's no
check that bdev1 and bdev2 subscribe to the same driver specific format.
I thought we discussed defining something like a "copy domain" that
establishes which block devices can offload copy operations to/from each
other, and that should be checked before proceeding with the copy
operation.
^ permalink raw reply [flat|nested] 272+ messages in thread* Re: [dm-devel] [RFC PATCH 1/3] block: add copy offload support
@ 2022-02-02 16:21 ` Keith Busch
0 siblings, 0 replies; 272+ messages in thread
From: Keith Busch @ 2022-02-02 16:21 UTC (permalink / raw)
To: Mikulas Patocka
Cc: djwong, linux-nvme, clm, dm-devel, osandov, Javier González,
Bart Van Assche, linux-scsi, Christoph Hellwig, roland,
zach.brown, Chaitanya Kulkarni,
msnitzer@redhat.com >> msnitzer@redhat.com, josef,
linux-block, dsterba, Frederick.Knight, Jens Axboe, tytso,
Kanchan Joshi,
martin.petersen@oracle.com >> Martin K. Petersen, jack,
linux-fsdevel, lsf-pc
On Tue, Feb 01, 2022 at 01:32:29PM -0500, Mikulas Patocka wrote:
> +int blkdev_issue_copy(struct block_device *bdev1, sector_t sector1,
> + struct block_device *bdev2, sector_t sector2,
> + sector_t nr_sects, sector_t *copied, gfp_t gfp_mask)
> +{
> + struct page *token;
> + sector_t m;
> + int r = 0;
> + struct completion comp;
> +
> + *copied = 0;
> +
> + m = min(bdev_max_copy_sectors(bdev1), bdev_max_copy_sectors(bdev2));
> + if (!m)
> + return -EOPNOTSUPP;
> + m = min(m, (sector_t)round_down(UINT_MAX, PAGE_SIZE) >> 9);
> +
> + if (unlikely(bdev_read_only(bdev2)))
> + return -EPERM;
> +
> + token = alloc_page(gfp_mask);
> + if (unlikely(!token))
> + return -ENOMEM;
> +
> + while (nr_sects) {
> + struct bio *read_bio, *write_bio;
> + sector_t this_step = min(nr_sects, m);
> +
> + read_bio = bio_alloc(gfp_mask, 1);
> + if (unlikely(!read_bio)) {
> + r = -ENOMEM;
> + break;
> + }
> + bio_set_op_attrs(read_bio, REQ_OP_COPY_READ_TOKEN, REQ_NOMERGE);
> + bio_set_dev(read_bio, bdev1);
> + __bio_add_page(read_bio, token, PAGE_SIZE, 0);
You have this "token" payload as driver specific data, but there's no
check that bdev1 and bdev2 subscribe to the same driver specific format.
I thought we discussed defining something like a "copy domain" that
establishes which block devices can offload copy operations to/from each
other, and that should be checked before proceeding with the copy
operation.
--
dm-devel mailing list
dm-devel@redhat.com
https://listman.redhat.com/mailman/listinfo/dm-devel
^ permalink raw reply [flat|nested] 272+ messages in thread* Re: [RFC PATCH 1/3] block: add copy offload support
2022-02-02 16:21 ` [dm-devel] " Keith Busch
@ 2022-02-02 16:40 ` Mikulas Patocka
-1 siblings, 0 replies; 272+ messages in thread
From: Mikulas Patocka @ 2022-02-02 16:40 UTC (permalink / raw)
To: Keith Busch
Cc: Javier González, Chaitanya Kulkarni, linux-block,
linux-scsi, dm-devel, linux-nvme, linux-fsdevel, Jens Axboe,
msnitzer@redhat.com >> msnitzer@redhat.com,
Bart Van Assche,
martin.petersen@oracle.com >> Martin K. Petersen, roland,
Hannes Reinecke, Christoph Hellwig, Frederick.Knight, zach.brown,
osandov, lsf-pc, djwong, josef, clm, dsterba, tytso, jack,
Kanchan Joshi
On Wed, 2 Feb 2022, Keith Busch wrote:
> On Tue, Feb 01, 2022 at 01:32:29PM -0500, Mikulas Patocka wrote:
> > +int blkdev_issue_copy(struct block_device *bdev1, sector_t sector1,
> > + struct block_device *bdev2, sector_t sector2,
> > + sector_t nr_sects, sector_t *copied, gfp_t gfp_mask)
> > +{
> > + struct page *token;
> > + sector_t m;
> > + int r = 0;
> > + struct completion comp;
> > +
> > + *copied = 0;
> > +
> > + m = min(bdev_max_copy_sectors(bdev1), bdev_max_copy_sectors(bdev2));
> > + if (!m)
> > + return -EOPNOTSUPP;
> > + m = min(m, (sector_t)round_down(UINT_MAX, PAGE_SIZE) >> 9);
> > +
> > + if (unlikely(bdev_read_only(bdev2)))
> > + return -EPERM;
> > +
> > + token = alloc_page(gfp_mask);
> > + if (unlikely(!token))
> > + return -ENOMEM;
> > +
> > + while (nr_sects) {
> > + struct bio *read_bio, *write_bio;
> > + sector_t this_step = min(nr_sects, m);
> > +
> > + read_bio = bio_alloc(gfp_mask, 1);
> > + if (unlikely(!read_bio)) {
> > + r = -ENOMEM;
> > + break;
> > + }
> > + bio_set_op_attrs(read_bio, REQ_OP_COPY_READ_TOKEN, REQ_NOMERGE);
> > + bio_set_dev(read_bio, bdev1);
> > + __bio_add_page(read_bio, token, PAGE_SIZE, 0);
>
> You have this "token" payload as driver specific data, but there's no
> check that bdev1 and bdev2 subscribe to the same driver specific format.
>
> I thought we discussed defining something like a "copy domain" that
> establishes which block devices can offload copy operations to/from each
> other, and that should be checked before proceeding with the copy
> operation.
There is nvme_setup_read_token that fills in the token:
memcpy(token->subsys, "nvme", 4);
token->ns = ns;
token->src_sector = bio->bi_iter.bi_sector;
token->sectors = bio->bi_iter.bi_size >> 9;
There is nvme_setup_write_token that checks these values:
if (unlikely(memcmp(token->subsys, "nvme", 4)))
return BLK_STS_NOTSUPP;
if (unlikely(token->ns != ns))
return BLK_STS_NOTSUPP;
So, if we attempt to copy data between the nvme subsystem and the scsi
subsystem, the "subsys" check will fail. If we attempt to copy data
between different nvme namespaces, the "ns" check will fail.
If the nvme standard gets extended with cross-namespace copies, we can
check in nvme_setup_write_token if we can copy between the source and
destination namespace.
Mikulas
^ permalink raw reply [flat|nested] 272+ messages in thread* Re: [dm-devel] [RFC PATCH 1/3] block: add copy offload support
@ 2022-02-02 16:40 ` Mikulas Patocka
0 siblings, 0 replies; 272+ messages in thread
From: Mikulas Patocka @ 2022-02-02 16:40 UTC (permalink / raw)
To: Keith Busch
Cc: djwong, linux-nvme, clm, dm-devel, osandov, Javier González,
Bart Van Assche, linux-scsi, Christoph Hellwig, roland,
zach.brown, Chaitanya Kulkarni,
msnitzer@redhat.com >> msnitzer@redhat.com, josef,
linux-block, dsterba, Frederick.Knight, Jens Axboe, tytso,
Kanchan Joshi,
martin.petersen@oracle.com >> Martin K. Petersen, jack,
linux-fsdevel, lsf-pc
On Wed, 2 Feb 2022, Keith Busch wrote:
> On Tue, Feb 01, 2022 at 01:32:29PM -0500, Mikulas Patocka wrote:
> > +int blkdev_issue_copy(struct block_device *bdev1, sector_t sector1,
> > + struct block_device *bdev2, sector_t sector2,
> > + sector_t nr_sects, sector_t *copied, gfp_t gfp_mask)
> > +{
> > + struct page *token;
> > + sector_t m;
> > + int r = 0;
> > + struct completion comp;
> > +
> > + *copied = 0;
> > +
> > + m = min(bdev_max_copy_sectors(bdev1), bdev_max_copy_sectors(bdev2));
> > + if (!m)
> > + return -EOPNOTSUPP;
> > + m = min(m, (sector_t)round_down(UINT_MAX, PAGE_SIZE) >> 9);
> > +
> > + if (unlikely(bdev_read_only(bdev2)))
> > + return -EPERM;
> > +
> > + token = alloc_page(gfp_mask);
> > + if (unlikely(!token))
> > + return -ENOMEM;
> > +
> > + while (nr_sects) {
> > + struct bio *read_bio, *write_bio;
> > + sector_t this_step = min(nr_sects, m);
> > +
> > + read_bio = bio_alloc(gfp_mask, 1);
> > + if (unlikely(!read_bio)) {
> > + r = -ENOMEM;
> > + break;
> > + }
> > + bio_set_op_attrs(read_bio, REQ_OP_COPY_READ_TOKEN, REQ_NOMERGE);
> > + bio_set_dev(read_bio, bdev1);
> > + __bio_add_page(read_bio, token, PAGE_SIZE, 0);
>
> You have this "token" payload as driver specific data, but there's no
> check that bdev1 and bdev2 subscribe to the same driver specific format.
>
> I thought we discussed defining something like a "copy domain" that
> establishes which block devices can offload copy operations to/from each
> other, and that should be checked before proceeding with the copy
> operation.
There is nvme_setup_read_token that fills in the token:
memcpy(token->subsys, "nvme", 4);
token->ns = ns;
token->src_sector = bio->bi_iter.bi_sector;
token->sectors = bio->bi_iter.bi_size >> 9;
There is nvme_setup_write_token that checks these values:
if (unlikely(memcmp(token->subsys, "nvme", 4)))
return BLK_STS_NOTSUPP;
if (unlikely(token->ns != ns))
return BLK_STS_NOTSUPP;
So, if we attempt to copy data between the nvme subsystem and the scsi
subsystem, the "subsys" check will fail. If we attempt to copy data
between different nvme namespaces, the "ns" check will fail.
If the nvme standard gets extended with cross-namespace copies, we can
check in nvme_setup_write_token if we can copy between the source and
destination namespace.
Mikulas
--
dm-devel mailing list
dm-devel@redhat.com
https://listman.redhat.com/mailman/listinfo/dm-devel
^ permalink raw reply [flat|nested] 272+ messages in thread
* RE: [RFC PATCH 1/3] block: add copy offload support
2022-02-02 16:21 ` [dm-devel] " Keith Busch
@ 2022-02-02 18:40 ` Knight, Frederick
-1 siblings, 0 replies; 272+ messages in thread
From: Knight, Frederick @ 2022-02-02 18:40 UTC (permalink / raw)
To: Keith Busch, Mikulas Patocka
Cc: Javier González, Chaitanya Kulkarni, linux-block,
linux-scsi, dm-devel, linux-nvme, linux-fsdevel, Jens Axboe,
msnitzer@redhat.com >> msnitzer@redhat.com,
Bart Van Assche,
martin.petersen@oracle.com >> Martin K. Petersen, roland,
Hannes Reinecke, Christoph Hellwig, zach.brown, osandov, lsf-pc,
djwong, josef, clm, dsterba, tytso, jack, Kanchan Joshi
Just FYI about copy domains.
SCSI already has copy domains defined (it is optional in the standard). Third-party Copy Descriptor - Copy Group Identifier. Here's the SCSI text:
A Copy Group is a set of logical units that have a high probability of using high performance methods (e.g.,
copy on write snapshot) for third-party copy operations involving logical units that are in the same Copy
Group. Each logical unit may be a member of zero or one Copy Group. A logical unit indicates membership in
a Copy Group using the Copy Group Identifier third-party copy descriptor (see 7.7.18.13).
If a third-party copy operation involves logical units that are in different Copy Groups, then that third-party copy
operation has a high probability of using low performance methods (e.g., copy manager read operations from
the source CSCD or copy manager write operations to the destination CSCD).
NVMe today can only copy between LBAs on the SAME Namespace. There is a new project just getting started to allow copy across namespaces in the same NVM subsystem (included as part of that project is to define how the copy domains will work). So for NVMe, copy domains are still a work in progress.
Just FYI.
Fred
-----Original Message-----
From: Keith Busch <kbusch@kernel.org>
Sent: Wednesday, February 2, 2022 11:22 AM
To: Mikulas Patocka <mpatocka@redhat.com>
Cc: Javier González <javier@javigon.com>; Chaitanya Kulkarni <chaitanyak@nvidia.com>; linux-block@vger.kernel.org; linux-scsi@vger.kernel.org; dm-devel@redhat.com; linux-nvme@lists.infradead.org; linux-fsdevel <linux-fsdevel@vger.kernel.org>; Jens Axboe <axboe@kernel.dk>; msnitzer@redhat.com >> msnitzer@redhat.com <msnitzer@redhat.com>; Bart Van Assche <bvanassche@acm.org>; martin.petersen@oracle.com >> Martin K. Petersen <martin.petersen@oracle.com>; roland@purestorage.com; Hannes Reinecke <hare@suse.de>; Christoph Hellwig <hch@lst.de>; Knight, Frederick <Frederick.Knight@netapp.com>; zach.brown@ni.com; osandov@fb.com; lsf-pc@lists.linux-foundation.org; djwong@kernel.org; josef@toxicpanda.com; clm@fb.com; dsterba@suse.com; tytso@mit.edu; jack@suse.com; Kanchan Joshi <joshi.k@samsung.com>
Subject: Re: [RFC PATCH 1/3] block: add copy offload support
NetApp Security WARNING: This is an external email. Do not click links or open attachments unless you recognize the sender and know the content is safe.
On Tue, Feb 01, 2022 at 01:32:29PM -0500, Mikulas Patocka wrote:
> +int blkdev_issue_copy(struct block_device *bdev1, sector_t sector1,
> + struct block_device *bdev2, sector_t sector2,
> + sector_t nr_sects, sector_t *copied, gfp_t
> +gfp_mask) {
> + struct page *token;
> + sector_t m;
> + int r = 0;
> + struct completion comp;
> +
> + *copied = 0;
> +
> + m = min(bdev_max_copy_sectors(bdev1), bdev_max_copy_sectors(bdev2));
> + if (!m)
> + return -EOPNOTSUPP;
> + m = min(m, (sector_t)round_down(UINT_MAX, PAGE_SIZE) >> 9);
> +
> + if (unlikely(bdev_read_only(bdev2)))
> + return -EPERM;
> +
> + token = alloc_page(gfp_mask);
> + if (unlikely(!token))
> + return -ENOMEM;
> +
> + while (nr_sects) {
> + struct bio *read_bio, *write_bio;
> + sector_t this_step = min(nr_sects, m);
> +
> + read_bio = bio_alloc(gfp_mask, 1);
> + if (unlikely(!read_bio)) {
> + r = -ENOMEM;
> + break;
> + }
> + bio_set_op_attrs(read_bio, REQ_OP_COPY_READ_TOKEN, REQ_NOMERGE);
> + bio_set_dev(read_bio, bdev1);
> + __bio_add_page(read_bio, token, PAGE_SIZE, 0);
You have this "token" payload as driver specific data, but there's no check that bdev1 and bdev2 subscribe to the same driver specific format.
I thought we discussed defining something like a "copy domain" that establishes which block devices can offload copy operations to/from each other, and that should be checked before proceeding with the copy operation.
^ permalink raw reply [flat|nested] 272+ messages in thread* Re: [dm-devel] [RFC PATCH 1/3] block: add copy offload support
@ 2022-02-02 18:40 ` Knight, Frederick
0 siblings, 0 replies; 272+ messages in thread
From: Knight, Frederick @ 2022-02-02 18:40 UTC (permalink / raw)
To: Keith Busch, Mikulas Patocka
Cc: djwong, linux-nvme, clm, dm-devel, osandov, Javier González,
Assche, linux-scsi, Christoph Hellwig, roland, zach.brown,
Kulkarni, msnitzer@redhat.com >> msnitzer@redhat.com,
josef, linux-block, dsterba, Jens Axboe, tytso, Kanchan Joshi,
martin.petersen@oracle.com >> Martin K. Petersen, jack,
linux-fsdevel, lsf-pc
Just FYI about copy domains.
SCSI already has copy domains defined (it is optional in the standard). Third-party Copy Descriptor - Copy Group Identifier. Here's the SCSI text:
A Copy Group is a set of logical units that have a high probability of using high performance methods (e.g.,
copy on write snapshot) for third-party copy operations involving logical units that are in the same Copy
Group. Each logical unit may be a member of zero or one Copy Group. A logical unit indicates membership in
a Copy Group using the Copy Group Identifier third-party copy descriptor (see 7.7.18.13).
If a third-party copy operation involves logical units that are in different Copy Groups, then that third-party copy
operation has a high probability of using low performance methods (e.g., copy manager read operations from
the source CSCD or copy manager write operations to the destination CSCD).
NVMe today can only copy between LBAs on the SAME Namespace. There is a new project just getting started to allow copy across namespaces in the same NVM subsystem (included as part of that project is to define how the copy domains will work). So for NVMe, copy domains are still a work in progress.
Just FYI.
Fred
-----Original Message-----
From: Keith Busch <kbusch@kernel.org>
Sent: Wednesday, February 2, 2022 11:22 AM
To: Mikulas Patocka <mpatocka@redhat.com>
Cc: Javier González <javier@javigon.com>; Chaitanya Kulkarni <chaitanyak@nvidia.com>; linux-block@vger.kernel.org; linux-scsi@vger.kernel.org; dm-devel@redhat.com; linux-nvme@lists.infradead.org; linux-fsdevel <linux-fsdevel@vger.kernel.org>; Jens Axboe <axboe@kernel.dk>; msnitzer@redhat.com >> msnitzer@redhat.com <msnitzer@redhat.com>; Bart Van Assche <bvanassche@acm.org>; martin.petersen@oracle.com >> Martin K. Petersen <martin.petersen@oracle.com>; roland@purestorage.com; Hannes Reinecke <hare@suse.de>; Christoph Hellwig <hch@lst.de>; Knight, Frederick <Frederick.Knight@netapp.com>; zach.brown@ni.com; osandov@fb.com; lsf-pc@lists.linux-foundation.org; djwong@kernel.org; josef@toxicpanda.com; clm@fb.com; dsterba@suse.com; tytso@mit.edu; jack@suse.com; Kanchan Joshi <joshi.k@samsung.com>
Subject: Re: [RFC PATCH 1/3] block: add copy offload support
NetApp Security WARNING: This is an external email. Do not click links or open attachments unless you recognize the sender and know the content is safe.
On Tue, Feb 01, 2022 at 01:32:29PM -0500, Mikulas Patocka wrote:
> +int blkdev_issue_copy(struct block_device *bdev1, sector_t sector1,
> + struct block_device *bdev2, sector_t sector2,
> + sector_t nr_sects, sector_t *copied, gfp_t
> +gfp_mask) {
> + struct page *token;
> + sector_t m;
> + int r = 0;
> + struct completion comp;
> +
> + *copied = 0;
> +
> + m = min(bdev_max_copy_sectors(bdev1), bdev_max_copy_sectors(bdev2));
> + if (!m)
> + return -EOPNOTSUPP;
> + m = min(m, (sector_t)round_down(UINT_MAX, PAGE_SIZE) >> 9);
> +
> + if (unlikely(bdev_read_only(bdev2)))
> + return -EPERM;
> +
> + token = alloc_page(gfp_mask);
> + if (unlikely(!token))
> + return -ENOMEM;
> +
> + while (nr_sects) {
> + struct bio *read_bio, *write_bio;
> + sector_t this_step = min(nr_sects, m);
> +
> + read_bio = bio_alloc(gfp_mask, 1);
> + if (unlikely(!read_bio)) {
> + r = -ENOMEM;
> + break;
> + }
> + bio_set_op_attrs(read_bio, REQ_OP_COPY_READ_TOKEN, REQ_NOMERGE);
> + bio_set_dev(read_bio, bdev1);
> + __bio_add_page(read_bio, token, PAGE_SIZE, 0);
You have this "token" payload as driver specific data, but there's no check that bdev1 and bdev2 subscribe to the same driver specific format.
I thought we discussed defining something like a "copy domain" that establishes which block devices can offload copy operations to/from each other, and that should be checked before proceeding with the copy operation.
--
dm-devel mailing list
dm-devel@redhat.com
https://listman.redhat.com/mailman/listinfo/dm-devel
^ permalink raw reply [flat|nested] 272+ messages in thread
* [RFC PATCH 2/3] nvme: add copy offload support
2022-02-01 18:31 ` [dm-devel] " Mikulas Patocka
@ 2022-02-01 18:33 ` Mikulas Patocka
-1 siblings, 0 replies; 272+ messages in thread
From: Mikulas Patocka @ 2022-02-01 18:33 UTC (permalink / raw)
To: Javier González
Cc: Chaitanya Kulkarni, linux-block, linux-scsi, dm-devel,
linux-nvme, linux-fsdevel, Jens Axboe,
msnitzer@redhat.com >> msnitzer@redhat.com,
Bart Van Assche,
martin.petersen@oracle.com >> Martin K. Petersen, roland,
Hannes Reinecke, kbus @imap.gmail.com>> Keith Busch,
Christoph Hellwig, Frederick.Knight, zach.brown, osandov, lsf-pc,
djwong, josef, clm, dsterba, tytso, jack, Kanchan Joshi
This patch adds copy offload support to the nvme host driver.
The function nvme_setup_read_token stores namespace and location in the
token and the function nvme_setup_write_token retrieves information from
the token and submits the copy command to the device.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
---
drivers/nvme/host/core.c | 94 +++++++++++++++++++++++++++++++++++++++++++++
drivers/nvme/host/fc.c | 5 ++
drivers/nvme/host/nvme.h | 1
drivers/nvme/host/pci.c | 5 ++
drivers/nvme/host/rdma.c | 5 ++
drivers/nvme/host/tcp.c | 5 ++
drivers/nvme/target/loop.c | 5 ++
include/linux/nvme.h | 33 +++++++++++++++
8 files changed, 153 insertions(+)
Index: linux-2.6/drivers/nvme/host/core.c
===================================================================
--- linux-2.6.orig/drivers/nvme/host/core.c 2022-02-01 18:34:19.000000000 +0100
+++ linux-2.6/drivers/nvme/host/core.c 2022-02-01 18:34:19.000000000 +0100
@@ -975,6 +975,85 @@ static inline blk_status_t nvme_setup_rw
return 0;
}
+struct nvme_copy_token {
+ char subsys[4];
+ struct nvme_ns *ns;
+ u64 src_sector;
+ u64 sectors;
+};
+
+static inline blk_status_t nvme_setup_read_token(struct nvme_ns *ns, struct request *req)
+{
+ struct bio *bio = req->bio;
+ struct nvme_copy_token *token = page_to_virt(bio->bi_io_vec[0].bv_page) + bio->bi_io_vec[0].bv_offset;
+ memcpy(token->subsys, "nvme", 4);
+ token->ns = ns;
+ token->src_sector = bio->bi_iter.bi_sector;
+ token->sectors = bio->bi_iter.bi_size >> 9;
+ return 0;
+}
+
+static inline blk_status_t nvme_setup_write_token(struct nvme_ns *ns,
+ struct request *req, struct nvme_command *cmnd)
+{
+ sector_t src_sector, dst_sector, n_sectors;
+ u64 src_lba, dst_lba, n_lba;
+
+ unsigned n_descriptors, i;
+ struct nvme_copy_desc *descriptors;
+
+ struct bio *bio = req->bio;
+ struct nvme_copy_token *token = page_to_virt(bio->bi_io_vec[0].bv_page) + bio->bi_io_vec[0].bv_offset;
+ if (unlikely(memcmp(token->subsys, "nvme", 4)))
+ return BLK_STS_NOTSUPP;
+ if (unlikely(token->ns != ns))
+ return BLK_STS_NOTSUPP;
+
+ src_sector = token->src_sector;
+ dst_sector = bio->bi_iter.bi_sector;
+ n_sectors = token->sectors;
+ if (WARN_ON(n_sectors != bio->bi_iter.bi_size >> 9))
+ return BLK_STS_NOTSUPP;
+
+ src_lba = nvme_sect_to_lba(ns, src_sector);
+ dst_lba = nvme_sect_to_lba(ns, dst_sector);
+ n_lba = nvme_sect_to_lba(ns, n_sectors);
+
+ if (unlikely(nvme_lba_to_sect(ns, src_lba) != src_sector) ||
+ unlikely(nvme_lba_to_sect(ns, dst_lba) != dst_sector) ||
+ unlikely(nvme_lba_to_sect(ns, n_lba) != n_sectors))
+ return BLK_STS_NOTSUPP;
+
+ if (WARN_ON(!n_lba))
+ return BLK_STS_NOTSUPP;
+
+ n_descriptors = (n_lba + 0xffff) / 0x10000;
+ descriptors = kzalloc(n_descriptors * sizeof(struct nvme_copy_desc), GFP_ATOMIC | __GFP_NOWARN);
+ if (unlikely(!descriptors))
+ return BLK_STS_RESOURCE;
+
+ memset(cmnd, 0, sizeof(*cmnd));
+ cmnd->copy.opcode = nvme_cmd_copy;
+ cmnd->copy.nsid = cpu_to_le32(ns->head->ns_id);
+ cmnd->copy.sdlba = cpu_to_le64(dst_lba);
+ cmnd->copy.length = n_descriptors - 1;
+
+ for (i = 0; i < n_descriptors; i++) {
+ u64 this_step = min(n_lba, (u64)0x10000);
+ descriptors[i].slba = cpu_to_le64(src_lba);
+ descriptors[i].length = cpu_to_le16(this_step - 1);
+ src_lba += this_step;
+ n_lba -= this_step;
+ }
+
+ req->special_vec.bv_page = virt_to_page(descriptors);
+ req->special_vec.bv_offset = offset_in_page(descriptors);
+ req->special_vec.bv_len = n_descriptors * sizeof(struct nvme_copy_desc);
+ req->rq_flags |= RQF_SPECIAL_PAYLOAD;
+
+ return 0;
+}
+
void nvme_cleanup_cmd(struct request *req)
{
if (req->rq_flags & RQF_SPECIAL_PAYLOAD) {
@@ -1032,6 +1111,12 @@ blk_status_t nvme_setup_cmd(struct nvme_
case REQ_OP_ZONE_APPEND:
ret = nvme_setup_rw(ns, req, cmd, nvme_cmd_zone_append);
break;
+ case REQ_OP_COPY_READ_TOKEN:
+ ret = nvme_setup_read_token(ns, req);
+ break;
+ case REQ_OP_COPY_WRITE_TOKEN:
+ ret = nvme_setup_write_token(ns, req, cmd);
+ break;
default:
WARN_ON_ONCE(1);
return BLK_STS_IOERR;
@@ -1865,6 +1950,8 @@ static void nvme_update_disk_info(struct
blk_queue_max_write_zeroes_sectors(disk->queue,
ns->ctrl->max_zeroes_sectors);
+ blk_queue_max_copy_sectors(disk->queue, ns->ctrl->max_copy_sectors);
+
set_disk_ro(disk, (id->nsattr & NVME_NS_ATTR_RO) ||
test_bit(NVME_NS_FORCE_RO, &ns->flags));
}
@@ -2891,6 +2978,12 @@ static int nvme_init_non_mdts_limits(str
else
ctrl->max_zeroes_sectors = 0;
+ if (ctrl->oncs & NVME_CTRL_ONCS_COPY) {
+ ctrl->max_copy_sectors = 1U << 24;
+ } else {
+ ctrl->max_copy_sectors = 0;
+ }
+
if (nvme_ctrl_limited_cns(ctrl))
return 0;
@@ -4716,6 +4809,7 @@ static inline void _nvme_check_size(void
{
BUILD_BUG_ON(sizeof(struct nvme_common_command) != 64);
BUILD_BUG_ON(sizeof(struct nvme_rw_command) != 64);
+ BUILD_BUG_ON(sizeof(struct nvme_copy_command) != 64);
BUILD_BUG_ON(sizeof(struct nvme_identify) != 64);
BUILD_BUG_ON(sizeof(struct nvme_features) != 64);
BUILD_BUG_ON(sizeof(struct nvme_download_firmware) != 64);
Index: linux-2.6/drivers/nvme/host/nvme.h
===================================================================
--- linux-2.6.orig/drivers/nvme/host/nvme.h 2022-02-01 18:34:19.000000000 +0100
+++ linux-2.6/drivers/nvme/host/nvme.h 2022-02-01 18:34:19.000000000 +0100
@@ -277,6 +277,7 @@ struct nvme_ctrl {
#ifdef CONFIG_BLK_DEV_ZONED
u32 max_zone_append;
#endif
+ u32 max_copy_sectors;
u16 crdt[3];
u16 oncs;
u16 oacs;
Index: linux-2.6/include/linux/nvme.h
===================================================================
--- linux-2.6.orig/include/linux/nvme.h 2022-02-01 18:34:19.000000000 +0100
+++ linux-2.6/include/linux/nvme.h 2022-02-01 18:34:19.000000000 +0100
@@ -335,6 +335,8 @@ enum {
NVME_CTRL_ONCS_WRITE_ZEROES = 1 << 3,
NVME_CTRL_ONCS_RESERVATIONS = 1 << 5,
NVME_CTRL_ONCS_TIMESTAMP = 1 << 6,
+ NVME_CTRL_ONCS_VERIFY = 1 << 7,
+ NVME_CTRL_ONCS_COPY = 1 << 8,
NVME_CTRL_VWC_PRESENT = 1 << 0,
NVME_CTRL_OACS_SEC_SUPP = 1 << 0,
NVME_CTRL_OACS_DIRECTIVES = 1 << 5,
@@ -704,6 +706,7 @@ enum nvme_opcode {
nvme_cmd_resv_report = 0x0e,
nvme_cmd_resv_acquire = 0x11,
nvme_cmd_resv_release = 0x15,
+ nvme_cmd_copy = 0x19,
nvme_cmd_zone_mgmt_send = 0x79,
nvme_cmd_zone_mgmt_recv = 0x7a,
nvme_cmd_zone_append = 0x7d,
@@ -872,6 +875,35 @@ enum {
NVME_RW_DTYPE_STREAMS = 1 << 4,
};
+struct nvme_copy_command {
+ __u8 opcode;
+ __u8 flags;
+ __u16 command_id;
+ __le32 nsid;
+ __u64 rsvd2;
+ __le64 metadata;
+ union nvme_data_ptr dptr;
+ __le64 sdlba;
+ __u8 length;
+ __u8 control2;
+ __le16 control;
+ __le32 dspec;
+ __le32 reftag;
+ __le16 apptag;
+ __le16 appmask;
+};
+
+struct nvme_copy_desc {
+ __u64 rsvd;
+ __le64 slba;
+ __le16 length;
+ __u16 rsvd2;
+ __u32 rsvd3;
+ __le32 reftag;
+ __le16 apptag;
+ __le16 appmask;
+};
+
struct nvme_dsm_cmd {
__u8 opcode;
__u8 flags;
@@ -1441,6 +1473,7 @@ struct nvme_command {
union {
struct nvme_common_command common;
struct nvme_rw_command rw;
+ struct nvme_copy_command copy;
struct nvme_identify identify;
struct nvme_features features;
struct nvme_create_cq create_cq;
Index: linux-2.6/drivers/nvme/host/pci.c
===================================================================
--- linux-2.6.orig/drivers/nvme/host/pci.c 2022-02-01 18:34:19.000000000 +0100
+++ linux-2.6/drivers/nvme/host/pci.c 2022-02-01 18:34:19.000000000 +0100
@@ -949,6 +949,11 @@ static blk_status_t nvme_queue_rq(struct
struct nvme_iod *iod = blk_mq_rq_to_pdu(req);
blk_status_t ret;
+ if (unlikely((req->cmd_flags & REQ_OP_MASK) == REQ_OP_COPY_READ_TOKEN)) {
+ blk_mq_end_request(req, BLK_STS_OK);
+ return BLK_STS_OK;
+ }
+
/*
* We should not need to do this, but we're still using this to
* ensure we can drain requests on a dying queue.
Index: linux-2.6/drivers/nvme/host/fc.c
===================================================================
--- linux-2.6.orig/drivers/nvme/host/fc.c 2022-02-01 18:34:19.000000000 +0100
+++ linux-2.6/drivers/nvme/host/fc.c 2022-02-01 18:34:19.000000000 +0100
@@ -2780,6 +2780,11 @@ nvme_fc_queue_rq(struct blk_mq_hw_ctx *h
u32 data_len;
blk_status_t ret;
+ if (unlikely((rq->cmd_flags & REQ_OP_MASK) == REQ_OP_COPY_READ_TOKEN)) {
+ blk_mq_end_request(rq, BLK_STS_OK);
+ return BLK_STS_OK;
+ }
+
if (ctrl->rport->remoteport.port_state != FC_OBJSTATE_ONLINE ||
!nvme_check_ready(&queue->ctrl->ctrl, rq, queue_ready))
return nvme_fail_nonready_command(&queue->ctrl->ctrl, rq);
Index: linux-2.6/drivers/nvme/host/rdma.c
===================================================================
--- linux-2.6.orig/drivers/nvme/host/rdma.c 2022-02-01 18:34:19.000000000 +0100
+++ linux-2.6/drivers/nvme/host/rdma.c 2022-02-01 18:34:19.000000000 +0100
@@ -2048,6 +2048,11 @@ static blk_status_t nvme_rdma_queue_rq(s
blk_status_t ret;
int err;
+ if (unlikely((rq->cmd_flags & REQ_OP_MASK) == REQ_OP_COPY_READ_TOKEN)) {
+ blk_mq_end_request(rq, BLK_STS_OK);
+ return BLK_STS_OK;
+ }
+
WARN_ON_ONCE(rq->tag < 0);
if (!nvme_check_ready(&queue->ctrl->ctrl, rq, queue_ready))
Index: linux-2.6/drivers/nvme/host/tcp.c
===================================================================
--- linux-2.6.orig/drivers/nvme/host/tcp.c 2022-02-01 18:34:19.000000000 +0100
+++ linux-2.6/drivers/nvme/host/tcp.c 2022-02-01 18:34:19.000000000 +0100
@@ -2372,6 +2372,11 @@ static blk_status_t nvme_tcp_queue_rq(st
bool queue_ready = test_bit(NVME_TCP_Q_LIVE, &queue->flags);
blk_status_t ret;
+ if (unlikely((rq->cmd_flags & REQ_OP_MASK) == REQ_OP_COPY_READ_TOKEN)) {
+ blk_mq_end_request(rq, BLK_STS_OK);
+ return BLK_STS_OK;
+ }
+
if (!nvme_check_ready(&queue->ctrl->ctrl, rq, queue_ready))
return nvme_fail_nonready_command(&queue->ctrl->ctrl, rq);
Index: linux-2.6/drivers/nvme/target/loop.c
===================================================================
--- linux-2.6.orig/drivers/nvme/target/loop.c 2022-02-01 18:34:19.000000000 +0100
+++ linux-2.6/drivers/nvme/target/loop.c 2022-02-01 18:34:19.000000000 +0100
@@ -138,6 +138,11 @@ static blk_status_t nvme_loop_queue_rq(s
bool queue_ready = test_bit(NVME_LOOP_Q_LIVE, &queue->flags);
blk_status_t ret;
+ if (unlikely((req->cmd_flags & REQ_OP_MASK) == REQ_OP_COPY_READ_TOKEN)) {
+ blk_mq_end_request(req, BLK_STS_OK);
+ return BLK_STS_OK;
+ }
+
if (!nvme_check_ready(&queue->ctrl->ctrl, req, queue_ready))
return nvme_fail_nonready_command(&queue->ctrl->ctrl, req);
^ permalink raw reply [flat|nested] 272+ messages in thread* [dm-devel] [RFC PATCH 2/3] nvme: add copy offload support
@ 2022-02-01 18:33 ` Mikulas Patocka
0 siblings, 0 replies; 272+ messages in thread
From: Mikulas Patocka @ 2022-02-01 18:33 UTC (permalink / raw)
To: Javier González
Cc: djwong, linux-nvme, clm, dm-devel, osandov,
msnitzer@redhat.com >> msnitzer@redhat.com,
Bart Van Assche, linux-scsi, Christoph Hellwig, roland,
zach.brown, Chaitanya Kulkarni, josef, linux-block, dsterba,
kbus @imap.gmail.com>> Keith Busch, Frederick.Knight,
Jens Axboe, tytso, Kanchan Joshi,
martin.petersen@oracle.com >> Martin K. Petersen, jack,
linux-fsdevel, lsf-pc
This patch adds copy offload support to the nvme host driver.
The function nvme_setup_read_token stores namespace and location in the
token and the function nvme_setup_write_token retrieves information from
the token and submits the copy command to the device.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
---
drivers/nvme/host/core.c | 94 +++++++++++++++++++++++++++++++++++++++++++++
drivers/nvme/host/fc.c | 5 ++
drivers/nvme/host/nvme.h | 1
drivers/nvme/host/pci.c | 5 ++
drivers/nvme/host/rdma.c | 5 ++
drivers/nvme/host/tcp.c | 5 ++
drivers/nvme/target/loop.c | 5 ++
include/linux/nvme.h | 33 +++++++++++++++
8 files changed, 153 insertions(+)
Index: linux-2.6/drivers/nvme/host/core.c
===================================================================
--- linux-2.6.orig/drivers/nvme/host/core.c 2022-02-01 18:34:19.000000000 +0100
+++ linux-2.6/drivers/nvme/host/core.c 2022-02-01 18:34:19.000000000 +0100
@@ -975,6 +975,85 @@ static inline blk_status_t nvme_setup_rw
return 0;
}
+struct nvme_copy_token {
+ char subsys[4];
+ struct nvme_ns *ns;
+ u64 src_sector;
+ u64 sectors;
+};
+
+static inline blk_status_t nvme_setup_read_token(struct nvme_ns *ns, struct request *req)
+{
+ struct bio *bio = req->bio;
+ struct nvme_copy_token *token = page_to_virt(bio->bi_io_vec[0].bv_page) + bio->bi_io_vec[0].bv_offset;
+ memcpy(token->subsys, "nvme", 4);
+ token->ns = ns;
+ token->src_sector = bio->bi_iter.bi_sector;
+ token->sectors = bio->bi_iter.bi_size >> 9;
+ return 0;
+}
+
+static inline blk_status_t nvme_setup_write_token(struct nvme_ns *ns,
+ struct request *req, struct nvme_command *cmnd)
+{
+ sector_t src_sector, dst_sector, n_sectors;
+ u64 src_lba, dst_lba, n_lba;
+
+ unsigned n_descriptors, i;
+ struct nvme_copy_desc *descriptors;
+
+ struct bio *bio = req->bio;
+ struct nvme_copy_token *token = page_to_virt(bio->bi_io_vec[0].bv_page) + bio->bi_io_vec[0].bv_offset;
+ if (unlikely(memcmp(token->subsys, "nvme", 4)))
+ return BLK_STS_NOTSUPP;
+ if (unlikely(token->ns != ns))
+ return BLK_STS_NOTSUPP;
+
+ src_sector = token->src_sector;
+ dst_sector = bio->bi_iter.bi_sector;
+ n_sectors = token->sectors;
+ if (WARN_ON(n_sectors != bio->bi_iter.bi_size >> 9))
+ return BLK_STS_NOTSUPP;
+
+ src_lba = nvme_sect_to_lba(ns, src_sector);
+ dst_lba = nvme_sect_to_lba(ns, dst_sector);
+ n_lba = nvme_sect_to_lba(ns, n_sectors);
+
+ if (unlikely(nvme_lba_to_sect(ns, src_lba) != src_sector) ||
+ unlikely(nvme_lba_to_sect(ns, dst_lba) != dst_sector) ||
+ unlikely(nvme_lba_to_sect(ns, n_lba) != n_sectors))
+ return BLK_STS_NOTSUPP;
+
+ if (WARN_ON(!n_lba))
+ return BLK_STS_NOTSUPP;
+
+ n_descriptors = (n_lba + 0xffff) / 0x10000;
+ descriptors = kzalloc(n_descriptors * sizeof(struct nvme_copy_desc), GFP_ATOMIC | __GFP_NOWARN);
+ if (unlikely(!descriptors))
+ return BLK_STS_RESOURCE;
+
+ memset(cmnd, 0, sizeof(*cmnd));
+ cmnd->copy.opcode = nvme_cmd_copy;
+ cmnd->copy.nsid = cpu_to_le32(ns->head->ns_id);
+ cmnd->copy.sdlba = cpu_to_le64(dst_lba);
+ cmnd->copy.length = n_descriptors - 1;
+
+ for (i = 0; i < n_descriptors; i++) {
+ u64 this_step = min(n_lba, (u64)0x10000);
+ descriptors[i].slba = cpu_to_le64(src_lba);
+ descriptors[i].length = cpu_to_le16(this_step - 1);
+ src_lba += this_step;
+ n_lba -= this_step;
+ }
+
+ req->special_vec.bv_page = virt_to_page(descriptors);
+ req->special_vec.bv_offset = offset_in_page(descriptors);
+ req->special_vec.bv_len = n_descriptors * sizeof(struct nvme_copy_desc);
+ req->rq_flags |= RQF_SPECIAL_PAYLOAD;
+
+ return 0;
+}
+
void nvme_cleanup_cmd(struct request *req)
{
if (req->rq_flags & RQF_SPECIAL_PAYLOAD) {
@@ -1032,6 +1111,12 @@ blk_status_t nvme_setup_cmd(struct nvme_
case REQ_OP_ZONE_APPEND:
ret = nvme_setup_rw(ns, req, cmd, nvme_cmd_zone_append);
break;
+ case REQ_OP_COPY_READ_TOKEN:
+ ret = nvme_setup_read_token(ns, req);
+ break;
+ case REQ_OP_COPY_WRITE_TOKEN:
+ ret = nvme_setup_write_token(ns, req, cmd);
+ break;
default:
WARN_ON_ONCE(1);
return BLK_STS_IOERR;
@@ -1865,6 +1950,8 @@ static void nvme_update_disk_info(struct
blk_queue_max_write_zeroes_sectors(disk->queue,
ns->ctrl->max_zeroes_sectors);
+ blk_queue_max_copy_sectors(disk->queue, ns->ctrl->max_copy_sectors);
+
set_disk_ro(disk, (id->nsattr & NVME_NS_ATTR_RO) ||
test_bit(NVME_NS_FORCE_RO, &ns->flags));
}
@@ -2891,6 +2978,12 @@ static int nvme_init_non_mdts_limits(str
else
ctrl->max_zeroes_sectors = 0;
+ if (ctrl->oncs & NVME_CTRL_ONCS_COPY) {
+ ctrl->max_copy_sectors = 1U << 24;
+ } else {
+ ctrl->max_copy_sectors = 0;
+ }
+
if (nvme_ctrl_limited_cns(ctrl))
return 0;
@@ -4716,6 +4809,7 @@ static inline void _nvme_check_size(void
{
BUILD_BUG_ON(sizeof(struct nvme_common_command) != 64);
BUILD_BUG_ON(sizeof(struct nvme_rw_command) != 64);
+ BUILD_BUG_ON(sizeof(struct nvme_copy_command) != 64);
BUILD_BUG_ON(sizeof(struct nvme_identify) != 64);
BUILD_BUG_ON(sizeof(struct nvme_features) != 64);
BUILD_BUG_ON(sizeof(struct nvme_download_firmware) != 64);
Index: linux-2.6/drivers/nvme/host/nvme.h
===================================================================
--- linux-2.6.orig/drivers/nvme/host/nvme.h 2022-02-01 18:34:19.000000000 +0100
+++ linux-2.6/drivers/nvme/host/nvme.h 2022-02-01 18:34:19.000000000 +0100
@@ -277,6 +277,7 @@ struct nvme_ctrl {
#ifdef CONFIG_BLK_DEV_ZONED
u32 max_zone_append;
#endif
+ u32 max_copy_sectors;
u16 crdt[3];
u16 oncs;
u16 oacs;
Index: linux-2.6/include/linux/nvme.h
===================================================================
--- linux-2.6.orig/include/linux/nvme.h 2022-02-01 18:34:19.000000000 +0100
+++ linux-2.6/include/linux/nvme.h 2022-02-01 18:34:19.000000000 +0100
@@ -335,6 +335,8 @@ enum {
NVME_CTRL_ONCS_WRITE_ZEROES = 1 << 3,
NVME_CTRL_ONCS_RESERVATIONS = 1 << 5,
NVME_CTRL_ONCS_TIMESTAMP = 1 << 6,
+ NVME_CTRL_ONCS_VERIFY = 1 << 7,
+ NVME_CTRL_ONCS_COPY = 1 << 8,
NVME_CTRL_VWC_PRESENT = 1 << 0,
NVME_CTRL_OACS_SEC_SUPP = 1 << 0,
NVME_CTRL_OACS_DIRECTIVES = 1 << 5,
@@ -704,6 +706,7 @@ enum nvme_opcode {
nvme_cmd_resv_report = 0x0e,
nvme_cmd_resv_acquire = 0x11,
nvme_cmd_resv_release = 0x15,
+ nvme_cmd_copy = 0x19,
nvme_cmd_zone_mgmt_send = 0x79,
nvme_cmd_zone_mgmt_recv = 0x7a,
nvme_cmd_zone_append = 0x7d,
@@ -872,6 +875,35 @@ enum {
NVME_RW_DTYPE_STREAMS = 1 << 4,
};
+struct nvme_copy_command {
+ __u8 opcode;
+ __u8 flags;
+ __u16 command_id;
+ __le32 nsid;
+ __u64 rsvd2;
+ __le64 metadata;
+ union nvme_data_ptr dptr;
+ __le64 sdlba;
+ __u8 length;
+ __u8 control2;
+ __le16 control;
+ __le32 dspec;
+ __le32 reftag;
+ __le16 apptag;
+ __le16 appmask;
+};
+
+struct nvme_copy_desc {
+ __u64 rsvd;
+ __le64 slba;
+ __le16 length;
+ __u16 rsvd2;
+ __u32 rsvd3;
+ __le32 reftag;
+ __le16 apptag;
+ __le16 appmask;
+};
+
struct nvme_dsm_cmd {
__u8 opcode;
__u8 flags;
@@ -1441,6 +1473,7 @@ struct nvme_command {
union {
struct nvme_common_command common;
struct nvme_rw_command rw;
+ struct nvme_copy_command copy;
struct nvme_identify identify;
struct nvme_features features;
struct nvme_create_cq create_cq;
Index: linux-2.6/drivers/nvme/host/pci.c
===================================================================
--- linux-2.6.orig/drivers/nvme/host/pci.c 2022-02-01 18:34:19.000000000 +0100
+++ linux-2.6/drivers/nvme/host/pci.c 2022-02-01 18:34:19.000000000 +0100
@@ -949,6 +949,11 @@ static blk_status_t nvme_queue_rq(struct
struct nvme_iod *iod = blk_mq_rq_to_pdu(req);
blk_status_t ret;
+ if (unlikely((req->cmd_flags & REQ_OP_MASK) == REQ_OP_COPY_READ_TOKEN)) {
+ blk_mq_end_request(req, BLK_STS_OK);
+ return BLK_STS_OK;
+ }
+
/*
* We should not need to do this, but we're still using this to
* ensure we can drain requests on a dying queue.
Index: linux-2.6/drivers/nvme/host/fc.c
===================================================================
--- linux-2.6.orig/drivers/nvme/host/fc.c 2022-02-01 18:34:19.000000000 +0100
+++ linux-2.6/drivers/nvme/host/fc.c 2022-02-01 18:34:19.000000000 +0100
@@ -2780,6 +2780,11 @@ nvme_fc_queue_rq(struct blk_mq_hw_ctx *h
u32 data_len;
blk_status_t ret;
+ if (unlikely((rq->cmd_flags & REQ_OP_MASK) == REQ_OP_COPY_READ_TOKEN)) {
+ blk_mq_end_request(rq, BLK_STS_OK);
+ return BLK_STS_OK;
+ }
+
if (ctrl->rport->remoteport.port_state != FC_OBJSTATE_ONLINE ||
!nvme_check_ready(&queue->ctrl->ctrl, rq, queue_ready))
return nvme_fail_nonready_command(&queue->ctrl->ctrl, rq);
Index: linux-2.6/drivers/nvme/host/rdma.c
===================================================================
--- linux-2.6.orig/drivers/nvme/host/rdma.c 2022-02-01 18:34:19.000000000 +0100
+++ linux-2.6/drivers/nvme/host/rdma.c 2022-02-01 18:34:19.000000000 +0100
@@ -2048,6 +2048,11 @@ static blk_status_t nvme_rdma_queue_rq(s
blk_status_t ret;
int err;
+ if (unlikely((rq->cmd_flags & REQ_OP_MASK) == REQ_OP_COPY_READ_TOKEN)) {
+ blk_mq_end_request(rq, BLK_STS_OK);
+ return BLK_STS_OK;
+ }
+
WARN_ON_ONCE(rq->tag < 0);
if (!nvme_check_ready(&queue->ctrl->ctrl, rq, queue_ready))
Index: linux-2.6/drivers/nvme/host/tcp.c
===================================================================
--- linux-2.6.orig/drivers/nvme/host/tcp.c 2022-02-01 18:34:19.000000000 +0100
+++ linux-2.6/drivers/nvme/host/tcp.c 2022-02-01 18:34:19.000000000 +0100
@@ -2372,6 +2372,11 @@ static blk_status_t nvme_tcp_queue_rq(st
bool queue_ready = test_bit(NVME_TCP_Q_LIVE, &queue->flags);
blk_status_t ret;
+ if (unlikely((rq->cmd_flags & REQ_OP_MASK) == REQ_OP_COPY_READ_TOKEN)) {
+ blk_mq_end_request(rq, BLK_STS_OK);
+ return BLK_STS_OK;
+ }
+
if (!nvme_check_ready(&queue->ctrl->ctrl, rq, queue_ready))
return nvme_fail_nonready_command(&queue->ctrl->ctrl, rq);
Index: linux-2.6/drivers/nvme/target/loop.c
===================================================================
--- linux-2.6.orig/drivers/nvme/target/loop.c 2022-02-01 18:34:19.000000000 +0100
+++ linux-2.6/drivers/nvme/target/loop.c 2022-02-01 18:34:19.000000000 +0100
@@ -138,6 +138,11 @@ static blk_status_t nvme_loop_queue_rq(s
bool queue_ready = test_bit(NVME_LOOP_Q_LIVE, &queue->flags);
blk_status_t ret;
+ if (unlikely((req->cmd_flags & REQ_OP_MASK) == REQ_OP_COPY_READ_TOKEN)) {
+ blk_mq_end_request(req, BLK_STS_OK);
+ return BLK_STS_OK;
+ }
+
if (!nvme_check_ready(&queue->ctrl->ctrl, req, queue_ready))
return nvme_fail_nonready_command(&queue->ctrl->ctrl, req);
--
dm-devel mailing list
dm-devel@redhat.com
https://listman.redhat.com/mailman/listinfo/dm-devel
^ permalink raw reply [flat|nested] 272+ messages in thread* Re: [RFC PATCH 2/3] nvme: add copy offload support
2022-02-01 18:33 ` [dm-devel] " Mikulas Patocka
@ 2022-02-01 19:18 ` Bart Van Assche
-1 siblings, 0 replies; 272+ messages in thread
From: Bart Van Assche @ 2022-02-01 19:18 UTC (permalink / raw)
To: Mikulas Patocka
Cc: Chaitanya Kulkarni, linux-block, linux-scsi, dm-devel,
linux-nvme, linux-fsdevel
On 2/1/22 10:33, Mikulas Patocka wrote:
> +static inline blk_status_t nvme_setup_read_token(struct nvme_ns *ns, struct request *req)
> +{
> + struct bio *bio = req->bio;
> + struct nvme_copy_token *token = page_to_virt(bio->bi_io_vec[0].bv_page) + bio->bi_io_vec[0].bv_offset;
Hmm ... shouldn't this function use bvec_kmap_local() instead of
page_to_virt()?
Thanks,
Bart.
^ permalink raw reply [flat|nested] 272+ messages in thread* Re: [dm-devel] [RFC PATCH 2/3] nvme: add copy offload support
@ 2022-02-01 19:18 ` Bart Van Assche
0 siblings, 0 replies; 272+ messages in thread
From: Bart Van Assche @ 2022-02-01 19:18 UTC (permalink / raw)
To: Mikulas Patocka
Cc: Chaitanya Kulkarni, linux-scsi, linux-nvme, linux-block,
dm-devel, linux-fsdevel
On 2/1/22 10:33, Mikulas Patocka wrote:
> +static inline blk_status_t nvme_setup_read_token(struct nvme_ns *ns, struct request *req)
> +{
> + struct bio *bio = req->bio;
> + struct nvme_copy_token *token = page_to_virt(bio->bi_io_vec[0].bv_page) + bio->bi_io_vec[0].bv_offset;
Hmm ... shouldn't this function use bvec_kmap_local() instead of
page_to_virt()?
Thanks,
Bart.
--
dm-devel mailing list
dm-devel@redhat.com
https://listman.redhat.com/mailman/listinfo/dm-devel
^ permalink raw reply [flat|nested] 272+ messages in thread* Re: [RFC PATCH 2/3] nvme: add copy offload support
2022-02-01 19:18 ` [dm-devel] " Bart Van Assche
@ 2022-02-01 19:25 ` Mikulas Patocka
-1 siblings, 0 replies; 272+ messages in thread
From: Mikulas Patocka @ 2022-02-01 19:25 UTC (permalink / raw)
To: Bart Van Assche
Cc: Chaitanya Kulkarni, linux-block, linux-scsi, dm-devel,
linux-nvme, linux-fsdevel
On Tue, 1 Feb 2022, Bart Van Assche wrote:
> On 2/1/22 10:33, Mikulas Patocka wrote:
> > +static inline blk_status_t nvme_setup_read_token(struct nvme_ns *ns, struct
> > request *req)
> > +{
> > + struct bio *bio = req->bio;
> > + struct nvme_copy_token *token =
> > page_to_virt(bio->bi_io_vec[0].bv_page) + bio->bi_io_vec[0].bv_offset;
>
> Hmm ... shouldn't this function use bvec_kmap_local() instead of
> page_to_virt()?
>
> Thanks,
>
> Bart.
.bv_page is allocated only in blkdev_issue_copy with alloc_page. So,
page_to_virt works.
But you are right that bvec_kmap_local may be nicer.
Mikulas
^ permalink raw reply [flat|nested] 272+ messages in thread* Re: [dm-devel] [RFC PATCH 2/3] nvme: add copy offload support
@ 2022-02-01 19:25 ` Mikulas Patocka
0 siblings, 0 replies; 272+ messages in thread
From: Mikulas Patocka @ 2022-02-01 19:25 UTC (permalink / raw)
To: Bart Van Assche
Cc: Chaitanya Kulkarni, linux-scsi, linux-nvme, linux-block,
dm-devel, linux-fsdevel
On Tue, 1 Feb 2022, Bart Van Assche wrote:
> On 2/1/22 10:33, Mikulas Patocka wrote:
> > +static inline blk_status_t nvme_setup_read_token(struct nvme_ns *ns, struct
> > request *req)
> > +{
> > + struct bio *bio = req->bio;
> > + struct nvme_copy_token *token =
> > page_to_virt(bio->bi_io_vec[0].bv_page) + bio->bi_io_vec[0].bv_offset;
>
> Hmm ... shouldn't this function use bvec_kmap_local() instead of
> page_to_virt()?
>
> Thanks,
>
> Bart.
.bv_page is allocated only in blkdev_issue_copy with alloc_page. So,
page_to_virt works.
But you are right that bvec_kmap_local may be nicer.
Mikulas
--
dm-devel mailing list
dm-devel@redhat.com
https://listman.redhat.com/mailman/listinfo/dm-devel
^ permalink raw reply [flat|nested] 272+ messages in thread
* [RFC PATCH 3/3] nvme: add the "debug" host driver
2022-02-01 18:31 ` [dm-devel] " Mikulas Patocka
@ 2022-02-01 18:33 ` Mikulas Patocka
-1 siblings, 0 replies; 272+ messages in thread
From: Mikulas Patocka @ 2022-02-01 18:33 UTC (permalink / raw)
To: Javier González
Cc: Chaitanya Kulkarni, linux-block, linux-scsi, dm-devel,
linux-nvme, linux-fsdevel, Jens Axboe,
msnitzer@redhat.com >> msnitzer@redhat.com,
Bart Van Assche,
martin.petersen@oracle.com >> Martin K. Petersen, roland,
Hannes Reinecke, kbus @imap.gmail.com>> Keith Busch,
Christoph Hellwig, Frederick.Knight, zach.brown, osandov, lsf-pc,
djwong, josef, clm, dsterba, tytso, jack, Kanchan Joshi
This patch adds a new driver "nvme-debug". It uses memory as a backing
store and it is used to test the copy offload functionality.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
---
drivers/nvme/host/Kconfig | 13
drivers/nvme/host/Makefile | 1
drivers/nvme/host/nvme-debug.c | 838 +++++++++++++++++++++++++++++++++++++++++
3 files changed, 852 insertions(+)
Index: linux-2.6/drivers/nvme/host/Kconfig
===================================================================
--- linux-2.6.orig/drivers/nvme/host/Kconfig 2022-02-01 18:34:22.000000000 +0100
+++ linux-2.6/drivers/nvme/host/Kconfig 2022-02-01 18:34:22.000000000 +0100
@@ -83,3 +83,16 @@ config NVME_TCP
from https://github.com/linux-nvme/nvme-cli.
If unsure, say N.
+
+config NVME_DEBUG
+ tristate "NVM Express debug"
+ depends on INET
+ depends on BLOCK
+ select NVME_CORE
+ select NVME_FABRICS
+ select CRYPTO
+ select CRYPTO_CRC32C
+ help
+ This pseudo driver simulates a NVMe adapter.
+
+ If unsure, say N.
Index: linux-2.6/drivers/nvme/host/Makefile
===================================================================
--- linux-2.6.orig/drivers/nvme/host/Makefile 2022-02-01 18:34:22.000000000 +0100
+++ linux-2.6/drivers/nvme/host/Makefile 2022-02-01 18:34:22.000000000 +0100
@@ -8,6 +8,7 @@ obj-$(CONFIG_NVME_FABRICS) += nvme-fabr
obj-$(CONFIG_NVME_RDMA) += nvme-rdma.o
obj-$(CONFIG_NVME_FC) += nvme-fc.o
obj-$(CONFIG_NVME_TCP) += nvme-tcp.o
+obj-$(CONFIG_NVME_DEBUG) += nvme-debug.o
nvme-core-y := core.o ioctl.o
nvme-core-$(CONFIG_TRACING) += trace.o
Index: linux-2.6/drivers/nvme/host/nvme-debug.c
===================================================================
--- /dev/null 1970-01-01 00:00:00.000000000 +0000
+++ linux-2.6/drivers/nvme/host/nvme-debug.c 2022-02-01 18:34:22.000000000 +0100
@@ -0,0 +1,838 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * NVMe debug
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/err.h>
+#include <linux/blk-mq.h>
+#include <linux/sort.h>
+#include <linux/version.h>
+
+#include "nvme.h"
+#include "fabrics.h"
+
+static ulong dev_size_mb = 16;
+module_param_named(dev_size_mb, dev_size_mb, ulong, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(dev_size_mb, "size in MiB of the namespace(def=8)");
+
+static unsigned sector_size = 512;
+module_param_named(sector_size, sector_size, uint, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(sector_size, "logical block size in bytes (def=512)");
+
+struct nvme_debug_ctrl {
+ struct nvme_ctrl ctrl;
+ uint32_t reg_cc;
+ struct blk_mq_tag_set admin_tag_set;
+ struct blk_mq_tag_set io_tag_set;
+ struct workqueue_struct *admin_wq;
+ struct workqueue_struct *io_wq;
+ struct list_head namespaces;
+ struct list_head list;
+};
+
+struct nvme_debug_namespace {
+ struct list_head list;
+ uint32_t nsid;
+ unsigned char sector_size_bits;
+ size_t n_sectors;
+ void *space;
+ char uuid[16];
+};
+
+struct nvme_debug_request {
+ struct nvme_request req;
+ struct nvme_command cmd;
+ struct work_struct work;
+};
+
+static LIST_HEAD(nvme_debug_ctrl_list);
+static DEFINE_MUTEX(nvme_debug_ctrl_mutex);
+
+DEFINE_STATIC_PERCPU_RWSEM(nvme_debug_sem);
+
+static inline struct nvme_debug_ctrl *to_debug_ctrl(struct nvme_ctrl *nctrl)
+{
+ return container_of(nctrl, struct nvme_debug_ctrl, ctrl);
+}
+
+static struct nvme_debug_namespace *nvme_debug_find_namespace(struct nvme_debug_ctrl *ctrl, unsigned nsid)
+{
+ struct nvme_debug_namespace *ns;
+ list_for_each_entry(ns, &ctrl->namespaces, list) {
+ if (ns->nsid == nsid)
+ return ns;
+ }
+ return NULL;
+}
+
+static bool nvme_debug_alloc_namespace(struct nvme_debug_ctrl *ctrl)
+{
+ struct nvme_debug_namespace *ns;
+ unsigned s;
+ size_t dsm;
+
+ ns = kmalloc(sizeof(struct nvme_debug_namespace), GFP_KERNEL);
+ if (!ns)
+ goto fail0;
+
+ ns->nsid = 1;
+ while (nvme_debug_find_namespace(ctrl, ns->nsid))
+ ns->nsid++;
+
+ s = READ_ONCE(sector_size);
+ if (s < 512 || s > PAGE_SIZE || !is_power_of_2(s))
+ goto fail1;
+ ns->sector_size_bits = __ffs(s);
+ dsm = READ_ONCE(dev_size_mb);
+ ns->n_sectors = dsm << (20 - ns->sector_size_bits);
+ if (ns->n_sectors >> (20 - ns->sector_size_bits) != dsm)
+ goto fail1;
+
+ if (ns->n_sectors << ns->sector_size_bits >> ns->sector_size_bits != ns->n_sectors)
+ goto fail1;
+
+ ns->space = vzalloc(ns->n_sectors << ns->sector_size_bits);
+ if (!ns->space)
+ goto fail1;
+
+ generate_random_uuid(ns->uuid);
+
+ list_add(&ns->list, &ctrl->namespaces);
+ return true;
+
+fail1:
+ kfree(ns);
+fail0:
+ return false;
+}
+
+static void nvme_debug_free_namespace(struct nvme_debug_namespace *ns)
+{
+ vfree(ns->space);
+ list_del(&ns->list);
+ kfree(ns);
+}
+
+static int nvme_debug_reg_read32(struct nvme_ctrl *nctrl, u32 off, u32 *val)
+{
+ struct nvme_debug_ctrl *ctrl = to_debug_ctrl(nctrl);
+ switch (off) {
+ case NVME_REG_VS: {
+ *val = 0x20000;
+ break;
+ }
+ case NVME_REG_CC: {
+ *val = ctrl->reg_cc;
+ break;
+ }
+ case NVME_REG_CSTS: {
+ *val = 0;
+ if (ctrl->reg_cc & NVME_CC_ENABLE)
+ *val |= NVME_CSTS_RDY;
+ if (ctrl->reg_cc & NVME_CC_SHN_MASK)
+ *val |= NVME_CSTS_SHST_CMPLT;
+ break;
+ }
+ default: {
+ printk("nvme_debug_reg_read32: %x\n", off);
+ return -ENOSYS;
+ }
+ }
+ return 0;
+}
+
+int nvme_debug_reg_read64(struct nvme_ctrl *nctrl, u32 off, u64 *val)
+{
+ switch (off) {
+ case NVME_REG_CAP: {
+ *val = (1ULL << 0) | (1ULL << 37);
+ break;
+ }
+ default: {
+ printk("nvme_debug_reg_read64: %x\n", off);
+ return -ENOSYS;
+ }
+ }
+ return 0;
+}
+
+int nvme_debug_reg_write32(struct nvme_ctrl *nctrl, u32 off, u32 val)
+{
+ struct nvme_debug_ctrl *ctrl = to_debug_ctrl(nctrl);
+ switch (off) {
+ case NVME_REG_CC: {
+ ctrl->reg_cc = val;
+ break;
+ }
+ default: {
+ printk("nvme_debug_reg_write32: %x, %x\n", off, val);
+ return -ENOSYS;
+ }
+ }
+ return 0;
+}
+
+static void nvme_debug_submit_async_event(struct nvme_ctrl *nctrl)
+{
+ printk("nvme_debug_submit_async_event\n");
+}
+
+static void nvme_debug_delete_ctrl(struct nvme_ctrl *nctrl)
+{
+ nvme_shutdown_ctrl(nctrl);
+}
+
+static void nvme_debug_free_namespaces(struct nvme_debug_ctrl *ctrl)
+{
+ if (!list_empty(&ctrl->namespaces)) {
+ struct nvme_debug_namespace *ns = container_of(ctrl->namespaces.next, struct nvme_debug_namespace, list);
+ nvme_debug_free_namespace(ns);
+ }
+}
+
+static void nvme_debug_free_ctrl(struct nvme_ctrl *nctrl)
+{
+ struct nvme_debug_ctrl *ctrl = to_debug_ctrl(nctrl);
+
+ flush_workqueue(ctrl->admin_wq);
+ flush_workqueue(ctrl->io_wq);
+
+ nvme_debug_free_namespaces(ctrl);
+
+ if (list_empty(&ctrl->list))
+ goto free_ctrl;
+
+ mutex_lock(&nvme_debug_ctrl_mutex);
+ list_del(&ctrl->list);
+ mutex_unlock(&nvme_debug_ctrl_mutex);
+
+ nvmf_free_options(nctrl->opts);
+free_ctrl:
+ destroy_workqueue(ctrl->admin_wq);
+ destroy_workqueue(ctrl->io_wq);
+ kfree(ctrl);
+}
+
+static int nvme_debug_get_address(struct nvme_ctrl *nctrl, char *buf, int size)
+{
+ int len = 0;
+ len += snprintf(buf, size, "debug");
+ return len;
+}
+
+static void nvme_debug_reset_ctrl_work(struct work_struct *work)
+{
+ printk("nvme_reset_ctrl_work\n");
+}
+
+static void copy_data_request(struct request *req, void *data, size_t size, bool to_req)
+{
+ if (req->rq_flags & RQF_SPECIAL_PAYLOAD) {
+ void *addr;
+ struct bio_vec bv = req->special_vec;
+ addr = kmap_atomic(bv.bv_page);
+ if (to_req) {
+ memcpy(addr + bv.bv_offset, data, bv.bv_len);
+ flush_dcache_page(bv.bv_page);
+ } else {
+ flush_dcache_page(bv.bv_page);
+ memcpy(data, addr + bv.bv_offset, bv.bv_len);
+ }
+ kunmap_atomic(addr);
+ data += bv.bv_len;
+ size -= bv.bv_len;
+ } else {
+ struct req_iterator bi;
+ struct bio_vec bv;
+ rq_for_each_segment(bv, req, bi) {
+ void *addr;
+ addr = kmap_atomic(bv.bv_page);
+ if (to_req) {
+ memcpy(addr + bv.bv_offset, data, bv.bv_len);
+ flush_dcache_page(bv.bv_page);
+ } else {
+ flush_dcache_page(bv.bv_page);
+ memcpy(data, addr + bv.bv_offset, bv.bv_len);
+ }
+ kunmap_atomic(addr);
+ data += bv.bv_len;
+ size -= bv.bv_len;
+ }
+ }
+ if (size)
+ printk("size mismatch: %lx\n", (unsigned long)size);
+}
+
+static void nvme_debug_identify_ns(struct nvme_debug_ctrl *ctrl, struct request *req)
+{
+ struct nvme_id_ns *id;
+ struct nvme_debug_namespace *ns;
+ struct nvme_debug_request *ndr = blk_mq_rq_to_pdu(req);
+
+ id = kzalloc(sizeof(struct nvme_id_ns), GFP_NOIO);
+ if (!id) {
+ blk_mq_end_request(req, BLK_STS_RESOURCE);
+ return;
+ }
+
+ ns = nvme_debug_find_namespace(ctrl, le32_to_cpu(ndr->cmd.identify.nsid));
+ if (!ns) {
+ nvme_req(req)->status = cpu_to_le16(NVME_SC_INVALID_NS);
+ goto free_ret;
+ }
+
+ id->nsze = cpu_to_le64(ns->n_sectors);
+ id->ncap = id->nsze;
+ id->nuse = id->nsze;
+ /*id->nlbaf = 0;*/
+ id->dlfeat = 0x01;
+ id->lbaf[0].ds = ns->sector_size_bits;
+
+ copy_data_request(req, id, sizeof(struct nvme_id_ns), true);
+
+free_ret:
+ kfree(id);
+ blk_mq_end_request(req, BLK_STS_OK);
+}
+
+static void nvme_debug_identify_ctrl(struct nvme_debug_ctrl *ctrl, struct request *req)
+{
+ struct nvme_debug_namespace *ns;
+ struct nvme_id_ctrl *id;
+ char ver[9];
+ size_t ver_len;
+
+ id = kzalloc(sizeof(struct nvme_id_ctrl), GFP_NOIO);
+ if (!id) {
+ blk_mq_end_request(req, BLK_STS_RESOURCE);
+ return;
+ }
+
+ id->vid = cpu_to_le16(PCI_VENDOR_ID_REDHAT);
+ id->ssvid = cpu_to_le16(PCI_VENDOR_ID_REDHAT);
+ memset(id->sn, ' ', sizeof id->sn);
+ memset(id->mn, ' ', sizeof id->mn);
+ memcpy(id->mn, "nvme-debug", 10);
+ snprintf(ver, sizeof ver, "%X", LINUX_VERSION_CODE);
+ ver_len = min(strlen(ver), sizeof id->fr);
+ memset(id->fr, ' ', sizeof id->fr);
+ memcpy(id->fr, ver, ver_len);
+ memcpy(id->ieee, "\xe9\xf2\x40", sizeof id->ieee);
+ id->ver = cpu_to_le32(0x20000);
+ id->kas = cpu_to_le16(100);
+ id->sqes = 0x66;
+ id->cqes = 0x44;
+ id->maxcmd = cpu_to_le16(1);
+ mutex_lock(&nvme_debug_ctrl_mutex);
+ list_for_each_entry(ns, &ctrl->namespaces, list) {
+ if (ns->nsid > le32_to_cpu(id->nn))
+ id->nn = cpu_to_le32(ns->nsid);
+ }
+ mutex_unlock(&nvme_debug_ctrl_mutex);
+ id->oncs = cpu_to_le16(NVME_CTRL_ONCS_COPY);
+ id->vwc = 0x6;
+ id->mnan = cpu_to_le32(0xffffffff);
+ strcpy(id->subnqn, "nqn.2021-09.com.redhat:nvme-debug");
+ id->ioccsz = cpu_to_le32(4);
+ id->iorcsz = cpu_to_le32(1);
+
+ copy_data_request(req, id, sizeof(struct nvme_id_ctrl), true);
+
+ kfree(id);
+ blk_mq_end_request(req, BLK_STS_OK);
+}
+
+static int cmp_ns(const void *a1, const void *a2)
+{
+ __u32 v1 = le32_to_cpu(*(__u32 *)a1);
+ __u32 v2 = le32_to_cpu(*(__u32 *)a2);
+ if (!v1)
+ v1 = 0xffffffffU;
+ if (!v2)
+ v2 = 0xffffffffU;
+ if (v1 < v2)
+ return -1;
+ if (v1 > v2)
+ return 1;
+ return 0;
+}
+
+static void nvme_debug_identify_active_ns(struct nvme_debug_ctrl *ctrl, struct request *req)
+{
+ struct nvme_debug_namespace *ns;
+ struct nvme_debug_request *ndr = blk_mq_rq_to_pdu(req);
+ unsigned size;
+ __u32 *id;
+ unsigned idp;
+
+ if (le32_to_cpu(ndr->cmd.identify.nsid) >= 0xFFFFFFFE) {
+ nvme_req(req)->status = cpu_to_le16(NVME_SC_INVALID_NS);
+ blk_mq_end_request(req, BLK_STS_OK);
+ return;
+ }
+
+ mutex_lock(&nvme_debug_ctrl_mutex);
+ size = 0;
+ list_for_each_entry(ns, &ctrl->namespaces, list) {
+ size++;
+ }
+ size = min(size, 1024U);
+
+ id = kzalloc(sizeof(__u32) * size, GFP_NOIO);
+ if (!id) {
+ mutex_unlock(&nvme_debug_ctrl_mutex);
+ blk_mq_end_request(req, BLK_STS_RESOURCE);
+ return;
+ }
+
+ idp = 0;
+ list_for_each_entry(ns, &ctrl->namespaces, list) {
+ if (ns->nsid > le32_to_cpu(ndr->cmd.identify.nsid))
+ id[idp++] = cpu_to_le32(ns->nsid);
+ }
+ mutex_unlock(&nvme_debug_ctrl_mutex);
+ sort(id, idp, sizeof(__u32), cmp_ns, NULL);
+
+ copy_data_request(req, id, sizeof(__u32) * 1024, true);
+
+ kfree(id);
+ blk_mq_end_request(req, BLK_STS_OK);
+}
+
+static void nvme_debug_identify_ns_desc_list(struct nvme_debug_ctrl *ctrl, struct request *req)
+{
+ struct nvme_ns_id_desc *id;
+ struct nvme_debug_namespace *ns;
+ struct nvme_debug_request *ndr = blk_mq_rq_to_pdu(req);
+ id = kzalloc(4096, GFP_NOIO);
+ if (!id) {
+ blk_mq_end_request(req, BLK_STS_RESOURCE);
+ return;
+ }
+
+ ns = nvme_debug_find_namespace(ctrl, le32_to_cpu(ndr->cmd.identify.nsid));
+ if (!ns) {
+ nvme_req(req)->status = cpu_to_le16(NVME_SC_INVALID_NS);
+ goto free_ret;
+ }
+
+ id->nidt = NVME_NIDT_UUID;
+ id->nidl = NVME_NIDT_UUID_LEN;
+ memcpy((char *)(id + 1), ns->uuid, NVME_NIDT_UUID_LEN);
+
+ copy_data_request(req, id, 4096, true);
+
+free_ret:
+ kfree(id);
+ blk_mq_end_request(req, BLK_STS_OK);
+}
+
+static void nvme_debug_identify_ctrl_cs(struct request *req)
+{
+ struct nvme_id_ctrl_nvm *id;
+ id = kzalloc(sizeof(struct nvme_id_ctrl_nvm), GFP_NOIO);
+ if (!id) {
+ blk_mq_end_request(req, BLK_STS_RESOURCE);
+ return;
+ }
+
+ copy_data_request(req, id, sizeof(struct nvme_id_ctrl_nvm), true);
+
+ kfree(id);
+ blk_mq_end_request(req, BLK_STS_OK);
+}
+
+static void nvme_debug_admin_rq(struct work_struct *w)
+{
+ struct nvme_debug_request *ndr = container_of(w, struct nvme_debug_request, work);
+ struct request *req = (struct request *)ndr - 1;
+ struct nvme_debug_ctrl *ctrl = to_debug_ctrl(ndr->req.ctrl);
+
+ switch (ndr->cmd.common.opcode) {
+ case nvme_admin_identify: {
+ switch (ndr->cmd.identify.cns) {
+ case NVME_ID_CNS_NS: {
+ percpu_down_read(&nvme_debug_sem);
+ nvme_debug_identify_ns(ctrl, req);
+ percpu_up_read(&nvme_debug_sem);
+ return;
+ };
+ case NVME_ID_CNS_CTRL: {
+ percpu_down_read(&nvme_debug_sem);
+ nvme_debug_identify_ctrl(ctrl, req);
+ percpu_up_read(&nvme_debug_sem);
+ return;
+ }
+ case NVME_ID_CNS_NS_ACTIVE_LIST: {
+ percpu_down_read(&nvme_debug_sem);
+ nvme_debug_identify_active_ns(ctrl, req);
+ percpu_up_read(&nvme_debug_sem);
+ return;
+ }
+ case NVME_ID_CNS_NS_DESC_LIST: {
+ percpu_down_read(&nvme_debug_sem);
+ nvme_debug_identify_ns_desc_list(ctrl, req);
+ percpu_up_read(&nvme_debug_sem);
+ return;
+ }
+ case NVME_ID_CNS_CS_CTRL: {
+ percpu_down_read(&nvme_debug_sem);
+ nvme_debug_identify_ctrl_cs(req);
+ percpu_up_read(&nvme_debug_sem);
+ return;
+ }
+ default: {
+ printk("nvme_admin_identify: %x\n", ndr->cmd.identify.cns);
+ break;
+ }
+ }
+ break;
+ }
+ default: {
+ printk("nvme_debug_admin_rq: %x\n", ndr->cmd.common.opcode);
+ break;
+ }
+ }
+ blk_mq_end_request(req, BLK_STS_NOTSUPP);
+}
+
+static void nvme_debug_rw(struct nvme_debug_namespace *ns, struct request *req)
+{
+ struct nvme_debug_request *ndr = blk_mq_rq_to_pdu(req);
+ __u64 lba = cpu_to_le64(ndr->cmd.rw.slba);
+ __u64 len = (__u64)cpu_to_le16(ndr->cmd.rw.length) + 1;
+ void *addr;
+ if (unlikely(lba + len < lba) || unlikely(lba + len > ns->n_sectors)) {
+ blk_mq_end_request(req, BLK_STS_NOTSUPP);
+ return;
+ }
+ addr = ns->space + (lba << ns->sector_size_bits);
+ copy_data_request(req, addr, len << ns->sector_size_bits, ndr->cmd.rw.opcode == nvme_cmd_read);
+ blk_mq_end_request(req, BLK_STS_OK);
+}
+
+static void nvme_debug_copy(struct nvme_debug_namespace *ns, struct request *req)
+{
+ struct nvme_debug_request *ndr = blk_mq_rq_to_pdu(req);
+ __u64 dlba = cpu_to_le64(ndr->cmd.copy.sdlba);
+ unsigned n_descs = ndr->cmd.copy.length + 1;
+ struct nvme_copy_desc *descs;
+ unsigned i, ret;
+
+ descs = kmalloc(sizeof(struct nvme_copy_desc) * n_descs, GFP_NOIO | __GFP_NORETRY | __GFP_NOWARN);
+ if (!descs) {
+ blk_mq_end_request(req, BLK_STS_RESOURCE);
+ return;
+ }
+
+ copy_data_request(req, descs, sizeof(struct nvme_copy_desc) * n_descs, false);
+
+ for (i = 0; i < n_descs; i++) {
+ struct nvme_copy_desc *desc = &descs[i];
+ __u64 slba = cpu_to_le64(desc->slba);
+ __u64 len = (__u64)cpu_to_le16(desc->length) + 1;
+ void *saddr, *daddr;
+
+ if (unlikely(slba + len < slba) || unlikely(slba + len > ns->n_sectors) ||
+ unlikely(dlba + len < dlba) || unlikely(dlba + len > ns->n_sectors)) {
+ ret = BLK_STS_NOTSUPP;
+ goto free_ret;
+ }
+
+ saddr = ns->space + (slba << ns->sector_size_bits);
+ daddr = ns->space + (dlba << ns->sector_size_bits);
+
+ memcpy(daddr, saddr, len << ns->sector_size_bits);
+
+ dlba += len;
+ }
+
+ ret = BLK_STS_OK;
+
+free_ret:
+ kfree(descs);
+
+ blk_mq_end_request(req, ret);
+}
+
+static void nvme_debug_io_rq(struct work_struct *w)
+{
+ struct nvme_debug_request *ndr = container_of(w, struct nvme_debug_request, work);
+ struct request *req = (struct request *)ndr - 1;
+ struct nvme_debug_ctrl *ctrl = to_debug_ctrl(ndr->req.ctrl);
+ __u32 nsid = le32_to_cpu(ndr->cmd.common.nsid);
+ struct nvme_debug_namespace *ns;
+
+ percpu_down_read(&nvme_debug_sem);
+ ns = nvme_debug_find_namespace(ctrl, nsid);
+ if (unlikely(!ns))
+ goto ret_notsupp;
+
+ switch (ndr->cmd.common.opcode) {
+ case nvme_cmd_flush: {
+ blk_mq_end_request(req, BLK_STS_OK);
+ goto ret;
+ }
+ case nvme_cmd_read:
+ case nvme_cmd_write: {
+ nvme_debug_rw(ns, req);
+ goto ret;
+ }
+ case nvme_cmd_copy: {
+ nvme_debug_copy(ns, req);
+ goto ret;
+ }
+ default: {
+ printk("nvme_debug_io_rq: %x\n", ndr->cmd.common.opcode);
+ break;
+ }
+ }
+ret_notsupp:
+ blk_mq_end_request(req, BLK_STS_NOTSUPP);
+ret:
+ percpu_up_read(&nvme_debug_sem);
+}
+
+static blk_status_t nvme_debug_queue_rq(struct blk_mq_hw_ctx *hctx, const struct blk_mq_queue_data *bd)
+{
+ struct request *req = bd->rq;
+ struct nvme_debug_request *ndr = blk_mq_rq_to_pdu(req);
+ struct nvme_debug_ctrl *ctrl = to_debug_ctrl(ndr->req.ctrl);
+ struct nvme_ns *ns = hctx->queue->queuedata;
+ blk_status_t r;
+
+ r = nvme_setup_cmd(ns, req);
+ if (unlikely(r))
+ return r;
+
+ if (!ns) {
+ INIT_WORK(&ndr->work, nvme_debug_admin_rq);
+ queue_work(ctrl->admin_wq, &ndr->work);
+ return BLK_STS_OK;
+ } else if (unlikely((req->cmd_flags & REQ_OP_MASK) == REQ_OP_COPY_READ_TOKEN)) {
+ blk_mq_end_request(req, BLK_STS_OK);
+ return BLK_STS_OK;
+ } else {
+ INIT_WORK(&ndr->work, nvme_debug_io_rq);
+ queue_work(ctrl->io_wq, &ndr->work);
+ return BLK_STS_OK;
+ }
+}
+
+static int nvme_debug_init_request(struct blk_mq_tag_set *set, struct request *req, unsigned hctx_idx, unsigned numa_node)
+{
+ struct nvme_debug_ctrl *ctrl = set->driver_data;
+ struct nvme_debug_request *ndr = blk_mq_rq_to_pdu(req);
+ nvme_req(req)->ctrl = &ctrl->ctrl;
+ nvme_req(req)->cmd = &ndr->cmd;
+ return 0;
+}
+
+static int nvme_debug_init_hctx(struct blk_mq_hw_ctx *hctx, void *data, unsigned hctx_idx)
+{
+ struct nvme_debug_ctrl *ctrl = data;
+ hctx->driver_data = ctrl;
+ return 0;
+}
+
+static const struct blk_mq_ops nvme_debug_mq_ops = {
+ .queue_rq = nvme_debug_queue_rq,
+ .init_request = nvme_debug_init_request,
+ .init_hctx = nvme_debug_init_hctx,
+};
+
+static int nvme_debug_configure_admin_queue(struct nvme_debug_ctrl *ctrl)
+{
+ int r;
+
+ memset(&ctrl->admin_tag_set, 0, sizeof(ctrl->admin_tag_set));
+ ctrl->admin_tag_set.ops = &nvme_debug_mq_ops;
+ ctrl->admin_tag_set.queue_depth = NVME_AQ_MQ_TAG_DEPTH;
+ ctrl->admin_tag_set.reserved_tags = NVMF_RESERVED_TAGS;
+ ctrl->admin_tag_set.numa_node = ctrl->ctrl.numa_node;
+ ctrl->admin_tag_set.cmd_size = sizeof(struct nvme_debug_request);
+ ctrl->admin_tag_set.driver_data = ctrl;
+ ctrl->admin_tag_set.nr_hw_queues = 1;
+ ctrl->admin_tag_set.timeout = NVME_ADMIN_TIMEOUT;
+ ctrl->admin_tag_set.flags = BLK_MQ_F_NO_SCHED;
+
+ r = blk_mq_alloc_tag_set(&ctrl->admin_tag_set);
+ if (r)
+ goto ret0;
+ ctrl->ctrl.admin_tagset = &ctrl->admin_tag_set;
+
+ ctrl->ctrl.admin_q = blk_mq_init_queue(&ctrl->admin_tag_set);
+ if (IS_ERR(ctrl->ctrl.admin_q)) {
+ r = PTR_ERR(ctrl->ctrl.admin_q);
+ goto ret1;
+ }
+
+ r = nvme_enable_ctrl(&ctrl->ctrl);
+ if (r)
+ goto ret2;
+
+ nvme_start_admin_queue(&ctrl->ctrl);
+
+ r = nvme_init_ctrl_finish(&ctrl->ctrl);
+ if (r)
+ goto ret3;
+
+ return 0;
+
+ret3:
+ nvme_stop_admin_queue(&ctrl->ctrl);
+ blk_sync_queue(ctrl->ctrl.admin_q);
+ret2:
+ blk_cleanup_queue(ctrl->ctrl.admin_q);
+ret1:
+ blk_mq_free_tag_set(&ctrl->admin_tag_set);
+ret0:
+ return r;
+}
+
+static int nvme_debug_configure_io_queue(struct nvme_debug_ctrl *ctrl)
+{
+ int r;
+
+ memset(&ctrl->io_tag_set, 0, sizeof(ctrl->io_tag_set));
+ ctrl->io_tag_set.ops = &nvme_debug_mq_ops;
+ ctrl->io_tag_set.queue_depth = NVME_AQ_MQ_TAG_DEPTH;
+ ctrl->io_tag_set.reserved_tags = NVMF_RESERVED_TAGS;
+ ctrl->io_tag_set.numa_node = ctrl->ctrl.numa_node;
+ ctrl->io_tag_set.cmd_size = sizeof(struct nvme_debug_request);
+ ctrl->io_tag_set.driver_data = ctrl;
+ ctrl->io_tag_set.nr_hw_queues = 1;
+ ctrl->io_tag_set.timeout = NVME_ADMIN_TIMEOUT;
+ ctrl->io_tag_set.flags = BLK_MQ_F_NO_SCHED;
+
+ r = blk_mq_alloc_tag_set(&ctrl->io_tag_set);
+ if (r)
+ goto ret0;
+ ctrl->ctrl.tagset = &ctrl->io_tag_set;
+ return 0;
+
+ret0:
+ return r;
+}
+
+static const struct nvme_ctrl_ops nvme_debug_ctrl_ops = {
+ .name = "debug",
+ .module = THIS_MODULE,
+ .flags = NVME_F_FABRICS,
+ .reg_read32 = nvme_debug_reg_read32,
+ .reg_read64 = nvme_debug_reg_read64,
+ .reg_write32 = nvme_debug_reg_write32,
+ .free_ctrl = nvme_debug_free_ctrl,
+ .submit_async_event = nvme_debug_submit_async_event,
+ .delete_ctrl = nvme_debug_delete_ctrl,
+ .get_address = nvme_debug_get_address,
+};
+
+static struct nvme_ctrl *nvme_debug_create_ctrl(struct device *dev,
+ struct nvmf_ctrl_options *opts)
+{
+ int r;
+ struct nvme_debug_ctrl *ctrl;
+
+ ctrl = kzalloc(sizeof(struct nvme_debug_ctrl), GFP_KERNEL);
+ if (!ctrl) {
+ r = -ENOMEM;
+ goto ret0;
+ }
+
+ INIT_LIST_HEAD(&ctrl->list);
+ INIT_LIST_HEAD(&ctrl->namespaces);
+ ctrl->ctrl.opts = opts;
+ ctrl->ctrl.queue_count = 2;
+ INIT_WORK(&ctrl->ctrl.reset_work, nvme_debug_reset_ctrl_work);
+
+ ctrl->admin_wq = alloc_workqueue("nvme-debug-admin", WQ_MEM_RECLAIM | WQ_UNBOUND, 1);
+ if (!ctrl->admin_wq)
+ goto ret1;
+
+ ctrl->io_wq = alloc_workqueue("nvme-debug-io", WQ_MEM_RECLAIM, 0);
+ if (!ctrl->io_wq)
+ goto ret1;
+
+ if (!nvme_debug_alloc_namespace(ctrl)) {
+ r = -ENOMEM;
+ goto ret1;
+ }
+
+ r = nvme_init_ctrl(&ctrl->ctrl, dev, &nvme_debug_ctrl_ops, 0);
+ if (r)
+ goto ret1;
+
+ if (!nvme_change_ctrl_state(&ctrl->ctrl, NVME_CTRL_CONNECTING))
+ goto ret2;
+
+ r = nvme_debug_configure_admin_queue(ctrl);
+ if (r)
+ goto ret2;
+
+ r = nvme_debug_configure_io_queue(ctrl);
+ if (r)
+ goto ret2;
+
+ if (!nvme_change_ctrl_state(&ctrl->ctrl, NVME_CTRL_LIVE))
+ goto ret2;
+
+ nvme_start_ctrl(&ctrl->ctrl);
+
+ mutex_lock(&nvme_debug_ctrl_mutex);
+ list_add_tail(&ctrl->list, &nvme_debug_ctrl_list);
+ mutex_unlock(&nvme_debug_ctrl_mutex);
+
+ return &ctrl->ctrl;
+
+ret2:
+ nvme_uninit_ctrl(&ctrl->ctrl);
+ nvme_put_ctrl(&ctrl->ctrl);
+ return ERR_PTR(r);
+ret1:
+ nvme_debug_free_namespaces(ctrl);
+ if (ctrl->admin_wq)
+ destroy_workqueue(ctrl->admin_wq);
+ if (ctrl->io_wq)
+ destroy_workqueue(ctrl->io_wq);
+ kfree(ctrl);
+ret0:
+ return ERR_PTR(r);
+}
+
+static struct nvmf_transport_ops nvme_debug_transport = {
+ .name = "debug",
+ .module = THIS_MODULE,
+ .required_opts = NVMF_OPT_TRADDR,
+ .allowed_opts = NVMF_OPT_CTRL_LOSS_TMO,
+ .create_ctrl = nvme_debug_create_ctrl,
+};
+
+static int __init nvme_debug_init_module(void)
+{
+ nvmf_register_transport(&nvme_debug_transport);
+ return 0;
+}
+
+static void __exit nvme_debug_cleanup_module(void)
+{
+ struct nvme_debug_ctrl *ctrl;
+
+ nvmf_unregister_transport(&nvme_debug_transport);
+
+ mutex_lock(&nvme_debug_ctrl_mutex);
+ list_for_each_entry(ctrl, &nvme_debug_ctrl_list, list) {
+ nvme_delete_ctrl(&ctrl->ctrl);
+ }
+ mutex_unlock(&nvme_debug_ctrl_mutex);
+ flush_workqueue(nvme_delete_wq);
+}
+
+module_init(nvme_debug_init_module);
+module_exit(nvme_debug_cleanup_module);
+
+MODULE_LICENSE("GPL v2");
^ permalink raw reply [flat|nested] 272+ messages in thread* [dm-devel] [RFC PATCH 3/3] nvme: add the "debug" host driver
@ 2022-02-01 18:33 ` Mikulas Patocka
0 siblings, 0 replies; 272+ messages in thread
From: Mikulas Patocka @ 2022-02-01 18:33 UTC (permalink / raw)
To: Javier González
Cc: djwong, linux-nvme, clm, dm-devel, osandov,
msnitzer@redhat.com >> msnitzer@redhat.com,
Bart Van Assche, linux-scsi, Christoph Hellwig, roland,
zach.brown, Chaitanya Kulkarni, josef, linux-block, dsterba,
kbus @imap.gmail.com>> Keith Busch, Frederick.Knight,
Jens Axboe, tytso, Kanchan Joshi,
martin.petersen@oracle.com >> Martin K. Petersen, jack,
linux-fsdevel, lsf-pc
This patch adds a new driver "nvme-debug". It uses memory as a backing
store and it is used to test the copy offload functionality.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
---
drivers/nvme/host/Kconfig | 13
drivers/nvme/host/Makefile | 1
drivers/nvme/host/nvme-debug.c | 838 +++++++++++++++++++++++++++++++++++++++++
3 files changed, 852 insertions(+)
Index: linux-2.6/drivers/nvme/host/Kconfig
===================================================================
--- linux-2.6.orig/drivers/nvme/host/Kconfig 2022-02-01 18:34:22.000000000 +0100
+++ linux-2.6/drivers/nvme/host/Kconfig 2022-02-01 18:34:22.000000000 +0100
@@ -83,3 +83,16 @@ config NVME_TCP
from https://github.com/linux-nvme/nvme-cli.
If unsure, say N.
+
+config NVME_DEBUG
+ tristate "NVM Express debug"
+ depends on INET
+ depends on BLOCK
+ select NVME_CORE
+ select NVME_FABRICS
+ select CRYPTO
+ select CRYPTO_CRC32C
+ help
+ This pseudo driver simulates a NVMe adapter.
+
+ If unsure, say N.
