All of lore.kernel.org
 help / color / mirror / Atom feed
From: <Claudiu.Beznea@microchip.com>
To: <krzysztof.kozlowski@linaro.org>, <arm@kernel.org>,
	<soc@kernel.org>, <arnd@arndb.de>, <olof@lixom.net>,
	<robh+dt@kernel.org>, <krzysztof.kozlowski+dt@linaro.org>,
	<Nicolas.Ferre@microchip.com>, <alexandre.belloni@bootlin.com>,
	<peda@axentia.se>, <devicetree@vger.kernel.org>,
	<linux-arm-kernel@lists.infradead.org>,
	<linux-kernel@vger.kernel.org>
Subject: Re: [PATCH v3 38/40] ARM: dts: at91: align gpio-key node names with dtschema
Date: Thu, 16 Jun 2022 07:41:24 +0000	[thread overview]
Message-ID: <b439cb26-b27d-450b-8a49-d75ec92e31b5@microchip.com> (raw)
In-Reply-To: <20220616005333.18491-38-krzysztof.kozlowski@linaro.org>

On 16.06.2022 03:53, Krzysztof Kozlowski wrote:
> EXTERNAL EMAIL: Do not click links or open attachments unless you know the content is safe
> 
> The node names should be generic and DT schema expects certain pattern
> (e.g. with key/button/switch).
> 
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>


> 
> ---
> 
> Changes since v2:
> 1. at91-sam9x60ek.dts, at91-sama5d27_wlsom1_ek.dts,
>    at91-sama5d2_icp.dts: different names according to discussion.
> ---
>  arch/arm/boot/dts/at91-foxg20.dts                |  4 ++--
>  arch/arm/boot/dts/at91-gatwick.dts               |  2 +-
>  arch/arm/boot/dts/at91-kizbox.dts                |  6 +++---
>  arch/arm/boot/dts/at91-kizbox2-common.dtsi       |  8 ++++----
>  arch/arm/boot/dts/at91-kizbox3-hs.dts            | 12 ++++++------
>  arch/arm/boot/dts/at91-kizboxmini-common.dtsi    |  4 ++--
>  arch/arm/boot/dts/at91-nattis-2-natte-2.dts      |  2 +-
>  arch/arm/boot/dts/at91-qil_a9260.dts             |  2 +-
>  arch/arm/boot/dts/at91-sam9x60ek.dts             |  4 ++--
>  arch/arm/boot/dts/at91-sama5d27_som1_ek.dts      |  4 ++--
>  arch/arm/boot/dts/at91-sama5d27_wlsom1_ek.dts    |  4 ++--
>  arch/arm/boot/dts/at91-sama5d2_icp.dts           |  4 ++--
>  arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts        |  4 ++--
>  arch/arm/boot/dts/at91-sama5d2_xplained.dts      |  4 ++--
>  arch/arm/boot/dts/at91-sama5d3_xplained.dts      |  4 ++--
>  arch/arm/boot/dts/at91-sama5d4_xplained.dts      |  4 ++--
>  arch/arm/boot/dts/at91-sama5d4ek.dts             |  4 ++--
>  arch/arm/boot/dts/at91-sama7g5ek.dts             |  4 ++--
>  arch/arm/boot/dts/at91-wb45n.dts                 |  2 +-
>  arch/arm/boot/dts/at91-wb50n.dts                 |  2 +-
>  arch/arm/boot/dts/at91sam9260ek.dts              |  6 +++---
>  arch/arm/boot/dts/at91sam9261ek.dts              | 10 +++++-----
>  arch/arm/boot/dts/at91sam9263ek.dts              |  6 +++---
>  arch/arm/boot/dts/at91sam9g20ek_common.dtsi      |  6 +++---
>  .../dts/at91sam9g25-gardena-smart-gateway.dts    |  2 +-
>  arch/arm/boot/dts/at91sam9m10g45ek.dts           | 16 ++++++++--------
>  arch/arm/boot/dts/at91sam9n12ek.dts              |  4 ++--
>  arch/arm/boot/dts/at91sam9rlek.dts               |  6 +++---
>  28 files changed, 70 insertions(+), 70 deletions(-)
> 
> diff --git a/arch/arm/boot/dts/at91-foxg20.dts b/arch/arm/boot/dts/at91-foxg20.dts
> index 7edf057047f8..9dfd5de808d1 100644
> --- a/arch/arm/boot/dts/at91-foxg20.dts
> +++ b/arch/arm/boot/dts/at91-foxg20.dts
> @@ -155,10 +155,10 @@ user_led {
>                 };
>         };
> 
> -       gpio_keys {
> +       gpio-keys {
>                 compatible = "gpio-keys";
> 
> -               btn {
> +               button {
>                         label = "Button";
>                         gpios = <&pioC 4 GPIO_ACTIVE_LOW>;
>                         linux,code = <0x103>;
> diff --git a/arch/arm/boot/dts/at91-gatwick.dts b/arch/arm/boot/dts/at91-gatwick.dts
> index 5a81cab5fc3a..2c718cf84d7b 100644
> --- a/arch/arm/boot/dts/at91-gatwick.dts
> +++ b/arch/arm/boot/dts/at91-gatwick.dts
> @@ -13,7 +13,7 @@ / {
>         model = "Laird Workgroup Bridge 50N - Project Gatwick";
>         compatible = "laird,gatwick", "laird,wb50n", "atmel,sama5d31", "atmel,sama5d3", "atmel,sama5";
> 
> -       gpio_keys {
> +       gpio-keys {
>                 compatible = "gpio-keys";
>                 autorepeat;
> 
> diff --git a/arch/arm/boot/dts/at91-kizbox.dts b/arch/arm/boot/dts/at91-kizbox.dts
> index 3b8812fcd854..87e972eb2ba6 100644
> --- a/arch/arm/boot/dts/at91-kizbox.dts
> +++ b/arch/arm/boot/dts/at91-kizbox.dts
> @@ -28,19 +28,19 @@ main_xtal {
>                 };
>         };
> 
> -       gpio_keys {
> +       gpio-keys {
>                 compatible = "gpio-keys";
>                 #address-cells = <1>;
>                 #size-cells = <0>;
> 
> -               reset {
> +               button-reset {
>                         label = "PB_RST";
>                         gpios = <&pioB 30 GPIO_ACTIVE_HIGH>;
>                         linux,code = <0x100>;
>                         wakeup-source;
>                 };
> 
> -               user {
> +               button-user {
>                         label = "PB_USER";
>                         gpios = <&pioB 31 GPIO_ACTIVE_HIGH>;
>                         linux,code = <0x101>;
> diff --git a/arch/arm/boot/dts/at91-kizbox2-common.dtsi b/arch/arm/boot/dts/at91-kizbox2-common.dtsi
> index c08834ddf07b..ed7146e23147 100644
> --- a/arch/arm/boot/dts/at91-kizbox2-common.dtsi
> +++ b/arch/arm/boot/dts/at91-kizbox2-common.dtsi
> @@ -31,26 +31,26 @@ main_xtal {
>                 };
>         };
> 
> -       gpio_keys {
> +       gpio-keys {
>                 compatible = "gpio-keys";
>                 #address-cells = <1>;
>                 #size-cells = <0>;
> 
> -               prog {
> +               button-prog {
>                         label = "PB_PROG";
>                         gpios = <&pioE 27 GPIO_ACTIVE_LOW>;
>                         linux,code = <0x102>;
>                         wakeup-source;
>                 };
> 
> -               reset {
> +               button-reset {
>                         label = "PB_RST";
>                         gpios = <&pioE 29 GPIO_ACTIVE_LOW>;
>                         linux,code = <0x100>;
>                         wakeup-source;
>                 };
> 
> -               user {
> +               button-user {
>                         label = "PB_USER";
>                         gpios = <&pioE 31 GPIO_ACTIVE_HIGH>;
>                         linux,code = <0x101>;
> diff --git a/arch/arm/boot/dts/at91-kizbox3-hs.dts b/arch/arm/boot/dts/at91-kizbox3-hs.dts
> index 2799b2a1f4d2..f76e2e0b41ae 100644
> --- a/arch/arm/boot/dts/at91-kizbox3-hs.dts
> +++ b/arch/arm/boot/dts/at91-kizbox3-hs.dts
> @@ -55,7 +55,7 @@ led-6 {
>                 };
>         };
> 
> -       gpio_keys {
> +       gpio-keys {
>                 compatible = "gpio-keys";
>                 pinctrl-names = "default" , "default", "default",
>                                 "default", "default" ;
> @@ -68,35 +68,35 @@ &pinctrl_pio_io_reset
>                              &pinctrl_pio_zbe_rst>;
>                 pinctrl-4 = <&pinctrl_pio_input>;
> 
> -               SW1 {
> +               switch-1 {
>                         label = "SW1";
>                         gpios = <&pioA PIN_PA29 GPIO_ACTIVE_LOW>;
>                         linux,code = <0x101>;
>                         wakeup-source;
>                 };
> 
> -               SW2 {
> +               switch-2 {
>                         label = "SW2";
>                         gpios = <&pioA PIN_PA18 GPIO_ACTIVE_LOW>;
>                         linux,code = <0x102>;
>                         wakeup-source;
>                 };
> 
> -               SW3 {
> +               switch-3 {
>                         label = "SW3";
>                         gpios = <&pioA PIN_PA22 GPIO_ACTIVE_LOW>;
>                         linux,code = <0x103>;
>                         wakeup-source;
>                 };
> 
> -               SW7 {
> +               switch-7 {
>                         label = "SW7";
>                         gpios = <&pioA PIN_PA26 GPIO_ACTIVE_LOW>;
>                         linux,code = <0x107>;
>                         wakeup-source;
>                 };
