All of lore.kernel.org
 help / color / mirror / Atom feed
From: Meelis Roos <mroos@ut.ee>
To: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: linux-alpha@vger.kernel.org,
	Linux Kernel list <linux-kernel@vger.kernel.org>,
	linux-pci@vger.kernel.org
Subject: Re: alpha boot hang - 4.14-rc* regression
Date: Wed, 25 Oct 2017 11:43:22 +0300 (EEST)	[thread overview]
Message-ID: <alpine.LRH.2.21.1710251129520.7098@math.ut.ee> (raw)
In-Reply-To: <alpine.LRH.2.21.1710251109150.7098@math.ut.ee>

(Added linux-pci to CC)

> > I run Gentoo Linux on my alphas, with latest git kernels for test. 
> > 4.13.0 worked well on 3 alphas but 4.13.0-09217-g5969d1bb3082 hangs on 
> > boot on all 3 of them. Tried bisecting on PC164, got into unrelated 
> > stuff, so probably it does not trigger always. Retried bisecting on 
> > DS10L. On the first try I got that the same keel where I first saw bad 
> > was the culprit, another bisect led me to 
> > 0e4c2eeb758a91e68b9eaf7a4bee9bd5ed97ff2b which looks more related.
> > 
> > This is how the crash looks on console:
> > 
> >  * Starting udev ...
> > starting version 225
> >  [ ok ]
> >  * Generating a rule to create a /dev/root symlink ...
> >  [ ok ]
> >  * Populating /dev with existing devices through uevents ...
> >  [ ok ]
> > 
> > halted CPU 0
> > 
> > halt code = 5
> > HALT instruction executed
> > PC = fffffc00009bf914
> > boot failure
> > >>>
> > 
> > What else can I do to debug this?
> 
> Booting with debug ignore_loglevel I get also this:
[...]
> So maybe it is related pcspkr loading, or the just loaded libata or 
> floppy...

removing libata modules and rebooting fixes it - so it seems to be 
loading of libata.

lspci -vvv from broken kernel with no libata loaded:

00:07.0 ISA bridge: ULi Electronics Inc. M1533/M1535/M1543 PCI to ISA Bridge [Aladdin IV/V/V+] (rev c3)
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort+ <MAbort+ >SERR- <PERR- INTx-
        Latency: 0

00:09.0 Ethernet controller: Digital Equipment Corporation DECchip 21142/43 (rev 41)
        Subsystem: Digital Equipment Corporation DE500B Fast Ethernet
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 255 (5000ns min, 10000ns max), Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 29
        Region 0: I/O ports at 8400 [size=128]
        Region 1: Memory at 09091000 (32-bit, non-prefetchable) [size=1K]
        Expansion ROM at 09000000 [disabled] [size=256K]
        Kernel driver in use: tulip

00:0b.0 Ethernet controller: Digital Equipment Corporation DECchip 21142/43 (rev 41)
        Subsystem: Digital Equipment Corporation DE500B Fast Ethernet
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 255 (5000ns min, 10000ns max), Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 30
        Region 0: I/O ports at 8480 [size=128]
        Region 1: Memory at 09092000 (32-bit, non-prefetchable) [size=1K]
        Expansion ROM at 09040000 [disabled] [size=256K]
        Kernel driver in use: tulip

00:0d.0 IDE interface: ULi Electronics Inc. M5229 IDE (rev c1) (prog-if f0)
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 255 (500ns min, 1000ns max)
        Interrupt: pin A routed to IRQ 238
        Region 0: I/O ports at 01f0 [size=8]
        Region 1: I/O ports at 03f4
        Region 2: I/O ports at 0170 [size=8]
        Region 3: I/O ports at 0374
        Region 4: I/O ports at 8800 [size=16]

00:11.0 SCSI storage controller: QLogic Corp. ISP1020 Fast-wide SCSI (rev 05)
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 248, Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 47
        Region 0: I/O ports at 8000 [size=256]
        Region 1: Memory at 09090000 (32-bit, non-prefetchable) [size=4K]
        Expansion ROM at 09080000 [disabled] [size=64K]
        Kernel driver in use: qla1280


