From mboxrd@z Thu Jan 1 00:00:00 1970 From: Simon Horman Date: Mon, 23 Jun 2014 02:28:16 +0000 Subject: [PATCH 07/29] ARM: shmobile: r8a7790/lager dts: Add DVFS parameters into cpu0 node for r8a7790 Message-Id: List-Id: References: In-Reply-To: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: linux-arm-kernel@lists.infradead.org From: Benoit Cousson Add needed information inside CPU0 for the generic cpufreq-cpu0 driver. - voltage-tolerance = 1% It reflects the tolerance for the CPU voltage defined inside the OPP table. Due to the lack of proper OPP definition, use an arbitrary safe value. - clock-latency = 300 us Approximate worst-case latency to do a full DVFS transition for every OPPs. Due to the lack of HW information, use an arbitrary safe value. Note: The term transition-latency will be more accurate to define this value since the clock transition latency is not the only parameter that will define the overall DVFS transition. - operating-points = < kHz - uV > List of 6 operating points. All of them are using the same voltage since the valid Vmin voltage is not documented in the HW spec. - clocks phandle to the CPU clock source. This clock source is used for all the 4 CortexA15 located inside the same cluster. Signed-off-by: Benoit Cousson [gaku.inami.xw@bp.renesas.com: Change the setting of OPPs for ES2.0] Signed-off-by: Gaku Inami Acked-by: Magnus Damm Signed-off-by: Simon Horman --- arch/arm/boot/dts/r8a7790-lager.dts | 4 ++++ arch/arm/boot/dts/r8a7790.dtsi | 11 +++++++++++ 2 files changed, 15 insertions(+) diff --git a/arch/arm/boot/dts/r8a7790-lager.dts b/arch/arm/boot/dts/r8a7790-lager.dts index 6472cf0..cc65e3f 100644 --- a/arch/arm/boot/dts/r8a7790-lager.dts +++ b/arch/arm/boot/dts/r8a7790-lager.dts @@ -338,3 +338,7 @@ regulator-always-on; }; }; + +&cpu0 { + cpu0-supply = <&vdd_dvfs>; +}; diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi index e2c7d6d..e990d3c 100644 --- a/arch/arm/boot/dts/r8a7790.dtsi +++ b/arch/arm/boot/dts/r8a7790.dtsi @@ -44,6 +44,17 @@ compatible = "arm,cortex-a15"; reg = <0>; clock-frequency = <1300000000>; + voltage-tolerance = <1>; /* 1% */ + clocks = <&cpg_clocks R8A7790_CLK_Z>; + clock-latency = <300000>; /* 300 us */ + + /* kHz - uV - OPPs unknown yet */ + operating-points = <1400000 1000000>, + <1225000 1000000>, + <1050000 1000000>, + < 875000 1000000>, + < 700000 1000000>, + < 350000 1000000>; }; cpu1: cpu@1 { -- 2.0.0.rc2 From mboxrd@z Thu Jan 1 00:00:00 1970 From: horms+renesas@verge.net.au (Simon Horman) Date: Mon, 23 Jun 2014 11:28:16 +0900 Subject: [PATCH 07/29] ARM: shmobile: r8a7790/lager dts: Add DVFS parameters into cpu0 node for r8a7790 In-Reply-To: References: Message-ID: To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org From: Benoit Cousson Add needed information inside CPU0 for the generic cpufreq-cpu0 driver. - voltage-tolerance = 1% It reflects the tolerance for the CPU voltage defined inside the OPP table. Due to the lack of proper OPP definition, use an arbitrary safe value. - clock-latency = 300 us Approximate worst-case latency to do a full DVFS transition for every OPPs. Due to the lack of HW information, use an arbitrary safe value. Note: The term transition-latency will be more accurate to define this value since the clock transition latency is not the only parameter that will define the overall DVFS transition. - operating-points = < kHz - uV > List of 6 operating points. All of them are using the same voltage since the valid Vmin voltage is not documented in the HW spec. - clocks phandle to the CPU clock source. This clock source is used for all the 4 CortexA15 located inside the same cluster. Signed-off-by: Benoit Cousson [gaku.inami.xw at bp.renesas.com: Change the setting of OPPs for ES2.0] Signed-off-by: Gaku Inami Acked-by: Magnus Damm Signed-off-by: Simon Horman --- arch/arm/boot/dts/r8a7790-lager.dts | 4 ++++ arch/arm/boot/dts/r8a7790.dtsi | 11 +++++++++++ 2 files changed, 15 insertions(+) diff --git a/arch/arm/boot/dts/r8a7790-lager.dts b/arch/arm/boot/dts/r8a7790-lager.dts index 6472cf0..cc65e3f 100644 --- a/arch/arm/boot/dts/r8a7790-lager.dts +++ b/arch/arm/boot/dts/r8a7790-lager.dts @@ -338,3 +338,7 @@ regulator-always-on; }; }; + +&cpu0 { + cpu0-supply = <&vdd_dvfs>; +}; diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi index e2c7d6d..e990d3c 100644 --- a/arch/arm/boot/dts/r8a7790.dtsi +++ b/arch/arm/boot/dts/r8a7790.dtsi @@ -44,6 +44,17 @@ compatible = "arm,cortex-a15"; reg = <0>; clock-frequency = <1300000000>; + voltage-tolerance = <1>; /* 1% */ + clocks = <&cpg_clocks R8A7790_CLK_Z>; + clock-latency = <300000>; /* 300 us */ + + /* kHz - uV - OPPs unknown yet */ + operating-points = <1400000 1000000>, + <1225000 1000000>, + <1050000 1000000>, + < 875000 1000000>, + < 700000 1000000>, + < 350000 1000000>; }; cpu1: cpu at 1 { -- 2.0.0.rc2