> 
> -               SW8 {
> +               switch-8 {
>                         label = "SW8";
>                         gpios = <&pioA PIN_PA24 GPIO_ACTIVE_LOW>;
>                         linux,code = <0x108>;
> diff --git a/arch/arm/boot/dts/at91-kizboxmini-common.dtsi b/arch/arm/boot/dts/at91-kizboxmini-common.dtsi
> index 9c622892c692..8fb08e6fad7a 100644
> --- a/arch/arm/boot/dts/at91-kizboxmini-common.dtsi
> +++ b/arch/arm/boot/dts/at91-kizboxmini-common.dtsi
> @@ -39,14 +39,14 @@ gpio_keys {
>                 #address-cells = <1>;
>                 #size-cells = <0>;
> 
> -               prog {
> +               key-prog {
>                         label = "PB_PROG";
>                         gpios = <&pioC 17 GPIO_ACTIVE_LOW>;
>                         linux,code = <0x102>;
>                         wakeup-source;
>                 };
> 
> -               reset {
> +               key-reset {
>                         label = "PB_RST";
>                         gpios = <&pioC 16 GPIO_ACTIVE_LOW>;
>                         linux,code = <0x100>;
> diff --git a/arch/arm/boot/dts/at91-nattis-2-natte-2.dts b/arch/arm/boot/dts/at91-nattis-2-natte-2.dts
> index 4f123477e631..f71377c9b757 100644
> --- a/arch/arm/boot/dts/at91-nattis-2-natte-2.dts
> +++ b/arch/arm/boot/dts/at91-nattis-2-natte-2.dts
> @@ -18,7 +18,7 @@ / {
>         gpio-keys {
>                 compatible = "gpio-keys";
> 
> -               wakeup {
> +               key-wakeup {
>                         label = "Wakeup";
>                         linux,code = <10>;
>                         wakeup-source;
> diff --git a/arch/arm/boot/dts/at91-qil_a9260.dts b/arch/arm/boot/dts/at91-qil_a9260.dts
> index 969d990767fc..d09b3d15a828 100644
> --- a/arch/arm/boot/dts/at91-qil_a9260.dts
> +++ b/arch/arm/boot/dts/at91-qil_a9260.dts
> @@ -201,7 +201,7 @@ gpio_keys {
>                 #address-cells = <1>;
>                 #size-cells = <0>;
> 
> -               user_pb {
> +               button-user {
>                         label = "user_pb";
>                         gpios = <&pioB 10 GPIO_ACTIVE_LOW>;
>                         linux,code = <28>;
> diff --git a/arch/arm/boot/dts/at91-sam9x60ek.dts b/arch/arm/boot/dts/at91-sam9x60ek.dts
> index 7719ea3d4933..838353a42097 100644
> --- a/arch/arm/boot/dts/at91-sam9x60ek.dts
> +++ b/arch/arm/boot/dts/at91-sam9x60ek.dts
> @@ -76,13 +76,13 @@ vdd2_3v3: regulator-fixed-vdd2_3v3@3 {
>                 };
>         };
> 
> -       gpio_keys {
> +       gpio-keys {
>                 compatible = "gpio-keys";
>                 pinctrl-names = "default";
>                 pinctrl-0 = <&pinctrl_key_gpio_default>;
>                 status = "okay";
> 
> -               sw1 {
> +               button-1 {
>                         label = "SW1";
>                         gpios = <&pioD 18 GPIO_ACTIVE_LOW>;
>                         linux,code=<KEY_PROG1>;
> diff --git a/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts b/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts
> index 08f0d4b995ff..96c9290007a8 100644
> --- a/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts
> +++ b/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts
> @@ -478,13 +478,13 @@ can1: can@fc050000 {
>                 };
>         };
> 
> -       gpio_keys {
> +       gpio-keys {
>                 compatible = "gpio-keys";
> 
>                 pinctrl-names = "default";
>                 pinctrl-0 = <&pinctrl_key_gpio_default>;
> 
> -               pb4 {
> +               button {
>                         label = "USER";
>                         gpios = <&pioA PIN_PA29 GPIO_ACTIVE_LOW>;
>                         linux,code = <KEY_PROG1>;
> diff --git a/arch/arm/boot/dts/at91-sama5d27_wlsom1_ek.dts b/arch/arm/boot/dts/at91-sama5d27_wlsom1_ek.dts
> index 5e8755f22784..b55e8fb113b1 100644
> --- a/arch/arm/boot/dts/at91-sama5d27_wlsom1_ek.dts
> +++ b/arch/arm/boot/dts/at91-sama5d27_wlsom1_ek.dts
> @@ -26,14 +26,14 @@ chosen {
>                 stdout-path = "serial0:115200n8";
>         };
> 
> -       gpio_keys {
> +       gpio-keys {
>                 compatible = "gpio-keys";
> 
>                 pinctrl-names = "default";
>                 pinctrl-0 = <&pinctrl_key_gpio_default>;
>                 status = "okay";
> 
> -               sw4 {
> +               button-1 {
>                         label = "USER BUTTON";
>                         gpios = <&pioA PIN_PB2 GPIO_ACTIVE_LOW>;
>                         linux,code = <KEY_PROG1>;
> diff --git a/arch/arm/boot/dts/at91-sama5d2_icp.dts b/arch/arm/boot/dts/at91-sama5d2_icp.dts
> index 806eb1d911d7..38f0e1ae6ae6 100644
> --- a/arch/arm/boot/dts/at91-sama5d2_icp.dts
> +++ b/arch/arm/boot/dts/at91-sama5d2_icp.dts
> @@ -42,14 +42,14 @@ main_xtal {
>                 };
>         };
> 
> -       gpio_keys {
> +       gpio-keys {
>                 compatible = "gpio-keys";
> 
>                 pinctrl-names = "default";
>                 pinctrl-0 = <&pinctrl_key_gpio_default>;
>                 status = "okay";
> 
> -               sw4 {
> +               button-1 {
>                         label = "USER_PB1";
>                         gpios = <&pioA PIN_PD0 GPIO_ACTIVE_LOW>;
>                         linux,code = <KEY_PROG1>;
> diff --git a/arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts b/arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts
> index 8ed58af01391..544c64549459 100644
> --- a/arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts
> +++ b/arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts
> @@ -394,13 +394,13 @@ pinctrl_usba_vbus: usba_vbus {
>                 };
>         };
> 
> -       gpio_keys {
> +       gpio-keys {
>                 compatible = "gpio-keys";
> 
>                 pinctrl-names = "default";
>                 pinctrl-0 = <&pinctrl_key_gpio_default>;
> 
> -               bp1 {
> +               button-1 {
>                         label = "PB_USER";
>                         gpios = <&pioA PIN_PA10 GPIO_ACTIVE_LOW>;
>                         linux,code = <KEY_PROG1>;
> diff --git a/arch/arm/boot/dts/at91-sama5d2_xplained.dts b/arch/arm/boot/dts/at91-sama5d2_xplained.dts
> index cdfe891f9a9e..6799c2f475b2 100644
> --- a/arch/arm/boot/dts/at91-sama5d2_xplained.dts
> +++ b/arch/arm/boot/dts/at91-sama5d2_xplained.dts
> @@ -703,13 +703,13 @@ can1: can@fc050000 {
>                 };
>         };
> 
> -       gpio_keys {
> +       gpio-keys {
>                 compatible = "gpio-keys";
> 
>                 pinctrl-names = "default";
>                 pinctrl-0 = <&pinctrl_key_gpio_default>;
> 
> -               bp1 {
> +               button {
>                         label = "PB_USER";
>                         gpios = <&pioA PIN_PB9 GPIO_ACTIVE_LOW>;
>                         linux,code = <KEY_PROG1>;
> diff --git a/arch/arm/boot/dts/at91-sama5d3_xplained.dts b/arch/arm/boot/dts/at91-sama5d3_xplained.dts
> index a49c2966b41e..1f42a6a981bf 100644
> --- a/arch/arm/boot/dts/at91-sama5d3_xplained.dts
> +++ b/arch/arm/boot/dts/at91-sama5d3_xplained.dts
> @@ -372,13 +372,13 @@ vcc_mmc0_reg: fixedregulator_mmc0 {
>                 regulator-always-on;
>         };
> 
> -       gpio_keys {
> +       gpio-keys {
>                 compatible = "gpio-keys";
> 
>                 pinctrl-names = "default";
>                 pinctrl-0 = <&pinctrl_key_gpio>;
> 
> -               bp3 {
> +               button {
>                         label = "PB_USER";
>                         gpios = <&pioE 29 GPIO_ACTIVE_LOW>;
>                         linux,code = <KEY_PROG1>;
> diff --git a/arch/arm/boot/dts/at91-sama5d4_xplained.dts b/arch/arm/boot/dts/at91-sama5d4_xplained.dts
> index e519d2747936..f122f302f8e0 100644
> --- a/arch/arm/boot/dts/at91-sama5d4_xplained.dts
> +++ b/arch/arm/boot/dts/at91-sama5d4_xplained.dts
> @@ -242,13 +242,13 @@ rootfs@800000 {
>                 };
>         };
> 
> -       gpio_keys {
> +       gpio-keys {
>                 compatible = "gpio-keys";
> 
>                 pinctrl-names = "default";
>                 pinctrl-0 = <&pinctrl_key_gpio>;
