All of lore.kernel.org
 help / color / mirror / Atom feed
From: Stefano Babic <sbabic@denx.de>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH V5 32/32] imx: add i.MX8QXP MEK board support
Date: Fri, 5 Oct 2018 13:29:55 +0200	[thread overview]
Message-ID: <b040f7b8-5242-86ad-32eb-78169736f524@denx.de> (raw)
In-Reply-To: <AM0PR04MB4481A09681D2D2CAFD76BCC788EB0@AM0PR04MB4481.eurprd04.prod.outlook.com>

On 05/10/2018 12:57, Peng Fan wrote:
> Hi Stefano,
> 
>> -----Original Message-----
>> From: Stefano Babic [mailto:sbabic at denx.de]
>> Sent: 2018年10月5日 18:54
>> To: Peng Fan <peng.fan@nxp.com>; sbabic at denx.de; agust at denx.de
>> Cc: u-boot at lists.denx.de; Fabio Estevam <fabio.estevam@nxp.com>
>> Subject: Re: [PATCH V5 32/32] imx: add i.MX8QXP MEK board support
>>
>> Hi Peng,
>>
>> I am fine with most patches of this series. 
> 
> Thanks.
> 
> Anyway, I see that to build the image
>> you are using a "fork" of mkimage...
> 
> Yes. I am developing the i.MX8X mkimage support in U-Boot.
> I think It could catch up next release.

ok - thanks !

Best regards,
Stefano

> 
> Thanks,
> Peng.
> 
>>
>>
>> On 26/09/2018 15:52, Peng Fan wrote:
>>> Add i.MX8QXP MEK board support
>>> Enabled pinctrl/clk/power domain/mmc/i2c driver.
>>> Added README file.
>>>
>>> Signed-off-by: Peng Fan <peng.fan@nxp.com>
>>> Cc: Stefano Babic <sbabic@denx.de>
>>> Cc: Fabio Estevam <fabio.estevam@nxp.com>
>>> Cc: Anatolij Gustschin <agust@denx.de>
>>> ---
>>>  arch/arm/dts/Makefile                     |   2 +
>>>  arch/arm/dts/fsl-imx8qxp-mek.dts          | 136
>> ++++++++++++++++++++++++++
>>>  arch/arm/mach-imx/imx8/Kconfig            |  13 +++
>>>  board/freescale/imx8qxp_mek/Kconfig       |  14 +++
>>>  board/freescale/imx8qxp_mek/MAINTAINERS   |   6 ++
>>>  board/freescale/imx8qxp_mek/Makefile      |   7 ++
>>>  board/freescale/imx8qxp_mek/README        |  72 ++++++++++++++
>>>  board/freescale/imx8qxp_mek/imx8qxp_mek.c | 152
>> +++++++++++++++++++++++++++++
>>>  board/freescale/mx8mq_evk/README          |  81
>> ++++++++++++++++
>>>  configs/imx8qxp_mek_defconfig             |  38 ++++++++
>>>  include/configs/imx8qxp_mek.h             | 156
>> ++++++++++++++++++++++++++++++
>>>  11 files changed, 677 insertions(+)
>>>  create mode 100644 arch/arm/dts/fsl-imx8qxp-mek.dts  create mode
>>> 100644 board/freescale/imx8qxp_mek/Kconfig
>>>  create mode 100644 board/freescale/imx8qxp_mek/MAINTAINERS
>>>  create mode 100644 board/freescale/imx8qxp_mek/Makefile
>>>  create mode 100644 board/freescale/imx8qxp_mek/README
>>>  create mode 100644 board/freescale/imx8qxp_mek/imx8qxp_mek.c
>>>  create mode 100644 board/freescale/mx8mq_evk/README  create mode
>>> 100644 configs/imx8qxp_mek_defconfig  create mode 100644
>>> include/configs/imx8qxp_mek.h
>>>
>>> diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index
>>> 44ebc50bfa..61598bdfeb 100644
>>> --- a/arch/arm/dts/Makefile
>>> +++ b/arch/arm/dts/Makefile
>>> @@ -452,6 +452,8 @@ dtb-$(CONFIG_MX7) += imx7-colibri.dtb \
>>>
>>>  dtb-$(CONFIG_ARCH_MX7ULP) += imx7ulp-evk.dtb
>>>
>>> +dtb-$(CONFIG_ARCH_IMX8) += fsl-imx8qxp-mek.dtb
>>> +
>>>  dtb-$(CONFIG_RCAR_GEN3) += \
>>>  	r8a7795-h3ulcb.dtb \
>>>  	r8a7795-salvator-x.dtb \
>>> diff --git a/arch/arm/dts/fsl-imx8qxp-mek.dts
>>> b/arch/arm/dts/fsl-imx8qxp-mek.dts
>>> new file mode 100644
>>> index 0000000000..6c3bc1dc4d
>>> --- /dev/null
>>> +++ b/arch/arm/dts/fsl-imx8qxp-mek.dts
>>> @@ -0,0 +1,136 @@
>>> +// SPDX-License-Identifier: GPL-2.0+
>>> +/*
>>> + * Copyright 2017-2018 NXP
>>> + */
>>> +
>>> +/dts-v1/;
>>> +
>>> +#include "fsl-imx8qxp.dtsi"
>>> +
>>> +/ {
>>> +	model = "Freescale i.MX8QXP MEK";
>>> +	compatible = "fsl,imx8qxp-mek", "fsl,imx8qxp";
>>> +
>>> +	chosen {
>>> +		bootargs = "console=ttyLP0,115200
>> earlycon=lpuart32,0x5a060000,115200";
>>> +		stdout-path = &lpuart0;
>>> +	};
>>> +
>>> +	regulators {
>>> +		compatible = "simple-bus";
>>> +		#address-cells = <1>;
>>> +		#size-cells = <0>;
>>> +
>>> +		reg_usdhc2_vmmc: usdhc2-vmmc {
>>> +			compatible = "regulator-fixed";
>>> +			regulator-name = "SD1_SPWR";
>>> +			regulator-min-microvolt = <3000000>;
>>> +			regulator-max-microvolt = <3000000>;
>>> +			gpio = <&gpio4 19 GPIO_ACTIVE_HIGH>;
