All of lore.kernel.org
 help / color / mirror / Atom feed
From: Heinrich Schuchardt <xypron.glpk@gmx.de>
To: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Ard Biesheuvel <ardb@kernel.org>,
	linux-efi <linux-efi@vger.kernel.org>,
	linux-arm-kernel <linux-arm-kernel@lists.infradead.org>,
	Laszlo Ersek <lersek@redhat.com>,
	Leif Lindholm <leif@nuviainc.com>,
	Peter Jones <pjones@redhat.com>,
	Matthew Garrett <mjg59@google.com>,
	Alexander Graf <agraf@csgraf.de>,
	Ilias Apalodimas <ilias.apalodimas@linaro.org>,
	Daniel Kiper <daniel.kiper@oracle.com>
Subject: Re: [PATCH 1/2] efi/libstub: add support for loading the initrd from a device path
Date: Fri, 7 Feb 2020 01:01:19 +0100	[thread overview]
Message-ID: <b2535bc9-f9be-e250-4da1-bce0b67abb6f@gmx.de> (raw)
In-Reply-To: <CAKv+Gu9Z24GeqrqKhPJN+aAu8crSKvT0ZBeFL=0ik=z2Sd1FmQ@mail.gmail.com>

On 2/6/20 11:35 PM, Ard Biesheuvel wrote:
> On Thu, 6 Feb 2020 at 18:26, Heinrich Schuchardt <xypron.glpk@gmx.de> wrote:
>>
>> On 2/6/20 3:03 PM, Ard Biesheuvel wrote:
>>> There are currently two ways to specify the initrd to be passed to the
>>> Linux kernel when booting via the EFI stub:
>>> - it can be passed as a initrd= command line option when doing a pure PE
>>>     boot (as opposed to the EFI handover protocol that exists for x86)
>>> - otherwise, the bootloader or firmware can load the initrd into memory,
>>>     and pass the address and size via the bootparams struct (x86) or
>>>     device tree (ARM)
>>>
>>> In the first case, we are limited to loading from the same file system
>>> that the kernel was loaded from, and it is also problematic in a trusted
>>
>> Hello Ard,
>>
>> "same file system" is not a limitation of using a command line
>> parameter. Any device path can be passed as a string.
>>
>
> What do you mean? The current implementation opens the volume via the
> loaded_image_info struct, and finds the file based on its filename,
> not on a device path. So how can it access files on other file
> systems?
>

I talked aobut the information can be transmitted in a parameter not
about the restrictions the current Linux command line implementation has.

If you would pass a complete device path as parameter, you could use the
UEFI API to find the device with block file system and use the
EFI_SIMPLE_FILE_SYSTEM_PROTOCOL to load the file.

>
>>> boot context, given that we cannot easily protect the command line from
>>> tampering without either adding complicated white/blacklisting of boot
>>> arguments or locking down the command line altogether.
>>
>> Not relying on the command line for finding the initrd image does not
>> secure the integrity and the validity of the initrd image.
>>
>
> It does. It ensures that [signed] bootloader code is in charge of
> providing the initrd at the point during the boot where the kernel is
> ready to consume this data.
>
>> A signature on the initrd image could solve the security problem you
>> describe. It would not require non-Linux software to be changed, and
>> would provide much better security.
>>
>
> A signed initrd would be useful, too, but it doesn't fix the whole problem.
>
> Linux does not support signed initrds today, and this feature permits
> a firmware implementation to do something very similar, i.e., it
> permits the bootloader to perform the verification as it is passed to
> the kernel.

One source of changed initrds is update-initramfs called in an operating
system update process.

How shall a bootloader verify the new initrd if we do not define what a
signed initrd looks like?

Would a bootloader be in a better position to verify an intird then
Linux which already has code for file verification used when loading
modules?

>
>
>>>
>>> In the second case, we force the bootloader to duplicate knowledge about
>>> the boot protocol which is already encoded in the stub, and which may be
>>> subject to change over time, e.g., bootparams struct definitions, memory
>>> allocation/alignment requirements for the placement of the initrd etc etc.
>>> In the ARM case, it also requires the bootloader to modify the hardware
>>> description provided by the firmware, as it is passed in the same file.
>>> On systems where the initrd is measured after loading, it creates a time
>>> window where the initrd contents might be manipulated in memory before
>>> handing over to the kernel.
>>>
>>> Address these concerns by adding support for loading the initrd into
>>> memory by invoking the EFI LoadFile2 protocol installed on a vendor
>>> GUIDed device path that specifically designates a Linux initrd.
>>> This addresses the above concerns, by putting the EFI stub in charge of
>>> placement in memory and of passing the base and size to the kernel proper
>>> (via whatever means it desires) while still leaving it up to the firmware
>>> or bootloader to obtain the file contents, potentially from other file
>>> systems than the one the kernel itself was loaded from. On platforms that
>>> implement measured boot, it permits the firmware to take the measurement
>>> right before the kernel actually consumes the contents.
>>
>> A firmware implementing the UEFI standard will not be aware of any
>> initrd image as such an object does not exist in the standard. It was a
>> wise decision that the UEFI standard is operating system agnostic
>> (accomodating BSD, Linux, Windows, etc.). So the firmware (EDK2, U-Boot,
>> etc.) seems to be out of scope for providing a Linux specific
>> EFI_LOAD_FILE2_PROTOCOL.
>>
>
> You know we are currently patching bootparams struct and DTs to
> provide the initrd information, right? And we have code that knows
> about low/high memory limits, alignment, etc, that is different per
> architecture.
>
>> When booting via GRUB it will be GRUB knowing which initrd to load.
>>
>
> Exactly, which is why GRUB will implement this protocol. That way, it
> does not have to touch the DT at all, or create a bootparams struct
> from setup data and inspect the various flags about placement,
> alignment, preferred addresses, etc.
>
>> Please, indicate which software you expect to expose the initrd related
>> EFI_LOAD_FILE2_PROTOCOL.
>>
>
> The primary use case is GRUB and other intermediate loaders, since it
> would remove any need for these components to know any such details.
> My aim is to make the next architecture that gets added to GRUB for
> EFI boot 100% generic.
>
>> Using an UEFI variable for passing the initrd device path would be a
>> leaner solution on the bootloader side than requiring an extra
>> EFI_LOAD_FILE2_PROTOCOL implementation.
>>
>
> This would also require kernel changes, since we don't currently load
> initrds from arbitrary device paths. The EFI_FILE_PROTOCOL is much
> more complicated than needed, and it doesn't work well with mixed
> mode. It also requires GRUB to expose the filesystem it loads the
> initrd from via EFI protocols, which is currently unnecessary and
> therefore not implemented.