> 
> -               pb_user1 {
> +               button {
>                         label = "pb_user1";
>                         gpios = <&pioE 8 GPIO_ACTIVE_HIGH>;
>                         linux,code = <KEY_PROG1>;
> diff --git a/arch/arm/boot/dts/at91-sama5d4ek.dts b/arch/arm/boot/dts/at91-sama5d4ek.dts
> index 7017f626f362..fce4e93c6bee 100644
> --- a/arch/arm/boot/dts/at91-sama5d4ek.dts
> +++ b/arch/arm/boot/dts/at91-sama5d4ek.dts
> @@ -269,13 +269,13 @@ rootfs@800000 {
>                 };
>         };
> 
> -       gpio_keys {
> +       gpio-keys {
>                 compatible = "gpio-keys";
> 
>                 pinctrl-names = "default";
>                 pinctrl-0 = <&pinctrl_key_gpio>;
> 
> -               pb_user1 {
> +               button {
>                         label = "pb_user1";
>                         gpios = <&pioE 13 GPIO_ACTIVE_HIGH>;
>                         linux,code = <0x100>;
> diff --git a/arch/arm/boot/dts/at91-sama7g5ek.dts b/arch/arm/boot/dts/at91-sama7g5ek.dts
> index 103544620fd7..de44da2e4aae 100644
> --- a/arch/arm/boot/dts/at91-sama7g5ek.dts
> +++ b/arch/arm/boot/dts/at91-sama7g5ek.dts
> @@ -45,13 +45,13 @@ main_xtal {
>                 };
>         };
> 
> -       gpio_keys {
> +       gpio-keys {
>                 compatible = "gpio-keys";
> 
>                 pinctrl-names = "default";
>                 pinctrl-0 = <&pinctrl_key_gpio_default>;
> 
> -               bp1 {
> +               button {
>                         label = "PB_USER";
>                         gpios = <&pioA PIN_PA12 GPIO_ACTIVE_LOW>;
>                         linux,code = <KEY_PROG1>;
> diff --git a/arch/arm/boot/dts/at91-wb45n.dts b/arch/arm/boot/dts/at91-wb45n.dts
> index 54d130c92185..3e46b29412d1 100644
> --- a/arch/arm/boot/dts/at91-wb45n.dts
> +++ b/arch/arm/boot/dts/at91-wb45n.dts
> @@ -12,7 +12,7 @@ / {
>         model = "Laird Workgroup Bridge 45N - Atmel AT91SAM (dt)";
>         compatible = "laird,wb45n", "laird,wbxx", "atmel,at91sam9x5", "atmel,at91sam9";
> 
> -       gpio_keys {
> +       gpio-keys {
>                 compatible = "gpio-keys";
>                 #address-cells = <1>;
>                 #size-cells = <0>;
> diff --git a/arch/arm/boot/dts/at91-wb50n.dts b/arch/arm/boot/dts/at91-wb50n.dts
> index 89f0f717f7ed..e2195bd3e4b4 100644
> --- a/arch/arm/boot/dts/at91-wb50n.dts
> +++ b/arch/arm/boot/dts/at91-wb50n.dts
> @@ -13,7 +13,7 @@ / {
>         model = "Laird Workgroup Bridge 50N - Atmel SAMA5D";
>         compatible = "laird,wb50n", "atmel,sama5d31", "atmel,sama5d3", "atmel,sama5";
> 
> -       gpio_keys {
> +       gpio-keys {
>                 compatible = "gpio-keys";
>                 #address-cells = <1>;
>                 #size-cells = <0>;
> diff --git a/arch/arm/boot/dts/at91sam9260ek.dts b/arch/arm/boot/dts/at91sam9260ek.dts
> index 6381088ba24f..bb72f050a4fe 100644
> --- a/arch/arm/boot/dts/at91sam9260ek.dts
> +++ b/arch/arm/boot/dts/at91sam9260ek.dts
> @@ -144,17 +144,17 @@ nand0: nand@40000000 {
>                 };
>         };
> 
> -       gpio_keys {
> +       gpio-keys {
>                 compatible = "gpio-keys";
> 
> -               btn3 {
> +               button-3 {
>                         label = "Button 3";
>                         gpios = <&pioA 30 GPIO_ACTIVE_LOW>;
>                         linux,code = <0x103>;
>                         wakeup-source;
>                 };
> 
> -               btn4 {
> +               button-4 {
>                         label = "Button 4";
>                         gpios = <&pioA 31 GPIO_ACTIVE_LOW>;
>                         linux,code = <KEY_PROG1>;
> diff --git a/arch/arm/boot/dts/at91sam9261ek.dts b/arch/arm/boot/dts/at91sam9261ek.dts
> index 6fb4fe49cf1c..88869ca874d1 100644
> --- a/arch/arm/boot/dts/at91sam9261ek.dts
> +++ b/arch/arm/boot/dts/at91sam9261ek.dts
> @@ -211,31 +211,31 @@ ds1 {
>                 };
>         };
> 
> -       gpio_keys {
> +       gpio-keys {
>                 compatible = "gpio-keys";
> 
> -               button_0 {
> +               button-0 {
>                         label = "button_0";
>                         gpios = <&pioA 27 GPIO_ACTIVE_LOW>;
>                         linux,code = <256>;
>                         wakeup-source;
>                 };
> 
> -               button_1 {
> +               button-1 {
>                         label = "button_1";
>                         gpios = <&pioA 26 GPIO_ACTIVE_LOW>;
>                         linux,code = <257>;
>                         wakeup-source;
>                 };
> 
> -               button_2 {
> +               button-2 {
>                         label = "button_2";
>                         gpios = <&pioA 25 GPIO_ACTIVE_LOW>;
>                         linux,code = <258>;
>                         wakeup-source;
>                 };
> 
> -               button_3 {
> +               button-3 {
>                         label = "button_3";
>                         gpios = <&pioA 24 GPIO_ACTIVE_LOW>;
>                         linux,code = <259>;
> diff --git a/arch/arm/boot/dts/at91sam9263ek.dts b/arch/arm/boot/dts/at91sam9263ek.dts
> index e732565913a4..ce8baff6a9f4 100644
> --- a/arch/arm/boot/dts/at91sam9263ek.dts
> +++ b/arch/arm/boot/dts/at91sam9263ek.dts
> @@ -232,17 +232,17 @@ d2 {
>                 };
>         };
> 
> -       gpio_keys {
> +       gpio-keys {
>                 compatible = "gpio-keys";
> 
> -               left_click {
> +               button-left-click {
>                         label = "left_click";
>                         gpios = <&pioC 5 GPIO_ACTIVE_LOW>;
>                         linux,code = <272>;
>                         wakeup-source;
>                 };
> 
> -               right_click {
> +               button-right-click {
>                         label = "right_click";
>                         gpios = <&pioC 4 GPIO_ACTIVE_LOW>;
>                         linux,code = <273>;
> diff --git a/arch/arm/boot/dts/at91sam9g20ek_common.dtsi b/arch/arm/boot/dts/at91sam9g20ek_common.dtsi
> index 85c17dd1c8d5..60d61291f344 100644
> --- a/arch/arm/boot/dts/at91sam9g20ek_common.dtsi
> +++ b/arch/arm/boot/dts/at91sam9g20ek_common.dtsi
> @@ -234,17 +234,17 @@ wm8731: wm8731@1b {
>                 };
>         };
> 
> -       gpio_keys {
> +       gpio-keys {
>                 compatible = "gpio-keys";
> 
> -               btn3 {
> +               button-3 {
>                         label = "Button 3";
>                         gpios = <&pioA 30 GPIO_ACTIVE_LOW>;
>                         linux,code = <0x103>;
>                         wakeup-source;
>                 };
> 
> -               btn4 {
> +               button-4 {
>                         label = "Button 4";
>                         gpios = <&pioA 31 GPIO_ACTIVE_LOW>;
>                         linux,code = <KEY_PROG1>;
> diff --git a/arch/arm/boot/dts/at91sam9g25-gardena-smart-gateway.dts b/arch/arm/boot/dts/at91sam9g25-gardena-smart-gateway.dts
> index 7da70aeeb528..92f2c05c873f 100644
> --- a/arch/arm/boot/dts/at91sam9g25-gardena-smart-gateway.dts
> +++ b/arch/arm/boot/dts/at91sam9g25-gardena-smart-gateway.dts
> @@ -23,7 +23,7 @@ aliases {
>         gpio-keys {
>                 compatible = "gpio-keys";
> 
> -               user_btn1 {
> +               button {
>                         label = "USER_BTN1";
>                         gpios = <&pioA 24 GPIO_ACTIVE_LOW>;
>                         linux,code = <KEY_PROG1>;
> diff --git a/arch/arm/boot/dts/at91sam9m10g45ek.dts b/arch/arm/boot/dts/at91sam9m10g45ek.dts
> index e5db198a87a8..7f45e81ca165 100644
> --- a/arch/arm/boot/dts/at91sam9m10g45ek.dts
> +++ b/arch/arm/boot/dts/at91sam9m10g45ek.dts
> @@ -343,48 +343,48 @@ led-3 {
>                 };
>         };
> 
> -       gpio_keys {
> +       gpio-keys {
>                 compatible = "gpio-keys";
> 
> -               left_click {
> +               button-left-click {
>                         label = "left_click";
>                         gpios = <&pioB 6 GPIO_ACTIVE_LOW>;
>                         linux,code = <272>;