Index: linux-2.6/drivers/nvme/host/Makefile
===================================================================
--- linux-2.6.orig/drivers/nvme/host/Makefile 2022-02-01 18:34:22.000000000 +0100
+++ linux-2.6/drivers/nvme/host/Makefile 2022-02-01 18:34:22.000000000 +0100
@@ -8,6 +8,7 @@ obj-$(CONFIG_NVME_FABRICS) += nvme-fabr
obj-$(CONFIG_NVME_RDMA) += nvme-rdma.o
obj-$(CONFIG_NVME_FC) += nvme-fc.o
obj-$(CONFIG_NVME_TCP) += nvme-tcp.o
+obj-$(CONFIG_NVME_DEBUG) += nvme-debug.o
nvme-core-y := core.o ioctl.o
nvme-core-$(CONFIG_TRACING) += trace.o
Index: linux-2.6/drivers/nvme/host/nvme-debug.c
===================================================================
--- /dev/null 1970-01-01 00:00:00.000000000 +0000
+++ linux-2.6/drivers/nvme/host/nvme-debug.c 2022-02-01 18:34:22.000000000 +0100
@@ -0,0 +1,838 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * NVMe debug
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/err.h>
+#include <linux/blk-mq.h>
+#include <linux/sort.h>
+#include <linux/version.h>
+
+#include "nvme.h"
+#include "fabrics.h"
+
+static ulong dev_size_mb = 16;
+module_param_named(dev_size_mb, dev_size_mb, ulong, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(dev_size_mb, "size in MiB of the namespace(def=8)");
+
+static unsigned sector_size = 512;
+module_param_named(sector_size, sector_size, uint, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(sector_size, "logical block size in bytes (def=512)");
+
+struct nvme_debug_ctrl {
+ struct nvme_ctrl ctrl;
+ uint32_t reg_cc;
+ struct blk_mq_tag_set admin_tag_set;
+ struct blk_mq_tag_set io_tag_set;
+ struct workqueue_struct *admin_wq;
+ struct workqueue_struct *io_wq;
+ struct list_head namespaces;
+ struct list_head list;
+};
+
+struct nvme_debug_namespace {
+ struct list_head list;
+ uint32_t nsid;
+ unsigned char sector_size_bits;
+ size_t n_sectors;
+ void *space;
+ char uuid[16];
+};
+
+struct nvme_debug_request {
+ struct nvme_request req;
+ struct nvme_command cmd;
+ struct work_struct work;
+};
+
+static LIST_HEAD(nvme_debug_ctrl_list);
+static DEFINE_MUTEX(nvme_debug_ctrl_mutex);
+
+DEFINE_STATIC_PERCPU_RWSEM(nvme_debug_sem);
+
+static inline struct nvme_debug_ctrl *to_debug_ctrl(struct nvme_ctrl *nctrl)
+{
+ return container_of(nctrl, struct nvme_debug_ctrl, ctrl);
+}
+
+static struct nvme_debug_namespace *nvme_debug_find_namespace(struct nvme_debug_ctrl *ctrl, unsigned nsid)
+{
+ struct nvme_debug_namespace *ns;
+ list_for_each_entry(ns, &ctrl->namespaces, list) {
+ if (ns->nsid == nsid)
+ return ns;
+ }
+ return NULL;
+}
+
+static bool nvme_debug_alloc_namespace(struct nvme_debug_ctrl *ctrl)
+{
+ struct nvme_debug_namespace *ns;
+ unsigned s;
+ size_t dsm;
+
+ ns = kmalloc(sizeof(struct nvme_debug_namespace), GFP_KERNEL);
+ if (!ns)
+ goto fail0;
+
+ ns->nsid = 1;
+ while (nvme_debug_find_namespace(ctrl, ns->nsid))
+ ns->nsid++;
+
+ s = READ_ONCE(sector_size);
+ if (s < 512 || s > PAGE_SIZE || !is_power_of_2(s))
+ goto fail1;
+ ns->sector_size_bits = __ffs(s);
+ dsm = READ_ONCE(dev_size_mb);
+ ns->n_sectors = dsm << (20 - ns->sector_size_bits);
+ if (ns->n_sectors >> (20 - ns->sector_size_bits) != dsm)
+ goto fail1;
+
+ if (ns->n_sectors << ns->sector_size_bits >> ns->sector_size_bits != ns->n_sectors)
+ goto fail1;
+
+ ns->space = vzalloc(ns->n_sectors << ns->sector_size_bits);
+ if (!ns->space)
+ goto fail1;
+
+ generate_random_uuid(ns->uuid);
+
+ list_add(&ns->list, &ctrl->namespaces);
+ return true;
+
+fail1:
+ kfree(ns);
+fail0:
+ return false;
+}
+
+static void nvme_debug_free_namespace(struct nvme_debug_namespace *ns)
+{
+ vfree(ns->space);
+ list_del(&ns->list);
+ kfree(ns);
+}
+
+static int nvme_debug_reg_read32(struct nvme_ctrl *nctrl, u32 off, u32 *val)
+{
+ struct nvme_debug_ctrl *ctrl = to_debug_ctrl(nctrl);
+ switch (off) {
+ case NVME_REG_VS: {
+ *val = 0x20000;
+ break;
+ }
+ case NVME_REG_CC: {
+ *val = ctrl->reg_cc;
+ break;
+ }
+ case NVME_REG_CSTS: {
+ *val = 0;
+ if (ctrl->reg_cc & NVME_CC_ENABLE)
+ *val |= NVME_CSTS_RDY;
+ if (ctrl->reg_cc & NVME_CC_SHN_MASK)
+ *val |= NVME_CSTS_SHST_CMPLT;
+ break;
+ }
+ default: {
+ printk("nvme_debug_reg_read32: %x\n", off);
+ return -ENOSYS;
+ }
+ }
+ return 0;
+}
+
+int nvme_debug_reg_read64(struct nvme_ctrl *nctrl, u32 off, u64 *val)
+{
+ switch (off) {
+ case NVME_REG_CAP: {
+ *val = (1ULL << 0) | (1ULL << 37);
+ break;
+ }
+ default: {
+ printk("nvme_debug_reg_read64: %x\n", off);
+ return -ENOSYS;
+ }
+ }
+ return 0;
+}
+
+int nvme_debug_reg_write32(struct nvme_ctrl *nctrl, u32 off, u32 val)
+{
+ struct nvme_debug_ctrl *ctrl = to_debug_ctrl(nctrl);
+ switch (off) {
+ case NVME_REG_CC: {
+ ctrl->reg_cc = val;
+ break;
+ }
+ default: {
+ printk("nvme_debug_reg_write32: %x, %x\n", off, val);
+ return -ENOSYS;
+ }
+ }
+ return 0;
+}
+
+static void nvme_debug_submit_async_event(struct nvme_ctrl *nctrl)
+{
+ printk("nvme_debug_submit_async_event\n");
+}
+
+static void nvme_debug_delete_ctrl(struct nvme_ctrl *nctrl)
+{
+ nvme_shutdown_ctrl(nctrl);
+}
+
+static void nvme_debug_free_namespaces(struct nvme_debug_ctrl *ctrl)
+{
+ if (!list_empty(&ctrl->namespaces)) {
+ struct nvme_debug_namespace *ns = container_of(ctrl->namespaces.next, struct nvme_debug_namespace, list);
+ nvme_debug_free_namespace(ns);
+ }
+}
+
+static void nvme_debug_free_ctrl(struct nvme_ctrl *nctrl)
+{
+ struct nvme_debug_ctrl *ctrl = to_debug_ctrl(nctrl);
+
+ flush_workqueue(ctrl->admin_wq);
+ flush_workqueue(ctrl->io_wq);
+
+ nvme_debug_free_namespaces(ctrl);
+
+ if (list_empty(&ctrl->list))
+ goto free_ctrl;
+
+ mutex_lock(&nvme_debug_ctrl_mutex);
+ list_del(&ctrl->list);
+ mutex_unlock(&nvme_debug_ctrl_mutex);
+
+ nvmf_free_options(nctrl->opts);
+free_ctrl:
+ destroy_workqueue(ctrl->admin_wq);
+ destroy_workqueue(ctrl->io_wq);
+ kfree(ctrl);
+}
+
+static int nvme_debug_get_address(struct nvme_ctrl *nctrl, char *buf, int size)
+{
+ int len = 0;
+ len += snprintf(buf, size, "debug");
+ return len;
+}
+
+static void nvme_debug_reset_ctrl_work(struct work_struct *work)
+{
+ printk("nvme_reset_ctrl_work\n");
+}
+
+static void copy_data_request(struct request *req, void *data, size_t size, bool to_req)
+{
+ if (req->rq_flags & RQF_SPECIAL_PAYLOAD) {
+ void *addr;
+ struct bio_vec bv = req->special_vec;
+ addr = kmap_atomic(bv.bv_page);
+ if (to_req) {
+ memcpy(addr + bv.bv_offset, data, bv.bv_len);
+ flush_dcache_page(bv.bv_page);
+ } else {
+ flush_dcache_page(bv.bv_page);
+ memcpy(data, addr + bv.bv_offset, bv.bv_len);
+ }
+ kunmap_atomic(addr);
+ data += bv.bv_len;
+ size -= bv.bv_len;
+ } else {
+ struct req_iterator bi;
+ struct bio_vec bv;
+ rq_for_each_segment(bv, req, bi) {
+ void *addr;
+ addr = kmap_atomic(bv.bv_page);
+ if (to_req) {
+ memcpy(addr + bv.bv_offset, data, bv.bv_len);
+ flush_dcache_page(bv.bv_page);
+ } else {
+ flush_dcache_page(bv.bv_page);
+ memcpy(data, addr + bv.bv_offset, bv.bv_len);
+ }
+ kunmap_atomic(addr);
+ data += bv.bv_len;
+ size -= bv.bv_len;
+ }
+ }
+ if (size)
+ printk("size mismatch: %lx\n", (unsigned long)size);
+}
+
+static void nvme_debug_identify_ns(struct nvme_debug_ctrl *ctrl, struct request *req)
+{
+ struct nvme_id_ns *id;
+ struct nvme_debug_namespace *ns;
+ struct nvme_debug_request *ndr = blk_mq_rq_to_pdu(req);
+
+ id = kzalloc(sizeof(struct nvme_id_ns), GFP_NOIO);
+ if (!id) {
+ blk_mq_end_request(req, BLK_STS_RESOURCE);
+ return;
+ }
+
+ ns = nvme_debug_find_namespace(ctrl, le32_to_cpu(ndr->cmd.identify.nsid));
+ if (!ns) {
+ nvme_req(req)->status = cpu_to_le16(NVME_SC_INVALID_NS);
+ goto free_ret;
+ }
+
+ id->nsze = cpu_to_le64(ns->n_sectors);
+ id->ncap = id->nsze;
+ id->nuse = id->nsze;
+ /*id->nlbaf = 0;*/
+ id->dlfeat = 0x01;
+ id->lbaf[0].ds = ns->sector_size_bits;
+
+ copy_data_request(req, id, sizeof(struct nvme_id_ns), true);
+
+free_ret:
+ kfree(id);
+ blk_mq_end_request(req, BLK_STS_OK);
+}
+
+static void nvme_debug_identify_ctrl(struct nvme_debug_ctrl *ctrl, struct request *req)
+{
+ struct nvme_debug_namespace *ns;
+ struct nvme_id_ctrl *id;
+ char ver[9];
+ size_t ver_len;
+
+ id = kzalloc(sizeof(struct nvme_id_ctrl), GFP_NOIO);
+ if (!id) {
+ blk_mq_end_request(req, BLK_STS_RESOURCE);
+ return;
+ }
+
+ id->vid = cpu_to_le16(PCI_VENDOR_ID_REDHAT);
+ id->ssvid = cpu_to_le16(PCI_VENDOR_ID_REDHAT);
+ memset(id->sn, ' ', sizeof id->sn);
+ memset(id->mn, ' ', sizeof id->mn);
+ memcpy(id->mn, "nvme-debug", 10);
+ snprintf(ver, sizeof ver, "%X", LINUX_VERSION_CODE);
+ ver_len = min(strlen(ver), sizeof id->fr);
+ memset(id->fr, ' ', sizeof id->fr);
+ memcpy(id->fr, ver, ver_len);
+ memcpy(id->ieee, "\xe9\xf2\x40", sizeof id->ieee);
+ id->ver = cpu_to_le32(0x20000);
+ id->kas = cpu_to_le16(100);
+ id->sqes = 0x66;
+ id->cqes = 0x44;
+ id->maxcmd = cpu_to_le16(1);
+ mutex_lock(&nvme_debug_ctrl_mutex);
+ list_for_each_entry(ns, &ctrl->namespaces, list) {
+ if (ns->nsid > le32_to_cpu(id->nn))
+ id->nn = cpu_to_le32(ns->nsid);
+ }
+ mutex_unlock(&nvme_debug_ctrl_mutex);
+ id->oncs = cpu_to_le16(NVME_CTRL_ONCS_COPY);
+ id->vwc = 0x6;
+ id->mnan = cpu_to_le32(0xffffffff);
+ strcpy(id->subnqn, "nqn.2021-09.com.redhat:nvme-debug");
+ id->ioccsz = cpu_to_le32(4);
+ id->iorcsz = cpu_to_le32(1);
+
+ copy_data_request(req, id, sizeof(struct nvme_id_ctrl), true);
+
+ kfree(id);
+ blk_mq_end_request(req, BLK_STS_OK);
+}
+
+static int cmp_ns(const void *a1, const void *a2)
+{
+ __u32 v1 = le32_to_cpu(*(__u32 *)a1);
+ __u32 v2 = le32_to_cpu(*(__u32 *)a2);
+ if (!v1)
+ v1 = 0xffffffffU;
+ if (!v2)
+ v2 = 0xffffffffU;
+ if (v1 < v2)
+ return -1;
+ if (v1 > v2)
+ return 1;
+ return 0;
+}
+
+static void nvme_debug_identify_active_ns(struct nvme_debug_ctrl *ctrl, struct request *req)
+{
+ struct nvme_debug_namespace *ns;
+ struct nvme_debug_request *ndr = blk_mq_rq_to_pdu(req);
+ unsigned size;
+ __u32 *id;
+ unsigned idp;
+
+ if (le32_to_cpu(ndr->cmd.identify.nsid) >= 0xFFFFFFFE) {
+ nvme_req(req)->status = cpu_to_le16(NVME_SC_INVALID_NS);
+ blk_mq_end_request(req, BLK_STS_OK);
+ return;
+ }
+
+ mutex_lock(&nvme_debug_ctrl_mutex);
+ size = 0;
+ list_for_each_entry(ns, &ctrl->namespaces, list) {
+ size++;
+ }
+ size = min(size, 1024U);
+
+ id = kzalloc(sizeof(__u32) * size, GFP_NOIO);
+ if (!id) {
+ mutex_unlock(&nvme_debug_ctrl_mutex);
+ blk_mq_end_request(req, BLK_STS_RESOURCE);
+ return;
+ }
+
+ idp = 0;
+ list_for_each_entry(ns, &ctrl->namespaces, list) {
+ if (ns->nsid > le32_to_cpu(ndr->cmd.identify.nsid))
+ id[idp++] = cpu_to_le32(ns->nsid);
+ }
+ mutex_unlock(&nvme_debug_ctrl_mutex);
+ sort(id, idp, sizeof(__u32), cmp_ns, NULL);
+
+ copy_data_request(req, id, sizeof(__u32) * 1024, true);
+
+ kfree(id);
+ blk_mq_end_request(req, BLK_STS_OK);
+}
+
+static void nvme_debug_identify_ns_desc_list(struct nvme_debug_ctrl *ctrl, struct request *req)
+{
+ struct nvme_ns_id_desc *id;
+ struct nvme_debug_namespace *ns;
+ struct nvme_debug_request *ndr = blk_mq_rq_to_pdu(req);
+ id = kzalloc(4096, GFP_NOIO);
+ if (!id) {
+ blk_mq_end_request(req, BLK_STS_RESOURCE);
+ return;
+ }
+
+ ns = nvme_debug_find_namespace(ctrl, le32_to_cpu(ndr->cmd.identify.nsid));
+ if (!ns) {
+ nvme_req(req)->status = cpu_to_le16(NVME_SC_INVALID_NS);
+ goto free_ret;
+ }
+
+ id->nidt = NVME_NIDT_UUID;
+ id->nidl = NVME_NIDT_UUID_LEN;
+ memcpy((char *)(id + 1), ns->uuid, NVME_NIDT_UUID_LEN);
+
+ copy_data_request(req, id, 4096, true);
+
+free_ret:
+ kfree(id);
+ blk_mq_end_request(req, BLK_STS_OK);
+}
+
+static void nvme_debug_identify_ctrl_cs(struct request *req)
+{
+ struct nvme_id_ctrl_nvm *id;
+ id = kzalloc(sizeof(struct nvme_id_ctrl_nvm), GFP_NOIO);
+ if (!id) {
+ blk_mq_end_request(req, BLK_STS_RESOURCE);
+ return;
+ }
+
+ copy_data_request(req, id, sizeof(struct nvme_id_ctrl_nvm), true);
+
+ kfree(id);
+ blk_mq_end_request(req, BLK_STS_OK);
+}
+
+static void nvme_debug_admin_rq(struct work_struct *w)
+{
+ struct nvme_debug_request *ndr = container_of(w, struct nvme_debug_request, work);
+ struct request *req = (struct request *)ndr - 1;
+ struct nvme_debug_ctrl *ctrl = to_debug_ctrl(ndr->req.ctrl);
+
+ switch (ndr->cmd.common.opcode) {
+ case nvme_admin_identify: {
+ switch (ndr->cmd.identify.cns) {
+ case NVME_ID_CNS_NS: {
+ percpu_down_read(&nvme_debug_sem);
+ nvme_debug_identify_ns(ctrl, req);
+ percpu_up_read(&nvme_debug_sem);
+ return;
+ };
+ case NVME_ID_CNS_CTRL: {
+ percpu_down_read(&nvme_debug_sem);
+ nvme_debug_identify_ctrl(ctrl, req);
+ percpu_up_read(&nvme_debug_sem);
+ return;
+ }
+ case NVME_ID_CNS_NS_ACTIVE_LIST: {
+ percpu_down_read(&nvme_debug_sem);
+ nvme_debug_identify_active_ns(ctrl, req);
+ percpu_up_read(&nvme_debug_sem);
+ return;
+ }
+ case NVME_ID_CNS_NS_DESC_LIST: {
+ percpu_down_read(&nvme_debug_sem);
+ nvme_debug_identify_ns_desc_list(ctrl, req);
+ percpu_up_read(&nvme_debug_sem);
+ return;
+ }
+ case NVME_ID_CNS_CS_CTRL: {
+ percpu_down_read(&nvme_debug_sem);
+ nvme_debug_identify_ctrl_cs(req);
+ percpu_up_read(&nvme_debug_sem);
+ return;
+ }
+ default: {
+ printk("nvme_admin_identify: %x\n", ndr->cmd.identify.cns);
+ break;
+ }
+ }
+ break;
+ }
+ default: {
+ printk("nvme_debug_admin_rq: %x\n", ndr->cmd.common.opcode);
+ break;
+ }
+ }
+ blk_mq_end_request(req, BLK_STS_NOTSUPP);
+}
+
+static void nvme_debug_rw(struct nvme_debug_namespace *ns, struct request *req)
+{
+ struct nvme_debug_request *ndr = blk_mq_rq_to_pdu(req);
+ __u64 lba = cpu_to_le64(ndr->cmd.rw.slba);
+ __u64 len = (__u64)cpu_to_le16(ndr->cmd.rw.length) + 1;
+ void *addr;
+ if (unlikely(lba + len < lba) || unlikely(lba + len > ns->n_sectors)) {
+ blk_mq_end_request(req, BLK_STS_NOTSUPP);
+ return;
+ }
+ addr = ns->space + (lba << ns->sector_size_bits);
+ copy_data_request(req, addr, len << ns->sector_size_bits, ndr->cmd.rw.opcode == nvme_cmd_read);
+ blk_mq_end_request(req, BLK_STS_OK);
+}
+
+static void nvme_debug_copy(struct nvme_debug_namespace *ns, struct request *req)
+{
+ struct nvme_debug_request *ndr = blk_mq_rq_to_pdu(req);
+ __u64 dlba = cpu_to_le64(ndr->cmd.copy.sdlba);
+ unsigned n_descs = ndr->cmd.copy.length + 1;
+ struct nvme_copy_desc *descs;
+ unsigned i, ret;
+
+ descs = kmalloc(sizeof(struct nvme_copy_desc) * n_descs, GFP_NOIO | __GFP_NORETRY | __GFP_NOWARN);
+ if (!descs) {
+ blk_mq_end_request(req, BLK_STS_RESOURCE);
+ return;
+ }
+
+ copy_data_request(req, descs, sizeof(struct nvme_copy_desc) * n_descs, false);
+
+ for (i = 0; i < n_descs; i++) {
+ struct nvme_copy_desc *desc = &descs[i];
+ __u64 slba = cpu_to_le64(desc->slba);
+ __u64 len = (__u64)cpu_to_le16(desc->length) + 1;
+ void *saddr, *daddr;
+
+ if (unlikely(slba + len < slba) || unlikely(slba + len > ns->n_sectors) ||
+ unlikely(dlba + len < dlba) || unlikely(dlba + len > ns->n_sectors)) {
+ ret = BLK_STS_NOTSUPP;
+ goto free_ret;
+ }
+
+ saddr = ns->space + (slba << ns->sector_size_bits);
+ daddr = ns->space + (dlba << ns->sector_size_bits);
+
+ memcpy(daddr, saddr, len << ns->sector_size_bits);
+
+ dlba += len;
+ }
+
+ ret = BLK_STS_OK;
+
+free_ret:
+ kfree(descs);
+
+ blk_mq_end_request(req, ret);
+}
+
+static void nvme_debug_io_rq(struct work_struct *w)
+{
+ struct nvme_debug_request *ndr = container_of(w, struct nvme_debug_request, work);
+ struct request *req = (struct request *)ndr - 1;
+ struct nvme_debug_ctrl *ctrl = to_debug_ctrl(ndr->req.ctrl);
+ __u32 nsid = le32_to_cpu(ndr->cmd.common.nsid);
+ struct nvme_debug_namespace *ns;
+
+ percpu_down_read(&nvme_debug_sem);
+ ns = nvme_debug_find_namespace(ctrl, nsid);
+ if (unlikely(!ns))
+ goto ret_notsupp;
+
+ switch (ndr->cmd.common.opcode) {
+ case nvme_cmd_flush: {
+ blk_mq_end_request(req, BLK_STS_OK);
+ goto ret;
+ }
+ case nvme_cmd_read:
+ case nvme_cmd_write: {
+ nvme_debug_rw(ns, req);
+ goto ret;
+ }
+ case nvme_cmd_copy: {
+ nvme_debug_copy(ns, req);
+ goto ret;
+ }
+ default: {
+ printk("nvme_debug_io_rq: %x\n", ndr->cmd.common.opcode);
+ break;
+ }
+ }
+ret_notsupp:
+ blk_mq_end_request(req, BLK_STS_NOTSUPP);
+ret:
+ percpu_up_read(&nvme_debug_sem);
+}
+
+static blk_status_t nvme_debug_queue_rq(struct blk_mq_hw_ctx *hctx, const struct blk_mq_queue_data *bd)
+{
+ struct request *req = bd->rq;
+ struct nvme_debug_request *ndr = blk_mq_rq_to_pdu(req);
+ struct nvme_debug_ctrl *ctrl = to_debug_ctrl(ndr->req.ctrl);
+ struct nvme_ns *ns = hctx->queue->queuedata;
+ blk_status_t r;
+
+ r = nvme_setup_cmd(ns, req);
+ if (unlikely(r))
+ return r;
+
+ if (!ns) {
+ INIT_WORK(&ndr->work, nvme_debug_admin_rq);
+ queue_work(ctrl->admin_wq, &ndr->work);
+ return BLK_STS_OK;
+ } else if (unlikely((req->cmd_flags & REQ_OP_MASK) == REQ_OP_COPY_READ_TOKEN)) {
+ blk_mq_end_request(req, BLK_STS_OK);
+ return BLK_STS_OK;
+ } else {
+ INIT_WORK(&ndr->work, nvme_debug_io_rq);
+ queue_work(ctrl->io_wq, &ndr->work);
+ return BLK_STS_OK;
+ }
+}
+
+static int nvme_debug_init_request(struct blk_mq_tag_set *set, struct request *req, unsigned hctx_idx, unsigned numa_node)
+{
+ struct nvme_debug_ctrl *ctrl = set->driver_data;
+ struct nvme_debug_request *ndr = blk_mq_rq_to_pdu(req);
+ nvme_req(req)->ctrl = &ctrl->ctrl;
+ nvme_req(req)->cmd = &ndr->cmd;
+ return 0;
+}
+
+static int nvme_debug_init_hctx(struct blk_mq_hw_ctx *hctx, void *data, unsigned hctx_idx)
+{
+ struct nvme_debug_ctrl *ctrl = data;
+ hctx->driver_data = ctrl;
+ return 0;
+}
+
+static const struct blk_mq_ops nvme_debug_mq_ops = {
+ .queue_rq = nvme_debug_queue_rq,
+ .init_request = nvme_debug_init_request,
+ .init_hctx = nvme_debug_init_hctx,
+};
+
+static int nvme_debug_configure_admin_queue(struct nvme_debug_ctrl *ctrl)
+{
+ int r;
+
+ memset(&ctrl->admin_tag_set, 0, sizeof(ctrl->admin_tag_set));
+ ctrl->admin_tag_set.ops = &nvme_debug_mq_ops;
+ ctrl->admin_tag_set.queue_depth = NVME_AQ_MQ_TAG_DEPTH;
+ ctrl->admin_tag_set.reserved_tags = NVMF_RESERVED_TAGS;
+ ctrl->admin_tag_set.numa_node = ctrl->ctrl.numa_node;
+ ctrl->admin_tag_set.cmd_size = sizeof(struct nvme_debug_request);
+ ctrl->admin_tag_set.driver_data = ctrl;
+ ctrl->admin_tag_set.nr_hw_queues = 1;
+ ctrl->admin_tag_set.timeout = NVME_ADMIN_TIMEOUT;
+ ctrl->admin_tag_set.flags = BLK_MQ_F_NO_SCHED;
+
+ r = blk_mq_alloc_tag_set(&ctrl->admin_tag_set);
+ if (r)
+ goto ret0;
+ ctrl->ctrl.admin_tagset = &ctrl->admin_tag_set;
+
+ ctrl->ctrl.admin_q = blk_mq_init_queue(&ctrl->admin_tag_set);
+ if (IS_ERR(ctrl->ctrl.admin_q)) {
+ r = PTR_ERR(ctrl->ctrl.admin_q);
+ goto ret1;
+ }
+
+ r = nvme_enable_ctrl(&ctrl->ctrl);
+ if (r)
+ goto ret2;
+
+ nvme_start_admin_queue(&ctrl->ctrl);
+
+ r = nvme_init_ctrl_finish(&ctrl->ctrl);
+ if (r)
+ goto ret3;
+
+ return 0;
+
+ret3:
+ nvme_stop_admin_queue(&ctrl->ctrl);
+ blk_sync_queue(ctrl->ctrl.admin_q);
+ret2:
+ blk_cleanup_queue(ctrl->ctrl.admin_q);
+ret1:
+ blk_mq_free_tag_set(&ctrl->admin_tag_set);
+ret0:
+ return r;
+}
+
+static int nvme_debug_configure_io_queue(struct nvme_debug_ctrl *ctrl)
+{
+ int r;
+
+ memset(&ctrl->io_tag_set, 0, sizeof(ctrl->io_tag_set));
+ ctrl->io_tag_set.ops = &nvme_debug_mq_ops;
+ ctrl->io_tag_set.queue_depth = NVME_AQ_MQ_TAG_DEPTH;
+ ctrl->io_tag_set.reserved_tags = NVMF_RESERVED_TAGS;
+ ctrl->io_tag_set.numa_node = ctrl->ctrl.numa_node;
+ ctrl->io_tag_set.cmd_size = sizeof(struct nvme_debug_request);
+ ctrl->io_tag_set.driver_data = ctrl;
+ ctrl->io_tag_set.nr_hw_queues = 1;
+ ctrl->io_tag_set.timeout = NVME_ADMIN_TIMEOUT;
+ ctrl->io_tag_set.flags = BLK_MQ_F_NO_SCHED;
+
+ r = blk_mq_alloc_tag_set(&ctrl->io_tag_set);
+ if (r)
+ goto ret0;
+ ctrl->ctrl.tagset = &ctrl->io_tag_set;
+ return 0;
+
+ret0:
+ return r;
+}
+
+static const struct nvme_ctrl_ops nvme_debug_ctrl_ops = {
+ .name = "debug",
+ .module = THIS_MODULE,
+ .flags = NVME_F_FABRICS,
+ .reg_read32 = nvme_debug_reg_read32,
+ .reg_read64 = nvme_debug_reg_read64,
+ .reg_write32 = nvme_debug_reg_write32,
+ .free_ctrl = nvme_debug_free_ctrl,
+ .submit_async_event = nvme_debug_submit_async_event,
+ .delete_ctrl = nvme_debug_delete_ctrl,
+ .get_address = nvme_debug_get_address,
+};
+
+static struct nvme_ctrl *nvme_debug_create_ctrl(struct device *dev,
+ struct nvmf_ctrl_options *opts)
+{
+ int r;
+ struct nvme_debug_ctrl *ctrl;
+
+ ctrl = kzalloc(sizeof(struct nvme_debug_ctrl), GFP_KERNEL);
+ if (!ctrl) {
+ r = -ENOMEM;
+ goto ret0;
+ }
+
+ INIT_LIST_HEAD(&ctrl->list);
+ INIT_LIST_HEAD(&ctrl->namespaces);
+ ctrl->ctrl.opts = opts;
+ ctrl->ctrl.queue_count = 2;
+ INIT_WORK(&ctrl->ctrl.reset_work, nvme_debug_reset_ctrl_work);
+
+ ctrl->admin_wq = alloc_workqueue("nvme-debug-admin", WQ_MEM_RECLAIM | WQ_UNBOUND, 1);
+ if (!ctrl->admin_wq)
+ goto ret1;
+
+ ctrl->io_wq = alloc_workqueue("nvme-debug-io", WQ_MEM_RECLAIM, 0);
+ if (!ctrl->io_wq)
+ goto ret1;
+
+ if (!nvme_debug_alloc_namespace(ctrl)) {
+ r = -ENOMEM;
+ goto ret1;
+ }
+
+ r = nvme_init_ctrl(&ctrl->ctrl, dev, &nvme_debug_ctrl_ops, 0);
+ if (r)
+ goto ret1;
+
+ if (!nvme_change_ctrl_state(&ctrl->ctrl, NVME_CTRL_CONNECTING))
+ goto ret2;
+
+ r = nvme_debug_configure_admin_queue(ctrl);
+ if (r)
+ goto ret2;
+
+ r = nvme_debug_configure_io_queue(ctrl);
+ if (r)
+ goto ret2;
+
+ if (!nvme_change_ctrl_state(&ctrl->ctrl, NVME_CTRL_LIVE))
+ goto ret2;
+
+ nvme_start_ctrl(&ctrl->ctrl);
+
+ mutex_lock(&nvme_debug_ctrl_mutex);
+ list_add_tail(&ctrl->list, &nvme_debug_ctrl_list);
+ mutex_unlock(&nvme_debug_ctrl_mutex);
+
+ return &ctrl->ctrl;
+
+ret2:
+ nvme_uninit_ctrl(&ctrl->ctrl);
+ nvme_put_ctrl(&ctrl->ctrl);
+ return ERR_PTR(r);
+ret1:
+ nvme_debug_free_namespaces(ctrl);
+ if (ctrl->admin_wq)
+ destroy_workqueue(ctrl->admin_wq);
+ if (ctrl->io_wq)
+ destroy_workqueue(ctrl->io_wq);
+ kfree(ctrl);
+ret0:
+ return ERR_PTR(r);
+}
+
+static struct nvmf_transport_ops nvme_debug_transport = {
+ .name = "debug",
+ .module = THIS_MODULE,
+ .required_opts = NVMF_OPT_TRADDR,
+ .allowed_opts = NVMF_OPT_CTRL_LOSS_TMO,
+ .create_ctrl = nvme_debug_create_ctrl,
+};
+
+static int __init nvme_debug_init_module(void)
+{
+ nvmf_register_transport(&nvme_debug_transport);
+ return 0;
+}
+
+static void __exit nvme_debug_cleanup_module(void)
+{
+ struct nvme_debug_ctrl *ctrl;
+
+ nvmf_unregister_transport(&nvme_debug_transport);
+
+ mutex_lock(&nvme_debug_ctrl_mutex);
+ list_for_each_entry(ctrl, &nvme_debug_ctrl_list, list) {
+ nvme_delete_ctrl(&ctrl->ctrl);
+ }
+ mutex_unlock(&nvme_debug_ctrl_mutex);
+ flush_workqueue(nvme_delete_wq);
+}
+
+module_init(nvme_debug_init_module);
+module_exit(nvme_debug_cleanup_module);
+
+MODULE_LICENSE("GPL v2");
--
dm-devel mailing list
dm-devel@redhat.com
https://listman.redhat.com/mailman/listinfo/dm-devel
^ permalink raw reply [flat|nested] 272+ messages in thread* Re: [RFC PATCH 3/3] nvme: add the "debug" host driver
2022-02-01 18:33 ` [dm-devel] " Mikulas Patocka
(?)
@ 2022-02-01 21:32 ` kernel test robot
-1 siblings, 0 replies; 272+ messages in thread
From: kernel test robot @ 2022-02-01 21:32 UTC (permalink / raw)
To: kbuild-all
[-- Attachment #1: Type: text/plain, Size: 6417 bytes --]
Hi Mikulas,
[FYI, it's a private test report for your RFC patch.]
[auto build test ERROR on axboe-block/for-next]
[also build test ERROR on linus/master v5.17-rc2 next-20220201]
[cannot apply to linux-nvme/for-next]
[If your patch is applied to the wrong git tree, kindly drop us a note.
And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch]
url: https://github.com/0day-ci/linux/commits/Mikulas-Patocka/block-add-copy-offload-support/20220202-033318
base: https://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux-block.git for-next
config: alpha-allmodconfig (https://download.01.org/0day-ci/archive/20220202/202202020535.upnRkg5V-lkp(a)intel.com/config)
compiler: alpha-linux-gcc (GCC) 11.2.0
reproduce (this is a W=1 build):
wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
chmod +x ~/bin/make.cross
# https://github.com/0day-ci/linux/commit/b59e9d971770c50aaac1d07d6edaa10a4a47171b
git remote add linux-review https://github.com/0day-ci/linux
git fetch --no-tags linux-review Mikulas-Patocka/block-add-copy-offload-support/20220202-033318
git checkout b59e9d971770c50aaac1d07d6edaa10a4a47171b
# save the config file to linux build tree
mkdir build_dir
COMPILER_INSTALL_PATH=$HOME/0day COMPILER=gcc-11.2.0 make.cross O=build_dir ARCH=alpha SHELL=/bin/bash drivers/nvme/
If you fix the issue, kindly add following tag as appropriate
Reported-by: kernel test robot <lkp@intel.com>
All error/warnings (new ones prefixed by >>):
drivers/nvme/host/nvme-debug.c: In function 'nvme_debug_alloc_namespace':
>> drivers/nvme/host/nvme-debug.c:98:21: error: implicit declaration of function 'vzalloc'; did you mean 'kvzalloc'? [-Werror=implicit-function-declaration]
98 | ns->space = vzalloc(ns->n_sectors << ns->sector_size_bits);
| ^~~~~~~
| kvzalloc
>> drivers/nvme/host/nvme-debug.c:98:19: warning: assignment to 'void *' from 'int' makes pointer from integer without a cast [-Wint-conversion]
98 | ns->space = vzalloc(ns->n_sectors << ns->sector_size_bits);
| ^
drivers/nvme/host/nvme-debug.c: In function 'nvme_debug_free_namespace':
>> drivers/nvme/host/nvme-debug.c:115:9: error: implicit declaration of function 'vfree'; did you mean 'kvfree'? [-Werror=implicit-function-declaration]
115 | vfree(ns->space);
| ^~~~~
| kvfree
drivers/nvme/host/nvme-debug.c: At top level:
>> drivers/nvme/host/nvme-debug.c:148:5: warning: no previous prototype for 'nvme_debug_reg_read64' [-Wmissing-prototypes]
148 | int nvme_debug_reg_read64(struct nvme_ctrl *nctrl, u32 off, u64 *val)
| ^~~~~~~~~~~~~~~~~~~~~
>> drivers/nvme/host/nvme-debug.c:163:5: warning: no previous prototype for 'nvme_debug_reg_write32' [-Wmissing-prototypes]
163 | int nvme_debug_reg_write32(struct nvme_ctrl *nctrl, u32 off, u32 val)
| ^~~~~~~~~~~~~~~~~~~~~~
cc1: some warnings being treated as errors
vim +98 drivers/nvme/host/nvme-debug.c
71
72 static bool nvme_debug_alloc_namespace(struct nvme_debug_ctrl *ctrl)
73 {
74 struct nvme_debug_namespace *ns;
75 unsigned s;
76 size_t dsm;
77
78 ns = kmalloc(sizeof(struct nvme_debug_namespace), GFP_KERNEL);
79 if (!ns)
80 goto fail0;
81
82 ns->nsid = 1;
83 while (nvme_debug_find_namespace(ctrl, ns->nsid))
84 ns->nsid++;
85
86 s = READ_ONCE(sector_size);
87 if (s < 512 || s > PAGE_SIZE || !is_power_of_2(s))
88 goto fail1;
89 ns->sector_size_bits = __ffs(s);
90 dsm = READ_ONCE(dev_size_mb);
91 ns->n_sectors = dsm << (20 - ns->sector_size_bits);
92 if (ns->n_sectors >> (20 - ns->sector_size_bits) != dsm)
93 goto fail1;
94
95 if (ns->n_sectors << ns->sector_size_bits >> ns->sector_size_bits != ns->n_sectors)
96 goto fail1;
97
> 98 ns->space = vzalloc(ns->n_sectors << ns->sector_size_bits);
99 if (!ns->space)
100 goto fail1;
101
102 generate_random_uuid(ns->uuid);
103
104 list_add(&ns->list, &ctrl->namespaces);
105 return true;
106
107 fail1:
108 kfree(ns);
109 fail0:
110 return false;
111 }
112
113 static void nvme_debug_free_namespace(struct nvme_debug_namespace *ns)
114 {
> 115 vfree(ns->space);
116 list_del(&ns->list);
117 kfree(ns);
118 }
119
120 static int nvme_debug_reg_read32(struct nvme_ctrl *nctrl, u32 off, u32 *val)
121 {
122 struct nvme_debug_ctrl *ctrl = to_debug_ctrl(nctrl);
123 switch (off) {
124 case NVME_REG_VS: {
125 *val = 0x20000;
126 break;
127 }
128 case NVME_REG_CC: {
129 *val = ctrl->reg_cc;
130 break;
131 }
132 case NVME_REG_CSTS: {
133 *val = 0;
134 if (ctrl->reg_cc & NVME_CC_ENABLE)
135 *val |= NVME_CSTS_RDY;
136 if (ctrl->reg_cc & NVME_CC_SHN_MASK)
137 *val |= NVME_CSTS_SHST_CMPLT;
138 break;
139 }
140 default: {
141 printk("nvme_debug_reg_read32: %x\n", off);
142 return -ENOSYS;
143 }
144 }
145 return 0;
146 }
147
> 148 int nvme_debug_reg_read64(struct nvme_ctrl *nctrl, u32 off, u64 *val)
149 {
150 switch (off) {
151 case NVME_REG_CAP: {
152 *val = (1ULL << 0) | (1ULL << 37);
153 break;
154 }
155 default: {
156 printk("nvme_debug_reg_read64: %x\n", off);
157 return -ENOSYS;
158 }
159 }
160 return 0;
161 }
162
> 163 int nvme_debug_reg_write32(struct nvme_ctrl *nctrl, u32 off, u32 val)
164 {
165 struct nvme_debug_ctrl *ctrl = to_debug_ctrl(nctrl);
166 switch (off) {
167 case NVME_REG_CC: {
168 ctrl->reg_cc = val;
169 break;
170 }
171 default: {
172 printk("nvme_debug_reg_write32: %x, %x\n", off, val);
173 return -ENOSYS;
174 }
175 }
176 return 0;
177 }
178
---
0-DAY CI Kernel Test Service, Intel Corporation
https://lists.01.org/hyperkitty/list/kbuild-all(a)lists.01.org
^ permalink raw reply [flat|nested] 272+ messages in thread* Re: [RFC PATCH 3/3] nvme: add the "debug" host driver
2022-02-01 18:33 ` [dm-devel] " Mikulas Patocka
@ 2022-02-02 6:01 ` Adam Manzanares
-1 siblings, 0 replies; 272+ messages in thread
From: Adam Manzanares @ 2022-02-02 6:01 UTC (permalink / raw)
To: Mikulas Patocka
Cc: Javier González, Chaitanya Kulkarni, linux-block,
linux-scsi, dm-devel, linux-nvme, linux-fsdevel, Jens Axboe,
msnitzer@redhat.com >> msnitzer@redhat.com,
Bart Van Assche,
martin.petersen@oracle.com >> Martin K. Petersen, roland,
Hannes Reinecke, kbus @imap.gmail.com>> Keith Busch,
Christoph Hellwig, Frederick.Knight, zach.brown, osandov, lsf-pc,
djwong, josef, clm, dsterba, tytso, jack, Kanchan Joshi
On Tue, Feb 01, 2022 at 01:33:47PM -0500, Mikulas Patocka wrote:
> This patch adds a new driver "nvme-debug". It uses memory as a backing
> store and it is used to test the copy offload functionality.
>
We have looked at something similar to create a null nvme driver to test
interfaces poking the nvme driver without using the block layer. Have you
considered implementing this in the fabrics code since it is already virtualizng
a ssd controller?
BTW I think having the target code be able to implement simple copy without
moving data over the fabric would be a great way of showing off the command.
> Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
>
> ---
> drivers/nvme/host/Kconfig | 13
> drivers/nvme/host/Makefile | 1
> drivers/nvme/host/nvme-debug.c | 838 +++++++++++++++++++++++++++++++++++++++++
> 3 files changed, 852 insertions(+)
>
> Index: linux-2.6/drivers/nvme/host/Kconfig
> ===================================================================
> --- linux-2.6.orig/drivers/nvme/host/Kconfig 2022-02-01 18:34:22.000000000 +0100
> +++ linux-2.6/drivers/nvme/host/Kconfig 2022-02-01 18:34:22.000000000 +0100
> @@ -83,3 +83,16 @@ config NVME_TCP
> from https://urldefense.com/v3/__https://protect2.fireeye.com/v1/url?k=26ebb71c-79708e5a-26ea3c53-0cc47a3003e8-a628bd4c53dd84d1&q=1&e=9f16193b-4232-4453-9889-7cdf5d653922&u=https*3A*2F*2Fgithub.com*2Flinux-nvme*2Fnvme-cli__;JSUlJSU!!EwVzqGoTKBqv-0DWAJBm!HyJHAJgOq3M4SIOA0HvhX95q50ACkRtsiHWmAQERqjGLQ0pLb_Jru8QcwOQyix0tTVJA$ .
>
> If unsure, say N.
> +
> +config NVME_DEBUG
> + tristate "NVM Express debug"
> + depends on INET
> + depends on BLOCK
> + select NVME_CORE
> + select NVME_FABRICS
> + select CRYPTO
> + select CRYPTO_CRC32C
> + help
> + This pseudo driver simulates a NVMe adapter.
> +
> + If unsure, say N.
> Index: linux-2.6/drivers/nvme/host/Makefile
> ===================================================================
> --- linux-2.6.orig/drivers/nvme/host/Makefile 2022-02-01 18:34:22.000000000 +0100
> +++ linux-2.6/drivers/nvme/host/Makefile 2022-02-01 18:34:22.000000000 +0100
> @@ -8,6 +8,7 @@ obj-$(CONFIG_NVME_FABRICS) += nvme-fabr
> obj-$(CONFIG_NVME_RDMA) += nvme-rdma.o
> obj-$(CONFIG_NVME_FC) += nvme-fc.o
> obj-$(CONFIG_NVME_TCP) += nvme-tcp.o
> +obj-$(CONFIG_NVME_DEBUG) += nvme-debug.o
>
> nvme-core-y := core.o ioctl.o
> nvme-core-$(CONFIG_TRACING) += trace.o
> Index: linux-2.6/drivers/nvme/host/nvme-debug.c
> ===================================================================
> --- /dev/null 1970-01-01 00:00:00.000000000 +0000
> +++ linux-2.6/drivers/nvme/host/nvme-debug.c 2022-02-01 18:34:22.000000000 +0100
> @@ -0,0 +1,838 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * NVMe debug
> + */
> +
> +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
> +#include <linux/module.h>
> +#include <linux/init.h>
> +#include <linux/slab.h>
> +#include <linux/err.h>
> +#include <linux/blk-mq.h>
> +#include <linux/sort.h>
> +#include <linux/version.h>
> +
> +#include "nvme.h"
> +#include "fabrics.h"
> +
> +static ulong dev_size_mb = 16;
> +module_param_named(dev_size_mb, dev_size_mb, ulong, S_IRUGO | S_IWUSR);
> +MODULE_PARM_DESC(dev_size_mb, "size in MiB of the namespace(def=8)");
> +
> +static unsigned sector_size = 512;
> +module_param_named(sector_size, sector_size, uint, S_IRUGO | S_IWUSR);
> +MODULE_PARM_DESC(sector_size, "logical block size in bytes (def=512)");
> +
> +struct nvme_debug_ctrl {
> + struct nvme_ctrl ctrl;
> + uint32_t reg_cc;
> + struct blk_mq_tag_set admin_tag_set;
> + struct blk_mq_tag_set io_tag_set;
> + struct workqueue_struct *admin_wq;
> + struct workqueue_struct *io_wq;
> + struct list_head namespaces;
> + struct list_head list;
> +};
> +
> +struct nvme_debug_namespace {
> + struct list_head list;
> + uint32_t nsid;
> + unsigned char sector_size_bits;
> + size_t n_sectors;
> + void *space;
> + char uuid[16];
> +};
> +
> +struct nvme_debug_request {
> + struct nvme_request req;
> + struct nvme_command cmd;
> + struct work_struct work;
> +};
> +
> +static LIST_HEAD(nvme_debug_ctrl_list);
> +static DEFINE_MUTEX(nvme_debug_ctrl_mutex);
> +
> +DEFINE_STATIC_PERCPU_RWSEM(nvme_debug_sem);
> +
> +static inline struct nvme_debug_ctrl *to_debug_ctrl(struct nvme_ctrl *nctrl)
> +{
> + return container_of(nctrl, struct nvme_debug_ctrl, ctrl);
> +}
> +
> +static struct nvme_debug_namespace *nvme_debug_find_namespace(struct nvme_debug_ctrl *ctrl, unsigned nsid)
> +{
> + struct nvme_debug_namespace *ns;
> + list_for_each_entry(ns, &ctrl->namespaces, list) {
> + if (ns->nsid == nsid)
> + return ns;
> + }
> + return NULL;
> +}
> +
> +static bool nvme_debug_alloc_namespace(struct nvme_debug_ctrl *ctrl)
> +{
> + struct nvme_debug_namespace *ns;
> + unsigned s;
> + size_t dsm;
> +
> + ns = kmalloc(sizeof(struct nvme_debug_namespace), GFP_KERNEL);
> + if (!ns)
> + goto fail0;
> +
> + ns->nsid = 1;
> + while (nvme_debug_find_namespace(ctrl, ns->nsid))
> + ns->nsid++;
> +
> + s = READ_ONCE(sector_size);
> + if (s < 512 || s > PAGE_SIZE || !is_power_of_2(s))
> + goto fail1;
> + ns->sector_size_bits = __ffs(s);
> + dsm = READ_ONCE(dev_size_mb);
> + ns->n_sectors = dsm << (20 - ns->sector_size_bits);
> + if (ns->n_sectors >> (20 - ns->sector_size_bits) != dsm)
> + goto fail1;
> +
> + if (ns->n_sectors << ns->sector_size_bits >> ns->sector_size_bits != ns->n_sectors)
> + goto fail1;
> +
> + ns->space = vzalloc(ns->n_sectors << ns->sector_size_bits);
> + if (!ns->space)
> + goto fail1;
> +
> + generate_random_uuid(ns->uuid);
> +
> + list_add(&ns->list, &ctrl->namespaces);
> + return true;
> +
> +fail1:
> + kfree(ns);
> +fail0:
> + return false;
> +}
> +
> +static void nvme_debug_free_namespace(struct nvme_debug_namespace *ns)
> +{
> + vfree(ns->space);
> + list_del(&ns->list);
> + kfree(ns);
> +}
> +
> +static int nvme_debug_reg_read32(struct nvme_ctrl *nctrl, u32 off, u32 *val)
> +{
> + struct nvme_debug_ctrl *ctrl = to_debug_ctrl(nctrl);
> + switch (off) {
> + case NVME_REG_VS: {
> + *val = 0x20000;
> + break;
> + }
> + case NVME_REG_CC: {
> + *val = ctrl->reg_cc;
> + break;
> + }
> + case NVME_REG_CSTS: {
> + *val = 0;
> + if (ctrl->reg_cc & NVME_CC_ENABLE)
> + *val |= NVME_CSTS_RDY;
> + if (ctrl->reg_cc & NVME_CC_SHN_MASK)
> + *val |= NVME_CSTS_SHST_CMPLT;
> + break;
> + }
> + default: {
> + printk("nvme_debug_reg_read32: %x\n", off);
> + return -ENOSYS;
> + }
> + }
> + return 0;
> +}
> +
> +int nvme_debug_reg_read64(struct nvme_ctrl *nctrl, u32 off, u64 *val)
> +{
> + switch (off) {
> + case NVME_REG_CAP: {
> + *val = (1ULL << 0) | (1ULL << 37);
> + break;
> + }
> + default: {
> + printk("nvme_debug_reg_read64: %x\n", off);
> + return -ENOSYS;
> + }
> + }
> + return 0;
> +}
> +
> +int nvme_debug_reg_write32(struct nvme_ctrl *nctrl, u32 off, u32 val)
> +{
> + struct nvme_debug_ctrl *ctrl = to_debug_ctrl(nctrl);
> + switch (off) {
> + case NVME_REG_CC: {
> + ctrl->reg_cc = val;
> + break;
> + }
> + default: {
> + printk("nvme_debug_reg_write32: %x, %x\n", off, val);
> + return -ENOSYS;
> + }
> + }
> + return 0;
> +}
> +
> +static void nvme_debug_submit_async_event(struct nvme_ctrl *nctrl)
> +{
> + printk("nvme_debug_submit_async_event\n");
> +}
> +
> +static void nvme_debug_delete_ctrl(struct nvme_ctrl *nctrl)
> +{
> + nvme_shutdown_ctrl(nctrl);
> +}
> +
> +static void nvme_debug_free_namespaces(struct nvme_debug_ctrl *ctrl)
> +{
> + if (!list_empty(&ctrl->namespaces)) {
> + struct nvme_debug_namespace *ns = container_of(ctrl->namespaces.next, struct nvme_debug_namespace, list);
> + nvme_debug_free_namespace(ns);
> + }
> +}
> +
> +static void nvme_debug_free_ctrl(struct nvme_ctrl *nctrl)
> +{
> + struct nvme_debug_ctrl *ctrl = to_debug_ctrl(nctrl);
> +
> + flush_workqueue(ctrl->admin_wq);
> + flush_workqueue(ctrl->io_wq);
> +
> + nvme_debug_free_namespaces(ctrl);
> +
> + if (list_empty(&ctrl->list))
> + goto free_ctrl;
> +
> + mutex_lock(&nvme_debug_ctrl_mutex);
> + list_del(&ctrl->list);
> + mutex_unlock(&nvme_debug_ctrl_mutex);
> +
> + nvmf_free_options(nctrl->opts);
> +free_ctrl:
> + destroy_workqueue(ctrl->admin_wq);
> + destroy_workqueue(ctrl->io_wq);
> + kfree(ctrl);
> +}
> +
> +static int nvme_debug_get_address(struct nvme_ctrl *nctrl, char *buf, int size)
> +{
> + int len = 0;
> + len += snprintf(buf, size, "debug");
> + return len;
> +}
> +
> +static void nvme_debug_reset_ctrl_work(struct work_struct *work)
> +{
> + printk("nvme_reset_ctrl_work\n");
> +}
> +
> +static void copy_data_request(struct request *req, void *data, size_t size, bool to_req)
> +{
> + if (req->rq_flags & RQF_SPECIAL_PAYLOAD) {
> + void *addr;
> + struct bio_vec bv = req->special_vec;
> + addr = kmap_atomic(bv.bv_page);
> + if (to_req) {
> + memcpy(addr + bv.bv_offset, data, bv.bv_len);
> + flush_dcache_page(bv.bv_page);
> + } else {
> + flush_dcache_page(bv.bv_page);
> + memcpy(data, addr + bv.bv_offset, bv.bv_len);
> + }
> + kunmap_atomic(addr);
> + data += bv.bv_len;
> + size -= bv.bv_len;
> + } else {
> + struct req_iterator bi;
> + struct bio_vec bv;
> + rq_for_each_segment(bv, req, bi) {
> + void *addr;
> + addr = kmap_atomic(bv.bv_page);
> + if (to_req) {
> + memcpy(addr + bv.bv_offset, data, bv.bv_len);
> + flush_dcache_page(bv.bv_page);
> + } else {
> + flush_dcache_page(bv.bv_page);
> + memcpy(data, addr + bv.bv_offset, bv.bv_len);
> + }
> + kunmap_atomic(addr);
> + data += bv.bv_len;
> + size -= bv.bv_len;
> + }
> + }
> + if (size)
> + printk("size mismatch: %lx\n", (unsigned long)size);
> +}
> +
> +static void nvme_debug_identify_ns(struct nvme_debug_ctrl *ctrl, struct request *req)
> +{
> + struct nvme_id_ns *id;
> + struct nvme_debug_namespace *ns;
> + struct nvme_debug_request *ndr = blk_mq_rq_to_pdu(req);
> +
> + id = kzalloc(sizeof(struct nvme_id_ns), GFP_NOIO);
> + if (!id) {
> + blk_mq_end_request(req, BLK_STS_RESOURCE);
> + return;
> + }
> +
> + ns = nvme_debug_find_namespace(ctrl, le32_to_cpu(ndr->cmd.identify.nsid));
> + if (!ns) {
> + nvme_req(req)->status = cpu_to_le16(NVME_SC_INVALID_NS);
> + goto free_ret;
> + }
> +
> + id->nsze = cpu_to_le64(ns->n_sectors);
> + id->ncap = id->nsze;
> + id->nuse = id->nsze;
> + /*id->nlbaf = 0;*/
> + id->dlfeat = 0x01;
> + id->lbaf[0].ds = ns->sector_size_bits;
> +
> + copy_data_request(req, id, sizeof(struct nvme_id_ns), true);
> +
> +free_ret:
> + kfree(id);
> + blk_mq_end_request(req, BLK_STS_OK);
> +}
> +
> +static void nvme_debug_identify_ctrl(struct nvme_debug_ctrl *ctrl, struct request *req)
> +{
> + struct nvme_debug_namespace *ns;
> + struct nvme_id_ctrl *id;
> + char ver[9];
> + size_t ver_len;
> +
> + id = kzalloc(sizeof(struct nvme_id_ctrl), GFP_NOIO);
> + if (!id) {
> + blk_mq_end_request(req, BLK_STS_RESOURCE);
> + return;
> + }
> +
> + id->vid = cpu_to_le16(PCI_VENDOR_ID_REDHAT);
> + id->ssvid = cpu_to_le16(PCI_VENDOR_ID_REDHAT);
> + memset(id->sn, ' ', sizeof id->sn);
> + memset(id->mn, ' ', sizeof id->mn);
> + memcpy(id->mn, "nvme-debug", 10);
> + snprintf(ver, sizeof ver, "%X", LINUX_VERSION_CODE);
> + ver_len = min(strlen(ver), sizeof id->fr);
> + memset(id->fr, ' ', sizeof id->fr);
> + memcpy(id->fr, ver, ver_len);
> + memcpy(id->ieee, "\xe9\xf2\x40", sizeof id->ieee);
> + id->ver = cpu_to_le32(0x20000);
> + id->kas = cpu_to_le16(100);
> + id->sqes = 0x66;
> + id->cqes = 0x44;
> + id->maxcmd = cpu_to_le16(1);
> + mutex_lock(&nvme_debug_ctrl_mutex);
> + list_for_each_entry(ns, &ctrl->namespaces, list) {
> + if (ns->nsid > le32_to_cpu(id->nn))
> + id->nn = cpu_to_le32(ns->nsid);
> + }
> + mutex_unlock(&nvme_debug_ctrl_mutex);
> + id->oncs = cpu_to_le16(NVME_CTRL_ONCS_COPY);
> + id->vwc = 0x6;
> + id->mnan = cpu_to_le32(0xffffffff);
> + strcpy(id->subnqn, "nqn.2021-09.com.redhat:nvme-debug");
> + id->ioccsz = cpu_to_le32(4);
> + id->iorcsz = cpu_to_le32(1);
> +
> + copy_data_request(req, id, sizeof(struct nvme_id_ctrl), true);
> +
> + kfree(id);
> + blk_mq_end_request(req, BLK_STS_OK);
> +}
> +
> +static int cmp_ns(const void *a1, const void *a2)
> +{
> + __u32 v1 = le32_to_cpu(*(__u32 *)a1);
> + __u32 v2 = le32_to_cpu(*(__u32 *)a2);
> + if (!v1)
> + v1 = 0xffffffffU;
> + if (!v2)
> + v2 = 0xffffffffU;
> + if (v1 < v2)
> + return -1;
> + if (v1 > v2)
> + return 1;
> + return 0;
> +}
> +
> +static void nvme_debug_identify_active_ns(struct nvme_debug_ctrl *ctrl, struct request *req)
> +{
> + struct nvme_debug_namespace *ns;
> + struct nvme_debug_request *ndr = blk_mq_rq_to_pdu(req);
> + unsigned size;
> + __u32 *id;
> + unsigned idp;
> +
> + if (le32_to_cpu(ndr->cmd.identify.nsid) >= 0xFFFFFFFE) {
> + nvme_req(req)->status = cpu_to_le16(NVME_SC_INVALID_NS);
> + blk_mq_end_request(req, BLK_STS_OK);
> + return;
> + }
> +
> + mutex_lock(&nvme_debug_ctrl_mutex);
> + size = 0;
> + list_for_each_entry(ns, &ctrl->namespaces, list) {
> + size++;
> + }
> + size = min(size, 1024U);
> +
> + id = kzalloc(sizeof(__u32) * size, GFP_NOIO);
> + if (!id) {
> + mutex_unlock(&nvme_debug_ctrl_mutex);
> + blk_mq_end_request(req, BLK_STS_RESOURCE);
> + return;
> + }
> +
> + idp = 0;
> + list_for_each_entry(ns, &ctrl->namespaces, list) {
> + if (ns->nsid > le32_to_cpu(ndr->cmd.identify.nsid))
> + id[idp++] = cpu_to_le32(ns->nsid);
> + }
> + mutex_unlock(&nvme_debug_ctrl_mutex);
> + sort(id, idp, sizeof(__u32), cmp_ns, NULL);
> +
> + copy_data_request(req, id, sizeof(__u32) * 1024, true);
> +
> + kfree(id);
> + blk_mq_end_request(req, BLK_STS_OK);
> +}
> +
> +static void nvme_debug_identify_ns_desc_list(struct nvme_debug_ctrl *ctrl, struct request *req)
> +{
> + struct nvme_ns_id_desc *id;
> + struct nvme_debug_namespace *ns;
> + struct nvme_debug_request *ndr = blk_mq_rq_to_pdu(req);
> + id = kzalloc(4096, GFP_NOIO);
> + if (!id) {
> + blk_mq_end_request(req, BLK_STS_RESOURCE);
> + return;
> + }
> +
> + ns = nvme_debug_find_namespace(ctrl, le32_to_cpu(ndr->cmd.identify.nsid));
> + if (!ns) {
> + nvme_req(req)->status = cpu_to_le16(NVME_SC_INVALID_NS);
> + goto free_ret;
> + }
> +
> + id->nidt = NVME_NIDT_UUID;
> + id->nidl = NVME_NIDT_UUID_LEN;
> + memcpy((char *)(id + 1), ns->uuid, NVME_NIDT_UUID_LEN);
> +
> + copy_data_request(req, id, 4096, true);
> +
> +free_ret:
> + kfree(id);
> + blk_mq_end_request(req, BLK_STS_OK);
> +}
> +
> +static void nvme_debug_identify_ctrl_cs(struct request *req)
> +{
> + struct nvme_id_ctrl_nvm *id;
> + id = kzalloc(sizeof(struct nvme_id_ctrl_nvm), GFP_NOIO);
> + if (!id) {
> + blk_mq_end_request(req, BLK_STS_RESOURCE);
> + return;
> + }
> +
> + copy_data_request(req, id, sizeof(struct nvme_id_ctrl_nvm), true);
> +
> + kfree(id);
> + blk_mq_end_request(req, BLK_STS_OK);
> +}
> +
> +static void nvme_debug_admin_rq(struct work_struct *w)
> +{
> + struct nvme_debug_request *ndr = container_of(w, struct nvme_debug_request, work);
> + struct request *req = (struct request *)ndr - 1;
> + struct nvme_debug_ctrl *ctrl = to_debug_ctrl(ndr->req.ctrl);
> +
> + switch (ndr->cmd.common.opcode) {
> + case nvme_admin_identify: {
> + switch (ndr->cmd.identify.cns) {
> + case NVME_ID_CNS_NS: {
> + percpu_down_read(&nvme_debug_sem);
> + nvme_debug_identify_ns(ctrl, req);
> + percpu_up_read(&nvme_debug_sem);
> + return;
> + };
> + case NVME_ID_CNS_CTRL: {
> + percpu_down_read(&nvme_debug_sem);
> + nvme_debug_identify_ctrl(ctrl, req);
> + percpu_up_read(&nvme_debug_sem);
> + return;
> + }
> + case NVME_ID_CNS_NS_ACTIVE_LIST: {
> + percpu_down_read(&nvme_debug_sem);
> + nvme_debug_identify_active_ns(ctrl, req);
> + percpu_up_read(&nvme_debug_sem);
> + return;
> + }
> + case NVME_ID_CNS_NS_DESC_LIST: {
> + percpu_down_read(&nvme_debug_sem);
> + nvme_debug_identify_ns_desc_list(ctrl, req);
> + percpu_up_read(&nvme_debug_sem);
> + return;
> + }
> + case NVME_ID_CNS_CS_CTRL: {
> + percpu_down_read(&nvme_debug_sem);
> + nvme_debug_identify_ctrl_cs(req);
> + percpu_up_read(&nvme_debug_sem);
> + return;
> + }
> + default: {
> + printk("nvme_admin_identify: %x\n", ndr->cmd.identify.cns);
> + break;
> + }
> + }
> + break;
> + }
> + default: {
> + printk("nvme_debug_admin_rq: %x\n", ndr->cmd.common.opcode);
> + break;
> + }
> + }
> + blk_mq_end_request(req, BLK_STS_NOTSUPP);
> +}
> +
> +static void nvme_debug_rw(struct nvme_debug_namespace *ns, struct request *req)
> +{
> + struct nvme_debug_request *ndr = blk_mq_rq_to_pdu(req);
> + __u64 lba = cpu_to_le64(ndr->cmd.rw.slba);
> + __u64 len = (__u64)cpu_to_le16(ndr->cmd.rw.length) + 1;
> + void *addr;
> + if (unlikely(lba + len < lba) || unlikely(lba + len > ns->n_sectors)) {
> + blk_mq_end_request(req, BLK_STS_NOTSUPP);
> + return;
> + }
> + addr = ns->space + (lba << ns->sector_size_bits);
> + copy_data_request(req, addr, len << ns->sector_size_bits, ndr->cmd.rw.opcode == nvme_cmd_read);
> + blk_mq_end_request(req, BLK_STS_OK);
> +}
> +
> +static void nvme_debug_copy(struct nvme_debug_namespace *ns, struct request *req)
> +{
> + struct nvme_debug_request *ndr = blk_mq_rq_to_pdu(req);
> + __u64 dlba = cpu_to_le64(ndr->cmd.copy.sdlba);
> + unsigned n_descs = ndr->cmd.copy.length + 1;
> + struct nvme_copy_desc *descs;
> + unsigned i, ret;
> +
> + descs = kmalloc(sizeof(struct nvme_copy_desc) * n_descs, GFP_NOIO | __GFP_NORETRY | __GFP_NOWARN);
> + if (!descs) {
> + blk_mq_end_request(req, BLK_STS_RESOURCE);
> + return;
> + }
> +
> + copy_data_request(req, descs, sizeof(struct nvme_copy_desc) * n_descs, false);
> +
> + for (i = 0; i < n_descs; i++) {
> + struct nvme_copy_desc *desc = &descs[i];
> + __u64 slba = cpu_to_le64(desc->slba);
> + __u64 len = (__u64)cpu_to_le16(desc->length) + 1;
> + void *saddr, *daddr;
> +
> + if (unlikely(slba + len < slba) || unlikely(slba + len > ns->n_sectors) ||
> + unlikely(dlba + len < dlba) || unlikely(dlba + len > ns->n_sectors)) {
> + ret = BLK_STS_NOTSUPP;
> + goto free_ret;
> + }
> +
> + saddr = ns->space + (slba << ns->sector_size_bits);
> + daddr = ns->space + (dlba << ns->sector_size_bits);
> +
> + memcpy(daddr, saddr, len << ns->sector_size_bits);
> +
> + dlba += len;
> + }
> +
> + ret = BLK_STS_OK;
> +
> +free_ret:
> + kfree(descs);
> +
> + blk_mq_end_request(req, ret);
> +}
> +
> +static void nvme_debug_io_rq(struct work_struct *w)
> +{
> + struct nvme_debug_request *ndr = container_of(w, struct nvme_debug_request, work);
> + struct request *req = (struct request *)ndr - 1;
> + struct nvme_debug_ctrl *ctrl = to_debug_ctrl(ndr->req.ctrl);
> + __u32 nsid = le32_to_cpu(ndr->cmd.common.nsid);
> + struct nvme_debug_namespace *ns;
> +
> + percpu_down_read(&nvme_debug_sem);
> + ns = nvme_debug_find_namespace(ctrl, nsid);
> + if (unlikely(!ns))
> + goto ret_notsupp;
> +
> + switch (ndr->cmd.common.opcode) {
> + case nvme_cmd_flush: {
> + blk_mq_end_request(req, BLK_STS_OK);
> + goto ret;
> + }
> + case nvme_cmd_read:
> + case nvme_cmd_write: {
> + nvme_debug_rw(ns, req);
> + goto ret;
> + }
> + case nvme_cmd_copy: {
> + nvme_debug_copy(ns, req);
> + goto ret;
> + }
> + default: {
> + printk("nvme_debug_io_rq: %x\n", ndr->cmd.common.opcode);
> + break;
> + }
> + }
> +ret_notsupp:
> + blk_mq_end_request(req, BLK_STS_NOTSUPP);
> +ret:
> + percpu_up_read(&nvme_debug_sem);
> +}
> +
> +static blk_status_t nvme_debug_queue_rq(struct blk_mq_hw_ctx *hctx, const struct blk_mq_queue_data *bd)
> +{
> + struct request *req = bd->rq;
> + struct nvme_debug_request *ndr = blk_mq_rq_to_pdu(req);
> + struct nvme_debug_ctrl *ctrl = to_debug_ctrl(ndr->req.ctrl);
> + struct nvme_ns *ns = hctx->queue->queuedata;
> + blk_status_t r;
> +
> + r = nvme_setup_cmd(ns, req);
> + if (unlikely(r))
> + return r;
> +
> + if (!ns) {
> + INIT_WORK(&ndr->work, nvme_debug_admin_rq);
> + queue_work(ctrl->admin_wq, &ndr->work);
> + return BLK_STS_OK;
> + } else if (unlikely((req->cmd_flags & REQ_OP_MASK) == REQ_OP_COPY_READ_TOKEN)) {
> + blk_mq_end_request(req, BLK_STS_OK);
> + return BLK_STS_OK;
> + } else {
> + INIT_WORK(&ndr->work, nvme_debug_io_rq);
> + queue_work(ctrl->io_wq, &ndr->work);
> + return BLK_STS_OK;
> + }
> +}
> +
> +static int nvme_debug_init_request(struct blk_mq_tag_set *set, struct request *req, unsigned hctx_idx, unsigned numa_node)
> +{
> + struct nvme_debug_ctrl *ctrl = set->driver_data;
> + struct nvme_debug_request *ndr = blk_mq_rq_to_pdu(req);
> + nvme_req(req)->ctrl = &ctrl->ctrl;
> + nvme_req(req)->cmd = &ndr->cmd;
> + return 0;
> +}
> +
> +static int nvme_debug_init_hctx(struct blk_mq_hw_ctx *hctx, void *data, unsigned hctx_idx)
> +{
> + struct nvme_debug_ctrl *ctrl = data;
> + hctx->driver_data = ctrl;
> + return 0;
> +}
> +
> +static const struct blk_mq_ops nvme_debug_mq_ops = {
> + .queue_rq = nvme_debug_queue_rq,
> + .init_request = nvme_debug_init_request,
> + .init_hctx = nvme_debug_init_hctx,
> +};
> +
> +static int nvme_debug_configure_admin_queue(struct nvme_debug_ctrl *ctrl)
> +{
> + int r;
> +
> + memset(&ctrl->admin_tag_set, 0, sizeof(ctrl->admin_tag_set));
> + ctrl->admin_tag_set.ops = &nvme_debug_mq_ops;
> + ctrl->admin_tag_set.queue_depth = NVME_AQ_MQ_TAG_DEPTH;
> + ctrl->admin_tag_set.reserved_tags = NVMF_RESERVED_TAGS;
> + ctrl->admin_tag_set.numa_node = ctrl->ctrl.numa_node;
> + ctrl->admin_tag_set.cmd_size = sizeof(struct nvme_debug_request);
> + ctrl->admin_tag_set.driver_data = ctrl;
> + ctrl->admin_tag_set.nr_hw_queues = 1;
> + ctrl->admin_tag_set.timeout = NVME_ADMIN_TIMEOUT;
> + ctrl->admin_tag_set.flags = BLK_MQ_F_NO_SCHED;
> +
> + r = blk_mq_alloc_tag_set(&ctrl->admin_tag_set);
> + if (r)
> + goto ret0;
> + ctrl->ctrl.admin_tagset = &ctrl->admin_tag_set;
> +
> + ctrl->ctrl.admin_q = blk_mq_init_queue(&ctrl->admin_tag_set);
> + if (IS_ERR(ctrl->ctrl.admin_q)) {
> + r = PTR_ERR(ctrl->ctrl.admin_q);
> + goto ret1;
> + }
> +
> + r = nvme_enable_ctrl(&ctrl->ctrl);
> + if (r)
> + goto ret2;
> +
> + nvme_start_admin_queue(&ctrl->ctrl);
> +
> + r = nvme_init_ctrl_finish(&ctrl->ctrl);
> + if (r)
> + goto ret3;
> +
> + return 0;
> +
> +ret3:
> + nvme_stop_admin_queue(&ctrl->ctrl);
> + blk_sync_queue(ctrl->ctrl.admin_q);
> +ret2:
> + blk_cleanup_queue(ctrl->ctrl.admin_q);
> +ret1:
> + blk_mq_free_tag_set(&ctrl->admin_tag_set);
> +ret0:
> + return r;
> +}
> +
> +static int nvme_debug_configure_io_queue(struct nvme_debug_ctrl *ctrl)
> +{
> + int r;
> +
> + memset(&ctrl->io_tag_set, 0, sizeof(ctrl->io_tag_set));
> + ctrl->io_tag_set.ops = &nvme_debug_mq_ops;
> + ctrl->io_tag_set.queue_depth = NVME_AQ_MQ_TAG_DEPTH;
> + ctrl->io_tag_set.reserved_tags = NVMF_RESERVED_TAGS;
> + ctrl->io_tag_set.numa_node = ctrl->ctrl.numa_node;
> + ctrl->io_tag_set.cmd_size = sizeof(struct nvme_debug_request);
> + ctrl->io_tag_set.driver_data = ctrl;
> + ctrl->io_tag_set.nr_hw_queues = 1;
> + ctrl->io_tag_set.timeout = NVME_ADMIN_TIMEOUT;
> + ctrl->io_tag_set.flags = BLK_MQ_F_NO_SCHED;
> +
> + r = blk_mq_alloc_tag_set(&ctrl->io_tag_set);
> + if (r)
> + goto ret0;
> + ctrl->ctrl.tagset = &ctrl->io_tag_set;
> + return 0;
> +
> +ret0:
> + return r;
> +}
> +
> +static const struct nvme_ctrl_ops nvme_debug_ctrl_ops = {
> + .name = "debug",
> + .module = THIS_MODULE,
> + .flags = NVME_F_FABRICS,
> + .reg_read32 = nvme_debug_reg_read32,
> + .reg_read64 = nvme_debug_reg_read64,
> + .reg_write32 = nvme_debug_reg_write32,
> + .free_ctrl = nvme_debug_free_ctrl,
> + .submit_async_event = nvme_debug_submit_async_event,
> + .delete_ctrl = nvme_debug_delete_ctrl,
> + .get_address = nvme_debug_get_address,
> +};
> +
> +static struct nvme_ctrl *nvme_debug_create_ctrl(struct device *dev,
> + struct nvmf_ctrl_options *opts)
> +{
> + int r;
> + struct nvme_debug_ctrl *ctrl;
> +
> + ctrl = kzalloc(sizeof(struct nvme_debug_ctrl), GFP_KERNEL);
> + if (!ctrl) {
> + r = -ENOMEM;
> + goto ret0;
> + }
> +
> + INIT_LIST_HEAD(&ctrl->list);
> + INIT_LIST_HEAD(&ctrl->namespaces);
> + ctrl->ctrl.opts = opts;
> + ctrl->ctrl.queue_count = 2;
> + INIT_WORK(&ctrl->ctrl.reset_work, nvme_debug_reset_ctrl_work);
> +
> + ctrl->admin_wq = alloc_workqueue("nvme-debug-admin", WQ_MEM_RECLAIM | WQ_UNBOUND, 1);
> + if (!ctrl->admin_wq)
> + goto ret1;
> +
> + ctrl->io_wq = alloc_workqueue("nvme-debug-io", WQ_MEM_RECLAIM, 0);
> + if (!ctrl->io_wq)
> + goto ret1;
> +
> + if (!nvme_debug_alloc_namespace(ctrl)) {
> + r = -ENOMEM;
> + goto ret1;
> + }
> +
> + r = nvme_init_ctrl(&ctrl->ctrl, dev, &nvme_debug_ctrl_ops, 0);
> + if (r)
> + goto ret1;
> +
> + if (!nvme_change_ctrl_state(&ctrl->ctrl, NVME_CTRL_CONNECTING))
> + goto ret2;
> +
> + r = nvme_debug_configure_admin_queue(ctrl);
> + if (r)
> + goto ret2;
> +
> + r = nvme_debug_configure_io_queue(ctrl);
> + if (r)
> + goto ret2;
> +
> + if (!nvme_change_ctrl_state(&ctrl->ctrl, NVME_CTRL_LIVE))
> + goto ret2;
> +
> + nvme_start_ctrl(&ctrl->ctrl);
> +
> + mutex_lock(&nvme_debug_ctrl_mutex);
> + list_add_tail(&ctrl->list, &nvme_debug_ctrl_list);
> + mutex_unlock(&nvme_debug_ctrl_mutex);
> +
> + return &ctrl->ctrl;
> +
> +ret2:
> + nvme_uninit_ctrl(&ctrl->ctrl);
> + nvme_put_ctrl(&ctrl->ctrl);
> + return ERR_PTR(r);
> +ret1:
> + nvme_debug_free_namespaces(ctrl);
> + if (ctrl->admin_wq)
> + destroy_workqueue(ctrl->admin_wq);
> + if (ctrl->io_wq)
> + destroy_workqueue(ctrl->io_wq);
> + kfree(ctrl);
> +ret0:
> + return ERR_PTR(r);
> +}
> +
> +static struct nvmf_transport_ops nvme_debug_transport = {
> + .name = "debug",
> + .module = THIS_MODULE,
> + .required_opts = NVMF_OPT_TRADDR,
> + .allowed_opts = NVMF_OPT_CTRL_LOSS_TMO,
> + .create_ctrl = nvme_debug_create_ctrl,
> +};
> +
> +static int __init nvme_debug_init_module(void)
> +{
> + nvmf_register_transport(&nvme_debug_transport);
> + return 0;
> +}
> +
> +static void __exit nvme_debug_cleanup_module(void)
> +{
> + struct nvme_debug_ctrl *ctrl;
> +
> + nvmf_unregister_transport(&nvme_debug_transport);
> +
> + mutex_lock(&nvme_debug_ctrl_mutex);
> + list_for_each_entry(ctrl, &nvme_debug_ctrl_list, list) {
> + nvme_delete_ctrl(&ctrl->ctrl);
> + }
> + mutex_unlock(&nvme_debug_ctrl_mutex);
> + flush_workqueue(nvme_delete_wq);
> +}
> +
> +module_init(nvme_debug_init_module);
> +module_exit(nvme_debug_cleanup_module);
> +
> +MODULE_LICENSE("GPL v2");
>
^ permalink raw reply [flat|nested] 272+ messages in thread* Re: [dm-devel] [RFC PATCH 3/3] nvme: add the "debug" host driver
@ 2022-02-02 6:01 ` Adam Manzanares
0 siblings, 0 replies; 272+ messages in thread
From: Adam Manzanares @ 2022-02-02 6:01 UTC (permalink / raw)
To: Mikulas Patocka
Cc: djwong, linux-nvme, clm, dm-devel, osandov, Javier González,
Bart Van Assche, linux-scsi, Christoph Hellwig, roland,
zach.brown, Chaitanya Kulkarni,
msnitzer@redhat.com >> msnitzer@redhat.com, josef,
linux-block, dsterba, kbus @imap.gmail.com>> Keith Busch,
Frederick.Knight, Jens Axboe, tytso, Kanchan Joshi,
martin.petersen@oracle.com >> Martin K. Petersen, jack,
linux-fsdevel, lsf-pc
On Tue, Feb 01, 2022 at 01:33:47PM -0500, Mikulas Patocka wrote:
> This patch adds a new driver "nvme-debug". It uses memory as a backing
> store and it is used to test the copy offload functionality.
>
We have looked at something similar to create a null nvme driver to test
interfaces poking the nvme driver without using the block layer. Have you
considered implementing this in the fabrics code since it is already virtualizng
a ssd controller?
BTW I think having the target code be able to implement simple copy without
moving data over the fabric would be a great way of showing off the command.
> Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
>
> ---
> drivers/nvme/host/Kconfig | 13
> drivers/nvme/host/Makefile | 1
> drivers/nvme/host/nvme-debug.c | 838 +++++++++++++++++++++++++++++++++++++++++
> 3 files changed, 852 insertions(+)
>
> Index: linux-2.6/drivers/nvme/host/Kconfig
> ===================================================================
> --- linux-2.6.orig/drivers/nvme/host/Kconfig 2022-02-01 18:34:22.000000000 +0100
> +++ linux-2.6/drivers/nvme/host/Kconfig 2022-02-01 18:34:22.000000000 +0100
> @@ -83,3 +83,16 @@ config NVME_TCP
> from https://urldefense.com/v3/__https://protect2.fireeye.com/v1/url?k=26ebb71c-79708e5a-26ea3c53-0cc47a3003e8-a628bd4c53dd84d1&q=1&e=9f16193b-4232-4453-9889-7cdf5d653922&u=https*3A*2F*2Fgithub.com*2Flinux-nvme*2Fnvme-cli__;JSUlJSU!!EwVzqGoTKBqv-0DWAJBm!HyJHAJgOq3M4SIOA0HvhX95q50ACkRtsiHWmAQERqjGLQ0pLb_Jru8QcwOQyix0tTVJA$ .
>
> If unsure, say N.
> +
> +config NVME_DEBUG
> + tristate "NVM Express debug"
> + depends on INET
> + depends on BLOCK
> + select NVME_CORE
> + select NVME_FABRICS
> + select CRYPTO
> + select CRYPTO_CRC32C
> + help
> + This pseudo driver simulates a NVMe adapter.
> +
> + If unsure, say N.
> Index: linux-2.6/drivers/nvme/host/Makefile
> ===================================================================
> --- linux-2.6.orig/drivers/nvme/host/Makefile 2022-02-01 18:34:22.000000000 +0100
> +++ linux-2.6/drivers/nvme/host/Makefile 2022-02-01 18:34:22.000000000 +0100
> @@ -8,6 +8,7 @@ obj-$(CONFIG_NVME_FABRICS) += nvme-fabr
> obj-$(CONFIG_NVME_RDMA) += nvme-rdma.o
> obj-$(CONFIG_NVME_FC) += nvme-fc.o
> obj-$(CONFIG_NVME_TCP) += nvme-tcp.o
> +obj-$(CONFIG_NVME_DEBUG) += nvme-debug.o
>
> nvme-core-y := core.o ioctl.o
> nvme-core-$(CONFIG_TRACING) += trace.o
> Index: linux-2.6/drivers/nvme/host/nvme-debug.c
> ===================================================================
> --- /dev/null 1970-01-01 00:00:00.000000000 +0000
> +++ linux-2.6/drivers/nvme/host/nvme-debug.c 2022-02-01 18:34:22.000000000 +0100
> @@ -0,0 +1,838 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * NVMe debug
> + */
> +
> +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
> +#include <linux/module.h>
> +#include <linux/init.h>
> +#include <linux/slab.h>
> +#include <linux/err.h>
> +#include <linux/blk-mq.h>
> +#include <linux/sort.h>
> +#include <linux/version.h>
> +
> +#include "nvme.h"
> +#include "fabrics.h"
> +
> +static ulong dev_size_mb = 16;
> +module_param_named(dev_size_mb, dev_size_mb, ulong, S_IRUGO | S_IWUSR);
> +MODULE_PARM_DESC(dev_size_mb, "size in MiB of the namespace(def=8)");
> +
> +static unsigned sector_size = 512;
> +module_param_named(sector_size, sector_size, uint, S_IRUGO | S_IWUSR);
> +MODULE_PARM_DESC(sector_size, "logical block size in bytes (def=512)");
> +
> +struct nvme_debug_ctrl {
> + struct nvme_ctrl ctrl;
> + uint32_t reg_cc;
> + struct blk_mq_tag_set admin_tag_set;
> + struct blk_mq_tag_set io_tag_set;
> + struct workqueue_struct *admin_wq;
> + struct workqueue_struct *io_wq;
> + struct list_head namespaces;
> + struct list_head list;
> +};
> +
> +struct nvme_debug_namespace {
> + struct list_head list;
> + uint32_t nsid;
> + unsigned char sector_size_bits;
> + size_t n_sectors;
> + void *space;
> + char uuid[16];
> +};
> +
> +struct nvme_debug_request {
> + struct nvme_request req;
> + struct nvme_command cmd;
> + struct work_struct work;
> +};
> +
> +static LIST_HEAD(nvme_debug_ctrl_list);
> +static DEFINE_MUTEX(nvme_debug_ctrl_mutex);
> +
> +DEFINE_STATIC_PERCPU_RWSEM(nvme_debug_sem);
> +
> +static inline struct nvme_debug_ctrl *to_debug_ctrl(struct nvme_ctrl *nctrl)
> +{
> + return container_of(nctrl, struct nvme_debug_ctrl, ctrl);
> +}
> +
> +static struct nvme_debug_namespace *nvme_debug_find_namespace(struct nvme_debug_ctrl *ctrl, unsigned nsid)
> +{
> + struct nvme_debug_namespace *ns;
> + list_for_each_entry(ns, &ctrl->namespaces, list) {
> + if (ns->nsid == nsid)
> + return ns;
> + }
> + return NULL;
> +}
> +
> +static bool nvme_debug_alloc_namespace(struct nvme_debug_ctrl *ctrl)
> +{
> + struct nvme_debug_namespace *ns;
> + unsigned s;
> + size_t dsm;
> +
> + ns = kmalloc(sizeof(struct nvme_debug_namespace), GFP_KERNEL);
> + if (!ns)
> + goto fail0;
> +
> + ns->nsid = 1;
> + while (nvme_debug_find_namespace(ctrl, ns->nsid))
> + ns->nsid++;
> +
> + s = READ_ONCE(sector_size);
> + if (s < 512 || s > PAGE_SIZE || !is_power_of_2(s))
> + goto fail1;
> + ns->sector_size_bits = __ffs(s);
> + dsm = READ_ONCE(dev_size_mb);
> + ns->n_sectors = dsm << (20 - ns->sector_size_bits);
> + if (ns->n_sectors >> (20 - ns->sector_size_bits) != dsm)
> + goto fail1;
> +
> + if (ns->n_sectors << ns->sector_size_bits >> ns->sector_size_bits != ns->n_sectors)
> + goto fail1;
> +
> + ns->space = vzalloc(ns->n_sectors << ns->sector_size_bits);
> + if (!ns->space)
> + goto fail1;
> +
> + generate_random_uuid(ns->uuid);
> +
> + list_add(&ns->list, &ctrl->namespaces);
> + return true;
> +
> +fail1:
> + kfree(ns);
> +fail0:
> + return false;
> +}
> +
> +static void nvme_debug_free_namespace(struct nvme_debug_namespace *ns)
> +{
> + vfree(ns->space);
> + list_del(&ns->list);
> + kfree(ns);
> +}
> +
> +static int nvme_debug_reg_read32(struct nvme_ctrl *nctrl, u32 off, u32 *val)
> +{
> + struct nvme_debug_ctrl *ctrl = to_debug_ctrl(nctrl);
> + switch (off) {
> + case NVME_REG_VS: {
> + *val = 0x20000;
> + break;
> + }
> + case NVME_REG_CC: {
> + *val = ctrl->reg_cc;
> + break;
> + }
> + case NVME_REG_CSTS: {
> + *val = 0;
> + if (ctrl->reg_cc & NVME_CC_ENABLE)
> + *val |= NVME_CSTS_RDY;
> + if (ctrl->reg_cc & NVME_CC_SHN_MASK)
> + *val |= NVME_CSTS_SHST_CMPLT;
> + break;
> + }
> + default: {
> + printk("nvme_debug_reg_read32: %x\n", off);
> + return -ENOSYS;
> + }
> + }
> + return 0;
> +}
> +
> +int nvme_debug_reg_read64(struct nvme_ctrl *nctrl, u32 off, u64 *val)
> +{
> + switch (off) {
> + case NVME_REG_CAP: {
> + *val = (1ULL << 0) | (1ULL << 37);
> + break;
> + }
> + default: {
> + printk("nvme_debug_reg_read64: %x\n", off);
> + return -ENOSYS;
> + }
> + }
> + return 0;
> +}
> +
> +int nvme_debug_reg_write32(struct nvme_ctrl *nctrl, u32 off, u32 val)
> +{
> + struct nvme_debug_ctrl *ctrl = to_debug_ctrl(nctrl);
> + switch (off) {
> + case NVME_REG_CC: {
> + ctrl->reg_cc = val;
> + break;
> + }
> + default: {
> + printk("nvme_debug_reg_write32: %x, %x\n", off, val);
> + return -ENOSYS;
> + }
> + }
> + return 0;
> +}
> +
> +static void nvme_debug_submit_async_event(struct nvme_ctrl *nctrl)
> +{
> + printk("nvme_debug_submit_async_event\n");
> +}
> +
> +static void nvme_debug_delete_ctrl(struct nvme_ctrl *nctrl)
> +{
> + nvme_shutdown_ctrl(nctrl);
> +}
> +
> +static void nvme_debug_free_namespaces(struct nvme_debug_ctrl *ctrl)
> +{
> + if (!list_empty(&ctrl->namespaces)) {
> + struct nvme_debug_namespace *ns = container_of(ctrl->namespaces.next, struct nvme_debug_namespace, list);
> + nvme_debug_free_namespace(ns);
> + }
> +}
> +
> +static void nvme_debug_free_ctrl(struct nvme_ctrl *nctrl)
> +{
> + struct nvme_debug_ctrl *ctrl = to_debug_ctrl(nctrl);
> +
> + flush_workqueue(ctrl->admin_wq);
> + flush_workqueue(ctrl->io_wq);
> +
> + nvme_debug_free_namespaces(ctrl);
> +
> + if (list_empty(&ctrl->list))
> + goto free_ctrl;
> +
> + mutex_lock(&nvme_debug_ctrl_mutex);
> + list_del(&ctrl->list);
> + mutex_unlock(&nvme_debug_ctrl_mutex);
> +
> + nvmf_free_options(nctrl->opts);
> +free_ctrl:
> + destroy_workqueue(ctrl->admin_wq);
> + destroy_workqueue(ctrl->io_wq);
> + kfree(ctrl);
> +}
> +
> +static int nvme_debug_get_address(struct nvme_ctrl *nctrl, char *buf, int size)
> +{
> + int len = 0;
> + len += snprintf(buf, size, "debug");
> + return len;
> +}
> +
> +static void nvme_debug_reset_ctrl_work(struct work_struct *work)
> +{
> + printk("nvme_reset_ctrl_work\n");
> +}
> +
> +static void copy_data_request(struct request *req, void *data, size_t size, bool to_req)
> +{
> + if (req->rq_flags & RQF_SPECIAL_PAYLOAD) {
> + void *addr;
> + struct bio_vec bv = req->special_vec;
> + addr = kmap_atomic(bv.bv_page);
> + if (to_req) {
> + memcpy(addr + bv.bv_offset, data, bv.bv_len);
> + flush_dcache_page(bv.bv_page);
> + } else {
> + flush_dcache_page(bv.bv_page);
> + memcpy(data, addr + bv.bv_offset, bv.bv_len);
> + }
> + kunmap_atomic(addr);
> + data += bv.bv_len;
> + size -= bv.bv_len;
> + } else {
> + struct req_iterator bi;
> + struct bio_vec bv;
> + rq_for_each_segment(bv, req, bi) {
> + void *addr;
> + addr = kmap_atomic(bv.bv_page);
> + if (to_req) {
> + memcpy(addr + bv.bv_offset, data, bv.bv_len);
> + flush_dcache_page(bv.bv_page);
> + } else {
> + flush_dcache_page(bv.bv_page);
> + memcpy(data, addr + bv.bv_offset, bv.bv_len);
> + }
> + kunmap_atomic(addr);
> + data += bv.bv_len;
> + size -= bv.bv_len;
> + }
> + }
> + if (size)
> + printk("size mismatch: %lx\n", (unsigned long)size);
> +}
> +
> +static void nvme_debug_identify_ns(struct nvme_debug_ctrl *ctrl, struct request *req)
> +{
> + struct nvme_id_ns *id;
> + struct nvme_debug_namespace *ns;
> + struct nvme_debug_request *ndr = blk_mq_rq_to_pdu(req);
> +
> + id = kzalloc(sizeof(struct nvme_id_ns), GFP_NOIO);
> + if (!id) {
> + blk_mq_end_request(req, BLK_STS_RESOURCE);
> + return;
> + }
> +
> + ns = nvme_debug_find_namespace(ctrl, le32_to_cpu(ndr->cmd.identify.nsid));
> + if (!ns) {
> + nvme_req(req)->status = cpu_to_le16(NVME_SC_INVALID_NS);
> + goto free_ret;
> + }
> +
> + id->nsze = cpu_to_le64(ns->n_sectors);
> + id->ncap = id->nsze;
> + id->nuse = id->nsze;
> + /*id->nlbaf = 0;*/
> + id->dlfeat = 0x01;
> + id->lbaf[0].ds = ns->sector_size_bits;
> +
> + copy_data_request(req, id, sizeof(struct nvme_id_ns), true);
> +
> +free_ret:
> + kfree(id);
> + blk_mq_end_request(req, BLK_STS_OK);
> +}
> +
> +static void nvme_debug_identify_ctrl(struct nvme_debug_ctrl *ctrl, struct request *req)
> +{
> + struct nvme_debug_namespace *ns;
> + struct nvme_id_ctrl *id;
> + char ver[9];
> + size_t ver_len;
> +
> + id = kzalloc(sizeof(struct nvme_id_ctrl), GFP_NOIO);
> + if (!id) {
> + blk_mq_end_request(req, BLK_STS_RESOURCE);
> + return;
> + }
> +
> + id->vid = cpu_to_le16(PCI_VENDOR_ID_REDHAT);
> + id->ssvid = cpu_to_le16(PCI_VENDOR_ID_REDHAT);
> + memset(id->sn, ' ', sizeof id->sn);
> + memset(id->mn, ' ', sizeof id->mn);
> + memcpy(id->mn, "nvme-debug", 10);
> + snprintf(ver, sizeof ver, "%X", LINUX_VERSION_CODE);
> + ver_len = min(strlen(ver), sizeof id->fr);
> + memset(id->fr, ' ', sizeof id->fr);
> + memcpy(id->fr, ver, ver_len);
> + memcpy(id->ieee, "\xe9\xf2\x40", sizeof id->ieee);
> + id->ver = cpu_to_le32(0x20000);
> + id->kas = cpu_to_le16(100);
> + id->sqes = 0x66;
> + id->cqes = 0x44;
> + id->maxcmd = cpu_to_le16(1);
> + mutex_lock(&nvme_debug_ctrl_mutex);
> + list_for_each_entry(ns, &ctrl->namespaces, list) {
> + if (ns->nsid > le32_to_cpu(id->nn))
> + id->nn = cpu_to_le32(ns->nsid);
> + }
> + mutex_unlock(&nvme_debug_ctrl_mutex);
> + id->oncs = cpu_to_le16(NVME_CTRL_ONCS_COPY);
> + id->vwc = 0x6;
> + id->mnan = cpu_to_le32(0xffffffff);
> + strcpy(id->subnqn, "nqn.2021-09.com.redhat:nvme-debug");
> + id->ioccsz = cpu_to_le32(4);
> + id->iorcsz = cpu_to_le32(1);
> +
> + copy_data_request(req, id, sizeof(struct nvme_id_ctrl), true);
> +
> + kfree(id);
> + blk_mq_end_request(req, BLK_STS_OK);
> +}
> +
> +static int cmp_ns(const void *a1, const void *a2)
> +{
> + __u32 v1 = le32_to_cpu(*(__u32 *)a1);
> + __u32 v2 = le32_to_cpu(*(__u32 *)a2);
> + if (!v1)
> + v1 = 0xffffffffU;
> + if (!v2)
> + v2 = 0xffffffffU;
> + if (v1 < v2)
> + return -1;
> + if (v1 > v2)
> + return 1;
> + return 0;
> +}
> +
> +static void nvme_debug_identify_active_ns(struct nvme_debug_ctrl *ctrl, struct request *req)
> +{
> + struct nvme_debug_namespace *ns;
> + struct nvme_debug_request *ndr = blk_mq_rq_to_pdu(req);
> + unsigned size;
> + __u32 *id;
> + unsigned idp;
> +
> + if (le32_to_cpu(ndr->cmd.identify.nsid) >= 0xFFFFFFFE) {
> + nvme_req(req)->status = cpu_to_le16(NVME_SC_INVALID_NS);
> + blk_mq_end_request(req, BLK_STS_OK);
> + return;
> + }
> +
> + mutex_lock(&nvme_debug_ctrl_mutex);
> + size = 0;
> + list_for_each_entry(ns, &ctrl->namespaces, list) {
> + size++;
> + }
> + size = min(size, 1024U);
> +
> + id = kzalloc(sizeof(__u32) * size, GFP_NOIO);
> + if (!id) {
> + mutex_unlock(&nvme_debug_ctrl_mutex);
> + blk_mq_end_request(req, BLK_STS_RESOURCE);
> + return;
> + }
> +
> + idp = 0;
> + list_for_each_entry(ns, &ctrl->namespaces, list) {
> + if (ns->nsid > le32_to_cpu(ndr->cmd.identify.nsid))
> + id[idp++] = cpu_to_le32(ns->nsid);
> + }
> + mutex_unlock(&nvme_debug_ctrl_mutex);
> + sort(id, idp, sizeof(__u32), cmp_ns, NULL);
> +
> + copy_data_request(req, id, sizeof(__u32) * 1024, true);
> +
> + kfree(id);
> + blk_mq_end_request(req, BLK_STS_OK);
> +}
> +
> +static void nvme_debug_identify_ns_desc_list(struct nvme_debug_ctrl *ctrl, struct request *req)
> +{
> + struct nvme_ns_id_desc *id;
> + struct nvme_debug_namespace *ns;
> + struct nvme_debug_request *ndr = blk_mq_rq_to_pdu(req);
> + id = kzalloc(4096, GFP_NOIO);
> + if (!id) {
> + blk_mq_end_request(req, BLK_STS_RESOURCE);
> + return;
> + }
> +
> + ns = nvme_debug_find_namespace(ctrl, le32_to_cpu(ndr->cmd.identify.nsid));
> + if (!ns) {
> + nvme_req(req)->status = cpu_to_le16(NVME_SC_INVALID_NS);
> + goto free_ret;
> + }
> +
> + id->nidt = NVME_NIDT_UUID;
> + id->nidl = NVME_NIDT_UUID_LEN;
> + memcpy((char *)(id + 1), ns->uuid, NVME_NIDT_UUID_LEN);
> +
> + copy_data_request(req, id, 4096, true);
> +
> +free_ret:
> + kfree(id);
> + blk_mq_end_request(req, BLK_STS_OK);
> +}
> +
> +static void nvme_debug_identify_ctrl_cs(struct request *req)
> +{
> + struct nvme_id_ctrl_nvm *id;
> + id = kzalloc(sizeof(struct nvme_id_ctrl_nvm), GFP_NOIO);
> + if (!id) {
> + blk_mq_end_request(req, BLK_STS_RESOURCE);
> + return;
> + }
> +
> + copy_data_request(req, id, sizeof(struct nvme_id_ctrl_nvm), true);
> +
> + kfree(id);
> + blk_mq_end_request(req, BLK_STS_OK);
> +}
> +
> +static void nvme_debug_admin_rq(struct work_struct *w)
> +{
> + struct nvme_debug_request *ndr = container_of(w, struct nvme_debug_request, work);
> + struct request *req = (struct request *)ndr - 1;
> + struct nvme_debug_ctrl *ctrl = to_debug_ctrl(ndr->req.ctrl);
> +
> + switch (ndr->cmd.common.opcode) {
> + case nvme_admin_identify: {
> + switch (ndr->cmd.identify.cns) {
> + case NVME_ID_CNS_NS: {
> + percpu_down_read(&nvme_debug_sem);
> + nvme_debug_identify_ns(ctrl, req);
> + percpu_up_read(&nvme_debug_sem);
> + return;
> + };
> + case NVME_ID_CNS_CTRL: {
> + percpu_down_read(&nvme_debug_sem);
> + nvme_debug_identify_ctrl(ctrl, req);
> + percpu_up_read(&nvme_debug_sem);
> + return;
> + }
> + case NVME_ID_CNS_NS_ACTIVE_LIST: {
> + percpu_down_read(&nvme_debug_sem);
> + nvme_debug_identify_active_ns(ctrl, req);
> + percpu_up_read(&nvme_debug_sem);
> + return;
> + }
> + case NVME_ID_CNS_NS_DESC_LIST: {
> + percpu_down_read(&nvme_debug_sem);
> + nvme_debug_identify_ns_desc_list(ctrl, req);
> + percpu_up_read(&nvme_debug_sem);
> + return;
> + }
> + case NVME_ID_CNS_CS_CTRL: {
> + percpu_down_read(&nvme_debug_sem);
> + nvme_debug_identify_ctrl_cs(req);
> + percpu_up_read(&nvme_debug_sem);
> + return;
> + }
> + default: {
> + printk("nvme_admin_identify: %x\n", ndr->cmd.identify.cns);
> + break;
> + }
> + }
> + break;
> + }
> + default: {
> + printk("nvme_debug_admin_rq: %x\n", ndr->cmd.common.opcode);
> + break;
> + }
> + }
> + blk_mq_end_request(req, BLK_STS_NOTSUPP);
> +}
> +
> +static void nvme_debug_rw(struct nvme_debug_namespace *ns, struct request *req)
> +{
> + struct nvme_debug_request *ndr = blk_mq_rq_to_pdu(req);
> + __u64 lba = cpu_to_le64(ndr->cmd.rw.slba);
> + __u64 len = (__u64)cpu_to_le16(ndr->cmd.rw.length) + 1;
> + void *addr;
> + if (unlikely(lba + len < lba) || unlikely(lba + len > ns->n_sectors)) {
> + blk_mq_end_request(req, BLK_STS_NOTSUPP);
> + return;
> + }
> + addr = ns->space + (lba << ns->sector_size_bits);
> + copy_data_request(req, addr, len << ns->sector_size_bits, ndr->cmd.rw.opcode == nvme_cmd_read);
> + blk_mq_end_request(req, BLK_STS_OK);
> +}
> +
> +static void nvme_debug_copy(struct nvme_debug_namespace *ns, struct request *req)
> +{
> + struct nvme_debug_request *ndr = blk_mq_rq_to_pdu(req);
> + __u64 dlba = cpu_to_le64(ndr->cmd.copy.sdlba);
> + unsigned n_descs = ndr->cmd.copy.length + 1;
> + struct nvme_copy_desc *descs;
> + unsigned i, ret;
> +
> + descs = kmalloc(sizeof(struct nvme_copy_desc) * n_descs, GFP_NOIO | __GFP_NORETRY | __GFP_NOWARN);
> + if (!descs) {
> + blk_mq_end_request(req, BLK_STS_RESOURCE);
> + return;
> + }
> +
> + copy_data_request(req, descs, sizeof(struct nvme_copy_desc) * n_descs, false);
> +
> + for (i = 0; i < n_descs; i++) {
> + struct nvme_copy_desc *desc = &descs[i];
> + __u64 slba = cpu_to_le64(desc->slba);
> + __u64 len = (__u64)cpu_to_le16(desc->length) + 1;
> + void *saddr, *daddr;
> +
> + if (unlikely(slba + len < slba) || unlikely(slba + len > ns->n_sectors) ||
> + unlikely(dlba + len < dlba) || unlikely(dlba + len > ns->n_sectors)) {
> + ret = BLK_STS_NOTSUPP;
> + goto free_ret;
> + }
> +
> + saddr = ns->space + (slba << ns->sector_size_bits);
> + daddr = ns->space + (dlba << ns->sector_size_bits);
> +
> + memcpy(daddr, saddr, len << ns->sector_size_bits);
> +
> + dlba += len;
> + }
> +
> + ret = BLK_STS_OK;
> +
> +free_ret:
> + kfree(descs);
> +
> + blk_mq_end_request(req, ret);
> +}
> +
> +static void nvme_debug_io_rq(struct work_struct *w)
> +{
> + struct nvme_debug_request *ndr = container_of(w, struct nvme_debug_request, work);
> + struct request *req = (struct request *)ndr - 1;
> + struct nvme_debug_ctrl *ctrl = to_debug_ctrl(ndr->req.ctrl);
> + __u32 nsid = le32_to_cpu(ndr->cmd.common.nsid);
> + struct nvme_debug_namespace *ns;
> +
> + percpu_down_read(&nvme_debug_sem);
> + ns = nvme_debug_find_namespace(ctrl, nsid);
> + if (unlikely(!ns))
> + goto ret_notsupp;
> +
> + switch (ndr->cmd.common.opcode) {
> + case nvme_cmd_flush: {
> + blk_mq_end_request(req, BLK_STS_OK);
> + goto ret;
> + }
> + case nvme_cmd_read:
> + case nvme_cmd_write: {
> + nvme_debug_rw(ns, req);
> + goto ret;
> + }
> + case nvme_cmd_copy: {
> + nvme_debug_copy(ns, req);
> + goto ret;
> + }
> + default: {
> + printk("nvme_debug_io_rq: %x\n", ndr->cmd.common.opcode);
> + break;
> + }
> + }
> +ret_notsupp:
> + blk_mq_end_request(req, BLK_STS_NOTSUPP);
> +ret:
> + percpu_up_read(&nvme_debug_sem);
> +}
> +
> +static blk_status_t nvme_debug_queue_rq(struct blk_mq_hw_ctx *hctx, const struct blk_mq_queue_data *bd)
> +{
> + struct request *req = bd->rq;
> + struct nvme_debug_request *ndr = blk_mq_rq_to_pdu(req);
> + struct nvme_debug_ctrl *ctrl = to_debug_ctrl(ndr->req.ctrl);
> + struct nvme_ns *ns = hctx->queue->queuedata;
> + blk_status_t r;
> +
> + r = nvme_setup_cmd(ns, req);
> + if (unlikely(r))
> + return r;
> +
> + if (!ns) {
> + INIT_WORK(&ndr->work, nvme_debug_admin_rq);
> + queue_work(ctrl->admin_wq, &ndr->work);
> + return BLK_STS_OK;
> + } else if (unlikely((req->cmd_flags & REQ_OP_MASK) == REQ_OP_COPY_READ_TOKEN)) {
> + blk_mq_end_request(req, BLK_STS_OK);
> + return BLK_STS_OK;
> + } else {
> + INIT_WORK(&ndr->work, nvme_debug_io_rq);
> + queue_work(ctrl->io_wq, &ndr->work);
> + return BLK_STS_OK;
> + }
> +}
> +
> +static int nvme_debug_init_request(struct blk_mq_tag_set *set, struct request *req, unsigned hctx_idx, unsigned numa_node)
> +{
> + struct nvme_debug_ctrl *ctrl = set->driver_data;
> + struct nvme_debug_request *ndr = blk_mq_rq_to_pdu(req);
> + nvme_req(req)->ctrl = &ctrl->ctrl;
> + nvme_req(req)->cmd = &ndr->cmd;
> + return 0;
> +}
> +
> +static int nvme_debug_init_hctx(struct blk_mq_hw_ctx *hctx, void *data, unsigned hctx_idx)
> +{
> + struct nvme_debug_ctrl *ctrl = data;
> + hctx->driver_data = ctrl;
> + return 0;
> +}
> +
> +static const struct blk_mq_ops nvme_debug_mq_ops = {
> + .queue_rq = nvme_debug_queue_rq,
> + .init_request = nvme_debug_init_request,
> + .init_hctx = nvme_debug_init_hctx,
> +};
> +
> +static int nvme_debug_configure_admin_queue(struct nvme_debug_ctrl *ctrl)
> +{
> + int r;
> +
> + memset(&ctrl->admin_tag_set, 0, sizeof(ctrl->admin_tag_set));
> + ctrl->admin_tag_set.ops = &nvme_debug_mq_ops;
> + ctrl->admin_tag_set.queue_depth = NVME_AQ_MQ_TAG_DEPTH;
> + ctrl->admin_tag_set.reserved_tags = NVMF_RESERVED_TAGS;
> + ctrl->admin_tag_set.numa_node = ctrl->ctrl.numa_node;
> + ctrl->admin_tag_set.cmd_size = sizeof(struct nvme_debug_request);
> + ctrl->admin_tag_set.driver_data = ctrl;
> + ctrl->admin_tag_set.nr_hw_queues = 1;
> + ctrl->admin_tag_set.timeout = NVME_ADMIN_TIMEOUT;
> + ctrl->admin_tag_set.flags = BLK_MQ_F_NO_SCHED;
> +
> + r = blk_mq_alloc_tag_set(&ctrl->admin_tag_set);
> + if (r)
> + goto ret0;
> + ctrl->ctrl.admin_tagset = &ctrl->admin_tag_set;
> +
> + ctrl->ctrl.admin_q = blk_mq_init_queue(&ctrl->admin_tag_set);
> + if (IS_ERR(ctrl->ctrl.admin_q)) {
> + r = PTR_ERR(ctrl->ctrl.admin_q);
> + goto ret1;
> + }
> +
> + r = nvme_enable_ctrl(&ctrl->ctrl);
> + if (r)
> + goto ret2;
> +
> + nvme_start_admin_queue(&ctrl->ctrl);
> +
> + r = nvme_init_ctrl_finish(&ctrl->ctrl);
> + if (r)
> + goto ret3;
> +
> + return 0;
> +
> +ret3:
> + nvme_stop_admin_queue(&ctrl->ctrl);
> + blk_sync_queue(ctrl->ctrl.admin_q);
> +ret2:
> + blk_cleanup_queue(ctrl->ctrl.admin_q);
> +ret1:
> + blk_mq_free_tag_set(&ctrl->admin_tag_set);
> +ret0:
> + return r;
> +}
> +
> +static int nvme_debug_configure_io_queue(struct nvme_debug_ctrl *ctrl)
> +{
> + int r;
> +
> + memset(&ctrl->io_tag_set, 0, sizeof(ctrl->io_tag_set));
> + ctrl->io_tag_set.ops = &nvme_debug_mq_ops;
> + ctrl->io_tag_set.queue_depth = NVME_AQ_MQ_TAG_DEPTH;
> + ctrl->io_tag_set.reserved_tags = NVMF_RESERVED_TAGS;
> + ctrl->io_tag_set.numa_node = ctrl->ctrl.numa_node;
> + ctrl->io_tag_set.cmd_size = sizeof(struct nvme_debug_request);
> + ctrl->io_tag_set.driver_data = ctrl;
> + ctrl->io_tag_set.nr_hw_queues = 1;
> + ctrl->io_tag_set.timeout = NVME_ADMIN_TIMEOUT;
> + ctrl->io_tag_set.flags = BLK_MQ_F_NO_SCHED;
> +
> + r = blk_mq_alloc_tag_set(&ctrl->io_tag_set);
> + if (r)
> + goto ret0;
> + ctrl->ctrl.tagset = &ctrl->io_tag_set;
> + return 0;
> +
> +ret0:
> + return r;
> +}
> +
> +static const struct nvme_ctrl_ops nvme_debug_ctrl_ops = {
> + .name = "debug",
> + .module = THIS_MODULE,
> + .flags = NVME_F_FABRICS,
> + .reg_read32 = nvme_debug_reg_read32,
> + .reg_read64 = nvme_debug_reg_read64,
> + .reg_write32 = nvme_debug_reg_write32,
> + .free_ctrl = nvme_debug_free_ctrl,
> + .submit_async_event = nvme_debug_submit_async_event,
> + .delete_ctrl = nvme_debug_delete_ctrl,
> + .get_address = nvme_debug_get_address,
> +};
> +
> +static struct nvme_ctrl *nvme_debug_create_ctrl(struct device *dev,
> + struct nvmf_ctrl_options *opts)
> +{
> + int r;
> + struct nvme_debug_ctrl *ctrl;
> +
> + ctrl = kzalloc(sizeof(struct nvme_debug_ctrl), GFP_KERNEL);
> + if (!ctrl) {
> + r = -ENOMEM;
> + goto ret0;
> + }
> +
> + INIT_LIST_HEAD(&ctrl->list);
> + INIT_LIST_HEAD(&ctrl->namespaces);
> + ctrl->ctrl.opts = opts;
> + ctrl->ctrl.queue_count = 2;
> + INIT_WORK(&ctrl->ctrl.reset_work, nvme_debug_reset_ctrl_work);
> +
> + ctrl->admin_wq = alloc_workqueue("nvme-debug-admin", WQ_MEM_RECLAIM | WQ_UNBOUND, 1);
> + if (!ctrl->admin_wq)
> + goto ret1;
> +
> + ctrl->io_wq = alloc_workqueue("nvme-debug-io", WQ_MEM_RECLAIM, 0);
> + if (!ctrl->io_wq)
> + goto ret1;
> +
> + if (!nvme_debug_alloc_namespace(ctrl)) {
> + r = -ENOMEM;
> + goto ret1;
> + }
> +
> + r = nvme_init_ctrl(&ctrl->ctrl, dev, &nvme_debug_ctrl_ops, 0);
> + if (r)
> + goto ret1;
> +
> + if (!nvme_change_ctrl_state(&ctrl->ctrl, NVME_CTRL_CONNECTING))
> + goto ret2;
> +
> + r = nvme_debug_configure_admin_queue(ctrl);
> + if (r)
> + goto ret2;
> +
> + r = nvme_debug_configure_io_queue(ctrl);
> + if (r)
> + goto ret2;
> +
> + if (!nvme_change_ctrl_state(&ctrl->ctrl, NVME_CTRL_LIVE))
> + goto ret2;
> +
> + nvme_start_ctrl(&ctrl->ctrl);
> +
> + mutex_lock(&nvme_debug_ctrl_mutex);
> + list_add_tail(&ctrl->list, &nvme_debug_ctrl_list);
> + mutex_unlock(&nvme_debug_ctrl_mutex);
> +
> + return &ctrl->ctrl;
> +
> +ret2:
> + nvme_uninit_ctrl(&ctrl->ctrl);
> + nvme_put_ctrl(&ctrl->ctrl);
> + return ERR_PTR(r);
> +ret1:
> + nvme_debug_free_namespaces(ctrl);
> + if (ctrl->admin_wq)
> + destroy_workqueue(ctrl->admin_wq);
> + if (ctrl->io_wq)
> + destroy_workqueue(ctrl->io_wq);
> + kfree(ctrl);
> +ret0:
> + return ERR_PTR(r);
> +}
> +
> +static struct nvmf_transport_ops nvme_debug_transport = {
> + .name = "debug",
> + .module = THIS_MODULE,
> + .required_opts = NVMF_OPT_TRADDR,
> + .allowed_opts = NVMF_OPT_CTRL_LOSS_TMO,
> + .create_ctrl = nvme_debug_create_ctrl,
> +};
> +
> +static int __init nvme_debug_init_module(void)
> +{
> + nvmf_register_transport(&nvme_debug_transport);
> + return 0;
> +}
> +
> +static void __exit nvme_debug_cleanup_module(void)
> +{
> + struct nvme_debug_ctrl *ctrl;
> +
> + nvmf_unregister_transport(&nvme_debug_transport);
> +
> + mutex_lock(&nvme_debug_ctrl_mutex);
> + list_for_each_entry(ctrl, &nvme_debug_ctrl_list, list) {
> + nvme_delete_ctrl(&ctrl->ctrl);
> + }
> + mutex_unlock(&nvme_debug_ctrl_mutex);
> + flush_workqueue(nvme_delete_wq);
> +}
> +
> +module_init(nvme_debug_init_module);
> +module_exit(nvme_debug_cleanup_module);
> +
> +MODULE_LICENSE("GPL v2");
>
--
dm-devel mailing list
dm-devel@redhat.com
https://listman.redhat.com/mailman/listinfo/dm-devel
^ permalink raw reply [flat|nested] 272+ messages in thread* Re: [RFC PATCH 3/3] nvme: add the "debug" host driver
2022-02-02 6:01 ` [dm-devel] " Adam Manzanares
@ 2022-02-03 16:06 ` Luis Chamberlain
-1 siblings, 0 replies; 272+ messages in thread
From: Luis Chamberlain @ 2022-02-03 16:06 UTC (permalink / raw)
To: Adam Manzanares
Cc: Mikulas Patocka, Javier González, Chaitanya Kulkarni,
linux-block, linux-scsi, dm-devel, linux-nvme, linux-fsdevel,
Jens Axboe, msnitzer@redhat.com >> msnitzer@redhat.com,
Bart Van Assche,
martin.petersen@oracle.com >> Martin K. Petersen, roland,
Hannes Reinecke, kbus @imap.gmail.com>> Keith Busch,
Christoph Hellwig, Frederick.Knight, zach.brown, osandov, lsf-pc,
djwong, josef, clm, dsterba, tytso, jack, Kanchan Joshi
On Wed, Feb 02, 2022 at 06:01:13AM +0000, Adam Manzanares wrote:
> BTW I think having the target code be able to implement simple copy without
> moving data over the fabric would be a great way of showing off the command.