This means you move the complexity of EFI_FILE_PROTOCOL from Linux to GRUB.

I would not have a problem if this would only touch GRUB. But if listen
to Ilias we are replacing one implementation in Linux by one in GRUB and
one in U-Boot and one in EDK2 and one in any other firmware.

>
> Also, using an EFI variable defeats the purpose. The whole point of
> this is making it more likely that the kernel loaded the initrd that
> the bootloader or firmware intended it to load, and having a piece of
> simple [signed] code that implements this is the easiest way to
> achieve that.

At least on my Debian system it is the operating system creating initrd
and defining which initrd matches which kernel. GRUB simply assumes that
files ending on the same version number match. Therefore I would say
Linux hopes that GRUB loads what Linux intended.

The chain of trust would not be broken if the kernel were responsible
for loading the initrd and for checking if it matches the kernel. Linux
already does this for the kernel modules in initrd.

>
> For u-boot, it should be trivial to implement a simple LoadFile2
> protocol wrapper around EFI_FILE_PROTOCOL that can be installed on a
> handle that also carries EFI_FILE_PROTOCOL.
>

A U-Boot implementation of the EFI_LOAD_FILE2_PROTOCOL would need a
device path variable to find the block device and to open the
EFI_SIMPLE_FILE_SYSTEM_PROTOCOL before accessing the file.

Linux would not be needing more lines and we would not repeat the same
code in GRUB, U-Boot, EDK2, etc.

As said Linux updates the initrd often. If that file is not signed by
Linux in a well defined way, do not expect any security at all.

If Linux does not tell which kernel matches which initrd, how should
U-Boot know? - How do you plan to transfer this piece of information?

>>>
>>> Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
>>> ---
>>>    drivers/firmware/efi/libstub/arm-stub.c        | 16 +++--
>>>    drivers/firmware/efi/libstub/efi-stub-helper.c | 65 ++++++++++++++++++++
>>>    drivers/firmware/efi/libstub/efistub.h         | 12 ++++
>>>    drivers/firmware/efi/libstub/x86-stub.c        | 36 ++++++++++-
>>>    include/linux/efi.h                            |  1 +
>>>    5 files changed, 123 insertions(+), 7 deletions(-)
>>>
>>> diff --git a/drivers/firmware/efi/libstub/arm-stub.c b/drivers/firmware/efi/libstub/arm-stub.c
>>> index c7b091f50e55..1db943c1ba2b 100644
>>> --- a/drivers/firmware/efi/libstub/arm-stub.c
>>> +++ b/drivers/firmware/efi/libstub/arm-stub.c
>>> @@ -157,6 +157,7 @@ unsigned long efi_entry(void *handle, efi_system_table_t *sys_table_arg,
>>>        enum efi_secureboot_mode secure_boot;
>>>        struct screen_info *si;
>>>        efi_properties_table_t *prop_tbl;
>>> +     unsigned long max_addr;
>>>
>>>        sys_table = sys_table_arg;
>>>
>>> @@ -255,11 +256,18 @@ unsigned long efi_entry(void *handle, efi_system_table_t *sys_table_arg,
>>>        if (!fdt_addr)
>>>                pr_efi("Generating empty DTB\n");
>>>
>>> -     status = efi_load_initrd(image, ULONG_MAX,
>>> -                              efi_get_max_initrd_addr(dram_base, *image_addr),
>>> -                              &initrd_addr, &initrd_size);
>>> +     max_addr = efi_get_max_initrd_addr(dram_base, *image_addr);
>>> +     status = efi_load_initrd_devpath(&initrd_addr, &initrd_size, max_addr);
>>> +     if (status == EFI_SUCCESS)
>>> +             pr_efi("Loaded initrd from LINUX_EFI_INITRD_MEDIA_GUID device path\n");
>>> +     else if (status == EFI_NOT_FOUND) {
>>> +             status = efi_load_initrd(image, ULONG_MAX, max_addr,
>>> +                                      &initrd_addr, &initrd_size);
>>> +             if (status == EFI_SUCCESS)
>>> +                     pr_efi("Loaded initrd from command line option\n");
>>> +     }

As already mentioned in another mail: If the initrd intended to be
loaded by the the EFI_LOAD_FILE2_PROTOCOL, you fall back to the old
behavior. So the security is not increased by this patch.