>                         wakeup-source;
>                 };
> 
> -               right_click {
> +               button-right-click {
>                         label = "right_click";
>                         gpios = <&pioB 7 GPIO_ACTIVE_LOW>;
>                         linux,code = <273>;
>                         wakeup-source;
>                 };
> 
> -               left {
> +               button-left {
>                         label = "Joystick Left";
>                         gpios = <&pioB 14 GPIO_ACTIVE_LOW>;
>                         linux,code = <105>;
>                 };
> 
> -               right {
> +               button-right {
>                         label = "Joystick Right";
>                         gpios = <&pioB 15 GPIO_ACTIVE_LOW>;
>                         linux,code = <106>;
>                 };
> 
> -               up {
> +               button-up {
>                         label = "Joystick Up";
>                         gpios = <&pioB 16 GPIO_ACTIVE_LOW>;
>                         linux,code = <103>;
>                 };
> 
> -               down {
> +               button-down {
>                         label = "Joystick Down";
>                         gpios = <&pioB 17 GPIO_ACTIVE_LOW>;
>                         linux,code = <108>;
>                 };
> 
> -               enter {
> +               button-enter {
>                         label = "Joystick Press";
>                         gpios = <&pioB 18 GPIO_ACTIVE_LOW>;
>                         linux,code = <28>;
> diff --git a/arch/arm/boot/dts/at91sam9n12ek.dts b/arch/arm/boot/dts/at91sam9n12ek.dts
> index c905d7bfc771..4c644d4c6be7 100644
> --- a/arch/arm/boot/dts/at91sam9n12ek.dts
> +++ b/arch/arm/boot/dts/at91sam9n12ek.dts
> @@ -226,10 +226,10 @@ d10 {
>                 };
>         };
> 
> -       gpio_keys {
> +       gpio-keys {
>                 compatible = "gpio-keys";
> 
> -               enter {
> +               button-enter {
>                         label = "Enter";
>                         gpios = <&pioB 3 GPIO_ACTIVE_LOW>;
>                         linux,code = <28>;
> diff --git a/arch/arm/boot/dts/at91sam9rlek.dts b/arch/arm/boot/dts/at91sam9rlek.dts
> index ddaadfec6751..a57351270551 100644
> --- a/arch/arm/boot/dts/at91sam9rlek.dts
> +++ b/arch/arm/boot/dts/at91sam9rlek.dts
> @@ -248,17 +248,17 @@ led-3 {
>                 };
>         };
> 
> -       gpio_keys {
> +       gpio-keys {
>                 compatible = "gpio-keys";
> 
> -               right_click {
> +               button-right-click {
>                         label = "right_click";
>                         gpios = <&pioB 0 GPIO_ACTIVE_LOW>;
>                         linux,code = <273>;
>                         wakeup-source;
>                 };
> 
> -               left_click {
> +               button-left-click {
>                         label = "left_click";
>                         gpios = <&pioB 1 GPIO_ACTIVE_LOW>;
>                         linux,code = <272>;
> --
> 2.34.1
> 


WARNING: multiple messages have this Message-ID (diff)
From: <Claudiu.Beznea@microchip.com>
To: <krzysztof.kozlowski@linaro.org>, <arm@kernel.org>,
	<soc@kernel.org>, <arnd@arndb.de>, <olof@lixom.net>,
	<robh+dt@kernel.org>, <krzysztof.kozlowski+dt@linaro.org>,
	<Nicolas.Ferre@microchip.com>, <alexandre.belloni@bootlin.com>,
	<peda@axentia.se>, <devicetree@vger.kernel.org>,
	<linux-arm-kernel@lists.infradead.org>,
	<linux-kernel@vger.kernel.org>
Subject: Re: [PATCH v3 38/40] ARM: dts: at91: align gpio-key node names with dtschema
Date: Thu, 16 Jun 2022 07:41:24 +0000	[thread overview]
Message-ID: <b439cb26-b27d-450b-8a49-d75ec92e31b5@microchip.com> (raw)
In-Reply-To: <20220616005333.18491-38-krzysztof.kozlowski@linaro.org>

On 16.06.2022 03:53, Krzysztof Kozlowski wrote:
> EXTERNAL EMAIL: Do not click links or open attachments unless you know the content is safe
> 
> The node names should be generic and DT schema expects certain pattern
> (e.g. with key/button/switch).
> 
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>


> 
> ---
> 
> Changes since v2:
> 1. at91-sam9x60ek.dts, at91-sama5d27_wlsom1_ek.dts,
>    at91-sama5d2_icp.dts: different names according to discussion.
> ---
>  arch/arm/boot/dts/at91-foxg20.dts                |  4 ++--
>  arch/arm/boot/dts/at91-gatwick.dts               |  2 +-
>  arch/arm/boot/dts/at91-kizbox.dts                |  6 +++---
>  arch/arm/boot/dts/at91-kizbox2-common.dtsi       |  8 ++++----
>  arch/arm/boot/dts/at91-kizbox3-hs.dts            | 12 ++++++------
>  arch/arm/boot/dts/at91-kizboxmini-common.dtsi    |  4 ++--
>  arch/arm/boot/dts/at91-nattis-2-natte-2.dts      |  2 +-
>  arch/arm/boot/dts/at91-qil_a9260.dts             |  2 +-
>  arch/arm/boot/dts/at91-sam9x60ek.dts             |  4 ++--
>  arch/arm/boot/dts/at91-sama5d27_som1_ek.dts      |  4 ++--
>  arch/arm/boot/dts/at91-sama5d27_wlsom1_ek.dts    |  4 ++--
>  arch/arm/boot/dts/at91-sama5d2_icp.dts           |  4 ++--
>  arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts        |  4 ++--
>  arch/arm/boot/dts/at91-sama5d2_xplained.dts      |  4 ++--
>  arch/arm/boot/dts/at91-sama5d3_xplained.dts      |  4 ++--
>  arch/arm/boot/dts/at91-sama5d4_xplained.dts      |  4 ++--
>  arch/arm/boot/dts/at91-sama5d4ek.dts             |  4 ++--
>  arch/arm/boot/dts/at91-sama7g5ek.dts             |  4 ++--
>  arch/arm/boot/dts/at91-wb45n.dts                 |  2 +-
>  arch/arm/boot/dts/at91-wb50n.dts                 |  2 +-
>  arch/arm/boot/dts/at91sam9260ek.dts              |  6 +++---
>  arch/arm/boot/dts/at91sam9261ek.dts              | 10 +++++-----
>  arch/arm/boot/dts/at91sam9263ek.dts              |  6 +++---
>  arch/arm/boot/dts/at91sam9g20ek_common.dtsi      |  6 +++---
>  .../dts/at91sam9g25-gardena-smart-gateway.dts    |  2 +-
>  arch/arm/boot/dts/at91sam9m10g45ek.dts           | 16 ++++++++--------
>  arch/arm/boot/dts/at91sam9n12ek.dts              |  4 ++--
>  arch/arm/boot/dts/at91sam9rlek.dts               |  6 +++---
>  28 files changed, 70 insertions(+), 70 deletions(-)
> 
> diff --git a/arch/arm/boot/dts/at91-foxg20.dts b/arch/arm/boot/dts/at91-foxg20.dts
> index 7edf057047f8..9dfd5de808d1 100644
> --- a/arch/arm/boot/dts/at91-foxg20.dts
> +++ b/arch/arm/boot/dts/at91-foxg20.dts
> @@ -155,10 +155,10 @@ user_led {
>                 };
>         };
> 
> -       gpio_keys {
> +       gpio-keys {
>                 compatible = "gpio-keys";
> 
> -               btn {
> +               button {
>                         label = "Button";
>                         gpios = <&pioC 4 GPIO_ACTIVE_LOW>;
>                         linux,code = <0x103>;
> diff --git a/arch/arm/boot/dts/at91-gatwick.dts b/arch/arm/boot/dts/at91-gatwick.dts
> index 5a81cab5fc3a..2c718cf84d7b 100644
> --- a/arch/arm/boot/dts/at91-gatwick.dts
> +++ b/arch/arm/boot/dts/at91-gatwick.dts
> @@ -13,7 +13,7 @@ / {
>         model = "Laird Workgroup Bridge 50N - Project Gatwick";
>         compatible = "laird,gatwick", "laird,wb50n", "atmel,sama5d31", "atmel,sama5d3", "atmel,sama5";
> 
> -       gpio_keys {
> +       gpio-keys {
>                 compatible = "gpio-keys";
>                 autorepeat;
> 
> diff --git a/arch/arm/boot/dts/at91-kizbox.dts b/arch/arm/boot/dts/at91-kizbox.dts
> index 3b8812fcd854..87e972eb2ba6 100644
> --- a/arch/arm/boot/dts/at91-kizbox.dts
> +++ b/arch/arm/boot/dts/at91-kizbox.dts
> @@ -28,19 +28,19 @@ main_xtal {
>                 };
>         };
> 
> -       gpio_keys {
> +       gpio-keys {
>                 compatible = "gpio-keys";
>                 #address-cells = <1>;
>                 #size-cells = <0>;
> 
> -               reset {
> +               button-reset {
>                         label = "PB_RST";
>                         gpios = <&pioB 30 GPIO_ACTIVE_HIGH>;
>                         linux,code = <0x100>;
>                         wakeup-source;
>                 };
> 
> -               user {
> +               button-user {
>                         label = "PB_USER";
>                         gpios = <&pioB 31 GPIO_ACTIVE_HIGH>;
>                         linux,code = <0x101>;
