[U-Boot] [PATCH 4/8] ARM: socfpga: arria10: Add generic handoff devicetree include

[Dalon L Westergreen <dalon.westergreen@linux.intel.com>]

On Sun, 2019-10-06 at 15:44 +0200, Marek Vasut wrote:
> On 10/6/19 1:19 AM, Dalon L Westergreen wrote:
> > On Sat, 2019-10-05 at 01:51 +0200, Marek Vasut wrote:
> > > On 10/5/19 12:30 AM, Dalon Westergreen wrote:
> > > > From: Dalon Westergreen <dalon.westergreen@intel.com>Generic handoff
> > > > devicetree include uses a header generated bythe qts-filter-a10.sh
> > > > script in mach-socfpga.  The scriptcreates the header based on
> > > > designspecific implementationsfor clock and pinmux configurations.
> > > 
> > > [...]
> > > > diff --git a/arch/arm/dts/socfpga_arria10_handoff_u-
> > > > boot.dtsib/arch/arm/dts/socfpga_arria10_handoff_u-boot.dtsi
> > > 
> > > [...]
> > > > -	clock_manager at 0xffd04000 {+	clkmgr at 0xffd04000 {+		
> > > > compatible ="altr,socfpga-a10-clk-init";+		reg =
> > > > <0xffd04000 0x00000200>;+		reg-names =
> > > > "soc_clock_manager_OCP_SLV"; 		u-boot,dm-pre-reloc;  		
> > > > mainpll {+			vco0-psrc =<MAINPLLGRP_VCO0_PSRC>;+		
> > > > 	vco1-denom =<MAINPLLGRP_VCO1_DENOM>;+			vco1-
> > > > numer =<MAINPLLGRP_VCO1_NUMER>;
> > > 
> > > But these bits are board-specific , they shouldn't be in common DT.
> > 
> > This common dtsi requires that the top level u-boot.dtsi include the
> > boardspecific header.  The formatand #define names are in fact common.
> 
> OK, I now see what you're doing here. Can you explain that in a bit moredetail
> in the commit message ?
> Basically socfpga_board.h is included socfpga_board.dts , and then
> thepreprocessor correctly expands the values from socfpga_board.h in
> thesocfpga_board.dts , so this works for multiple boards too ?

Exactly.  Will add more detail in the commit message, and slim down the included
clocks in
the u-boot.dtsi