>>>        if (status != EFI_SUCCESS)
>>> -             pr_efi_err("Failed initrd from command line!\n");
>>> +             pr_efi_err("Failed to load initrd!\n");
>>>
>>>        efi_random_get_seed();
>>>
>>> diff --git a/drivers/firmware/efi/libstub/efi-stub-helper.c b/drivers/firmware/efi/libstub/efi-stub-helper.c
>>> index 8e60a39df3c5..eaf45ea749b3 100644
>>> --- a/drivers/firmware/efi/libstub/efi-stub-helper.c
>>> +++ b/drivers/firmware/efi/libstub/efi-stub-helper.c
>>> @@ -323,3 +323,68 @@ void efi_char16_printk(efi_char16_t *str)
>>>        efi_call_proto(efi_table_attr(efi_system_table(), con_out),
>>>                       output_string, str);
>>>    }
>>> +
>>> +static const struct {
>>> +     struct efi_vendor_dev_path      vendor;
>>> +     struct efi_generic_dev_path     end;
>>> +} __packed initrd_devpath = {
>>> +     {
>>> +             EFI_DEV_MEDIA,
>>> +             EFI_DEV_MEDIA_VENDOR,
>>> +             sizeof(struct efi_vendor_dev_path),
>>> +             LINUX_EFI_INITRD_MEDIA_GUID
>>> +     }, {
>>> +             EFI_DEV_END_PATH,
>>> +             EFI_DEV_END_ENTIRE,
>>> +             sizeof(struct efi_generic_dev_path)
>>> +     }
>>> +};
>>> +
>>> +efi_status_t efi_load_initrd_devpath(unsigned long *load_addr,
>>> +                                  unsigned long *load_size,
>>> +                                  unsigned long max)
>>> +{
>>> +     efi_guid_t lf2_proto_guid = EFI_LOAD_FILE2_PROTOCOL_GUID;
>>> +     efi_device_path_protocol_t *dp;
>>> +     efi_load_file2_protocol_t *lf2;
>>> +     unsigned long initrd_addr;
>>> +     unsigned long initrd_size;
>>> +     efi_handle_t handle;
>>> +     efi_status_t status;
>>> +
>>> +     if (!load_addr || !load_size)
>>> +             return EFI_INVALID_PARAMETER;
>>> +
>>> +     dp = (efi_device_path_protocol_t *)&initrd_devpath;
>>> +     status = efi_bs_call(locate_device_path, &lf2_proto_guid, &dp, &handle);
>>> +     if (status != EFI_SUCCESS)
>>> +             return status;
>>> +
>>> +     status = efi_bs_call(handle_protocol, handle, &lf2_proto_guid,
>>> +                          (void **)&lf2);
>>> +     if (status != EFI_SUCCESS)
>>> +             return status;
>>
>> You require here that there is a handle exposing the device path
>> protocol with the initrd specific device path. On the same handle the
>> EFI_LOAD_FILE2_PROTOCOL must be installed which will load the initrd
>> file when called with the same device path.
>>
>
> Exactly.
>
>> An alternative implementation would simple loop over all instances of
>> the EFI_LOAD_FILE2_PROTOCOL and try to load the initrd.
>>
>
> How do I distinguish the initrd from other EFI_LOAD_FILE2_PROTOCOL
> instances? For instance, PCI option ROMs are also exposed as
> EFI_LOAD_FILE2_PROTOCOL.

These would respond with EFI_NOT_FOUND. The advantage of looping over
all instances could be that the same handle could be used to provide
multiple files. But how this is implemented is the least of my worries.

Best regards

Heinrich

>
>> It would be worthwhile to describe the requirements on the
>> implementation of the EFI_LOAD_FILE2_PROTOCOL in a code comment and in
>> the documentation.
>>
>> Unfortunately the documentation of UEFI has been duplicated into two files:
>>
>> Documentation/arm/uefi.rst
>> Documentation/x86/x86_64/uefi.rst
>>
>
> Yes, that is a good point. I will work on factoring out the generic
> parts and share them.
>
>
> Thanks for the review,
> Ard.
>
>
>
>>
>>> +
>>> +     initrd_size = 0;
>>> +     status = efi_call_proto(lf2, load_file,
>>> +                             (efi_device_path_protocol_t *)&initrd_devpath,
>>> +                             false, &initrd_size, NULL);
>>> +     if (status != EFI_BUFFER_TOO_SMALL)
>>> +             return EFI_LOAD_ERROR;
>>> +
>>> +     status = efi_allocate_pages(initrd_size, &initrd_addr, max);
>>> +     if (status != EFI_SUCCESS)
>>> +             return status;
>>> +
>>> +     status = efi_call_proto(lf2, load_file,
>>> +                             (efi_device_path_protocol_t *)&initrd_devpath,
>>> +                             false, &initrd_size, (void *)initrd_addr);
>>> +     if (status != EFI_SUCCESS) {
>>> +             efi_free(initrd_size, initrd_addr);
>>> +             return status;
>>> +     }
>>> +
>>> +     *load_addr = initrd_addr;
>>> +     *load_size = initrd_size;
>>> +     return EFI_SUCCESS;
>>> +}
>>> diff --git a/drivers/firmware/efi/libstub/efistub.h b/drivers/firmware/efi/libstub/efistub.h
>>> index 99e93fd76ec5..fbf9f9442eed 100644
>>> --- a/drivers/firmware/efi/libstub/efistub.h
>>> +++ b/drivers/firmware/efi/libstub/efistub.h
>>> @@ -566,6 +566,14 @@ union efi_load_file_protocol {
>>>        } mixed_mode;
>>>    };
>>>
>>> +struct efi_vendor_dev_path {
>>> +     u8              type;
>>> +     u8              sub_type;
>>> +     u16             length;
>>> +     efi_guid_t      vendorguid;
>>> +     u8              vendordata[];
>>> +} __packed;
>>> +
>>>    void efi_pci_disable_bridge_busmaster(void);
>>>
>>>    typedef efi_status_t (*efi_exit_boot_map_processing)(
>>> @@ -651,4 +659,8 @@ efi_status_t efi_load_initrd(efi_loaded_image_t *image,
>>>                             unsigned long *load_addr,
>>>                             unsigned long *load_size);
>>>
>>> +efi_status_t efi_load_initrd_devpath(unsigned long *load_addr,
>>> +                                  unsigned long *load_size,
>>> +                                  unsigned long max);
>>> +
>>>    #endif
>>> diff --git a/drivers/firmware/efi/libstub/x86-stub.c b/drivers/firmware/efi/libstub/x86-stub.c
>>> index f3e2ff31b624..7f38f95676dd 100644
>>> --- a/drivers/firmware/efi/libstub/x86-stub.c
>>> +++ b/drivers/firmware/efi/libstub/x86-stub.c
>>> @@ -419,9 +419,20 @@ efi_status_t __efiapi efi_pe_entry(efi_handle_t handle,
>>>        if (status != EFI_SUCCESS)
>>>                goto fail2;
>>>
>>> -     status = efi_load_initrd(image, hdr->initrd_addr_max,
>>> -                              above4g ? ULONG_MAX : hdr->initrd_addr_max,
>>> -                              &ramdisk_addr, &ramdisk_size);
>>> +     /*
>>> +      * The initrd loaded from the Linux initrd vendor device
>>> +      * path should take precedence, as we don't want the
>>> +      * [unverified] command line to override the initrd
>>> +      * supplied by the [potentially verified] firmware.
>>> +      */
>>> +     status = efi_load_initrd_devpath(&ramdisk_addr, &ramdisk_size,
>>> +                                      above4g ? ULONG_MAX
>>> +                                              : hdr->initrd_addr_max);
>>> +     if (status == EFI_NOT_FOUND)
>>> +             status = efi_load_initrd(image, hdr->initrd_addr_max,
>>> +                                      above4g ? ULONG_MAX
>>> +                                              : hdr->initrd_addr_max,
>>> +                                      &ramdisk_addr, &ramdisk_size);
>>>        if (status != EFI_SUCCESS)
>>>                goto fail2;
>>>        hdr->ramdisk_image = ramdisk_addr & 0xffffffff;
>>> @@ -732,6 +743,25 @@ struct boot_params *efi_main(efi_handle_t handle,
>>>                         ((u64)boot_params->ext_cmd_line_ptr << 32));
>>>        efi_parse_options((char *)cmdline_paddr);
>>>
>>> +     if (!hdr->ramdisk_size && !boot_params->ext_ramdisk_size) {
>>> +             unsigned long max = hdr->initrd_addr_max;
>>> +             unsigned long addr, size;
>>> +
>>> +             if (hdr->xloadflags & XLF_CAN_BE_LOADED_ABOVE_4G)
>>> +                     max = ULONG_MAX;
>>> +
>>> +             status = efi_load_initrd_devpath(&addr, &size, max);
>>> +             if (status == EFI_SUCCESS) {
>>> +                     hdr->ramdisk_image              = (u32)addr;
>>> +                     hdr->ramdisk_size               = (u32)size;
>>> +                     boot_params->ext_ramdisk_image  = (u64)addr >> 32;
>>> +                     boot_params->ext_ramdisk_size   = (u64)size >> 32;
>>> +             } else if (status != EFI_NOT_FOUND) {
>>> +                     efi_printk("efi_load_initrd_devpath() failed!\n");
>>> +                     goto fail;
>>> +             }
>>> +     }
>>> +
>>>        /*
>>>         * If the boot loader gave us a value for secure_boot then we use that,
>>>         * otherwise we ask the BIOS.
>>> diff --git a/include/linux/efi.h b/include/linux/efi.h
>>> index 9ccf313fe9de..75c83c322c40 100644
>>> --- a/include/linux/efi.h
>>> +++ b/include/linux/efi.h
>>> @@ -353,6 +353,7 @@ void efi_native_runtime_setup(void);
>>>    #define LINUX_EFI_TPM_EVENT_LOG_GUID                EFI_GUID(0xb7799cb0, 0xeca2, 0x4943,  0x96, 0x67, 0x1f, 0xae, 0x07, 0xb7, 0x47, 0xfa)
>>>    #define LINUX_EFI_TPM_FINAL_LOG_GUID                EFI_GUID(0x1e2ed096, 0x30e2, 0x4254,  0xbd, 0x89, 0x86, 0x3b, 0xbe, 0xf8, 0x23, 0x25)
>>>    #define LINUX_EFI_MEMRESERVE_TABLE_GUID             EFI_GUID(0x888eb0c6, 0x8ede, 0x4ff5,  0xa8, 0xf0, 0x9a, 0xee, 0x5c, 0xb9, 0x77, 0xc2)
>>> +#define LINUX_EFI_INITRD_MEDIA_GUID          EFI_GUID(0x5568e427, 0x68fc, 0x4f3d,  0xac, 0x74, 0xca, 0x55, 0x52, 0x31, 0xcc, 0x68)
>>>
>>>    /* OEM GUIDs */
>>>    #define DELLEMC_EFI_RCI2_TABLE_GUID         EFI_GUID(0x2d9f28a2, 0xa886, 0x456a,  0x97, 0xa8, 0xf1, 0x1e, 0xf2, 0x4f, 0xf4, 0x55)
>>>
>>