> diff --git a/arch/arm/boot/dts/at91-kizbox2-common.dtsi b/arch/arm/boot/dts/at91-kizbox2-common.dtsi
> index c08834ddf07b..ed7146e23147 100644
> --- a/arch/arm/boot/dts/at91-kizbox2-common.dtsi
> +++ b/arch/arm/boot/dts/at91-kizbox2-common.dtsi
> @@ -31,26 +31,26 @@ main_xtal {
>                 };
>         };
> 
> -       gpio_keys {
> +       gpio-keys {
>                 compatible = "gpio-keys";
>                 #address-cells = <1>;
>                 #size-cells = <0>;
> 
> -               prog {
> +               button-prog {
>                         label = "PB_PROG";
>                         gpios = <&pioE 27 GPIO_ACTIVE_LOW>;
>                         linux,code = <0x102>;
>                         wakeup-source;
>                 };
> 
> -               reset {
> +               button-reset {
>                         label = "PB_RST";
>                         gpios = <&pioE 29 GPIO_ACTIVE_LOW>;
>                         linux,code = <0x100>;
>                         wakeup-source;
>                 };
> 
> -               user {
> +               button-user {
>                         label = "PB_USER";
>                         gpios = <&pioE 31 GPIO_ACTIVE_HIGH>;
>                         linux,code = <0x101>;
> diff --git a/arch/arm/boot/dts/at91-kizbox3-hs.dts b/arch/arm/boot/dts/at91-kizbox3-hs.dts
> index 2799b2a1f4d2..f76e2e0b41ae 100644
> --- a/arch/arm/boot/dts/at91-kizbox3-hs.dts
> +++ b/arch/arm/boot/dts/at91-kizbox3-hs.dts
> @@ -55,7 +55,7 @@ led-6 {
>                 };
>         };
> 
> -       gpio_keys {
> +       gpio-keys {
>                 compatible = "gpio-keys";
>                 pinctrl-names = "default" , "default", "default",
>                                 "default", "default" ;
> @@ -68,35 +68,35 @@ &pinctrl_pio_io_reset
>                              &pinctrl_pio_zbe_rst>;
>                 pinctrl-4 = <&pinctrl_pio_input>;
> 
> -               SW1 {
> +               switch-1 {
>                         label = "SW1";
>                         gpios = <&pioA PIN_PA29 GPIO_ACTIVE_LOW>;
>                         linux,code = <0x101>;
>                         wakeup-source;
>                 };
> 
> -               SW2 {
> +               switch-2 {
>                         label = "SW2";
>                         gpios = <&pioA PIN_PA18 GPIO_ACTIVE_LOW>;
>                         linux,code = <0x102>;
>                         wakeup-source;
>                 };
> 
> -               SW3 {
> +               switch-3 {
>                         label = "SW3";
>                         gpios = <&pioA PIN_PA22 GPIO_ACTIVE_LOW>;
>                         linux,code = <0x103>;
>                         wakeup-source;
>                 };
> 
> -               SW7 {
> +               switch-7 {
>                         label = "SW7";
>                         gpios = <&pioA PIN_PA26 GPIO_ACTIVE_LOW>;
>                         linux,code = <0x107>;
>                         wakeup-source;
>                 };
> 
> -               SW8 {
> +               switch-8 {
>                         label = "SW8";
>                         gpios = <&pioA PIN_PA24 GPIO_ACTIVE_LOW>;
>                         linux,code = <0x108>;
> diff --git a/arch/arm/boot/dts/at91-kizboxmini-common.dtsi b/arch/arm/boot/dts/at91-kizboxmini-common.dtsi
> index 9c622892c692..8fb08e6fad7a 100644
> --- a/arch/arm/boot/dts/at91-kizboxmini-common.dtsi
> +++ b/arch/arm/boot/dts/at91-kizboxmini-common.dtsi
> @@ -39,14 +39,14 @@ gpio_keys {
>                 #address-cells = <1>;
>                 #size-cells = <0>;
> 
> -               prog {
> +               key-prog {
>                         label = "PB_PROG";
>                         gpios = <&pioC 17 GPIO_ACTIVE_LOW>;
>                         linux,code = <0x102>;
>                         wakeup-source;
>                 };
> 
> -               reset {
> +               key-reset {
>                         label = "PB_RST";
>                         gpios = <&pioC 16 GPIO_ACTIVE_LOW>;
>                         linux,code = <0x100>;
> diff --git a/arch/arm/boot/dts/at91-nattis-2-natte-2.dts b/arch/arm/boot/dts/at91-nattis-2-natte-2.dts
> index 4f123477e631..f71377c9b757 100644
> --- a/arch/arm/boot/dts/at91-nattis-2-natte-2.dts
> +++ b/arch/arm/boot/dts/at91-nattis-2-natte-2.dts
> @@ -18,7 +18,7 @@ / {
>         gpio-keys {
>                 compatible = "gpio-keys";
> 
> -               wakeup {
> +               key-wakeup {
>                         label = "Wakeup";
>                         linux,code = <10>;
>                         wakeup-source;
> diff --git a/arch/arm/boot/dts/at91-qil_a9260.dts b/arch/arm/boot/dts/at91-qil_a9260.dts
> index 969d990767fc..d09b3d15a828 100644
> --- a/arch/arm/boot/dts/at91-qil_a9260.dts
> +++ b/arch/arm/boot/dts/at91-qil_a9260.dts
> @@ -201,7 +201,7 @@ gpio_keys {
>                 #address-cells = <1>;
>                 #size-cells = <0>;
> 
> -               user_pb {
> +               button-user {
>                         label = "user_pb";
>                         gpios = <&pioB 10 GPIO_ACTIVE_LOW>;
>                         linux,code = <28>;
> diff --git a/arch/arm/boot/dts/at91-sam9x60ek.dts b/arch/arm/boot/dts/at91-sam9x60ek.dts
> index 7719ea3d4933..838353a42097 100644
> --- a/arch/arm/boot/dts/at91-sam9x60ek.dts
> +++ b/arch/arm/boot/dts/at91-sam9x60ek.dts
> @@ -76,13 +76,13 @@ vdd2_3v3: regulator-fixed-vdd2_3v3@3 {
>                 };
>         };
> 
> -       gpio_keys {
> +       gpio-keys {
>                 compatible = "gpio-keys";
>                 pinctrl-names = "default";
>                 pinctrl-0 = <&pinctrl_key_gpio_default>;
>                 status = "okay";
> 
> -               sw1 {
> +               button-1 {
>                         label = "SW1";
>                         gpios = <&pioD 18 GPIO_ACTIVE_LOW>;
>                         linux,code=<KEY_PROG1>;
> diff --git a/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts b/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts
> index 08f0d4b995ff..96c9290007a8 100644
> --- a/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts
> +++ b/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts
> @@ -478,13 +478,13 @@ can1: can@fc050000 {
>                 };
>         };
> 
> -       gpio_keys {
> +       gpio-keys {
>                 compatible = "gpio-keys";
> 
>                 pinctrl-names = "default";
>                 pinctrl-0 = <&pinctrl_key_gpio_default>;
> 
> -               pb4 {
> +               button {
>                         label = "USER";
>                         gpios = <&pioA PIN_PA29 GPIO_ACTIVE_LOW>;
>                         linux,code = <KEY_PROG1>;
> diff --git a/arch/arm/boot/dts/at91-sama5d27_wlsom1_ek.dts b/arch/arm/boot/dts/at91-sama5d27_wlsom1_ek.dts
> index 5e8755f22784..b55e8fb113b1 100644
> --- a/arch/arm/boot/dts/at91-sama5d27_wlsom1_ek.dts
> +++ b/arch/arm/boot/dts/at91-sama5d27_wlsom1_ek.dts
> @@ -26,14 +26,14 @@ chosen {
>                 stdout-path = "serial0:115200n8";
>         };
> 
> -       gpio_keys {
> +       gpio-keys {
>                 compatible = "gpio-keys";
> 
>                 pinctrl-names = "default";
>                 pinctrl-0 = <&pinctrl_key_gpio_default>;
>                 status = "okay";
> 
> -               sw4 {
> +               button-1 {
>                         label = "USER BUTTON";
>                         gpios = <&pioA PIN_PB2 GPIO_ACTIVE_LOW>;
>                         linux,code = <KEY_PROG1>;
> diff --git a/arch/arm/boot/dts/at91-sama5d2_icp.dts b/arch/arm/boot/dts/at91-sama5d2_icp.dts
> index 806eb1d911d7..38f0e1ae6ae6 100644
> --- a/arch/arm/boot/dts/at91-sama5d2_icp.dts
> +++ b/arch/arm/boot/dts/at91-sama5d2_icp.dts
> @@ -42,14 +42,14 @@ main_xtal {
>                 };
>         };
> 
> -       gpio_keys {
> +       gpio-keys {
>                 compatible = "gpio-keys";
> 
>                 pinctrl-names = "default";
>                 pinctrl-0 = <&pinctrl_key_gpio_default>;
>                 status = "okay";
> 
> -               sw4 {
> +               button-1 {