>>> +			off-on-delay = <3480>;
>>> +			enable-active-high;
>>> +		};
>>> +	};
>>> +};
>>> +
>>> +&iomuxc {
>>> +	pinctrl-names = "default";
>>> +	pinctrl-0 = <&pinctrl_hog>;
>>> +
>>> +	imx8qxp-mek {
>>> +		pinctrl_hog: hoggrp {
>>> +			fsl,pins = <
>>> +				SC_P_MCLK_OUT0_ADMA_ACM_MCLK_OUT0
>> 	0x0600004c
>>> +				SC_P_COMP_CTL_GPIO_1V8_3V3_GPIORHB_PAD
>> 	0x000514a0
>>> +			>;
>>> +		};
>>> +
>>> +		pinctrl_ioexp_rst: ioexp-rst-grp {
>>> +			fsl,pins = <
>>> +				SC_P_SPI2_SDO_LSIO_GPIO1_IO01	0x06000021
>>> +			>;
>>> +		};
>>> +
>>> +		pinctrl_lpi2c1: lpi1cgrp {
>>> +			fsl,pins = <
>>> +				SC_P_USB_SS3_TC1_ADMA_I2C1_SCL	0x06000021
>>> +				SC_P_USB_SS3_TC3_ADMA_I2C1_SDA	0x06000021
>>> +			>;
>>> +		};
>>> +
>>> +		pinctrl_lpuart0: lpuart0grp {
>>> +			fsl,pins = <
>>> +				SC_P_UART0_RX_ADMA_UART0_RX	0x06000020
>>> +				SC_P_UART0_TX_ADMA_UART0_TX	0x06000020
>>> +			>;
>>> +		};
>>> +
>>> +		pinctrl_usdhc1: usdhc1grp {
>>> +			fsl,pins = <
>>> +				SC_P_EMMC0_CLK_CONN_EMMC0_CLK
>> 	0x06000041
>>> +				SC_P_EMMC0_CMD_CONN_EMMC0_CMD
>> 	0x00000021
>>> +				SC_P_EMMC0_DATA0_CONN_EMMC0_DATA0
>> 	0x00000021
>>> +				SC_P_EMMC0_DATA1_CONN_EMMC0_DATA1
>> 	0x00000021
>>> +				SC_P_EMMC0_DATA2_CONN_EMMC0_DATA2
>> 	0x00000021
>>> +				SC_P_EMMC0_DATA3_CONN_EMMC0_DATA3
>> 	0x00000021
>>> +				SC_P_EMMC0_DATA4_CONN_EMMC0_DATA4
>> 	0x00000021
>>> +				SC_P_EMMC0_DATA5_CONN_EMMC0_DATA5
>> 	0x00000021
>>> +				SC_P_EMMC0_DATA6_CONN_EMMC0_DATA6
>> 	0x00000021
>>> +				SC_P_EMMC0_DATA7_CONN_EMMC0_DATA7
>> 	0x00000021
>>> +				SC_P_EMMC0_STROBE_CONN_EMMC0_STROBE
>> 	0x00000041
>>> +			>;
>>> +		};
>>> +
>>> +		pinctrl_usdhc2_gpio: usdhc2gpiogrp {
>>> +			fsl,pins = <
>>> +				SC_P_USDHC1_RESET_B_LSIO_GPIO4_IO19	0x00000021
>>> +				SC_P_USDHC1_WP_LSIO_GPIO4_IO21		0x00000021
>>> +				SC_P_USDHC1_CD_B_LSIO_GPIO4_IO22	0x00000021
>>> +			>;
>>> +		};
>>> +
>>> +		pinctrl_usdhc2: usdhc2grp {
>>> +			fsl,pins = <
>>> +				SC_P_USDHC1_CLK_CONN_USDHC1_CLK
>> 	0x06000041
>>> +				SC_P_USDHC1_CMD_CONN_USDHC1_CMD
>> 	0x00000021
>>> +				SC_P_USDHC1_DATA0_CONN_USDHC1_DATA0
>> 	0x00000021
>>> +				SC_P_USDHC1_DATA1_CONN_USDHC1_DATA1
>> 	0x00000021
>>> +				SC_P_USDHC1_DATA2_CONN_USDHC1_DATA2
>> 	0x00000021
>>> +				SC_P_USDHC1_DATA3_CONN_USDHC1_DATA3
>> 	0x00000021
>>> +				SC_P_USDHC1_VSELECT_CONN_USDHC1_VSELECT
>> 	0x00000021
>>> +			>;
>>> +		};
>>> +	};
>>> +};
>>> +
>>> +&lpuart0 {
>>> +	pinctrl-names = "default";
>>> +	pinctrl-0 = <&pinctrl_lpuart0>;
>>> +	status = "okay";
>>> +};
>>> +
>>> +&i2c1 {
>>> +	clock-frequency = <100000>;
>>> +	pinctrl-names = "default";
>>> +	pinctrl-0 = <&pinctrl_lpi2c1 &pinctrl_ioexp_rst>;
>>> +	pinctrl-assert-gpios = <&gpio1 1 GPIO_ACTIVE_HIGH>;
>>> +	status = "okay";
>>> +};
>>> +
>>> +&usdhc1 {
>>> +	pinctrl-names = "default";
>>> +	pinctrl-0 = <&pinctrl_usdhc1>;
>>> +	bus-width = <8>;
>>> +	non-removable;
>>> +	status = "okay";
>>> +};
>>> +
>>> +&usdhc2 {
>>> +	pinctrl-names = "default";
>>> +	pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
>>> +	bus-width = <4>;
>>> +	cd-gpios = <&gpio4 22 GPIO_ACTIVE_LOW>;
>>> +	wp-gpios = <&gpio4 21 GPIO_ACTIVE_HIGH>;
>>> +	vmmc-supply = <&reg_usdhc2_vmmc>;
>>> +	status = "okay";
>>> +};
>>> diff --git a/arch/arm/mach-imx/imx8/Kconfig
>>> b/arch/arm/mach-imx/imx8/Kconfig index 28910c1509..0d3a87cd74 100644
>>> --- a/arch/arm/mach-imx/imx8/Kconfig
>>> +++ b/arch/arm/mach-imx/imx8/Kconfig
>>> @@ -10,4 +10,17 @@ config IMX8QXP
>>>  config SYS_SOC
>>>  	default "imx8"
>>>
>>> +choice
>>> +	prompt "i.MX8 board select"
>>> +	optional
>>> +
>>> +config TARGET_IMX8QXP_MEK
>>> +	bool "Support i.MX8QXP MEK board"
>>> +	select BOARD_LATE_INIT
>>> +	select IMX8QXP
>>> +
>>> +endchoice
>>> +
>>> +source "board/freescale/imx8qxp_mek/Kconfig"
>>> +
>>>  endif
>>> diff --git a/board/freescale/imx8qxp_mek/Kconfig
>>> b/board/freescale/imx8qxp_mek/Kconfig
>>> new file mode 100644
>>> index 0000000000..b67300d816
>>> --- /dev/null
>>> +++ b/board/freescale/imx8qxp_mek/Kconfig
>>> @@ -0,0 +1,14 @@
>>> +if TARGET_IMX8QXP_MEK
>>> +
>>> +config SYS_BOARD
>>> +	default "imx8qxp_mek"
>>> +
>>> +config SYS_VENDOR
>>> +	default "freescale"
>>> +
>>> +config SYS_CONFIG_NAME
>>> +	default "imx8qxp_mek"