WARNING: multiple messages have this Message-ID
From: Heinrich Schuchardt <xypron.glpk@gmx.de>
To: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: linux-efi <linux-efi@vger.kernel.org>,
	Alexander Graf <agraf@csgraf.de>,
	Daniel Kiper <daniel.kiper@oracle.com>,
	Ilias Apalodimas <ilias.apalodimas@linaro.org>,
	Matthew Garrett <mjg59@google.com>,
	Peter Jones <pjones@redhat.com>,
	Leif Lindholm <leif@nuviainc.com>,
	Laszlo Ersek <lersek@redhat.com>,
	Ard Biesheuvel <ardb@kernel.org>,
	linux-arm-kernel <linux-arm-kernel@lists.infradead.org>
Subject: Re: [PATCH 1/2] efi/libstub: add support for loading the initrd from a device path
Date: Fri, 7 Feb 2020 01:01:19 +0100	[thread overview]
Message-ID: <b2535bc9-f9be-e250-4da1-bce0b67abb6f@gmx.de> (raw)
In-Reply-To: <CAKv+Gu9Z24GeqrqKhPJN+aAu8crSKvT0ZBeFL=0ik=z2Sd1FmQ@mail.gmail.com>

On 2/6/20 11:35 PM, Ard Biesheuvel wrote:
> On Thu, 6 Feb 2020 at 18:26, Heinrich Schuchardt <xypron.glpk@gmx.de> wrote:
>>
>> On 2/6/20 3:03 PM, Ard Biesheuvel wrote:
>>> There are currently two ways to specify the initrd to be passed to the
>>> Linux kernel when booting via the EFI stub:
>>> - it can be passed as a initrd= command line option when doing a pure PE
>>>     boot (as opposed to the EFI handover protocol that exists for x86)
>>> - otherwise, the bootloader or firmware can load the initrd into memory,
>>>     and pass the address and size via the bootparams struct (x86) or
>>>     device tree (ARM)
>>>
>>> In the first case, we are limited to loading from the same file system
>>> that the kernel was loaded from, and it is also problematic in a trusted
>>
>> Hello Ard,
>>
>> "same file system" is not a limitation of using a command line
>> parameter. Any device path can be passed as a string.
>>
>
> What do you mean? The current implementation opens the volume via the
> loaded_image_info struct, and finds the file based on its filename,
> not on a device path. So how can it access files on other file
> systems?
>

I talked aobut the information can be transmitted in a parameter not
about the restrictions the current Linux command line implementation has.

If you would pass a complete device path as parameter, you could use the
UEFI API to find the device with block file system and use the
EFI_SIMPLE_FILE_SYSTEM_PROTOCOL to load the file.

