All of lore.kernel.org
 help / color / mirror / Atom feed
From: Marek Vasut <marex@denx.de>
To: u-boot@lists.denx.de
Subject: [U-Boot] [U-Boot-DM] [PATCH] drivers: serial: probe all serial devices
Date: Tue, 16 Oct 2018 08:59:01 +0200	[thread overview]
Message-ID: <b900df43-0ed7-0b38-2808-0d4a38224ce8@denx.de> (raw)
In-Reply-To: <1539562189-3137-1-git-send-email-vabhav.sharma@nxp.com>

On 10/15/2018 02:09 AM, Vabhav Sharma wrote:
> Serial subsystem search and probe only one first serial
> device and unable to use remaining available UART devices

The serial devices are bound and you can switch to them. What is the
real problem ?

> This patch changes the logic to probe all available serial devices
> using platform data or device tree in DM model in order to use all
> UART devices

Get rid of the ifdeffery and copied code please.

> Signed-off-by: Vabhav Sharma <vabhav.sharma@nxp.com>
> ---
>  drivers/serial/Kconfig         | 12 ++++++++++++
>  drivers/serial/serial-uclass.c | 42 ++++++++++++++++++++++++++++++++++++++++++
>  2 files changed, 54 insertions(+)
> 
> diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig
> index 597db4b..d6451b1 100644
> --- a/drivers/serial/Kconfig
> +++ b/drivers/serial/Kconfig
> @@ -133,6 +133,18 @@ config SERIAL_SEARCH_ALL
>  
>  	  If unsure, say N.
>  
> +config SERIAL_PROBE_ALL
> +	bool "Probe all available serial devices"
> +	depends on DM_SERIAL
> +	help
> +	 The serial subsystem only probe for single serial device, but does
> +	 not probe for remaining available devices.
> +	 With this option set,we make probing for all available devices
> +	 mandatory.
> +
> +	 If probing is not required for all remaining available
> +	 devices other than default current console device, say N.
> +
>  config SPL_DM_SERIAL
>  	bool "Enable Driver Model for serial drivers in SPL"
>  	depends on DM_SERIAL && SPL_DM
> diff --git a/drivers/serial/serial-uclass.c b/drivers/serial/serial-uclass.c
> index e50f0aa..405e60e 100644
> --- a/drivers/serial/serial-uclass.c
> +++ b/drivers/serial/serial-uclass.c
> @@ -82,6 +82,13 @@ static void serial_find_console_or_panic(void)
>  		uclass_first_device(UCLASS_SERIAL, &dev);
>  		if (dev) {
>  			gd->cur_serial_dev = dev;
> +#ifdef CONFIG_SERIAL_PROBE_ALL
> +			/* Scanning uclass to probe all devices */
> +			for (;
> +			     dev;
> +			     uclass_next_device(&dev))
> +				;
> +#endif
>  			return;
>  		}
>  	} else if (CONFIG_IS_ENABLED(OF_CONTROL) && blob) {
> @@ -92,11 +99,25 @@ static void serial_find_console_or_panic(void)
>  			if (np && !uclass_get_device_by_ofnode(UCLASS_SERIAL,
>  					np_to_ofnode(np), &dev)) {
>  				gd->cur_serial_dev = dev;
> +#ifdef CONFIG_SERIAL_PROBE_ALL
> +				/* Scanning uclass to probe all devices */
> +				for (;
> +				     dev;
> +				     uclass_next_device(&dev))
> +					;
> +#endif
>  				return;
>  			}
>  		} else {
>  			if (!serial_check_stdout(blob, &dev)) {
>  				gd->cur_serial_dev = dev;
> +#ifdef CONFIG_SERIAL_PROBE_ALL
> +				/* Scanning uclass to probe all devices */
> +				for (;
> +				     dev;
> +				     uclass_next_device(&dev))
> +					;
> +#endif
>  				return;
>  			}
>  		}
> @@ -121,6 +142,13 @@ static void serial_find_console_or_panic(void)
>  		    !uclass_get_device(UCLASS_SERIAL, INDEX, &dev)) {
>  			if (dev->flags & DM_FLAG_ACTIVATED) {
>  				gd->cur_serial_dev = dev;
> +#ifdef CONFIG_SERIAL_PROBE_ALL
> +				/* Scanning uclass to probe all devices */
> +				for (;
> +				     dev;
> +				     uclass_next_device(&dev))
> +					;
> +#endif
>  				return;
>  			}
>  		}
> @@ -132,6 +160,13 @@ static void serial_find_console_or_panic(void)
>  			if (!ret) {
>  				/* Device did succeed probing */
>  				gd->cur_serial_dev = dev;
> +#ifdef CONFIG_SERIAL_PROBE_ALL
> +				/* Scanning uclass to probe all devices */
> +				for (;
> +				     dev;
> +				     uclass_next_device(&dev))
> +					;
> +#endif
>  				return;
>  			}
>  		}
> @@ -140,6 +175,13 @@ static void serial_find_console_or_panic(void)
>  		    !uclass_get_device(UCLASS_SERIAL, INDEX, &dev) ||
>  		    (!uclass_first_device(UCLASS_SERIAL, &dev) && dev)) {
>  			gd->cur_serial_dev = dev;
> +#ifdef CONFIG_SERIAL_PROBE_ALL
> +			/* Scanning uclass to probe all devices */
> +			for (;
> +			     dev;
> +			     uclass_next_device(&dev))
> +				;
> +#endif
>  			return;
>  		}
>  #endif
> 


-- 
Best regards,
Marek Vasut

  parent reply	other threads:[~2018-10-16  6:59 UTC|newest]

Thread overview: 15+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-10-15  0:09 [U-Boot] [PATCH] drivers: serial: probe all serial devices Vabhav Sharma
2018-10-15 12:28 ` Bin Meng
2018-10-16  7:23   ` Vabhav Sharma
2018-10-19  3:25   ` Simon Glass
2018-10-25 14:00     ` Vabhav Sharma
2018-10-25 14:24     ` Bin Meng
2018-10-16  6:59 ` Marek Vasut [this message]
2018-10-16  7:20   ` [U-Boot] [U-Boot-DM] " Vabhav Sharma
2018-10-16  9:09     ` Marek Vasut
2018-10-25 13:51       ` Vabhav Sharma
2018-10-25 14:04         ` Wolfgang Denk
2018-10-25 14:19           ` Vabhav Sharma
2018-10-26 11:26             ` Wolfgang Denk
2018-11-02  8:40               ` Vabhav Sharma
2018-11-02 10:07                 ` [U-Boot] " Wolfgang Denk

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=b900df43-0ed7-0b38-2808-0d4a38224ce8@denx.de \
    --to=marex@denx.de \
    --cc=u-boot@lists.denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.