From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1754503AbbDGMzT (ORCPT ); Tue, 7 Apr 2015 08:55:19 -0400 Received: from ip4-83-240-67-251.cust.nbox.cz ([83.240.67.251]:54487 "EHLO ip4-83-240-18-248.cust.nbox.cz" rhost-flags-OK-OK-OK-FAIL) by vger.kernel.org with ESMTP id S1753647AbbDGMwa (ORCPT ); Tue, 7 Apr 2015 08:52:30 -0400 From: Jiri Slaby To: stable@vger.kernel.org Cc: linux-kernel@vger.kernel.org, Vineet Gupta , Jiri Slaby Subject: [PATCH 3.12 105/155] ARC: [nsimosci] move peripherals to match model to FPGA Date: Tue, 7 Apr 2015 14:51:14 +0200 Message-Id: X-Mailer: git-send-email 2.3.4 In-Reply-To: <9a548862b8a26cbccc14f2c6c9c3688813d8d14b.1428411003.git.jslaby@suse.cz> References: <9a548862b8a26cbccc14f2c6c9c3688813d8d14b.1428411003.git.jslaby@suse.cz> In-Reply-To: References: Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org From: Vineet Gupta 3.12-stable review patch. If anyone has any objections, please let me know. =============== commit e8ef060b37c2d3cc5fd0c0edbe4e42ec1cb9768b upstream. This allows the sdplite/Zebu images to run on OSCI simulation platform Signed-off-by: Vineet Gupta Cc: #3.10, 3.12, 3.14, 3.16 Signed-off-by: Jiri Slaby --- arch/arc/boot/dts/nsimosci.dts | 18 +++++++++--------- 1 file changed, 9 insertions(+), 9 deletions(-) diff --git a/arch/arc/boot/dts/nsimosci.dts b/arch/arc/boot/dts/nsimosci.dts index 398064cef746..4c169d825415 100644 --- a/arch/arc/boot/dts/nsimosci.dts +++ b/arch/arc/boot/dts/nsimosci.dts @@ -20,7 +20,7 @@ /* this is for console on PGU */ /* bootargs = "console=tty0 consoleblank=0"; */ /* this is for console on serial */ - bootargs = "earlycon=uart8250,mmio32,0xc0000000,115200n8 console=tty0 console=ttyS0,115200n8 consoleblank=0 debug"; + bootargs = "earlycon=uart8250,mmio32,0xf0000000,115200n8 console=tty0 console=ttyS0,115200n8 consoleblank=0 debug"; }; aliases { @@ -46,9 +46,9 @@ #interrupt-cells = <1>; }; - uart0: serial@c0000000 { + uart0: serial@f0000000 { compatible = "ns8250"; - reg = <0xc0000000 0x2000>; + reg = <0xf0000000 0x2000>; interrupts = <11>; clock-frequency = <3686400>; baud = <115200>; @@ -57,21 +57,21 @@ no-loopback-test = <1>; }; - pgu0: pgu@c9000000 { + pgu0: pgu@f9000000 { compatible = "snps,arcpgufb"; - reg = <0xc9000000 0x400>; + reg = <0xf9000000 0x400>; }; - ps2: ps2@c9001000 { + ps2: ps2@f9001000 { compatible = "snps,arc_ps2"; - reg = <0xc9000400 0x14>; + reg = <0xf9000400 0x14>; interrupts = <13>; interrupt-names = "arc_ps2_irq"; }; - eth0: ethernet@c0003000 { + eth0: ethernet@f0003000 { compatible = "snps,oscilan"; - reg = <0xc0003000 0x44>; + reg = <0xf0003000 0x44>; interrupts = <7>, <8>; interrupt-names = "rx", "tx"; }; -- 2.3.4