/proc/interrupts from the same kernel:
           CPU0       
  1:          3    XT-PIC      i8042
  2:          0    XT-PIC      cascade
  4:        319    XT-PIC      ttyS0
  6:          3    XT-PIC      floppy
  8:     688138     dummy    -RTC       timer
 12:          5    XT-PIC      i8042
 29:        975     DP264      enp0s9
 47:      18229     DP264      qla1280
PMI:          0           Performance Monitoring
ERR:          0

lspci -vvvv from working 4.13.0:

00:07.0 ISA bridge: ULi Electronics Inc. M1533/M1535/M1543 PCI to ISA Bridge [Aladdin IV/V/V+] (rev c3)
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort+ <MAbort+ >SERR- <PERR- INTx-
        Latency: 0

00:09.0 Ethernet controller: Digital Equipment Corporation DECchip 21142/43 (rev 41)
        Subsystem: Digital Equipment Corporation DE500B Fast Ethernet
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 255 (5000ns min, 10000ns max), Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 29
        Region 0: I/O ports at 8400 [size=128]
        Region 1: Memory at 09091000 (32-bit, non-prefetchable) [size=1K]
        Expansion ROM at 09000000 [disabled] [size=256K]
        Kernel driver in use: tulip

00:0b.0 Ethernet controller: Digital Equipment Corporation DECchip 21142/43 (rev 41)
        Subsystem: Digital Equipment Corporation DE500B Fast Ethernet
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 255 (5000ns min, 10000ns max), Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 30
        Region 0: I/O ports at 8480 [size=128]
        Region 1: Memory at 09092000 (32-bit, non-prefetchable) [size=1K]
        Expansion ROM at 09040000 [disabled] [size=256K]
        Kernel driver in use: tulip

00:0d.0 IDE interface: ULi Electronics Inc. M5229 IDE (rev c1) (prog-if f0)
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 255 (500ns min, 1000ns max)
        Interrupt: pin A routed to IRQ 14
        Region 0: I/O ports at 01f0 [size=8]
        Region 1: I/O ports at 03f4
        Region 2: I/O ports at 0170 [size=8]
        Region 3: I/O ports at 0374
        Region 4: I/O ports at 8800 [size=16]
        Kernel driver in use: pata_ali
        Kernel modules: pata_ali, ata_generic

00:11.0 SCSI storage controller: QLogic Corp. ISP1020 Fast-wide SCSI (rev 05)
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 248, Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 47
        Region 0: I/O ports at 8000 [size=256]
        Region 1: Memory at 09090000 (32-bit, non-prefetchable) [size=4K]
        Expansion ROM at 09080000 [disabled] [size=64K]
        Kernel driver in use: qla1280

           CPU0       
  1:          3    XT-PIC      i8042
  2:          0    XT-PIC      cascade
  4:        320    XT-PIC      ttyS0
  6:          3    XT-PIC      floppy
  8:     165722     dummy    -RTC       timer
 12:          5    XT-PIC      i8042
 14:          0    XT-PIC      pata_ali
 15:          0    XT-PIC      pata_ali
 29:        535     DP264      enp0s9
 47:      21742     DP264      qla1280
PMI:          0           Performance Monitoring
ERR:          0