>                         label = "USER_PB1";
>                         gpios = <&pioA PIN_PD0 GPIO_ACTIVE_LOW>;
>                         linux,code = <KEY_PROG1>;
> diff --git a/arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts b/arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts
> index 8ed58af01391..544c64549459 100644
> --- a/arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts
> +++ b/arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts
> @@ -394,13 +394,13 @@ pinctrl_usba_vbus: usba_vbus {
>                 };
>         };
> 
> -       gpio_keys {
> +       gpio-keys {
>                 compatible = "gpio-keys";
> 
>                 pinctrl-names = "default";
>                 pinctrl-0 = <&pinctrl_key_gpio_default>;
> 
> -               bp1 {
> +               button-1 {
>                         label = "PB_USER";
>                         gpios = <&pioA PIN_PA10 GPIO_ACTIVE_LOW>;
>                         linux,code = <KEY_PROG1>;
> diff --git a/arch/arm/boot/dts/at91-sama5d2_xplained.dts b/arch/arm/boot/dts/at91-sama5d2_xplained.dts
> index cdfe891f9a9e..6799c2f475b2 100644
> --- a/arch/arm/boot/dts/at91-sama5d2_xplained.dts
> +++ b/arch/arm/boot/dts/at91-sama5d2_xplained.dts
> @@ -703,13 +703,13 @@ can1: can@fc050000 {
>                 };
>         };
> 
> -       gpio_keys {
> +       gpio-keys {
>                 compatible = "gpio-keys";
> 
>                 pinctrl-names = "default";
>                 pinctrl-0 = <&pinctrl_key_gpio_default>;
> 
> -               bp1 {
> +               button {
>                         label = "PB_USER";
>                         gpios = <&pioA PIN_PB9 GPIO_ACTIVE_LOW>;
>                         linux,code = <KEY_PROG1>;
> diff --git a/arch/arm/boot/dts/at91-sama5d3_xplained.dts b/arch/arm/boot/dts/at91-sama5d3_xplained.dts
> index a49c2966b41e..1f42a6a981bf 100644
> --- a/arch/arm/boot/dts/at91-sama5d3_xplained.dts
> +++ b/arch/arm/boot/dts/at91-sama5d3_xplained.dts
> @@ -372,13 +372,13 @@ vcc_mmc0_reg: fixedregulator_mmc0 {
>                 regulator-always-on;
>         };
> 
> -       gpio_keys {
> +       gpio-keys {
>                 compatible = "gpio-keys";
> 
>                 pinctrl-names = "default";
>                 pinctrl-0 = <&pinctrl_key_gpio>;
> 
> -               bp3 {
> +               button {
>                         label = "PB_USER";
>                         gpios = <&pioE 29 GPIO_ACTIVE_LOW>;
>                         linux,code = <KEY_PROG1>;
> diff --git a/arch/arm/boot/dts/at91-sama5d4_xplained.dts b/arch/arm/boot/dts/at91-sama5d4_xplained.dts
> index e519d2747936..f122f302f8e0 100644
> --- a/arch/arm/boot/dts/at91-sama5d4_xplained.dts
> +++ b/arch/arm/boot/dts/at91-sama5d4_xplained.dts
> @@ -242,13 +242,13 @@ rootfs@800000 {
>                 };
>         };
> 
> -       gpio_keys {
> +       gpio-keys {
>                 compatible = "gpio-keys";
> 
>                 pinctrl-names = "default";
>                 pinctrl-0 = <&pinctrl_key_gpio>;
> 
> -               pb_user1 {
> +               button {
>                         label = "pb_user1";
>                         gpios = <&pioE 8 GPIO_ACTIVE_HIGH>;
>                         linux,code = <KEY_PROG1>;
> diff --git a/arch/arm/boot/dts/at91-sama5d4ek.dts b/arch/arm/boot/dts/at91-sama5d4ek.dts
> index 7017f626f362..fce4e93c6bee 100644
> --- a/arch/arm/boot/dts/at91-sama5d4ek.dts
> +++ b/arch/arm/boot/dts/at91-sama5d4ek.dts
> @@ -269,13 +269,13 @@ rootfs@800000 {
>                 };
>         };
> 
> -       gpio_keys {
> +       gpio-keys {
>                 compatible = "gpio-keys";
> 
>                 pinctrl-names = "default";
>                 pinctrl-0 = <&pinctrl_key_gpio>;
> 
> -               pb_user1 {
> +               button {
>                         label = "pb_user1";
>                         gpios = <&pioE 13 GPIO_ACTIVE_HIGH>;
>                         linux,code = <0x100>;
> diff --git a/arch/arm/boot/dts/at91-sama7g5ek.dts b/arch/arm/boot/dts/at91-sama7g5ek.dts
> index 103544620fd7..de44da2e4aae 100644
> --- a/arch/arm/boot/dts/at91-sama7g5ek.dts
> +++ b/arch/arm/boot/dts/at91-sama7g5ek.dts
> @@ -45,13 +45,13 @@ main_xtal {
>                 };
>         };
> 
> -       gpio_keys {
> +       gpio-keys {
>                 compatible = "gpio-keys";
> 
>                 pinctrl-names = "default";
>                 pinctrl-0 = <&pinctrl_key_gpio_default>;
> 
> -               bp1 {
> +               button {
>                         label = "PB_USER";
>                         gpios = <&pioA PIN_PA12 GPIO_ACTIVE_LOW>;
>                         linux,code = <KEY_PROG1>;
> diff --git a/arch/arm/boot/dts/at91-wb45n.dts b/arch/arm/boot/dts/at91-wb45n.dts
> index 54d130c92185..3e46b29412d1 100644
> --- a/arch/arm/boot/dts/at91-wb45n.dts
> +++ b/arch/arm/boot/dts/at91-wb45n.dts
> @@ -12,7 +12,7 @@ / {
>         model = "Laird Workgroup Bridge 45N - Atmel AT91SAM (dt)";
>         compatible = "laird,wb45n", "laird,wbxx", "atmel,at91sam9x5", "atmel,at91sam9";
> 
> -       gpio_keys {
> +       gpio-keys {
>                 compatible = "gpio-keys";
>                 #address-cells = <1>;
>                 #size-cells = <0>;
> diff --git a/arch/arm/boot/dts/at91-wb50n.dts b/arch/arm/boot/dts/at91-wb50n.dts
> index 89f0f717f7ed..e2195bd3e4b4 100644
> --- a/arch/arm/boot/dts/at91-wb50n.dts
> +++ b/arch/arm/boot/dts/at91-wb50n.dts
> @@ -13,7 +13,7 @@ / {
>         model = "Laird Workgroup Bridge 50N - Atmel SAMA5D";
>         compatible = "laird,wb50n", "atmel,sama5d31", "atmel,sama5d3", "atmel,sama5";
> 
> -       gpio_keys {
> +       gpio-keys {
>                 compatible = "gpio-keys";
>                 #address-cells = <1>;
>                 #size-cells = <0>;
> diff --git a/arch/arm/boot/dts/at91sam9260ek.dts b/arch/arm/boot/dts/at91sam9260ek.dts
> index 6381088ba24f..bb72f050a4fe 100644
> --- a/arch/arm/boot/dts/at91sam9260ek.dts
> +++ b/arch/arm/boot/dts/at91sam9260ek.dts
> @@ -144,17 +144,17 @@ nand0: nand@40000000 {
>                 };
>         };
> 
> -       gpio_keys {
> +       gpio-keys {
>                 compatible = "gpio-keys";
> 
> -               btn3 {
> +               button-3 {
>                         label = "Button 3";
>                         gpios = <&pioA 30 GPIO_ACTIVE_LOW>;
>                         linux,code = <0x103>;
>                         wakeup-source;
>                 };
> 
> -               btn4 {
> +               button-4 {
>                         label = "Button 4";
>                         gpios = <&pioA 31 GPIO_ACTIVE_LOW>;
>                         linux,code = <KEY_PROG1>;
> diff --git a/arch/arm/boot/dts/at91sam9261ek.dts b/arch/arm/boot/dts/at91sam9261ek.dts
> index 6fb4fe49cf1c..88869ca874d1 100644
> --- a/arch/arm/boot/dts/at91sam9261ek.dts
> +++ b/arch/arm/boot/dts/at91sam9261ek.dts
> @@ -211,31 +211,31 @@ ds1 {
>                 };
>         };
> 
> -       gpio_keys {
> +       gpio-keys {
>                 compatible = "gpio-keys";
> 
> -               button_0 {
> +               button-0 {
>                         label = "button_0";
>                         gpios = <&pioA 27 GPIO_ACTIVE_LOW>;
>                         linux,code = <256>;
>                         wakeup-source;
>                 };
> 
> -               button_1 {
> +               button-1 {
>                         label = "button_1";
>                         gpios = <&pioA 26 GPIO_ACTIVE_LOW>;
>                         linux,code = <257>;
>                         wakeup-source;
>                 };
> 
> -               button_2 {
> +               button-2 {
>                         label = "button_2";
>                         gpios = <&pioA 25 GPIO_ACTIVE_LOW>;
>                         linux,code = <258>;
>                         wakeup-source;
>                 };
> 
> -               button_3 {
> +               button-3 {
>                         label = "button_3";
>                         gpios = <&pioA 24 GPIO_ACTIVE_LOW>;
>                         linux,code = <259>;