>
>>> boot context, given that we cannot easily protect the command line from
>>> tampering without either adding complicated white/blacklisting of boot
>>> arguments or locking down the command line altogether.
>>
>> Not relying on the command line for finding the initrd image does not
>> secure the integrity and the validity of the initrd image.
>>
>
> It does. It ensures that [signed] bootloader code is in charge of
> providing the initrd at the point during the boot where the kernel is
> ready to consume this data.
>
>> A signature on the initrd image could solve the security problem you
>> describe. It would not require non-Linux software to be changed, and
>> would provide much better security.
>>
>
> A signed initrd would be useful, too, but it doesn't fix the whole problem.
>
> Linux does not support signed initrds today, and this feature permits
> a firmware implementation to do something very similar, i.e., it
> permits the bootloader to perform the verification as it is passed to
> the kernel.

One source of changed initrds is update-initramfs called in an operating
system update process.

How shall a bootloader verify the new initrd if we do not define what a
signed initrd looks like?

Would a bootloader be in a better position to verify an intird then
Linux which already has code for file verification used when loading
modules?

>
>
>>>
>>> In the second case, we force the bootloader to duplicate knowledge about
>>> the boot protocol which is already encoded in the stub, and which may be
>>> subject to change over time, e.g., bootparams struct definitions, memory
>>> allocation/alignment requirements for the placement of the initrd etc etc.
>>> In the ARM case, it also requires the bootloader to modify the hardware
>>> description provided by the firmware, as it is passed in the same file.
>>> On systems where the initrd is measured after loading, it creates a time
>>> window where the initrd contents might be manipulated in memory before
>>> handing over to the kernel.
>>>
>>> Address these concerns by adding support for loading the initrd into
>>> memory by invoking the EFI LoadFile2 protocol installed on a vendor
>>> GUIDed device path that specifically designates a Linux initrd.
>>> This addresses the above concerns, by putting the EFI stub in charge of
>>> placement in memory and of passing the base and size to the kernel proper
>>> (via whatever means it desires) while still leaving it up to the firmware
>>> or bootloader to obtain the file contents, potentially from other file
>>> systems than the one the kernel itself was loaded from. On platforms that
>>> implement measured boot, it permits the firmware to take the measurement
>>> right before the kernel actually consumes the contents.
>>
>> A firmware implementing the UEFI standard will not be aware of any
>> initrd image as such an object does not exist in the standard. It was a
>> wise decision that the UEFI standard is operating system agnostic
>> (accomodating BSD, Linux, Windows, etc.). So the firmware (EDK2, U-Boot,
>> etc.) seems to be out of scope for providing a Linux specific
>> EFI_LOAD_FILE2_PROTOCOL.
>>
>
> You know we are currently patching bootparams struct and DTs to
> provide the initrd information, right? And we have code that knows
> about low/high memory limits, alignment, etc, that is different per
> architecture.
>
>> When booting via GRUB it will be GRUB knowing which initrd to load.
>>
>
> Exactly, which is why GRUB will implement this protocol. That way, it
> does not have to touch the DT at all, or create a bootparams struct
> from setup data and inspect the various flags about placement,
> alignment, preferred addresses, etc.
>
>> Please, indicate which software you expect to expose the initrd related
>> EFI_LOAD_FILE2_PROTOCOL.
>>
>
> The primary use case is GRUB and other intermediate loaders, since it
> would remove any need for these components to know any such details.
> My aim is to make the next architecture that gets added to GRUB for
> EFI boot 100% generic.
>
>> Using an UEFI variable for passing the initrd device path would be a
>> leaner solution on the bootloader side than requiring an extra
>> EFI_LOAD_FILE2_PROTOCOL implementation.
>>
>
> This would also require kernel changes, since we don't currently load
> initrds from arbitrary device paths. The EFI_FILE_PROTOCOL is much
> more complicated than needed, and it doesn't work well with mixed
> mode. It also requires GRUB to expose the filesystem it loads the
> initrd from via EFI protocols, which is currently unnecessary and
> therefore not implemented.

This means you move the complexity of EFI_FILE_PROTOCOL from Linux to GRUB.

I would not have a problem if this would only touch GRUB. But if listen
to Ilias we are replacing one implementation in Linux by one in GRUB and
one in U-Boot and one in EDK2 and one in any other firmware.

>
> Also, using an EFI variable defeats the purpose. The whole point of
> this is making it more likely that the kernel loaded the initrd that
> the bootloader or firmware intended it to load, and having a piece of
> simple [signed] code that implements this is the easiest way to
> achieve that.

At least on my Debian system it is the operating system creating initrd
and defining which initrd matches which kernel. GRUB simply assumes that
files ending on the same version number match. Therefore I would say
Linux hopes that GRUB loads what Linux intended.

The chain of trust would not be broken if the kernel were responsible
for loading the initrd and for checking if it matches the kernel. Linux
already does this for the kernel modules in initrd.

>
> For u-boot, it should be trivial to implement a simple LoadFile2
> protocol wrapper around EFI_FILE_PROTOCOL that can be installed on a
> handle that also carries EFI_FILE_PROTOCOL.
>

A U-Boot implementation of the EFI_LOAD_FILE2_PROTOCOL would need a
device path variable to find the block device and to open the
EFI_SIMPLE_FILE_SYSTEM_PROTOCOL before accessing the file.

Linux would not be needing more lines and we would not repeat the same
code in GRUB, U-Boot, EDK2, etc.

As said Linux updates the initrd often. If that file is not signed by
Linux in a well defined way, do not expect any security at all.

If Linux does not tell which kernel matches which initrd, how should
U-Boot know? - How do you plan to transfer this piece of information?