dmesg from broken kernel with no libata loaded:
[    0.000000] Linux version 4.13.0-rc3-00004-g0e4c2eeb758a (mroos@ds10l) (gcc version 5.4.0 (Gentoo 5.4.0-r3 p1.3, pie-0.6.5)) #101 Wed Oct 25 09:49:26 EEST 2017
[    0.000000] Booting GENERIC on Tsunami variation Webbrick using machine vector Webbrick from SRM
[    0.000000] Major Options: LEGACY_START VERBOSE_MCHECK MAGIC_SYSRQ 
[    0.000000] Command line: root=/dev/sda2 console=ttyS0
[    0.000000] memcluster 0, usage 1, start        0, end      256
[    0.000000] memcluster 1, usage 0, start      256, end    65429
[    0.000000] memcluster 2, usage 1, start    65429, end    65536
[    0.000000] freeing pages 256:384
[    0.000000] freeing pages 1358:65429
[    0.000000] reserving pages 1358:1359
[    0.000000] 2048K Bcache detected; load hit latency 18 cycles, load miss latency 112 cycles
[    0.000000] On node 0 totalpages: 65429
[    0.000000] free_area_init_node: node 0, pgdat fffffc0000a4b550, node_mem_map fffffc0000a9e000
[    0.000000]   DMA zone: 448 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 65429 pages, LIFO batch:15
[    0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[    0.000000] pcpu-alloc: [0] 0 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 64981
[    0.000000] Kernel command line: root=/dev/sda2 console=ttyS0
[    0.000000] PID hash table entries: 2048 (order: 1, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 65536 (order: 6, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 32768 (order: 5, 262144 bytes)
[    0.000000] Sorting __ex_table...
[    0.000000] Memory: 508632K/523432K available (5297K kernel code, 422K rwdata, 1504K rodata, 256K init, 212K bss, 14800K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] NR_IRQS: 128
[    0.000000] HWRPB cycle frequency bogus.  Estimated 616560540 Hz
[    0.000000] clocksource: rpcc: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 3099874744 ns
[    0.000976] Console: colour dummy device 80x25
[    0.024414] console [ttyS0] enabled
[    0.026367] Calibrating delay loop... 1221.92 BogoMIPS (lpj=595968)
[    0.036132] pid_max: default: 32768 minimum: 301
[    0.037109] Mount-cache hash table entries: 1024 (order: 0, 8192 bytes)
[    0.038085] Mountpoint-cache hash table entries: 1024 (order: 0, 8192 bytes)
[    0.041015] devtmpfs: initialized
[    0.042968] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1866466235866741 ns
[    0.043945] futex hash table entries: 256 (order: -1, 6144 bytes)
[    0.044921] random: get_random_u32 called from bucket_table_alloc+0x12c/0x300 with crng_init=0
[    0.045898] NET: Registered protocol family 16
[    0.046874] EISA bus registered
[    0.047851] PCI host bridge to bus 0000:00
[    0.048828] pci_bus 0000:00: root bus resource [io  0x0000-0x1ffffff]
[    0.049804] pci_bus 0000:00: root bus resource [mem 0x00000000-0x3fffffff]
[    0.050781] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
[    0.051757] pci 0000:00:07.0: [10b9:1533] type 00 class 0x060100
[    0.052734] pci 0000:00:09.0: [1011:0019] type 00 class 0x020000
[    0.052734] pci 0000:00:09.0: reg 0x10: [io  0x10000-0x1007f]
[    0.052734] pci 0000:00:09.0: reg 0x14: [mem 0x01091000-0x010913ff]
[    0.052734] pci 0000:00:09.0: reg 0x30: [mem 0x01000000-0x0103ffff pref]
[    0.052734] pci 0000:00:0b.0: [1011:0019] type 00 class 0x020000
[    0.052734] pci 0000:00:0b.0: reg 0x10: [io  0x10080-0x100ff]
[    0.052734] pci 0000:00:0b.0: reg 0x14: [mem 0x01091400-0x010917ff]
[    0.052734] pci 0000:00:0b.0: reg 0x30: [mem 0x01040000-0x0107ffff pref]
[    0.052734] pci 0000:00:0d.0: [10b9:5229] type 00 class 0x0101f0
[    0.052734] pci 0000:00:0d.0: [Firmware Bug]: reg 0x10: invalid BAR (can't size)
[    0.053710] pci 0000:00:0d.0: [Firmware Bug]: reg 0x14: invalid BAR (can't size)
[    0.054687] pci 0000:00:0d.0: [Firmware Bug]: reg 0x18: invalid BAR (can't size)
[    0.055664] pci 0000:00:0d.0: [Firmware Bug]: reg 0x1c: invalid BAR (can't size)
[    0.056640] pci 0000:00:0d.0: reg 0x20: [io  0x10110-0x1011f]
[    0.056640] pci 0000:00:0d.0: legacy IDE quirk: reg 0x10: [io  0x01f0-0x01f7]
[    0.057617] pci 0000:00:0d.0: legacy IDE quirk: reg 0x14: [io  0x03f6]
[    0.058593] pci 0000:00:0d.0: legacy IDE quirk: reg 0x18: [io  0x0170-0x0177]
[    0.059570] pci 0000:00:0d.0: legacy IDE quirk: reg 0x1c: [io  0x0376]
[    0.060546] pci 0000:00:11.0: [1077:1020] type 00 class 0x010000
[    0.060546] pci 0000:00:11.0: reg 0x10: [io  0x1000-0x10ff]
[    0.060546] pci 0000:00:11.0: reg 0x14: [mem 0x01090000-0x01090fff]
[    0.060546] pci 0000:00:11.0: reg 0x30: [mem 0x01080000-0x0108ffff pref]