>>> +
>>> +source "board/freescale/common/Kconfig"
>>> +
>>> +endif
>>> diff --git a/board/freescale/imx8qxp_mek/MAINTAINERS
>>> b/board/freescale/imx8qxp_mek/MAINTAINERS
>>> new file mode 100644
>>> index 0000000000..e9bf0b35a3
>>> --- /dev/null
>>> +++ b/board/freescale/imx8qxp_mek/MAINTAINERS
>>> @@ -0,0 +1,6 @@
>>> +i.MX8QXP MEK BOARD
>>> +M:	Peng Fan <peng.fan@nxp.com>
>>> +S:	Maintained
>>> +F:	board/freescale/imx8qxp_mek/
>>> +F:	include/configs/imx8qxp_mek.h
>>> +F:	configs/imx8qxp_mek_defconfig
>>> diff --git a/board/freescale/imx8qxp_mek/Makefile
>>> b/board/freescale/imx8qxp_mek/Makefile
>>> new file mode 100644
>>> index 0000000000..f9ee8aeff3
>>> --- /dev/null
>>> +++ b/board/freescale/imx8qxp_mek/Makefile
>>> @@ -0,0 +1,7 @@
>>> +#
>>> +# Copyright 2017 NXP
>>> +#
>>> +# SPDX-License-Identifier:	GPL-2.0+
>>> +#
>>> +
>>> +obj-y += imx8qxp_mek.o
>>> diff --git a/board/freescale/imx8qxp_mek/README
>>> b/board/freescale/imx8qxp_mek/README
>>> new file mode 100644
>>> index 0000000000..7f740894b2
>>> --- /dev/null
>>> +++ b/board/freescale/imx8qxp_mek/README
>>> @@ -0,0 +1,72 @@
>>> +U-Boot for the NXP i.MX8QXP EVK board
>>> +
>>> +Quick Start
>>> +===========
>>> +
>>> +- Build U-Boot
>>> +- Build the ARM Trusted firmware binary
>>> +- Get scfw_tcm.bin and ahab-container.img
>>> +- Get mkimage tool
>>> +- Generate flash.bin using imx-mkimage
>>> +- Flash the binary into the SD card
>>> +- Boot
>>> +
>>> +Build U-Boot
>>> +============
>>> +
>>> +$ make imx8qxp_mek_defconfig
>>> +$ make
>>> +
>>> +Get and Build the ARM Trusted firmware
>>> +======================================
>>> +
>>> +$ git clone
>>> +https://emea01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fso
>>>
>> +urce.codeaurora.org%2Fexternal%2Fimx%2Fimx-atf&amp;data=02%7C01%7C
>> pen
>>>
>> +g.fan%40nxp.com%7C16559bddb09241959d1d08d62ab0de42%7C686ea1d3bc
>> 2b4c6f
>>>
>> +a92cd99c5c301635%7C0%7C0%7C636743336469804902&amp;sdata=IGY1gR
>> Mq6v3qs
>>> +a5SQQTlMeyPSstvbethL9x%2FfOolL4c%3D&amp;reserved=0
>>> +$ cd imx-atf/
>>> +$ git checkout origin/imx_4.9.88_imx8qxp_beta2 -b
>>> +imx_4.9.88_imx8qxp_beta2 $ make PLAT=imx8qxp bl31
>>> +
>>> +Get scfw_tcm.bin and ahab-container.img
>>> +==============================
>>> +
>>> +$ wget
>>> +https://emea01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fww
>>>
>> +w.nxp.com%2Flgfiles%2FNMG%2FMAD%2FYOCTO%2Fimx-sc-firmware-0.7.bin
>> &amp
>>>
>> +;data=02%7C01%7Cpeng.fan%40nxp.com%7C16559bddb09241959d1d08d62a
>> b0de42
>>>
>> +%7C686ea1d3bc2b4c6fa92cd99c5c301635%7C0%7C0%7C6367433364698049
>> 02&amp;
>>>
>> +sdata=KKPP3UvcGXjgGYEyqMfyXfnJ8xCqCMyEzAtW%2FtLfM5I%3D&amp;rese
>> rved=0
>>> +$ chmod +x imx-sc-firmware-0.7.bin
>>> +$ ./imx-sc-firmware-0.7.bin
>>> +$ wget
>>> +https://emea01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fww
>>>
>> +w.nxp.com%2Flgfiles%2FNMG%2FMAD%2FYOCTO%2Ffirmware-imx-7.6.bin&a
>> mp;da
>>>
>> +ta=02%7C01%7Cpeng.fan%40nxp.com%7C16559bddb09241959d1d08d62ab0
>> de42%7C
>>>
>> +686ea1d3bc2b4c6fa92cd99c5c301635%7C0%7C0%7C636743336469804902&
>> amp;sda
>>>
>> +ta=wrb3TqG9ETCnEAFp4PBBal5BNOuS9tCBbgs2pTpKAnM%3D&amp;reserved
>> =0
>>> +$ chmod +x firmware-imx-7.6.bin
>>> +$ ./firmware-imx-7.6.bin
>>> +
>>> +Get imx-mkimage tool
>>> +==============================
>>> +Download the imx-mkimage tool:
>>> +
>>> +$ git clone
>>> +https://emea01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fso
>>>
>> +urce.codeaurora.org%2Fexternal%2Fimx%2Fimx-mkimage%2F&amp;data=02
>> %7C0
>>>
>> +1%7Cpeng.fan%40nxp.com%7C16559bddb09241959d1d08d62ab0de42%7C68
>> 6ea1d3b
>>>
>> +c2b4c6fa92cd99c5c301635%7C0%7C0%7C636743336469804902&amp;sdata=
>> R3IioX
>>> +Srr0lUpsB%2BLgniD2NakzUHfEoGofBWm321Lb8%3D&amp;reserved=0
>>> +$ cd imx-mkimage/
>>> +$ git checkout origin/imx_4.9.88_imx8qxp_beta2 -b
>>> +imx_4.9.88_imx8qxp_beta2
>>
>> I took a look at the source code. We cannot even say that this was started by
>> NXP, because it is clearly based on the original U-Boot mainline code. Having
>> forked it, it is quite bad. We tried in the past to include tools (see i.MX / Atmel /
>> TI ..) into U-Boot code instead of using external tools, and it is a pity to revert
>> this back with i.MX8.
