From: Mark Brown <broonie@kernel.org>
To: Shuming Fan <shumingf@realtek.com>
Cc: oder_chiou@realtek.com, jack.yu@realtek.com,
alsa-devel@alsa-project.org, lars@metafoo.de,
lgirdwood@gmail.com, Mark Brown <broonie@kernel.org>,
derek.fang@realtek.com, sathya.prakash.m.r@intel.com,
flove@realtek.com
Subject: [alsa-devel] Applied "ASoC: rt1011: set the different setting for QFN/WLCSP package" to the asoc tree
Date: Fri, 17 Jan 2020 15:44:12 +0000 (GMT) [thread overview]
Message-ID: <applied-20200116091854.18095-1-shumingf@realtek.com> (raw)
In-Reply-To: <20200116091854.18095-1-shumingf@realtek.com>
The patch
ASoC: rt1011: set the different setting for QFN/WLCSP package
has been applied to the asoc tree at
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git for-5.6
All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying
to this mail.
Thanks,
Mark
From 0e4ba0290e5851833f17b2b56deab6a28827bb07 Mon Sep 17 00:00:00 2001
From: Shuming Fan <shumingf@realtek.com>
Date: Thu, 16 Jan 2020 17:18:54 +0800
Subject: [PATCH] ASoC: rt1011: set the different setting for QFN/WLCSP package
The QFN package is a new one.
There is a different initial setting to the chip of QFN and WLCSP package.
Signed-off-by: Shuming Fan <shumingf@realtek.com>
Link: https://lore.kernel.org/r/20200116091854.18095-1-shumingf@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
---
sound/soc/codecs/rt1011.c | 17 +++++++++++++++--
sound/soc/codecs/rt1011.h | 1 +
2 files changed, 16 insertions(+), 2 deletions(-)
diff --git a/sound/soc/codecs/rt1011.c b/sound/soc/codecs/rt1011.c
index 2552073e54ce..dec5638060c3 100644
--- a/sound/soc/codecs/rt1011.c
+++ b/sound/soc/codecs/rt1011.c
@@ -40,7 +40,6 @@ static const struct reg_sequence init_list[] = {
{ RT1011_ADC_SET_5, 0x0a20 },
{ RT1011_DAC_SET_2, 0xa032 },
- { RT1011_ADC_SET_1, 0x2925 },
{ RT1011_SPK_PRO_DC_DET_1, 0xb00c },
{ RT1011_SPK_PRO_DC_DET_2, 0xcccc },
@@ -2186,7 +2185,6 @@ static int rt1011_calibrate(struct rt1011_priv *rt1011, unsigned char cali_flag)
/* ADC/DAC setting */
regmap_write(rt1011->regmap, RT1011_ADC_SET_5, 0x0a20);
regmap_write(rt1011->regmap, RT1011_DAC_SET_2, 0xe232);
- regmap_write(rt1011->regmap, RT1011_ADC_SET_1, 0x2925);
regmap_write(rt1011->regmap, RT1011_ADC_SET_4, 0xc000);
/* DC detection */
@@ -2235,8 +2233,18 @@ static int rt1011_calibrate(struct rt1011_priv *rt1011, unsigned char cali_flag)
dc_offset |= (value & 0xffff);
dev_info(dev, "Gain1 offset=0x%x\n", dc_offset);
+ /* check the package info. */
+ regmap_read(rt1011->regmap, RT1011_EFUSE_MATCH_DONE, &value);
+ if (value & 0x4)
+ rt1011->pack_id = 1;
if (cali_flag) {
+
+ if (rt1011->pack_id)
+ regmap_write(rt1011->regmap, RT1011_ADC_SET_1, 0x292c);
+ else
+ regmap_write(rt1011->regmap, RT1011_ADC_SET_1, 0x2925);
+
/* Class D on */
regmap_write(rt1011->regmap, RT1011_CLASS_D_POS, 0x010e);
regmap_write(rt1011->regmap,
@@ -2361,6 +2369,11 @@ static void rt1011_calibration_work(struct work_struct *work)
rt1011_r0_load(rt1011);
}
+
+ if (rt1011->pack_id)
+ snd_soc_component_write(component, RT1011_ADC_SET_1, 0x292c);
+ else
+ snd_soc_component_write(component, RT1011_ADC_SET_1, 0x2925);
}
static int rt1011_parse_dp(struct rt1011_priv *rt1011, struct device *dev)
diff --git a/sound/soc/codecs/rt1011.h b/sound/soc/codecs/rt1011.h
index 68fadc15fa8c..f3a9a96640f1 100644
--- a/sound/soc/codecs/rt1011.h
+++ b/sound/soc/codecs/rt1011.h
@@ -692,6 +692,7 @@ struct rt1011_priv {
unsigned int r0_reg, cali_done;
unsigned int r0_calib, temperature_calib;
int recv_spk_mode;
+ unsigned int pack_id; /* 0: WLCSP; 1: QFN */
};
#endif /* end of _RT1011_H_ */
--
2.20.1
_______________________________________________
Alsa-devel mailing list
Alsa-devel@alsa-project.org
https://mailman.alsa-project.org/mailman/listinfo/alsa-devel
prev parent reply other threads:[~2020-01-17 15:49 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-01-16 9:18 [alsa-devel] [PATCH] ASoC: rt1011: set the different setting for QFN/WLCSP package shumingf
2020-01-17 15:44 ` Mark Brown [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=applied-20200116091854.18095-1-shumingf@realtek.com \
--to=broonie@kernel.org \
--cc=alsa-devel@alsa-project.org \
--cc=derek.fang@realtek.com \
--cc=flove@realtek.com \
--cc=jack.yu@realtek.com \
--cc=lars@metafoo.de \
--cc=lgirdwood@gmail.com \
--cc=oder_chiou@realtek.com \
--cc=sathya.prakash.m.r@intel.com \
--cc=shumingf@realtek.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.