Do you mean this should be implemented instead as a fabrics backend
instead because fabrics already instantiates and creates a virtual
nvme device? And so this would mean less code?
Luis
^ permalink raw reply [flat|nested] 272+ messages in thread
* Re: [dm-devel] [RFC PATCH 3/3] nvme: add the "debug" host driver
@ 2022-02-03 16:06 ` Luis Chamberlain
0 siblings, 0 replies; 272+ messages in thread
From: Luis Chamberlain @ 2022-02-03 16:06 UTC (permalink / raw)
To: Adam Manzanares
Cc: djwong, linux-nvme, clm, dm-devel, osandov, Javier González,
Bart Van Assche, linux-scsi, Christoph Hellwig, roland,
zach.brown, dsterba, Chaitanya Kulkarni,
msnitzer@redhat.com >> msnitzer@redhat.com, josef,
linux-block, Mikulas Patocka,
kbus @imap.gmail.com>> Keith Busch, Frederick.Knight,
Jens Axboe, tytso, Kanchan Joshi,
martin.petersen@oracle.com >> Martin K. Petersen, jack,
linux-fsdevel, lsf-pc
On Wed, Feb 02, 2022 at 06:01:13AM +0000, Adam Manzanares wrote:
> BTW I think having the target code be able to implement simple copy without
> moving data over the fabric would be a great way of showing off the command.
Do you mean this should be implemented instead as a fabrics backend
instead because fabrics already instantiates and creates a virtual
nvme device? And so this would mean less code?
Luis
--
dm-devel mailing list
dm-devel@redhat.com
https://listman.redhat.com/mailman/listinfo/dm-devel
^ permalink raw reply [flat|nested] 272+ messages in thread
* Re: [RFC PATCH 3/3] nvme: add the "debug" host driver
2022-02-03 16:06 ` [dm-devel] " Luis Chamberlain
@ 2022-02-03 16:15 ` Christoph Hellwig
-1 siblings, 0 replies; 272+ messages in thread
From: Christoph Hellwig @ 2022-02-03 16:15 UTC (permalink / raw)
To: Luis Chamberlain
Cc: Adam Manzanares, Mikulas Patocka, Javier González,
Chaitanya Kulkarni, linux-block, linux-scsi, dm-devel,
linux-nvme, linux-fsdevel, Jens Axboe,
msnitzer@redhat.com >> msnitzer@redhat.com,
Bart Van Assche,
martin.petersen@oracle.com >> Martin K. Petersen, roland,
Hannes Reinecke, kbus @imap.gmail.com>> Keith Busch,
Christoph Hellwig, Frederick.Knight, zach.brown, osandov, lsf-pc,
djwong, josef, clm, dsterba, tytso, jack, Kanchan Joshi
On Thu, Feb 03, 2022 at 08:06:33AM -0800, Luis Chamberlain wrote:
> On Wed, Feb 02, 2022 at 06:01:13AM +0000, Adam Manzanares wrote:
> > BTW I think having the target code be able to implement simple copy without
> > moving data over the fabric would be a great way of showing off the command.
>
> Do you mean this should be implemented instead as a fabrics backend
> instead because fabrics already instantiates and creates a virtual
> nvme device? And so this would mean less code?
It would be a lot less code. In fact I don't think we need any new code
at all. Just using nvme-loop on top of null_blk or brd should be all
that is needed.
^ permalink raw reply [flat|nested] 272+ messages in thread
* Re: [dm-devel] [RFC PATCH 3/3] nvme: add the "debug" host driver
@ 2022-02-03 16:15 ` Christoph Hellwig
0 siblings, 0 replies; 272+ messages in thread
From: Christoph Hellwig @ 2022-02-03 16:15 UTC (permalink / raw)
To: Luis Chamberlain
Cc: djwong, linux-nvme, clm, dm-devel, Adam Manzanares, osandov,
Javier González, Bart Van Assche, linux-scsi,
Christoph Hellwig, roland, zach.brown, dsterba,
Chaitanya Kulkarni,
msnitzer@redhat.com >> msnitzer@redhat.com, josef,
linux-block, Mikulas Patocka,
kbus @imap.gmail.com>> Keith Busch, Frederick.Knight,
Jens Axboe, tytso, Kanchan Joshi,
martin.petersen@oracle.com >> Martin K. Petersen, jack,
linux-fsdevel, lsf-pc
On Thu, Feb 03, 2022 at 08:06:33AM -0800, Luis Chamberlain wrote:
> On Wed, Feb 02, 2022 at 06:01:13AM +0000, Adam Manzanares wrote:
> > BTW I think having the target code be able to implement simple copy without
> > moving data over the fabric would be a great way of showing off the command.
>
> Do you mean this should be implemented instead as a fabrics backend
> instead because fabrics already instantiates and creates a virtual
> nvme device? And so this would mean less code?
It would be a lot less code. In fact I don't think we need any new code
at all. Just using nvme-loop on top of null_blk or brd should be all
that is needed.
--
dm-devel mailing list
dm-devel@redhat.com
https://listman.redhat.com/mailman/listinfo/dm-devel
^ permalink raw reply [flat|nested] 272+ messages in thread
* Re: [RFC PATCH 3/3] nvme: add the "debug" host driver
2022-02-03 16:15 ` [dm-devel] " Christoph Hellwig
@ 2022-02-03 19:34 ` Luis Chamberlain
-1 siblings, 0 replies; 272+ messages in thread
From: Luis Chamberlain @ 2022-02-03 19:34 UTC (permalink / raw)
To: Christoph Hellwig, Keith Busch
Cc: Adam Manzanares, Vincent Fu, Mikulas Patocka,
Javier González, Chaitanya Kulkarni, linux-block,
linux-scsi, dm-devel, linux-nvme, linux-fsdevel, Jens Axboe,
msnitzer@redhat.com >> msnitzer@redhat.com,
Bart Van Assche,
martin.petersen@oracle.com >> Martin K. Petersen, roland,
Hannes Reinecke, kbus @imap.gmail.com>> Keith Busch,
Frederick.Knight, zach.brown, osandov, lsf-pc, djwong, josef,
clm, dsterba, tytso, jack, Kanchan Joshi
On Thu, Feb 03, 2022 at 05:15:34PM +0100, Christoph Hellwig wrote:
> On Thu, Feb 03, 2022 at 08:06:33AM -0800, Luis Chamberlain wrote:
> > On Wed, Feb 02, 2022 at 06:01:13AM +0000, Adam Manzanares wrote:
> > > BTW I think having the target code be able to implement simple copy without
> > > moving data over the fabric would be a great way of showing off the command.
> >
> > Do you mean this should be implemented instead as a fabrics backend
> > instead because fabrics already instantiates and creates a virtual
> > nvme device? And so this would mean less code?
>
> It would be a lot less code. In fact I don't think we need any new code
> at all. Just using nvme-loop on top of null_blk or brd should be all
> that is needed.
Mikulas,
That begs the question why add this instead of using null_blk with
nvme-loop?
Luis
^ permalink raw reply [flat|nested] 272+ messages in thread
* Re: [dm-devel] [RFC PATCH 3/3] nvme: add the "debug" host driver
@ 2022-02-03 19:34 ` Luis Chamberlain
0 siblings, 0 replies; 272+ messages in thread
From: Luis Chamberlain @ 2022-02-03 19:34 UTC (permalink / raw)
To: Christoph Hellwig, Keith Busch
Cc: Vincent Fu, djwong, linux-nvme, clm, dm-devel, Adam Manzanares,
osandov, Javier González, Bart Van Assche, linux-scsi,
roland, zach.brown, dsterba, Chaitanya Kulkarni,
msnitzer@redhat.com >> msnitzer@redhat.com, josef,
linux-block, Mikulas Patocka,
kbus @imap.gmail.com>> Keith Busch, Frederick.Knight,
Jens Axboe, tytso, Kanchan Joshi,
martin.petersen@oracle.com >> Martin K. Petersen, jack,
linux-fsdevel, lsf-pc
On Thu, Feb 03, 2022 at 05:15:34PM +0100, Christoph Hellwig wrote:
> On Thu, Feb 03, 2022 at 08:06:33AM -0800, Luis Chamberlain wrote:
> > On Wed, Feb 02, 2022 at 06:01:13AM +0000, Adam Manzanares wrote:
> > > BTW I think having the target code be able to implement simple copy without
> > > moving data over the fabric would be a great way of showing off the command.
> >
> > Do you mean this should be implemented instead as a fabrics backend
> > instead because fabrics already instantiates and creates a virtual
> > nvme device? And so this would mean less code?
>
> It would be a lot less code. In fact I don't think we need any new code
> at all. Just using nvme-loop on top of null_blk or brd should be all
> that is needed.
Mikulas,
That begs the question why add this instead of using null_blk with
nvme-loop?
Luis
--
dm-devel mailing list
dm-devel@redhat.com
https://listman.redhat.com/mailman/listinfo/dm-devel
^ permalink raw reply [flat|nested] 272+ messages in thread
* Re: [RFC PATCH 3/3] nvme: add the "debug" host driver
2022-02-03 19:34 ` [dm-devel] " Luis Chamberlain
@ 2022-02-03 19:46 ` Adam Manzanares
-1 siblings, 0 replies; 272+ messages in thread
From: Adam Manzanares @ 2022-02-03 19:46 UTC (permalink / raw)
To: Luis Chamberlain
Cc: Christoph Hellwig, Keith Busch, Vincent Fu, Mikulas Patocka,
Javier González, Chaitanya Kulkarni, linux-block,
linux-scsi, dm-devel, linux-nvme, linux-fsdevel, Jens Axboe,
msnitzer@redhat.com >> msnitzer@redhat.com,
Bart Van Assche,
martin.petersen@oracle.com >> Martin K. Petersen, roland,
Hannes Reinecke, Frederick.Knight, zach.brown, osandov, lsf-pc,
djwong, josef, clm, dsterba, tytso, jack, Kanchan Joshi
On Thu, Feb 03, 2022 at 11:34:27AM -0800, Luis Chamberlain wrote:
> On Thu, Feb 03, 2022 at 05:15:34PM +0100, Christoph Hellwig wrote:
> > On Thu, Feb 03, 2022 at 08:06:33AM -0800, Luis Chamberlain wrote:
> > > On Wed, Feb 02, 2022 at 06:01:13AM +0000, Adam Manzanares wrote:
> > > > BTW I think having the target code be able to implement simple copy without
> > > > moving data over the fabric would be a great way of showing off the command.
> > >
> > > Do you mean this should be implemented instead as a fabrics backend
> > > instead because fabrics already instantiates and creates a virtual
> > > nvme device? And so this would mean less code?
> >
> > It would be a lot less code. In fact I don't think we need any new code
> > at all. Just using nvme-loop on top of null_blk or brd should be all
> > that is needed.
>
> Mikulas,
>
> That begs the question why add this instead of using null_blk with
> nvme-loop?
I think the only thing missing would be a handler for the simple copy command.
>
> Luis
^ permalink raw reply [flat|nested] 272+ messages in thread
* Re: [dm-devel] [RFC PATCH 3/3] nvme: add the "debug" host driver
@ 2022-02-03 19:46 ` Adam Manzanares
0 siblings, 0 replies; 272+ messages in thread
From: Adam Manzanares @ 2022-02-03 19:46 UTC (permalink / raw)
To: Luis Chamberlain
Cc: Vincent Fu, djwong, linux-nvme, clm, dm-devel, osandov,
Javier González, Bart Van Assche, linux-scsi,
Christoph Hellwig, roland, zach.brown, dsterba,
Chaitanya Kulkarni,
msnitzer@redhat.com >> msnitzer@redhat.com, josef,
linux-block, Mikulas Patocka, Keith Busch, Frederick.Knight,
Jens Axboe, tytso, Kanchan Joshi,
martin.petersen@oracle.com >> Martin K. Petersen, jack,
linux-fsdevel, lsf-pc
On Thu, Feb 03, 2022 at 11:34:27AM -0800, Luis Chamberlain wrote:
> On Thu, Feb 03, 2022 at 05:15:34PM +0100, Christoph Hellwig wrote:
> > On Thu, Feb 03, 2022 at 08:06:33AM -0800, Luis Chamberlain wrote:
> > > On Wed, Feb 02, 2022 at 06:01:13AM +0000, Adam Manzanares wrote:
> > > > BTW I think having the target code be able to implement simple copy without
> > > > moving data over the fabric would be a great way of showing off the command.
> > >
> > > Do you mean this should be implemented instead as a fabrics backend
> > > instead because fabrics already instantiates and creates a virtual
> > > nvme device? And so this would mean less code?
> >
> > It would be a lot less code. In fact I don't think we need any new code
> > at all. Just using nvme-loop on top of null_blk or brd should be all
> > that is needed.
>
> Mikulas,
>
> That begs the question why add this instead of using null_blk with
> nvme-loop?
I think the only thing missing would be a handler for the simple copy command.
>
> Luis
--
dm-devel mailing list
dm-devel@redhat.com
https://listman.redhat.com/mailman/listinfo/dm-devel
^ permalink raw reply [flat|nested] 272+ messages in thread
* Re: [RFC PATCH 3/3] nvme: add the "debug" host driver
2022-02-03 19:34 ` [dm-devel] " Luis Chamberlain
@ 2022-02-03 20:57 ` Mikulas Patocka
-1 siblings, 0 replies; 272+ messages in thread
From: Mikulas Patocka @ 2022-02-03 20:57 UTC (permalink / raw)
To: Luis Chamberlain
Cc: Christoph Hellwig, Keith Busch, Adam Manzanares, Vincent Fu,
Javier González, Chaitanya Kulkarni, linux-block,
linux-scsi, dm-devel, linux-nvme, linux-fsdevel, Jens Axboe,
msnitzer@redhat.com >> msnitzer@redhat.com,
Bart Van Assche,
martin.petersen@oracle.com >> Martin K. Petersen, roland,
Hannes Reinecke, Frederick.Knight, zach.brown, osandov, lsf-pc,
djwong, josef, clm, dsterba, tytso, jack, Kanchan Joshi
On Thu, 3 Feb 2022, Luis Chamberlain wrote:
> On Thu, Feb 03, 2022 at 05:15:34PM +0100, Christoph Hellwig wrote:
> > On Thu, Feb 03, 2022 at 08:06:33AM -0800, Luis Chamberlain wrote:
> > > On Wed, Feb 02, 2022 at 06:01:13AM +0000, Adam Manzanares wrote:
> > > > BTW I think having the target code be able to implement simple copy without
> > > > moving data over the fabric would be a great way of showing off the command.
> > >
> > > Do you mean this should be implemented instead as a fabrics backend
> > > instead because fabrics already instantiates and creates a virtual
> > > nvme device? And so this would mean less code?
> >
> > It would be a lot less code. In fact I don't think we need any new code
> > at all. Just using nvme-loop on top of null_blk or brd should be all
> > that is needed.
>
> Mikulas,
>
> That begs the question why add this instead of using null_blk with
> nvme-loop?
>
> Luis
I think that nvme-debug (the patch 3) doesn't have to be added to the
kernel.
Nvme-debug was an old student project that was canceled. I used it because
it was very easy to add copy offload functionality to it - adding this
capability took just one function with 43 lines of code (nvme_debug_copy).
I don't know if someone is interested in continuing the development of
nvme-debug. If yes, I can continue the development, if not, we can just
drop it.
Mikulas
^ permalink raw reply [flat|nested] 272+ messages in thread
* Re: [dm-devel] [RFC PATCH 3/3] nvme: add the "debug" host driver
@ 2022-02-03 20:57 ` Mikulas Patocka
0 siblings, 0 replies; 272+ messages in thread
From: Mikulas Patocka @ 2022-02-03 20:57 UTC (permalink / raw)
To: Luis Chamberlain
Cc: Vincent Fu, djwong, linux-nvme, clm, dm-devel, Adam Manzanares,
osandov, Javier González, Bart Van Assche, linux-scsi,
Christoph Hellwig, roland, zach.brown, Chaitanya Kulkarni,
msnitzer@redhat.com >> msnitzer@redhat.com, josef,
linux-block, dsterba, Keith Busch, Frederick.Knight, Jens Axboe,
tytso, Kanchan Joshi,
martin.petersen@oracle.com >> Martin K. Petersen, jack,
linux-fsdevel, lsf-pc
On Thu, 3 Feb 2022, Luis Chamberlain wrote:
> On Thu, Feb 03, 2022 at 05:15:34PM +0100, Christoph Hellwig wrote:
> > On Thu, Feb 03, 2022 at 08:06:33AM -0800, Luis Chamberlain wrote:
> > > On Wed, Feb 02, 2022 at 06:01:13AM +0000, Adam Manzanares wrote:
> > > > BTW I think having the target code be able to implement simple copy without
> > > > moving data over the fabric would be a great way of showing off the command.
> > >
> > > Do you mean this should be implemented instead as a fabrics backend
> > > instead because fabrics already instantiates and creates a virtual
> > > nvme device? And so this would mean less code?
> >
> > It would be a lot less code. In fact I don't think we need any new code
> > at all. Just using nvme-loop on top of null_blk or brd should be all
> > that is needed.
>
> Mikulas,
>
> That begs the question why add this instead of using null_blk with
> nvme-loop?
>
> Luis
I think that nvme-debug (the patch 3) doesn't have to be added to the
kernel.
Nvme-debug was an old student project that was canceled. I used it because
it was very easy to add copy offload functionality to it - adding this
capability took just one function with 43 lines of code (nvme_debug_copy).
I don't know if someone is interested in continuing the development of
nvme-debug. If yes, I can continue the development, if not, we can just
drop it.
Mikulas
--
dm-devel mailing list
dm-devel@redhat.com
https://listman.redhat.com/mailman/listinfo/dm-devel
^ permalink raw reply [flat|nested] 272+ messages in thread
* Re: [RFC PATCH 3/3] nvme: add the "debug" host driver
2022-02-03 20:57 ` [dm-devel] " Mikulas Patocka
@ 2022-02-03 22:52 ` Adam Manzanares
-1 siblings, 0 replies; 272+ messages in thread
From: Adam Manzanares @ 2022-02-03 22:52 UTC (permalink / raw)
To: Mikulas Patocka, joshi.k
Cc: Luis Chamberlain, Christoph Hellwig, Keith Busch, Vincent Fu,
Javier González, Chaitanya Kulkarni, linux-block,
linux-scsi, dm-devel, linux-nvme, linux-fsdevel, Jens Axboe,
msnitzer@redhat.com >> msnitzer@redhat.com,
Bart Van Assche,
martin.petersen@oracle.com >> Martin K. Petersen, roland,
Hannes Reinecke, Frederick.Knight, zach.brown, osandov, lsf-pc,
djwong, josef, clm, dsterba, tytso, jack, Kanchan Joshi
On Thu, Feb 03, 2022 at 03:57:55PM -0500, Mikulas Patocka wrote:
>
>
> On Thu, 3 Feb 2022, Luis Chamberlain wrote:
>
> > On Thu, Feb 03, 2022 at 05:15:34PM +0100, Christoph Hellwig wrote:
> > > On Thu, Feb 03, 2022 at 08:06:33AM -0800, Luis Chamberlain wrote:
> > > > On Wed, Feb 02, 2022 at 06:01:13AM +0000, Adam Manzanares wrote:
> > > > > BTW I think having the target code be able to implement simple copy without
> > > > > moving data over the fabric would be a great way of showing off the command.
> > > >
> > > > Do you mean this should be implemented instead as a fabrics backend
> > > > instead because fabrics already instantiates and creates a virtual
> > > > nvme device? And so this would mean less code?
> > >
> > > It would be a lot less code. In fact I don't think we need any new code
> > > at all. Just using nvme-loop on top of null_blk or brd should be all
> > > that is needed.
> >
> > Mikulas,
> >
> > That begs the question why add this instead of using null_blk with
> > nvme-loop?
> >
> > Luis
>
> I think that nvme-debug (the patch 3) doesn't have to be added to the
> kernel.
>
> Nvme-debug was an old student project that was canceled. I used it because
> it was very easy to add copy offload functionality to it - adding this
> capability took just one function with 43 lines of code (nvme_debug_copy).
>
BTW Kanchan's group has looked at adding copy offload support to the target.
I'll let him respond on the timing of upstreaming, I'm under the assumption
that it is also a relatively small patch to the target code.
> I don't know if someone is interested in continuing the development of
> nvme-debug. If yes, I can continue the development, if not, we can just
> drop it.
>
> Mikulas
>
^ permalink raw reply [flat|nested] 272+ messages in thread
* Re: [dm-devel] [RFC PATCH 3/3] nvme: add the "debug" host driver
@ 2022-02-03 22:52 ` Adam Manzanares
0 siblings, 0 replies; 272+ messages in thread
From: Adam Manzanares @ 2022-02-03 22:52 UTC (permalink / raw)
To: Mikulas Patocka, joshi.k
Cc: Vincent Fu, djwong, linux-nvme, clm, dm-devel, osandov,
msnitzer@redhat.com >> msnitzer@redhat.com,
Bart Van Assche, linux-scsi, Christoph Hellwig, roland,
zach.brown, Chaitanya Kulkarni, Javier González, josef,
linux-block, dsterba, Keith Busch, Frederick.Knight, Jens Axboe,
tytso, Kanchan Joshi,
martin.petersen@oracle.com >> Martin K. Petersen,
Luis Chamberlain, jack, linux-fsdevel, lsf-pc
On Thu, Feb 03, 2022 at 03:57:55PM -0500, Mikulas Patocka wrote:
>
>
> On Thu, 3 Feb 2022, Luis Chamberlain wrote:
>
> > On Thu, Feb 03, 2022 at 05:15:34PM +0100, Christoph Hellwig wrote:
> > > On Thu, Feb 03, 2022 at 08:06:33AM -0800, Luis Chamberlain wrote:
> > > > On Wed, Feb 02, 2022 at 06:01:13AM +0000, Adam Manzanares wrote:
> > > > > BTW I think having the target code be able to implement simple copy without
> > > > > moving data over the fabric would be a great way of showing off the command.
> > > >
> > > > Do you mean this should be implemented instead as a fabrics backend
> > > > instead because fabrics already instantiates and creates a virtual
> > > > nvme device? And so this would mean less code?
> > >
> > > It would be a lot less code. In fact I don't think we need any new code
> > > at all. Just using nvme-loop on top of null_blk or brd should be all
> > > that is needed.
> >
> > Mikulas,
> >
> > That begs the question why add this instead of using null_blk with
> > nvme-loop?
> >
> > Luis
>
> I think that nvme-debug (the patch 3) doesn't have to be added to the
> kernel.
>
> Nvme-debug was an old student project that was canceled. I used it because
> it was very easy to add copy offload functionality to it - adding this
> capability took just one function with 43 lines of code (nvme_debug_copy).
>
BTW Kanchan's group has looked at adding copy offload support to the target.
I'll let him respond on the timing of upstreaming, I'm under the assumption
that it is also a relatively small patch to the target code.
> I don't know if someone is interested in continuing the development of
> nvme-debug. If yes, I can continue the development, if not, we can just
> drop it.
>
> Mikulas
>
--
dm-devel mailing list
dm-devel@redhat.com
https://listman.redhat.com/mailman/listinfo/dm-devel
^ permalink raw reply [flat|nested] 272+ messages in thread
* Re: [RFC PATCH 3/3] nvme: add the "debug" host driver
2022-02-03 20:57 ` [dm-devel] " Mikulas Patocka
@ 2022-02-04 3:00 ` Chaitanya Kulkarni
-1 siblings, 0 replies; 272+ messages in thread
From: Chaitanya Kulkarni @ 2022-02-04 3:00 UTC (permalink / raw)
To: Mikulas Patocka
Cc: Christoph Hellwig, Keith Busch, Adam Manzanares, Vincent Fu,
Javier González, linux-block, linux-scsi, dm-devel,
linux-nvme, linux-fsdevel, Jens Axboe,
msnitzer@redhat.com >> msnitzer@redhat.com,
Bart Van Assche,
martin.petersen@oracle.com >> Martin K. Petersen, roland,
Hannes Reinecke, Frederick.Knight, zach.brown, osandov, lsf-pc,
djwong, josef, clm, dsterba, tytso, jack, Kanchan Joshi,
Luis Chamberlain
Mikulas,
On 2/3/22 12:57, Mikulas Patocka wrote:
>
>
> On Thu, 3 Feb 2022, Luis Chamberlain wrote:
>
>> On Thu, Feb 03, 2022 at 05:15:34PM +0100, Christoph Hellwig wrote:
>>> On Thu, Feb 03, 2022 at 08:06:33AM -0800, Luis Chamberlain wrote:
>>>> On Wed, Feb 02, 2022 at 06:01:13AM +0000, Adam Manzanares wrote:
>>>>> BTW I think having the target code be able to implement simple copy without
>>>>> moving data over the fabric would be a great way of showing off the command.
>>>>
>>>> Do you mean this should be implemented instead as a fabrics backend
>>>> instead because fabrics already instantiates and creates a virtual
>>>> nvme device? And so this would mean less code?
>>>
>>> It would be a lot less code. In fact I don't think we need any new code
>>> at all. Just using nvme-loop on top of null_blk or brd should be all
>>> that is needed.
>>
>> Mikulas,
>>
>> That begs the question why add this instead of using null_blk with
>> nvme-loop?
>>
>> Luis
>
> I think that nvme-debug (the patch 3) doesn't have to be added to the
> kernel.
>
> Nvme-debug was an old student project that was canceled. I used it because
> it was very easy to add copy offload functionality to it - adding this
> capability took just one function with 43 lines of code (nvme_debug_copy).
>
> I don't know if someone is interested in continuing the development of
> nvme-debug. If yes, I can continue the development, if not, we can just
> drop it.
>
> Mikulas
>
Thanks for explanation seems like we are on the same page, we don't
want any code such as this that is controller specific in the
NVMe repo including target.
-ck
^ permalink raw reply [flat|nested] 272+ messages in thread
* Re: [dm-devel] [RFC PATCH 3/3] nvme: add the "debug" host driver
@ 2022-02-04 3:00 ` Chaitanya Kulkarni
0 siblings, 0 replies; 272+ messages in thread
From: Chaitanya Kulkarni @ 2022-02-04 3:00 UTC (permalink / raw)
To: Mikulas Patocka
Cc: Vincent Fu, djwong, linux-nvme, clm, dm-devel, Manzanares,
osandov, Javier González, Assche, linux-scsi,
Christoph Hellwig, roland, zach.brown,
msnitzer@redhat.com >> msnitzer@redhat.com, josef,
linux-block, dsterba, Keith Busch, Frederick.Knight, Jens Axboe,
tytso, Kanchan Joshi,
martin.petersen@oracle.com >> Martin K. Petersen,
Luis Chamberlain, jack, linux-fsdevel, lsf-pc
Mikulas,
On 2/3/22 12:57, Mikulas Patocka wrote:
>
>
> On Thu, 3 Feb 2022, Luis Chamberlain wrote:
>
>> On Thu, Feb 03, 2022 at 05:15:34PM +0100, Christoph Hellwig wrote:
>>> On Thu, Feb 03, 2022 at 08:06:33AM -0800, Luis Chamberlain wrote:
>>>> On Wed, Feb 02, 2022 at 06:01:13AM +0000, Adam Manzanares wrote:
>>>>> BTW I think having the target code be able to implement simple copy without
>>>>> moving data over the fabric would be a great way of showing off the command.
>>>>
>>>> Do you mean this should be implemented instead as a fabrics backend
>>>> instead because fabrics already instantiates and creates a virtual
>>>> nvme device? And so this would mean less code?
>>>
>>> It would be a lot less code. In fact I don't think we need any new code
>>> at all. Just using nvme-loop on top of null_blk or brd should be all
>>> that is needed.
>>
>> Mikulas,
>>
>> That begs the question why add this instead of using null_blk with
>> nvme-loop?
>>
>> Luis
>
> I think that nvme-debug (the patch 3) doesn't have to be added to the
> kernel.
>
> Nvme-debug was an old student project that was canceled. I used it because
> it was very easy to add copy offload functionality to it - adding this
> capability took just one function with 43 lines of code (nvme_debug_copy).
>
> I don't know if someone is interested in continuing the development of
> nvme-debug. If yes, I can continue the development, if not, we can just
> drop it.
>
> Mikulas
>
Thanks for explanation seems like we are on the same page, we don't
want any code such as this that is controller specific in the
NVMe repo including target.
-ck
--
dm-devel mailing list
dm-devel@redhat.com
https://listman.redhat.com/mailman/listinfo/dm-devel
^ permalink raw reply [flat|nested] 272+ messages in thread
* Re: [RFC PATCH 3/3] nvme: add the "debug" host driver
2022-02-03 16:06 ` [dm-devel] " Luis Chamberlain
@ 2022-02-04 3:05 ` Chaitanya Kulkarni
-1 siblings, 0 replies; 272+ messages in thread
From: Chaitanya Kulkarni @ 2022-02-04 3:05 UTC (permalink / raw)
To: Luis Chamberlain, Adam Manzanares
Cc: Mikulas Patocka, Javier González, linux-block, linux-scsi,
dm-devel, linux-nvme, linux-fsdevel, Jens Axboe,
msnitzer@redhat.com >> msnitzer@redhat.com,
Bart Van Assche,
martin.petersen@oracle.com >> Martin K. Petersen, roland,
Hannes Reinecke, kbus @imap.gmail.com>> Keith Busch,
Christoph Hellwig, Frederick.Knight, zach.brown, osandov, lsf-pc,
djwong, josef, clm, dsterba, tytso, jack, Kanchan Joshi
On 2/3/22 08:06, Luis Chamberlain wrote:
> On Wed, Feb 02, 2022 at 06:01:13AM +0000, Adam Manzanares wrote:
>> BTW I think having the target code be able to implement simple copy without
>> moving data over the fabric would be a great way of showing off the command.
>
> Do you mean this should be implemented instead as a fabrics backend
> instead because fabrics already instantiates and creates a virtual
> nvme device? And so this would mean less code?
>
> Luis
>
This should not be implemented on the fabrics backend at all or even
in nvme-loop. Use QEMU for testing memory backed features.
-ck
^ permalink raw reply [flat|nested] 272+ messages in thread
* Re: [dm-devel] [RFC PATCH 3/3] nvme: add the "debug" host driver
@ 2022-02-04 3:05 ` Chaitanya Kulkarni
0 siblings, 0 replies; 272+ messages in thread
From: Chaitanya Kulkarni @ 2022-02-04 3:05 UTC (permalink / raw)
To: Luis Chamberlain, Adam Manzanares
Cc: djwong, linux-nvme, clm, dm-devel, osandov, Javier González,
Assche, linux-scsi, Christoph Hellwig, roland, zach.brown,
dsterba, msnitzer@redhat.com >> msnitzer@redhat.com, josef,
linux-block, Mikulas Patocka,
kbus @imap.gmail.com>> Keith Busch, Frederick.Knight,
Jens Axboe, tytso, Kanchan Joshi,
martin.petersen@oracle.com >> Martin K. Petersen, jack,
linux-fsdevel, lsf-pc
On 2/3/22 08:06, Luis Chamberlain wrote:
> On Wed, Feb 02, 2022 at 06:01:13AM +0000, Adam Manzanares wrote:
>> BTW I think having the target code be able to implement simple copy without
>> moving data over the fabric would be a great way of showing off the command.
>
> Do you mean this should be implemented instead as a fabrics backend
> instead because fabrics already instantiates and creates a virtual
> nvme device? And so this would mean less code?
>
> Luis
>
This should not be implemented on the fabrics backend at all or even
in nvme-loop. Use QEMU for testing memory backed features.
-ck
--
dm-devel mailing list
dm-devel@redhat.com
https://listman.redhat.com/mailman/listinfo/dm-devel
^ permalink raw reply [flat|nested] 272+ messages in thread
* Re: [RFC PATCH 3/3] nvme: add the "debug" host driver
2022-02-01 18:33 ` [dm-devel] " Mikulas Patocka
@ 2022-02-02 7:23 ` kernel test robot
-1 siblings, 0 replies; 272+ messages in thread
From: kernel test robot @ 2022-02-02 7:23 UTC (permalink / raw)
To: Mikulas Patocka; +Cc: llvm, kbuild-all
Hi Mikulas,
[FYI, it's a private test report for your RFC patch.]
[auto build test WARNING on axboe-block/for-next]
[also build test WARNING on linus/master v5.17-rc2 next-20220202]
[cannot apply to linux-nvme/for-next]
[If your patch is applied to the wrong git tree, kindly drop us a note.
And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch]
url: https://github.com/0day-ci/linux/commits/Mikulas-Patocka/block-add-copy-offload-support/20220202-033318
base: https://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux-block.git for-next
config: x86_64-allmodconfig (https://download.01.org/0day-ci/archive/20220202/202202021549.3g79sGNE-lkp@intel.com/config)
compiler: clang version 14.0.0 (https://github.com/llvm/llvm-project 6b1e844b69f15bb7dffaf9365cd2b355d2eb7579)
reproduce (this is a W=1 build):
wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
chmod +x ~/bin/make.cross
# https://github.com/0day-ci/linux/commit/b59e9d971770c50aaac1d07d6edaa10a4a47171b
git remote add linux-review https://github.com/0day-ci/linux
git fetch --no-tags linux-review Mikulas-Patocka/block-add-copy-offload-support/20220202-033318
git checkout b59e9d971770c50aaac1d07d6edaa10a4a47171b
# save the config file to linux build tree
mkdir build_dir
COMPILER_INSTALL_PATH=$HOME/0day COMPILER=clang make.cross W=1 O=build_dir ARCH=x86_64 SHELL=/bin/bash drivers/media/cec/platform/seco/ drivers/net/ethernet/cavium/thunder/ drivers/net/wireless/ath/ drivers/nvme/host/
If you fix the issue, kindly add following tag as appropriate
Reported-by: kernel test robot <lkp@intel.com>
All warnings (new ones prefixed by >>):
>> drivers/nvme/host/nvme-debug.c:148:5: warning: no previous prototype for function 'nvme_debug_reg_read64' [-Wmissing-prototypes]
int nvme_debug_reg_read64(struct nvme_ctrl *nctrl, u32 off, u64 *val)
^
drivers/nvme/host/nvme-debug.c:148:1: note: declare 'static' if the function is not intended to be used outside of this translation unit
int nvme_debug_reg_read64(struct nvme_ctrl *nctrl, u32 off, u64 *val)
^
static
>> drivers/nvme/host/nvme-debug.c:163:5: warning: no previous prototype for function 'nvme_debug_reg_write32' [-Wmissing-prototypes]
int nvme_debug_reg_write32(struct nvme_ctrl *nctrl, u32 off, u32 val)
^
drivers/nvme/host/nvme-debug.c:163:1: note: declare 'static' if the function is not intended to be used outside of this translation unit
int nvme_debug_reg_write32(struct nvme_ctrl *nctrl, u32 off, u32 val)
^
static
>> drivers/nvme/host/nvme-debug.c:758:6: warning: variable 'r' is used uninitialized whenever 'if' condition is true [-Wsometimes-uninitialized]
if (!ctrl->io_wq)
^~~~~~~~~~~~
drivers/nvme/host/nvme-debug.c:804:17: note: uninitialized use occurs here
return ERR_PTR(r);
^
drivers/nvme/host/nvme-debug.c:758:2: note: remove the 'if' if its condition is always false
if (!ctrl->io_wq)
^~~~~~~~~~~~~~~~~
drivers/nvme/host/nvme-debug.c:754:6: warning: variable 'r' is used uninitialized whenever 'if' condition is true [-Wsometimes-uninitialized]
if (!ctrl->admin_wq)
^~~~~~~~~~~~~~~
drivers/nvme/host/nvme-debug.c:804:17: note: uninitialized use occurs here
return ERR_PTR(r);
^
drivers/nvme/host/nvme-debug.c:754:2: note: remove the 'if' if its condition is always false
if (!ctrl->admin_wq)
^~~~~~~~~~~~~~~~~~~~
drivers/nvme/host/nvme-debug.c:738:7: note: initialize the variable 'r' to silence this warning
int r;
^
= 0
4 warnings generated.
vim +/nvme_debug_reg_read64 +148 drivers/nvme/host/nvme-debug.c
147
> 148 int nvme_debug_reg_read64(struct nvme_ctrl *nctrl, u32 off, u64 *val)
149 {
150 switch (off) {
151 case NVME_REG_CAP: {
152 *val = (1ULL << 0) | (1ULL << 37);
153 break;
154 }
155 default: {
156 printk("nvme_debug_reg_read64: %x\n", off);
157 return -ENOSYS;
158 }
159 }
160 return 0;
161 }
162
> 163 int nvme_debug_reg_write32(struct nvme_ctrl *nctrl, u32 off, u32 val)
164 {
165 struct nvme_debug_ctrl *ctrl = to_debug_ctrl(nctrl);
166 switch (off) {
167 case NVME_REG_CC: {
168 ctrl->reg_cc = val;
169 break;
170 }
171 default: {
172 printk("nvme_debug_reg_write32: %x, %x\n", off, val);
173 return -ENOSYS;
174 }
175 }
176 return 0;
177 }
178
---
0-DAY CI Kernel Test Service, Intel Corporation
https://lists.01.org/hyperkitty/list/kbuild-all@lists.01.org
^ permalink raw reply [flat|nested] 272+ messages in thread* Re: [RFC PATCH 3/3] nvme: add the "debug" host driver
@ 2022-02-02 7:23 ` kernel test robot
0 siblings, 0 replies; 272+ messages in thread
From: kernel test robot @ 2022-02-02 7:23 UTC (permalink / raw)
To: kbuild-all
[-- Attachment #1: Type: text/plain, Size: 4945 bytes --]
Hi Mikulas,
[FYI, it's a private test report for your RFC patch.]
[auto build test WARNING on axboe-block/for-next]
[also build test WARNING on linus/master v5.17-rc2 next-20220202]
[cannot apply to linux-nvme/for-next]
[If your patch is applied to the wrong git tree, kindly drop us a note.
And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch]
url: https://github.com/0day-ci/linux/commits/Mikulas-Patocka/block-add-copy-offload-support/20220202-033318
base: https://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux-block.git for-next
config: x86_64-allmodconfig (https://download.01.org/0day-ci/archive/20220202/202202021549.3g79sGNE-lkp(a)intel.com/config)
compiler: clang version 14.0.0 (https://github.com/llvm/llvm-project 6b1e844b69f15bb7dffaf9365cd2b355d2eb7579)
reproduce (this is a W=1 build):
wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
chmod +x ~/bin/make.cross
# https://github.com/0day-ci/linux/commit/b59e9d971770c50aaac1d07d6edaa10a4a47171b
git remote add linux-review https://github.com/0day-ci/linux
git fetch --no-tags linux-review Mikulas-Patocka/block-add-copy-offload-support/20220202-033318
git checkout b59e9d971770c50aaac1d07d6edaa10a4a47171b
# save the config file to linux build tree
mkdir build_dir
COMPILER_INSTALL_PATH=$HOME/0day COMPILER=clang make.cross W=1 O=build_dir ARCH=x86_64 SHELL=/bin/bash drivers/media/cec/platform/seco/ drivers/net/ethernet/cavium/thunder/ drivers/net/wireless/ath/ drivers/nvme/host/
If you fix the issue, kindly add following tag as appropriate
Reported-by: kernel test robot <lkp@intel.com>
All warnings (new ones prefixed by >>):
>> drivers/nvme/host/nvme-debug.c:148:5: warning: no previous prototype for function 'nvme_debug_reg_read64' [-Wmissing-prototypes]
int nvme_debug_reg_read64(struct nvme_ctrl *nctrl, u32 off, u64 *val)
^
drivers/nvme/host/nvme-debug.c:148:1: note: declare 'static' if the function is not intended to be used outside of this translation unit
int nvme_debug_reg_read64(struct nvme_ctrl *nctrl, u32 off, u64 *val)
^
static
>> drivers/nvme/host/nvme-debug.c:163:5: warning: no previous prototype for function 'nvme_debug_reg_write32' [-Wmissing-prototypes]
int nvme_debug_reg_write32(struct nvme_ctrl *nctrl, u32 off, u32 val)
^
drivers/nvme/host/nvme-debug.c:163:1: note: declare 'static' if the function is not intended to be used outside of this translation unit
int nvme_debug_reg_write32(struct nvme_ctrl *nctrl, u32 off, u32 val)
^
static
>> drivers/nvme/host/nvme-debug.c:758:6: warning: variable 'r' is used uninitialized whenever 'if' condition is true [-Wsometimes-uninitialized]
if (!ctrl->io_wq)
^~~~~~~~~~~~
drivers/nvme/host/nvme-debug.c:804:17: note: uninitialized use occurs here
return ERR_PTR(r);
^
drivers/nvme/host/nvme-debug.c:758:2: note: remove the 'if' if its condition is always false
if (!ctrl->io_wq)
^~~~~~~~~~~~~~~~~
drivers/nvme/host/nvme-debug.c:754:6: warning: variable 'r' is used uninitialized whenever 'if' condition is true [-Wsometimes-uninitialized]
if (!ctrl->admin_wq)
^~~~~~~~~~~~~~~
drivers/nvme/host/nvme-debug.c:804:17: note: uninitialized use occurs here
return ERR_PTR(r);
^
drivers/nvme/host/nvme-debug.c:754:2: note: remove the 'if' if its condition is always false
if (!ctrl->admin_wq)
^~~~~~~~~~~~~~~~~~~~
drivers/nvme/host/nvme-debug.c:738:7: note: initialize the variable 'r' to silence this warning
int r;
^
= 0
4 warnings generated.
vim +/nvme_debug_reg_read64 +148 drivers/nvme/host/nvme-debug.c
147
> 148 int nvme_debug_reg_read64(struct nvme_ctrl *nctrl, u32 off, u64 *val)
149 {
150 switch (off) {
151 case NVME_REG_CAP: {
152 *val = (1ULL << 0) | (1ULL << 37);
153 break;
154 }
155 default: {
156 printk("nvme_debug_reg_read64: %x\n", off);
157 return -ENOSYS;
158 }
159 }
160 return 0;
161 }
162
> 163 int nvme_debug_reg_write32(struct nvme_ctrl *nctrl, u32 off, u32 val)
164 {
165 struct nvme_debug_ctrl *ctrl = to_debug_ctrl(nctrl);
166 switch (off) {
167 case NVME_REG_CC: {
168 ctrl->reg_cc = val;
169 break;
170 }
171 default: {
172 printk("nvme_debug_reg_write32: %x, %x\n", off, val);
173 return -ENOSYS;
174 }
175 }
176 return 0;
177 }
178
---
0-DAY CI Kernel Test Service, Intel Corporation
https://lists.01.org/hyperkitty/list/kbuild-all(a)lists.01.org
^ permalink raw reply [flat|nested] 272+ messages in thread
* Re: [RFC PATCH 3/3] nvme: add the "debug" host driver
2022-02-01 18:33 ` [dm-devel] " Mikulas Patocka
@ 2022-02-02 8:00 ` Chaitanya Kulkarni
-1 siblings, 0 replies; 272+ messages in thread
From: Chaitanya Kulkarni @ 2022-02-02 8:00 UTC (permalink / raw)
To: Mikulas Patocka
Cc: linux-block, linux-scsi, dm-devel, linux-nvme,
Javier González, linux-fsdevel, Jens Axboe,
msnitzer@redhat.com >> msnitzer@redhat.com,
Bart Van Assche,
martin.petersen@oracle.com >> Martin K. Petersen, roland,
Hannes Reinecke, kbus @imap.gmail.com>> Keith Busch,
Christoph Hellwig, Frederick.Knight, zach.brown, osandov, lsf-pc,
djwong, josef, clm, dsterba, tytso, jack, Kanchan Joshi
Mikulas,
On 2/1/22 10:33 AM, Mikulas Patocka wrote:
> External email: Use caution opening links or attachments
>
>
> This patch adds a new driver "nvme-debug". It uses memory as a backing
> store and it is used to test the copy offload functionality.
>
> Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
>
NVMe Controller specific memory backed features needs to go into
QEMU which are targeted for testing and debugging, just like what
we have done for NVMe ZNS QEMU support and not in kernel.
I don't see any special reason to make copy offload an exception.
-ck
^ permalink raw reply [flat|nested] 272+ messages in thread
* Re: [dm-devel] [RFC PATCH 3/3] nvme: add the "debug" host driver
@ 2022-02-02 8:00 ` Chaitanya Kulkarni
0 siblings, 0 replies; 272+ messages in thread
From: Chaitanya Kulkarni @ 2022-02-02 8:00 UTC (permalink / raw)
To: Mikulas Patocka
Cc: djwong, linux-nvme, clm, dm-devel, osandov, Javier González,
Bart Van Assche, linux-scsi, Christoph Hellwig, roland,
zach.brown, msnitzer@redhat.com >> msnitzer@redhat.com,
josef, linux-block, dsterba,
kbus @imap.gmail.com>> Keith Busch, Frederick.Knight,
Axboe, tytso, Kanchan Joshi,
martin.petersen@oracle.com >> Martin K. Petersen, jack,
linux-fsdevel, lsf-pc
Mikulas,
On 2/1/22 10:33 AM, Mikulas Patocka wrote:
> External email: Use caution opening links or attachments
>
>
> This patch adds a new driver "nvme-debug". It uses memory as a backing
> store and it is used to test the copy offload functionality.
>
> Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
>
NVMe Controller specific memory backed features needs to go into
QEMU which are targeted for testing and debugging, just like what
we have done for NVMe ZNS QEMU support and not in kernel.
I don't see any special reason to make copy offload an exception.
-ck
--
dm-devel mailing list
dm-devel@redhat.com
https://listman.redhat.com/mailman/listinfo/dm-devel
^ permalink raw reply [flat|nested] 272+ messages in thread
* Re: [RFC PATCH 3/3] nvme: add the "debug" host driver
2022-02-02 8:00 ` [dm-devel] " Chaitanya Kulkarni
@ 2022-02-02 12:38 ` Klaus Jensen
-1 siblings, 0 replies; 272+ messages in thread
From: Klaus Jensen @ 2022-02-02 12:38 UTC (permalink / raw)
To: Chaitanya Kulkarni
Cc: Mikulas Patocka, linux-block, linux-scsi, dm-devel, linux-nvme,
Javier González, linux-fsdevel, Jens Axboe,
msnitzer@redhat.com >> msnitzer@redhat.com,
Bart Van Assche,
martin.petersen@oracle.com >> Martin K. Petersen, roland,
Hannes Reinecke, kbus @imap.gmail.com>> Keith Busch,
Christoph Hellwig, Frederick.Knight, zach.brown, osandov, lsf-pc,
djwong, josef, clm, dsterba, tytso, jack, Kanchan Joshi
[-- Attachment #1: Type: text/plain, Size: 751 bytes --]
On Feb 2 08:00, Chaitanya Kulkarni wrote:
> Mikulas,
>
> On 2/1/22 10:33 AM, Mikulas Patocka wrote:
> > External email: Use caution opening links or attachments
> >
> >
> > This patch adds a new driver "nvme-debug". It uses memory as a backing
> > store and it is used to test the copy offload functionality.
> >
> > Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
> >
>
>
> NVMe Controller specific memory backed features needs to go into
> QEMU which are targeted for testing and debugging, just like what
> we have done for NVMe ZNS QEMU support and not in kernel.
>
> I don't see any special reason to make copy offload an exception.
>
FWIW the emulated nvme device in QEMU already supports the Copy command.
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 488 bytes --]
^ permalink raw reply [flat|nested] 272+ messages in thread
* Re: [dm-devel] [RFC PATCH 3/3] nvme: add the "debug" host driver
@ 2022-02-02 12:38 ` Klaus Jensen
0 siblings, 0 replies; 272+ messages in thread
From: Klaus Jensen @ 2022-02-02 12:38 UTC (permalink / raw)
To: Chaitanya Kulkarni
Cc: djwong, linux-nvme, clm, dm-devel, osandov, Javier González,
Bart Van Assche, linux-scsi, Christoph Hellwig, roland,
zach.brown, dsterba,
msnitzer@redhat.com >> msnitzer@redhat.com, josef,
linux-block, Mikulas Patocka,
kbus @imap.gmail.com>> Keith Busch, Frederick.Knight,
Jens Axboe, tytso, Kanchan Joshi,
martin.petersen@oracle.com >> Martin K. Petersen, jack,
linux-fsdevel, lsf-pc
[-- Attachment #1.1: Type: text/plain, Size: 751 bytes --]
On Feb 2 08:00, Chaitanya Kulkarni wrote:
> Mikulas,
>
> On 2/1/22 10:33 AM, Mikulas Patocka wrote:
> > External email: Use caution opening links or attachments
> >
> >
> > This patch adds a new driver "nvme-debug". It uses memory as a backing
> > store and it is used to test the copy offload functionality.
> >
> > Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
> >
>
>
> NVMe Controller specific memory backed features needs to go into
> QEMU which are targeted for testing and debugging, just like what
> we have done for NVMe ZNS QEMU support and not in kernel.
>
> I don't see any special reason to make copy offload an exception.
>
FWIW the emulated nvme device in QEMU already supports the Copy command.
[-- Attachment #1.2: signature.asc --]
[-- Type: application/pgp-signature, Size: 488 bytes --]
[-- Attachment #2: Type: text/plain, Size: 97 bytes --]
--
dm-devel mailing list
dm-devel@redhat.com
https://listman.redhat.com/mailman/listinfo/dm-devel
^ permalink raw reply [flat|nested] 272+ messages in thread
* Re: [RFC PATCH 3/3] nvme: add the "debug" host driver
2022-02-02 8:00 ` [dm-devel] " Chaitanya Kulkarni
@ 2022-02-03 15:38 ` Luis Chamberlain
-1 siblings, 0 replies; 272+ messages in thread
From: Luis Chamberlain @ 2022-02-03 15:38 UTC (permalink / raw)
To: Chaitanya Kulkarni
Cc: Mikulas Patocka, linux-block, linux-scsi, dm-devel, linux-nvme,
Javier González, linux-fsdevel, Jens Axboe,
msnitzer@redhat.com >> msnitzer@redhat.com,
Bart Van Assche,
martin.petersen@oracle.com >> Martin K. Petersen, roland,
Hannes Reinecke, kbus @imap.gmail.com>> Keith Busch,
Christoph Hellwig, Frederick.Knight, zach.brown, osandov, lsf-pc,
djwong, josef, clm, dsterba, tytso, jack, Kanchan Joshi
On Wed, Feb 02, 2022 at 08:00:12AM +0000, Chaitanya Kulkarni wrote:
> Mikulas,
>
> On 2/1/22 10:33 AM, Mikulas Patocka wrote:
> > External email: Use caution opening links or attachments
> >
> >
> > This patch adds a new driver "nvme-debug". It uses memory as a backing
> > store and it is used to test the copy offload functionality.
> >
> > Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
> >
>
>
> NVMe Controller specific memory backed features needs to go into
> QEMU which are targeted for testing and debugging, just like what
> we have done for NVMe ZNS QEMU support and not in kernel.
>
> I don't see any special reason to make copy offload an exception.
One can instantiate scsi devices with qemu by using fake scsi devices,
but one can also just use scsi_debug to do the same. I see both efforts
as desirable, so long as someone mantains this.
For instance, blktests uses scsi_debug for simplicity.
In the end you decide what you want to use.
Luis
^ permalink raw reply [flat|nested] 272+ messages in thread
* Re: [dm-devel] [RFC PATCH 3/3] nvme: add the "debug" host driver
@ 2022-02-03 15:38 ` Luis Chamberlain
0 siblings, 0 replies; 272+ messages in thread
From: Luis Chamberlain @ 2022-02-03 15:38 UTC (permalink / raw)
To: Chaitanya Kulkarni
Cc: djwong, linux-nvme, clm, dm-devel, osandov, Javier González,
Bart Van Assche, linux-scsi, Christoph Hellwig, roland,
zach.brown, dsterba,
msnitzer@redhat.com >> msnitzer@redhat.com, josef,
linux-block, Mikulas Patocka,
kbus @imap.gmail.com>> Keith Busch, Frederick.Knight,
Jens Axboe, tytso, Kanchan Joshi,
martin.petersen@oracle.com >> Martin K. Petersen, jack,
linux-fsdevel, lsf-pc
On Wed, Feb 02, 2022 at 08:00:12AM +0000, Chaitanya Kulkarni wrote:
> Mikulas,
>
> On 2/1/22 10:33 AM, Mikulas Patocka wrote:
> > External email: Use caution opening links or attachments
> >
> >
> > This patch adds a new driver "nvme-debug". It uses memory as a backing
> > store and it is used to test the copy offload functionality.
> >
> > Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
> >
>
>
> NVMe Controller specific memory backed features needs to go into
> QEMU which are targeted for testing and debugging, just like what
> we have done for NVMe ZNS QEMU support and not in kernel.
>
> I don't see any special reason to make copy offload an exception.
One can instantiate scsi devices with qemu by using fake scsi devices,
but one can also just use scsi_debug to do the same. I see both efforts
as desirable, so long as someone mantains this.
For instance, blktests uses scsi_debug for simplicity.
In the end you decide what you want to use.
Luis
--
dm-devel mailing list
dm-devel@redhat.com
https://listman.redhat.com/mailman/listinfo/dm-devel
^ permalink raw reply [flat|nested] 272+ messages in thread
* Re: [RFC PATCH 3/3] nvme: add the "debug" host driver
2022-02-03 15:38 ` [dm-devel] " Luis Chamberlain
@ 2022-02-03 16:52 ` Keith Busch
-1 siblings, 0 replies; 272+ messages in thread
From: Keith Busch @ 2022-02-03 16:52 UTC (permalink / raw)
To: Luis Chamberlain
Cc: Chaitanya Kulkarni, Mikulas Patocka, linux-block, linux-scsi,
dm-devel, linux-nvme, Javier González, linux-fsdevel,
Jens Axboe, msnitzer@redhat.com >> msnitzer@redhat.com,
Bart Van Assche,
martin.petersen@oracle.com >> Martin K. Petersen, roland,
Hannes Reinecke, Christoph Hellwig, Frederick.Knight, zach.brown,
osandov, lsf-pc, djwong, josef, clm, dsterba, tytso, jack,
Kanchan Joshi
On Thu, Feb 03, 2022 at 07:38:43AM -0800, Luis Chamberlain wrote:
> On Wed, Feb 02, 2022 at 08:00:12AM +0000, Chaitanya Kulkarni wrote:
> > Mikulas,
> >
> > On 2/1/22 10:33 AM, Mikulas Patocka wrote:
> > > External email: Use caution opening links or attachments
> > >
> > >
> > > This patch adds a new driver "nvme-debug". It uses memory as a backing
> > > store and it is used to test the copy offload functionality.
> > >
> > > Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
> > >
> >
> >
> > NVMe Controller specific memory backed features needs to go into
> > QEMU which are targeted for testing and debugging, just like what
> > we have done for NVMe ZNS QEMU support and not in kernel.
> >
> > I don't see any special reason to make copy offload an exception.
>
> One can instantiate scsi devices with qemu by using fake scsi devices,
> but one can also just use scsi_debug to do the same. I see both efforts
> as desirable, so long as someone mantains this.
>
> For instance, blktests uses scsi_debug for simplicity.
>
> In the end you decide what you want to use.
Can we use the nvme-loop target instead?
^ permalink raw reply [flat|nested] 272+ messages in thread
* Re: [dm-devel] [RFC PATCH 3/3] nvme: add the "debug" host driver
@ 2022-02-03 16:52 ` Keith Busch
0 siblings, 0 replies; 272+ messages in thread
From: Keith Busch @ 2022-02-03 16:52 UTC (permalink / raw)
To: Luis Chamberlain
Cc: djwong, linux-nvme, clm, dm-devel, osandov,
msnitzer@redhat.com >> msnitzer@redhat.com,
Bart Van Assche, linux-scsi, Christoph Hellwig, roland,
zach.brown, Chaitanya Kulkarni, Javier González, josef,
linux-block, Mikulas Patocka, dsterba, Frederick.Knight,
Jens Axboe, tytso, Kanchan Joshi,
martin.petersen@oracle.com >> Martin K. Petersen, jack,
linux-fsdevel, lsf-pc
On Thu, Feb 03, 2022 at 07:38:43AM -0800, Luis Chamberlain wrote:
> On Wed, Feb 02, 2022 at 08:00:12AM +0000, Chaitanya Kulkarni wrote:
> > Mikulas,
> >
> > On 2/1/22 10:33 AM, Mikulas Patocka wrote:
> > > External email: Use caution opening links or attachments
> > >
> > >
> > > This patch adds a new driver "nvme-debug". It uses memory as a backing
> > > store and it is used to test the copy offload functionality.
> > >
> > > Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
> > >
> >
> >
> > NVMe Controller specific memory backed features needs to go into
> > QEMU which are targeted for testing and debugging, just like what
> > we have done for NVMe ZNS QEMU support and not in kernel.
> >
> > I don't see any special reason to make copy offload an exception.
>
> One can instantiate scsi devices with qemu by using fake scsi devices,
> but one can also just use scsi_debug to do the same. I see both efforts
> as desirable, so long as someone mantains this.
>
> For instance, blktests uses scsi_debug for simplicity.
>
> In the end you decide what you want to use.
Can we use the nvme-loop target instead?
--
dm-devel mailing list
dm-devel@redhat.com
https://listman.redhat.com/mailman/listinfo/dm-devel
^ permalink raw reply [flat|nested] 272+ messages in thread
* Re: [RFC PATCH 3/3] nvme: add the "debug" host driver
2022-02-03 16:52 ` [dm-devel] " Keith Busch
@ 2022-02-03 19:50 ` Adam Manzanares
-1 siblings, 0 replies; 272+ messages in thread
From: Adam Manzanares @ 2022-02-03 19:50 UTC (permalink / raw)
To: Keith Busch
Cc: Luis Chamberlain, Chaitanya Kulkarni, Mikulas Patocka,
linux-block, linux-scsi, dm-devel, linux-nvme,
Javier González, linux-fsdevel, Jens Axboe,
msnitzer@redhat.com >> msnitzer@redhat.com,
Bart Van Assche,
martin.petersen@oracle.com >> Martin K. Petersen, roland,
Hannes Reinecke, Christoph Hellwig, Frederick.Knight, zach.brown,
osandov, lsf-pc, djwong, josef, clm, dsterba, tytso, jack,
Kanchan Joshi
On Thu, Feb 03, 2022 at 08:52:38AM -0800, Keith Busch wrote:
> On Thu, Feb 03, 2022 at 07:38:43AM -0800, Luis Chamberlain wrote:
> > On Wed, Feb 02, 2022 at 08:00:12AM +0000, Chaitanya Kulkarni wrote:
> > > Mikulas,
> > >
> > > On 2/1/22 10:33 AM, Mikulas Patocka wrote:
> > > > External email: Use caution opening links or attachments
> > > >
> > > >
> > > > This patch adds a new driver "nvme-debug". It uses memory as a backing
> > > > store and it is used to test the copy offload functionality.
> > > >
> > > > Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
> > > >
> > >
> > >
> > > NVMe Controller specific memory backed features needs to go into
> > > QEMU which are targeted for testing and debugging, just like what
> > > we have done for NVMe ZNS QEMU support and not in kernel.
> > >
> > > I don't see any special reason to make copy offload an exception.
> >
> > One can instantiate scsi devices with qemu by using fake scsi devices,
> > but one can also just use scsi_debug to do the same. I see both efforts
> > as desirable, so long as someone mantains this.
> >
> > For instance, blktests uses scsi_debug for simplicity.
> >
> > In the end you decide what you want to use.
>
> Can we use the nvme-loop target instead?
I am advocating for this approach as well. It presentas a virtual nvme
controller already.
^ permalink raw reply [flat|nested] 272+ messages in thread
* Re: [dm-devel] [RFC PATCH 3/3] nvme: add the "debug" host driver
@ 2022-02-03 19:50 ` Adam Manzanares
0 siblings, 0 replies; 272+ messages in thread
From: Adam Manzanares @ 2022-02-03 19:50 UTC (permalink / raw)
To: Keith Busch
Cc: djwong, linux-nvme, clm, dm-devel, osandov,
msnitzer@redhat.com >> msnitzer@redhat.com, Assche,
linux-scsi, Christoph Hellwig, roland, zach.brown,
Chaitanya Kulkarni, Javier González, josef, linux-block,
Mikulas Patocka, dsterba, Frederick.Knight, Jens Axboe, tytso,
Kanchan Joshi,
martin.petersen@oracle.com >> Martin K. Petersen,
Luis Chamberlain, jack, linux-fsdevel, lsf-pc
On Thu, Feb 03, 2022 at 08:52:38AM -0800, Keith Busch wrote:
> On Thu, Feb 03, 2022 at 07:38:43AM -0800, Luis Chamberlain wrote:
> > On Wed, Feb 02, 2022 at 08:00:12AM +0000, Chaitanya Kulkarni wrote:
> > > Mikulas,
> > >
> > > On 2/1/22 10:33 AM, Mikulas Patocka wrote:
> > > > External email: Use caution opening links or attachments
> > > >
> > > >
> > > > This patch adds a new driver "nvme-debug". It uses memory as a backing
> > > > store and it is used to test the copy offload functionality.
> > > >
> > > > Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
> > > >
> > >
> > >
> > > NVMe Controller specific memory backed features needs to go into
> > > QEMU which are targeted for testing and debugging, just like what
> > > we have done for NVMe ZNS QEMU support and not in kernel.
> > >
> > > I don't see any special reason to make copy offload an exception.
> >
> > One can instantiate scsi devices with qemu by using fake scsi devices,
> > but one can also just use scsi_debug to do the same. I see both efforts
> > as desirable, so long as someone mantains this.
> >
> > For instance, blktests uses scsi_debug for simplicity.
> >
> > In the end you decide what you want to use.
>
> Can we use the nvme-loop target instead?
I am advocating for this approach as well. It presentas a virtual nvme
controller already.
--
dm-devel mailing list
dm-devel@redhat.com
https://listman.redhat.com/mailman/listinfo/dm-devel
^ permalink raw reply [flat|nested] 272+ messages in thread
* Re: [RFC PATCH 3/3] nvme: add the "debug" host driver
2022-02-03 19:50 ` [dm-devel] " Adam Manzanares
@ 2022-02-04 3:12 ` Chaitanya Kulkarni
-1 siblings, 0 replies; 272+ messages in thread
From: Chaitanya Kulkarni @ 2022-02-04 3:12 UTC (permalink / raw)
To: Adam Manzanares
Cc: Luis Chamberlain, Mikulas Patocka, linux-block, Keith Busch,
linux-scsi, dm-devel, linux-nvme, Javier González,
linux-fsdevel, Jens Axboe,
msnitzer@redhat.com >> msnitzer@redhat.com,
Bart Van Assche,
martin.petersen@oracle.com >> Martin K. Petersen, roland,
Hannes Reinecke, Christoph Hellwig, Frederick.Knight, zach.brown,
osandov, lsf-pc, djwong, josef, clm, dsterba, tytso, jack,
Kanchan Joshi
>>> One can instantiate scsi devices with qemu by using fake scsi devices,
>>> but one can also just use scsi_debug to do the same. I see both efforts
>>> as desirable, so long as someone mantains this.
>>>
Why do you think both efforts are desirable ?
NVMe ZNS QEMU implementation proved to be perfect and works just
fine for testing, copy offload is not an exception.
>>> For instance, blktests uses scsi_debug for simplicity.
>>>
>>> In the end you decide what you want to use.
>>
>> Can we use the nvme-loop target instead?
>
> I am advocating for this approach as well. It presentas a virtual nvme
> controller already.
>
It does that assuming underlying block device such as null_blk or
QEMU implementation supports required features not to bloat the the
NVMeOF target.
-ck
^ permalink raw reply [flat|nested] 272+ messages in thread
* Re: [dm-devel] [RFC PATCH 3/3] nvme: add the "debug" host driver
@ 2022-02-04 3:12 ` Chaitanya Kulkarni
0 siblings, 0 replies; 272+ messages in thread
From: Chaitanya Kulkarni @ 2022-02-04 3:12 UTC (permalink / raw)
To: Adam Manzanares
Cc: djwong, linux-nvme, clm, dm-devel, osandov, Javier González,
Bart Van Assche, linux-scsi, Christoph Hellwig, roland,
zach.brown, dsterba,
msnitzer@redhat.com >> msnitzer@redhat.com, josef,
linux-block, Mikulas Patocka, Keith Busch, Frederick.Knight,
Axboe, tytso, Kanchan Joshi,
martin.petersen@oracle.com >> Martin K. Petersen,
Luis Chamberlain, jack, linux-fsdevel, lsf-pc
>>> One can instantiate scsi devices with qemu by using fake scsi devices,
>>> but one can also just use scsi_debug to do the same. I see both efforts
>>> as desirable, so long as someone mantains this.
>>>
Why do you think both efforts are desirable ?
NVMe ZNS QEMU implementation proved to be perfect and works just
fine for testing, copy offload is not an exception.
>>> For instance, blktests uses scsi_debug for simplicity.
>>>
>>> In the end you decide what you want to use.
>>
>> Can we use the nvme-loop target instead?
>
> I am advocating for this approach as well. It presentas a virtual nvme
> controller already.
>
It does that assuming underlying block device such as null_blk or
QEMU implementation supports required features not to bloat the the
NVMeOF target.
-ck
--
dm-devel mailing list
dm-devel@redhat.com
https://listman.redhat.com/mailman/listinfo/dm-devel
^ permalink raw reply [flat|nested] 272+ messages in thread
* Re: [RFC PATCH 3/3] nvme: add the "debug" host driver
2022-02-04 3:12 ` [dm-devel] " Chaitanya Kulkarni
@ 2022-02-04 6:28 ` Damien Le Moal
-1 siblings, 0 replies; 272+ messages in thread
From: Damien Le Moal @ 2022-02-04 6:28 UTC (permalink / raw)
To: Chaitanya Kulkarni, Adam Manzanares
Cc: Luis Chamberlain, Mikulas Patocka, linux-block, Keith Busch,
linux-scsi, dm-devel, linux-nvme, Javier González,
linux-fsdevel, Jens Axboe,
msnitzer@redhat.com >> msnitzer@redhat.com,
Bart Van Assche,
martin.petersen@oracle.com >> Martin K. Petersen, roland,
Hannes Reinecke, Christoph Hellwig, Frederick.Knight, zach.brown,
osandov, lsf-pc, djwong, josef, clm, dsterba, tytso, jack,
Kanchan Joshi
On 2/4/22 12:12, Chaitanya Kulkarni wrote:
>
>>>> One can instantiate scsi devices with qemu by using fake scsi devices,
>>>> but one can also just use scsi_debug to do the same. I see both efforts
>>>> as desirable, so long as someone mantains this.
>>>>
>
> Why do you think both efforts are desirable ?
When testing code using the functionality, it is far easier to get said
functionality doing a simple "modprobe" rather than having to setup a
VM. C.f. running blktests or fstests.
So personally, I also think it would be great to have a kernel-based
emulation of copy offload. And that should be very easy to implement
with the fabric code. Then loopback onto a nullblk device and you get a
quick and easy to setup copy-offload device that can even be of the ZNS
variant if you want since nullblk supports zones.
>
> NVMe ZNS QEMU implementation proved to be perfect and works just
> fine for testing, copy offload is not an exception.
>
>>>> For instance, blktests uses scsi_debug for simplicity.
>>>>
>>>> In the end you decide what you want to use.
>>>
>>> Can we use the nvme-loop target instead?
>>
>> I am advocating for this approach as well. It presentas a virtual nvme
>> controller already.
>>
>
> It does that assuming underlying block device such as null_blk or
> QEMU implementation supports required features not to bloat the the
> NVMeOF target.
>
> -ck
>
>
--
Damien Le Moal
Western Digital Research
^ permalink raw reply [flat|nested] 272+ messages in thread
* Re: [dm-devel] [RFC PATCH 3/3] nvme: add the "debug" host driver
@ 2022-02-04 6:28 ` Damien Le Moal
0 siblings, 0 replies; 272+ messages in thread
From: Damien Le Moal @ 2022-02-04 6:28 UTC (permalink / raw)
To: Chaitanya Kulkarni, Adam Manzanares
Cc: djwong, linux-nvme, clm, dm-devel, osandov, Javier González,
Bart Van Assche, linux-scsi, Christoph Hellwig, roland,
zach.brown, dsterba,
msnitzer@redhat.com >> msnitzer@redhat.com, josef,
linux-block, Mikulas Patocka, Keith Busch, Frederick.Knight,
Jens Axboe, tytso, Kanchan Joshi,
martin.petersen@oracle.com >> Martin K. Petersen,
Luis Chamberlain, jack, linux-fsdevel, lsf-pc
On 2/4/22 12:12, Chaitanya Kulkarni wrote:
>
>>>> One can instantiate scsi devices with qemu by using fake scsi devices,
>>>> but one can also just use scsi_debug to do the same. I see both efforts
>>>> as desirable, so long as someone mantains this.
>>>>
>
> Why do you think both efforts are desirable ?
When testing code using the functionality, it is far easier to get said
functionality doing a simple "modprobe" rather than having to setup a
VM. C.f. running blktests or fstests.
So personally, I also think it would be great to have a kernel-based
emulation of copy offload. And that should be very easy to implement
with the fabric code. Then loopback onto a nullblk device and you get a
quick and easy to setup copy-offload device that can even be of the ZNS
variant if you want since nullblk supports zones.
>
> NVMe ZNS QEMU implementation proved to be perfect and works just
> fine for testing, copy offload is not an exception.
>
>>>> For instance, blktests uses scsi_debug for simplicity.
>>>>
>>>> In the end you decide what you want to use.
>>>
>>> Can we use the nvme-loop target instead?
>>
>> I am advocating for this approach as well. It presentas a virtual nvme
>> controller already.
>>
>
> It does that assuming underlying block device such as null_blk or
> QEMU implementation supports required features not to bloat the the
> NVMeOF target.
>
> -ck
>
>
--
Damien Le Moal
Western Digital Research
--
dm-devel mailing list
dm-devel@redhat.com
https://listman.redhat.com/mailman/listinfo/dm-devel
^ permalink raw reply [flat|nested] 272+ messages in thread
* Re: [RFC PATCH 3/3] nvme: add the "debug" host driver
2022-02-04 6:28 ` [dm-devel] " Damien Le Moal
@ 2022-02-04 7:58 ` Chaitanya Kulkarni
-1 siblings, 0 replies; 272+ messages in thread
From: Chaitanya Kulkarni @ 2022-02-04 7:58 UTC (permalink / raw)
To: Damien Le Moal
Cc: Luis Chamberlain, Mikulas Patocka, linux-block, Keith Busch,
Adam Manzanares, linux-scsi, dm-devel, linux-nvme,
Javier González, linux-fsdevel, Jens Axboe,
msnitzer@redhat.com >> msnitzer@redhat.com,
Bart Van Assche,
martin.petersen@oracle.com >> Martin K. Petersen, roland,
Hannes Reinecke, Christoph Hellwig, Frederick.Knight, zach.brown,
osandov, lsf-pc, djwong, josef, clm, dsterba, tytso, jack,
Kanchan Joshi
On 2/3/22 22:28, Damien Le Moal wrote:
> On 2/4/22 12:12, Chaitanya Kulkarni wrote:
>>
>>>>> One can instantiate scsi devices with qemu by using fake scsi devices,
>>>>> but one can also just use scsi_debug to do the same. I see both efforts
>>>>> as desirable, so long as someone mantains this.
>>>>>
>>
>> Why do you think both efforts are desirable ?
>
> When testing code using the functionality, it is far easier to get said
> functionality doing a simple "modprobe" rather than having to setup a
> VM. C.f. running blktests or fstests.
>
agree on simplicity but then why do we have QEMU implementations for
the NVMe features (e.g. ZNS, NVMe Simple Copy) ? we can just build
memoery backed NVMeOF test target for NVMe controller features.
Also, recognizing the simplicity I proposed initially NVMe ZNS
fabrics based emulation over QEMU (I think I still have initial state
machine implementation code for ZNS somewhere), those were "nacked" for
the right reason, since we've decided go with QEMU and use that as a
primary platform for testing, so I failed to understand what has
changed.. since given that QEMU already supports NVMe simple copy ...
> So personally, I also think it would be great to have a kernel-based
> emulation of copy offload. And that should be very easy to implement
> with the fabric code. Then loopback onto a nullblk device and you get a
> quick and easy to setup copy-offload device that can even be of the ZNS
> variant if you want since nullblk supports zones.
>
One can do that with creating null_blk based NVMeOF target namespace,
no need to emulate simple copy memory backed code in the fabrics
with nvme-loop.. it is as simple as inserting module and configuring
ns with nvmetcli once we have finalized the solution for copy offload.
If you remember, I already have patches for that...
>>
>> NVMe ZNS QEMU implementation proved to be perfect and works just
>> fine for testing, copy offload is not an exception.
>>
>>>>> For instance, blktests uses scsi_debug for simplicity.
>>>>>
>>>>> In the end you decide what you want to use.
>>>>
>>>> Can we use the nvme-loop target instead?
>>>
>>> I am advocating for this approach as well. It presentas a virtual nvme
>>> controller already.
>>>
>>
>> It does that assuming underlying block device such as null_blk or
>> QEMU implementation supports required features not to bloat the the
>> NVMeOF target.
>>
>> -ck
>>
-ck
^ permalink raw reply [flat|nested] 272+ messages in thread
* Re: [dm-devel] [RFC PATCH 3/3] nvme: add the "debug" host driver
@ 2022-02-04 7:58 ` Chaitanya Kulkarni
0 siblings, 0 replies; 272+ messages in thread
From: Chaitanya Kulkarni @ 2022-02-04 7:58 UTC (permalink / raw)
To: Damien Le Moal
Cc: djwong, linux-nvme, clm, dm-devel, Manzanares, osandov,
Javier González, Assche, linux-scsi, Christoph Hellwig,
roland, zach.brown, dsterba,
msnitzer@redhat.com >> msnitzer@redhat.com, josef,
linux-block, Mikulas Patocka, Keith Busch, Frederick.Knight,
Jens Axboe, tytso, Kanchan Joshi,
martin.petersen@oracle.com >> Martin K. Petersen,
Luis Chamberlain, jack, linux-fsdevel, lsf-pc
On 2/3/22 22:28, Damien Le Moal wrote:
> On 2/4/22 12:12, Chaitanya Kulkarni wrote:
>>
>>>>> One can instantiate scsi devices with qemu by using fake scsi devices,
>>>>> but one can also just use scsi_debug to do the same. I see both efforts
>>>>> as desirable, so long as someone mantains this.
>>>>>
>>
>> Why do you think both efforts are desirable ?
>
> When testing code using the functionality, it is far easier to get said
> functionality doing a simple "modprobe" rather than having to setup a
> VM. C.f. running blktests or fstests.
>
agree on simplicity but then why do we have QEMU implementations for
the NVMe features (e.g. ZNS, NVMe Simple Copy) ? we can just build
memoery backed NVMeOF test target for NVMe controller features.
Also, recognizing the simplicity I proposed initially NVMe ZNS
fabrics based emulation over QEMU (I think I still have initial state
machine implementation code for ZNS somewhere), those were "nacked" for
the right reason, since we've decided go with QEMU and use that as a
primary platform for testing, so I failed to understand what has
changed.. since given that QEMU already supports NVMe simple copy ...
> So personally, I also think it would be great to have a kernel-based
> emulation of copy offload. And that should be very easy to implement
> with the fabric code. Then loopback onto a nullblk device and you get a
> quick and easy to setup copy-offload device that can even be of the ZNS
> variant if you want since nullblk supports zones.
>
One can do that with creating null_blk based NVMeOF target namespace,
no need to emulate simple copy memory backed code in the fabrics
with nvme-loop.. it is as simple as inserting module and configuring
ns with nvmetcli once we have finalized the solution for copy offload.
If you remember, I already have patches for that...
>>
>> NVMe ZNS QEMU implementation proved to be perfect and works just
>> fine for testing, copy offload is not an exception.
>>
>>>>> For instance, blktests uses scsi_debug for simplicity.
>>>>>
>>>>> In the end you decide what you want to use.
>>>>
>>>> Can we use the nvme-loop target instead?
>>>
>>> I am advocating for this approach as well. It presentas a virtual nvme
>>> controller already.
>>>
>>
>> It does that assuming underlying block device such as null_blk or
>> QEMU implementation supports required features not to bloat the the
>> NVMeOF target.
>>
>> -ck
>>
-ck
--
dm-devel mailing list
dm-devel@redhat.com
https://listman.redhat.com/mailman/listinfo/dm-devel
^ permalink raw reply [flat|nested] 272+ messages in thread
* Re: [RFC PATCH 3/3] nvme: add the "debug" host driver
2022-02-04 7:58 ` [dm-devel] " Chaitanya Kulkarni
@ 2022-02-04 8:24 ` Javier González
-1 siblings, 0 replies; 272+ messages in thread
From: Javier González @ 2022-02-04 8:24 UTC (permalink / raw)
To: Chaitanya Kulkarni
Cc: Damien Le Moal, Luis Chamberlain, Mikulas Patocka, linux-block,
Keith Busch, Adam Manzanares, linux-scsi, dm-devel, linux-nvme,
linux-fsdevel, Jens Axboe,
msnitzer@redhat.com >> msnitzer@redhat.com,
Bart Van Assche,
martin.petersen@oracle.com >> Martin K. Petersen, roland,
Hannes Reinecke, Christoph Hellwig, Frederick.Knight, zach.brown,
osandov, lsf-pc, djwong, josef, clm, dsterba, tytso, jack,
Kanchan Joshi
On 04.02.2022 07:58, Chaitanya Kulkarni wrote:
>On 2/3/22 22:28, Damien Le Moal wrote:
>> On 2/4/22 12:12, Chaitanya Kulkarni wrote:
>>>
>>>>>> One can instantiate scsi devices with qemu by using fake scsi devices,
>>>>>> but one can also just use scsi_debug to do the same. I see both efforts
>>>>>> as desirable, so long as someone mantains this.
>>>>>>
>>>
>>> Why do you think both efforts are desirable ?
>>
>> When testing code using the functionality, it is far easier to get said
>> functionality doing a simple "modprobe" rather than having to setup a
>> VM. C.f. running blktests or fstests.
>>
>
>agree on simplicity but then why do we have QEMU implementations for
>the NVMe features (e.g. ZNS, NVMe Simple Copy) ? we can just build
>memoery backed NVMeOF test target for NVMe controller features.
>
>Also, recognizing the simplicity I proposed initially NVMe ZNS
>fabrics based emulation over QEMU (I think I still have initial state
>machine implementation code for ZNS somewhere), those were "nacked" for
>the right reason, since we've decided go with QEMU and use that as a
>primary platform for testing, so I failed to understand what has
>changed.. since given that QEMU already supports NVMe simple copy ...
I was not part of this conversation, but as I see it each approach give
a benefit. QEMU is fantastic for compliance testing and I am not sure
you get the same level of command analysis anywhere else; at least not
without writing dedicated code for this in a target.
This said, when we want to test for race conditions, QEMU is very slow.
For a software-only solution, we have experimented with something
similar to the nvme-debug code tha Mikulas is proposing. Adam pointed to
the nvme-loop target as an alternative and this seems to work pretty
nicely. I do not believe there should be many changes to support copy
offload using this.
So in my view having both is not replication and it gives more
flexibility for validation, which I believe it is always good.
>
>> So personally, I also think it would be great to have a kernel-based
>> emulation of copy offload. And that should be very easy to implement
>> with the fabric code. Then loopback onto a nullblk device and you get a
>> quick and easy to setup copy-offload device that can even be of the ZNS
>> variant if you want since nullblk supports zones.
>>
>
>One can do that with creating null_blk based NVMeOF target namespace,
>no need to emulate simple copy memory backed code in the fabrics
>with nvme-loop.. it is as simple as inserting module and configuring
>ns with nvmetcli once we have finalized the solution for copy offload.
>If you remember, I already have patches for that...
>
>>>
>>> NVMe ZNS QEMU implementation proved to be perfect and works just
>>> fine for testing, copy offload is not an exception.
>>>
>>>>>> For instance, blktests uses scsi_debug for simplicity.
>>>>>>
>>>>>> In the end you decide what you want to use.
>>>>>
>>>>> Can we use the nvme-loop target instead?
>>>>
>>>> I am advocating for this approach as well. It presentas a virtual nvme
>>>> controller already.
>>>>
>>>
>>> It does that assuming underlying block device such as null_blk or
>>> QEMU implementation supports required features not to bloat the the
>>> NVMeOF target.
>>>
>>> -ck
>>>
>
>-ck
>
^ permalink raw reply [flat|nested] 272+ messages in thread
* Re: [dm-devel] [RFC PATCH 3/3] nvme: add the "debug" host driver
@ 2022-02-04 8:24 ` Javier González
0 siblings, 0 replies; 272+ messages in thread
From: Javier González @ 2022-02-04 8:24 UTC (permalink / raw)
To: Chaitanya Kulkarni
Cc: djwong, linux-nvme, clm, dm-devel, Adam Manzanares, osandov,
msnitzer@redhat.com >> msnitzer@redhat.com,
Bart Van Assche, linux-scsi, Damien Le Moal, Christoph Hellwig,
roland, zach.brown, dsterba, josef, linux-block, Mikulas Patocka,
Keith Busch, Frederick.Knight, Jens Axboe, tytso, Kanchan Joshi,
martin.petersen@oracle.com >> Martin K. Petersen,
Luis Chamberlain, jack, linux-fsdevel, lsf-pc
On 04.02.2022 07:58, Chaitanya Kulkarni wrote:
>On 2/3/22 22:28, Damien Le Moal wrote:
>> On 2/4/22 12:12, Chaitanya Kulkarni wrote:
>>>
>>>>>> One can instantiate scsi devices with qemu by using fake scsi devices,
>>>>>> but one can also just use scsi_debug to do the same. I see both efforts
>>>>>> as desirable, so long as someone mantains this.
>>>>>>
>>>
>>> Why do you think both efforts are desirable ?
>>
>> When testing code using the functionality, it is far easier to get said
>> functionality doing a simple "modprobe" rather than having to setup a
>> VM. C.f. running blktests or fstests.
>>
>
>agree on simplicity but then why do we have QEMU implementations for
>the NVMe features (e.g. ZNS, NVMe Simple Copy) ? we can just build
>memoery backed NVMeOF test target for NVMe controller features.
>
>Also, recognizing the simplicity I proposed initially NVMe ZNS
>fabrics based emulation over QEMU (I think I still have initial state
>machine implementation code for ZNS somewhere), those were "nacked" for
>the right reason, since we've decided go with QEMU and use that as a
>primary platform for testing, so I failed to understand what has
>changed.. since given that QEMU already supports NVMe simple copy ...
I was not part of this conversation, but as I see it each approach give
a benefit. QEMU is fantastic for compliance testing and I am not sure
you get the same level of command analysis anywhere else; at least not
without writing dedicated code for this in a target.
This said, when we want to test for race conditions, QEMU is very slow.
For a software-only solution, we have experimented with something
similar to the nvme-debug code tha Mikulas is proposing. Adam pointed to
the nvme-loop target as an alternative and this seems to work pretty
nicely. I do not believe there should be many changes to support copy
offload using this.
So in my view having both is not replication and it gives more
flexibility for validation, which I believe it is always good.
>
>> So personally, I also think it would be great to have a kernel-based
>> emulation of copy offload. And that should be very easy to implement
>> with the fabric code. Then loopback onto a nullblk device and you get a
>> quick and easy to setup copy-offload device that can even be of the ZNS
>> variant if you want since nullblk supports zones.
>>
>
>One can do that with creating null_blk based NVMeOF target namespace,
>no need to emulate simple copy memory backed code in the fabrics
>with nvme-loop.. it is as simple as inserting module and configuring
>ns with nvmetcli once we have finalized the solution for copy offload.
>If you remember, I already have patches for that...
>
>>>
>>> NVMe ZNS QEMU implementation proved to be perfect and works just
>>> fine for testing, copy offload is not an exception.
>>>
>>>>>> For instance, blktests uses scsi_debug for simplicity.
>>>>>>
>>>>>> In the end you decide what you want to use.
>>>>>
>>>>> Can we use the nvme-loop target instead?
>>>>
>>>> I am advocating for this approach as well. It presentas a virtual nvme
>>>> controller already.
>>>>
>>>
>>> It does that assuming underlying block device such as null_blk or
>>> QEMU implementation supports required features not to bloat the the
>>> NVMeOF target.
>>>
>>> -ck
>>>
>
>-ck
>
--
dm-devel mailing list
dm-devel@redhat.com
https://listman.redhat.com/mailman/listinfo/dm-devel
^ permalink raw reply [flat|nested] 272+ messages in thread
* Re: [RFC PATCH 3/3] nvme: add the "debug" host driver
2022-02-04 8:24 ` [dm-devel] " Javier González
@ 2022-02-04 9:58 ` Chaitanya Kulkarni
-1 siblings, 0 replies; 272+ messages in thread
From: Chaitanya Kulkarni @ 2022-02-04 9:58 UTC (permalink / raw)
To: Javier González
Cc: Damien Le Moal, Luis Chamberlain, Mikulas Patocka, linux-block,
Keith Busch, Adam Manzanares, linux-scsi, dm-devel, linux-nvme,
linux-fsdevel, Jens Axboe,
msnitzer@redhat.com >> msnitzer@redhat.com,
Bart Van Assche,
martin.petersen@oracle.com >> Martin K. Petersen, roland,
Hannes Reinecke, Christoph Hellwig, Frederick.Knight, zach.brown,
osandov, lsf-pc, djwong, josef, clm, dsterba, tytso, jack,
Kanchan Joshi
On 2/4/22 12:24 AM, Javier González wrote:
> On 04.02.2022 07:58, Chaitanya Kulkarni wrote:
>> On 2/3/22 22:28, Damien Le Moal wrote:
>>> On 2/4/22 12:12, Chaitanya Kulkarni wrote:
>>>>
>>>>>>> One can instantiate scsi devices with qemu by using fake scsi
>>>>>>> devices,
>>>>>>> but one can also just use scsi_debug to do the same. I see both
>>>>>>> efforts
>>>>>>> as desirable, so long as someone mantains this.