>>
>> This is generally not accepted in mainline - can we revert and integrate this
>> imx-mkimage into U-Boot's mkimage tool ?
>>
>> Best regards,
>> Stefano
>>
>>> +
>>> +
>>> +Generate flash.bin using imx-mkimage
>>> +====================================
>>> +
>>> +Copy the following binaries to imx-mkimage/iMX8M folder:
>>> +
>>> +$ cp imx-atf/build/imx8qxp/release/bl31.bin imx-mkimage/iMX8QX/ $ cp
>>> +u-boot/u-boot.bin imx-mkimage/iMX8QX/
>>> +
>>> +Copy the following firmwares to imx-mkimage/iMX8 folder :
>>> +
>>> +$ cp firmware-imx-7.6/firmware/seco/ahab-container.img
>>> +imx-mkimage/iMX8QX/ $ cp imx-sc-firmware-0.7/mx8qx-mek-scfw-tcm.bin
>>> +imx-mkimage/iMX8QX/scfw_tcm.bin
>>> +
>>> +$ cd imx-mkimage/
>>> +$ make SOC=iMX8QX flash
>>> +
>>> +Flash the binary into the SD card
>>> +=================================
>>> +
>>> +Burn the flash.bin binary to SD card offset 32KB:
>>> +
>>> +$ sudo dd if=iMX8QX/flash.bin of=/dev/sd[x] bs=1024 seek=32
>>> +
>>> +Boot
>>> +====
>>> +Set Boot switch SW2: 1100.
>>> diff --git a/board/freescale/imx8qxp_mek/imx8qxp_mek.c
>>> b/board/freescale/imx8qxp_mek/imx8qxp_mek.c
>>> new file mode 100644
>>> index 0000000000..051c852c5d
>>> --- /dev/null
>>> +++ b/board/freescale/imx8qxp_mek/imx8qxp_mek.c
>>> @@ -0,0 +1,152 @@
>>> +// SPDX-License-Identifier: GPL-2.0+
>>> +/*
>>> + * Copyright 2018 NXP
>>> + */
>>> +
>>> +#include <common.h>
>>> +#include <errno.h>
>>> +#include <linux/libfdt.h>
>>> +#include <environment.h>
>>> +#include <fsl_esdhc.h>
>>> +#include <asm/io.h>
>>> +#include <asm/gpio.h>
>>> +#include <asm/arch/clock.h>
>>> +#include <asm/arch/sci/sci.h>
>>> +#include <asm/arch/imx8-pins.h>
>>> +#include <asm/arch/iomux.h>
>>> +#include <asm/arch/sys_proto.h>
>>> +
>>> +DECLARE_GLOBAL_DATA_PTR;
>>> +
>>> +#define GPIO_PAD_CTRL	((SC_PAD_CONFIG_NORMAL <<
>> PADRING_CONFIG_SHIFT) | \
>>> +			 (SC_PAD_ISO_OFF << PADRING_LPCONFIG_SHIFT) | \
>>> +			 (SC_PAD_28FDSOI_DSE_DV_HIGH << PADRING_DSE_SHIFT) | \
>>> +			 (SC_PAD_28FDSOI_PS_PU << PADRING_PULL_SHIFT))
>>> +
>>> +#define UART_PAD_CTRL	((SC_PAD_CONFIG_OUT_IN <<
>> PADRING_CONFIG_SHIFT) | \
>>> +			 (SC_PAD_ISO_OFF << PADRING_LPCONFIG_SHIFT) | \
>>> +			 (SC_PAD_28FDSOI_DSE_DV_HIGH << PADRING_DSE_SHIFT) | \
>>> +			 (SC_PAD_28FDSOI_PS_PU << PADRING_PULL_SHIFT))
>>> +
>>> +static iomux_cfg_t uart0_pads[] = {
>>> +	SC_P_UART0_RX | MUX_PAD_CTRL(UART_PAD_CTRL),
>>> +	SC_P_UART0_TX | MUX_PAD_CTRL(UART_PAD_CTRL), };
>>> +
>>> +static void setup_iomux_uart(void)
>>> +{
>>> +	imx8_iomux_setup_multiple_pads(uart0_pads, ARRAY_SIZE(uart0_pads));
>>> +}
>>> +
>>> +int board_early_init_f(void)
>>> +{
>>> +	int ret;
>>> +	/* Set UART0 clock root to 80 MHz */
>>> +	sc_pm_clock_rate_t rate = 80000000;
>>> +
>>> +	/* Power up UART0 */
>>> +	ret = sc_pm_set_resource_power_mode(-1, SC_R_UART_0,
>> SC_PM_PW_MODE_ON);
>>> +	if (ret)
>>> +		return ret;
>>> +
>>> +	ret = sc_pm_set_clock_rate(-1, SC_R_UART_0, 2, &rate);
>>> +	if (ret)
>>> +		return ret;
>>> +
>>> +	/* Enable UART0 clock root */
>>> +	ret = sc_pm_clock_enable(-1, SC_R_UART_0, 2, true, false);
>>> +	if (ret)
>>> +		return ret;
>>> +
>>> +	setup_iomux_uart();
>>> +
>>> +	return 0;
>>> +}
>>> +
>>> +#ifdef CONFIG_MXC_GPIO
>>> +#define IOEXP_RESET IMX_GPIO_NR(1, 1)
>>> +
>>> +static iomux_cfg_t board_gpios[] = {
>>> +	SC_P_SPI2_SDO | MUX_MODE_ALT(4) |
>> MUX_PAD_CTRL(GPIO_PAD_CTRL),
>>> +	SC_P_ENET0_REFCLK_125M_25M | MUX_MODE_ALT(4) |
>>> +		MUX_PAD_CTRL(GPIO_PAD_CTRL),
>>> +};
>>> +
>>> +static void board_gpio_init(void)
>>> +{
>>> +	int ret;
>>> +	struct gpio_desc desc;
>>> +
>>> +	ret = dm_gpio_lookup_name("gpio at 1a_3", &desc);
>>> +	if (ret)
>>> +		return;
>>> +
>>> +	ret = dm_gpio_request(&desc, "bb_per_rst_b");
>>> +	if (ret)
>>> +		return;
>>> +
>>> +	dm_gpio_set_dir_flags(&desc, GPIOD_IS_OUT);
>>> +	dm_gpio_set_value(&desc, 0);
>>> +	udelay(50);
>>> +	dm_gpio_set_value(&desc, 1);
>>> +
>>> +	imx8_iomux_setup_multiple_pads(board_gpios,
>>> +ARRAY_SIZE(board_gpios));
>>> +
>>> +	/* enable i2c port expander assert reset line */
>>> +	gpio_request(IOEXP_RESET, "ioexp_rst");
>>> +	gpio_direction_output(IOEXP_RESET, 1); } #endif
>>> +
>>> +int checkboard(void)