>>>
>>> Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
>>> ---
>>>    drivers/firmware/efi/libstub/arm-stub.c        | 16 +++--
>>>    drivers/firmware/efi/libstub/efi-stub-helper.c | 65 ++++++++++++++++++++
>>>    drivers/firmware/efi/libstub/efistub.h         | 12 ++++
>>>    drivers/firmware/efi/libstub/x86-stub.c        | 36 ++++++++++-
>>>    include/linux/efi.h                            |  1 +
>>>    5 files changed, 123 insertions(+), 7 deletions(-)
>>>
>>> diff --git a/drivers/firmware/efi/libstub/arm-stub.c b/drivers/firmware/efi/libstub/arm-stub.c
>>> index c7b091f50e55..1db943c1ba2b 100644
>>> --- a/drivers/firmware/efi/libstub/arm-stub.c
>>> +++ b/drivers/firmware/efi/libstub/arm-stub.c
>>> @@ -157,6 +157,7 @@ unsigned long efi_entry(void *handle, efi_system_table_t *sys_table_arg,
>>>        enum efi_secureboot_mode secure_boot;
>>>        struct screen_info *si;
>>>        efi_properties_table_t *prop_tbl;
>>> +     unsigned long max_addr;
>>>
>>>        sys_table = sys_table_arg;
>>>
>>> @@ -255,11 +256,18 @@ unsigned long efi_entry(void *handle, efi_system_table_t *sys_table_arg,
>>>        if (!fdt_addr)
>>>                pr_efi("Generating empty DTB\n");
>>>
>>> -     status = efi_load_initrd(image, ULONG_MAX,
>>> -                              efi_get_max_initrd_addr(dram_base, *image_addr),
>>> -                              &initrd_addr, &initrd_size);
>>> +     max_addr = efi_get_max_initrd_addr(dram_base, *image_addr);
>>> +     status = efi_load_initrd_devpath(&initrd_addr, &initrd_size, max_addr);
>>> +     if (status == EFI_SUCCESS)
>>> +             pr_efi("Loaded initrd from LINUX_EFI_INITRD_MEDIA_GUID device path\n");
>>> +     else if (status == EFI_NOT_FOUND) {
>>> +             status = efi_load_initrd(image, ULONG_MAX, max_addr,
>>> +                                      &initrd_addr, &initrd_size);
>>> +             if (status == EFI_SUCCESS)
>>> +                     pr_efi("Loaded initrd from command line option\n");
>>> +     }

As already mentioned in another mail: If the initrd intended to be
loaded by the the EFI_LOAD_FILE2_PROTOCOL, you fall back to the old
behavior. So the security is not increased by this patch.

>>>        if (status != EFI_SUCCESS)
>>> -             pr_efi_err("Failed initrd from command line!\n");
>>> +             pr_efi_err("Failed to load initrd!\n");
>>>
>>>        efi_random_get_seed();
>>>
>>> diff --git a/drivers/firmware/efi/libstub/efi-stub-helper.c b/drivers/firmware/efi/libstub/efi-stub-helper.c
>>> index 8e60a39df3c5..eaf45ea749b3 100644
>>> --- a/drivers/firmware/efi/libstub/efi-stub-helper.c
>>> +++ b/drivers/firmware/efi/libstub/efi-stub-helper.c
>>> @@ -323,3 +323,68 @@ void efi_char16_printk(efi_char16_t *str)
>>>        efi_call_proto(efi_table_attr(efi_system_table(), con_out),
>>>                       output_string, str);
>>>    }
>>> +
>>> +static const struct {
>>> +     struct efi_vendor_dev_path      vendor;
>>> +     struct efi_generic_dev_path     end;
>>> +} __packed initrd_devpath = {
>>> +     {
>>> +             EFI_DEV_MEDIA,
>>> +             EFI_DEV_MEDIA_VENDOR,
>>> +             sizeof(struct efi_vendor_dev_path),
>>> +             LINUX_EFI_INITRD_MEDIA_GUID
>>> +     }, {
>>> +             EFI_DEV_END_PATH,
>>> +             EFI_DEV_END_ENTIRE,
>>> +             sizeof(struct efi_generic_dev_path)
>>> +     }
>>> +};
>>> +
>>> +efi_status_t efi_load_initrd_devpath(unsigned long *load_addr,
>>> +                                  unsigned long *load_size,
>>> +                                  unsigned long max)
>>> +{
>>> +     efi_guid_t lf2_proto_guid = EFI_LOAD_FILE2_PROTOCOL_GUID;
>>> +     efi_device_path_protocol_t *dp;
>>> +     efi_load_file2_protocol_t *lf2;
>>> +     unsigned long initrd_addr;
>>> +     unsigned long initrd_size;
>>> +     efi_handle_t handle;
>>> +     efi_status_t status;
>>> +
>>> +     if (!load_addr || !load_size)
>>> +             return EFI_INVALID_PARAMETER;
>>> +
>>> +     dp = (efi_device_path_protocol_t *)&initrd_devpath;
>>> +     status = efi_bs_call(locate_device_path, &lf2_proto_guid, &dp, &handle);
>>> +     if (status != EFI_SUCCESS)
>>> +             return status;
>>> +
>>> +     status = efi_bs_call(handle_protocol, handle, &lf2_proto_guid,
>>> +                          (void **)&lf2);
>>> +     if (status != EFI_SUCCESS)
>>> +             return status;
>>
>> You require here that there is a handle exposing the device path
>> protocol with the initrd specific device path. On the same handle the
>> EFI_LOAD_FILE2_PROTOCOL must be installed which will load the initrd
>> file when called with the same device path.
>>
>
> Exactly.
>
>> An alternative implementation would simple loop over all instances of
>> the EFI_LOAD_FILE2_PROTOCOL and try to load the initrd.
>>
>
> How do I distinguish the initrd from other EFI_LOAD_FILE2_PROTOCOL
> instances? For instance, PCI option ROMs are also exposed as
> EFI_LOAD_FILE2_PROTOCOL.

These would respond with EFI_NOT_FOUND. The advantage of looping over
all instances could be that the same handle could be used to provide
multiple files. But how this is implemented is the least of my worries.