> diff --git a/arch/arm/boot/dts/at91sam9263ek.dts b/arch/arm/boot/dts/at91sam9263ek.dts
> index e732565913a4..ce8baff6a9f4 100644
> --- a/arch/arm/boot/dts/at91sam9263ek.dts
> +++ b/arch/arm/boot/dts/at91sam9263ek.dts
> @@ -232,17 +232,17 @@ d2 {
>                 };
>         };
> 
> -       gpio_keys {
> +       gpio-keys {
>                 compatible = "gpio-keys";
> 
> -               left_click {
> +               button-left-click {
>                         label = "left_click";
>                         gpios = <&pioC 5 GPIO_ACTIVE_LOW>;
>                         linux,code = <272>;
>                         wakeup-source;
>                 };
> 
> -               right_click {
> +               button-right-click {
>                         label = "right_click";
>                         gpios = <&pioC 4 GPIO_ACTIVE_LOW>;
>                         linux,code = <273>;
> diff --git a/arch/arm/boot/dts/at91sam9g20ek_common.dtsi b/arch/arm/boot/dts/at91sam9g20ek_common.dtsi
> index 85c17dd1c8d5..60d61291f344 100644
> --- a/arch/arm/boot/dts/at91sam9g20ek_common.dtsi
> +++ b/arch/arm/boot/dts/at91sam9g20ek_common.dtsi
> @@ -234,17 +234,17 @@ wm8731: wm8731@1b {
>                 };
>         };
> 
> -       gpio_keys {
> +       gpio-keys {
>                 compatible = "gpio-keys";
> 
> -               btn3 {
> +               button-3 {
>                         label = "Button 3";
>                         gpios = <&pioA 30 GPIO_ACTIVE_LOW>;
>                         linux,code = <0x103>;
>                         wakeup-source;
>                 };
> 
> -               btn4 {
> +               button-4 {
>                         label = "Button 4";
>                         gpios = <&pioA 31 GPIO_ACTIVE_LOW>;
>                         linux,code = <KEY_PROG1>;
> diff --git a/arch/arm/boot/dts/at91sam9g25-gardena-smart-gateway.dts b/arch/arm/boot/dts/at91sam9g25-gardena-smart-gateway.dts
> index 7da70aeeb528..92f2c05c873f 100644
> --- a/arch/arm/boot/dts/at91sam9g25-gardena-smart-gateway.dts
> +++ b/arch/arm/boot/dts/at91sam9g25-gardena-smart-gateway.dts
> @@ -23,7 +23,7 @@ aliases {
>         gpio-keys {
>                 compatible = "gpio-keys";
> 
> -               user_btn1 {
> +               button {
>                         label = "USER_BTN1";
>                         gpios = <&pioA 24 GPIO_ACTIVE_LOW>;
>                         linux,code = <KEY_PROG1>;
> diff --git a/arch/arm/boot/dts/at91sam9m10g45ek.dts b/arch/arm/boot/dts/at91sam9m10g45ek.dts
> index e5db198a87a8..7f45e81ca165 100644
> --- a/arch/arm/boot/dts/at91sam9m10g45ek.dts
> +++ b/arch/arm/boot/dts/at91sam9m10g45ek.dts
> @@ -343,48 +343,48 @@ led-3 {
>                 };
>         };
> 
> -       gpio_keys {
> +       gpio-keys {
>                 compatible = "gpio-keys";
> 
> -               left_click {
> +               button-left-click {
>                         label = "left_click";
>                         gpios = <&pioB 6 GPIO_ACTIVE_LOW>;
>                         linux,code = <272>;
>                         wakeup-source;
>                 };
> 
> -               right_click {
> +               button-right-click {
>                         label = "right_click";
>                         gpios = <&pioB 7 GPIO_ACTIVE_LOW>;
>                         linux,code = <273>;
>                         wakeup-source;
>                 };
> 
> -               left {
> +               button-left {
>                         label = "Joystick Left";
>                         gpios = <&pioB 14 GPIO_ACTIVE_LOW>;
>                         linux,code = <105>;
>                 };
> 
> -               right {
> +               button-right {
>                         label = "Joystick Right";
>                         gpios = <&pioB 15 GPIO_ACTIVE_LOW>;
>                         linux,code = <106>;
>                 };
> 
> -               up {
> +               button-up {
>                         label = "Joystick Up";
>                         gpios = <&pioB 16 GPIO_ACTIVE_LOW>;
>                         linux,code = <103>;
>                 };
> 
> -               down {
> +               button-down {
>                         label = "Joystick Down";
>                         gpios = <&pioB 17 GPIO_ACTIVE_LOW>;
>                         linux,code = <108>;
>                 };
> 
> -               enter {
> +               button-enter {
>                         label = "Joystick Press";
>                         gpios = <&pioB 18 GPIO_ACTIVE_LOW>;
>                         linux,code = <28>;
> diff --git a/arch/arm/boot/dts/at91sam9n12ek.dts b/arch/arm/boot/dts/at91sam9n12ek.dts
> index c905d7bfc771..4c644d4c6be7 100644
> --- a/arch/arm/boot/dts/at91sam9n12ek.dts
> +++ b/arch/arm/boot/dts/at91sam9n12ek.dts
> @@ -226,10 +226,10 @@ d10 {
>                 };
>         };
> 
> -       gpio_keys {
> +       gpio-keys {
>                 compatible = "gpio-keys";
> 
> -               enter {
> +               button-enter {
>                         label = "Enter";
>                         gpios = <&pioB 3 GPIO_ACTIVE_LOW>;
>                         linux,code = <28>;
> diff --git a/arch/arm/boot/dts/at91sam9rlek.dts b/arch/arm/boot/dts/at91sam9rlek.dts
> index ddaadfec6751..a57351270551 100644
> --- a/arch/arm/boot/dts/at91sam9rlek.dts
> +++ b/arch/arm/boot/dts/at91sam9rlek.dts
> @@ -248,17 +248,17 @@ led-3 {
>                 };
>         };
> 
> -       gpio_keys {
> +       gpio-keys {
>                 compatible = "gpio-keys";
> 
> -               right_click {
> +               button-right-click {
>                         label = "right_click";
>                         gpios = <&pioB 0 GPIO_ACTIVE_LOW>;
>                         linux,code = <273>;
>                         wakeup-source;
>                 };
> 
> -               left_click {
> +               button-left-click {
>                         label = "left_click";
>                         gpios = <&pioB 1 GPIO_ACTIVE_LOW>;
>                         linux,code = <272>;
> --
> 2.34.1
> 

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  reply	other threads:[~2022-06-16  7:41 UTC|newest]

Thread overview: 163+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-06-16  0:52 [PATCH v3 00/40] dt-bindings: input: gpio-keys: rework matching children Krzysztof Kozlowski
2022-06-16  0:52 ` Krzysztof Kozlowski
2022-06-16  0:52 ` Krzysztof Kozlowski
2022-06-16  0:52 ` [PATCH v3 01/40] dt-bindings: input: gpio-keys: enforce node names to match all properties Krzysztof Kozlowski
2022-06-27  8:17   ` Krzysztof Kozlowski
2022-07-05 11:39     ` Krzysztof Kozlowski
2022-06-16  0:52 ` [PATCH v3 02/40] dt-bindings: input: gpio-keys: reference input.yaml and document properties Krzysztof Kozlowski
2022-06-16  0:52 ` [PATCH v3 03/40] dt-bindings: input: gpio-keys: accept also interrupt-extended Krzysztof Kozlowski
2022-06-16  0:52 ` [PATCH v3 04/40] dt-bindings: pinctrl: nuvoton,wpcm450-pinctrl: align key node name Krzysztof Kozlowski
2022-06-25 23:28   ` Linus Walleij
2022-06-25 23:28     ` Linus Walleij
2022-06-26 10:28     ` Krzysztof Kozlowski
2022-06-26 10:28       ` Krzysztof Kozlowski
2022-06-27 22:18   ` Rob Herring
2022-06-27 22:18     ` Rob Herring
2022-06-28 19:26   ` Linus Walleij
2022-06-28 19:26     ` Linus Walleij
2022-06-16  0:52 ` [PATCH v3 05/40] arm64: dts: apm: correct gpio-keys properties Krzysztof Kozlowski
2022-06-20 11:14   ` (subset) " Krzysztof Kozlowski
2022-06-16  0:52 ` [PATCH v3 06/40] arm64: dts: broadcom: align gpio-key node names with dtschema Krzysztof Kozlowski
2022-06-20 11:14   ` (subset) " Krzysztof Kozlowski
2022-06-16  0:53 ` [PATCH v3 07/40] arm64: dts: freescale: " Krzysztof Kozlowski
2022-06-16  0:53   ` Krzysztof Kozlowski
2022-06-16  0:53 ` [PATCH v3 08/40] arm64: dts: freescale: align led " Krzysztof Kozlowski
2022-06-16  0:53   ` Krzysztof Kozlowski
2022-06-16  0:53 ` [PATCH v3 09/40] arm64: dts: hisilicon: align gpio-key " Krzysztof Kozlowski
2022-06-16  0:53   ` Krzysztof Kozlowski
2022-06-20 11:14   ` (subset) " Krzysztof Kozlowski
2022-06-20 11:14     ` Krzysztof Kozlowski
2022-06-21  2:29     ` Wei Xu
