Just wanted to give this a little nudge now people seem to be back on
deck...

On 01/05/17 10:55, Glenn Enright wrote:
> On 19/04/17 22:09, Juergen Gross wrote:
>> On 19/04/17 09:16, Roger Pau Monné wrote:
>>> On Wed, Apr 19, 2017 at 06:39:41AM +0200, Juergen Gross wrote:
>>>> On 19/04/17 03:02, Glenn Enright wrote:
>>>>> Thanks Juergen. I applied that, to our 4.9.23 dom0 kernel, which still
>>>>> shows the issue. When replicating the leak I now see this trace (via
>>>>> dmesg). Hopefully that is useful.
>>>>>
>>>>> Please note, I'm going to be offline next week, but am keen to keep on
>>>>> with this, it may just be a while before I followup is all.
>>>>>
>>>>> Regards, Glenn
>>>>> http://rimuhosting.com
>>>>>
>>>>>
>>>>> ------------[ cut here ]------------
>>>>> WARNING: CPU: 0 PID: 19 at drivers/block/xen-blkback/xenbus.c:508
>>>>> xen_blkbk_remove+0x138/0x140
>>>>> Modules linked in: xen_pciback xen_netback xen_gntalloc xen_gntdev
>>>>> xen_evtchn xenfs xen_privcmd xt_CT ipt_REJECT nf_reject_ipv4
>>>>> ebtable_filter ebtables xt_hashlimit xt_recent xt_state
>>>>> iptable_security
>>>>> iptable_raw igle iptable_nat nf_conntrack_ipv4 nf_defrag_ipv4
>>>>> nf_nat_ipv4 nf_nat nf_conntrack iptable_filter ip_tables bridge stp
>>>>> llc
>>>>> ipv6 crc_ccitt ppdev parport_pc parport serio_raw sg i2c_i801
>>>>> i2c_smbus
>>>>> i2c_core e1000e ptp p000_edac edac_core raid1 sd_mod ahci libahci
>>>>> floppy
>>>>> dm_mirror dm_region_hash dm_log dm_mod
>>>>> CPU: 0 PID: 19 Comm: xenwatch Not tainted 4.9.23-1.el6xen.x86_64 #1
>>>>> Hardware name: Supermicro PDSML/PDSML+, BIOS 6.00 08/27/2007
>>>>>  ffffc90040cfbba8 ffffffff8136b61f 0000000000000013 0000000000000000
>>>>>  0000000000000000 0000000000000000 ffffc90040cfbbf8 ffffffff8108007d
>>>>>  ffffea0001373fe0 000001fc33394434 ffff880000000001 ffff88004d93fac0
>>>>> Call Trace:
>>>>>  [<ffffffff8136b61f>] dump_stack+0x67/0x98
>>>>>  [<ffffffff8108007d>] __warn+0xfd/0x120
>>>>>  [<ffffffff810800bd>] warn_slowpath_null+0x1d/0x20
>>>>>  [<ffffffff814ebde8>] xen_blkbk_remove+0x138/0x140
>>>>>  [<ffffffff814497f7>] xenbus_dev_remove+0x47/0xa0
>>>>>  [<ffffffff814bcfd4>] __device_release_driver+0xb4/0x160
>>>>>  [<ffffffff814bd0ad>] device_release_driver+0x2d/0x40
>>>>>  [<ffffffff814bbfd4>] bus_remove_device+0x124/0x190
>>>>>  [<ffffffff814b93a2>] device_del+0x112/0x210
>>>>>  [<ffffffff81448113>] ? xenbus_read+0x53/0x70
>>>>>  [<ffffffff814b94c2>] device_unregister+0x22/0x60
>>>>>  [<ffffffff814ed7cd>] frontend_changed+0xad/0x4c0
>>>>>  [<ffffffff810a974e>] ? schedule_tail+0x1e/0xc0
>>>>>  [<ffffffff81449b57>] xenbus_otherend_changed+0xc7/0x140
>>>>>  [<ffffffff816f1436>] ? _raw_spin_unlock_irqrestore+0x16/0x20
>>>>>  [<ffffffff810a974e>] ? schedule_tail+0x1e/0xc0
>>>>>  [<ffffffff81449fe0>] frontend_changed+0x10/0x20
>>>>>  [<ffffffff814477fc>] xenwatch_thread+0x9c/0x140
>>>>>  [<ffffffff810bffa0>] ? woken_wake_function+0x20/0x20
>>>>>  [<ffffffff816ed93a>] ? schedule+0x3a/0xa0
>>>>>  [<ffffffff816f1436>] ? _raw_spin_unlock_irqrestore+0x16/0x20
>>>>>  [<ffffffff810c0c5d>] ? complete+0x4d/0x60
>>>>>  [<ffffffff81447760>] ? split+0xf0/0xf0
>>>>>  [<ffffffff810a051d>] kthread+0xcd/0xf0
>>>>>  [<ffffffff810a974e>] ? schedule_tail+0x1e/0xc0
>>>>>  [<ffffffff810a0450>] ? __kthread_init_worker+0x40/0x40
>>>>>  [<ffffffff810a0450>] ? __kthread_init_worker+0x40/0x40
>>>>>  [<ffffffff816f1b45>] ret_from_fork+0x25/0x30
>>>>> ---[ end trace ee097287c9865a62 ]---
>>>>
>>>> Konrad, Roger,
>>>>
>>>> this was triggered by a debug patch in xen_blkbk_remove():
>>>>
>>>>     if (be->blkif)
>>>> -        xen_blkif_disconnect(be->blkif);
>>>> +        WARN_ON(xen_blkif_disconnect(be->blkif));
>>>>
>>>> So I guess we need something like xen_blk_drain_io() in case of
>>>> calls to