Best regards

Heinrich

>
>> It would be worthwhile to describe the requirements on the
>> implementation of the EFI_LOAD_FILE2_PROTOCOL in a code comment and in
>> the documentation.
>>
>> Unfortunately the documentation of UEFI has been duplicated into two files:
>>
>> Documentation/arm/uefi.rst
>> Documentation/x86/x86_64/uefi.rst
>>
>
> Yes, that is a good point. I will work on factoring out the generic
> parts and share them.
>
>
> Thanks for the review,
> Ard.
>
>
>
>>
>>> +
>>> +     initrd_size = 0;
>>> +     status = efi_call_proto(lf2, load_file,
>>> +                             (efi_device_path_protocol_t *)&initrd_devpath,
>>> +                             false, &initrd_size, NULL);
>>> +     if (status != EFI_BUFFER_TOO_SMALL)
>>> +             return EFI_LOAD_ERROR;
>>> +
>>> +     status = efi_allocate_pages(initrd_size, &initrd_addr, max);
>>> +     if (status != EFI_SUCCESS)
>>> +             return status;
>>> +
>>> +     status = efi_call_proto(lf2, load_file,
>>> +                             (efi_device_path_protocol_t *)&initrd_devpath,
>>> +                             false, &initrd_size, (void *)initrd_addr);
>>> +     if (status != EFI_SUCCESS) {
>>> +             efi_free(initrd_size, initrd_addr);
>>> +             return status;
>>> +     }
>>> +
>>> +     *load_addr = initrd_addr;
>>> +     *load_size = initrd_size;
>>> +     return EFI_SUCCESS;
>>> +}
>>> diff --git a/drivers/firmware/efi/libstub/efistub.h b/drivers/firmware/efi/libstub/efistub.h
>>> index 99e93fd76ec5..fbf9f9442eed 100644
>>> --- a/drivers/firmware/efi/libstub/efistub.h
>>> +++ b/drivers/firmware/efi/libstub/efistub.h
>>> @@ -566,6 +566,14 @@ union efi_load_file_protocol {
>>>        } mixed_mode;
>>>    };
>>>
>>> +struct efi_vendor_dev_path {
>>> +     u8              type;
>>> +     u8              sub_type;
>>> +     u16             length;
>>> +     efi_guid_t      vendorguid;
>>> +     u8              vendordata[];
>>> +} __packed;
>>> +
>>>    void efi_pci_disable_bridge_busmaster(void);
>>>
>>>    typedef efi_status_t (*efi_exit_boot_map_processing)(
>>> @@ -651,4 +659,8 @@ efi_status_t efi_load_initrd(efi_loaded_image_t *image,
>>>                             unsigned long *load_addr,
>>>                             unsigned long *load_size);
>>>
>>> +efi_status_t efi_load_initrd_devpath(unsigned long *load_addr,
>>> +                                  unsigned long *load_size,
>>> +                                  unsigned long max);
>>> +
>>>    #endif
>>> diff --git a/drivers/firmware/efi/libstub/x86-stub.c b/drivers/firmware/efi/libstub/x86-stub.c
>>> index f3e2ff31b624..7f38f95676dd 100644
>>> --- a/drivers/firmware/efi/libstub/x86-stub.c
>>> +++ b/drivers/firmware/efi/libstub/x86-stub.c
>>> @@ -419,9 +419,20 @@ efi_status_t __efiapi efi_pe_entry(efi_handle_t handle,
>>>        if (status != EFI_SUCCESS)
>>>                goto fail2;
>>>
>>> -     status = efi_load_initrd(image, hdr->initrd_addr_max,
>>> -                              above4g ? ULONG_MAX : hdr->initrd_addr_max,
>>> -                              &ramdisk_addr, &ramdisk_size);
>>> +     /*
>>> +      * The initrd loaded from the Linux initrd vendor device
>>> +      * path should take precedence, as we don't want the
>>> +      * [unverified] command line to override the initrd
>>> +      * supplied by the [potentially verified] firmware.
>>> +      */
>>> +     status = efi_load_initrd_devpath(&ramdisk_addr, &ramdisk_size,
>>> +                                      above4g ? ULONG_MAX
>>> +                                              : hdr->initrd_addr_max);
>>> +     if (status == EFI_NOT_FOUND)
>>> +             status = efi_load_initrd(image, hdr->initrd_addr_max,
>>> +                                      above4g ? ULONG_MAX
>>> +                                              : hdr->initrd_addr_max,
>>> +                                      &ramdisk_addr, &ramdisk_size);
>>>        if (status != EFI_SUCCESS)
>>>                goto fail2;
>>>        hdr->ramdisk_image = ramdisk_addr & 0xffffffff;
>>> @@ -732,6 +743,25 @@ struct boot_params *efi_main(efi_handle_t handle,
>>>                         ((u64)boot_params->ext_cmd_line_ptr << 32));
>>>        efi_parse_options((char *)cmdline_paddr);
>>>
>>> +     if (!hdr->ramdisk_size && !boot_params->ext_ramdisk_size) {
>>> +             unsigned long max = hdr->initrd_addr_max;
>>> +             unsigned long addr, size;
>>> +
>>> +             if (hdr->xloadflags & XLF_CAN_BE_LOADED_ABOVE_4G)
>>> +                     max = ULONG_MAX;
>>> +
>>> +             status = efi_load_initrd_devpath(&addr, &size, max);
>>> +             if (status == EFI_SUCCESS) {
>>> +                     hdr->ramdisk_image              = (u32)addr;
>>> +                     hdr->ramdisk_size               = (u32)size;
>>> +                     boot_params->ext_ramdisk_image  = (u64)addr >> 32;
>>> +                     boot_params->ext_ramdisk_size   = (u64)size >> 32;
>>> +             } else if (status != EFI_NOT_FOUND) {
>>> +                     efi_printk("efi_load_initrd_devpath() failed!\n");
>>> +                     goto fail;
>>> +             }
>>> +     }
>>> +
>>>        /*
>>>         * If the boot loader gave us a value for secure_boot then we use that,
>>>         * otherwise we ask the BIOS.
>>> diff --git a/include/linux/efi.h b/include/linux/efi.h
>>> index 9ccf313fe9de..75c83c322c40 100644
>>> --- a/include/linux/efi.h
>>> +++ b/include/linux/efi.h
>>> @@ -353,6 +353,7 @@ void efi_native_runtime_setup(void);
>>>    #define LINUX_EFI_TPM_EVENT_LOG_GUID                EFI_GUID(0xb7799cb0, 0xeca2, 0x4943,  0x96, 0x67, 0x1f, 0xae, 0x07, 0xb7, 0x47, 0xfa)
>>>    #define LINUX_EFI_TPM_FINAL_LOG_GUID                EFI_GUID(0x1e2ed096, 0x30e2, 0x4254,  0xbd, 0x89, 0x86, 0x3b, 0xbe, 0xf8, 0x23, 0x25)
>>>    #define LINUX_EFI_MEMRESERVE_TABLE_GUID             EFI_GUID(0x888eb0c6, 0x8ede, 0x4ff5,  0xa8, 0xf0, 0x9a, 0xee, 0x5c, 0xb9, 0x77, 0xc2)
>>> +#define LINUX_EFI_INITRD_MEDIA_GUID          EFI_GUID(0x5568e427, 0x68fc, 0x4f3d,  0xac, 0x74, 0xca, 0x55, 0x52, 0x31, 0xcc, 0x68)
>>>
>>>    /* OEM GUIDs */
>>>    #define DELLEMC_EFI_RCI2_TABLE_GUID         EFI_GUID(0x2d9f28a2, 0xa886, 0x456a,  0x97, 0xa8, 0xf1, 0x1e, 0xf2, 0x4f, 0xf4, 0x55)
>>>
>>