>>> +{
>>> +	puts("Board: iMX8QXP MEK\n");
>>> +
>>> +	print_bootinfo();
>>> +
>>> +	return 0;
>>> +}
>>> +
>>> +int board_init(void)
>>> +{
>>> +#ifdef CONFIG_MXC_GPIO
>>> +	board_gpio_init();
>>> +#endif
>>> +
>>> +	return 0;
>>> +}
>>> +
>>> +void detail_board_ddr_info(void)
>>> +{
>>> +	puts("\nDDR    ");
>>> +}
>>> +
>>> +/*
>>> + * Board specific reset that is system reset.
>>> + */
>>> +void reset_cpu(ulong addr)
>>> +{
>>> +	/* TODO */
>>> +}
>>> +
>>> +#ifdef CONFIG_OF_BOARD_SETUP
>>> +int ft_board_setup(void *blob, bd_t *bd) {
>>> +	return 0;
>>> +}
>>> +#endif
>>> +
>>> +int board_mmc_get_env_dev(int devno)
>>> +{
>>> +	return devno;
>>> +}
>>> +
>>> +int board_late_init(void)
>>> +{
>>> +#ifdef CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
>>> +	env_set("board_name", "MEK");
>>> +	env_set("board_rev", "iMX8QXP");
>>> +#endif
>>> +
>>> +	return 0;
>>> +}
>>> diff --git a/board/freescale/mx8mq_evk/README
>>> b/board/freescale/mx8mq_evk/README
>>> new file mode 100644
>>> index 0000000000..cd7e67eec5
>>> --- /dev/null
>>> +++ b/board/freescale/mx8mq_evk/README
>>> @@ -0,0 +1,81 @@
>>> +U-Boot for the NXP i.MX8MQ EVK board
>>> +
>>> +Quick Start
>>> +===========
>>> +
>>> +- Build U-Boot
>>> +- Build the ARM Trusted firmware binary
>>> +- Get DDR firmware and mkimage tool
>>> +- Generate flash.bin using imx-mkimage
>>> +- Flash the binary into the SD card
>>> +- Boot
>>> +
>>> +Build U-Boot
>>> +============
>>> +
>>> +$ make mx8mq_evk_defconfig
>>> +$ make
>>> +
>>> +Get and Build the ARM Trusted firmware
>>> +======================================
>>> +
>>> +$ git clone
>>> +https://emea01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fso
>>>
>> +urce.codeaurora.org%2Fexternal%2Fimx%2Fimx-atf&amp;data=02%7C01%7C
>> pen
>>>
>> +g.fan%40nxp.com%7C16559bddb09241959d1d08d62ab0de42%7C686ea1d3bc
>> 2b4c6f
>>>
>> +a92cd99c5c301635%7C0%7C0%7C636743336469804902&amp;sdata=IGY1gR
>> Mq6v3qs
>>> +a5SQQTlMeyPSstvbethL9x%2FfOolL4c%3D&amp;reserved=0
>>> +$ cd imx-atf/
>>> +$ git checkout origin/imx_4.9.51_imx8m_beta $ make PLAT=imx8mq bl31
>>> +
>>> +Get the DDR firmware and mkimage tool
>> ==============================
>>> +
>>> +$ wget
>>> +https://emea01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fww
>>>
>> +w.nxp.com%2Flgfiles%2FNMG%2FMAD%2FYOCTO%2Ffirmware-imx-7.2.bin&a
>> mp;da
>>>
>> +ta=02%7C01%7Cpeng.fan%40nxp.com%7C16559bddb09241959d1d08d62ab0
>> de42%7C
>>>
>> +686ea1d3bc2b4c6fa92cd99c5c301635%7C0%7C0%7C636743336469804902&
>> amp;sda
>>>
>> +ta=OExVnUkK7Wn70OaZdd0DL1wijv3b%2F5UWyCarxw3fRcA%3D&amp;reser
>> ved=0
>>> +$ chmod +x firmware-imx-7.2.bin
>>> +$ ./firmware-imx-7.2.bin
>>> +
>>> +Download the imx-mkimage tool:
>>> +
>>> +$ git clone
>>> +https://emea01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fso
>>>
>> +urce.codeaurora.org%2Fexternal%2Fimx%2Fimx-mkimage%2F&amp;data=02
>> %7C0
>>>
>> +1%7Cpeng.fan%40nxp.com%7C16559bddb09241959d1d08d62ab0de42%7C68
>> 6ea1d3b
>>>
>> +c2b4c6fa92cd99c5c301635%7C0%7C0%7C636743336469804902&amp;sdata=
>> R3IioX
>>> +Srr0lUpsB%2BLgniD2NakzUHfEoGofBWm321Lb8%3D&amp;reserved=0
>>> +$ cd imx-mkimage/
>>> +$ git checkout origin/imx_4.9.51_imx8m_beta
>>> +
>>> +
>>> +Generate flash.bin using imx-mkimage
>>> +====================================
>>> +
>>> +Copy the following binaries to imx-mkimage/iMX8M folder:
>>> +
>>> +$ cp imx-atf/build/imx8mq/release/bl31.bin imx-mkimage/iMX8M/ $ cp
>>> +u-boot/u-boot-nodtb.bin imx-mkimage/iMX8M/ $ cp
>>> +u-boot/spl/u-boot-spl.bin imx-mkimage/iMX8M/ $ cp
>>> +u-boot/arch/arm/dts/fsl-imx8mq-evk.dtb imx-mkimage/iMX8M/
>>> +
>>> +Copy the following firmwares to imx-mkimage/iMX8 folder :
>>> +
>>> +$ cp
>>> +firmware-imx-7.2/firmware/ddr/synopsys/lpddr4_pmu_train_1d_dmem.bin
>>> +imx-mkimage/iMX8M/ $ cp
>>> +firmware-imx-7.2/firmware/ddr/synopsys/lpddr4_pmu_train_1d_imem.bin
>>> +imx-mkimage/iMX8M/ $ cp
>>> +firmware-imx-7.2/firmware/ddr/synopsys/lpddr4_pmu_train_2d_dmem.bin
>>> +imx-mkimage/iMX8M/ $ cp
>>> +firmware-imx-7.2/firmware/ddr/synopsys/lpddr4_pmu_train_2d_imem.bin
>>> +imx-mkimage/iMX8M/
>>> +
>>> +If you want to run with HDMI, copy signed_hdmi_imx8m.bin to
>> imx-mkimage/iMX8M.