[    0.060546] pci: enabling save/restore of SRM state
[    0.061523] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 00
[    0.061523] pci 0000:00:09.0: BAR 6: assigned [mem 0x09000000-0x0903ffff pref]
[    0.062499] pci 0000:00:0b.0: BAR 6: assigned [mem 0x09040000-0x0907ffff pref]
[    0.063476] pci 0000:00:11.0: BAR 6: assigned [mem 0x09080000-0x0908ffff pref]
[    0.064453] pci 0000:00:11.0: BAR 1: assigned [mem 0x09090000-0x09090fff]
[    0.065429] pci 0000:00:09.0: BAR 1: assigned [mem 0x09091000-0x090913ff]
[    0.066406] pci 0000:00:0b.0: BAR 1: assigned [mem 0x09092000-0x090923ff]
[    0.067382] pci 0000:00:11.0: BAR 0: assigned [io  0x8000-0x80ff]
[    0.068359] pci 0000:00:09.0: BAR 0: assigned [io  0x8400-0x847f]
[    0.069335] pci 0000:00:0b.0: BAR 0: assigned [io  0x8480-0x84ff]
[    0.070312] pci 0000:00:0d.0: BAR 4: assigned [io  0x8800-0x880f]
[    0.071289] pci_bus 0000:00: resource 4 [io  0x0000-0x1ffffff]
[    0.071289] pci_bus 0000:00: resource 5 [mem 0x00000000-0x3fffffff]
[    0.075195] vgaarb: loaded
[    0.076171] SCSI subsystem initialized
[    0.078124] clocksource: Switched to clocksource rpcc
[    0.086914] NET: Registered protocol family 2
[    0.087890] random: get_random_u32 called from neigh_hash_alloc+0xdc/0x160 with crng_init=0
[    0.088867] random: get_random_u32 called from rt_genid_init+0x2c/0x50 with crng_init=0
[    0.089843] TCP established hash table entries: 4096 (order: 2, 32768 bytes)
[    0.090820] TCP bind hash table entries: 4096 (order: 2, 32768 bytes)
[    0.091796] TCP: Hash tables configured (established 4096 bind 4096)
[    0.092773] UDP hash table entries: 256 (order: 0, 8192 bytes)
[    0.094726] UDP-Lite hash table entries: 256 (order: 0, 8192 bytes)
[    0.096679] NET: Registered protocol family 1
[    0.097656] pci 0000:00:07.0: Activating ISA DMA hang workarounds
[    0.098632] PCI: CLS 64 bytes, default 64
[    0.099609] srm_env: version 0.0.6 loaded successfully
[    0.100585] Using epoch 2000 for rtc year 17
[    0.102539] platform rtc-alpha: rtc core: registered rtc-alpha as rtc0
[    0.103515] workingset: timestamp_bits=62 max_order=16 bucket_order=0
[    0.113281] random: fast init done
[    0.115234] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    0.116210] io scheduler noop registered
[    0.118164] io scheduler cfq registered (default)
[    0.119140] isapnp: Scanning for PnP cards...
[    0.473632] isapnp: No Plug & Play device found
[    0.475585] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[    0.477538] serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    0.480468] serial8250: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
[    0.482421] qla1280: QLA1040 found on PCI bus 0, dev 17
[    0.484374] Floppy drive(s): fd0 is 2.88M
[    0.824218] random: crng init done
[    0.946288] FDC 0 is a post-1991 82077
[    0.960937] scsi(0:0): Resetting SCSI BUS
[    3.999997] scsi host0: QLogic QLA1040 PCI to SCSI Host Adapter
                      Firmware version:  7.65.06, Driver version 3.27.1
[    4.006833] Linux Tulip driver version 1.1.15 (Feb 27, 2007)
[    4.013669] tulip0: EEPROM default media type Autosense
[    4.014646] tulip0: Index #0 - Media 10baseT (#0) described by a 21142 Serial PHY (2) block
[    4.015622] tulip0: Index #1 - Media 10baseT-FDX (#4) described by a 21142 Serial PHY (2) block
[    4.016599] tulip0: Index #2 - Media 100baseTx (#3) described by a 21143 SYM PHY (4) block
[    4.017576] tulip0: Index #3 - Media 100baseTx-FDX (#5) described by a 21143 SYM PHY (4) block
[    4.025388] net eth0: Digital DS21142/43 Tulip rev 65 at MMIO 0x9091000, 00:10:64:30:19:8e, IRQ 29
[    4.032224] tulip1: EEPROM default media type Autosense
[    4.033201] tulip1: Index #0 - Media 10baseT (#0) described by a 21142 Serial PHY (2) block
[    4.034177] tulip1: Index #1 - Media 10baseT-FDX (#4) described by a 21142 Serial PHY (2) block
[    4.035154] tulip1: Index #2 - Media 100baseTx (#3) described by a 21143 SYM PHY (4) block
[    4.036130] tulip1: Index #3 - Media 100baseTx-FDX (#5) described by a 21143 SYM PHY (4) block
[    4.043943] net eth1: Digital DS21142/43 Tulip rev 65 at MMIO 0x9092000, 00:10:64:30:19:8d, IRQ 30
[    4.049802] serio: i8042 KBD port at 0x60,0x64 irq 1
[    4.050779] serio: i8042 AUX port at 0x60,0x64 irq 12
[    4.051755] scsi 0:0:0:0: Direct-Access     COMPAQ   BF0369A4BC       HPB7 PQ: 0 ANSI: 3
[    4.053708] mousedev: PS/2 mouse device common for all mice
[    4.055661] NET: Registered protocol family 10
[    4.058591] scsi(0:0:0:0):
[    4.058591]  Sync: period 10, offset 12
[    4.058591] , Wide
[    4.058591] , Tagged queuing: depth 31