>>>>>>>
>>>>
>>>> Why do you think both efforts are desirable ?
>>>
>>> When testing code using the functionality, it is far easier to get said
>>> functionality doing a simple "modprobe" rather than having to setup a
>>> VM. C.f. running blktests or fstests.
>>>
>>
>> agree on simplicity but then why do we have QEMU implementations for
>> the NVMe features (e.g. ZNS, NVMe Simple Copy) ? we can just build
>> memoery backed NVMeOF test target for NVMe controller features.
>>
>> Also, recognizing the simplicity I proposed initially NVMe ZNS
>> fabrics based emulation over QEMU (I think I still have initial state
>> machine implementation code for ZNS somewhere), those were "nacked" for
>> the right reason, since we've decided go with QEMU and use that as a
>> primary platform for testing, so I failed to understand what has
>> changed.. since given that QEMU already supports NVMe simple copy ...
>
> I was not part of this conversation, but as I see it each approach give
> a benefit. QEMU is fantastic for compliance testing and I am not sure
> you get the same level of command analysis anywhere else; at least not
> without writing dedicated code for this in a target.
>
> This said, when we want to test for race conditions, QEMU is very slow.
Can you please elaborate the scenario and numbers for slowness of QEMU?
For race conditions testing we can build error injection framework
around the code implementation which present in kernel everywhere.
> For a software-only solution, we have experimented with something
> similar to the nvme-debug code tha Mikulas is proposing. Adam pointed to
> the nvme-loop target as an alternative and this seems to work pretty
> nicely. I do not believe there should be many changes to support copy
> offload using this.
>
If QEMU is so incompetent then we need to add every big feature into
the NVMeOF test target so that we can test it better ? is that what
you are proposing ? since if we implement one feature, it will be
hard to nack any new features that ppl will come up with
same rationale "with QEMU being slow and hard to test race
conditions etc .."
and if that is the case why we don't have ZNS NVMeOF target
memory backed emulation ? Isn't that a bigger and more
complicated feature than Simple Copy where controller states
are involved with AENs ?
ZNS kernel code testing is also done on QEMU, I've also fixed
bugs in the ZNS kernel code which are discovered on QEMU and I've not
seen any issues with that. Given that simple copy feature is way smaller
than ZNS it will less likely to suffer from slowness and etc (listed
above) in QEMU.
my point is if we allow one, we will be opening floodgates and we need
to be careful not to bloat the code unless it is _absolutely
necessary_ which I don't think it is based on the simple copy
specification.
> So in my view having both is not replication and it gives more
> flexibility for validation, which I believe it is always good.
>
-ck
^ permalink raw reply [flat|nested] 272+ messages in thread
* Re: [dm-devel] [RFC PATCH 3/3] nvme: add the "debug" host driver
@ 2022-02-04 9:58 ` Chaitanya Kulkarni
0 siblings, 0 replies; 272+ messages in thread
From: Chaitanya Kulkarni @ 2022-02-04 9:58 UTC (permalink / raw)
To: Javier González
Cc: Bart, djwong, linux-nvme, clm, dm-devel, Adam Manzanares,
osandov, msnitzer@redhat.com >> msnitzer@redhat.com,
Assche, linux-scsi, Damien Le Moal, Christoph Hellwig, roland,
zach.brown, dsterba, josef, linux-block, Mikulas Patocka,
Keith Busch, Frederick.Knight, Jens Axboe, tytso, Kanchan Joshi,
martin.petersen@oracle.com >> Martin K. Petersen,
Luis Chamberlain, jack, linux-fsdevel, lsf-pc
On 2/4/22 12:24 AM, Javier González wrote:
> On 04.02.2022 07:58, Chaitanya Kulkarni wrote:
>> On 2/3/22 22:28, Damien Le Moal wrote:
>>> On 2/4/22 12:12, Chaitanya Kulkarni wrote:
>>>>
>>>>>>> One can instantiate scsi devices with qemu by using fake scsi
>>>>>>> devices,
>>>>>>> but one can also just use scsi_debug to do the same. I see both
>>>>>>> efforts
>>>>>>> as desirable, so long as someone mantains this.
>>>>>>>
>>>>
>>>> Why do you think both efforts are desirable ?
>>>
>>> When testing code using the functionality, it is far easier to get said
>>> functionality doing a simple "modprobe" rather than having to setup a
>>> VM. C.f. running blktests or fstests.
>>>
>>
>> agree on simplicity but then why do we have QEMU implementations for
>> the NVMe features (e.g. ZNS, NVMe Simple Copy) ? we can just build
>> memoery backed NVMeOF test target for NVMe controller features.
>>
>> Also, recognizing the simplicity I proposed initially NVMe ZNS
>> fabrics based emulation over QEMU (I think I still have initial state
>> machine implementation code for ZNS somewhere), those were "nacked" for
>> the right reason, since we've decided go with QEMU and use that as a
>> primary platform for testing, so I failed to understand what has
>> changed.. since given that QEMU already supports NVMe simple copy ...
>
> I was not part of this conversation, but as I see it each approach give
> a benefit. QEMU is fantastic for compliance testing and I am not sure
> you get the same level of command analysis anywhere else; at least not
> without writing dedicated code for this in a target.
>
> This said, when we want to test for race conditions, QEMU is very slow.
Can you please elaborate the scenario and numbers for slowness of QEMU?
For race conditions testing we can build error injection framework
around the code implementation which present in kernel everywhere.
> For a software-only solution, we have experimented with something
> similar to the nvme-debug code tha Mikulas is proposing. Adam pointed to
> the nvme-loop target as an alternative and this seems to work pretty
> nicely. I do not believe there should be many changes to support copy
> offload using this.
>
If QEMU is so incompetent then we need to add every big feature into
the NVMeOF test target so that we can test it better ? is that what
you are proposing ? since if we implement one feature, it will be
hard to nack any new features that ppl will come up with
same rationale "with QEMU being slow and hard to test race
conditions etc .."
and if that is the case why we don't have ZNS NVMeOF target
memory backed emulation ? Isn't that a bigger and more
complicated feature than Simple Copy where controller states
are involved with AENs ?
ZNS kernel code testing is also done on QEMU, I've also fixed
bugs in the ZNS kernel code which are discovered on QEMU and I've not
seen any issues with that. Given that simple copy feature is way smaller
than ZNS it will less likely to suffer from slowness and etc (listed
above) in QEMU.
my point is if we allow one, we will be opening floodgates and we need
to be careful not to bloat the code unless it is _absolutely
necessary_ which I don't think it is based on the simple copy
specification.
> So in my view having both is not replication and it gives more
> flexibility for validation, which I believe it is always good.
>
-ck
--
dm-devel mailing list
dm-devel@redhat.com
https://listman.redhat.com/mailman/listinfo/dm-devel
^ permalink raw reply [flat|nested] 272+ messages in thread
* Re: [RFC PATCH 3/3] nvme: add the "debug" host driver
2022-02-04 9:58 ` [dm-devel] " Chaitanya Kulkarni
@ 2022-02-04 11:34 ` Javier González
-1 siblings, 0 replies; 272+ messages in thread
From: Javier González @ 2022-02-04 11:34 UTC (permalink / raw)
To: Chaitanya Kulkarni
Cc: Damien Le Moal, Luis Chamberlain, Mikulas Patocka, linux-block,
Keith Busch, Adam Manzanares, linux-scsi, dm-devel, linux-nvme,
linux-fsdevel, Jens Axboe,
msnitzer@redhat.com >> msnitzer@redhat.com,
Bart Van Assche,
martin.petersen@oracle.com >> Martin K. Petersen, roland,
Hannes Reinecke, Christoph Hellwig, Frederick.Knight, zach.brown,
osandov, lsf-pc, djwong, josef, clm, dsterba, tytso, jack,
Kanchan Joshi
On 04.02.2022 09:58, Chaitanya Kulkarni wrote:
>On 2/4/22 12:24 AM, Javier González wrote:
>> On 04.02.2022 07:58, Chaitanya Kulkarni wrote:
>>> On 2/3/22 22:28, Damien Le Moal wrote:
>>>> On 2/4/22 12:12, Chaitanya Kulkarni wrote:
>>>>>
>>>>>>>> One can instantiate scsi devices with qemu by using fake scsi
>>>>>>>> devices,
>>>>>>>> but one can also just use scsi_debug to do the same. I see both
>>>>>>>> efforts
>>>>>>>> as desirable, so long as someone mantains this.
>>>>>>>>
>>>>>
>>>>> Why do you think both efforts are desirable ?
>>>>
>>>> When testing code using the functionality, it is far easier to get said
>>>> functionality doing a simple "modprobe" rather than having to setup a
>>>> VM. C.f. running blktests or fstests.
>>>>
>>>
>>> agree on simplicity but then why do we have QEMU implementations for
>>> the NVMe features (e.g. ZNS, NVMe Simple Copy) ? we can just build
>>> memoery backed NVMeOF test target for NVMe controller features.
>>>
>>> Also, recognizing the simplicity I proposed initially NVMe ZNS
>>> fabrics based emulation over QEMU (I think I still have initial state
>>> machine implementation code for ZNS somewhere), those were "nacked" for
>>> the right reason, since we've decided go with QEMU and use that as a
>>> primary platform for testing, so I failed to understand what has
>>> changed.. since given that QEMU already supports NVMe simple copy ...
>>
>> I was not part of this conversation, but as I see it each approach give
>> a benefit. QEMU is fantastic for compliance testing and I am not sure
>> you get the same level of command analysis anywhere else; at least not
>> without writing dedicated code for this in a target.
>>
>> This said, when we want to test for race conditions, QEMU is very slow.
>
>Can you please elaborate the scenario and numbers for slowness of QEMU?
QEMU is an emulator, not a simulator. So we will not be able to stress
the host stack in the same way the null_blk device does. If we want to
test code in the NVMe driver then we need a way to have the equivalent
to the null_blk in NVMe. It seems like the nvme-loop target can achieve
this.
Does this answer your concern?
>
>For race conditions testing we can build error injection framework
>around the code implementation which present in kernel everywhere.
True. This is also a good way to do this.
>
>> For a software-only solution, we have experimented with something
>> similar to the nvme-debug code tha Mikulas is proposing. Adam pointed to
>> the nvme-loop target as an alternative and this seems to work pretty
>> nicely. I do not believe there should be many changes to support copy
>> offload using this.
>>
>
>If QEMU is so incompetent then we need to add every big feature into
>the NVMeOF test target so that we can test it better ? is that what
>you are proposing ? since if we implement one feature, it will be
>hard to nack any new features that ppl will come up with
>same rationale "with QEMU being slow and hard to test race
>conditions etc .."
In my opinion, if people want this and is willing to maintain it, there
is a case for it.
>
>and if that is the case why we don't have ZNS NVMeOF target
>memory backed emulation ? Isn't that a bigger and more
>complicated feature than Simple Copy where controller states
>are involved with AENs ?
I think this is a good idea.
>
>ZNS kernel code testing is also done on QEMU, I've also fixed
>bugs in the ZNS kernel code which are discovered on QEMU and I've not
>seen any issues with that. Given that simple copy feature is way smaller
>than ZNS it will less likely to suffer from slowness and etc (listed
>above) in QEMU.
QEMU is super useful: it is easy and it help identifying many issues.
But it is for compliance, not for performance. There was an effort to
make FEMU, but this seems to be an abandoned project.
>
>my point is if we allow one, we will be opening floodgates and we need
>to be careful not to bloat the code unless it is _absolutely
>necessary_ which I don't think it is based on the simple copy
>specification.
I understand, and this is a very valid point. It seems like the
nvme-loop device can give a lot of what we need; all the necessary extra
logic can go into the null_blk and then we do not need NVMe specific
code.
Do you see any inconvenient with this approach?
>
>> So in my view having both is not replication and it gives more
>> flexibility for validation, which I believe it is always good.
>>
>
^ permalink raw reply [flat|nested] 272+ messages in thread
* Re: [dm-devel] [RFC PATCH 3/3] nvme: add the "debug" host driver
@ 2022-02-04 11:34 ` Javier González
0 siblings, 0 replies; 272+ messages in thread
From: Javier González @ 2022-02-04 11:34 UTC (permalink / raw)
To: Chaitanya Kulkarni
Cc: djwong, linux-nvme, clm, dm-devel, Adam Manzanares, osandov,
msnitzer@redhat.com >> msnitzer@redhat.com,
Bart Van Assche, linux-scsi, Damien Le Moal, Christoph Hellwig,
roland, zach.brown, dsterba, josef, linux-block, Mikulas Patocka,
Keith Busch, Frederick.Knight, Jens Axboe, tytso, Kanchan Joshi,
martin.petersen@oracle.com >> Martin K. Petersen,
Luis Chamberlain, jack, linux-fsdevel, lsf-pc
On 04.02.2022 09:58, Chaitanya Kulkarni wrote:
>On 2/4/22 12:24 AM, Javier González wrote:
>> On 04.02.2022 07:58, Chaitanya Kulkarni wrote:
>>> On 2/3/22 22:28, Damien Le Moal wrote:
>>>> On 2/4/22 12:12, Chaitanya Kulkarni wrote:
>>>>>
>>>>>>>> One can instantiate scsi devices with qemu by using fake scsi
>>>>>>>> devices,
>>>>>>>> but one can also just use scsi_debug to do the same. I see both
>>>>>>>> efforts
>>>>>>>> as desirable, so long as someone mantains this.
>>>>>>>>
>>>>>
>>>>> Why do you think both efforts are desirable ?
>>>>
>>>> When testing code using the functionality, it is far easier to get said
>>>> functionality doing a simple "modprobe" rather than having to setup a
>>>> VM. C.f. running blktests or fstests.
>>>>
>>>
>>> agree on simplicity but then why do we have QEMU implementations for
>>> the NVMe features (e.g. ZNS, NVMe Simple Copy) ? we can just build
>>> memoery backed NVMeOF test target for NVMe controller features.
>>>
>>> Also, recognizing the simplicity I proposed initially NVMe ZNS
>>> fabrics based emulation over QEMU (I think I still have initial state
>>> machine implementation code for ZNS somewhere), those were "nacked" for
>>> the right reason, since we've decided go with QEMU and use that as a
>>> primary platform for testing, so I failed to understand what has
>>> changed.. since given that QEMU already supports NVMe simple copy ...
>>
>> I was not part of this conversation, but as I see it each approach give
>> a benefit. QEMU is fantastic for compliance testing and I am not sure
>> you get the same level of command analysis anywhere else; at least not
>> without writing dedicated code for this in a target.
>>
>> This said, when we want to test for race conditions, QEMU is very slow.
>
>Can you please elaborate the scenario and numbers for slowness of QEMU?
QEMU is an emulator, not a simulator. So we will not be able to stress
the host stack in the same way the null_blk device does. If we want to
test code in the NVMe driver then we need a way to have the equivalent
to the null_blk in NVMe. It seems like the nvme-loop target can achieve
this.
Does this answer your concern?
>
>For race conditions testing we can build error injection framework
>around the code implementation which present in kernel everywhere.
True. This is also a good way to do this.
>
>> For a software-only solution, we have experimented with something
>> similar to the nvme-debug code tha Mikulas is proposing. Adam pointed to
>> the nvme-loop target as an alternative and this seems to work pretty
>> nicely. I do not believe there should be many changes to support copy
>> offload using this.
>>
>
>If QEMU is so incompetent then we need to add every big feature into
>the NVMeOF test target so that we can test it better ? is that what
>you are proposing ? since if we implement one feature, it will be
>hard to nack any new features that ppl will come up with
>same rationale "with QEMU being slow and hard to test race
>conditions etc .."
In my opinion, if people want this and is willing to maintain it, there
is a case for it.
>
>and if that is the case why we don't have ZNS NVMeOF target
>memory backed emulation ? Isn't that a bigger and more
>complicated feature than Simple Copy where controller states
>are involved with AENs ?
I think this is a good idea.
>
>ZNS kernel code testing is also done on QEMU, I've also fixed
>bugs in the ZNS kernel code which are discovered on QEMU and I've not
>seen any issues with that. Given that simple copy feature is way smaller
>than ZNS it will less likely to suffer from slowness and etc (listed
>above) in QEMU.
QEMU is super useful: it is easy and it help identifying many issues.
But it is for compliance, not for performance. There was an effort to
make FEMU, but this seems to be an abandoned project.
>
>my point is if we allow one, we will be opening floodgates and we need
>to be careful not to bloat the code unless it is _absolutely
>necessary_ which I don't think it is based on the simple copy
>specification.
I understand, and this is a very valid point. It seems like the
nvme-loop device can give a lot of what we need; all the necessary extra
logic can go into the null_blk and then we do not need NVMe specific
code.
Do you see any inconvenient with this approach?
>
>> So in my view having both is not replication and it gives more
>> flexibility for validation, which I believe it is always good.
>>
>
--
dm-devel mailing list
dm-devel@redhat.com
https://listman.redhat.com/mailman/listinfo/dm-devel
^ permalink raw reply [flat|nested] 272+ messages in thread
* Re: [RFC PATCH 3/3] nvme: add the "debug" host driver
2022-02-04 9:58 ` [dm-devel] " Chaitanya Kulkarni
@ 2022-02-04 14:15 ` Hannes Reinecke
-1 siblings, 0 replies; 272+ messages in thread
From: Hannes Reinecke @ 2022-02-04 14:15 UTC (permalink / raw)
To: Chaitanya Kulkarni, Javier González
Cc: Damien Le Moal, Luis Chamberlain, Mikulas Patocka, linux-block,
Keith Busch, Adam Manzanares, linux-scsi, dm-devel, linux-nvme,
linux-fsdevel, Jens Axboe,
msnitzer@redhat.com >> msnitzer@redhat.com,
Bart Van Assche,
martin.petersen@oracle.com >> Martin K. Petersen, roland,
Christoph Hellwig, Frederick.Knight, zach.brown, osandov, lsf-pc,
djwong, josef, clm, dsterba, tytso, jack, Kanchan Joshi
On 2/4/22 10:58, Chaitanya Kulkarni wrote:
> On 2/4/22 12:24 AM, Javier González wrote:
[ .. ]
>> For a software-only solution, we have experimented with something
>> similar to the nvme-debug code tha Mikulas is proposing. Adam pointed to
>> the nvme-loop target as an alternative and this seems to work pretty
>> nicely. I do not believe there should be many changes to support copy
>> offload using this.
>>
>
> If QEMU is so incompetent then we need to add every big feature into
> the NVMeOF test target so that we can test it better ? is that what
> you are proposing ? since if we implement one feature, it will be
> hard to nack any new features that ppl will come up with
> same rationale "with QEMU being slow and hard to test race
> conditions etc .."
>
How would you use qemu for bare-metal testing?
> and if that is the case why we don't have ZNS NVMeOF target
> memory backed emulation ? Isn't that a bigger and more
> complicated feature than Simple Copy where controller states
> are involved with AENs ?
>
> ZNS kernel code testing is also done on QEMU, I've also fixed
> bugs in the ZNS kernel code which are discovered on QEMU and I've not
> seen any issues with that. Given that simple copy feature is way smaller
> than ZNS it will less likely to suffer from slowness and etc (listed
> above) in QEMU.
>
> my point is if we allow one, we will be opening floodgates and we need
> to be careful not to bloat the code unless it is _absolutely
> necessary_ which I don't think it is based on the simple copy
> specification.
>
I do have a slightly different view on the nvme target code; it should
provide the necessary means to test the nvme host code.
And simple copy is on of these features, especially as it will operate
as an exploiter of the new functionality.
Cheers,
Hannes
--
Dr. Hannes Reinecke Kernel Storage Architect
hare@suse.de +49 911 74053 688
SUSE Software Solutions Germany GmbH, Maxfeldstr. 5, 90409 Nürnberg
HRB 36809 (AG Nürnberg), GF: Felix Imendörffer
^ permalink raw reply [flat|nested] 272+ messages in thread
* Re: [dm-devel] [RFC PATCH 3/3] nvme: add the "debug" host driver
@ 2022-02-04 14:15 ` Hannes Reinecke
0 siblings, 0 replies; 272+ messages in thread
From: Hannes Reinecke @ 2022-02-04 14:15 UTC (permalink / raw)
To: Chaitanya Kulkarni, Javier González
Cc: djwong, linux-nvme, clm, dm-devel, Adam Manzanares, osandov,
msnitzer@redhat.com >> msnitzer@redhat.com,
Bart Van Assche, linux-scsi, Damien Le Moal, Christoph Hellwig,
roland, zach.brown, dsterba, josef, linux-block, Mikulas Patocka,
Keith Busch, Frederick.Knight, Jens Axboe, tytso, Kanchan Joshi,
martin.petersen@oracle.com >> Martin K. Petersen,
Luis Chamberlain, jack, linux-fsdevel, lsf-pc
On 2/4/22 10:58, Chaitanya Kulkarni wrote:
> On 2/4/22 12:24 AM, Javier González wrote:
[ .. ]
>> For a software-only solution, we have experimented with something
>> similar to the nvme-debug code tha Mikulas is proposing. Adam pointed to
>> the nvme-loop target as an alternative and this seems to work pretty
>> nicely. I do not believe there should be many changes to support copy
>> offload using this.
>>
>
> If QEMU is so incompetent then we need to add every big feature into
> the NVMeOF test target so that we can test it better ? is that what
> you are proposing ? since if we implement one feature, it will be
> hard to nack any new features that ppl will come up with
> same rationale "with QEMU being slow and hard to test race
> conditions etc .."
>
How would you use qemu for bare-metal testing?
> and if that is the case why we don't have ZNS NVMeOF target
> memory backed emulation ? Isn't that a bigger and more
> complicated feature than Simple Copy where controller states
> are involved with AENs ?
>
> ZNS kernel code testing is also done on QEMU, I've also fixed
> bugs in the ZNS kernel code which are discovered on QEMU and I've not
> seen any issues with that. Given that simple copy feature is way smaller
> than ZNS it will less likely to suffer from slowness and etc (listed
> above) in QEMU.
>
> my point is if we allow one, we will be opening floodgates and we need
> to be careful not to bloat the code unless it is _absolutely
> necessary_ which I don't think it is based on the simple copy
> specification.
>
I do have a slightly different view on the nvme target code; it should
provide the necessary means to test the nvme host code.
And simple copy is on of these features, especially as it will operate
as an exploiter of the new functionality.
Cheers,
Hannes
--
Dr. Hannes Reinecke Kernel Storage Architect
hare@suse.de +49 911 74053 688
SUSE Software Solutions Germany GmbH, Maxfeldstr. 5, 90409 Nürnberg
HRB 36809 (AG Nürnberg), GF: Felix Imendörffer
--
dm-devel mailing list
dm-devel@redhat.com
https://listman.redhat.com/mailman/listinfo/dm-devel
^ permalink raw reply [flat|nested] 272+ messages in thread
* Re: [RFC PATCH 3/3] nvme: add the "debug" host driver
2022-02-04 14:15 ` [dm-devel] " Hannes Reinecke
@ 2022-02-04 14:24 ` Keith Busch
-1 siblings, 0 replies; 272+ messages in thread
From: Keith Busch @ 2022-02-04 14:24 UTC (permalink / raw)
To: Hannes Reinecke
Cc: Chaitanya Kulkarni, Javier González, Damien Le Moal,
Luis Chamberlain, Mikulas Patocka, linux-block, Adam Manzanares,
linux-scsi, dm-devel, linux-nvme, linux-fsdevel, Jens Axboe,
msnitzer@redhat.com >> msnitzer@redhat.com,
Bart Van Assche,
martin.petersen@oracle.com >> Martin K. Petersen, roland,
Christoph Hellwig, Frederick.Knight, zach.brown, osandov, lsf-pc,
djwong, josef, clm, dsterba, tytso, jack, Kanchan Joshi
On Fri, Feb 04, 2022 at 03:15:02PM +0100, Hannes Reinecke wrote:
> On 2/4/22 10:58, Chaitanya Kulkarni wrote:
>
> > and if that is the case why we don't have ZNS NVMeOF target
> > memory backed emulation ? Isn't that a bigger and more
> > complicated feature than Simple Copy where controller states
> > are involved with AENs ?
> >
> > ZNS kernel code testing is also done on QEMU, I've also fixed
> > bugs in the ZNS kernel code which are discovered on QEMU and I've not
> > seen any issues with that. Given that simple copy feature is way smaller
> > than ZNS it will less likely to suffer from slowness and etc (listed
> > above) in QEMU.
> >
> > my point is if we allow one, we will be opening floodgates and we need
> > to be careful not to bloat the code unless it is _absolutely
> > necessary_ which I don't think it is based on the simple copy
> > specification.
> >
>
> I do have a slightly different view on the nvme target code; it should
> provide the necessary means to test the nvme host code.
> And simple copy is on of these features, especially as it will operate as an
> exploiter of the new functionality.
The threshold to determine if the in-kernel fabrics target ought to
implement a feature should be if it's useful in a production.
Are users interested in copying data without using fabric bandwidth?
Yes.
Does anyone want a mocked up ZNS that has all the contraints and none of
the benefits? No.
^ permalink raw reply [flat|nested] 272+ messages in thread
* Re: [dm-devel] [RFC PATCH 3/3] nvme: add the "debug" host driver
@ 2022-02-04 14:24 ` Keith Busch
0 siblings, 0 replies; 272+ messages in thread
From: Keith Busch @ 2022-02-04 14:24 UTC (permalink / raw)
To: Hannes Reinecke
Cc: djwong, linux-nvme, clm, dm-devel, Adam Manzanares, osandov,
msnitzer@redhat.com >> msnitzer@redhat.com,
Bart Van Assche, linux-scsi, Damien Le Moal, Christoph Hellwig,
roland, zach.brown, Chaitanya Kulkarni, Javier González,
josef, linux-block, Mikulas Patocka, dsterba, Frederick.Knight,
Jens Axboe, tytso, Kanchan Joshi,
martin.petersen@oracle.com >> Martin K. Petersen,
Luis Chamberlain, jack, linux-fsdevel, lsf-pc
On Fri, Feb 04, 2022 at 03:15:02PM +0100, Hannes Reinecke wrote:
> On 2/4/22 10:58, Chaitanya Kulkarni wrote:
>
> > and if that is the case why we don't have ZNS NVMeOF target
> > memory backed emulation ? Isn't that a bigger and more
> > complicated feature than Simple Copy where controller states
> > are involved with AENs ?
> >
> > ZNS kernel code testing is also done on QEMU, I've also fixed
> > bugs in the ZNS kernel code which are discovered on QEMU and I've not
> > seen any issues with that. Given that simple copy feature is way smaller
> > than ZNS it will less likely to suffer from slowness and etc (listed
> > above) in QEMU.
> >
> > my point is if we allow one, we will be opening floodgates and we need
> > to be careful not to bloat the code unless it is _absolutely
> > necessary_ which I don't think it is based on the simple copy
> > specification.
> >
>
> I do have a slightly different view on the nvme target code; it should
> provide the necessary means to test the nvme host code.
> And simple copy is on of these features, especially as it will operate as an
> exploiter of the new functionality.
The threshold to determine if the in-kernel fabrics target ought to
implement a feature should be if it's useful in a production.
Are users interested in copying data without using fabric bandwidth?
Yes.
Does anyone want a mocked up ZNS that has all the contraints and none of
the benefits? No.
--
dm-devel mailing list
dm-devel@redhat.com
https://listman.redhat.com/mailman/listinfo/dm-devel
^ permalink raw reply [flat|nested] 272+ messages in thread
* Re: [RFC PATCH 3/3] nvme: add the "debug" host driver
2022-02-04 14:15 ` [dm-devel] " Hannes Reinecke
@ 2022-02-04 16:01 ` Christoph Hellwig
-1 siblings, 0 replies; 272+ messages in thread
From: Christoph Hellwig @ 2022-02-04 16:01 UTC (permalink / raw)
To: Hannes Reinecke
Cc: Chaitanya Kulkarni, Javier González, Damien Le Moal,
Luis Chamberlain, Mikulas Patocka, linux-block, Keith Busch,
Adam Manzanares, linux-scsi, dm-devel, linux-nvme, linux-fsdevel,
Jens Axboe, msnitzer@redhat.com >> msnitzer@redhat.com,
Bart Van Assche,
martin.petersen@oracle.com >> Martin K. Petersen, roland,
Christoph Hellwig, Frederick.Knight, zach.brown, osandov, lsf-pc,
djwong, josef, clm, dsterba, tytso, jack, Kanchan Joshi
On Fri, Feb 04, 2022 at 03:15:02PM +0100, Hannes Reinecke wrote:
>> ZNS kernel code testing is also done on QEMU, I've also fixed
>> bugs in the ZNS kernel code which are discovered on QEMU and I've not
>> seen any issues with that. Given that simple copy feature is way smaller
>> than ZNS it will less likely to suffer from slowness and etc (listed
>> above) in QEMU.
>>
>> my point is if we allow one, we will be opening floodgates and we need
>> to be careful not to bloat the code unless it is _absolutely
>> necessary_ which I don't think it is based on the simple copy
>> specification.
>>
>
> I do have a slightly different view on the nvme target code; it should
> provide the necessary means to test the nvme host code.
> And simple copy is on of these features, especially as it will operate as
> an exploiter of the new functionality.
Well, in general I'd like to have every useful feature supported in
nvmet, because it serves both testing and production. If a feature
isn't all that useful (and there are lots of those in nvme these days)
we don't need to support in nvmet, but probably neither in the host code.
^ permalink raw reply [flat|nested] 272+ messages in thread
* Re: [dm-devel] [RFC PATCH 3/3] nvme: add the "debug" host driver
@ 2022-02-04 16:01 ` Christoph Hellwig
0 siblings, 0 replies; 272+ messages in thread
From: Christoph Hellwig @ 2022-02-04 16:01 UTC (permalink / raw)
To: Hannes Reinecke
Cc: djwong, linux-nvme, clm, dm-devel, Adam Manzanares, osandov,
msnitzer@redhat.com >> msnitzer@redhat.com,
Bart Van Assche, linux-scsi, Damien Le Moal, Christoph Hellwig,
roland, zach.brown, dsterba, Chaitanya Kulkarni,
Javier González, josef, linux-block, Mikulas Patocka,
Keith Busch, Frederick.Knight, Jens Axboe, tytso, Kanchan Joshi,
martin.petersen@oracle.com >> Martin K. Petersen,
Luis Chamberlain, jack, linux-fsdevel, lsf-pc
On Fri, Feb 04, 2022 at 03:15:02PM +0100, Hannes Reinecke wrote:
>> ZNS kernel code testing is also done on QEMU, I've also fixed
>> bugs in the ZNS kernel code which are discovered on QEMU and I've not
>> seen any issues with that. Given that simple copy feature is way smaller
>> than ZNS it will less likely to suffer from slowness and etc (listed
>> above) in QEMU.
>>
>> my point is if we allow one, we will be opening floodgates and we need
>> to be careful not to bloat the code unless it is _absolutely
>> necessary_ which I don't think it is based on the simple copy
>> specification.
>>
>
> I do have a slightly different view on the nvme target code; it should
> provide the necessary means to test the nvme host code.
> And simple copy is on of these features, especially as it will operate as
> an exploiter of the new functionality.
Well, in general I'd like to have every useful feature supported in
nvmet, because it serves both testing and production. If a feature
isn't all that useful (and there are lots of those in nvme these days)
we don't need to support in nvmet, but probably neither in the host code.
--
dm-devel mailing list
dm-devel@redhat.com
https://listman.redhat.com/mailman/listinfo/dm-devel
^ permalink raw reply [flat|nested] 272+ messages in thread
* Re: [RFC PATCH 0/3] NVMe copy offload patches
2022-02-01 18:31 ` [dm-devel] " Mikulas Patocka
@ 2022-02-04 19:41 ` Nitesh Shetty
-1 siblings, 0 replies; 272+ messages in thread
From: Nitesh Shetty @ 2022-02-04 19:41 UTC (permalink / raw)
To: Mikulas Patocka
Cc: Javier González, Chaitanya Kulkarni, linux-block,
linux-scsi, dm-devel, linux-nvme, linux-fsdevel, Jens Axboe,
msnitzer@redhat.com >> msnitzer@redhat.com,
Bart Van Assche,
martin.petersen@oracle.com >> Martin K. Petersen, roland,
Hannes Reinecke, kbus @imap.gmail.com>> Keith Busch,
Christoph Hellwig, Frederick.Knight, zach.brown, osandov, lsf-pc,
djwong, josef, clm, dsterba, tytso, jack, Kanchan Joshi,
arnav.dawn, Nitesh Shetty
On Wed, Feb 2, 2022 at 12:23 PM Mikulas Patocka <mpatocka@redhat.com> wrote:
>
> Hi
>
> Here I'm submitting the first version of NVMe copy offload patches as a
> request for comment. They use the token-based approach as we discussed on
> the phone call.
>
> The first patch adds generic copy offload support to the block layer - it
> adds two new bio types (REQ_OP_COPY_READ_TOKEN and
> REQ_OP_COPY_WRITE_TOKEN) and a new ioctl BLKCOPY and a kernel function
> blkdev_issue_copy.
>
> The second patch adds copy offload support to the NVMe subsystem.
>
> The third patch implements a "nvme-debug" driver - it is similar to
> "scsi-debug", it simulates a nvme host controller, it keeps data in memory
> and it supports copy offload according to NVMe Command Set Specification
> 1.0a. (there are no hardware or software implementations supporting copy
> offload so far, so I implemented it in nvme-debug)
>
> TODO:
> * implement copy offload in device mapper linear target
> * implement copy offload in software NVMe target driver
We had a series that adds these two elements
https://github.com/nitesh-shetty/linux_copy_offload/tree/main/v1
Overall series supports –
1. Multi-source/destination interface(yes, it does add complexity
but GC use-case needs it)
2. Copy-emulation at block-layer
3. Dm-linear and dm-kcopyd support (for cases not requiring split)
4. Nvmet support (for block and file backend)
These patches definitely need more feedback. If links are hard to read,
we can send another RFC instead. But before that it would be great to have your
inputs on the path forward.
But before that it would be great to have your inputs on the path forward.
PS: The payload-scheme in your series is particularly interesting and
simplifying plumbing, so you might notice that above patches borrow that
> * make it possible to complete REQ_OP_COPY_WRITE_TOKEN bios asynchronously
Patch[0] support asynchronous copy write,if multi dst/src payload is sent.
[0] https://github.com/nitesh-shetty/linux_copy_offload/blob/main/v1/0003-block-Add-copy-offload-support-infrastructure.patch
-- Nitesh
^ permalink raw reply [flat|nested] 272+ messages in thread
* Re: [dm-devel] [RFC PATCH 0/3] NVMe copy offload patches
@ 2022-02-04 19:41 ` Nitesh Shetty
0 siblings, 0 replies; 272+ messages in thread
From: Nitesh Shetty @ 2022-02-04 19:41 UTC (permalink / raw)
To: Mikulas Patocka
Cc: djwong, linux-nvme, clm, dm-devel, osandov, Javier González,
Bart Van Assche, linux-scsi, Christoph Hellwig, roland,
Nitesh Shetty, zach.brown, Chaitanya Kulkarni,
msnitzer@redhat.com >> msnitzer@redhat.com, josef,
linux-block, dsterba, kbus @imap.gmail.com>> Keith Busch,
Frederick.Knight, Jens Axboe, tytso, Kanchan Joshi,
martin.petersen@oracle.com >> Martin K. Petersen,
arnav.dawn, jack, linux-fsdevel, lsf-pc
On Wed, Feb 2, 2022 at 12:23 PM Mikulas Patocka <mpatocka@redhat.com> wrote:
>
> Hi
>
> Here I'm submitting the first version of NVMe copy offload patches as a
> request for comment. They use the token-based approach as we discussed on
> the phone call.
>
> The first patch adds generic copy offload support to the block layer - it
> adds two new bio types (REQ_OP_COPY_READ_TOKEN and
> REQ_OP_COPY_WRITE_TOKEN) and a new ioctl BLKCOPY and a kernel function
> blkdev_issue_copy.
>
> The second patch adds copy offload support to the NVMe subsystem.
>
> The third patch implements a "nvme-debug" driver - it is similar to
> "scsi-debug", it simulates a nvme host controller, it keeps data in memory
> and it supports copy offload according to NVMe Command Set Specification
> 1.0a. (there are no hardware or software implementations supporting copy
> offload so far, so I implemented it in nvme-debug)
>
> TODO:
> * implement copy offload in device mapper linear target
> * implement copy offload in software NVMe target driver
We had a series that adds these two elements
https://github.com/nitesh-shetty/linux_copy_offload/tree/main/v1
Overall series supports –
1. Multi-source/destination interface(yes, it does add complexity
but GC use-case needs it)
2. Copy-emulation at block-layer
3. Dm-linear and dm-kcopyd support (for cases not requiring split)
4. Nvmet support (for block and file backend)
These patches definitely need more feedback. If links are hard to read,
we can send another RFC instead. But before that it would be great to have your
inputs on the path forward.
But before that it would be great to have your inputs on the path forward.
PS: The payload-scheme in your series is particularly interesting and
simplifying plumbing, so you might notice that above patches borrow that
> * make it possible to complete REQ_OP_COPY_WRITE_TOKEN bios asynchronously
Patch[0] support asynchronous copy write,if multi dst/src payload is sent.
[0] https://github.com/nitesh-shetty/linux_copy_offload/blob/main/v1/0003-block-Add-copy-offload-support-infrastructure.patch
-- Nitesh
--
dm-devel mailing list
dm-devel@redhat.com
https://listman.redhat.com/mailman/listinfo/dm-devel
^ permalink raw reply [flat|nested] 272+ messages in thread
[parent not found: <CGME20220207141901epcas5p162ec2387815be7a1fd67ce0ab7082119@epcas5p1.samsung.com>]
* [PATCH v2 00/10] Add Copy offload support
[not found] ` <CGME20220207141901epcas5p162ec2387815be7a1fd67ce0ab7082119@epcas5p1.samsung.com>
@ 2022-02-07 14:13 ` Nitesh Shetty
0 siblings, 0 replies; 272+ messages in thread
From: Nitesh Shetty @ 2022-02-07 14:13 UTC (permalink / raw)
To: mpatocka
Cc: javier, chaitanyak, linux-block, linux-scsi, dm-devel,
linux-nvme, linux-fsdevel, axboe, msnitzer, bvanassche,
martin.petersen, roland, hare, kbusch, hch, Frederick.Knight,
zach.brown, osandov, lsf-pc, djwong, josef, clm, dsterba, tytso,
jack, joshi.k, arnav.dawn, nj.shetty
The patch series covers the points discussed in November 2021 virtual call
[LSF/MM/BFP TOPIC] Storage: Copy Offload[0].
We have covered the Initial agreed requirements in this patchset.
Patchset borrows Mikulas's token based approach for 2 bdev
implementation.
This is on top of our previous patchset v1[1].
Overall series supports –
1. Driver
- NVMe Copy command (single NS), including support in nvme-target (for
block and file backend)
2. Block layer
- Block-generic copy (REQ_COPY flag), with interface accommodating
two block-devs, and multi-source/destination interface
- Emulation, when offload is natively absent
- dm-linear support (for cases not requiring split)
3. User-interface
- new ioctl
4. In-kernel user
- dm-kcopyd
[0] https://lore.kernel.org/linux-nvme/CA+1E3rJ7BZ7LjQXXTdX+-0Edz=zT14mmPGMiVCzUgB33C60tbQ@mail.gmail.com/
[1] https://lore.kernel.org/linux-block/20210817101423.12367-1-selvakuma.s1@samsung.com/
Arnav Dawn (1):
nvmet: add copy command support for bdev and file ns
Nitesh Shetty (6):
block: Introduce queue limits for copy-offload support
block: Add copy offload support infrastructure
block: Introduce a new ioctl for copy
block: add emulation for copy
dm: Add support for copy offload.
dm: Enable copy offload for dm-linear target
SelvaKumar S (3):
block: make bio_map_kern() non static
nvme: add copy support
dm kcopyd: use copy offload support
block/blk-lib.c | 335 ++++++++++++++++++++++++++++++
block/blk-map.c | 2 +-
block/blk-settings.c | 6 +
block/blk-sysfs.c | 51 +++++
block/blk.h | 2 +
block/ioctl.c | 37 ++++
drivers/md/dm-kcopyd.c | 57 ++++-
drivers/md/dm-linear.c | 1 +
drivers/md/dm-table.c | 43 ++++
drivers/md/dm.c | 6 +
drivers/nvme/host/core.c | 121 ++++++++++-
drivers/nvme/host/nvme.h | 7 +
drivers/nvme/host/pci.c | 9 +
drivers/nvme/host/trace.c | 19 ++
drivers/nvme/target/admin-cmd.c | 8 +-
drivers/nvme/target/io-cmd-bdev.c | 66 ++++++
drivers/nvme/target/io-cmd-file.c | 48 +++++
include/linux/blk_types.h | 20 ++
include/linux/blkdev.h | 17 ++
include/linux/device-mapper.h | 5 +
include/linux/nvme.h | 43 +++-
include/uapi/linux/fs.h | 23 ++
22 files changed, 912 insertions(+), 14 deletions(-)
--
2.30.0-rc0
^ permalink raw reply [flat|nested] 272+ messages in thread* [dm-devel] [PATCH v2 00/10] Add Copy offload support
@ 2022-02-07 14:13 ` Nitesh Shetty
0 siblings, 0 replies; 272+ messages in thread
From: Nitesh Shetty @ 2022-02-07 14:13 UTC (permalink / raw)
To: mpatocka
Cc: djwong, linux-nvme, clm, dm-devel, osandov, javier, bvanassche,
linux-scsi, hch, roland, nj.shetty, zach.brown, chaitanyak,
msnitzer, josef, linux-block, dsterba, kbusch, Frederick.Knight,
axboe, tytso, joshi.k, martin.petersen, arnav.dawn, jack,
linux-fsdevel, lsf-pc
The patch series covers the points discussed in November 2021 virtual call
[LSF/MM/BFP TOPIC] Storage: Copy Offload[0].
We have covered the Initial agreed requirements in this patchset.
Patchset borrows Mikulas's token based approach for 2 bdev
implementation.
This is on top of our previous patchset v1[1].
Overall series supports –
1. Driver
- NVMe Copy command (single NS), including support in nvme-target (for
block and file backend)
2. Block layer
- Block-generic copy (REQ_COPY flag), with interface accommodating
two block-devs, and multi-source/destination interface
- Emulation, when offload is natively absent
- dm-linear support (for cases not requiring split)
3. User-interface
- new ioctl
4. In-kernel user
- dm-kcopyd
[0] https://lore.kernel.org/linux-nvme/CA+1E3rJ7BZ7LjQXXTdX+-0Edz=zT14mmPGMiVCzUgB33C60tbQ@mail.gmail.com/
[1] https://lore.kernel.org/linux-block/20210817101423.12367-1-selvakuma.s1@samsung.com/
Arnav Dawn (1):
nvmet: add copy command support for bdev and file ns
Nitesh Shetty (6):
block: Introduce queue limits for copy-offload support
block: Add copy offload support infrastructure
block: Introduce a new ioctl for copy
block: add emulation for copy
dm: Add support for copy offload.
dm: Enable copy offload for dm-linear target
SelvaKumar S (3):
block: make bio_map_kern() non static
nvme: add copy support
dm kcopyd: use copy offload support
block/blk-lib.c | 335 ++++++++++++++++++++++++++++++
block/blk-map.c | 2 +-
block/blk-settings.c | 6 +
block/blk-sysfs.c | 51 +++++
block/blk.h | 2 +
block/ioctl.c | 37 ++++
drivers/md/dm-kcopyd.c | 57 ++++-
drivers/md/dm-linear.c | 1 +
drivers/md/dm-table.c | 43 ++++
drivers/md/dm.c | 6 +
drivers/nvme/host/core.c | 121 ++++++++++-
drivers/nvme/host/nvme.h | 7 +
drivers/nvme/host/pci.c | 9 +
drivers/nvme/host/trace.c | 19 ++
drivers/nvme/target/admin-cmd.c | 8 +-
drivers/nvme/target/io-cmd-bdev.c | 66 ++++++
drivers/nvme/target/io-cmd-file.c | 48 +++++
include/linux/blk_types.h | 20 ++
include/linux/blkdev.h | 17 ++
include/linux/device-mapper.h | 5 +
include/linux/nvme.h | 43 +++-
include/uapi/linux/fs.h | 23 ++
22 files changed, 912 insertions(+), 14 deletions(-)
--
2.30.0-rc0
--
dm-devel mailing list
dm-devel@redhat.com
https://listman.redhat.com/mailman/listinfo/dm-devel
^ permalink raw reply [flat|nested] 272+ messages in thread
[parent not found: <CGME20220207141908epcas5p4f270c89fc32434ea8b525fa973098231@epcas5p4.samsung.com>]
* [PATCH v2 01/10] block: make bio_map_kern() non static
[not found] ` <CGME20220207141908epcas5p4f270c89fc32434ea8b525fa973098231@epcas5p4.samsung.com>
@ 2022-02-07 14:13 ` Nitesh Shetty
0 siblings, 0 replies; 272+ messages in thread
From: Nitesh Shetty @ 2022-02-07 14:13 UTC (permalink / raw)
To: mpatocka
Cc: javier, chaitanyak, linux-block, linux-scsi, dm-devel,
linux-nvme, linux-fsdevel, axboe, msnitzer, bvanassche,
martin.petersen, roland, hare, kbusch, hch, Frederick.Knight,
zach.brown, osandov, lsf-pc, djwong, josef, clm, dsterba, tytso,
jack, joshi.k, arnav.dawn, nj.shetty, SelvaKumar S
From: SelvaKumar S <selvakuma.s1@samsung.com>
Make bio_map_kern() non static
Signed-off-by: SelvaKumar S <selvakuma.s1@samsung.com>
Signed-off-by: Nitesh Shetty <nj.shetty@samsung.com>
---
block/blk-map.c | 2 +-
include/linux/blkdev.h | 2 ++
2 files changed, 3 insertions(+), 1 deletion(-)
diff --git a/block/blk-map.c b/block/blk-map.c
index 4526adde0156..c110205df0d5 100644
--- a/block/blk-map.c
+++ b/block/blk-map.c
@@ -336,7 +336,7 @@ static void bio_map_kern_endio(struct bio *bio)
* Map the kernel address into a bio suitable for io to a block
* device. Returns an error pointer in case of error.
*/
-static struct bio *bio_map_kern(struct request_queue *q, void *data,
+struct bio *bio_map_kern(struct request_queue *q, void *data,
unsigned int len, gfp_t gfp_mask)
{
unsigned long kaddr = (unsigned long)data;
diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h
index 3bfc75a2a450..efed3820cbf7 100644
--- a/include/linux/blkdev.h
+++ b/include/linux/blkdev.h
@@ -1106,6 +1106,8 @@ extern int blkdev_issue_discard(struct block_device *bdev, sector_t sector,
extern int __blkdev_issue_discard(struct block_device *bdev, sector_t sector,
sector_t nr_sects, gfp_t gfp_mask, int flags,
struct bio **biop);
+struct bio *bio_map_kern(struct request_queue *q, void *data, unsigned int len,
+ gfp_t gfp_mask);
#define BLKDEV_ZERO_NOUNMAP (1 << 0) /* do not free blocks */
#define BLKDEV_ZERO_NOFALLBACK (1 << 1) /* don't write explicit zeroes */
--
2.30.0-rc0
^ permalink raw reply related [flat|nested] 272+ messages in thread* [dm-devel] [PATCH v2 01/10] block: make bio_map_kern() non static
@ 2022-02-07 14:13 ` Nitesh Shetty
0 siblings, 0 replies; 272+ messages in thread
From: Nitesh Shetty @ 2022-02-07 14:13 UTC (permalink / raw)
To: mpatocka
Cc: djwong, linux-nvme, clm, dm-devel, osandov, javier, bvanassche,
linux-scsi, hch, roland, nj.shetty, zach.brown, chaitanyak,
SelvaKumar S, msnitzer, josef, linux-block, dsterba, kbusch,
Frederick.Knight, axboe, tytso, joshi.k, martin.petersen,
arnav.dawn, jack, linux-fsdevel, lsf-pc
From: SelvaKumar S <selvakuma.s1@samsung.com>
Make bio_map_kern() non static
Signed-off-by: SelvaKumar S <selvakuma.s1@samsung.com>
Signed-off-by: Nitesh Shetty <nj.shetty@samsung.com>
---
block/blk-map.c | 2 +-
include/linux/blkdev.h | 2 ++
2 files changed, 3 insertions(+), 1 deletion(-)
diff --git a/block/blk-map.c b/block/blk-map.c
index 4526adde0156..c110205df0d5 100644
--- a/block/blk-map.c
+++ b/block/blk-map.c
@@ -336,7 +336,7 @@ static void bio_map_kern_endio(struct bio *bio)
* Map the kernel address into a bio suitable for io to a block
* device. Returns an error pointer in case of error.
*/
-static struct bio *bio_map_kern(struct request_queue *q, void *data,
+struct bio *bio_map_kern(struct request_queue *q, void *data,
unsigned int len, gfp_t gfp_mask)
{
unsigned long kaddr = (unsigned long)data;
diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h
index 3bfc75a2a450..efed3820cbf7 100644
--- a/include/linux/blkdev.h
+++ b/include/linux/blkdev.h
@@ -1106,6 +1106,8 @@ extern int blkdev_issue_discard(struct block_device *bdev, sector_t sector,
extern int __blkdev_issue_discard(struct block_device *bdev, sector_t sector,
sector_t nr_sects, gfp_t gfp_mask, int flags,
struct bio **biop);
+struct bio *bio_map_kern(struct request_queue *q, void *data, unsigned int len,
+ gfp_t gfp_mask);
#define BLKDEV_ZERO_NOUNMAP (1 << 0) /* do not free blocks */
#define BLKDEV_ZERO_NOFALLBACK (1 << 1) /* don't write explicit zeroes */
--
2.30.0-rc0
--
dm-devel mailing list
dm-devel@redhat.com
https://listman.redhat.com/mailman/listinfo/dm-devel
^ permalink raw reply related [flat|nested] 272+ messages in thread
[parent not found: <CGME20220207141913epcas5p4d41cb549b7cca1ede5c7a66bbd110da0@epcas5p4.samsung.com>]
* [PATCH v2 02/10] block: Introduce queue limits for copy-offload support
[not found] ` <CGME20220207141913epcas5p4d41cb549b7cca1ede5c7a66bbd110da0@epcas5p4.samsung.com>
@ 2022-02-07 14:13 ` Nitesh Shetty
0 siblings, 0 replies; 272+ messages in thread
From: Nitesh Shetty @ 2022-02-07 14:13 UTC (permalink / raw)
To: mpatocka
Cc: javier, chaitanyak, linux-block, linux-scsi, dm-devel,
linux-nvme, linux-fsdevel, axboe, msnitzer, bvanassche,
martin.petersen, roland, hare, kbusch, hch, Frederick.Knight,
zach.brown, osandov, lsf-pc, djwong, josef, clm, dsterba, tytso,
jack, joshi.k, arnav.dawn, nj.shetty, SelvaKumar S
Add device limits as sysfs entries,
- copy_offload (READ_WRITE)
- max_copy_sectors (READ_ONLY)
- max_copy_ranges_sectors (READ_ONLY)
- max_copy_nr_ranges (READ_ONLY)
copy_offload(= 0), is disabled by default. This needs to be enabled if
copy-offload needs to be used.
max_copy_sectors = 0, indicates the device doesn't support native copy.
Signed-off-by: Nitesh Shetty <nj.shetty@samsung.com>
Signed-off-by: SelvaKumar S <selvakuma.s1@samsung.com>
Signed-off-by: Kanchan Joshi <joshi.k@samsung.com>
---
block/blk-settings.c | 4 ++++
block/blk-sysfs.c | 51 ++++++++++++++++++++++++++++++++++++++++++
include/linux/blkdev.h | 12 ++++++++++
3 files changed, 67 insertions(+)
diff --git a/block/blk-settings.c b/block/blk-settings.c
index b880c70e22e4..818454552cf8 100644
--- a/block/blk-settings.c
+++ b/block/blk-settings.c
@@ -57,6 +57,10 @@ void blk_set_default_limits(struct queue_limits *lim)
lim->misaligned = 0;
lim->zoned = BLK_ZONED_NONE;
lim->zone_write_granularity = 0;
+ lim->copy_offload = 0;
+ lim->max_copy_sectors = 0;
+ lim->max_copy_nr_ranges = 0;
+ lim->max_copy_range_sectors = 0;
}
EXPORT_SYMBOL(blk_set_default_limits);
diff --git a/block/blk-sysfs.c b/block/blk-sysfs.c
index 9f32882ceb2f..dc68ae6b55c9 100644
--- a/block/blk-sysfs.c
+++ b/block/blk-sysfs.c
@@ -171,6 +171,48 @@ static ssize_t queue_discard_granularity_show(struct request_queue *q, char *pag
return queue_var_show(q->limits.discard_granularity, page);
}
+static ssize_t queue_copy_offload_show(struct request_queue *q, char *page)
+{
+ return queue_var_show(q->limits.copy_offload, page);
+}
+
+static ssize_t queue_copy_offload_store(struct request_queue *q,
+ const char *page, size_t count)
+{
+ unsigned long copy_offload;
+ ssize_t ret = queue_var_store(©_offload, page, count);
+
+ if (ret < 0)
+ return ret;
+
+ if (copy_offload && q->limits.max_copy_sectors == 0)
+ return -EINVAL;
+
+ if (copy_offload)
+ q->limits.copy_offload = BLK_COPY_OFFLOAD;
+ else
+ q->limits.copy_offload = 0;
+
+ return ret;
+}
+
+static ssize_t queue_max_copy_sectors_show(struct request_queue *q, char *page)
+{
+ return queue_var_show(q->limits.max_copy_sectors, page);
+}
+
+static ssize_t queue_max_copy_range_sectors_show(struct request_queue *q,
+ char *page)
+{
+ return queue_var_show(q->limits.max_copy_range_sectors, page);
+}
+
+static ssize_t queue_max_copy_nr_ranges_show(struct request_queue *q,
+ char *page)
+{
+ return queue_var_show(q->limits.max_copy_nr_ranges, page);
+}
+
static ssize_t queue_discard_max_hw_show(struct request_queue *q, char *page)
{
@@ -597,6 +639,11 @@ QUEUE_RO_ENTRY(queue_nr_zones, "nr_zones");
QUEUE_RO_ENTRY(queue_max_open_zones, "max_open_zones");
QUEUE_RO_ENTRY(queue_max_active_zones, "max_active_zones");
+QUEUE_RW_ENTRY(queue_copy_offload, "copy_offload");
+QUEUE_RO_ENTRY(queue_max_copy_sectors, "max_copy_sectors");
+QUEUE_RO_ENTRY(queue_max_copy_range_sectors, "max_copy_range_sectors");
+QUEUE_RO_ENTRY(queue_max_copy_nr_ranges, "max_copy_nr_ranges");
+
QUEUE_RW_ENTRY(queue_nomerges, "nomerges");
QUEUE_RW_ENTRY(queue_rq_affinity, "rq_affinity");
QUEUE_RW_ENTRY(queue_poll, "io_poll");
@@ -643,6 +690,10 @@ static struct attribute *queue_attrs[] = {
&queue_discard_max_entry.attr,
&queue_discard_max_hw_entry.attr,
&queue_discard_zeroes_data_entry.attr,
+ &queue_copy_offload_entry.attr,
+ &queue_max_copy_sectors_entry.attr,
+ &queue_max_copy_range_sectors_entry.attr,
+ &queue_max_copy_nr_ranges_entry.attr,
&queue_write_same_max_entry.attr,
&queue_write_zeroes_max_entry.attr,
&queue_zone_append_max_entry.attr,
diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h
index efed3820cbf7..f63ae50f1de3 100644
--- a/include/linux/blkdev.h
+++ b/include/linux/blkdev.h
@@ -51,6 +51,12 @@ extern struct class block_class;
/* Doing classic polling */
#define BLK_MQ_POLL_CLASSIC -1
+/* Define copy offload options */
+enum blk_copy {
+ BLK_COPY_EMULATE = 0,
+ BLK_COPY_OFFLOAD,
+};
+
/*
* Maximum number of blkcg policies allowed to be registered concurrently.
* Defined here to simplify include dependency.
@@ -253,6 +259,10 @@ struct queue_limits {
unsigned int discard_granularity;
unsigned int discard_alignment;
unsigned int zone_write_granularity;
+ unsigned int copy_offload;
+ unsigned int max_copy_sectors;
+ unsigned short max_copy_range_sectors;
+ unsigned short max_copy_nr_ranges;
unsigned short max_segments;
unsigned short max_integrity_segments;
@@ -562,6 +572,7 @@ struct request_queue {
#define QUEUE_FLAG_RQ_ALLOC_TIME 27 /* record rq->alloc_time_ns */
#define QUEUE_FLAG_HCTX_ACTIVE 28 /* at least one blk-mq hctx is active */
#define QUEUE_FLAG_NOWAIT 29 /* device supports NOWAIT */
+#define QUEUE_FLAG_COPY 30 /* supports copy offload */
#define QUEUE_FLAG_MQ_DEFAULT ((1 << QUEUE_FLAG_IO_STAT) | \
(1 << QUEUE_FLAG_SAME_COMP) | \
@@ -585,6 +596,7 @@ bool blk_queue_flag_test_and_set(unsigned int flag, struct request_queue *q);
#define blk_queue_io_stat(q) test_bit(QUEUE_FLAG_IO_STAT, &(q)->queue_flags)
#define blk_queue_add_random(q) test_bit(QUEUE_FLAG_ADD_RANDOM, &(q)->queue_flags)
#define blk_queue_discard(q) test_bit(QUEUE_FLAG_DISCARD, &(q)->queue_flags)
+#define blk_queue_copy(q) test_bit(QUEUE_FLAG_COPY, &(q)->queue_flags)
#define blk_queue_zone_resetall(q) \
test_bit(QUEUE_FLAG_ZONE_RESETALL, &(q)->queue_flags)
#define blk_queue_secure_erase(q) \
--
2.30.0-rc0
^ permalink raw reply related [flat|nested] 272+ messages in thread* [dm-devel] [PATCH v2 02/10] block: Introduce queue limits for copy-offload support
@ 2022-02-07 14:13 ` Nitesh Shetty
0 siblings, 0 replies; 272+ messages in thread
From: Nitesh Shetty @ 2022-02-07 14:13 UTC (permalink / raw)
To: mpatocka
Cc: djwong, linux-nvme, clm, dm-devel, osandov, javier, bvanassche,
linux-scsi, hch, roland, nj.shetty, zach.brown, chaitanyak,
SelvaKumar S, msnitzer, josef, linux-block, dsterba, kbusch,
Frederick.Knight, axboe, tytso, joshi.k, martin.petersen,
arnav.dawn, jack, linux-fsdevel, lsf-pc
Add device limits as sysfs entries,
- copy_offload (READ_WRITE)
- max_copy_sectors (READ_ONLY)
- max_copy_ranges_sectors (READ_ONLY)
- max_copy_nr_ranges (READ_ONLY)
copy_offload(= 0), is disabled by default. This needs to be enabled if
copy-offload needs to be used.
max_copy_sectors = 0, indicates the device doesn't support native copy.
Signed-off-by: Nitesh Shetty <nj.shetty@samsung.com>
Signed-off-by: SelvaKumar S <selvakuma.s1@samsung.com>
Signed-off-by: Kanchan Joshi <joshi.k@samsung.com>
---
block/blk-settings.c | 4 ++++
block/blk-sysfs.c | 51 ++++++++++++++++++++++++++++++++++++++++++
include/linux/blkdev.h | 12 ++++++++++
3 files changed, 67 insertions(+)
diff --git a/block/blk-settings.c b/block/blk-settings.c
index b880c70e22e4..818454552cf8 100644
--- a/block/blk-settings.c
+++ b/block/blk-settings.c
@@ -57,6 +57,10 @@ void blk_set_default_limits(struct queue_limits *lim)
lim->misaligned = 0;
lim->zoned = BLK_ZONED_NONE;
lim->zone_write_granularity = 0;
+ lim->copy_offload = 0;
+ lim->max_copy_sectors = 0;
+ lim->max_copy_nr_ranges = 0;
+ lim->max_copy_range_sectors = 0;
}
EXPORT_SYMBOL(blk_set_default_limits);
diff --git a/block/blk-sysfs.c b/block/blk-sysfs.c
index 9f32882ceb2f..dc68ae6b55c9 100644
--- a/block/blk-sysfs.c
+++ b/block/blk-sysfs.c
@@ -171,6 +171,48 @@ static ssize_t queue_discard_granularity_show(struct request_queue *q, char *pag
return queue_var_show(q->limits.discard_granularity, page);
}
+static ssize_t queue_copy_offload_show(struct request_queue *q, char *page)
+{
+ return queue_var_show(q->limits.copy_offload, page);
+}
+
+static ssize_t queue_copy_offload_store(struct request_queue *q,
+ const char *page, size_t count)
+{
+ unsigned long copy_offload;
+ ssize_t ret = queue_var_store(©_offload, page, count);
+
+ if (ret < 0)
+ return ret;
+
+ if (copy_offload && q->limits.max_copy_sectors == 0)
+ return -EINVAL;
+
+ if (copy_offload)
+ q->limits.copy_offload = BLK_COPY_OFFLOAD;
+ else
+ q->limits.copy_offload = 0;
+
+ return ret;
+}
+
+static ssize_t queue_max_copy_sectors_show(struct request_queue *q, char *page)
+{
+ return queue_var_show(q->limits.max_copy_sectors, page);
+}
+
+static ssize_t queue_max_copy_range_sectors_show(struct request_queue *q,
+ char *page)
+{
+ return queue_var_show(q->limits.max_copy_range_sectors, page);
+}
+
+static ssize_t queue_max_copy_nr_ranges_show(struct request_queue *q,
+ char *page)
+{
+ return queue_var_show(q->limits.max_copy_nr_ranges, page);
+}
+
static ssize_t queue_discard_max_hw_show(struct request_queue *q, char *page)
{
@@ -597,6 +639,11 @@ QUEUE_RO_ENTRY(queue_nr_zones, "nr_zones");
QUEUE_RO_ENTRY(queue_max_open_zones, "max_open_zones");
QUEUE_RO_ENTRY(queue_max_active_zones, "max_active_zones");
+QUEUE_RW_ENTRY(queue_copy_offload, "copy_offload");
+QUEUE_RO_ENTRY(queue_max_copy_sectors, "max_copy_sectors");
+QUEUE_RO_ENTRY(queue_max_copy_range_sectors, "max_copy_range_sectors");
+QUEUE_RO_ENTRY(queue_max_copy_nr_ranges, "max_copy_nr_ranges");
+
QUEUE_RW_ENTRY(queue_nomerges, "nomerges");
QUEUE_RW_ENTRY(queue_rq_affinity, "rq_affinity");
QUEUE_RW_ENTRY(queue_poll, "io_poll");
@@ -643,6 +690,10 @@ static struct attribute *queue_attrs[] = {
&queue_discard_max_entry.attr,
&queue_discard_max_hw_entry.attr,
&queue_discard_zeroes_data_entry.attr,
+ &queue_copy_offload_entry.attr,
+ &queue_max_copy_sectors_entry.attr,
+ &queue_max_copy_range_sectors_entry.attr,
+ &queue_max_copy_nr_ranges_entry.attr,
&queue_write_same_max_entry.attr,
&queue_write_zeroes_max_entry.attr,
&queue_zone_append_max_entry.attr,
diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h
index efed3820cbf7..f63ae50f1de3 100644
--- a/include/linux/blkdev.h
+++ b/include/linux/blkdev.h
@@ -51,6 +51,12 @@ extern struct class block_class;
/* Doing classic polling */
#define BLK_MQ_POLL_CLASSIC -1
+/* Define copy offload options */
+enum blk_copy {
+ BLK_COPY_EMULATE = 0,
+ BLK_COPY_OFFLOAD,
+};
+
/*
* Maximum number of blkcg policies allowed to be registered concurrently.
* Defined here to simplify include dependency.
@@ -253,6 +259,10 @@ struct queue_limits {
unsigned int discard_granularity;
unsigned int discard_alignment;
unsigned int zone_write_granularity;
+ unsigned int copy_offload;
+ unsigned int max_copy_sectors;
+ unsigned short max_copy_range_sectors;
+ unsigned short max_copy_nr_ranges;
unsigned short max_segments;
unsigned short max_integrity_segments;
@@ -562,6 +572,7 @@ struct request_queue {
#define QUEUE_FLAG_RQ_ALLOC_TIME 27 /* record rq->alloc_time_ns */
#define QUEUE_FLAG_HCTX_ACTIVE 28 /* at least one blk-mq hctx is active */
#define QUEUE_FLAG_NOWAIT 29 /* device supports NOWAIT */
+#define QUEUE_FLAG_COPY 30 /* supports copy offload */
#define QUEUE_FLAG_MQ_DEFAULT ((1 << QUEUE_FLAG_IO_STAT) | \
(1 << QUEUE_FLAG_SAME_COMP) | \
@@ -585,6 +596,7 @@ bool blk_queue_flag_test_and_set(unsigned int flag, struct request_queue *q);
#define blk_queue_io_stat(q) test_bit(QUEUE_FLAG_IO_STAT, &(q)->queue_flags)
#define blk_queue_add_random(q) test_bit(QUEUE_FLAG_ADD_RANDOM, &(q)->queue_flags)
#define blk_queue_discard(q) test_bit(QUEUE_FLAG_DISCARD, &(q)->queue_flags)
+#define blk_queue_copy(q) test_bit(QUEUE_FLAG_COPY, &(q)->queue_flags)
#define blk_queue_zone_resetall(q) \
test_bit(QUEUE_FLAG_ZONE_RESETALL, &(q)->queue_flags)
#define blk_queue_secure_erase(q) \
--
2.30.0-rc0
--
dm-devel mailing list
dm-devel@redhat.com
https://listman.redhat.com/mailman/listinfo/dm-devel
^ permalink raw reply related [flat|nested] 272+ messages in thread* Re: [PATCH v2 02/10] block: Introduce queue limits for copy-offload support
2022-02-07 14:13 ` [dm-devel] " Nitesh Shetty
@ 2022-02-08 7:01 ` Damien Le Moal
-1 siblings, 0 replies; 272+ messages in thread
From: Damien Le Moal @ 2022-02-08 7:01 UTC (permalink / raw)
To: Nitesh Shetty, mpatocka
Cc: javier, chaitanyak, linux-block, linux-scsi, dm-devel,
linux-nvme, linux-fsdevel, axboe, msnitzer, bvanassche,
martin.petersen, roland, hare, kbusch, hch, Frederick.Knight,
zach.brown, osandov, lsf-pc, djwong, josef, clm, dsterba, tytso,
jack, joshi.k, arnav.dawn, SelvaKumar S
On 2/7/22 23:13, Nitesh Shetty wrote:
> Add device limits as sysfs entries,
> - copy_offload (READ_WRITE)
> - max_copy_sectors (READ_ONLY)
Why read-only ? With the name as you have it, it seems to be the soft
control for the max size of copy operations rather than the actual
device limit. So it would be better to align to other limits like max
sectors/max_hw_sectors and have:
max_copy_sectors (RW)
max_hw_copy_sectors (RO)
> - max_copy_ranges_sectors (READ_ONLY)
> - max_copy_nr_ranges (READ_ONLY)
Same for these.
>
> copy_offload(= 0), is disabled by default. This needs to be enabled if
> copy-offload needs to be used.
How does this work ? This limit will be present for a DM device AND the
underlying devices of the DM target. But "offload" applies only to the
underlying devices, not the DM device...
Also, since this is not an underlying device limitation but an on/off
switch, this should probably be moved to a request_queue boolean field
or flag bit, controlled with sysfs.
> max_copy_sectors = 0, indicates the device doesn't support native copy.
>
> Signed-off-by: Nitesh Shetty <nj.shetty@samsung.com>
> Signed-off-by: SelvaKumar S <selvakuma.s1@samsung.com>
> Signed-off-by: Kanchan Joshi <joshi.k@samsung.com>
> ---
> block/blk-settings.c | 4 ++++
> block/blk-sysfs.c | 51 ++++++++++++++++++++++++++++++++++++++++++
> include/linux/blkdev.h | 12 ++++++++++
> 3 files changed, 67 insertions(+)
>
> diff --git a/block/blk-settings.c b/block/blk-settings.c
> index b880c70e22e4..818454552cf8 100644
> --- a/block/blk-settings.c
> +++ b/block/blk-settings.c
> @@ -57,6 +57,10 @@ void blk_set_default_limits(struct queue_limits *lim)
> lim->misaligned = 0;
> lim->zoned = BLK_ZONED_NONE;
> lim->zone_write_granularity = 0;
> + lim->copy_offload = 0;
> + lim->max_copy_sectors = 0;
> + lim->max_copy_nr_ranges = 0;
> + lim->max_copy_range_sectors = 0;
> }
> EXPORT_SYMBOL(blk_set_default_limits);
>
> diff --git a/block/blk-sysfs.c b/block/blk-sysfs.c
> index 9f32882ceb2f..dc68ae6b55c9 100644
> --- a/block/blk-sysfs.c
> +++ b/block/blk-sysfs.c
> @@ -171,6 +171,48 @@ static ssize_t queue_discard_granularity_show(struct request_queue *q, char *pag
> return queue_var_show(q->limits.discard_granularity, page);
> }
>
> +static ssize_t queue_copy_offload_show(struct request_queue *q, char *page)
> +{
> + return queue_var_show(q->limits.copy_offload, page);
> +}
> +
> +static ssize_t queue_copy_offload_store(struct request_queue *q,
> + const char *page, size_t count)
> +{
> + unsigned long copy_offload;
> + ssize_t ret = queue_var_store(©_offload, page, count);
> +
> + if (ret < 0)
> + return ret;
> +
> + if (copy_offload && q->limits.max_copy_sectors == 0)
> + return -EINVAL;
> +
> + if (copy_offload)
> + q->limits.copy_offload = BLK_COPY_OFFLOAD;
> + else
> + q->limits.copy_offload = 0;
> +
> + return ret;
> +}
> +
> +static ssize_t queue_max_copy_sectors_show(struct request_queue *q, char *page)
> +{
> + return queue_var_show(q->limits.max_copy_sectors, page);
> +}
> +
> +static ssize_t queue_max_copy_range_sectors_show(struct request_queue *q,
> + char *page)
> +{
> + return queue_var_show(q->limits.max_copy_range_sectors, page);
> +}
> +
> +static ssize_t queue_max_copy_nr_ranges_show(struct request_queue *q,
> + char *page)
> +{
> + return queue_var_show(q->limits.max_copy_nr_ranges, page);
> +}
> +
> static ssize_t queue_discard_max_hw_show(struct request_queue *q, char *page)
> {
>
> @@ -597,6 +639,11 @@ QUEUE_RO_ENTRY(queue_nr_zones, "nr_zones");
> QUEUE_RO_ENTRY(queue_max_open_zones, "max_open_zones");
> QUEUE_RO_ENTRY(queue_max_active_zones, "max_active_zones");
>
> +QUEUE_RW_ENTRY(queue_copy_offload, "copy_offload");
> +QUEUE_RO_ENTRY(queue_max_copy_sectors, "max_copy_sectors");
> +QUEUE_RO_ENTRY(queue_max_copy_range_sectors, "max_copy_range_sectors");
> +QUEUE_RO_ENTRY(queue_max_copy_nr_ranges, "max_copy_nr_ranges");
> +
> QUEUE_RW_ENTRY(queue_nomerges, "nomerges");
> QUEUE_RW_ENTRY(queue_rq_affinity, "rq_affinity");
> QUEUE_RW_ENTRY(queue_poll, "io_poll");
> @@ -643,6 +690,10 @@ static struct attribute *queue_attrs[] = {
> &queue_discard_max_entry.attr,
> &queue_discard_max_hw_entry.attr,
> &queue_discard_zeroes_data_entry.attr,
> + &queue_copy_offload_entry.attr,
> + &queue_max_copy_sectors_entry.attr,
> + &queue_max_copy_range_sectors_entry.attr,
> + &queue_max_copy_nr_ranges_entry.attr,
> &queue_write_same_max_entry.attr,
> &queue_write_zeroes_max_entry.attr,
> &queue_zone_append_max_entry.attr,
> diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h
> index efed3820cbf7..f63ae50f1de3 100644
> --- a/include/linux/blkdev.h
> +++ b/include/linux/blkdev.h
> @@ -51,6 +51,12 @@ extern struct class block_class;
> /* Doing classic polling */
> #define BLK_MQ_POLL_CLASSIC -1
>
> +/* Define copy offload options */
> +enum blk_copy {
> + BLK_COPY_EMULATE = 0,
> + BLK_COPY_OFFLOAD,
> +};
> +
> /*
> * Maximum number of blkcg policies allowed to be registered concurrently.
> * Defined here to simplify include dependency.
> @@ -253,6 +259,10 @@ struct queue_limits {
> unsigned int discard_granularity;
> unsigned int discard_alignment;
> unsigned int zone_write_granularity;
> + unsigned int copy_offload;
> + unsigned int max_copy_sectors;
> + unsigned short max_copy_range_sectors;
> + unsigned short max_copy_nr_ranges;
>
> unsigned short max_segments;
> unsigned short max_integrity_segments;
> @@ -562,6 +572,7 @@ struct request_queue {
> #define QUEUE_FLAG_RQ_ALLOC_TIME 27 /* record rq->alloc_time_ns */
> #define QUEUE_FLAG_HCTX_ACTIVE 28 /* at least one blk-mq hctx is active */
> #define QUEUE_FLAG_NOWAIT 29 /* device supports NOWAIT */
> +#define QUEUE_FLAG_COPY 30 /* supports copy offload */
Then what is the point of max_copy_sectors limit ? You can test support
by the device by looking at max_copy_sectors != 0, no ? This flag is
duplicated information.
I would rather use it for the on/off switch for the copy offload,
removing the copy_offload limit.
>
> #define QUEUE_FLAG_MQ_DEFAULT ((1 << QUEUE_FLAG_IO_STAT) | \
> (1 << QUEUE_FLAG_SAME_COMP) | \
> @@ -585,6 +596,7 @@ bool blk_queue_flag_test_and_set(unsigned int flag, struct request_queue *q);
> #define blk_queue_io_stat(q) test_bit(QUEUE_FLAG_IO_STAT, &(q)->queue_flags)
> #define blk_queue_add_random(q) test_bit(QUEUE_FLAG_ADD_RANDOM, &(q)->queue_flags)
> #define blk_queue_discard(q) test_bit(QUEUE_FLAG_DISCARD, &(q)->queue_flags)
> +#define blk_queue_copy(q) test_bit(QUEUE_FLAG_COPY, &(q)->queue_flags)
> #define blk_queue_zone_resetall(q) \
> test_bit(QUEUE_FLAG_ZONE_RESETALL, &(q)->queue_flags)
> #define blk_queue_secure_erase(q) \
--
Damien Le Moal
Western Digital Research
^ permalink raw reply [flat|nested] 272+ messages in thread* Re: [dm-devel] [PATCH v2 02/10] block: Introduce queue limits for copy-offload support
@ 2022-02-08 7:01 ` Damien Le Moal
0 siblings, 0 replies; 272+ messages in thread
From: Damien Le Moal @ 2022-02-08 7:01 UTC (permalink / raw)
To: Nitesh Shetty, mpatocka
Cc: djwong, linux-nvme, clm, dm-devel, osandov, javier, bvanassche,
linux-scsi, hch, roland, zach.brown, chaitanyak, SelvaKumar S,
msnitzer, josef, linux-block, dsterba, kbusch, Frederick.Knight,
axboe, tytso, joshi.k, martin.petersen, arnav.dawn, jack,
linux-fsdevel, lsf-pc
On 2/7/22 23:13, Nitesh Shetty wrote:
> Add device limits as sysfs entries,
> - copy_offload (READ_WRITE)
> - max_copy_sectors (READ_ONLY)
Why read-only ? With the name as you have it, it seems to be the soft
control for the max size of copy operations rather than the actual
device limit. So it would be better to align to other limits like max
sectors/max_hw_sectors and have:
max_copy_sectors (RW)
max_hw_copy_sectors (RO)
> - max_copy_ranges_sectors (READ_ONLY)
> - max_copy_nr_ranges (READ_ONLY)
Same for these.
>
> copy_offload(= 0), is disabled by default. This needs to be enabled if
> copy-offload needs to be used.
How does this work ? This limit will be present for a DM device AND the
underlying devices of the DM target. But "offload" applies only to the
underlying devices, not the DM device...
Also, since this is not an underlying device limitation but an on/off
switch, this should probably be moved to a request_queue boolean field
or flag bit, controlled with sysfs.
> max_copy_sectors = 0, indicates the device doesn't support native copy.
>
> Signed-off-by: Nitesh Shetty <nj.shetty@samsung.com>
> Signed-off-by: SelvaKumar S <selvakuma.s1@samsung.com>
> Signed-off-by: Kanchan Joshi <joshi.k@samsung.com>
> ---
> block/blk-settings.c | 4 ++++
> block/blk-sysfs.c | 51 ++++++++++++++++++++++++++++++++++++++++++
> include/linux/blkdev.h | 12 ++++++++++
> 3 files changed, 67 insertions(+)
>
> diff --git a/block/blk-settings.c b/block/blk-settings.c
> index b880c70e22e4..818454552cf8 100644
> --- a/block/blk-settings.c
> +++ b/block/blk-settings.c
> @@ -57,6 +57,10 @@ void blk_set_default_limits(struct queue_limits *lim)
> lim->misaligned = 0;
> lim->zoned = BLK_ZONED_NONE;
> lim->zone_write_granularity = 0;
> + lim->copy_offload = 0;
> + lim->max_copy_sectors = 0;
> + lim->max_copy_nr_ranges = 0;
> + lim->max_copy_range_sectors = 0;
> }
> EXPORT_SYMBOL(blk_set_default_limits);
>
> diff --git a/block/blk-sysfs.c b/block/blk-sysfs.c
> index 9f32882ceb2f..dc68ae6b55c9 100644
> --- a/block/blk-sysfs.c
> +++ b/block/blk-sysfs.c
> @@ -171,6 +171,48 @@ static ssize_t queue_discard_granularity_show(struct request_queue *q, char *pag
> return queue_var_show(q->limits.discard_granularity, page);
> }
>
> +static ssize_t queue_copy_offload_show(struct request_queue *q, char *page)
> +{
> + return queue_var_show(q->limits.copy_offload, page);
> +}
> +
> +static ssize_t queue_copy_offload_store(struct request_queue *q,
> + const char *page, size_t count)
> +{
> + unsigned long copy_offload;
> + ssize_t ret = queue_var_store(©_offload, page, count);
> +
> + if (ret < 0)
> + return ret;
> +
> + if (copy_offload && q->limits.max_copy_sectors == 0)
> + return -EINVAL;
> +
> + if (copy_offload)
> + q->limits.copy_offload = BLK_COPY_OFFLOAD;
> + else
> + q->limits.copy_offload = 0;
> +
> + return ret;
> +}
> +
> +static ssize_t queue_max_copy_sectors_show(struct request_queue *q, char *page)
> +{
> + return queue_var_show(q->limits.max_copy_sectors, page);
> +}
> +
> +static ssize_t queue_max_copy_range_sectors_show(struct request_queue *q,
> + char *page)
> +{
> + return queue_var_show(q->limits.max_copy_range_sectors, page);
> +}
> +
> +static ssize_t queue_max_copy_nr_ranges_show(struct request_queue *q,
> + char *page)
> +{
> + return queue_var_show(q->limits.max_copy_nr_ranges, page);
> +}
> +
> static ssize_t queue_discard_max_hw_show(struct request_queue *q, char *page)
> {
>
> @@ -597,6 +639,11 @@ QUEUE_RO_ENTRY(queue_nr_zones, "nr_zones");
> QUEUE_RO_ENTRY(queue_max_open_zones, "max_open_zones");
> QUEUE_RO_ENTRY(queue_max_active_zones, "max_active_zones");
>
> +QUEUE_RW_ENTRY(queue_copy_offload, "copy_offload");
> +QUEUE_RO_ENTRY(queue_max_copy_sectors, "max_copy_sectors");
> +QUEUE_RO_ENTRY(queue_max_copy_range_sectors, "max_copy_range_sectors");
> +QUEUE_RO_ENTRY(queue_max_copy_nr_ranges, "max_copy_nr_ranges");
> +
> QUEUE_RW_ENTRY(queue_nomerges, "nomerges");
> QUEUE_RW_ENTRY(queue_rq_affinity, "rq_affinity");
> QUEUE_RW_ENTRY(queue_poll, "io_poll");
> @@ -643,6 +690,10 @@ static struct attribute *queue_attrs[] = {
> &queue_discard_max_entry.attr,
> &queue_discard_max_hw_entry.attr,
> &queue_discard_zeroes_data_entry.attr,
> + &queue_copy_offload_entry.attr,
> + &queue_max_copy_sectors_entry.attr,
> + &queue_max_copy_range_sectors_entry.attr,
> + &queue_max_copy_nr_ranges_entry.attr,
> &queue_write_same_max_entry.attr,
> &queue_write_zeroes_max_entry.attr,
> &queue_zone_append_max_entry.attr,
> diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h
> index efed3820cbf7..f63ae50f1de3 100644
> --- a/include/linux/blkdev.h
> +++ b/include/linux/blkdev.h
> @@ -51,6 +51,12 @@ extern struct class block_class;
> /* Doing classic polling */
> #define BLK_MQ_POLL_CLASSIC -1
>
> +/* Define copy offload options */
> +enum blk_copy {
> + BLK_COPY_EMULATE = 0,
> + BLK_COPY_OFFLOAD,
> +};
> +
> /*
> * Maximum number of blkcg policies allowed to be registered concurrently.
> * Defined here to simplify include dependency.
> @@ -253,6 +259,10 @@ struct queue_limits {
> unsigned int discard_granularity;
> unsigned int discard_alignment;
> unsigned int zone_write_granularity;
> + unsigned int copy_offload;
> + unsigned int max_copy_sectors;
> + unsigned short max_copy_range_sectors;
> + unsigned short max_copy_nr_ranges;
>
> unsigned short max_segments;
> unsigned short max_integrity_segments;
> @@ -562,6 +572,7 @@ struct request_queue {
> #define QUEUE_FLAG_RQ_ALLOC_TIME 27 /* record rq->alloc_time_ns */
> #define QUEUE_FLAG_HCTX_ACTIVE 28 /* at least one blk-mq hctx is active */
> #define QUEUE_FLAG_NOWAIT 29 /* device supports NOWAIT */
> +#define QUEUE_FLAG_COPY 30 /* supports copy offload */
Then what is the point of max_copy_sectors limit ? You can test support
by the device by looking at max_copy_sectors != 0, no ? This flag is
duplicated information.
I would rather use it for the on/off switch for the copy offload,
removing the copy_offload limit.
>
> #define QUEUE_FLAG_MQ_DEFAULT ((1 << QUEUE_FLAG_IO_STAT) | \
> (1 << QUEUE_FLAG_SAME_COMP) | \
> @@ -585,6 +596,7 @@ bool blk_queue_flag_test_and_set(unsigned int flag, struct request_queue *q);
> #define blk_queue_io_stat(q) test_bit(QUEUE_FLAG_IO_STAT, &(q)->queue_flags)
> #define blk_queue_add_random(q) test_bit(QUEUE_FLAG_ADD_RANDOM, &(q)->queue_flags)
> #define blk_queue_discard(q) test_bit(QUEUE_FLAG_DISCARD, &(q)->queue_flags)
> +#define blk_queue_copy(q) test_bit(QUEUE_FLAG_COPY, &(q)->queue_flags)
> #define blk_queue_zone_resetall(q) \
> test_bit(QUEUE_FLAG_ZONE_RESETALL, &(q)->queue_flags)
> #define blk_queue_secure_erase(q) \
--
Damien Le Moal
Western Digital Research
--
dm-devel mailing list
dm-devel@redhat.com
https://listman.redhat.com/mailman/listinfo/dm-devel
^ permalink raw reply [flat|nested] 272+ messages in thread* Re: [PATCH v2 02/10] block: Introduce queue limits for copy-offload support
2022-02-08 7:01 ` [dm-devel] " Damien Le Moal
@ 2022-02-08 18:43 ` Nitesh Shetty
-1 siblings, 0 replies; 272+ messages in thread
From: Nitesh Shetty @ 2022-02-08 18:43 UTC (permalink / raw)
To: Damien Le Moal
Cc: mpatocka, javier, chaitanyak, linux-block, linux-scsi, dm-devel,
linux-nvme, linux-fsdevel, axboe, msnitzer, bvanassche,
martin.petersen, roland, hare, kbusch, hch, Frederick.Knight,
osandov, lsf-pc, djwong, josef, clm, dsterba, tytso, jack,
joshi.k, arnav.dawn, SelvaKumar S, nitheshshetty
[-- Attachment #1: Type: text/plain, Size: 7627 bytes --]
On Tue, Feb 08, 2022 at 04:01:23PM +0900, Damien Le Moal wrote:
> On 2/7/22 23:13, Nitesh Shetty wrote:
> > Add device limits as sysfs entries,
> > - copy_offload (READ_WRITE)
> > - max_copy_sectors (READ_ONLY)
>
> Why read-only ? With the name as you have it, it seems to be the soft
> control for the max size of copy operations rather than the actual
> device limit. So it would be better to align to other limits like max
> sectors/max_hw_sectors and have:
>
> max_copy_sectors (RW)
> max_hw_copy_sectors (RO)
>
Idea was to have minimal number of sysfs.
We will add R/W limits in next series.
> > - max_copy_ranges_sectors (READ_ONLY)
> > - max_copy_nr_ranges (READ_ONLY)
>
> Same for these.
>
> >
> > copy_offload(= 0), is disabled by default. This needs to be enabled if
> > copy-offload needs to be used.
>
> How does this work ? This limit will be present for a DM device AND the
> underlying devices of the DM target. But "offload" applies only to the
> underlying devices, not the DM device...
>
> Also, since this is not an underlying device limitation but an on/off
> switch, this should probably be moved to a request_queue boolean field
> or flag bit, controlled with sysfs.
copy_offload was used as a flag to switch between emulation/offload in
block layer.
Yeah, it makes sense to use request_queue flag for the same, also will
make dm limit calculations simple. Will add in next series.
> > max_copy_sectors = 0, indicates the device doesn't support native copy.
> >
> > Signed-off-by: Nitesh Shetty <nj.shetty@samsung.com>
> > Signed-off-by: SelvaKumar S <selvakuma.s1@samsung.com>
> > Signed-off-by: Kanchan Joshi <joshi.k@samsung.com>
> > ---
> > block/blk-settings.c | 4 ++++
> > block/blk-sysfs.c | 51 ++++++++++++++++++++++++++++++++++++++++++
> > include/linux/blkdev.h | 12 ++++++++++
> > 3 files changed, 67 insertions(+)
> >
> > diff --git a/block/blk-settings.c b/block/blk-settings.c
> > index b880c70e22e4..818454552cf8 100644
> > --- a/block/blk-settings.c
> > +++ b/block/blk-settings.c
> > @@ -57,6 +57,10 @@ void blk_set_default_limits(struct queue_limits *lim)
> > lim->misaligned = 0;
> > lim->zoned = BLK_ZONED_NONE;
> > lim->zone_write_granularity = 0;
> > + lim->copy_offload = 0;
> > + lim->max_copy_sectors = 0;
> > + lim->max_copy_nr_ranges = 0;
> > + lim->max_copy_range_sectors = 0;
> > }
> > EXPORT_SYMBOL(blk_set_default_limits);
> >
> > diff --git a/block/blk-sysfs.c b/block/blk-sysfs.c
> > index 9f32882ceb2f..dc68ae6b55c9 100644
> > --- a/block/blk-sysfs.c
> > +++ b/block/blk-sysfs.c
> > @@ -171,6 +171,48 @@ static ssize_t queue_discard_granularity_show(struct request_queue *q, char *pag
> > return queue_var_show(q->limits.discard_granularity, page);
> > }
> >
> > +static ssize_t queue_copy_offload_show(struct request_queue *q, char *page)
> > +{
> > + return queue_var_show(q->limits.copy_offload, page);
> > +}
> > +
> > +static ssize_t queue_copy_offload_store(struct request_queue *q,
> > + const char *page, size_t count)
> > +{
> > + unsigned long copy_offload;
> > + ssize_t ret = queue_var_store(©_offload, page, count);
> > +
> > + if (ret < 0)
> > + return ret;
> > +
> > + if (copy_offload && q->limits.max_copy_sectors == 0)
> > + return -EINVAL;
> > +
> > + if (copy_offload)
> > + q->limits.copy_offload = BLK_COPY_OFFLOAD;
> > + else
> > + q->limits.copy_offload = 0;
> > +
> > + return ret;
> > +}
> > +
> > +static ssize_t queue_max_copy_sectors_show(struct request_queue *q, char *page)
> > +{
> > + return queue_var_show(q->limits.max_copy_sectors, page);
> > +}
> > +
> > +static ssize_t queue_max_copy_range_sectors_show(struct request_queue *q,
> > + char *page)
> > +{
> > + return queue_var_show(q->limits.max_copy_range_sectors, page);
> > +}
> > +
> > +static ssize_t queue_max_copy_nr_ranges_show(struct request_queue *q,
> > + char *page)
> > +{
> > + return queue_var_show(q->limits.max_copy_nr_ranges, page);
> > +}
> > +
> > static ssize_t queue_discard_max_hw_show(struct request_queue *q, char *page)
> > {
> >
> > @@ -597,6 +639,11 @@ QUEUE_RO_ENTRY(queue_nr_zones, "nr_zones");
> > QUEUE_RO_ENTRY(queue_max_open_zones, "max_open_zones");
> > QUEUE_RO_ENTRY(queue_max_active_zones, "max_active_zones");
> >
> > +QUEUE_RW_ENTRY(queue_copy_offload, "copy_offload");
> > +QUEUE_RO_ENTRY(queue_max_copy_sectors, "max_copy_sectors");
> > +QUEUE_RO_ENTRY(queue_max_copy_range_sectors, "max_copy_range_sectors");
> > +QUEUE_RO_ENTRY(queue_max_copy_nr_ranges, "max_copy_nr_ranges");
> > +
> > QUEUE_RW_ENTRY(queue_nomerges, "nomerges");
> > QUEUE_RW_ENTRY(queue_rq_affinity, "rq_affinity");
> > QUEUE_RW_ENTRY(queue_poll, "io_poll");
> > @@ -643,6 +690,10 @@ static struct attribute *queue_attrs[] = {
> > &queue_discard_max_entry.attr,
> > &queue_discard_max_hw_entry.attr,
> > &queue_discard_zeroes_data_entry.attr,
> > + &queue_copy_offload_entry.attr,
> > + &queue_max_copy_sectors_entry.attr,
> > + &queue_max_copy_range_sectors_entry.attr,
> > + &queue_max_copy_nr_ranges_entry.attr,
> > &queue_write_same_max_entry.attr,
> > &queue_write_zeroes_max_entry.attr,
> > &queue_zone_append_max_entry.attr,
> > diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h
> > index efed3820cbf7..f63ae50f1de3 100644
> > --- a/include/linux/blkdev.h
> > +++ b/include/linux/blkdev.h
> > @@ -51,6 +51,12 @@ extern struct class block_class;
> > /* Doing classic polling */
> > #define BLK_MQ_POLL_CLASSIC -1
> >
> > +/* Define copy offload options */
> > +enum blk_copy {
> > + BLK_COPY_EMULATE = 0,
> > + BLK_COPY_OFFLOAD,
> > +};
> > +
> > /*
> > * Maximum number of blkcg policies allowed to be registered concurrently.
> > * Defined here to simplify include dependency.
> > @@ -253,6 +259,10 @@ struct queue_limits {
> > unsigned int discard_granularity;
> > unsigned int discard_alignment;
> > unsigned int zone_write_granularity;
> > + unsigned int copy_offload;
> > + unsigned int max_copy_sectors;
> > + unsigned short max_copy_range_sectors;
> > + unsigned short max_copy_nr_ranges;
> >
> > unsigned short max_segments;
> > unsigned short max_integrity_segments;
> > @@ -562,6 +572,7 @@ struct request_queue {
> > #define QUEUE_FLAG_RQ_ALLOC_TIME 27 /* record rq->alloc_time_ns */
> > #define QUEUE_FLAG_HCTX_ACTIVE 28 /* at least one blk-mq hctx is active */
> > #define QUEUE_FLAG_NOWAIT 29 /* device supports NOWAIT */
> > +#define QUEUE_FLAG_COPY 30 /* supports copy offload */
>
> Then what is the point of max_copy_sectors limit ? You can test support
> by the device by looking at max_copy_sectors != 0, no ? This flag is
> duplicated information.
> I would rather use it for the on/off switch for the copy offload,
> removing the copy_offload limit.
>
Same as above
> >
> > #define QUEUE_FLAG_MQ_DEFAULT ((1 << QUEUE_FLAG_IO_STAT) | \
> > (1 << QUEUE_FLAG_SAME_COMP) | \
> > @@ -585,6 +596,7 @@ bool blk_queue_flag_test_and_set(unsigned int flag, struct request_queue *q);
> > #define blk_queue_io_stat(q) test_bit(QUEUE_FLAG_IO_STAT, &(q)->queue_flags)
> > #define blk_queue_add_random(q) test_bit(QUEUE_FLAG_ADD_RANDOM, &(q)->queue_flags)
> > #define blk_queue_discard(q) test_bit(QUEUE_FLAG_DISCARD, &(q)->queue_flags)
> > +#define blk_queue_copy(q) test_bit(QUEUE_FLAG_COPY, &(q)->queue_flags)
> > #define blk_queue_zone_resetall(q) \
> > test_bit(QUEUE_FLAG_ZONE_RESETALL, &(q)->queue_flags)
> > #define blk_queue_secure_erase(q) \
>
>
> --
> Damien Le Moal
> Western Digital Research
>
--
Thank you
Nitesh
[-- Attachment #2: Type: text/plain, Size: 0 bytes --]
^ permalink raw reply [flat|nested] 272+ messages in thread* Re: [dm-devel] [PATCH v2 02/10] block: Introduce queue limits for copy-offload support
@ 2022-02-08 18:43 ` Nitesh Shetty
0 siblings, 0 replies; 272+ messages in thread
From: Nitesh Shetty @ 2022-02-08 18:43 UTC (permalink / raw)
To: Damien Le Moal
Cc: djwong, linux-nvme, clm, dm-devel, osandov, javier, bvanassche,
linux-scsi, nitheshshetty, hch, roland, dsterba, chaitanyak,
SelvaKumar S, msnitzer, josef, linux-block, mpatocka, kbusch,
Frederick.Knight, axboe, tytso, joshi.k, martin.petersen,
arnav.dawn, jack, linux-fsdevel, lsf-pc
[-- Attachment #1: Type: text/plain, Size: 7627 bytes --]
On Tue, Feb 08, 2022 at 04:01:23PM +0900, Damien Le Moal wrote:
> On 2/7/22 23:13, Nitesh Shetty wrote:
> > Add device limits as sysfs entries,
> > - copy_offload (READ_WRITE)
> > - max_copy_sectors (READ_ONLY)
>
> Why read-only ? With the name as you have it, it seems to be the soft
> control for the max size of copy operations rather than the actual
> device limit. So it would be better to align to other limits like max
> sectors/max_hw_sectors and have:
>
> max_copy_sectors (RW)
> max_hw_copy_sectors (RO)
>
Idea was to have minimal number of sysfs.
We will add R/W limits in next series.
> > - max_copy_ranges_sectors (READ_ONLY)
> > - max_copy_nr_ranges (READ_ONLY)
>
> Same for these.
>
> >
> > copy_offload(= 0), is disabled by default. This needs to be enabled if
> > copy-offload needs to be used.
>
> How does this work ? This limit will be present for a DM device AND the
> underlying devices of the DM target. But "offload" applies only to the
> underlying devices, not the DM device...
>
> Also, since this is not an underlying device limitation but an on/off
> switch, this should probably be moved to a request_queue boolean field
> or flag bit, controlled with sysfs.
copy_offload was used as a flag to switch between emulation/offload in
block layer.
Yeah, it makes sense to use request_queue flag for the same, also will
make dm limit calculations simple. Will add in next series.
> > max_copy_sectors = 0, indicates the device doesn't support native copy.