>>> +
>>> +Before generating the flash.bin, transfer the mkimage generated by U-Boot
>> to iMX8M folder:
>>> +
>>> +$ cp u-boot/tools/mkimage imx-mkimage/iMX8M/ $ mv
>>> +imx-mkimage/iMX8M/mkimage imx-mkimage/iMX8M/mkimage_uboot
>>> +
>>> +$ cd imx-mkimage/
>>> +$ make SOC=iMX8M flash_spl_uboot
>>> +
>>> +Or for using HDMI:
>>> +
>>> +$ make SOC=iMX8M flash_hdmi_spl_uboot
>>> +
>>> +Flash the binary into the SD card
>>> +=================================
>>> +
>>> +Burn the flash.bin binary to SD card offset 33KB:
>>> +
>>> +$ sudo dd if=iMX8M/flash.bin of=/dev/sd[x] bs=1024 seek=33
>>> +
>>> +Boot
>>> +====
>>> +Set Boot switch SW801: 1100 and Bmode: 10 to boot from Micro SD.
>>> diff --git a/configs/imx8qxp_mek_defconfig
>>> b/configs/imx8qxp_mek_defconfig new file mode 100644 index
>>> 0000000000..873f30c9c5
>>> --- /dev/null
>>> +++ b/configs/imx8qxp_mek_defconfig
>>> @@ -0,0 +1,38 @@
>>> +CONFIG_ARM=y
>>> +CONFIG_ARCH_IMX8=y
>>> +CONFIG_SYS_TEXT_BASE=0x80020000
>>> +CONFIG_SYS_MALLOC_F_LEN=0x2000
>>> +CONFIG_TARGET_IMX8QXP_MEK=y
>>> +CONFIG_NR_DRAM_BANKS=3
>>> +CONFIG_BOOTDELAY=3
>>> +# CONFIG_CMD_IMPORTENV is not set
>>> +CONFIG_CMD_GPIO=y
>>> +CONFIG_CMD_I2C=y
>>> +CONFIG_CMD_MMC=y
>>> +CONFIG_CMD_DHCP=y
>>> +CONFIG_CMD_MII=y
>>> +CONFIG_CMD_PING=y
>>> +CONFIG_CMD_CACHE=y
>>> +CONFIG_CMD_FAT=y
>>> +CONFIG_DEFAULT_DEVICE_TREE="fsl-imx8qxp-mek"
>>> +CONFIG_ENV_IS_IN_MMC=y
>>> +CONFIG_CLK_IMX8=y
>>> +CONFIG_DM_GPIO=y
>>> +CONFIG_DM_PCA953X=y
>>> +CONFIG_DM_I2C=y
>>> +CONFIG_SYS_I2C_IMX_LPI2C=y
>>> +CONFIG_I2C_MUX=y
>>> +CONFIG_I2C_MUX_PCA954x=y
>>> +CONFIG_MISC=y
>>> +CONFIG_DM_MMC=y
>>> +CONFIG_DM_ETH=y
>>> +CONFIG_PINCTRL=y
>>> +CONFIG_PINCTRL_IMX8=y
>>> +CONFIG_POWER_DOMAIN=y
>>> +CONFIG_IMX8_POWER_DOMAIN=y
>>> +CONFIG_DM_REGULATOR=y
>>> +CONFIG_DM_REGULATOR_FIXED=y
>>> +CONFIG_DM_REGULATOR_GPIO=y
>>> +CONFIG_DM_SERIAL=y
>>> +CONFIG_FSL_LPUART=y
>>> +# CONFIG_EFI_LOADER is not set
>>> diff --git a/include/configs/imx8qxp_mek.h
>>> b/include/configs/imx8qxp_mek.h new file mode 100644 index
>>> 0000000000..82553ce790
>>> --- /dev/null
>>> +++ b/include/configs/imx8qxp_mek.h
>>> @@ -0,0 +1,156 @@
>>> +/* SPDX-License-Identifier: GPL-2.0+ */
>>> +/*
>>> + * Copyright 2018 NXP
>>> + */
>>> +
>>> +#ifndef __IMX8QXP_MEK_H
>>> +#define __IMX8QXP_MEK_H
>>> +
>>> +#include <linux/sizes.h>
>>> +#include <asm/arch/imx-regs.h>
>>> +
>>> +#define CONFIG_REMAKE_ELF
>>> +
>>> +#define CONFIG_BOARD_EARLY_INIT_F
>>> +
>>> +/* Flat Device Tree Definitions */
>>> +#define CONFIG_OF_BOARD_SETUP
>>> +
>>> +#undef CONFIG_CMD_EXPORTENV
>>> +#undef CONFIG_CMD_IMPORTENV
>>> +#undef CONFIG_CMD_IMLS
>>> +
>>> +#undef CONFIG_CMD_CRC32
>>> +#undef CONFIG_BOOTM_NETBSD
>>> +
>>> +#define CONFIG_FSL_ESDHC
>>> +#define CONFIG_FSL_USDHC
>>> +#define CONFIG_SYS_FSL_ESDHC_ADDR       0
>>> +#define USDHC1_BASE_ADDR                0x5B010000
>>> +#define USDHC2_BASE_ADDR                0x5B020000
>>> +#define CONFIG_SUPPORT_EMMC_BOOT	/* eMMC specific */
>>> +
>>> +#define CONFIG_ENV_OVERWRITE
>>> +
>>> +#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
>>> +
>>> +/* GPIO configs */
>>> +#define CONFIG_MXC_GPIO
>>> +
>>> +/* Initial environment variables */
>>> +#define CONFIG_EXTRA_ENV_SETTINGS		\
>>> +	"script=boot.scr\0" \
>>> +	"image=Image\0" \
>>> +	"panel=NULL\0" \
>>> +	"console=ttyLP0,${baudrate}
>> earlycon=lpuart32,0x5a060000,${baudrate}\0" \
>>> +	"fdt_addr=0x83000000\0"			\
>>> +	"fdt_high=0xffffffffffffffff\0"		\
>>> +	"boot_fdt=try\0" \
>>> +	"fdt_file=fsl-imx8qxp-mek.dtb\0" \
>>> +	"initrd_addr=0x83800000\0"		\
>>> +	"initrd_high=0xffffffffffffffff\0" \
>>> +	"mmcdev="__stringify(CONFIG_SYS_MMC_ENV_DEV)"\0" \
>>> +	"mmcpart=" __stringify(CONFIG_SYS_MMC_IMG_LOAD_PART) "\0" \
>>> +	"mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \
>>> +	"mmcautodetect=yes\0" \