[    4.060544] atkbd serio0: keyboard reset failed on isa0060/serio0
[    4.062497] Segment Routing with IPv6
[    4.063474] NET: Registered protocol family 17
[    4.065427] platform rtc-alpha: setting system clock to 2017-10-25 08:33:31 UTC (1508920411)
[    4.083005] atkbd serio1: keyboard reset failed on isa0060/serio1
[    6.167965] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    6.168942] sd 0:0:0:0: [sda] 71132000 512-byte logical blocks: (36.4 GB/33.9 GiB)
[    6.170895] sd 0:0:0:0: [sda] Write Protect is off
[    6.171871] sd 0:0:0:0: [sda] Mode Sense: cf 00 10 08
[    6.172848] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, supports DPO and FUA
[    6.186520]  sda: sda1 sda2 sda4
[    6.191403] sd 0:0:0:0: [sda] Attached SCSI disk
[    6.195309] EXT4-fs (sda2): couldn't mount as ext3 due to feature incompatibilities
[    6.197262] EXT4-fs (sda2): couldn't mount as ext2 due to feature incompatibilities
[    6.211910] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[    6.212887] VFS: Mounted root (ext4 filesystem) readonly on device 8:2.
[    6.234371] devtmpfs: mounted
[    6.235348] Freeing unused kernel memory: 256K
[    6.236324] This architecture does not have kernel memory protection.
[   13.266594] tulip 0000:00:0b.0 enp0s11: renamed from eth1
[   13.267571] tulip 0000:00:09.0 enp0s9: renamed from eth0
[   15.346671] EXT4-fs (sda2): re-mounted. Opts: (null)
[   16.040030] EXT4-fs (sda1): mounting ext2 file system using the ext4 subsystem
[   16.050773] EXT4-fs (sda1): mounted filesystem without journal. Opts: (null)

-- 
Meelis Roos (mroos@ut.ee)      http://www.cs.ut.ee/~mroos/

  reply	other threads:[~2017-10-25  9:14 UTC|newest]

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-10-25  8:05 alpha boot hang - 4.14-rc* regression Meelis Roos
2017-10-25  8:12 ` Meelis Roos
2017-10-25  8:43   ` Meelis Roos [this message]
2017-10-25  9:21     ` Lorenzo Pieralisi
2017-10-25 12:21       ` Meelis Roos
2017-10-25 13:37         ` Lorenzo Pieralisi
2017-10-25 14:49           ` Meelis Roos
2017-10-25 15:14             ` Lorenzo Pieralisi
2017-10-25 15:54               ` Meelis Roos
2017-10-25 18:01               ` Meelis Roos
2017-10-26  8:54                 ` Lorenzo Pieralisi

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=alpine.LRH.2.21.1710251129520.7098@math.ut.ee \
    --to=mroos@ut.ee \
    --cc=linux-alpha@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=lorenzo.pieralisi@arm.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.