> >
> > Signed-off-by: Nitesh Shetty <nj.shetty@samsung.com>
> > Signed-off-by: SelvaKumar S <selvakuma.s1@samsung.com>
> > Signed-off-by: Kanchan Joshi <joshi.k@samsung.com>
> > ---
> > block/blk-settings.c | 4 ++++
> > block/blk-sysfs.c | 51 ++++++++++++++++++++++++++++++++++++++++++
> > include/linux/blkdev.h | 12 ++++++++++
> > 3 files changed, 67 insertions(+)
> >
> > diff --git a/block/blk-settings.c b/block/blk-settings.c
> > index b880c70e22e4..818454552cf8 100644
> > --- a/block/blk-settings.c
> > +++ b/block/blk-settings.c
> > @@ -57,6 +57,10 @@ void blk_set_default_limits(struct queue_limits *lim)
> > lim->misaligned = 0;
> > lim->zoned = BLK_ZONED_NONE;
> > lim->zone_write_granularity = 0;
> > + lim->copy_offload = 0;
> > + lim->max_copy_sectors = 0;
> > + lim->max_copy_nr_ranges = 0;
> > + lim->max_copy_range_sectors = 0;
> > }
> > EXPORT_SYMBOL(blk_set_default_limits);
> >
> > diff --git a/block/blk-sysfs.c b/block/blk-sysfs.c
> > index 9f32882ceb2f..dc68ae6b55c9 100644
> > --- a/block/blk-sysfs.c
> > +++ b/block/blk-sysfs.c
> > @@ -171,6 +171,48 @@ static ssize_t queue_discard_granularity_show(struct request_queue *q, char *pag
> > return queue_var_show(q->limits.discard_granularity, page);
> > }
> >
> > +static ssize_t queue_copy_offload_show(struct request_queue *q, char *page)
> > +{
> > + return queue_var_show(q->limits.copy_offload, page);
> > +}
> > +
> > +static ssize_t queue_copy_offload_store(struct request_queue *q,
> > + const char *page, size_t count)
> > +{
> > + unsigned long copy_offload;
> > + ssize_t ret = queue_var_store(©_offload, page, count);
> > +
> > + if (ret < 0)
> > + return ret;
> > +
> > + if (copy_offload && q->limits.max_copy_sectors == 0)
> > + return -EINVAL;
> > +
> > + if (copy_offload)
> > + q->limits.copy_offload = BLK_COPY_OFFLOAD;
> > + else
> > + q->limits.copy_offload = 0;
> > +
> > + return ret;
> > +}
> > +
> > +static ssize_t queue_max_copy_sectors_show(struct request_queue *q, char *page)
> > +{
> > + return queue_var_show(q->limits.max_copy_sectors, page);
> > +}
> > +
> > +static ssize_t queue_max_copy_range_sectors_show(struct request_queue *q,
> > + char *page)
> > +{
> > + return queue_var_show(q->limits.max_copy_range_sectors, page);
> > +}
> > +
> > +static ssize_t queue_max_copy_nr_ranges_show(struct request_queue *q,
> > + char *page)
> > +{
> > + return queue_var_show(q->limits.max_copy_nr_ranges, page);
> > +}
> > +
> > static ssize_t queue_discard_max_hw_show(struct request_queue *q, char *page)
> > {
> >
> > @@ -597,6 +639,11 @@ QUEUE_RO_ENTRY(queue_nr_zones, "nr_zones");
> > QUEUE_RO_ENTRY(queue_max_open_zones, "max_open_zones");
> > QUEUE_RO_ENTRY(queue_max_active_zones, "max_active_zones");
> >
> > +QUEUE_RW_ENTRY(queue_copy_offload, "copy_offload");
> > +QUEUE_RO_ENTRY(queue_max_copy_sectors, "max_copy_sectors");
> > +QUEUE_RO_ENTRY(queue_max_copy_range_sectors, "max_copy_range_sectors");
> > +QUEUE_RO_ENTRY(queue_max_copy_nr_ranges, "max_copy_nr_ranges");
> > +
> > QUEUE_RW_ENTRY(queue_nomerges, "nomerges");
> > QUEUE_RW_ENTRY(queue_rq_affinity, "rq_affinity");
> > QUEUE_RW_ENTRY(queue_poll, "io_poll");
> > @@ -643,6 +690,10 @@ static struct attribute *queue_attrs[] = {
> > &queue_discard_max_entry.attr,
> > &queue_discard_max_hw_entry.attr,
> > &queue_discard_zeroes_data_entry.attr,
> > + &queue_copy_offload_entry.attr,
> > + &queue_max_copy_sectors_entry.attr,
> > + &queue_max_copy_range_sectors_entry.attr,
> > + &queue_max_copy_nr_ranges_entry.attr,
> > &queue_write_same_max_entry.attr,
> > &queue_write_zeroes_max_entry.attr,
> > &queue_zone_append_max_entry.attr,
> > diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h
> > index efed3820cbf7..f63ae50f1de3 100644
> > --- a/include/linux/blkdev.h
> > +++ b/include/linux/blkdev.h
> > @@ -51,6 +51,12 @@ extern struct class block_class;
> > /* Doing classic polling */
> > #define BLK_MQ_POLL_CLASSIC -1
> >
> > +/* Define copy offload options */
> > +enum blk_copy {
> > + BLK_COPY_EMULATE = 0,
> > + BLK_COPY_OFFLOAD,
> > +};
> > +
> > /*
> > * Maximum number of blkcg policies allowed to be registered concurrently.
> > * Defined here to simplify include dependency.
> > @@ -253,6 +259,10 @@ struct queue_limits {
> > unsigned int discard_granularity;
> > unsigned int discard_alignment;
> > unsigned int zone_write_granularity;
> > + unsigned int copy_offload;
> > + unsigned int max_copy_sectors;
> > + unsigned short max_copy_range_sectors;
> > + unsigned short max_copy_nr_ranges;
> >
> > unsigned short max_segments;
> > unsigned short max_integrity_segments;
> > @@ -562,6 +572,7 @@ struct request_queue {
> > #define QUEUE_FLAG_RQ_ALLOC_TIME 27 /* record rq->alloc_time_ns */
> > #define QUEUE_FLAG_HCTX_ACTIVE 28 /* at least one blk-mq hctx is active */
> > #define QUEUE_FLAG_NOWAIT 29 /* device supports NOWAIT */
> > +#define QUEUE_FLAG_COPY 30 /* supports copy offload */
>
> Then what is the point of max_copy_sectors limit ? You can test support
> by the device by looking at max_copy_sectors != 0, no ? This flag is
> duplicated information.
> I would rather use it for the on/off switch for the copy offload,
> removing the copy_offload limit.
>
Same as above
> >
> > #define QUEUE_FLAG_MQ_DEFAULT ((1 << QUEUE_FLAG_IO_STAT) | \
> > (1 << QUEUE_FLAG_SAME_COMP) | \
> > @@ -585,6 +596,7 @@ bool blk_queue_flag_test_and_set(unsigned int flag, struct request_queue *q);
> > #define blk_queue_io_stat(q) test_bit(QUEUE_FLAG_IO_STAT, &(q)->queue_flags)
> > #define blk_queue_add_random(q) test_bit(QUEUE_FLAG_ADD_RANDOM, &(q)->queue_flags)
> > #define blk_queue_discard(q) test_bit(QUEUE_FLAG_DISCARD, &(q)->queue_flags)
> > +#define blk_queue_copy(q) test_bit(QUEUE_FLAG_COPY, &(q)->queue_flags)
> > #define blk_queue_zone_resetall(q) \
> > test_bit(QUEUE_FLAG_ZONE_RESETALL, &(q)->queue_flags)
> > #define blk_queue_secure_erase(q) \
>
>
> --
> Damien Le Moal
> Western Digital Research
>
--
Thank you
Nitesh
[-- Attachment #2: Type: text/plain, Size: 0 bytes --]
[-- Attachment #3: Type: text/plain, Size: 97 bytes --]
--
dm-devel mailing list
dm-devel@redhat.com
https://listman.redhat.com/mailman/listinfo/dm-devel
^ permalink raw reply [flat|nested] 272+ messages in thread
[parent not found: <CGME20220207141918epcas5p4f9badc0c3f3f0913f091c850d2d3bd81@epcas5p4.samsung.com>]
* [PATCH v2 03/10] block: Add copy offload support infrastructure
[not found] ` <CGME20220207141918epcas5p4f9badc0c3f3f0913f091c850d2d3bd81@epcas5p4.samsung.com>
@ 2022-02-07 14:13 ` Nitesh Shetty
0 siblings, 0 replies; 272+ messages in thread
From: Nitesh Shetty @ 2022-02-07 14:13 UTC (permalink / raw)
To: mpatocka
Cc: javier, chaitanyak, linux-block, linux-scsi, dm-devel,
linux-nvme, linux-fsdevel, axboe, msnitzer, bvanassche,
martin.petersen, roland, hare, kbusch, hch, Frederick.Knight,
zach.brown, osandov, lsf-pc, djwong, josef, clm, dsterba, tytso,
jack, joshi.k, arnav.dawn, nj.shetty, SelvaKumar S
Introduce blkdev_issue_copy which supports source and destination bdevs,
and a array of (source, destination and copy length) tuples.
Introduce REQ_COP copy offload operation flag. Create a read-write
bio pair with a token as payload and submitted to the device in order.
the read request populates token with source specific information which
is then passed with write request.
Ths design is courtsey Mikulas Patocka<mpatocka@>'s token based copy
Larger copy operation may be divided if necessary by looking at device
limits.
Signed-off-by: Nitesh Shetty <nj.shetty@samsung.com>
Signed-off-by: SelvaKumar S <selvakuma.s1@samsung.com>
Signed-off-by: Arnav Dawn <arnav.dawn@samsung.com>
---
block/blk-lib.c | 216 ++++++++++++++++++++++++++++++++++++++
block/blk-settings.c | 2 +
block/blk.h | 2 +
include/linux/blk_types.h | 20 ++++
include/linux/blkdev.h | 3 +
include/uapi/linux/fs.h | 14 +++
6 files changed, 257 insertions(+)
diff --git a/block/blk-lib.c b/block/blk-lib.c
index 1b8ced45e4e5..3ae2c27b566e 100644
--- a/block/blk-lib.c
+++ b/block/blk-lib.c
@@ -135,6 +135,222 @@ int blkdev_issue_discard(struct block_device *bdev, sector_t sector,
}
EXPORT_SYMBOL(blkdev_issue_discard);
+/*
+ * Wait on and process all in-flight BIOs. This must only be called once
+ * all bios have been issued so that the refcount can only decrease.
+ * This just waits for all bios to make it through bio_copy_end_io. IO
+ * errors are propagated through cio->io_error.
+ */
+static int cio_await_completion(struct cio *cio)
+{
+ int ret = 0;
+
+ while (atomic_read(&cio->refcount)) {
+ cio->waiter = current;
+ __set_current_state(TASK_UNINTERRUPTIBLE);
+ blk_io_schedule();
+ /* wake up sets us TASK_RUNNING */
+ cio->waiter = NULL;
+ ret = cio->io_err;
+ }
+ kvfree(cio);
+
+ return ret;
+}
+
+static void bio_copy_end_io(struct bio *bio)
+{
+ struct copy_ctx *ctx = bio->bi_private;
+ struct cio *cio = ctx->cio;
+ sector_t clen;
+ int ri = ctx->range_idx;
+
+ if (bio->bi_status) {
+ cio->io_err = bio->bi_status;
+ clen = (bio->bi_iter.bi_sector - ctx->start_sec) << SECTOR_SHIFT;
+ cio->rlist[ri].comp_len = min_t(sector_t, clen, cio->rlist[ri].comp_len);
+ }
+ __free_page(bio->bi_io_vec[0].bv_page);
+ kfree(ctx);
+ bio_put(bio);
+
+ if (atomic_dec_and_test(&cio->refcount) && cio->waiter)
+ wake_up_process(cio->waiter);
+}
+
+/*
+ * blk_copy_offload - Use device's native copy offload feature
+ * Go through user provide payload, prepare new payload based on device's copy offload limits.
+ */
+int blk_copy_offload(struct block_device *src_bdev, int nr_srcs,
+ struct range_entry *rlist, struct block_device *dst_bdev, gfp_t gfp_mask)
+{
+ struct request_queue *sq = bdev_get_queue(src_bdev);
+ struct request_queue *dq = bdev_get_queue(dst_bdev);
+ struct bio *read_bio, *write_bio;
+ struct copy_ctx *ctx;
+ struct cio *cio;
+ struct page *token;
+ sector_t src_blk, copy_len, dst_blk;
+ sector_t remaining, max_copy_len = LONG_MAX;
+ int ri = 0, ret = 0;
+
+ cio = kzalloc(sizeof(struct cio), GFP_KERNEL);
+ if (!cio)
+ return -ENOMEM;
+ atomic_set(&cio->refcount, 0);
+ cio->rlist = rlist;
+
+ max_copy_len = min3(max_copy_len, (sector_t)sq->limits.max_copy_sectors,
+ (sector_t)dq->limits.max_copy_sectors);
+ max_copy_len = min3(max_copy_len, (sector_t)sq->limits.max_copy_range_sectors,
+ (sector_t)dq->limits.max_copy_range_sectors) << SECTOR_SHIFT;
+
+ for (ri = 0; ri < nr_srcs; ri++) {
+ cio->rlist[ri].comp_len = rlist[ri].len;
+ for (remaining = rlist[ri].len, src_blk = rlist[ri].src, dst_blk = rlist[ri].dst;
+ remaining > 0;
+ remaining -= copy_len, src_blk += copy_len, dst_blk += copy_len) {
+ copy_len = min(remaining, max_copy_len);
+
+ token = alloc_page(gfp_mask);
+ if (unlikely(!token)) {
+ ret = -ENOMEM;
+ goto err_token;
+ }
+
+ read_bio = bio_alloc(src_bdev, 1, REQ_OP_READ | REQ_COPY | REQ_NOMERGE,
+ gfp_mask);
+ if (!read_bio) {
+ ret = -ENOMEM;
+ goto err_read_bio;
+ }
+ read_bio->bi_iter.bi_sector = src_blk >> SECTOR_SHIFT;
+ read_bio->bi_iter.bi_size = copy_len;
+ __bio_add_page(read_bio, token, PAGE_SIZE, 0);
+ ret = submit_bio_wait(read_bio);
+ if (ret) {
+ bio_put(read_bio);
+ goto err_read_bio;
+ }
+ bio_put(read_bio);
+ ctx = kzalloc(sizeof(struct copy_ctx), gfp_mask);
+ if (!ctx) {
+ ret = -ENOMEM;
+ goto err_read_bio;
+ }
+ ctx->cio = cio;
+ ctx->range_idx = ri;
+ ctx->start_sec = rlist[ri].src;
+
+ write_bio = bio_alloc(dst_bdev, 1, REQ_OP_WRITE | REQ_COPY | REQ_NOMERGE,
+ gfp_mask);
+ if (!write_bio) {
+ ret = -ENOMEM;
+ goto err_read_bio;
+ }
+
+ write_bio->bi_iter.bi_sector = dst_blk >> SECTOR_SHIFT;
+ write_bio->bi_iter.bi_size = copy_len;
+ __bio_add_page(write_bio, token, PAGE_SIZE, 0);
+ write_bio->bi_end_io = bio_copy_end_io;
+ write_bio->bi_private = ctx;
+ atomic_inc(&cio->refcount);
+ submit_bio(write_bio);
+ }
+ }
+
+ /* Wait for completion of all IO's*/
+ return cio_await_completion(cio);
+
+err_read_bio:
+ __free_page(token);
+err_token:
+ rlist[ri].comp_len = min_t(sector_t, rlist[ri].comp_len, (rlist[ri].len - remaining));
+
+ cio->io_err = ret;
+ return cio_await_completion(cio);
+}
+
+static inline int blk_copy_sanity_check(struct block_device *src_bdev,
+ struct block_device *dst_bdev, struct range_entry *rlist, int nr)
+{
+ unsigned int align_mask = max(
+ bdev_logical_block_size(dst_bdev), bdev_logical_block_size(src_bdev)) - 1;
+ sector_t len = 0;
+ int i;
+
+ for (i = 0; i < nr; i++) {
+ if (rlist[i].len)
+ len += rlist[i].len;
+ else
+ return -EINVAL;
+ if ((rlist[i].dst & align_mask) || (rlist[i].src & align_mask) ||
+ (rlist[i].len & align_mask))
+ return -EINVAL;
+ rlist[i].comp_len = 0;
+ }
+
+ if (!len && len >= MAX_COPY_TOTAL_LENGTH)
+ return -EINVAL;
+
+ return 0;
+}
+
+static inline bool blk_check_copy_offload(struct request_queue *src_q,
+ struct request_queue *dest_q)
+{
+ if (dest_q->limits.copy_offload == BLK_COPY_OFFLOAD &&
+ src_q->limits.copy_offload == BLK_COPY_OFFLOAD)
+ return true;
+
+ return false;
+}
+
+/*
+ * blkdev_issue_copy - queue a copy
+ * @src_bdev: source block device
+ * @nr_srcs: number of source ranges to copy
+ * @src_rlist: array of source ranges
+ * @dest_bdev: destination block device
+ * @gfp_mask: memory allocation flags (for bio_alloc)
+ * @flags: BLKDEV_COPY_* flags to control behaviour
+ *
+ * Description:
+ * Copy source ranges from source block device to destination block device.
+ * length of a source range cannot be zero.
+ */
+int blkdev_issue_copy(struct block_device *src_bdev, int nr,
+ struct range_entry *rlist, struct block_device *dest_bdev,
+ gfp_t gfp_mask, int flags)
+{
+ struct request_queue *src_q = bdev_get_queue(src_bdev);
+ struct request_queue *dest_q = bdev_get_queue(dest_bdev);
+ int ret = -EINVAL;
+
+ if (!src_q || !dest_q)
+ return -ENXIO;
+
+ if (!nr)
+ return -EINVAL;
+
+ if (nr >= MAX_COPY_NR_RANGE)
+ return -EINVAL;
+
+ if (bdev_read_only(dest_bdev))
+ return -EPERM;
+
+ ret = blk_copy_sanity_check(src_bdev, dest_bdev, rlist, nr);
+ if (ret)
+ return ret;
+
+ if (blk_check_copy_offload(src_q, dest_q))
+ ret = blk_copy_offload(src_bdev, nr, rlist, dest_bdev, gfp_mask);
+
+ return ret;
+}
+EXPORT_SYMBOL(blkdev_issue_copy);
+
/**
* __blkdev_issue_write_same - generate number of bios with same page
* @bdev: target blockdev
diff --git a/block/blk-settings.c b/block/blk-settings.c
index 818454552cf8..4c8d48b8af25 100644
--- a/block/blk-settings.c
+++ b/block/blk-settings.c
@@ -545,6 +545,8 @@ int blk_stack_limits(struct queue_limits *t, struct queue_limits *b,
t->max_segment_size = min_not_zero(t->max_segment_size,
b->max_segment_size);
+ t->max_copy_sectors = min_not_zero(t->max_copy_sectors, b->max_copy_sectors);
+
t->misaligned |= b->misaligned;
alignment = queue_limit_alignment_offset(b, start);
diff --git a/block/blk.h b/block/blk.h
index abb663a2a147..94d2b055750b 100644
--- a/block/blk.h
+++ b/block/blk.h
@@ -292,6 +292,8 @@ static inline bool blk_may_split(struct request_queue *q, struct bio *bio)
break;
}
+ if (unlikely(op_is_copy(bio->bi_opf)))
+ return false;
/*
* All drivers must accept single-segments bios that are <= PAGE_SIZE.
* This is a quick and dirty check that relies on the fact that
diff --git a/include/linux/blk_types.h b/include/linux/blk_types.h
index 5561e58d158a..0a3fee8ad61c 100644
--- a/include/linux/blk_types.h
+++ b/include/linux/blk_types.h
@@ -418,6 +418,7 @@ enum req_flag_bits {
/* for driver use */
__REQ_DRV,
__REQ_SWAP, /* swapping request. */
+ __REQ_COPY, /* copy request*/
__REQ_NR_BITS, /* stops here */
};
@@ -442,6 +443,7 @@ enum req_flag_bits {
#define REQ_DRV (1ULL << __REQ_DRV)
#define REQ_SWAP (1ULL << __REQ_SWAP)
+#define REQ_COPY (1ULL << __REQ_COPY)
#define REQ_FAILFAST_MASK \
(REQ_FAILFAST_DEV | REQ_FAILFAST_TRANSPORT | REQ_FAILFAST_DRIVER)
@@ -498,6 +500,11 @@ static inline bool op_is_discard(unsigned int op)
return (op & REQ_OP_MASK) == REQ_OP_DISCARD;
}
+static inline bool op_is_copy(unsigned int op)
+{
+ return (op & REQ_COPY);
+}
+
/*
* Check if a bio or request operation is a zone management operation, with
* the exception of REQ_OP_ZONE_RESET_ALL which is treated as a special case
@@ -532,4 +539,17 @@ struct blk_rq_stat {
u64 batch;
};
+struct cio {
+ atomic_t refcount;
+ blk_status_t io_err;
+ struct range_entry *rlist;
+ struct task_struct *waiter; /* waiting task (NULL if none) */
+};
+
+struct copy_ctx {
+ int range_idx;
+ sector_t start_sec;
+ struct cio *cio;
+};
+
#endif /* __LINUX_BLK_TYPES_H */
diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h
index f63ae50f1de3..15597488040c 100644
--- a/include/linux/blkdev.h
+++ b/include/linux/blkdev.h
@@ -1120,6 +1120,9 @@ extern int __blkdev_issue_discard(struct block_device *bdev, sector_t sector,
struct bio **biop);
struct bio *bio_map_kern(struct request_queue *q, void *data, unsigned int len,
gfp_t gfp_mask);
+int blkdev_issue_copy(struct block_device *src_bdev, int nr_srcs,
+ struct range_entry *src_rlist, struct block_device *dest_bdev,
+ gfp_t gfp_mask, int flags);
#define BLKDEV_ZERO_NOUNMAP (1 << 0) /* do not free blocks */
#define BLKDEV_ZERO_NOFALLBACK (1 << 1) /* don't write explicit zeroes */
diff --git a/include/uapi/linux/fs.h b/include/uapi/linux/fs.h
index bdf7b404b3e7..55bca8f6e8ed 100644
--- a/include/uapi/linux/fs.h
+++ b/include/uapi/linux/fs.h
@@ -64,6 +64,20 @@ struct fstrim_range {
__u64 minlen;
};
+/* Maximum no of entries supported */
+#define MAX_COPY_NR_RANGE (1 << 12)
+
+/* maximum total copy length */
+#define MAX_COPY_TOTAL_LENGTH (1 << 21)
+
+/* Source range entry for copy */
+struct range_entry {
+ __u64 src;
+ __u64 dst;
+ __u64 len;
+ __u64 comp_len;
+};
+
/* extent-same (dedupe) ioctls; these MUST match the btrfs ioctl definitions */
#define FILE_DEDUPE_RANGE_SAME 0
#define FILE_DEDUPE_RANGE_DIFFERS 1
--
2.30.0-rc0
^ permalink raw reply related [flat|nested] 272+ messages in thread* [dm-devel] [PATCH v2 03/10] block: Add copy offload support infrastructure
@ 2022-02-07 14:13 ` Nitesh Shetty
0 siblings, 0 replies; 272+ messages in thread
From: Nitesh Shetty @ 2022-02-07 14:13 UTC (permalink / raw)
To: mpatocka
Cc: djwong, linux-nvme, clm, dm-devel, osandov, javier, bvanassche,
linux-scsi, hch, roland, nj.shetty, zach.brown, chaitanyak,
SelvaKumar S, msnitzer, josef, linux-block, dsterba, kbusch,
Frederick.Knight, axboe, tytso, joshi.k, martin.petersen,
arnav.dawn, jack, linux-fsdevel, lsf-pc
Introduce blkdev_issue_copy which supports source and destination bdevs,
and a array of (source, destination and copy length) tuples.
Introduce REQ_COP copy offload operation flag. Create a read-write
bio pair with a token as payload and submitted to the device in order.
the read request populates token with source specific information which
is then passed with write request.
Ths design is courtsey Mikulas Patocka<mpatocka@>'s token based copy
Larger copy operation may be divided if necessary by looking at device
limits.
Signed-off-by: Nitesh Shetty <nj.shetty@samsung.com>
Signed-off-by: SelvaKumar S <selvakuma.s1@samsung.com>
Signed-off-by: Arnav Dawn <arnav.dawn@samsung.com>
---
block/blk-lib.c | 216 ++++++++++++++++++++++++++++++++++++++
block/blk-settings.c | 2 +
block/blk.h | 2 +
include/linux/blk_types.h | 20 ++++
include/linux/blkdev.h | 3 +
include/uapi/linux/fs.h | 14 +++
6 files changed, 257 insertions(+)
diff --git a/block/blk-lib.c b/block/blk-lib.c
index 1b8ced45e4e5..3ae2c27b566e 100644
--- a/block/blk-lib.c
+++ b/block/blk-lib.c
@@ -135,6 +135,222 @@ int blkdev_issue_discard(struct block_device *bdev, sector_t sector,
}
EXPORT_SYMBOL(blkdev_issue_discard);
+/*
+ * Wait on and process all in-flight BIOs. This must only be called once
+ * all bios have been issued so that the refcount can only decrease.
+ * This just waits for all bios to make it through bio_copy_end_io. IO
+ * errors are propagated through cio->io_error.
+ */
+static int cio_await_completion(struct cio *cio)
+{
+ int ret = 0;
+
+ while (atomic_read(&cio->refcount)) {
+ cio->waiter = current;
+ __set_current_state(TASK_UNINTERRUPTIBLE);
+ blk_io_schedule();
+ /* wake up sets us TASK_RUNNING */
+ cio->waiter = NULL;
+ ret = cio->io_err;
+ }
+ kvfree(cio);
+
+ return ret;
+}
+
+static void bio_copy_end_io(struct bio *bio)
+{
+ struct copy_ctx *ctx = bio->bi_private;
+ struct cio *cio = ctx->cio;
+ sector_t clen;
+ int ri = ctx->range_idx;
+
+ if (bio->bi_status) {
+ cio->io_err = bio->bi_status;
+ clen = (bio->bi_iter.bi_sector - ctx->start_sec) << SECTOR_SHIFT;
+ cio->rlist[ri].comp_len = min_t(sector_t, clen, cio->rlist[ri].comp_len);
+ }
+ __free_page(bio->bi_io_vec[0].bv_page);
+ kfree(ctx);
+ bio_put(bio);
+
+ if (atomic_dec_and_test(&cio->refcount) && cio->waiter)
+ wake_up_process(cio->waiter);
+}
+
+/*
+ * blk_copy_offload - Use device's native copy offload feature
+ * Go through user provide payload, prepare new payload based on device's copy offload limits.
+ */
+int blk_copy_offload(struct block_device *src_bdev, int nr_srcs,
+ struct range_entry *rlist, struct block_device *dst_bdev, gfp_t gfp_mask)
+{
+ struct request_queue *sq = bdev_get_queue(src_bdev);
+ struct request_queue *dq = bdev_get_queue(dst_bdev);
+ struct bio *read_bio, *write_bio;
+ struct copy_ctx *ctx;
+ struct cio *cio;
+ struct page *token;
+ sector_t src_blk, copy_len, dst_blk;
+ sector_t remaining, max_copy_len = LONG_MAX;
+ int ri = 0, ret = 0;
+
+ cio = kzalloc(sizeof(struct cio), GFP_KERNEL);
+ if (!cio)
+ return -ENOMEM;
+ atomic_set(&cio->refcount, 0);
+ cio->rlist = rlist;
+
+ max_copy_len = min3(max_copy_len, (sector_t)sq->limits.max_copy_sectors,
+ (sector_t)dq->limits.max_copy_sectors);
+ max_copy_len = min3(max_copy_len, (sector_t)sq->limits.max_copy_range_sectors,
+ (sector_t)dq->limits.max_copy_range_sectors) << SECTOR_SHIFT;
+
+ for (ri = 0; ri < nr_srcs; ri++) {
+ cio->rlist[ri].comp_len = rlist[ri].len;
+ for (remaining = rlist[ri].len, src_blk = rlist[ri].src, dst_blk = rlist[ri].dst;
+ remaining > 0;
+ remaining -= copy_len, src_blk += copy_len, dst_blk += copy_len) {
+ copy_len = min(remaining, max_copy_len);
+
+ token = alloc_page(gfp_mask);
+ if (unlikely(!token)) {
+ ret = -ENOMEM;
+ goto err_token;
+ }
+
+ read_bio = bio_alloc(src_bdev, 1, REQ_OP_READ | REQ_COPY | REQ_NOMERGE,
+ gfp_mask);
+ if (!read_bio) {
+ ret = -ENOMEM;
+ goto err_read_bio;
+ }
+ read_bio->bi_iter.bi_sector = src_blk >> SECTOR_SHIFT;
+ read_bio->bi_iter.bi_size = copy_len;
+ __bio_add_page(read_bio, token, PAGE_SIZE, 0);
+ ret = submit_bio_wait(read_bio);
+ if (ret) {
+ bio_put(read_bio);
+ goto err_read_bio;
+ }
+ bio_put(read_bio);
+ ctx = kzalloc(sizeof(struct copy_ctx), gfp_mask);
+ if (!ctx) {
+ ret = -ENOMEM;
+ goto err_read_bio;
+ }
+ ctx->cio = cio;
+ ctx->range_idx = ri;
+ ctx->start_sec = rlist[ri].src;
+
+ write_bio = bio_alloc(dst_bdev, 1, REQ_OP_WRITE | REQ_COPY | REQ_NOMERGE,
+ gfp_mask);
+ if (!write_bio) {
+ ret = -ENOMEM;
+ goto err_read_bio;
+ }
+
+ write_bio->bi_iter.bi_sector = dst_blk >> SECTOR_SHIFT;
+ write_bio->bi_iter.bi_size = copy_len;
+ __bio_add_page(write_bio, token, PAGE_SIZE, 0);
+ write_bio->bi_end_io = bio_copy_end_io;
+ write_bio->bi_private = ctx;
+ atomic_inc(&cio->refcount);
+ submit_bio(write_bio);
+ }
+ }
+
+ /* Wait for completion of all IO's*/
+ return cio_await_completion(cio);
+
+err_read_bio:
+ __free_page(token);
+err_token:
+ rlist[ri].comp_len = min_t(sector_t, rlist[ri].comp_len, (rlist[ri].len - remaining));
+
+ cio->io_err = ret;
+ return cio_await_completion(cio);
+}
+
+static inline int blk_copy_sanity_check(struct block_device *src_bdev,
+ struct block_device *dst_bdev, struct range_entry *rlist, int nr)
+{
+ unsigned int align_mask = max(
+ bdev_logical_block_size(dst_bdev), bdev_logical_block_size(src_bdev)) - 1;
+ sector_t len = 0;
+ int i;
+
+ for (i = 0; i < nr; i++) {
+ if (rlist[i].len)
+ len += rlist[i].len;
+ else
+ return -EINVAL;
+ if ((rlist[i].dst & align_mask) || (rlist[i].src & align_mask) ||
+ (rlist[i].len & align_mask))
+ return -EINVAL;
+ rlist[i].comp_len = 0;
+ }
+
+ if (!len && len >= MAX_COPY_TOTAL_LENGTH)
+ return -EINVAL;
+
+ return 0;
+}
+
+static inline bool blk_check_copy_offload(struct request_queue *src_q,
+ struct request_queue *dest_q)
+{
+ if (dest_q->limits.copy_offload == BLK_COPY_OFFLOAD &&
+ src_q->limits.copy_offload == BLK_COPY_OFFLOAD)
+ return true;
+
+ return false;
+}
+
+/*
+ * blkdev_issue_copy - queue a copy
+ * @src_bdev: source block device
+ * @nr_srcs: number of source ranges to copy
+ * @src_rlist: array of source ranges
+ * @dest_bdev: destination block device
+ * @gfp_mask: memory allocation flags (for bio_alloc)
+ * @flags: BLKDEV_COPY_* flags to control behaviour
+ *
+ * Description:
+ * Copy source ranges from source block device to destination block device.
+ * length of a source range cannot be zero.
+ */
+int blkdev_issue_copy(struct block_device *src_bdev, int nr,
+ struct range_entry *rlist, struct block_device *dest_bdev,
+ gfp_t gfp_mask, int flags)
+{
+ struct request_queue *src_q = bdev_get_queue(src_bdev);
+ struct request_queue *dest_q = bdev_get_queue(dest_bdev);
+ int ret = -EINVAL;
+
+ if (!src_q || !dest_q)
+ return -ENXIO;
+
+ if (!nr)
+ return -EINVAL;
+
+ if (nr >= MAX_COPY_NR_RANGE)
+ return -EINVAL;
+
+ if (bdev_read_only(dest_bdev))
+ return -EPERM;
+
+ ret = blk_copy_sanity_check(src_bdev, dest_bdev, rlist, nr);
+ if (ret)
+ return ret;
+
+ if (blk_check_copy_offload(src_q, dest_q))
+ ret = blk_copy_offload(src_bdev, nr, rlist, dest_bdev, gfp_mask);
+
+ return ret;
+}
+EXPORT_SYMBOL(blkdev_issue_copy);
+
/**
* __blkdev_issue_write_same - generate number of bios with same page
* @bdev: target blockdev
diff --git a/block/blk-settings.c b/block/blk-settings.c
index 818454552cf8..4c8d48b8af25 100644
--- a/block/blk-settings.c
+++ b/block/blk-settings.c
@@ -545,6 +545,8 @@ int blk_stack_limits(struct queue_limits *t, struct queue_limits *b,
t->max_segment_size = min_not_zero(t->max_segment_size,
b->max_segment_size);
+ t->max_copy_sectors = min_not_zero(t->max_copy_sectors, b->max_copy_sectors);
+
t->misaligned |= b->misaligned;
alignment = queue_limit_alignment_offset(b, start);
diff --git a/block/blk.h b/block/blk.h
index abb663a2a147..94d2b055750b 100644
--- a/block/blk.h
+++ b/block/blk.h
@@ -292,6 +292,8 @@ static inline bool blk_may_split(struct request_queue *q, struct bio *bio)
break;
}
+ if (unlikely(op_is_copy(bio->bi_opf)))
+ return false;
/*
* All drivers must accept single-segments bios that are <= PAGE_SIZE.
* This is a quick and dirty check that relies on the fact that
diff --git a/include/linux/blk_types.h b/include/linux/blk_types.h
index 5561e58d158a..0a3fee8ad61c 100644
--- a/include/linux/blk_types.h
+++ b/include/linux/blk_types.h
@@ -418,6 +418,7 @@ enum req_flag_bits {
/* for driver use */
__REQ_DRV,
__REQ_SWAP, /* swapping request. */
+ __REQ_COPY, /* copy request*/
__REQ_NR_BITS, /* stops here */
};
@@ -442,6 +443,7 @@ enum req_flag_bits {
#define REQ_DRV (1ULL << __REQ_DRV)
#define REQ_SWAP (1ULL << __REQ_SWAP)
+#define REQ_COPY (1ULL << __REQ_COPY)
#define REQ_FAILFAST_MASK \
(REQ_FAILFAST_DEV | REQ_FAILFAST_TRANSPORT | REQ_FAILFAST_DRIVER)
@@ -498,6 +500,11 @@ static inline bool op_is_discard(unsigned int op)
return (op & REQ_OP_MASK) == REQ_OP_DISCARD;
}
+static inline bool op_is_copy(unsigned int op)
+{
+ return (op & REQ_COPY);
+}
+
/*
* Check if a bio or request operation is a zone management operation, with
* the exception of REQ_OP_ZONE_RESET_ALL which is treated as a special case
@@ -532,4 +539,17 @@ struct blk_rq_stat {
u64 batch;
};
+struct cio {
+ atomic_t refcount;
+ blk_status_t io_err;
+ struct range_entry *rlist;
+ struct task_struct *waiter; /* waiting task (NULL if none) */
+};
+
+struct copy_ctx {
+ int range_idx;
+ sector_t start_sec;
+ struct cio *cio;
+};
+
#endif /* __LINUX_BLK_TYPES_H */
diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h
index f63ae50f1de3..15597488040c 100644
--- a/include/linux/blkdev.h
+++ b/include/linux/blkdev.h
@@ -1120,6 +1120,9 @@ extern int __blkdev_issue_discard(struct block_device *bdev, sector_t sector,
struct bio **biop);
struct bio *bio_map_kern(struct request_queue *q, void *data, unsigned int len,
gfp_t gfp_mask);
+int blkdev_issue_copy(struct block_device *src_bdev, int nr_srcs,
+ struct range_entry *src_rlist, struct block_device *dest_bdev,
+ gfp_t gfp_mask, int flags);
#define BLKDEV_ZERO_NOUNMAP (1 << 0) /* do not free blocks */
#define BLKDEV_ZERO_NOFALLBACK (1 << 1) /* don't write explicit zeroes */
diff --git a/include/uapi/linux/fs.h b/include/uapi/linux/fs.h
index bdf7b404b3e7..55bca8f6e8ed 100644
--- a/include/uapi/linux/fs.h
+++ b/include/uapi/linux/fs.h
@@ -64,6 +64,20 @@ struct fstrim_range {
__u64 minlen;
};
+/* Maximum no of entries supported */
+#define MAX_COPY_NR_RANGE (1 << 12)
+
+/* maximum total copy length */
+#define MAX_COPY_TOTAL_LENGTH (1 << 21)
+
+/* Source range entry for copy */
+struct range_entry {
+ __u64 src;
+ __u64 dst;
+ __u64 len;
+ __u64 comp_len;
+};
+
/* extent-same (dedupe) ioctls; these MUST match the btrfs ioctl definitions */
#define FILE_DEDUPE_RANGE_SAME 0
#define FILE_DEDUPE_RANGE_DIFFERS 1
--
2.30.0-rc0
--
dm-devel mailing list
dm-devel@redhat.com
https://listman.redhat.com/mailman/listinfo/dm-devel
^ permalink raw reply related [flat|nested] 272+ messages in thread* Re: [PATCH v2 03/10] block: Add copy offload support infrastructure
2022-02-07 14:13 ` [dm-devel] " Nitesh Shetty
(?)
@ 2022-02-07 22:45 ` kernel test robot
-1 siblings, 0 replies; 272+ messages in thread
From: kernel test robot @ 2022-02-07 22:45 UTC (permalink / raw)
To: Nitesh Shetty, mpatocka
Cc: kbuild-all, javier, chaitanyak, linux-block, linux-scsi,
dm-devel, linux-nvme, linux-fsdevel, axboe, msnitzer
Hi Nitesh,
Thank you for the patch! Perhaps something to improve:
[auto build test WARNING on axboe-block/for-next]
[also build test WARNING on next-20220207]
[If your patch is applied to the wrong git tree, kindly drop us a note.
And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch]
url: https://github.com/0day-ci/linux/commits/Nitesh-Shetty/block-make-bio_map_kern-non-static/20220207-231407
base: https://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux-block.git for-next
config: nios2-randconfig-r001-20220207 (https://download.01.org/0day-ci/archive/20220208/202202080650.48C9Ps00-lkp@intel.com/config)
compiler: nios2-linux-gcc (GCC) 11.2.0
reproduce (this is a W=1 build):
wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
chmod +x ~/bin/make.cross
# https://github.com/0day-ci/linux/commit/12a9801a7301f1a1e2ea355c5a4438dab17894cf
git remote add linux-review https://github.com/0day-ci/linux
git fetch --no-tags linux-review Nitesh-Shetty/block-make-bio_map_kern-non-static/20220207-231407
git checkout 12a9801a7301f1a1e2ea355c5a4438dab17894cf
# save the config file to linux build tree
mkdir build_dir
COMPILER_INSTALL_PATH=$HOME/0day COMPILER=gcc-11.2.0 make.cross O=build_dir ARCH=nios2 SHELL=/bin/bash
If you fix the issue, kindly add following tag as appropriate
Reported-by: kernel test robot <lkp@intel.com>
All warnings (new ones prefixed by >>):
>> block/blk-lib.c:185:5: warning: no previous prototype for 'blk_copy_offload' [-Wmissing-prototypes]
185 | int blk_copy_offload(struct block_device *src_bdev, int nr_srcs,
| ^~~~~~~~~~~~~~~~
vim +/blk_copy_offload +185 block/blk-lib.c
180
181 /*
182 * blk_copy_offload - Use device's native copy offload feature
183 * Go through user provide payload, prepare new payload based on device's copy offload limits.
184 */
> 185 int blk_copy_offload(struct block_device *src_bdev, int nr_srcs,
186 struct range_entry *rlist, struct block_device *dst_bdev, gfp_t gfp_mask)
187 {
188 struct request_queue *sq = bdev_get_queue(src_bdev);
189 struct request_queue *dq = bdev_get_queue(dst_bdev);
190 struct bio *read_bio, *write_bio;
191 struct copy_ctx *ctx;
192 struct cio *cio;
193 struct page *token;
194 sector_t src_blk, copy_len, dst_blk;
195 sector_t remaining, max_copy_len = LONG_MAX;
196 int ri = 0, ret = 0;
197
198 cio = kzalloc(sizeof(struct cio), GFP_KERNEL);
199 if (!cio)
200 return -ENOMEM;
201 atomic_set(&cio->refcount, 0);
202 cio->rlist = rlist;
203
204 max_copy_len = min3(max_copy_len, (sector_t)sq->limits.max_copy_sectors,
205 (sector_t)dq->limits.max_copy_sectors);
206 max_copy_len = min3(max_copy_len, (sector_t)sq->limits.max_copy_range_sectors,
207 (sector_t)dq->limits.max_copy_range_sectors) << SECTOR_SHIFT;
208
209 for (ri = 0; ri < nr_srcs; ri++) {
210 cio->rlist[ri].comp_len = rlist[ri].len;
211 for (remaining = rlist[ri].len, src_blk = rlist[ri].src, dst_blk = rlist[ri].dst;
212 remaining > 0;
213 remaining -= copy_len, src_blk += copy_len, dst_blk += copy_len) {
214 copy_len = min(remaining, max_copy_len);
215
216 token = alloc_page(gfp_mask);
217 if (unlikely(!token)) {
218 ret = -ENOMEM;
219 goto err_token;
220 }
221
222 read_bio = bio_alloc(src_bdev, 1, REQ_OP_READ | REQ_COPY | REQ_NOMERGE,
223 gfp_mask);
224 if (!read_bio) {
225 ret = -ENOMEM;
226 goto err_read_bio;
227 }
228 read_bio->bi_iter.bi_sector = src_blk >> SECTOR_SHIFT;
229 read_bio->bi_iter.bi_size = copy_len;
230 __bio_add_page(read_bio, token, PAGE_SIZE, 0);
231 ret = submit_bio_wait(read_bio);
232 if (ret) {
233 bio_put(read_bio);
234 goto err_read_bio;
235 }
236 bio_put(read_bio);
237 ctx = kzalloc(sizeof(struct copy_ctx), gfp_mask);
238 if (!ctx) {
239 ret = -ENOMEM;
240 goto err_read_bio;
241 }
242 ctx->cio = cio;
243 ctx->range_idx = ri;
244 ctx->start_sec = rlist[ri].src;
245
246 write_bio = bio_alloc(dst_bdev, 1, REQ_OP_WRITE | REQ_COPY | REQ_NOMERGE,
247 gfp_mask);
248 if (!write_bio) {
249 ret = -ENOMEM;
250 goto err_read_bio;
251 }
252
253 write_bio->bi_iter.bi_sector = dst_blk >> SECTOR_SHIFT;
254 write_bio->bi_iter.bi_size = copy_len;
255 __bio_add_page(write_bio, token, PAGE_SIZE, 0);
256 write_bio->bi_end_io = bio_copy_end_io;
257 write_bio->bi_private = ctx;
258 atomic_inc(&cio->refcount);
259 submit_bio(write_bio);
260 }
261 }
262
263 /* Wait for completion of all IO's*/
264 return cio_await_completion(cio);
265
266 err_read_bio:
267 __free_page(token);
268 err_token:
269 rlist[ri].comp_len = min_t(sector_t, rlist[ri].comp_len, (rlist[ri].len - remaining));
270
271 cio->io_err = ret;
272 return cio_await_completion(cio);
273 }
274
---
0-DAY CI Kernel Test Service, Intel Corporation
https://lists.01.org/hyperkitty/list/kbuild-all@lists.01.org
^ permalink raw reply [flat|nested] 272+ messages in thread* Re: [PATCH v2 03/10] block: Add copy offload support infrastructure
@ 2022-02-07 22:45 ` kernel test robot
0 siblings, 0 replies; 272+ messages in thread
From: kernel test robot @ 2022-02-07 22:45 UTC (permalink / raw)
To: kbuild-all
[-- Attachment #1: Type: text/plain, Size: 5496 bytes --]
Hi Nitesh,
Thank you for the patch! Perhaps something to improve:
[auto build test WARNING on axboe-block/for-next]
[also build test WARNING on next-20220207]
[If your patch is applied to the wrong git tree, kindly drop us a note.
And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch]
url: https://github.com/0day-ci/linux/commits/Nitesh-Shetty/block-make-bio_map_kern-non-static/20220207-231407
base: https://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux-block.git for-next
config: nios2-randconfig-r001-20220207 (https://download.01.org/0day-ci/archive/20220208/202202080650.48C9Ps00-lkp(a)intel.com/config)
compiler: nios2-linux-gcc (GCC) 11.2.0
reproduce (this is a W=1 build):
wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
chmod +x ~/bin/make.cross
# https://github.com/0day-ci/linux/commit/12a9801a7301f1a1e2ea355c5a4438dab17894cf
git remote add linux-review https://github.com/0day-ci/linux
git fetch --no-tags linux-review Nitesh-Shetty/block-make-bio_map_kern-non-static/20220207-231407
git checkout 12a9801a7301f1a1e2ea355c5a4438dab17894cf
# save the config file to linux build tree
mkdir build_dir
COMPILER_INSTALL_PATH=$HOME/0day COMPILER=gcc-11.2.0 make.cross O=build_dir ARCH=nios2 SHELL=/bin/bash
If you fix the issue, kindly add following tag as appropriate
Reported-by: kernel test robot <lkp@intel.com>
All warnings (new ones prefixed by >>):
>> block/blk-lib.c:185:5: warning: no previous prototype for 'blk_copy_offload' [-Wmissing-prototypes]
185 | int blk_copy_offload(struct block_device *src_bdev, int nr_srcs,
| ^~~~~~~~~~~~~~~~
vim +/blk_copy_offload +185 block/blk-lib.c
180
181 /*
182 * blk_copy_offload - Use device's native copy offload feature
183 * Go through user provide payload, prepare new payload based on device's copy offload limits.
184 */
> 185 int blk_copy_offload(struct block_device *src_bdev, int nr_srcs,
186 struct range_entry *rlist, struct block_device *dst_bdev, gfp_t gfp_mask)
187 {
188 struct request_queue *sq = bdev_get_queue(src_bdev);
189 struct request_queue *dq = bdev_get_queue(dst_bdev);
190 struct bio *read_bio, *write_bio;
191 struct copy_ctx *ctx;
192 struct cio *cio;
193 struct page *token;
194 sector_t src_blk, copy_len, dst_blk;
195 sector_t remaining, max_copy_len = LONG_MAX;
196 int ri = 0, ret = 0;
197
198 cio = kzalloc(sizeof(struct cio), GFP_KERNEL);
199 if (!cio)
200 return -ENOMEM;
201 atomic_set(&cio->refcount, 0);
202 cio->rlist = rlist;
203
204 max_copy_len = min3(max_copy_len, (sector_t)sq->limits.max_copy_sectors,
205 (sector_t)dq->limits.max_copy_sectors);
206 max_copy_len = min3(max_copy_len, (sector_t)sq->limits.max_copy_range_sectors,
207 (sector_t)dq->limits.max_copy_range_sectors) << SECTOR_SHIFT;
208
209 for (ri = 0; ri < nr_srcs; ri++) {
210 cio->rlist[ri].comp_len = rlist[ri].len;
211 for (remaining = rlist[ri].len, src_blk = rlist[ri].src, dst_blk = rlist[ri].dst;
212 remaining > 0;
213 remaining -= copy_len, src_blk += copy_len, dst_blk += copy_len) {
214 copy_len = min(remaining, max_copy_len);
215
216 token = alloc_page(gfp_mask);
217 if (unlikely(!token)) {
218 ret = -ENOMEM;
219 goto err_token;
220 }
221
222 read_bio = bio_alloc(src_bdev, 1, REQ_OP_READ | REQ_COPY | REQ_NOMERGE,
223 gfp_mask);
224 if (!read_bio) {
225 ret = -ENOMEM;
226 goto err_read_bio;
227 }
228 read_bio->bi_iter.bi_sector = src_blk >> SECTOR_SHIFT;
229 read_bio->bi_iter.bi_size = copy_len;
230 __bio_add_page(read_bio, token, PAGE_SIZE, 0);
231 ret = submit_bio_wait(read_bio);
232 if (ret) {
233 bio_put(read_bio);
234 goto err_read_bio;
235 }
236 bio_put(read_bio);
237 ctx = kzalloc(sizeof(struct copy_ctx), gfp_mask);
238 if (!ctx) {
239 ret = -ENOMEM;
240 goto err_read_bio;
241 }
242 ctx->cio = cio;
243 ctx->range_idx = ri;
244 ctx->start_sec = rlist[ri].src;
245
246 write_bio = bio_alloc(dst_bdev, 1, REQ_OP_WRITE | REQ_COPY | REQ_NOMERGE,
247 gfp_mask);
248 if (!write_bio) {
249 ret = -ENOMEM;
250 goto err_read_bio;
251 }
252
253 write_bio->bi_iter.bi_sector = dst_blk >> SECTOR_SHIFT;
254 write_bio->bi_iter.bi_size = copy_len;
255 __bio_add_page(write_bio, token, PAGE_SIZE, 0);
256 write_bio->bi_end_io = bio_copy_end_io;
257 write_bio->bi_private = ctx;
258 atomic_inc(&cio->refcount);
259 submit_bio(write_bio);
260 }
261 }
262
263 /* Wait for completion of all IO's*/
264 return cio_await_completion(cio);
265
266 err_read_bio:
267 __free_page(token);
268 err_token:
269 rlist[ri].comp_len = min_t(sector_t, rlist[ri].comp_len, (rlist[ri].len - remaining));
270
271 cio->io_err = ret;
272 return cio_await_completion(cio);
273 }
274
---
0-DAY CI Kernel Test Service, Intel Corporation
https://lists.01.org/hyperkitty/list/kbuild-all(a)lists.01.org
^ permalink raw reply [flat|nested] 272+ messages in thread* Re: [dm-devel] [PATCH v2 03/10] block: Add copy offload support infrastructure
@ 2022-02-07 22:45 ` kernel test robot
0 siblings, 0 replies; 272+ messages in thread
From: kernel test robot @ 2022-02-07 22:45 UTC (permalink / raw)
To: Nitesh Shetty, mpatocka
Cc: axboe, javier, msnitzer, kbuild-all, linux-scsi, chaitanyak,
linux-nvme, linux-block, dm-devel, linux-fsdevel
Hi Nitesh,
Thank you for the patch! Perhaps something to improve:
[auto build test WARNING on axboe-block/for-next]
[also build test WARNING on next-20220207]
[If your patch is applied to the wrong git tree, kindly drop us a note.
And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch]
url: https://github.com/0day-ci/linux/commits/Nitesh-Shetty/block-make-bio_map_kern-non-static/20220207-231407
base: https://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux-block.git for-next
config: nios2-randconfig-r001-20220207 (https://download.01.org/0day-ci/archive/20220208/202202080650.48C9Ps00-lkp@intel.com/config)
compiler: nios2-linux-gcc (GCC) 11.2.0
reproduce (this is a W=1 build):
wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
chmod +x ~/bin/make.cross
# https://github.com/0day-ci/linux/commit/12a9801a7301f1a1e2ea355c5a4438dab17894cf
git remote add linux-review https://github.com/0day-ci/linux
git fetch --no-tags linux-review Nitesh-Shetty/block-make-bio_map_kern-non-static/20220207-231407
git checkout 12a9801a7301f1a1e2ea355c5a4438dab17894cf
# save the config file to linux build tree
mkdir build_dir
COMPILER_INSTALL_PATH=$HOME/0day COMPILER=gcc-11.2.0 make.cross O=build_dir ARCH=nios2 SHELL=/bin/bash
If you fix the issue, kindly add following tag as appropriate
Reported-by: kernel test robot <lkp@intel.com>
All warnings (new ones prefixed by >>):
>> block/blk-lib.c:185:5: warning: no previous prototype for 'blk_copy_offload' [-Wmissing-prototypes]
185 | int blk_copy_offload(struct block_device *src_bdev, int nr_srcs,
| ^~~~~~~~~~~~~~~~
vim +/blk_copy_offload +185 block/blk-lib.c
180
181 /*
182 * blk_copy_offload - Use device's native copy offload feature
183 * Go through user provide payload, prepare new payload based on device's copy offload limits.
184 */
> 185 int blk_copy_offload(struct block_device *src_bdev, int nr_srcs,
186 struct range_entry *rlist, struct block_device *dst_bdev, gfp_t gfp_mask)
187 {
188 struct request_queue *sq = bdev_get_queue(src_bdev);
189 struct request_queue *dq = bdev_get_queue(dst_bdev);
190 struct bio *read_bio, *write_bio;
191 struct copy_ctx *ctx;
192 struct cio *cio;
193 struct page *token;
194 sector_t src_blk, copy_len, dst_blk;
195 sector_t remaining, max_copy_len = LONG_MAX;
196 int ri = 0, ret = 0;
197
198 cio = kzalloc(sizeof(struct cio), GFP_KERNEL);
199 if (!cio)
200 return -ENOMEM;
201 atomic_set(&cio->refcount, 0);
202 cio->rlist = rlist;
203
204 max_copy_len = min3(max_copy_len, (sector_t)sq->limits.max_copy_sectors,
205 (sector_t)dq->limits.max_copy_sectors);
206 max_copy_len = min3(max_copy_len, (sector_t)sq->limits.max_copy_range_sectors,
207 (sector_t)dq->limits.max_copy_range_sectors) << SECTOR_SHIFT;
208
209 for (ri = 0; ri < nr_srcs; ri++) {
210 cio->rlist[ri].comp_len = rlist[ri].len;
211 for (remaining = rlist[ri].len, src_blk = rlist[ri].src, dst_blk = rlist[ri].dst;
212 remaining > 0;
213 remaining -= copy_len, src_blk += copy_len, dst_blk += copy_len) {
214 copy_len = min(remaining, max_copy_len);
215
216 token = alloc_page(gfp_mask);
217 if (unlikely(!token)) {
218 ret = -ENOMEM;
219 goto err_token;
220 }
221
222 read_bio = bio_alloc(src_bdev, 1, REQ_OP_READ | REQ_COPY | REQ_NOMERGE,
223 gfp_mask);
224 if (!read_bio) {
225 ret = -ENOMEM;
226 goto err_read_bio;
227 }
228 read_bio->bi_iter.bi_sector = src_blk >> SECTOR_SHIFT;
229 read_bio->bi_iter.bi_size = copy_len;
230 __bio_add_page(read_bio, token, PAGE_SIZE, 0);
231 ret = submit_bio_wait(read_bio);
232 if (ret) {
233 bio_put(read_bio);
234 goto err_read_bio;
235 }
236 bio_put(read_bio);
237 ctx = kzalloc(sizeof(struct copy_ctx), gfp_mask);
238 if (!ctx) {
239 ret = -ENOMEM;
240 goto err_read_bio;
241 }
242 ctx->cio = cio;
243 ctx->range_idx = ri;
244 ctx->start_sec = rlist[ri].src;
245
246 write_bio = bio_alloc(dst_bdev, 1, REQ_OP_WRITE | REQ_COPY | REQ_NOMERGE,
247 gfp_mask);
248 if (!write_bio) {
249 ret = -ENOMEM;
250 goto err_read_bio;
251 }
252
253 write_bio->bi_iter.bi_sector = dst_blk >> SECTOR_SHIFT;
254 write_bio->bi_iter.bi_size = copy_len;
255 __bio_add_page(write_bio, token, PAGE_SIZE, 0);
256 write_bio->bi_end_io = bio_copy_end_io;
257 write_bio->bi_private = ctx;
258 atomic_inc(&cio->refcount);
259 submit_bio(write_bio);
260 }
261 }
262
263 /* Wait for completion of all IO's*/
264 return cio_await_completion(cio);
265
266 err_read_bio:
267 __free_page(token);
268 err_token:
269 rlist[ri].comp_len = min_t(sector_t, rlist[ri].comp_len, (rlist[ri].len - remaining));
270
271 cio->io_err = ret;
272 return cio_await_completion(cio);
273 }
274
---
0-DAY CI Kernel Test Service, Intel Corporation
https://lists.01.org/hyperkitty/list/kbuild-all@lists.01.org
--
dm-devel mailing list
dm-devel@redhat.com
https://listman.redhat.com/mailman/listinfo/dm-devel
^ permalink raw reply [flat|nested] 272+ messages in thread
* Re: [PATCH v2 03/10] block: Add copy offload support infrastructure
2022-02-07 14:13 ` [dm-devel] " Nitesh Shetty
(?)
@ 2022-02-07 23:26 ` kernel test robot
-1 siblings, 0 replies; 272+ messages in thread
From: kernel test robot @ 2022-02-07 23:26 UTC (permalink / raw)
To: Nitesh Shetty, mpatocka
Cc: llvm, kbuild-all, javier, chaitanyak, linux-block, linux-scsi,
dm-devel, linux-nvme, linux-fsdevel, axboe, msnitzer
Hi Nitesh,
Thank you for the patch! Perhaps something to improve:
[auto build test WARNING on axboe-block/for-next]
[also build test WARNING on next-20220207]
[If your patch is applied to the wrong git tree, kindly drop us a note.
And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch]
url: https://github.com/0day-ci/linux/commits/Nitesh-Shetty/block-make-bio_map_kern-non-static/20220207-231407
base: https://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux-block.git for-next
config: hexagon-randconfig-r045-20220207 (https://download.01.org/0day-ci/archive/20220208/202202080735.lyaEe5Bq-lkp@intel.com/config)
compiler: clang version 15.0.0 (https://github.com/llvm/llvm-project 0d8850ae2cae85d49bea6ae0799fa41c7202c05c)
reproduce (this is a W=1 build):
wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
chmod +x ~/bin/make.cross
# https://github.com/0day-ci/linux/commit/12a9801a7301f1a1e2ea355c5a4438dab17894cf
git remote add linux-review https://github.com/0day-ci/linux
git fetch --no-tags linux-review Nitesh-Shetty/block-make-bio_map_kern-non-static/20220207-231407
git checkout 12a9801a7301f1a1e2ea355c5a4438dab17894cf
# save the config file to linux build tree
mkdir build_dir
COMPILER_INSTALL_PATH=$HOME/0day COMPILER=clang make.cross W=1 O=build_dir ARCH=hexagon SHELL=/bin/bash
If you fix the issue, kindly add following tag as appropriate
Reported-by: kernel test robot <lkp@intel.com>
All warnings (new ones prefixed by >>):
>> block/blk-lib.c:185:5: warning: no previous prototype for function 'blk_copy_offload' [-Wmissing-prototypes]
int blk_copy_offload(struct block_device *src_bdev, int nr_srcs,
^
block/blk-lib.c:185:1: note: declare 'static' if the function is not intended to be used outside of this translation unit
int blk_copy_offload(struct block_device *src_bdev, int nr_srcs,
^
static
1 warning generated.
vim +/blk_copy_offload +185 block/blk-lib.c
180
181 /*
182 * blk_copy_offload - Use device's native copy offload feature
183 * Go through user provide payload, prepare new payload based on device's copy offload limits.
184 */
> 185 int blk_copy_offload(struct block_device *src_bdev, int nr_srcs,
186 struct range_entry *rlist, struct block_device *dst_bdev, gfp_t gfp_mask)
187 {
188 struct request_queue *sq = bdev_get_queue(src_bdev);
189 struct request_queue *dq = bdev_get_queue(dst_bdev);
190 struct bio *read_bio, *write_bio;
191 struct copy_ctx *ctx;
192 struct cio *cio;
193 struct page *token;
194 sector_t src_blk, copy_len, dst_blk;
195 sector_t remaining, max_copy_len = LONG_MAX;
196 int ri = 0, ret = 0;
197
198 cio = kzalloc(sizeof(struct cio), GFP_KERNEL);
199 if (!cio)
200 return -ENOMEM;
201 atomic_set(&cio->refcount, 0);
202 cio->rlist = rlist;
203
204 max_copy_len = min3(max_copy_len, (sector_t)sq->limits.max_copy_sectors,
205 (sector_t)dq->limits.max_copy_sectors);
206 max_copy_len = min3(max_copy_len, (sector_t)sq->limits.max_copy_range_sectors,
207 (sector_t)dq->limits.max_copy_range_sectors) << SECTOR_SHIFT;
208
209 for (ri = 0; ri < nr_srcs; ri++) {
210 cio->rlist[ri].comp_len = rlist[ri].len;
211 for (remaining = rlist[ri].len, src_blk = rlist[ri].src, dst_blk = rlist[ri].dst;
212 remaining > 0;
213 remaining -= copy_len, src_blk += copy_len, dst_blk += copy_len) {
214 copy_len = min(remaining, max_copy_len);
215
216 token = alloc_page(gfp_mask);
217 if (unlikely(!token)) {
218 ret = -ENOMEM;
219 goto err_token;
220 }
221
222 read_bio = bio_alloc(src_bdev, 1, REQ_OP_READ | REQ_COPY | REQ_NOMERGE,
223 gfp_mask);
224 if (!read_bio) {
225 ret = -ENOMEM;
226 goto err_read_bio;
227 }
228 read_bio->bi_iter.bi_sector = src_blk >> SECTOR_SHIFT;
229 read_bio->bi_iter.bi_size = copy_len;
230 __bio_add_page(read_bio, token, PAGE_SIZE, 0);
231 ret = submit_bio_wait(read_bio);
232 if (ret) {
233 bio_put(read_bio);
234 goto err_read_bio;
235 }
236 bio_put(read_bio);
237 ctx = kzalloc(sizeof(struct copy_ctx), gfp_mask);
238 if (!ctx) {
239 ret = -ENOMEM;
240 goto err_read_bio;
241 }
242 ctx->cio = cio;
243 ctx->range_idx = ri;
244 ctx->start_sec = rlist[ri].src;
245
246 write_bio = bio_alloc(dst_bdev, 1, REQ_OP_WRITE | REQ_COPY | REQ_NOMERGE,
247 gfp_mask);
248 if (!write_bio) {
249 ret = -ENOMEM;
250 goto err_read_bio;
251 }
252
253 write_bio->bi_iter.bi_sector = dst_blk >> SECTOR_SHIFT;
254 write_bio->bi_iter.bi_size = copy_len;
255 __bio_add_page(write_bio, token, PAGE_SIZE, 0);
256 write_bio->bi_end_io = bio_copy_end_io;
257 write_bio->bi_private = ctx;
258 atomic_inc(&cio->refcount);
259 submit_bio(write_bio);
260 }
261 }
262
263 /* Wait for completion of all IO's*/
264 return cio_await_completion(cio);
265
266 err_read_bio:
267 __free_page(token);
268 err_token:
269 rlist[ri].comp_len = min_t(sector_t, rlist[ri].comp_len, (rlist[ri].len - remaining));
270
271 cio->io_err = ret;
272 return cio_await_completion(cio);
273 }
274
---
0-DAY CI Kernel Test Service, Intel Corporation
https://lists.01.org/hyperkitty/list/kbuild-all@lists.01.org
^ permalink raw reply [flat|nested] 272+ messages in thread* Re: [PATCH v2 03/10] block: Add copy offload support infrastructure
@ 2022-02-07 23:26 ` kernel test robot
0 siblings, 0 replies; 272+ messages in thread
From: kernel test robot @ 2022-02-07 23:26 UTC (permalink / raw)
To: kbuild-all
[-- Attachment #1: Type: text/plain, Size: 5787 bytes --]
Hi Nitesh,
Thank you for the patch! Perhaps something to improve:
[auto build test WARNING on axboe-block/for-next]
[also build test WARNING on next-20220207]
[If your patch is applied to the wrong git tree, kindly drop us a note.
And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch]
url: https://github.com/0day-ci/linux/commits/Nitesh-Shetty/block-make-bio_map_kern-non-static/20220207-231407
base: https://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux-block.git for-next
config: hexagon-randconfig-r045-20220207 (https://download.01.org/0day-ci/archive/20220208/202202080735.lyaEe5Bq-lkp(a)intel.com/config)
compiler: clang version 15.0.0 (https://github.com/llvm/llvm-project 0d8850ae2cae85d49bea6ae0799fa41c7202c05c)
reproduce (this is a W=1 build):
wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
chmod +x ~/bin/make.cross
# https://github.com/0day-ci/linux/commit/12a9801a7301f1a1e2ea355c5a4438dab17894cf
git remote add linux-review https://github.com/0day-ci/linux
git fetch --no-tags linux-review Nitesh-Shetty/block-make-bio_map_kern-non-static/20220207-231407
git checkout 12a9801a7301f1a1e2ea355c5a4438dab17894cf
# save the config file to linux build tree
mkdir build_dir
COMPILER_INSTALL_PATH=$HOME/0day COMPILER=clang make.cross W=1 O=build_dir ARCH=hexagon SHELL=/bin/bash
If you fix the issue, kindly add following tag as appropriate
Reported-by: kernel test robot <lkp@intel.com>
All warnings (new ones prefixed by >>):
>> block/blk-lib.c:185:5: warning: no previous prototype for function 'blk_copy_offload' [-Wmissing-prototypes]
int blk_copy_offload(struct block_device *src_bdev, int nr_srcs,
^
block/blk-lib.c:185:1: note: declare 'static' if the function is not intended to be used outside of this translation unit
int blk_copy_offload(struct block_device *src_bdev, int nr_srcs,
^
static
1 warning generated.
vim +/blk_copy_offload +185 block/blk-lib.c
180
181 /*
182 * blk_copy_offload - Use device's native copy offload feature
183 * Go through user provide payload, prepare new payload based on device's copy offload limits.
184 */
> 185 int blk_copy_offload(struct block_device *src_bdev, int nr_srcs,
186 struct range_entry *rlist, struct block_device *dst_bdev, gfp_t gfp_mask)
187 {
188 struct request_queue *sq = bdev_get_queue(src_bdev);
189 struct request_queue *dq = bdev_get_queue(dst_bdev);
190 struct bio *read_bio, *write_bio;
191 struct copy_ctx *ctx;
192 struct cio *cio;
193 struct page *token;
194 sector_t src_blk, copy_len, dst_blk;
195 sector_t remaining, max_copy_len = LONG_MAX;
196 int ri = 0, ret = 0;
197
198 cio = kzalloc(sizeof(struct cio), GFP_KERNEL);
199 if (!cio)
200 return -ENOMEM;
201 atomic_set(&cio->refcount, 0);
202 cio->rlist = rlist;
203
204 max_copy_len = min3(max_copy_len, (sector_t)sq->limits.max_copy_sectors,
205 (sector_t)dq->limits.max_copy_sectors);
206 max_copy_len = min3(max_copy_len, (sector_t)sq->limits.max_copy_range_sectors,
207 (sector_t)dq->limits.max_copy_range_sectors) << SECTOR_SHIFT;
208
209 for (ri = 0; ri < nr_srcs; ri++) {
210 cio->rlist[ri].comp_len = rlist[ri].len;
211 for (remaining = rlist[ri].len, src_blk = rlist[ri].src, dst_blk = rlist[ri].dst;
212 remaining > 0;
213 remaining -= copy_len, src_blk += copy_len, dst_blk += copy_len) {
214 copy_len = min(remaining, max_copy_len);
215
216 token = alloc_page(gfp_mask);
217 if (unlikely(!token)) {
218 ret = -ENOMEM;
219 goto err_token;
220 }
221
222 read_bio = bio_alloc(src_bdev, 1, REQ_OP_READ | REQ_COPY | REQ_NOMERGE,
223 gfp_mask);
224 if (!read_bio) {
225 ret = -ENOMEM;
226 goto err_read_bio;
227 }
228 read_bio->bi_iter.bi_sector = src_blk >> SECTOR_SHIFT;
229 read_bio->bi_iter.bi_size = copy_len;
230 __bio_add_page(read_bio, token, PAGE_SIZE, 0);
231 ret = submit_bio_wait(read_bio);
232 if (ret) {
233 bio_put(read_bio);
234 goto err_read_bio;
235 }
236 bio_put(read_bio);
237 ctx = kzalloc(sizeof(struct copy_ctx), gfp_mask);
238 if (!ctx) {
239 ret = -ENOMEM;
240 goto err_read_bio;
241 }
242 ctx->cio = cio;
243 ctx->range_idx = ri;
244 ctx->start_sec = rlist[ri].src;
245
246 write_bio = bio_alloc(dst_bdev, 1, REQ_OP_WRITE | REQ_COPY | REQ_NOMERGE,
247 gfp_mask);
248 if (!write_bio) {
249 ret = -ENOMEM;
250 goto err_read_bio;
251 }
252
253 write_bio->bi_iter.bi_sector = dst_blk >> SECTOR_SHIFT;
254 write_bio->bi_iter.bi_size = copy_len;
255 __bio_add_page(write_bio, token, PAGE_SIZE, 0);
256 write_bio->bi_end_io = bio_copy_end_io;
257 write_bio->bi_private = ctx;
258 atomic_inc(&cio->refcount);
259 submit_bio(write_bio);
260 }
261 }
262
263 /* Wait for completion of all IO's*/
264 return cio_await_completion(cio);
265
266 err_read_bio:
267 __free_page(token);
268 err_token:
269 rlist[ri].comp_len = min_t(sector_t, rlist[ri].comp_len, (rlist[ri].len - remaining));
270
271 cio->io_err = ret;
272 return cio_await_completion(cio);
273 }
274
---
0-DAY CI Kernel Test Service, Intel Corporation
https://lists.01.org/hyperkitty/list/kbuild-all(a)lists.01.org
^ permalink raw reply [flat|nested] 272+ messages in thread* Re: [dm-devel] [PATCH v2 03/10] block: Add copy offload support infrastructure
@ 2022-02-07 23:26 ` kernel test robot
0 siblings, 0 replies; 272+ messages in thread
From: kernel test robot @ 2022-02-07 23:26 UTC (permalink / raw)
To: Nitesh Shetty, mpatocka
Cc: axboe, javier, msnitzer, kbuild-all, linux-scsi, llvm,
chaitanyak, linux-nvme, linux-block, dm-devel, linux-fsdevel
Hi Nitesh,
Thank you for the patch! Perhaps something to improve:
[auto build test WARNING on axboe-block/for-next]
[also build test WARNING on next-20220207]
[If your patch is applied to the wrong git tree, kindly drop us a note.
And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch]
url: https://github.com/0day-ci/linux/commits/Nitesh-Shetty/block-make-bio_map_kern-non-static/20220207-231407
base: https://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux-block.git for-next
config: hexagon-randconfig-r045-20220207 (https://download.01.org/0day-ci/archive/20220208/202202080735.lyaEe5Bq-lkp@intel.com/config)
compiler: clang version 15.0.0 (https://github.com/llvm/llvm-project 0d8850ae2cae85d49bea6ae0799fa41c7202c05c)
reproduce (this is a W=1 build):
wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
chmod +x ~/bin/make.cross
# https://github.com/0day-ci/linux/commit/12a9801a7301f1a1e2ea355c5a4438dab17894cf
git remote add linux-review https://github.com/0day-ci/linux
git fetch --no-tags linux-review Nitesh-Shetty/block-make-bio_map_kern-non-static/20220207-231407
git checkout 12a9801a7301f1a1e2ea355c5a4438dab17894cf
# save the config file to linux build tree
mkdir build_dir
COMPILER_INSTALL_PATH=$HOME/0day COMPILER=clang make.cross W=1 O=build_dir ARCH=hexagon SHELL=/bin/bash
If you fix the issue, kindly add following tag as appropriate
Reported-by: kernel test robot <lkp@intel.com>
All warnings (new ones prefixed by >>):
>> block/blk-lib.c:185:5: warning: no previous prototype for function 'blk_copy_offload' [-Wmissing-prototypes]
int blk_copy_offload(struct block_device *src_bdev, int nr_srcs,
^
block/blk-lib.c:185:1: note: declare 'static' if the function is not intended to be used outside of this translation unit
int blk_copy_offload(struct block_device *src_bdev, int nr_srcs,
^
static
1 warning generated.
vim +/blk_copy_offload +185 block/blk-lib.c
180
181 /*
182 * blk_copy_offload - Use device's native copy offload feature
183 * Go through user provide payload, prepare new payload based on device's copy offload limits.
184 */
> 185 int blk_copy_offload(struct block_device *src_bdev, int nr_srcs,
186 struct range_entry *rlist, struct block_device *dst_bdev, gfp_t gfp_mask)
187 {
188 struct request_queue *sq = bdev_get_queue(src_bdev);
189 struct request_queue *dq = bdev_get_queue(dst_bdev);
190 struct bio *read_bio, *write_bio;
191 struct copy_ctx *ctx;
192 struct cio *cio;
193 struct page *token;
194 sector_t src_blk, copy_len, dst_blk;
195 sector_t remaining, max_copy_len = LONG_MAX;
196 int ri = 0, ret = 0;
197
198 cio = kzalloc(sizeof(struct cio), GFP_KERNEL);
199 if (!cio)
200 return -ENOMEM;
201 atomic_set(&cio->refcount, 0);
202 cio->rlist = rlist;
203
204 max_copy_len = min3(max_copy_len, (sector_t)sq->limits.max_copy_sectors,
205 (sector_t)dq->limits.max_copy_sectors);
206 max_copy_len = min3(max_copy_len, (sector_t)sq->limits.max_copy_range_sectors,
207 (sector_t)dq->limits.max_copy_range_sectors) << SECTOR_SHIFT;
208
209 for (ri = 0; ri < nr_srcs; ri++) {
210 cio->rlist[ri].comp_len = rlist[ri].len;
211 for (remaining = rlist[ri].len, src_blk = rlist[ri].src, dst_blk = rlist[ri].dst;
212 remaining > 0;
213 remaining -= copy_len, src_blk += copy_len, dst_blk += copy_len) {
214 copy_len = min(remaining, max_copy_len);
215
216 token = alloc_page(gfp_mask);
217 if (unlikely(!token)) {
218 ret = -ENOMEM;
219 goto err_token;
220 }
221
222 read_bio = bio_alloc(src_bdev, 1, REQ_OP_READ | REQ_COPY | REQ_NOMERGE,
223 gfp_mask);
224 if (!read_bio) {
225 ret = -ENOMEM;
226 goto err_read_bio;
227 }
228 read_bio->bi_iter.bi_sector = src_blk >> SECTOR_SHIFT;
229 read_bio->bi_iter.bi_size = copy_len;
230 __bio_add_page(read_bio, token, PAGE_SIZE, 0);
231 ret = submit_bio_wait(read_bio);
232 if (ret) {
233 bio_put(read_bio);
234 goto err_read_bio;
235 }
236 bio_put(read_bio);
237 ctx = kzalloc(sizeof(struct copy_ctx), gfp_mask);
238 if (!ctx) {
239 ret = -ENOMEM;
240 goto err_read_bio;
241 }
242 ctx->cio = cio;
243 ctx->range_idx = ri;
244 ctx->start_sec = rlist[ri].src;
245
246 write_bio = bio_alloc(dst_bdev, 1, REQ_OP_WRITE | REQ_COPY | REQ_NOMERGE,
247 gfp_mask);
248 if (!write_bio) {
249 ret = -ENOMEM;
250 goto err_read_bio;
251 }
252
253 write_bio->bi_iter.bi_sector = dst_blk >> SECTOR_SHIFT;
254 write_bio->bi_iter.bi_size = copy_len;
255 __bio_add_page(write_bio, token, PAGE_SIZE, 0);
256 write_bio->bi_end_io = bio_copy_end_io;
257 write_bio->bi_private = ctx;
258 atomic_inc(&cio->refcount);
259 submit_bio(write_bio);
260 }
261 }
262
263 /* Wait for completion of all IO's*/
264 return cio_await_completion(cio);
265
266 err_read_bio:
267 __free_page(token);
268 err_token:
269 rlist[ri].comp_len = min_t(sector_t, rlist[ri].comp_len, (rlist[ri].len - remaining));
270
271 cio->io_err = ret;
272 return cio_await_completion(cio);
273 }
274
---
0-DAY CI Kernel Test Service, Intel Corporation
https://lists.01.org/hyperkitty/list/kbuild-all@lists.01.org
--
dm-devel mailing list
dm-devel@redhat.com
https://listman.redhat.com/mailman/listinfo/dm-devel
^ permalink raw reply [flat|nested] 272+ messages in thread
* Re: [PATCH v2 03/10] block: Add copy offload support infrastructure
2022-02-07 14:13 ` [dm-devel] " Nitesh Shetty
@ 2022-02-08 7:21 ` Damien Le Moal
-1 siblings, 0 replies; 272+ messages in thread
From: Damien Le Moal @ 2022-02-08 7:21 UTC (permalink / raw)
To: Nitesh Shetty, mpatocka
Cc: javier, chaitanyak, linux-block, linux-scsi, dm-devel,
linux-nvme, linux-fsdevel, axboe, msnitzer, bvanassche,
martin.petersen, roland, hare, kbusch, hch, Frederick.Knight,
osandov, djwong, josef, clm, dsterba, tytso, jack, joshi.k,
arnav.dawn, SelvaKumar S
On 2/7/22 23:13, Nitesh Shetty wrote:
> Introduce blkdev_issue_copy which supports source and destination bdevs,
> and a array of (source, destination and copy length) tuples.
s/a/an
> Introduce REQ_COP copy offload operation flag. Create a read-write
REQ_COPY ?
> bio pair with a token as payload and submitted to the device in order.
> the read request populates token with source specific information which
> is then passed with write request.
> Ths design is courtsey Mikulas Patocka<mpatocka@>'s token based copy
s/Ths design is courtsey/This design is courtesy of
>
> Larger copy operation may be divided if necessary by looking at device
> limits.
may or will ?
by looking at -> depending on the ?
>
> Signed-off-by: Nitesh Shetty <nj.shetty@samsung.com>
> Signed-off-by: SelvaKumar S <selvakuma.s1@samsung.com>
> Signed-off-by: Arnav Dawn <arnav.dawn@samsung.com>
> ---
> block/blk-lib.c | 216 ++++++++++++++++++++++++++++++++++++++
> block/blk-settings.c | 2 +
> block/blk.h | 2 +
> include/linux/blk_types.h | 20 ++++
> include/linux/blkdev.h | 3 +
> include/uapi/linux/fs.h | 14 +++
> 6 files changed, 257 insertions(+)
>
> diff --git a/block/blk-lib.c b/block/blk-lib.c
> index 1b8ced45e4e5..3ae2c27b566e 100644
> --- a/block/blk-lib.c
> +++ b/block/blk-lib.c
> @@ -135,6 +135,222 @@ int blkdev_issue_discard(struct block_device *bdev, sector_t sector,
> }
> EXPORT_SYMBOL(blkdev_issue_discard);
>
> +/*
> + * Wait on and process all in-flight BIOs. This must only be called once
> + * all bios have been issued so that the refcount can only decrease.
> + * This just waits for all bios to make it through bio_copy_end_io. IO
> + * errors are propagated through cio->io_error.
> + */
> +static int cio_await_completion(struct cio *cio)
> +{
> + int ret = 0;
> +
> + while (atomic_read(&cio->refcount)) {
> + cio->waiter = current;
> + __set_current_state(TASK_UNINTERRUPTIBLE);
> + blk_io_schedule();
> + /* wake up sets us TASK_RUNNING */
> + cio->waiter = NULL;
> + ret = cio->io_err;
Why is this in the loop ?
> + }
> + kvfree(cio);
> +
> + return ret;
> +}
> +
> +static void bio_copy_end_io(struct bio *bio)
> +{
> + struct copy_ctx *ctx = bio->bi_private;
> + struct cio *cio = ctx->cio;
> + sector_t clen;
> + int ri = ctx->range_idx;
> +
> + if (bio->bi_status) {
> + cio->io_err = bio->bi_status;
> + clen = (bio->bi_iter.bi_sector - ctx->start_sec) << SECTOR_SHIFT;
> + cio->rlist[ri].comp_len = min_t(sector_t, clen, cio->rlist[ri].comp_len);
> + }
> + __free_page(bio->bi_io_vec[0].bv_page);
> + kfree(ctx);
> + bio_put(bio);
> +
> + if (atomic_dec_and_test(&cio->refcount) && cio->waiter)
> + wake_up_process(cio->waiter);
This looks racy: the cio->waiter test and wakeup are not atomic.
> +}
> +
> +/*
> + * blk_copy_offload - Use device's native copy offload feature
> + * Go through user provide payload, prepare new payload based on device's copy offload limits.
> + */
> +int blk_copy_offload(struct block_device *src_bdev, int nr_srcs,
> + struct range_entry *rlist, struct block_device *dst_bdev, gfp_t gfp_mask)
> +{
> + struct request_queue *sq = bdev_get_queue(src_bdev);
> + struct request_queue *dq = bdev_get_queue(dst_bdev);
> + struct bio *read_bio, *write_bio;
> + struct copy_ctx *ctx;
> + struct cio *cio;
> + struct page *token;
> + sector_t src_blk, copy_len, dst_blk;
> + sector_t remaining, max_copy_len = LONG_MAX;
> + int ri = 0, ret = 0;
> +
> + cio = kzalloc(sizeof(struct cio), GFP_KERNEL);
> + if (!cio)
> + return -ENOMEM;
> + atomic_set(&cio->refcount, 0);
> + cio->rlist = rlist;
> +
> + max_copy_len = min3(max_copy_len, (sector_t)sq->limits.max_copy_sectors,
> + (sector_t)dq->limits.max_copy_sectors);
sq->limits.max_copy_sectors is already by definition smaller than
LONG_MAX, so there is no need for the min3 here.
> + max_copy_len = min3(max_copy_len, (sector_t)sq->limits.max_copy_range_sectors,
> + (sector_t)dq->limits.max_copy_range_sectors) << SECTOR_SHIFT;> +
> + for (ri = 0; ri < nr_srcs; ri++) {
> + cio->rlist[ri].comp_len = rlist[ri].len;
> + for (remaining = rlist[ri].len, src_blk = rlist[ri].src, dst_blk = rlist[ri].dst;
> + remaining > 0;
> + remaining -= copy_len, src_blk += copy_len, dst_blk += copy_len) {
This is unreadable.
> + copy_len = min(remaining, max_copy_len);
> +
> + token = alloc_page(gfp_mask);
> + if (unlikely(!token)) {
> + ret = -ENOMEM;
> + goto err_token;
> + }
> +
> + read_bio = bio_alloc(src_bdev, 1, REQ_OP_READ | REQ_COPY | REQ_NOMERGE,
> + gfp_mask);
> + if (!read_bio) {
> + ret = -ENOMEM;
> + goto err_read_bio;
> + }
> + read_bio->bi_iter.bi_sector = src_blk >> SECTOR_SHIFT;
> + read_bio->bi_iter.bi_size = copy_len;
> + __bio_add_page(read_bio, token, PAGE_SIZE, 0);
> + ret = submit_bio_wait(read_bio);
> + if (ret) {
> + bio_put(read_bio);
> + goto err_read_bio;
> + }
> + bio_put(read_bio);
> + ctx = kzalloc(sizeof(struct copy_ctx), gfp_mask);
> + if (!ctx) {
> + ret = -ENOMEM;
> + goto err_read_bio;
> + }
This should be done before the read.
> + ctx->cio = cio;
> + ctx->range_idx = ri;
> + ctx->start_sec = rlist[ri].src;
> +
> + write_bio = bio_alloc(dst_bdev, 1, REQ_OP_WRITE | REQ_COPY | REQ_NOMERGE,
> + gfp_mask);
> + if (!write_bio) {
> + ret = -ENOMEM;
> + goto err_read_bio;
> + }
> +
> + write_bio->bi_iter.bi_sector = dst_blk >> SECTOR_SHIFT;
> + write_bio->bi_iter.bi_size = copy_len;
> + __bio_add_page(write_bio, token, PAGE_SIZE, 0);
> + write_bio->bi_end_io = bio_copy_end_io;
> + write_bio->bi_private = ctx;
> + atomic_inc(&cio->refcount);
> + submit_bio(write_bio);
> + }
> + }
> +
> + /* Wait for completion of all IO's*/
> + return cio_await_completion(cio);
> +
> +err_read_bio:
> + __free_page(token);
> +err_token:
> + rlist[ri].comp_len = min_t(sector_t, rlist[ri].comp_len, (rlist[ri].len - remaining));
> +
> + cio->io_err = ret;
> + return cio_await_completion(cio);
> +}
> +
> +static inline int blk_copy_sanity_check(struct block_device *src_bdev,
> + struct block_device *dst_bdev, struct range_entry *rlist, int nr)
> +{
> + unsigned int align_mask = max(
> + bdev_logical_block_size(dst_bdev), bdev_logical_block_size(src_bdev)) - 1;
> + sector_t len = 0;
> + int i;
> +
> + for (i = 0; i < nr; i++) {
> + if (rlist[i].len)
> + len += rlist[i].len;
> + else
> + return -EINVAL;
> + if ((rlist[i].dst & align_mask) || (rlist[i].src & align_mask) ||
> + (rlist[i].len & align_mask))
> + return -EINVAL;
> + rlist[i].comp_len = 0;
> + }
> +
> + if (!len && len >= MAX_COPY_TOTAL_LENGTH)
> + return -EINVAL;
> +
> + return 0;
> +}
> +
> +static inline bool blk_check_copy_offload(struct request_queue *src_q,
> + struct request_queue *dest_q)
> +{
> + if (dest_q->limits.copy_offload == BLK_COPY_OFFLOAD &&
> + src_q->limits.copy_offload == BLK_COPY_OFFLOAD)
> + return true;
> +
> + return false;
> +}
> +
> +/*
> + * blkdev_issue_copy - queue a copy
> + * @src_bdev: source block device
> + * @nr_srcs: number of source ranges to copy
> + * @src_rlist: array of source ranges
> + * @dest_bdev: destination block device
> + * @gfp_mask: memory allocation flags (for bio_alloc)
> + * @flags: BLKDEV_COPY_* flags to control behaviour
> + *
> + * Description:
> + * Copy source ranges from source block device to destination block device.
> + * length of a source range cannot be zero.
> + */
> +int blkdev_issue_copy(struct block_device *src_bdev, int nr,
> + struct range_entry *rlist, struct block_device *dest_bdev,
> + gfp_t gfp_mask, int flags)
> +{
> + struct request_queue *src_q = bdev_get_queue(src_bdev);
> + struct request_queue *dest_q = bdev_get_queue(dest_bdev);
> + int ret = -EINVAL;
> +
> + if (!src_q || !dest_q)
> + return -ENXIO;
> +
> + if (!nr)
> + return -EINVAL;
> +
> + if (nr >= MAX_COPY_NR_RANGE)
> + return -EINVAL;
> +
> + if (bdev_read_only(dest_bdev))
> + return -EPERM;
> +
> + ret = blk_copy_sanity_check(src_bdev, dest_bdev, rlist, nr);
> + if (ret)
> + return ret;
> +
> + if (blk_check_copy_offload(src_q, dest_q))
> + ret = blk_copy_offload(src_bdev, nr, rlist, dest_bdev, gfp_mask);
> +
> + return ret;
> +}
> +EXPORT_SYMBOL(blkdev_issue_copy);
> +
> /**
> * __blkdev_issue_write_same - generate number of bios with same page
> * @bdev: target blockdev
> diff --git a/block/blk-settings.c b/block/blk-settings.c
> index 818454552cf8..4c8d48b8af25 100644
> --- a/block/blk-settings.c
> +++ b/block/blk-settings.c
> @@ -545,6 +545,8 @@ int blk_stack_limits(struct queue_limits *t, struct queue_limits *b,
> t->max_segment_size = min_not_zero(t->max_segment_size,
> b->max_segment_size);
>
> + t->max_copy_sectors = min_not_zero(t->max_copy_sectors, b->max_copy_sectors);
Why min_not_zero ? If one of the underlying drive does not support copy
offload, you cannot report that the top drive does.
> +
> t->misaligned |= b->misaligned;
>
> alignment = queue_limit_alignment_offset(b, start);
> diff --git a/block/blk.h b/block/blk.h
> index abb663a2a147..94d2b055750b 100644
> --- a/block/blk.h
> +++ b/block/blk.h
> @@ -292,6 +292,8 @@ static inline bool blk_may_split(struct request_queue *q, struct bio *bio)
> break;
> }
>
> + if (unlikely(op_is_copy(bio->bi_opf)))
> + return false;
> /*
> * All drivers must accept single-segments bios that are <= PAGE_SIZE.
> * This is a quick and dirty check that relies on the fact that
> diff --git a/include/linux/blk_types.h b/include/linux/blk_types.h
> index 5561e58d158a..0a3fee8ad61c 100644
> --- a/include/linux/blk_types.h
> +++ b/include/linux/blk_types.h
> @@ -418,6 +418,7 @@ enum req_flag_bits {
> /* for driver use */
> __REQ_DRV,
> __REQ_SWAP, /* swapping request. */
> + __REQ_COPY, /* copy request*/
> __REQ_NR_BITS, /* stops here */
> };
>
> @@ -442,6 +443,7 @@ enum req_flag_bits {
>
> #define REQ_DRV (1ULL << __REQ_DRV)
> #define REQ_SWAP (1ULL << __REQ_SWAP)
> +#define REQ_COPY (1ULL << __REQ_COPY)
>
> #define REQ_FAILFAST_MASK \
> (REQ_FAILFAST_DEV | REQ_FAILFAST_TRANSPORT | REQ_FAILFAST_DRIVER)
> @@ -498,6 +500,11 @@ static inline bool op_is_discard(unsigned int op)
> return (op & REQ_OP_MASK) == REQ_OP_DISCARD;
> }
>
> +static inline bool op_is_copy(unsigned int op)
> +{
> + return (op & REQ_COPY);
> +}
> +
> /*
> * Check if a bio or request operation is a zone management operation, with
> * the exception of REQ_OP_ZONE_RESET_ALL which is treated as a special case
> @@ -532,4 +539,17 @@ struct blk_rq_stat {
> u64 batch;
> };
>
> +struct cio {
> + atomic_t refcount;
> + blk_status_t io_err;
> + struct range_entry *rlist;
> + struct task_struct *waiter; /* waiting task (NULL if none) */
> +};
> +
> +struct copy_ctx {
> + int range_idx;
> + sector_t start_sec;
> + struct cio *cio;
> +};
> +
> #endif /* __LINUX_BLK_TYPES_H */
> diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h
> index f63ae50f1de3..15597488040c 100644
> --- a/include/linux/blkdev.h
> +++ b/include/linux/blkdev.h
> @@ -1120,6 +1120,9 @@ extern int __blkdev_issue_discard(struct block_device *bdev, sector_t sector,
> struct bio **biop);
> struct bio *bio_map_kern(struct request_queue *q, void *data, unsigned int len,
> gfp_t gfp_mask);
> +int blkdev_issue_copy(struct block_device *src_bdev, int nr_srcs,
> + struct range_entry *src_rlist, struct block_device *dest_bdev,
> + gfp_t gfp_mask, int flags);
>
> #define BLKDEV_ZERO_NOUNMAP (1 << 0) /* do not free blocks */
> #define BLKDEV_ZERO_NOFALLBACK (1 << 1) /* don't write explicit zeroes */
> diff --git a/include/uapi/linux/fs.h b/include/uapi/linux/fs.h
> index bdf7b404b3e7..55bca8f6e8ed 100644
> --- a/include/uapi/linux/fs.h
> +++ b/include/uapi/linux/fs.h
> @@ -64,6 +64,20 @@ struct fstrim_range {
> __u64 minlen;
> };
>
> +/* Maximum no of entries supported */
> +#define MAX_COPY_NR_RANGE (1 << 12)
> +
> +/* maximum total copy length */
> +#define MAX_COPY_TOTAL_LENGTH (1 << 21)
> +
> +/* Source range entry for copy */
> +struct range_entry {
> + __u64 src;
> + __u64 dst;
> + __u64 len;
> + __u64 comp_len;
> +};
> +
> /* extent-same (dedupe) ioctls; these MUST match the btrfs ioctl definitions */
> #define FILE_DEDUPE_RANGE_SAME 0
> #define FILE_DEDUPE_RANGE_DIFFERS 1
--
Damien Le Moal
Western Digital Research
^ permalink raw reply [flat|nested] 272+ messages in thread* Re: [dm-devel] [PATCH v2 03/10] block: Add copy offload support infrastructure
@ 2022-02-08 7:21 ` Damien Le Moal
0 siblings, 0 replies; 272+ messages in thread
From: Damien Le Moal @ 2022-02-08 7:21 UTC (permalink / raw)
To: Nitesh Shetty, mpatocka
Cc: djwong, linux-nvme, clm, dm-devel, osandov, javier, bvanassche,
linux-scsi, hch, roland, chaitanyak, SelvaKumar S, msnitzer,
josef, linux-block, dsterba, kbusch, Frederick.Knight, axboe,
tytso, joshi.k, martin.petersen, arnav.dawn, jack, linux-fsdevel
On 2/7/22 23:13, Nitesh Shetty wrote:
> Introduce blkdev_issue_copy which supports source and destination bdevs,
> and a array of (source, destination and copy length) tuples.
s/a/an
> Introduce REQ_COP copy offload operation flag. Create a read-write
REQ_COPY ?
> bio pair with a token as payload and submitted to the device in order.
> the read request populates token with source specific information which
> is then passed with write request.
> Ths design is courtsey Mikulas Patocka<mpatocka@>'s token based copy
s/Ths design is courtsey/This design is courtesy of
>
> Larger copy operation may be divided if necessary by looking at device
> limits.
may or will ?
by looking at -> depending on the ?
>
> Signed-off-by: Nitesh Shetty <nj.shetty@samsung.com>
> Signed-off-by: SelvaKumar S <selvakuma.s1@samsung.com>
> Signed-off-by: Arnav Dawn <arnav.dawn@samsung.com>
> ---
> block/blk-lib.c | 216 ++++++++++++++++++++++++++++++++++++++
> block/blk-settings.c | 2 +
> block/blk.h | 2 +
> include/linux/blk_types.h | 20 ++++
> include/linux/blkdev.h | 3 +
> include/uapi/linux/fs.h | 14 +++
> 6 files changed, 257 insertions(+)
>
> diff --git a/block/blk-lib.c b/block/blk-lib.c
> index 1b8ced45e4e5..3ae2c27b566e 100644
> --- a/block/blk-lib.c
> +++ b/block/blk-lib.c
> @@ -135,6 +135,222 @@ int blkdev_issue_discard(struct block_device *bdev, sector_t sector,
> }
> EXPORT_SYMBOL(blkdev_issue_discard);
>
> +/*
> + * Wait on and process all in-flight BIOs. This must only be called once
> + * all bios have been issued so that the refcount can only decrease.
> + * This just waits for all bios to make it through bio_copy_end_io. IO
> + * errors are propagated through cio->io_error.
> + */
> +static int cio_await_completion(struct cio *cio)
> +{
> + int ret = 0;
> +
> + while (atomic_read(&cio->refcount)) {
> + cio->waiter = current;
> + __set_current_state(TASK_UNINTERRUPTIBLE);
> + blk_io_schedule();
> + /* wake up sets us TASK_RUNNING */
> + cio->waiter = NULL;
> + ret = cio->io_err;
Why is this in the loop ?
> + }
> + kvfree(cio);
> +
> + return ret;
> +}
> +
> +static void bio_copy_end_io(struct bio *bio)
> +{
> + struct copy_ctx *ctx = bio->bi_private;
> + struct cio *cio = ctx->cio;
> + sector_t clen;
> + int ri = ctx->range_idx;
> +
> + if (bio->bi_status) {
> + cio->io_err = bio->bi_status;
> + clen = (bio->bi_iter.bi_sector - ctx->start_sec) << SECTOR_SHIFT;
> + cio->rlist[ri].comp_len = min_t(sector_t, clen, cio->rlist[ri].comp_len);
> + }
> + __free_page(bio->bi_io_vec[0].bv_page);
> + kfree(ctx);
> + bio_put(bio);
> +
> + if (atomic_dec_and_test(&cio->refcount) && cio->waiter)
> + wake_up_process(cio->waiter);
This looks racy: the cio->waiter test and wakeup are not atomic.
> +}
> +
> +/*
> + * blk_copy_offload - Use device's native copy offload feature
> + * Go through user provide payload, prepare new payload based on device's copy offload limits.
> + */
> +int blk_copy_offload(struct block_device *src_bdev, int nr_srcs,
> + struct range_entry *rlist, struct block_device *dst_bdev, gfp_t gfp_mask)
> +{
> + struct request_queue *sq = bdev_get_queue(src_bdev);
> + struct request_queue *dq = bdev_get_queue(dst_bdev);
> + struct bio *read_bio, *write_bio;
> + struct copy_ctx *ctx;
> + struct cio *cio;
> + struct page *token;
> + sector_t src_blk, copy_len, dst_blk;
> + sector_t remaining, max_copy_len = LONG_MAX;
> + int ri = 0, ret = 0;
> +
> + cio = kzalloc(sizeof(struct cio), GFP_KERNEL);
> + if (!cio)
> + return -ENOMEM;
> + atomic_set(&cio->refcount, 0);
> + cio->rlist = rlist;
> +
> + max_copy_len = min3(max_copy_len, (sector_t)sq->limits.max_copy_sectors,
> + (sector_t)dq->limits.max_copy_sectors);
sq->limits.max_copy_sectors is already by definition smaller than
LONG_MAX, so there is no need for the min3 here.
> + max_copy_len = min3(max_copy_len, (sector_t)sq->limits.max_copy_range_sectors,
> + (sector_t)dq->limits.max_copy_range_sectors) << SECTOR_SHIFT;> +
> + for (ri = 0; ri < nr_srcs; ri++) {
> + cio->rlist[ri].comp_len = rlist[ri].len;
> + for (remaining = rlist[ri].len, src_blk = rlist[ri].src, dst_blk = rlist[ri].dst;
> + remaining > 0;
> + remaining -= copy_len, src_blk += copy_len, dst_blk += copy_len) {
This is unreadable.
> + copy_len = min(remaining, max_copy_len);
> +
> + token = alloc_page(gfp_mask);
> + if (unlikely(!token)) {
> + ret = -ENOMEM;
> + goto err_token;
> + }
> +
> + read_bio = bio_alloc(src_bdev, 1, REQ_OP_READ | REQ_COPY | REQ_NOMERGE,
> + gfp_mask);
> + if (!read_bio) {
> + ret = -ENOMEM;
> + goto err_read_bio;
> + }
> + read_bio->bi_iter.bi_sector = src_blk >> SECTOR_SHIFT;
> + read_bio->bi_iter.bi_size = copy_len;
> + __bio_add_page(read_bio, token, PAGE_SIZE, 0);
> + ret = submit_bio_wait(read_bio);
> + if (ret) {
> + bio_put(read_bio);
> + goto err_read_bio;
> + }
> + bio_put(read_bio);
> + ctx = kzalloc(sizeof(struct copy_ctx), gfp_mask);
> + if (!ctx) {
> + ret = -ENOMEM;
> + goto err_read_bio;
> + }
This should be done before the read.