>>> +	"mmcargs=setenv bootargs console=${console} root=${mmcroot}\0 " \
>>> +	"loadbootscript=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr}
>> ${script};\0" \
>>> +	"bootscript=echo Running bootscript from mmc ...; " \
>>> +		"source\0" \
>>> +	"loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0"
>> \
>>> +	"loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
>>> +	"mmcboot=echo Booting from mmc ...; " \
>>> +		"run mmcargs; " \
>>> +		"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
>>> +			"if run loadfdt; then " \
>>> +				"booti ${loadaddr} - ${fdt_addr}; " \
>>> +			"else " \
>>> +				"echo WARN: Cannot load the DT; " \
>>> +			"fi; " \
>>> +		"else " \
>>> +			"echo wait for boot; " \
>>> +		"fi;\0" \
>>> +	"netargs=setenv bootargs console=${console} " \
>>> +		"root=/dev/nfs " \
>>> +		"ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
>>> +	"netboot=echo Booting from net ...; " \
>>> +		"run netargs;  " \
>>> +		"if test ${ip_dyn} = yes; then " \
>>> +			"setenv get_cmd dhcp; " \
>>> +		"else " \
>>> +			"setenv get_cmd tftp; " \
>>> +		"fi; " \
>>> +		"${get_cmd} ${loadaddr} ${image}; " \
>>> +		"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
>>> +			"if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
>>> +				"booti ${loadaddr} - ${fdt_addr}; " \
>>> +			"else " \
>>> +				"echo WARN: Cannot load the DT; " \
>>> +			"fi; " \
>>> +		"else " \
>>> +			"booti; " \
>>> +		"fi;\0"
>>> +
>>> +#define CONFIG_BOOTCOMMAND \
>>> +	   "mmc dev ${mmcdev}; if mmc rescan; then " \
>>> +		   "if run loadbootscript; then " \
>>> +			   "run bootscript; " \
>>> +		   "else " \
>>> +			   "if run loadimage; then " \
>>> +				   "run mmcboot; " \
>>> +			   "else run netboot; " \
>>> +			   "fi; " \
>>> +		   "fi; " \
>>> +	   "else booti ${loadaddr} - ${fdt_addr}; fi"
>>> +
>>> +/* Link Definitions */
>>> +#define CONFIG_LOADADDR			0x80280000
>>> +
>>> +#define CONFIG_SYS_LOAD_ADDR           CONFIG_LOADADDR
>>> +
>>> +#define CONFIG_SYS_INIT_SP_ADDR         0x80200000
>>> +
>>> +/* Default environment is in SD */
>>> +#define CONFIG_ENV_SIZE			0x1000
>>> +#define CONFIG_ENV_OFFSET		(64 * SZ_64K)
>>> +#define CONFIG_SYS_MMC_ENV_PART		0	/* user area */
>>> +
>>> +#define CONFIG_SYS_MMC_IMG_LOAD_PART	1
>>> +
>>> +/* On LPDDR4 board, USDHC1 is for eMMC, USDHC2 is for SD on CPU board
>> */
>>> +#define CONFIG_SYS_MMC_ENV_DEV		1   /* USDHC2 */
>>> +#define CONFIG_MMCROOT			"/dev/mmcblk1p2"  /* USDHC2
>> */
>>> +#define CONFIG_SYS_FSL_USDHC_NUM	2
>>> +
>>> +/* Size of malloc() pool */
>>> +#define CONFIG_SYS_MALLOC_LEN		((CONFIG_ENV_SIZE + (32 * 1024))
>> * 1024)
>>> +
>>> +#define CONFIG_SYS_SDRAM_BASE		0x80000000
>>> +#define PHYS_SDRAM_1			0x80000000
>>> +#define PHYS_SDRAM_2			0x880000000
>>> +#define PHYS_SDRAM_1_SIZE		0x80000000	/* 2 GB */
>>> +/* LPDDR4 board total DDR is 3GB */
>>> +#define PHYS_SDRAM_2_SIZE		0x40000000	/* 1 GB */
>>> +
>>> +/* Serial */
>>> +#define CONFIG_BAUDRATE			115200
>>> +
>>> +/* Monitor Command Prompt */
>>> +#define CONFIG_HUSH_PARSER
>>> +#define CONFIG_SYS_PROMPT_HUSH_PS2     "> "
>>> +#define CONFIG_SYS_CBSIZE              2048
>>> +#define CONFIG_SYS_MAXARGS             64
>>> +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
>>> +#define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE + \
>>> +					sizeof(CONFIG_SYS_PROMPT) + 16)
>>> +
>>> +/* Generic Timer Definitions */
>>> +#define COUNTER_FREQUENCY		8000000	/* 8MHz */
>>> +
>>> +#ifndef CONFIG_DM_PCA953X
>>> +#define CONFIG_PCA953X
>>> +#define CONFIG_CMD_PCA953X
>>> +#define CONFIG_CMD_PCA953X_INFO
>>> +#endif
>>> +
>>> +#endif /* __IMX8QXP_MEK_H */
>>>
>>
>>
>> --
>> ================================================================
>> =====
>> DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
>> HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
>> Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
>> ================================================================
>> =====


-- 
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================

  reply	other threads:[~2018-10-05 11:29 UTC|newest]

Thread overview: 39+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-09-26 13:52 [U-Boot] [PATCH V5 00/32] i.MX: Add i.MX8QXP support Peng Fan
2018-09-26 13:52 ` [U-Boot] [PATCH V5 01/32] dt-bindings: pinctrl: add i.MX8QXP pads definition Peng Fan
2018-09-26 13:52 ` [U-Boot] [PATCH V5 02/32] dt-bindings: clock: dt-bindings: pinctrl: add i.MX8QXP clocks definition Peng Fan
2018-09-26 13:52 ` [U-Boot] [PATCH V5 03/32] dt-bindings: soc: add i.MX8QXP pm and rsrc definition Peng Fan
2018-09-26 13:52 ` [U-Boot] [PATCH V5 04/32] imx8: add scfw macro definition Peng Fan
2018-09-26 13:52 ` [U-Boot] [PATCH V5 05/32] imx: add Kconfig entry for i.MX8QXP Peng Fan
2018-09-26 13:52 ` [U-Boot] [PATCH V5 06/32] arm: build mach-imx for i.MX8 Peng Fan
2018-09-26 13:52 ` [U-Boot] [PATCH V5 07/32] arm: global_data: add scu_dev " Peng Fan
2018-10-14  8:26   ` Anatolij Gustschin
2018-09-26 13:52 ` [U-Boot] [PATCH V5 08/32] misc: add i.MX8 misc driver Peng Fan
2018-10-14  8:44   ` Anatolij Gustschin
2018-09-26 13:52 ` [U-Boot] [PATCH V5 09/32] misc: imx8: add scfw api impementation Peng Fan
2018-09-26 13:52 ` [U-Boot] [PATCH V5 10/32] imx: boot_mode: Add FLEXSPI boot entry Peng Fan
2018-09-26 13:52 ` [U-Boot] [PATCH V5 11/32] imx8: add imx-regs header file Peng Fan
2018-09-26 13:52 ` [U-Boot] [PATCH V5 12/32] imx8: pins: include i.MX8QXP pin header when CONFIG_IMX8QXP defined Peng Fan
2018-09-26 13:52 ` [U-Boot] [PATCH V5 13/32] imx: add i.MX8 cpu type Peng Fan
2018-09-26 13:52 ` [U-Boot] [PATCH V5 14/32] armv8: add cpu core helper functions Peng Fan
2018-09-26 13:52 ` [U-Boot] [PATCH V5 15/32] imx8: add basic cpu support Peng Fan
2018-09-26 13:52 ` [U-Boot] [PATCH V5 16/32] imx8: add boot device detection Peng Fan
2018-09-26 13:52 ` [U-Boot] [PATCH V5 17/32] imx8: implement mmc_get_env_dev Peng Fan
2018-09-26 13:52 ` [U-Boot] [PATCH V5 18/32] imx8: add mmu and dram related functiions Peng Fan
2018-09-26 13:52 ` [U-Boot] [PATCH V5 19/32] imx8: add arch_cpu_init arch_cpu_init_dm Peng Fan
2018-09-26 13:52 ` [U-Boot] [PATCH V5 20/32] imx8: add iomux configuration api Peng Fan
2018-09-26 13:52 ` [U-Boot] [PATCH V5 21/32] imx8: add dummy clock Peng Fan
2018-09-26 13:52 ` [U-Boot] [PATCH V5 22/32] gpio: mxc_gpio: add support for i.MX8 Peng Fan
2018-09-26 13:52 ` [U-Boot] [PATCH V5 23/32] pinctrl: Add pinctrl driver " Peng Fan
2018-09-26 13:52 ` [U-Boot] [PATCH V5 24/32] power: Add power domain " Peng Fan
2018-09-26 13:52 ` [U-Boot] [PATCH V5 25/32] clk: imx: add clk driver for i.MX8QXP Peng Fan
2018-09-26 13:52 ` [U-Boot] [PATCH V5 26/32] serial_lpuart: Update lpuart driver to support i.MX8 Peng Fan
2018-09-26 13:52 ` [U-Boot] [PATCH V5 27/32] serial: lpuart: Enable RX and TX FIFO Peng Fan
2018-09-26 13:52 ` [U-Boot] [PATCH V5 28/32] serial: lpuart: support uclass clk api Peng Fan
2018-09-26 13:52 ` [U-Boot] [PATCH V5 29/32] fsl_esdhc: Update usdhc driver to support i.MX8 Peng Fan
2018-09-26 13:52 ` [U-Boot] [PATCH V5 30/32] mmc: fsl_esdhc: add uclass clk support Peng Fan
2018-09-26 13:52 ` [U-Boot] [PATCH V5 31/32] arm: dts: introduce dtsi for i.MX8QXP Peng Fan
2018-09-26 13:52 ` [U-Boot] [PATCH V5 32/32] imx: add i.MX8QXP MEK board support Peng Fan
2018-10-05 10:53   ` Stefano Babic
2018-10-05 10:57     ` Peng Fan
2018-10-05 11:29       ` Stefano Babic [this message]
2018-10-04  0:56 ` [U-Boot] [PATCH V5 00/32] i.MX: Add i.MX8QXP support Peng Fan

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=b040f7b8-5242-86ad-32eb-78169736f524@denx.de \
    --to=sbabic@denx.de \
    --cc=u-boot@lists.denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.