>>>> xen_blkif_disconnect() which are not allowed to fail (either at the
>>>> call
>>>> sites of xen_blkif_disconnect() or in this function depending on a new
>>>> boolean parameter indicating it should wait for outstanding I/Os).
>>>>
>>>> I can try a patch, but I'd appreciate if you could confirm this
>>>> wouldn't
>>>> add further problems...
>>>
>>> Hello,
>>>
>>> Thanks for debugging this, the easiest solution seems to be to
>>> replace the
>>> ring->inflight atomic_read check in xen_blkif_disconnect with a call to
>>> xen_blk_drain_io instead, and making xen_blkif_disconnect return void
>>> (to
>>> prevent further issues like this one).
>>
>> Glenn,
>>
>> can you please try the attached patch (in dom0)?
>>
>>
>> Juergen
>>
> 
> (resending with full CC list)
> 
> I'm back. After testing unfortunately I'm still seeing the leak. The
> below trace is with the debug patch applied as well under 4.9.25. It
> looks very similar to me. I am still able to replicate this reliably.
> 
> Regards, Glenn
> http://rimuhosting.com
> 
> ------------[ cut here ]------------
> WARNING: CPU: 0 PID: 19 at drivers/block/xen-blkback/xenbus.c:511
> xen_blkbk_remove+0x138/0x140
> Modules linked in: ebt_ip xen_pciback xen_netback xen_gntalloc
> xen_gntdev xen_evtchn xenfs xen_privcmd xt_CT ipt_REJECT nf_reject_ipv4
> ebtable_filter ebtables xt_hashlimit xt_recent xt_state iptable_security
> iptable_raw iptable_mangle iptable_nat nf_conntrack_ipv4 nf_defrag_ipv4
> nf_nat_ipv4 nf_nat nf_conntrack iptable_filter ip_tables bridge stp llc
> ipv6 crc_ccitt ppdev parport_pc parport serio_raw i2c_i801 i2c_smbus
> i2c_core sg e1000e ptp pps_core i3000_edac edac_core raid1 sd_mod ahci
> libahci floppy dm_mirror dm_region_hash dm_log dm_mod
> CPU: 0 PID: 19 Comm: xenwatch Not tainted 4.9.25-1.el6xen.x86_64 #1
> Hardware name: Supermicro PDSML/PDSML+, BIOS 6.00 08/27/2007
>  ffffc90040cfbb98 ffffffff8136b76f 0000000000000013 0000000000000000
>  0000000000000000 0000000000000000 ffffc90040cfbbe8 ffffffff8108007d
>  ffffea0000141720 000001ff41334434 ffff880000000001 ffff88004d3aedc0
> Call Trace:
>  [<ffffffff8136b76f>] dump_stack+0x67/0x98
>  [<ffffffff8108007d>] __warn+0xfd/0x120
>  [<ffffffff810800bd>] warn_slowpath_null+0x1d/0x20
>  [<ffffffff814ec0a8>] xen_blkbk_remove+0x138/0x140
>  [<ffffffff81449b07>] xenbus_dev_remove+0x47/0xa0
>  [<ffffffff814bd2b4>] __device_release_driver+0xb4/0x160
>  [<ffffffff814bd38d>] device_release_driver+0x2d/0x40
>  [<ffffffff814bc2b4>] bus_remove_device+0x124/0x190
>  [<ffffffff814b9682>] device_del+0x112/0x210
>  [<ffffffff81448423>] ? xenbus_read+0x53/0x70
>  [<ffffffff814b97a2>] device_unregister+0x22/0x60
>  [<ffffffff814eda9d>] frontend_changed+0xad/0x4c0
>  [<ffffffff81449e67>] xenbus_otherend_changed+0xc7/0x140
>  [<ffffffff816f1486>] ? _raw_spin_unlock_irqrestore+0x16/0x20
>  [<ffffffff8144a2f0>] frontend_changed+0x10/0x20
>  [<ffffffff81447b0c>] xenwatch_thread+0x9c/0x140
>  [<ffffffff810bffb0>] ? woken_wake_function+0x20/0x20
>  [<ffffffff816ed98a>] ? schedule+0x3a/0xa0
>  [<ffffffff816f1486>] ? _raw_spin_unlock_irqrestore+0x16/0x20
>  [<ffffffff810c0c6d>] ? complete+0x4d/0x60
>  [<ffffffff81447a70>] ? split+0xf0/0xf0
>  [<ffffffff810a0535>] kthread+0xe5/0x100
>  [<ffffffff810a051d>] ? kthread+0xcd/0x100
>  [<ffffffff810a0450>] ? __kthread_init_worker+0x40/0x40
>  [<ffffffff810a0450>] ? __kthread_init_worker+0x40/0x40
>  [<ffffffff810a0450>] ? __kthread_init_worker+0x40/0x40
>  [<ffffffff816f1bc5>] ret_from_fork+0x25/0x30
> ---[ end trace ea3a48c80e4ad79d ]---
> 
> _______________________________________________
> Xen-devel mailing list
> Xen-devel@lists.xen.org
> https://lists.xen.org/xen-devel

-- 
Steven Haigh

Email: netwiz@crc.id.au
Web: https://www.crc.id.au
Phone: (03) 9001 6090 - 0412 935 897