From mboxrd@z Thu Jan 1 00:00:00 1970 From: Michal Simek Date: Tue, 6 Dec 2016 13:59:25 +0100 Subject: [U-Boot] [PATCH v3 3/4] mmc: zynq: Determine base clock frequency via clock framework In-Reply-To: <96e66248-6610-42c4-0701-0b0b6b045bce@samsung.com> References: <1480685077-16678-1-git-send-email-stefan.herbrechtsmeier@weidmueller.de> <1480685077-16678-4-git-send-email-stefan.herbrechtsmeier@weidmueller.de> <96e66248-6610-42c4-0701-0b0b6b045bce@samsung.com> Message-ID: List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On 5.12.2016 23:22, Jaehoon Chung wrote: > On 12/02/2016 10:24 PM, stefan.herbrechtsmeier at weidmueller.de wrote: >> From: Stefan Herbrechtsmeier >> >> The zynq_sdhci controller driver use CONFIG_ZYNQ_SDHCI_MAX_FREQ as base >> clock frequency but this clock is not fixed and depends on the hardware >> configuration. Additionally the value of CONFIG_ZYNQ_SDHCI_MAX_FREQ >> doesn't match the real base clock frequency of SDIO_FREQ. Use the clock >> framework to determine the frequency at run time. >> >> Signed-off-by: Stefan Herbrechtsmeier > > > Even if this patch is delegated to Michal, i picked to this. > Applied on u-boot-mmc. > Based on my reply in v2 this is not ideal patch http://lists.denx.de/pipermail/u-boot/2016-November/274310.html Not a problem to take these patches should mmc tree but please wait till you have Ack from me. Thanks, Michal