> + ctx->cio = cio;
> + ctx->range_idx = ri;
> + ctx->start_sec = rlist[ri].src;
> +
> + write_bio = bio_alloc(dst_bdev, 1, REQ_OP_WRITE | REQ_COPY | REQ_NOMERGE,
> + gfp_mask);
> + if (!write_bio) {
> + ret = -ENOMEM;
> + goto err_read_bio;
> + }
> +
> + write_bio->bi_iter.bi_sector = dst_blk >> SECTOR_SHIFT;
> + write_bio->bi_iter.bi_size = copy_len;
> + __bio_add_page(write_bio, token, PAGE_SIZE, 0);
> + write_bio->bi_end_io = bio_copy_end_io;
> + write_bio->bi_private = ctx;
> + atomic_inc(&cio->refcount);
> + submit_bio(write_bio);
> + }
> + }
> +
> + /* Wait for completion of all IO's*/
> + return cio_await_completion(cio);
> +
> +err_read_bio:
> + __free_page(token);
> +err_token:
> + rlist[ri].comp_len = min_t(sector_t, rlist[ri].comp_len, (rlist[ri].len - remaining));
> +
> + cio->io_err = ret;
> + return cio_await_completion(cio);
> +}
> +
> +static inline int blk_copy_sanity_check(struct block_device *src_bdev,
> + struct block_device *dst_bdev, struct range_entry *rlist, int nr)
> +{
> + unsigned int align_mask = max(
> + bdev_logical_block_size(dst_bdev), bdev_logical_block_size(src_bdev)) - 1;
> + sector_t len = 0;
> + int i;
> +
> + for (i = 0; i < nr; i++) {
> + if (rlist[i].len)
> + len += rlist[i].len;
> + else
> + return -EINVAL;
> + if ((rlist[i].dst & align_mask) || (rlist[i].src & align_mask) ||
> + (rlist[i].len & align_mask))
> + return -EINVAL;
> + rlist[i].comp_len = 0;
> + }
> +
> + if (!len && len >= MAX_COPY_TOTAL_LENGTH)
> + return -EINVAL;
> +
> + return 0;
> +}
> +
> +static inline bool blk_check_copy_offload(struct request_queue *src_q,
> + struct request_queue *dest_q)
> +{
> + if (dest_q->limits.copy_offload == BLK_COPY_OFFLOAD &&
> + src_q->limits.copy_offload == BLK_COPY_OFFLOAD)
> + return true;
> +
> + return false;
> +}
> +
> +/*
> + * blkdev_issue_copy - queue a copy
> + * @src_bdev: source block device
> + * @nr_srcs: number of source ranges to copy
> + * @src_rlist: array of source ranges
> + * @dest_bdev: destination block device
> + * @gfp_mask: memory allocation flags (for bio_alloc)
> + * @flags: BLKDEV_COPY_* flags to control behaviour
> + *
> + * Description:
> + * Copy source ranges from source block device to destination block device.
> + * length of a source range cannot be zero.
> + */
> +int blkdev_issue_copy(struct block_device *src_bdev, int nr,
> + struct range_entry *rlist, struct block_device *dest_bdev,
> + gfp_t gfp_mask, int flags)
> +{
> + struct request_queue *src_q = bdev_get_queue(src_bdev);
> + struct request_queue *dest_q = bdev_get_queue(dest_bdev);
> + int ret = -EINVAL;
> +
> + if (!src_q || !dest_q)
> + return -ENXIO;
> +
> + if (!nr)
> + return -EINVAL;
> +
> + if (nr >= MAX_COPY_NR_RANGE)
> + return -EINVAL;
> +
> + if (bdev_read_only(dest_bdev))
> + return -EPERM;
> +
> + ret = blk_copy_sanity_check(src_bdev, dest_bdev, rlist, nr);
> + if (ret)
> + return ret;
> +
> + if (blk_check_copy_offload(src_q, dest_q))
> + ret = blk_copy_offload(src_bdev, nr, rlist, dest_bdev, gfp_mask);
> +
> + return ret;
> +}
> +EXPORT_SYMBOL(blkdev_issue_copy);
> +
> /**
> * __blkdev_issue_write_same - generate number of bios with same page
> * @bdev: target blockdev
> diff --git a/block/blk-settings.c b/block/blk-settings.c
> index 818454552cf8..4c8d48b8af25 100644
> --- a/block/blk-settings.c
> +++ b/block/blk-settings.c
> @@ -545,6 +545,8 @@ int blk_stack_limits(struct queue_limits *t, struct queue_limits *b,
> t->max_segment_size = min_not_zero(t->max_segment_size,
> b->max_segment_size);
>
> + t->max_copy_sectors = min_not_zero(t->max_copy_sectors, b->max_copy_sectors);
Why min_not_zero ? If one of the underlying drive does not support copy
offload, you cannot report that the top drive does.
> +
> t->misaligned |= b->misaligned;
>
> alignment = queue_limit_alignment_offset(b, start);
> diff --git a/block/blk.h b/block/blk.h
> index abb663a2a147..94d2b055750b 100644
> --- a/block/blk.h
> +++ b/block/blk.h
> @@ -292,6 +292,8 @@ static inline bool blk_may_split(struct request_queue *q, struct bio *bio)
> break;
> }
>
> + if (unlikely(op_is_copy(bio->bi_opf)))
> + return false;
> /*
> * All drivers must accept single-segments bios that are <= PAGE_SIZE.
> * This is a quick and dirty check that relies on the fact that
> diff --git a/include/linux/blk_types.h b/include/linux/blk_types.h
> index 5561e58d158a..0a3fee8ad61c 100644
> --- a/include/linux/blk_types.h
> +++ b/include/linux/blk_types.h
> @@ -418,6 +418,7 @@ enum req_flag_bits {
> /* for driver use */
> __REQ_DRV,
> __REQ_SWAP, /* swapping request. */
> + __REQ_COPY, /* copy request*/
> __REQ_NR_BITS, /* stops here */
> };
>
> @@ -442,6 +443,7 @@ enum req_flag_bits {
>
> #define REQ_DRV (1ULL << __REQ_DRV)
> #define REQ_SWAP (1ULL << __REQ_SWAP)
> +#define REQ_COPY (1ULL << __REQ_COPY)
>
> #define REQ_FAILFAST_MASK \
> (REQ_FAILFAST_DEV | REQ_FAILFAST_TRANSPORT | REQ_FAILFAST_DRIVER)
> @@ -498,6 +500,11 @@ static inline bool op_is_discard(unsigned int op)
> return (op & REQ_OP_MASK) == REQ_OP_DISCARD;
> }
>
> +static inline bool op_is_copy(unsigned int op)
> +{
> + return (op & REQ_COPY);
> +}
> +
> /*
> * Check if a bio or request operation is a zone management operation, with
> * the exception of REQ_OP_ZONE_RESET_ALL which is treated as a special case
> @@ -532,4 +539,17 @@ struct blk_rq_stat {
> u64 batch;
> };
>
> +struct cio {
> + atomic_t refcount;
> + blk_status_t io_err;
> + struct range_entry *rlist;
> + struct task_struct *waiter; /* waiting task (NULL if none) */
> +};
> +
> +struct copy_ctx {
> + int range_idx;
> + sector_t start_sec;
> + struct cio *cio;
> +};
> +
> #endif /* __LINUX_BLK_TYPES_H */
> diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h
> index f63ae50f1de3..15597488040c 100644
> --- a/include/linux/blkdev.h
> +++ b/include/linux/blkdev.h
> @@ -1120,6 +1120,9 @@ extern int __blkdev_issue_discard(struct block_device *bdev, sector_t sector,
> struct bio **biop);
> struct bio *bio_map_kern(struct request_queue *q, void *data, unsigned int len,
> gfp_t gfp_mask);
> +int blkdev_issue_copy(struct block_device *src_bdev, int nr_srcs,
> + struct range_entry *src_rlist, struct block_device *dest_bdev,
> + gfp_t gfp_mask, int flags);
>
> #define BLKDEV_ZERO_NOUNMAP (1 << 0) /* do not free blocks */
> #define BLKDEV_ZERO_NOFALLBACK (1 << 1) /* don't write explicit zeroes */
> diff --git a/include/uapi/linux/fs.h b/include/uapi/linux/fs.h
> index bdf7b404b3e7..55bca8f6e8ed 100644
> --- a/include/uapi/linux/fs.h
> +++ b/include/uapi/linux/fs.h
> @@ -64,6 +64,20 @@ struct fstrim_range {
> __u64 minlen;
> };
>
> +/* Maximum no of entries supported */
> +#define MAX_COPY_NR_RANGE (1 << 12)
> +
> +/* maximum total copy length */
> +#define MAX_COPY_TOTAL_LENGTH (1 << 21)
> +
> +/* Source range entry for copy */
> +struct range_entry {
> + __u64 src;
> + __u64 dst;
> + __u64 len;
> + __u64 comp_len;
> +};
> +
> /* extent-same (dedupe) ioctls; these MUST match the btrfs ioctl definitions */
> #define FILE_DEDUPE_RANGE_SAME 0
> #define FILE_DEDUPE_RANGE_DIFFERS 1
--
Damien Le Moal
Western Digital Research
--
dm-devel mailing list
dm-devel@redhat.com
https://listman.redhat.com/mailman/listinfo/dm-devel
^ permalink raw reply [flat|nested] 272+ messages in thread* Re: [PATCH v2 03/10] block: Add copy offload support infrastructure
2022-02-08 7:21 ` [dm-devel] " Damien Le Moal
@ 2022-02-09 10:22 ` Nitesh Shetty
-1 siblings, 0 replies; 272+ messages in thread
From: Nitesh Shetty @ 2022-02-09 10:22 UTC (permalink / raw)
To: Damien Le Moal
Cc: mpatocka, javier, chaitanyak, linux-block, linux-scsi, dm-devel,
linux-nvme, linux-fsdevel, axboe, msnitzer, bvanassche,
martin.petersen, hare, kbusch, hch, Frederick.Knight, osandov,
djwong, josef, clm, dsterba, tytso, jack, joshi.k, arnav.dawn,
SelvaKumar S
[-- Attachment #1: Type: text/plain, Size: 13602 bytes --]
O Tue, Feb 08, 2022 at 04:21:19PM +0900, Damien Le Moal wrote:
> On 2/7/22 23:13, Nitesh Shetty wrote:
> > Introduce blkdev_issue_copy which supports source and destination bdevs,
> > and a array of (source, destination and copy length) tuples.
>
> s/a/an
>
acked
> > Introduce REQ_COP copy offload operation flag. Create a read-write
>
> REQ_COPY ?
>
acked
> > bio pair with a token as payload and submitted to the device in order.
> > the read request populates token with source specific information which
> > is then passed with write request.
> > Ths design is courtsey Mikulas Patocka<mpatocka@>'s token based copy
>
> s/Ths design is courtsey/This design is courtesy of
>
acked
> >
> > Larger copy operation may be divided if necessary by looking at device
> > limits.
>
> may or will ?
> by looking at -> depending on the ?
>
Larger copy will be divided, based on max_copy_sectors,max_copy_range_sector
limits. Will add in next series.
> >
> > Signed-off-by: Nitesh Shetty <nj.shetty@samsung.com>
> > Signed-off-by: SelvaKumar S <selvakuma.s1@samsung.com>
> > Signed-off-by: Arnav Dawn <arnav.dawn@samsung.com>
> > ---
> > block/blk-lib.c | 216 ++++++++++++++++++++++++++++++++++++++
> > block/blk-settings.c | 2 +
> > block/blk.h | 2 +
> > include/linux/blk_types.h | 20 ++++
> > include/linux/blkdev.h | 3 +
> > include/uapi/linux/fs.h | 14 +++
> > 6 files changed, 257 insertions(+)
> >
> > diff --git a/block/blk-lib.c b/block/blk-lib.c
> > index 1b8ced45e4e5..3ae2c27b566e 100644
> > --- a/block/blk-lib.c
> > +++ b/block/blk-lib.c
> > @@ -135,6 +135,222 @@ int blkdev_issue_discard(struct block_device *bdev, sector_t sector,
> > }
> > EXPORT_SYMBOL(blkdev_issue_discard);
> >
> > +/*
> > + * Wait on and process all in-flight BIOs. This must only be called once
> > + * all bios have been issued so that the refcount can only decrease.
> > + * This just waits for all bios to make it through bio_copy_end_io. IO
> > + * errors are propagated through cio->io_error.
> > + */
> > +static int cio_await_completion(struct cio *cio)
> > +{
> > + int ret = 0;
> > +
> > + while (atomic_read(&cio->refcount)) {
> > + cio->waiter = current;
> > + __set_current_state(TASK_UNINTERRUPTIBLE);
> > + blk_io_schedule();
> > + /* wake up sets us TASK_RUNNING */
> > + cio->waiter = NULL;
> > + ret = cio->io_err;
>
> Why is this in the loop ?
>
agree.
> > + }
> > + kvfree(cio);
> > +
> > + return ret;
> > +}
> > +
> > +static void bio_copy_end_io(struct bio *bio)
> > +{
> > + struct copy_ctx *ctx = bio->bi_private;
> > + struct cio *cio = ctx->cio;
> > + sector_t clen;
> > + int ri = ctx->range_idx;
> > +
> > + if (bio->bi_status) {
> > + cio->io_err = bio->bi_status;
> > + clen = (bio->bi_iter.bi_sector - ctx->start_sec) << SECTOR_SHIFT;
> > + cio->rlist[ri].comp_len = min_t(sector_t, clen, cio->rlist[ri].comp_len);
> > + }
> > + __free_page(bio->bi_io_vec[0].bv_page);
> > + kfree(ctx);
> > + bio_put(bio);
> > +
> > + if (atomic_dec_and_test(&cio->refcount) && cio->waiter)
> > + wake_up_process(cio->waiter);
>
> This looks racy: the cio->waiter test and wakeup are not atomic.
agreed, will remove atomic for refcount and add if check and wakeup in locks
in next version.
> > +}
> > +
> > +/*
> > + * blk_copy_offload - Use device's native copy offload feature
> > + * Go through user provide payload, prepare new payload based on device's copy offload limits.
> > + */
> > +int blk_copy_offload(struct block_device *src_bdev, int nr_srcs,
> > + struct range_entry *rlist, struct block_device *dst_bdev, gfp_t gfp_mask)
> > +{
> > + struct request_queue *sq = bdev_get_queue(src_bdev);
> > + struct request_queue *dq = bdev_get_queue(dst_bdev);
> > + struct bio *read_bio, *write_bio;
> > + struct copy_ctx *ctx;
> > + struct cio *cio;
> > + struct page *token;
> > + sector_t src_blk, copy_len, dst_blk;
> > + sector_t remaining, max_copy_len = LONG_MAX;
> > + int ri = 0, ret = 0;
> > +
> > + cio = kzalloc(sizeof(struct cio), GFP_KERNEL);
> > + if (!cio)
> > + return -ENOMEM;
> > + atomic_set(&cio->refcount, 0);
> > + cio->rlist = rlist;
> > +
> > + max_copy_len = min3(max_copy_len, (sector_t)sq->limits.max_copy_sectors,
> > + (sector_t)dq->limits.max_copy_sectors);
>
> sq->limits.max_copy_sectors is already by definition smaller than
> LONG_MAX, so there is no need for the min3 here.
>
acked
> > + max_copy_len = min3(max_copy_len, (sector_t)sq->limits.max_copy_range_sectors,
> > + (sector_t)dq->limits.max_copy_range_sectors) << SECTOR_SHIFT;> +
> > + for (ri = 0; ri < nr_srcs; ri++) {
> > + cio->rlist[ri].comp_len = rlist[ri].len;
> > + for (remaining = rlist[ri].len, src_blk = rlist[ri].src, dst_blk = rlist[ri].dst;
> > + remaining > 0;
> > + remaining -= copy_len, src_blk += copy_len, dst_blk += copy_len) {
>
> This is unreadable.
>
Sure, I will simplify the loops in next version.
> > + copy_len = min(remaining, max_copy_len);
> > +
> > + token = alloc_page(gfp_mask);
> > + if (unlikely(!token)) {
> > + ret = -ENOMEM;
> > + goto err_token;
> > + }
> > +
> > + read_bio = bio_alloc(src_bdev, 1, REQ_OP_READ | REQ_COPY | REQ_NOMERGE,
> > + gfp_mask);
> > + if (!read_bio) {
> > + ret = -ENOMEM;
> > + goto err_read_bio;
> > + }
> > + read_bio->bi_iter.bi_sector = src_blk >> SECTOR_SHIFT;
> > + read_bio->bi_iter.bi_size = copy_len;
> > + __bio_add_page(read_bio, token, PAGE_SIZE, 0);
> > + ret = submit_bio_wait(read_bio);
> > + if (ret) {
> > + bio_put(read_bio);
> > + goto err_read_bio;
> > + }
> > + bio_put(read_bio);
> > + ctx = kzalloc(sizeof(struct copy_ctx), gfp_mask);
> > + if (!ctx) {
> > + ret = -ENOMEM;
> > + goto err_read_bio;
> > + }
>
> This should be done before the read.
>
acked.
> > + ctx->cio = cio;
> > + ctx->range_idx = ri;
> > + ctx->start_sec = rlist[ri].src;
> > +
> > + write_bio = bio_alloc(dst_bdev, 1, REQ_OP_WRITE | REQ_COPY | REQ_NOMERGE,
> > + gfp_mask);
> > + if (!write_bio) {
> > + ret = -ENOMEM;
> > + goto err_read_bio;
> > + }
> > +
> > + write_bio->bi_iter.bi_sector = dst_blk >> SECTOR_SHIFT;
> > + write_bio->bi_iter.bi_size = copy_len;
> > + __bio_add_page(write_bio, token, PAGE_SIZE, 0);
> > + write_bio->bi_end_io = bio_copy_end_io;
> > + write_bio->bi_private = ctx;
> > + atomic_inc(&cio->refcount);
> > + submit_bio(write_bio);
> > + }
> > + }
> > +
> > + /* Wait for completion of all IO's*/
> > + return cio_await_completion(cio);
> > +
> > +err_read_bio:
> > + __free_page(token);
> > +err_token:
> > + rlist[ri].comp_len = min_t(sector_t, rlist[ri].comp_len, (rlist[ri].len - remaining));
> > +
> > + cio->io_err = ret;
> > + return cio_await_completion(cio);
> > +}
> > +
> > +static inline int blk_copy_sanity_check(struct block_device *src_bdev,
> > + struct block_device *dst_bdev, struct range_entry *rlist, int nr)
> > +{
> > + unsigned int align_mask = max(
> > + bdev_logical_block_size(dst_bdev), bdev_logical_block_size(src_bdev)) - 1;
> > + sector_t len = 0;
> > + int i;
> > +
> > + for (i = 0; i < nr; i++) {
> > + if (rlist[i].len)
> > + len += rlist[i].len;
> > + else
> > + return -EINVAL;
> > + if ((rlist[i].dst & align_mask) || (rlist[i].src & align_mask) ||
> > + (rlist[i].len & align_mask))
> > + return -EINVAL;
> > + rlist[i].comp_len = 0;
> > + }
> > +
> > + if (!len && len >= MAX_COPY_TOTAL_LENGTH)
> > + return -EINVAL;
> > +
> > + return 0;
> > +}
> > +
> > +static inline bool blk_check_copy_offload(struct request_queue *src_q,
> > + struct request_queue *dest_q)
> > +{
> > + if (dest_q->limits.copy_offload == BLK_COPY_OFFLOAD &&
> > + src_q->limits.copy_offload == BLK_COPY_OFFLOAD)
> > + return true;
> > +
> > + return false;
> > +}
> > +
> > +/*
> > + * blkdev_issue_copy - queue a copy
> > + * @src_bdev: source block device
> > + * @nr_srcs: number of source ranges to copy
> > + * @src_rlist: array of source ranges
> > + * @dest_bdev: destination block device
> > + * @gfp_mask: memory allocation flags (for bio_alloc)
> > + * @flags: BLKDEV_COPY_* flags to control behaviour
> > + *
> > + * Description:
> > + * Copy source ranges from source block device to destination block device.
> > + * length of a source range cannot be zero.
> > + */
> > +int blkdev_issue_copy(struct block_device *src_bdev, int nr,
> > + struct range_entry *rlist, struct block_device *dest_bdev,
> > + gfp_t gfp_mask, int flags)
> > +{
> > + struct request_queue *src_q = bdev_get_queue(src_bdev);
> > + struct request_queue *dest_q = bdev_get_queue(dest_bdev);
> > + int ret = -EINVAL;
> > +
> > + if (!src_q || !dest_q)
> > + return -ENXIO;
> > +
> > + if (!nr)
> > + return -EINVAL;
> > +
> > + if (nr >= MAX_COPY_NR_RANGE)
> > + return -EINVAL;
> > +
> > + if (bdev_read_only(dest_bdev))
> > + return -EPERM;
> > +
> > + ret = blk_copy_sanity_check(src_bdev, dest_bdev, rlist, nr);
> > + if (ret)
> > + return ret;
> > +
> > + if (blk_check_copy_offload(src_q, dest_q))
> > + ret = blk_copy_offload(src_bdev, nr, rlist, dest_bdev, gfp_mask);
> > +
> > + return ret;
> > +}
> > +EXPORT_SYMBOL(blkdev_issue_copy);
> > +
> > /**
> > * __blkdev_issue_write_same - generate number of bios with same page
> > * @bdev: target blockdev
> > diff --git a/block/blk-settings.c b/block/blk-settings.c
> > index 818454552cf8..4c8d48b8af25 100644
> > --- a/block/blk-settings.c
> > +++ b/block/blk-settings.c
> > @@ -545,6 +545,8 @@ int blk_stack_limits(struct queue_limits *t, struct queue_limits *b,
> > t->max_segment_size = min_not_zero(t->max_segment_size,
> > b->max_segment_size);
> >
> > + t->max_copy_sectors = min_not_zero(t->max_copy_sectors, b->max_copy_sectors);
>
> Why min_not_zero ? If one of the underlying drive does not support copy
> offload, you cannot report that the top drive does.
>
agreed. Will update in next series.
> > +
> > t->misaligned |= b->misaligned;
> >
> > alignment = queue_limit_alignment_offset(b, start);
> > diff --git a/block/blk.h b/block/blk.h
> > index abb663a2a147..94d2b055750b 100644
> > --- a/block/blk.h
> > +++ b/block/blk.h
> > @@ -292,6 +292,8 @@ static inline bool blk_may_split(struct request_queue *q, struct bio *bio)
> > break;
> > }
> >
> > + if (unlikely(op_is_copy(bio->bi_opf)))
> > + return false;
> > /*
> > * All drivers must accept single-segments bios that are <= PAGE_SIZE.
> > * This is a quick and dirty check that relies on the fact that
> > diff --git a/include/linux/blk_types.h b/include/linux/blk_types.h
> > index 5561e58d158a..0a3fee8ad61c 100644
> > --- a/include/linux/blk_types.h
> > +++ b/include/linux/blk_types.h
> > @@ -418,6 +418,7 @@ enum req_flag_bits {
> > /* for driver use */
> > __REQ_DRV,
> > __REQ_SWAP, /* swapping request. */
> > + __REQ_COPY, /* copy request*/
> > __REQ_NR_BITS, /* stops here */
> > };
> >
> > @@ -442,6 +443,7 @@ enum req_flag_bits {
> >
> > #define REQ_DRV (1ULL << __REQ_DRV)
> > #define REQ_SWAP (1ULL << __REQ_SWAP)
> > +#define REQ_COPY (1ULL << __REQ_COPY)
> >
> > #define REQ_FAILFAST_MASK \
> > (REQ_FAILFAST_DEV | REQ_FAILFAST_TRANSPORT | REQ_FAILFAST_DRIVER)
> > @@ -498,6 +500,11 @@ static inline bool op_is_discard(unsigned int op)
> > return (op & REQ_OP_MASK) == REQ_OP_DISCARD;
> > }
> >
> > +static inline bool op_is_copy(unsigned int op)
> > +{
> > + return (op & REQ_COPY);
> > +}
> > +
> > /*
> > * Check if a bio or request operation is a zone management operation, with
> > * the exception of REQ_OP_ZONE_RESET_ALL which is treated as a special case
> > @@ -532,4 +539,17 @@ struct blk_rq_stat {
> > u64 batch;
> > };
> >
> > +struct cio {
> > + atomic_t refcount;
> > + blk_status_t io_err;
> > + struct range_entry *rlist;
> > + struct task_struct *waiter; /* waiting task (NULL if none) */
> > +};
> > +
> > +struct copy_ctx {
> > + int range_idx;
> > + sector_t start_sec;
> > + struct cio *cio;
> > +};
> > +
> > #endif /* __LINUX_BLK_TYPES_H */
> > diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h
> > index f63ae50f1de3..15597488040c 100644
> > --- a/include/linux/blkdev.h
> > +++ b/include/linux/blkdev.h
> > @@ -1120,6 +1120,9 @@ extern int __blkdev_issue_discard(struct block_device *bdev, sector_t sector,
> > struct bio **biop);
> > struct bio *bio_map_kern(struct request_queue *q, void *data, unsigned int len,
> > gfp_t gfp_mask);
> > +int blkdev_issue_copy(struct block_device *src_bdev, int nr_srcs,
> > + struct range_entry *src_rlist, struct block_device *dest_bdev,
> > + gfp_t gfp_mask, int flags);
> >
> > #define BLKDEV_ZERO_NOUNMAP (1 << 0) /* do not free blocks */
> > #define BLKDEV_ZERO_NOFALLBACK (1 << 1) /* don't write explicit zeroes */
> > diff --git a/include/uapi/linux/fs.h b/include/uapi/linux/fs.h
> > index bdf7b404b3e7..55bca8f6e8ed 100644
> > --- a/include/uapi/linux/fs.h
> > +++ b/include/uapi/linux/fs.h
> > @@ -64,6 +64,20 @@ struct fstrim_range {
> > __u64 minlen;
> > };
> >
> > +/* Maximum no of entries supported */
> > +#define MAX_COPY_NR_RANGE (1 << 12)
> > +
> > +/* maximum total copy length */
> > +#define MAX_COPY_TOTAL_LENGTH (1 << 21)
> > +
> > +/* Source range entry for copy */
> > +struct range_entry {
> > + __u64 src;
> > + __u64 dst;
> > + __u64 len;
> > + __u64 comp_len;
> > +};
> > +
> > /* extent-same (dedupe) ioctls; these MUST match the btrfs ioctl definitions */
> > #define FILE_DEDUPE_RANGE_SAME 0
> > #define FILE_DEDUPE_RANGE_DIFFERS 1
>
>
> --
> Damien Le Moal
> Western Digital Research
>
--
Thank you
Nitesh
[-- Attachment #2: Type: text/plain, Size: 0 bytes --]
^ permalink raw reply [flat|nested] 272+ messages in thread* Re: [dm-devel] [PATCH v2 03/10] block: Add copy offload support infrastructure
@ 2022-02-09 10:22 ` Nitesh Shetty
0 siblings, 0 replies; 272+ messages in thread
From: Nitesh Shetty @ 2022-02-09 10:22 UTC (permalink / raw)
To: Damien Le Moal
Cc: djwong, linux-nvme, clm, dm-devel, osandov, javier, bvanassche,
linux-scsi, hch, chaitanyak, SelvaKumar S, msnitzer, josef,
linux-block, mpatocka, dsterba, Frederick.Knight, axboe, tytso,
joshi.k, martin.petersen, arnav.dawn, kbusch, jack,
linux-fsdevel
[-- Attachment #1: Type: text/plain, Size: 13602 bytes --]
O Tue, Feb 08, 2022 at 04:21:19PM +0900, Damien Le Moal wrote:
> On 2/7/22 23:13, Nitesh Shetty wrote:
> > Introduce blkdev_issue_copy which supports source and destination bdevs,
> > and a array of (source, destination and copy length) tuples.
>
> s/a/an
>
acked
> > Introduce REQ_COP copy offload operation flag. Create a read-write
>
> REQ_COPY ?
>
acked
> > bio pair with a token as payload and submitted to the device in order.
> > the read request populates token with source specific information which
> > is then passed with write request.
> > Ths design is courtsey Mikulas Patocka<mpatocka@>'s token based copy
>
> s/Ths design is courtsey/This design is courtesy of
>
acked
> >
> > Larger copy operation may be divided if necessary by looking at device
> > limits.
>
> may or will ?
> by looking at -> depending on the ?
>
Larger copy will be divided, based on max_copy_sectors,max_copy_range_sector
limits. Will add in next series.
> >
> > Signed-off-by: Nitesh Shetty <nj.shetty@samsung.com>
> > Signed-off-by: SelvaKumar S <selvakuma.s1@samsung.com>
> > Signed-off-by: Arnav Dawn <arnav.dawn@samsung.com>
> > ---
> > block/blk-lib.c | 216 ++++++++++++++++++++++++++++++++++++++
> > block/blk-settings.c | 2 +
> > block/blk.h | 2 +
> > include/linux/blk_types.h | 20 ++++
> > include/linux/blkdev.h | 3 +
> > include/uapi/linux/fs.h | 14 +++
> > 6 files changed, 257 insertions(+)
> >
> > diff --git a/block/blk-lib.c b/block/blk-lib.c
> > index 1b8ced45e4e5..3ae2c27b566e 100644
> > --- a/block/blk-lib.c
> > +++ b/block/blk-lib.c
> > @@ -135,6 +135,222 @@ int blkdev_issue_discard(struct block_device *bdev, sector_t sector,
> > }
> > EXPORT_SYMBOL(blkdev_issue_discard);
> >
> > +/*
> > + * Wait on and process all in-flight BIOs. This must only be called once
> > + * all bios have been issued so that the refcount can only decrease.
> > + * This just waits for all bios to make it through bio_copy_end_io. IO
> > + * errors are propagated through cio->io_error.
> > + */
> > +static int cio_await_completion(struct cio *cio)
> > +{
> > + int ret = 0;
> > +
> > + while (atomic_read(&cio->refcount)) {
> > + cio->waiter = current;
> > + __set_current_state(TASK_UNINTERRUPTIBLE);
> > + blk_io_schedule();
> > + /* wake up sets us TASK_RUNNING */
> > + cio->waiter = NULL;
> > + ret = cio->io_err;
>
> Why is this in the loop ?
>
agree.
> > + }
> > + kvfree(cio);
> > +
> > + return ret;
> > +}
> > +
> > +static void bio_copy_end_io(struct bio *bio)
> > +{
> > + struct copy_ctx *ctx = bio->bi_private;
> > + struct cio *cio = ctx->cio;
> > + sector_t clen;
> > + int ri = ctx->range_idx;
> > +
> > + if (bio->bi_status) {
> > + cio->io_err = bio->bi_status;
> > + clen = (bio->bi_iter.bi_sector - ctx->start_sec) << SECTOR_SHIFT;
> > + cio->rlist[ri].comp_len = min_t(sector_t, clen, cio->rlist[ri].comp_len);
> > + }
> > + __free_page(bio->bi_io_vec[0].bv_page);
> > + kfree(ctx);
> > + bio_put(bio);
> > +
> > + if (atomic_dec_and_test(&cio->refcount) && cio->waiter)
> > + wake_up_process(cio->waiter);
>
> This looks racy: the cio->waiter test and wakeup are not atomic.
agreed, will remove atomic for refcount and add if check and wakeup in locks
in next version.
> > +}
> > +
> > +/*
> > + * blk_copy_offload - Use device's native copy offload feature
> > + * Go through user provide payload, prepare new payload based on device's copy offload limits.
> > + */
> > +int blk_copy_offload(struct block_device *src_bdev, int nr_srcs,
> > + struct range_entry *rlist, struct block_device *dst_bdev, gfp_t gfp_mask)
> > +{
> > + struct request_queue *sq = bdev_get_queue(src_bdev);
> > + struct request_queue *dq = bdev_get_queue(dst_bdev);
> > + struct bio *read_bio, *write_bio;
> > + struct copy_ctx *ctx;
> > + struct cio *cio;
> > + struct page *token;
> > + sector_t src_blk, copy_len, dst_blk;
> > + sector_t remaining, max_copy_len = LONG_MAX;
> > + int ri = 0, ret = 0;
> > +
> > + cio = kzalloc(sizeof(struct cio), GFP_KERNEL);
> > + if (!cio)
> > + return -ENOMEM;
> > + atomic_set(&cio->refcount, 0);
> > + cio->rlist = rlist;
> > +
> > + max_copy_len = min3(max_copy_len, (sector_t)sq->limits.max_copy_sectors,
> > + (sector_t)dq->limits.max_copy_sectors);
>
> sq->limits.max_copy_sectors is already by definition smaller than
> LONG_MAX, so there is no need for the min3 here.
>
acked
> > + max_copy_len = min3(max_copy_len, (sector_t)sq->limits.max_copy_range_sectors,
> > + (sector_t)dq->limits.max_copy_range_sectors) << SECTOR_SHIFT;> +
> > + for (ri = 0; ri < nr_srcs; ri++) {
> > + cio->rlist[ri].comp_len = rlist[ri].len;
> > + for (remaining = rlist[ri].len, src_blk = rlist[ri].src, dst_blk = rlist[ri].dst;
> > + remaining > 0;
> > + remaining -= copy_len, src_blk += copy_len, dst_blk += copy_len) {
>
> This is unreadable.
>
Sure, I will simplify the loops in next version.
> > + copy_len = min(remaining, max_copy_len);
> > +
> > + token = alloc_page(gfp_mask);
> > + if (unlikely(!token)) {
> > + ret = -ENOMEM;
> > + goto err_token;
> > + }
> > +
> > + read_bio = bio_alloc(src_bdev, 1, REQ_OP_READ | REQ_COPY | REQ_NOMERGE,
> > + gfp_mask);
> > + if (!read_bio) {
> > + ret = -ENOMEM;
> > + goto err_read_bio;
> > + }
> > + read_bio->bi_iter.bi_sector = src_blk >> SECTOR_SHIFT;
> > + read_bio->bi_iter.bi_size = copy_len;
> > + __bio_add_page(read_bio, token, PAGE_SIZE, 0);
> > + ret = submit_bio_wait(read_bio);
> > + if (ret) {
> > + bio_put(read_bio);
> > + goto err_read_bio;
> > + }
> > + bio_put(read_bio);
> > + ctx = kzalloc(sizeof(struct copy_ctx), gfp_mask);
> > + if (!ctx) {
> > + ret = -ENOMEM;
> > + goto err_read_bio;
> > + }
>
> This should be done before the read.
>
acked.
> > + ctx->cio = cio;
> > + ctx->range_idx = ri;
> > + ctx->start_sec = rlist[ri].src;
> > +
> > + write_bio = bio_alloc(dst_bdev, 1, REQ_OP_WRITE | REQ_COPY | REQ_NOMERGE,
> > + gfp_mask);
> > + if (!write_bio) {
> > + ret = -ENOMEM;
> > + goto err_read_bio;
> > + }
> > +
> > + write_bio->bi_iter.bi_sector = dst_blk >> SECTOR_SHIFT;
> > + write_bio->bi_iter.bi_size = copy_len;
> > + __bio_add_page(write_bio, token, PAGE_SIZE, 0);
> > + write_bio->bi_end_io = bio_copy_end_io;
> > + write_bio->bi_private = ctx;
> > + atomic_inc(&cio->refcount);
> > + submit_bio(write_bio);
> > + }
> > + }
> > +
> > + /* Wait for completion of all IO's*/
> > + return cio_await_completion(cio);
> > +
> > +err_read_bio:
> > + __free_page(token);
> > +err_token:
> > + rlist[ri].comp_len = min_t(sector_t, rlist[ri].comp_len, (rlist[ri].len - remaining));
> > +
> > + cio->io_err = ret;
> > + return cio_await_completion(cio);
> > +}
> > +
> > +static inline int blk_copy_sanity_check(struct block_device *src_bdev,
> > + struct block_device *dst_bdev, struct range_entry *rlist, int nr)
> > +{
> > + unsigned int align_mask = max(
> > + bdev_logical_block_size(dst_bdev), bdev_logical_block_size(src_bdev)) - 1;
> > + sector_t len = 0;
> > + int i;
> > +
> > + for (i = 0; i < nr; i++) {
> > + if (rlist[i].len)
> > + len += rlist[i].len;
> > + else
> > + return -EINVAL;
> > + if ((rlist[i].dst & align_mask) || (rlist[i].src & align_mask) ||
> > + (rlist[i].len & align_mask))
> > + return -EINVAL;
> > + rlist[i].comp_len = 0;
> > + }
> > +
> > + if (!len && len >= MAX_COPY_TOTAL_LENGTH)
> > + return -EINVAL;
> > +
> > + return 0;
> > +}
> > +
> > +static inline bool blk_check_copy_offload(struct request_queue *src_q,
> > + struct request_queue *dest_q)
> > +{
> > + if (dest_q->limits.copy_offload == BLK_COPY_OFFLOAD &&
> > + src_q->limits.copy_offload == BLK_COPY_OFFLOAD)
> > + return true;
> > +
> > + return false;
> > +}
> > +
> > +/*
> > + * blkdev_issue_copy - queue a copy
> > + * @src_bdev: source block device
> > + * @nr_srcs: number of source ranges to copy
> > + * @src_rlist: array of source ranges
> > + * @dest_bdev: destination block device
> > + * @gfp_mask: memory allocation flags (for bio_alloc)
> > + * @flags: BLKDEV_COPY_* flags to control behaviour
> > + *
> > + * Description:
> > + * Copy source ranges from source block device to destination block device.
> > + * length of a source range cannot be zero.
> > + */
> > +int blkdev_issue_copy(struct block_device *src_bdev, int nr,
> > + struct range_entry *rlist, struct block_device *dest_bdev,
> > + gfp_t gfp_mask, int flags)
> > +{
> > + struct request_queue *src_q = bdev_get_queue(src_bdev);
> > + struct request_queue *dest_q = bdev_get_queue(dest_bdev);
> > + int ret = -EINVAL;
> > +
> > + if (!src_q || !dest_q)
> > + return -ENXIO;
> > +
> > + if (!nr)
> > + return -EINVAL;
> > +
> > + if (nr >= MAX_COPY_NR_RANGE)
> > + return -EINVAL;
> > +
> > + if (bdev_read_only(dest_bdev))
> > + return -EPERM;
> > +
> > + ret = blk_copy_sanity_check(src_bdev, dest_bdev, rlist, nr);
> > + if (ret)
> > + return ret;
> > +
> > + if (blk_check_copy_offload(src_q, dest_q))
> > + ret = blk_copy_offload(src_bdev, nr, rlist, dest_bdev, gfp_mask);
> > +
> > + return ret;
> > +}
> > +EXPORT_SYMBOL(blkdev_issue_copy);
> > +
> > /**
> > * __blkdev_issue_write_same - generate number of bios with same page
> > * @bdev: target blockdev
> > diff --git a/block/blk-settings.c b/block/blk-settings.c
> > index 818454552cf8..4c8d48b8af25 100644
> > --- a/block/blk-settings.c
> > +++ b/block/blk-settings.c
> > @@ -545,6 +545,8 @@ int blk_stack_limits(struct queue_limits *t, struct queue_limits *b,
> > t->max_segment_size = min_not_zero(t->max_segment_size,
> > b->max_segment_size);
> >
> > + t->max_copy_sectors = min_not_zero(t->max_copy_sectors, b->max_copy_sectors);
>
> Why min_not_zero ? If one of the underlying drive does not support copy
> offload, you cannot report that the top drive does.
>
agreed. Will update in next series.
> > +
> > t->misaligned |= b->misaligned;
> >
> > alignment = queue_limit_alignment_offset(b, start);
> > diff --git a/block/blk.h b/block/blk.h
> > index abb663a2a147..94d2b055750b 100644
> > --- a/block/blk.h
> > +++ b/block/blk.h
> > @@ -292,6 +292,8 @@ static inline bool blk_may_split(struct request_queue *q, struct bio *bio)
> > break;
> > }
> >
> > + if (unlikely(op_is_copy(bio->bi_opf)))
> > + return false;
> > /*
> > * All drivers must accept single-segments bios that are <= PAGE_SIZE.
> > * This is a quick and dirty check that relies on the fact that
> > diff --git a/include/linux/blk_types.h b/include/linux/blk_types.h
> > index 5561e58d158a..0a3fee8ad61c 100644
> > --- a/include/linux/blk_types.h
> > +++ b/include/linux/blk_types.h
> > @@ -418,6 +418,7 @@ enum req_flag_bits {
> > /* for driver use */
> > __REQ_DRV,
> > __REQ_SWAP, /* swapping request. */
> > + __REQ_COPY, /* copy request*/
> > __REQ_NR_BITS, /* stops here */
> > };
> >
> > @@ -442,6 +443,7 @@ enum req_flag_bits {
> >
> > #define REQ_DRV (1ULL << __REQ_DRV)
> > #define REQ_SWAP (1ULL << __REQ_SWAP)
> > +#define REQ_COPY (1ULL << __REQ_COPY)
> >
> > #define REQ_FAILFAST_MASK \
> > (REQ_FAILFAST_DEV | REQ_FAILFAST_TRANSPORT | REQ_FAILFAST_DRIVER)
> > @@ -498,6 +500,11 @@ static inline bool op_is_discard(unsigned int op)
> > return (op & REQ_OP_MASK) == REQ_OP_DISCARD;
> > }
> >
> > +static inline bool op_is_copy(unsigned int op)
> > +{
> > + return (op & REQ_COPY);
> > +}
> > +
> > /*
> > * Check if a bio or request operation is a zone management operation, with
> > * the exception of REQ_OP_ZONE_RESET_ALL which is treated as a special case
> > @@ -532,4 +539,17 @@ struct blk_rq_stat {
> > u64 batch;
> > };
> >
> > +struct cio {
> > + atomic_t refcount;
> > + blk_status_t io_err;
> > + struct range_entry *rlist;
> > + struct task_struct *waiter; /* waiting task (NULL if none) */
> > +};
> > +
> > +struct copy_ctx {
> > + int range_idx;
> > + sector_t start_sec;
> > + struct cio *cio;
> > +};
> > +
> > #endif /* __LINUX_BLK_TYPES_H */
> > diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h
> > index f63ae50f1de3..15597488040c 100644
> > --- a/include/linux/blkdev.h
> > +++ b/include/linux/blkdev.h
> > @@ -1120,6 +1120,9 @@ extern int __blkdev_issue_discard(struct block_device *bdev, sector_t sector,
> > struct bio **biop);
> > struct bio *bio_map_kern(struct request_queue *q, void *data, unsigned int len,
> > gfp_t gfp_mask);
> > +int blkdev_issue_copy(struct block_device *src_bdev, int nr_srcs,
> > + struct range_entry *src_rlist, struct block_device *dest_bdev,
> > + gfp_t gfp_mask, int flags);
> >
> > #define BLKDEV_ZERO_NOUNMAP (1 << 0) /* do not free blocks */
> > #define BLKDEV_ZERO_NOFALLBACK (1 << 1) /* don't write explicit zeroes */
> > diff --git a/include/uapi/linux/fs.h b/include/uapi/linux/fs.h
> > index bdf7b404b3e7..55bca8f6e8ed 100644
> > --- a/include/uapi/linux/fs.h
> > +++ b/include/uapi/linux/fs.h
> > @@ -64,6 +64,20 @@ struct fstrim_range {
> > __u64 minlen;
> > };
> >
> > +/* Maximum no of entries supported */
> > +#define MAX_COPY_NR_RANGE (1 << 12)
> > +
> > +/* maximum total copy length */
> > +#define MAX_COPY_TOTAL_LENGTH (1 << 21)
> > +
> > +/* Source range entry for copy */
> > +struct range_entry {
> > + __u64 src;
> > + __u64 dst;
> > + __u64 len;
> > + __u64 comp_len;
> > +};
> > +
> > /* extent-same (dedupe) ioctls; these MUST match the btrfs ioctl definitions */
> > #define FILE_DEDUPE_RANGE_SAME 0
> > #define FILE_DEDUPE_RANGE_DIFFERS 1
>
>
> --
> Damien Le Moal
> Western Digital Research
>
--
Thank you
Nitesh
[-- Attachment #2: Type: text/plain, Size: 0 bytes --]
[-- Attachment #3: Type: text/plain, Size: 97 bytes --]
--
dm-devel mailing list
dm-devel@redhat.com
https://listman.redhat.com/mailman/listinfo/dm-devel
^ permalink raw reply [flat|nested] 272+ messages in thread
[parent not found: <CGME20220207141924epcas5p26ad9cf5de732224f408aded12ed0a577@epcas5p2.samsung.com>]
* [PATCH v2 04/10] block: Introduce a new ioctl for copy
[not found] ` <CGME20220207141924epcas5p26ad9cf5de732224f408aded12ed0a577@epcas5p2.samsung.com>
@ 2022-02-07 14:13 ` Nitesh Shetty
0 siblings, 0 replies; 272+ messages in thread
From: Nitesh Shetty @ 2022-02-07 14:13 UTC (permalink / raw)
To: mpatocka
Cc: javier, chaitanyak, linux-block, linux-scsi, dm-devel,
linux-nvme, linux-fsdevel, axboe, msnitzer, bvanassche,
martin.petersen, roland, hare, kbusch, hch, Frederick.Knight,
zach.brown, osandov, lsf-pc, djwong, josef, clm, dsterba, tytso,
jack, joshi.k, arnav.dawn, nj.shetty
Add new BLKCOPY ioctl that offloads copying of one or more sources ranges
to one or more destination in a device. COPY ioctl accepts a 'copy_range'
structure that contains no of range, a reserved field , followed by an
array of ranges. Each source range is represented by 'range_entry' that
contains source start offset, destination start offset and length of
source ranges (in bytes)
Signed-off-by: Nitesh Shetty <nj.shetty@samsung.com>
Signed-off-by: Arnav Dawn <arnav.dawn@samsung.com>
---
block/ioctl.c | 37 +++++++++++++++++++++++++++++++++++++
include/uapi/linux/fs.h | 9 +++++++++
2 files changed, 46 insertions(+)
diff --git a/block/ioctl.c b/block/ioctl.c
index 4a86340133e4..d77f6143287e 100644
--- a/block/ioctl.c
+++ b/block/ioctl.c
@@ -124,6 +124,41 @@ static int blk_ioctl_discard(struct block_device *bdev, fmode_t mode,
return err;
}
+static int blk_ioctl_copy(struct block_device *bdev, fmode_t mode,
+ unsigned long arg)
+{
+ struct copy_range crange, *ranges;
+ size_t payload_size = 0;
+ int ret;
+
+ if (!(mode & FMODE_WRITE))
+ return -EBADF;
+
+ if (copy_from_user(&crange, (void __user *)arg, sizeof(crange)))
+ return -EFAULT;
+
+ if (unlikely(!crange.nr_range || crange.reserved || crange.nr_range >= MAX_COPY_NR_RANGE))
+ return -EINVAL;
+
+ payload_size = (crange.nr_range * sizeof(struct range_entry)) + sizeof(crange);
+
+ ranges = kmalloc(payload_size, GFP_KERNEL);
+ if (!ranges)
+ return -ENOMEM;
+
+ if (copy_from_user(ranges, (void __user *)arg, payload_size)) {
+ ret = -EFAULT;
+ goto out;
+ }
+
+ ret = blkdev_issue_copy(bdev, ranges->nr_range, ranges->range_list, bdev, GFP_KERNEL, 0);
+ if (copy_to_user((void __user *)arg, ranges, payload_size))
+ ret = -EFAULT;
+out:
+ kfree(ranges);
+ return ret;
+}
+
static int blk_ioctl_zeroout(struct block_device *bdev, fmode_t mode,
unsigned long arg)
{
@@ -455,6 +490,8 @@ static int blkdev_common_ioctl(struct block_device *bdev, fmode_t mode,
case BLKSECDISCARD:
return blk_ioctl_discard(bdev, mode, arg,
BLKDEV_DISCARD_SECURE);
+ case BLKCOPY:
+ return blk_ioctl_copy(bdev, mode, arg);
case BLKZEROOUT:
return blk_ioctl_zeroout(bdev, mode, arg);
case BLKGETDISKSEQ:
diff --git a/include/uapi/linux/fs.h b/include/uapi/linux/fs.h
index 55bca8f6e8ed..190911ea4311 100644
--- a/include/uapi/linux/fs.h
+++ b/include/uapi/linux/fs.h
@@ -78,6 +78,14 @@ struct range_entry {
__u64 comp_len;
};
+struct copy_range {
+ __u64 nr_range;
+ __u64 reserved;
+
+ /* Range_list always must be at the end */
+ struct range_entry range_list[];
+};
+
/* extent-same (dedupe) ioctls; these MUST match the btrfs ioctl definitions */
#define FILE_DEDUPE_RANGE_SAME 0
#define FILE_DEDUPE_RANGE_DIFFERS 1
@@ -199,6 +207,7 @@ struct fsxattr {
#define BLKROTATIONAL _IO(0x12,126)
#define BLKZEROOUT _IO(0x12,127)
#define BLKGETDISKSEQ _IOR(0x12,128,__u64)
+#define BLKCOPY _IOWR(0x12, 129, struct copy_range)
/*
* A jump here: 130-136 are reserved for zoned block devices
* (see uapi/linux/blkzoned.h)
--
2.30.0-rc0
^ permalink raw reply related [flat|nested] 272+ messages in thread* [dm-devel] [PATCH v2 04/10] block: Introduce a new ioctl for copy
@ 2022-02-07 14:13 ` Nitesh Shetty
0 siblings, 0 replies; 272+ messages in thread
From: Nitesh Shetty @ 2022-02-07 14:13 UTC (permalink / raw)
To: mpatocka
Cc: djwong, linux-nvme, clm, dm-devel, osandov, javier, bvanassche,
linux-scsi, hch, roland, nj.shetty, zach.brown, chaitanyak,
msnitzer, josef, linux-block, dsterba, kbusch, Frederick.Knight,
axboe, tytso, joshi.k, martin.petersen, arnav.dawn, jack,
linux-fsdevel, lsf-pc
Add new BLKCOPY ioctl that offloads copying of one or more sources ranges
to one or more destination in a device. COPY ioctl accepts a 'copy_range'
structure that contains no of range, a reserved field , followed by an
array of ranges. Each source range is represented by 'range_entry' that
contains source start offset, destination start offset and length of
source ranges (in bytes)
Signed-off-by: Nitesh Shetty <nj.shetty@samsung.com>
Signed-off-by: Arnav Dawn <arnav.dawn@samsung.com>
---
block/ioctl.c | 37 +++++++++++++++++++++++++++++++++++++
include/uapi/linux/fs.h | 9 +++++++++
2 files changed, 46 insertions(+)
diff --git a/block/ioctl.c b/block/ioctl.c
index 4a86340133e4..d77f6143287e 100644
--- a/block/ioctl.c
+++ b/block/ioctl.c
@@ -124,6 +124,41 @@ static int blk_ioctl_discard(struct block_device *bdev, fmode_t mode,
return err;
}
+static int blk_ioctl_copy(struct block_device *bdev, fmode_t mode,
+ unsigned long arg)
+{
+ struct copy_range crange, *ranges;
+ size_t payload_size = 0;
+ int ret;
+
+ if (!(mode & FMODE_WRITE))
+ return -EBADF;
+
+ if (copy_from_user(&crange, (void __user *)arg, sizeof(crange)))
+ return -EFAULT;
+
+ if (unlikely(!crange.nr_range || crange.reserved || crange.nr_range >= MAX_COPY_NR_RANGE))
+ return -EINVAL;
+
+ payload_size = (crange.nr_range * sizeof(struct range_entry)) + sizeof(crange);
+
+ ranges = kmalloc(payload_size, GFP_KERNEL);
+ if (!ranges)
+ return -ENOMEM;
+
+ if (copy_from_user(ranges, (void __user *)arg, payload_size)) {
+ ret = -EFAULT;
+ goto out;
+ }
+
+ ret = blkdev_issue_copy(bdev, ranges->nr_range, ranges->range_list, bdev, GFP_KERNEL, 0);
+ if (copy_to_user((void __user *)arg, ranges, payload_size))
+ ret = -EFAULT;
+out:
+ kfree(ranges);
+ return ret;
+}
+
static int blk_ioctl_zeroout(struct block_device *bdev, fmode_t mode,
unsigned long arg)
{
@@ -455,6 +490,8 @@ static int blkdev_common_ioctl(struct block_device *bdev, fmode_t mode,
case BLKSECDISCARD:
return blk_ioctl_discard(bdev, mode, arg,
BLKDEV_DISCARD_SECURE);
+ case BLKCOPY:
+ return blk_ioctl_copy(bdev, mode, arg);
case BLKZEROOUT:
return blk_ioctl_zeroout(bdev, mode, arg);
case BLKGETDISKSEQ:
diff --git a/include/uapi/linux/fs.h b/include/uapi/linux/fs.h
index 55bca8f6e8ed..190911ea4311 100644
--- a/include/uapi/linux/fs.h
+++ b/include/uapi/linux/fs.h
@@ -78,6 +78,14 @@ struct range_entry {
__u64 comp_len;
};
+struct copy_range {
+ __u64 nr_range;
+ __u64 reserved;
+
+ /* Range_list always must be at the end */
+ struct range_entry range_list[];
+};
+
/* extent-same (dedupe) ioctls; these MUST match the btrfs ioctl definitions */
#define FILE_DEDUPE_RANGE_SAME 0
#define FILE_DEDUPE_RANGE_DIFFERS 1
@@ -199,6 +207,7 @@ struct fsxattr {
#define BLKROTATIONAL _IO(0x12,126)
#define BLKZEROOUT _IO(0x12,127)
#define BLKGETDISKSEQ _IOR(0x12,128,__u64)
+#define BLKCOPY _IOWR(0x12, 129, struct copy_range)
/*
* A jump here: 130-136 are reserved for zoned block devices
* (see uapi/linux/blkzoned.h)
--
2.30.0-rc0
--
dm-devel mailing list
dm-devel@redhat.com
https://listman.redhat.com/mailman/listinfo/dm-devel
^ permalink raw reply related [flat|nested] 272+ messages in thread* Re: [dm-devel] [PATCH v2 04/10] block: Introduce a new ioctl for copy
2022-02-07 14:13 ` [dm-devel] " Nitesh Shetty
(?)
@ 2022-02-09 3:39 ` kernel test robot
-1 siblings, 0 replies; 272+ messages in thread
From: kernel test robot @ 2022-02-09 3:39 UTC (permalink / raw)
To: Nitesh Shetty, mpatocka
Cc: djwong, linux-nvme, clm, dm-devel, osandov, javier, bvanassche,
linux-scsi, hch, roland, nj.shetty, zach.brown, chaitanyak,
msnitzer, josef, linux-block, dsterba, kbusch, tytso,
Frederick.Knight, axboe, kbuild-all, joshi.k, martin.petersen,
arnav.dawn, jack, linux-fsdevel, lsf-pc
Hi Nitesh,
Thank you for the patch! Perhaps something to improve:
[auto build test WARNING on axboe-block/for-next]
[also build test WARNING on next-20220208]
[If your patch is applied to the wrong git tree, kindly drop us a note.
And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch]
url: https://github.com/0day-ci/linux/commits/Nitesh-Shetty/block-make-bio_map_kern-non-static/20220207-231407
base: https://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux-block.git for-next
config: i386-randconfig-c001 (https://download.01.org/0day-ci/archive/20220209/202202091048.qDQvi6ab-lkp@intel.com/config)
compiler: gcc-9 (Debian 9.3.0-22) 9.3.0
If you fix the issue, kindly add following tag as appropriate
Reported-by: kernel test robot <lkp@intel.com>
cocci warnings: (new ones prefixed by >>)
>> block/ioctl.c:145:10-17: WARNING opportunity for memdup_user
vim +145 block/ioctl.c
126
127 static int blk_ioctl_copy(struct block_device *bdev, fmode_t mode,
128 unsigned long arg)
129 {
130 struct copy_range crange, *ranges;
131 size_t payload_size = 0;
132 int ret;
133
134 if (!(mode & FMODE_WRITE))
135 return -EBADF;
136
137 if (copy_from_user(&crange, (void __user *)arg, sizeof(crange)))
138 return -EFAULT;
139
140 if (unlikely(!crange.nr_range || crange.reserved || crange.nr_range >= MAX_COPY_NR_RANGE))
141 return -EINVAL;
142
143 payload_size = (crange.nr_range * sizeof(struct range_entry)) + sizeof(crange);
144
> 145 ranges = kmalloc(payload_size, GFP_KERNEL);
146 if (!ranges)
147 return -ENOMEM;
148
149 if (copy_from_user(ranges, (void __user *)arg, payload_size)) {
150 ret = -EFAULT;
151 goto out;
152 }
153
154 ret = blkdev_issue_copy(bdev, ranges->nr_range, ranges->range_list, bdev, GFP_KERNEL, 0);
155 if (copy_to_user((void __user *)arg, ranges, payload_size))
156 ret = -EFAULT;
157 out:
158 kfree(ranges);
159 return ret;
160 }
161
---
0-DAY CI Kernel Test Service, Intel Corporation
https://lists.01.org/hyperkitty/list/kbuild-all@lists.01.org
--
dm-devel mailing list
dm-devel@redhat.com
https://listman.redhat.com/mailman/listinfo/dm-devel
^ permalink raw reply [flat|nested] 272+ messages in thread* Re: [PATCH v2 04/10] block: Introduce a new ioctl for copy
@ 2022-02-09 3:39 ` kernel test robot
0 siblings, 0 replies; 272+ messages in thread
From: kernel test robot @ 2022-02-09 3:39 UTC (permalink / raw)
To: kbuild-all
[-- Attachment #1: Type: text/plain, Size: 2257 bytes --]
Hi Nitesh,
Thank you for the patch! Perhaps something to improve:
[auto build test WARNING on axboe-block/for-next]
[also build test WARNING on next-20220208]
[If your patch is applied to the wrong git tree, kindly drop us a note.
And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch]
url: https://github.com/0day-ci/linux/commits/Nitesh-Shetty/block-make-bio_map_kern-non-static/20220207-231407
base: https://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux-block.git for-next
config: i386-randconfig-c001 (https://download.01.org/0day-ci/archive/20220209/202202091048.qDQvi6ab-lkp(a)intel.com/config)
compiler: gcc-9 (Debian 9.3.0-22) 9.3.0
If you fix the issue, kindly add following tag as appropriate
Reported-by: kernel test robot <lkp@intel.com>
cocci warnings: (new ones prefixed by >>)
>> block/ioctl.c:145:10-17: WARNING opportunity for memdup_user
vim +145 block/ioctl.c
126
127 static int blk_ioctl_copy(struct block_device *bdev, fmode_t mode,
128 unsigned long arg)
129 {
130 struct copy_range crange, *ranges;
131 size_t payload_size = 0;
132 int ret;
133
134 if (!(mode & FMODE_WRITE))
135 return -EBADF;
136
137 if (copy_from_user(&crange, (void __user *)arg, sizeof(crange)))
138 return -EFAULT;
139
140 if (unlikely(!crange.nr_range || crange.reserved || crange.nr_range >= MAX_COPY_NR_RANGE))
141 return -EINVAL;
142
143 payload_size = (crange.nr_range * sizeof(struct range_entry)) + sizeof(crange);
144
> 145 ranges = kmalloc(payload_size, GFP_KERNEL);
146 if (!ranges)
147 return -ENOMEM;
148
149 if (copy_from_user(ranges, (void __user *)arg, payload_size)) {
150 ret = -EFAULT;
151 goto out;
152 }
153
154 ret = blkdev_issue_copy(bdev, ranges->nr_range, ranges->range_list, bdev, GFP_KERNEL, 0);
155 if (copy_to_user((void __user *)arg, ranges, payload_size))
156 ret = -EFAULT;
157 out:
158 kfree(ranges);
159 return ret;
160 }
161
---
0-DAY CI Kernel Test Service, Intel Corporation
https://lists.01.org/hyperkitty/list/kbuild-all(a)lists.01.org
^ permalink raw reply [flat|nested] 272+ messages in thread* Re: [PATCH v2 04/10] block: Introduce a new ioctl for copy
@ 2022-02-09 3:39 ` kernel test robot
0 siblings, 0 replies; 272+ messages in thread
From: kernel test robot @ 2022-02-09 3:39 UTC (permalink / raw)
To: Nitesh Shetty, mpatocka
Cc: kbuild-all, javier, chaitanyak, linux-block, linux-scsi,
dm-devel, linux-nvme, linux-fsdevel, axboe, msnitzer, bvanassche,
martin.petersen, roland, hare, kbusch, hch, Frederick.Knight,
zach.brown, osandov, lsf-pc, djwong, josef, clm, dsterba, tytso,
jack, joshi.k, arnav.dawn, nj.shetty
Hi Nitesh,
Thank you for the patch! Perhaps something to improve:
[auto build test WARNING on axboe-block/for-next]
[also build test WARNING on next-20220208]
[If your patch is applied to the wrong git tree, kindly drop us a note.
And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch]
url: https://github.com/0day-ci/linux/commits/Nitesh-Shetty/block-make-bio_map_kern-non-static/20220207-231407
base: https://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux-block.git for-next
config: i386-randconfig-c001 (https://download.01.org/0day-ci/archive/20220209/202202091048.qDQvi6ab-lkp@intel.com/config)
compiler: gcc-9 (Debian 9.3.0-22) 9.3.0
If you fix the issue, kindly add following tag as appropriate
Reported-by: kernel test robot <lkp@intel.com>
cocci warnings: (new ones prefixed by >>)
>> block/ioctl.c:145:10-17: WARNING opportunity for memdup_user
vim +145 block/ioctl.c
126
127 static int blk_ioctl_copy(struct block_device *bdev, fmode_t mode,
128 unsigned long arg)
129 {
130 struct copy_range crange, *ranges;
131 size_t payload_size = 0;
132 int ret;
133
134 if (!(mode & FMODE_WRITE))
135 return -EBADF;
136
137 if (copy_from_user(&crange, (void __user *)arg, sizeof(crange)))
138 return -EFAULT;
139
140 if (unlikely(!crange.nr_range || crange.reserved || crange.nr_range >= MAX_COPY_NR_RANGE))
141 return -EINVAL;
142
143 payload_size = (crange.nr_range * sizeof(struct range_entry)) + sizeof(crange);
144
> 145 ranges = kmalloc(payload_size, GFP_KERNEL);
146 if (!ranges)
147 return -ENOMEM;
148
149 if (copy_from_user(ranges, (void __user *)arg, payload_size)) {
150 ret = -EFAULT;
151 goto out;
152 }
153
154 ret = blkdev_issue_copy(bdev, ranges->nr_range, ranges->range_list, bdev, GFP_KERNEL, 0);
155 if (copy_to_user((void __user *)arg, ranges, payload_size))
156 ret = -EFAULT;
157 out:
158 kfree(ranges);
159 return ret;
160 }
161
---
0-DAY CI Kernel Test Service, Intel Corporation
https://lists.01.org/hyperkitty/list/kbuild-all@lists.01.org
^ permalink raw reply [flat|nested] 272+ messages in thread
[parent not found: <CGME20220207141930epcas5p2bcbff65f78ad1dede64648d73ddb3770@epcas5p2.samsung.com>]
* [PATCH v2 05/10] block: add emulation for copy
[not found] ` <CGME20220207141930epcas5p2bcbff65f78ad1dede64648d73ddb3770@epcas5p2.samsung.com>
@ 2022-02-07 14:13 ` Nitesh Shetty
0 siblings, 0 replies; 272+ messages in thread
From: Nitesh Shetty @ 2022-02-07 14:13 UTC (permalink / raw)
To: mpatocka
Cc: javier, chaitanyak, linux-block, linux-scsi, dm-devel,
linux-nvme, linux-fsdevel, axboe, msnitzer, bvanassche,
martin.petersen, roland, hare, kbusch, hch, Frederick.Knight,
zach.brown, osandov, lsf-pc, djwong, josef, clm, dsterba, tytso,
jack, joshi.k, arnav.dawn, nj.shetty
For the devices which does not support copy, copy emulation is
added. Copy-emulation is implemented by reading from source ranges
into memory and writing to the corresponding destination synchronously.
TODO: Optimise emulation.
Signed-off-by: Nitesh Shetty <nj.shetty@samsung.com>
---
block/blk-lib.c | 119 ++++++++++++++++++++++++++++++++++++++++++++++++
1 file changed, 119 insertions(+)
diff --git a/block/blk-lib.c b/block/blk-lib.c
index 3ae2c27b566e..05c8cd02fffc 100644
--- a/block/blk-lib.c
+++ b/block/blk-lib.c
@@ -272,6 +272,65 @@ int blk_copy_offload(struct block_device *src_bdev, int nr_srcs,
return cio_await_completion(cio);
}
+int blk_submit_rw_buf(struct block_device *bdev, void *buf, sector_t buf_len,
+ sector_t sector, unsigned int op, gfp_t gfp_mask)
+{
+ struct request_queue *q = bdev_get_queue(bdev);
+ struct bio *bio, *parent = NULL;
+ sector_t max_hw_len = min_t(unsigned int, queue_max_hw_sectors(q),
+ queue_max_segments(q) << (PAGE_SHIFT - SECTOR_SHIFT)) << SECTOR_SHIFT;
+ sector_t len, remaining;
+ int ret;
+
+ for (remaining = buf_len; remaining > 0; remaining -= len) {
+ len = min_t(int, max_hw_len, remaining);
+retry:
+ bio = bio_map_kern(q, buf, len, gfp_mask);
+ if (IS_ERR(bio)) {
+ len >>= 1;
+ if (len)
+ goto retry;
+ return PTR_ERR(bio);
+ }
+
+ bio->bi_iter.bi_sector = sector >> SECTOR_SHIFT;
+ bio->bi_opf = op;
+ bio_set_dev(bio, bdev);
+ bio->bi_end_io = NULL;
+ bio->bi_private = NULL;
+
+ if (parent) {
+ bio_chain(parent, bio);
+ submit_bio(parent);
+ }
+ parent = bio;
+ sector += len;
+ buf = (char *) buf + len;
+ }
+ ret = submit_bio_wait(bio);
+ bio_put(bio);
+
+ return ret;
+}
+
+static void *blk_alloc_buf(sector_t req_size, sector_t *alloc_size, gfp_t gfp_mask)
+{
+ int min_size = PAGE_SIZE;
+ void *buf;
+
+ while (req_size >= min_size) {
+ buf = kvmalloc(req_size, gfp_mask);
+ if (buf) {
+ *alloc_size = req_size;
+ return buf;
+ }
+ /* retry half the requested size */
+ req_size >>= 1;
+ }
+
+ return NULL;
+}
+
static inline int blk_copy_sanity_check(struct block_device *src_bdev,
struct block_device *dst_bdev, struct range_entry *rlist, int nr)
{
@@ -297,6 +356,64 @@ static inline int blk_copy_sanity_check(struct block_device *src_bdev,
return 0;
}
+static inline sector_t blk_copy_max_range(struct range_entry *rlist, int nr, sector_t *max_len)
+{
+ int i;
+ sector_t len = 0;
+
+ *max_len = 0;
+ for (i = 0; i < nr; i++) {
+ *max_len = max(*max_len, rlist[i].len);
+ len += rlist[i].len;
+ }
+
+ return len;
+}
+
+/*
+ * If native copy offload feature is absent, this function tries to emulate,
+ * by copying data from source to a temporary buffer and from buffer to
+ * destination device.
+ */
+static int blk_copy_emulate(struct block_device *src_bdev, int nr,
+ struct range_entry *rlist, struct block_device *dest_bdev, gfp_t gfp_mask)
+{
+ void *buf = NULL;
+ int ret, nr_i = 0;
+ sector_t src, dst, copy_len, buf_len, read_len, copied_len, max_len = 0, remaining = 0;
+
+ copy_len = blk_copy_max_range(rlist, nr, &max_len);
+ buf = blk_alloc_buf(max_len, &buf_len, gfp_mask);
+ if (!buf)
+ return -ENOMEM;
+
+ for (copied_len = 0; copied_len < copy_len; copied_len += read_len) {
+ if (!remaining) {
+ rlist[nr_i].comp_len = 0;
+ src = rlist[nr_i].src;
+ dst = rlist[nr_i].dst;
+ remaining = rlist[nr_i++].len;
+ }
+
+ read_len = min_t(sector_t, remaining, buf_len);
+ ret = blk_submit_rw_buf(src_bdev, buf, read_len, src, REQ_OP_READ, gfp_mask);
+ if (ret)
+ goto out;
+ src += read_len;
+ remaining -= read_len;
+ ret = blk_submit_rw_buf(dest_bdev, buf, read_len, dst, REQ_OP_WRITE,
+ gfp_mask);
+ if (ret)
+ goto out;
+ else
+ rlist[nr_i - 1].comp_len += read_len;
+ dst += read_len;
+ }
+out:
+ kvfree(buf);
+ return ret;
+}
+
static inline bool blk_check_copy_offload(struct request_queue *src_q,
struct request_queue *dest_q)
{
@@ -346,6 +463,8 @@ int blkdev_issue_copy(struct block_device *src_bdev, int nr,
if (blk_check_copy_offload(src_q, dest_q))
ret = blk_copy_offload(src_bdev, nr, rlist, dest_bdev, gfp_mask);
+ else
+ ret = blk_copy_emulate(src_bdev, nr, rlist, dest_bdev, gfp_mask);
return ret;
}
--
2.30.0-rc0
^ permalink raw reply related [flat|nested] 272+ messages in thread* [dm-devel] [PATCH v2 05/10] block: add emulation for copy
@ 2022-02-07 14:13 ` Nitesh Shetty
0 siblings, 0 replies; 272+ messages in thread
From: Nitesh Shetty @ 2022-02-07 14:13 UTC (permalink / raw)
To: mpatocka
Cc: djwong, linux-nvme, clm, dm-devel, osandov, javier, bvanassche,
linux-scsi, hch, roland, nj.shetty, zach.brown, chaitanyak,
msnitzer, josef, linux-block, dsterba, kbusch, Frederick.Knight,
axboe, tytso, joshi.k, martin.petersen, arnav.dawn, jack,
linux-fsdevel, lsf-pc
For the devices which does not support copy, copy emulation is
added. Copy-emulation is implemented by reading from source ranges
into memory and writing to the corresponding destination synchronously.
TODO: Optimise emulation.
Signed-off-by: Nitesh Shetty <nj.shetty@samsung.com>
---
block/blk-lib.c | 119 ++++++++++++++++++++++++++++++++++++++++++++++++
1 file changed, 119 insertions(+)
diff --git a/block/blk-lib.c b/block/blk-lib.c
index 3ae2c27b566e..05c8cd02fffc 100644
--- a/block/blk-lib.c
+++ b/block/blk-lib.c
@@ -272,6 +272,65 @@ int blk_copy_offload(struct block_device *src_bdev, int nr_srcs,
return cio_await_completion(cio);
}
+int blk_submit_rw_buf(struct block_device *bdev, void *buf, sector_t buf_len,
+ sector_t sector, unsigned int op, gfp_t gfp_mask)
+{
+ struct request_queue *q = bdev_get_queue(bdev);
+ struct bio *bio, *parent = NULL;
+ sector_t max_hw_len = min_t(unsigned int, queue_max_hw_sectors(q),
+ queue_max_segments(q) << (PAGE_SHIFT - SECTOR_SHIFT)) << SECTOR_SHIFT;
+ sector_t len, remaining;
+ int ret;
+
+ for (remaining = buf_len; remaining > 0; remaining -= len) {
+ len = min_t(int, max_hw_len, remaining);
+retry:
+ bio = bio_map_kern(q, buf, len, gfp_mask);
+ if (IS_ERR(bio)) {
+ len >>= 1;
+ if (len)
+ goto retry;
+ return PTR_ERR(bio);
+ }
+
+ bio->bi_iter.bi_sector = sector >> SECTOR_SHIFT;
+ bio->bi_opf = op;
+ bio_set_dev(bio, bdev);
+ bio->bi_end_io = NULL;
+ bio->bi_private = NULL;
+
+ if (parent) {
+ bio_chain(parent, bio);
+ submit_bio(parent);
+ }
+ parent = bio;
+ sector += len;
+ buf = (char *) buf + len;
+ }
+ ret = submit_bio_wait(bio);
+ bio_put(bio);
+
+ return ret;
+}
+
+static void *blk_alloc_buf(sector_t req_size, sector_t *alloc_size, gfp_t gfp_mask)
+{
+ int min_size = PAGE_SIZE;
+ void *buf;
+
+ while (req_size >= min_size) {
+ buf = kvmalloc(req_size, gfp_mask);
+ if (buf) {
+ *alloc_size = req_size;
+ return buf;
+ }
+ /* retry half the requested size */
+ req_size >>= 1;
+ }
+
+ return NULL;
+}
+
static inline int blk_copy_sanity_check(struct block_device *src_bdev,
struct block_device *dst_bdev, struct range_entry *rlist, int nr)
{
@@ -297,6 +356,64 @@ static inline int blk_copy_sanity_check(struct block_device *src_bdev,
return 0;
}
+static inline sector_t blk_copy_max_range(struct range_entry *rlist, int nr, sector_t *max_len)
+{
+ int i;
+ sector_t len = 0;
+
+ *max_len = 0;
+ for (i = 0; i < nr; i++) {
+ *max_len = max(*max_len, rlist[i].len);
+ len += rlist[i].len;
+ }
+
+ return len;
+}
+
+/*
+ * If native copy offload feature is absent, this function tries to emulate,
+ * by copying data from source to a temporary buffer and from buffer to
+ * destination device.
+ */
+static int blk_copy_emulate(struct block_device *src_bdev, int nr,
+ struct range_entry *rlist, struct block_device *dest_bdev, gfp_t gfp_mask)
+{
+ void *buf = NULL;
+ int ret, nr_i = 0;
+ sector_t src, dst, copy_len, buf_len, read_len, copied_len, max_len = 0, remaining = 0;
+
+ copy_len = blk_copy_max_range(rlist, nr, &max_len);
+ buf = blk_alloc_buf(max_len, &buf_len, gfp_mask);
+ if (!buf)
+ return -ENOMEM;
+
+ for (copied_len = 0; copied_len < copy_len; copied_len += read_len) {
+ if (!remaining) {
+ rlist[nr_i].comp_len = 0;
+ src = rlist[nr_i].src;
+ dst = rlist[nr_i].dst;
+ remaining = rlist[nr_i++].len;
+ }
+
+ read_len = min_t(sector_t, remaining, buf_len);
+ ret = blk_submit_rw_buf(src_bdev, buf, read_len, src, REQ_OP_READ, gfp_mask);
+ if (ret)
+ goto out;
+ src += read_len;
+ remaining -= read_len;
+ ret = blk_submit_rw_buf(dest_bdev, buf, read_len, dst, REQ_OP_WRITE,
+ gfp_mask);
+ if (ret)
+ goto out;
+ else
+ rlist[nr_i - 1].comp_len += read_len;
+ dst += read_len;
+ }
+out:
+ kvfree(buf);
+ return ret;
+}
+
static inline bool blk_check_copy_offload(struct request_queue *src_q,
struct request_queue *dest_q)
{
@@ -346,6 +463,8 @@ int blkdev_issue_copy(struct block_device *src_bdev, int nr,
if (blk_check_copy_offload(src_q, dest_q))
ret = blk_copy_offload(src_bdev, nr, rlist, dest_bdev, gfp_mask);
+ else
+ ret = blk_copy_emulate(src_bdev, nr, rlist, dest_bdev, gfp_mask);
return ret;
}
--
2.30.0-rc0
--
dm-devel mailing list
dm-devel@redhat.com
https://listman.redhat.com/mailman/listinfo/dm-devel
^ permalink raw reply related [flat|nested] 272+ messages in thread* Re: [PATCH v2 05/10] block: add emulation for copy
2022-02-07 14:13 ` [dm-devel] " Nitesh Shetty
(?)
@ 2022-02-08 3:20 ` kernel test robot
-1 siblings, 0 replies; 272+ messages in thread
From: kernel test robot @ 2022-02-08 3:20 UTC (permalink / raw)
To: Nitesh Shetty, mpatocka
Cc: kbuild-all, javier, chaitanyak, linux-block, linux-scsi,
dm-devel, linux-nvme, linux-fsdevel, axboe, msnitzer
Hi Nitesh,
Thank you for the patch! Perhaps something to improve:
[auto build test WARNING on axboe-block/for-next]
[also build test WARNING on next-20220207]
[If your patch is applied to the wrong git tree, kindly drop us a note.
And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch]
url: https://github.com/0day-ci/linux/commits/Nitesh-Shetty/block-make-bio_map_kern-non-static/20220207-231407
base: https://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux-block.git for-next
config: nios2-randconfig-r001-20220207 (https://download.01.org/0day-ci/archive/20220208/202202081132.axCkiVgv-lkp@intel.com/config)
compiler: nios2-linux-gcc (GCC) 11.2.0
reproduce (this is a W=1 build):
wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
chmod +x ~/bin/make.cross
# https://github.com/0day-ci/linux/commit/a7bb30870db803af4ad955a968992222bcfb478f
git remote add linux-review https://github.com/0day-ci/linux
git fetch --no-tags linux-review Nitesh-Shetty/block-make-bio_map_kern-non-static/20220207-231407
git checkout a7bb30870db803af4ad955a968992222bcfb478f
# save the config file to linux build tree
mkdir build_dir
COMPILER_INSTALL_PATH=$HOME/0day COMPILER=gcc-11.2.0 make.cross O=build_dir ARCH=nios2 SHELL=/bin/bash
If you fix the issue, kindly add following tag as appropriate
Reported-by: kernel test robot <lkp@intel.com>
All warnings (new ones prefixed by >>):
block/blk-lib.c:185:5: warning: no previous prototype for 'blk_copy_offload' [-Wmissing-prototypes]
185 | int blk_copy_offload(struct block_device *src_bdev, int nr_srcs,
| ^~~~~~~~~~~~~~~~
>> block/blk-lib.c:275:5: warning: no previous prototype for 'blk_submit_rw_buf' [-Wmissing-prototypes]
275 | int blk_submit_rw_buf(struct block_device *bdev, void *buf, sector_t buf_len,
| ^~~~~~~~~~~~~~~~~
vim +/blk_submit_rw_buf +275 block/blk-lib.c
180
181 /*
182 * blk_copy_offload - Use device's native copy offload feature
183 * Go through user provide payload, prepare new payload based on device's copy offload limits.
184 */
> 185 int blk_copy_offload(struct block_device *src_bdev, int nr_srcs,
186 struct range_entry *rlist, struct block_device *dst_bdev, gfp_t gfp_mask)
187 {
188 struct request_queue *sq = bdev_get_queue(src_bdev);
189 struct request_queue *dq = bdev_get_queue(dst_bdev);
190 struct bio *read_bio, *write_bio;
191 struct copy_ctx *ctx;
192 struct cio *cio;
193 struct page *token;
194 sector_t src_blk, copy_len, dst_blk;
195 sector_t remaining, max_copy_len = LONG_MAX;
196 int ri = 0, ret = 0;
197
198 cio = kzalloc(sizeof(struct cio), GFP_KERNEL);
199 if (!cio)
200 return -ENOMEM;
201 atomic_set(&cio->refcount, 0);
202 cio->rlist = rlist;
203
204 max_copy_len = min3(max_copy_len, (sector_t)sq->limits.max_copy_sectors,
205 (sector_t)dq->limits.max_copy_sectors);
206 max_copy_len = min3(max_copy_len, (sector_t)sq->limits.max_copy_range_sectors,
207 (sector_t)dq->limits.max_copy_range_sectors) << SECTOR_SHIFT;
208
209 for (ri = 0; ri < nr_srcs; ri++) {
210 cio->rlist[ri].comp_len = rlist[ri].len;
211 for (remaining = rlist[ri].len, src_blk = rlist[ri].src, dst_blk = rlist[ri].dst;
212 remaining > 0;
213 remaining -= copy_len, src_blk += copy_len, dst_blk += copy_len) {
214 copy_len = min(remaining, max_copy_len);
215
216 token = alloc_page(gfp_mask);
217 if (unlikely(!token)) {
218 ret = -ENOMEM;
219 goto err_token;
220 }
221
222 read_bio = bio_alloc(src_bdev, 1, REQ_OP_READ | REQ_COPY | REQ_NOMERGE,
223 gfp_mask);
224 if (!read_bio) {
225 ret = -ENOMEM;
226 goto err_read_bio;
227 }
228 read_bio->bi_iter.bi_sector = src_blk >> SECTOR_SHIFT;
229 read_bio->bi_iter.bi_size = copy_len;
230 __bio_add_page(read_bio, token, PAGE_SIZE, 0);
231 ret = submit_bio_wait(read_bio);
232 if (ret) {
233 bio_put(read_bio);
234 goto err_read_bio;
235 }
236 bio_put(read_bio);
237 ctx = kzalloc(sizeof(struct copy_ctx), gfp_mask);
238 if (!ctx) {
239 ret = -ENOMEM;
240 goto err_read_bio;
241 }
242 ctx->cio = cio;
243 ctx->range_idx = ri;
244 ctx->start_sec = rlist[ri].src;
245
246 write_bio = bio_alloc(dst_bdev, 1, REQ_OP_WRITE | REQ_COPY | REQ_NOMERGE,
247 gfp_mask);
248 if (!write_bio) {
249 ret = -ENOMEM;
250 goto err_read_bio;
251 }
252
253 write_bio->bi_iter.bi_sector = dst_blk >> SECTOR_SHIFT;
254 write_bio->bi_iter.bi_size = copy_len;
255 __bio_add_page(write_bio, token, PAGE_SIZE, 0);
256 write_bio->bi_end_io = bio_copy_end_io;
257 write_bio->bi_private = ctx;
258 atomic_inc(&cio->refcount);
259 submit_bio(write_bio);
260 }
261 }
262
263 /* Wait for completion of all IO's*/
264 return cio_await_completion(cio);
265
266 err_read_bio:
267 __free_page(token);
268 err_token:
269 rlist[ri].comp_len = min_t(sector_t, rlist[ri].comp_len, (rlist[ri].len - remaining));
270
271 cio->io_err = ret;
272 return cio_await_completion(cio);
273 }
274
> 275 int blk_submit_rw_buf(struct block_device *bdev, void *buf, sector_t buf_len,
276 sector_t sector, unsigned int op, gfp_t gfp_mask)
277 {
278 struct request_queue *q = bdev_get_queue(bdev);
279 struct bio *bio, *parent = NULL;
280 sector_t max_hw_len = min_t(unsigned int, queue_max_hw_sectors(q),
281 queue_max_segments(q) << (PAGE_SHIFT - SECTOR_SHIFT)) << SECTOR_SHIFT;
282 sector_t len, remaining;
283 int ret;
284
285 for (remaining = buf_len; remaining > 0; remaining -= len) {
286 len = min_t(int, max_hw_len, remaining);
287 retry:
288 bio = bio_map_kern(q, buf, len, gfp_mask);
289 if (IS_ERR(bio)) {
290 len >>= 1;
291 if (len)
292 goto retry;
293 return PTR_ERR(bio);
294 }
295
296 bio->bi_iter.bi_sector = sector >> SECTOR_SHIFT;
297 bio->bi_opf = op;
298 bio_set_dev(bio, bdev);
299 bio->bi_end_io = NULL;
300 bio->bi_private = NULL;
301
302 if (parent) {
303 bio_chain(parent, bio);
304 submit_bio(parent);
305 }
306 parent = bio;
307 sector += len;
308 buf = (char *) buf + len;
309 }
310 ret = submit_bio_wait(bio);
311 bio_put(bio);
312
313 return ret;
314 }
315
---
0-DAY CI Kernel Test Service, Intel Corporation
https://lists.01.org/hyperkitty/list/kbuild-all@lists.01.org
^ permalink raw reply [flat|nested] 272+ messages in thread* Re: [PATCH v2 05/10] block: add emulation for copy
@ 2022-02-08 3:20 ` kernel test robot
0 siblings, 0 replies; 272+ messages in thread
From: kernel test robot @ 2022-02-08 3:20 UTC (permalink / raw)
To: kbuild-all
[-- Attachment #1: Type: text/plain, Size: 7043 bytes --]
Hi Nitesh,
Thank you for the patch! Perhaps something to improve:
[auto build test WARNING on axboe-block/for-next]
[also build test WARNING on next-20220207]
[If your patch is applied to the wrong git tree, kindly drop us a note.
And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch]
url: https://github.com/0day-ci/linux/commits/Nitesh-Shetty/block-make-bio_map_kern-non-static/20220207-231407
base: https://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux-block.git for-next
config: nios2-randconfig-r001-20220207 (https://download.01.org/0day-ci/archive/20220208/202202081132.axCkiVgv-lkp(a)intel.com/config)
compiler: nios2-linux-gcc (GCC) 11.2.0
reproduce (this is a W=1 build):
wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
chmod +x ~/bin/make.cross
# https://github.com/0day-ci/linux/commit/a7bb30870db803af4ad955a968992222bcfb478f
git remote add linux-review https://github.com/0day-ci/linux
git fetch --no-tags linux-review Nitesh-Shetty/block-make-bio_map_kern-non-static/20220207-231407
git checkout a7bb30870db803af4ad955a968992222bcfb478f
# save the config file to linux build tree
mkdir build_dir
COMPILER_INSTALL_PATH=$HOME/0day COMPILER=gcc-11.2.0 make.cross O=build_dir ARCH=nios2 SHELL=/bin/bash
If you fix the issue, kindly add following tag as appropriate
Reported-by: kernel test robot <lkp@intel.com>
All warnings (new ones prefixed by >>):
block/blk-lib.c:185:5: warning: no previous prototype for 'blk_copy_offload' [-Wmissing-prototypes]
185 | int blk_copy_offload(struct block_device *src_bdev, int nr_srcs,
| ^~~~~~~~~~~~~~~~
>> block/blk-lib.c:275:5: warning: no previous prototype for 'blk_submit_rw_buf' [-Wmissing-prototypes]
275 | int blk_submit_rw_buf(struct block_device *bdev, void *buf, sector_t buf_len,
| ^~~~~~~~~~~~~~~~~
vim +/blk_submit_rw_buf +275 block/blk-lib.c
180
181 /*
182 * blk_copy_offload - Use device's native copy offload feature
183 * Go through user provide payload, prepare new payload based on device's copy offload limits.
184 */
> 185 int blk_copy_offload(struct block_device *src_bdev, int nr_srcs,
186 struct range_entry *rlist, struct block_device *dst_bdev, gfp_t gfp_mask)
187 {
188 struct request_queue *sq = bdev_get_queue(src_bdev);
189 struct request_queue *dq = bdev_get_queue(dst_bdev);
190 struct bio *read_bio, *write_bio;
191 struct copy_ctx *ctx;
192 struct cio *cio;
193 struct page *token;
194 sector_t src_blk, copy_len, dst_blk;
195 sector_t remaining, max_copy_len = LONG_MAX;
196 int ri = 0, ret = 0;
197
198 cio = kzalloc(sizeof(struct cio), GFP_KERNEL);
199 if (!cio)
200 return -ENOMEM;
201 atomic_set(&cio->refcount, 0);
202 cio->rlist = rlist;
203
204 max_copy_len = min3(max_copy_len, (sector_t)sq->limits.max_copy_sectors,
205 (sector_t)dq->limits.max_copy_sectors);
206 max_copy_len = min3(max_copy_len, (sector_t)sq->limits.max_copy_range_sectors,
207 (sector_t)dq->limits.max_copy_range_sectors) << SECTOR_SHIFT;
208
209 for (ri = 0; ri < nr_srcs; ri++) {
210 cio->rlist[ri].comp_len = rlist[ri].len;
211 for (remaining = rlist[ri].len, src_blk = rlist[ri].src, dst_blk = rlist[ri].dst;
212 remaining > 0;
213 remaining -= copy_len, src_blk += copy_len, dst_blk += copy_len) {
214 copy_len = min(remaining, max_copy_len);
215
216 token = alloc_page(gfp_mask);
217 if (unlikely(!token)) {
218 ret = -ENOMEM;
219 goto err_token;
220 }
221
222 read_bio = bio_alloc(src_bdev, 1, REQ_OP_READ | REQ_COPY | REQ_NOMERGE,
223 gfp_mask);
224 if (!read_bio) {
225 ret = -ENOMEM;
226 goto err_read_bio;
227 }
228 read_bio->bi_iter.bi_sector = src_blk >> SECTOR_SHIFT;
229 read_bio->bi_iter.bi_size = copy_len;
230 __bio_add_page(read_bio, token, PAGE_SIZE, 0);
231 ret = submit_bio_wait(read_bio);
232 if (ret) {
233 bio_put(read_bio);
234 goto err_read_bio;
235 }
236 bio_put(read_bio);
237 ctx = kzalloc(sizeof(struct copy_ctx), gfp_mask);
238 if (!ctx) {
239 ret = -ENOMEM;
240 goto err_read_bio;
241 }
242 ctx->cio = cio;
243 ctx->range_idx = ri;
244 ctx->start_sec = rlist[ri].src;
245
246 write_bio = bio_alloc(dst_bdev, 1, REQ_OP_WRITE | REQ_COPY | REQ_NOMERGE,
247 gfp_mask);
248 if (!write_bio) {
249 ret = -ENOMEM;
250 goto err_read_bio;
251 }
252
253 write_bio->bi_iter.bi_sector = dst_blk >> SECTOR_SHIFT;
254 write_bio->bi_iter.bi_size = copy_len;
255 __bio_add_page(write_bio, token, PAGE_SIZE, 0);
256 write_bio->bi_end_io = bio_copy_end_io;
257 write_bio->bi_private = ctx;
258 atomic_inc(&cio->refcount);
259 submit_bio(write_bio);
260 }
261 }
262
263 /* Wait for completion of all IO's*/
264 return cio_await_completion(cio);
265
266 err_read_bio:
267 __free_page(token);
268 err_token:
269 rlist[ri].comp_len = min_t(sector_t, rlist[ri].comp_len, (rlist[ri].len - remaining));
270
271 cio->io_err = ret;
272 return cio_await_completion(cio);
273 }
274
> 275 int blk_submit_rw_buf(struct block_device *bdev, void *buf, sector_t buf_len,
276 sector_t sector, unsigned int op, gfp_t gfp_mask)
277 {
278 struct request_queue *q = bdev_get_queue(bdev);
279 struct bio *bio, *parent = NULL;
280 sector_t max_hw_len = min_t(unsigned int, queue_max_hw_sectors(q),
281 queue_max_segments(q) << (PAGE_SHIFT - SECTOR_SHIFT)) << SECTOR_SHIFT;
282 sector_t len, remaining;
283 int ret;
284
285 for (remaining = buf_len; remaining > 0; remaining -= len) {
286 len = min_t(int, max_hw_len, remaining);
287 retry:
288 bio = bio_map_kern(q, buf, len, gfp_mask);
289 if (IS_ERR(bio)) {
290 len >>= 1;
291 if (len)
292 goto retry;
293 return PTR_ERR(bio);
294 }
295
296 bio->bi_iter.bi_sector = sector >> SECTOR_SHIFT;
297 bio->bi_opf = op;
298 bio_set_dev(bio, bdev);
299 bio->bi_end_io = NULL;
300 bio->bi_private = NULL;
301
302 if (parent) {
303 bio_chain(parent, bio);
304 submit_bio(parent);
305 }
306 parent = bio;
307 sector += len;
308 buf = (char *) buf + len;
309 }
310 ret = submit_bio_wait(bio);
311 bio_put(bio);
312
313 return ret;
314 }
315
---
0-DAY CI Kernel Test Service, Intel Corporation
https://lists.01.org/hyperkitty/list/kbuild-all(a)lists.01.org
^ permalink raw reply [flat|nested] 272+ messages in thread* Re: [dm-devel] [PATCH v2 05/10] block: add emulation for copy
@ 2022-02-08 3:20 ` kernel test robot
0 siblings, 0 replies; 272+ messages in thread
From: kernel test robot @ 2022-02-08 3:20 UTC (permalink / raw)
To: Nitesh Shetty, mpatocka
Cc: axboe, javier, msnitzer, kbuild-all, linux-scsi, chaitanyak,
linux-nvme, linux-block, dm-devel, linux-fsdevel
Hi Nitesh,
Thank you for the patch! Perhaps something to improve:
[auto build test WARNING on axboe-block/for-next]
[also build test WARNING on next-20220207]
[If your patch is applied to the wrong git tree, kindly drop us a note.
And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch]
url: https://github.com/0day-ci/linux/commits/Nitesh-Shetty/block-make-bio_map_kern-non-static/20220207-231407
base: https://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux-block.git for-next
config: nios2-randconfig-r001-20220207 (https://download.01.org/0day-ci/archive/20220208/202202081132.axCkiVgv-lkp@intel.com/config)
compiler: nios2-linux-gcc (GCC) 11.2.0
reproduce (this is a W=1 build):
wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
chmod +x ~/bin/make.cross
# https://github.com/0day-ci/linux/commit/a7bb30870db803af4ad955a968992222bcfb478f
git remote add linux-review https://github.com/0day-ci/linux
git fetch --no-tags linux-review Nitesh-Shetty/block-make-bio_map_kern-non-static/20220207-231407
git checkout a7bb30870db803af4ad955a968992222bcfb478f
# save the config file to linux build tree
mkdir build_dir
COMPILER_INSTALL_PATH=$HOME/0day COMPILER=gcc-11.2.0 make.cross O=build_dir ARCH=nios2 SHELL=/bin/bash
If you fix the issue, kindly add following tag as appropriate
Reported-by: kernel test robot <lkp@intel.com>
All warnings (new ones prefixed by >>):
block/blk-lib.c:185:5: warning: no previous prototype for 'blk_copy_offload' [-Wmissing-prototypes]
185 | int blk_copy_offload(struct block_device *src_bdev, int nr_srcs,
| ^~~~~~~~~~~~~~~~
>> block/blk-lib.c:275:5: warning: no previous prototype for 'blk_submit_rw_buf' [-Wmissing-prototypes]
275 | int blk_submit_rw_buf(struct block_device *bdev, void *buf, sector_t buf_len,
| ^~~~~~~~~~~~~~~~~
vim +/blk_submit_rw_buf +275 block/blk-lib.c
180
181 /*
182 * blk_copy_offload - Use device's native copy offload feature
183 * Go through user provide payload, prepare new payload based on device's copy offload limits.
184 */
> 185 int blk_copy_offload(struct block_device *src_bdev, int nr_srcs,
186 struct range_entry *rlist, struct block_device *dst_bdev, gfp_t gfp_mask)
187 {
188 struct request_queue *sq = bdev_get_queue(src_bdev);
189 struct request_queue *dq = bdev_get_queue(dst_bdev);
190 struct bio *read_bio, *write_bio;
191 struct copy_ctx *ctx;
192 struct cio *cio;
193 struct page *token;
194 sector_t src_blk, copy_len, dst_blk;
195 sector_t remaining, max_copy_len = LONG_MAX;
196 int ri = 0, ret = 0;
197
198 cio = kzalloc(sizeof(struct cio), GFP_KERNEL);
199 if (!cio)
200 return -ENOMEM;
201 atomic_set(&cio->refcount, 0);
202 cio->rlist = rlist;
203
204 max_copy_len = min3(max_copy_len, (sector_t)sq->limits.max_copy_sectors,
205 (sector_t)dq->limits.max_copy_sectors);
206 max_copy_len = min3(max_copy_len, (sector_t)sq->limits.max_copy_range_sectors,
207 (sector_t)dq->limits.max_copy_range_sectors) << SECTOR_SHIFT;
208
209 for (ri = 0; ri < nr_srcs; ri++) {
210 cio->rlist[ri].comp_len = rlist[ri].len;
211 for (remaining = rlist[ri].len, src_blk = rlist[ri].src, dst_blk = rlist[ri].dst;
212 remaining > 0;
213 remaining -= copy_len, src_blk += copy_len, dst_blk += copy_len) {
214 copy_len = min(remaining, max_copy_len);
215
216 token = alloc_page(gfp_mask);
217 if (unlikely(!token)) {
218 ret = -ENOMEM;
219 goto err_token;
220 }
221
222 read_bio = bio_alloc(src_bdev, 1, REQ_OP_READ | REQ_COPY | REQ_NOMERGE,
223 gfp_mask);
224 if (!read_bio) {
225 ret = -ENOMEM;
226 goto err_read_bio;
227 }
228 read_bio->bi_iter.bi_sector = src_blk >> SECTOR_SHIFT;
229 read_bio->bi_iter.bi_size = copy_len;
230 __bio_add_page(read_bio, token, PAGE_SIZE, 0);
231 ret = submit_bio_wait(read_bio);
232 if (ret) {
233 bio_put(read_bio);
234 goto err_read_bio;
235 }
236 bio_put(read_bio);
237 ctx = kzalloc(sizeof(struct copy_ctx), gfp_mask);
238 if (!ctx) {
239 ret = -ENOMEM;
240 goto err_read_bio;
241 }
242 ctx->cio = cio;
243 ctx->range_idx = ri;
244 ctx->start_sec = rlist[ri].src;
245
246 write_bio = bio_alloc(dst_bdev, 1, REQ_OP_WRITE | REQ_COPY | REQ_NOMERGE,
247 gfp_mask);
248 if (!write_bio) {
249 ret = -ENOMEM;
250 goto err_read_bio;
251 }
252
253 write_bio->bi_iter.bi_sector = dst_blk >> SECTOR_SHIFT;
254 write_bio->bi_iter.bi_size = copy_len;
255 __bio_add_page(write_bio, token, PAGE_SIZE, 0);
256 write_bio->bi_end_io = bio_copy_end_io;
257 write_bio->bi_private = ctx;
258 atomic_inc(&cio->refcount);
259 submit_bio(write_bio);
260 }
261 }
262
263 /* Wait for completion of all IO's*/
264 return cio_await_completion(cio);
265
266 err_read_bio:
267 __free_page(token);
268 err_token:
269 rlist[ri].comp_len = min_t(sector_t, rlist[ri].comp_len, (rlist[ri].len - remaining));
270
271 cio->io_err = ret;
272 return cio_await_completion(cio);
273 }
274
> 275 int blk_submit_rw_buf(struct block_device *bdev, void *buf, sector_t buf_len,
276 sector_t sector, unsigned int op, gfp_t gfp_mask)
277 {
278 struct request_queue *q = bdev_get_queue(bdev);
279 struct bio *bio, *parent = NULL;
280 sector_t max_hw_len = min_t(unsigned int, queue_max_hw_sectors(q),
281 queue_max_segments(q) << (PAGE_SHIFT - SECTOR_SHIFT)) << SECTOR_SHIFT;
282 sector_t len, remaining;
283 int ret;
284
285 for (remaining = buf_len; remaining > 0; remaining -= len) {
286 len = min_t(int, max_hw_len, remaining);
287 retry:
288 bio = bio_map_kern(q, buf, len, gfp_mask);
289 if (IS_ERR(bio)) {
290 len >>= 1;
291 if (len)
292 goto retry;
293 return PTR_ERR(bio);
294 }
295
296 bio->bi_iter.bi_sector = sector >> SECTOR_SHIFT;
297 bio->bi_opf = op;
298 bio_set_dev(bio, bdev);
299 bio->bi_end_io = NULL;
300 bio->bi_private = NULL;
301
302 if (parent) {
303 bio_chain(parent, bio);
304 submit_bio(parent);
305 }
306 parent = bio;
307 sector += len;
308 buf = (char *) buf + len;
309 }
310 ret = submit_bio_wait(bio);
311 bio_put(bio);
312
313 return ret;
314 }
315
---
0-DAY CI Kernel Test Service, Intel Corporation
https://lists.01.org/hyperkitty/list/kbuild-all@lists.01.org
--
dm-devel mailing list
dm-devel@redhat.com
https://listman.redhat.com/mailman/listinfo/dm-devel
^ permalink raw reply [flat|nested] 272+ messages in thread
* Re: [PATCH v2 05/10] block: add emulation for copy
2022-02-07 14:13 ` [dm-devel] " Nitesh Shetty
@ 2022-02-16 13:32 ` Mikulas Patocka
-1 siblings, 0 replies; 272+ messages in thread
From: Mikulas Patocka @ 2022-02-16 13:32 UTC (permalink / raw)
To: Nitesh Shetty
Cc: javier, chaitanyak, linux-block, linux-scsi, dm-devel,
linux-nvme, linux-fsdevel, axboe, msnitzer, bvanassche,
martin.petersen, roland, hare, kbusch, hch, Frederick.Knight,
zach.brown, osandov, lsf-pc, djwong, josef, clm, dsterba, tytso,
jack, joshi.k, arnav.dawn
On Mon, 7 Feb 2022, Nitesh Shetty wrote:
> + goto retry;
> + return PTR_ERR(bio);
> + }
> +
> + bio->bi_iter.bi_sector = sector >> SECTOR_SHIFT;
> + bio->bi_opf = op;
> + bio_set_dev(bio, bdev);
> @@ -346,6 +463,8 @@ int blkdev_issue_copy(struct block_device *src_bdev, int nr,
>
> if (blk_check_copy_offload(src_q, dest_q))
> ret = blk_copy_offload(src_bdev, nr, rlist, dest_bdev, gfp_mask);
> + else
> + ret = blk_copy_emulate(src_bdev, nr, rlist, dest_bdev, gfp_mask);
>
> return ret;
> }
The emulation is not reliable because a device mapper device may be
reconfigured and it may lose the copy capability between the calls to
blk_check_copy_offload and blk_copy_offload.