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  reply	other threads:[~2020-02-07  0:01 UTC|newest]

Thread overview: 77+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-02-06 14:03 [PATCH 0/2] arch-agnostic initrd loading method for EFI systems Ard Biesheuvel
2020-02-06 14:03 ` Ard Biesheuvel
2020-02-06 14:03 ` [PATCH 1/2] efi/libstub: add support for loading the initrd from a device path Ard Biesheuvel
2020-02-06 14:03   ` Ard Biesheuvel
2020-02-06 18:26   ` Heinrich Schuchardt
2020-02-06 18:26     ` Heinrich Schuchardt
2020-02-06 18:46     ` Ilias Apalodimas
2020-02-06 18:46       ` Ilias Apalodimas
2020-02-06 19:15       ` Heinrich Schuchardt
2020-02-06 19:15         ` Heinrich Schuchardt
2020-02-06 20:09         ` Ilias Apalodimas
2020-02-06 20:09           ` Ilias Apalodimas
2020-02-06 22:49           ` Heinrich Schuchardt
2020-02-06 22:49             ` Heinrich Schuchardt
2020-02-07  7:35             ` Ilias Apalodimas
2020-02-07  7:35               ` Ilias Apalodimas
2020-02-06 22:35     ` Ard Biesheuvel
2020-02-06 22:35       ` Ard Biesheuvel
2020-02-07  0:01       ` Heinrich Schuchardt [this message]
2020-02-07  0:01         ` Heinrich Schuchardt
2020-02-07  0:21         ` Ard Biesheuvel
2020-02-07  0:21           ` Ard Biesheuvel
2020-02-07  0:57           ` Heinrich Schuchardt
2020-02-07  0:57             ` Heinrich Schuchardt
2020-02-07  8:12             ` Ard Biesheuvel
2020-02-07  8:12               ` Ard Biesheuvel
2020-02-07 13:30               ` Heinrich Schuchardt
2020-02-07 13:30                 ` Heinrich Schuchardt
2020-02-07 13:58                 ` Ard Biesheuvel
2020-02-07 13:58                   ` Ard Biesheuvel
2020-02-07 14:18                   ` Alexander Graf
2020-02-07 14:18                     ` Alexander Graf
2020-02-07 15:30                     ` Ard Biesheuvel
2020-02-07 15:30                       ` Ard Biesheuvel
2020-02-07 15:35                     ` Heinrich Schuchardt
2020-02-07 15:35                       ` Heinrich Schuchardt
2020-02-07 11:09       ` Laszlo Ersek
2020-02-07 11:09         ` Laszlo Ersek
2020-02-07 11:03     ` Laszlo Ersek
2020-02-07 11:03       ` Laszlo Ersek
2020-02-07  9:48   ` Laszlo Ersek
2020-02-07  9:48     ` Laszlo Ersek
2020-02-07 12:36     ` Ard Biesheuvel
2020-02-07 12:36       ` Ard Biesheuvel
2020-02-10 14:26       ` Laszlo Ersek
2020-02-10 14:26         ` Laszlo Ersek
2020-02-09  6:39   ` Lukas Wunner
2020-02-09 11:35     ` Ard Biesheuvel
2020-02-09 11:35       ` Ard Biesheuvel
2020-02-06 14:03 ` [PATCH 2/2] efi/libstub: take noinitrd cmdline argument into account for devpath initrd Ard Biesheuvel
2020-02-06 14:03   ` Ard Biesheuvel
2020-02-06 18:33   ` Heinrich Schuchardt
2020-02-06 18:33     ` Heinrich Schuchardt
2020-02-06 23:44     ` Ard Biesheuvel
2020-02-06 23:44       ` Ard Biesheuvel
2020-02-12 16:01   ` Peter Jones
2020-02-12 16:01     ` Peter Jones
2020-02-07  9:09 ` [PATCH 0/2] arch-agnostic initrd loading method for EFI systems Laszlo Ersek
2020-02-07  9:09   ` Laszlo Ersek
2020-02-07  9:22   ` Laszlo Ersek
2020-02-07  9:22     ` Laszlo Ersek
2020-02-07 12:23     ` Ard Biesheuvel
2020-02-07 12:23       ` Ard Biesheuvel
2020-02-07 16:20       ` James Bottomley
2020-02-07 16:20         ` James Bottomley
2020-02-07 18:31         ` Ard Biesheuvel
2020-02-07 18:31           ` Ard Biesheuvel
2020-02-07 19:54           ` James Bottomley
2020-02-07 19:54             ` James Bottomley
2020-02-07 20:03             ` Ard Biesheuvel
2020-02-07 20:03               ` Ard Biesheuvel
2020-02-07 18:45 ` Arvind Sankar
2020-02-07 18:45   ` Arvind Sankar
2020-02-07 19:47   ` Ard Biesheuvel
2020-02-07 19:47     ` Ard Biesheuvel
2020-02-07 20:26     ` Arvind Sankar
2020-02-07 20:26       ` Arvind Sankar

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=b2535bc9-f9be-e250-4da1-bce0b67abb6f@gmx.de \
    --to=xypron.glpk@gmx.de \
    --cc=agraf@csgraf.de \
    --cc=ard.biesheuvel@linaro.org \
    --cc=ardb@kernel.org \
    --cc=daniel.kiper@oracle.com \
    --cc=ilias.apalodimas@linaro.org \
    --cc=leif@nuviainc.com \
    --cc=lersek@redhat.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-efi@vger.kernel.org \
    --cc=mjg59@google.com \
    --cc=pjones@redhat.com \
    --subject='Re: [PATCH 1/2] efi/libstub: add support for loading the initrd from a device path' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.