All of lore.kernel.org
 help / color / mirror / Atom feed
From: "Philippe Mathieu-Daudé" <f4bug@amsat.org>
To: "Cédric Le Goater" <clg@kaod.org>,
	"Peter Maydell" <peter.maydell@linaro.org>
Cc: Andrew Jeffery <andrew@aj.id.au>,
	qemu-arm@nongnu.org, Joel Stanley <joel@jms.id.au>,
	qemu-devel@nongnu.org, Peter Delevoryas <pdel@fb.com>
Subject: Re: [PULL 14/14] hw/arm/aspeed: Add Fuji machine type
Date: Fri, 3 Sep 2021 22:39:27 +0200	[thread overview]
Message-ID: <b71cadd6-779e-f89d-5122-a1db2f43bbc3@amsat.org> (raw)
In-Reply-To: <20210903194108.131403-15-clg@kaod.org>

On 9/3/21 9:41 PM, Cédric Le Goater wrote:
> From: Peter Delevoryas <pdel@fb.com>
> 
> This adds a new machine type "fuji-bmc" based on the following device tree:
> 
> https://github.com/torvalds/linux/blob/master/arch/arm/boot/dts/aspeed-bmc-facebook-fuji.dts
> 
> Most of the i2c devices are not there, they're added here:
> 
> https://github.com/facebook/openbmc/blob/helium/meta-facebook/meta-fuji/recipes-utils/openbmc-utils/files/setup_i2c.sh
> 
> I tested this by building a Fuji image from Facebook's OpenBMC repo,
> booting, and ssh'ing from host-to-guest.
> 
> git clone https://github.com/facebook/openbmc
> cd openbmc
> ./sync_yocto.sh
> source openbmc-init-build-env fuji build-fuji
> bitbake fuji-image
> dd if=/dev/zero of=/tmp/fuji.mtd bs=1M count=128
> dd if=./tmp/deploy/images/fuji/flash-fuji of=/tmp/fuji.mtd \
>     bs=1k conv=notrunc
> 
> git clone --branch aspeed-next https://github.com/peterdelevoryas/qemu

I made a comment on this line:
https://lists.gnu.org/archive/html/qemu-devel/2021-09/msg01064.html

> cd qemu
> ./configure --target-list=arm-softmmu --disable-vnc
> make -j $(nproc)
> ./build/arm-softmmu/qemu-system-arm \
>     -machine fuji-bmc \
>     -drive file=/tmp/fuji.mtd,format=raw,if=mtd \
>     -serial stdio \
>     -nic user,hostfwd=::2222-:22
> sshpass -p 0penBmc ssh root@localhost -p 2222
> 
> Signed-off-by: Peter Delevoryas <pdel@fb.com>
> Reviewed-by: Cédric Le Goater <clg@kaod.org>
> [ clg: checkpatch fixes ]
> Message-Id: <20210903082027.704397-2-pdel@fb.com>
> Signed-off-by: Cédric Le Goater <clg@kaod.org>
> ---
>  hw/arm/aspeed.c | 116 ++++++++++++++++++++++++++++++++++++++++++++++++
>  1 file changed, 116 insertions(+)


  reply	other threads:[~2021-09-03 20:51 UTC|newest]

Thread overview: 33+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-09-03 19:40 [PULL 00/14] aspeed queue Cédric Le Goater
2021-09-03 19:40 ` [PULL 01/14] hw: arm: aspeed: Enable eth0 interface for aspeed-ast2600-evb Cédric Le Goater
2021-09-03 19:40 ` [PULL 02/14] hw: arm: aspeed: Enable mac0/1 instead of mac1/2 for g220a Cédric Le Goater
2021-09-03 19:40 ` [PULL 03/14] watchdog: aspeed: Sanitize control register values Cédric Le Goater
2021-09-03 19:40 ` [PULL 04/14] watchdog: aspeed: Fix sequential control writes Cédric Le Goater
2021-09-03 19:40 ` [PULL 05/14] hw: aspeed_gpio: Simplify 1.8V defines Cédric Le Goater
2021-09-03 19:41 ` [PULL 06/14] hw: aspeed_gpio: Clarify GPIO controller name Cédric Le Goater
2021-09-03 19:41 ` [PULL 07/14] misc/pca9552: Fix LED status register indexing in pca955x_get_led() Cédric Le Goater
2021-09-03 19:41 ` [PULL 08/14] arm/aspeed: rainier: Add i2c eeproms and muxes Cédric Le Goater
2021-09-03 19:41 ` [PULL 09/14] aspeed: Emulate the AST2600A3 Cédric Le Goater
2021-09-03 19:41 ` [PULL 10/14] hw/misc: Add Infineon DPS310 sensor model Cédric Le Goater
2021-09-03 19:41 ` [PULL 11/14] arm/aspeed: Add DPS310 to Witherspoon and Rainier Cédric Le Goater
2021-09-03 19:41 ` [PULL 12/14] hw/arm/aspeed: Initialize AST2600 UART clock selection registers Cédric Le Goater
2021-09-03 19:41 ` [PULL 13/14] hw/arm/aspeed: Allow machine to set UART default Cédric Le Goater
2021-09-03 19:41 ` [PULL 14/14] hw/arm/aspeed: Add Fuji machine type Cédric Le Goater
2021-09-03 20:39   ` Philippe Mathieu-Daudé [this message]
2021-09-03 20:41 ` [PULL 00/14] aspeed queue Philippe Mathieu-Daudé
2021-09-04  5:33   ` Cédric Le Goater
2021-09-04 23:03     ` Philippe Mathieu-Daudé
2021-09-05  8:51       ` Cédric Le Goater
2021-09-05 14:34         ` Peter Delevoryas
2021-09-05 14:43           ` Cédric Le Goater
2021-09-13 16:12 Cédric Le Goater
2021-09-13 16:13 ` [PULL 14/14] hw/arm/aspeed: Add Fuji machine type Cédric Le Goater
2021-09-14 10:56   ` Cédric Le Goater
2021-09-14 11:59     ` Peter Delevoryas
2021-09-14 12:14       ` Joel Stanley
2021-09-14 12:26         ` Peter Maydell
2021-09-14 15:22           ` Richard Henderson
2021-09-16 12:29             ` Cédric Le Goater
2021-09-16 13:53               ` Philippe Mathieu-Daudé
2021-09-16 14:06                 ` Cédric Le Goater
2021-09-16 14:07                   ` Peter Maydell
2021-09-20  8:09 [PULL 00/14] aspeed queue Cédric Le Goater
2021-09-20  8:09 ` [PULL 14/14] hw/arm/aspeed: Add Fuji machine type Cédric Le Goater

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=b71cadd6-779e-f89d-5122-a1db2f43bbc3@amsat.org \
    --to=f4bug@amsat.org \
    --cc=andrew@aj.id.au \
    --cc=clg@kaod.org \
    --cc=joel@jms.id.au \
    --cc=pdel@fb.com \
    --cc=peter.maydell@linaro.org \
    --cc=qemu-arm@nongnu.org \
    --cc=qemu-devel@nongnu.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.