You should call blk_copy_emulate if blk_copy_offload returns an error.
Mikulas
^ permalink raw reply [flat|nested] 272+ messages in thread
* Re: [dm-devel] [PATCH v2 05/10] block: add emulation for copy
@ 2022-02-16 13:32 ` Mikulas Patocka
0 siblings, 0 replies; 272+ messages in thread
From: Mikulas Patocka @ 2022-02-16 13:32 UTC (permalink / raw)
To: Nitesh Shetty
Cc: djwong, linux-nvme, clm, dm-devel, osandov, javier, bvanassche,
linux-scsi, hch, roland, zach.brown, chaitanyak, msnitzer, josef,
linux-block, dsterba, kbusch, Frederick.Knight, axboe, tytso,
joshi.k, martin.petersen, arnav.dawn, jack, linux-fsdevel,
lsf-pc
On Mon, 7 Feb 2022, Nitesh Shetty wrote:
> + goto retry;
> + return PTR_ERR(bio);
> + }
> +
> + bio->bi_iter.bi_sector = sector >> SECTOR_SHIFT;
> + bio->bi_opf = op;
> + bio_set_dev(bio, bdev);
> @@ -346,6 +463,8 @@ int blkdev_issue_copy(struct block_device *src_bdev, int nr,
>
> if (blk_check_copy_offload(src_q, dest_q))
> ret = blk_copy_offload(src_bdev, nr, rlist, dest_bdev, gfp_mask);
> + else
> + ret = blk_copy_emulate(src_bdev, nr, rlist, dest_bdev, gfp_mask);
>
> return ret;
> }
The emulation is not reliable because a device mapper device may be
reconfigured and it may lose the copy capability between the calls to
blk_check_copy_offload and blk_copy_offload.
You should call blk_copy_emulate if blk_copy_offload returns an error.
Mikulas
--
dm-devel mailing list
dm-devel@redhat.com
https://listman.redhat.com/mailman/listinfo/dm-devel
^ permalink raw reply [flat|nested] 272+ messages in thread
* Re: [PATCH v2 05/10] block: add emulation for copy
2022-02-16 13:32 ` [dm-devel] " Mikulas Patocka
@ 2022-02-17 13:18 ` Nitesh Shetty
-1 siblings, 0 replies; 272+ messages in thread
From: Nitesh Shetty @ 2022-02-17 13:18 UTC (permalink / raw)
To: Mikulas Patocka
Cc: javier, chaitanyak, linux-block, linux-scsi, dm-devel,
linux-nvme, linux-fsdevel, axboe, msnitzer, bvanassche,
martin.petersen, roland, hare, kbusch, hch, Frederick.Knight,
zach.brown, osandov, lsf-pc, djwong, josef, clm, dsterba, tytso,
jack, joshi.k, arnav.dawn
[-- Attachment #1: Type: text/plain, Size: 1057 bytes --]
On Wed, Feb 16, 2022 at 08:32:45AM -0500, Mikulas Patocka wrote:
>
>
> On Mon, 7 Feb 2022, Nitesh Shetty wrote:
>
> > + goto retry;
> > + return PTR_ERR(bio);
> > + }
> > +
> > + bio->bi_iter.bi_sector = sector >> SECTOR_SHIFT;
> > + bio->bi_opf = op;
> > + bio_set_dev(bio, bdev);
> > @@ -346,6 +463,8 @@ int blkdev_issue_copy(struct block_device *src_bdev, int nr,
> >
> > if (blk_check_copy_offload(src_q, dest_q))
> > ret = blk_copy_offload(src_bdev, nr, rlist, dest_bdev, gfp_mask);
> > + else
> > + ret = blk_copy_emulate(src_bdev, nr, rlist, dest_bdev, gfp_mask);
> >
> > return ret;
> > }
>
> The emulation is not reliable because a device mapper device may be
> reconfigured and it may lose the copy capability between the calls to
> blk_check_copy_offload and blk_copy_offload.
>
> You should call blk_copy_emulate if blk_copy_offload returns an error.
>
> Mikulas
>
>
I agree, it was in our todo list to fallback to emulation for partial
copy offload failures. In next version we will add this.
--
Nitesh Shetty
[-- Attachment #2: Type: text/plain, Size: 0 bytes --]
^ permalink raw reply [flat|nested] 272+ messages in thread
* Re: [dm-devel] [PATCH v2 05/10] block: add emulation for copy
@ 2022-02-17 13:18 ` Nitesh Shetty
0 siblings, 0 replies; 272+ messages in thread
From: Nitesh Shetty @ 2022-02-17 13:18 UTC (permalink / raw)
To: Mikulas Patocka
Cc: djwong, linux-nvme, clm, dm-devel, osandov, javier, bvanassche,
linux-scsi, hch, roland, zach.brown, chaitanyak, msnitzer, josef,
linux-block, dsterba, kbusch, Frederick.Knight, axboe, tytso,
joshi.k, martin.petersen, arnav.dawn, jack, linux-fsdevel,
lsf-pc
[-- Attachment #1: Type: text/plain, Size: 1057 bytes --]
On Wed, Feb 16, 2022 at 08:32:45AM -0500, Mikulas Patocka wrote:
>
>
> On Mon, 7 Feb 2022, Nitesh Shetty wrote:
>
> > + goto retry;
> > + return PTR_ERR(bio);
> > + }
> > +
> > + bio->bi_iter.bi_sector = sector >> SECTOR_SHIFT;
> > + bio->bi_opf = op;
> > + bio_set_dev(bio, bdev);
> > @@ -346,6 +463,8 @@ int blkdev_issue_copy(struct block_device *src_bdev, int nr,
> >
> > if (blk_check_copy_offload(src_q, dest_q))
> > ret = blk_copy_offload(src_bdev, nr, rlist, dest_bdev, gfp_mask);
> > + else
> > + ret = blk_copy_emulate(src_bdev, nr, rlist, dest_bdev, gfp_mask);
> >
> > return ret;
> > }
>
> The emulation is not reliable because a device mapper device may be
> reconfigured and it may lose the copy capability between the calls to
> blk_check_copy_offload and blk_copy_offload.
>
> You should call blk_copy_emulate if blk_copy_offload returns an error.
>
> Mikulas
>
>
I agree, it was in our todo list to fallback to emulation for partial
copy offload failures. In next version we will add this.
--
Nitesh Shetty
[-- Attachment #2: Type: text/plain, Size: 0 bytes --]
[-- Attachment #3: Type: text/plain, Size: 97 bytes --]
--
dm-devel mailing list
dm-devel@redhat.com
https://listman.redhat.com/mailman/listinfo/dm-devel
^ permalink raw reply [flat|nested] 272+ messages in thread
[parent not found: <CGME20220207141937epcas5p2bd57ae35056c69b3e2f9ee2348d6af19@epcas5p2.samsung.com>]
* [PATCH v2 06/10] nvme: add copy support
[not found] ` <CGME20220207141937epcas5p2bd57ae35056c69b3e2f9ee2348d6af19@epcas5p2.samsung.com>
@ 2022-02-07 14:13 ` Nitesh Shetty
0 siblings, 0 replies; 272+ messages in thread
From: Nitesh Shetty @ 2022-02-07 14:13 UTC (permalink / raw)
To: mpatocka
Cc: javier, chaitanyak, linux-block, linux-scsi, dm-devel,
linux-nvme, linux-fsdevel, axboe, msnitzer, bvanassche,
martin.petersen, roland, hare, kbusch, hch, Frederick.Knight,
zach.brown, osandov, lsf-pc, djwong, josef, clm, dsterba, tytso,
jack, joshi.k, arnav.dawn, nj.shetty, SelvaKumar S,
Javier González
From: SelvaKumar S <selvakuma.s1@samsung.com>
Add support for Copy command
For device supporting native copy, nvme driver receives read and
write request with BLK_COPY op flags.
For read request the nvme driver populates the payload with source
information.
For write request the driver converts it to nvme copy command using the
source information in the payload and submits to the device.
current design only supports single source range.
Ths design is courtsey Mikulas Patocka's token based copy
trace event support for nvme_copy_cmd.
Set the device copy limits to queue limits. By default copy_offload
is disabled.
Signed-off-by: SelvaKumar S <selvakuma.s1@samsung.com>
Signed-off-by: Kanchan Joshi <joshi.k@samsung.com>
Signed-off-by: Nitesh Shetty <nj.shetty@samsung.com>
Signed-off-by: Javier González <javier.gonz@samsung.com>
---
drivers/nvme/host/core.c | 121 +++++++++++++++++++++++++++++++++++++-
drivers/nvme/host/nvme.h | 7 +++
drivers/nvme/host/pci.c | 9 +++
drivers/nvme/host/trace.c | 19 ++++++
include/linux/nvme.h | 43 +++++++++++++-
5 files changed, 194 insertions(+), 5 deletions(-)
diff --git a/drivers/nvme/host/core.c b/drivers/nvme/host/core.c
index 5e0bfda04bd7..49458001472e 100644
--- a/drivers/nvme/host/core.c
+++ b/drivers/nvme/host/core.c
@@ -821,6 +821,90 @@ static inline void nvme_setup_flush(struct nvme_ns *ns,
cmnd->common.nsid = cpu_to_le32(ns->head->ns_id);
}
+static inline blk_status_t nvme_setup_copy_read(struct nvme_ns *ns, struct request *req)
+{
+ struct bio *bio = req->bio;
+ struct nvme_copy_token *token = bvec_kmap_local(&bio->bi_io_vec[0]);
+
+ memcpy(token->subsys, "nvme", 4);
+ token->ns = ns;
+ token->src_sector = bio->bi_iter.bi_sector;
+ token->sectors = bio->bi_iter.bi_size >> 9;
+
+ return 0;
+}
+
+static inline blk_status_t nvme_setup_copy_write(struct nvme_ns *ns,
+ struct request *req, struct nvme_command *cmnd)
+{
+ struct nvme_ctrl *ctrl = ns->ctrl;
+ struct nvme_copy_range *range = NULL;
+ struct bio *bio = req->bio;
+ struct nvme_copy_token *token = bvec_kmap_local(&bio->bi_io_vec[0]);
+ sector_t src_sector, dst_sector, n_sectors;
+ u64 src_lba, dst_lba, n_lba;
+ unsigned short nr_range = 1;
+ u16 control = 0;
+ u32 dsmgmt = 0;
+
+ if (unlikely(memcmp(token->subsys, "nvme", 4)))
+ return BLK_STS_NOTSUPP;
+ if (unlikely(token->ns != ns))
+ return BLK_STS_NOTSUPP;
+
+ src_sector = token->src_sector;
+ dst_sector = bio->bi_iter.bi_sector;
+ n_sectors = token->sectors;
+ if (WARN_ON(n_sectors != bio->bi_iter.bi_size >> 9))
+ return BLK_STS_NOTSUPP;
+
+ src_lba = nvme_sect_to_lba(ns, src_sector);
+ dst_lba = nvme_sect_to_lba(ns, dst_sector);
+ n_lba = nvme_sect_to_lba(ns, n_sectors);
+
+ if (unlikely(nvme_lba_to_sect(ns, src_lba) != src_sector) ||
+ unlikely(nvme_lba_to_sect(ns, dst_lba) != dst_sector) ||
+ unlikely(nvme_lba_to_sect(ns, n_lba) != n_sectors))
+ return BLK_STS_NOTSUPP;
+
+ if (WARN_ON(!n_lba))
+ return BLK_STS_NOTSUPP;
+
+ if (req->cmd_flags & REQ_FUA)
+ control |= NVME_RW_FUA;
+
+ if (req->cmd_flags & REQ_FAILFAST_DEV)
+ control |= NVME_RW_LR;
+
+ memset(cmnd, 0, sizeof(*cmnd));
+ cmnd->copy.opcode = nvme_cmd_copy;
+ cmnd->copy.nsid = cpu_to_le32(ns->head->ns_id);
+ cmnd->copy.sdlba = cpu_to_le64(blk_rq_pos(req) >> (ns->lba_shift - 9));
+
+ range = kmalloc_array(nr_range, sizeof(*range),
+ GFP_ATOMIC | __GFP_NOWARN);
+ if (!range)
+ return BLK_STS_RESOURCE;
+
+ range[0].slba = cpu_to_le64(src_lba);
+ range[0].nlb = cpu_to_le16(n_lba - 1);
+
+ cmnd->copy.nr_range = 0;
+
+ req->special_vec.bv_page = virt_to_page(range);
+ req->special_vec.bv_offset = offset_in_page(range);
+ req->special_vec.bv_len = sizeof(*range) * nr_range;
+ req->rq_flags |= RQF_SPECIAL_PAYLOAD;
+
+ if (ctrl->nr_streams)
+ nvme_assign_write_stream(ctrl, req, &control, &dsmgmt);
+
+ cmnd->copy.control = cpu_to_le16(control);
+ cmnd->copy.dspec = cpu_to_le32(dsmgmt);
+
+ return BLK_STS_OK;
+}
+
static blk_status_t nvme_setup_discard(struct nvme_ns *ns, struct request *req,
struct nvme_command *cmnd)
{
@@ -1024,10 +1108,16 @@ blk_status_t nvme_setup_cmd(struct nvme_ns *ns, struct request *req)
ret = nvme_setup_discard(ns, req, cmd);
break;
case REQ_OP_READ:
- ret = nvme_setup_rw(ns, req, cmd, nvme_cmd_read);
+ if (unlikely(req->cmd_flags & REQ_COPY))
+ ret = nvme_setup_copy_read(ns, req);
+ else
+ ret = nvme_setup_rw(ns, req, cmd, nvme_cmd_read);
break;
case REQ_OP_WRITE:
- ret = nvme_setup_rw(ns, req, cmd, nvme_cmd_write);
+ if (unlikely(req->cmd_flags & REQ_COPY))
+ ret = nvme_setup_copy_write(ns, req, cmd);
+ else
+ ret = nvme_setup_rw(ns, req, cmd, nvme_cmd_write);
break;
case REQ_OP_ZONE_APPEND:
ret = nvme_setup_rw(ns, req, cmd, nvme_cmd_zone_append);
@@ -1682,6 +1772,31 @@ static void nvme_config_discard(struct gendisk *disk, struct nvme_ns *ns)
blk_queue_max_write_zeroes_sectors(queue, UINT_MAX);
}
+static void nvme_config_copy(struct gendisk *disk, struct nvme_ns *ns,
+ struct nvme_id_ns *id)
+{
+ struct nvme_ctrl *ctrl = ns->ctrl;
+ struct request_queue *queue = disk->queue;
+
+ if (!(ctrl->oncs & NVME_CTRL_ONCS_COPY)) {
+ queue->limits.copy_offload = 0;
+ queue->limits.max_copy_sectors = 0;
+ queue->limits.max_copy_range_sectors = 0;
+ queue->limits.max_copy_nr_ranges = 0;
+ blk_queue_flag_clear(QUEUE_FLAG_COPY, queue);
+ return;
+ }
+
+ /* setting copy limits */
+ blk_queue_flag_test_and_set(QUEUE_FLAG_COPY, queue);
+ queue->limits.copy_offload = 0;
+ queue->limits.max_copy_sectors = le64_to_cpu(id->mcl) *
+ (1 << (ns->lba_shift - 9));
+ queue->limits.max_copy_range_sectors = le32_to_cpu(id->mssrl) *
+ (1 << (ns->lba_shift - 9));
+ queue->limits.max_copy_nr_ranges = id->msrc + 1;
+}
+
static bool nvme_ns_ids_valid(struct nvme_ns_ids *ids)
{
return !uuid_is_null(&ids->uuid) ||
@@ -1864,6 +1979,7 @@ static void nvme_update_disk_info(struct gendisk *disk,
nvme_config_discard(disk, ns);
blk_queue_max_write_zeroes_sectors(disk->queue,
ns->ctrl->max_zeroes_sectors);
+ nvme_config_copy(disk, ns, id);
set_disk_ro(disk, (id->nsattr & NVME_NS_ATTR_RO) ||
test_bit(NVME_NS_FORCE_RO, &ns->flags));
@@ -4721,6 +4837,7 @@ static inline void _nvme_check_size(void)
BUILD_BUG_ON(sizeof(struct nvme_download_firmware) != 64);
BUILD_BUG_ON(sizeof(struct nvme_format_cmd) != 64);
BUILD_BUG_ON(sizeof(struct nvme_dsm_cmd) != 64);
+ BUILD_BUG_ON(sizeof(struct nvme_copy_command) != 64);
BUILD_BUG_ON(sizeof(struct nvme_write_zeroes_cmd) != 64);
BUILD_BUG_ON(sizeof(struct nvme_abort_cmd) != 64);
BUILD_BUG_ON(sizeof(struct nvme_get_log_page_command) != 64);
diff --git a/drivers/nvme/host/nvme.h b/drivers/nvme/host/nvme.h
index a162f6c6da6e..117658a8cf5f 100644
--- a/drivers/nvme/host/nvme.h
+++ b/drivers/nvme/host/nvme.h
@@ -474,6 +474,13 @@ struct nvme_ns {
};
+struct nvme_copy_token {
+ char subsys[4];
+ struct nvme_ns *ns;
+ u64 src_sector;
+ u64 sectors;
+};
+
/* NVMe ns supports metadata actions by the controller (generate/strip) */
static inline bool nvme_ns_has_pi(struct nvme_ns *ns)
{
diff --git a/drivers/nvme/host/pci.c b/drivers/nvme/host/pci.c
index 6a99ed680915..a7b0f129a19d 100644
--- a/drivers/nvme/host/pci.c
+++ b/drivers/nvme/host/pci.c
@@ -916,6 +916,11 @@ static blk_status_t nvme_prep_rq(struct nvme_dev *dev, struct request *req)
if (ret)
return ret;
+ if (unlikely((req->cmd_flags & REQ_COPY) && (req_op(req) == REQ_OP_READ))) {
+ blk_mq_end_request(req, BLK_STS_OK);
+ return BLK_STS_OK;
+ }
+
if (blk_rq_nr_phys_segments(req)) {
ret = nvme_map_data(dev, req, &iod->cmd);
if (ret)
@@ -929,6 +934,7 @@ static blk_status_t nvme_prep_rq(struct nvme_dev *dev, struct request *req)
}
blk_mq_start_request(req);
+
return BLK_STS_OK;
out_unmap_data:
nvme_unmap_data(dev, req);
@@ -962,6 +968,9 @@ static blk_status_t nvme_queue_rq(struct blk_mq_hw_ctx *hctx,
ret = nvme_prep_rq(dev, req);
if (unlikely(ret))
return ret;
+ if (unlikely((req->cmd_flags & REQ_COPY) && (req_op(req) == REQ_OP_READ)))
+ return ret;
+
spin_lock(&nvmeq->sq_lock);
nvme_sq_copy_cmd(nvmeq, &iod->cmd);
nvme_write_sq_db(nvmeq, bd->last);
diff --git a/drivers/nvme/host/trace.c b/drivers/nvme/host/trace.c
index 2a89c5aa0790..ab72bf546a13 100644
--- a/drivers/nvme/host/trace.c
+++ b/drivers/nvme/host/trace.c
@@ -150,6 +150,23 @@ static const char *nvme_trace_read_write(struct trace_seq *p, u8 *cdw10)
return ret;
}
+static const char *nvme_trace_copy(struct trace_seq *p, u8 *cdw10)
+{
+ const char *ret = trace_seq_buffer_ptr(p);
+ u64 slba = get_unaligned_le64(cdw10);
+ u8 nr_range = get_unaligned_le16(cdw10 + 8);
+ u16 control = get_unaligned_le16(cdw10 + 10);
+ u32 dsmgmt = get_unaligned_le32(cdw10 + 12);
+ u32 reftag = get_unaligned_le32(cdw10 + 16);
+
+ trace_seq_printf(p,
+ "slba=%llu, nr_range=%u, ctrl=0x%x, dsmgmt=%u, reftag=%u",
+ slba, nr_range, control, dsmgmt, reftag);
+ trace_seq_putc(p, 0);
+
+ return ret;
+}
+
static const char *nvme_trace_dsm(struct trace_seq *p, u8 *cdw10)
{
const char *ret = trace_seq_buffer_ptr(p);
@@ -243,6 +260,8 @@ const char *nvme_trace_parse_nvm_cmd(struct trace_seq *p,
return nvme_trace_zone_mgmt_send(p, cdw10);
case nvme_cmd_zone_mgmt_recv:
return nvme_trace_zone_mgmt_recv(p, cdw10);
+ case nvme_cmd_copy:
+ return nvme_trace_copy(p, cdw10);
default:
return nvme_trace_common(p, cdw10);
}
diff --git a/include/linux/nvme.h b/include/linux/nvme.h
index 855dd9b3e84b..7ed966058f4c 100644
--- a/include/linux/nvme.h
+++ b/include/linux/nvme.h
@@ -309,7 +309,7 @@ struct nvme_id_ctrl {
__u8 nvscc;
__u8 nwpc;
__le16 acwu;
- __u8 rsvd534[2];
+ __le16 ocfs;
__le32 sgls;
__le32 mnan;
__u8 rsvd544[224];
@@ -335,6 +335,7 @@ enum {
NVME_CTRL_ONCS_WRITE_ZEROES = 1 << 3,
NVME_CTRL_ONCS_RESERVATIONS = 1 << 5,
NVME_CTRL_ONCS_TIMESTAMP = 1 << 6,
+ NVME_CTRL_ONCS_COPY = 1 << 8,
NVME_CTRL_VWC_PRESENT = 1 << 0,
NVME_CTRL_OACS_SEC_SUPP = 1 << 0,
NVME_CTRL_OACS_DIRECTIVES = 1 << 5,
@@ -383,7 +384,10 @@ struct nvme_id_ns {
__le16 npdg;
__le16 npda;
__le16 nows;
- __u8 rsvd74[18];
+ __le16 mssrl;
+ __le32 mcl;
+ __u8 msrc;
+ __u8 rsvd91[11];
__le32 anagrpid;
__u8 rsvd96[3];
__u8 nsattr;
@@ -704,6 +708,7 @@ enum nvme_opcode {
nvme_cmd_resv_report = 0x0e,
nvme_cmd_resv_acquire = 0x11,
nvme_cmd_resv_release = 0x15,
+ nvme_cmd_copy = 0x19,
nvme_cmd_zone_mgmt_send = 0x79,
nvme_cmd_zone_mgmt_recv = 0x7a,
nvme_cmd_zone_append = 0x7d,
@@ -725,7 +730,8 @@ enum nvme_opcode {
nvme_opcode_name(nvme_cmd_resv_release), \
nvme_opcode_name(nvme_cmd_zone_mgmt_send), \
nvme_opcode_name(nvme_cmd_zone_mgmt_recv), \
- nvme_opcode_name(nvme_cmd_zone_append))
+ nvme_opcode_name(nvme_cmd_zone_append), \
+ nvme_opcode_name(nvme_cmd_copy))
@@ -898,6 +904,36 @@ struct nvme_dsm_range {
__le64 slba;
};
+struct nvme_copy_command {
+ __u8 opcode;
+ __u8 flags;
+ __u16 command_id;
+ __le32 nsid;
+ __u64 rsvd2;
+ __le64 metadata;
+ union nvme_data_ptr dptr;
+ __le64 sdlba;
+ __u8 nr_range;
+ __u8 rsvd12;
+ __le16 control;
+ __le16 rsvd13;
+ __le16 dspec;
+ __le32 ilbrt;
+ __le16 lbat;
+ __le16 lbatm;
+};
+
+struct nvme_copy_range {
+ __le64 rsvd0;
+ __le64 slba;
+ __le16 nlb;
+ __le16 rsvd18;
+ __le32 rsvd20;
+ __le32 eilbrt;
+ __le16 elbat;
+ __le16 elbatm;
+};
+
struct nvme_write_zeroes_cmd {
__u8 opcode;
__u8 flags;
@@ -1449,6 +1485,7 @@ struct nvme_command {
struct nvme_download_firmware dlfw;
struct nvme_format_cmd format;
struct nvme_dsm_cmd dsm;
+ struct nvme_copy_command copy;
struct nvme_write_zeroes_cmd write_zeroes;
struct nvme_zone_mgmt_send_cmd zms;
struct nvme_zone_mgmt_recv_cmd zmr;
--
2.30.0-rc0
^ permalink raw reply related [flat|nested] 272+ messages in thread* [dm-devel] [PATCH v2 06/10] nvme: add copy support
@ 2022-02-07 14:13 ` Nitesh Shetty
0 siblings, 0 replies; 272+ messages in thread
From: Nitesh Shetty @ 2022-02-07 14:13 UTC (permalink / raw)
To: mpatocka
Cc: djwong, linux-nvme, clm, dm-devel, osandov, javier, bvanassche,
linux-scsi, hch, roland, nj.shetty, zach.brown, chaitanyak,
SelvaKumar S, msnitzer, josef, linux-block, dsterba, kbusch,
Frederick.Knight, axboe, tytso, joshi.k, martin.petersen,
arnav.dawn, jack, linux-fsdevel, Javier González, lsf-pc
From: SelvaKumar S <selvakuma.s1@samsung.com>
Add support for Copy command
For device supporting native copy, nvme driver receives read and
write request with BLK_COPY op flags.
For read request the nvme driver populates the payload with source
information.
For write request the driver converts it to nvme copy command using the
source information in the payload and submits to the device.
current design only supports single source range.
Ths design is courtsey Mikulas Patocka's token based copy
trace event support for nvme_copy_cmd.
Set the device copy limits to queue limits. By default copy_offload
is disabled.
Signed-off-by: SelvaKumar S <selvakuma.s1@samsung.com>
Signed-off-by: Kanchan Joshi <joshi.k@samsung.com>
Signed-off-by: Nitesh Shetty <nj.shetty@samsung.com>
Signed-off-by: Javier González <javier.gonz@samsung.com>
---
drivers/nvme/host/core.c | 121 +++++++++++++++++++++++++++++++++++++-
drivers/nvme/host/nvme.h | 7 +++
drivers/nvme/host/pci.c | 9 +++
drivers/nvme/host/trace.c | 19 ++++++
include/linux/nvme.h | 43 +++++++++++++-
5 files changed, 194 insertions(+), 5 deletions(-)
diff --git a/drivers/nvme/host/core.c b/drivers/nvme/host/core.c
index 5e0bfda04bd7..49458001472e 100644
--- a/drivers/nvme/host/core.c
+++ b/drivers/nvme/host/core.c
@@ -821,6 +821,90 @@ static inline void nvme_setup_flush(struct nvme_ns *ns,
cmnd->common.nsid = cpu_to_le32(ns->head->ns_id);
}
+static inline blk_status_t nvme_setup_copy_read(struct nvme_ns *ns, struct request *req)
+{
+ struct bio *bio = req->bio;
+ struct nvme_copy_token *token = bvec_kmap_local(&bio->bi_io_vec[0]);
+
+ memcpy(token->subsys, "nvme", 4);
+ token->ns = ns;
+ token->src_sector = bio->bi_iter.bi_sector;
+ token->sectors = bio->bi_iter.bi_size >> 9;
+
+ return 0;
+}
+
+static inline blk_status_t nvme_setup_copy_write(struct nvme_ns *ns,
+ struct request *req, struct nvme_command *cmnd)
+{
+ struct nvme_ctrl *ctrl = ns->ctrl;
+ struct nvme_copy_range *range = NULL;
+ struct bio *bio = req->bio;
+ struct nvme_copy_token *token = bvec_kmap_local(&bio->bi_io_vec[0]);
+ sector_t src_sector, dst_sector, n_sectors;
+ u64 src_lba, dst_lba, n_lba;
+ unsigned short nr_range = 1;
+ u16 control = 0;
+ u32 dsmgmt = 0;
+
+ if (unlikely(memcmp(token->subsys, "nvme", 4)))
+ return BLK_STS_NOTSUPP;
+ if (unlikely(token->ns != ns))
+ return BLK_STS_NOTSUPP;
+
+ src_sector = token->src_sector;
+ dst_sector = bio->bi_iter.bi_sector;
+ n_sectors = token->sectors;
+ if (WARN_ON(n_sectors != bio->bi_iter.bi_size >> 9))
+ return BLK_STS_NOTSUPP;
+
+ src_lba = nvme_sect_to_lba(ns, src_sector);
+ dst_lba = nvme_sect_to_lba(ns, dst_sector);
+ n_lba = nvme_sect_to_lba(ns, n_sectors);
+
+ if (unlikely(nvme_lba_to_sect(ns, src_lba) != src_sector) ||
+ unlikely(nvme_lba_to_sect(ns, dst_lba) != dst_sector) ||
+ unlikely(nvme_lba_to_sect(ns, n_lba) != n_sectors))
+ return BLK_STS_NOTSUPP;
+
+ if (WARN_ON(!n_lba))
+ return BLK_STS_NOTSUPP;
+
+ if (req->cmd_flags & REQ_FUA)
+ control |= NVME_RW_FUA;
+
+ if (req->cmd_flags & REQ_FAILFAST_DEV)
+ control |= NVME_RW_LR;
+
+ memset(cmnd, 0, sizeof(*cmnd));
+ cmnd->copy.opcode = nvme_cmd_copy;
+ cmnd->copy.nsid = cpu_to_le32(ns->head->ns_id);
+ cmnd->copy.sdlba = cpu_to_le64(blk_rq_pos(req) >> (ns->lba_shift - 9));
+
+ range = kmalloc_array(nr_range, sizeof(*range),
+ GFP_ATOMIC | __GFP_NOWARN);
+ if (!range)
+ return BLK_STS_RESOURCE;
+
+ range[0].slba = cpu_to_le64(src_lba);
+ range[0].nlb = cpu_to_le16(n_lba - 1);
+
+ cmnd->copy.nr_range = 0;
+
+ req->special_vec.bv_page = virt_to_page(range);
+ req->special_vec.bv_offset = offset_in_page(range);
+ req->special_vec.bv_len = sizeof(*range) * nr_range;
+ req->rq_flags |= RQF_SPECIAL_PAYLOAD;
+
+ if (ctrl->nr_streams)
+ nvme_assign_write_stream(ctrl, req, &control, &dsmgmt);
+
+ cmnd->copy.control = cpu_to_le16(control);
+ cmnd->copy.dspec = cpu_to_le32(dsmgmt);
+
+ return BLK_STS_OK;
+}
+
static blk_status_t nvme_setup_discard(struct nvme_ns *ns, struct request *req,
struct nvme_command *cmnd)
{
@@ -1024,10 +1108,16 @@ blk_status_t nvme_setup_cmd(struct nvme_ns *ns, struct request *req)
ret = nvme_setup_discard(ns, req, cmd);
break;
case REQ_OP_READ:
- ret = nvme_setup_rw(ns, req, cmd, nvme_cmd_read);
+ if (unlikely(req->cmd_flags & REQ_COPY))
+ ret = nvme_setup_copy_read(ns, req);
+ else
+ ret = nvme_setup_rw(ns, req, cmd, nvme_cmd_read);
break;
case REQ_OP_WRITE:
- ret = nvme_setup_rw(ns, req, cmd, nvme_cmd_write);
+ if (unlikely(req->cmd_flags & REQ_COPY))
+ ret = nvme_setup_copy_write(ns, req, cmd);
+ else
+ ret = nvme_setup_rw(ns, req, cmd, nvme_cmd_write);
break;
case REQ_OP_ZONE_APPEND:
ret = nvme_setup_rw(ns, req, cmd, nvme_cmd_zone_append);
@@ -1682,6 +1772,31 @@ static void nvme_config_discard(struct gendisk *disk, struct nvme_ns *ns)
blk_queue_max_write_zeroes_sectors(queue, UINT_MAX);
}
+static void nvme_config_copy(struct gendisk *disk, struct nvme_ns *ns,
+ struct nvme_id_ns *id)
+{
+ struct nvme_ctrl *ctrl = ns->ctrl;
+ struct request_queue *queue = disk->queue;
+
+ if (!(ctrl->oncs & NVME_CTRL_ONCS_COPY)) {
+ queue->limits.copy_offload = 0;
+ queue->limits.max_copy_sectors = 0;
+ queue->limits.max_copy_range_sectors = 0;
+ queue->limits.max_copy_nr_ranges = 0;
+ blk_queue_flag_clear(QUEUE_FLAG_COPY, queue);
+ return;
+ }
+
+ /* setting copy limits */
+ blk_queue_flag_test_and_set(QUEUE_FLAG_COPY, queue);
+ queue->limits.copy_offload = 0;
+ queue->limits.max_copy_sectors = le64_to_cpu(id->mcl) *
+ (1 << (ns->lba_shift - 9));
+ queue->limits.max_copy_range_sectors = le32_to_cpu(id->mssrl) *
+ (1 << (ns->lba_shift - 9));
+ queue->limits.max_copy_nr_ranges = id->msrc + 1;
+}
+
static bool nvme_ns_ids_valid(struct nvme_ns_ids *ids)
{
return !uuid_is_null(&ids->uuid) ||
@@ -1864,6 +1979,7 @@ static void nvme_update_disk_info(struct gendisk *disk,
nvme_config_discard(disk, ns);
blk_queue_max_write_zeroes_sectors(disk->queue,
ns->ctrl->max_zeroes_sectors);
+ nvme_config_copy(disk, ns, id);
set_disk_ro(disk, (id->nsattr & NVME_NS_ATTR_RO) ||
test_bit(NVME_NS_FORCE_RO, &ns->flags));
@@ -4721,6 +4837,7 @@ static inline void _nvme_check_size(void)
BUILD_BUG_ON(sizeof(struct nvme_download_firmware) != 64);
BUILD_BUG_ON(sizeof(struct nvme_format_cmd) != 64);
BUILD_BUG_ON(sizeof(struct nvme_dsm_cmd) != 64);
+ BUILD_BUG_ON(sizeof(struct nvme_copy_command) != 64);
BUILD_BUG_ON(sizeof(struct nvme_write_zeroes_cmd) != 64);
BUILD_BUG_ON(sizeof(struct nvme_abort_cmd) != 64);
BUILD_BUG_ON(sizeof(struct nvme_get_log_page_command) != 64);
diff --git a/drivers/nvme/host/nvme.h b/drivers/nvme/host/nvme.h
index a162f6c6da6e..117658a8cf5f 100644
--- a/drivers/nvme/host/nvme.h
+++ b/drivers/nvme/host/nvme.h
@@ -474,6 +474,13 @@ struct nvme_ns {
};
+struct nvme_copy_token {
+ char subsys[4];
+ struct nvme_ns *ns;
+ u64 src_sector;
+ u64 sectors;
+};
+
/* NVMe ns supports metadata actions by the controller (generate/strip) */
static inline bool nvme_ns_has_pi(struct nvme_ns *ns)
{
diff --git a/drivers/nvme/host/pci.c b/drivers/nvme/host/pci.c
index 6a99ed680915..a7b0f129a19d 100644
--- a/drivers/nvme/host/pci.c
+++ b/drivers/nvme/host/pci.c
@@ -916,6 +916,11 @@ static blk_status_t nvme_prep_rq(struct nvme_dev *dev, struct request *req)
if (ret)
return ret;
+ if (unlikely((req->cmd_flags & REQ_COPY) && (req_op(req) == REQ_OP_READ))) {
+ blk_mq_end_request(req, BLK_STS_OK);
+ return BLK_STS_OK;
+ }
+
if (blk_rq_nr_phys_segments(req)) {
ret = nvme_map_data(dev, req, &iod->cmd);
if (ret)
@@ -929,6 +934,7 @@ static blk_status_t nvme_prep_rq(struct nvme_dev *dev, struct request *req)
}
blk_mq_start_request(req);
+
return BLK_STS_OK;
out_unmap_data:
nvme_unmap_data(dev, req);
@@ -962,6 +968,9 @@ static blk_status_t nvme_queue_rq(struct blk_mq_hw_ctx *hctx,
ret = nvme_prep_rq(dev, req);
if (unlikely(ret))
return ret;
+ if (unlikely((req->cmd_flags & REQ_COPY) && (req_op(req) == REQ_OP_READ)))
+ return ret;
+
spin_lock(&nvmeq->sq_lock);
nvme_sq_copy_cmd(nvmeq, &iod->cmd);
nvme_write_sq_db(nvmeq, bd->last);
diff --git a/drivers/nvme/host/trace.c b/drivers/nvme/host/trace.c
index 2a89c5aa0790..ab72bf546a13 100644
--- a/drivers/nvme/host/trace.c
+++ b/drivers/nvme/host/trace.c
@@ -150,6 +150,23 @@ static const char *nvme_trace_read_write(struct trace_seq *p, u8 *cdw10)
return ret;
}
+static const char *nvme_trace_copy(struct trace_seq *p, u8 *cdw10)
+{
+ const char *ret = trace_seq_buffer_ptr(p);
+ u64 slba = get_unaligned_le64(cdw10);
+ u8 nr_range = get_unaligned_le16(cdw10 + 8);
+ u16 control = get_unaligned_le16(cdw10 + 10);
+ u32 dsmgmt = get_unaligned_le32(cdw10 + 12);
+ u32 reftag = get_unaligned_le32(cdw10 + 16);
+
+ trace_seq_printf(p,
+ "slba=%llu, nr_range=%u, ctrl=0x%x, dsmgmt=%u, reftag=%u",
+ slba, nr_range, control, dsmgmt, reftag);
+ trace_seq_putc(p, 0);
+
+ return ret;
+}
+
static const char *nvme_trace_dsm(struct trace_seq *p, u8 *cdw10)
{
const char *ret = trace_seq_buffer_ptr(p);
@@ -243,6 +260,8 @@ const char *nvme_trace_parse_nvm_cmd(struct trace_seq *p,
return nvme_trace_zone_mgmt_send(p, cdw10);
case nvme_cmd_zone_mgmt_recv:
return nvme_trace_zone_mgmt_recv(p, cdw10);
+ case nvme_cmd_copy:
+ return nvme_trace_copy(p, cdw10);
default:
return nvme_trace_common(p, cdw10);
}
diff --git a/include/linux/nvme.h b/include/linux/nvme.h
index 855dd9b3e84b..7ed966058f4c 100644
--- a/include/linux/nvme.h
+++ b/include/linux/nvme.h
@@ -309,7 +309,7 @@ struct nvme_id_ctrl {
__u8 nvscc;
__u8 nwpc;
__le16 acwu;
- __u8 rsvd534[2];
+ __le16 ocfs;
__le32 sgls;
__le32 mnan;
__u8 rsvd544[224];
@@ -335,6 +335,7 @@ enum {
NVME_CTRL_ONCS_WRITE_ZEROES = 1 << 3,
NVME_CTRL_ONCS_RESERVATIONS = 1 << 5,
NVME_CTRL_ONCS_TIMESTAMP = 1 << 6,
+ NVME_CTRL_ONCS_COPY = 1 << 8,
NVME_CTRL_VWC_PRESENT = 1 << 0,
NVME_CTRL_OACS_SEC_SUPP = 1 << 0,
NVME_CTRL_OACS_DIRECTIVES = 1 << 5,
@@ -383,7 +384,10 @@ struct nvme_id_ns {
__le16 npdg;
__le16 npda;
__le16 nows;
- __u8 rsvd74[18];
+ __le16 mssrl;
+ __le32 mcl;
+ __u8 msrc;
+ __u8 rsvd91[11];
__le32 anagrpid;
__u8 rsvd96[3];
__u8 nsattr;
@@ -704,6 +708,7 @@ enum nvme_opcode {
nvme_cmd_resv_report = 0x0e,
nvme_cmd_resv_acquire = 0x11,
nvme_cmd_resv_release = 0x15,
+ nvme_cmd_copy = 0x19,
nvme_cmd_zone_mgmt_send = 0x79,
nvme_cmd_zone_mgmt_recv = 0x7a,
nvme_cmd_zone_append = 0x7d,
@@ -725,7 +730,8 @@ enum nvme_opcode {
nvme_opcode_name(nvme_cmd_resv_release), \
nvme_opcode_name(nvme_cmd_zone_mgmt_send), \
nvme_opcode_name(nvme_cmd_zone_mgmt_recv), \
- nvme_opcode_name(nvme_cmd_zone_append))
+ nvme_opcode_name(nvme_cmd_zone_append), \
+ nvme_opcode_name(nvme_cmd_copy))
@@ -898,6 +904,36 @@ struct nvme_dsm_range {
__le64 slba;
};
+struct nvme_copy_command {
+ __u8 opcode;
+ __u8 flags;
+ __u16 command_id;
+ __le32 nsid;
+ __u64 rsvd2;
+ __le64 metadata;
+ union nvme_data_ptr dptr;
+ __le64 sdlba;
+ __u8 nr_range;
+ __u8 rsvd12;
+ __le16 control;
+ __le16 rsvd13;
+ __le16 dspec;
+ __le32 ilbrt;
+ __le16 lbat;
+ __le16 lbatm;
+};
+
+struct nvme_copy_range {
+ __le64 rsvd0;
+ __le64 slba;
+ __le16 nlb;
+ __le16 rsvd18;
+ __le32 rsvd20;
+ __le32 eilbrt;
+ __le16 elbat;
+ __le16 elbatm;
+};
+
struct nvme_write_zeroes_cmd {
__u8 opcode;
__u8 flags;
@@ -1449,6 +1485,7 @@ struct nvme_command {
struct nvme_download_firmware dlfw;
struct nvme_format_cmd format;
struct nvme_dsm_cmd dsm;
+ struct nvme_copy_command copy;
struct nvme_write_zeroes_cmd write_zeroes;
struct nvme_zone_mgmt_send_cmd zms;
struct nvme_zone_mgmt_recv_cmd zmr;
--
2.30.0-rc0
--
dm-devel mailing list
dm-devel@redhat.com
https://listman.redhat.com/mailman/listinfo/dm-devel
^ permalink raw reply related [flat|nested] 272+ messages in thread* Re: [PATCH v2 06/10] nvme: add copy support
2022-02-07 14:13 ` [dm-devel] " Nitesh Shetty
(?)
@ 2022-02-10 7:08 ` kernel test robot
-1 siblings, 0 replies; 272+ messages in thread
From: kernel test robot @ 2022-02-10 7:08 UTC (permalink / raw)
To: Nitesh Shetty, mpatocka
Cc: kbuild-all, javier, chaitanyak, linux-block, linux-scsi,
dm-devel, linux-nvme, linux-fsdevel, axboe, msnitzer, bvanassche,
martin.petersen, roland, hare, kbusch, hch, Frederick.Knight,
zach.brown, osandov, lsf-pc, djwong, josef, clm, dsterba, tytso,
jack, joshi.k, arnav.dawn, nj.shetty, SelvaKumar S
Hi Nitesh,
Thank you for the patch! Perhaps something to improve:
[auto build test WARNING on axboe-block/for-next]
[also build test WARNING on linus/master v5.17-rc3 next-20220209]
[cannot apply to device-mapper-dm/for-next]
[If your patch is applied to the wrong git tree, kindly drop us a note.
And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch]
url: https://github.com/0day-ci/linux/commits/Nitesh-Shetty/block-make-bio_map_kern-non-static/20220207-231407
base: https://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux-block.git for-next
config: arm64-randconfig-s032-20220207 (https://download.01.org/0day-ci/archive/20220210/202202101447.DEcXWmHU-lkp@intel.com/config)
compiler: aarch64-linux-gcc (GCC) 11.2.0
reproduce:
wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
chmod +x ~/bin/make.cross
# apt-get install sparse
# sparse version: v0.6.4-dirty
# https://github.com/0day-ci/linux/commit/22cbc1d3df11aaadd02b27ce5dcb702f9a8f4272
git remote add linux-review https://github.com/0day-ci/linux
git fetch --no-tags linux-review Nitesh-Shetty/block-make-bio_map_kern-non-static/20220207-231407
git checkout 22cbc1d3df11aaadd02b27ce5dcb702f9a8f4272
# save the config file to linux build tree
mkdir build_dir
COMPILER_INSTALL_PATH=$HOME/0day COMPILER=gcc-11.2.0 make.cross C=1 CF='-fdiagnostic-prefix -D__CHECK_ENDIAN__' O=build_dir ARCH=arm64 SHELL=/bin/bash drivers/nvme/host/ drivers/nvme/target/
If you fix the issue, kindly add following tag as appropriate
Reported-by: kernel test robot <lkp@intel.com>
sparse warnings: (new ones prefixed by >>)
>> drivers/nvme/host/core.c:1793:42: sparse: sparse: cast to restricted __le64
drivers/nvme/host/core.c:1793:42: sparse: sparse: cast from restricted __le32
>> drivers/nvme/host/core.c:1795:48: sparse: sparse: cast to restricted __le32
>> drivers/nvme/host/core.c:1795:48: sparse: sparse: cast from restricted __le16
>> drivers/nvme/host/core.c:903:26: sparse: sparse: incorrect type in assignment (different base types) @@ expected restricted __le16 [usertype] dspec @@ got restricted __le32 [usertype] @@
drivers/nvme/host/core.c:903:26: sparse: expected restricted __le16 [usertype] dspec
drivers/nvme/host/core.c:903:26: sparse: got restricted __le32 [usertype]
vim +1793 drivers/nvme/host/core.c
1774
1775 static void nvme_config_copy(struct gendisk *disk, struct nvme_ns *ns,
1776 struct nvme_id_ns *id)
1777 {
1778 struct nvme_ctrl *ctrl = ns->ctrl;
1779 struct request_queue *queue = disk->queue;
1780
1781 if (!(ctrl->oncs & NVME_CTRL_ONCS_COPY)) {
1782 queue->limits.copy_offload = 0;
1783 queue->limits.max_copy_sectors = 0;
1784 queue->limits.max_copy_range_sectors = 0;
1785 queue->limits.max_copy_nr_ranges = 0;
1786 blk_queue_flag_clear(QUEUE_FLAG_COPY, queue);
1787 return;
1788 }
1789
1790 /* setting copy limits */
1791 blk_queue_flag_test_and_set(QUEUE_FLAG_COPY, queue);
1792 queue->limits.copy_offload = 0;
> 1793 queue->limits.max_copy_sectors = le64_to_cpu(id->mcl) *
1794 (1 << (ns->lba_shift - 9));
> 1795 queue->limits.max_copy_range_sectors = le32_to_cpu(id->mssrl) *
1796 (1 << (ns->lba_shift - 9));
1797 queue->limits.max_copy_nr_ranges = id->msrc + 1;
1798 }
1799
---
0-DAY CI Kernel Test Service, Intel Corporation
https://lists.01.org/hyperkitty/list/kbuild-all@lists.01.org
^ permalink raw reply [flat|nested] 272+ messages in thread* Re: [PATCH v2 06/10] nvme: add copy support
@ 2022-02-10 7:08 ` kernel test robot
0 siblings, 0 replies; 272+ messages in thread
From: kernel test robot @ 2022-02-10 7:08 UTC (permalink / raw)
To: kbuild-all
[-- Attachment #1: Type: text/plain, Size: 3669 bytes --]
Hi Nitesh,
Thank you for the patch! Perhaps something to improve:
[auto build test WARNING on axboe-block/for-next]
[also build test WARNING on linus/master v5.17-rc3 next-20220209]
[cannot apply to device-mapper-dm/for-next]
[If your patch is applied to the wrong git tree, kindly drop us a note.
And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch]
url: https://github.com/0day-ci/linux/commits/Nitesh-Shetty/block-make-bio_map_kern-non-static/20220207-231407
base: https://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux-block.git for-next
config: arm64-randconfig-s032-20220207 (https://download.01.org/0day-ci/archive/20220210/202202101447.DEcXWmHU-lkp(a)intel.com/config)
compiler: aarch64-linux-gcc (GCC) 11.2.0
reproduce:
wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
chmod +x ~/bin/make.cross
# apt-get install sparse
# sparse version: v0.6.4-dirty
# https://github.com/0day-ci/linux/commit/22cbc1d3df11aaadd02b27ce5dcb702f9a8f4272
git remote add linux-review https://github.com/0day-ci/linux
git fetch --no-tags linux-review Nitesh-Shetty/block-make-bio_map_kern-non-static/20220207-231407
git checkout 22cbc1d3df11aaadd02b27ce5dcb702f9a8f4272
# save the config file to linux build tree
mkdir build_dir
COMPILER_INSTALL_PATH=$HOME/0day COMPILER=gcc-11.2.0 make.cross C=1 CF='-fdiagnostic-prefix -D__CHECK_ENDIAN__' O=build_dir ARCH=arm64 SHELL=/bin/bash drivers/nvme/host/ drivers/nvme/target/
If you fix the issue, kindly add following tag as appropriate
Reported-by: kernel test robot <lkp@intel.com>
sparse warnings: (new ones prefixed by >>)
>> drivers/nvme/host/core.c:1793:42: sparse: sparse: cast to restricted __le64
drivers/nvme/host/core.c:1793:42: sparse: sparse: cast from restricted __le32
>> drivers/nvme/host/core.c:1795:48: sparse: sparse: cast to restricted __le32
>> drivers/nvme/host/core.c:1795:48: sparse: sparse: cast from restricted __le16
>> drivers/nvme/host/core.c:903:26: sparse: sparse: incorrect type in assignment (different base types) @@ expected restricted __le16 [usertype] dspec @@ got restricted __le32 [usertype] @@
drivers/nvme/host/core.c:903:26: sparse: expected restricted __le16 [usertype] dspec
drivers/nvme/host/core.c:903:26: sparse: got restricted __le32 [usertype]
vim +1793 drivers/nvme/host/core.c
1774
1775 static void nvme_config_copy(struct gendisk *disk, struct nvme_ns *ns,
1776 struct nvme_id_ns *id)
1777 {
1778 struct nvme_ctrl *ctrl = ns->ctrl;
1779 struct request_queue *queue = disk->queue;
1780
1781 if (!(ctrl->oncs & NVME_CTRL_ONCS_COPY)) {
1782 queue->limits.copy_offload = 0;
1783 queue->limits.max_copy_sectors = 0;
1784 queue->limits.max_copy_range_sectors = 0;
1785 queue->limits.max_copy_nr_ranges = 0;
1786 blk_queue_flag_clear(QUEUE_FLAG_COPY, queue);
1787 return;
1788 }
1789
1790 /* setting copy limits */
1791 blk_queue_flag_test_and_set(QUEUE_FLAG_COPY, queue);
1792 queue->limits.copy_offload = 0;
> 1793 queue->limits.max_copy_sectors = le64_to_cpu(id->mcl) *
1794 (1 << (ns->lba_shift - 9));
> 1795 queue->limits.max_copy_range_sectors = le32_to_cpu(id->mssrl) *
1796 (1 << (ns->lba_shift - 9));
1797 queue->limits.max_copy_nr_ranges = id->msrc + 1;
1798 }
1799
---
0-DAY CI Kernel Test Service, Intel Corporation
https://lists.01.org/hyperkitty/list/kbuild-all(a)lists.01.org
^ permalink raw reply [flat|nested] 272+ messages in thread* Re: [dm-devel] [PATCH v2 06/10] nvme: add copy support
@ 2022-02-10 7:08 ` kernel test robot
0 siblings, 0 replies; 272+ messages in thread
From: kernel test robot @ 2022-02-10 7:08 UTC (permalink / raw)
To: Nitesh Shetty, mpatocka
Cc: djwong, linux-nvme, clm, dm-devel, osandov, javier, bvanassche,
linux-scsi, hch, roland, nj.shetty, zach.brown, chaitanyak,
SelvaKumar S, msnitzer, josef, linux-block, dsterba, kbusch,
tytso, Frederick.Knight, axboe, kbuild-all, joshi.k,
martin.petersen, arnav.dawn, jack, linux-fsdevel, lsf-pc
Hi Nitesh,
Thank you for the patch! Perhaps something to improve:
[auto build test WARNING on axboe-block/for-next]
[also build test WARNING on linus/master v5.17-rc3 next-20220209]
[cannot apply to device-mapper-dm/for-next]
[If your patch is applied to the wrong git tree, kindly drop us a note.
And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch]
url: https://github.com/0day-ci/linux/commits/Nitesh-Shetty/block-make-bio_map_kern-non-static/20220207-231407
base: https://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux-block.git for-next
config: arm64-randconfig-s032-20220207 (https://download.01.org/0day-ci/archive/20220210/202202101447.DEcXWmHU-lkp@intel.com/config)
compiler: aarch64-linux-gcc (GCC) 11.2.0
reproduce:
wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
chmod +x ~/bin/make.cross
# apt-get install sparse
# sparse version: v0.6.4-dirty
# https://github.com/0day-ci/linux/commit/22cbc1d3df11aaadd02b27ce5dcb702f9a8f4272
git remote add linux-review https://github.com/0day-ci/linux
git fetch --no-tags linux-review Nitesh-Shetty/block-make-bio_map_kern-non-static/20220207-231407
git checkout 22cbc1d3df11aaadd02b27ce5dcb702f9a8f4272
# save the config file to linux build tree
mkdir build_dir
COMPILER_INSTALL_PATH=$HOME/0day COMPILER=gcc-11.2.0 make.cross C=1 CF='-fdiagnostic-prefix -D__CHECK_ENDIAN__' O=build_dir ARCH=arm64 SHELL=/bin/bash drivers/nvme/host/ drivers/nvme/target/
If you fix the issue, kindly add following tag as appropriate
Reported-by: kernel test robot <lkp@intel.com>
sparse warnings: (new ones prefixed by >>)
>> drivers/nvme/host/core.c:1793:42: sparse: sparse: cast to restricted __le64
drivers/nvme/host/core.c:1793:42: sparse: sparse: cast from restricted __le32
>> drivers/nvme/host/core.c:1795:48: sparse: sparse: cast to restricted __le32
>> drivers/nvme/host/core.c:1795:48: sparse: sparse: cast from restricted __le16
>> drivers/nvme/host/core.c:903:26: sparse: sparse: incorrect type in assignment (different base types) @@ expected restricted __le16 [usertype] dspec @@ got restricted __le32 [usertype] @@
drivers/nvme/host/core.c:903:26: sparse: expected restricted __le16 [usertype] dspec
drivers/nvme/host/core.c:903:26: sparse: got restricted __le32 [usertype]
vim +1793 drivers/nvme/host/core.c
1774
1775 static void nvme_config_copy(struct gendisk *disk, struct nvme_ns *ns,
1776 struct nvme_id_ns *id)
1777 {
1778 struct nvme_ctrl *ctrl = ns->ctrl;
1779 struct request_queue *queue = disk->queue;
1780
1781 if (!(ctrl->oncs & NVME_CTRL_ONCS_COPY)) {
1782 queue->limits.copy_offload = 0;
1783 queue->limits.max_copy_sectors = 0;
1784 queue->limits.max_copy_range_sectors = 0;
1785 queue->limits.max_copy_nr_ranges = 0;
1786 blk_queue_flag_clear(QUEUE_FLAG_COPY, queue);
1787 return;
1788 }
1789
1790 /* setting copy limits */
1791 blk_queue_flag_test_and_set(QUEUE_FLAG_COPY, queue);
1792 queue->limits.copy_offload = 0;
> 1793 queue->limits.max_copy_sectors = le64_to_cpu(id->mcl) *
1794 (1 << (ns->lba_shift - 9));
> 1795 queue->limits.max_copy_range_sectors = le32_to_cpu(id->mssrl) *
1796 (1 << (ns->lba_shift - 9));
1797 queue->limits.max_copy_nr_ranges = id->msrc + 1;
1798 }
1799
---
0-DAY CI Kernel Test Service, Intel Corporation
https://lists.01.org/hyperkitty/list/kbuild-all@lists.01.org
--
dm-devel mailing list
dm-devel@redhat.com
https://listman.redhat.com/mailman/listinfo/dm-devel
^ permalink raw reply [flat|nested] 272+ messages in thread
[parent not found: <CGME20220207141942epcas5p4bda894a5833513c9211dcecc7928a951@epcas5p4.samsung.com>]
* [PATCH v2 07/10] nvmet: add copy command support for bdev and file ns
[not found] ` <CGME20220207141942epcas5p4bda894a5833513c9211dcecc7928a951@epcas5p4.samsung.com>
@ 2022-02-07 14:13 ` Nitesh Shetty
0 siblings, 0 replies; 272+ messages in thread
From: Nitesh Shetty @ 2022-02-07 14:13 UTC (permalink / raw)
To: mpatocka
Cc: javier, chaitanyak, linux-block, linux-scsi, dm-devel,
linux-nvme, linux-fsdevel, axboe, msnitzer, bvanassche,
martin.petersen, roland, hare, kbusch, hch, Frederick.Knight,
zach.brown, osandov, lsf-pc, djwong, josef, clm, dsterba, tytso,
jack, joshi.k, arnav.dawn, nj.shetty
From: Arnav Dawn <arnav.dawn@samsung.com>
Add support for handling target command on target.
For bdev-ns we call into blkdev_issue_copy, which the block layer
completes by a offloaded copy request to backend bdev or by emulating the
request.
For file-ns we call vfs_copy_file_range to service our request.
Currently target always shows copy capability by setting
NVME_CTRL_ONCS_COPY in controller ONCS.
Signed-off-by: Arnav Dawn <arnav.dawn@samsung.com>
Signed-off-by: Nitesh Shetty <nj.shetty@samsung.com>
---
drivers/nvme/target/admin-cmd.c | 8 +++-
drivers/nvme/target/io-cmd-bdev.c | 66 +++++++++++++++++++++++++++++++
drivers/nvme/target/io-cmd-file.c | 48 ++++++++++++++++++++++
3 files changed, 120 insertions(+), 2 deletions(-)
diff --git a/drivers/nvme/target/admin-cmd.c b/drivers/nvme/target/admin-cmd.c
index 6fb24746de06..cbb967344d1d 100644
--- a/drivers/nvme/target/admin-cmd.c
+++ b/drivers/nvme/target/admin-cmd.c
@@ -431,8 +431,7 @@ static void nvmet_execute_identify_ctrl(struct nvmet_req *req)
id->nn = cpu_to_le32(NVMET_MAX_NAMESPACES);
id->mnan = cpu_to_le32(NVMET_MAX_NAMESPACES);
id->oncs = cpu_to_le16(NVME_CTRL_ONCS_DSM |
- NVME_CTRL_ONCS_WRITE_ZEROES);
-
+ NVME_CTRL_ONCS_WRITE_ZEROES | NVME_CTRL_ONCS_COPY);
/* XXX: don't report vwc if the underlying device is write through */
id->vwc = NVME_CTRL_VWC_PRESENT;
@@ -530,6 +529,11 @@ static void nvmet_execute_identify_ns(struct nvmet_req *req)
if (req->ns->bdev)
nvmet_bdev_set_limits(req->ns->bdev, id);
+ else {
+ id->msrc = to0based(BIO_MAX_VECS);
+ id->mssrl = cpu_to_le32(BIO_MAX_VECS << (PAGE_SHIFT - SECTOR_SHIFT));
+ id->mcl = cpu_to_le64(le32_to_cpu(id->mssrl) * BIO_MAX_VECS);
+ }
/*
* We just provide a single LBA format that matches what the
diff --git a/drivers/nvme/target/io-cmd-bdev.c b/drivers/nvme/target/io-cmd-bdev.c
index 95c2bbb0b2f5..9b403f394f21 100644
--- a/drivers/nvme/target/io-cmd-bdev.c
+++ b/drivers/nvme/target/io-cmd-bdev.c
@@ -46,6 +46,30 @@ void nvmet_bdev_set_limits(struct block_device *bdev, struct nvme_id_ns *id)
id->npda = id->npdg;
/* NOWS = Namespace Optimal Write Size */
id->nows = to0based(ql->io_opt / ql->logical_block_size);
+
+ /*Copy limits*/
+ if (ql->max_copy_sectors) {
+ id->mcl = cpu_to_le64((ql->max_copy_sectors << 9) / ql->logical_block_size);
+ id->mssrl = cpu_to_le32((ql->max_copy_range_sectors << 9) /
+ ql->logical_block_size);
+ id->msrc = to0based(ql->max_copy_nr_ranges);
+ } else {
+ if (ql->zoned == BLK_ZONED_NONE) {
+ id->msrc = to0based(BIO_MAX_VECS);
+ id->mssrl = cpu_to_le32(
+ (BIO_MAX_VECS << PAGE_SHIFT) / ql->logical_block_size);
+ id->mcl = cpu_to_le64(le32_to_cpu(id->mssrl) * BIO_MAX_VECS);
+#ifdef CONFIG_BLK_DEV_ZONED
+ } else {
+ /* TODO: get right values for zoned device */
+ id->msrc = to0based(BIO_MAX_VECS);
+ id->mssrl = cpu_to_le32(min((BIO_MAX_VECS << PAGE_SHIFT),
+ ql->chunk_sectors) / ql->logical_block_size);
+ id->mcl = cpu_to_le64(min(le32_to_cpu(id->mssrl) * BIO_MAX_VECS,
+ ql->chunk_sectors));
+#endif
+ }
+ }
}
void nvmet_bdev_ns_disable(struct nvmet_ns *ns)
@@ -433,6 +457,44 @@ static void nvmet_bdev_execute_write_zeroes(struct nvmet_req *req)
}
}
+static void nvmet_bdev_execute_copy(struct nvmet_req *req)
+{
+ struct nvme_copy_range range;
+ struct range_entry *rlist;
+ struct nvme_command *cmnd = req->cmd;
+ sector_t dest, dest_off = 0;
+ int ret, id, nr_range;
+
+ nr_range = cmnd->copy.nr_range + 1;
+ dest = le64_to_cpu(cmnd->copy.sdlba) << req->ns->blksize_shift;
+ rlist = kmalloc_array(nr_range, sizeof(*rlist), GFP_KERNEL);
+
+ for (id = 0 ; id < nr_range; id++) {
+ ret = nvmet_copy_from_sgl(req, id * sizeof(range), &range, sizeof(range));
+ if (ret)
+ goto out;
+
+ rlist[id].dst = dest + dest_off;
+ rlist[id].src = le64_to_cpu(range.slba) << req->ns->blksize_shift;
+ rlist[id].len = (le16_to_cpu(range.nlb) + 1) << req->ns->blksize_shift;
+ rlist[id].comp_len = 0;
+ dest_off += rlist[id].len;
+ }
+ ret = blkdev_issue_copy(req->ns->bdev, nr_range, rlist, req->ns->bdev, GFP_KERNEL,
+ 0);
+ if (ret) {
+ for (id = 0 ; id < nr_range; id++) {
+ if (rlist[id].len != rlist[id].comp_len) {
+ req->cqe->result.u32 = cpu_to_le32(id);
+ break;
+ }
+ }
+ }
+out:
+ kfree(rlist);
+ nvmet_req_complete(req, errno_to_nvme_status(req, ret));
+}
+
u16 nvmet_bdev_parse_io_cmd(struct nvmet_req *req)
{
switch (req->cmd->common.opcode) {
@@ -451,6 +513,10 @@ u16 nvmet_bdev_parse_io_cmd(struct nvmet_req *req)
case nvme_cmd_write_zeroes:
req->execute = nvmet_bdev_execute_write_zeroes;
return 0;
+ case nvme_cmd_copy:
+ req->execute = nvmet_bdev_execute_copy;
+ return 0;
+
default:
return nvmet_report_invalid_opcode(req);
}
diff --git a/drivers/nvme/target/io-cmd-file.c b/drivers/nvme/target/io-cmd-file.c
index 6be6e59d273b..665baa221a43 100644
--- a/drivers/nvme/target/io-cmd-file.c
+++ b/drivers/nvme/target/io-cmd-file.c
@@ -347,6 +347,46 @@ static void nvmet_file_dsm_work(struct work_struct *w)
}
}
+static void nvmet_file_copy_work(struct work_struct *w)
+{
+ struct nvmet_req *req = container_of(w, struct nvmet_req, f.work);
+ int nr_range;
+ loff_t pos;
+ struct nvme_command *cmnd = req->cmd;
+ int ret = 0, len, src, id;
+
+ nr_range = cmnd->copy.nr_range + 1;
+ pos = le64_to_cpu(req->cmd->copy.sdlba) << req->ns->blksize_shift;
+ if (unlikely(pos + req->transfer_len > req->ns->size)) {
+ nvmet_req_complete(req, errno_to_nvme_status(req, -ENOSPC));
+ return;
+ }
+
+ for (id = 0 ; id < nr_range; id++) {
+ struct nvme_copy_range range;
+
+ ret = nvmet_copy_from_sgl(req, id * sizeof(range), &range,
+ sizeof(range));
+ if (ret)
+ goto out;
+
+ len = (le16_to_cpu(range.nlb) + 1) << (req->ns->blksize_shift);
+ src = (le64_to_cpu(range.slba) << (req->ns->blksize_shift));
+ ret = vfs_copy_file_range(req->ns->file, src, req->ns->file, pos, len, 0);
+out:
+ if (ret != len) {
+ pos += ret;
+ req->cqe->result.u32 = cpu_to_le32(id);
+ nvmet_req_complete(req, ret < 0 ? errno_to_nvme_status(req, ret) :
+ errno_to_nvme_status(req, -EIO));
+ return;
+
+ } else
+ pos += len;
+}
+ nvmet_req_complete(req, ret);
+
+}
static void nvmet_file_execute_dsm(struct nvmet_req *req)
{
if (!nvmet_check_data_len_lte(req, nvmet_dsm_len(req)))
@@ -355,6 +395,11 @@ static void nvmet_file_execute_dsm(struct nvmet_req *req)
schedule_work(&req->f.work);
}
+static void nvmet_file_execute_copy(struct nvmet_req *req)
+{
+ INIT_WORK(&req->f.work, nvmet_file_copy_work);
+ schedule_work(&req->f.work);
+}
static void nvmet_file_write_zeroes_work(struct work_struct *w)
{
struct nvmet_req *req = container_of(w, struct nvmet_req, f.work);
@@ -401,6 +446,9 @@ u16 nvmet_file_parse_io_cmd(struct nvmet_req *req)
case nvme_cmd_write_zeroes:
req->execute = nvmet_file_execute_write_zeroes;
return 0;
+ case nvme_cmd_copy:
+ req->execute = nvmet_file_execute_copy;
+ return 0;
default:
return nvmet_report_invalid_opcode(req);
}
--
2.30.0-rc0
^ permalink raw reply related [flat|nested] 272+ messages in thread* [dm-devel] [PATCH v2 07/10] nvmet: add copy command support for bdev and file ns
@ 2022-02-07 14:13 ` Nitesh Shetty
0 siblings, 0 replies; 272+ messages in thread
From: Nitesh Shetty @ 2022-02-07 14:13 UTC (permalink / raw)
To: mpatocka
Cc: djwong, linux-nvme, clm, dm-devel, osandov, javier, bvanassche,
linux-scsi, hch, roland, nj.shetty, zach.brown, chaitanyak,
msnitzer, josef, linux-block, dsterba, kbusch, Frederick.Knight,
axboe, tytso, joshi.k, martin.petersen, arnav.dawn, jack,
linux-fsdevel, lsf-pc
From: Arnav Dawn <arnav.dawn@samsung.com>
Add support for handling target command on target.
For bdev-ns we call into blkdev_issue_copy, which the block layer
completes by a offloaded copy request to backend bdev or by emulating the
request.
For file-ns we call vfs_copy_file_range to service our request.
Currently target always shows copy capability by setting
NVME_CTRL_ONCS_COPY in controller ONCS.
Signed-off-by: Arnav Dawn <arnav.dawn@samsung.com>
Signed-off-by: Nitesh Shetty <nj.shetty@samsung.com>
---
drivers/nvme/target/admin-cmd.c | 8 +++-
drivers/nvme/target/io-cmd-bdev.c | 66 +++++++++++++++++++++++++++++++
drivers/nvme/target/io-cmd-file.c | 48 ++++++++++++++++++++++
3 files changed, 120 insertions(+), 2 deletions(-)
diff --git a/drivers/nvme/target/admin-cmd.c b/drivers/nvme/target/admin-cmd.c
index 6fb24746de06..cbb967344d1d 100644
--- a/drivers/nvme/target/admin-cmd.c
+++ b/drivers/nvme/target/admin-cmd.c
@@ -431,8 +431,7 @@ static void nvmet_execute_identify_ctrl(struct nvmet_req *req)
id->nn = cpu_to_le32(NVMET_MAX_NAMESPACES);
id->mnan = cpu_to_le32(NVMET_MAX_NAMESPACES);
id->oncs = cpu_to_le16(NVME_CTRL_ONCS_DSM |
- NVME_CTRL_ONCS_WRITE_ZEROES);
-
+ NVME_CTRL_ONCS_WRITE_ZEROES | NVME_CTRL_ONCS_COPY);
/* XXX: don't report vwc if the underlying device is write through */
id->vwc = NVME_CTRL_VWC_PRESENT;
@@ -530,6 +529,11 @@ static void nvmet_execute_identify_ns(struct nvmet_req *req)
if (req->ns->bdev)
nvmet_bdev_set_limits(req->ns->bdev, id);
+ else {
+ id->msrc = to0based(BIO_MAX_VECS);
+ id->mssrl = cpu_to_le32(BIO_MAX_VECS << (PAGE_SHIFT - SECTOR_SHIFT));
+ id->mcl = cpu_to_le64(le32_to_cpu(id->mssrl) * BIO_MAX_VECS);
+ }
/*
* We just provide a single LBA format that matches what the
diff --git a/drivers/nvme/target/io-cmd-bdev.c b/drivers/nvme/target/io-cmd-bdev.c
index 95c2bbb0b2f5..9b403f394f21 100644
--- a/drivers/nvme/target/io-cmd-bdev.c
+++ b/drivers/nvme/target/io-cmd-bdev.c
@@ -46,6 +46,30 @@ void nvmet_bdev_set_limits(struct block_device *bdev, struct nvme_id_ns *id)
id->npda = id->npdg;
/* NOWS = Namespace Optimal Write Size */
id->nows = to0based(ql->io_opt / ql->logical_block_size);
+
+ /*Copy limits*/
+ if (ql->max_copy_sectors) {
+ id->mcl = cpu_to_le64((ql->max_copy_sectors << 9) / ql->logical_block_size);
+ id->mssrl = cpu_to_le32((ql->max_copy_range_sectors << 9) /
+ ql->logical_block_size);
+ id->msrc = to0based(ql->max_copy_nr_ranges);
+ } else {
+ if (ql->zoned == BLK_ZONED_NONE) {
+ id->msrc = to0based(BIO_MAX_VECS);
+ id->mssrl = cpu_to_le32(
+ (BIO_MAX_VECS << PAGE_SHIFT) / ql->logical_block_size);
+ id->mcl = cpu_to_le64(le32_to_cpu(id->mssrl) * BIO_MAX_VECS);
+#ifdef CONFIG_BLK_DEV_ZONED
+ } else {
+ /* TODO: get right values for zoned device */
+ id->msrc = to0based(BIO_MAX_VECS);
+ id->mssrl = cpu_to_le32(min((BIO_MAX_VECS << PAGE_SHIFT),
+ ql->chunk_sectors) / ql->logical_block_size);
+ id->mcl = cpu_to_le64(min(le32_to_cpu(id->mssrl) * BIO_MAX_VECS,
+ ql->chunk_sectors));
+#endif
+ }
+ }
}
void nvmet_bdev_ns_disable(struct nvmet_ns *ns)
@@ -433,6 +457,44 @@ static void nvmet_bdev_execute_write_zeroes(struct nvmet_req *req)
}
}
+static void nvmet_bdev_execute_copy(struct nvmet_req *req)
+{
+ struct nvme_copy_range range;
+ struct range_entry *rlist;
+ struct nvme_command *cmnd = req->cmd;
+ sector_t dest, dest_off = 0;
+ int ret, id, nr_range;
+
+ nr_range = cmnd->copy.nr_range + 1;
+ dest = le64_to_cpu(cmnd->copy.sdlba) << req->ns->blksize_shift;
+ rlist = kmalloc_array(nr_range, sizeof(*rlist), GFP_KERNEL);
+
+ for (id = 0 ; id < nr_range; id++) {
+ ret = nvmet_copy_from_sgl(req, id * sizeof(range), &range, sizeof(range));
+ if (ret)
+ goto out;
+
+ rlist[id].dst = dest + dest_off;
+ rlist[id].src = le64_to_cpu(range.slba) << req->ns->blksize_shift;
+ rlist[id].len = (le16_to_cpu(range.nlb) + 1) << req->ns->blksize_shift;
+ rlist[id].comp_len = 0;
+ dest_off += rlist[id].len;
+ }
+ ret = blkdev_issue_copy(req->ns->bdev, nr_range, rlist, req->ns->bdev, GFP_KERNEL,
+ 0);
+ if (ret) {
+ for (id = 0 ; id < nr_range; id++) {
+ if (rlist[id].len != rlist[id].comp_len) {
+ req->cqe->result.u32 = cpu_to_le32(id);
+ break;
+ }
+ }
+ }
+out:
+ kfree(rlist);
+ nvmet_req_complete(req, errno_to_nvme_status(req, ret));
+}
+
u16 nvmet_bdev_parse_io_cmd(struct nvmet_req *req)
{
switch (req->cmd->common.opcode) {
@@ -451,6 +513,10 @@ u16 nvmet_bdev_parse_io_cmd(struct nvmet_req *req)
case nvme_cmd_write_zeroes:
req->execute = nvmet_bdev_execute_write_zeroes;
return 0;
+ case nvme_cmd_copy:
+ req->execute = nvmet_bdev_execute_copy;
+ return 0;
+
default:
return nvmet_report_invalid_opcode(req);
}
diff --git a/drivers/nvme/target/io-cmd-file.c b/drivers/nvme/target/io-cmd-file.c
index 6be6e59d273b..665baa221a43 100644
--- a/drivers/nvme/target/io-cmd-file.c
+++ b/drivers/nvme/target/io-cmd-file.c
@@ -347,6 +347,46 @@ static void nvmet_file_dsm_work(struct work_struct *w)
}
}
+static void nvmet_file_copy_work(struct work_struct *w)
+{
+ struct nvmet_req *req = container_of(w, struct nvmet_req, f.work);
+ int nr_range;
+ loff_t pos;
+ struct nvme_command *cmnd = req->cmd;
+ int ret = 0, len, src, id;
+
+ nr_range = cmnd->copy.nr_range + 1;
+ pos = le64_to_cpu(req->cmd->copy.sdlba) << req->ns->blksize_shift;
+ if (unlikely(pos + req->transfer_len > req->ns->size)) {
+ nvmet_req_complete(req, errno_to_nvme_status(req, -ENOSPC));
+ return;
+ }
+
+ for (id = 0 ; id < nr_range; id++) {
+ struct nvme_copy_range range;
+
+ ret = nvmet_copy_from_sgl(req, id * sizeof(range), &range,
+ sizeof(range));
+ if (ret)
+ goto out;
+
+ len = (le16_to_cpu(range.nlb) + 1) << (req->ns->blksize_shift);
+ src = (le64_to_cpu(range.slba) << (req->ns->blksize_shift));
+ ret = vfs_copy_file_range(req->ns->file, src, req->ns->file, pos, len, 0);
+out:
+ if (ret != len) {
+ pos += ret;
+ req->cqe->result.u32 = cpu_to_le32(id);
+ nvmet_req_complete(req, ret < 0 ? errno_to_nvme_status(req, ret) :
+ errno_to_nvme_status(req, -EIO));
+ return;
+
+ } else
+ pos += len;
+}
+ nvmet_req_complete(req, ret);
+
+}
static void nvmet_file_execute_dsm(struct nvmet_req *req)
{
if (!nvmet_check_data_len_lte(req, nvmet_dsm_len(req)))
@@ -355,6 +395,11 @@ static void nvmet_file_execute_dsm(struct nvmet_req *req)
schedule_work(&req->f.work);
}
+static void nvmet_file_execute_copy(struct nvmet_req *req)
+{
+ INIT_WORK(&req->f.work, nvmet_file_copy_work);
+ schedule_work(&req->f.work);
+}
static void nvmet_file_write_zeroes_work(struct work_struct *w)
{
struct nvmet_req *req = container_of(w, struct nvmet_req, f.work);
@@ -401,6 +446,9 @@ u16 nvmet_file_parse_io_cmd(struct nvmet_req *req)
case nvme_cmd_write_zeroes:
req->execute = nvmet_file_execute_write_zeroes;
return 0;
+ case nvme_cmd_copy:
+ req->execute = nvmet_file_execute_copy;
+ return 0;
default:
return nvmet_report_invalid_opcode(req);
}
--
2.30.0-rc0
--
dm-devel mailing list
dm-devel@redhat.com
https://listman.redhat.com/mailman/listinfo/dm-devel
^ permalink raw reply related [flat|nested] 272+ messages in thread* Re: [PATCH v2 07/10] nvmet: add copy command support for bdev and file ns
2022-02-07 14:13 ` [dm-devel] " Nitesh Shetty
(?)
@ 2022-02-07 18:10 ` kernel test robot
-1 siblings, 0 replies; 272+ messages in thread
From: kernel test robot @ 2022-02-07 18:10 UTC (permalink / raw)
To: Nitesh Shetty, mpatocka
Cc: kbuild-all, javier, chaitanyak, linux-block, linux-scsi,
dm-devel, linux-nvme, linux-fsdevel, axboe, msnitzer
Hi Nitesh,
Thank you for the patch! Perhaps something to improve:
[auto build test WARNING on axboe-block/for-next]
[also build test WARNING on linus/master v5.17-rc3 next-20220207]
[cannot apply to device-mapper-dm/for-next]
[If your patch is applied to the wrong git tree, kindly drop us a note.
And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch]
url: https://github.com/0day-ci/linux/commits/Nitesh-Shetty/block-make-bio_map_kern-non-static/20220207-231407
base: https://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux-block.git for-next
config: microblaze-buildonly-randconfig-r003-20220207 (https://download.01.org/0day-ci/archive/20220208/202202080206.J6kilCeY-lkp@intel.com/config)
compiler: microblaze-linux-gcc (GCC) 11.2.0
reproduce (this is a W=1 build):
wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
chmod +x ~/bin/make.cross
# https://github.com/0day-ci/linux/commit/6bb6ea64499e1ac27975e79bb2eee89f07861893
git remote add linux-review https://github.com/0day-ci/linux
git fetch --no-tags linux-review Nitesh-Shetty/block-make-bio_map_kern-non-static/20220207-231407
git checkout 6bb6ea64499e1ac27975e79bb2eee89f07861893
# save the config file to linux build tree
mkdir build_dir
COMPILER_INSTALL_PATH=$HOME/0day COMPILER=gcc-11.2.0 make.cross O=build_dir ARCH=microblaze SHELL=/bin/bash drivers/nvme/target/
If you fix the issue, kindly add following tag as appropriate
Reported-by: kernel test robot <lkp@intel.com>
All warnings (new ones prefixed by >>):
In file included from include/linux/byteorder/big_endian.h:5,
from arch/microblaze/include/uapi/asm/byteorder.h:8,
from include/asm-generic/bitops/le.h:6,
from include/asm-generic/bitops.h:35,
from ./arch/microblaze/include/generated/asm/bitops.h:1,
from include/linux/bitops.h:33,
from include/linux/log2.h:12,
from include/asm-generic/div64.h:55,
from ./arch/microblaze/include/generated/asm/div64.h:1,
from include/linux/math.h:5,
from include/linux/math64.h:6,
from include/linux/time.h:6,
from include/linux/stat.h:19,
from include/linux/module.h:13,
from drivers/nvme/target/admin-cmd.c:7:
drivers/nvme/target/admin-cmd.c: In function 'nvmet_execute_identify_ns':
>> include/uapi/linux/byteorder/big_endian.h:34:26: warning: conversion from 'unsigned int' to '__le16' {aka 'short unsigned int'} changes value from '524288' to '0' [-Woverflow]
34 | #define __cpu_to_le32(x) ((__force __le32)__swab32((x)))
| ^
include/linux/byteorder/generic.h:88:21: note: in expansion of macro '__cpu_to_le32'
88 | #define cpu_to_le32 __cpu_to_le32
| ^~~~~~~~~~~~~
drivers/nvme/target/admin-cmd.c:534:29: note: in expansion of macro 'cpu_to_le32'
534 | id->mssrl = cpu_to_le32(BIO_MAX_VECS << (PAGE_SHIFT - SECTOR_SHIFT));
| ^~~~~~~~~~~
vim +34 include/uapi/linux/byteorder/big_endian.h
5921e6f8809b161 David Howells 2012-10-13 15
5921e6f8809b161 David Howells 2012-10-13 16 #define __constant_htonl(x) ((__force __be32)(__u32)(x))
5921e6f8809b161 David Howells 2012-10-13 17 #define __constant_ntohl(x) ((__force __u32)(__be32)(x))
5921e6f8809b161 David Howells 2012-10-13 18 #define __constant_htons(x) ((__force __be16)(__u16)(x))
5921e6f8809b161 David Howells 2012-10-13 19 #define __constant_ntohs(x) ((__force __u16)(__be16)(x))
5921e6f8809b161 David Howells 2012-10-13 20 #define __constant_cpu_to_le64(x) ((__force __le64)___constant_swab64((x)))
5921e6f8809b161 David Howells 2012-10-13 21 #define __constant_le64_to_cpu(x) ___constant_swab64((__force __u64)(__le64)(x))
5921e6f8809b161 David Howells 2012-10-13 22 #define __constant_cpu_to_le32(x) ((__force __le32)___constant_swab32((x)))
5921e6f8809b161 David Howells 2012-10-13 23 #define __constant_le32_to_cpu(x) ___constant_swab32((__force __u32)(__le32)(x))
5921e6f8809b161 David Howells 2012-10-13 24 #define __constant_cpu_to_le16(x) ((__force __le16)___constant_swab16((x)))
5921e6f8809b161 David Howells 2012-10-13 25 #define __constant_le16_to_cpu(x) ___constant_swab16((__force __u16)(__le16)(x))
5921e6f8809b161 David Howells 2012-10-13 26 #define __constant_cpu_to_be64(x) ((__force __be64)(__u64)(x))
5921e6f8809b161 David Howells 2012-10-13 27 #define __constant_be64_to_cpu(x) ((__force __u64)(__be64)(x))
5921e6f8809b161 David Howells 2012-10-13 28 #define __constant_cpu_to_be32(x) ((__force __be32)(__u32)(x))
5921e6f8809b161 David Howells 2012-10-13 29 #define __constant_be32_to_cpu(x) ((__force __u32)(__be32)(x))
5921e6f8809b161 David Howells 2012-10-13 30 #define __constant_cpu_to_be16(x) ((__force __be16)(__u16)(x))
5921e6f8809b161 David Howells 2012-10-13 31 #define __constant_be16_to_cpu(x) ((__force __u16)(__be16)(x))
5921e6f8809b161 David Howells 2012-10-13 32 #define __cpu_to_le64(x) ((__force __le64)__swab64((x)))
5921e6f8809b161 David Howells 2012-10-13 33 #define __le64_to_cpu(x) __swab64((__force __u64)(__le64)(x))
5921e6f8809b161 David Howells 2012-10-13 @34 #define __cpu_to_le32(x) ((__force __le32)__swab32((x)))
5921e6f8809b161 David Howells 2012-10-13 35 #define __le32_to_cpu(x) __swab32((__force __u32)(__le32)(x))
5921e6f8809b161 David Howells 2012-10-13 36 #define __cpu_to_le16(x) ((__force __le16)__swab16((x)))
5921e6f8809b161 David Howells 2012-10-13 37 #define __le16_to_cpu(x) __swab16((__force __u16)(__le16)(x))
5921e6f8809b161 David Howells 2012-10-13 38 #define __cpu_to_be64(x) ((__force __be64)(__u64)(x))
5921e6f8809b161 David Howells 2012-10-13 39 #define __be64_to_cpu(x) ((__force __u64)(__be64)(x))
5921e6f8809b161 David Howells 2012-10-13 40 #define __cpu_to_be32(x) ((__force __be32)(__u32)(x))
5921e6f8809b161 David Howells 2012-10-13 41 #define __be32_to_cpu(x) ((__force __u32)(__be32)(x))
5921e6f8809b161 David Howells 2012-10-13 42 #define __cpu_to_be16(x) ((__force __be16)(__u16)(x))
5921e6f8809b161 David Howells 2012-10-13 43 #define __be16_to_cpu(x) ((__force __u16)(__be16)(x))
5921e6f8809b161 David Howells 2012-10-13 44
---
0-DAY CI Kernel Test Service, Intel Corporation
https://lists.01.org/hyperkitty/list/kbuild-all@lists.01.org
^ permalink raw reply [flat|nested] 272+ messages in thread* Re: [PATCH v2 07/10] nvmet: add copy command support for bdev and file ns
@ 2022-02-07 18:10 ` kernel test robot
0 siblings, 0 replies; 272+ messages in thread
From: kernel test robot @ 2022-02-07 18:10 UTC (permalink / raw)
To: kbuild-all
[-- Attachment #1: Type: text/plain, Size: 6726 bytes --]
Hi Nitesh,
Thank you for the patch! Perhaps something to improve:
[auto build test WARNING on axboe-block/for-next]
[also build test WARNING on linus/master v5.17-rc3 next-20220207]
[cannot apply to device-mapper-dm/for-next]
[If your patch is applied to the wrong git tree, kindly drop us a note.
And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch]
url: https://github.com/0day-ci/linux/commits/Nitesh-Shetty/block-make-bio_map_kern-non-static/20220207-231407
base: https://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux-block.git for-next
config: microblaze-buildonly-randconfig-r003-20220207 (https://download.01.org/0day-ci/archive/20220208/202202080206.J6kilCeY-lkp(a)intel.com/config)
compiler: microblaze-linux-gcc (GCC) 11.2.0
reproduce (this is a W=1 build):
wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
chmod +x ~/bin/make.cross
# https://github.com/0day-ci/linux/commit/6bb6ea64499e1ac27975e79bb2eee89f07861893
git remote add linux-review https://github.com/0day-ci/linux
git fetch --no-tags linux-review Nitesh-Shetty/block-make-bio_map_kern-non-static/20220207-231407
git checkout 6bb6ea64499e1ac27975e79bb2eee89f07861893
# save the config file to linux build tree
mkdir build_dir
COMPILER_INSTALL_PATH=$HOME/0day COMPILER=gcc-11.2.0 make.cross O=build_dir ARCH=microblaze SHELL=/bin/bash drivers/nvme/target/
If you fix the issue, kindly add following tag as appropriate
Reported-by: kernel test robot <lkp@intel.com>
All warnings (new ones prefixed by >>):
In file included from include/linux/byteorder/big_endian.h:5,
from arch/microblaze/include/uapi/asm/byteorder.h:8,
from include/asm-generic/bitops/le.h:6,
from include/asm-generic/bitops.h:35,
from ./arch/microblaze/include/generated/asm/bitops.h:1,
from include/linux/bitops.h:33,
from include/linux/log2.h:12,
from include/asm-generic/div64.h:55,
from ./arch/microblaze/include/generated/asm/div64.h:1,
from include/linux/math.h:5,
from include/linux/math64.h:6,
from include/linux/time.h:6,
from include/linux/stat.h:19,
from include/linux/module.h:13,
from drivers/nvme/target/admin-cmd.c:7:
drivers/nvme/target/admin-cmd.c: In function 'nvmet_execute_identify_ns':
>> include/uapi/linux/byteorder/big_endian.h:34:26: warning: conversion from 'unsigned int' to '__le16' {aka 'short unsigned int'} changes value from '524288' to '0' [-Woverflow]
34 | #define __cpu_to_le32(x) ((__force __le32)__swab32((x)))
| ^
include/linux/byteorder/generic.h:88:21: note: in expansion of macro '__cpu_to_le32'
88 | #define cpu_to_le32 __cpu_to_le32
| ^~~~~~~~~~~~~
drivers/nvme/target/admin-cmd.c:534:29: note: in expansion of macro 'cpu_to_le32'
534 | id->mssrl = cpu_to_le32(BIO_MAX_VECS << (PAGE_SHIFT - SECTOR_SHIFT));
| ^~~~~~~~~~~
vim +34 include/uapi/linux/byteorder/big_endian.h
5921e6f8809b161 David Howells 2012-10-13 15
5921e6f8809b161 David Howells 2012-10-13 16 #define __constant_htonl(x) ((__force __be32)(__u32)(x))
5921e6f8809b161 David Howells 2012-10-13 17 #define __constant_ntohl(x) ((__force __u32)(__be32)(x))
5921e6f8809b161 David Howells 2012-10-13 18 #define __constant_htons(x) ((__force __be16)(__u16)(x))
5921e6f8809b161 David Howells 2012-10-13 19 #define __constant_ntohs(x) ((__force __u16)(__be16)(x))
5921e6f8809b161 David Howells 2012-10-13 20 #define __constant_cpu_to_le64(x) ((__force __le64)___constant_swab64((x)))
5921e6f8809b161 David Howells 2012-10-13 21 #define __constant_le64_to_cpu(x) ___constant_swab64((__force __u64)(__le64)(x))
5921e6f8809b161 David Howells 2012-10-13 22 #define __constant_cpu_to_le32(x) ((__force __le32)___constant_swab32((x)))
5921e6f8809b161 David Howells 2012-10-13 23 #define __constant_le32_to_cpu(x) ___constant_swab32((__force __u32)(__le32)(x))
5921e6f8809b161 David Howells 2012-10-13 24 #define __constant_cpu_to_le16(x) ((__force __le16)___constant_swab16((x)))
5921e6f8809b161 David Howells 2012-10-13 25 #define __constant_le16_to_cpu(x) ___constant_swab16((__force __u16)(__le16)(x))
5921e6f8809b161 David Howells 2012-10-13 26 #define __constant_cpu_to_be64(x) ((__force __be64)(__u64)(x))
5921e6f8809b161 David Howells 2012-10-13 27 #define __constant_be64_to_cpu(x) ((__force __u64)(__be64)(x))
5921e6f8809b161 David Howells 2012-10-13 28 #define __constant_cpu_to_be32(x) ((__force __be32)(__u32)(x))
5921e6f8809b161 David Howells 2012-10-13 29 #define __constant_be32_to_cpu(x) ((__force __u32)(__be32)(x))
5921e6f8809b161 David Howells 2012-10-13 30 #define __constant_cpu_to_be16(x) ((__force __be16)(__u16)(x))
5921e6f8809b161 David Howells 2012-10-13 31 #define __constant_be16_to_cpu(x) ((__force __u16)(__be16)(x))
5921e6f8809b161 David Howells 2012-10-13 32 #define __cpu_to_le64(x) ((__force __le64)__swab64((x)))
5921e6f8809b161 David Howells 2012-10-13 33 #define __le64_to_cpu(x) __swab64((__force __u64)(__le64)(x))
5921e6f8809b161 David Howells 2012-10-13 @34 #define __cpu_to_le32(x) ((__force __le32)__swab32((x)))
5921e6f8809b161 David Howells 2012-10-13 35 #define __le32_to_cpu(x) __swab32((__force __u32)(__le32)(x))
5921e6f8809b161 David Howells 2012-10-13 36 #define __cpu_to_le16(x) ((__force __le16)__swab16((x)))
5921e6f8809b161 David Howells 2012-10-13 37 #define __le16_to_cpu(x) __swab16((__force __u16)(__le16)(x))
5921e6f8809b161 David Howells 2012-10-13 38 #define __cpu_to_be64(x) ((__force __be64)(__u64)(x))
5921e6f8809b161 David Howells 2012-10-13 39 #define __be64_to_cpu(x) ((__force __u64)(__be64)(x))
5921e6f8809b161 David Howells 2012-10-13 40 #define __cpu_to_be32(x) ((__force __be32)(__u32)(x))
5921e6f8809b161 David Howells 2012-10-13 41 #define __be32_to_cpu(x) ((__force __u32)(__be32)(x))
5921e6f8809b161 David Howells 2012-10-13 42 #define __cpu_to_be16(x) ((__force __be16)(__u16)(x))
5921e6f8809b161 David Howells 2012-10-13 43 #define __be16_to_cpu(x) ((__force __u16)(__be16)(x))
5921e6f8809b161 David Howells 2012-10-13 44
---
0-DAY CI Kernel Test Service, Intel Corporation
https://lists.01.org/hyperkitty/list/kbuild-all@lists.01.org
^ permalink raw reply [flat|nested] 272+ messages in thread* Re: [dm-devel] [PATCH v2 07/10] nvmet: add copy command support for bdev and file ns
@ 2022-02-07 18:10 ` kernel test robot
0 siblings, 0 replies; 272+ messages in thread
From: kernel test robot @ 2022-02-07 18:10 UTC (permalink / raw)
To: Nitesh Shetty, mpatocka
Cc: axboe, javier, msnitzer, kbuild-all, linux-scsi, chaitanyak,
linux-nvme, linux-block, dm-devel, linux-fsdevel
Hi Nitesh,
Thank you for the patch! Perhaps something to improve:
[auto build test WARNING on axboe-block/for-next]
[also build test WARNING on linus/master v5.17-rc3 next-20220207]
[cannot apply to device-mapper-dm/for-next]
[If your patch is applied to the wrong git tree, kindly drop us a note.