2022-06-21  2:29       ` Wei Xu
2022-06-16  0:53 ` [PATCH v3 10/40] arm64: dts: hisilicon: correct gpio-keys properties Krzysztof Kozlowski
2022-06-16  0:53   ` Krzysztof Kozlowski
2022-06-20 11:14   ` (subset) " Krzysztof Kozlowski
2022-06-20 11:14     ` Krzysztof Kozlowski
2022-06-21  2:28     ` Wei Xu
2022-06-21  2:28       ` Wei Xu
2022-06-16  0:53 ` [PATCH v3 11/40] arm64: dts: marvell: align gpio-key node names with dtschema Krzysztof Kozlowski
2022-06-16  0:53   ` Krzysztof Kozlowski
2022-06-22  8:32   ` Krzysztof Kozlowski
2022-06-22  8:32     ` Krzysztof Kozlowski
2022-06-27  8:42     ` Krzysztof Kozlowski
2022-06-27  8:42       ` Krzysztof Kozlowski
2022-06-27  9:15   ` (subset) " Krzysztof Kozlowski
2022-06-27  9:15     ` Krzysztof Kozlowski
2022-06-16  0:53 ` [PATCH v3 12/40] arm64: dts: marvell: armada-3720: align lednode " Krzysztof Kozlowski
2022-06-16  0:53   ` Krzysztof Kozlowski
2022-06-27  9:15   ` (subset) " Krzysztof Kozlowski
2022-06-27  9:15     ` Krzysztof Kozlowski
2022-06-16  0:53 ` [PATCH v3 13/40] ARM: dts: marvell: align gpio-key node " Krzysztof Kozlowski
2022-06-16  0:53   ` Krzysztof Kozlowski
2022-06-27  9:15   ` (subset) " Krzysztof Kozlowski
2022-06-27  9:15     ` Krzysztof Kozlowski
2022-06-16  0:53 ` [PATCH v3 14/40] ARM: dts: marvell: correct gpio-keys properties Krzysztof Kozlowski
2022-06-16  0:53   ` Krzysztof Kozlowski
2022-06-27  9:15   ` (subset) " Krzysztof Kozlowski
2022-06-27  9:15     ` Krzysztof Kozlowski
2022-06-16  0:53 ` [PATCH v3 15/40] arm64: dts: mediatek: align gpio-key node names with dtschema Krzysztof Kozlowski
2022-06-16  0:53   ` Krzysztof Kozlowski
2022-06-17 10:43   ` Matthias Brugger
2022-06-17 10:43     ` Matthias Brugger
2022-06-16  0:53 ` [PATCH v3 16/40] arm64: dts: mediatek: mt7622-bananapi-bpi-r64: align led " Krzysztof Kozlowski
2022-06-16  0:53   ` Krzysztof Kozlowski
2022-06-17 10:43   ` Matthias Brugger
2022-06-17 10:43     ` Matthias Brugger
2022-06-16  0:53 ` [PATCH v3 17/40] arm64: dts: mediatek: mt7622-rfb1: correct gpio-keys properties Krzysztof Kozlowski
2022-06-16  0:53   ` Krzysztof Kozlowski
2022-06-17 10:41   ` Matthias Brugger
2022-06-17 10:41     ` Matthias Brugger
2022-06-17 23:18     ` Krzysztof Kozlowski
2022-06-17 23:18       ` Krzysztof Kozlowski
2022-06-16  0:53 ` [PATCH v3 18/40] ARM: dts: mediatek: align gpio-key node names with dtschema Krzysztof Kozlowski
2022-06-16  0:53   ` Krzysztof Kozlowski
2022-06-17 10:44   ` Matthias Brugger
2022-06-17 10:44     ` Matthias Brugger
2022-06-16  0:53 ` [PATCH v3 19/40] arm64: dts: tegra: " Krzysztof Kozlowski
2022-06-24 16:08   ` Thierry Reding
2022-06-24 16:09     ` Krzysztof Kozlowski
2022-06-27  8:45       ` Krzysztof Kozlowski
2022-06-16  0:53 ` [PATCH v3 20/40] ARM: " Krzysztof Kozlowski
2022-06-16  0:53 ` [PATCH v3 21/40] arm64: dts: qcom: " Krzysztof Kozlowski
2022-06-22  8:33   ` Krzysztof Kozlowski
2022-06-27  9:15   ` (subset) " Krzysztof Kozlowski
2022-07-03  3:56   ` Bjorn Andersson
2022-06-16  0:53 ` [PATCH v3 22/40] arm64: dts: qcom: correct gpio-keys properties Krzysztof Kozlowski
2022-06-27  9:15   ` (subset) " Krzysztof Kozlowski
2022-07-03  3:56   ` Bjorn Andersson
2022-06-16  0:53 ` [PATCH v3 23/40] arm64: dts: qcom: sdm630-sony-xperia-nile: drop unneeded status from gpio-keys Krzysztof Kozlowski
2022-06-27  9:15   ` (subset) " Krzysztof Kozlowski
2022-07-03  3:56   ` Bjorn Andersson
2022-06-16  0:53 ` [PATCH v3 24/40] arm64: dts: qcom: align led node names with dtschema Krzysztof Kozlowski
2022-06-27  9:15   ` (subset) " Krzysztof Kozlowski
2022-07-03  3:56   ` Bjorn Andersson
2022-06-16  0:53 ` [PATCH v3 25/40] ARM: dts: qcom: align gpio-key " Krzysztof Kozlowski
2022-06-27  9:15   ` (subset) " Krzysztof Kozlowski
2022-06-16  0:53 ` [PATCH v3 26/40] arm64: dts: rockchip: " Krzysztof Kozlowski
2022-06-16  0:53   ` Krzysztof Kozlowski
2022-06-16  0:53   ` Krzysztof Kozlowski
2022-06-22  8:34   ` Krzysztof Kozlowski
2022-06-22  8:34     ` Krzysztof Kozlowski
2022-06-22  8:34     ` Krzysztof Kozlowski
2022-06-22 12:52     ` Heiko Stuebner
2022-06-22 12:52       ` Heiko Stuebner
2022-06-22 12:52       ` Heiko Stuebner
2022-06-16  0:53 ` [PATCH v3 27/40] ARM: " Krzysztof Kozlowski
2022-06-16  0:53   ` Krzysztof Kozlowski
2022-06-16  0:53   ` Krzysztof Kozlowski
2022-06-16  0:53 ` [PATCH v3 28/40] ARM: dts: rockchip: rk3288-tinker: correct gpio-keys properties Krzysztof Kozlowski
2022-06-16  0:53   ` Krzysztof Kozlowski
2022-06-16  0:53   ` Krzysztof Kozlowski
2022-06-16  0:53 ` [PATCH v3 29/40] arm64: dts: ti: align gpio-key node names with dtschema Krzysztof Kozlowski
2022-06-16  0:53   ` Krzysztof Kozlowski
2022-06-16  0:53 ` [PATCH v3 30/40] arm64: dts: xilinx: " Krzysztof Kozlowski
2022-06-16  0:53   ` Krzysztof Kozlowski
2022-06-23  8:10   ` Michal Simek
2022-06-23  8:10     ` Michal Simek
2022-06-16  0:53 ` [PATCH v3 31/40] ARM: " Krzysztof Kozlowski
2022-06-16  0:53   ` Krzysztof Kozlowski
2022-06-23  8:10   ` Michal Simek
2022-06-23  8:10     ` Michal Simek
2022-06-16  0:53 ` [PATCH v3 32/40] ARM: dts: omap: " Krzysztof Kozlowski
2022-06-27  9:15   ` (subset) " Krzysztof Kozlowski
2022-06-16  0:53 ` [PATCH v3 33/40] ARM: dts: omap: correct gpio-keys properties Krzysztof Kozlowski
2022-06-27  9:15   ` (subset) " Krzysztof Kozlowski
2022-06-16  0:53 ` [PATCH v3 34/40] ARM: dts: animeo: align gpio-key node names with dtschema Krzysztof Kozlowski
2022-06-20 11:14   ` (subset) " Krzysztof Kozlowski
2022-06-16  0:53 ` [PATCH v3 35/40] ARM: dts: animeo: correct gpio-keys properties Krzysztof Kozlowski
2022-06-20 11:14   ` (subset) " Krzysztof Kozlowski
2022-06-16  0:53 ` [PATCH v3 36/40] ARM: dts: aspeed: align gpio-key node names with dtschema Krzysztof Kozlowski
2022-06-16  0:53   ` Krzysztof Kozlowski
2022-06-27  8:49   ` Krzysztof Kozlowski
2022-06-27  8:49     ` Krzysztof Kozlowski
2022-07-05 11:42     ` Krzysztof Kozlowski
2022-07-05 11:42       ` Krzysztof Kozlowski
2022-07-05 11:45   ` (subset) " Krzysztof Kozlowski
2022-07-05 11:45     ` Krzysztof Kozlowski
2022-06-16  0:53 ` [PATCH v3 37/40] ARM: dts: aspeed: correct gpio-keys properties Krzysztof Kozlowski
2022-06-16  0:53   ` Krzysztof Kozlowski
2022-07-05 11:45   ` (subset) " Krzysztof Kozlowski
2022-07-05 11:45     ` Krzysztof Kozlowski
2022-06-16  0:53 ` [PATCH v3 38/40] ARM: dts: at91: align gpio-key node names with dtschema Krzysztof Kozlowski
2022-06-16  0:53   ` Krzysztof Kozlowski
2022-06-16  7:41   ` Claudiu.Beznea [this message]
2022-06-16  7:41     ` Claudiu.Beznea
2022-06-27  9:15   ` (subset) " Krzysztof Kozlowski
2022-06-27  9:15     ` Krzysztof Kozlowski
2022-06-16  0:53 ` [PATCH v3 39/40] ARM: dts: at91: correct gpio-keys properties Krzysztof Kozlowski
2022-06-16  0:53   ` Krzysztof Kozlowski
2022-06-27  9:15   ` (subset) " Krzysztof Kozlowski
2022-06-27  9:15     ` Krzysztof Kozlowski
2022-06-16  0:53 ` [PATCH v3 40/40] ARM: dts: at91: drop unneeded status from gpio-keys Krzysztof Kozlowski
2022-06-16  0:53   ` Krzysztof Kozlowski
2022-06-27  9:16   ` (subset) " Krzysztof Kozlowski
2022-06-27  9:16     ` Krzysztof Kozlowski
2022-06-18  3:02 ` (subset) [PATCH v3 00/40] dt-bindings: input: gpio-keys: rework matching children Nishanth Menon
2022-06-18  3:02   ` Nishanth Menon
2022-06-18  3:02   ` Nishanth Menon
2022-06-22 19:47 ` Heiko Stuebner
2022-06-22 19:47   ` Heiko Stuebner
2022-06-22 19:47   ` Heiko Stuebner
2022-07-01 20:41 ` patchwork-bot+linux-soc
2022-07-03  3:56 ` (subset) " Bjorn Andersson
2022-07-03  3:56   ` Bjorn Andersson

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=b439cb26-b27d-450b-8a49-d75ec92e31b5@microchip.com \
    --to=claudiu.beznea@microchip.com \
    --cc=Nicolas.Ferre@microchip.com \
    --cc=alexandre.belloni@bootlin.com \
    --cc=arm@kernel.org \
    --cc=arnd@arndb.de \
    --cc=devicetree@vger.kernel.org \
    --cc=krzysztof.kozlowski+dt@linaro.org \
    --cc=krzysztof.kozlowski@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=olof@lixom.net \
    --cc=peda@axentia.se \
    --cc=robh+dt@kernel.org \
    --cc=soc@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.