And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch]
url: https://github.com/0day-ci/linux/commits/Nitesh-Shetty/block-make-bio_map_kern-non-static/20220207-231407
base: https://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux-block.git for-next
config: microblaze-buildonly-randconfig-r003-20220207 (https://download.01.org/0day-ci/archive/20220208/202202080206.J6kilCeY-lkp@intel.com/config)
compiler: microblaze-linux-gcc (GCC) 11.2.0
reproduce (this is a W=1 build):
wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
chmod +x ~/bin/make.cross
# https://github.com/0day-ci/linux/commit/6bb6ea64499e1ac27975e79bb2eee89f07861893
git remote add linux-review https://github.com/0day-ci/linux
git fetch --no-tags linux-review Nitesh-Shetty/block-make-bio_map_kern-non-static/20220207-231407
git checkout 6bb6ea64499e1ac27975e79bb2eee89f07861893
# save the config file to linux build tree
mkdir build_dir
COMPILER_INSTALL_PATH=$HOME/0day COMPILER=gcc-11.2.0 make.cross O=build_dir ARCH=microblaze SHELL=/bin/bash drivers/nvme/target/
If you fix the issue, kindly add following tag as appropriate
Reported-by: kernel test robot <lkp@intel.com>
All warnings (new ones prefixed by >>):
In file included from include/linux/byteorder/big_endian.h:5,
from arch/microblaze/include/uapi/asm/byteorder.h:8,
from include/asm-generic/bitops/le.h:6,
from include/asm-generic/bitops.h:35,
from ./arch/microblaze/include/generated/asm/bitops.h:1,
from include/linux/bitops.h:33,
from include/linux/log2.h:12,
from include/asm-generic/div64.h:55,
from ./arch/microblaze/include/generated/asm/div64.h:1,
from include/linux/math.h:5,
from include/linux/math64.h:6,
from include/linux/time.h:6,
from include/linux/stat.h:19,
from include/linux/module.h:13,
from drivers/nvme/target/admin-cmd.c:7:
drivers/nvme/target/admin-cmd.c: In function 'nvmet_execute_identify_ns':
>> include/uapi/linux/byteorder/big_endian.h:34:26: warning: conversion from 'unsigned int' to '__le16' {aka 'short unsigned int'} changes value from '524288' to '0' [-Woverflow]
34 | #define __cpu_to_le32(x) ((__force __le32)__swab32((x)))
| ^
include/linux/byteorder/generic.h:88:21: note: in expansion of macro '__cpu_to_le32'
88 | #define cpu_to_le32 __cpu_to_le32
| ^~~~~~~~~~~~~
drivers/nvme/target/admin-cmd.c:534:29: note: in expansion of macro 'cpu_to_le32'
534 | id->mssrl = cpu_to_le32(BIO_MAX_VECS << (PAGE_SHIFT - SECTOR_SHIFT));
| ^~~~~~~~~~~
vim +34 include/uapi/linux/byteorder/big_endian.h
5921e6f8809b161 David Howells 2012-10-13 15
5921e6f8809b161 David Howells 2012-10-13 16 #define __constant_htonl(x) ((__force __be32)(__u32)(x))
5921e6f8809b161 David Howells 2012-10-13 17 #define __constant_ntohl(x) ((__force __u32)(__be32)(x))
5921e6f8809b161 David Howells 2012-10-13 18 #define __constant_htons(x) ((__force __be16)(__u16)(x))
5921e6f8809b161 David Howells 2012-10-13 19 #define __constant_ntohs(x) ((__force __u16)(__be16)(x))
5921e6f8809b161 David Howells 2012-10-13 20 #define __constant_cpu_to_le64(x) ((__force __le64)___constant_swab64((x)))
5921e6f8809b161 David Howells 2012-10-13 21 #define __constant_le64_to_cpu(x) ___constant_swab64((__force __u64)(__le64)(x))
5921e6f8809b161 David Howells 2012-10-13 22 #define __constant_cpu_to_le32(x) ((__force __le32)___constant_swab32((x)))
5921e6f8809b161 David Howells 2012-10-13 23 #define __constant_le32_to_cpu(x) ___constant_swab32((__force __u32)(__le32)(x))
5921e6f8809b161 David Howells 2012-10-13 24 #define __constant_cpu_to_le16(x) ((__force __le16)___constant_swab16((x)))
5921e6f8809b161 David Howells 2012-10-13 25 #define __constant_le16_to_cpu(x) ___constant_swab16((__force __u16)(__le16)(x))
5921e6f8809b161 David Howells 2012-10-13 26 #define __constant_cpu_to_be64(x) ((__force __be64)(__u64)(x))
5921e6f8809b161 David Howells 2012-10-13 27 #define __constant_be64_to_cpu(x) ((__force __u64)(__be64)(x))
5921e6f8809b161 David Howells 2012-10-13 28 #define __constant_cpu_to_be32(x) ((__force __be32)(__u32)(x))
5921e6f8809b161 David Howells 2012-10-13 29 #define __constant_be32_to_cpu(x) ((__force __u32)(__be32)(x))
5921e6f8809b161 David Howells 2012-10-13 30 #define __constant_cpu_to_be16(x) ((__force __be16)(__u16)(x))
5921e6f8809b161 David Howells 2012-10-13 31 #define __constant_be16_to_cpu(x) ((__force __u16)(__be16)(x))
5921e6f8809b161 David Howells 2012-10-13 32 #define __cpu_to_le64(x) ((__force __le64)__swab64((x)))
5921e6f8809b161 David Howells 2012-10-13 33 #define __le64_to_cpu(x) __swab64((__force __u64)(__le64)(x))
5921e6f8809b161 David Howells 2012-10-13 @34 #define __cpu_to_le32(x) ((__force __le32)__swab32((x)))
5921e6f8809b161 David Howells 2012-10-13 35 #define __le32_to_cpu(x) __swab32((__force __u32)(__le32)(x))
5921e6f8809b161 David Howells 2012-10-13 36 #define __cpu_to_le16(x) ((__force __le16)__swab16((x)))
5921e6f8809b161 David Howells 2012-10-13 37 #define __le16_to_cpu(x) __swab16((__force __u16)(__le16)(x))
5921e6f8809b161 David Howells 2012-10-13 38 #define __cpu_to_be64(x) ((__force __be64)(__u64)(x))
5921e6f8809b161 David Howells 2012-10-13 39 #define __be64_to_cpu(x) ((__force __u64)(__be64)(x))
5921e6f8809b161 David Howells 2012-10-13 40 #define __cpu_to_be32(x) ((__force __be32)(__u32)(x))
5921e6f8809b161 David Howells 2012-10-13 41 #define __be32_to_cpu(x) ((__force __u32)(__be32)(x))
5921e6f8809b161 David Howells 2012-10-13 42 #define __cpu_to_be16(x) ((__force __be16)(__u16)(x))
5921e6f8809b161 David Howells 2012-10-13 43 #define __be16_to_cpu(x) ((__force __u16)(__be16)(x))
5921e6f8809b161 David Howells 2012-10-13 44
---
0-DAY CI Kernel Test Service, Intel Corporation
https://lists.01.org/hyperkitty/list/kbuild-all@lists.01.org
--
dm-devel mailing list
dm-devel@redhat.com
https://listman.redhat.com/mailman/listinfo/dm-devel
^ permalink raw reply [flat|nested] 272+ messages in thread
* Re: [PATCH v2 07/10] nvmet: add copy command support for bdev and file ns
2022-02-07 14:13 ` [dm-devel] " Nitesh Shetty
(?)
@ 2022-02-07 20:12 ` kernel test robot
-1 siblings, 0 replies; 272+ messages in thread
From: kernel test robot @ 2022-02-07 20:12 UTC (permalink / raw)
To: Nitesh Shetty, mpatocka
Cc: llvm, kbuild-all, javier, chaitanyak, linux-block, linux-scsi,
dm-devel, linux-nvme, linux-fsdevel, axboe, msnitzer
Hi Nitesh,
Thank you for the patch! Perhaps something to improve:
[auto build test WARNING on axboe-block/for-next]
[also build test WARNING on linus/master v5.17-rc3 next-20220207]
[cannot apply to device-mapper-dm/for-next]
[If your patch is applied to the wrong git tree, kindly drop us a note.
And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch]
url: https://github.com/0day-ci/linux/commits/Nitesh-Shetty/block-make-bio_map_kern-non-static/20220207-231407
base: https://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux-block.git for-next
config: arm64-randconfig-r031-20220207 (https://download.01.org/0day-ci/archive/20220208/202202080346.u4ubCCIs-lkp@intel.com/config)
compiler: clang version 15.0.0 (https://github.com/llvm/llvm-project 0d8850ae2cae85d49bea6ae0799fa41c7202c05c)
reproduce (this is a W=1 build):
wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
chmod +x ~/bin/make.cross
# install arm64 cross compiling tool for clang build
# apt-get install binutils-aarch64-linux-gnu
# https://github.com/0day-ci/linux/commit/6bb6ea64499e1ac27975e79bb2eee89f07861893
git remote add linux-review https://github.com/0day-ci/linux
git fetch --no-tags linux-review Nitesh-Shetty/block-make-bio_map_kern-non-static/20220207-231407
git checkout 6bb6ea64499e1ac27975e79bb2eee89f07861893
# save the config file to linux build tree
mkdir build_dir
COMPILER_INSTALL_PATH=$HOME/0day COMPILER=clang make.cross W=1 O=build_dir ARCH=arm64 SHELL=/bin/bash drivers/nvme/target/
If you fix the issue, kindly add following tag as appropriate
Reported-by: kernel test robot <lkp@intel.com>
All warnings (new ones prefixed by >>):
>> drivers/nvme/target/admin-cmd.c:534:15: warning: implicit conversion from '__le32' (aka 'unsigned int') to '__le16' (aka 'unsigned short') changes value from 2097152 to 0 [-Wconstant-conversion]
id->mssrl = cpu_to_le32(BIO_MAX_VECS << (PAGE_SHIFT - SECTOR_SHIFT));
~ ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
include/linux/byteorder/generic.h:88:21: note: expanded from macro 'cpu_to_le32'
#define cpu_to_le32 __cpu_to_le32
^
include/uapi/linux/byteorder/big_endian.h:34:27: note: expanded from macro '__cpu_to_le32'
#define __cpu_to_le32(x) ((__force __le32)__swab32((x)))
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~
1 warning generated.
vim +534 drivers/nvme/target/admin-cmd.c
488
489 static void nvmet_execute_identify_ns(struct nvmet_req *req)
490 {
491 struct nvme_id_ns *id;
492 u16 status;
493
494 if (le32_to_cpu(req->cmd->identify.nsid) == NVME_NSID_ALL) {
495 req->error_loc = offsetof(struct nvme_identify, nsid);
496 status = NVME_SC_INVALID_NS | NVME_SC_DNR;
497 goto out;
498 }
499
500 id = kzalloc(sizeof(*id), GFP_KERNEL);
501 if (!id) {
502 status = NVME_SC_INTERNAL;
503 goto out;
504 }
505
506 /* return an all zeroed buffer if we can't find an active namespace */
507 status = nvmet_req_find_ns(req);
508 if (status) {
509 status = 0;
510 goto done;
511 }
512
513 nvmet_ns_revalidate(req->ns);
514
515 /*
516 * nuse = ncap = nsze isn't always true, but we have no way to find
517 * that out from the underlying device.
518 */
519 id->ncap = id->nsze =
520 cpu_to_le64(req->ns->size >> req->ns->blksize_shift);
521 switch (req->port->ana_state[req->ns->anagrpid]) {
522 case NVME_ANA_INACCESSIBLE:
523 case NVME_ANA_PERSISTENT_LOSS:
524 break;
525 default:
526 id->nuse = id->nsze;
527 break;
528 }
529
530 if (req->ns->bdev)
531 nvmet_bdev_set_limits(req->ns->bdev, id);
532 else {
533 id->msrc = to0based(BIO_MAX_VECS);
> 534 id->mssrl = cpu_to_le32(BIO_MAX_VECS << (PAGE_SHIFT - SECTOR_SHIFT));
535 id->mcl = cpu_to_le64(le32_to_cpu(id->mssrl) * BIO_MAX_VECS);
536 }
537
538 /*
539 * We just provide a single LBA format that matches what the
540 * underlying device reports.
541 */
542 id->nlbaf = 0;
543 id->flbas = 0;
544
545 /*
546 * Our namespace might always be shared. Not just with other
547 * controllers, but also with any other user of the block device.
548 */
549 id->nmic = NVME_NS_NMIC_SHARED;
550 id->anagrpid = cpu_to_le32(req->ns->anagrpid);
551
552 memcpy(&id->nguid, &req->ns->nguid, sizeof(id->nguid));
553
554 id->lbaf[0].ds = req->ns->blksize_shift;
555
556 if (req->sq->ctrl->pi_support && nvmet_ns_has_pi(req->ns)) {
557 id->dpc = NVME_NS_DPC_PI_FIRST | NVME_NS_DPC_PI_LAST |
558 NVME_NS_DPC_PI_TYPE1 | NVME_NS_DPC_PI_TYPE2 |
559 NVME_NS_DPC_PI_TYPE3;
560 id->mc = NVME_MC_EXTENDED_LBA;
561 id->dps = req->ns->pi_type;
562 id->flbas = NVME_NS_FLBAS_META_EXT;
563 id->lbaf[0].ms = cpu_to_le16(req->ns->metadata_size);
564 }
565
566 if (req->ns->readonly)
567 id->nsattr |= (1 << 0);
568 done:
569 if (!status)
570 status = nvmet_copy_to_sgl(req, 0, id, sizeof(*id));
571
572 kfree(id);
573 out:
574 nvmet_req_complete(req, status);
575 }
576
---
0-DAY CI Kernel Test Service, Intel Corporation
https://lists.01.org/hyperkitty/list/kbuild-all@lists.01.org
^ permalink raw reply [flat|nested] 272+ messages in thread* Re: [PATCH v2 07/10] nvmet: add copy command support for bdev and file ns
@ 2022-02-07 20:12 ` kernel test robot
0 siblings, 0 replies; 272+ messages in thread
From: kernel test robot @ 2022-02-07 20:12 UTC (permalink / raw)
To: kbuild-all
[-- Attachment #1: Type: text/plain, Size: 5685 bytes --]
Hi Nitesh,
Thank you for the patch! Perhaps something to improve:
[auto build test WARNING on axboe-block/for-next]
[also build test WARNING on linus/master v5.17-rc3 next-20220207]
[cannot apply to device-mapper-dm/for-next]
[If your patch is applied to the wrong git tree, kindly drop us a note.
And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch]
url: https://github.com/0day-ci/linux/commits/Nitesh-Shetty/block-make-bio_map_kern-non-static/20220207-231407
base: https://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux-block.git for-next
config: arm64-randconfig-r031-20220207 (https://download.01.org/0day-ci/archive/20220208/202202080346.u4ubCCIs-lkp(a)intel.com/config)
compiler: clang version 15.0.0 (https://github.com/llvm/llvm-project 0d8850ae2cae85d49bea6ae0799fa41c7202c05c)
reproduce (this is a W=1 build):
wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
chmod +x ~/bin/make.cross
# install arm64 cross compiling tool for clang build
# apt-get install binutils-aarch64-linux-gnu
# https://github.com/0day-ci/linux/commit/6bb6ea64499e1ac27975e79bb2eee89f07861893
git remote add linux-review https://github.com/0day-ci/linux
git fetch --no-tags linux-review Nitesh-Shetty/block-make-bio_map_kern-non-static/20220207-231407
git checkout 6bb6ea64499e1ac27975e79bb2eee89f07861893
# save the config file to linux build tree
mkdir build_dir
COMPILER_INSTALL_PATH=$HOME/0day COMPILER=clang make.cross W=1 O=build_dir ARCH=arm64 SHELL=/bin/bash drivers/nvme/target/
If you fix the issue, kindly add following tag as appropriate
Reported-by: kernel test robot <lkp@intel.com>
All warnings (new ones prefixed by >>):
>> drivers/nvme/target/admin-cmd.c:534:15: warning: implicit conversion from '__le32' (aka 'unsigned int') to '__le16' (aka 'unsigned short') changes value from 2097152 to 0 [-Wconstant-conversion]
id->mssrl = cpu_to_le32(BIO_MAX_VECS << (PAGE_SHIFT - SECTOR_SHIFT));
~ ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
include/linux/byteorder/generic.h:88:21: note: expanded from macro 'cpu_to_le32'
#define cpu_to_le32 __cpu_to_le32
^
include/uapi/linux/byteorder/big_endian.h:34:27: note: expanded from macro '__cpu_to_le32'
#define __cpu_to_le32(x) ((__force __le32)__swab32((x)))
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~
1 warning generated.
vim +534 drivers/nvme/target/admin-cmd.c
488
489 static void nvmet_execute_identify_ns(struct nvmet_req *req)
490 {
491 struct nvme_id_ns *id;
492 u16 status;
493
494 if (le32_to_cpu(req->cmd->identify.nsid) == NVME_NSID_ALL) {
495 req->error_loc = offsetof(struct nvme_identify, nsid);
496 status = NVME_SC_INVALID_NS | NVME_SC_DNR;
497 goto out;
498 }
499
500 id = kzalloc(sizeof(*id), GFP_KERNEL);
501 if (!id) {
502 status = NVME_SC_INTERNAL;
503 goto out;
504 }
505
506 /* return an all zeroed buffer if we can't find an active namespace */
507 status = nvmet_req_find_ns(req);
508 if (status) {
509 status = 0;
510 goto done;
511 }
512
513 nvmet_ns_revalidate(req->ns);
514
515 /*
516 * nuse = ncap = nsze isn't always true, but we have no way to find
517 * that out from the underlying device.
518 */
519 id->ncap = id->nsze =
520 cpu_to_le64(req->ns->size >> req->ns->blksize_shift);
521 switch (req->port->ana_state[req->ns->anagrpid]) {
522 case NVME_ANA_INACCESSIBLE:
523 case NVME_ANA_PERSISTENT_LOSS:
524 break;
525 default:
526 id->nuse = id->nsze;
527 break;
528 }
529
530 if (req->ns->bdev)
531 nvmet_bdev_set_limits(req->ns->bdev, id);
532 else {
533 id->msrc = to0based(BIO_MAX_VECS);
> 534 id->mssrl = cpu_to_le32(BIO_MAX_VECS << (PAGE_SHIFT - SECTOR_SHIFT));
535 id->mcl = cpu_to_le64(le32_to_cpu(id->mssrl) * BIO_MAX_VECS);
536 }
537
538 /*
539 * We just provide a single LBA format that matches what the
540 * underlying device reports.
541 */
542 id->nlbaf = 0;
543 id->flbas = 0;
544
545 /*
546 * Our namespace might always be shared. Not just with other
547 * controllers, but also with any other user of the block device.
548 */
549 id->nmic = NVME_NS_NMIC_SHARED;
550 id->anagrpid = cpu_to_le32(req->ns->anagrpid);
551
552 memcpy(&id->nguid, &req->ns->nguid, sizeof(id->nguid));
553
554 id->lbaf[0].ds = req->ns->blksize_shift;
555
556 if (req->sq->ctrl->pi_support && nvmet_ns_has_pi(req->ns)) {
557 id->dpc = NVME_NS_DPC_PI_FIRST | NVME_NS_DPC_PI_LAST |
558 NVME_NS_DPC_PI_TYPE1 | NVME_NS_DPC_PI_TYPE2 |
559 NVME_NS_DPC_PI_TYPE3;
560 id->mc = NVME_MC_EXTENDED_LBA;
561 id->dps = req->ns->pi_type;
562 id->flbas = NVME_NS_FLBAS_META_EXT;
563 id->lbaf[0].ms = cpu_to_le16(req->ns->metadata_size);
564 }
565
566 if (req->ns->readonly)
567 id->nsattr |= (1 << 0);
568 done:
569 if (!status)
570 status = nvmet_copy_to_sgl(req, 0, id, sizeof(*id));
571
572 kfree(id);
573 out:
574 nvmet_req_complete(req, status);
575 }
576
---
0-DAY CI Kernel Test Service, Intel Corporation
https://lists.01.org/hyperkitty/list/kbuild-all@lists.01.org
^ permalink raw reply [flat|nested] 272+ messages in thread* Re: [dm-devel] [PATCH v2 07/10] nvmet: add copy command support for bdev and file ns
@ 2022-02-07 20:12 ` kernel test robot
0 siblings, 0 replies; 272+ messages in thread
From: kernel test robot @ 2022-02-07 20:12 UTC (permalink / raw)
To: Nitesh Shetty, mpatocka
Cc: axboe, javier, msnitzer, kbuild-all, linux-scsi, llvm,
chaitanyak, linux-nvme, linux-block, dm-devel, linux-fsdevel
Hi Nitesh,
Thank you for the patch! Perhaps something to improve:
[auto build test WARNING on axboe-block/for-next]
[also build test WARNING on linus/master v5.17-rc3 next-20220207]
[cannot apply to device-mapper-dm/for-next]
[If your patch is applied to the wrong git tree, kindly drop us a note.
And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch]
url: https://github.com/0day-ci/linux/commits/Nitesh-Shetty/block-make-bio_map_kern-non-static/20220207-231407
base: https://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux-block.git for-next
config: arm64-randconfig-r031-20220207 (https://download.01.org/0day-ci/archive/20220208/202202080346.u4ubCCIs-lkp@intel.com/config)
compiler: clang version 15.0.0 (https://github.com/llvm/llvm-project 0d8850ae2cae85d49bea6ae0799fa41c7202c05c)
reproduce (this is a W=1 build):
wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
chmod +x ~/bin/make.cross
# install arm64 cross compiling tool for clang build
# apt-get install binutils-aarch64-linux-gnu
# https://github.com/0day-ci/linux/commit/6bb6ea64499e1ac27975e79bb2eee89f07861893
git remote add linux-review https://github.com/0day-ci/linux
git fetch --no-tags linux-review Nitesh-Shetty/block-make-bio_map_kern-non-static/20220207-231407
git checkout 6bb6ea64499e1ac27975e79bb2eee89f07861893
# save the config file to linux build tree
mkdir build_dir
COMPILER_INSTALL_PATH=$HOME/0day COMPILER=clang make.cross W=1 O=build_dir ARCH=arm64 SHELL=/bin/bash drivers/nvme/target/
If you fix the issue, kindly add following tag as appropriate
Reported-by: kernel test robot <lkp@intel.com>
All warnings (new ones prefixed by >>):
>> drivers/nvme/target/admin-cmd.c:534:15: warning: implicit conversion from '__le32' (aka 'unsigned int') to '__le16' (aka 'unsigned short') changes value from 2097152 to 0 [-Wconstant-conversion]
id->mssrl = cpu_to_le32(BIO_MAX_VECS << (PAGE_SHIFT - SECTOR_SHIFT));
~ ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
include/linux/byteorder/generic.h:88:21: note: expanded from macro 'cpu_to_le32'
#define cpu_to_le32 __cpu_to_le32
^
include/uapi/linux/byteorder/big_endian.h:34:27: note: expanded from macro '__cpu_to_le32'
#define __cpu_to_le32(x) ((__force __le32)__swab32((x)))
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~
1 warning generated.
vim +534 drivers/nvme/target/admin-cmd.c
488
489 static void nvmet_execute_identify_ns(struct nvmet_req *req)
490 {
491 struct nvme_id_ns *id;
492 u16 status;
493
494 if (le32_to_cpu(req->cmd->identify.nsid) == NVME_NSID_ALL) {
495 req->error_loc = offsetof(struct nvme_identify, nsid);
496 status = NVME_SC_INVALID_NS | NVME_SC_DNR;
497 goto out;
498 }
499
500 id = kzalloc(sizeof(*id), GFP_KERNEL);
501 if (!id) {
502 status = NVME_SC_INTERNAL;
503 goto out;
504 }
505
506 /* return an all zeroed buffer if we can't find an active namespace */
507 status = nvmet_req_find_ns(req);
508 if (status) {
509 status = 0;
510 goto done;
511 }
512
513 nvmet_ns_revalidate(req->ns);
514
515 /*
516 * nuse = ncap = nsze isn't always true, but we have no way to find
517 * that out from the underlying device.
518 */
519 id->ncap = id->nsze =
520 cpu_to_le64(req->ns->size >> req->ns->blksize_shift);
521 switch (req->port->ana_state[req->ns->anagrpid]) {
522 case NVME_ANA_INACCESSIBLE:
523 case NVME_ANA_PERSISTENT_LOSS:
524 break;
525 default:
526 id->nuse = id->nsze;
527 break;
528 }
529
530 if (req->ns->bdev)
531 nvmet_bdev_set_limits(req->ns->bdev, id);
532 else {
533 id->msrc = to0based(BIO_MAX_VECS);
> 534 id->mssrl = cpu_to_le32(BIO_MAX_VECS << (PAGE_SHIFT - SECTOR_SHIFT));
535 id->mcl = cpu_to_le64(le32_to_cpu(id->mssrl) * BIO_MAX_VECS);
536 }
537
538 /*
539 * We just provide a single LBA format that matches what the
540 * underlying device reports.
541 */
542 id->nlbaf = 0;
543 id->flbas = 0;
544
545 /*
546 * Our namespace might always be shared. Not just with other
547 * controllers, but also with any other user of the block device.
548 */
549 id->nmic = NVME_NS_NMIC_SHARED;
550 id->anagrpid = cpu_to_le32(req->ns->anagrpid);
551
552 memcpy(&id->nguid, &req->ns->nguid, sizeof(id->nguid));
553
554 id->lbaf[0].ds = req->ns->blksize_shift;
555
556 if (req->sq->ctrl->pi_support && nvmet_ns_has_pi(req->ns)) {
557 id->dpc = NVME_NS_DPC_PI_FIRST | NVME_NS_DPC_PI_LAST |
558 NVME_NS_DPC_PI_TYPE1 | NVME_NS_DPC_PI_TYPE2 |
559 NVME_NS_DPC_PI_TYPE3;
560 id->mc = NVME_MC_EXTENDED_LBA;
561 id->dps = req->ns->pi_type;
562 id->flbas = NVME_NS_FLBAS_META_EXT;
563 id->lbaf[0].ms = cpu_to_le16(req->ns->metadata_size);
564 }
565
566 if (req->ns->readonly)
567 id->nsattr |= (1 << 0);
568 done:
569 if (!status)
570 status = nvmet_copy_to_sgl(req, 0, id, sizeof(*id));
571
572 kfree(id);
573 out:
574 nvmet_req_complete(req, status);
575 }
576
---
0-DAY CI Kernel Test Service, Intel Corporation
https://lists.01.org/hyperkitty/list/kbuild-all@lists.01.org
--
dm-devel mailing list
dm-devel@redhat.com
https://listman.redhat.com/mailman/listinfo/dm-devel
^ permalink raw reply [flat|nested] 272+ messages in thread
* Re: [PATCH v2 07/10] nvmet: add copy command support for bdev and file ns
2022-02-07 14:13 ` [dm-devel] " Nitesh Shetty
(?)
@ 2022-02-10 8:31 ` kernel test robot
-1 siblings, 0 replies; 272+ messages in thread
From: kernel test robot @ 2022-02-10 8:31 UTC (permalink / raw)
To: Nitesh Shetty, mpatocka
Cc: kbuild-all, javier, chaitanyak, linux-block, linux-scsi,
dm-devel, linux-nvme, linux-fsdevel, axboe, msnitzer, bvanassche,
martin.petersen, roland, hare, kbusch, hch, Frederick.Knight,
zach.brown, osandov, lsf-pc, djwong, josef, clm, dsterba, tytso,
jack, joshi.k, arnav.dawn, nj.shetty
Hi Nitesh,
Thank you for the patch! Perhaps something to improve:
[auto build test WARNING on axboe-block/for-next]
[also build test WARNING on linus/master v5.17-rc3 next-20220209]
[cannot apply to device-mapper-dm/for-next]
[If your patch is applied to the wrong git tree, kindly drop us a note.
And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch]
url: https://github.com/0day-ci/linux/commits/Nitesh-Shetty/block-make-bio_map_kern-non-static/20220207-231407
base: https://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux-block.git for-next
config: arm64-randconfig-s032-20220207 (https://download.01.org/0day-ci/archive/20220210/202202101647.VtWTgalm-lkp@intel.com/config)
compiler: aarch64-linux-gcc (GCC) 11.2.0
reproduce:
wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
chmod +x ~/bin/make.cross
# apt-get install sparse
# sparse version: v0.6.4-dirty
# https://github.com/0day-ci/linux/commit/6bb6ea64499e1ac27975e79bb2eee89f07861893
git remote add linux-review https://github.com/0day-ci/linux
git fetch --no-tags linux-review Nitesh-Shetty/block-make-bio_map_kern-non-static/20220207-231407
git checkout 6bb6ea64499e1ac27975e79bb2eee89f07861893
# save the config file to linux build tree
mkdir build_dir
COMPILER_INSTALL_PATH=$HOME/0day COMPILER=gcc-11.2.0 make.cross C=1 CF='-fdiagnostic-prefix -D__CHECK_ENDIAN__' O=build_dir ARCH=arm64 SHELL=/bin/bash drivers/nvme/target/
If you fix the issue, kindly add following tag as appropriate
Reported-by: kernel test robot <lkp@intel.com>
sparse warnings: (new ones prefixed by >>)
>> drivers/nvme/target/io-cmd-bdev.c:52:25: sparse: sparse: incorrect type in assignment (different base types) @@ expected restricted __le32 [usertype] mcl @@ got restricted __le64 [usertype] @@
drivers/nvme/target/io-cmd-bdev.c:52:25: sparse: expected restricted __le32 [usertype] mcl
drivers/nvme/target/io-cmd-bdev.c:52:25: sparse: got restricted __le64 [usertype]
>> drivers/nvme/target/io-cmd-bdev.c:53:27: sparse: sparse: incorrect type in assignment (different base types) @@ expected restricted __le16 [usertype] mssrl @@ got restricted __le32 [usertype] @@
drivers/nvme/target/io-cmd-bdev.c:53:27: sparse: expected restricted __le16 [usertype] mssrl
drivers/nvme/target/io-cmd-bdev.c:53:27: sparse: got restricted __le32 [usertype]
>> drivers/nvme/target/io-cmd-bdev.c:55:26: sparse: sparse: incorrect type in assignment (different base types) @@ expected unsigned char [usertype] msrc @@ got restricted __le16 @@
drivers/nvme/target/io-cmd-bdev.c:55:26: sparse: expected unsigned char [usertype] msrc
drivers/nvme/target/io-cmd-bdev.c:55:26: sparse: got restricted __le16
drivers/nvme/target/io-cmd-bdev.c:58:34: sparse: sparse: incorrect type in assignment (different base types) @@ expected unsigned char [usertype] msrc @@ got restricted __le16 @@
drivers/nvme/target/io-cmd-bdev.c:58:34: sparse: expected unsigned char [usertype] msrc
drivers/nvme/target/io-cmd-bdev.c:58:34: sparse: got restricted __le16
drivers/nvme/target/io-cmd-bdev.c:59:35: sparse: sparse: incorrect type in assignment (different base types) @@ expected restricted __le16 [usertype] mssrl @@ got restricted __le32 [usertype] @@
drivers/nvme/target/io-cmd-bdev.c:59:35: sparse: expected restricted __le16 [usertype] mssrl
drivers/nvme/target/io-cmd-bdev.c:59:35: sparse: got restricted __le32 [usertype]
>> drivers/nvme/target/io-cmd-bdev.c:61:35: sparse: sparse: cast to restricted __le32
>> drivers/nvme/target/io-cmd-bdev.c:61:35: sparse: sparse: cast from restricted __le16
drivers/nvme/target/io-cmd-bdev.c:61:33: sparse: sparse: incorrect type in assignment (different base types) @@ expected restricted __le32 [usertype] mcl @@ got restricted __le64 [usertype] @@
drivers/nvme/target/io-cmd-bdev.c:61:33: sparse: expected restricted __le32 [usertype] mcl
drivers/nvme/target/io-cmd-bdev.c:61:33: sparse: got restricted __le64 [usertype]
drivers/nvme/target/io-cmd-bdev.c:65:34: sparse: sparse: incorrect type in assignment (different base types) @@ expected unsigned char [usertype] msrc @@ got restricted __le16 @@
drivers/nvme/target/io-cmd-bdev.c:65:34: sparse: expected unsigned char [usertype] msrc
drivers/nvme/target/io-cmd-bdev.c:65:34: sparse: got restricted __le16
drivers/nvme/target/io-cmd-bdev.c:66:35: sparse: sparse: incorrect type in assignment (different base types) @@ expected restricted __le16 [usertype] mssrl @@ got restricted __le32 [usertype] @@
drivers/nvme/target/io-cmd-bdev.c:66:35: sparse: expected restricted __le16 [usertype] mssrl
drivers/nvme/target/io-cmd-bdev.c:66:35: sparse: got restricted __le32 [usertype]
drivers/nvme/target/io-cmd-bdev.c:68:35: sparse: sparse: cast to restricted __le32
drivers/nvme/target/io-cmd-bdev.c:68:35: sparse: sparse: cast from restricted __le16
drivers/nvme/target/io-cmd-bdev.c:68:35: sparse: sparse: cast to restricted __le32
drivers/nvme/target/io-cmd-bdev.c:68:35: sparse: sparse: cast from restricted __le16
drivers/nvme/target/io-cmd-bdev.c:68:35: sparse: sparse: cast to restricted __le32
drivers/nvme/target/io-cmd-bdev.c:68:35: sparse: sparse: cast from restricted __le16
drivers/nvme/target/io-cmd-bdev.c:68:35: sparse: sparse: cast to restricted __le32
drivers/nvme/target/io-cmd-bdev.c:68:35: sparse: sparse: cast from restricted __le16
drivers/nvme/target/io-cmd-bdev.c:68:35: sparse: sparse: cast to restricted __le32
drivers/nvme/target/io-cmd-bdev.c:68:35: sparse: sparse: cast from restricted __le16
drivers/nvme/target/io-cmd-bdev.c:68:35: sparse: sparse: cast to restricted __le32
drivers/nvme/target/io-cmd-bdev.c:68:35: sparse: sparse: cast from restricted __le16
drivers/nvme/target/io-cmd-bdev.c:68:33: sparse: sparse: incorrect type in assignment (different base types) @@ expected restricted __le32 [usertype] mcl @@ got restricted __le64 [usertype] @@
drivers/nvme/target/io-cmd-bdev.c:68:33: sparse: expected restricted __le32 [usertype] mcl
drivers/nvme/target/io-cmd-bdev.c:68:33: sparse: got restricted __le64 [usertype]
--
>> drivers/nvme/target/admin-cmd.c:533:26: sparse: sparse: incorrect type in assignment (different base types) @@ expected unsigned char [usertype] msrc @@ got restricted __le16 @@
drivers/nvme/target/admin-cmd.c:533:26: sparse: expected unsigned char [usertype] msrc
drivers/nvme/target/admin-cmd.c:533:26: sparse: got restricted __le16
>> drivers/nvme/target/admin-cmd.c:534:27: sparse: sparse: incorrect type in assignment (different base types) @@ expected restricted __le16 [usertype] mssrl @@ got restricted __le32 [usertype] @@
drivers/nvme/target/admin-cmd.c:534:27: sparse: expected restricted __le16 [usertype] mssrl
drivers/nvme/target/admin-cmd.c:534:27: sparse: got restricted __le32 [usertype]
>> drivers/nvme/target/admin-cmd.c:535:27: sparse: sparse: cast to restricted __le32
>> drivers/nvme/target/admin-cmd.c:535:27: sparse: sparse: cast from restricted __le16
>> drivers/nvme/target/admin-cmd.c:535:25: sparse: sparse: incorrect type in assignment (different base types) @@ expected restricted __le32 [usertype] mcl @@ got restricted __le64 [usertype] @@
drivers/nvme/target/admin-cmd.c:535:25: sparse: expected restricted __le32 [usertype] mcl
drivers/nvme/target/admin-cmd.c:535:25: sparse: got restricted __le64 [usertype]
vim +52 drivers/nvme/target/io-cmd-bdev.c
11
12 void nvmet_bdev_set_limits(struct block_device *bdev, struct nvme_id_ns *id)
13 {
14 const struct queue_limits *ql = &bdev_get_queue(bdev)->limits;
15 /* Number of logical blocks per physical block. */
16 const u32 lpp = ql->physical_block_size / ql->logical_block_size;
17 /* Logical blocks per physical block, 0's based. */
18 const __le16 lpp0b = to0based(lpp);
19
20 /*
21 * For NVMe 1.2 and later, bit 1 indicates that the fields NAWUN,
22 * NAWUPF, and NACWU are defined for this namespace and should be
23 * used by the host for this namespace instead of the AWUN, AWUPF,
24 * and ACWU fields in the Identify Controller data structure. If
25 * any of these fields are zero that means that the corresponding
26 * field from the identify controller data structure should be used.
27 */
28 id->nsfeat |= 1 << 1;
29 id->nawun = lpp0b;
30 id->nawupf = lpp0b;
31 id->nacwu = lpp0b;
32
33 /*
34 * Bit 4 indicates that the fields NPWG, NPWA, NPDG, NPDA, and
35 * NOWS are defined for this namespace and should be used by
36 * the host for I/O optimization.
37 */
38 id->nsfeat |= 1 << 4;
39 /* NPWG = Namespace Preferred Write Granularity. 0's based */
40 id->npwg = lpp0b;
41 /* NPWA = Namespace Preferred Write Alignment. 0's based */
42 id->npwa = id->npwg;
43 /* NPDG = Namespace Preferred Deallocate Granularity. 0's based */
44 id->npdg = to0based(ql->discard_granularity / ql->logical_block_size);
45 /* NPDG = Namespace Preferred Deallocate Alignment */
46 id->npda = id->npdg;
47 /* NOWS = Namespace Optimal Write Size */
48 id->nows = to0based(ql->io_opt / ql->logical_block_size);
49
50 /*Copy limits*/
51 if (ql->max_copy_sectors) {
> 52 id->mcl = cpu_to_le64((ql->max_copy_sectors << 9) / ql->logical_block_size);
> 53 id->mssrl = cpu_to_le32((ql->max_copy_range_sectors << 9) /
54 ql->logical_block_size);
> 55 id->msrc = to0based(ql->max_copy_nr_ranges);
56 } else {
57 if (ql->zoned == BLK_ZONED_NONE) {
58 id->msrc = to0based(BIO_MAX_VECS);
59 id->mssrl = cpu_to_le32(
60 (BIO_MAX_VECS << PAGE_SHIFT) / ql->logical_block_size);
> 61 id->mcl = cpu_to_le64(le32_to_cpu(id->mssrl) * BIO_MAX_VECS);
62 #ifdef CONFIG_BLK_DEV_ZONED
63 } else {
64 /* TODO: get right values for zoned device */
65 id->msrc = to0based(BIO_MAX_VECS);
66 id->mssrl = cpu_to_le32(min((BIO_MAX_VECS << PAGE_SHIFT),
67 ql->chunk_sectors) / ql->logical_block_size);
68 id->mcl = cpu_to_le64(min(le32_to_cpu(id->mssrl) * BIO_MAX_VECS,
69 ql->chunk_sectors));
70 #endif
71 }
72 }
73 }
74
---
0-DAY CI Kernel Test Service, Intel Corporation
https://lists.01.org/hyperkitty/list/kbuild-all@lists.01.org
^ permalink raw reply [flat|nested] 272+ messages in thread* Re: [PATCH v2 07/10] nvmet: add copy command support for bdev and file ns
@ 2022-02-10 8:31 ` kernel test robot
0 siblings, 0 replies; 272+ messages in thread
From: kernel test robot @ 2022-02-10 8:31 UTC (permalink / raw)
To: kbuild-all
[-- Attachment #1: Type: text/plain, Size: 10879 bytes --]
Hi Nitesh,
Thank you for the patch! Perhaps something to improve:
[auto build test WARNING on axboe-block/for-next]
[also build test WARNING on linus/master v5.17-rc3 next-20220209]
[cannot apply to device-mapper-dm/for-next]
[If your patch is applied to the wrong git tree, kindly drop us a note.
And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch]
url: https://github.com/0day-ci/linux/commits/Nitesh-Shetty/block-make-bio_map_kern-non-static/20220207-231407
base: https://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux-block.git for-next
config: arm64-randconfig-s032-20220207 (https://download.01.org/0day-ci/archive/20220210/202202101647.VtWTgalm-lkp(a)intel.com/config)
compiler: aarch64-linux-gcc (GCC) 11.2.0
reproduce:
wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
chmod +x ~/bin/make.cross
# apt-get install sparse
# sparse version: v0.6.4-dirty
# https://github.com/0day-ci/linux/commit/6bb6ea64499e1ac27975e79bb2eee89f07861893
git remote add linux-review https://github.com/0day-ci/linux
git fetch --no-tags linux-review Nitesh-Shetty/block-make-bio_map_kern-non-static/20220207-231407
git checkout 6bb6ea64499e1ac27975e79bb2eee89f07861893
# save the config file to linux build tree
mkdir build_dir
COMPILER_INSTALL_PATH=$HOME/0day COMPILER=gcc-11.2.0 make.cross C=1 CF='-fdiagnostic-prefix -D__CHECK_ENDIAN__' O=build_dir ARCH=arm64 SHELL=/bin/bash drivers/nvme/target/
If you fix the issue, kindly add following tag as appropriate
Reported-by: kernel test robot <lkp@intel.com>
sparse warnings: (new ones prefixed by >>)
>> drivers/nvme/target/io-cmd-bdev.c:52:25: sparse: sparse: incorrect type in assignment (different base types) @@ expected restricted __le32 [usertype] mcl @@ got restricted __le64 [usertype] @@
drivers/nvme/target/io-cmd-bdev.c:52:25: sparse: expected restricted __le32 [usertype] mcl
drivers/nvme/target/io-cmd-bdev.c:52:25: sparse: got restricted __le64 [usertype]
>> drivers/nvme/target/io-cmd-bdev.c:53:27: sparse: sparse: incorrect type in assignment (different base types) @@ expected restricted __le16 [usertype] mssrl @@ got restricted __le32 [usertype] @@
drivers/nvme/target/io-cmd-bdev.c:53:27: sparse: expected restricted __le16 [usertype] mssrl
drivers/nvme/target/io-cmd-bdev.c:53:27: sparse: got restricted __le32 [usertype]
>> drivers/nvme/target/io-cmd-bdev.c:55:26: sparse: sparse: incorrect type in assignment (different base types) @@ expected unsigned char [usertype] msrc @@ got restricted __le16 @@
drivers/nvme/target/io-cmd-bdev.c:55:26: sparse: expected unsigned char [usertype] msrc
drivers/nvme/target/io-cmd-bdev.c:55:26: sparse: got restricted __le16
drivers/nvme/target/io-cmd-bdev.c:58:34: sparse: sparse: incorrect type in assignment (different base types) @@ expected unsigned char [usertype] msrc @@ got restricted __le16 @@
drivers/nvme/target/io-cmd-bdev.c:58:34: sparse: expected unsigned char [usertype] msrc
drivers/nvme/target/io-cmd-bdev.c:58:34: sparse: got restricted __le16
drivers/nvme/target/io-cmd-bdev.c:59:35: sparse: sparse: incorrect type in assignment (different base types) @@ expected restricted __le16 [usertype] mssrl @@ got restricted __le32 [usertype] @@
drivers/nvme/target/io-cmd-bdev.c:59:35: sparse: expected restricted __le16 [usertype] mssrl
drivers/nvme/target/io-cmd-bdev.c:59:35: sparse: got restricted __le32 [usertype]
>> drivers/nvme/target/io-cmd-bdev.c:61:35: sparse: sparse: cast to restricted __le32
>> drivers/nvme/target/io-cmd-bdev.c:61:35: sparse: sparse: cast from restricted __le16
drivers/nvme/target/io-cmd-bdev.c:61:33: sparse: sparse: incorrect type in assignment (different base types) @@ expected restricted __le32 [usertype] mcl @@ got restricted __le64 [usertype] @@
drivers/nvme/target/io-cmd-bdev.c:61:33: sparse: expected restricted __le32 [usertype] mcl
drivers/nvme/target/io-cmd-bdev.c:61:33: sparse: got restricted __le64 [usertype]
drivers/nvme/target/io-cmd-bdev.c:65:34: sparse: sparse: incorrect type in assignment (different base types) @@ expected unsigned char [usertype] msrc @@ got restricted __le16 @@
drivers/nvme/target/io-cmd-bdev.c:65:34: sparse: expected unsigned char [usertype] msrc
drivers/nvme/target/io-cmd-bdev.c:65:34: sparse: got restricted __le16
drivers/nvme/target/io-cmd-bdev.c:66:35: sparse: sparse: incorrect type in assignment (different base types) @@ expected restricted __le16 [usertype] mssrl @@ got restricted __le32 [usertype] @@
drivers/nvme/target/io-cmd-bdev.c:66:35: sparse: expected restricted __le16 [usertype] mssrl
drivers/nvme/target/io-cmd-bdev.c:66:35: sparse: got restricted __le32 [usertype]
drivers/nvme/target/io-cmd-bdev.c:68:35: sparse: sparse: cast to restricted __le32
drivers/nvme/target/io-cmd-bdev.c:68:35: sparse: sparse: cast from restricted __le16
drivers/nvme/target/io-cmd-bdev.c:68:35: sparse: sparse: cast to restricted __le32
drivers/nvme/target/io-cmd-bdev.c:68:35: sparse: sparse: cast from restricted __le16
drivers/nvme/target/io-cmd-bdev.c:68:35: sparse: sparse: cast to restricted __le32
drivers/nvme/target/io-cmd-bdev.c:68:35: sparse: sparse: cast from restricted __le16
drivers/nvme/target/io-cmd-bdev.c:68:35: sparse: sparse: cast to restricted __le32
drivers/nvme/target/io-cmd-bdev.c:68:35: sparse: sparse: cast from restricted __le16
drivers/nvme/target/io-cmd-bdev.c:68:35: sparse: sparse: cast to restricted __le32
drivers/nvme/target/io-cmd-bdev.c:68:35: sparse: sparse: cast from restricted __le16
drivers/nvme/target/io-cmd-bdev.c:68:35: sparse: sparse: cast to restricted __le32
drivers/nvme/target/io-cmd-bdev.c:68:35: sparse: sparse: cast from restricted __le16
drivers/nvme/target/io-cmd-bdev.c:68:33: sparse: sparse: incorrect type in assignment (different base types) @@ expected restricted __le32 [usertype] mcl @@ got restricted __le64 [usertype] @@
drivers/nvme/target/io-cmd-bdev.c:68:33: sparse: expected restricted __le32 [usertype] mcl
drivers/nvme/target/io-cmd-bdev.c:68:33: sparse: got restricted __le64 [usertype]
--
>> drivers/nvme/target/admin-cmd.c:533:26: sparse: sparse: incorrect type in assignment (different base types) @@ expected unsigned char [usertype] msrc @@ got restricted __le16 @@
drivers/nvme/target/admin-cmd.c:533:26: sparse: expected unsigned char [usertype] msrc
drivers/nvme/target/admin-cmd.c:533:26: sparse: got restricted __le16
>> drivers/nvme/target/admin-cmd.c:534:27: sparse: sparse: incorrect type in assignment (different base types) @@ expected restricted __le16 [usertype] mssrl @@ got restricted __le32 [usertype] @@
drivers/nvme/target/admin-cmd.c:534:27: sparse: expected restricted __le16 [usertype] mssrl
drivers/nvme/target/admin-cmd.c:534:27: sparse: got restricted __le32 [usertype]
>> drivers/nvme/target/admin-cmd.c:535:27: sparse: sparse: cast to restricted __le32
>> drivers/nvme/target/admin-cmd.c:535:27: sparse: sparse: cast from restricted __le16
>> drivers/nvme/target/admin-cmd.c:535:25: sparse: sparse: incorrect type in assignment (different base types) @@ expected restricted __le32 [usertype] mcl @@ got restricted __le64 [usertype] @@
drivers/nvme/target/admin-cmd.c:535:25: sparse: expected restricted __le32 [usertype] mcl
drivers/nvme/target/admin-cmd.c:535:25: sparse: got restricted __le64 [usertype]
vim +52 drivers/nvme/target/io-cmd-bdev.c
11
12 void nvmet_bdev_set_limits(struct block_device *bdev, struct nvme_id_ns *id)
13 {
14 const struct queue_limits *ql = &bdev_get_queue(bdev)->limits;
15 /* Number of logical blocks per physical block. */
16 const u32 lpp = ql->physical_block_size / ql->logical_block_size;
17 /* Logical blocks per physical block, 0's based. */
18 const __le16 lpp0b = to0based(lpp);
19
20 /*
21 * For NVMe 1.2 and later, bit 1 indicates that the fields NAWUN,
22 * NAWUPF, and NACWU are defined for this namespace and should be
23 * used by the host for this namespace instead of the AWUN, AWUPF,
24 * and ACWU fields in the Identify Controller data structure. If
25 * any of these fields are zero that means that the corresponding
26 * field from the identify controller data structure should be used.
27 */
28 id->nsfeat |= 1 << 1;
29 id->nawun = lpp0b;
30 id->nawupf = lpp0b;
31 id->nacwu = lpp0b;
32
33 /*
34 * Bit 4 indicates that the fields NPWG, NPWA, NPDG, NPDA, and
35 * NOWS are defined for this namespace and should be used by
36 * the host for I/O optimization.
37 */
38 id->nsfeat |= 1 << 4;
39 /* NPWG = Namespace Preferred Write Granularity. 0's based */
40 id->npwg = lpp0b;
41 /* NPWA = Namespace Preferred Write Alignment. 0's based */
42 id->npwa = id->npwg;
43 /* NPDG = Namespace Preferred Deallocate Granularity. 0's based */
44 id->npdg = to0based(ql->discard_granularity / ql->logical_block_size);
45 /* NPDG = Namespace Preferred Deallocate Alignment */
46 id->npda = id->npdg;
47 /* NOWS = Namespace Optimal Write Size */
48 id->nows = to0based(ql->io_opt / ql->logical_block_size);
49
50 /*Copy limits*/
51 if (ql->max_copy_sectors) {
> 52 id->mcl = cpu_to_le64((ql->max_copy_sectors << 9) / ql->logical_block_size);
> 53 id->mssrl = cpu_to_le32((ql->max_copy_range_sectors << 9) /
54 ql->logical_block_size);
> 55 id->msrc = to0based(ql->max_copy_nr_ranges);
56 } else {
57 if (ql->zoned == BLK_ZONED_NONE) {
58 id->msrc = to0based(BIO_MAX_VECS);
59 id->mssrl = cpu_to_le32(
60 (BIO_MAX_VECS << PAGE_SHIFT) / ql->logical_block_size);
> 61 id->mcl = cpu_to_le64(le32_to_cpu(id->mssrl) * BIO_MAX_VECS);
62 #ifdef CONFIG_BLK_DEV_ZONED
63 } else {
64 /* TODO: get right values for zoned device */
65 id->msrc = to0based(BIO_MAX_VECS);
66 id->mssrl = cpu_to_le32(min((BIO_MAX_VECS << PAGE_SHIFT),
67 ql->chunk_sectors) / ql->logical_block_size);
68 id->mcl = cpu_to_le64(min(le32_to_cpu(id->mssrl) * BIO_MAX_VECS,
69 ql->chunk_sectors));
70 #endif
71 }
72 }
73 }
74
---
0-DAY CI Kernel Test Service, Intel Corporation
https://lists.01.org/hyperkitty/list/kbuild-all(a)lists.01.org
^ permalink raw reply [flat|nested] 272+ messages in thread* Re: [dm-devel] [PATCH v2 07/10] nvmet: add copy command support for bdev and file ns
@ 2022-02-10 8:31 ` kernel test robot
0 siblings, 0 replies; 272+ messages in thread
From: kernel test robot @ 2022-02-10 8:31 UTC (permalink / raw)
To: Nitesh Shetty, mpatocka
Cc: djwong, linux-nvme, clm, dm-devel, osandov, javier, bvanassche,
linux-scsi, hch, roland, nj.shetty, zach.brown, chaitanyak,
msnitzer, josef, linux-block, dsterba, kbusch, tytso,
Frederick.Knight, axboe, kbuild-all, joshi.k, martin.petersen,
arnav.dawn, jack, linux-fsdevel, lsf-pc
Hi Nitesh,
Thank you for the patch! Perhaps something to improve:
[auto build test WARNING on axboe-block/for-next]
[also build test WARNING on linus/master v5.17-rc3 next-20220209]
[cannot apply to device-mapper-dm/for-next]
[If your patch is applied to the wrong git tree, kindly drop us a note.
And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch]
url: https://github.com/0day-ci/linux/commits/Nitesh-Shetty/block-make-bio_map_kern-non-static/20220207-231407
base: https://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux-block.git for-next
config: arm64-randconfig-s032-20220207 (https://download.01.org/0day-ci/archive/20220210/202202101647.VtWTgalm-lkp@intel.com/config)
compiler: aarch64-linux-gcc (GCC) 11.2.0
reproduce:
wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
chmod +x ~/bin/make.cross
# apt-get install sparse
# sparse version: v0.6.4-dirty
# https://github.com/0day-ci/linux/commit/6bb6ea64499e1ac27975e79bb2eee89f07861893
git remote add linux-review https://github.com/0day-ci/linux
git fetch --no-tags linux-review Nitesh-Shetty/block-make-bio_map_kern-non-static/20220207-231407
git checkout 6bb6ea64499e1ac27975e79bb2eee89f07861893
# save the config file to linux build tree
mkdir build_dir
COMPILER_INSTALL_PATH=$HOME/0day COMPILER=gcc-11.2.0 make.cross C=1 CF='-fdiagnostic-prefix -D__CHECK_ENDIAN__' O=build_dir ARCH=arm64 SHELL=/bin/bash drivers/nvme/target/
If you fix the issue, kindly add following tag as appropriate
Reported-by: kernel test robot <lkp@intel.com>
sparse warnings: (new ones prefixed by >>)
>> drivers/nvme/target/io-cmd-bdev.c:52:25: sparse: sparse: incorrect type in assignment (different base types) @@ expected restricted __le32 [usertype] mcl @@ got restricted __le64 [usertype] @@
drivers/nvme/target/io-cmd-bdev.c:52:25: sparse: expected restricted __le32 [usertype] mcl
drivers/nvme/target/io-cmd-bdev.c:52:25: sparse: got restricted __le64 [usertype]
>> drivers/nvme/target/io-cmd-bdev.c:53:27: sparse: sparse: incorrect type in assignment (different base types) @@ expected restricted __le16 [usertype] mssrl @@ got restricted __le32 [usertype] @@
drivers/nvme/target/io-cmd-bdev.c:53:27: sparse: expected restricted __le16 [usertype] mssrl
drivers/nvme/target/io-cmd-bdev.c:53:27: sparse: got restricted __le32 [usertype]
>> drivers/nvme/target/io-cmd-bdev.c:55:26: sparse: sparse: incorrect type in assignment (different base types) @@ expected unsigned char [usertype] msrc @@ got restricted __le16 @@
drivers/nvme/target/io-cmd-bdev.c:55:26: sparse: expected unsigned char [usertype] msrc
drivers/nvme/target/io-cmd-bdev.c:55:26: sparse: got restricted __le16
drivers/nvme/target/io-cmd-bdev.c:58:34: sparse: sparse: incorrect type in assignment (different base types) @@ expected unsigned char [usertype] msrc @@ got restricted __le16 @@
drivers/nvme/target/io-cmd-bdev.c:58:34: sparse: expected unsigned char [usertype] msrc
drivers/nvme/target/io-cmd-bdev.c:58:34: sparse: got restricted __le16
drivers/nvme/target/io-cmd-bdev.c:59:35: sparse: sparse: incorrect type in assignment (different base types) @@ expected restricted __le16 [usertype] mssrl @@ got restricted __le32 [usertype] @@
drivers/nvme/target/io-cmd-bdev.c:59:35: sparse: expected restricted __le16 [usertype] mssrl
drivers/nvme/target/io-cmd-bdev.c:59:35: sparse: got restricted __le32 [usertype]
>> drivers/nvme/target/io-cmd-bdev.c:61:35: sparse: sparse: cast to restricted __le32
>> drivers/nvme/target/io-cmd-bdev.c:61:35: sparse: sparse: cast from restricted __le16
drivers/nvme/target/io-cmd-bdev.c:61:33: sparse: sparse: incorrect type in assignment (different base types) @@ expected restricted __le32 [usertype] mcl @@ got restricted __le64 [usertype] @@
drivers/nvme/target/io-cmd-bdev.c:61:33: sparse: expected restricted __le32 [usertype] mcl
drivers/nvme/target/io-cmd-bdev.c:61:33: sparse: got restricted __le64 [usertype]
drivers/nvme/target/io-cmd-bdev.c:65:34: sparse: sparse: incorrect type in assignment (different base types) @@ expected unsigned char [usertype] msrc @@ got restricted __le16 @@
drivers/nvme/target/io-cmd-bdev.c:65:34: sparse: expected unsigned char [usertype] msrc
drivers/nvme/target/io-cmd-bdev.c:65:34: sparse: got restricted __le16
drivers/nvme/target/io-cmd-bdev.c:66:35: sparse: sparse: incorrect type in assignment (different base types) @@ expected restricted __le16 [usertype] mssrl @@ got restricted __le32 [usertype] @@
drivers/nvme/target/io-cmd-bdev.c:66:35: sparse: expected restricted __le16 [usertype] mssrl
drivers/nvme/target/io-cmd-bdev.c:66:35: sparse: got restricted __le32 [usertype]
drivers/nvme/target/io-cmd-bdev.c:68:35: sparse: sparse: cast to restricted __le32
drivers/nvme/target/io-cmd-bdev.c:68:35: sparse: sparse: cast from restricted __le16
drivers/nvme/target/io-cmd-bdev.c:68:35: sparse: sparse: cast to restricted __le32
drivers/nvme/target/io-cmd-bdev.c:68:35: sparse: sparse: cast from restricted __le16
drivers/nvme/target/io-cmd-bdev.c:68:35: sparse: sparse: cast to restricted __le32
drivers/nvme/target/io-cmd-bdev.c:68:35: sparse: sparse: cast from restricted __le16
drivers/nvme/target/io-cmd-bdev.c:68:35: sparse: sparse: cast to restricted __le32
drivers/nvme/target/io-cmd-bdev.c:68:35: sparse: sparse: cast from restricted __le16
drivers/nvme/target/io-cmd-bdev.c:68:35: sparse: sparse: cast to restricted __le32
drivers/nvme/target/io-cmd-bdev.c:68:35: sparse: sparse: cast from restricted __le16
drivers/nvme/target/io-cmd-bdev.c:68:35: sparse: sparse: cast to restricted __le32
drivers/nvme/target/io-cmd-bdev.c:68:35: sparse: sparse: cast from restricted __le16
drivers/nvme/target/io-cmd-bdev.c:68:33: sparse: sparse: incorrect type in assignment (different base types) @@ expected restricted __le32 [usertype] mcl @@ got restricted __le64 [usertype] @@
drivers/nvme/target/io-cmd-bdev.c:68:33: sparse: expected restricted __le32 [usertype] mcl
drivers/nvme/target/io-cmd-bdev.c:68:33: sparse: got restricted __le64 [usertype]
--
>> drivers/nvme/target/admin-cmd.c:533:26: sparse: sparse: incorrect type in assignment (different base types) @@ expected unsigned char [usertype] msrc @@ got restricted __le16 @@
drivers/nvme/target/admin-cmd.c:533:26: sparse: expected unsigned char [usertype] msrc
drivers/nvme/target/admin-cmd.c:533:26: sparse: got restricted __le16
>> drivers/nvme/target/admin-cmd.c:534:27: sparse: sparse: incorrect type in assignment (different base types) @@ expected restricted __le16 [usertype] mssrl @@ got restricted __le32 [usertype] @@
drivers/nvme/target/admin-cmd.c:534:27: sparse: expected restricted __le16 [usertype] mssrl
drivers/nvme/target/admin-cmd.c:534:27: sparse: got restricted __le32 [usertype]
>> drivers/nvme/target/admin-cmd.c:535:27: sparse: sparse: cast to restricted __le32
>> drivers/nvme/target/admin-cmd.c:535:27: sparse: sparse: cast from restricted __le16
>> drivers/nvme/target/admin-cmd.c:535:25: sparse: sparse: incorrect type in assignment (different base types) @@ expected restricted __le32 [usertype] mcl @@ got restricted __le64 [usertype] @@
drivers/nvme/target/admin-cmd.c:535:25: sparse: expected restricted __le32 [usertype] mcl
drivers/nvme/target/admin-cmd.c:535:25: sparse: got restricted __le64 [usertype]
vim +52 drivers/nvme/target/io-cmd-bdev.c
11
12 void nvmet_bdev_set_limits(struct block_device *bdev, struct nvme_id_ns *id)
13 {
14 const struct queue_limits *ql = &bdev_get_queue(bdev)->limits;
15 /* Number of logical blocks per physical block. */
16 const u32 lpp = ql->physical_block_size / ql->logical_block_size;
17 /* Logical blocks per physical block, 0's based. */
18 const __le16 lpp0b = to0based(lpp);
19
20 /*
21 * For NVMe 1.2 and later, bit 1 indicates that the fields NAWUN,
22 * NAWUPF, and NACWU are defined for this namespace and should be
23 * used by the host for this namespace instead of the AWUN, AWUPF,
24 * and ACWU fields in the Identify Controller data structure. If
25 * any of these fields are zero that means that the corresponding
26 * field from the identify controller data structure should be used.
27 */
28 id->nsfeat |= 1 << 1;
29 id->nawun = lpp0b;
30 id->nawupf = lpp0b;
31 id->nacwu = lpp0b;
32
33 /*
34 * Bit 4 indicates that the fields NPWG, NPWA, NPDG, NPDA, and
35 * NOWS are defined for this namespace and should be used by
36 * the host for I/O optimization.
37 */
38 id->nsfeat |= 1 << 4;
39 /* NPWG = Namespace Preferred Write Granularity. 0's based */
40 id->npwg = lpp0b;
41 /* NPWA = Namespace Preferred Write Alignment. 0's based */
42 id->npwa = id->npwg;
43 /* NPDG = Namespace Preferred Deallocate Granularity. 0's based */
44 id->npdg = to0based(ql->discard_granularity / ql->logical_block_size);
45 /* NPDG = Namespace Preferred Deallocate Alignment */
46 id->npda = id->npdg;
47 /* NOWS = Namespace Optimal Write Size */
48 id->nows = to0based(ql->io_opt / ql->logical_block_size);
49
50 /*Copy limits*/
51 if (ql->max_copy_sectors) {
> 52 id->mcl = cpu_to_le64((ql->max_copy_sectors << 9) / ql->logical_block_size);
> 53 id->mssrl = cpu_to_le32((ql->max_copy_range_sectors << 9) /
54 ql->logical_block_size);
> 55 id->msrc = to0based(ql->max_copy_nr_ranges);
56 } else {
57 if (ql->zoned == BLK_ZONED_NONE) {
58 id->msrc = to0based(BIO_MAX_VECS);
59 id->mssrl = cpu_to_le32(
60 (BIO_MAX_VECS << PAGE_SHIFT) / ql->logical_block_size);
> 61 id->mcl = cpu_to_le64(le32_to_cpu(id->mssrl) * BIO_MAX_VECS);
62 #ifdef CONFIG_BLK_DEV_ZONED
63 } else {
64 /* TODO: get right values for zoned device */
65 id->msrc = to0based(BIO_MAX_VECS);
66 id->mssrl = cpu_to_le32(min((BIO_MAX_VECS << PAGE_SHIFT),
67 ql->chunk_sectors) / ql->logical_block_size);
68 id->mcl = cpu_to_le64(min(le32_to_cpu(id->mssrl) * BIO_MAX_VECS,
69 ql->chunk_sectors));
70 #endif
71 }
72 }
73 }
74
---
0-DAY CI Kernel Test Service, Intel Corporation
https://lists.01.org/hyperkitty/list/kbuild-all@lists.01.org
--
dm-devel mailing list
dm-devel@redhat.com
https://listman.redhat.com/mailman/listinfo/dm-devel
^ permalink raw reply [flat|nested] 272+ messages in thread
[parent not found: <CGME20220207141948epcas5p4534f6bdc5a1e2e676d7d09c04f8b4a5b@epcas5p4.samsung.com>]
* [PATCH v2 08/10] dm: Add support for copy offload.
[not found] ` <CGME20220207141948epcas5p4534f6bdc5a1e2e676d7d09c04f8b4a5b@epcas5p4.samsung.com>
@ 2022-02-07 14:13 ` Nitesh Shetty
0 siblings, 0 replies; 272+ messages in thread
From: Nitesh Shetty @ 2022-02-07 14:13 UTC (permalink / raw)
To: mpatocka
Cc: javier, chaitanyak, linux-block, linux-scsi, dm-devel,
linux-nvme, linux-fsdevel, axboe, msnitzer, bvanassche,
martin.petersen, roland, hare, kbusch, hch, Frederick.Knight,
zach.brown, osandov, lsf-pc, djwong, josef, clm, dsterba, tytso,
jack, joshi.k, arnav.dawn, nj.shetty
Before enabling copy for dm target, check if underlaying devices and
dm target support copy. Avoid split happening inside dm target.
Fail early if the request needs split, currently spliting copy
request is not supported
Signed-off-by: Nitesh Shetty <nj.shetty@samsung.com>
---
drivers/md/dm-table.c | 43 +++++++++++++++++++++++++++++++++++
drivers/md/dm.c | 6 +++++
include/linux/device-mapper.h | 5 ++++
3 files changed, 54 insertions(+)
diff --git a/drivers/md/dm-table.c b/drivers/md/dm-table.c
index e43096cfe9e2..cb5cdaf1d8b9 100644
--- a/drivers/md/dm-table.c
+++ b/drivers/md/dm-table.c
@@ -1903,6 +1903,39 @@ static bool dm_table_supports_nowait(struct dm_table *t)
return true;
}
+static int device_not_copy_capable(struct dm_target *ti, struct dm_dev *dev,
+ sector_t start, sector_t len, void *data)
+{
+ struct request_queue *q = bdev_get_queue(dev->bdev);
+
+ return !blk_queue_copy(q);
+}
+
+static bool dm_table_supports_copy(struct dm_table *t)
+{
+ struct dm_target *ti;
+ unsigned int i;
+
+ for (i = 0; i < dm_table_get_num_targets(t); i++) {
+ ti = dm_table_get_target(t, i);
+
+ if (!ti->copy_supported)
+ return false;
+
+ /*
+ * Either the target provides copy support (as implied by setting
+ * 'copy_supported') or it relies on _all_ data devices having
+ * discard support.
+ */
+ if (!ti->copy_supported &&
+ (!ti->type->iterate_devices ||
+ ti->type->iterate_devices(ti, device_not_copy_capable, NULL)))
+ return false;
+ }
+
+ return true;
+}
+
static int device_not_discard_capable(struct dm_target *ti, struct dm_dev *dev,
sector_t start, sector_t len, void *data)
{
@@ -2000,6 +2033,16 @@ int dm_table_set_restrictions(struct dm_table *t, struct request_queue *q,
} else
blk_queue_flag_set(QUEUE_FLAG_DISCARD, q);
+ if (!dm_table_supports_copy(t)) {
+ blk_queue_flag_clear(QUEUE_FLAG_COPY, q);
+ /* Must also clear discard limits... */
+ q->limits.max_copy_sectors = 0;
+ q->limits.max_copy_range_sectors = 0;
+ q->limits.max_copy_nr_ranges = 0;
+ } else {
+ blk_queue_flag_set(QUEUE_FLAG_COPY, q);
+ }
+
if (dm_table_supports_secure_erase(t))
blk_queue_flag_set(QUEUE_FLAG_SECERASE, q);
diff --git a/drivers/md/dm.c b/drivers/md/dm.c
index fa596b654c99..2a6d55722139 100644
--- a/drivers/md/dm.c
+++ b/drivers/md/dm.c
@@ -1420,6 +1420,12 @@ static int __split_and_process_non_flush(struct clone_info *ci)
if (__process_abnormal_io(ci, ti, &r))
return r;
+ if ((unlikely(op_is_copy(ci->bio->bi_opf)) &&
+ max_io_len(ti, ci->sector) < ci->sector_count)) {
+ DMERR("%s: Error IO size(%u) is greater than maximum target size(%llu)\n",
+ __func__, ci->sector_count, max_io_len(ti, ci->sector));
+ return -EIO;
+ }
len = min_t(sector_t, max_io_len(ti, ci->sector), ci->sector_count);
r = __clone_and_map_data_bio(ci, ti, ci->sector, &len);
diff --git a/include/linux/device-mapper.h b/include/linux/device-mapper.h
index b26fecf6c8e8..acfd4018125a 100644
--- a/include/linux/device-mapper.h
+++ b/include/linux/device-mapper.h
@@ -362,6 +362,11 @@ struct dm_target {
* zone append operations using regular writes.
*/
bool emulate_zone_append:1;
+
+ /*
+ * copy offload is supported
+ */
+ bool copy_supported:1;
};
void *dm_per_bio_data(struct bio *bio, size_t data_size);
--
2.30.0-rc0
^ permalink raw reply related [flat|nested] 272+ messages in thread* [dm-devel] [PATCH v2 08/10] dm: Add support for copy offload.
@ 2022-02-07 14:13 ` Nitesh Shetty
0 siblings, 0 replies; 272+ messages in thread
From: Nitesh Shetty @ 2022-02-07 14:13 UTC (permalink / raw)
To: mpatocka
Cc: djwong, linux-nvme, clm, dm-devel, osandov, javier, bvanassche,
linux-scsi, hch, roland, nj.shetty, zach.brown, chaitanyak,
msnitzer, josef, linux-block, dsterba, kbusch, Frederick.Knight,
axboe, tytso, joshi.k, martin.petersen, arnav.dawn, jack,
linux-fsdevel, lsf-pc
Before enabling copy for dm target, check if underlaying devices and
dm target support copy. Avoid split happening inside dm target.
Fail early if the request needs split, currently spliting copy
request is not supported
Signed-off-by: Nitesh Shetty <nj.shetty@samsung.com>
---
drivers/md/dm-table.c | 43 +++++++++++++++++++++++++++++++++++
drivers/md/dm.c | 6 +++++
include/linux/device-mapper.h | 5 ++++
3 files changed, 54 insertions(+)
diff --git a/drivers/md/dm-table.c b/drivers/md/dm-table.c
index e43096cfe9e2..cb5cdaf1d8b9 100644
--- a/drivers/md/dm-table.c
+++ b/drivers/md/dm-table.c
@@ -1903,6 +1903,39 @@ static bool dm_table_supports_nowait(struct dm_table *t)
return true;
}
+static int device_not_copy_capable(struct dm_target *ti, struct dm_dev *dev,
+ sector_t start, sector_t len, void *data)
+{
+ struct request_queue *q = bdev_get_queue(dev->bdev);
+
+ return !blk_queue_copy(q);
+}
+
+static bool dm_table_supports_copy(struct dm_table *t)
+{
+ struct dm_target *ti;
+ unsigned int i;
+
+ for (i = 0; i < dm_table_get_num_targets(t); i++) {
+ ti = dm_table_get_target(t, i);
+
+ if (!ti->copy_supported)
+ return false;
+
+ /*
+ * Either the target provides copy support (as implied by setting
+ * 'copy_supported') or it relies on _all_ data devices having
+ * discard support.
+ */
+ if (!ti->copy_supported &&
+ (!ti->type->iterate_devices ||
+ ti->type->iterate_devices(ti, device_not_copy_capable, NULL)))
+ return false;
+ }
+
+ return true;
+}
+
static int device_not_discard_capable(struct dm_target *ti, struct dm_dev *dev,
sector_t start, sector_t len, void *data)
{
@@ -2000,6 +2033,16 @@ int dm_table_set_restrictions(struct dm_table *t, struct request_queue *q,
} else
blk_queue_flag_set(QUEUE_FLAG_DISCARD, q);
+ if (!dm_table_supports_copy(t)) {
+ blk_queue_flag_clear(QUEUE_FLAG_COPY, q);
+ /* Must also clear discard limits... */
+ q->limits.max_copy_sectors = 0;
+ q->limits.max_copy_range_sectors = 0;
+ q->limits.max_copy_nr_ranges = 0;
+ } else {
+ blk_queue_flag_set(QUEUE_FLAG_COPY, q);
+ }
+
if (dm_table_supports_secure_erase(t))
blk_queue_flag_set(QUEUE_FLAG_SECERASE, q);
diff --git a/drivers/md/dm.c b/drivers/md/dm.c
index fa596b654c99..2a6d55722139 100644
--- a/drivers/md/dm.c
+++ b/drivers/md/dm.c
@@ -1420,6 +1420,12 @@ static int __split_and_process_non_flush(struct clone_info *ci)
if (__process_abnormal_io(ci, ti, &r))
return r;
+ if ((unlikely(op_is_copy(ci->bio->bi_opf)) &&
+ max_io_len(ti, ci->sector) < ci->sector_count)) {
+ DMERR("%s: Error IO size(%u) is greater than maximum target size(%llu)\n",
+ __func__, ci->sector_count, max_io_len(ti, ci->sector));
+ return -EIO;
+ }
len = min_t(sector_t, max_io_len(ti, ci->sector), ci->sector_count);
r = __clone_and_map_data_bio(ci, ti, ci->sector, &len);
diff --git a/include/linux/device-mapper.h b/include/linux/device-mapper.h
index b26fecf6c8e8..acfd4018125a 100644
--- a/include/linux/device-mapper.h
+++ b/include/linux/device-mapper.h
@@ -362,6 +362,11 @@ struct dm_target {
* zone append operations using regular writes.
*/
bool emulate_zone_append:1;
+
+ /*
+ * copy offload is supported
+ */
+ bool copy_supported:1;
};
void *dm_per_bio_data(struct bio *bio, size_t data_size);
--
2.30.0-rc0
--
dm-devel mailing list
dm-devel@redhat.com
https://listman.redhat.com/mailman/listinfo/dm-devel
^ permalink raw reply related [flat|nested] 272+ messages in thread* Re: [PATCH v2 08/10] dm: Add support for copy offload.
2022-02-07 14:13 ` [dm-devel] " Nitesh Shetty
@ 2022-02-16 13:51 ` Mikulas Patocka
-1 siblings, 0 replies; 272+ messages in thread
From: Mikulas Patocka @ 2022-02-16 13:51 UTC (permalink / raw)
To: Nitesh Shetty
Cc: javier, chaitanyak, linux-block, linux-scsi, dm-devel,
linux-nvme, linux-fsdevel, axboe, msnitzer, bvanassche,
martin.petersen, roland, hare, kbusch, hch, Frederick.Knight,
zach.brown, osandov, lsf-pc, djwong, josef, clm, dsterba, tytso,
jack, joshi.k, arnav.dawn
On Mon, 7 Feb 2022, Nitesh Shetty wrote:
> Before enabling copy for dm target, check if underlaying devices and
> dm target support copy. Avoid split happening inside dm target.
> Fail early if the request needs split, currently spliting copy
> request is not supported
>
> Signed-off-by: Nitesh Shetty <nj.shetty@samsung.com>
If a dm device is reconfigured, you must invalidate all the copy tokens
that are in flight, otherwise they would copy stale data.
I suggest that you create a global variable "atomic64_t dm_changed".
In nvme_setup_copy_read you copy this variable to the token.
In nvme_setup_copy_write you compare the variable with the value in the
token and fail if there is mismatch.
In dm.c:__bind you increase the variable, so that all the tokens will be
invalidated if a dm table is changed.
Mikulas
^ permalink raw reply [flat|nested] 272+ messages in thread
* Re: [dm-devel] [PATCH v2 08/10] dm: Add support for copy offload.
@ 2022-02-16 13:51 ` Mikulas Patocka
0 siblings, 0 replies; 272+ messages in thread
From: Mikulas Patocka @ 2022-02-16 13:51 UTC (permalink / raw)
To: Nitesh Shetty
Cc: djwong, linux-nvme, clm, dm-devel, osandov, javier, bvanassche,
linux-scsi, hch, roland, zach.brown, chaitanyak, msnitzer, josef,
linux-block, dsterba, kbusch, Frederick.Knight, axboe, tytso,
joshi.k, martin.petersen, arnav.dawn, jack, linux-fsdevel,
lsf-pc
On Mon, 7 Feb 2022, Nitesh Shetty wrote:
> Before enabling copy for dm target, check if underlaying devices and
> dm target support copy. Avoid split happening inside dm target.
> Fail early if the request needs split, currently spliting copy
> request is not supported
>
> Signed-off-by: Nitesh Shetty <nj.shetty@samsung.com>
If a dm device is reconfigured, you must invalidate all the copy tokens
that are in flight, otherwise they would copy stale data.
I suggest that you create a global variable "atomic64_t dm_changed".
In nvme_setup_copy_read you copy this variable to the token.
In nvme_setup_copy_write you compare the variable with the value in the
token and fail if there is mismatch.
In dm.c:__bind you increase the variable, so that all the tokens will be
invalidated if a dm table is changed.
Mikulas
--
dm-devel mailing list
dm-devel@redhat.com
https://listman.redhat.com/mailman/listinfo/dm-devel
^ permalink raw reply [flat|nested] 272+ messages in thread
* Re: [PATCH v2 08/10] dm: Add support for copy offload.
2022-02-16 13:51 ` [dm-devel] " Mikulas Patocka
@ 2022-02-24 12:42 ` Nitesh Shetty
-1 siblings, 0 replies; 272+ messages in thread
From: Nitesh Shetty @ 2022-02-24 12:42 UTC (permalink / raw)
To: Mikulas Patocka
Cc: javier, chaitanyak, linux-block, linux-scsi, dm-devel,
linux-nvme, linux-fsdevel, axboe, msnitzer, bvanassche,
martin.petersen, roland, hare, kbusch, hch, Frederick.Knight,
zach.brown, osandov, lsf-pc, djwong, josef, clm, dsterba, tytso,
jack, joshi.k, arnav.dawn
[-- Attachment #1: Type: text/plain, Size: 1169 bytes --]
On Wed, Feb 16, 2022 at 08:51:08AM -0500, Mikulas Patocka wrote:
>
>
> On Mon, 7 Feb 2022, Nitesh Shetty wrote:
>
> > Before enabling copy for dm target, check if underlaying devices and
> > dm target support copy. Avoid split happening inside dm target.
> > Fail early if the request needs split, currently spliting copy
> > request is not supported
> >
> > Signed-off-by: Nitesh Shetty <nj.shetty@samsung.com>
>
> If a dm device is reconfigured, you must invalidate all the copy tokens
> that are in flight, otherwise they would copy stale data.
>
> I suggest that you create a global variable "atomic64_t dm_changed".
> In nvme_setup_copy_read you copy this variable to the token.
> In nvme_setup_copy_write you compare the variable with the value in the
> token and fail if there is mismatch.
> In dm.c:__bind you increase the variable, so that all the tokens will be
> invalidated if a dm table is changed.
>
> Mikulas
>
>
Yes, you are right about the reconfiguration of dm device. But wouldn't having a
single global counter(dm_changed), will invalidate for all in-flight copy IO's
across all dm devices. Is my understanding correct?
--
Nitesh Shetty
[-- Attachment #2: Type: text/plain, Size: 0 bytes --]
^ permalink raw reply [flat|nested] 272+ messages in thread
* Re: [dm-devel] [PATCH v2 08/10] dm: Add support for copy offload.
@ 2022-02-24 12:42 ` Nitesh Shetty
0 siblings, 0 replies; 272+ messages in thread
From: Nitesh Shetty @ 2022-02-24 12:42 UTC (permalink / raw)
To: Mikulas Patocka
Cc: djwong, linux-nvme, clm, dm-devel, osandov, javier, bvanassche,
linux-scsi, hch, roland, zach.brown, chaitanyak, msnitzer, josef,
linux-block, dsterba, kbusch, Frederick.Knight, axboe, tytso,
joshi.k, martin.petersen, arnav.dawn, jack, linux-fsdevel,
lsf-pc
[-- Attachment #1: Type: text/plain, Size: 1169 bytes --]
On Wed, Feb 16, 2022 at 08:51:08AM -0500, Mikulas Patocka wrote:
>
>
> On Mon, 7 Feb 2022, Nitesh Shetty wrote:
>
> > Before enabling copy for dm target, check if underlaying devices and
> > dm target support copy. Avoid split happening inside dm target.
> > Fail early if the request needs split, currently spliting copy
> > request is not supported
> >
> > Signed-off-by: Nitesh Shetty <nj.shetty@samsung.com>
>
> If a dm device is reconfigured, you must invalidate all the copy tokens
> that are in flight, otherwise they would copy stale data.
>
> I suggest that you create a global variable "atomic64_t dm_changed".
> In nvme_setup_copy_read you copy this variable to the token.
> In nvme_setup_copy_write you compare the variable with the value in the
> token and fail if there is mismatch.
> In dm.c:__bind you increase the variable, so that all the tokens will be
> invalidated if a dm table is changed.
>
> Mikulas
>
>
Yes, you are right about the reconfiguration of dm device. But wouldn't having a
single global counter(dm_changed), will invalidate for all in-flight copy IO's
across all dm devices. Is my understanding correct?
--
Nitesh Shetty
[-- Attachment #2: Type: text/plain, Size: 0 bytes --]
[-- Attachment #3: Type: text/plain, Size: 97 bytes --]
--
dm-devel mailing list
dm-devel@redhat.com
https://listman.redhat.com/mailman/listinfo/dm-devel
^ permalink raw reply [flat|nested] 272+ messages in thread
* Re: [PATCH v2 08/10] dm: Add support for copy offload.
2022-02-24 12:42 ` [dm-devel] " Nitesh Shetty
@ 2022-02-25 9:12 ` Mikulas Patocka
-1 siblings, 0 replies; 272+ messages in thread
From: Mikulas Patocka @ 2022-02-25 9:12 UTC (permalink / raw)
To: Nitesh Shetty
Cc: javier, chaitanyak, linux-block, linux-scsi, dm-devel,
linux-nvme, linux-fsdevel, axboe, msnitzer, bvanassche,
martin.petersen, roland, hare, kbusch, hch, Frederick.Knight,
zach.brown, osandov, lsf-pc, djwong, josef, clm, dsterba, tytso,
jack, joshi.k, arnav.dawn
On Thu, 24 Feb 2022, Nitesh Shetty wrote:
> On Wed, Feb 16, 2022 at 08:51:08AM -0500, Mikulas Patocka wrote:
> >
> >
> > On Mon, 7 Feb 2022, Nitesh Shetty wrote:
> >
> > > Before enabling copy for dm target, check if underlaying devices and
> > > dm target support copy. Avoid split happening inside dm target.
> > > Fail early if the request needs split, currently spliting copy
> > > request is not supported
> > >
> > > Signed-off-by: Nitesh Shetty <nj.shetty@samsung.com>
> >
> > If a dm device is reconfigured, you must invalidate all the copy tokens
> > that are in flight, otherwise they would copy stale data.
> >
> > I suggest that you create a global variable "atomic64_t dm_changed".
> > In nvme_setup_copy_read you copy this variable to the token.
> > In nvme_setup_copy_write you compare the variable with the value in the
> > token and fail if there is mismatch.
> > In dm.c:__bind you increase the variable, so that all the tokens will be
> > invalidated if a dm table is changed.
> >
> > Mikulas
> >
> >
> Yes, you are right about the reconfiguration of dm device. But wouldn't having a
> single global counter(dm_changed), will invalidate for all in-flight copy IO's
> across all dm devices. Is my understanding correct?
>
> --
> Nitesh Shetty
Yes, changing it will invalidate all the copy IO's.
But invalidating only IO's affected by the table reload would be hard to
achieve.
Mikulas
^ permalink raw reply [flat|nested] 272+ messages in thread
* Re: [dm-devel] [PATCH v2 08/10] dm: Add support for copy offload.
@ 2022-02-25 9:12 ` Mikulas Patocka
0 siblings, 0 replies; 272+ messages in thread
From: Mikulas Patocka @ 2022-02-25 9:12 UTC (permalink / raw)
To: Nitesh Shetty
Cc: djwong, linux-nvme, clm, dm-devel, osandov, javier, bvanassche,
linux-scsi, hch, roland, zach.brown, chaitanyak, msnitzer, josef,
linux-block, dsterba, kbusch, Frederick.Knight, axboe, tytso,
joshi.k, martin.petersen, arnav.dawn, jack, linux-fsdevel,
lsf-pc
On Thu, 24 Feb 2022, Nitesh Shetty wrote:
> On Wed, Feb 16, 2022 at 08:51:08AM -0500, Mikulas Patocka wrote:
> >
> >
> > On Mon, 7 Feb 2022, Nitesh Shetty wrote:
> >
> > > Before enabling copy for dm target, check if underlaying devices and
> > > dm target support copy. Avoid split happening inside dm target.
> > > Fail early if the request needs split, currently spliting copy
> > > request is not supported
> > >
> > > Signed-off-by: Nitesh Shetty <nj.shetty@samsung.com>
> >
> > If a dm device is reconfigured, you must invalidate all the copy tokens
> > that are in flight, otherwise they would copy stale data.
> >
> > I suggest that you create a global variable "atomic64_t dm_changed".
> > In nvme_setup_copy_read you copy this variable to the token.
> > In nvme_setup_copy_write you compare the variable with the value in the
> > token and fail if there is mismatch.
> > In dm.c:__bind you increase the variable, so that all the tokens will be
> > invalidated if a dm table is changed.
> >
> > Mikulas
> >
> >
> Yes, you are right about the reconfiguration of dm device. But wouldn't having a
> single global counter(dm_changed), will invalidate for all in-flight copy IO's
> across all dm devices. Is my understanding correct?
>
> --
> Nitesh Shetty
Yes, changing it will invalidate all the copy IO's.
But invalidating only IO's affected by the table reload would be hard to
achieve.
Mikulas
--
dm-devel mailing list
dm-devel@redhat.com
https://listman.redhat.com/mailman/listinfo/dm-devel
^ permalink raw reply [flat|nested] 272+ messages in thread
[parent not found: <CGME20220207141953epcas5p32ccc3c0bbe642cea074edefcc32302a5@epcas5p3.samsung.com>]
* [PATCH v2 09/10] dm: Enable copy offload for dm-linear target
[not found] ` <CGME20220207141953epcas5p32ccc3c0bbe642cea074edefcc32302a5@epcas5p3.samsung.com>
@ 2022-02-07 14:13 ` Nitesh Shetty
0 siblings, 0 replies; 272+ messages in thread
From: Nitesh Shetty @ 2022-02-07 14:13 UTC (permalink / raw)
To: mpatocka
Cc: javier, chaitanyak, linux-block, linux-scsi, dm-devel,
linux-nvme, linux-fsdevel, axboe, msnitzer, bvanassche,
martin.petersen, roland, hare, kbusch, hch, Frederick.Knight,
zach.brown, osandov, lsf-pc, djwong, josef, clm, dsterba, tytso,
jack, joshi.k, arnav.dawn, nj.shetty
Setting copy_supported flag to enable offload.
Signed-off-by: Nitesh Shetty <nj.shetty@samsung.com>
---
drivers/md/dm-linear.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/md/dm-linear.c b/drivers/md/dm-linear.c
index 1b97a11d7151..8910728bc8df 100644
--- a/drivers/md/dm-linear.c
+++ b/drivers/md/dm-linear.c
@@ -62,6 +62,7 @@ static int linear_ctr(struct dm_target *ti, unsigned int argc, char **argv)
ti->num_secure_erase_bios = 1;
ti->num_write_same_bios = 1;
ti->num_write_zeroes_bios = 1;
+ ti->copy_supported = 1;
ti->private = lc;
return 0;
--
2.30.0-rc0
^ permalink raw reply related [flat|nested] 272+ messages in thread* [dm-devel] [PATCH v2 09/10] dm: Enable copy offload for dm-linear target
@ 2022-02-07 14:13 ` Nitesh Shetty
0 siblings, 0 replies; 272+ messages in thread
From: Nitesh Shetty @ 2022-02-07 14:13 UTC (permalink / raw)
To: mpatocka
Cc: djwong, linux-nvme, clm, dm-devel, osandov, javier, bvanassche,
linux-scsi, hch, roland, nj.shetty, zach.brown, chaitanyak,
msnitzer, josef, linux-block, dsterba, kbusch, Frederick.Knight,
axboe, tytso, joshi.k, martin.petersen, arnav.dawn, jack,
linux-fsdevel, lsf-pc
Setting copy_supported flag to enable offload.
Signed-off-by: Nitesh Shetty <nj.shetty@samsung.com>
---
drivers/md/dm-linear.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/md/dm-linear.c b/drivers/md/dm-linear.c
index 1b97a11d7151..8910728bc8df 100644
--- a/drivers/md/dm-linear.c
+++ b/drivers/md/dm-linear.c
@@ -62,6 +62,7 @@ static int linear_ctr(struct dm_target *ti, unsigned int argc, char **argv)
ti->num_secure_erase_bios = 1;
ti->num_write_same_bios = 1;
ti->num_write_zeroes_bios = 1;
+ ti->copy_supported = 1;
ti->private = lc;
return 0;
--
2.30.0-rc0
--
dm-devel mailing list
dm-devel@redhat.com
https://listman.redhat.com/mailman/listinfo/dm-devel
^ permalink raw reply related [flat|nested] 272+ messages in thread
[parent not found: <CGME20220207141958epcas5p25f1cd06726217696d13c2dfbea010565@epcas5p2.samsung.com>]
* [PATCH v2 10/10] dm kcopyd: use copy offload support
[not found] ` <CGME20220207141958epcas5p25f1cd06726217696d13c2dfbea010565@epcas5p2.samsung.com>
@ 2022-02-07 14:13 ` Nitesh Shetty
0 siblings, 0 replies; 272+ messages in thread
From: Nitesh Shetty @ 2022-02-07 14:13 UTC (permalink / raw)
To: mpatocka
Cc: javier, chaitanyak, linux-block, linux-scsi, dm-devel,
linux-nvme, linux-fsdevel, axboe, msnitzer, bvanassche,
martin.petersen, roland, hare, kbusch, hch, Frederick.Knight,
zach.brown, osandov, lsf-pc, djwong, josef, clm, dsterba, tytso,
jack, joshi.k, arnav.dawn, nj.shetty, SelvaKumar S
From: SelvaKumar S <selvakuma.s1@samsung.com>
Introduce copy_jobs to use copy-offload, if supported by underlying devices
otherwise fall back to existing method.
run_copy_jobs() calls block layer copy offload API, if both source and
destination request queue are same and support copy offload.
On successful completion, destination regions copied count is made zero,
failed regions are processed via existing method.
Signed-off-by: SelvaKumar S <selvakuma.s1@samsung.com>
Signed-off-by: Nitesh Shetty <nj.shetty@samsung.com>
---
drivers/md/dm-kcopyd.c | 57 +++++++++++++++++++++++++++++++++++++-----
1 file changed, 51 insertions(+), 6 deletions(-)
diff --git a/drivers/md/dm-kcopyd.c b/drivers/md/dm-kcopyd.c
index 37b03ab7e5c9..64f17cc7b069 100644
--- a/drivers/md/dm-kcopyd.c
+++ b/drivers/md/dm-kcopyd.c
@@ -74,18 +74,20 @@ struct dm_kcopyd_client {
atomic_t nr_jobs;
/*
- * We maintain four lists of jobs:
+ * We maintain five lists of jobs:
*
- * i) jobs waiting for pages
- * ii) jobs that have pages, and are waiting for the io to be issued.
- * iii) jobs that don't need to do any IO and just run a callback
- * iv) jobs that have completed.
+ * i) jobs waiting to try copy offload
+ * ii) jobs waiting for pages
+ * iii) jobs that have pages, and are waiting for the io to be issued.
+ * iv) jobs that don't need to do any IO and just run a callback
+ * v) jobs that have completed.
*
- * All four of these are protected by job_lock.
+ * All five of these are protected by job_lock.
*/
spinlock_t job_lock;
struct list_head callback_jobs;
struct list_head complete_jobs;
+ struct list_head copy_jobs;
struct list_head io_jobs;
struct list_head pages_jobs;
};
@@ -579,6 +581,44 @@ static int run_io_job(struct kcopyd_job *job)
return r;
}
+static int run_copy_job(struct kcopyd_job *job)
+{
+ int r, i, count = 0;
+ unsigned long flags = 0;
+ struct range_entry range;
+
+ struct request_queue *src_q, *dest_q;
+
+ for (i = 0; i < job->num_dests; i++) {
+ range.dst = job->dests[i].sector << SECTOR_SHIFT;
+ range.src = job->source.sector << SECTOR_SHIFT;
+ range.len = job->source.count << SECTOR_SHIFT;
+
+ src_q = bdev_get_queue(job->source.bdev);
+ dest_q = bdev_get_queue(job->dests[i].bdev);
+
+ if (src_q != dest_q && !src_q->limits.copy_offload)
+ break;
+
+ r = blkdev_issue_copy(job->source.bdev, 1, &range,
+ job->dests[i].bdev, GFP_KERNEL, flags);
+ if (r)
+ break;
+
+ job->dests[i].count = 0;
+ count++;
+ }
+
+ if (count == job->num_dests) {
+ push(&job->kc->complete_jobs, job);
+ } else {
+ push(&job->kc->pages_jobs, job);
+ r = 0;
+ }
+
+ return r;
+}
+
static int run_pages_job(struct kcopyd_job *job)
{
int r;
@@ -659,6 +699,7 @@ static void do_work(struct work_struct *work)
spin_unlock_irq(&kc->job_lock);
blk_start_plug(&plug);
+ process_jobs(&kc->copy_jobs, kc, run_copy_job);
process_jobs(&kc->complete_jobs, kc, run_complete_job);
process_jobs(&kc->pages_jobs, kc, run_pages_job);
process_jobs(&kc->io_jobs, kc, run_io_job);
@@ -676,6 +717,8 @@ static void dispatch_job(struct kcopyd_job *job)
atomic_inc(&kc->nr_jobs);
if (unlikely(!job->source.count))
push(&kc->callback_jobs, job);
+ else if (job->source.bdev->bd_disk == job->dests[0].bdev->bd_disk)
+ push(&kc->copy_jobs, job);
else if (job->pages == &zero_page_list)
push(&kc->io_jobs, job);
else
@@ -916,6 +959,7 @@ struct dm_kcopyd_client *dm_kcopyd_client_create(struct dm_kcopyd_throttle *thro
spin_lock_init(&kc->job_lock);
INIT_LIST_HEAD(&kc->callback_jobs);
INIT_LIST_HEAD(&kc->complete_jobs);
+ INIT_LIST_HEAD(&kc->copy_jobs);
INIT_LIST_HEAD(&kc->io_jobs);
INIT_LIST_HEAD(&kc->pages_jobs);
kc->throttle = throttle;
@@ -971,6 +1015,7 @@ void dm_kcopyd_client_destroy(struct dm_kcopyd_client *kc)
BUG_ON(!list_empty(&kc->callback_jobs));
BUG_ON(!list_empty(&kc->complete_jobs));
+ WARN_ON(!list_empty(&kc->copy_jobs));
BUG_ON(!list_empty(&kc->io_jobs));
BUG_ON(!list_empty(&kc->pages_jobs));
destroy_workqueue(kc->kcopyd_wq);
--
2.30.0-rc0
^ permalink raw reply related [flat|nested] 272+ messages in thread* [dm-devel] [PATCH v2 10/10] dm kcopyd: use copy offload support
@ 2022-02-07 14:13 ` Nitesh Shetty
0 siblings, 0 replies; 272+ messages in thread
From: Nitesh Shetty @ 2022-02-07 14:13 UTC (permalink / raw)
To: mpatocka
Cc: djwong, linux-nvme, clm, dm-devel, osandov, javier, bvanassche,
linux-scsi, hch, roland, nj.shetty, zach.brown, chaitanyak,
SelvaKumar S, msnitzer, josef, linux-block, dsterba, kbusch,
Frederick.Knight, axboe, tytso, joshi.k, martin.petersen,
arnav.dawn, jack, linux-fsdevel, lsf-pc
From: SelvaKumar S <selvakuma.s1@samsung.com>
Introduce copy_jobs to use copy-offload, if supported by underlying devices
otherwise fall back to existing method.
run_copy_jobs() calls block layer copy offload API, if both source and
destination request queue are same and support copy offload.
On successful completion, destination regions copied count is made zero,
failed regions are processed via existing method.
Signed-off-by: SelvaKumar S <selvakuma.s1@samsung.com>
Signed-off-by: Nitesh Shetty <nj.shetty@samsung.com>
---
drivers/md/dm-kcopyd.c | 57 +++++++++++++++++++++++++++++++++++++-----
1 file changed, 51 insertions(+), 6 deletions(-)
diff --git a/drivers/md/dm-kcopyd.c b/drivers/md/dm-kcopyd.c
index 37b03ab7e5c9..64f17cc7b069 100644
--- a/drivers/md/dm-kcopyd.c
+++ b/drivers/md/dm-kcopyd.c
@@ -74,18 +74,20 @@ struct dm_kcopyd_client {
atomic_t nr_jobs;
/*
- * We maintain four lists of jobs:
+ * We maintain five lists of jobs:
*
- * i) jobs waiting for pages
- * ii) jobs that have pages, and are waiting for the io to be issued.
- * iii) jobs that don't need to do any IO and just run a callback
- * iv) jobs that have completed.
+ * i) jobs waiting to try copy offload
+ * ii) jobs waiting for pages
+ * iii) jobs that have pages, and are waiting for the io to be issued.
+ * iv) jobs that don't need to do any IO and just run a callback
+ * v) jobs that have completed.
*
- * All four of these are protected by job_lock.
+ * All five of these are protected by job_lock.
*/
spinlock_t job_lock;
struct list_head callback_jobs;
struct list_head complete_jobs;
+ struct list_head copy_jobs;
struct list_head io_jobs;
struct list_head pages_jobs;
};
@@ -579,6 +581,44 @@ static int run_io_job(struct kcopyd_job *job)
return r;
}
+static int run_copy_job(struct kcopyd_job *job)
+{
+ int r, i, count = 0;
+ unsigned long flags = 0;
+ struct range_entry range;
+
+ struct request_queue *src_q, *dest_q;
+
+ for (i = 0; i < job->num_dests; i++) {
+ range.dst = job->dests[i].sector << SECTOR_SHIFT;
+ range.src = job->source.sector << SECTOR_SHIFT;
+ range.len = job->source.count << SECTOR_SHIFT;
+
+ src_q = bdev_get_queue(job->source.bdev);
+ dest_q = bdev_get_queue(job->dests[i].bdev);
+
+ if (src_q != dest_q && !src_q->limits.copy_offload)
+ break;
+
+ r = blkdev_issue_copy(job->source.bdev, 1, &range,
+ job->dests[i].bdev, GFP_KERNEL, flags);
+ if (r)
+ break;
+
+ job->dests[i].count = 0;
+ count++;
+ }
+
+ if (count == job->num_dests) {
+ push(&job->kc->complete_jobs, job);
+ } else {
+ push(&job->kc->pages_jobs, job);
+ r = 0;
+ }
+
+ return r;
+}
+
static int run_pages_job(struct kcopyd_job *job)
{
int r;
@@ -659,6 +699,7 @@ static void do_work(struct work_struct *work)
spin_unlock_irq(&kc->job_lock);
blk_start_plug(&plug);
+ process_jobs(&kc->copy_jobs, kc, run_copy_job);
process_jobs(&kc->complete_jobs, kc, run_complete_job);
process_jobs(&kc->pages_jobs, kc, run_pages_job);
process_jobs(&kc->io_jobs, kc, run_io_job);
@@ -676,6 +717,8 @@ static void dispatch_job(struct kcopyd_job *job)
atomic_inc(&kc->nr_jobs);
if (unlikely(!job->source.count))
push(&kc->callback_jobs, job);
+ else if (job->source.bdev->bd_disk == job->dests[0].bdev->bd_disk)
+ push(&kc->copy_jobs, job);
else if (job->pages == &zero_page_list)
push(&kc->io_jobs, job);
else
@@ -916,6 +959,7 @@ struct dm_kcopyd_client *dm_kcopyd_client_create(struct dm_kcopyd_throttle *thro
spin_lock_init(&kc->job_lock);
INIT_LIST_HEAD(&kc->callback_jobs);
INIT_LIST_HEAD(&kc->complete_jobs);
+ INIT_LIST_HEAD(&kc->copy_jobs);
INIT_LIST_HEAD(&kc->io_jobs);
INIT_LIST_HEAD(&kc->pages_jobs);
kc->throttle = throttle;
@@ -971,6 +1015,7 @@ void dm_kcopyd_client_destroy(struct dm_kcopyd_client *kc)
BUG_ON(!list_empty(&kc->callback_jobs));
BUG_ON(!list_empty(&kc->complete_jobs));
+ WARN_ON(!list_empty(&kc->copy_jobs));
BUG_ON(!list_empty(&kc->io_jobs));
BUG_ON(!list_empty(&kc->pages_jobs));
destroy_workqueue(kc->kcopyd_wq);
--
2.30.0-rc0
--
dm-devel mailing list
dm-devel@redhat.com
https://listman.redhat.com/mailman/listinfo/dm-devel
^ permalink raw reply related [flat|nested] 272+ messages in thread